From: Peter Rosin <peda@axentia.se> To: Pantelis Antoniou <pantelis.antoniou@konsulko.com>, Lee Jones <lee.jones@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org>, Alexandre Courbot <gnurou@gmail.com>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Frank Rowand <frowand.list@gmail.com>, Wolfram Sang <wsa@the-dreams.de>, Richard Purdie <rpurdie@rpsys.net>, Jacek Anaszewski <j.anaszewski@samsung.com>, Jean Delvare <jdelvare@suse.com>, Avirup Banerjee <abanerjee@juniper.net>, Georgi Vlaev <gvlaev@juniper.net>, Guenter Roeck <linux@roeck-us.net>, JawaharBalaji Thirumalaisamy <jawaharb@juniper.net>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <linux-gpio@vger.kernel.org>, <linux-i2c@vger.kernel.org>, <linux-leds@vger.kernel.org>, <linux-hwmon@vger.kernel.org> Subject: Re: [PATCH 04/10] i2c: i2c-mux-i2cs: Add device tree bindings Date: Mon, 10 Oct 2016 17:48:51 +0200 [thread overview] Message-ID: <83dc46b5-9c37-2813-0eca-267250e7cf2e@axentia.se> (raw) In-Reply-To: <1475853669-22480-5-git-send-email-pantelis.antoniou@konsulko.com> On 2016-10-07 17:21, Pantelis Antoniou wrote: > From: Georgi Vlaev <gvlaev@juniper.net> > > Add binding document for the i2c mux driver of Juniper's I2CS FPGA. > > Signed-off-by: Georgi Vlaev <gvlaev@juniper.net> > [Ported from Juniper kernel] > Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> > --- > .../devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt | 27 ++++++++++++++++++++++ > 1 file changed, 27 insertions(+) > create mode 100644 Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt > > diff --git a/Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt b/Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt > new file mode 100644 > index 0000000..03d917f > --- /dev/null > +++ b/Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt > @@ -0,0 +1,27 @@ > +* Juniper I2C Mux on I2CS > + > + I2C mux driver for switching the RE access to the FPC i2c bus. > + Compatible with the FPC variant of the I2CS. > + > +Required properties: > + > + - compatible: "jnx,i2cs-mux-i2cs". jnx,i2c-mux-i2cs > + > +The following required properties are defined externally: > + > + - Standard I2C mux properties. See i2c-mux.txt in this directory. To accommodate changes pending for 4.9, change "mux" to "gate" in this line... > + - I2C child bus nodes. See i2c-mux.txt in this directory. This line is wrong since the child nodes themselves are optional in i2c-gate.txt (and i2c-mux.txt). I guess you can just drop it since the child nodes are mentioned in i2c-gate.txt (and i2c-mux.txt). > + > +Example: > + > +fpc0_mux { > + compatible = "jnx,i2c-mux-i2cs"; > + #address-cells = <1>; > + #size-cells = <0>; ...drop these two... > + > + fpc0i2c0: i2c@0 { ...change i2c@0 to i2c-gate... > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; ...and drop reg. Cheers, Peter > + }; > +}; >
WARNING: multiple messages have this Message-ID (diff)
From: Peter Rosin <peda@axentia.se> To: Pantelis Antoniou <pantelis.antoniou@konsulko.com>, Lee Jones <lee.jones@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org>, Alexandre Courbot <gnurou@gmail.com>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Frank Rowand <frowand.list@gmail.com>, Wolfram Sang <wsa@the-dreams.de>, Richard Purdie <rpurdie@rpsys.net>, Jacek Anaszewski <j.anaszewski@samsung.com>, Jean Delvare <jdelvare@suse.com>, Avirup Banerjee <abanerjee@juniper.net>, Georgi Vlaev <gvlaev@juniper.net>, Guenter Roeck <linux@roeck-us.net>, JawaharBalaji Thirumalaisamy <jawaharb@juniper.net>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, linux-i2c@vger.kernel.org, linux-leds@vger.kernel.org, linux-hwmon@vger.kernel.org Subject: Re: [PATCH 04/10] i2c: i2c-mux-i2cs: Add device tree bindings Date: Mon, 10 Oct 2016 17:48:51 +0200 [thread overview] Message-ID: <83dc46b5-9c37-2813-0eca-267250e7cf2e@axentia.se> (raw) In-Reply-To: <1475853669-22480-5-git-send-email-pantelis.antoniou@konsulko.com> On 2016-10-07 17:21, Pantelis Antoniou wrote: > From: Georgi Vlaev <gvlaev@juniper.net> > > Add binding document for the i2c mux driver of Juniper's I2CS FPGA. > > Signed-off-by: Georgi Vlaev <gvlaev@juniper.net> > [Ported from Juniper kernel] > Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> > --- > .../devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt | 27 ++++++++++++++++++++++ > 1 file changed, 27 insertions(+) > create mode 100644 Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt > > diff --git a/Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt b/Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt > new file mode 100644 > index 0000000..03d917f > --- /dev/null > +++ b/Documentation/devicetree/bindings/i2c/jnx,i2c-mux-i2cs.txt > @@ -0,0 +1,27 @@ > +* Juniper I2C Mux on I2CS > + > + I2C mux driver for switching the RE access to the FPC i2c bus. > + Compatible with the FPC variant of the I2CS. > + > +Required properties: > + > + - compatible: "jnx,i2cs-mux-i2cs". jnx,i2c-mux-i2cs > + > +The following required properties are defined externally: > + > + - Standard I2C mux properties. See i2c-mux.txt in this directory. To accommodate changes pending for 4.9, change "mux" to "gate" in this line... > + - I2C child bus nodes. See i2c-mux.txt in this directory. This line is wrong since the child nodes themselves are optional in i2c-gate.txt (and i2c-mux.txt). I guess you can just drop it since the child nodes are mentioned in i2c-gate.txt (and i2c-mux.txt). > + > +Example: > + > +fpc0_mux { > + compatible = "jnx,i2c-mux-i2cs"; > + #address-cells = <1>; > + #size-cells = <0>; ...drop these two... > + > + fpc0i2c0: i2c@0 { ...change i2c@0 to i2c-gate... > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; ...and drop reg. Cheers, Peter > + }; > +}; >
next prev parent reply other threads:[~2016-10-10 15:48 UTC|newest] Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-10-07 15:20 [PATCH 00/10] Introduce Juniper I2CS FPGA driver Pantelis Antoniou 2016-10-07 15:21 ` [PATCH 01/10] mfd: Add Juniper I2CS MFD driver Pantelis Antoniou 2016-10-07 15:21 ` Pantelis Antoniou 2016-10-07 15:21 ` [PATCH 02/10] mfd: dt-bindings: Add bindings for the Juniper I2CS MFD Pantelis Antoniou 2016-10-10 20:23 ` Rob Herring 2016-10-17 19:10 ` Pantelis Antoniou 2016-10-07 15:21 ` [PATCH 03/10] i2c/muxes: Juniper I2CS RE mux Pantelis Antoniou 2016-10-07 15:21 ` Pantelis Antoniou 2016-10-10 15:29 ` Peter Rosin 2016-10-10 15:29 ` Peter Rosin 2016-10-07 15:21 ` [PATCH 04/10] i2c: i2c-mux-i2cs: Add device tree bindings Pantelis Antoniou 2016-10-10 15:48 ` Peter Rosin [this message] 2016-10-10 15:48 ` Peter Rosin 2016-10-17 19:11 ` Pantelis Antoniou 2016-10-10 20:25 ` Rob Herring 2016-10-07 15:21 ` [PATCH 05/10] gpio: i2cs: Juniper I2CS to GPIO pin mapping driver Pantelis Antoniou 2016-10-21 8:41 ` Linus Walleij 2016-10-21 8:41 ` Linus Walleij 2016-10-07 15:21 ` [PATCH 06/10] gpio: gpio-i2cs: Document bindings of I2CS FPGA GPIO block Pantelis Antoniou 2016-10-21 8:59 ` Linus Walleij 2016-10-21 8:59 ` Linus Walleij 2016-10-07 15:21 ` [PATCH 07/10] leds: i2cs: Add I2CS FPGA leds driver Pantelis Antoniou 2016-10-10 9:41 ` Jacek Anaszewski 2016-10-07 15:21 ` [PATCH 08/10] leds: Add binding for Juniper's I2CS FPGA Pantelis Antoniou 2016-10-07 15:21 ` Pantelis Antoniou 2016-10-10 9:41 ` Jacek Anaszewski 2016-10-07 15:21 ` [PATCH 09/10] hwmon: Add driver for Fan Tray on Juniper I2CS FGPA Pantelis Antoniou 2016-10-07 15:21 ` [PATCH 10/10] hwmon: i2cs-fan: Add hwmon dts binding documentation Pantelis Antoniou 2016-10-10 20:29 ` Rob Herring 2016-10-17 19:12 ` Pantelis Antoniou
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=83dc46b5-9c37-2813-0eca-267250e7cf2e@axentia.se \ --to=peda@axentia.se \ --cc=abanerjee@juniper.net \ --cc=devicetree@vger.kernel.org \ --cc=frowand.list@gmail.com \ --cc=gnurou@gmail.com \ --cc=gvlaev@juniper.net \ --cc=j.anaszewski@samsung.com \ --cc=jawaharb@juniper.net \ --cc=jdelvare@suse.com \ --cc=lee.jones@linaro.org \ --cc=linus.walleij@linaro.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-hwmon@vger.kernel.org \ --cc=linux-i2c@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-leds@vger.kernel.org \ --cc=linux@roeck-us.net \ --cc=mark.rutland@arm.com \ --cc=pantelis.antoniou@konsulko.com \ --cc=robh+dt@kernel.org \ --cc=rpurdie@rpsys.net \ --cc=wsa@the-dreams.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.