Linux 2.6.31-rc8

Linux 2.6.31-rc8

[Linus Torvalds]

This should be the last -rc, and it's really been quieting down. There's 
131 commits there, and it's all pretty trivial. For example, in the 
dirstat below, most of the arch/x86 changes are due to some vmlinux.lds.S 
changes to fix problems with older binutils, not actual code changes. And 
on powerpc, it's all the ps3 defconfig update.

   8.7% arch/powerpc/configs/
   8.7% arch/powerpc/
   2.6% arch/sparc/configs/
   5.3% arch/sparc/kernel/
   2.8% arch/sparc/mm/
  11.2% arch/sparc/
   5.9% arch/x86/kernel/
   7.0% arch/x86/
  28.3% arch/
   2.6% drivers/acpi/
   3.5% drivers/input/
   7.6% drivers/net/
  13.5% drivers/scsi/mpt2sas/
  30.3% drivers/
   7.7% fs/9p/
   3.4% fs/ext3/
   8.6% fs/notify/inotify/
  21.4% fs/
   3.5% kernel/
   4.0% lib/
   3.0% net/9p/
   5.8% net/
   2.2% sound/core/
   3.2% sound/

So apart from the trivial but somewhat bulky stuff like that, there's a 
sparc TLB loading upddate, there's a mpt2sas driver update, and there's 
the plan9 filesystem update. And there's a few fs/notify cleanups and 
fixes that will hopefully put the inotify problems behind us for good. 
Knock wood.

The rest is pretty much one-liners with a couple of "few-liners".

I'll be gone for the next week, but it should be quiet. But pester the 
usual suspects (aka "maintainers") about any bugs you see, and they'll fix 
it while I'm diving. And then we'll have a final release for labor day.

			Linus

---
Abhishek Kulkarni (10):
      9p: Check for error in return value of v9fs_fid_add
      9p: Fix possible inode leak in v9fs_get_inode.
      9p: minor comment fixes
      9p: Fix possible memleak in v9fs_inode_from fid.
      9p: Fix v9fs show_options
      9p: Fix possible regressions when ->get_sb fails.
      9p: Remove redundant inode uid/gid assignment
      9p: Add missing cast for the error return value in v9fs_get_inode
      net/9p: insulate the client against an invalid error code sent by a 9p server
      9p: remove unnecessary v9fses->options which duplicates the mount string

Alek Du (1):
      PCI: check saved state before restore

Alexander Beregalov (2):
      irda/au1k_ir: fix broken netdev_ops conversion
      irda/sa1100_ir: fix broken netdev_ops conversion

Alexey Dobriyan (2):
      smc91x: fix compilation on SMP
      m68k: Fix redefinition of pgprot_noncached

Amerigo Wang (2):
      timers: Drop write permission on /proc/timer_list
      x86: Fix an incorrect argument of reserve_bootmem()

Andreas Mohr (1):
      net: Fix Micrel KSZ8842 Kconfig description

Andrew Morton (1):
      arch/m68k/include/asm/motorola_pgalloc.h: fix kunmap arg

Bartlomiej Zolnierkiewicz (1):
      ALSA: ali5451: fix timeout handling in snd_ali_{codecs,timer}_ready()

Ben Nizette (1):
      favr32: improve touchscreen response

Benjamin Herrenschmidt (1):
      lmb: Remove __init from lmb_end_of_DRAM()

Bruno Prémont (1):
      ipv6: Fix commit 63d9950b08184e6531adceb65f64b429909cc101 (ipv6: Make v4-mapped bindings consistent with IPv4)

Clemens Ladisch (2):
      sound: vx222: fix input level control range check
      sound: pcm_lib: fix unsorted list constraint handling

Costantino Leandro (1):
      wmi: fix kernel panic when stack protection enabled.

David Howells (1):
      AFS: Stop readlink() on AFS crashing due to NULL 'file' ptr

David Rientjes (4):
      flex_array: fix get function for elements in base starting at non-zero
      flex_array: fix flex_array_free_parts comment
      flex_array: declare parts member to have incomplete type
      flex_array: convert element_nr formals to unsigned

David S. Miller (10):
      sparc: Fix cleanup crash in bbc_envctrl_cleanup()
      sparc64: Sign extend length arg to truncate syscalls when compat.
      sparc: Use page_fault_out_of_memory() for VM_FAULT_OOM.
      sparc32: Kill trap table freeing code.
      sparc32: Update defconfig.
      sparc64: Update defconfig.
      pkt_sched: Convert qdisc_watchdog to tasklet_hrtimer
      pkt_sched: Convert CBQ to tasklet_hrtimer.
      pkt_sched: Fix bogon in tasklet_hrtimer changes.
      sparc64: Validate linear D-TLB misses.

Dmitry Torokhov (1):
      Input: wacom - don't use on-stack memory for report buffers

Dongdong Deng (3):
      netpoll: warning for ndo_start_xmit returns with interrupts enabled
      drivers/net: fixed drivers that support netpoll use ndo_start_xmit()
      smc91x: let smc91x work well under netpoll

Eric Paris (4):
      IMA: iint put in ima_counts_get and put
      inotify: seperate new watch creation updating existing watches
      inotify: do not BUG on idr entries at inotify destruction
      inotify: fix locking around inotify watching in the idr

Eric Van Hensbergen (1):
      9p: update documentation pointers

Eric W. Biederman (1):
      inotify: Ensure we alwasy write the terminating NULL.

Florian Fainelli (1):
      [WATCHDOG] ar7_wdt: fix path to ar7-specific headers

Frans Pop (2):
      ACPI processor: force throttling state when BIOS returns incorrect value
      acpi processor: remove superfluous warning message

Geert Uytterhoeven (2):
      m68k,m68knommu: Wire up rt_tgsigqueueinfo and perf_counter_open
      powerpc/ps3: Add missing check for PS3 to rtc-ps3 platform device registration

Geoff Levand (1):
      powerpc/ps3: Update ps3_defconfig

Goldwyn Rodrigues (1):
      ocfs2/dlm: Wait on lockres instead of erroring cancel requests

Hendrik Brueckner (1):
      [S390] set preferred console based on conmode

Herton Ronaldo Krzesinski (1):
      rtl8187: always set MSR_LINK_ENEDCA flag with RTL8187B

Hugh Dickins (1):
      mm: fix hugetlb bug due to user_shm_unlock call

Ingo Molnar (1):
      tracing: Fix too large stack usage in do_one_initcall()

James Bottomley (1):
      module: workaround duplicate section names

Jan Beulich (3):
      i386: Fix section mismatches for init code with !HOTPLUG_CPU
      x86: add vmlinux.lds to targets in arch/x86/boot/compressed/Makefile
      x86: Fix build with older binutils and consolidate linker script

Jan Kara (4):
      ocfs2: Handle quota file corruption more gracefully
      ocfs2: Don't oops in ocfs2_kill_sb on a failed mount
      ocfs2: Add missing lock name
      ext3: Improve error message that changing journaling mode on remount is not possible

Jeremy Fitzhardinge (3):
      x86: make sure load_percpu_segment has no stackprotector
      xen: rearrange things to fix stackprotector
      xenfb: connect to backend before registering fb

Jiri Kosina (1):
      Input: iforce - support new revision of ACT LABS Force RS

Jiri Olsa (1):
      tracing: handle broken names in ftrace filter

Jiri Slaby (1):
      NET: llc, zero sockaddr_llc struct

Johannes Berg (1):
      mac80211: fix todo lock

John Holland (1):
      [ARM] Kirkwood: enable eSATA on QNAP TS-219P

John W. Linville (1):
      orinoco: correct key bounds check in orinoco_hw_get_tkip_iv

Joonwoo Park (1):
      pps: fix incorrect verdict check

Julia Lawall (1):
      [S390] drivers/s390: put NULL test before dereference

Julien TINNES (1):
      ipv4: make ip_append_data() handle NULL routing table

Kashyap, Desai (9):
      [SCSI] mpt2sas: Introduced check for enclosure_handle to avoid crash
      [SCSI] mpt2sas: Expander fix oops saying "Already part of another port"
      [SCSI] mpt2sas: Raid 10 Value is showing as Raid 1E in /va/log/messages
      [SCSI] mpt2sas: Excessive log info causes sas iounit page time out
      [SCSI] mpt2sas: fix infinite loop inside config request
      [SCSI] mpt2sas: fix crash due to Watchdog is active while OS in standby mode
      [SCSI] mpt2sas: fix oops because drv data points to NULL on resume from hibernate
      [SCSI] mpt2sas: Bump driver version 01.100.04.00
      [SCSI] mpt2sas: fix config request and diag reset deadlock

Krzysztof Hałasa (1):
      E100: fix interaction with swiotlb on X86.

Kyle McMartin (1):
      dma-debug: Fix check_unmap null pointer dereference

Linus Torvalds (2):
      tty: make sure to flush any pending work when halting the ldisc
      Linux 2.6.31-rc8

Marek Vasut (2):
      Input: ucb1400_ts - enable ADC Filter
      pxaficp-ir: remove incorrect net_device_ops

Martin Michlmayr (1):
      [ARM] Kirkwood: __init requires linux/init.h

Mathieu Desnoyers (1):
      sparc: sys32.S incorrect compat-layer splice() system call

Michael Brunner (1):
      thermal_sys: check get_temp return value

Michel Dänzer (1):
      drm/radeon/kms: Fix radeon_gem_busy_ioctl harder.

Mimi Zohar (2):
      kernel_read: redefine offset type
      ima: hashing large files bug fix

Minchan Kim (1):
      mm: fix for infinite churning of mlocked pages

Oleg Nesterov (1):
      clone(): fix race between copy_process() and de_thread()

Patrick McHardy (1):
      netfilter: xt_quota: fix wrong return value (error case)

Pavel Revak (1):
      Input: ucb1400_ts - enable interrupt unconditionally

Peter Zijlstra (2):
      perf tools: Check perf.data owner
      perf_counter: Fix typo in read() output generation

Petri Gynther (1):
      ibm_newemac: emac_close() needs to call netif_carrier_off()

Randy Dunlap (1):
      net: fix ks8851 build errors

Roel Kluin (3):
      yellowfin: Fix buffer underrun after dev_alloc_skb() failure
      m68k: count can reach 51, not 50
      m68k: cnt reaches -1, not 0

Rusty Russell (2):
      virtio: net refill on out-of-memory
      module: fix BUG_ON() for powerpc (and other function descriptor archs)

Sebastian Andrzej Siewior (2):
      avr32/lib: fix unaligned memcpy()
      avr32/lib: fix unaligned memcpy where len < 4

Sebastian Ott (1):
      [S390] cio: fix double free after failed device initialization

Simon Kagstrom (1):
      [ARM] Orion NAND: Make asm volatile avoid GCC pushing ldrd out of the loop

Stephen Kitt (1):
      Input: joydev - decouple axis and button map ioctls from input constants

Suresh Siddha (2):
      x86, pat: Allow ISA memory range uncacheable mapping requests
      clockevent: Prevent dead lock on clockevents_lock

Tao Ma (1):
      ocfs2: release the buffer head in ocfs2_do_truncate.

Thadeu Lima de Souza Cascardo (2):
      leds: fix multiple requests and releases of IRQ for GPIO LED Trigger
      leds: after setting inverted attribute, we must update the LED

Theodore Ts'o (1):
      ext3: Update Kconfig description of EXT3_DEFAULTS_TO_ORDERED

Trond Myklebust (1):
      NFSv4: Fix an infinite looping problem with the nfs4_state_manager

Wan ZongShun (1):
      net: Rename MAC platform driver for w90p910 platform

Yinghai Lu (1):
      acpi: don't call acpi_processor_init if acpi is disabled

Zhaolei (1):
      ftrace: Unify effect of writing to trace_options and option/*

Re: Linux 2.6.31-rc8

[Arnd Hannemann]

Hi Linus,

Linus Torvalds wrote.
> This should be the last -rc, and it's really been quieting down. There's 
> 131 commits there, and it's all pretty trivial. For example, in the 
> dirstat below, most of the arch/x86 changes are due to some vmlinux.lds.S 
> changes to fix problems with older binutils, not actual code changes. And 
> on powerpc, it's all the ps3 defconfig update.

I wonder why the one liner
http://git.kernel.org/?p=linux/kernel/git/tip/linux-2.6-tip.git;a=commit;h=d560bc61575efae43595cbcb56d0ba3b9450139c
did not went in. It fixes a regression from 2.6.30:
http://bugzilla.kernel.org/show_bug.cgi?id=14062

Best regards,
Arnd

Re: Linux 2.6.31-rc8

[Ingo Molnar]

* Arnd Hannemann <hannemann@nets.rwth-aachen.de> wrote:

> Hi Linus,
> 
> Linus Torvalds wrote.
> > This should be the last -rc, and it's really been quieting down. There's 
> > 131 commits there, and it's all pretty trivial. For example, in the 
> > dirstat below, most of the arch/x86 changes are due to some vmlinux.lds.S 
> > changes to fix problems with older binutils, not actual code changes. And 
> > on powerpc, it's all the ps3 defconfig update.
> 
> I wonder why the one liner
> http://git.kernel.org/?p=linux/kernel/git/tip/linux-2.6-tip.git;a=commit;h=d560bc61575efae43595cbcb56d0ba3b9450139c
> did not went in. It fixes a regression from 2.6.30:
> http://bugzilla.kernel.org/show_bug.cgi?id=14062

It missed the previous push by a few hours - will send it today or 
tomorrow.

	Ingo

modules: Fix build error in the !CONFIG_KALLSYMS case

[Ingo Molnar]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=unknown-8bit, Size: 1457 bytes --]


* Linus Torvalds <torvalds@linux-foundation.org> wrote:

> James Bottomley (1):
>       module: workaround duplicate section names

-tip testing found that this patch breaks the build on x86 if 
CONFIG_KALLSYMS is disabled:

 kernel/module.c: In function ‘load_module’:
 kernel/module.c:2367: error: ‘struct module’ has no member named ‘sect_attrs’
 distcc[8269] ERROR: compile kernel/module.c on ph/32 failed
 make[1]: *** [kernel/module.o] Error 1
 make: *** [kernel] Error 2
 make: *** Waiting for unfinished jobs....

Commit 1b364bf misses the fact that section attributes are only 
built and dealt with if kallsyms is enabled. The patch below fixes 
this.

( note, technically speaking this should depend on CONFIG_SYSFS as
  well but this patch is correct too and keeps the #ifdef less
  intrusive - in the KALLSYMS && !SYSFS case the code is a NOP. )

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/module.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/kernel/module.c b/kernel/module.c
index eccb561..b4016d1 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -2355,8 +2355,10 @@ static noinline struct module *load_module(void __user *umod,
 	if (err < 0)
 		goto unlink;
 	add_sect_attrs(mod, hdr->e_shnum, secstrings, sechdrs);
+#ifdef CONFIG_KALLSYMS
 	if (mod->sect_attrs)
 		add_notes_attrs(mod, hdr->e_shnum, secstrings, sechdrs);
+#endif
 
 	/* Get rid of temporary copy */
 	vfree(hdr);

Re: modules: Fix build error in the !CONFIG_KALLSYMS case

[Amerigo Wang]

On Fri, Aug 28, 2009 at 10:44:56AM +0200, Ingo Molnar wrote:
>
>* Linus Torvalds <torvalds@linux-foundation.org> wrote:
>
>> James Bottomley (1):
>>       module: workaround duplicate section names
>
>-tip testing found that this patch breaks the build on x86 if 
>CONFIG_KALLSYMS is disabled:
>
> kernel/module.c: In function ‘load_module’:
> kernel/module.c:2367: error: ‘struct module’ has no member named ‘sect_attrs’
> distcc[8269] ERROR: compile kernel/module.c on ph/32 failed
> make[1]: *** [kernel/module.o] Error 1
> make: *** [kernel] Error 2
> make: *** Waiting for unfinished jobs....
>


Ouch..

>Commit 1b364bf misses the fact that section attributes are only 
>built and dealt with if kallsyms is enabled. The patch below fixes 
>this.
>
>( note, technically speaking this should depend on CONFIG_SYSFS as
>  well but this patch is correct too and keeps the #ifdef less
>  intrusive - in the KALLSYMS && !SYSFS case the code is a NOP. )
>
>Signed-off-by: Ingo Molnar <mingo@elte.hu>


I reviewed that patch. This one looks fine.

Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>


Thanks!



>---
> kernel/module.c |    2 ++
> 1 files changed, 2 insertions(+), 0 deletions(-)
>
>diff --git a/kernel/module.c b/kernel/module.c
>index eccb561..b4016d1 100644
>--- a/kernel/module.c
>+++ b/kernel/module.c
>@@ -2355,8 +2355,10 @@ static noinline struct module *load_module(void __user *umod,
> 	if (err < 0)
> 		goto unlink;
> 	add_sect_attrs(mod, hdr->e_shnum, secstrings, sechdrs);
>+#ifdef CONFIG_KALLSYMS
> 	if (mod->sect_attrs)
> 		add_notes_attrs(mod, hdr->e_shnum, secstrings, sechdrs);
>+#endif
> 
> 	/* Get rid of temporary copy */
> 	vfree(hdr);
>--
>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at  http://vger.kernel.org/majordomo-info.html
>Please read the FAQ at  http://www.tux.org/lkml/

Re: modules: Fix build error in the !CONFIG_KALLSYMS case

[James Bottomley]

On Fri, 2009-08-28 at 10:44 +0200, Ingo Molnar wrote:
> * Linus Torvalds <torvalds@linux-foundation.org> wrote:
> 
> > James Bottomley (1):
> >       module: workaround duplicate section names
> 
> -tip testing found that this patch breaks the build on x86 if 
> CONFIG_KALLSYMS is disabled:
> 
>  kernel/module.c: In function ‘load_module’:
>  kernel/module.c:2367: error: ‘struct module’ has no member named ‘sect_attrs’
>  distcc[8269] ERROR: compile kernel/module.c on ph/32 failed
>  make[1]: *** [kernel/module.o] Error 1
>  make: *** [kernel] Error 2
>  make: *** Waiting for unfinished jobs....
> 
> Commit 1b364bf misses the fact that section attributes are only 
> built and dealt with if kallsyms is enabled. The patch below fixes 
> this.

Thanks for finding the bug.

> ( note, technically speaking this should depend on CONFIG_SYSFS as
>   well but this patch is correct too and keeps the #ifdef less
>   intrusive - in the KALLSYMS && !SYSFS case the code is a NOP. )

Agree with this, but there is a way of fixing it, see below.

> Signed-off-by: Ingo Molnar <mingo@elte.hu>
> ---
>  kernel/module.c |    2 ++
>  1 files changed, 2 insertions(+), 0 deletions(-)
> 
> diff --git a/kernel/module.c b/kernel/module.c
> index eccb561..b4016d1 100644
> --- a/kernel/module.c
> +++ b/kernel/module.c
> @@ -2355,8 +2355,10 @@ static noinline struct module *load_module(void __user *umod,
>  	if (err < 0)
>  		goto unlink;
>  	add_sect_attrs(mod, hdr->e_shnum, secstrings, sechdrs);
> +#ifdef CONFIG_KALLSYMS
>  	if (mod->sect_attrs)
>  		add_notes_attrs(mod, hdr->e_shnum, secstrings, sechdrs);
> +#endif

Rather than adding to the #ifdef litter in the file, isn't it better to
move the test to a section of it that's already ifdef'd?

This also fixes the problem of depending on CONFIG_SYSFS you mention.

James

---

diff --git a/kernel/module.c b/kernel/module.c
index eccb561..2d53718 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -1274,6 +1274,10 @@ static void add_notes_attrs(struct module *mod, unsigned int nsect,
 	struct module_notes_attrs *notes_attrs;
 	struct bin_attribute *nattr;
 
+	/* failed to create section attributes, so can't create notes */
+	if (!mod->sect_attrs)
+		return;
+
 	/* Count notes sections and allocate structures.  */
 	notes = 0;
 	for (i = 0; i < nsect; i++)
@@ -2355,8 +2359,7 @@ static noinline struct module *load_module(void __user *umod,
 	if (err < 0)
 		goto unlink;
 	add_sect_attrs(mod, hdr->e_shnum, secstrings, sechdrs);
-	if (mod->sect_attrs)
-		add_notes_attrs(mod, hdr->e_shnum, secstrings, sechdrs);
+	add_notes_attrs(mod, hdr->e_shnum, secstrings, sechdrs);
 
 	/* Get rid of temporary copy */
 	vfree(hdr);

Re: modules: Fix build error in the !CONFIG_KALLSYMS case

[Rusty Russell]

On Fri, 28 Aug 2009 06:14:56 pm Ingo Molnar wrote:
> 
> * Linus Torvalds <torvalds@linux-foundation.org> wrote:
> 
> > James Bottomley (1):
> >       module: workaround duplicate section names
> 
> -tip testing found that this patch breaks the build on x86 if 
> CONFIG_KALLSYMS is disabled:
> 
>  kernel/module.c: In function ‘load_module’:
>  kernel/module.c:2367: error: ‘struct module’ has no member named ‘sect_attrs’
>  distcc[8269] ERROR: compile kernel/module.c on ph/32 failed
>  make[1]: *** [kernel/module.o] Error 1
>  make: *** [kernel] Error 2
>  make: *** Waiting for unfinished jobs....
> 
> Commit 1b364bf misses the fact that section attributes are only 
> built and dealt with if kallsyms is enabled. The patch below fixes 
> this.
> 
> ( note, technically speaking this should depend on CONFIG_SYSFS as
>   well but this patch is correct too and keeps the #ifdef less
>   intrusive - in the KALLSYMS && !SYSFS case the code is a NOP. )
> 
> Signed-off-by: Ingo Molnar <mingo@elte.hu>

Acked-by: Rusty Russell <rusty@rustcorp.com.au>

Thanks,
Rusty.

Re: modules: Fix build error in the !CONFIG_KALLSYMS case

[Ingo Molnar]

* James Bottomley <James.Bottomley@HansenPartnership.com> wrote:

> On Fri, 2009-08-28 at 10:44 +0200, Ingo Molnar wrote:
> > * Linus Torvalds <torvalds@linux-foundation.org> wrote:
> > 
> > > James Bottomley (1):
> > >       module: workaround duplicate section names
> > 
> > -tip testing found that this patch breaks the build on x86 if 
> > CONFIG_KALLSYMS is disabled:
> > 
> >  kernel/module.c: In function ???load_module???:
> >  kernel/module.c:2367: error: ???struct module??? has no member named ???sect_attrs???
> >  distcc[8269] ERROR: compile kernel/module.c on ph/32 failed
> >  make[1]: *** [kernel/module.o] Error 1
> >  make: *** [kernel] Error 2
> >  make: *** Waiting for unfinished jobs....
> > 
> > Commit 1b364bf misses the fact that section attributes are only 
> > built and dealt with if kallsyms is enabled. The patch below fixes 
> > this.
> 
> Thanks for finding the bug.
> 
> > ( note, technically speaking this should depend on CONFIG_SYSFS as
> >   well but this patch is correct too and keeps the #ifdef less
> >   intrusive - in the KALLSYMS && !SYSFS case the code is a NOP. )
> 
> Agree with this, but there is a way of fixing it, see below.
> 
> > Signed-off-by: Ingo Molnar <mingo@elte.hu>
> > ---
> >  kernel/module.c |    2 ++
> >  1 files changed, 2 insertions(+), 0 deletions(-)
> > 
> > diff --git a/kernel/module.c b/kernel/module.c
> > index eccb561..b4016d1 100644
> > --- a/kernel/module.c
> > +++ b/kernel/module.c
> > @@ -2355,8 +2355,10 @@ static noinline struct module *load_module(void __user *umod,
> >  	if (err < 0)
> >  		goto unlink;
> >  	add_sect_attrs(mod, hdr->e_shnum, secstrings, sechdrs);
> > +#ifdef CONFIG_KALLSYMS
> >  	if (mod->sect_attrs)
> >  		add_notes_attrs(mod, hdr->e_shnum, secstrings, sechdrs);
> > +#endif
> 
> Rather than adding to the #ifdef litter in the file, isn't it better to
> move the test to a section of it that's already ifdef'd?
> 
> This also fixes the problem of depending on CONFIG_SYSFS you mention.
> 
> James
> 
> ---
> 
> diff --git a/kernel/module.c b/kernel/module.c
> index eccb561..2d53718 100644
> --- a/kernel/module.c
> +++ b/kernel/module.c
> @@ -1274,6 +1274,10 @@ static void add_notes_attrs(struct module *mod, unsigned int nsect,
>  	struct module_notes_attrs *notes_attrs;
>  	struct bin_attribute *nattr;
>  
> +	/* failed to create section attributes, so can't create notes */
> +	if (!mod->sect_attrs)
> +		return;

yep, this is cleaner.

	Ingo

Re: Linux 2.6.31-rc8

[Eric Paris]

2009/8/27 Linus Torvalds <torvalds@linux-foundation.org>:

> So apart from the trivial but somewhat bulky stuff like that, there's a
> sparc TLB loading upddate, there's a mpt2sas driver update, and there's
> the plan9 filesystem update. And there's a few fs/notify cleanups and
> fixes that will hopefully put the inotify problems behind us for good.
> Knock wood.

Knocking on wood failed.  I actually screwed inotify up worse in -rc8
than ever before (2 new regressions including inotify never gets
events!!)

Sorry to everyone out there trying to use -rc8...

-Eric

Re: Linux 2.6.31-rc8

[Alejandro Riveira Fernández]

El Thu, 27 Aug 2009 18:24:09 -0700 (PDT)
Linus Torvalds <torvalds@linux-foundation.org> escribió:

> 
> This should be the last -rc, and it's really been quieting down. There's 
> 131 commits there, and it's all pretty trivial. For example, in the 
> dirstat below, most of the arch/x86 changes are due to some vmlinux.lds.S 
> changes to fix problems with older binutils, not actual code changes. And 
> on powerpc, it's all the ps3 defconfig update.

[ ... ]

 This rc hangs during boot in this stage 
  
  Registered led device: rt2500pci-phy0::quality
 
 Last rc i tied is rc5 which booted fine.
 i attach the dmesg from a succesfull boot of 2.6.30 estable
 (yeah i know nvidia module crap and all that. rc5 and rc8 where tested without
 nvidia module)

> 
> I'll be gone for the next week, but it should be quiet. But pester the 
> usual suspects (aka "maintainers") about any bugs you see, and they'll fix 
> it while I'm diving. And then we'll have a final release for labor day.

 
[    0.000000] Linux version 2.6.30.5-00282-ga1e74cc (alex@varda) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #25 SMP PREEMPT Mon Aug 17 13:09:08 CEST 2009
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.30.5-00282-ga1e74cc root=UUID=22b22080-8f07-4864-9b26-a62f2e8c96f7 ro quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   AMD AuthenticAMD
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable)
[    0.000000]  BIOS-e820: 00000000bffb0000 - 00000000bffc0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bffc0000 - 00000000bfff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[    0.000000] DMI present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xbffb0 max_arch_pfn = 0x100000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FF80000000 write-back
[    0.000000]   1 base 0080000000 mask FFC0000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] init_memory_mapping: 0000000000000000-00000000bffb0000
[    0.000000]  0000000000 - 00bfe00000 page 2M
[    0.000000]  00bfe00000 - 00bffb0000 page 4k
[    0.000000] kernel direct mapping tables up to bffb0000 @ 10000-15000
[    0.000000] RAMDISK: 37b71000 - 37fefcb1
[    0.000000] ACPI: RSDP 00000000000f90f0 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 00000000bffb0000 00040 (v01 A M I  OEMRSDT  03000715 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000bffb0200 00084 (v02 A M I  OEMFACP  12000601 MSFT 00000097)
[    0.000000] ACPI: DSDT 00000000bffb0440 04B5A (v01  AM2ES AM2ES136 00000136 INTL 02002026)
[    0.000000] ACPI: FACS 00000000bffc0000 00040
[    0.000000] ACPI: APIC 00000000bffb0390 00068 (v01 A M I  OEMAPIC  03000715 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000bffb0400 0003C (v01 A M I  OEMMCFG  03000715 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000bffb4fa0 0002B (v01 OEM_ID OEMTBLID 00000001 INTL 02002026)
[    0.000000] ACPI: OEMB 00000000bffc0040 00056 (v01 A M I  AMI_OEM  03000715 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000bffb4fd0 00038 (v01 A M I  OEMHPET  03000715 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000bffb5010 001C4 (v01 A M I  POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] (7 early reservations) ==> bootmem [0000000000 - 00bffb0000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #2 [0000200000 - 0000623c0c]    TEXT DATA BSS ==> [0000200000 - 0000623c0c]
[    0.000000]   #3 [0037b71000 - 0037fefcb1]          RAMDISK ==> [0037b71000 - 0037fefcb1]
[    0.000000]   #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #5 [0000624000 - 0000624123]              BRK ==> [0000624000 - 0000624123]
[    0.000000]   #6 [0000010000 - 0000013000]          PGTABLE ==> [0000010000 - 0000013000]
[    0.000000]  [ffffe20000000000-ffffe200029fffff] PMD -> [ffff880001200000-ffff880003bfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00100000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000bffb0
[    0.000000] On node 0 totalpages: 786239
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 1161 pages reserved
[    0.000000]   DMA zone: 2766 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10695 pages used for memmap
[    0.000000]   DMA32 zone: 771561 pages, LIFO batch:31
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 3, version 0, address 0xfec10000, GSI 24-44
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 45
[    0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:3f380000)
[    0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 25 pages at ffff88000101c000, static data 70340 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 774327
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.30.5-00282-ga1e74cc root=UUID=22b22080-8f07-4864-9b26-a62f2e8c96f7 ro quiet splash
[    0.000000] Initializing CPU#0
[    0.000000] Preemptible RCU implementation.
[    0.000000] NR_IRQS:320
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2000.104 MHz processor.
[    0.000999] Console: colour VGA+ 80x25
[    0.000999] console [tty0] enabled
[    0.000999] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000999] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000999] Checking aperture...
[    0.000999] No AGP bridge found
[    0.000999] Node 0: aperture @ b56a000000 size 32 MB
[    0.000999] Aperture beyond 4GB. Ignoring.
[    0.000999] Memory: 3085832k/3145408k available (2294k kernel code, 452k absent, 58392k reserved, 1080k data, 360k init)
[    0.000999] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000999] hpet clockevent registered
[    0.000999] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.001009] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.20 BogoMIPS (lpj=2000104)
[    0.001040] Mount-cache hash table entries: 256
[    0.001185] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.001188] CPU: L2 Cache: 512K (64 bytes/line)
[    0.001190] tseg: 0000000000
[    0.001201] CPU: Physical Processor ID: 0
[    0.001203] CPU: Processor Core ID: 0
[    0.001214] using C1E aware idle routine
[    0.001228] ACPI: Core revision 20090320
[    0.007045] Setting APIC routing to flat
[    0.007769] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.018077] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[    0.018997] Booting processor 1 APIC 0x1 ip 0x6000
[    0.000999] Initializing CPU#1
[    0.000999] Calibrating delay using timer specific routine.. 3999.75 BogoMIPS (lpj=1999876)
[    0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.000999] CPU: L2 Cache: 512K (64 bytes/line)
[    0.000999] CPU: Physical Processor ID: 0
[    0.000999] CPU: Processor Core ID: 1
[    0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[    0.089407] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[    0.089419] Brought up 2 CPUs
[    0.089422] Total of 2 processors activated (7999.96 BogoMIPS).
[    0.089561] CPU0 attaching sched-domain:
[    0.089565]  domain 0: span 0-1 level CPU
[    0.089567]   groups: 0 1
[    0.089572] CPU1 attaching sched-domain:
[    0.089574]  domain 0: span 0-1 level CPU
[    0.089577]   groups: 1 0
[    0.089635] net_namespace: 1720 bytes
[    0.090121] NET: Registered protocol family 16
[    0.090121] node 0 link 0: io port [1000, ffffff]
[    0.090121] TOM: 00000000c0000000 aka 3072M
[    0.090121] node 0 link 0: mmio [e0000000, efffffff]
[    0.090121] node 0 link 0: mmio [a0000, bffff]
[    0.090121] node 0 link 0: mmio [c0000000, ffffffff]
[    0.090121] bus: [00,ff] on node 0 link 0
[    0.090121] bus: 00 index 0 io port: [0, ffff]
[    0.090121] bus: 00 index 1 mmio: [c0000000, fcffffffff]
[    0.090121] bus: 00 index 2 mmio: [a0000, bffff]
[    0.090121] ACPI: bus type pci registered
[    0.090121] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.090121] PCI: Not using MMCONFIG.
[    0.090121] PCI: Using configuration type 1 for base access
[    0.092025] bio: create slab <bio-0> at 0
[    0.093474] ACPI: EC: Look up EC in DSDT
[    0.102354] ACPI: Interpreter enabled
[    0.102359] ACPI: (supports S0 S1 S3 S5)
[    0.102378] ACPI: Using IOAPIC for interrupt routing
[    0.102436] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.107576] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    0.112952] PCI: Using MMCONFIG at e0000000 - efffffff
[    0.121103] ACPI Warning (tbutils-0246): Incorrect checksum in table [OEMB] - 52, should be 2D [20090320]
[    0.121188] ACPI: No dock devices found.
[    0.122056] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.122088] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.122088] pci 0000:00:01.0: PME# disabled
[    0.122105] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.122109] pci 0000:00:02.0: PME# disabled
[    0.122144] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.122147] pci 0000:00:03.0: PME# disabled
[    0.122182] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.122185] pci 0000:00:04.0: PME# disabled
[    0.122242] pci 0000:00:12.0: reg 10 io port: [0xc800-0xc8ff]
[    0.122248] pci 0000:00:12.0: reg 14 32bit mmio: [0xdbfefc00-0xdbfefcff]
[    0.122274] pci 0000:00:12.0: PME# supported from D3hot D3cold
[    0.122278] pci 0000:00:12.0: PME# disabled
[    0.122295] pci 0000:00:13.0: reg 10 32bit mmio: [0xdbfee000-0xdbfeefff]
[    0.122331] pci 0000:00:13.1: reg 10 32bit mmio: [0xdbfed000-0xdbfedfff]
[    0.122366] pci 0000:00:13.2: reg 10 32bit mmio: [0xdbfec000-0xdbfecfff]
[    0.122412] pci 0000:00:13.3: reg 10 32bit mmio: [0xdbfef800-0xdbfef8ff]
[    0.122444] pci 0000:00:13.3: PME# supported from D0 D3hot D3cold
[    0.122447] pci 0000:00:13.3: PME# disabled
[    0.122479] pci 0000:00:14.0: reg 10 64bit mmio: [0xdbfd4000-0xdbfd7fff]
[    0.122506] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
[    0.122509] pci 0000:00:14.0: PME# disabled
[    0.122600] pci 0000:00:15.1: quirk: region 4000-403f claimed by ali7101 ACPI
[    0.122645] pci 0000:00:16.0: reg 20 io port: [0xff00-0xff0f]
[    0.122685] pci 0000:00:16.1: reg 10 io port: [0xc400-0xc407]
[    0.122690] pci 0000:00:16.1: reg 14 io port: [0xc000-0xc003]
[    0.122696] pci 0000:00:16.1: reg 18 io port: [0xb800-0xb807]
[    0.122701] pci 0000:00:16.1: reg 1c io port: [0xb400-0xb403]
[    0.122707] pci 0000:00:16.1: reg 20 io port: [0xb000-0xb00f]
[    0.122712] pci 0000:00:16.1: reg 24 32bit mmio: [0xdbfef400-0xdbfef7ff]
[    0.122728] pci 0000:00:16.1: PME# supported from D3hot
[    0.122731] pci 0000:00:16.1: PME# disabled
[    0.122838] pci 0000:01:00.0: reg 10 32bit mmio: [0xdd000000-0xddffffff]
[    0.122847] pci 0000:01:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
[    0.122855] pci 0000:01:00.0: reg 1c 64bit mmio: [0xdc000000-0xdcffffff]
[    0.122986] pci 0000:01:00.0: reg 24 io port: [0xd800-0xd87f]
[    0.122992] pci 0000:01:00.0: reg 30 32bit mmio: [0xdeee0000-0xdeefffff]
[    0.123034] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
[    0.123038] pci 0000:00:01.0: bridge 32bit mmio: [0xdc000000-0xdeefffff]
[    0.123042] pci 0000:00:01.0: bridge 32bit mmio pref: [0xc0000000-0xcfffffff]
[    0.123067] pci 0000:00:02.0: bridge 32bit mmio pref: [0xdad00000-0xdadfffff]
[    0.123093] pci 0000:00:03.0: bridge 32bit mmio pref: [0xdae00000-0xdaefffff]
[    0.123118] pci 0000:00:04.0: bridge 32bit mmio pref: [0xdaf00000-0xdaffffff]
[    0.123161] pci 0000:05:0a.0: reg 10 32bit mmio: [0xdeffe000-0xdeffffff]
[    0.123231] pci 0000:05:0b.0: reg 10 io port: [0xe800-0xe8ff]
[    0.123238] pci 0000:05:0b.0: reg 14 32bit mmio: [0xdeffdc00-0xdeffdcff]
[    0.123261] pci 0000:05:0b.0: reg 30 32bit mmio: [0xdefc0000-0xdefdffff]
[    0.123278] pci 0000:05:0b.0: supports D1 D2
[    0.123280] pci 0000:05:0b.0: PME# supported from D1 D2 D3hot D3cold
[    0.123285] pci 0000:05:0b.0: PME# disabled
[    0.123314] pci 0000:05:0c.0: reg 10 32bit mmio: [0xdeffc000-0xdeffcfff]
[    0.123353] pci 0000:05:0c.0: PME# supported from D0 D1 D3hot D3cold
[    0.123357] pci 0000:05:0c.0: PME# disabled
[    0.123387] pci 0000:05:0c.1: reg 10 32bit mmio: [0xdeff3000-0xdeff3fff]
[    0.123425] pci 0000:05:0c.1: PME# supported from D0 D1 D3hot D3cold
[    0.123430] pci 0000:05:0c.1: PME# disabled
[    0.123459] pci 0000:05:0c.2: reg 10 32bit mmio: [0xdeff2000-0xdeff2fff]
[    0.123498] pci 0000:05:0c.2: PME# supported from D0 D1 D3hot D3cold
[    0.123502] pci 0000:05:0c.2: PME# disabled
[    0.123537] pci 0000:05:0c.3: reg 10 32bit mmio: [0xdeffd800-0xdeffd8ff]
[    0.123580] pci 0000:05:0c.3: PME# supported from D0 D3hot D3cold
[    0.123584] pci 0000:05:0c.3: PME# disabled
[    0.123619] pci 0000:00:11.0: bridge io port: [0xe000-0xefff]
[    0.123623] pci 0000:00:11.0: bridge 32bit mmio: [0xdef00000-0xdeffffff]
[    0.123638] pci_bus 0000:00: on NUMA node 0
[    0.123644] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.123739] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE2P._PRT]
[    0.123852] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB1._PRT]
[    0.123915] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB2._PRT]
[    0.123986] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB3._PRT]
[    0.124059] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB4._PRT]
[    0.137176] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.138134] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.138332] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.138528] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.138727] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.138924] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 6 *10 11 12 14 15)
[    0.139125] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.139322] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.139518] ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.139574] SCSI subsystem initialized
[    0.139574] libata version 3.00 loaded.
[    0.139998] PCI: Using ACPI for IRQ routing
[    0.148100] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.148106] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.151987] Switched to high resolution mode on CPU 0
[    0.152364] Switched to high resolution mode on CPU 1
[    0.160012] pnp: PnP ACPI init
[    0.160021] ACPI: bus type pnp registered
[    0.165382] pnp: PnP ACPI: found 15 devices
[    0.165384] ACPI: ACPI bus type pnp unregistered
[    0.165398] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[    0.165402] system 00:07: ioport range 0x4000-0x40bf could not be reserved
[    0.165405] system 00:07: ioport range 0x40c0-0x40df has been reserved
[    0.165408] system 00:07: ioport range 0x400-0x40f has been reserved
[    0.165412] system 00:07: ioport range 0x480-0x48f has been reserved
[    0.165416] system 00:07: iomem range 0xfff80000-0xffffffff has been reserved
[    0.165419] system 00:07: iomem range 0xfec10000-0xfec10fff could not be reserved
[    0.165423] system 00:07: iomem range 0xfe000000-0xfe0000ff has been reserved
[    0.165429] system 00:09: iomem range 0xff380000-0xffffffff could not be reserved
[    0.165433] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.165436] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.165443] system 00:0c: ioport range 0x290-0x29f has been reserved
[    0.165449] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[    0.165455] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[    0.165459] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[    0.165462] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[    0.165465] system 00:0e: iomem range 0x100000-0xbfffffff could not be reserved
[    0.170470] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.170473] pci 0000:00:01.0:   IO window: 0xd000-0xdfff
[    0.170478] pci 0000:00:01.0:   MEM window: 0xdc000000-0xdeefffff
[    0.170481] pci 0000:00:01.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff
[    0.170486] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
[    0.170488] pci 0000:00:02.0:   IO window: disabled
[    0.170491] pci 0000:00:02.0:   MEM window: disabled
[    0.170494] pci 0000:00:02.0:   PREFETCH window: 0x000000dad00000-0x000000dadfffff
[    0.170499] pci 0000:00:03.0: PCI bridge, secondary bus 0000:03
[    0.170501] pci 0000:00:03.0:   IO window: disabled
[    0.170504] pci 0000:00:03.0:   MEM window: disabled
[    0.170507] pci 0000:00:03.0:   PREFETCH window: 0x000000dae00000-0x000000daefffff
[    0.170512] pci 0000:00:04.0: PCI bridge, secondary bus 0000:04
[    0.170514] pci 0000:00:04.0:   IO window: disabled
[    0.170517] pci 0000:00:04.0:   MEM window: disabled
[    0.170520] pci 0000:00:04.0:   PREFETCH window: 0x000000daf00000-0x000000daffffff
[    0.170525] pci 0000:00:11.0: PCI bridge, secondary bus 0000:05
[    0.170529] pci 0000:00:11.0:   IO window: 0xe000-0xefff
[    0.170533] pci 0000:00:11.0:   MEM window: 0xdef00000-0xdeffffff
[    0.170536] pci 0000:00:11.0:   PREFETCH window: disabled
[    0.170549] pci 0000:00:01.0: PCI INT A -> GSI 29 (level, low) -> IRQ 29
[    0.170553] pci 0000:00:01.0: setting latency timer to 64
[    0.170560] pci 0000:00:02.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34
[    0.170563] pci 0000:00:02.0: setting latency timer to 64
[    0.170569] pci 0000:00:03.0: PCI INT A -> GSI 39 (level, low) -> IRQ 39
[    0.170573] pci 0000:00:03.0: setting latency timer to 64
[    0.170579] pci 0000:00:04.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44
[    0.170582] pci 0000:00:04.0: setting latency timer to 64
[    0.170587] pci 0000:00:11.0: setting latency timer to 64
[    0.170592] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.170595] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.170598] pci_bus 0000:01: resource 0 io:  [0xd000-0xdfff]
[    0.170601] pci_bus 0000:01: resource 1 mem: [0xdc000000-0xdeefffff]
[    0.170604] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
[    0.170607] pci_bus 0000:02: resource 2 pref mem [0xdad00000-0xdadfffff]
[    0.170610] pci_bus 0000:03: resource 2 pref mem [0xdae00000-0xdaefffff]
[    0.170613] pci_bus 0000:04: resource 2 pref mem [0xdaf00000-0xdaffffff]
[    0.170617] pci_bus 0000:05: resource 0 io:  [0xe000-0xefff]
[    0.170619] pci_bus 0000:05: resource 1 mem: [0xdef00000-0xdeffffff]
[    0.170655] NET: Registered protocol family 2
[    0.197078] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.198182] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.200817] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.201457] TCP: Hash tables configured (established 262144 bind 65536)
[    0.201460] TCP reno registered
[    0.213099] NET: Registered protocol family 1
[    0.213163] Trying to unpack rootfs image as initramfs...
[    0.384116] Freeing initrd memory: 4603k freed
[    0.391873] VFS: Disk quotas dquot_6.5.2
[    0.391987] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.392455] msgmni has been set to 6037
[    0.392587] io scheduler noop registered
[    0.392599] io scheduler cfq registered (default)
[    0.392621] pci 0000:00:00.0: Enabling HT MSI Mapping
[    0.392644] pci 0000:00:01.0: Enabling HT MSI Mapping
[    0.392663] pci 0000:00:02.0: Enabling HT MSI Mapping
[    0.392682] pci 0000:00:03.0: Enabling HT MSI Mapping
[    0.392700] pci 0000:00:04.0: Enabling HT MSI Mapping
[    0.426057] pci 0000:01:00.0: Boot video device
[    0.426264] pcieport-driver 0000:00:01.0: irq 45 for MSI/MSI-X
[    0.426272] pcieport-driver 0000:00:01.0: setting latency timer to 64
[    0.426480] pcieport-driver 0000:00:02.0: irq 46 for MSI/MSI-X
[    0.426487] pcieport-driver 0000:00:02.0: setting latency timer to 64
[    0.426703] pcieport-driver 0000:00:03.0: irq 47 for MSI/MSI-X
[    0.426711] pcieport-driver 0000:00:03.0: setting latency timer to 64
[    0.426918] pcieport-driver 0000:00:04.0: irq 48 for MSI/MSI-X
[    0.426925] pcieport-driver 0000:00:04.0: setting latency timer to 64
[    0.427379] aer 0000:00:01.0:pcie02: service driver aer loaded
[    0.427409] aer 0000:00:02.0:pcie02: service driver aer loaded
[    0.427438] aer 0000:00:03.0:pcie02: service driver aer loaded
[    0.427467] aer 0000:00:04.0:pcie02: service driver aer loaded
[    0.431710] Linux agpgart interface v0.103
[    0.433882] brd: module loaded
[    0.433934] Driver 'sd' needs updating - please use bus_type methods
[    0.434014] ahci 0000:00:16.1: version 3.0
[    0.434031] ahci 0000:00:16.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    0.434127] ahci 0000:00:16.1: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    0.434131] ahci 0000:00:16.1: flags: ncq sntf ilck pm led clo pmp pio slum part 
[    0.434588] scsi0 : ahci
[    0.434777] scsi1 : ahci
[    0.434905] scsi2 : ahci
[    0.435049] scsi3 : ahci
[    0.435222] ata1: SATA max UDMA/133 abar m1024@0xdbfef400 port 0xdbfef500 irq 21
[    0.435226] ata2: SATA max UDMA/133 abar m1024@0xdbfef400 port 0xdbfef580 irq 21
[    0.435230] ata3: SATA max UDMA/133 abar m1024@0xdbfef400 port 0xdbfef600 irq 21
[    0.435233] ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 21
[    0.435358] pata_ali 0000:00:16.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    0.435497] scsi4 : pata_ali
[    0.435640] scsi5 : pata_ali
[    0.437759] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    0.437763] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    0.437933] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.437935] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.438490] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.438667] mice: PS/2 mouse device common for all mice
[    0.438795] rtc_cmos 00:02: RTC can wake from S4
[    0.438865] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.438897] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[    0.438938] cpuidle: using governor ladder
[    0.438941] cpuidle: using governor menu
[    0.439399] TCP cubic registered
[    0.439585] registered taskstats version 1
[    0.439780] rtc_cmos 00:02: setting system clock to 2009-08-28 21:04:21 UTC (1251493461)
[    0.465383] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.592453] ata5.01: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
[    0.592456] ata5.01: 160086528 sectors, multi 16: LBA 
[    0.598368] ata5.01: configured for UDMA/133
[    0.740024] ata2: SATA link down (SStatus 0 SControl 300)
[    0.740040] ata3: SATA link down (SStatus 0 SControl 300)
[    0.893022] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.933702] ata1.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
[    0.933705] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    0.992029] ata1.00: configured for UDMA/133
[    1.003355] scsi 0:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
[    1.003669] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[    1.003684] sd 0:0:0:0: [sda] Write Protect is off
[    1.003687] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.003708] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.003795]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    1.062481] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.311040] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.337871] ata4.00: ATA-8: ST3500418AS, CC34, max UDMA/133
[    1.337874] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.377260] ata4.00: configured for UDMA/133
[    1.388079] scsi 3:0:0:0: Direct-Access     ATA      ST3500418AS      CC34 PQ: 0 ANSI: 5
[    1.388348] scsi 4:0:1:0: Direct-Access     ATA      Maxtor 6Y080L0   YAR4 PQ: 0 ANSI: 5
[    1.388352] sd 3:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[    1.388367] sd 3:0:0:0: [sdb] Write Protect is off
[    1.388370] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.388390] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.388484]  sdb:<5>sd 4:0:1:0: [sdc] 160086528 512-byte hardware sectors: (81.9 GB/76.3 GiB)
[    1.388745] sd 4:0:1:0: [sdc] Write Protect is off
[    1.388748] sd 4:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[    1.388766] sd 4:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.388841]  sdc: sdb1 sdb2 sdb3 sdb4 < sdc1 sdc2 sdc3
[    1.396239] sd 4:0:1:0: [sdc] Attached SCSI disk
[    1.402691]  sdb5 sdb6 >
[    1.416862] sd 3:0:0:0: [sdb] Attached SCSI disk
[    1.542306] ata6.00: ATAPI: _NEC DVD_RW ND-3540A, 1.01, max UDMA/33
[    1.542329] ata6.00: WARNING: ATAPI DMA disabled for reliablity issues.  It can be enabled
[    1.542332] ata6.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.
[    1.548236] ata6.00: configured for UDMA/33
[    1.549566] scsi 5:0:0:0: CD-ROM            _NEC     DVD_RW ND-3540A  1.01 PQ: 0 ANSI: 5
[    1.549764] Freeing unused kernel memory: 360k freed
[    1.549937] Write protecting the kernel read-only data: 3156k
[    1.654747] fuse init (API version 7.11)
[    1.844933] usbcore: registered new interface driver usbfs
[    1.844972] usbcore: registered new interface driver hub
[    1.845002] usbcore: registered new device driver usb
[    1.846677] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.846714] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.846735] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    1.846791] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[    1.846834] ohci_hcd 0000:00:13.0: irq 17, io mem 0xdbfee000
[    1.850527] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.850530] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    1.895443] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.895476] r8169 0000:05:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.895508] r8169 0000:05:0b.0: no PCI Express capability
[    1.895813] eth0: RTL8110s at 0xffffc20000064c00, 00:4f:63:00:a4:73, XID 04000000 IRQ 19
[    1.899405] usb usb1: configuration #1 chosen from 1 choice
[    1.899442] hub 1-0:1.0: USB hub found
[    1.899453] hub 1-0:1.0: 3 ports detected
[    1.899594] ehci_hcd 0000:00:13.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    1.899608] ehci_hcd 0000:00:13.3: EHCI Host Controller
[    1.899635] ehci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 2
[    1.920276] ehci_hcd 0000:00:13.3: debug port 1
[    1.920318] ehci_hcd 0000:00:13.3: irq 23, io mem 0xdbfef800
[    1.926304] ehci_hcd 0000:00:13.3: USB 2.0 started, EHCI 1.00
[    1.926418] usb usb2: configuration #1 chosen from 1 choice
[    1.926453] hub 2-0:1.0: USB hub found
[    1.926464] hub 2-0:1.0: 8 ports detected
[    1.926615] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[    1.926639] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    1.926668] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[    1.926710] ohci_hcd 0000:00:13.1: irq 18, io mem 0xdbfed000
[    1.930038] ehci_hcd 0000:05:0c.3: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.930063] ehci_hcd 0000:05:0c.3: EHCI Host Controller
[    1.930109] ehci_hcd 0000:05:0c.3: new USB bus registered, assigned bus number 4
[    1.941667] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.941703] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    1.941743] sd 4:0:1:0: Attached scsi generic sg2 type 0
[    1.941774] scsi 5:0:0:0: Attached scsi generic sg3 type 5
[    1.950287] ehci_hcd 0000:05:0c.3: debug port 1
[    1.950329] ehci_hcd 0000:05:0c.3: irq 20, io mem 0xdeffd800
[    1.956279] ehci_hcd 0000:05:0c.3: USB 2.0 started, EHCI 1.00
[    1.956399] usb usb4: configuration #1 chosen from 1 choice
[    1.956436] hub 4-0:1.0: USB hub found
[    1.956446] hub 4-0:1.0: 6 ports detected
[    1.969386] Driver 'sr' needs updating - please use bus_type methods
[    1.972383] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    1.972388] Uniform CD-ROM driver Revision: 3.20
[    1.972503] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    1.979378] usb usb3: configuration #1 chosen from 1 choice
[    1.979411] hub 3-0:1.0: USB hub found
[    1.979423] hub 3-0:1.0: 3 ports detected
[    1.979542] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    1.979564] ohci_hcd 0000:00:13.2: OHCI Host Controller
[    1.979595] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 5
[    1.979636] ohci_hcd 0000:00:13.2: irq 19, io mem 0xdbfec000
[    2.032415] usb usb5: configuration #1 chosen from 1 choice
[    2.032454] hub 5-0:1.0: USB hub found
[    2.032465] hub 5-0:1.0: 3 ports detected
[    2.032596] ohci_hcd 0000:05:0c.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    2.032622] ohci_hcd 0000:05:0c.0: OHCI Host Controller
[    2.032650] ohci_hcd 0000:05:0c.0: new USB bus registered, assigned bus number 6
[    2.032676] ohci_hcd 0000:05:0c.0: irq 21, io mem 0xdeffc000
[    2.085373] usb usb6: configuration #1 chosen from 1 choice
[    2.085413] hub 6-0:1.0: USB hub found
[    2.085425] hub 6-0:1.0: 2 ports detected
[    2.085561] ohci_hcd 0000:05:0c.1: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    2.085586] ohci_hcd 0000:05:0c.1: OHCI Host Controller
[    2.085615] ohci_hcd 0000:05:0c.1: new USB bus registered, assigned bus number 7
[    2.085661] ohci_hcd 0000:05:0c.1: irq 22, io mem 0xdeff3000
[    2.138377] usb usb7: configuration #1 chosen from 1 choice
[    2.138412] hub 7-0:1.0: USB hub found
[    2.138424] hub 7-0:1.0: 2 ports detected
[    2.138560] ohci_hcd 0000:05:0c.2: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    2.138587] ohci_hcd 0000:05:0c.2: OHCI Host Controller
[    2.138616] ohci_hcd 0000:05:0c.2: new USB bus registered, assigned bus number 8
[    2.138641] ohci_hcd 0000:05:0c.2: irq 23, io mem 0xdeff2000
[    2.191455] usb usb8: configuration #1 chosen from 1 choice
[    2.191490] hub 8-0:1.0: USB hub found
[    2.191502] hub 8-0:1.0: 2 ports detected
[    2.394276] usb 1-2: new low speed USB device using ohci_hcd and address 2
[    2.456553] kjournald starting.  Commit interval 5 seconds
[    2.456563] EXT3-fs: mounted filesystem with writeback data mode.
[    2.540415] usb 1-2: configuration #1 chosen from 1 choice
[    2.652272] usb 4-6: new high speed USB device using ehci_hcd and address 2
[    2.768739] usb 4-6: configuration #1 chosen from 1 choice
[    7.230839] udev: starting version 141
[    7.455690] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    7.455699] ACPI: Power Button [PWRF]
[    7.455794] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    7.455798] ACPI: Power Button [PWRB]
[    7.514350] ACPI: duty_cycle spans bit 4
[    7.514403] processor ACPI_CPU:00: registered as cooling_device0
[    7.514453] processor ACPI_CPU:01: registered as cooling_device1
[    7.673642] parport_pc 00:05: reported by Plug and Play ACPI
[    7.673696] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[    7.725688] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
[    7.725724] uli526x 0000:00:12.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    7.751681] eth1: ULi M5263 at pci0000:00:12.0, 00:13:8f:b3:14:a4, irq 20.
[    7.782478] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    7.782601] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    7.987380] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x8904
[    7.987404] usbcore: registered new interface driver usblp
[    8.137922] usbcore: registered new interface driver hiddev
[    8.143629] input: KYE NetScroll+ Traveler as /devices/pci0000:00/0000:00:13.0/usb1/1-2/1-2:1.0/input/input3
[    8.143703] generic-usb 0003:0458:002E.0001: input,hidraw0: USB HID v1.10 Mouse [KYE NetScroll+ Traveler] on usb-0000:00:13.0-2/input0
[    8.143727] usbcore: registered new interface driver usbhid
[    8.143731] usbhid: v2.6:USB HID core driver
[    8.166231] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[    8.243343] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    8.302310] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    8.423495] ali1535_smbus 0000:00:15.1: ALI1535_smb region uninitialized - upgrade BIOS?
[    8.423499] ali1535_smbus 0000:00:15.1: ALI1535 not detected, module not inserted.
[    8.460417] ali15x3_smbus 0000:00:15.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
[    8.460422] ali15x3_smbus 0000:00:15.1: ALI15X3 not detected, module not inserted.
[    8.715124] nvidia: module license 'NVIDIA' taints kernel.
[    8.715129] Disabling lock debugging due to kernel taint
[    8.770329] cfg80211: Calling CRDA to update world regulatory domain
[    8.900408] cfg80211: World regulatory domain updated:
[    8.900413] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    8.900416] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.900419] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    8.900422] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    8.900425] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.900428] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.961417] HDA Intel 0000:00:14.0: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    8.990841] rt2500pci 0000:05:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    9.018168] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[    9.055995] nvidia 0000:01:00.0: PCI INT A -> GSI 25 (level, low) -> IRQ 25
[    9.056005] nvidia 0000:01:00.0: setting latency timer to 64
[    9.056592] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  185.18.31  Tue Jul 28 17:52:27 PDT 2009
[    9.158078] phy0: Selected rate control algorithm 'minstrel'
[    9.158438] Registered led device: rt2500pci-phy0::radio
[    9.158459] Registered led device: rt2500pci-phy0::quality
[    9.272189] lp0: using parport0 (interrupt-driven).
[    9.303038] w83627ehf: Found W83627EHG chip at 0x290
[    9.513034] Adding 1020116k swap on /dev/sdc2.  Priority:1 extents:1 across:1020116k 
[   10.055334] EXT3 FS on sda3, internal journal
[   10.969296] kjournald starting.  Commit interval 5 seconds
[   10.969602] EXT3 FS on sda2, internal journal
[   10.969607] EXT3-fs: mounted filesystem with writeback data mode.
[   11.002078] JFS: nTxBlock = 8192, nTxLock = 65536
[   11.202868] EXT4-fs: barriers enabled
[   11.203072] kjournald2 starting: pid 2589, dev sdb6:8, commit interval 5 seconds
[   11.203265] EXT4 FS on sdb6, internal journal on sdb6:8
[   11.203268] EXT4-fs: delayed allocation enabled
[   11.203270] EXT4-fs: file extents enabled
[   11.241457] EXT4-fs: mballoc enabled
[   11.241475] EXT4-fs: mounted filesystem sdb6 with ordered data mode
[   11.335074] Btrfs loaded
[   11.350767] device label btrfs devid 1 transid 1010 /dev/sdc1
[   12.235460] ip_tables: (C) 2000-2006 Netfilter Core Team
[   12.890156] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   12.891117] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[   12.891121] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
[   12.891124] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[   13.772240] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (2 cpu cores) (version 2.20.00)
[   13.772317] powernow-k8:    0 : fid 0xc (2000 MHz), vid 0xa
[   13.772321] powernow-k8:    1 : fid 0xa (1800 MHz), vid 0xc
[   13.772324] powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12
[   15.016217] NET: Registered protocol family 10
[   15.016964] lo: Disabled Privacy Extensions
[   15.500022] Clocksource tsc unstable (delta = -86440539 ns)
[   15.871867] virbr0: starting userspace STP failed, starting kernel STP
[   18.994570] Bluetooth: Core ver 2.15
[   18.996485] NET: Registered protocol family 31
[   18.996492] Bluetooth: HCI device and connection manager initialized
[   18.996499] Bluetooth: HCI socket layer initialized
[   19.011652] Bluetooth: L2CAP ver 2.13
[   19.011658] Bluetooth: L2CAP socket layer initialized
[   19.030709] Bluetooth: RFCOMM socket layer initialized
[   19.030728] Bluetooth: RFCOMM TTY layer initialized
[   19.030732] Bluetooth: RFCOMM ver 1.11
[   24.945703] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   24.957057] r8169: eth0: link down
[   24.957089] r8169: eth0: link down
[   24.958578] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   24.980298] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   25.028221] NET: Registered protocol family 17
[   26.070022] virbr0: no IPv6 routers present
[   27.943725] uli526x: eth1 NIC Link is Down
[  203.046491] wlan0: authenticate with AP 00:80:5a:31:90:db
[  203.047719] wlan0: authenticated
[  203.047724] wlan0: associate with AP 00:80:5a:31:90:db
[  203.050813] wlan0: RX AssocResp from 00:80:5a:31:90:db (capab=0x471 status=0 aid=1)
[  203.050820] wlan0: associated
[  203.052920] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  213.286258] wlan0: no IPv6 routers present


 
> 			Linus
> 

> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/