All of lore.kernel.org
 help / color / mirror / Atom feed
From: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
To: matti.vaittinen@fi.rohmeurope.com, mazziesaccount@gmail.com
Cc: Lee Jones <lee.jones@linaro.org>,
	Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	linux-kernel@vger.kernel.org, linux-power@fi.rohmeurope.com,
	linux-clk@vger.kernel.org
Subject: [PATCH 02/15] clk: BD718x7: Do not depend on parent driver data
Date: Fri, 8 Jan 2021 15:31:57 +0200	[thread overview]
Message-ID: <831b5fd8f595599b628303c1b678a9c74d73907d.1610110144.git.matti.vaittinen@fi.rohmeurope.com> (raw)
In-Reply-To: <cover.1610110144.git.matti.vaittinen@fi.rohmeurope.com>

The bd718x7 only needs a regmap from parent device. This can be
obtained by call to dev_get_regmap. Do not require parent to
populate the driver data for this.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
---

Please note that this same change has been sent individually:
https://lore.kernel.org/lkml/20210105123028.GA3409663@localhost.localdomain/
It is present in this series only because some patches depend on it.

 drivers/clk/clk-bd718x7.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/clk-bd718x7.c b/drivers/clk/clk-bd718x7.c
index b52e8d6f660c..17d90e09f1c0 100644
--- a/drivers/clk/clk-bd718x7.c
+++ b/drivers/clk/clk-bd718x7.c
@@ -31,12 +31,12 @@ struct bd718xx_clk {
 	u8 reg;
 	u8 mask;
 	struct platform_device *pdev;
-	struct rohm_regmap_dev *mfd;
+	struct regmap *regmap;
 };
 
 static int bd71837_clk_set(struct bd718xx_clk *c, unsigned int status)
 {
-	return regmap_update_bits(c->mfd->regmap, c->reg, c->mask, status);
+	return regmap_update_bits(c->regmap, c->reg, c->mask, status);
 }
 
 static void bd71837_clk_disable(struct clk_hw *hw)
@@ -62,7 +62,7 @@ static int bd71837_clk_is_enabled(struct clk_hw *hw)
 	int rval;
 	struct bd718xx_clk *c = container_of(hw, struct bd718xx_clk, hw);
 
-	rval = regmap_read(c->mfd->regmap, c->reg, &enabled);
+	rval = regmap_read(c->regmap, c->reg, &enabled);
 
 	if (rval)
 		return rval;
@@ -82,7 +82,6 @@ static int bd71837_clk_probe(struct platform_device *pdev)
 	int rval = -ENOMEM;
 	const char *parent_clk;
 	struct device *parent = pdev->dev.parent;
-	struct rohm_regmap_dev *mfd = dev_get_drvdata(parent);
 	struct clk_init_data init = {
 		.name = "bd718xx-32k-out",
 		.ops = &bd71837_clk_ops,
@@ -93,6 +92,10 @@ static int bd71837_clk_probe(struct platform_device *pdev)
 	if (!c)
 		return -ENOMEM;
 
+	c->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!c->regmap)
+		return -ENODEV;
+
 	init.num_parents = 1;
 	parent_clk = of_clk_get_parent_name(parent->of_node, 0);
 
@@ -119,7 +122,6 @@ static int bd71837_clk_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "Unknown clk chip\n");
 		return -EINVAL;
 	}
-	c->mfd = mfd;
 	c->pdev = pdev;
 	c->hw.init = &init;
 
-- 
2.25.4


-- 
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =] 

  parent reply	other threads:[~2021-01-08 13:32 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-08 13:27 [PATCH 00/15] Support ROHM BD71815 PMIC Matti Vaittinen
2021-01-08 13:29 ` [PATCH 01/15] rtc: bd70528: Do not require parent data Matti Vaittinen
2021-01-08 13:31 ` Matti Vaittinen [this message]
2021-01-08 13:32 ` [PATCH 03/15] mfd: bd718x7: simplify by cleaning unnecessary device data Matti Vaittinen
2021-01-08 13:34 ` [PATCH 04/15] dt_bindings: bd71828: Add clock output mode Matti Vaittinen
2021-01-13 13:52   ` Rob Herring
2021-01-13 14:52     ` Matti Vaittinen
2021-01-13 15:52       ` Rob Herring
2021-01-08 13:34 ` [PATCH 05/15] dt_bindings: mfd: Add ROHM BD71815 PMIC Matti Vaittinen
2021-01-11 19:06   ` Rob Herring
2021-01-12  6:14     ` Vaittinen, Matti
2021-01-08 13:36 ` [PATCH 06/15] dt_bindings: regulator: Add ROHM BD71815 PMIC regulators Matti Vaittinen
2021-01-11 19:09   ` Rob Herring
2021-01-12  6:10     ` Matti Vaittinen
2021-01-13 13:53       ` Rob Herring
2021-01-13 14:23         ` Vaittinen, Matti
2021-01-13 15:47           ` Rob Herring
2021-01-08 13:37 ` [PATCH 07/15] mfd: Add ROHM BD71815 ID Matti Vaittinen
2021-01-08 13:37 ` [PATCH 08/15] mfd: Support for ROHM BD71815 PMIC core Matti Vaittinen
2021-01-08 13:39 ` [PATCH 09/15] gpio: support ROHM BD71815 GPOs Matti Vaittinen
2021-01-08 19:28   ` kernel test robot
2021-01-08 19:28     ` kernel test robot
2021-01-09  0:45   ` Linus Walleij
2021-01-11  6:15     ` Vaittinen, Matti
2021-01-11  7:26       ` Vaittinen, Matti
2021-01-08 13:41 ` [PATCH 10/15] regulator: helpers: Export helper voltage listing Matti Vaittinen
2021-01-08 13:42 ` [PATCH 11/15] regulator: rohm-regulator: SNVS dvs and linear voltage support Matti Vaittinen
2021-01-15  8:26   ` Lee Jones
2021-01-15  9:10     ` Vaittinen, Matti
2021-01-15  9:48     ` Matti Vaittinen
2021-01-08 13:43 ` [PATCH 12/15] regulator: Support ROHM BD71815 regulators Matti Vaittinen
2021-01-08 22:30   ` kernel test robot
2021-01-08 22:30     ` kernel test robot
2021-01-08 13:45 ` [PATCH 13/15] clk: bd718x7: Add support for clk gate on ROHM BD71815 PMIC Matti Vaittinen
2021-01-08 13:46 ` [PATCH 14/15] rtc: bd70528: Support RTC on ROHM BD71815 Matti Vaittinen
2021-01-08 13:46 ` [PATCH 15/15] MAINTAINERS: Add ROHM BD71815AGW Matti Vaittinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=831b5fd8f595599b628303c1b678a9c74d73907d.1610110144.git.matti.vaittinen@fi.rohmeurope.com \
    --to=matti.vaittinen@fi.rohmeurope.com \
    --cc=lee.jones@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-power@fi.rohmeurope.com \
    --cc=mazziesaccount@gmail.com \
    --cc=mturquette@baylibre.com \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.