* [PATCH v4 0/4] Add AM65x ICSSG Ethernet support
@ 2023-10-03 10:55 ` MD Danish Anwar
0 siblings, 0 replies; 16+ messages in thread
From: MD Danish Anwar @ 2023-10-03 10:55 UTC (permalink / raw)
To: Vignesh Raghavendra, Nishanth Menon
Cc: Peng Fan, Udit Kumar, Nícolas F. R. A. Prado,
Neil Armstrong, Arnd Bergmann, Konrad Dybcio, Geert Uytterhoeven,
Bjorn Andersson, Will Deacon, Catalin Marinas, Conor Dooley,
Krzysztof Kozlowski, Rob Herring, Andrew Lunn, linux-kernel,
devicetree, linux-arm-kernel, Tero Kristo, linux-omap, srk,
r-gunasekaran, MD Danish Anwar
Hi All,
This series adds support for ICSSG ethernet on AM65x SR2.0.
This series also enables TI_ICSSG_PRUETH as loadable kernel module.
This series is based on the latest next-20230925 linux-next.
This is the v4 of the series [v1]. This addresses comments made on v3.
Changes from v3 to v4:
*) Added RB tag of Andrew Davis.
*) Added LAKML to the --cc of this series as it was dropped in v3.
Changes from v2 to v3:
*) Changed comment of icssg nodes in device trees from "Dual Ethernet
application node" to "Ethernet node" as asked by Andrew L.
*) Applied k3-am654-idk.dtbo at build time to the k3-am654-base-board.dtb
in order to not have orphan DTBO as asked by Andrew D.
*) Modified k3-am654-gp-evm.dtb to have k3-am654-icssg2.dtbo as well.
Changes from v1 to v2:
*) Moved ICSSG2 nodes from k3-am654-base-board.dts to new overlay file
k3-am654-icssg2.dtso as asked by Andrew.
*) Renamed k3-am654-base-board.dts to k3-am654-common-board.dts
*) Added "Enable TI_ICSSG_PRUETH" patch to this series.
[v1] https://lore.kernel.org/all/20230911071245.2173520-1-danishanwar@ti.com/
[v2] https://lore.kernel.org/all/20230921060913.721336-1-danishanwar@ti.com/
[v3] https://lore.kernel.org/all/20230926045337.1248276-1-danishanwar@ti.com/
Thanks and Regards,
MD Danish Anwar
MD Danish Anwar (4):
arm64: dts: ti: k3-am65-main: Add ICSSG IEP nodes
arm64: dts: ti: k3-am654-base-board: add ICSSG2 Ethernet support
arm64: dts: ti: k3-am654-idk: Add ICSSG Ethernet ports
arm64: defconfig: Enable TI_ICSSG_PRUETH
arch/arm64/boot/dts/ti/Makefile | 4 +
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 36 +++
...se-board.dts => k3-am654-common-board.dts} | 0
arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso | 145 +++++++++
arch/arm64/boot/dts/ti/k3-am654-idk.dtso | 296 ++++++++++++++++++
arch/arm64/configs/defconfig | 1 +
6 files changed, 482 insertions(+)
rename arch/arm64/boot/dts/ti/{k3-am654-base-board.dts => k3-am654-common-board.dts} (100%)
create mode 100644 arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso
create mode 100644 arch/arm64/boot/dts/ti/k3-am654-idk.dtso
--
2.34.1
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v4 0/4] Add AM65x ICSSG Ethernet support
@ 2023-10-03 10:55 ` MD Danish Anwar
0 siblings, 0 replies; 16+ messages in thread
From: MD Danish Anwar @ 2023-10-03 10:55 UTC (permalink / raw)
To: Vignesh Raghavendra, Nishanth Menon
Cc: Peng Fan, Udit Kumar, Nícolas F. R. A. Prado,
Neil Armstrong, Arnd Bergmann, Konrad Dybcio, Geert Uytterhoeven,
Bjorn Andersson, Will Deacon, Catalin Marinas, Conor Dooley,
Krzysztof Kozlowski, Rob Herring, Andrew Lunn, linux-kernel,
devicetree, linux-arm-kernel, Tero Kristo, linux-omap, srk,
r-gunasekaran, MD Danish Anwar
Hi All,
This series adds support for ICSSG ethernet on AM65x SR2.0.
This series also enables TI_ICSSG_PRUETH as loadable kernel module.
This series is based on the latest next-20230925 linux-next.
This is the v4 of the series [v1]. This addresses comments made on v3.
Changes from v3 to v4:
*) Added RB tag of Andrew Davis.
*) Added LAKML to the --cc of this series as it was dropped in v3.
Changes from v2 to v3:
*) Changed comment of icssg nodes in device trees from "Dual Ethernet
application node" to "Ethernet node" as asked by Andrew L.
*) Applied k3-am654-idk.dtbo at build time to the k3-am654-base-board.dtb
in order to not have orphan DTBO as asked by Andrew D.
*) Modified k3-am654-gp-evm.dtb to have k3-am654-icssg2.dtbo as well.
Changes from v1 to v2:
*) Moved ICSSG2 nodes from k3-am654-base-board.dts to new overlay file
k3-am654-icssg2.dtso as asked by Andrew.
*) Renamed k3-am654-base-board.dts to k3-am654-common-board.dts
*) Added "Enable TI_ICSSG_PRUETH" patch to this series.
[v1] https://lore.kernel.org/all/20230911071245.2173520-1-danishanwar@ti.com/
[v2] https://lore.kernel.org/all/20230921060913.721336-1-danishanwar@ti.com/
[v3] https://lore.kernel.org/all/20230926045337.1248276-1-danishanwar@ti.com/
Thanks and Regards,
MD Danish Anwar
MD Danish Anwar (4):
arm64: dts: ti: k3-am65-main: Add ICSSG IEP nodes
arm64: dts: ti: k3-am654-base-board: add ICSSG2 Ethernet support
arm64: dts: ti: k3-am654-idk: Add ICSSG Ethernet ports
arm64: defconfig: Enable TI_ICSSG_PRUETH
arch/arm64/boot/dts/ti/Makefile | 4 +
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 36 +++
...se-board.dts => k3-am654-common-board.dts} | 0
arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso | 145 +++++++++
arch/arm64/boot/dts/ti/k3-am654-idk.dtso | 296 ++++++++++++++++++
arch/arm64/configs/defconfig | 1 +
6 files changed, 482 insertions(+)
rename arch/arm64/boot/dts/ti/{k3-am654-base-board.dts => k3-am654-common-board.dts} (100%)
create mode 100644 arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso
create mode 100644 arch/arm64/boot/dts/ti/k3-am654-idk.dtso
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v4 1/4] arm64: dts: ti: k3-am65-main: Add ICSSG IEP nodes
2023-10-03 10:55 ` MD Danish Anwar
@ 2023-10-03 10:55 ` MD Danish Anwar
-1 siblings, 0 replies; 16+ messages in thread
From: MD Danish Anwar @ 2023-10-03 10:55 UTC (permalink / raw)
To: Vignesh Raghavendra, Nishanth Menon
Cc: Peng Fan, Udit Kumar, Nícolas F. R. A. Prado,
Neil Armstrong, Arnd Bergmann, Konrad Dybcio, Geert Uytterhoeven,
Bjorn Andersson, Will Deacon, Catalin Marinas, Conor Dooley,
Krzysztof Kozlowski, Rob Herring, Andrew Lunn, linux-kernel,
devicetree, linux-arm-kernel, Tero Kristo, linux-omap, srk,
r-gunasekaran, MD Danish Anwar
The ICSSG IP on AM65x SoCs have two Industrial Ethernet Peripherals (IEPs)
to manage/generate Industrial Ethernet functions such as time stamping.
Each IEP sub-module is sourced from an internal clock mux that can be
sourced from either of the IP instance's ICSSG_IEP_GCLK or ICSSG_ICLK.
Add the IEP nodes for all the ICSSG instances.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
---
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 36 ++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index bc460033a37a..fdb042d04ad9 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -1151,6 +1151,18 @@ icssg0_iepclk_mux: iepclk-mux@30 {
};
};
+ icssg0_iep0: iep@2e000 {
+ compatible = "ti,am654-icss-iep";
+ reg = <0x2e000 0x1000>;
+ clocks = <&icssg0_iepclk_mux>;
+ };
+
+ icssg0_iep1: iep@2f000 {
+ compatible = "ti,am654-icss-iep";
+ reg = <0x2f000 0x1000>;
+ clocks = <&icssg0_iepclk_mux>;
+ };
+
icssg0_mii_rt: mii-rt@32000 {
compatible = "ti,pruss-mii", "syscon";
reg = <0x32000 0x100>;
@@ -1293,6 +1305,18 @@ icssg1_iepclk_mux: iepclk-mux@30 {
};
};
+ icssg1_iep0: iep@2e000 {
+ compatible = "ti,am654-icss-iep";
+ reg = <0x2e000 0x1000>;
+ clocks = <&icssg1_iepclk_mux>;
+ };
+
+ icssg1_iep1: iep@2f000 {
+ compatible = "ti,am654-icss-iep";
+ reg = <0x2f000 0x1000>;
+ clocks = <&icssg1_iepclk_mux>;
+ };
+
icssg1_mii_rt: mii-rt@32000 {
compatible = "ti,pruss-mii", "syscon";
reg = <0x32000 0x100>;
@@ -1435,6 +1459,18 @@ icssg2_iepclk_mux: iepclk-mux@30 {
};
};
+ icssg2_iep0: iep@2e000 {
+ compatible = "ti,am654-icss-iep";
+ reg = <0x2e000 0x1000>;
+ clocks = <&icssg2_iepclk_mux>;
+ };
+
+ icssg2_iep1: iep@2f000 {
+ compatible = "ti,am654-icss-iep";
+ reg = <0x2f000 0x1000>;
+ clocks = <&icssg2_iepclk_mux>;
+ };
+
icssg2_mii_rt: mii-rt@32000 {
compatible = "ti,pruss-mii", "syscon";
reg = <0x32000 0x100>;
--
2.34.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v4 1/4] arm64: dts: ti: k3-am65-main: Add ICSSG IEP nodes
@ 2023-10-03 10:55 ` MD Danish Anwar
0 siblings, 0 replies; 16+ messages in thread
From: MD Danish Anwar @ 2023-10-03 10:55 UTC (permalink / raw)
To: Vignesh Raghavendra, Nishanth Menon
Cc: Peng Fan, Udit Kumar, Nícolas F. R. A. Prado,
Neil Armstrong, Arnd Bergmann, Konrad Dybcio, Geert Uytterhoeven,
Bjorn Andersson, Will Deacon, Catalin Marinas, Conor Dooley,
Krzysztof Kozlowski, Rob Herring, Andrew Lunn, linux-kernel,
devicetree, linux-arm-kernel, Tero Kristo, linux-omap, srk,
r-gunasekaran, MD Danish Anwar
The ICSSG IP on AM65x SoCs have two Industrial Ethernet Peripherals (IEPs)
to manage/generate Industrial Ethernet functions such as time stamping.
Each IEP sub-module is sourced from an internal clock mux that can be
sourced from either of the IP instance's ICSSG_IEP_GCLK or ICSSG_ICLK.
Add the IEP nodes for all the ICSSG instances.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
---
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 36 ++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index bc460033a37a..fdb042d04ad9 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -1151,6 +1151,18 @@ icssg0_iepclk_mux: iepclk-mux@30 {
};
};
+ icssg0_iep0: iep@2e000 {
+ compatible = "ti,am654-icss-iep";
+ reg = <0x2e000 0x1000>;
+ clocks = <&icssg0_iepclk_mux>;
+ };
+
+ icssg0_iep1: iep@2f000 {
+ compatible = "ti,am654-icss-iep";
+ reg = <0x2f000 0x1000>;
+ clocks = <&icssg0_iepclk_mux>;
+ };
+
icssg0_mii_rt: mii-rt@32000 {
compatible = "ti,pruss-mii", "syscon";
reg = <0x32000 0x100>;
@@ -1293,6 +1305,18 @@ icssg1_iepclk_mux: iepclk-mux@30 {
};
};
+ icssg1_iep0: iep@2e000 {
+ compatible = "ti,am654-icss-iep";
+ reg = <0x2e000 0x1000>;
+ clocks = <&icssg1_iepclk_mux>;
+ };
+
+ icssg1_iep1: iep@2f000 {
+ compatible = "ti,am654-icss-iep";
+ reg = <0x2f000 0x1000>;
+ clocks = <&icssg1_iepclk_mux>;
+ };
+
icssg1_mii_rt: mii-rt@32000 {
compatible = "ti,pruss-mii", "syscon";
reg = <0x32000 0x100>;
@@ -1435,6 +1459,18 @@ icssg2_iepclk_mux: iepclk-mux@30 {
};
};
+ icssg2_iep0: iep@2e000 {
+ compatible = "ti,am654-icss-iep";
+ reg = <0x2e000 0x1000>;
+ clocks = <&icssg2_iepclk_mux>;
+ };
+
+ icssg2_iep1: iep@2f000 {
+ compatible = "ti,am654-icss-iep";
+ reg = <0x2f000 0x1000>;
+ clocks = <&icssg2_iepclk_mux>;
+ };
+
icssg2_mii_rt: mii-rt@32000 {
compatible = "ti,pruss-mii", "syscon";
reg = <0x32000 0x100>;
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v4 2/4] arm64: dts: ti: k3-am654-base-board: add ICSSG2 Ethernet support
2023-10-03 10:55 ` MD Danish Anwar
@ 2023-10-03 10:55 ` MD Danish Anwar
-1 siblings, 0 replies; 16+ messages in thread
From: MD Danish Anwar @ 2023-10-03 10:55 UTC (permalink / raw)
To: Vignesh Raghavendra, Nishanth Menon
Cc: Peng Fan, Udit Kumar, Nícolas F. R. A. Prado,
Neil Armstrong, Arnd Bergmann, Konrad Dybcio, Geert Uytterhoeven,
Bjorn Andersson, Will Deacon, Catalin Marinas, Conor Dooley,
Krzysztof Kozlowski, Rob Herring, Andrew Lunn, linux-kernel,
devicetree, linux-arm-kernel, Tero Kristo, linux-omap, srk,
r-gunasekaran, MD Danish Anwar, Andrew Davis
ICSSG2 provides dual Gigabit Ethernet support.
For support SR2.0 ICSSG Ethernet firmware:
- provide different firmware blobs and use TX_PRU.
- IEP0 is used as PTP Hardware Clock and can only be used for one port.
- TX timestamp notification comes via INTC interrupt.
Reviewed-by: Andrew Davis <afd@ti.com>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
---
arch/arm64/boot/dts/ti/Makefile | 2 +
...se-board.dts => k3-am654-common-board.dts} | 0
arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso | 145 ++++++++++++++++++
3 files changed, 147 insertions(+)
rename arch/arm64/boot/dts/ti/{k3-am654-base-board.dts => k3-am654-common-board.dts} (100%)
create mode 100644 arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index e7b8e2e7f083..8f5c9515777e 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -42,12 +42,14 @@ dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl-sdcard.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl-wlan.dtb
# Boards with AM65x SoC
+k3-am654-base-board-dtbs := k3-am654-common-board.dtb k3-am654-icssg2.dtbo
k3-am654-gp-evm-dtbs := k3-am654-base-board.dtb k3-am654-base-board-rocktech-rk101-panel.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic-pg2.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-m2.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am654-common-board.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am654-gp-evm.dtb
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-common-board.dts
similarity index 100%
rename from arch/arm64/boot/dts/ti/k3-am654-base-board.dts
rename to arch/arm64/boot/dts/ti/k3-am654-common-board.dts
diff --git a/arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso b/arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso
new file mode 100644
index 000000000000..7b7d32282668
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * DT overlay for IDK application board on AM654 EVM
+ *
+ * Copyright (C) 2018-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include "k3-pinctrl.h"
+
+&{/} {
+ aliases {
+ ethernet1 = &icssg2_emac0;
+ ethernet2 = &icssg2_emac1;
+ };
+
+ /* Ethernet node on PRU-ICSSG2 */
+ icssg2_eth: icssg2-eth {
+ compatible = "ti,am654-icssg-prueth";
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg2_rgmii_pins_default>;
+ sram = <&msmc_ram>;
+ ti,prus = <&pru2_0>, <&rtu2_0>, <&tx_pru2_0>,
+ <&pru2_1>, <&rtu2_1>, <&tx_pru2_1>;
+ firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-rtu0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-txpru0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-pru1-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-rtu1-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-txpru1-prueth-fw.elf";
+
+ ti,pruss-gp-mux-sel = <2>, /* MII mode */
+ <2>,
+ <2>,
+ <2>, /* MII mode */
+ <2>,
+ <2>;
+
+ ti,mii-g-rt = <&icssg2_mii_g_rt>;
+ ti,mii-rt = <&icssg2_mii_rt>;
+ ti,iep = <&icssg2_iep0>, <&icssg2_iep1>;
+
+ interrupt-parent = <&icssg2_intc>;
+ interrupts = <24 0 2>, <25 1 3>;
+ interrupt-names = "tx_ts0", "tx_ts1";
+
+ dmas = <&main_udmap 0xc300>, /* egress slice 0 */
+ <&main_udmap 0xc301>, /* egress slice 0 */
+ <&main_udmap 0xc302>, /* egress slice 0 */
+ <&main_udmap 0xc303>, /* egress slice 0 */
+ <&main_udmap 0xc304>, /* egress slice 1 */
+ <&main_udmap 0xc305>, /* egress slice 1 */
+ <&main_udmap 0xc306>, /* egress slice 1 */
+ <&main_udmap 0xc307>, /* egress slice 1 */
+ <&main_udmap 0x4300>, /* ingress slice 0 */
+ <&main_udmap 0x4301>; /* ingress slice 1 */
+
+ dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
+ "tx1-0", "tx1-1", "tx1-2", "tx1-3",
+ "rx0", "rx1";
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ icssg2_emac0: port@0 {
+ reg = <0>;
+ phy-handle = <&icssg2_phy0>;
+ phy-mode = "rgmii-id";
+ ti,syscon-rgmii-delay = <&scm_conf 0x4120>;
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ icssg2_emac1: port@1 {
+ reg = <1>;
+ phy-handle = <&icssg2_phy1>;
+ phy-mode = "rgmii-id";
+ ti,syscon-rgmii-delay = <&scm_conf 0x4124>;
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ };
+ };
+};
+
+&main_pmx0 {
+
+ icssg2_mdio_pins_default: icssg2-mdio-default-pins {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x0094, PIN_INPUT, 2) /* (AC19) PRG2_PRU0_GPO7.PRG2_MDIO0_MDIO */
+ AM65X_IOPAD(0x00c8, PIN_OUTPUT, 2) /* (AE15) PRG2_PRU1_GPO7.PRG2_MDIO0_MDC */
+ >;
+ };
+
+ icssg2_rgmii_pins_default: icssg2-rgmii-default-pins {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x00ac, PIN_INPUT, 2) /* (AH15) PRG2_PRU1_GPO0.PRG2_RGMII2_RD0 */
+ AM65X_IOPAD(0x00b0, PIN_INPUT, 2) /* (AC16) PRG2_PRU1_GPO1.PRG2_RGMII2_RD1 */
+ AM65X_IOPAD(0x00b4, PIN_INPUT, 2) /* (AD17) PRG2_PRU1_GPO2.PRG2_RGMII2_RD2 */
+ AM65X_IOPAD(0x00b8, PIN_INPUT, 2) /* (AH14) PRG2_PRU1_GPO3.PRG2_RGMII2_RD3 */
+ AM65X_IOPAD(0x00cc, PIN_OUTPUT, 2) /* (AD15) PRG2_PRU1_GPO8.PRG2_RGMII2_TD0 */
+ AM65X_IOPAD(0x00d0, PIN_OUTPUT, 2) /* (AF14) PRG2_PRU1_GPO9.PRG2_RGMII2_TD1 */
+ AM65X_IOPAD(0x00d4, PIN_OUTPUT, 2) /* (AC15) PRG2_PRU1_GPO10.PRG2_RGMII2_TD2 */
+ AM65X_IOPAD(0x00d8, PIN_OUTPUT, 2) /* (AD14) PRG2_PRU1_GPO11.PRG2_RGMII2_TD3 */
+ AM65X_IOPAD(0x00dc, PIN_INPUT, 2) /* (AE14) PRG2_PRU1_GPO16.PRG2_RGMII2_TXC */
+ AM65X_IOPAD(0x00c4, PIN_OUTPUT, 2) /* (AC17) PRG2_PRU1_GPO6.PRG2_RGMII2_TX_CTL */
+ AM65X_IOPAD(0x00c0, PIN_INPUT, 2) /* (AG15) PRG2_PRU1_GPO5.PRG2_RGMII2_RXC */
+ AM65X_IOPAD(0x00bc, PIN_INPUT, 2) /* (AG14) PRG2_PRU1_GPO4.PRG2_RGMII2_RX_CTL */
+
+ AM65X_IOPAD(0x0078, PIN_INPUT, 2) /* (AF18) PRG2_PRU0_GPO0.PRG2_RGMII1_RD0 */
+ AM65X_IOPAD(0x007c, PIN_INPUT, 2) /* (AE18) PRG2_PRU0_GPO1.PRG2_RGMII1_RD1 */
+ AM65X_IOPAD(0x0080, PIN_INPUT, 2) /* (AH17) PRG2_PRU0_GPO2.PRG2_RGMII1_RD2 */
+ AM65X_IOPAD(0x0084, PIN_INPUT, 2) /* (AG18) PRG2_PRU0_GPO3.PRG2_RGMII1_RD3 */
+ AM65X_IOPAD(0x0098, PIN_OUTPUT, 2) /* (AH16) PRG2_PRU0_GPO8.PRG2_RGMII1_TD0 */
+ AM65X_IOPAD(0x009c, PIN_OUTPUT, 2) /* (AG16) PRG2_PRU0_GPO9.PRG2_RGMII1_TD1 */
+ AM65X_IOPAD(0x00a0, PIN_OUTPUT, 2) /* (AF16) PRG2_PRU0_GPO10.PRG2_RGMII1_TD2 */
+ AM65X_IOPAD(0x00a4, PIN_OUTPUT, 2) /* (AE16) PRG2_PRU0_GPO11.PRG2_RGMII1_TD3 */
+ AM65X_IOPAD(0x00a8, PIN_INPUT, 2) /* (AD16) PRG2_PRU0_GPO16.PRG2_RGMII1_TXC */
+ AM65X_IOPAD(0x0090, PIN_OUTPUT, 2) /* (AE17) PRG2_PRU0_GPO6.PRG2_RGMII1_TX_CTL */
+ AM65X_IOPAD(0x008c, PIN_INPUT, 2) /* (AF17) PRG2_PRU0_GPO5.PRG2_RGMII1_RXC */
+ AM65X_IOPAD(0x0088, PIN_INPUT, 2) /* (AG17) PRG2_PRU0_GPO4.PRG2_RGMII1_RX_CTL */
+ >;
+ };
+};
+
+&icssg2_mdio {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg2_mdio_pins_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ icssg2_phy0: ethernet-phy@0 {
+ reg = <0>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ };
+
+ icssg2_phy1: ethernet-phy@3 {
+ reg = <3>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ };
+};
--
2.34.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v4 2/4] arm64: dts: ti: k3-am654-base-board: add ICSSG2 Ethernet support
@ 2023-10-03 10:55 ` MD Danish Anwar
0 siblings, 0 replies; 16+ messages in thread
From: MD Danish Anwar @ 2023-10-03 10:55 UTC (permalink / raw)
To: Vignesh Raghavendra, Nishanth Menon
Cc: Peng Fan, Udit Kumar, Nícolas F. R. A. Prado,
Neil Armstrong, Arnd Bergmann, Konrad Dybcio, Geert Uytterhoeven,
Bjorn Andersson, Will Deacon, Catalin Marinas, Conor Dooley,
Krzysztof Kozlowski, Rob Herring, Andrew Lunn, linux-kernel,
devicetree, linux-arm-kernel, Tero Kristo, linux-omap, srk,
r-gunasekaran, MD Danish Anwar, Andrew Davis
ICSSG2 provides dual Gigabit Ethernet support.
For support SR2.0 ICSSG Ethernet firmware:
- provide different firmware blobs and use TX_PRU.
- IEP0 is used as PTP Hardware Clock and can only be used for one port.
- TX timestamp notification comes via INTC interrupt.
Reviewed-by: Andrew Davis <afd@ti.com>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
---
arch/arm64/boot/dts/ti/Makefile | 2 +
...se-board.dts => k3-am654-common-board.dts} | 0
arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso | 145 ++++++++++++++++++
3 files changed, 147 insertions(+)
rename arch/arm64/boot/dts/ti/{k3-am654-base-board.dts => k3-am654-common-board.dts} (100%)
create mode 100644 arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index e7b8e2e7f083..8f5c9515777e 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -42,12 +42,14 @@ dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl-sdcard.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl-wlan.dtb
# Boards with AM65x SoC
+k3-am654-base-board-dtbs := k3-am654-common-board.dtb k3-am654-icssg2.dtbo
k3-am654-gp-evm-dtbs := k3-am654-base-board.dtb k3-am654-base-board-rocktech-rk101-panel.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic-pg2.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-m2.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am654-common-board.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am654-gp-evm.dtb
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-common-board.dts
similarity index 100%
rename from arch/arm64/boot/dts/ti/k3-am654-base-board.dts
rename to arch/arm64/boot/dts/ti/k3-am654-common-board.dts
diff --git a/arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso b/arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso
new file mode 100644
index 000000000000..7b7d32282668
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * DT overlay for IDK application board on AM654 EVM
+ *
+ * Copyright (C) 2018-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include "k3-pinctrl.h"
+
+&{/} {
+ aliases {
+ ethernet1 = &icssg2_emac0;
+ ethernet2 = &icssg2_emac1;
+ };
+
+ /* Ethernet node on PRU-ICSSG2 */
+ icssg2_eth: icssg2-eth {
+ compatible = "ti,am654-icssg-prueth";
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg2_rgmii_pins_default>;
+ sram = <&msmc_ram>;
+ ti,prus = <&pru2_0>, <&rtu2_0>, <&tx_pru2_0>,
+ <&pru2_1>, <&rtu2_1>, <&tx_pru2_1>;
+ firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-rtu0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-txpru0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-pru1-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-rtu1-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-txpru1-prueth-fw.elf";
+
+ ti,pruss-gp-mux-sel = <2>, /* MII mode */
+ <2>,
+ <2>,
+ <2>, /* MII mode */
+ <2>,
+ <2>;
+
+ ti,mii-g-rt = <&icssg2_mii_g_rt>;
+ ti,mii-rt = <&icssg2_mii_rt>;
+ ti,iep = <&icssg2_iep0>, <&icssg2_iep1>;
+
+ interrupt-parent = <&icssg2_intc>;
+ interrupts = <24 0 2>, <25 1 3>;
+ interrupt-names = "tx_ts0", "tx_ts1";
+
+ dmas = <&main_udmap 0xc300>, /* egress slice 0 */
+ <&main_udmap 0xc301>, /* egress slice 0 */
+ <&main_udmap 0xc302>, /* egress slice 0 */
+ <&main_udmap 0xc303>, /* egress slice 0 */
+ <&main_udmap 0xc304>, /* egress slice 1 */
+ <&main_udmap 0xc305>, /* egress slice 1 */
+ <&main_udmap 0xc306>, /* egress slice 1 */
+ <&main_udmap 0xc307>, /* egress slice 1 */
+ <&main_udmap 0x4300>, /* ingress slice 0 */
+ <&main_udmap 0x4301>; /* ingress slice 1 */
+
+ dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
+ "tx1-0", "tx1-1", "tx1-2", "tx1-3",
+ "rx0", "rx1";
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ icssg2_emac0: port@0 {
+ reg = <0>;
+ phy-handle = <&icssg2_phy0>;
+ phy-mode = "rgmii-id";
+ ti,syscon-rgmii-delay = <&scm_conf 0x4120>;
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ icssg2_emac1: port@1 {
+ reg = <1>;
+ phy-handle = <&icssg2_phy1>;
+ phy-mode = "rgmii-id";
+ ti,syscon-rgmii-delay = <&scm_conf 0x4124>;
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ };
+ };
+};
+
+&main_pmx0 {
+
+ icssg2_mdio_pins_default: icssg2-mdio-default-pins {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x0094, PIN_INPUT, 2) /* (AC19) PRG2_PRU0_GPO7.PRG2_MDIO0_MDIO */
+ AM65X_IOPAD(0x00c8, PIN_OUTPUT, 2) /* (AE15) PRG2_PRU1_GPO7.PRG2_MDIO0_MDC */
+ >;
+ };
+
+ icssg2_rgmii_pins_default: icssg2-rgmii-default-pins {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x00ac, PIN_INPUT, 2) /* (AH15) PRG2_PRU1_GPO0.PRG2_RGMII2_RD0 */
+ AM65X_IOPAD(0x00b0, PIN_INPUT, 2) /* (AC16) PRG2_PRU1_GPO1.PRG2_RGMII2_RD1 */
+ AM65X_IOPAD(0x00b4, PIN_INPUT, 2) /* (AD17) PRG2_PRU1_GPO2.PRG2_RGMII2_RD2 */
+ AM65X_IOPAD(0x00b8, PIN_INPUT, 2) /* (AH14) PRG2_PRU1_GPO3.PRG2_RGMII2_RD3 */
+ AM65X_IOPAD(0x00cc, PIN_OUTPUT, 2) /* (AD15) PRG2_PRU1_GPO8.PRG2_RGMII2_TD0 */
+ AM65X_IOPAD(0x00d0, PIN_OUTPUT, 2) /* (AF14) PRG2_PRU1_GPO9.PRG2_RGMII2_TD1 */
+ AM65X_IOPAD(0x00d4, PIN_OUTPUT, 2) /* (AC15) PRG2_PRU1_GPO10.PRG2_RGMII2_TD2 */
+ AM65X_IOPAD(0x00d8, PIN_OUTPUT, 2) /* (AD14) PRG2_PRU1_GPO11.PRG2_RGMII2_TD3 */
+ AM65X_IOPAD(0x00dc, PIN_INPUT, 2) /* (AE14) PRG2_PRU1_GPO16.PRG2_RGMII2_TXC */
+ AM65X_IOPAD(0x00c4, PIN_OUTPUT, 2) /* (AC17) PRG2_PRU1_GPO6.PRG2_RGMII2_TX_CTL */
+ AM65X_IOPAD(0x00c0, PIN_INPUT, 2) /* (AG15) PRG2_PRU1_GPO5.PRG2_RGMII2_RXC */
+ AM65X_IOPAD(0x00bc, PIN_INPUT, 2) /* (AG14) PRG2_PRU1_GPO4.PRG2_RGMII2_RX_CTL */
+
+ AM65X_IOPAD(0x0078, PIN_INPUT, 2) /* (AF18) PRG2_PRU0_GPO0.PRG2_RGMII1_RD0 */
+ AM65X_IOPAD(0x007c, PIN_INPUT, 2) /* (AE18) PRG2_PRU0_GPO1.PRG2_RGMII1_RD1 */
+ AM65X_IOPAD(0x0080, PIN_INPUT, 2) /* (AH17) PRG2_PRU0_GPO2.PRG2_RGMII1_RD2 */
+ AM65X_IOPAD(0x0084, PIN_INPUT, 2) /* (AG18) PRG2_PRU0_GPO3.PRG2_RGMII1_RD3 */
+ AM65X_IOPAD(0x0098, PIN_OUTPUT, 2) /* (AH16) PRG2_PRU0_GPO8.PRG2_RGMII1_TD0 */
+ AM65X_IOPAD(0x009c, PIN_OUTPUT, 2) /* (AG16) PRG2_PRU0_GPO9.PRG2_RGMII1_TD1 */
+ AM65X_IOPAD(0x00a0, PIN_OUTPUT, 2) /* (AF16) PRG2_PRU0_GPO10.PRG2_RGMII1_TD2 */
+ AM65X_IOPAD(0x00a4, PIN_OUTPUT, 2) /* (AE16) PRG2_PRU0_GPO11.PRG2_RGMII1_TD3 */
+ AM65X_IOPAD(0x00a8, PIN_INPUT, 2) /* (AD16) PRG2_PRU0_GPO16.PRG2_RGMII1_TXC */
+ AM65X_IOPAD(0x0090, PIN_OUTPUT, 2) /* (AE17) PRG2_PRU0_GPO6.PRG2_RGMII1_TX_CTL */
+ AM65X_IOPAD(0x008c, PIN_INPUT, 2) /* (AF17) PRG2_PRU0_GPO5.PRG2_RGMII1_RXC */
+ AM65X_IOPAD(0x0088, PIN_INPUT, 2) /* (AG17) PRG2_PRU0_GPO4.PRG2_RGMII1_RX_CTL */
+ >;
+ };
+};
+
+&icssg2_mdio {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg2_mdio_pins_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ icssg2_phy0: ethernet-phy@0 {
+ reg = <0>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ };
+
+ icssg2_phy1: ethernet-phy@3 {
+ reg = <3>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ };
+};
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v4 3/4] arm64: dts: ti: k3-am654-idk: Add ICSSG Ethernet ports
2023-10-03 10:55 ` MD Danish Anwar
@ 2023-10-03 10:55 ` MD Danish Anwar
-1 siblings, 0 replies; 16+ messages in thread
From: MD Danish Anwar @ 2023-10-03 10:55 UTC (permalink / raw)
To: Vignesh Raghavendra, Nishanth Menon
Cc: Peng Fan, Udit Kumar, Nícolas F. R. A. Prado,
Neil Armstrong, Arnd Bergmann, Konrad Dybcio, Geert Uytterhoeven,
Bjorn Andersson, Will Deacon, Catalin Marinas, Conor Dooley,
Krzysztof Kozlowski, Rob Herring, Andrew Lunn, linux-kernel,
devicetree, linux-arm-kernel, Tero Kristo, linux-omap, srk,
r-gunasekaran, MD Danish Anwar
The IDK application board has 4 Gigabit Ethernet ports.
This patch adds support for the 4 Gigabit Ethernet ports
which are provided by ICSSG0 and ICSSG1.
The IEP0 SYNC_OUT0 pins are used for PPS out on the IDK card.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
---
arch/arm64/boot/dts/ti/Makefile | 2 +
arch/arm64/boot/dts/ti/k3-am654-idk.dtso | 296 +++++++++++++++++++++++
2 files changed, 298 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-am654-idk.dtso
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 8f5c9515777e..7f2d6099b2f4 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -44,6 +44,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl-wlan.dtb
# Boards with AM65x SoC
k3-am654-base-board-dtbs := k3-am654-common-board.dtb k3-am654-icssg2.dtbo
k3-am654-gp-evm-dtbs := k3-am654-base-board.dtb k3-am654-base-board-rocktech-rk101-panel.dtbo
+k3-am654-idk-dtbs := k3-am654-base-board.dtb k3-am654-idk.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic-pg2.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb
@@ -52,6 +53,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am654-common-board.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am654-gp-evm.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am654-idk.dtb
# Boards with J7200 SoC
k3-j7200-evm-dtbs := k3-j7200-common-proc-board.dtb k3-j7200-evm-quad-port-eth-exp.dtbo
diff --git a/arch/arm64/boot/dts/ti/k3-am654-idk.dtso b/arch/arm64/boot/dts/ti/k3-am654-idk.dtso
new file mode 100644
index 000000000000..150428dfce6f
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am654-idk.dtso
@@ -0,0 +1,296 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * DT overlay for IDK application board on AM654 EVM
+ *
+ * Copyright (C) 2018-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include "k3-pinctrl.h"
+
+&{/} {
+ aliases {
+ ethernet3 = "/icssg0-eth/ethernet-ports/port@0";
+ ethernet4 = "/icssg0-eth/ethernet-ports/port@1";
+ ethernet5 = "/icssg1-eth/ethernet-ports/port@0";
+ ethernet6 = "/icssg1-eth/ethernet-ports/port@1";
+ };
+
+ /* Ethernet node on PRU-ICSSG0 */
+ icssg0_eth: icssg0-eth {
+ compatible = "ti,am654-icssg-prueth";
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg0_rgmii_pins_default>;
+ sram = <&msmc_ram>;
+ ti,prus = <&pru0_0>, <&rtu0_0>, <&tx_pru0_0>, <&pru0_1>, <&rtu0_1>, <&tx_pru0_1>;
+ firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-rtu0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-txpru0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-pru1-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-rtu1-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-txpru1-prueth-fw.elf";
+
+ ti,pruss-gp-mux-sel = <2>, /* MII mode */
+ <2>,
+ <2>,
+ <2>, /* MII mode */
+ <2>,
+ <2>;
+
+ ti,mii-g-rt = <&icssg0_mii_g_rt>;
+ ti,mii-rt = <&icssg0_mii_rt>;
+ ti,iep = <&icssg0_iep0>, <&icssg0_iep1>;
+
+ interrupt-parent = <&icssg0_intc>;
+ interrupts = <24 0 2>, <25 1 3>;
+ interrupt-names = "tx_ts0", "tx_ts1";
+
+ dmas = <&main_udmap 0xc100>, /* egress slice 0 */
+ <&main_udmap 0xc101>, /* egress slice 0 */
+ <&main_udmap 0xc102>, /* egress slice 0 */
+ <&main_udmap 0xc103>, /* egress slice 0 */
+ <&main_udmap 0xc104>, /* egress slice 1 */
+ <&main_udmap 0xc105>, /* egress slice 1 */
+ <&main_udmap 0xc106>, /* egress slice 1 */
+ <&main_udmap 0xc107>, /* egress slice 1 */
+
+ <&main_udmap 0x4100>, /* ingress slice 0 */
+ <&main_udmap 0x4101>, /* ingress slice 1 */
+ <&main_udmap 0x4102>, /* mgmnt rsp slice 0 */
+ <&main_udmap 0x4103>; /* mgmnt rsp slice 1 */
+ dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
+ "tx1-0", "tx1-1", "tx1-2", "tx1-3",
+ "rx0", "rx1";
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ icssg0_emac0: port@0 {
+ reg = <0>;
+ phy-handle = <&icssg0_phy0>;
+ phy-mode = "rgmii-id";
+ ti,syscon-rgmii-delay = <&scm_conf 0x4100>;
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ icssg0_emac1: port@1 {
+ reg = <1>;
+ phy-handle = <&icssg0_phy1>;
+ phy-mode = "rgmii-id";
+ ti,syscon-rgmii-delay = <&scm_conf 0x4104>;
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ };
+ };
+
+ /* Ethernet node on PRU-ICSSG1 */
+ icssg1_eth: icssg1-eth {
+ compatible = "ti,am654-icssg-prueth";
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg1_rgmii_pins_default>;
+ sram = <&msmc_ram>;
+ ti,prus = <&pru1_0>, <&rtu1_0>, <&tx_pru1_0>, <&pru1_1>, <&rtu1_1>, <&tx_pru1_1>;
+ firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-rtu0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-txpru0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-pru1-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-rtu1-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-txpru1-prueth-fw.elf";
+
+ ti,pruss-gp-mux-sel = <2>, /* MII mode */
+ <2>,
+ <2>,
+ <2>, /* MII mode */
+ <2>,
+ <2>;
+
+ ti,mii-g-rt = <&icssg1_mii_g_rt>;
+ ti,mii-rt = <&icssg1_mii_rt>;
+ ti,iep = <&icssg1_iep0>, <&icssg1_iep1>;
+
+ interrupt-parent = <&icssg1_intc>;
+ interrupts = <24 0 2>, <25 1 3>;
+ interrupt-names = "tx_ts0", "tx_ts1";
+
+ dmas = <&main_udmap 0xc200>, /* egress slice 0 */
+ <&main_udmap 0xc201>, /* egress slice 0 */
+ <&main_udmap 0xc202>, /* egress slice 0 */
+ <&main_udmap 0xc203>, /* egress slice 0 */
+ <&main_udmap 0xc204>, /* egress slice 1 */
+ <&main_udmap 0xc205>, /* egress slice 1 */
+ <&main_udmap 0xc206>, /* egress slice 1 */
+ <&main_udmap 0xc207>, /* egress slice 1 */
+
+ <&main_udmap 0x4200>, /* ingress slice 0 */
+ <&main_udmap 0x4201>, /* ingress slice 1 */
+ <&main_udmap 0x4202>, /* mgmnt rsp slice 0 */
+ <&main_udmap 0x4203>; /* mgmnt rsp slice 1 */
+ dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
+ "tx1-0", "tx1-1", "tx1-2", "tx1-3",
+ "rx0", "rx1";
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ icssg1_emac0: port@0 {
+ reg = <0>;
+ phy-handle = <&icssg1_phy0>;
+ phy-mode = "rgmii-id";
+ ti,syscon-rgmii-delay = <&scm_conf 0x4110>;
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ icssg1_emac1: port@1 {
+ reg = <1>;
+ phy-handle = <&icssg1_phy1>;
+ phy-mode = "rgmii-id";
+ ti,syscon-rgmii-delay = <&scm_conf 0x4114>;
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ };
+ };
+};
+
+&main_pmx0 {
+
+ icssg0_mdio_pins_default: icssg0-mdio-default-pins {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x0294, PIN_INPUT, 0) /* (AE26) PRG0_MDIO0_MDIO */
+ AM65X_IOPAD(0x0298, PIN_OUTPUT, 0) /* (AE28) PRG0_MDIO0_MDC */
+ >;
+ };
+
+ icssg0_rgmii_pins_default: icssg0-rgmii-default-pins {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x0244, PIN_INPUT, 2) /* (AB28) PRG0_PRU1_GPO0.PRG0_RGMII2_RD0 */
+ AM65X_IOPAD(0x0248, PIN_INPUT, 2) /* (AC28) PRG0_PRU1_GPO1.PRG0_RGMII2_RD1 */
+ AM65X_IOPAD(0x024c, PIN_INPUT, 2) /* (AC27) PRG0_PRU1_GPO2.PRG0_RGMII2_RD2 */
+ AM65X_IOPAD(0x0250, PIN_INPUT, 2) /* (AB26) PRG0_PRU1_GPO3.PRG0_RGMII2_RD3 */
+ AM65X_IOPAD(0x0274, PIN_OUTPUT, 2) /* (AC25) PRG0_PRU1_GPO12.PRG0_RGMII2_TD0 */
+ AM65X_IOPAD(0x0278, PIN_OUTPUT, 2) /* (AD25) PRG0_PRU1_GPO13.PRG0_RGMII2_TD1 */
+ AM65X_IOPAD(0x027c, PIN_OUTPUT, 2) /* (AD24) PRG0_PRU1_GPO14.PRG0_RGMII2_TD2 */
+ AM65X_IOPAD(0x0280, PIN_OUTPUT, 2) /* (AE27) PRG0_PRU1_GPO15.PRG0_RGMII2_TD3 */
+ AM65X_IOPAD(0x0284, PIN_INPUT, 2) /* (AC24) PRG0_PRU1_GPO16.PRG0_RGMII2_TXC */
+ AM65X_IOPAD(0x0270, PIN_OUTPUT, 2) /* (AB24) PRG0_PRU1_GPO11.PRG0_RGMII2_TX_CTL */
+ AM65X_IOPAD(0x025c, PIN_INPUT, 2) /* (AB27) PRG0_PRU1_GPO6.PRG0_RGMII2_RXC */
+ AM65X_IOPAD(0x0254, PIN_INPUT, 2) /* (AA25) PRG0_PRU1_GPO4.PRG0_RGMII2_RX_CTL */
+
+ AM65X_IOPAD(0x01f4, PIN_INPUT, 2) /* (V24) PRG0_PRU0_GPO0.PRG0_RGMII1_RD0 */
+ AM65X_IOPAD(0x01f8, PIN_INPUT, 2) /* (W25) PRG0_PRU0_GPO1.PRG0_RGMII1_RD1 */
+ AM65X_IOPAD(0x01fc, PIN_INPUT, 2) /* (W24) PRG0_PRU0_GPO2.PRG0_RGMII1_RD2 */
+ AM65X_IOPAD(0x0200, PIN_INPUT, 2) /* (AA27) PRG0_PRU0_GPO3.PRG0_RGMII1_RD3 */
+ AM65X_IOPAD(0x0224, PIN_OUTPUT, 2) /* (AD27) PRG0_PRU0_GPO12.PRG0_RGMII1_TD0 */
+ AM65X_IOPAD(0x0228, PIN_OUTPUT, 2) /* (AC26) PRG0_PRU0_GPO13.PRG0_RGMII1_TD1 */
+ AM65X_IOPAD(0x022c, PIN_OUTPUT, 2) /* (AD26) PRG0_PRU0_GPO14.PRG0_RGMII1_TD2 */
+ AM65X_IOPAD(0x0230, PIN_OUTPUT, 2) /* (AA24) PRG0_PRU0_GPO15.PRG0_RGMII1_TD3 */
+ AM65X_IOPAD(0x0234, PIN_INPUT, 2) /* (AD28) PRG0_PRU0_GPO16.PRG0_RGMII1_TXC */
+ AM65X_IOPAD(0x0220, PIN_OUTPUT, 2) /* (AB25) PRG0_PRU0_GPO11.PRG0_RGMII1_TX_CTL */
+ AM65X_IOPAD(0x020c, PIN_INPUT, 2) /* (Y25) PRG0_PRU0_GPO6.PRG0_RGMII1_RXC */
+ AM65X_IOPAD(0x0204, PIN_INPUT, 2) /* (Y24) PRG0_PRU0_GPO4.PRG0_RGMII1_RX_CTL */
+ >;
+ };
+
+ icssg0_iep0_pins_default: icssg0-iep0-default-pins {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x0240, PIN_INPUT, 2) /* (U24) PRG0_PRU0_GPO19.PRG0_IEP0_EDC_SYNC_OUT0 */
+ >;
+ };
+
+ icssg1_mdio_pins_default: icssg1-mdio-default-pins {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x0180, PIN_INPUT, 0) /* (AD18) PRG1_MDIO0_MDIO */
+ AM65X_IOPAD(0x0184, PIN_OUTPUT, 0) /* (AH18) PRG1_MDIO0_MDC */
+ >;
+ };
+
+ icssg1_rgmii_pins_default: icssg1-rgmii-default-pins {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x0130, PIN_INPUT, 2) /* (AH24) PRG1_PRU1_GPO0.PRG1_RGMII2_RD0 */
+ AM65X_IOPAD(0x0134, PIN_INPUT, 2) /* (AH23) PRG1_PRU1_GPO1.PRG1_RGMII2_RD1 */
+ AM65X_IOPAD(0x0138, PIN_INPUT, 2) /* (AG21) PRG1_PRU1_GPO2.PRG1_RGMII2_RD2 */
+ AM65X_IOPAD(0x013c, PIN_INPUT, 2) /* (AH22) PRG1_PRU1_GPO3.PRG1_RGMII2_RD3 */
+ AM65X_IOPAD(0x0160, PIN_OUTPUT, 2) /* (AE20) PRG1_PRU1_GPO12.PRG1_RGMII2_TD0 */
+ AM65X_IOPAD(0x0164, PIN_OUTPUT, 2) /* (AF19) PRG1_PRU1_GPO13.PRG1_RGMII2_TD1 */
+ AM65X_IOPAD(0x0168, PIN_OUTPUT, 2) /* (AH19) PRG1_PRU1_GPO14.PRG1_RGMII2_TD2 */
+ AM65X_IOPAD(0x016c, PIN_OUTPUT, 2) /* (AG19) PRG1_PRU1_GPO15.PRG1_RGMII2_TD3 */
+ AM65X_IOPAD(0x0170, PIN_INPUT, 2) /* (AE19) PRG1_PRU1_GPO16.PRG1_RGMII2_TXC */
+ AM65X_IOPAD(0x015c, PIN_OUTPUT, 2) /* (AC20) PRG1_PRU1_GPO11.PRG1_RGMII2_TX_CTL */
+ AM65X_IOPAD(0x0148, PIN_INPUT, 2) /* (AG22) PRG1_PRU1_GPO6.PRG1_RGMII2_RXC */
+ AM65X_IOPAD(0x0140, PIN_INPUT, 2) /* (AE21) PRG1_PRU1_GPO4.PRG1_RGMII2_RX_CTL */
+
+ AM65X_IOPAD(0x00e0, PIN_INPUT, 2) /* (AE22) PRG1_PRU0_GPO0.PRG1_RGMII1_RD0 */
+ AM65X_IOPAD(0x00e4, PIN_INPUT, 2) /* (AG24) PRG1_PRU0_GPO1.PRG1_RGMII1_RD1 */
+ AM65X_IOPAD(0x00e8, PIN_INPUT, 2) /* (AF23) PRG1_PRU0_GPO2.PRG1_RGMII1_RD2 */
+ AM65X_IOPAD(0x00ec, PIN_INPUT, 2) /* (AD21) PRG1_PRU0_GPO3.PRG1_RGMII1_RD3 */
+ AM65X_IOPAD(0x0110, PIN_OUTPUT, 2) /* (AH20) PRG1_PRU0_GPO12.PRG1_RGMII1_TD0 */
+ AM65X_IOPAD(0x0114, PIN_OUTPUT, 2) /* (AH21) PRG1_PRU0_GPO13.PRG1_RGMII1_TD1 */
+ AM65X_IOPAD(0x0118, PIN_OUTPUT, 2) /* (AG20) PRG1_PRU0_GPO14.PRG1_RGMII1_TD2 */
+ AM65X_IOPAD(0x011c, PIN_OUTPUT, 2) /* (AD19) PRG1_PRU0_GPO15.PRG1_RGMII1_TD3 */
+ AM65X_IOPAD(0x0120, PIN_INPUT, 2) /* (AD20) PRG1_PRU0_GPO16.PRG1_RGMII1_TXC */
+ AM65X_IOPAD(0x010c, PIN_OUTPUT, 2) /* (AF21) PRG1_PRU0_GPO11.PRG1_RGMII1_TX_CTL */
+ AM65X_IOPAD(0x00f8, PIN_INPUT, 2) /* (AF22) PRG1_PRU0_GPO6.PRG1_RGMII1_RXC */
+ AM65X_IOPAD(0x00f0, PIN_INPUT, 2) /* (AG23) PRG1_PRU0_GPO4.PRG1_RGMII1_RX_CTL */
+ >;
+ };
+
+ icssg1_iep0_pins_default: icssg1-iep0-default-pins {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x012c, PIN_INPUT, 2) /* (AG26) PRG1_PRU0_GPO19.PRG1_IEP0_EDC_SYNC_OUT0 */
+ >;
+ };
+};
+
+&icssg0_mdio {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg0_mdio_pins_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ icssg0_phy0: ethernet-phy@0 {
+ reg = <0>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ };
+
+ icssg0_phy1: ethernet-phy@3 {
+ reg = <3>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ };
+};
+
+&icssg0_iep0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg0_iep0_pins_default>;
+};
+
+&icssg1_mdio {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg1_mdio_pins_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ icssg1_phy0: ethernet-phy@0 {
+ reg = <0>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ };
+
+ icssg1_phy1: ethernet-phy@3 {
+ reg = <3>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ };
+};
+
+&icssg1_iep0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg1_iep0_pins_default>;
+};
--
2.34.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v4 3/4] arm64: dts: ti: k3-am654-idk: Add ICSSG Ethernet ports
@ 2023-10-03 10:55 ` MD Danish Anwar
0 siblings, 0 replies; 16+ messages in thread
From: MD Danish Anwar @ 2023-10-03 10:55 UTC (permalink / raw)
To: Vignesh Raghavendra, Nishanth Menon
Cc: Peng Fan, Udit Kumar, Nícolas F. R. A. Prado,
Neil Armstrong, Arnd Bergmann, Konrad Dybcio, Geert Uytterhoeven,
Bjorn Andersson, Will Deacon, Catalin Marinas, Conor Dooley,
Krzysztof Kozlowski, Rob Herring, Andrew Lunn, linux-kernel,
devicetree, linux-arm-kernel, Tero Kristo, linux-omap, srk,
r-gunasekaran, MD Danish Anwar
The IDK application board has 4 Gigabit Ethernet ports.
This patch adds support for the 4 Gigabit Ethernet ports
which are provided by ICSSG0 and ICSSG1.
The IEP0 SYNC_OUT0 pins are used for PPS out on the IDK card.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
---
arch/arm64/boot/dts/ti/Makefile | 2 +
arch/arm64/boot/dts/ti/k3-am654-idk.dtso | 296 +++++++++++++++++++++++
2 files changed, 298 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-am654-idk.dtso
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 8f5c9515777e..7f2d6099b2f4 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -44,6 +44,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl-wlan.dtb
# Boards with AM65x SoC
k3-am654-base-board-dtbs := k3-am654-common-board.dtb k3-am654-icssg2.dtbo
k3-am654-gp-evm-dtbs := k3-am654-base-board.dtb k3-am654-base-board-rocktech-rk101-panel.dtbo
+k3-am654-idk-dtbs := k3-am654-base-board.dtb k3-am654-idk.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic-pg2.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb
@@ -52,6 +53,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am654-common-board.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am654-gp-evm.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am654-idk.dtb
# Boards with J7200 SoC
k3-j7200-evm-dtbs := k3-j7200-common-proc-board.dtb k3-j7200-evm-quad-port-eth-exp.dtbo
diff --git a/arch/arm64/boot/dts/ti/k3-am654-idk.dtso b/arch/arm64/boot/dts/ti/k3-am654-idk.dtso
new file mode 100644
index 000000000000..150428dfce6f
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am654-idk.dtso
@@ -0,0 +1,296 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * DT overlay for IDK application board on AM654 EVM
+ *
+ * Copyright (C) 2018-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include "k3-pinctrl.h"
+
+&{/} {
+ aliases {
+ ethernet3 = "/icssg0-eth/ethernet-ports/port@0";
+ ethernet4 = "/icssg0-eth/ethernet-ports/port@1";
+ ethernet5 = "/icssg1-eth/ethernet-ports/port@0";
+ ethernet6 = "/icssg1-eth/ethernet-ports/port@1";
+ };
+
+ /* Ethernet node on PRU-ICSSG0 */
+ icssg0_eth: icssg0-eth {
+ compatible = "ti,am654-icssg-prueth";
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg0_rgmii_pins_default>;
+ sram = <&msmc_ram>;
+ ti,prus = <&pru0_0>, <&rtu0_0>, <&tx_pru0_0>, <&pru0_1>, <&rtu0_1>, <&tx_pru0_1>;
+ firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-rtu0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-txpru0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-pru1-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-rtu1-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-txpru1-prueth-fw.elf";
+
+ ti,pruss-gp-mux-sel = <2>, /* MII mode */
+ <2>,
+ <2>,
+ <2>, /* MII mode */
+ <2>,
+ <2>;
+
+ ti,mii-g-rt = <&icssg0_mii_g_rt>;
+ ti,mii-rt = <&icssg0_mii_rt>;
+ ti,iep = <&icssg0_iep0>, <&icssg0_iep1>;
+
+ interrupt-parent = <&icssg0_intc>;
+ interrupts = <24 0 2>, <25 1 3>;
+ interrupt-names = "tx_ts0", "tx_ts1";
+
+ dmas = <&main_udmap 0xc100>, /* egress slice 0 */
+ <&main_udmap 0xc101>, /* egress slice 0 */
+ <&main_udmap 0xc102>, /* egress slice 0 */
+ <&main_udmap 0xc103>, /* egress slice 0 */
+ <&main_udmap 0xc104>, /* egress slice 1 */
+ <&main_udmap 0xc105>, /* egress slice 1 */
+ <&main_udmap 0xc106>, /* egress slice 1 */
+ <&main_udmap 0xc107>, /* egress slice 1 */
+
+ <&main_udmap 0x4100>, /* ingress slice 0 */
+ <&main_udmap 0x4101>, /* ingress slice 1 */
+ <&main_udmap 0x4102>, /* mgmnt rsp slice 0 */
+ <&main_udmap 0x4103>; /* mgmnt rsp slice 1 */
+ dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
+ "tx1-0", "tx1-1", "tx1-2", "tx1-3",
+ "rx0", "rx1";
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ icssg0_emac0: port@0 {
+ reg = <0>;
+ phy-handle = <&icssg0_phy0>;
+ phy-mode = "rgmii-id";
+ ti,syscon-rgmii-delay = <&scm_conf 0x4100>;
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ icssg0_emac1: port@1 {
+ reg = <1>;
+ phy-handle = <&icssg0_phy1>;
+ phy-mode = "rgmii-id";
+ ti,syscon-rgmii-delay = <&scm_conf 0x4104>;
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ };
+ };
+
+ /* Ethernet node on PRU-ICSSG1 */
+ icssg1_eth: icssg1-eth {
+ compatible = "ti,am654-icssg-prueth";
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg1_rgmii_pins_default>;
+ sram = <&msmc_ram>;
+ ti,prus = <&pru1_0>, <&rtu1_0>, <&tx_pru1_0>, <&pru1_1>, <&rtu1_1>, <&tx_pru1_1>;
+ firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-rtu0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-txpru0-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-pru1-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-rtu1-prueth-fw.elf",
+ "ti-pruss/am65x-sr2-txpru1-prueth-fw.elf";
+
+ ti,pruss-gp-mux-sel = <2>, /* MII mode */
+ <2>,
+ <2>,
+ <2>, /* MII mode */
+ <2>,
+ <2>;
+
+ ti,mii-g-rt = <&icssg1_mii_g_rt>;
+ ti,mii-rt = <&icssg1_mii_rt>;
+ ti,iep = <&icssg1_iep0>, <&icssg1_iep1>;
+
+ interrupt-parent = <&icssg1_intc>;
+ interrupts = <24 0 2>, <25 1 3>;
+ interrupt-names = "tx_ts0", "tx_ts1";
+
+ dmas = <&main_udmap 0xc200>, /* egress slice 0 */
+ <&main_udmap 0xc201>, /* egress slice 0 */
+ <&main_udmap 0xc202>, /* egress slice 0 */
+ <&main_udmap 0xc203>, /* egress slice 0 */
+ <&main_udmap 0xc204>, /* egress slice 1 */
+ <&main_udmap 0xc205>, /* egress slice 1 */
+ <&main_udmap 0xc206>, /* egress slice 1 */
+ <&main_udmap 0xc207>, /* egress slice 1 */
+
+ <&main_udmap 0x4200>, /* ingress slice 0 */
+ <&main_udmap 0x4201>, /* ingress slice 1 */
+ <&main_udmap 0x4202>, /* mgmnt rsp slice 0 */
+ <&main_udmap 0x4203>; /* mgmnt rsp slice 1 */
+ dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
+ "tx1-0", "tx1-1", "tx1-2", "tx1-3",
+ "rx0", "rx1";
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ icssg1_emac0: port@0 {
+ reg = <0>;
+ phy-handle = <&icssg1_phy0>;
+ phy-mode = "rgmii-id";
+ ti,syscon-rgmii-delay = <&scm_conf 0x4110>;
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ icssg1_emac1: port@1 {
+ reg = <1>;
+ phy-handle = <&icssg1_phy1>;
+ phy-mode = "rgmii-id";
+ ti,syscon-rgmii-delay = <&scm_conf 0x4114>;
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ };
+ };
+};
+
+&main_pmx0 {
+
+ icssg0_mdio_pins_default: icssg0-mdio-default-pins {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x0294, PIN_INPUT, 0) /* (AE26) PRG0_MDIO0_MDIO */
+ AM65X_IOPAD(0x0298, PIN_OUTPUT, 0) /* (AE28) PRG0_MDIO0_MDC */
+ >;
+ };
+
+ icssg0_rgmii_pins_default: icssg0-rgmii-default-pins {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x0244, PIN_INPUT, 2) /* (AB28) PRG0_PRU1_GPO0.PRG0_RGMII2_RD0 */
+ AM65X_IOPAD(0x0248, PIN_INPUT, 2) /* (AC28) PRG0_PRU1_GPO1.PRG0_RGMII2_RD1 */
+ AM65X_IOPAD(0x024c, PIN_INPUT, 2) /* (AC27) PRG0_PRU1_GPO2.PRG0_RGMII2_RD2 */
+ AM65X_IOPAD(0x0250, PIN_INPUT, 2) /* (AB26) PRG0_PRU1_GPO3.PRG0_RGMII2_RD3 */
+ AM65X_IOPAD(0x0274, PIN_OUTPUT, 2) /* (AC25) PRG0_PRU1_GPO12.PRG0_RGMII2_TD0 */
+ AM65X_IOPAD(0x0278, PIN_OUTPUT, 2) /* (AD25) PRG0_PRU1_GPO13.PRG0_RGMII2_TD1 */
+ AM65X_IOPAD(0x027c, PIN_OUTPUT, 2) /* (AD24) PRG0_PRU1_GPO14.PRG0_RGMII2_TD2 */
+ AM65X_IOPAD(0x0280, PIN_OUTPUT, 2) /* (AE27) PRG0_PRU1_GPO15.PRG0_RGMII2_TD3 */
+ AM65X_IOPAD(0x0284, PIN_INPUT, 2) /* (AC24) PRG0_PRU1_GPO16.PRG0_RGMII2_TXC */
+ AM65X_IOPAD(0x0270, PIN_OUTPUT, 2) /* (AB24) PRG0_PRU1_GPO11.PRG0_RGMII2_TX_CTL */
+ AM65X_IOPAD(0x025c, PIN_INPUT, 2) /* (AB27) PRG0_PRU1_GPO6.PRG0_RGMII2_RXC */
+ AM65X_IOPAD(0x0254, PIN_INPUT, 2) /* (AA25) PRG0_PRU1_GPO4.PRG0_RGMII2_RX_CTL */
+
+ AM65X_IOPAD(0x01f4, PIN_INPUT, 2) /* (V24) PRG0_PRU0_GPO0.PRG0_RGMII1_RD0 */
+ AM65X_IOPAD(0x01f8, PIN_INPUT, 2) /* (W25) PRG0_PRU0_GPO1.PRG0_RGMII1_RD1 */
+ AM65X_IOPAD(0x01fc, PIN_INPUT, 2) /* (W24) PRG0_PRU0_GPO2.PRG0_RGMII1_RD2 */
+ AM65X_IOPAD(0x0200, PIN_INPUT, 2) /* (AA27) PRG0_PRU0_GPO3.PRG0_RGMII1_RD3 */
+ AM65X_IOPAD(0x0224, PIN_OUTPUT, 2) /* (AD27) PRG0_PRU0_GPO12.PRG0_RGMII1_TD0 */
+ AM65X_IOPAD(0x0228, PIN_OUTPUT, 2) /* (AC26) PRG0_PRU0_GPO13.PRG0_RGMII1_TD1 */
+ AM65X_IOPAD(0x022c, PIN_OUTPUT, 2) /* (AD26) PRG0_PRU0_GPO14.PRG0_RGMII1_TD2 */
+ AM65X_IOPAD(0x0230, PIN_OUTPUT, 2) /* (AA24) PRG0_PRU0_GPO15.PRG0_RGMII1_TD3 */
+ AM65X_IOPAD(0x0234, PIN_INPUT, 2) /* (AD28) PRG0_PRU0_GPO16.PRG0_RGMII1_TXC */
+ AM65X_IOPAD(0x0220, PIN_OUTPUT, 2) /* (AB25) PRG0_PRU0_GPO11.PRG0_RGMII1_TX_CTL */
+ AM65X_IOPAD(0x020c, PIN_INPUT, 2) /* (Y25) PRG0_PRU0_GPO6.PRG0_RGMII1_RXC */
+ AM65X_IOPAD(0x0204, PIN_INPUT, 2) /* (Y24) PRG0_PRU0_GPO4.PRG0_RGMII1_RX_CTL */
+ >;
+ };
+
+ icssg0_iep0_pins_default: icssg0-iep0-default-pins {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x0240, PIN_INPUT, 2) /* (U24) PRG0_PRU0_GPO19.PRG0_IEP0_EDC_SYNC_OUT0 */
+ >;
+ };
+
+ icssg1_mdio_pins_default: icssg1-mdio-default-pins {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x0180, PIN_INPUT, 0) /* (AD18) PRG1_MDIO0_MDIO */
+ AM65X_IOPAD(0x0184, PIN_OUTPUT, 0) /* (AH18) PRG1_MDIO0_MDC */
+ >;
+ };
+
+ icssg1_rgmii_pins_default: icssg1-rgmii-default-pins {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x0130, PIN_INPUT, 2) /* (AH24) PRG1_PRU1_GPO0.PRG1_RGMII2_RD0 */
+ AM65X_IOPAD(0x0134, PIN_INPUT, 2) /* (AH23) PRG1_PRU1_GPO1.PRG1_RGMII2_RD1 */
+ AM65X_IOPAD(0x0138, PIN_INPUT, 2) /* (AG21) PRG1_PRU1_GPO2.PRG1_RGMII2_RD2 */
+ AM65X_IOPAD(0x013c, PIN_INPUT, 2) /* (AH22) PRG1_PRU1_GPO3.PRG1_RGMII2_RD3 */
+ AM65X_IOPAD(0x0160, PIN_OUTPUT, 2) /* (AE20) PRG1_PRU1_GPO12.PRG1_RGMII2_TD0 */
+ AM65X_IOPAD(0x0164, PIN_OUTPUT, 2) /* (AF19) PRG1_PRU1_GPO13.PRG1_RGMII2_TD1 */
+ AM65X_IOPAD(0x0168, PIN_OUTPUT, 2) /* (AH19) PRG1_PRU1_GPO14.PRG1_RGMII2_TD2 */
+ AM65X_IOPAD(0x016c, PIN_OUTPUT, 2) /* (AG19) PRG1_PRU1_GPO15.PRG1_RGMII2_TD3 */
+ AM65X_IOPAD(0x0170, PIN_INPUT, 2) /* (AE19) PRG1_PRU1_GPO16.PRG1_RGMII2_TXC */
+ AM65X_IOPAD(0x015c, PIN_OUTPUT, 2) /* (AC20) PRG1_PRU1_GPO11.PRG1_RGMII2_TX_CTL */
+ AM65X_IOPAD(0x0148, PIN_INPUT, 2) /* (AG22) PRG1_PRU1_GPO6.PRG1_RGMII2_RXC */
+ AM65X_IOPAD(0x0140, PIN_INPUT, 2) /* (AE21) PRG1_PRU1_GPO4.PRG1_RGMII2_RX_CTL */
+
+ AM65X_IOPAD(0x00e0, PIN_INPUT, 2) /* (AE22) PRG1_PRU0_GPO0.PRG1_RGMII1_RD0 */
+ AM65X_IOPAD(0x00e4, PIN_INPUT, 2) /* (AG24) PRG1_PRU0_GPO1.PRG1_RGMII1_RD1 */
+ AM65X_IOPAD(0x00e8, PIN_INPUT, 2) /* (AF23) PRG1_PRU0_GPO2.PRG1_RGMII1_RD2 */
+ AM65X_IOPAD(0x00ec, PIN_INPUT, 2) /* (AD21) PRG1_PRU0_GPO3.PRG1_RGMII1_RD3 */
+ AM65X_IOPAD(0x0110, PIN_OUTPUT, 2) /* (AH20) PRG1_PRU0_GPO12.PRG1_RGMII1_TD0 */
+ AM65X_IOPAD(0x0114, PIN_OUTPUT, 2) /* (AH21) PRG1_PRU0_GPO13.PRG1_RGMII1_TD1 */
+ AM65X_IOPAD(0x0118, PIN_OUTPUT, 2) /* (AG20) PRG1_PRU0_GPO14.PRG1_RGMII1_TD2 */
+ AM65X_IOPAD(0x011c, PIN_OUTPUT, 2) /* (AD19) PRG1_PRU0_GPO15.PRG1_RGMII1_TD3 */
+ AM65X_IOPAD(0x0120, PIN_INPUT, 2) /* (AD20) PRG1_PRU0_GPO16.PRG1_RGMII1_TXC */
+ AM65X_IOPAD(0x010c, PIN_OUTPUT, 2) /* (AF21) PRG1_PRU0_GPO11.PRG1_RGMII1_TX_CTL */
+ AM65X_IOPAD(0x00f8, PIN_INPUT, 2) /* (AF22) PRG1_PRU0_GPO6.PRG1_RGMII1_RXC */
+ AM65X_IOPAD(0x00f0, PIN_INPUT, 2) /* (AG23) PRG1_PRU0_GPO4.PRG1_RGMII1_RX_CTL */
+ >;
+ };
+
+ icssg1_iep0_pins_default: icssg1-iep0-default-pins {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x012c, PIN_INPUT, 2) /* (AG26) PRG1_PRU0_GPO19.PRG1_IEP0_EDC_SYNC_OUT0 */
+ >;
+ };
+};
+
+&icssg0_mdio {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg0_mdio_pins_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ icssg0_phy0: ethernet-phy@0 {
+ reg = <0>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ };
+
+ icssg0_phy1: ethernet-phy@3 {
+ reg = <3>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ };
+};
+
+&icssg0_iep0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg0_iep0_pins_default>;
+};
+
+&icssg1_mdio {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg1_mdio_pins_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ icssg1_phy0: ethernet-phy@0 {
+ reg = <0>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ };
+
+ icssg1_phy1: ethernet-phy@3 {
+ reg = <3>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ };
+};
+
+&icssg1_iep0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg1_iep0_pins_default>;
+};
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v4 4/4] arm64: defconfig: Enable TI_ICSSG_PRUETH
2023-10-03 10:55 ` MD Danish Anwar
@ 2023-10-03 10:55 ` MD Danish Anwar
-1 siblings, 0 replies; 16+ messages in thread
From: MD Danish Anwar @ 2023-10-03 10:55 UTC (permalink / raw)
To: Vignesh Raghavendra, Nishanth Menon
Cc: Peng Fan, Udit Kumar, Nícolas F. R. A. Prado,
Neil Armstrong, Arnd Bergmann, Konrad Dybcio, Geert Uytterhoeven,
Bjorn Andersson, Will Deacon, Catalin Marinas, Conor Dooley,
Krzysztof Kozlowski, Rob Herring, Andrew Lunn, linux-kernel,
devicetree, linux-arm-kernel, Tero Kristo, linux-omap, srk,
r-gunasekaran, MD Danish Anwar
The Programmable Real-time Unit and Industrial Communication Subsystem
Gigabit (PRU_ICSSG) is a low-latency microcontroller subsystem in the TI
K3 SoCs such as AM654x, AM64x. This subsystem is provided for the use
cases like implementation of custom peripheral interfaces, offloading of
tasks from the other processor cores of the SoC, etc.
Currently AM654x-EVM uses ICSSG driver.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
---
arch/arm64/configs/defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 66bfbef73324..b7cbc7b38d63 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -368,6 +368,7 @@ CONFIG_SNI_NETSEC=y
CONFIG_STMMAC_ETH=m
CONFIG_DWMAC_TEGRA=m
CONFIG_TI_K3_AM65_CPSW_NUSS=y
+CONFIG_TI_ICSSG_PRUETH=m
CONFIG_QCOM_IPA=m
CONFIG_MESON_GXL_PHY=m
CONFIG_AQUANTIA_PHY=y
--
2.34.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v4 4/4] arm64: defconfig: Enable TI_ICSSG_PRUETH
@ 2023-10-03 10:55 ` MD Danish Anwar
0 siblings, 0 replies; 16+ messages in thread
From: MD Danish Anwar @ 2023-10-03 10:55 UTC (permalink / raw)
To: Vignesh Raghavendra, Nishanth Menon
Cc: Peng Fan, Udit Kumar, Nícolas F. R. A. Prado,
Neil Armstrong, Arnd Bergmann, Konrad Dybcio, Geert Uytterhoeven,
Bjorn Andersson, Will Deacon, Catalin Marinas, Conor Dooley,
Krzysztof Kozlowski, Rob Herring, Andrew Lunn, linux-kernel,
devicetree, linux-arm-kernel, Tero Kristo, linux-omap, srk,
r-gunasekaran, MD Danish Anwar
The Programmable Real-time Unit and Industrial Communication Subsystem
Gigabit (PRU_ICSSG) is a low-latency microcontroller subsystem in the TI
K3 SoCs such as AM654x, AM64x. This subsystem is provided for the use
cases like implementation of custom peripheral interfaces, offloading of
tasks from the other processor cores of the SoC, etc.
Currently AM654x-EVM uses ICSSG driver.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
---
arch/arm64/configs/defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 66bfbef73324..b7cbc7b38d63 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -368,6 +368,7 @@ CONFIG_SNI_NETSEC=y
CONFIG_STMMAC_ETH=m
CONFIG_DWMAC_TEGRA=m
CONFIG_TI_K3_AM65_CPSW_NUSS=y
+CONFIG_TI_ICSSG_PRUETH=m
CONFIG_QCOM_IPA=m
CONFIG_MESON_GXL_PHY=m
CONFIG_AQUANTIA_PHY=y
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: [PATCH v4 0/4] Add AM65x ICSSG Ethernet support
2023-10-03 10:55 ` MD Danish Anwar
@ 2023-10-12 9:18 ` Vignesh Raghavendra
-1 siblings, 0 replies; 16+ messages in thread
From: Vignesh Raghavendra @ 2023-10-12 9:18 UTC (permalink / raw)
To: MD Danish Anwar, Nishanth Menon
Cc: Peng Fan, Udit Kumar, Nícolas F. R. A. Prado,
Neil Armstrong, Arnd Bergmann, Konrad Dybcio, Geert Uytterhoeven,
Bjorn Andersson, Will Deacon, Catalin Marinas, Conor Dooley,
Krzysztof Kozlowski, Rob Herring, Andrew Lunn, linux-kernel,
devicetree, linux-arm-kernel, Tero Kristo, linux-omap, srk,
r-gunasekaran
On 03/10/23 16:25, MD Danish Anwar wrote:
> Hi All,
>
> This series adds support for ICSSG ethernet on AM65x SR2.0.
> This series also enables TI_ICSSG_PRUETH as loadable kernel module.
> This series is based on the latest next-20230925 linux-next.
>
> This is the v4 of the series [v1]. This addresses comments made on v3.
>
> Changes from v3 to v4:
> *) Added RB tag of Andrew Davis.
> *) Added LAKML to the --cc of this series as it was dropped in v3.
>
> Changes from v2 to v3:
> *) Changed comment of icssg nodes in device trees from "Dual Ethernet
> application node" to "Ethernet node" as asked by Andrew L.
> *) Applied k3-am654-idk.dtbo at build time to the k3-am654-base-board.dtb
> in order to not have orphan DTBO as asked by Andrew D.
> *) Modified k3-am654-gp-evm.dtb to have k3-am654-icssg2.dtbo as well.
>
> Changes from v1 to v2:
> *) Moved ICSSG2 nodes from k3-am654-base-board.dts to new overlay file
> k3-am654-icssg2.dtso as asked by Andrew.
> *) Renamed k3-am654-base-board.dts to k3-am654-common-board.dts
> *) Added "Enable TI_ICSSG_PRUETH" patch to this series.
>
> [v1] https://lore.kernel.org/all/20230911071245.2173520-1-danishanwar@ti.com/
> [v2] https://lore.kernel.org/all/20230921060913.721336-1-danishanwar@ti.com/
> [v3] https://lore.kernel.org/all/20230926045337.1248276-1-danishanwar@ti.com/
>
Wit this series applied I see build failures like:
arch/arm64/boot/dts/ti/k3-am65-main.dtsi:897.25-916.4: Warning (unique_unit_address): /bus@100000/pcie@5600000: duplicate unit-address (also used in node /bus@100000/pcie-ep@5600000)
DTC arch/arm64/boot/dts/ti/k3-am654-icssg2.dtbo
arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso:14.6-85.3: Warning (node_name_chars_strict): /fragment@0/__overlay__: Character '_' not recommended in node name
arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso:87.12-125.3: Warning (node_name_chars_strict): /fragment@1/__overlay__: Character '_' not recommended in node name
arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso:127.14-145.3: Warning (node_name_chars_strict): /fragment@2/__overlay__: Character '_' not recommended in node name
DTOVL arch/arm64/boot/dts/ti/k3-am654-base-board.dtb
Overlay 'arch/arm64/boot/dts/ti/k3-am654.dtsi' is incomplete (4096 / 1346656301 bytes read)
make[3]: *** [scripts/Makefile.lib:402: arch/arm64/boot/dts/ti/k3-am654-base-board.dtb] Error 1
make[2]: *** [scripts/Makefile.build:480: arch/arm64/boot/dts/ti] Error 2
make[1]: *** [/home/a0132425/workspace/k3-next/Makefile:1391: dtbs] Error 2
make: *** [Makefile:234: __sub-make] Error 2
There probably is some race here as I see this with make -j32 dtbs
but not on my less powerful laptop
> Thanks and Regards,
> MD Danish Anwar
>
> MD Danish Anwar (4):
> arm64: dts: ti: k3-am65-main: Add ICSSG IEP nodes
> arm64: dts: ti: k3-am654-base-board: add ICSSG2 Ethernet support
> arm64: dts: ti: k3-am654-idk: Add ICSSG Ethernet ports
> arm64: defconfig: Enable TI_ICSSG_PRUETH
>
> arch/arm64/boot/dts/ti/Makefile | 4 +
> arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 36 +++
> ...se-board.dts => k3-am654-common-board.dts} | 0
> arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso | 145 +++++++++
> arch/arm64/boot/dts/ti/k3-am654-idk.dtso | 296 ++++++++++++++++++
> arch/arm64/configs/defconfig | 1 +
> 6 files changed, 482 insertions(+)
> rename arch/arm64/boot/dts/ti/{k3-am654-base-board.dts => k3-am654-common-board.dts} (100%)
> create mode 100644 arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso
> create mode 100644 arch/arm64/boot/dts/ti/k3-am654-idk.dtso
>
--
Regards
Vignesh
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH v4 0/4] Add AM65x ICSSG Ethernet support
@ 2023-10-12 9:18 ` Vignesh Raghavendra
0 siblings, 0 replies; 16+ messages in thread
From: Vignesh Raghavendra @ 2023-10-12 9:18 UTC (permalink / raw)
To: MD Danish Anwar, Nishanth Menon
Cc: Peng Fan, Udit Kumar, Nícolas F. R. A. Prado,
Neil Armstrong, Arnd Bergmann, Konrad Dybcio, Geert Uytterhoeven,
Bjorn Andersson, Will Deacon, Catalin Marinas, Conor Dooley,
Krzysztof Kozlowski, Rob Herring, Andrew Lunn, linux-kernel,
devicetree, linux-arm-kernel, Tero Kristo, linux-omap, srk,
r-gunasekaran
On 03/10/23 16:25, MD Danish Anwar wrote:
> Hi All,
>
> This series adds support for ICSSG ethernet on AM65x SR2.0.
> This series also enables TI_ICSSG_PRUETH as loadable kernel module.
> This series is based on the latest next-20230925 linux-next.
>
> This is the v4 of the series [v1]. This addresses comments made on v3.
>
> Changes from v3 to v4:
> *) Added RB tag of Andrew Davis.
> *) Added LAKML to the --cc of this series as it was dropped in v3.
>
> Changes from v2 to v3:
> *) Changed comment of icssg nodes in device trees from "Dual Ethernet
> application node" to "Ethernet node" as asked by Andrew L.
> *) Applied k3-am654-idk.dtbo at build time to the k3-am654-base-board.dtb
> in order to not have orphan DTBO as asked by Andrew D.
> *) Modified k3-am654-gp-evm.dtb to have k3-am654-icssg2.dtbo as well.
>
> Changes from v1 to v2:
> *) Moved ICSSG2 nodes from k3-am654-base-board.dts to new overlay file
> k3-am654-icssg2.dtso as asked by Andrew.
> *) Renamed k3-am654-base-board.dts to k3-am654-common-board.dts
> *) Added "Enable TI_ICSSG_PRUETH" patch to this series.
>
> [v1] https://lore.kernel.org/all/20230911071245.2173520-1-danishanwar@ti.com/
> [v2] https://lore.kernel.org/all/20230921060913.721336-1-danishanwar@ti.com/
> [v3] https://lore.kernel.org/all/20230926045337.1248276-1-danishanwar@ti.com/
>
Wit this series applied I see build failures like:
arch/arm64/boot/dts/ti/k3-am65-main.dtsi:897.25-916.4: Warning (unique_unit_address): /bus@100000/pcie@5600000: duplicate unit-address (also used in node /bus@100000/pcie-ep@5600000)
DTC arch/arm64/boot/dts/ti/k3-am654-icssg2.dtbo
arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso:14.6-85.3: Warning (node_name_chars_strict): /fragment@0/__overlay__: Character '_' not recommended in node name
arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso:87.12-125.3: Warning (node_name_chars_strict): /fragment@1/__overlay__: Character '_' not recommended in node name
arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso:127.14-145.3: Warning (node_name_chars_strict): /fragment@2/__overlay__: Character '_' not recommended in node name
DTOVL arch/arm64/boot/dts/ti/k3-am654-base-board.dtb
Overlay 'arch/arm64/boot/dts/ti/k3-am654.dtsi' is incomplete (4096 / 1346656301 bytes read)
make[3]: *** [scripts/Makefile.lib:402: arch/arm64/boot/dts/ti/k3-am654-base-board.dtb] Error 1
make[2]: *** [scripts/Makefile.build:480: arch/arm64/boot/dts/ti] Error 2
make[1]: *** [/home/a0132425/workspace/k3-next/Makefile:1391: dtbs] Error 2
make: *** [Makefile:234: __sub-make] Error 2
There probably is some race here as I see this with make -j32 dtbs
but not on my less powerful laptop
> Thanks and Regards,
> MD Danish Anwar
>
> MD Danish Anwar (4):
> arm64: dts: ti: k3-am65-main: Add ICSSG IEP nodes
> arm64: dts: ti: k3-am654-base-board: add ICSSG2 Ethernet support
> arm64: dts: ti: k3-am654-idk: Add ICSSG Ethernet ports
> arm64: defconfig: Enable TI_ICSSG_PRUETH
>
> arch/arm64/boot/dts/ti/Makefile | 4 +
> arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 36 +++
> ...se-board.dts => k3-am654-common-board.dts} | 0
> arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso | 145 +++++++++
> arch/arm64/boot/dts/ti/k3-am654-idk.dtso | 296 ++++++++++++++++++
> arch/arm64/configs/defconfig | 1 +
> 6 files changed, 482 insertions(+)
> rename arch/arm64/boot/dts/ti/{k3-am654-base-board.dts => k3-am654-common-board.dts} (100%)
> create mode 100644 arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso
> create mode 100644 arch/arm64/boot/dts/ti/k3-am654-idk.dtso
>
--
Regards
Vignesh
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH v4 2/4] arm64: dts: ti: k3-am654-base-board: add ICSSG2 Ethernet support
2023-10-03 10:55 ` MD Danish Anwar
@ 2023-10-12 9:21 ` Vignesh Raghavendra
-1 siblings, 0 replies; 16+ messages in thread
From: Vignesh Raghavendra @ 2023-10-12 9:21 UTC (permalink / raw)
To: MD Danish Anwar, Nishanth Menon
Cc: Peng Fan, Udit Kumar, Nícolas F. R. A. Prado,
Neil Armstrong, Arnd Bergmann, Konrad Dybcio, Geert Uytterhoeven,
Bjorn Andersson, Will Deacon, Catalin Marinas, Conor Dooley,
Krzysztof Kozlowski, Rob Herring, Andrew Lunn, linux-kernel,
devicetree, linux-arm-kernel, Tero Kristo, linux-omap, srk,
r-gunasekaran, Andrew Davis
On 03/10/23 16:25, MD Danish Anwar wrote:
> ICSSG2 provides dual Gigabit Ethernet support.
>
> For support SR2.0 ICSSG Ethernet firmware:
Are you describing difference wrt SR1.0? Because there is no SR1.0 in
mainline today. So this doesnt make sense
> - provide different firmware blobs and use TX_PRU.
> - IEP0 is used as PTP Hardware Clock and can only be used for one port.
> - TX timestamp notification comes via INTC interrupt.
>
You are also renaming existing dts file which needs to be called out
clearly in the commit message something like:
Rename the existing k3-am654-base-board.dts to k3-am654-common-board.dts
This represents basic board where ICSSG/PRUs can be used for general
purpose. k3-am654-base-board.dtb is now made of common-board + ICSSG2
specific overlay which enables ICSSG2 dual Ethernet ports available on
base board.
> Reviewed-by: Andrew Davis <afd@ti.com>
> Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
> ---
> arch/arm64/boot/dts/ti/Makefile | 2 +
> ...se-board.dts => k3-am654-common-board.dts} | 0
> arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso | 145 ++++++++++++++++++
> 3 files changed, 147 insertions(+)
> rename arch/arm64/boot/dts/ti/{k3-am654-base-board.dts => k3-am654-common-board.dts} (100%)
> create mode 100644 arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso
>
> diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
> index e7b8e2e7f083..8f5c9515777e 100644
> --- a/arch/arm64/boot/dts/ti/Makefile
> +++ b/arch/arm64/boot/dts/ti/Makefile
> @@ -42,12 +42,14 @@ dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl-sdcard.dtb
> dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl-wlan.dtb
>
> # Boards with AM65x SoC
> +k3-am654-base-board-dtbs := k3-am654-common-board.dtb k3-am654-icssg2.dtbo
> k3-am654-gp-evm-dtbs := k3-am654-base-board.dtb k3-am654-base-board-rocktech-rk101-panel.dtbo
> dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic.dtb
> dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic-pg2.dtb
> dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb
> dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-m2.dtb
> dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb
> +dtb-$(CONFIG_ARCH_K3) += k3-am654-common-board.dtb
> dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb
> dtb-$(CONFIG_ARCH_K3) += k3-am654-gp-evm.dtb
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-common-board.dts
> similarity index 100%
> rename from arch/arm64/boot/dts/ti/k3-am654-base-board.dts
> rename to arch/arm64/boot/dts/ti/k3-am654-common-board.dts
> diff --git a/arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso b/arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso
> new file mode 100644
> index 000000000000..7b7d32282668
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso
> @@ -0,0 +1,145 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/**
> + * DT overlay for IDK application board on AM654 EVM
> + *
> + * Copyright (C) 2018-2023 Texas Instruments Incorporated - https://www.ti.com/
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/net/ti-dp83867.h>
> +#include "k3-pinctrl.h"
> +
> +&{/} {
> + aliases {
> + ethernet1 = &icssg2_emac0;
> + ethernet2 = &icssg2_emac1;
> + };
> +
> + /* Ethernet node on PRU-ICSSG2 */
> + icssg2_eth: icssg2-eth {
> + compatible = "ti,am654-icssg-prueth";
> + pinctrl-names = "default";
> + pinctrl-0 = <&icssg2_rgmii_pins_default>;
> + sram = <&msmc_ram>;
> + ti,prus = <&pru2_0>, <&rtu2_0>, <&tx_pru2_0>,
> + <&pru2_1>, <&rtu2_1>, <&tx_pru2_1>;
> + firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf",
> + "ti-pruss/am65x-sr2-rtu0-prueth-fw.elf",
> + "ti-pruss/am65x-sr2-txpru0-prueth-fw.elf",
> + "ti-pruss/am65x-sr2-pru1-prueth-fw.elf",
> + "ti-pruss/am65x-sr2-rtu1-prueth-fw.elf",
> + "ti-pruss/am65x-sr2-txpru1-prueth-fw.elf";
> +
> + ti,pruss-gp-mux-sel = <2>, /* MII mode */
> + <2>,
> + <2>,
> + <2>, /* MII mode */
> + <2>,
> + <2>;
> +
> + ti,mii-g-rt = <&icssg2_mii_g_rt>;
> + ti,mii-rt = <&icssg2_mii_rt>;
> + ti,iep = <&icssg2_iep0>, <&icssg2_iep1>;
> +
> + interrupt-parent = <&icssg2_intc>;
> + interrupts = <24 0 2>, <25 1 3>;
> + interrupt-names = "tx_ts0", "tx_ts1";
> +
> + dmas = <&main_udmap 0xc300>, /* egress slice 0 */
> + <&main_udmap 0xc301>, /* egress slice 0 */
> + <&main_udmap 0xc302>, /* egress slice 0 */
> + <&main_udmap 0xc303>, /* egress slice 0 */
> + <&main_udmap 0xc304>, /* egress slice 1 */
> + <&main_udmap 0xc305>, /* egress slice 1 */
> + <&main_udmap 0xc306>, /* egress slice 1 */
> + <&main_udmap 0xc307>, /* egress slice 1 */
> + <&main_udmap 0x4300>, /* ingress slice 0 */
> + <&main_udmap 0x4301>; /* ingress slice 1 */
> +
> + dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
> + "tx1-0", "tx1-1", "tx1-2", "tx1-3",
> + "rx0", "rx1";
> + ethernet-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + icssg2_emac0: port@0 {
> + reg = <0>;
> + phy-handle = <&icssg2_phy0>;
> + phy-mode = "rgmii-id";
> + ti,syscon-rgmii-delay = <&scm_conf 0x4120>;
> + /* Filled in by bootloader */
> + local-mac-address = [00 00 00 00 00 00];
> + };
> + icssg2_emac1: port@1 {
> + reg = <1>;
> + phy-handle = <&icssg2_phy1>;
> + phy-mode = "rgmii-id";
> + ti,syscon-rgmii-delay = <&scm_conf 0x4124>;
> + /* Filled in by bootloader */
> + local-mac-address = [00 00 00 00 00 00];
> + };
> + };
> + };
> +};
> +
> +&main_pmx0 {
> +
> + icssg2_mdio_pins_default: icssg2-mdio-default-pins {
> + pinctrl-single,pins = <
> + AM65X_IOPAD(0x0094, PIN_INPUT, 2) /* (AC19) PRG2_PRU0_GPO7.PRG2_MDIO0_MDIO */
> + AM65X_IOPAD(0x00c8, PIN_OUTPUT, 2) /* (AE15) PRG2_PRU1_GPO7.PRG2_MDIO0_MDC */
> + >;
> + };
> +
> + icssg2_rgmii_pins_default: icssg2-rgmii-default-pins {
> + pinctrl-single,pins = <
> + AM65X_IOPAD(0x00ac, PIN_INPUT, 2) /* (AH15) PRG2_PRU1_GPO0.PRG2_RGMII2_RD0 */
> + AM65X_IOPAD(0x00b0, PIN_INPUT, 2) /* (AC16) PRG2_PRU1_GPO1.PRG2_RGMII2_RD1 */
> + AM65X_IOPAD(0x00b4, PIN_INPUT, 2) /* (AD17) PRG2_PRU1_GPO2.PRG2_RGMII2_RD2 */
> + AM65X_IOPAD(0x00b8, PIN_INPUT, 2) /* (AH14) PRG2_PRU1_GPO3.PRG2_RGMII2_RD3 */
> + AM65X_IOPAD(0x00cc, PIN_OUTPUT, 2) /* (AD15) PRG2_PRU1_GPO8.PRG2_RGMII2_TD0 */
> + AM65X_IOPAD(0x00d0, PIN_OUTPUT, 2) /* (AF14) PRG2_PRU1_GPO9.PRG2_RGMII2_TD1 */
> + AM65X_IOPAD(0x00d4, PIN_OUTPUT, 2) /* (AC15) PRG2_PRU1_GPO10.PRG2_RGMII2_TD2 */
> + AM65X_IOPAD(0x00d8, PIN_OUTPUT, 2) /* (AD14) PRG2_PRU1_GPO11.PRG2_RGMII2_TD3 */
> + AM65X_IOPAD(0x00dc, PIN_INPUT, 2) /* (AE14) PRG2_PRU1_GPO16.PRG2_RGMII2_TXC */
> + AM65X_IOPAD(0x00c4, PIN_OUTPUT, 2) /* (AC17) PRG2_PRU1_GPO6.PRG2_RGMII2_TX_CTL */
> + AM65X_IOPAD(0x00c0, PIN_INPUT, 2) /* (AG15) PRG2_PRU1_GPO5.PRG2_RGMII2_RXC */
> + AM65X_IOPAD(0x00bc, PIN_INPUT, 2) /* (AG14) PRG2_PRU1_GPO4.PRG2_RGMII2_RX_CTL */
> +
> + AM65X_IOPAD(0x0078, PIN_INPUT, 2) /* (AF18) PRG2_PRU0_GPO0.PRG2_RGMII1_RD0 */
> + AM65X_IOPAD(0x007c, PIN_INPUT, 2) /* (AE18) PRG2_PRU0_GPO1.PRG2_RGMII1_RD1 */
> + AM65X_IOPAD(0x0080, PIN_INPUT, 2) /* (AH17) PRG2_PRU0_GPO2.PRG2_RGMII1_RD2 */
> + AM65X_IOPAD(0x0084, PIN_INPUT, 2) /* (AG18) PRG2_PRU0_GPO3.PRG2_RGMII1_RD3 */
> + AM65X_IOPAD(0x0098, PIN_OUTPUT, 2) /* (AH16) PRG2_PRU0_GPO8.PRG2_RGMII1_TD0 */
> + AM65X_IOPAD(0x009c, PIN_OUTPUT, 2) /* (AG16) PRG2_PRU0_GPO9.PRG2_RGMII1_TD1 */
> + AM65X_IOPAD(0x00a0, PIN_OUTPUT, 2) /* (AF16) PRG2_PRU0_GPO10.PRG2_RGMII1_TD2 */
> + AM65X_IOPAD(0x00a4, PIN_OUTPUT, 2) /* (AE16) PRG2_PRU0_GPO11.PRG2_RGMII1_TD3 */
> + AM65X_IOPAD(0x00a8, PIN_INPUT, 2) /* (AD16) PRG2_PRU0_GPO16.PRG2_RGMII1_TXC */
> + AM65X_IOPAD(0x0090, PIN_OUTPUT, 2) /* (AE17) PRG2_PRU0_GPO6.PRG2_RGMII1_TX_CTL */
> + AM65X_IOPAD(0x008c, PIN_INPUT, 2) /* (AF17) PRG2_PRU0_GPO5.PRG2_RGMII1_RXC */
> + AM65X_IOPAD(0x0088, PIN_INPUT, 2) /* (AG17) PRG2_PRU0_GPO4.PRG2_RGMII1_RX_CTL */
> + >;
> + };
> +};
> +
> +&icssg2_mdio {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&icssg2_mdio_pins_default>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + icssg2_phy0: ethernet-phy@0 {
> + reg = <0>;
> + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
> + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> + };
> +
> + icssg2_phy1: ethernet-phy@3 {
> + reg = <3>;
> + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
> + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> + };
> +};
--
Regards
Vignesh
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH v4 2/4] arm64: dts: ti: k3-am654-base-board: add ICSSG2 Ethernet support
@ 2023-10-12 9:21 ` Vignesh Raghavendra
0 siblings, 0 replies; 16+ messages in thread
From: Vignesh Raghavendra @ 2023-10-12 9:21 UTC (permalink / raw)
To: MD Danish Anwar, Nishanth Menon
Cc: Peng Fan, Udit Kumar, Nícolas F. R. A. Prado,
Neil Armstrong, Arnd Bergmann, Konrad Dybcio, Geert Uytterhoeven,
Bjorn Andersson, Will Deacon, Catalin Marinas, Conor Dooley,
Krzysztof Kozlowski, Rob Herring, Andrew Lunn, linux-kernel,
devicetree, linux-arm-kernel, Tero Kristo, linux-omap, srk,
r-gunasekaran, Andrew Davis
On 03/10/23 16:25, MD Danish Anwar wrote:
> ICSSG2 provides dual Gigabit Ethernet support.
>
> For support SR2.0 ICSSG Ethernet firmware:
Are you describing difference wrt SR1.0? Because there is no SR1.0 in
mainline today. So this doesnt make sense
> - provide different firmware blobs and use TX_PRU.
> - IEP0 is used as PTP Hardware Clock and can only be used for one port.
> - TX timestamp notification comes via INTC interrupt.
>
You are also renaming existing dts file which needs to be called out
clearly in the commit message something like:
Rename the existing k3-am654-base-board.dts to k3-am654-common-board.dts
This represents basic board where ICSSG/PRUs can be used for general
purpose. k3-am654-base-board.dtb is now made of common-board + ICSSG2
specific overlay which enables ICSSG2 dual Ethernet ports available on
base board.
> Reviewed-by: Andrew Davis <afd@ti.com>
> Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
> ---
> arch/arm64/boot/dts/ti/Makefile | 2 +
> ...se-board.dts => k3-am654-common-board.dts} | 0
> arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso | 145 ++++++++++++++++++
> 3 files changed, 147 insertions(+)
> rename arch/arm64/boot/dts/ti/{k3-am654-base-board.dts => k3-am654-common-board.dts} (100%)
> create mode 100644 arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso
>
> diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
> index e7b8e2e7f083..8f5c9515777e 100644
> --- a/arch/arm64/boot/dts/ti/Makefile
> +++ b/arch/arm64/boot/dts/ti/Makefile
> @@ -42,12 +42,14 @@ dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl-sdcard.dtb
> dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl-wlan.dtb
>
> # Boards with AM65x SoC
> +k3-am654-base-board-dtbs := k3-am654-common-board.dtb k3-am654-icssg2.dtbo
> k3-am654-gp-evm-dtbs := k3-am654-base-board.dtb k3-am654-base-board-rocktech-rk101-panel.dtbo
> dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic.dtb
> dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic-pg2.dtb
> dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb
> dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-m2.dtb
> dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb
> +dtb-$(CONFIG_ARCH_K3) += k3-am654-common-board.dtb
> dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb
> dtb-$(CONFIG_ARCH_K3) += k3-am654-gp-evm.dtb
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-common-board.dts
> similarity index 100%
> rename from arch/arm64/boot/dts/ti/k3-am654-base-board.dts
> rename to arch/arm64/boot/dts/ti/k3-am654-common-board.dts
> diff --git a/arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso b/arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso
> new file mode 100644
> index 000000000000..7b7d32282668
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso
> @@ -0,0 +1,145 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/**
> + * DT overlay for IDK application board on AM654 EVM
> + *
> + * Copyright (C) 2018-2023 Texas Instruments Incorporated - https://www.ti.com/
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/net/ti-dp83867.h>
> +#include "k3-pinctrl.h"
> +
> +&{/} {
> + aliases {
> + ethernet1 = &icssg2_emac0;
> + ethernet2 = &icssg2_emac1;
> + };
> +
> + /* Ethernet node on PRU-ICSSG2 */
> + icssg2_eth: icssg2-eth {
> + compatible = "ti,am654-icssg-prueth";
> + pinctrl-names = "default";
> + pinctrl-0 = <&icssg2_rgmii_pins_default>;
> + sram = <&msmc_ram>;
> + ti,prus = <&pru2_0>, <&rtu2_0>, <&tx_pru2_0>,
> + <&pru2_1>, <&rtu2_1>, <&tx_pru2_1>;
> + firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf",
> + "ti-pruss/am65x-sr2-rtu0-prueth-fw.elf",
> + "ti-pruss/am65x-sr2-txpru0-prueth-fw.elf",
> + "ti-pruss/am65x-sr2-pru1-prueth-fw.elf",
> + "ti-pruss/am65x-sr2-rtu1-prueth-fw.elf",
> + "ti-pruss/am65x-sr2-txpru1-prueth-fw.elf";
> +
> + ti,pruss-gp-mux-sel = <2>, /* MII mode */
> + <2>,
> + <2>,
> + <2>, /* MII mode */
> + <2>,
> + <2>;
> +
> + ti,mii-g-rt = <&icssg2_mii_g_rt>;
> + ti,mii-rt = <&icssg2_mii_rt>;
> + ti,iep = <&icssg2_iep0>, <&icssg2_iep1>;
> +
> + interrupt-parent = <&icssg2_intc>;
> + interrupts = <24 0 2>, <25 1 3>;
> + interrupt-names = "tx_ts0", "tx_ts1";
> +
> + dmas = <&main_udmap 0xc300>, /* egress slice 0 */
> + <&main_udmap 0xc301>, /* egress slice 0 */
> + <&main_udmap 0xc302>, /* egress slice 0 */
> + <&main_udmap 0xc303>, /* egress slice 0 */
> + <&main_udmap 0xc304>, /* egress slice 1 */
> + <&main_udmap 0xc305>, /* egress slice 1 */
> + <&main_udmap 0xc306>, /* egress slice 1 */
> + <&main_udmap 0xc307>, /* egress slice 1 */
> + <&main_udmap 0x4300>, /* ingress slice 0 */
> + <&main_udmap 0x4301>; /* ingress slice 1 */
> +
> + dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
> + "tx1-0", "tx1-1", "tx1-2", "tx1-3",
> + "rx0", "rx1";
> + ethernet-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + icssg2_emac0: port@0 {
> + reg = <0>;
> + phy-handle = <&icssg2_phy0>;
> + phy-mode = "rgmii-id";
> + ti,syscon-rgmii-delay = <&scm_conf 0x4120>;
> + /* Filled in by bootloader */
> + local-mac-address = [00 00 00 00 00 00];
> + };
> + icssg2_emac1: port@1 {
> + reg = <1>;
> + phy-handle = <&icssg2_phy1>;
> + phy-mode = "rgmii-id";
> + ti,syscon-rgmii-delay = <&scm_conf 0x4124>;
> + /* Filled in by bootloader */
> + local-mac-address = [00 00 00 00 00 00];
> + };
> + };
> + };
> +};
> +
> +&main_pmx0 {
> +
> + icssg2_mdio_pins_default: icssg2-mdio-default-pins {
> + pinctrl-single,pins = <
> + AM65X_IOPAD(0x0094, PIN_INPUT, 2) /* (AC19) PRG2_PRU0_GPO7.PRG2_MDIO0_MDIO */
> + AM65X_IOPAD(0x00c8, PIN_OUTPUT, 2) /* (AE15) PRG2_PRU1_GPO7.PRG2_MDIO0_MDC */
> + >;
> + };
> +
> + icssg2_rgmii_pins_default: icssg2-rgmii-default-pins {
> + pinctrl-single,pins = <
> + AM65X_IOPAD(0x00ac, PIN_INPUT, 2) /* (AH15) PRG2_PRU1_GPO0.PRG2_RGMII2_RD0 */
> + AM65X_IOPAD(0x00b0, PIN_INPUT, 2) /* (AC16) PRG2_PRU1_GPO1.PRG2_RGMII2_RD1 */
> + AM65X_IOPAD(0x00b4, PIN_INPUT, 2) /* (AD17) PRG2_PRU1_GPO2.PRG2_RGMII2_RD2 */
> + AM65X_IOPAD(0x00b8, PIN_INPUT, 2) /* (AH14) PRG2_PRU1_GPO3.PRG2_RGMII2_RD3 */
> + AM65X_IOPAD(0x00cc, PIN_OUTPUT, 2) /* (AD15) PRG2_PRU1_GPO8.PRG2_RGMII2_TD0 */
> + AM65X_IOPAD(0x00d0, PIN_OUTPUT, 2) /* (AF14) PRG2_PRU1_GPO9.PRG2_RGMII2_TD1 */
> + AM65X_IOPAD(0x00d4, PIN_OUTPUT, 2) /* (AC15) PRG2_PRU1_GPO10.PRG2_RGMII2_TD2 */
> + AM65X_IOPAD(0x00d8, PIN_OUTPUT, 2) /* (AD14) PRG2_PRU1_GPO11.PRG2_RGMII2_TD3 */
> + AM65X_IOPAD(0x00dc, PIN_INPUT, 2) /* (AE14) PRG2_PRU1_GPO16.PRG2_RGMII2_TXC */
> + AM65X_IOPAD(0x00c4, PIN_OUTPUT, 2) /* (AC17) PRG2_PRU1_GPO6.PRG2_RGMII2_TX_CTL */
> + AM65X_IOPAD(0x00c0, PIN_INPUT, 2) /* (AG15) PRG2_PRU1_GPO5.PRG2_RGMII2_RXC */
> + AM65X_IOPAD(0x00bc, PIN_INPUT, 2) /* (AG14) PRG2_PRU1_GPO4.PRG2_RGMII2_RX_CTL */
> +
> + AM65X_IOPAD(0x0078, PIN_INPUT, 2) /* (AF18) PRG2_PRU0_GPO0.PRG2_RGMII1_RD0 */
> + AM65X_IOPAD(0x007c, PIN_INPUT, 2) /* (AE18) PRG2_PRU0_GPO1.PRG2_RGMII1_RD1 */
> + AM65X_IOPAD(0x0080, PIN_INPUT, 2) /* (AH17) PRG2_PRU0_GPO2.PRG2_RGMII1_RD2 */
> + AM65X_IOPAD(0x0084, PIN_INPUT, 2) /* (AG18) PRG2_PRU0_GPO3.PRG2_RGMII1_RD3 */
> + AM65X_IOPAD(0x0098, PIN_OUTPUT, 2) /* (AH16) PRG2_PRU0_GPO8.PRG2_RGMII1_TD0 */
> + AM65X_IOPAD(0x009c, PIN_OUTPUT, 2) /* (AG16) PRG2_PRU0_GPO9.PRG2_RGMII1_TD1 */
> + AM65X_IOPAD(0x00a0, PIN_OUTPUT, 2) /* (AF16) PRG2_PRU0_GPO10.PRG2_RGMII1_TD2 */
> + AM65X_IOPAD(0x00a4, PIN_OUTPUT, 2) /* (AE16) PRG2_PRU0_GPO11.PRG2_RGMII1_TD3 */
> + AM65X_IOPAD(0x00a8, PIN_INPUT, 2) /* (AD16) PRG2_PRU0_GPO16.PRG2_RGMII1_TXC */
> + AM65X_IOPAD(0x0090, PIN_OUTPUT, 2) /* (AE17) PRG2_PRU0_GPO6.PRG2_RGMII1_TX_CTL */
> + AM65X_IOPAD(0x008c, PIN_INPUT, 2) /* (AF17) PRG2_PRU0_GPO5.PRG2_RGMII1_RXC */
> + AM65X_IOPAD(0x0088, PIN_INPUT, 2) /* (AG17) PRG2_PRU0_GPO4.PRG2_RGMII1_RX_CTL */
> + >;
> + };
> +};
> +
> +&icssg2_mdio {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&icssg2_mdio_pins_default>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + icssg2_phy0: ethernet-phy@0 {
> + reg = <0>;
> + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
> + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> + };
> +
> + icssg2_phy1: ethernet-phy@3 {
> + reg = <3>;
> + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
> + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> + };
> +};
--
Regards
Vignesh
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH v4 0/4] Add AM65x ICSSG Ethernet support
2023-10-12 9:18 ` Vignesh Raghavendra
@ 2023-10-12 9:58 ` MD Danish Anwar
-1 siblings, 0 replies; 16+ messages in thread
From: MD Danish Anwar @ 2023-10-12 9:58 UTC (permalink / raw)
To: Vignesh Raghavendra, Nishanth Menon
Cc: Peng Fan, Udit Kumar, Nícolas F. R. A. Prado,
Neil Armstrong, Arnd Bergmann, Konrad Dybcio, Geert Uytterhoeven,
Bjorn Andersson, Will Deacon, Catalin Marinas, Conor Dooley,
Krzysztof Kozlowski, Rob Herring, Andrew Lunn, linux-kernel,
devicetree, linux-arm-kernel, Tero Kristo, linux-omap, srk,
r-gunasekaran
Hi Vignesh,
On 12/10/23 14:48, Vignesh Raghavendra wrote:
>
>
> On 03/10/23 16:25, MD Danish Anwar wrote:
>> Hi All,
>>
>> This series adds support for ICSSG ethernet on AM65x SR2.0.
>> This series also enables TI_ICSSG_PRUETH as loadable kernel module.
>> This series is based on the latest next-20230925 linux-next.
>>
>> This is the v4 of the series [v1]. This addresses comments made on v3.
>>
>> Changes from v3 to v4:
>> *) Added RB tag of Andrew Davis.
>> *) Added LAKML to the --cc of this series as it was dropped in v3.
>>
>> Changes from v2 to v3:
>> *) Changed comment of icssg nodes in device trees from "Dual Ethernet
>> application node" to "Ethernet node" as asked by Andrew L.
>> *) Applied k3-am654-idk.dtbo at build time to the k3-am654-base-board.dtb
>> in order to not have orphan DTBO as asked by Andrew D.
>> *) Modified k3-am654-gp-evm.dtb to have k3-am654-icssg2.dtbo as well.
>>
>> Changes from v1 to v2:
>> *) Moved ICSSG2 nodes from k3-am654-base-board.dts to new overlay file
>> k3-am654-icssg2.dtso as asked by Andrew.
>> *) Renamed k3-am654-base-board.dts to k3-am654-common-board.dts
>> *) Added "Enable TI_ICSSG_PRUETH" patch to this series.
>>
>> [v1] https://lore.kernel.org/all/20230911071245.2173520-1-danishanwar@ti.com/
>> [v2] https://lore.kernel.org/all/20230921060913.721336-1-danishanwar@ti.com/
>> [v3] https://lore.kernel.org/all/20230926045337.1248276-1-danishanwar@ti.com/
>>
>
> Wit this series applied I see build failures like:
>
> arch/arm64/boot/dts/ti/k3-am65-main.dtsi:897.25-916.4: Warning (unique_unit_address): /bus@100000/pcie@5600000: duplicate unit-address (also used in node /bus@100000/pcie-ep@5600000)
> DTC arch/arm64/boot/dts/ti/k3-am654-icssg2.dtbo
> arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso:14.6-85.3: Warning (node_name_chars_strict): /fragment@0/__overlay__: Character '_' not recommended in node name
> arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso:87.12-125.3: Warning (node_name_chars_strict): /fragment@1/__overlay__: Character '_' not recommended in node name
> arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso:127.14-145.3: Warning (node_name_chars_strict): /fragment@2/__overlay__: Character '_' not recommended in node name
> DTOVL arch/arm64/boot/dts/ti/k3-am654-base-board.dtb
>
> Overlay 'arch/arm64/boot/dts/ti/k3-am654.dtsi' is incomplete (4096 / 1346656301 bytes read)
> make[3]: *** [scripts/Makefile.lib:402: arch/arm64/boot/dts/ti/k3-am654-base-board.dtb] Error 1
> make[2]: *** [scripts/Makefile.build:480: arch/arm64/boot/dts/ti] Error 2
> make[1]: *** [/home/a0132425/workspace/k3-next/Makefile:1391: dtbs] Error 2
> make: *** [Makefile:234: __sub-make] Error 2
>
> There probably is some race here as I see this with make -j32 dtbs
> but not on my less powerful laptop
>
I am running -j20 and I don't see this build failure whien applying the
patches and running 'make mroproper' before building.
Please try with a clean build.
I just did applied this patch on linux-next with a clean build and the
patches got applied without any failure / warnings.
>
>
>> Thanks and Regards,
>> MD Danish Anwar
>>
>> MD Danish Anwar (4):
>> arm64: dts: ti: k3-am65-main: Add ICSSG IEP nodes
>> arm64: dts: ti: k3-am654-base-board: add ICSSG2 Ethernet support
>> arm64: dts: ti: k3-am654-idk: Add ICSSG Ethernet ports
>> arm64: defconfig: Enable TI_ICSSG_PRUETH
>>
>> arch/arm64/boot/dts/ti/Makefile | 4 +
>> arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 36 +++
>> ...se-board.dts => k3-am654-common-board.dts} | 0
>> arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso | 145 +++++++++
>> arch/arm64/boot/dts/ti/k3-am654-idk.dtso | 296 ++++++++++++++++++
>> arch/arm64/configs/defconfig | 1 +
>> 6 files changed, 482 insertions(+)
>> rename arch/arm64/boot/dts/ti/{k3-am654-base-board.dts => k3-am654-common-board.dts} (100%)
>> create mode 100644 arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso
>> create mode 100644 arch/arm64/boot/dts/ti/k3-am654-idk.dtso
>>
>
--
Thanks and Regards,
Danish
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH v4 0/4] Add AM65x ICSSG Ethernet support
@ 2023-10-12 9:58 ` MD Danish Anwar
0 siblings, 0 replies; 16+ messages in thread
From: MD Danish Anwar @ 2023-10-12 9:58 UTC (permalink / raw)
To: Vignesh Raghavendra, Nishanth Menon
Cc: Peng Fan, Udit Kumar, Nícolas F. R. A. Prado,
Neil Armstrong, Arnd Bergmann, Konrad Dybcio, Geert Uytterhoeven,
Bjorn Andersson, Will Deacon, Catalin Marinas, Conor Dooley,
Krzysztof Kozlowski, Rob Herring, Andrew Lunn, linux-kernel,
devicetree, linux-arm-kernel, Tero Kristo, linux-omap, srk,
r-gunasekaran
Hi Vignesh,
On 12/10/23 14:48, Vignesh Raghavendra wrote:
>
>
> On 03/10/23 16:25, MD Danish Anwar wrote:
>> Hi All,
>>
>> This series adds support for ICSSG ethernet on AM65x SR2.0.
>> This series also enables TI_ICSSG_PRUETH as loadable kernel module.
>> This series is based on the latest next-20230925 linux-next.
>>
>> This is the v4 of the series [v1]. This addresses comments made on v3.
>>
>> Changes from v3 to v4:
>> *) Added RB tag of Andrew Davis.
>> *) Added LAKML to the --cc of this series as it was dropped in v3.
>>
>> Changes from v2 to v3:
>> *) Changed comment of icssg nodes in device trees from "Dual Ethernet
>> application node" to "Ethernet node" as asked by Andrew L.
>> *) Applied k3-am654-idk.dtbo at build time to the k3-am654-base-board.dtb
>> in order to not have orphan DTBO as asked by Andrew D.
>> *) Modified k3-am654-gp-evm.dtb to have k3-am654-icssg2.dtbo as well.
>>
>> Changes from v1 to v2:
>> *) Moved ICSSG2 nodes from k3-am654-base-board.dts to new overlay file
>> k3-am654-icssg2.dtso as asked by Andrew.
>> *) Renamed k3-am654-base-board.dts to k3-am654-common-board.dts
>> *) Added "Enable TI_ICSSG_PRUETH" patch to this series.
>>
>> [v1] https://lore.kernel.org/all/20230911071245.2173520-1-danishanwar@ti.com/
>> [v2] https://lore.kernel.org/all/20230921060913.721336-1-danishanwar@ti.com/
>> [v3] https://lore.kernel.org/all/20230926045337.1248276-1-danishanwar@ti.com/
>>
>
> Wit this series applied I see build failures like:
>
> arch/arm64/boot/dts/ti/k3-am65-main.dtsi:897.25-916.4: Warning (unique_unit_address): /bus@100000/pcie@5600000: duplicate unit-address (also used in node /bus@100000/pcie-ep@5600000)
> DTC arch/arm64/boot/dts/ti/k3-am654-icssg2.dtbo
> arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso:14.6-85.3: Warning (node_name_chars_strict): /fragment@0/__overlay__: Character '_' not recommended in node name
> arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso:87.12-125.3: Warning (node_name_chars_strict): /fragment@1/__overlay__: Character '_' not recommended in node name
> arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso:127.14-145.3: Warning (node_name_chars_strict): /fragment@2/__overlay__: Character '_' not recommended in node name
> DTOVL arch/arm64/boot/dts/ti/k3-am654-base-board.dtb
>
> Overlay 'arch/arm64/boot/dts/ti/k3-am654.dtsi' is incomplete (4096 / 1346656301 bytes read)
> make[3]: *** [scripts/Makefile.lib:402: arch/arm64/boot/dts/ti/k3-am654-base-board.dtb] Error 1
> make[2]: *** [scripts/Makefile.build:480: arch/arm64/boot/dts/ti] Error 2
> make[1]: *** [/home/a0132425/workspace/k3-next/Makefile:1391: dtbs] Error 2
> make: *** [Makefile:234: __sub-make] Error 2
>
> There probably is some race here as I see this with make -j32 dtbs
> but not on my less powerful laptop
>
I am running -j20 and I don't see this build failure whien applying the
patches and running 'make mroproper' before building.
Please try with a clean build.
I just did applied this patch on linux-next with a clean build and the
patches got applied without any failure / warnings.
>
>
>> Thanks and Regards,
>> MD Danish Anwar
>>
>> MD Danish Anwar (4):
>> arm64: dts: ti: k3-am65-main: Add ICSSG IEP nodes
>> arm64: dts: ti: k3-am654-base-board: add ICSSG2 Ethernet support
>> arm64: dts: ti: k3-am654-idk: Add ICSSG Ethernet ports
>> arm64: defconfig: Enable TI_ICSSG_PRUETH
>>
>> arch/arm64/boot/dts/ti/Makefile | 4 +
>> arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 36 +++
>> ...se-board.dts => k3-am654-common-board.dts} | 0
>> arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso | 145 +++++++++
>> arch/arm64/boot/dts/ti/k3-am654-idk.dtso | 296 ++++++++++++++++++
>> arch/arm64/configs/defconfig | 1 +
>> 6 files changed, 482 insertions(+)
>> rename arch/arm64/boot/dts/ti/{k3-am654-base-board.dts => k3-am654-common-board.dts} (100%)
>> create mode 100644 arch/arm64/boot/dts/ti/k3-am654-icssg2.dtso
>> create mode 100644 arch/arm64/boot/dts/ti/k3-am654-idk.dtso
>>
>
--
Thanks and Regards,
Danish
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2023-10-12 10:00 UTC | newest]
Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-10-03 10:55 [PATCH v4 0/4] Add AM65x ICSSG Ethernet support MD Danish Anwar
2023-10-03 10:55 ` MD Danish Anwar
2023-10-03 10:55 ` [PATCH v4 1/4] arm64: dts: ti: k3-am65-main: Add ICSSG IEP nodes MD Danish Anwar
2023-10-03 10:55 ` MD Danish Anwar
2023-10-03 10:55 ` [PATCH v4 2/4] arm64: dts: ti: k3-am654-base-board: add ICSSG2 Ethernet support MD Danish Anwar
2023-10-03 10:55 ` MD Danish Anwar
2023-10-12 9:21 ` Vignesh Raghavendra
2023-10-12 9:21 ` Vignesh Raghavendra
2023-10-03 10:55 ` [PATCH v4 3/4] arm64: dts: ti: k3-am654-idk: Add ICSSG Ethernet ports MD Danish Anwar
2023-10-03 10:55 ` MD Danish Anwar
2023-10-03 10:55 ` [PATCH v4 4/4] arm64: defconfig: Enable TI_ICSSG_PRUETH MD Danish Anwar
2023-10-03 10:55 ` MD Danish Anwar
2023-10-12 9:18 ` [PATCH v4 0/4] Add AM65x ICSSG Ethernet support Vignesh Raghavendra
2023-10-12 9:18 ` Vignesh Raghavendra
2023-10-12 9:58 ` MD Danish Anwar
2023-10-12 9:58 ` MD Danish Anwar
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.