From: Kevin Hilman <khilman@baylibre.com>
To: Neil Armstrong <narmstrong@baylibre.com>, balbi@kernel.org
Cc: Neil Armstrong <narmstrong@baylibre.com>,
linux-usb@vger.kernel.org, linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Dongjin Kim <tobetter@gmail.com>,
Jianxin Pan <jianxin.pan@amlogic.com>, Tim <elatllat@gmail.com>
Subject: Re: [PATCH v4 3/3] arm64: dts: g12-common: add parkmode_disable_ss_quirk on DWC3 controller
Date: Sat, 29 Feb 2020 18:31:27 +0100 [thread overview]
Message-ID: <7hwo859u6o.fsf@baylibre.com> (raw)
In-Reply-To: <20200221091532.8142-4-narmstrong@baylibre.com>
Neil Armstrong <narmstrong@baylibre.com> writes:
> When high load on the DWC3 SuperSpeed port, the controller crashes with:
> [ 221.141621] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
> [ 221.157631] xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
> [ 221.157635] xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead
> [ 221.159901] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
> [ 221.159961] hub 2-1.1:1.0: hub_ext_port_status failed (err = -22)
> [ 221.160076] xhci-hcd xhci-hcd.0.auto: HC died; cleaning up
> [ 221.165946] usb 2-1.1-port1: cannot reset (err = -22)
>
> Setting the parkmode_disable_ss_quirk quirk fixes the issue.
>
> CC: Dongjin Kim <tobetter@gmail.com>
> Cc: Jianxin Pan <jianxin.pan@amlogic.com>
> Reported-by: Tim <elatllat@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
With the bindings reviewed/acked, I'll queue this DT patch for v5.7.
The binding and driver patches will need to go via the USB tree.
Kevin
WARNING: multiple messages have this Message-ID (diff)
From: Kevin Hilman <khilman@baylibre.com>
To: Neil Armstrong <narmstrong@baylibre.com>, balbi@kernel.org
Cc: Jianxin Pan <jianxin.pan@amlogic.com>,
Neil Armstrong <narmstrong@baylibre.com>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
Tim <elatllat@gmail.com>, Dongjin Kim <tobetter@gmail.com>,
linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v4 3/3] arm64: dts: g12-common: add parkmode_disable_ss_quirk on DWC3 controller
Date: Sat, 29 Feb 2020 18:31:27 +0100 [thread overview]
Message-ID: <7hwo859u6o.fsf@baylibre.com> (raw)
In-Reply-To: <20200221091532.8142-4-narmstrong@baylibre.com>
Neil Armstrong <narmstrong@baylibre.com> writes:
> When high load on the DWC3 SuperSpeed port, the controller crashes with:
> [ 221.141621] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
> [ 221.157631] xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
> [ 221.157635] xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead
> [ 221.159901] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
> [ 221.159961] hub 2-1.1:1.0: hub_ext_port_status failed (err = -22)
> [ 221.160076] xhci-hcd xhci-hcd.0.auto: HC died; cleaning up
> [ 221.165946] usb 2-1.1-port1: cannot reset (err = -22)
>
> Setting the parkmode_disable_ss_quirk quirk fixes the issue.
>
> CC: Dongjin Kim <tobetter@gmail.com>
> Cc: Jianxin Pan <jianxin.pan@amlogic.com>
> Reported-by: Tim <elatllat@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
With the bindings reviewed/acked, I'll queue this DT patch for v5.7.
The binding and driver patches will need to go via the USB tree.
Kevin
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Kevin Hilman <khilman@baylibre.com>
To: Neil Armstrong <narmstrong@baylibre.com>, balbi@kernel.org
Cc: Jianxin Pan <jianxin.pan@amlogic.com>,
Neil Armstrong <narmstrong@baylibre.com>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
Tim <elatllat@gmail.com>, Dongjin Kim <tobetter@gmail.com>,
linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v4 3/3] arm64: dts: g12-common: add parkmode_disable_ss_quirk on DWC3 controller
Date: Sat, 29 Feb 2020 18:31:27 +0100 [thread overview]
Message-ID: <7hwo859u6o.fsf@baylibre.com> (raw)
In-Reply-To: <20200221091532.8142-4-narmstrong@baylibre.com>
Neil Armstrong <narmstrong@baylibre.com> writes:
> When high load on the DWC3 SuperSpeed port, the controller crashes with:
> [ 221.141621] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
> [ 221.157631] xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
> [ 221.157635] xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead
> [ 221.159901] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
> [ 221.159961] hub 2-1.1:1.0: hub_ext_port_status failed (err = -22)
> [ 221.160076] xhci-hcd xhci-hcd.0.auto: HC died; cleaning up
> [ 221.165946] usb 2-1.1-port1: cannot reset (err = -22)
>
> Setting the parkmode_disable_ss_quirk quirk fixes the issue.
>
> CC: Dongjin Kim <tobetter@gmail.com>
> Cc: Jianxin Pan <jianxin.pan@amlogic.com>
> Reported-by: Tim <elatllat@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
With the bindings reviewed/acked, I'll queue this DT patch for v5.7.
The binding and driver patches will need to go via the USB tree.
Kevin
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2020-02-29 17:31 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-21 9:15 [PATCH v4 0/3] usb: dwc3: parkmode_disable_ss_quirk on DWC3 controller Neil Armstrong
2020-02-21 9:15 ` Neil Armstrong
2020-02-21 9:15 ` Neil Armstrong
2020-02-21 9:15 ` [PATCH v4 1/3] doc: dt: bindings: usb: dwc3: Update entries for disabling SS instances in park mode Neil Armstrong
2020-02-21 9:15 ` Neil Armstrong
2020-02-21 9:15 ` Neil Armstrong
2020-02-21 9:15 ` [PATCH v4 2/3] usb: dwc3: core: add support " Neil Armstrong
2020-02-21 9:15 ` Neil Armstrong
2020-02-21 9:15 ` Neil Armstrong
2020-02-21 9:15 ` [PATCH v4 3/3] arm64: dts: g12-common: add parkmode_disable_ss_quirk on DWC3 controller Neil Armstrong
2020-02-21 9:15 ` Neil Armstrong
2020-02-21 9:15 ` Neil Armstrong
2020-02-29 17:31 ` Kevin Hilman [this message]
2020-02-29 17:31 ` Kevin Hilman
2020-02-29 17:31 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7hwo859u6o.fsf@baylibre.com \
--to=khilman@baylibre.com \
--cc=balbi@kernel.org \
--cc=elatllat@gmail.com \
--cc=jianxin.pan@amlogic.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=narmstrong@baylibre.com \
--cc=tobetter@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.