* [RFC PATCH] unpack-trees: add the dry_run flag to unpack_trees_options
@ 2011-05-24 21:07 Jens Lehmann
2011-05-24 23:18 ` Junio C Hamano
0 siblings, 1 reply; 7+ messages in thread
From: Jens Lehmann @ 2011-05-24 21:07 UTC (permalink / raw)
To: Git Mailing List; +Cc: Junio C Hamano
Until now there was no way to test if unpack_trees() with update=1 would
succeed without really updating the work tree. The reason for that is that
setting update to 0 does skip the tests for new files and deactivates the
sparse handling, thereby making that unsuitable as a dry run.
Add the new dry_run flag to struct unpack_trees_options unpack_trees().
Setting that together with the update flag will check if the work tree
update would be successful without doing it for real.
The only class of problems that is not detected at the moment are file
system conditions like ENOSPC or missing permissions. Also the index
entries of updated files are not as they would be after a real checkout
because lstat() isn't run as the files aren't updated for real.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
---
AFAICS this patch enables the user to achieve a dry run by calling
unpack_trees() with both update and dry_run set.
My "Teach read-tree the -n|--dry-run option" adapted to this new flag
runs all tests successfully ...
unpack-trees.c | 4 ++--
unpack-trees.h | 3 ++-
2 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/unpack-trees.c b/unpack-trees.c
index 500ebcf..e26a710 100644
--- a/unpack-trees.c
+++ b/unpack-trees.c
@@ -203,7 +203,7 @@ static int check_updates(struct unpack_trees_options *o)
if (ce->ce_flags & CE_WT_REMOVE) {
display_progress(progress, ++cnt);
- if (o->update)
+ if (o->update && !o->dry_run)
unlink_entry(ce);
continue;
}
@@ -217,7 +217,7 @@ static int check_updates(struct unpack_trees_options *o)
if (ce->ce_flags & CE_UPDATE) {
display_progress(progress, ++cnt);
ce->ce_flags &= ~CE_UPDATE;
- if (o->update) {
+ if (o->update && !o->dry_run) {
errs |= checkout_entry(ce, &state, NULL);
}
}
diff --git a/unpack-trees.h b/unpack-trees.h
index cd11a08..64f02cb 100644
--- a/unpack-trees.h
+++ b/unpack-trees.h
@@ -46,7 +46,8 @@ struct unpack_trees_options {
debug_unpack,
skip_sparse_checkout,
gently,
- show_all_errors;
+ show_all_errors,
+ dry_run;
const char *prefix;
int cache_bottom;
struct dir_struct *dir;
--
1.7.5.1.340.g7f395.dirty
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [RFC PATCH] unpack-trees: add the dry_run flag to unpack_trees_options
2011-05-24 21:07 [RFC PATCH] unpack-trees: add the dry_run flag to unpack_trees_options Jens Lehmann
@ 2011-05-24 23:18 ` Junio C Hamano
2011-05-25 20:06 ` [PATCH v2 0/2] Teach read-tree the -n|--dry-run option Jens Lehmann
0 siblings, 1 reply; 7+ messages in thread
From: Junio C Hamano @ 2011-05-24 23:18 UTC (permalink / raw)
To: Jens Lehmann; +Cc: Git Mailing List
Jens Lehmann <Jens.Lehmann@web.de> writes:
> Until now there was no way to test if unpack_trees() with update=1 would
> succeed without really updating the work tree. The reason for that is that
> setting update to 0 does skip the tests for new files and deactivates the
> sparse handling, thereby making that unsuitable as a dry run.
>
> Add the new dry_run flag to struct unpack_trees_options unpack_trees().
> Setting that together with the update flag will check if the work tree
> update would be successful without doing it for real.
>
> The only class of problems that is not detected at the moment are file
> system conditions like ENOSPC or missing permissions. Also the index
> entries of updated files are not as they would be after a real checkout
> because lstat() isn't run as the files aren't updated for real.
>
> Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
> ---
A very sane and clear description. Good.
> AFAICS this patch enables the user to achieve a dry run by calling
> unpack_trees() with both update and dry_run set.
>
> My "Teach read-tree the -n|--dry-run option" adapted to this new flag
> runs all tests successfully ...
>
>
> unpack-trees.c | 4 ++--
> unpack-trees.h | 3 ++-
> 2 files changed, 4 insertions(+), 3 deletions(-)
But on which change does this come?
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v2 0/2] Teach read-tree the -n|--dry-run option
2011-05-24 23:18 ` Junio C Hamano
@ 2011-05-25 20:06 ` Jens Lehmann
2011-05-25 20:07 ` [PATCH v2 1/2] unpack-trees: add the dry_run flag to unpack_trees_options Jens Lehmann
2011-05-25 20:10 ` [PATCH v2 2/2] Teach read-tree the -n|--dry-run option Jens Lehmann
0 siblings, 2 replies; 7+ messages in thread
From: Jens Lehmann @ 2011-05-25 20:06 UTC (permalink / raw)
To: Junio C Hamano; +Cc: Git Mailing List
Am 25.05.2011 01:18, schrieb Junio C Hamano:
> Jens Lehmann <Jens.Lehmann@web.de> writes:
>> My "Teach read-tree the -n|--dry-run option" adapted to this new flag
>> runs all tests successfully ...
>>
>>
>> unpack-trees.c | 4 ++--
>> unpack-trees.h | 3 ++-
>> 2 files changed, 4 insertions(+), 3 deletions(-)
>
> But on which change does this come?
As a preparing step for "read-tree the -n|--dry-run" (and adding
a dry-run option to other users of unpack_trees() should be pretty
straightforward now too).
The first patch in this series enables unpack_trees() to do a dry-run.
That enables users of unpack_trees() to see if running this function
with the update flag set would succeed.
The second patch uses this new dry_run flag to teach read-tree the
-n|--dry-run option.
Jens Lehmann (2):
unpack-trees: add the dry_run flag to unpack_trees_options
Teach read-tree the -n|--dry-run option
Documentation/git-read-tree.txt | 5 ++
builtin/read-tree.c | 3 +-
t/lib-read-tree.sh | 43 ++++++++++++++++++
t/t1000-read-tree-m-3way.sh | 81 +++++++++++++++++-----------------
t/t1001-read-tree-m-2way.sh | 45 ++++++++++---------
t/t1002-read-tree-m-u-2way.sh | 81 +++++++++++++++++-----------------
t/t1004-read-tree-m-u-wf.sh | 23 +++++-----
t/t1005-read-tree-reset.sh | 13 +++---
t/t1008-read-tree-overlay.sh | 3 +-
t/t1011-read-tree-sparse-checkout.sh | 27 ++++++-----
t/t1012-read-tree-df.sh | 9 ++--
t/t1020-subdirectory.sh | 5 +-
unpack-trees.c | 4 +-
unpack-trees.h | 3 +-
14 files changed, 202 insertions(+), 143 deletions(-)
create mode 100644 t/lib-read-tree.sh
--
1.7.5.2.355.gdceb0
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v2 1/2] unpack-trees: add the dry_run flag to unpack_trees_options
2011-05-25 20:06 ` [PATCH v2 0/2] Teach read-tree the -n|--dry-run option Jens Lehmann
@ 2011-05-25 20:07 ` Jens Lehmann
2011-05-25 21:36 ` Junio C Hamano
2011-05-25 20:10 ` [PATCH v2 2/2] Teach read-tree the -n|--dry-run option Jens Lehmann
1 sibling, 1 reply; 7+ messages in thread
From: Jens Lehmann @ 2011-05-25 20:07 UTC (permalink / raw)
To: Junio C Hamano; +Cc: Git Mailing List
Until now there was no way to test if unpack_trees() with update=1 would
succeed without really updating the work tree. The reason for that is that
setting update to 0 does skip the tests for new files and deactivates the
sparse handling, thereby making that unsuitable as a dry run.
Add the new dry_run flag to struct unpack_trees_options unpack_trees().
Setting that together with the update flag will check if the work tree
update would be successful without doing it for real.
The only class of problems that is not detected at the moment are file
system conditions like ENOSPC or missing permissions. Also the index
entries of updated files are not as they would be after a real checkout
because lstat() isn't run as the files aren't updated for real.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
---
unpack-trees.c | 4 ++--
unpack-trees.h | 3 ++-
2 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/unpack-trees.c b/unpack-trees.c
index 0bc4b2d..07f8364 100644
--- a/unpack-trees.c
+++ b/unpack-trees.c
@@ -203,7 +203,7 @@ static int check_updates(struct unpack_trees_options *o)
if (ce->ce_flags & CE_WT_REMOVE) {
display_progress(progress, ++cnt);
- if (o->update)
+ if (o->update && !o->dry_run)
unlink_entry(ce);
continue;
}
@@ -217,7 +217,7 @@ static int check_updates(struct unpack_trees_options *o)
if (ce->ce_flags & CE_UPDATE) {
display_progress(progress, ++cnt);
ce->ce_flags &= ~CE_UPDATE;
- if (o->update) {
+ if (o->update && !o->dry_run) {
errs |= checkout_entry(ce, &state, NULL);
}
}
diff --git a/unpack-trees.h b/unpack-trees.h
index cd11a08..64f02cb 100644
--- a/unpack-trees.h
+++ b/unpack-trees.h
@@ -46,7 +46,8 @@ struct unpack_trees_options {
debug_unpack,
skip_sparse_checkout,
gently,
- show_all_errors;
+ show_all_errors,
+ dry_run;
const char *prefix;
int cache_bottom;
struct dir_struct *dir;
--
1.7.5.2.355.gdceb0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v2 2/2] Teach read-tree the -n|--dry-run option
2011-05-25 20:06 ` [PATCH v2 0/2] Teach read-tree the -n|--dry-run option Jens Lehmann
2011-05-25 20:07 ` [PATCH v2 1/2] unpack-trees: add the dry_run flag to unpack_trees_options Jens Lehmann
@ 2011-05-25 20:10 ` Jens Lehmann
2011-05-25 22:30 ` Junio C Hamano
1 sibling, 1 reply; 7+ messages in thread
From: Jens Lehmann @ 2011-05-25 20:10 UTC (permalink / raw)
To: Junio C Hamano; +Cc: Git Mailing List
Using this option tells read-tree to not update the index. That makes it
possible to check if updating the index would be successful without
changing anything. Using this option will silently ignore -u but still
test if updating the work tree would succeed.
The relevant tests in the t10?? range were extended to do a read-tree -n
before the real read-tree to make sure neither the index nor any local
files were changed with -n and the same exit code as without -n is
returned. The helper functions added for that purpose reside in the new
t/lib-read-tree.sh file.
The only exception is #13 in t1004 ("unlinking an un-unlink-able
symlink"). As this is an issue of wrong directory permissions it is not
detected with -n.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
---
Documentation/git-read-tree.txt | 5 ++
builtin/read-tree.c | 3 +-
t/lib-read-tree.sh | 43 ++++++++++++++++++
t/t1000-read-tree-m-3way.sh | 81 +++++++++++++++++-----------------
t/t1001-read-tree-m-2way.sh | 45 ++++++++++---------
t/t1002-read-tree-m-u-2way.sh | 81 +++++++++++++++++-----------------
t/t1004-read-tree-m-u-wf.sh | 23 +++++-----
t/t1005-read-tree-reset.sh | 13 +++---
t/t1008-read-tree-overlay.sh | 3 +-
t/t1011-read-tree-sparse-checkout.sh | 27 ++++++-----
t/t1012-read-tree-df.sh | 9 ++--
t/t1020-subdirectory.sh | 5 +-
12 files changed, 198 insertions(+), 140 deletions(-)
create mode 100644 t/lib-read-tree.sh
diff --git a/Documentation/git-read-tree.txt b/Documentation/git-read-tree.txt
index 26fdadc..46a96f2 100644
--- a/Documentation/git-read-tree.txt
+++ b/Documentation/git-read-tree.txt
@@ -53,6 +53,11 @@ OPTIONS
trees that are not directly related to the current
working tree status into a temporary index file.
+-n::
+--dry-run::
+ Check if the command would error out, without updating the index
+ nor the files in the working tree for real.
+
-v::
Show the progress of checking files out.
diff --git a/builtin/read-tree.c b/builtin/read-tree.c
index 93c9281..df6c4c8 100644
--- a/builtin/read-tree.c
+++ b/builtin/read-tree.c
@@ -130,6 +130,7 @@ int cmd_read_tree(int argc, const char **argv, const char *unused_prefix)
PARSE_OPT_NONEG, exclude_per_directory_cb },
OPT_SET_INT('i', NULL, &opts.index_only,
"don't check the working tree after merging", 1),
+ OPT__DRY_RUN(&opts.dry_run, "don't update the index or the work tree"),
OPT_SET_INT(0, "no-sparse-checkout", &opts.skip_sparse_checkout,
"skip applying sparse checkout filter", 1),
OPT_SET_INT(0, "debug-unpack", &opts.debug_unpack,
@@ -219,7 +220,7 @@ int cmd_read_tree(int argc, const char **argv, const char *unused_prefix)
if (unpack_trees(nr_trees, t, &opts))
return 128;
- if (opts.debug_unpack)
+ if (opts.debug_unpack || opts.dry_run)
return 0; /* do not write the index out */
/*
diff --git a/t/lib-read-tree.sh b/t/lib-read-tree.sh
new file mode 100644
index 0000000..435d19c
--- /dev/null
+++ b/t/lib-read-tree.sh
@@ -0,0 +1,43 @@
+#!/bin/sh
+#
+# Helper functions to check if read-tree would succeed/fail as expected with
+# and without the dry-run option. They also test that the dry-run does not
+# write the index and that together with -u it doesn't touch the work tree.
+#
+read_tree_must_succeed () {
+ git ls-files -s >pre-dry-run &&
+ git read-tree -n "$@" &&
+ git ls-files -s >post-dry-run &&
+ test_cmp pre-dry-run post-dry-run &&
+ git read-tree "$@"
+}
+
+read_tree_must_fail () {
+ git ls-files -s >pre-dry-run &&
+ test_must_fail git read-tree -n "$@" &&
+ git ls-files -s >post-dry-run &&
+ test_cmp pre-dry-run post-dry-run &&
+ test_must_fail git read-tree "$@"
+}
+
+read_tree_u_must_succeed () {
+ git ls-files -s >pre-dry-run &&
+ git diff-files >pre-dry-run-wt &&
+ git read-tree -n "$@" &&
+ git ls-files -s >post-dry-run &&
+ git diff-files >post-dry-run-wt &&
+ test_cmp pre-dry-run post-dry-run &&
+ test_cmp pre-dry-run-wt post-dry-run-wt &&
+ git read-tree "$@"
+}
+
+read_tree_u_must_fail () {
+ git ls-files -s >pre-dry-run &&
+ git diff-files >pre-dry-run-wt &&
+ test_must_fail git read-tree -n "$@" &&
+ git ls-files -s >post-dry-run &&
+ git diff-files >post-dry-run-wt &&
+ test_cmp pre-dry-run post-dry-run &&
+ test_cmp pre-dry-run-wt post-dry-run-wt &&
+ test_must_fail git read-tree "$@"
+}
diff --git a/t/t1000-read-tree-m-3way.sh b/t/t1000-read-tree-m-3way.sh
index ca8a409..babcdd2 100755
--- a/t/t1000-read-tree-m-3way.sh
+++ b/t/t1000-read-tree-m-3way.sh
@@ -72,6 +72,7 @@ In addition:
'
. ./test-lib.sh
+. "$TEST_DIRECTORY"/lib-read-tree.sh
. "$TEST_DIRECTORY"/lib-read-tree-m-3way.sh
################################################################
@@ -137,7 +138,7 @@ test_expect_success \
'3-way merge with git read-tree -m, empty cache' \
"rm -fr [NDMALTS][NDMALTSF] Z &&
rm .git/index &&
- git read-tree -m $tree_O $tree_A $tree_B &&
+ read_tree_must_succeed -m $tree_O $tree_A $tree_B &&
check_result"
# This starts out with the first head, which is the normal
@@ -146,9 +147,9 @@ test_expect_success \
'3-way merge with git read-tree -m, match H' \
"rm -fr [NDMALTS][NDMALTSF] Z &&
rm .git/index &&
- git read-tree $tree_A &&
+ read_tree_must_succeed $tree_A &&
git checkout-index -f -u -a &&
- git read-tree -m $tree_O $tree_A $tree_B &&
+ read_tree_must_succeed -m $tree_O $tree_A $tree_B &&
check_result"
: <<\END_OF_CASE_TABLE
@@ -211,7 +212,7 @@ test_expect_success '1 - must not have an entry not in A.' "
rm -f .git/index XX &&
echo XX >XX &&
git update-index --add XX &&
- test_must_fail git read-tree -m $tree_O $tree_A $tree_B
+ read_tree_must_fail -m $tree_O $tree_A $tree_B
"
test_expect_success \
@@ -219,7 +220,7 @@ test_expect_success \
"rm -f .git/index NA &&
cp .orig-B/NA NA &&
git update-index --add NA &&
- git read-tree -m $tree_O $tree_A $tree_B"
+ read_tree_must_succeed -m $tree_O $tree_A $tree_B"
test_expect_success \
'2 - matching B alone is OK in !O && !A && B case.' \
@@ -227,14 +228,14 @@ test_expect_success \
cp .orig-B/NA NA &&
git update-index --add NA &&
echo extra >>NA &&
- git read-tree -m $tree_O $tree_A $tree_B"
+ read_tree_must_succeed -m $tree_O $tree_A $tree_B"
test_expect_success \
'3 - must match A in !O && A && !B case.' \
"rm -f .git/index AN &&
cp .orig-A/AN AN &&
git update-index --add AN &&
- git read-tree -m $tree_O $tree_A $tree_B &&
+ read_tree_must_succeed -m $tree_O $tree_A $tree_B &&
check_result"
test_expect_success \
@@ -243,7 +244,7 @@ test_expect_success \
cp .orig-A/AN AN &&
git update-index --add AN &&
echo extra >>AN &&
- git read-tree -m $tree_O $tree_A $tree_B"
+ read_tree_must_succeed -m $tree_O $tree_A $tree_B"
test_expect_success \
'3 (fail) - must match A in !O && A && !B case.' "
@@ -251,7 +252,7 @@ test_expect_success \
cp .orig-A/AN AN &&
echo extra >>AN &&
git update-index --add AN &&
- test_must_fail git read-tree -m $tree_O $tree_A $tree_B
+ read_tree_must_fail -m $tree_O $tree_A $tree_B
"
test_expect_success \
@@ -259,7 +260,7 @@ test_expect_success \
"rm -f .git/index AA &&
cp .orig-A/AA AA &&
git update-index --add AA &&
- git read-tree -m $tree_O $tree_A $tree_B &&
+ read_tree_must_succeed -m $tree_O $tree_A $tree_B &&
check_result"
test_expect_success \
@@ -268,7 +269,7 @@ test_expect_success \
cp .orig-A/AA AA &&
git update-index --add AA &&
echo extra >>AA &&
- test_must_fail git read-tree -m $tree_O $tree_A $tree_B
+ read_tree_must_fail -m $tree_O $tree_A $tree_B
"
test_expect_success \
@@ -277,7 +278,7 @@ test_expect_success \
cp .orig-A/AA AA &&
echo extra >>AA &&
git update-index --add AA &&
- test_must_fail git read-tree -m $tree_O $tree_A $tree_B
+ read_tree_must_fail -m $tree_O $tree_A $tree_B
"
test_expect_success \
@@ -285,7 +286,7 @@ test_expect_success \
"rm -f .git/index LL &&
cp .orig-A/LL LL &&
git update-index --add LL &&
- git read-tree -m $tree_O $tree_A $tree_B &&
+ read_tree_must_succeed -m $tree_O $tree_A $tree_B &&
check_result"
test_expect_success \
@@ -294,7 +295,7 @@ test_expect_success \
cp .orig-A/LL LL &&
git update-index --add LL &&
echo extra >>LL &&
- git read-tree -m $tree_O $tree_A $tree_B &&
+ read_tree_must_succeed -m $tree_O $tree_A $tree_B &&
check_result"
test_expect_success \
@@ -303,7 +304,7 @@ test_expect_success \
cp .orig-A/LL LL &&
echo extra >>LL &&
git update-index --add LL &&
- test_must_fail git read-tree -m $tree_O $tree_A $tree_B
+ read_tree_must_fail -m $tree_O $tree_A $tree_B
"
test_expect_success \
@@ -311,7 +312,7 @@ test_expect_success \
rm -f .git/index DD &&
echo DD >DD &&
git update-index --add DD &&
- test_must_fail git read-tree -m $tree_O $tree_A $tree_B
+ read_tree_must_fail -m $tree_O $tree_A $tree_B
"
test_expect_success \
@@ -319,7 +320,7 @@ test_expect_success \
rm -f .git/index DM &&
cp .orig-B/DM DM &&
git update-index --add DM &&
- test_must_fail git read-tree -m $tree_O $tree_A $tree_B
+ read_tree_must_fail -m $tree_O $tree_A $tree_B
"
test_expect_success \
@@ -327,7 +328,7 @@ test_expect_success \
rm -f .git/index DN &&
cp .orig-B/DN DN &&
git update-index --add DN &&
- test_must_fail git read-tree -m $tree_O $tree_A $tree_B
+ read_tree_must_fail -m $tree_O $tree_A $tree_B
"
test_expect_success \
@@ -335,7 +336,7 @@ test_expect_success \
"rm -f .git/index MD &&
cp .orig-A/MD MD &&
git update-index --add MD &&
- git read-tree -m $tree_O $tree_A $tree_B &&
+ read_tree_must_succeed -m $tree_O $tree_A $tree_B &&
check_result"
test_expect_success \
@@ -344,7 +345,7 @@ test_expect_success \
cp .orig-A/MD MD &&
git update-index --add MD &&
echo extra >>MD &&
- test_must_fail git read-tree -m $tree_O $tree_A $tree_B
+ read_tree_must_fail -m $tree_O $tree_A $tree_B
"
test_expect_success \
@@ -353,7 +354,7 @@ test_expect_success \
cp .orig-A/MD MD &&
echo extra >>MD &&
git update-index --add MD &&
- test_must_fail git read-tree -m $tree_O $tree_A $tree_B
+ read_tree_must_fail -m $tree_O $tree_A $tree_B
"
test_expect_success \
@@ -361,7 +362,7 @@ test_expect_success \
"rm -f .git/index ND &&
cp .orig-A/ND ND &&
git update-index --add ND &&
- git read-tree -m $tree_O $tree_A $tree_B &&
+ read_tree_must_succeed -m $tree_O $tree_A $tree_B &&
check_result"
test_expect_success \
@@ -370,7 +371,7 @@ test_expect_success \
cp .orig-A/ND ND &&
git update-index --add ND &&
echo extra >>ND &&
- test_must_fail git read-tree -m $tree_O $tree_A $tree_B
+ read_tree_must_fail -m $tree_O $tree_A $tree_B
"
test_expect_success \
@@ -379,7 +380,7 @@ test_expect_success \
cp .orig-A/ND ND &&
echo extra >>ND &&
git update-index --add ND &&
- test_must_fail git read-tree -m $tree_O $tree_A $tree_B
+ read_tree_must_fail -m $tree_O $tree_A $tree_B
"
test_expect_success \
@@ -387,7 +388,7 @@ test_expect_success \
"rm -f .git/index MM &&
cp .orig-A/MM MM &&
git update-index --add MM &&
- git read-tree -m $tree_O $tree_A $tree_B &&
+ read_tree_must_succeed -m $tree_O $tree_A $tree_B &&
check_result"
test_expect_success \
@@ -396,7 +397,7 @@ test_expect_success \
cp .orig-A/MM MM &&
git update-index --add MM &&
echo extra >>MM &&
- test_must_fail git read-tree -m $tree_O $tree_A $tree_B
+ read_tree_must_fail -m $tree_O $tree_A $tree_B
"
test_expect_success \
@@ -405,7 +406,7 @@ test_expect_success \
cp .orig-A/MM MM &&
echo extra >>MM &&
git update-index --add MM &&
- test_must_fail git read-tree -m $tree_O $tree_A $tree_B
+ read_tree_must_fail -m $tree_O $tree_A $tree_B
"
test_expect_success \
@@ -413,7 +414,7 @@ test_expect_success \
"rm -f .git/index SS &&
cp .orig-A/SS SS &&
git update-index --add SS &&
- git read-tree -m $tree_O $tree_A $tree_B &&
+ read_tree_must_succeed -m $tree_O $tree_A $tree_B &&
check_result"
test_expect_success \
@@ -422,7 +423,7 @@ test_expect_success \
cp .orig-A/SS SS &&
git update-index --add SS &&
echo extra >>SS &&
- git read-tree -m $tree_O $tree_A $tree_B &&
+ read_tree_must_succeed -m $tree_O $tree_A $tree_B &&
check_result"
test_expect_success \
@@ -431,7 +432,7 @@ test_expect_success \
cp .orig-A/SS SS &&
echo extra >>SS &&
git update-index --add SS &&
- test_must_fail git read-tree -m $tree_O $tree_A $tree_B
+ read_tree_must_fail -m $tree_O $tree_A $tree_B
"
test_expect_success \
@@ -439,7 +440,7 @@ test_expect_success \
"rm -f .git/index MN &&
cp .orig-A/MN MN &&
git update-index --add MN &&
- git read-tree -m $tree_O $tree_A $tree_B &&
+ read_tree_must_succeed -m $tree_O $tree_A $tree_B &&
check_result"
test_expect_success \
@@ -448,7 +449,7 @@ test_expect_success \
cp .orig-A/MN MN &&
git update-index --add MN &&
echo extra >>MN &&
- git read-tree -m $tree_O $tree_A $tree_B &&
+ read_tree_must_succeed -m $tree_O $tree_A $tree_B &&
check_result"
test_expect_success \
@@ -456,7 +457,7 @@ test_expect_success \
"rm -f .git/index NM &&
cp .orig-A/NM NM &&
git update-index --add NM &&
- git read-tree -m $tree_O $tree_A $tree_B &&
+ read_tree_must_succeed -m $tree_O $tree_A $tree_B &&
check_result"
test_expect_success \
@@ -465,7 +466,7 @@ test_expect_success \
cp .orig-B/NM NM &&
git update-index --add NM &&
echo extra >>NM &&
- git read-tree -m $tree_O $tree_A $tree_B &&
+ read_tree_must_succeed -m $tree_O $tree_A $tree_B &&
check_result"
test_expect_success \
@@ -474,7 +475,7 @@ test_expect_success \
cp .orig-A/NM NM &&
git update-index --add NM &&
echo extra >>NM &&
- test_must_fail git read-tree -m $tree_O $tree_A $tree_B
+ read_tree_must_fail -m $tree_O $tree_A $tree_B
"
test_expect_success \
@@ -483,7 +484,7 @@ test_expect_success \
cp .orig-A/NM NM &&
echo extra >>NM &&
git update-index --add NM &&
- test_must_fail git read-tree -m $tree_O $tree_A $tree_B
+ read_tree_must_fail -m $tree_O $tree_A $tree_B
"
test_expect_success \
@@ -491,7 +492,7 @@ test_expect_success \
"rm -f .git/index NN &&
cp .orig-A/NN NN &&
git update-index --add NN &&
- git read-tree -m $tree_O $tree_A $tree_B &&
+ read_tree_must_succeed -m $tree_O $tree_A $tree_B &&
check_result"
test_expect_success \
@@ -500,7 +501,7 @@ test_expect_success \
cp .orig-A/NN NN &&
git update-index --add NN &&
echo extra >>NN &&
- git read-tree -m $tree_O $tree_A $tree_B &&
+ read_tree_must_succeed -m $tree_O $tree_A $tree_B &&
check_result"
test_expect_success \
@@ -509,7 +510,7 @@ test_expect_success \
cp .orig-A/NN NN &&
echo extra >>NN &&
git update-index --add NN &&
- test_must_fail git read-tree -m $tree_O $tree_A $tree_B
+ read_tree_must_fail -m $tree_O $tree_A $tree_B
"
# #16
@@ -522,7 +523,7 @@ test_expect_success \
echo E16 >F16 &&
git update-index F16 &&
tree1=`git write-tree` &&
- git read-tree -m $tree0 $tree1 $tree1 $tree0 &&
+ read_tree_must_succeed -m $tree0 $tree1 $tree1 $tree0 &&
git ls-files --stage'
test_done
diff --git a/t/t1001-read-tree-m-2way.sh b/t/t1001-read-tree-m-2way.sh
index 680d992..acaab07 100755
--- a/t/t1001-read-tree-m-2way.sh
+++ b/t/t1001-read-tree-m-2way.sh
@@ -21,6 +21,7 @@ In the test, these paths are used:
yomin - not in H nor M
'
. ./test-lib.sh
+. "$TEST_DIRECTORY"/lib-read-tree.sh
read_tree_twoway () {
git read-tree -m "$1" "$2" && git ls-files --stage
@@ -94,7 +95,7 @@ echo '+100644 X 0 yomin' >expected
test_expect_success \
'4 - carry forward local addition.' \
'rm -f .git/index &&
- git read-tree $treeH &&
+ read_tree_must_succeed $treeH &&
git checkout-index -u -f -q -a &&
git update-index --add yomin &&
read_tree_twoway $treeH $treeM &&
@@ -106,7 +107,7 @@ test_expect_success \
test_expect_success \
'5 - carry forward local addition.' \
'rm -f .git/index &&
- git read-tree $treeH &&
+ read_tree_must_succeed $treeH &&
git checkout-index -u -f -q -a &&
echo yomin >yomin &&
git update-index --add yomin &&
@@ -120,7 +121,7 @@ test_expect_success \
test_expect_success \
'6 - local addition already has the same.' \
'rm -f .git/index &&
- git read-tree $treeH &&
+ read_tree_must_succeed $treeH &&
git checkout-index -u -f -q -a &&
git update-index --add frotz &&
read_tree_twoway $treeH $treeM &&
@@ -131,7 +132,7 @@ test_expect_success \
test_expect_success \
'7 - local addition already has the same.' \
'rm -f .git/index &&
- git read-tree $treeH &&
+ read_tree_must_succeed $treeH &&
git checkout-index -u -f -q -a &&
echo frotz >frotz &&
git update-index --add frotz &&
@@ -144,7 +145,7 @@ test_expect_success \
test_expect_success \
'8 - conflicting addition.' \
'rm -f .git/index &&
- git read-tree $treeH &&
+ read_tree_must_succeed $treeH &&
git checkout-index -u -f -q -a &&
echo frotz frotz >frotz &&
git update-index --add frotz &&
@@ -153,7 +154,7 @@ test_expect_success \
test_expect_success \
'9 - conflicting addition.' \
'rm -f .git/index &&
- git read-tree $treeH &&
+ read_tree_must_succeed $treeH &&
git checkout-index -u -f -q -a &&
echo frotz frotz >frotz &&
git update-index --add frotz &&
@@ -163,7 +164,7 @@ test_expect_success \
test_expect_success \
'10 - path removed.' \
'rm -f .git/index &&
- git read-tree $treeH &&
+ read_tree_must_succeed $treeH &&
git checkout-index -u -f -q -a &&
echo rezrov >rezrov &&
git update-index --add rezrov &&
@@ -174,7 +175,7 @@ test_expect_success \
test_expect_success \
'11 - dirty path removed.' \
'rm -f .git/index &&
- git read-tree $treeH &&
+ read_tree_must_succeed $treeH &&
git checkout-index -u -f -q -a &&
echo rezrov >rezrov &&
git update-index --add rezrov &&
@@ -184,7 +185,7 @@ test_expect_success \
test_expect_success \
'12 - unmatching local changes being removed.' \
'rm -f .git/index &&
- git read-tree $treeH &&
+ read_tree_must_succeed $treeH &&
git checkout-index -u -f -q -a &&
echo rezrov rezrov >rezrov &&
git update-index --add rezrov &&
@@ -193,7 +194,7 @@ test_expect_success \
test_expect_success \
'13 - unmatching local changes being removed.' \
'rm -f .git/index &&
- git read-tree $treeH &&
+ read_tree_must_succeed $treeH &&
git checkout-index -u -f -q -a &&
echo rezrov rezrov >rezrov &&
git update-index --add rezrov &&
@@ -208,7 +209,7 @@ EOF
test_expect_success \
'14 - unchanged in two heads.' \
'rm -f .git/index &&
- git read-tree $treeH &&
+ read_tree_must_succeed $treeH &&
git checkout-index -u -f -q -a &&
echo nitfol nitfol >nitfol &&
git update-index --add nitfol &&
@@ -221,7 +222,7 @@ test_expect_success \
test_expect_success \
'15 - unchanged in two heads.' \
'rm -f .git/index &&
- git read-tree $treeH &&
+ read_tree_must_succeed $treeH &&
git checkout-index -u -f -q -a &&
echo nitfol nitfol >nitfol &&
git update-index --add nitfol &&
@@ -235,7 +236,7 @@ test_expect_success \
test_expect_success \
'16 - conflicting local change.' \
'rm -f .git/index &&
- git read-tree $treeH &&
+ read_tree_must_succeed $treeH &&
git checkout-index -u -f -q -a &&
echo bozbar bozbar >bozbar &&
git update-index --add bozbar &&
@@ -244,7 +245,7 @@ test_expect_success \
test_expect_success \
'17 - conflicting local change.' \
'rm -f .git/index &&
- git read-tree $treeH &&
+ read_tree_must_succeed $treeH &&
git checkout-index -u -f -q -a &&
echo bozbar bozbar >bozbar &&
git update-index --add bozbar &&
@@ -254,7 +255,7 @@ test_expect_success \
test_expect_success \
'18 - local change already having a good result.' \
'rm -f .git/index &&
- git read-tree $treeH &&
+ read_tree_must_succeed $treeH &&
git checkout-index -u -f -q -a &&
cat bozbar-new >bozbar &&
git update-index --add bozbar &&
@@ -266,7 +267,7 @@ test_expect_success \
test_expect_success \
'19 - local change already having a good result, further modified.' \
'rm -f .git/index &&
- git read-tree $treeH &&
+ read_tree_must_succeed $treeH &&
git checkout-index -u -f -q -a &&
cat bozbar-new >bozbar &&
git update-index --add bozbar &&
@@ -279,7 +280,7 @@ test_expect_success \
test_expect_success \
'20 - no local change, use new tree.' \
'rm -f .git/index &&
- git read-tree $treeH &&
+ read_tree_must_succeed $treeH &&
git checkout-index -u -f -q -a &&
cat bozbar-old >bozbar &&
git update-index --add bozbar &&
@@ -291,7 +292,7 @@ test_expect_success \
test_expect_success \
'21 - no local change, dirty cache.' \
'rm -f .git/index &&
- git read-tree $treeH &&
+ read_tree_must_succeed $treeH &&
git checkout-index -u -f -q -a &&
cat bozbar-old >bozbar &&
git update-index --add bozbar &&
@@ -302,7 +303,7 @@ test_expect_success \
test_expect_success \
'22 - local change cache updated.' \
'rm -f .git/index &&
- git read-tree $treeH &&
+ read_tree_must_succeed $treeH &&
git checkout-index -u -f -q -a &&
sed -e "s/such as/SUCH AS/" bozbar-old >bozbar &&
git update-index --add bozbar &&
@@ -359,7 +360,7 @@ test_expect_success \
test_expect_success \
'a/b (untracked) vs a, plus c/d case test.' \
- 'test_must_fail git read-tree -u -m "$treeH" "$treeM" &&
+ 'read_tree_u_must_fail -u -m "$treeH" "$treeM" &&
git ls-files --stage &&
test -f a/b'
@@ -386,7 +387,7 @@ test_expect_success \
test_expect_success \
'a/b vs a, plus c/d case test.' \
- 'git read-tree -u -m "$treeH" "$treeM" &&
+ 'read_tree_u_must_succeed -u -m "$treeH" "$treeM" &&
git ls-files --stage | tee >treeMcheck.out &&
test_cmp treeM.out treeMcheck.out'
@@ -401,7 +402,7 @@ test_expect_success '-m references the correct modified tree' '
echo a >file-a &&
git add file-a &&
git ls-tree $(git write-tree) file-a >expect &&
- git read-tree -m HEAD initial-mod &&
+ read_tree_must_succeed -m HEAD initial-mod &&
git ls-tree $(git write-tree) file-a >actual &&
test_cmp expect actual
'
diff --git a/t/t1002-read-tree-m-u-2way.sh b/t/t1002-read-tree-m-u-2way.sh
index a4a17e0..a847709 100755
--- a/t/t1002-read-tree-m-u-2way.sh
+++ b/t/t1002-read-tree-m-u-2way.sh
@@ -9,6 +9,7 @@ This is identical to t1001, but uses -u to update the work tree as well.
'
. ./test-lib.sh
+. "$TEST_DIRECTORY"/lib-read-tree.sh
compare_change () {
sed >current \
@@ -56,8 +57,8 @@ test_expect_success \
test_expect_success \
'1, 2, 3 - no carry forward' \
'rm -f .git/index nitfol bozbar rezrov frotz &&
- git read-tree --reset -u $treeH &&
- git read-tree -m -u $treeH $treeM &&
+ read_tree_u_must_succeed --reset -u $treeH &&
+ read_tree_u_must_succeed -m -u $treeH $treeM &&
git ls-files --stage >1-3.out &&
cmp M.out 1-3.out &&
sum bozbar frotz nitfol >actual3.sum &&
@@ -69,11 +70,11 @@ test_expect_success \
test_expect_success \
'4 - carry forward local addition.' \
'rm -f .git/index nitfol bozbar rezrov frotz &&
- git read-tree --reset -u $treeH &&
+ read_tree_u_must_succeed --reset -u $treeH &&
echo "+100644 X 0 yomin" >expected &&
echo yomin >yomin &&
git update-index --add yomin &&
- git read-tree -m -u $treeH $treeM &&
+ read_tree_u_must_succeed -m -u $treeH $treeM &&
git ls-files --stage >4.out || return 1
git diff -U0 --no-index M.out 4.out >4diff.out
compare_change 4diff.out expected &&
@@ -87,12 +88,12 @@ test_expect_success \
test_expect_success \
'5 - carry forward local addition.' \
'rm -f .git/index nitfol bozbar rezrov frotz &&
- git read-tree --reset -u $treeH &&
- git read-tree -m -u $treeH &&
+ read_tree_u_must_succeed --reset -u $treeH &&
+ read_tree_u_must_succeed -m -u $treeH &&
echo yomin >yomin &&
git update-index --add yomin &&
echo yomin yomin >yomin &&
- git read-tree -m -u $treeH $treeM &&
+ read_tree_u_must_succeed -m -u $treeH $treeM &&
git ls-files --stage >5.out || return 1
git diff -U0 --no-index M.out 5.out >5diff.out
compare_change 5diff.out expected &&
@@ -107,10 +108,10 @@ test_expect_success \
test_expect_success \
'6 - local addition already has the same.' \
'rm -f .git/index nitfol bozbar rezrov frotz &&
- git read-tree --reset -u $treeH &&
+ read_tree_u_must_succeed --reset -u $treeH &&
echo frotz >frotz &&
git update-index --add frotz &&
- git read-tree -m -u $treeH $treeM &&
+ read_tree_u_must_succeed -m -u $treeH $treeM &&
git ls-files --stage >6.out &&
test_cmp M.out 6.out &&
check_cache_at frotz clean &&
@@ -123,11 +124,11 @@ test_expect_success \
test_expect_success \
'7 - local addition already has the same.' \
'rm -f .git/index nitfol bozbar rezrov frotz &&
- git read-tree --reset -u $treeH &&
+ read_tree_u_must_succeed --reset -u $treeH &&
echo frotz >frotz &&
git update-index --add frotz &&
echo frotz frotz >frotz &&
- git read-tree -m -u $treeH $treeM &&
+ read_tree_u_must_succeed -m -u $treeH $treeM &&
git ls-files --stage >7.out &&
test_cmp M.out 7.out &&
check_cache_at frotz dirty &&
@@ -141,27 +142,27 @@ test_expect_success \
test_expect_success \
'8 - conflicting addition.' \
'rm -f .git/index nitfol bozbar rezrov frotz &&
- git read-tree --reset -u $treeH &&
+ read_tree_u_must_succeed --reset -u $treeH &&
echo frotz frotz >frotz &&
git update-index --add frotz &&
- if git read-tree -m -u $treeH $treeM; then false; else :; fi'
+ if read_tree_u_must_succeed -m -u $treeH $treeM; then false; else :; fi'
test_expect_success \
'9 - conflicting addition.' \
'rm -f .git/index nitfol bozbar rezrov frotz &&
- git read-tree --reset -u $treeH &&
+ read_tree_u_must_succeed --reset -u $treeH &&
echo frotz frotz >frotz &&
git update-index --add frotz &&
echo frotz >frotz &&
- if git read-tree -m -u $treeH $treeM; then false; else :; fi'
+ if read_tree_u_must_succeed -m -u $treeH $treeM; then false; else :; fi'
test_expect_success \
'10 - path removed.' \
'rm -f .git/index nitfol bozbar rezrov frotz &&
- git read-tree --reset -u $treeH &&
+ read_tree_u_must_succeed --reset -u $treeH &&
echo rezrov >rezrov &&
git update-index --add rezrov &&
- git read-tree -m -u $treeH $treeM &&
+ read_tree_u_must_succeed -m -u $treeH $treeM &&
git ls-files --stage >10.out &&
cmp M.out 10.out &&
sum bozbar frotz nitfol >actual10.sum &&
@@ -170,28 +171,28 @@ test_expect_success \
test_expect_success \
'11 - dirty path removed.' \
'rm -f .git/index nitfol bozbar rezrov frotz &&
- git read-tree --reset -u $treeH &&
+ read_tree_u_must_succeed --reset -u $treeH &&
echo rezrov >rezrov &&
git update-index --add rezrov &&
echo rezrov rezrov >rezrov &&
- if git read-tree -m -u $treeH $treeM; then false; else :; fi'
+ if read_tree_u_must_succeed -m -u $treeH $treeM; then false; else :; fi'
test_expect_success \
'12 - unmatching local changes being removed.' \
'rm -f .git/index nitfol bozbar rezrov frotz &&
- git read-tree --reset -u $treeH &&
+ read_tree_u_must_succeed --reset -u $treeH &&
echo rezrov rezrov >rezrov &&
git update-index --add rezrov &&
- if git read-tree -m -u $treeH $treeM; then false; else :; fi'
+ if read_tree_u_must_succeed -m -u $treeH $treeM; then false; else :; fi'
test_expect_success \
'13 - unmatching local changes being removed.' \
'rm -f .git/index nitfol bozbar rezrov frotz &&
- git read-tree --reset -u $treeH &&
+ read_tree_u_must_succeed --reset -u $treeH &&
echo rezrov rezrov >rezrov &&
git update-index --add rezrov &&
echo rezrov >rezrov &&
- if git read-tree -m -u $treeH $treeM; then false; else :; fi'
+ if read_tree_u_must_succeed -m -u $treeH $treeM; then false; else :; fi'
cat >expected <<EOF
-100644 X 0 nitfol
@@ -201,10 +202,10 @@ EOF
test_expect_success \
'14 - unchanged in two heads.' \
'rm -f .git/index nitfol bozbar rezrov frotz &&
- git read-tree --reset -u $treeH &&
+ read_tree_u_must_succeed --reset -u $treeH &&
echo nitfol nitfol >nitfol &&
git update-index --add nitfol &&
- git read-tree -m -u $treeH $treeM &&
+ read_tree_u_must_succeed -m -u $treeH $treeM &&
git ls-files --stage >14.out &&
test_must_fail git diff -U0 --no-index M.out 14.out >14diff.out &&
compare_change 14diff.out expected &&
@@ -221,11 +222,11 @@ test_expect_success \
test_expect_success \
'15 - unchanged in two heads.' \
'rm -f .git/index nitfol bozbar rezrov frotz &&
- git read-tree --reset -u $treeH &&
+ read_tree_u_must_succeed --reset -u $treeH &&
echo nitfol nitfol >nitfol &&
git update-index --add nitfol &&
echo nitfol nitfol nitfol >nitfol &&
- git read-tree -m -u $treeH $treeM &&
+ read_tree_u_must_succeed -m -u $treeH $treeM &&
git ls-files --stage >15.out &&
test_must_fail git diff -U0 --no-index M.out 15.out >15diff.out &&
compare_change 15diff.out expected &&
@@ -242,27 +243,27 @@ test_expect_success \
test_expect_success \
'16 - conflicting local change.' \
'rm -f .git/index nitfol bozbar rezrov frotz &&
- git read-tree --reset -u $treeH &&
+ read_tree_u_must_succeed --reset -u $treeH &&
echo bozbar bozbar >bozbar &&
git update-index --add bozbar &&
- if git read-tree -m -u $treeH $treeM; then false; else :; fi'
+ if read_tree_u_must_succeed -m -u $treeH $treeM; then false; else :; fi'
test_expect_success \
'17 - conflicting local change.' \
'rm -f .git/index nitfol bozbar rezrov frotz &&
- git read-tree --reset -u $treeH &&
+ read_tree_u_must_succeed --reset -u $treeH &&
echo bozbar bozbar >bozbar &&
git update-index --add bozbar &&
echo bozbar bozbar bozbar >bozbar &&
- if git read-tree -m -u $treeH $treeM; then false; else :; fi'
+ if read_tree_u_must_succeed -m -u $treeH $treeM; then false; else :; fi'
test_expect_success \
'18 - local change already having a good result.' \
'rm -f .git/index nitfol bozbar rezrov frotz &&
- git read-tree --reset -u $treeH &&
+ read_tree_u_must_succeed --reset -u $treeH &&
echo gnusto >bozbar &&
git update-index --add bozbar &&
- git read-tree -m -u $treeH $treeM &&
+ read_tree_u_must_succeed -m -u $treeH $treeM &&
git ls-files --stage >18.out &&
test_cmp M.out 18.out &&
check_cache_at bozbar clean &&
@@ -272,11 +273,11 @@ test_expect_success \
test_expect_success \
'19 - local change already having a good result, further modified.' \
'rm -f .git/index nitfol bozbar rezrov frotz &&
- git read-tree --reset -u $treeH &&
+ read_tree_u_must_succeed --reset -u $treeH &&
echo gnusto >bozbar &&
git update-index --add bozbar &&
echo gnusto gnusto >bozbar &&
- git read-tree -m -u $treeH $treeM &&
+ read_tree_u_must_succeed -m -u $treeH $treeM &&
git ls-files --stage >19.out &&
test_cmp M.out 19.out &&
check_cache_at bozbar dirty &&
@@ -292,10 +293,10 @@ test_expect_success \
test_expect_success \
'20 - no local change, use new tree.' \
'rm -f .git/index nitfol bozbar rezrov frotz &&
- git read-tree --reset -u $treeH &&
+ read_tree_u_must_succeed --reset -u $treeH &&
echo bozbar >bozbar &&
git update-index --add bozbar &&
- git read-tree -m -u $treeH $treeM &&
+ read_tree_u_must_succeed -m -u $treeH $treeM &&
git ls-files --stage >20.out &&
test_cmp M.out 20.out &&
check_cache_at bozbar clean &&
@@ -305,11 +306,11 @@ test_expect_success \
test_expect_success \
'21 - no local change, dirty cache.' \
'rm -f .git/index nitfol bozbar rezrov frotz &&
- git read-tree --reset -u $treeH &&
+ read_tree_u_must_succeed --reset -u $treeH &&
echo bozbar >bozbar &&
git update-index --add bozbar &&
echo gnusto gnusto >bozbar &&
- if git read-tree -m -u $treeH $treeM; then false; else :; fi'
+ if read_tree_u_must_succeed -m -u $treeH $treeM; then false; else :; fi'
# Also make sure we did not break DF vs DF/DF case.
test_expect_success \
@@ -336,7 +337,7 @@ test_expect_success \
rm -fr DF &&
echo DF >DF &&
git update-index --add DF &&
- git read-tree -m -u $treeDF $treeDFDF &&
+ read_tree_u_must_succeed -m -u $treeDF $treeDFDF &&
git ls-files --stage >DFDFcheck.out &&
test_cmp DFDF.out DFDFcheck.out &&
check_cache_at DF/DF clean'
diff --git a/t/t1004-read-tree-m-u-wf.sh b/t/t1004-read-tree-m-u-wf.sh
index eb8e3d4..b3ae7d5 100755
--- a/t/t1004-read-tree-m-u-wf.sh
+++ b/t/t1004-read-tree-m-u-wf.sh
@@ -3,6 +3,7 @@
test_description='read-tree -m -u checks working tree files'
. ./test-lib.sh
+. "$TEST_DIRECTORY"/lib-read-tree.sh
# two-tree test
@@ -29,7 +30,7 @@ test_expect_success 'two-way not clobbering' '
echo >file2 master creates untracked file2 &&
echo >subdir/file2 master creates untracked subdir/file2 &&
- if err=`git read-tree -m -u master side 2>&1`
+ if err=`read_tree_u_must_succeed -m -u master side 2>&1`
then
echo should have complained
false
@@ -42,7 +43,7 @@ echo file2 >.gitignore
test_expect_success 'two-way with incorrect --exclude-per-directory (1)' '
- if err=`git read-tree -m --exclude-per-directory=.gitignore master side 2>&1`
+ if err=`read_tree_u_must_succeed -m --exclude-per-directory=.gitignore master side 2>&1`
then
echo should have complained
false
@@ -53,7 +54,7 @@ test_expect_success 'two-way with incorrect --exclude-per-directory (1)' '
test_expect_success 'two-way with incorrect --exclude-per-directory (2)' '
- if err=`git read-tree -m -u --exclude-per-directory=foo --exclude-per-directory=.gitignore master side 2>&1`
+ if err=`read_tree_u_must_succeed -m -u --exclude-per-directory=foo --exclude-per-directory=.gitignore master side 2>&1`
then
echo should have complained
false
@@ -64,7 +65,7 @@ test_expect_success 'two-way with incorrect --exclude-per-directory (2)' '
test_expect_success 'two-way clobbering a ignored file' '
- git read-tree -m -u --exclude-per-directory=.gitignore master side
+ read_tree_u_must_succeed -m -u --exclude-per-directory=.gitignore master side
'
rm -f .gitignore
@@ -84,7 +85,7 @@ test_expect_success 'three-way not complaining on an untracked path in both' '
echo >file2 file two is untracked on the master side &&
echo >subdir/file2 file two is untracked on the master side &&
- git read-tree -m -u branch-point master side
+ read_tree_u_must_succeed -m -u branch-point master side
'
test_expect_success 'three-way not clobbering a working tree file' '
@@ -94,7 +95,7 @@ test_expect_success 'three-way not clobbering a working tree file' '
git checkout master &&
echo >file3 file three created in master, untracked &&
echo >subdir/file3 file three created in master, untracked &&
- if err=`git read-tree -m -u branch-point master side 2>&1`
+ if err=`read_tree_u_must_succeed -m -u branch-point master side 2>&1`
then
echo should have complained
false
@@ -113,7 +114,7 @@ test_expect_success 'three-way not complaining on an untracked file' '
echo >file3 file three created in master, untracked &&
echo >subdir/file3 file three created in master, untracked &&
- git read-tree -m -u --exclude-per-directory=.gitignore branch-point master side
+ read_tree_u_must_succeed -m -u --exclude-per-directory=.gitignore branch-point master side
'
test_expect_success '3-way not overwriting local changes (setup)' '
@@ -137,7 +138,7 @@ test_expect_success '3-way not overwriting local changes (our side)' '
git reset --hard &&
echo >>file1 "local changes" &&
- git read-tree -m -u branch-point side-a side-b &&
+ read_tree_u_must_succeed -m -u branch-point side-a side-b &&
grep "new line to be kept" file1 &&
grep "local changes" file1
@@ -151,7 +152,7 @@ test_expect_success '3-way not overwriting local changes (their side)' '
git reset --hard &&
echo >>file2 "local changes" &&
- test_must_fail git read-tree -m -u branch-point side-a side-b &&
+ read_tree_u_must_fail -m -u branch-point side-a side-b &&
! grep "new line to be kept" file2 &&
grep "local changes" file2
@@ -173,7 +174,7 @@ test_expect_success SYMLINKS 'funny symlink in work tree' '
git add a/b &&
git commit -m "we add a/b" &&
- git read-tree -m -u sym-a sym-a sym-b
+ read_tree_u_must_succeed -m -u sym-a sym-a sym-b
'
@@ -209,7 +210,7 @@ test_expect_success 'D/F setup' '
test_expect_success 'D/F' '
git checkout side-b &&
- git read-tree -m -u branch-point side-b side-a &&
+ read_tree_u_must_succeed -m -u branch-point side-b side-a &&
git ls-files -u >actual &&
(
a=$(git rev-parse branch-point:subdir/file2)
diff --git a/t/t1005-read-tree-reset.sh b/t/t1005-read-tree-reset.sh
index 8499116..f53de79 100755
--- a/t/t1005-read-tree-reset.sh
+++ b/t/t1005-read-tree-reset.sh
@@ -3,6 +3,7 @@
test_description='read-tree -u --reset'
. ./test-lib.sh
+. "$TEST_DIRECTORY"/lib-read-tree.sh
# two-tree test
@@ -22,13 +23,13 @@ test_expect_success 'setup' '
'
test_expect_success 'reset should work' '
- git read-tree -u --reset HEAD^ &&
+ read_tree_u_must_succeed -u --reset HEAD^ &&
git ls-files >actual &&
test_cmp expect actual
'
test_expect_success 'reset should remove remnants from a failed merge' '
- git read-tree --reset -u HEAD &&
+ read_tree_u_must_succeed --reset -u HEAD &&
git ls-files -s >expect &&
sha1=$(git rev-parse :new) &&
(
@@ -37,13 +38,13 @@ test_expect_success 'reset should remove remnants from a failed merge' '
) | git update-index --index-info &&
>old &&
git ls-files -s &&
- git read-tree --reset -u HEAD &&
+ read_tree_u_must_succeed --reset -u HEAD &&
git ls-files -s >actual &&
! test -f old
'
test_expect_success 'Porcelain reset should remove remnants too' '
- git read-tree --reset -u HEAD &&
+ read_tree_u_must_succeed --reset -u HEAD &&
git ls-files -s >expect &&
sha1=$(git rev-parse :new) &&
(
@@ -58,7 +59,7 @@ test_expect_success 'Porcelain reset should remove remnants too' '
'
test_expect_success 'Porcelain checkout -f should remove remnants too' '
- git read-tree --reset -u HEAD &&
+ read_tree_u_must_succeed --reset -u HEAD &&
git ls-files -s >expect &&
sha1=$(git rev-parse :new) &&
(
@@ -73,7 +74,7 @@ test_expect_success 'Porcelain checkout -f should remove remnants too' '
'
test_expect_success 'Porcelain checkout -f HEAD should remove remnants too' '
- git read-tree --reset -u HEAD &&
+ read_tree_u_must_succeed --reset -u HEAD &&
git ls-files -s >expect &&
sha1=$(git rev-parse :new) &&
(
diff --git a/t/t1008-read-tree-overlay.sh b/t/t1008-read-tree-overlay.sh
index f9e0028..4c50ed9 100755
--- a/t/t1008-read-tree-overlay.sh
+++ b/t/t1008-read-tree-overlay.sh
@@ -3,6 +3,7 @@
test_description='test multi-tree read-tree without merging'
. ./test-lib.sh
+. "$TEST_DIRECTORY"/lib-read-tree.sh
test_expect_success setup '
echo one >a &&
@@ -21,7 +22,7 @@ test_expect_success setup '
'
test_expect_success 'multi-read' '
- git read-tree initial master side &&
+ read_tree_must_succeed initial master side &&
(echo a; echo b/c) >expect &&
git ls-files >actual &&
test_cmp expect actual
diff --git a/t/t1011-read-tree-sparse-checkout.sh b/t/t1011-read-tree-sparse-checkout.sh
index 20a50eb..018c354 100755
--- a/t/t1011-read-tree-sparse-checkout.sh
+++ b/t/t1011-read-tree-sparse-checkout.sh
@@ -12,6 +12,7 @@ test_description='sparse checkout tests
'
. ./test-lib.sh
+. "$TEST_DIRECTORY"/lib-read-tree.sh
test_expect_success 'setup' '
cat >expected <<-\EOF &&
@@ -43,7 +44,7 @@ test_expect_success 'setup' '
'
test_expect_success 'read-tree without .git/info/sparse-checkout' '
- git read-tree -m -u HEAD &&
+ read_tree_u_must_succeed -m -u HEAD &&
git ls-files --stage >result &&
test_cmp expected result &&
git ls-files -t >result &&
@@ -52,7 +53,7 @@ test_expect_success 'read-tree without .git/info/sparse-checkout' '
test_expect_success 'read-tree with .git/info/sparse-checkout but disabled' '
echo >.git/info/sparse-checkout &&
- git read-tree -m -u HEAD &&
+ read_tree_u_must_succeed -m -u HEAD &&
git ls-files -t >result &&
test_cmp expected.swt result &&
test -f init.t &&
@@ -62,7 +63,7 @@ test_expect_success 'read-tree with .git/info/sparse-checkout but disabled' '
test_expect_success 'read-tree --no-sparse-checkout with empty .git/info/sparse-checkout and enabled' '
git config core.sparsecheckout true &&
echo >.git/info/sparse-checkout &&
- git read-tree --no-sparse-checkout -m -u HEAD &&
+ read_tree_u_must_succeed --no-sparse-checkout -m -u HEAD &&
git ls-files -t >result &&
test_cmp expected.swt result &&
test -f init.t &&
@@ -72,7 +73,7 @@ test_expect_success 'read-tree --no-sparse-checkout with empty .git/info/sparse-
test_expect_success 'read-tree with empty .git/info/sparse-checkout' '
git config core.sparsecheckout true &&
echo >.git/info/sparse-checkout &&
- test_must_fail git read-tree -m -u HEAD &&
+ read_tree_u_must_fail -m -u HEAD &&
git ls-files --stage >result &&
test_cmp expected result &&
git ls-files -t >result &&
@@ -90,7 +91,7 @@ test_expect_success 'match directories with trailing slash' '
EOF
echo sub/ > .git/info/sparse-checkout &&
- git read-tree -m -u HEAD &&
+ read_tree_u_must_succeed -m -u HEAD &&
git ls-files -t > result &&
test_cmp expected.swt-noinit result &&
test ! -f init.t &&
@@ -99,7 +100,7 @@ test_expect_success 'match directories with trailing slash' '
test_expect_success 'match directories without trailing slash' '
echo sub >.git/info/sparse-checkout &&
- git read-tree -m -u HEAD &&
+ read_tree_u_must_succeed -m -u HEAD &&
git ls-files -t >result &&
test_cmp expected.swt-noinit result &&
test ! -f init.t &&
@@ -149,7 +150,7 @@ EOF
test_expect_success 'match directory pattern' '
echo "s?b" >.git/info/sparse-checkout &&
- git read-tree -m -u HEAD &&
+ read_tree_u_must_succeed -m -u HEAD &&
git ls-files -t >result &&
test_cmp expected.swt-noinit result &&
test ! -f init.t &&
@@ -165,7 +166,7 @@ test_expect_success 'checkout area changes' '
EOF
echo init.t >.git/info/sparse-checkout &&
- git read-tree -m -u HEAD &&
+ read_tree_u_must_succeed -m -u HEAD &&
git ls-files -t >result &&
test_cmp expected.swt-nosub result &&
test -f init.t &&
@@ -175,7 +176,7 @@ test_expect_success 'checkout area changes' '
test_expect_success 'read-tree updates worktree, absent case' '
echo sub/added >.git/info/sparse-checkout &&
git checkout -f top &&
- git read-tree -m -u HEAD^ &&
+ read_tree_u_must_succeed -m -u HEAD^ &&
test ! -f init.t
'
@@ -183,7 +184,7 @@ test_expect_success 'read-tree updates worktree, dirty case' '
echo sub/added >.git/info/sparse-checkout &&
git checkout -f top &&
echo dirty >init.t &&
- git read-tree -m -u HEAD^ &&
+ read_tree_u_must_succeed -m -u HEAD^ &&
grep -q dirty init.t &&
rm init.t
'
@@ -192,14 +193,14 @@ test_expect_success 'read-tree removes worktree, dirty case' '
echo init.t >.git/info/sparse-checkout &&
git checkout -f top &&
echo dirty >added &&
- git read-tree -m -u HEAD^ &&
+ read_tree_u_must_succeed -m -u HEAD^ &&
grep -q dirty added
'
test_expect_success 'read-tree adds to worktree, absent case' '
echo init.t >.git/info/sparse-checkout &&
git checkout -f removed &&
- git read-tree -u -m HEAD^ &&
+ read_tree_u_must_succeed -u -m HEAD^ &&
test ! -f sub/added
'
@@ -208,7 +209,7 @@ test_expect_success 'read-tree adds to worktree, dirty case' '
git checkout -f removed &&
mkdir sub &&
echo dirty >sub/added &&
- git read-tree -u -m HEAD^ &&
+ read_tree_u_must_succeed -u -m HEAD^ &&
grep -q dirty sub/added
'
diff --git a/t/t1012-read-tree-df.sh b/t/t1012-read-tree-df.sh
index 9811d46..a6a04b6 100755
--- a/t/t1012-read-tree-df.sh
+++ b/t/t1012-read-tree-df.sh
@@ -3,6 +3,7 @@
test_description='read-tree D/F conflict corner cases'
. ./test-lib.sh
+. "$TEST_DIRECTORY"/lib-read-tree.sh
maketree () {
(
@@ -53,7 +54,7 @@ test_expect_success setup '
test_expect_success '3-way (1)' '
settree A-000 &&
- git read-tree -m -u O-000 A-000 B-000 &&
+ read_tree_u_must_succeed -m -u O-000 A-000 B-000 &&
checkindex <<-EOF
3 a/b
0 a/b-2/c/d
@@ -65,7 +66,7 @@ test_expect_success '3-way (1)' '
test_expect_success '3-way (2)' '
settree A-001 &&
- git read-tree -m -u O-000 A-001 B-000 &&
+ read_tree_u_must_succeed -m -u O-000 A-001 B-000 &&
checkindex <<-EOF
3 a/b
0 a/b-2/c/d
@@ -78,7 +79,7 @@ test_expect_success '3-way (2)' '
test_expect_success '3-way (3)' '
settree A-010 &&
- git read-tree -m -u O-010 A-010 B-010 &&
+ read_tree_u_must_succeed -m -u O-010 A-010 B-010 &&
checkindex <<-EOF
2 t
1 t-0
@@ -92,7 +93,7 @@ test_expect_success '3-way (3)' '
test_expect_success '2-way (1)' '
settree O-020 &&
- git read-tree -m -u O-020 A-020 &&
+ read_tree_u_must_succeed -m -u O-020 A-020 &&
checkindex <<-EOF
0 ds/dma/ioat/Makefile
0 ds/dma/ioat/registers.h
diff --git a/t/t1020-subdirectory.sh b/t/t1020-subdirectory.sh
index ddc3921..f6a44c9 100755
--- a/t/t1020-subdirectory.sh
+++ b/t/t1020-subdirectory.sh
@@ -7,6 +7,7 @@ test_description='Try various core-level commands in subdirectory.
'
. ./test-lib.sh
+. "$TEST_DIRECTORY"/lib-read-tree.sh
test_expect_success setup '
long="a b c d e f g h i j k l m n o p q r s t u v w x y z" &&
@@ -98,13 +99,13 @@ test_expect_success 'checkout-index' '
test_expect_success 'read-tree' '
rm -f one dir/two &&
tree=`git write-tree` &&
- git read-tree --reset -u "$tree" &&
+ read_tree_u_must_succeed --reset -u "$tree" &&
cmp one original.one &&
cmp dir/two original.two &&
(
cd dir &&
rm -f two &&
- git read-tree --reset -u "$tree" &&
+ read_tree_u_must_succeed --reset -u "$tree" &&
cmp two ../original.two &&
cmp ../one ../original.one
)
--
1.7.5.2.355.gdceb0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v2 1/2] unpack-trees: add the dry_run flag to unpack_trees_options
2011-05-25 20:07 ` [PATCH v2 1/2] unpack-trees: add the dry_run flag to unpack_trees_options Jens Lehmann
@ 2011-05-25 21:36 ` Junio C Hamano
0 siblings, 0 replies; 7+ messages in thread
From: Junio C Hamano @ 2011-05-25 21:36 UTC (permalink / raw)
To: Jens Lehmann; +Cc: Git Mailing List
Jens Lehmann <Jens.Lehmann@web.de> writes:
> Until now there was no way to test if unpack_trees() with update=1 would
> succeed without really updating the work tree. The reason for that is that
> setting update to 0 does skip the tests for new files and deactivates the
> sparse handling, thereby making that unsuitable as a dry run.
>
> Add the new dry_run flag to struct unpack_trees_options unpack_trees().
> Setting that together with the update flag will check if the work tree
> update would be successful without doing it for real.
>
> The only class of problems that is not detected at the moment are file
> system conditions like ENOSPC or missing permissions. Also the index
> entries of updated files are not as they would be after a real checkout
> because lstat() isn't run as the files aren't updated for real.
>
> Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
> ---
Looks good. remove_marked_cache_entries() does not touch the working
tree, and because you are not calling unlink_entry(), you won't trigger
schedule_dir_for_removal() hence remove_scheduled_dirs() won't cause us
any trouble either.
Will queue. Thanks.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2 2/2] Teach read-tree the -n|--dry-run option
2011-05-25 20:10 ` [PATCH v2 2/2] Teach read-tree the -n|--dry-run option Jens Lehmann
@ 2011-05-25 22:30 ` Junio C Hamano
0 siblings, 0 replies; 7+ messages in thread
From: Junio C Hamano @ 2011-05-25 22:30 UTC (permalink / raw)
To: Jens Lehmann; +Cc: Git Mailing List
Jens Lehmann <Jens.Lehmann@web.de> writes:
> Using this option tells read-tree to not update the index. That makes it
> possible to check if updating the index would be successful without
> changing anything. Using this option will silently ignore -u but still
> test if updating the work tree would succeed.
I'll reword the above to de-stress "the index" when I queue this patch, as
this is not about the index anymore. Also I do not think you "silently
ignore" the "-u" option. Don't you check what would happen when "-u" is
given and checking out the merge result would overwrite the file in the
working tree? In that scenario, "-u" actively participates in the dry-run
check you implemented.
> diff --git a/t/lib-read-tree.sh b/t/lib-read-tree.sh
> new file mode 100644
> index 0000000..435d19c
> --- /dev/null
> +++ b/t/lib-read-tree.sh
> @@ -0,0 +1,43 @@
> +#!/bin/sh
> +#
> +# Helper functions to check if read-tree would succeed/fail as expected with
> +# and without the dry-run option. They also test that the dry-run does not
> +# write the index and that together with -u it doesn't touch the work tree.
> +#
> ...
> +read_tree_u_must_succeed () {
> + git ls-files -s >pre-dry-run &&
> + git diff-files >pre-dry-run-wt &&
> + git read-tree -n "$@" &&
> + git ls-files -s >post-dry-run &&
> + git diff-files >post-dry-run-wt &&
> + test_cmp pre-dry-run post-dry-run &&
> + test_cmp pre-dry-run-wt post-dry-run-wt &&
As the RHS of diff-files output that represent the working tree status
indicates "contents indeterminate" with 0{40}, this comparison is the same
as comparing what is in the index before and after the dry-run.
> ...
> +read_tree_u_must_fail () {
> + git ls-files -s >pre-dry-run &&
> + git diff-files >pre-dry-run-wt &&
> + test_must_fail git read-tree -n "$@" &&
> + git ls-files -s >post-dry-run &&
> + git diff-files >post-dry-run-wt &&
> + test_cmp pre-dry-run post-dry-run &&
> + test_cmp pre-dry-run-wt post-dry-run-wt &&
> + test_must_fail git read-tree "$@"
> +}
Same here. A few additions of -p will trivially fix them, though.
diff --git a/t/lib-read-tree.sh b/t/lib-read-tree.sh
index 435d19c..abc2c6f 100644
--- a/t/lib-read-tree.sh
+++ b/t/lib-read-tree.sh
@@ -22,10 +22,10 @@ read_tree_must_fail () {
read_tree_u_must_succeed () {
git ls-files -s >pre-dry-run &&
- git diff-files >pre-dry-run-wt &&
+ git diff-files -p >pre-dry-run-wt &&
git read-tree -n "$@" &&
git ls-files -s >post-dry-run &&
- git diff-files >post-dry-run-wt &&
+ git diff-files -p >post-dry-run-wt &&
test_cmp pre-dry-run post-dry-run &&
test_cmp pre-dry-run-wt post-dry-run-wt &&
git read-tree "$@"
@@ -33,10 +33,10 @@ read_tree_u_must_succeed () {
read_tree_u_must_fail () {
git ls-files -s >pre-dry-run &&
- git diff-files >pre-dry-run-wt &&
+ git diff-files -p >pre-dry-run-wt &&
test_must_fail git read-tree -n "$@" &&
git ls-files -s >post-dry-run &&
- git diff-files >post-dry-run-wt &&
+ git diff-files -p >post-dry-run-wt &&
test_cmp pre-dry-run post-dry-run &&
test_cmp pre-dry-run-wt post-dry-run-wt &&
test_must_fail git read-tree "$@"
^ permalink raw reply related [flat|nested] 7+ messages in thread
end of thread, other threads:[~2011-05-25 22:30 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-05-24 21:07 [RFC PATCH] unpack-trees: add the dry_run flag to unpack_trees_options Jens Lehmann
2011-05-24 23:18 ` Junio C Hamano
2011-05-25 20:06 ` [PATCH v2 0/2] Teach read-tree the -n|--dry-run option Jens Lehmann
2011-05-25 20:07 ` [PATCH v2 1/2] unpack-trees: add the dry_run flag to unpack_trees_options Jens Lehmann
2011-05-25 21:36 ` Junio C Hamano
2011-05-25 20:10 ` [PATCH v2 2/2] Teach read-tree the -n|--dry-run option Jens Lehmann
2011-05-25 22:30 ` Junio C Hamano
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.