[PATCH 01/14] soc: renesas: rcar-sysc: Mark rcar_sysc_matches[] __initconst

[PATCH 01/14] soc: renesas: rcar-sysc: Mark rcar_sysc_matches[] __initconst

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

rcar_sysc_matches[] is used only by rcar_sysc_pd_init(), which is
__init.  Hence mark rcar_sysc_matches[] __initconst.

This frees another 1764 bytes (arm32/shmobile_defconfig) or 1000 bytes
(arm64/renesas_defconfig) of memory after kernel init.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/soc/renesas/rcar-sysc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c
index 52c25a5e2646..636872bc2416 100644
--- a/drivers/soc/renesas/rcar-sysc.c
+++ b/drivers/soc/renesas/rcar-sysc.c
@@ -254,7 +254,7 @@ static void __init rcar_sysc_pd_setup(struct rcar_sysc_pd *pd)
 	pm_genpd_init(genpd, gov, false);
 }
 
-static const struct of_device_id rcar_sysc_matches[] = {
+static const struct of_device_id rcar_sysc_matches[] __initconst = {
 #ifdef CONFIG_SYSC_R8A7743
 	{ .compatible = "renesas,r8a7743-sysc", .data = &r8a7743_sysc_info },
 #endif
-- 
2.11.0

[PATCH 01/14] soc: renesas: rcar-sysc: Mark rcar_sysc_matches[] __initconst

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

rcar_sysc_matches[] is used only by rcar_sysc_pd_init(), which is
__init.  Hence mark rcar_sysc_matches[] __initconst.

This frees another 1764 bytes (arm32/shmobile_defconfig) or 1000 bytes
(arm64/renesas_defconfig) of memory after kernel init.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/soc/renesas/rcar-sysc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c
index 52c25a5e2646..636872bc2416 100644
--- a/drivers/soc/renesas/rcar-sysc.c
+++ b/drivers/soc/renesas/rcar-sysc.c
@@ -254,7 +254,7 @@ static void __init rcar_sysc_pd_setup(struct rcar_sysc_pd *pd)
 	pm_genpd_init(genpd, gov, false);
 }
 
-static const struct of_device_id rcar_sysc_matches[] = {
+static const struct of_device_id rcar_sysc_matches[] __initconst = {
 #ifdef CONFIG_SYSC_R8A7743
 	{ .compatible = "renesas,r8a7743-sysc", .data = &r8a7743_sysc_info },
 #endif
-- 
2.11.0

[PATCH 02/14] soc: renesas: identify R-Car V3H

[Simon Horman]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Add support for identifying the R-Car V3H (R8A77980) SoC.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/soc/renesas/renesas-soc.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/soc/renesas/renesas-soc.c b/drivers/soc/renesas/renesas-soc.c
index 926b7fd6db2d..000834321774 100644
--- a/drivers/soc/renesas/renesas-soc.c
+++ b/drivers/soc/renesas/renesas-soc.c
@@ -149,6 +149,11 @@ static const struct renesas_soc soc_rcar_v3m __initconst __maybe_unused = {
 	.id	= 0x54,
 };
 
+static const struct renesas_soc soc_rcar_v3h __initconst __maybe_unused = {
+	.family	= &fam_rcar_gen3,
+	.id	= 0x56,
+};
+
 static const struct renesas_soc soc_rcar_d3 __initconst __maybe_unused = {
 	.family	= &fam_rcar_gen3,
 	.id	= 0x58,
@@ -212,6 +217,9 @@ static const struct of_device_id renesas_socs[] __initconst = {
 #ifdef CONFIG_ARCH_R8A77970
 	{ .compatible = "renesas,r8a77970",	.data = &soc_rcar_v3m },
 #endif
+#ifdef CONFIG_ARCH_R8A77980
+	{ .compatible = "renesas,r8a77980",	.data = &soc_rcar_v3h },
+#endif
 #ifdef CONFIG_ARCH_R8A77995
 	{ .compatible = "renesas,r8a77995",	.data = &soc_rcar_d3 },
 #endif
-- 
2.11.0

[PATCH 02/14] soc: renesas: identify R-Car V3H

[Simon Horman]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Add support for identifying the R-Car V3H (R8A77980) SoC.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/soc/renesas/renesas-soc.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/soc/renesas/renesas-soc.c b/drivers/soc/renesas/renesas-soc.c
index 926b7fd6db2d..000834321774 100644
--- a/drivers/soc/renesas/renesas-soc.c
+++ b/drivers/soc/renesas/renesas-soc.c
@@ -149,6 +149,11 @@ static const struct renesas_soc soc_rcar_v3m __initconst __maybe_unused = {
 	.id	= 0x54,
 };
 
+static const struct renesas_soc soc_rcar_v3h __initconst __maybe_unused = {
+	.family	= &fam_rcar_gen3,
+	.id	= 0x56,
+};
+
 static const struct renesas_soc soc_rcar_d3 __initconst __maybe_unused = {
 	.family	= &fam_rcar_gen3,
 	.id	= 0x58,
@@ -212,6 +217,9 @@ static const struct of_device_id renesas_socs[] __initconst = {
 #ifdef CONFIG_ARCH_R8A77970
 	{ .compatible = "renesas,r8a77970",	.data = &soc_rcar_v3m },
 #endif
+#ifdef CONFIG_ARCH_R8A77980
+	{ .compatible = "renesas,r8a77980",	.data = &soc_rcar_v3h },
+#endif
 #ifdef CONFIG_ARCH_R8A77995
 	{ .compatible = "renesas,r8a77995",	.data = &soc_rcar_d3 },
 #endif
-- 
2.11.0

[PATCH 03/14] soc: renesas: rcar-rst: add R8A77980 support

[Simon Horman]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Add support for R-Car V3H (R8A77980) to the R-Car RST driver -- this driver
is needed for the clock driver to work.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 Documentation/devicetree/bindings/reset/renesas,rst.txt | 1 +
 drivers/soc/renesas/Kconfig                             | 2 +-
 drivers/soc/renesas/rcar-rst.c                          | 1 +
 3 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.txt b/Documentation/devicetree/bindings/reset/renesas,rst.txt
index a8014f3ab8ba..a55b88658446 100644
--- a/Documentation/devicetree/bindings/reset/renesas,rst.txt
+++ b/Documentation/devicetree/bindings/reset/renesas,rst.txt
@@ -27,6 +27,7 @@ Required properties:
 		  - "renesas,r8a7795-rst" (R-Car H3)
 		  - "renesas,r8a7796-rst" (R-Car M3-W)
 		  - "renesas,r8a77970-rst" (R-Car V3M)
+		  - "renesas,r8a77980-rst" (R-Car V3H)
 		  - "renesas,r8a77995-rst" (R-Car D3)
   - reg: Address start and address range for the device.
 
diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index 09550b1da56d..6efd7bef8577 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -4,7 +4,7 @@ config SOC_RENESAS
 	select SOC_BUS
 	select RST_RCAR if ARCH_RCAR_GEN1 || ARCH_RCAR_GEN2 || \
 			   ARCH_R8A7795 || ARCH_R8A7796 || ARCH_R8A77970 || \
-			   ARCH_R8A77995
+			   ARCH_R8A77980 || ARCH_R8A77995
 	select SYSC_R8A7743 if ARCH_R8A7743
 	select SYSC_R8A7745 if ARCH_R8A7745
 	select SYSC_R8A7779 if ARCH_R8A7779
diff --git a/drivers/soc/renesas/rcar-rst.c b/drivers/soc/renesas/rcar-rst.c
index 3316b028f231..e2340eb9ea9c 100644
--- a/drivers/soc/renesas/rcar-rst.c
+++ b/drivers/soc/renesas/rcar-rst.c
@@ -42,6 +42,7 @@ static const struct of_device_id rcar_rst_matches[] __initconst = {
 	{ .compatible = "renesas,r8a7795-rst", .data = &rcar_rst_gen2 },
 	{ .compatible = "renesas,r8a7796-rst", .data = &rcar_rst_gen2 },
 	{ .compatible = "renesas,r8a77970-rst", .data = &rcar_rst_gen2 },
+	{ .compatible = "renesas,r8a77980-rst", .data = &rcar_rst_gen2 },
 	{ .compatible = "renesas,r8a77995-rst", .data = &rcar_rst_gen2 },
 	{ /* sentinel */ }
 };
-- 
2.11.0

[PATCH 03/14] soc: renesas: rcar-rst: add R8A77980 support

[Simon Horman]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Add support for R-Car V3H (R8A77980) to the R-Car RST driver -- this driver
is needed for the clock driver to work.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 Documentation/devicetree/bindings/reset/renesas,rst.txt | 1 +
 drivers/soc/renesas/Kconfig                             | 2 +-
 drivers/soc/renesas/rcar-rst.c                          | 1 +
 3 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.txt b/Documentation/devicetree/bindings/reset/renesas,rst.txt
index a8014f3ab8ba..a55b88658446 100644
--- a/Documentation/devicetree/bindings/reset/renesas,rst.txt
+++ b/Documentation/devicetree/bindings/reset/renesas,rst.txt
@@ -27,6 +27,7 @@ Required properties:
 		  - "renesas,r8a7795-rst" (R-Car H3)
 		  - "renesas,r8a7796-rst" (R-Car M3-W)
 		  - "renesas,r8a77970-rst" (R-Car V3M)
+		  - "renesas,r8a77980-rst" (R-Car V3H)
 		  - "renesas,r8a77995-rst" (R-Car D3)
   - reg: Address start and address range for the device.
 
diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index 09550b1da56d..6efd7bef8577 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -4,7 +4,7 @@ config SOC_RENESAS
 	select SOC_BUS
 	select RST_RCAR if ARCH_RCAR_GEN1 || ARCH_RCAR_GEN2 || \
 			   ARCH_R8A7795 || ARCH_R8A7796 || ARCH_R8A77970 || \
-			   ARCH_R8A77995
+			   ARCH_R8A77980 || ARCH_R8A77995
 	select SYSC_R8A7743 if ARCH_R8A7743
 	select SYSC_R8A7745 if ARCH_R8A7745
 	select SYSC_R8A7779 if ARCH_R8A7779
diff --git a/drivers/soc/renesas/rcar-rst.c b/drivers/soc/renesas/rcar-rst.c
index 3316b028f231..e2340eb9ea9c 100644
--- a/drivers/soc/renesas/rcar-rst.c
+++ b/drivers/soc/renesas/rcar-rst.c
@@ -42,6 +42,7 @@ static const struct of_device_id rcar_rst_matches[] __initconst = {
 	{ .compatible = "renesas,r8a7795-rst", .data = &rcar_rst_gen2 },
 	{ .compatible = "renesas,r8a7796-rst", .data = &rcar_rst_gen2 },
 	{ .compatible = "renesas,r8a77970-rst", .data = &rcar_rst_gen2 },
+	{ .compatible = "renesas,r8a77980-rst", .data = &rcar_rst_gen2 },
 	{ .compatible = "renesas,r8a77995-rst", .data = &rcar_rst_gen2 },
 	{ /* sentinel */ }
 };
-- 
2.11.0

[PATCH 04/14] soc: renesas: rcar-rst: Enable watchdog as reset trigger for Gen2

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

This patch allows for platform specific quirks as some of the SoC need
further customization for the watchdog to work properly, like for R-Car
Gen2 and for RZ/G.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/soc/renesas/rcar-rst.c | 37 ++++++++++++++++++++++++++++++-------
 1 file changed, 30 insertions(+), 7 deletions(-)

diff --git a/drivers/soc/renesas/rcar-rst.c b/drivers/soc/renesas/rcar-rst.c
index e2340eb9ea9c..34136664ece4 100644
--- a/drivers/soc/renesas/rcar-rst.c
+++ b/drivers/soc/renesas/rcar-rst.c
@@ -13,8 +13,18 @@
 #include <linux/of_address.h>
 #include <linux/soc/renesas/rcar-rst.h>
 
+#define WDTRSTCR_RESET		0xA55A0002
+#define WDTRSTCR		0x0054
+
+static int rcar_rst_enable_wdt_reset(void __iomem *base)
+{
+	iowrite32(WDTRSTCR_RESET, base + WDTRSTCR);
+	return 0;
+}
+
 struct rst_config {
-	unsigned int modemr;	/* Mode Monitoring Register Offset */
+	unsigned int modemr;		/* Mode Monitoring Register Offset */
+	int (*configure)(void *base);	/* Platform specific configuration */
 };
 
 static const struct rst_config rcar_rst_gen1 __initconst = {
@@ -23,6 +33,11 @@ static const struct rst_config rcar_rst_gen1 __initconst = {
 
 static const struct rst_config rcar_rst_gen2 __initconst = {
 	.modemr = 0x60,
+	.configure = rcar_rst_enable_wdt_reset,
+};
+
+static const struct rst_config rcar_rst_gen3 __initconst = {
+	.modemr = 0x60,
 };
 
 static const struct of_device_id rcar_rst_matches[] __initconst = {
@@ -38,12 +53,12 @@ static const struct of_device_id rcar_rst_matches[] __initconst = {
 	{ .compatible = "renesas,r8a7792-rst", .data = &rcar_rst_gen2 },
 	{ .compatible = "renesas,r8a7793-rst", .data = &rcar_rst_gen2 },
 	{ .compatible = "renesas,r8a7794-rst", .data = &rcar_rst_gen2 },
-	/* R-Car Gen3 is handled like R-Car Gen2 */
-	{ .compatible = "renesas,r8a7795-rst", .data = &rcar_rst_gen2 },
-	{ .compatible = "renesas,r8a7796-rst", .data = &rcar_rst_gen2 },
-	{ .compatible = "renesas,r8a77970-rst", .data = &rcar_rst_gen2 },
-	{ .compatible = "renesas,r8a77980-rst", .data = &rcar_rst_gen2 },
-	{ .compatible = "renesas,r8a77995-rst", .data = &rcar_rst_gen2 },
+	/* R-Car Gen3 */
+	{ .compatible = "renesas,r8a7795-rst", .data = &rcar_rst_gen3 },
+	{ .compatible = "renesas,r8a7796-rst", .data = &rcar_rst_gen3 },
+	{ .compatible = "renesas,r8a77970-rst", .data = &rcar_rst_gen3 },
+	{ .compatible = "renesas,r8a77980-rst", .data = &rcar_rst_gen3 },
+	{ .compatible = "renesas,r8a77995-rst", .data = &rcar_rst_gen3 },
 	{ /* sentinel */ }
 };
 
@@ -72,6 +87,14 @@ static int __init rcar_rst_init(void)
 	rcar_rst_base = base;
 	cfg = match->data;
 	saved_mode = ioread32(base + cfg->modemr);
+	if (cfg->configure) {
+		error = cfg->configure(base);
+		if (error) {
+			pr_warn("%pOF: Cannot run SoC specific configuration\n",
+				np);
+			goto out_put;
+		}
+	}
 
 	pr_debug("%pOF: MODE = 0x%08x\n", np, saved_mode);
 
-- 
2.11.0

[PATCH 04/14] soc: renesas: rcar-rst: Enable watchdog as reset trigger for Gen2

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

This patch allows for platform specific quirks as some of the SoC need
further customization for the watchdog to work properly, like for R-Car
Gen2 and for RZ/G.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/soc/renesas/rcar-rst.c | 37 ++++++++++++++++++++++++++++++-------
 1 file changed, 30 insertions(+), 7 deletions(-)

diff --git a/drivers/soc/renesas/rcar-rst.c b/drivers/soc/renesas/rcar-rst.c
index e2340eb9ea9c..34136664ece4 100644
--- a/drivers/soc/renesas/rcar-rst.c
+++ b/drivers/soc/renesas/rcar-rst.c
@@ -13,8 +13,18 @@
 #include <linux/of_address.h>
 #include <linux/soc/renesas/rcar-rst.h>
 
+#define WDTRSTCR_RESET		0xA55A0002
+#define WDTRSTCR		0x0054
+
+static int rcar_rst_enable_wdt_reset(void __iomem *base)
+{
+	iowrite32(WDTRSTCR_RESET, base + WDTRSTCR);
+	return 0;
+}
+
 struct rst_config {
-	unsigned int modemr;	/* Mode Monitoring Register Offset */
+	unsigned int modemr;		/* Mode Monitoring Register Offset */
+	int (*configure)(void *base);	/* Platform specific configuration */
 };
 
 static const struct rst_config rcar_rst_gen1 __initconst = {
@@ -23,6 +33,11 @@ static const struct rst_config rcar_rst_gen1 __initconst = {
 
 static const struct rst_config rcar_rst_gen2 __initconst = {
 	.modemr = 0x60,
+	.configure = rcar_rst_enable_wdt_reset,
+};
+
+static const struct rst_config rcar_rst_gen3 __initconst = {
+	.modemr = 0x60,
 };
 
 static const struct of_device_id rcar_rst_matches[] __initconst = {
@@ -38,12 +53,12 @@ static const struct of_device_id rcar_rst_matches[] __initconst = {
 	{ .compatible = "renesas,r8a7792-rst", .data = &rcar_rst_gen2 },
 	{ .compatible = "renesas,r8a7793-rst", .data = &rcar_rst_gen2 },
 	{ .compatible = "renesas,r8a7794-rst", .data = &rcar_rst_gen2 },
-	/* R-Car Gen3 is handled like R-Car Gen2 */
-	{ .compatible = "renesas,r8a7795-rst", .data = &rcar_rst_gen2 },
-	{ .compatible = "renesas,r8a7796-rst", .data = &rcar_rst_gen2 },
-	{ .compatible = "renesas,r8a77970-rst", .data = &rcar_rst_gen2 },
-	{ .compatible = "renesas,r8a77980-rst", .data = &rcar_rst_gen2 },
-	{ .compatible = "renesas,r8a77995-rst", .data = &rcar_rst_gen2 },
+	/* R-Car Gen3 */
+	{ .compatible = "renesas,r8a7795-rst", .data = &rcar_rst_gen3 },
+	{ .compatible = "renesas,r8a7796-rst", .data = &rcar_rst_gen3 },
+	{ .compatible = "renesas,r8a77970-rst", .data = &rcar_rst_gen3 },
+	{ .compatible = "renesas,r8a77980-rst", .data = &rcar_rst_gen3 },
+	{ .compatible = "renesas,r8a77995-rst", .data = &rcar_rst_gen3 },
 	{ /* sentinel */ }
 };
 
@@ -72,6 +87,14 @@ static int __init rcar_rst_init(void)
 	rcar_rst_base = base;
 	cfg = match->data;
 	saved_mode = ioread32(base + cfg->modemr);
+	if (cfg->configure) {
+		error = cfg->configure(base);
+		if (error) {
+			pr_warn("%pOF: Cannot run SoC specific configuration\n",
+				np);
+			goto out_put;
+		}
+	}
 
 	pr_debug("%pOF: MODE = 0x%08x\n", np, saved_mode);
 
-- 
2.11.0

[PATCH 05/14] soc: renesas: r8a77970-sysc: fix power area parents

[Simon Horman]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

According to the figure 9.2(b) of the R-Car Series, 3rd Generation User’s
Manual: Hardware Rev. 0.80 the A2IRn and A2SCn power areas in R8A77970 have
the A3IR area as a parent, thus the SYSC driver has those parents wrong...

Fixes: bab9b2a74fe9 ("soc: renesas: rcar-sysc: add R8A77970 support")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/soc/renesas/r8a77970-sysc.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/soc/renesas/r8a77970-sysc.c b/drivers/soc/renesas/r8a77970-sysc.c
index 8c614164718e..caf894f193ed 100644
--- a/drivers/soc/renesas/r8a77970-sysc.c
+++ b/drivers/soc/renesas/r8a77970-sysc.c
@@ -25,12 +25,12 @@ static const struct rcar_sysc_area r8a77970_areas[] __initconst = {
 	  PD_CPU_NOCR },
 	{ "cr7",	0x240, 0, R8A77970_PD_CR7,	R8A77970_PD_ALWAYS_ON },
 	{ "a3ir",	0x180, 0, R8A77970_PD_A3IR,	R8A77970_PD_ALWAYS_ON },
-	{ "a2ir0",	0x400, 0, R8A77970_PD_A2IR0,	R8A77970_PD_ALWAYS_ON },
-	{ "a2ir1",	0x400, 1, R8A77970_PD_A2IR1,	R8A77970_PD_A2IR0 },
-	{ "a2ir2",	0x400, 2, R8A77970_PD_A2IR2,	R8A77970_PD_A2IR0 },
-	{ "a2ir3",	0x400, 3, R8A77970_PD_A2IR3,	R8A77970_PD_A2IR0 },
-	{ "a2sc0",	0x400, 4, R8A77970_PD_A2SC0,	R8A77970_PD_ALWAYS_ON },
-	{ "a2sc1",	0x400, 5, R8A77970_PD_A2SC1,	R8A77970_PD_A2SC0 },
+	{ "a2ir0",	0x400, 0, R8A77970_PD_A2IR0,	R8A77970_PD_A3IR },
+	{ "a2ir1",	0x400, 1, R8A77970_PD_A2IR1,	R8A77970_PD_A3IR },
+	{ "a2ir2",	0x400, 2, R8A77970_PD_A2IR2,	R8A77970_PD_A3IR },
+	{ "a2ir3",	0x400, 3, R8A77970_PD_A2IR3,	R8A77970_PD_A3IR },
+	{ "a2sc0",	0x400, 4, R8A77970_PD_A2SC0,	R8A77970_PD_A3IR },
+	{ "a2sc1",	0x400, 5, R8A77970_PD_A2SC1,	R8A77970_PD_A3IR },
 };
 
 const struct rcar_sysc_info r8a77970_sysc_info __initconst = {
-- 
2.11.0

[PATCH 05/14] soc: renesas: r8a77970-sysc: fix power area parents

[Simon Horman]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

According to the figure 9.2(b) of the R-Car Series, 3rd Generation User?s
Manual: Hardware Rev. 0.80 the A2IRn and A2SCn power areas in R8A77970 have
the A3IR area as a parent, thus the SYSC driver has those parents wrong...

Fixes: bab9b2a74fe9 ("soc: renesas: rcar-sysc: add R8A77970 support")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/soc/renesas/r8a77970-sysc.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/soc/renesas/r8a77970-sysc.c b/drivers/soc/renesas/r8a77970-sysc.c
index 8c614164718e..caf894f193ed 100644
--- a/drivers/soc/renesas/r8a77970-sysc.c
+++ b/drivers/soc/renesas/r8a77970-sysc.c
@@ -25,12 +25,12 @@ static const struct rcar_sysc_area r8a77970_areas[] __initconst = {
 	  PD_CPU_NOCR },
 	{ "cr7",	0x240, 0, R8A77970_PD_CR7,	R8A77970_PD_ALWAYS_ON },
 	{ "a3ir",	0x180, 0, R8A77970_PD_A3IR,	R8A77970_PD_ALWAYS_ON },
-	{ "a2ir0",	0x400, 0, R8A77970_PD_A2IR0,	R8A77970_PD_ALWAYS_ON },
-	{ "a2ir1",	0x400, 1, R8A77970_PD_A2IR1,	R8A77970_PD_A2IR0 },
-	{ "a2ir2",	0x400, 2, R8A77970_PD_A2IR2,	R8A77970_PD_A2IR0 },
-	{ "a2ir3",	0x400, 3, R8A77970_PD_A2IR3,	R8A77970_PD_A2IR0 },
-	{ "a2sc0",	0x400, 4, R8A77970_PD_A2SC0,	R8A77970_PD_ALWAYS_ON },
-	{ "a2sc1",	0x400, 5, R8A77970_PD_A2SC1,	R8A77970_PD_A2SC0 },
+	{ "a2ir0",	0x400, 0, R8A77970_PD_A2IR0,	R8A77970_PD_A3IR },
+	{ "a2ir1",	0x400, 1, R8A77970_PD_A2IR1,	R8A77970_PD_A3IR },
+	{ "a2ir2",	0x400, 2, R8A77970_PD_A2IR2,	R8A77970_PD_A3IR },
+	{ "a2ir3",	0x400, 3, R8A77970_PD_A2IR3,	R8A77970_PD_A3IR },
+	{ "a2sc0",	0x400, 4, R8A77970_PD_A2SC0,	R8A77970_PD_A3IR },
+	{ "a2sc1",	0x400, 5, R8A77970_PD_A2SC1,	R8A77970_PD_A3IR },
 };
 
 const struct rcar_sysc_info r8a77970_sysc_info __initconst = {
-- 
2.11.0

[PATCH 06/14] dt-bindings: power: add R8A77980 SYSC power domain definitions

[Simon Horman]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Add macros usable by the device tree sources to reference R8A77980 SYSC
power domains by index.

Based on the original (and large) patch by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 include/dt-bindings/power/r8a77980-sysc.h | 43 +++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)
 create mode 100644 include/dt-bindings/power/r8a77980-sysc.h

diff --git a/include/dt-bindings/power/r8a77980-sysc.h b/include/dt-bindings/power/r8a77980-sysc.h
new file mode 100644
index 000000000000..2c90c1237725
--- /dev/null
+++ b/include/dt-bindings/power/r8a77980-sysc.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+#ifndef __DT_BINDINGS_POWER_R8A77980_SYSC_H__
+#define __DT_BINDINGS_POWER_R8A77980_SYSC_H__
+
+/*
+ * These power domain indices match the numbers of the interrupt bits
+ * representing the power areas in the various Interrupt Registers
+ * (e.g. SYSCISR, Interrupt Status Register)
+ */
+
+#define R8A77980_PD_A2SC2		0
+#define R8A77980_PD_A2SC3		1
+#define R8A77980_PD_A2SC4		2
+#define R8A77980_PD_A2PD0		3
+#define R8A77980_PD_A2PD1		4
+#define R8A77980_PD_CA53_CPU0		5
+#define R8A77980_PD_CA53_CPU1		6
+#define R8A77980_PD_CA53_CPU2		7
+#define R8A77980_PD_CA53_CPU3		8
+#define R8A77980_PD_A2CN		10
+#define R8A77980_PD_A3VIP		11
+#define R8A77980_PD_A2IR5		12
+#define R8A77980_PD_CR7			13
+#define R8A77980_PD_A2IR4		15
+#define R8A77980_PD_CA53_SCU		21
+#define R8A77980_PD_A2IR0		23
+#define R8A77980_PD_A3IR		24
+#define R8A77980_PD_A3VIP1		25
+#define R8A77980_PD_A3VIP2		26
+#define R8A77980_PD_A2IR1		27
+#define R8A77980_PD_A2IR2		28
+#define R8A77980_PD_A2IR3		29
+#define R8A77980_PD_A2SC0		30
+#define R8A77980_PD_A2SC1		31
+
+/* Always-on power area */
+#define R8A77980_PD_ALWAYS_ON		32
+
+#endif /* __DT_BINDINGS_POWER_R8A77980_SYSC_H__ */
-- 
2.11.0

[PATCH 06/14] dt-bindings: power: add R8A77980 SYSC power domain definitions

[Simon Horman]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Add macros usable by the device tree sources to reference R8A77980 SYSC
power domains by index.

Based on the original (and large) patch by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 include/dt-bindings/power/r8a77980-sysc.h | 43 +++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)
 create mode 100644 include/dt-bindings/power/r8a77980-sysc.h

diff --git a/include/dt-bindings/power/r8a77980-sysc.h b/include/dt-bindings/power/r8a77980-sysc.h
new file mode 100644
index 000000000000..2c90c1237725
--- /dev/null
+++ b/include/dt-bindings/power/r8a77980-sysc.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+#ifndef __DT_BINDINGS_POWER_R8A77980_SYSC_H__
+#define __DT_BINDINGS_POWER_R8A77980_SYSC_H__
+
+/*
+ * These power domain indices match the numbers of the interrupt bits
+ * representing the power areas in the various Interrupt Registers
+ * (e.g. SYSCISR, Interrupt Status Register)
+ */
+
+#define R8A77980_PD_A2SC2		0
+#define R8A77980_PD_A2SC3		1
+#define R8A77980_PD_A2SC4		2
+#define R8A77980_PD_A2PD0		3
+#define R8A77980_PD_A2PD1		4
+#define R8A77980_PD_CA53_CPU0		5
+#define R8A77980_PD_CA53_CPU1		6
+#define R8A77980_PD_CA53_CPU2		7
+#define R8A77980_PD_CA53_CPU3		8
+#define R8A77980_PD_A2CN		10
+#define R8A77980_PD_A3VIP		11
+#define R8A77980_PD_A2IR5		12
+#define R8A77980_PD_CR7			13
+#define R8A77980_PD_A2IR4		15
+#define R8A77980_PD_CA53_SCU		21
+#define R8A77980_PD_A2IR0		23
+#define R8A77980_PD_A3IR		24
+#define R8A77980_PD_A3VIP1		25
+#define R8A77980_PD_A3VIP2		26
+#define R8A77980_PD_A2IR1		27
+#define R8A77980_PD_A2IR2		28
+#define R8A77980_PD_A2IR3		29
+#define R8A77980_PD_A2SC0		30
+#define R8A77980_PD_A2SC1		31
+
+/* Always-on power area */
+#define R8A77980_PD_ALWAYS_ON		32
+
+#endif /* __DT_BINDINGS_POWER_R8A77980_SYSC_H__ */
-- 
2.11.0

[PATCH 07/14] soc: renesas: rcar-sysc: add R8A77980 support

[Simon Horman]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Add support for R-Car V3H (R8A77980) SoC power areas to the R-Car SYSC
driver.

Based on the original (and large) patch by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 .../bindings/power/renesas,rcar-sysc.txt           |  1 +
 drivers/soc/renesas/Kconfig                        |  5 +++
 drivers/soc/renesas/Makefile                       |  1 +
 drivers/soc/renesas/r8a77980-sysc.c                | 52 ++++++++++++++++++++++
 drivers/soc/renesas/rcar-sysc.c                    |  3 ++
 drivers/soc/renesas/rcar-sysc.h                    |  1 +
 6 files changed, 63 insertions(+)
 create mode 100644 drivers/soc/renesas/r8a77980-sysc.c

diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
index 8690f10426a3..6284a9550b3c 100644
--- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
+++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
@@ -18,6 +18,7 @@ Required properties:
       - "renesas,r8a7795-sysc" (R-Car H3)
       - "renesas,r8a7796-sysc" (R-Car M3-W)
       - "renesas,r8a77970-sysc" (R-Car V3M)
+      - "renesas,r8a77980-sysc" (R-Car V3H)
       - "renesas,r8a77995-sysc" (R-Car D3)
   - reg: Address start and address range for the device.
   - #power-domain-cells: Must be 1.
diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index 6efd7bef8577..6caa393e3a2d 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -15,6 +15,7 @@ config SOC_RENESAS
 	select SYSC_R8A7795 if ARCH_R8A7795
 	select SYSC_R8A7796 if ARCH_R8A7796
 	select SYSC_R8A77970 if ARCH_R8A77970
+	select SYSC_R8A77980 if ARCH_R8A77980
 	select SYSC_R8A77995 if ARCH_R8A77995
 
 if SOC_RENESAS
@@ -60,6 +61,10 @@ config SYSC_R8A77970
 	bool "R-Car V3M System Controller support" if COMPILE_TEST
 	select SYSC_RCAR
 
+config SYSC_R8A77980
+	bool "R-Car V3H System Controller support" if COMPILE_TEST
+	select SYSC_RCAR
+
 config SYSC_R8A77995
 	bool "R-Car D3 System Controller support" if COMPILE_TEST
 	select SYSC_RCAR
diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile
index 845d62a08ce1..d3b7bb3284c0 100644
--- a/drivers/soc/renesas/Makefile
+++ b/drivers/soc/renesas/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_SYSC_R8A7794)	+= r8a7794-sysc.o
 obj-$(CONFIG_SYSC_R8A7795)	+= r8a7795-sysc.o
 obj-$(CONFIG_SYSC_R8A7796)	+= r8a7796-sysc.o
 obj-$(CONFIG_SYSC_R8A77970)	+= r8a77970-sysc.o
+obj-$(CONFIG_SYSC_R8A77980)	+= r8a77980-sysc.o
 obj-$(CONFIG_SYSC_R8A77995)	+= r8a77995-sysc.o
 
 # Family
diff --git a/drivers/soc/renesas/r8a77980-sysc.c b/drivers/soc/renesas/r8a77980-sysc.c
new file mode 100644
index 000000000000..9265fb525ef3
--- /dev/null
+++ b/drivers/soc/renesas/r8a77980-sysc.c
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas R-Car V3H System Controller
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+
+#include <linux/bug.h>
+#include <linux/kernel.h>
+
+#include <dt-bindings/power/r8a77980-sysc.h>
+
+#include "rcar-sysc.h"
+
+static const struct rcar_sysc_area r8a77980_areas[] __initconst = {
+	{ "always-on",	    0, 0, R8A77980_PD_ALWAYS_ON, -1, PD_ALWAYS_ON },
+	{ "ca53-scu",	0x140, 0, R8A77980_PD_CA53_SCU,	R8A77980_PD_ALWAYS_ON,
+	  PD_SCU },
+	{ "ca53-cpu0",	0x200, 0, R8A77980_PD_CA53_CPU0, R8A77980_PD_CA53_SCU,
+	  PD_CPU_NOCR },
+	{ "ca53-cpu1",	0x200, 1, R8A77980_PD_CA53_CPU1, R8A77980_PD_CA53_SCU,
+	  PD_CPU_NOCR },
+	{ "ca53-cpu2",	0x200, 2, R8A77980_PD_CA53_CPU2, R8A77980_PD_CA53_SCU,
+	  PD_CPU_NOCR },
+	{ "ca53-cpu3",	0x200, 3, R8A77980_PD_CA53_CPU3, R8A77980_PD_CA53_SCU,
+	  PD_CPU_NOCR },
+	{ "cr7",	0x240, 0, R8A77980_PD_CR7,	R8A77980_PD_ALWAYS_ON },
+	{ "a3ir",	0x180, 0, R8A77980_PD_A3IR,	R8A77980_PD_ALWAYS_ON },
+	{ "a2ir0",	0x400, 0, R8A77980_PD_A2IR0,	R8A77980_PD_A3IR },
+	{ "a2ir1",	0x400, 1, R8A77980_PD_A2IR1,	R8A77980_PD_A3IR },
+	{ "a2ir2",	0x400, 2, R8A77980_PD_A2IR2,	R8A77980_PD_A3IR },
+	{ "a2ir3",	0x400, 3, R8A77980_PD_A2IR3,	R8A77980_PD_A3IR },
+	{ "a2ir4",	0x400, 4, R8A77980_PD_A2IR4,	R8A77980_PD_A3IR },
+	{ "a2ir5",	0x400, 5, R8A77980_PD_A2IR5,	R8A77980_PD_A3IR },
+	{ "a2sc0",	0x400, 6, R8A77980_PD_A2SC0,	R8A77980_PD_A3IR },
+	{ "a2sc1",	0x400, 7, R8A77980_PD_A2SC1,	R8A77980_PD_A3IR },
+	{ "a2sc2",	0x400, 8, R8A77980_PD_A2SC2,	R8A77980_PD_A3IR },
+	{ "a2sc3",	0x400, 9, R8A77980_PD_A2SC3,	R8A77980_PD_A3IR },
+	{ "a2sc4",	0x400, 10, R8A77980_PD_A2SC4,	R8A77980_PD_A3IR },
+	{ "a2pd0",	0x400, 11, R8A77980_PD_A2PD0,	R8A77980_PD_A3IR },
+	{ "a2pd1",	0x400, 12, R8A77980_PD_A2PD1,	R8A77980_PD_A3IR },
+	{ "a2cn",	0x400, 13, R8A77980_PD_A2CN,	R8A77980_PD_A3IR },
+	{ "a3vip",	0x2c0, 0, R8A77980_PD_A3VIP,	R8A77980_PD_ALWAYS_ON },
+	{ "a3vip1",	0x300, 0, R8A77980_PD_A3VIP1,	R8A77980_PD_A3VIP },
+	{ "a3vip2",	0x280, 0, R8A77980_PD_A3VIP2,	R8A77980_PD_A3VIP },
+};
+
+const struct rcar_sysc_info r8a77980_sysc_info __initconst = {
+	.areas = r8a77980_areas,
+	.num_areas = ARRAY_SIZE(r8a77980_areas),
+};
diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c
index 636872bc2416..72b0f4a9ad4e 100644
--- a/drivers/soc/renesas/rcar-sysc.c
+++ b/drivers/soc/renesas/rcar-sysc.c
@@ -287,6 +287,9 @@ static const struct of_device_id rcar_sysc_matches[] __initconst = {
 #ifdef CONFIG_SYSC_R8A77970
 	{ .compatible = "renesas,r8a77970-sysc", .data = &r8a77970_sysc_info },
 #endif
+#ifdef CONFIG_SYSC_R8A77980
+	{ .compatible = "renesas,r8a77980-sysc", .data = &r8a77980_sysc_info },
+#endif
 #ifdef CONFIG_SYSC_R8A77995
 	{ .compatible = "renesas,r8a77995-sysc", .data = &r8a77995_sysc_info },
 #endif
diff --git a/drivers/soc/renesas/rcar-sysc.h b/drivers/soc/renesas/rcar-sysc.h
index 9d9daf9eb91b..974b18619c08 100644
--- a/drivers/soc/renesas/rcar-sysc.h
+++ b/drivers/soc/renesas/rcar-sysc.h
@@ -59,6 +59,7 @@ extern const struct rcar_sysc_info r8a7794_sysc_info;
 extern const struct rcar_sysc_info r8a7795_sysc_info;
 extern const struct rcar_sysc_info r8a7796_sysc_info;
 extern const struct rcar_sysc_info r8a77970_sysc_info;
+extern const struct rcar_sysc_info r8a77980_sysc_info;
 extern const struct rcar_sysc_info r8a77995_sysc_info;
 
 
-- 
2.11.0

[PATCH 07/14] soc: renesas: rcar-sysc: add R8A77980 support

[Simon Horman]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Add support for R-Car V3H (R8A77980) SoC power areas to the R-Car SYSC
driver.

Based on the original (and large) patch by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 .../bindings/power/renesas,rcar-sysc.txt           |  1 +
 drivers/soc/renesas/Kconfig                        |  5 +++
 drivers/soc/renesas/Makefile                       |  1 +
 drivers/soc/renesas/r8a77980-sysc.c                | 52 ++++++++++++++++++++++
 drivers/soc/renesas/rcar-sysc.c                    |  3 ++
 drivers/soc/renesas/rcar-sysc.h                    |  1 +
 6 files changed, 63 insertions(+)
 create mode 100644 drivers/soc/renesas/r8a77980-sysc.c

diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
index 8690f10426a3..6284a9550b3c 100644
--- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
+++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
@@ -18,6 +18,7 @@ Required properties:
       - "renesas,r8a7795-sysc" (R-Car H3)
       - "renesas,r8a7796-sysc" (R-Car M3-W)
       - "renesas,r8a77970-sysc" (R-Car V3M)
+      - "renesas,r8a77980-sysc" (R-Car V3H)
       - "renesas,r8a77995-sysc" (R-Car D3)
   - reg: Address start and address range for the device.
   - #power-domain-cells: Must be 1.
diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index 6efd7bef8577..6caa393e3a2d 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -15,6 +15,7 @@ config SOC_RENESAS
 	select SYSC_R8A7795 if ARCH_R8A7795
 	select SYSC_R8A7796 if ARCH_R8A7796
 	select SYSC_R8A77970 if ARCH_R8A77970
+	select SYSC_R8A77980 if ARCH_R8A77980
 	select SYSC_R8A77995 if ARCH_R8A77995
 
 if SOC_RENESAS
@@ -60,6 +61,10 @@ config SYSC_R8A77970
 	bool "R-Car V3M System Controller support" if COMPILE_TEST
 	select SYSC_RCAR
 
+config SYSC_R8A77980
+	bool "R-Car V3H System Controller support" if COMPILE_TEST
+	select SYSC_RCAR
+
 config SYSC_R8A77995
 	bool "R-Car D3 System Controller support" if COMPILE_TEST
 	select SYSC_RCAR
diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile
index 845d62a08ce1..d3b7bb3284c0 100644
--- a/drivers/soc/renesas/Makefile
+++ b/drivers/soc/renesas/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_SYSC_R8A7794)	+= r8a7794-sysc.o
 obj-$(CONFIG_SYSC_R8A7795)	+= r8a7795-sysc.o
 obj-$(CONFIG_SYSC_R8A7796)	+= r8a7796-sysc.o
 obj-$(CONFIG_SYSC_R8A77970)	+= r8a77970-sysc.o
+obj-$(CONFIG_SYSC_R8A77980)	+= r8a77980-sysc.o
 obj-$(CONFIG_SYSC_R8A77995)	+= r8a77995-sysc.o
 
 # Family
diff --git a/drivers/soc/renesas/r8a77980-sysc.c b/drivers/soc/renesas/r8a77980-sysc.c
new file mode 100644
index 000000000000..9265fb525ef3
--- /dev/null
+++ b/drivers/soc/renesas/r8a77980-sysc.c
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas R-Car V3H System Controller
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+
+#include <linux/bug.h>
+#include <linux/kernel.h>
+
+#include <dt-bindings/power/r8a77980-sysc.h>
+
+#include "rcar-sysc.h"
+
+static const struct rcar_sysc_area r8a77980_areas[] __initconst = {
+	{ "always-on",	    0, 0, R8A77980_PD_ALWAYS_ON, -1, PD_ALWAYS_ON },
+	{ "ca53-scu",	0x140, 0, R8A77980_PD_CA53_SCU,	R8A77980_PD_ALWAYS_ON,
+	  PD_SCU },
+	{ "ca53-cpu0",	0x200, 0, R8A77980_PD_CA53_CPU0, R8A77980_PD_CA53_SCU,
+	  PD_CPU_NOCR },
+	{ "ca53-cpu1",	0x200, 1, R8A77980_PD_CA53_CPU1, R8A77980_PD_CA53_SCU,
+	  PD_CPU_NOCR },
+	{ "ca53-cpu2",	0x200, 2, R8A77980_PD_CA53_CPU2, R8A77980_PD_CA53_SCU,
+	  PD_CPU_NOCR },
+	{ "ca53-cpu3",	0x200, 3, R8A77980_PD_CA53_CPU3, R8A77980_PD_CA53_SCU,
+	  PD_CPU_NOCR },
+	{ "cr7",	0x240, 0, R8A77980_PD_CR7,	R8A77980_PD_ALWAYS_ON },
+	{ "a3ir",	0x180, 0, R8A77980_PD_A3IR,	R8A77980_PD_ALWAYS_ON },
+	{ "a2ir0",	0x400, 0, R8A77980_PD_A2IR0,	R8A77980_PD_A3IR },
+	{ "a2ir1",	0x400, 1, R8A77980_PD_A2IR1,	R8A77980_PD_A3IR },
+	{ "a2ir2",	0x400, 2, R8A77980_PD_A2IR2,	R8A77980_PD_A3IR },
+	{ "a2ir3",	0x400, 3, R8A77980_PD_A2IR3,	R8A77980_PD_A3IR },
+	{ "a2ir4",	0x400, 4, R8A77980_PD_A2IR4,	R8A77980_PD_A3IR },
+	{ "a2ir5",	0x400, 5, R8A77980_PD_A2IR5,	R8A77980_PD_A3IR },
+	{ "a2sc0",	0x400, 6, R8A77980_PD_A2SC0,	R8A77980_PD_A3IR },
+	{ "a2sc1",	0x400, 7, R8A77980_PD_A2SC1,	R8A77980_PD_A3IR },
+	{ "a2sc2",	0x400, 8, R8A77980_PD_A2SC2,	R8A77980_PD_A3IR },
+	{ "a2sc3",	0x400, 9, R8A77980_PD_A2SC3,	R8A77980_PD_A3IR },
+	{ "a2sc4",	0x400, 10, R8A77980_PD_A2SC4,	R8A77980_PD_A3IR },
+	{ "a2pd0",	0x400, 11, R8A77980_PD_A2PD0,	R8A77980_PD_A3IR },
+	{ "a2pd1",	0x400, 12, R8A77980_PD_A2PD1,	R8A77980_PD_A3IR },
+	{ "a2cn",	0x400, 13, R8A77980_PD_A2CN,	R8A77980_PD_A3IR },
+	{ "a3vip",	0x2c0, 0, R8A77980_PD_A3VIP,	R8A77980_PD_ALWAYS_ON },
+	{ "a3vip1",	0x300, 0, R8A77980_PD_A3VIP1,	R8A77980_PD_A3VIP },
+	{ "a3vip2",	0x280, 0, R8A77980_PD_A3VIP2,	R8A77980_PD_A3VIP },
+};
+
+const struct rcar_sysc_info r8a77980_sysc_info __initconst = {
+	.areas = r8a77980_areas,
+	.num_areas = ARRAY_SIZE(r8a77980_areas),
+};
diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c
index 636872bc2416..72b0f4a9ad4e 100644
--- a/drivers/soc/renesas/rcar-sysc.c
+++ b/drivers/soc/renesas/rcar-sysc.c
@@ -287,6 +287,9 @@ static const struct of_device_id rcar_sysc_matches[] __initconst = {
 #ifdef CONFIG_SYSC_R8A77970
 	{ .compatible = "renesas,r8a77970-sysc", .data = &r8a77970_sysc_info },
 #endif
+#ifdef CONFIG_SYSC_R8A77980
+	{ .compatible = "renesas,r8a77980-sysc", .data = &r8a77980_sysc_info },
+#endif
 #ifdef CONFIG_SYSC_R8A77995
 	{ .compatible = "renesas,r8a77995-sysc", .data = &r8a77995_sysc_info },
 #endif
diff --git a/drivers/soc/renesas/rcar-sysc.h b/drivers/soc/renesas/rcar-sysc.h
index 9d9daf9eb91b..974b18619c08 100644
--- a/drivers/soc/renesas/rcar-sysc.h
+++ b/drivers/soc/renesas/rcar-sysc.h
@@ -59,6 +59,7 @@ extern const struct rcar_sysc_info r8a7794_sysc_info;
 extern const struct rcar_sysc_info r8a7795_sysc_info;
 extern const struct rcar_sysc_info r8a7796_sysc_info;
 extern const struct rcar_sysc_info r8a77970_sysc_info;
+extern const struct rcar_sysc_info r8a77980_sysc_info;
 extern const struct rcar_sysc_info r8a77995_sysc_info;
 
 
-- 
2.11.0

[PATCH 08/14] soc: renesas: Identify R-Car M3-N

[Simon Horman]

From: Jacopo Mondi <jacopo+renesas@jmondi.org>

Add support for indentifying R-Car M3-N (R8A77965) SoC.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/soc/renesas/renesas-soc.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/soc/renesas/renesas-soc.c b/drivers/soc/renesas/renesas-soc.c
index 000834321774..ea71c413c926 100644
--- a/drivers/soc/renesas/renesas-soc.c
+++ b/drivers/soc/renesas/renesas-soc.c
@@ -144,6 +144,11 @@ static const struct renesas_soc soc_rcar_m3_w __initconst __maybe_unused = {
 	.id	= 0x52,
 };
 
+static const struct renesas_soc soc_rcar_m3_n __initconst __maybe_unused = {
+	.family = &fam_rcar_gen3,
+	.id     = 0x55,
+};
+
 static const struct renesas_soc soc_rcar_v3m __initconst __maybe_unused = {
 	.family	= &fam_rcar_gen3,
 	.id	= 0x54,
@@ -214,6 +219,9 @@ static const struct of_device_id renesas_socs[] __initconst = {
 #ifdef CONFIG_ARCH_R8A7796
 	{ .compatible = "renesas,r8a7796",	.data = &soc_rcar_m3_w },
 #endif
+#ifdef CONFIG_ARCH_R8A77965
+	{ .compatible = "renesas,r8a77965",	.data = &soc_rcar_m3_n },
+#endif
 #ifdef CONFIG_ARCH_R8A77970
 	{ .compatible = "renesas,r8a77970",	.data = &soc_rcar_v3m },
 #endif
-- 
2.11.0

[PATCH 08/14] soc: renesas: Identify R-Car M3-N

[Simon Horman]

From: Jacopo Mondi <jacopo+renesas@jmondi.org>

Add support for indentifying R-Car M3-N (R8A77965) SoC.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/soc/renesas/renesas-soc.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/soc/renesas/renesas-soc.c b/drivers/soc/renesas/renesas-soc.c
index 000834321774..ea71c413c926 100644
--- a/drivers/soc/renesas/renesas-soc.c
+++ b/drivers/soc/renesas/renesas-soc.c
@@ -144,6 +144,11 @@ static const struct renesas_soc soc_rcar_m3_w __initconst __maybe_unused = {
 	.id	= 0x52,
 };
 
+static const struct renesas_soc soc_rcar_m3_n __initconst __maybe_unused = {
+	.family = &fam_rcar_gen3,
+	.id     = 0x55,
+};
+
 static const struct renesas_soc soc_rcar_v3m __initconst __maybe_unused = {
 	.family	= &fam_rcar_gen3,
 	.id	= 0x54,
@@ -214,6 +219,9 @@ static const struct of_device_id renesas_socs[] __initconst = {
 #ifdef CONFIG_ARCH_R8A7796
 	{ .compatible = "renesas,r8a7796",	.data = &soc_rcar_m3_w },
 #endif
+#ifdef CONFIG_ARCH_R8A77965
+	{ .compatible = "renesas,r8a77965",	.data = &soc_rcar_m3_n },
+#endif
 #ifdef CONFIG_ARCH_R8A77970
 	{ .compatible = "renesas,r8a77970",	.data = &soc_rcar_v3m },
 #endif
-- 
2.11.0

[PATCH 09/14] soc: renesas: rcar-sysc: Add R-Car M3-N support

[Simon Horman]

From: Jacopo Mondi <jacopo+renesas@jmondi.org>

Add support for R-Car M3-N (R8A77965) power areas.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 .../bindings/power/renesas,rcar-sysc.txt           |  1 +
 drivers/soc/renesas/Kconfig                        |  5 +++
 drivers/soc/renesas/Makefile                       |  1 +
 drivers/soc/renesas/r8a77965-sysc.c                | 37 ++++++++++++++++++++++
 drivers/soc/renesas/rcar-sysc.c                    |  3 ++
 drivers/soc/renesas/rcar-sysc.h                    |  1 +
 include/dt-bindings/power/r8a77965-sysc.h          | 30 ++++++++++++++++++
 7 files changed, 78 insertions(+)
 create mode 100644 drivers/soc/renesas/r8a77965-sysc.c
 create mode 100644 include/dt-bindings/power/r8a77965-sysc.h

diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
index 6284a9550b3c..ab399e559257 100644
--- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
+++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
@@ -17,6 +17,7 @@ Required properties:
       - "renesas,r8a7794-sysc" (R-Car E2)
       - "renesas,r8a7795-sysc" (R-Car H3)
       - "renesas,r8a7796-sysc" (R-Car M3-W)
+      - "renesas,r8a77965-sysc" (R-Car M3-N)
       - "renesas,r8a77970-sysc" (R-Car V3M)
       - "renesas,r8a77980-sysc" (R-Car V3H)
       - "renesas,r8a77995-sysc" (R-Car D3)
diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index 6caa393e3a2d..7106a6330210 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -14,6 +14,7 @@ config SOC_RENESAS
 	select SYSC_R8A7794 if ARCH_R8A7794
 	select SYSC_R8A7795 if ARCH_R8A7795
 	select SYSC_R8A7796 if ARCH_R8A7796
+	select SYSC_R8A77965 if ARCH_R8A77965
 	select SYSC_R8A77970 if ARCH_R8A77970
 	select SYSC_R8A77980 if ARCH_R8A77980
 	select SYSC_R8A77995 if ARCH_R8A77995
@@ -57,6 +58,10 @@ config SYSC_R8A7796
 	bool "R-Car M3-W System Controller support" if COMPILE_TEST
 	select SYSC_RCAR
 
+config SYSC_R8A77965
+	bool "R-Car M3-N System Controller support" if COMPILE_TEST
+	select SYSC_RCAR
+
 config SYSC_R8A77970
 	bool "R-Car V3M System Controller support" if COMPILE_TEST
 	select SYSC_RCAR
diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile
index d3b7bb3284c0..ccb5ec57a262 100644
--- a/drivers/soc/renesas/Makefile
+++ b/drivers/soc/renesas/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_SYSC_R8A7792)	+= r8a7792-sysc.o
 obj-$(CONFIG_SYSC_R8A7794)	+= r8a7794-sysc.o
 obj-$(CONFIG_SYSC_R8A7795)	+= r8a7795-sysc.o
 obj-$(CONFIG_SYSC_R8A7796)	+= r8a7796-sysc.o
+obj-$(CONFIG_SYSC_R8A77965)	+= r8a77965-sysc.o
 obj-$(CONFIG_SYSC_R8A77970)	+= r8a77970-sysc.o
 obj-$(CONFIG_SYSC_R8A77980)	+= r8a77980-sysc.o
 obj-$(CONFIG_SYSC_R8A77995)	+= r8a77995-sysc.o
diff --git a/drivers/soc/renesas/r8a77965-sysc.c b/drivers/soc/renesas/r8a77965-sysc.c
new file mode 100644
index 000000000000..d7f7928e3c07
--- /dev/null
+++ b/drivers/soc/renesas/r8a77965-sysc.c
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas R-Car M3-N System Controller
+ * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ *
+ * Based on Renesas R-Car M3-W System Controller
+ * Copyright (C) 2016 Glider bvba
+ */
+
+#include <linux/bug.h>
+#include <linux/kernel.h>
+
+#include <dt-bindings/power/r8a77965-sysc.h>
+
+#include "rcar-sysc.h"
+
+static const struct rcar_sysc_area r8a77965_areas[] __initconst = {
+	{ "always-on",	    0, 0, R8A77965_PD_ALWAYS_ON, -1, PD_ALWAYS_ON },
+	{ "ca57-scu",	0x1c0, 0, R8A77965_PD_CA57_SCU,	R8A77965_PD_ALWAYS_ON,
+	  PD_SCU },
+	{ "ca57-cpu0",	 0x80, 0, R8A77965_PD_CA57_CPU0, R8A77965_PD_CA57_SCU,
+	  PD_CPU_NOCR },
+	{ "ca57-cpu1",	 0x80, 1, R8A77965_PD_CA57_CPU1, R8A77965_PD_CA57_SCU,
+	  PD_CPU_NOCR },
+	{ "cr7",	0x240, 0, R8A77965_PD_CR7,	R8A77965_PD_ALWAYS_ON },
+	{ "a3vc",	0x380, 0, R8A77965_PD_A3VC,	R8A77965_PD_ALWAYS_ON },
+	{ "a3vp",	0x340, 0, R8A77965_PD_A3VP,	R8A77965_PD_ALWAYS_ON },
+	{ "a2vc1",	0x3c0, 1, R8A77965_PD_A2VC1,	R8A77965_PD_A3VC },
+	{ "3dg-a",	0x100, 0, R8A77965_PD_3DG_A,	R8A77965_PD_ALWAYS_ON },
+	{ "3dg-b",	0x100, 1, R8A77965_PD_3DG_B,	R8A77965_PD_3DG_A },
+	{ "a3ir",	0x180, 0, R8A77965_PD_A3IR,	R8A77965_PD_ALWAYS_ON },
+};
+
+const struct rcar_sysc_info r8a77965_sysc_info __initconst = {
+	.areas = r8a77965_areas,
+	.num_areas = ARRAY_SIZE(r8a77965_areas),
+};
diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c
index 72b0f4a9ad4e..faf20e719361 100644
--- a/drivers/soc/renesas/rcar-sysc.c
+++ b/drivers/soc/renesas/rcar-sysc.c
@@ -284,6 +284,9 @@ static const struct of_device_id rcar_sysc_matches[] __initconst = {
 #ifdef CONFIG_SYSC_R8A7796
 	{ .compatible = "renesas,r8a7796-sysc", .data = &r8a7796_sysc_info },
 #endif
+#ifdef CONFIG_SYSC_R8A77965
+	{ .compatible = "renesas,r8a77965-sysc", .data = &r8a77965_sysc_info },
+#endif
 #ifdef CONFIG_SYSC_R8A77970
 	{ .compatible = "renesas,r8a77970-sysc", .data = &r8a77970_sysc_info },
 #endif
diff --git a/drivers/soc/renesas/rcar-sysc.h b/drivers/soc/renesas/rcar-sysc.h
index 974b18619c08..dcdc9ec8eba7 100644
--- a/drivers/soc/renesas/rcar-sysc.h
+++ b/drivers/soc/renesas/rcar-sysc.h
@@ -58,6 +58,7 @@ extern const struct rcar_sysc_info r8a7792_sysc_info;
 extern const struct rcar_sysc_info r8a7794_sysc_info;
 extern const struct rcar_sysc_info r8a7795_sysc_info;
 extern const struct rcar_sysc_info r8a7796_sysc_info;
+extern const struct rcar_sysc_info r8a77965_sysc_info;
 extern const struct rcar_sysc_info r8a77970_sysc_info;
 extern const struct rcar_sysc_info r8a77980_sysc_info;
 extern const struct rcar_sysc_info r8a77995_sysc_info;
diff --git a/include/dt-bindings/power/r8a77965-sysc.h b/include/dt-bindings/power/r8a77965-sysc.h
new file mode 100644
index 000000000000..05a4b5917314
--- /dev/null
+++ b/include/dt-bindings/power/r8a77965-sysc.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ * Copyright (C) 2016 Glider bvba
+ */
+
+#ifndef __DT_BINDINGS_POWER_R8A77965_SYSC_H__
+#define __DT_BINDINGS_POWER_R8A77965_SYSC_H__
+
+/*
+ * These power domain indices match the numbers of the interrupt bits
+ * representing the power areas in the various Interrupt Registers
+ * (e.g. SYSCISR, Interrupt Status Register)
+ */
+
+#define R8A77965_PD_CA57_CPU0		 0
+#define R8A77965_PD_CA57_CPU1		 1
+#define R8A77965_PD_A3VP		 9
+#define R8A77965_PD_CA57_SCU		12
+#define R8A77965_PD_CR7			13
+#define R8A77965_PD_A3VC		14
+#define R8A77965_PD_3DG_A		17
+#define R8A77965_PD_3DG_B		18
+#define R8A77965_PD_A3IR		24
+#define R8A77965_PD_A2VC1		26
+
+/* Always-on power area */
+#define R8A77965_PD_ALWAYS_ON		32
+
+#endif /* __DT_BINDINGS_POWER_R8A77965_SYSC_H__ */
-- 
2.11.0

[PATCH 09/14] soc: renesas: rcar-sysc: Add R-Car M3-N support

[Simon Horman]

From: Jacopo Mondi <jacopo+renesas@jmondi.org>

Add support for R-Car M3-N (R8A77965) power areas.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 .../bindings/power/renesas,rcar-sysc.txt           |  1 +
 drivers/soc/renesas/Kconfig                        |  5 +++
 drivers/soc/renesas/Makefile                       |  1 +
 drivers/soc/renesas/r8a77965-sysc.c                | 37 ++++++++++++++++++++++
 drivers/soc/renesas/rcar-sysc.c                    |  3 ++
 drivers/soc/renesas/rcar-sysc.h                    |  1 +
 include/dt-bindings/power/r8a77965-sysc.h          | 30 ++++++++++++++++++
 7 files changed, 78 insertions(+)
 create mode 100644 drivers/soc/renesas/r8a77965-sysc.c
 create mode 100644 include/dt-bindings/power/r8a77965-sysc.h

diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
index 6284a9550b3c..ab399e559257 100644
--- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
+++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
@@ -17,6 +17,7 @@ Required properties:
       - "renesas,r8a7794-sysc" (R-Car E2)
       - "renesas,r8a7795-sysc" (R-Car H3)
       - "renesas,r8a7796-sysc" (R-Car M3-W)
+      - "renesas,r8a77965-sysc" (R-Car M3-N)
       - "renesas,r8a77970-sysc" (R-Car V3M)
       - "renesas,r8a77980-sysc" (R-Car V3H)
       - "renesas,r8a77995-sysc" (R-Car D3)
diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index 6caa393e3a2d..7106a6330210 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -14,6 +14,7 @@ config SOC_RENESAS
 	select SYSC_R8A7794 if ARCH_R8A7794
 	select SYSC_R8A7795 if ARCH_R8A7795
 	select SYSC_R8A7796 if ARCH_R8A7796
+	select SYSC_R8A77965 if ARCH_R8A77965
 	select SYSC_R8A77970 if ARCH_R8A77970
 	select SYSC_R8A77980 if ARCH_R8A77980
 	select SYSC_R8A77995 if ARCH_R8A77995
@@ -57,6 +58,10 @@ config SYSC_R8A7796
 	bool "R-Car M3-W System Controller support" if COMPILE_TEST
 	select SYSC_RCAR
 
+config SYSC_R8A77965
+	bool "R-Car M3-N System Controller support" if COMPILE_TEST
+	select SYSC_RCAR
+
 config SYSC_R8A77970
 	bool "R-Car V3M System Controller support" if COMPILE_TEST
 	select SYSC_RCAR
diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile
index d3b7bb3284c0..ccb5ec57a262 100644
--- a/drivers/soc/renesas/Makefile
+++ b/drivers/soc/renesas/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_SYSC_R8A7792)	+= r8a7792-sysc.o
 obj-$(CONFIG_SYSC_R8A7794)	+= r8a7794-sysc.o
 obj-$(CONFIG_SYSC_R8A7795)	+= r8a7795-sysc.o
 obj-$(CONFIG_SYSC_R8A7796)	+= r8a7796-sysc.o
+obj-$(CONFIG_SYSC_R8A77965)	+= r8a77965-sysc.o
 obj-$(CONFIG_SYSC_R8A77970)	+= r8a77970-sysc.o
 obj-$(CONFIG_SYSC_R8A77980)	+= r8a77980-sysc.o
 obj-$(CONFIG_SYSC_R8A77995)	+= r8a77995-sysc.o
diff --git a/drivers/soc/renesas/r8a77965-sysc.c b/drivers/soc/renesas/r8a77965-sysc.c
new file mode 100644
index 000000000000..d7f7928e3c07
--- /dev/null
+++ b/drivers/soc/renesas/r8a77965-sysc.c
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas R-Car M3-N System Controller
+ * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ *
+ * Based on Renesas R-Car M3-W System Controller
+ * Copyright (C) 2016 Glider bvba
+ */
+
+#include <linux/bug.h>
+#include <linux/kernel.h>
+
+#include <dt-bindings/power/r8a77965-sysc.h>
+
+#include "rcar-sysc.h"
+
+static const struct rcar_sysc_area r8a77965_areas[] __initconst = {
+	{ "always-on",	    0, 0, R8A77965_PD_ALWAYS_ON, -1, PD_ALWAYS_ON },
+	{ "ca57-scu",	0x1c0, 0, R8A77965_PD_CA57_SCU,	R8A77965_PD_ALWAYS_ON,
+	  PD_SCU },
+	{ "ca57-cpu0",	 0x80, 0, R8A77965_PD_CA57_CPU0, R8A77965_PD_CA57_SCU,
+	  PD_CPU_NOCR },
+	{ "ca57-cpu1",	 0x80, 1, R8A77965_PD_CA57_CPU1, R8A77965_PD_CA57_SCU,
+	  PD_CPU_NOCR },
+	{ "cr7",	0x240, 0, R8A77965_PD_CR7,	R8A77965_PD_ALWAYS_ON },
+	{ "a3vc",	0x380, 0, R8A77965_PD_A3VC,	R8A77965_PD_ALWAYS_ON },
+	{ "a3vp",	0x340, 0, R8A77965_PD_A3VP,	R8A77965_PD_ALWAYS_ON },
+	{ "a2vc1",	0x3c0, 1, R8A77965_PD_A2VC1,	R8A77965_PD_A3VC },
+	{ "3dg-a",	0x100, 0, R8A77965_PD_3DG_A,	R8A77965_PD_ALWAYS_ON },
+	{ "3dg-b",	0x100, 1, R8A77965_PD_3DG_B,	R8A77965_PD_3DG_A },
+	{ "a3ir",	0x180, 0, R8A77965_PD_A3IR,	R8A77965_PD_ALWAYS_ON },
+};
+
+const struct rcar_sysc_info r8a77965_sysc_info __initconst = {
+	.areas = r8a77965_areas,
+	.num_areas = ARRAY_SIZE(r8a77965_areas),
+};
diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c
index 72b0f4a9ad4e..faf20e719361 100644
--- a/drivers/soc/renesas/rcar-sysc.c
+++ b/drivers/soc/renesas/rcar-sysc.c
@@ -284,6 +284,9 @@ static const struct of_device_id rcar_sysc_matches[] __initconst = {
 #ifdef CONFIG_SYSC_R8A7796
 	{ .compatible = "renesas,r8a7796-sysc", .data = &r8a7796_sysc_info },
 #endif
+#ifdef CONFIG_SYSC_R8A77965
+	{ .compatible = "renesas,r8a77965-sysc", .data = &r8a77965_sysc_info },
+#endif
 #ifdef CONFIG_SYSC_R8A77970
 	{ .compatible = "renesas,r8a77970-sysc", .data = &r8a77970_sysc_info },
 #endif
diff --git a/drivers/soc/renesas/rcar-sysc.h b/drivers/soc/renesas/rcar-sysc.h
index 974b18619c08..dcdc9ec8eba7 100644
--- a/drivers/soc/renesas/rcar-sysc.h
+++ b/drivers/soc/renesas/rcar-sysc.h
@@ -58,6 +58,7 @@ extern const struct rcar_sysc_info r8a7792_sysc_info;
 extern const struct rcar_sysc_info r8a7794_sysc_info;
 extern const struct rcar_sysc_info r8a7795_sysc_info;
 extern const struct rcar_sysc_info r8a7796_sysc_info;
+extern const struct rcar_sysc_info r8a77965_sysc_info;
 extern const struct rcar_sysc_info r8a77970_sysc_info;
 extern const struct rcar_sysc_info r8a77980_sysc_info;
 extern const struct rcar_sysc_info r8a77995_sysc_info;
diff --git a/include/dt-bindings/power/r8a77965-sysc.h b/include/dt-bindings/power/r8a77965-sysc.h
new file mode 100644
index 000000000000..05a4b5917314
--- /dev/null
+++ b/include/dt-bindings/power/r8a77965-sysc.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ * Copyright (C) 2016 Glider bvba
+ */
+
+#ifndef __DT_BINDINGS_POWER_R8A77965_SYSC_H__
+#define __DT_BINDINGS_POWER_R8A77965_SYSC_H__
+
+/*
+ * These power domain indices match the numbers of the interrupt bits
+ * representing the power areas in the various Interrupt Registers
+ * (e.g. SYSCISR, Interrupt Status Register)
+ */
+
+#define R8A77965_PD_CA57_CPU0		 0
+#define R8A77965_PD_CA57_CPU1		 1
+#define R8A77965_PD_A3VP		 9
+#define R8A77965_PD_CA57_SCU		12
+#define R8A77965_PD_CR7			13
+#define R8A77965_PD_A3VC		14
+#define R8A77965_PD_3DG_A		17
+#define R8A77965_PD_3DG_B		18
+#define R8A77965_PD_A3IR		24
+#define R8A77965_PD_A2VC1		26
+
+/* Always-on power area */
+#define R8A77965_PD_ALWAYS_ON		32
+
+#endif /* __DT_BINDINGS_POWER_R8A77965_SYSC_H__ */
-- 
2.11.0

[PATCH 10/14] ARM: shmobile: stout: enable R-Car Gen2 regulator quirk

[Simon Horman]

From: Marek Vasut <marek.vasut@gmail.com>

Regulator setup is suboptimal on H2 Stout too. The Stout newly has
two DA9210 regulators, so the quirk is extended to handle another
DA9210 at i2c address 0x70.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c | 23 +++++++++++++++-------
 1 file changed, 16 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
index 44438f344dc8..27fb3a5ec73e 100644
--- a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
@@ -1,9 +1,9 @@
 /*
  * R-Car Generation 2 da9063/da9210 regulator quirk
  *
- * The r8a7790/lager and r8a7791/koelsch development boards have da9063 and
- * da9210 regulators.  Both regulators have their interrupt request lines tied
- * to the same interrupt pin (IRQ2) on the SoC.
+ * Certain Gen2 development boards have an da9063 and one or more da9210
+ * regulators. All of these regulators have their interrupt request lines
+ * tied to the same interrupt pin (IRQ2) on the SoC.
  *
  * After cold boot or da9063-induced restart, both the da9063 and da9210 seem
  * to assert their interrupt request lines.  Hence as soon as one driver
@@ -50,7 +50,7 @@ static void __iomem *irqc;
 static u8 da9063_irq_clr[] = { DA9063_REG_IRQ_MASK_A, 0xff, 0xff, 0xff, 0xff };
 static u8 da9210_irq_clr[] = { DA9210_REG_MASK_A, 0xff, 0xff };
 
-static struct i2c_msg da9xxx_msgs[2] = {
+static struct i2c_msg da9xxx_msgs[3] = {
 	{
 		.addr = 0x58,
 		.len = ARRAY_SIZE(da9063_irq_clr),
@@ -59,6 +59,10 @@ static struct i2c_msg da9xxx_msgs[2] = {
 		.addr = 0x68,
 		.len = ARRAY_SIZE(da9210_irq_clr),
 		.buf = da9210_irq_clr,
+	}, {
+		.addr = 0x70,
+		.len = ARRAY_SIZE(da9210_irq_clr),
+		.buf = da9210_irq_clr,
 	},
 };
 
@@ -85,11 +89,15 @@ static int regulator_quirk_notify(struct notifier_block *nb,
 	dev_dbg(dev, "Detected %s\n", client->name);
 
 	if ((client->addr == 0x58 && !strcmp(client->name, "da9063")) ||
-	    (client->addr == 0x68 && !strcmp(client->name, "da9210"))) {
-		int ret;
+	    (client->addr == 0x68 && !strcmp(client->name, "da9210")) ||
+	    (client->addr == 0x70 && !strcmp(client->name, "da9210"))) {
+		int ret, len;
+
+		/* There are two DA9210 on Stout, one on the other boards. */
+		len = of_machine_is_compatible("renesas,stout") ? 3 : 2;
 
 		dev_info(&client->dev, "clearing da9063/da9210 interrupts\n");
-		ret = i2c_transfer(client->adapter, da9xxx_msgs, ARRAY_SIZE(da9xxx_msgs));
+		ret = i2c_transfer(client->adapter, da9xxx_msgs, len);
 		if (ret != ARRAY_SIZE(da9xxx_msgs))
 			dev_err(&client->dev, "i2c error %d\n", ret);
 	}
@@ -118,6 +126,7 @@ static int __init rcar_gen2_regulator_quirk(void)
 
 	if (!of_machine_is_compatible("renesas,koelsch") &&
 	    !of_machine_is_compatible("renesas,lager") &&
+	    !of_machine_is_compatible("renesas,stout") &&
 	    !of_machine_is_compatible("renesas,gose"))
 		return -ENODEV;
 
-- 
2.11.0

[PATCH 10/14] ARM: shmobile: stout: enable R-Car Gen2 regulator quirk

[Simon Horman]

From: Marek Vasut <marek.vasut@gmail.com>

Regulator setup is suboptimal on H2 Stout too. The Stout newly has
two DA9210 regulators, so the quirk is extended to handle another
DA9210 at i2c address 0x70.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c | 23 +++++++++++++++-------
 1 file changed, 16 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
index 44438f344dc8..27fb3a5ec73e 100644
--- a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
@@ -1,9 +1,9 @@
 /*
  * R-Car Generation 2 da9063/da9210 regulator quirk
  *
- * The r8a7790/lager and r8a7791/koelsch development boards have da9063 and
- * da9210 regulators.  Both regulators have their interrupt request lines tied
- * to the same interrupt pin (IRQ2) on the SoC.
+ * Certain Gen2 development boards have an da9063 and one or more da9210
+ * regulators. All of these regulators have their interrupt request lines
+ * tied to the same interrupt pin (IRQ2) on the SoC.
  *
  * After cold boot or da9063-induced restart, both the da9063 and da9210 seem
  * to assert their interrupt request lines.  Hence as soon as one driver
@@ -50,7 +50,7 @@ static void __iomem *irqc;
 static u8 da9063_irq_clr[] = { DA9063_REG_IRQ_MASK_A, 0xff, 0xff, 0xff, 0xff };
 static u8 da9210_irq_clr[] = { DA9210_REG_MASK_A, 0xff, 0xff };
 
-static struct i2c_msg da9xxx_msgs[2] = {
+static struct i2c_msg da9xxx_msgs[3] = {
 	{
 		.addr = 0x58,
 		.len = ARRAY_SIZE(da9063_irq_clr),
@@ -59,6 +59,10 @@ static struct i2c_msg da9xxx_msgs[2] = {
 		.addr = 0x68,
 		.len = ARRAY_SIZE(da9210_irq_clr),
 		.buf = da9210_irq_clr,
+	}, {
+		.addr = 0x70,
+		.len = ARRAY_SIZE(da9210_irq_clr),
+		.buf = da9210_irq_clr,
 	},
 };
 
@@ -85,11 +89,15 @@ static int regulator_quirk_notify(struct notifier_block *nb,
 	dev_dbg(dev, "Detected %s\n", client->name);
 
 	if ((client->addr == 0x58 && !strcmp(client->name, "da9063")) ||
-	    (client->addr == 0x68 && !strcmp(client->name, "da9210"))) {
-		int ret;
+	    (client->addr == 0x68 && !strcmp(client->name, "da9210")) ||
+	    (client->addr == 0x70 && !strcmp(client->name, "da9210"))) {
+		int ret, len;
+
+		/* There are two DA9210 on Stout, one on the other boards. */
+		len = of_machine_is_compatible("renesas,stout") ? 3 : 2;
 
 		dev_info(&client->dev, "clearing da9063/da9210 interrupts\n");
-		ret = i2c_transfer(client->adapter, da9xxx_msgs, ARRAY_SIZE(da9xxx_msgs));
+		ret = i2c_transfer(client->adapter, da9xxx_msgs, len);
 		if (ret != ARRAY_SIZE(da9xxx_msgs))
 			dev_err(&client->dev, "i2c error %d\n", ret);
 	}
@@ -118,6 +126,7 @@ static int __init rcar_gen2_regulator_quirk(void)
 
 	if (!of_machine_is_compatible("renesas,koelsch") &&
 	    !of_machine_is_compatible("renesas,lager") &&
+	    !of_machine_is_compatible("renesas,stout") &&
 	    !of_machine_is_compatible("renesas,gose"))
 		return -ENODEV;
 
-- 
2.11.0

[PATCH 11/14] soc: renesas: rcar-rst: Add support for R-Car M3-N

[Simon Horman]

From: Jacopo Mondi <jacopo+renesas@jmondi.org>

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 Documentation/devicetree/bindings/reset/renesas,rst.txt | 1 +
 drivers/soc/renesas/Kconfig                             | 4 ++--
 drivers/soc/renesas/rcar-rst.c                          | 1 +
 3 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.txt b/Documentation/devicetree/bindings/reset/renesas,rst.txt
index a55b88658446..294a0dae106a 100644
--- a/Documentation/devicetree/bindings/reset/renesas,rst.txt
+++ b/Documentation/devicetree/bindings/reset/renesas,rst.txt
@@ -26,6 +26,7 @@ Required properties:
 		  - "renesas,r8a7794-rst" (R-Car E2)
 		  - "renesas,r8a7795-rst" (R-Car H3)
 		  - "renesas,r8a7796-rst" (R-Car M3-W)
+		  - "renesas,r8a77965-rst" (R-Car M3-N)
 		  - "renesas,r8a77970-rst" (R-Car V3M)
 		  - "renesas,r8a77980-rst" (R-Car V3H)
 		  - "renesas,r8a77995-rst" (R-Car D3)
diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index 7106a6330210..3bbe6114a420 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -3,8 +3,8 @@ config SOC_RENESAS
 	default y if ARCH_RENESAS
 	select SOC_BUS
 	select RST_RCAR if ARCH_RCAR_GEN1 || ARCH_RCAR_GEN2 || \
-			   ARCH_R8A7795 || ARCH_R8A7796 || ARCH_R8A77970 || \
-			   ARCH_R8A77980 || ARCH_R8A77995
+			   ARCH_R8A7795 || ARCH_R8A7796 || ARCH_R8A77965 || \
+			   ARCH_R8A77970 || ARCH_R8A77980 || ARCH_R8A77995
 	select SYSC_R8A7743 if ARCH_R8A7743
 	select SYSC_R8A7745 if ARCH_R8A7745
 	select SYSC_R8A7779 if ARCH_R8A7779
diff --git a/drivers/soc/renesas/rcar-rst.c b/drivers/soc/renesas/rcar-rst.c
index 34136664ece4..8e9cb7996ab0 100644
--- a/drivers/soc/renesas/rcar-rst.c
+++ b/drivers/soc/renesas/rcar-rst.c
@@ -56,6 +56,7 @@ static const struct of_device_id rcar_rst_matches[] __initconst = {
 	/* R-Car Gen3 */
 	{ .compatible = "renesas,r8a7795-rst", .data = &rcar_rst_gen3 },
 	{ .compatible = "renesas,r8a7796-rst", .data = &rcar_rst_gen3 },
+	{ .compatible = "renesas,r8a77965-rst", .data = &rcar_rst_gen3 },
 	{ .compatible = "renesas,r8a77970-rst", .data = &rcar_rst_gen3 },
 	{ .compatible = "renesas,r8a77980-rst", .data = &rcar_rst_gen3 },
 	{ .compatible = "renesas,r8a77995-rst", .data = &rcar_rst_gen3 },
-- 
2.11.0

[PATCH 11/14] soc: renesas: rcar-rst: Add support for R-Car M3-N

[Simon Horman]

From: Jacopo Mondi <jacopo+renesas@jmondi.org>

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 Documentation/devicetree/bindings/reset/renesas,rst.txt | 1 +
 drivers/soc/renesas/Kconfig                             | 4 ++--
 drivers/soc/renesas/rcar-rst.c                          | 1 +
 3 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.txt b/Documentation/devicetree/bindings/reset/renesas,rst.txt
index a55b88658446..294a0dae106a 100644
--- a/Documentation/devicetree/bindings/reset/renesas,rst.txt
+++ b/Documentation/devicetree/bindings/reset/renesas,rst.txt
@@ -26,6 +26,7 @@ Required properties:
 		  - "renesas,r8a7794-rst" (R-Car E2)
 		  - "renesas,r8a7795-rst" (R-Car H3)
 		  - "renesas,r8a7796-rst" (R-Car M3-W)
+		  - "renesas,r8a77965-rst" (R-Car M3-N)
 		  - "renesas,r8a77970-rst" (R-Car V3M)
 		  - "renesas,r8a77980-rst" (R-Car V3H)
 		  - "renesas,r8a77995-rst" (R-Car D3)
diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index 7106a6330210..3bbe6114a420 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -3,8 +3,8 @@ config SOC_RENESAS
 	default y if ARCH_RENESAS
 	select SOC_BUS
 	select RST_RCAR if ARCH_RCAR_GEN1 || ARCH_RCAR_GEN2 || \
-			   ARCH_R8A7795 || ARCH_R8A7796 || ARCH_R8A77970 || \
-			   ARCH_R8A77980 || ARCH_R8A77995
+			   ARCH_R8A7795 || ARCH_R8A7796 || ARCH_R8A77965 || \
+			   ARCH_R8A77970 || ARCH_R8A77980 || ARCH_R8A77995
 	select SYSC_R8A7743 if ARCH_R8A7743
 	select SYSC_R8A7745 if ARCH_R8A7745
 	select SYSC_R8A7779 if ARCH_R8A7779
diff --git a/drivers/soc/renesas/rcar-rst.c b/drivers/soc/renesas/rcar-rst.c
index 34136664ece4..8e9cb7996ab0 100644
--- a/drivers/soc/renesas/rcar-rst.c
+++ b/drivers/soc/renesas/rcar-rst.c
@@ -56,6 +56,7 @@ static const struct of_device_id rcar_rst_matches[] __initconst = {
 	/* R-Car Gen3 */
 	{ .compatible = "renesas,r8a7795-rst", .data = &rcar_rst_gen3 },
 	{ .compatible = "renesas,r8a7796-rst", .data = &rcar_rst_gen3 },
+	{ .compatible = "renesas,r8a77965-rst", .data = &rcar_rst_gen3 },
 	{ .compatible = "renesas,r8a77970-rst", .data = &rcar_rst_gen3 },
 	{ .compatible = "renesas,r8a77980-rst", .data = &rcar_rst_gen3 },
 	{ .compatible = "renesas,r8a77995-rst", .data = &rcar_rst_gen3 },
-- 
2.11.0

[GIT PULL] Renesas ARM Based SoC Updates for v4.17

[Simon Horman]

Hi Olof, Hi Kevin, Hi Arnd,

Please consider these Renesas ARM based SoC updates for v4.17.


The following changes since commit 7928b2cbe55b2a410a0f5c1f154610059c57b1b2:

  Linux 4.16-rc1 (2018-02-11 15:04:29 -0800)

are available in the git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-soc-for-v4.17

for you to fetch changes up to 01d675f159e0f0792947fb823cf2425da4d747ad:

  ARM: shmobile: rcar-gen2: Add watchdog support (2018-03-13 20:54:16 +0100)

----------------------------------------------------------------
Renesas ARM Based SoC Updates for v4.17

01d675f159e0 ARM: shmobile: rcar-gen2: Add watchdog support
58adf1ba0d22 ARM: shmobile: Add watchdog support

* SoC
  - Identify R-Car V3H (r8a77980) and M3N (r8a77965)

  - Enable R-Car Gen2 regulator quirk for Stout board with H3 (r8a7790) SoC

    Marek Vaust says "Regulator setup is suboptimal on H2 Stout too. The
    Stout newly has two DA9210 regulators, so the quirk is extended to
    handle another DA9210 at i2c address 0x70."

  - Add watchdog support

    This is the SoC portion of the following solution. It is not yet
    enabled in DT as it is not functional without clock dependencies
    in place.

    Fabrizio Castro says "this series has been around for some time as RFC,
    and it has collected useful comments from the community along the way.
    The solution proposed by this patch set works for most R-Car Gen2 and
    RZ/G1 devices, but not all of them. We now know that for some R-Car
    Gen2 early revisions there is no proper software fix. Anyway, no
    product has been built around early revisions, but development boards
    mounting early revisions (basically prototypes) are still out there.
    As a result, this series isn't enabling the internal watchdog on R-Car
    Gen2 boards, developers may enable it in board specific device trees if
    needed.  This series has been tested by me on the iwg20d, iwg22d,
    Lager, Alt, and Koelsch boards.

   The problem
   ===========
   To deal with SMP on R-Car Gen2 and RZ/G1, we install a reset vector to
   ICRAM1 and we program the [S]BAR registers so that when we turn ON the
   non-boot CPUs they are redirected to the reset vector installed by Linux
   in ICRAM1, and eventually they continue the execution to RAM, where the
   SMP bring-up code will take care of the rest.  The content of the [S]BAR
   registers survives a watchdog triggered reset, and as such after the
   watchdog fires the boot core will try and execute the SMP bring-up code
   instead of jumping to the bootrom code.

   The fix
   =======
   The main strategy for the solution is to let the reset vector decide if
   it needs to jump to shmobile_boot_fn or to the bootrom code.  In a
   watchdog triggered reset scenario, since the [S]BAR registers keep their
   values, the boot CPU will jump into the newly designed reset vector, the
   assembly routine will eventually test WOVF (a bit in register RWTCSRA
   that indicates if the watchdog counter has overflown, the value of this
   bit gets retained in this scenario), and jump to the bootrom code which
   will in turn load up the bootloader, etc.  When bringing up SMP or using
   CPU hotplug, the reset vector will jump to shmobile_boot_fn instead."

* R-Car Rst
  - Add support for R-Car V3H (r8a77980) and V3H (r8a77980)

* R-Car SYSC
  - Mark rcar_sysc_matches[] __initconst

   Geert Uytterhoeven says "This frees another 1764 bytes
   (arm32/shmobile_defconfig) or 1000 bytes (arm64/renesas_defconfig) of
   memory after kernel init."

  - Fix power area parents

    Sergei Shtylyov says "According to the figure 9.2(b) of the R-Car
    Series, 3rd Generation User’s Manual: Hardware Rev. 0.80 the A2IRn and
    A2SCn power areas in R8A77970 have the A3IR area as a parent, thus the
    SYSC driver has those parents wrong.."

  - Add support for R-Car V3H (r8a77980) and V3H (r8a77980)

----------------------------------------------------------------
Fabrizio Castro (3):
      soc: renesas: rcar-rst: Enable watchdog as reset trigger for Gen2
      ARM: shmobile: Add watchdog support
      ARM: shmobile: rcar-gen2: Add watchdog support

Geert Uytterhoeven (2):
      soc: renesas: rcar-sysc: Mark rcar_sysc_matches[] __initconst
      ARM: shmobile: rcar-gen2: Fix error check in regulator quirk

Jacopo Mondi (3):
      soc: renesas: Identify R-Car M3-N
      soc: renesas: rcar-sysc: Add R-Car M3-N support
      soc: renesas: rcar-rst: Add support for R-Car M3-N

Marek Vasut (1):
      ARM: shmobile: stout: enable R-Car Gen2 regulator quirk

Sergei Shtylyov (5):
      soc: renesas: identify R-Car V3H
      soc: renesas: rcar-rst: add R8A77980 support
      soc: renesas: r8a77970-sysc: fix power area parents
      dt-bindings: power: add R8A77980 SYSC power domain definitions
      soc: renesas: rcar-sysc: add R8A77980 support

 .../bindings/power/renesas,rcar-sysc.txt           |  2 +
 .../devicetree/bindings/reset/renesas,rst.txt      |  2 +
 arch/arm/mach-shmobile/common.h                    |  4 ++
 arch/arm/mach-shmobile/headsmp.S                   | 55 ++++++++++++++++++++++
 arch/arm/mach-shmobile/platsmp-apmu.c              |  1 +
 arch/arm/mach-shmobile/pm-rcar-gen2.c              | 15 ++++--
 arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c | 25 ++++++----
 drivers/soc/renesas/Kconfig                        | 14 +++++-
 drivers/soc/renesas/Makefile                       |  2 +
 drivers/soc/renesas/r8a77965-sysc.c                | 37 +++++++++++++++
 drivers/soc/renesas/r8a77970-sysc.c                | 12 ++---
 drivers/soc/renesas/r8a77980-sysc.c                | 52 ++++++++++++++++++++
 drivers/soc/renesas/rcar-rst.c                     | 37 ++++++++++++---
 drivers/soc/renesas/rcar-sysc.c                    |  8 +++-
 drivers/soc/renesas/rcar-sysc.h                    |  2 +
 drivers/soc/renesas/renesas-soc.c                  | 16 +++++++
 include/dt-bindings/power/r8a77965-sysc.h          | 30 ++++++++++++
 include/dt-bindings/power/r8a77980-sysc.h          | 43 +++++++++++++++++
 18 files changed, 331 insertions(+), 26 deletions(-)
 create mode 100644 drivers/soc/renesas/r8a77965-sysc.c
 create mode 100644 drivers/soc/renesas/r8a77980-sysc.c
 create mode 100644 include/dt-bindings/power/r8a77965-sysc.h
 create mode 100644 include/dt-bindings/power/r8a77980-sysc.h

[PATCH 12/14] ARM: shmobile: rcar-gen2: Fix error check in regulator quirk

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

On systems with two regulators, a bogus error message is printed on
success:

    i2c 6-0058: i2c error 2

While adding support for Stout, the number of messages to send was
made variable, but the corresponding return value check of
i2c_transfer() wasn't updated.

Fixes: ff938cd14d67a704 ("ARM: shmobile: stout: enable R-Car Gen2 regulator quirk")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
index 27fb3a5ec73e..93f628acfd94 100644
--- a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
@@ -98,7 +98,7 @@ static int regulator_quirk_notify(struct notifier_block *nb,
 
 		dev_info(&client->dev, "clearing da9063/da9210 interrupts\n");
 		ret = i2c_transfer(client->adapter, da9xxx_msgs, len);
-		if (ret != ARRAY_SIZE(da9xxx_msgs))
+		if (ret != len)
 			dev_err(&client->dev, "i2c error %d\n", ret);
 	}
 
-- 
2.11.0

[GIT PULL] Renesas ARM Based SoC Updates for v4.17

[Simon Horman]

Hi Olof, Hi Kevin, Hi Arnd,

Please consider these Renesas ARM based SoC updates for v4.17.


The following changes since commit 7928b2cbe55b2a410a0f5c1f154610059c57b1b2:

  Linux 4.16-rc1 (2018-02-11 15:04:29 -0800)

are available in the git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-soc-for-v4.17

for you to fetch changes up to 01d675f159e0f0792947fb823cf2425da4d747ad:

  ARM: shmobile: rcar-gen2: Add watchdog support (2018-03-13 20:54:16 +0100)

----------------------------------------------------------------
Renesas ARM Based SoC Updates for v4.17

01d675f159e0 ARM: shmobile: rcar-gen2: Add watchdog support
58adf1ba0d22 ARM: shmobile: Add watchdog support

* SoC
  - Identify R-Car V3H (r8a77980) and M3N (r8a77965)

  - Enable R-Car Gen2 regulator quirk for Stout board with H3 (r8a7790) SoC

    Marek Vaust says "Regulator setup is suboptimal on H2 Stout too. The
    Stout newly has two DA9210 regulators, so the quirk is extended to
    handle another DA9210 at i2c address 0x70."

  - Add watchdog support

    This is the SoC portion of the following solution. It is not yet
    enabled in DT as it is not functional without clock dependencies
    in place.

    Fabrizio Castro says "this series has been around for some time as RFC,
    and it has collected useful comments from the community along the way.
    The solution proposed by this patch set works for most R-Car Gen2 and
    RZ/G1 devices, but not all of them. We now know that for some R-Car
    Gen2 early revisions there is no proper software fix. Anyway, no
    product has been built around early revisions, but development boards
    mounting early revisions (basically prototypes) are still out there.
    As a result, this series isn't enabling the internal watchdog on R-Car
    Gen2 boards, developers may enable it in board specific device trees if
    needed.  This series has been tested by me on the iwg20d, iwg22d,
    Lager, Alt, and Koelsch boards.

   The problem
   ===========
   To deal with SMP on R-Car Gen2 and RZ/G1, we install a reset vector to
   ICRAM1 and we program the [S]BAR registers so that when we turn ON the
   non-boot CPUs they are redirected to the reset vector installed by Linux
   in ICRAM1, and eventually they continue the execution to RAM, where the
   SMP bring-up code will take care of the rest.  The content of the [S]BAR
   registers survives a watchdog triggered reset, and as such after the
   watchdog fires the boot core will try and execute the SMP bring-up code
   instead of jumping to the bootrom code.

   The fix
   =======
   The main strategy for the solution is to let the reset vector decide if
   it needs to jump to shmobile_boot_fn or to the bootrom code.  In a
   watchdog triggered reset scenario, since the [S]BAR registers keep their
   values, the boot CPU will jump into the newly designed reset vector, the
   assembly routine will eventually test WOVF (a bit in register RWTCSRA
   that indicates if the watchdog counter has overflown, the value of this
   bit gets retained in this scenario), and jump to the bootrom code which
   will in turn load up the bootloader, etc.  When bringing up SMP or using
   CPU hotplug, the reset vector will jump to shmobile_boot_fn instead."

* R-Car Rst
  - Add support for R-Car V3H (r8a77980) and V3H (r8a77980)

* R-Car SYSC
  - Mark rcar_sysc_matches[] __initconst

   Geert Uytterhoeven says "This frees another 1764 bytes
   (arm32/shmobile_defconfig) or 1000 bytes (arm64/renesas_defconfig) of
   memory after kernel init."

  - Fix power area parents

    Sergei Shtylyov says "According to the figure 9.2(b) of the R-Car
    Series, 3rd Generation User?s Manual: Hardware Rev. 0.80 the A2IRn and
    A2SCn power areas in R8A77970 have the A3IR area as a parent, thus the
    SYSC driver has those parents wrong.."

  - Add support for R-Car V3H (r8a77980) and V3H (r8a77980)

----------------------------------------------------------------
Fabrizio Castro (3):
      soc: renesas: rcar-rst: Enable watchdog as reset trigger for Gen2
      ARM: shmobile: Add watchdog support
      ARM: shmobile: rcar-gen2: Add watchdog support

Geert Uytterhoeven (2):
      soc: renesas: rcar-sysc: Mark rcar_sysc_matches[] __initconst
      ARM: shmobile: rcar-gen2: Fix error check in regulator quirk

Jacopo Mondi (3):
      soc: renesas: Identify R-Car M3-N
      soc: renesas: rcar-sysc: Add R-Car M3-N support
      soc: renesas: rcar-rst: Add support for R-Car M3-N

Marek Vasut (1):
      ARM: shmobile: stout: enable R-Car Gen2 regulator quirk

Sergei Shtylyov (5):
      soc: renesas: identify R-Car V3H
      soc: renesas: rcar-rst: add R8A77980 support
      soc: renesas: r8a77970-sysc: fix power area parents
      dt-bindings: power: add R8A77980 SYSC power domain definitions
      soc: renesas: rcar-sysc: add R8A77980 support

 .../bindings/power/renesas,rcar-sysc.txt           |  2 +
 .../devicetree/bindings/reset/renesas,rst.txt      |  2 +
 arch/arm/mach-shmobile/common.h                    |  4 ++
 arch/arm/mach-shmobile/headsmp.S                   | 55 ++++++++++++++++++++++
 arch/arm/mach-shmobile/platsmp-apmu.c              |  1 +
 arch/arm/mach-shmobile/pm-rcar-gen2.c              | 15 ++++--
 arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c | 25 ++++++----
 drivers/soc/renesas/Kconfig                        | 14 +++++-
 drivers/soc/renesas/Makefile                       |  2 +
 drivers/soc/renesas/r8a77965-sysc.c                | 37 +++++++++++++++
 drivers/soc/renesas/r8a77970-sysc.c                | 12 ++---
 drivers/soc/renesas/r8a77980-sysc.c                | 52 ++++++++++++++++++++
 drivers/soc/renesas/rcar-rst.c                     | 37 ++++++++++++---
 drivers/soc/renesas/rcar-sysc.c                    |  8 +++-
 drivers/soc/renesas/rcar-sysc.h                    |  2 +
 drivers/soc/renesas/renesas-soc.c                  | 16 +++++++
 include/dt-bindings/power/r8a77965-sysc.h          | 30 ++++++++++++
 include/dt-bindings/power/r8a77980-sysc.h          | 43 +++++++++++++++++
 18 files changed, 331 insertions(+), 26 deletions(-)
 create mode 100644 drivers/soc/renesas/r8a77965-sysc.c
 create mode 100644 drivers/soc/renesas/r8a77980-sysc.c
 create mode 100644 include/dt-bindings/power/r8a77965-sysc.h
 create mode 100644 include/dt-bindings/power/r8a77980-sysc.h

[PATCH 12/14] ARM: shmobile: rcar-gen2: Fix error check in regulator quirk

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

On systems with two regulators, a bogus error message is printed on
success:

    i2c 6-0058: i2c error 2

While adding support for Stout, the number of messages to send was
made variable, but the corresponding return value check of
i2c_transfer() wasn't updated.

Fixes: ff938cd14d67a704 ("ARM: shmobile: stout: enable R-Car Gen2 regulator quirk")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
index 27fb3a5ec73e..93f628acfd94 100644
--- a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
@@ -98,7 +98,7 @@ static int regulator_quirk_notify(struct notifier_block *nb,
 
 		dev_info(&client->dev, "clearing da9063/da9210 interrupts\n");
 		ret = i2c_transfer(client->adapter, da9xxx_msgs, len);
-		if (ret != ARRAY_SIZE(da9xxx_msgs))
+		if (ret != len)
 			dev_err(&client->dev, "i2c error %d\n", ret);
 	}
 
-- 
2.11.0

[PATCH 13/14] ARM: shmobile: Add watchdog support

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

On R-Car Gen2 and RZ/G1 platforms, we use the SBAR registers to make non
boot CPUs run a routine designed to bring up SMP and deal with hot plug.
The value contained in the SBAR registers is not initialized by a WDT
triggered reset, which means that after a WDT triggered reset we jump
to the SMP bring up routine, preventing the system from executing the
bootrom code.

The purpose of this patch is to jump to the bootrom code in case of a
WDT triggered reset, and keep the SMP functionality untouched.
In order to tell if the code had been called due to the WDT overflowing
we are testing WOVF from register RWTCSRA.

The new function shmobile_boot_vector_gen2 isn't replacing
shmobile_boot_vector for backward compatibility reasons. The kernel
will install the best option (either shmobile_boot_vector or
shmobile_boot_vector_gen2) to ICRAM1 after parsing the device tree,
according to the amount of memory available.

Since shmobile_boot_vector has become bigger, "reg" property of nodes
compatible with "renesas,smp-sram" now need to be set to a value
greater or equal to "<0 0x60>".

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
[simon: dropped #ifdef from common.h]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/common.h  |  4 +++
 arch/arm/mach-shmobile/headsmp.S | 55 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 59 insertions(+)

diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h
index a8fa4f7e1f60..43c1ac696274 100644
--- a/arch/arm/mach-shmobile/common.h
+++ b/arch/arm/mach-shmobile/common.h
@@ -7,6 +7,10 @@ extern void shmobile_init_delay(void);
 extern void shmobile_boot_vector(void);
 extern unsigned long shmobile_boot_fn;
 extern unsigned long shmobile_boot_size;
+extern void shmobile_boot_vector_gen2(void);
+extern unsigned long shmobile_boot_fn_gen2;
+extern unsigned long shmobile_boot_cpu_gen2;
+extern unsigned long shmobile_boot_size_gen2;
 extern void shmobile_smp_boot(void);
 extern void shmobile_smp_sleep(void);
 extern void shmobile_smp_hook(unsigned int cpu, unsigned long fn,
diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S
index 32e0bf6e3ccb..cef8e8c555f8 100644
--- a/arch/arm/mach-shmobile/headsmp.S
+++ b/arch/arm/mach-shmobile/headsmp.S
@@ -16,6 +16,11 @@
 #include <asm/assembler.h>
 #include <asm/memory.h>
 
+#define SCTLR_MMU	0x01
+#define BOOTROM_ADDRESS	0xE6340000
+#define RWTCSRA_ADDRESS 0xE6020004
+#define RWTCSRA_WOVF	0x10
+
 /*
  * Reset vector for secondary CPUs.
  * This will be mapped at address 0 by SBAR register.
@@ -37,6 +42,56 @@ shmobile_boot_fn:
 shmobile_boot_size:
 	.long	. - shmobile_boot_vector
 
+#ifdef CONFIG_ARCH_RCAR_GEN2
+/*
+ * Reset vector for R-Car Gen2 and RZ/G1 secondary CPUs.
+ * This will be mapped at address 0 by SBAR register.
+ */
+ENTRY(shmobile_boot_vector_gen2)
+	mrc	p15, 0, r0, c0, c0, 5		@ r0 = MPIDR
+	ldr	r1, shmobile_boot_cpu_gen2
+	cmp	r0, r1
+	bne	shmobile_smp_continue_gen2
+
+	mrc	p15, 0, r1, c1, c0, 0		@ r1 = SCTLR
+	and	r0, r1, #SCTLR_MMU
+	cmp	r0, #SCTLR_MMU
+	beq	shmobile_smp_continue_gen2
+
+	ldr	r0, rwtcsra
+	mov	r1, #0
+	ldrb	r1, [r0]
+	and	r0, r1, #RWTCSRA_WOVF
+	cmp	r0, #RWTCSRA_WOVF
+	bne	shmobile_smp_continue_gen2
+
+	ldr	r0, bootrom
+	bx	r0
+
+shmobile_smp_continue_gen2:
+	ldr     r1, shmobile_boot_fn_gen2
+	bx	r1
+
+ENDPROC(shmobile_boot_vector_gen2)
+
+	.align	4
+rwtcsra:
+	.word	RWTCSRA_ADDRESS
+bootrom:
+	.word	BOOTROM_ADDRESS
+	.globl	shmobile_boot_cpu_gen2
+shmobile_boot_cpu_gen2:
+	.word	0x00000000
+
+	.align	2
+	.globl	shmobile_boot_fn_gen2
+shmobile_boot_fn_gen2:
+	.space	4
+	.globl	shmobile_boot_size_gen2
+shmobile_boot_size_gen2:
+	.long	. - shmobile_boot_vector_gen2
+#endif /* CONFIG_ARCH_RCAR_GEN2 */
+
 /*
  * Per-CPU SMP boot function/argument selection code based on MPIDR
  */
-- 
2.11.0

[PATCH 13/14] ARM: shmobile: Add watchdog support

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

On R-Car Gen2 and RZ/G1 platforms, we use the SBAR registers to make non
boot CPUs run a routine designed to bring up SMP and deal with hot plug.
The value contained in the SBAR registers is not initialized by a WDT
triggered reset, which means that after a WDT triggered reset we jump
to the SMP bring up routine, preventing the system from executing the
bootrom code.

The purpose of this patch is to jump to the bootrom code in case of a
WDT triggered reset, and keep the SMP functionality untouched.
In order to tell if the code had been called due to the WDT overflowing
we are testing WOVF from register RWTCSRA.

The new function shmobile_boot_vector_gen2 isn't replacing
shmobile_boot_vector for backward compatibility reasons. The kernel
will install the best option (either shmobile_boot_vector or
shmobile_boot_vector_gen2) to ICRAM1 after parsing the device tree,
according to the amount of memory available.

Since shmobile_boot_vector has become bigger, "reg" property of nodes
compatible with "renesas,smp-sram" now need to be set to a value
greater or equal to "<0 0x60>".

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
[simon: dropped #ifdef from common.h]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/common.h  |  4 +++
 arch/arm/mach-shmobile/headsmp.S | 55 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 59 insertions(+)

diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h
index a8fa4f7e1f60..43c1ac696274 100644
--- a/arch/arm/mach-shmobile/common.h
+++ b/arch/arm/mach-shmobile/common.h
@@ -7,6 +7,10 @@ extern void shmobile_init_delay(void);
 extern void shmobile_boot_vector(void);
 extern unsigned long shmobile_boot_fn;
 extern unsigned long shmobile_boot_size;
+extern void shmobile_boot_vector_gen2(void);
+extern unsigned long shmobile_boot_fn_gen2;
+extern unsigned long shmobile_boot_cpu_gen2;
+extern unsigned long shmobile_boot_size_gen2;
 extern void shmobile_smp_boot(void);
 extern void shmobile_smp_sleep(void);
 extern void shmobile_smp_hook(unsigned int cpu, unsigned long fn,
diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S
index 32e0bf6e3ccb..cef8e8c555f8 100644
--- a/arch/arm/mach-shmobile/headsmp.S
+++ b/arch/arm/mach-shmobile/headsmp.S
@@ -16,6 +16,11 @@
 #include <asm/assembler.h>
 #include <asm/memory.h>
 
+#define SCTLR_MMU	0x01
+#define BOOTROM_ADDRESS	0xE6340000
+#define RWTCSRA_ADDRESS 0xE6020004
+#define RWTCSRA_WOVF	0x10
+
 /*
  * Reset vector for secondary CPUs.
  * This will be mapped at address 0 by SBAR register.
@@ -37,6 +42,56 @@ shmobile_boot_fn:
 shmobile_boot_size:
 	.long	. - shmobile_boot_vector
 
+#ifdef CONFIG_ARCH_RCAR_GEN2
+/*
+ * Reset vector for R-Car Gen2 and RZ/G1 secondary CPUs.
+ * This will be mapped at address 0 by SBAR register.
+ */
+ENTRY(shmobile_boot_vector_gen2)
+	mrc	p15, 0, r0, c0, c0, 5		@ r0 = MPIDR
+	ldr	r1, shmobile_boot_cpu_gen2
+	cmp	r0, r1
+	bne	shmobile_smp_continue_gen2
+
+	mrc	p15, 0, r1, c1, c0, 0		@ r1 = SCTLR
+	and	r0, r1, #SCTLR_MMU
+	cmp	r0, #SCTLR_MMU
+	beq	shmobile_smp_continue_gen2
+
+	ldr	r0, rwtcsra
+	mov	r1, #0
+	ldrb	r1, [r0]
+	and	r0, r1, #RWTCSRA_WOVF
+	cmp	r0, #RWTCSRA_WOVF
+	bne	shmobile_smp_continue_gen2
+
+	ldr	r0, bootrom
+	bx	r0
+
+shmobile_smp_continue_gen2:
+	ldr     r1, shmobile_boot_fn_gen2
+	bx	r1
+
+ENDPROC(shmobile_boot_vector_gen2)
+
+	.align	4
+rwtcsra:
+	.word	RWTCSRA_ADDRESS
+bootrom:
+	.word	BOOTROM_ADDRESS
+	.globl	shmobile_boot_cpu_gen2
+shmobile_boot_cpu_gen2:
+	.word	0x00000000
+
+	.align	2
+	.globl	shmobile_boot_fn_gen2
+shmobile_boot_fn_gen2:
+	.space	4
+	.globl	shmobile_boot_size_gen2
+shmobile_boot_size_gen2:
+	.long	. - shmobile_boot_vector_gen2
+#endif /* CONFIG_ARCH_RCAR_GEN2 */
+
 /*
  * Per-CPU SMP boot function/argument selection code based on MPIDR
  */
-- 
2.11.0

[PATCH 14/14] ARM: shmobile: rcar-gen2: Add watchdog support

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

This patch adds watchdog support by installing shmobile_boot_vector_gen2
to ICRAM1 when enough memory is available, in which case we also keep a
copy of MPIDR to complete the reset vector logic.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/platsmp-apmu.c |  1 +
 arch/arm/mach-shmobile/pm-rcar-gen2.c | 15 ++++++++++++---
 2 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c
index 4422b615a6ee..ba732effc90b 100644
--- a/arch/arm/mach-shmobile/platsmp-apmu.c
+++ b/arch/arm/mach-shmobile/platsmp-apmu.c
@@ -191,6 +191,7 @@ static void __init shmobile_smp_apmu_setup_boot(void)
 {
 	/* install boot code shared by all CPUs */
 	shmobile_boot_fn = __pa_symbol(shmobile_smp_boot);
+	shmobile_boot_fn_gen2 = shmobile_boot_fn;
 }
 
 void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus,
diff --git a/arch/arm/mach-shmobile/pm-rcar-gen2.c b/arch/arm/mach-shmobile/pm-rcar-gen2.c
index e5f215c8b218..5a798b406af0 100644
--- a/arch/arm/mach-shmobile/pm-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/pm-rcar-gen2.c
@@ -17,6 +17,7 @@
 #include <linux/smp.h>
 #include <linux/soc/renesas/rcar-sysc.h>
 #include <asm/io.h>
+#include <asm/cputype.h>
 #include "common.h"
 #include "rcar-gen2.h"
 
@@ -37,7 +38,6 @@
 #define CA7RESCNT_CODE	0x5a5a0000
 #define CA7RESCNT_CPUS	0xf		/* CPU0-3 */
 
-
 /* On-chip RAM */
 #define ICRAM1		0xe63c0000	/* Inter Connect RAM1 (4 KiB) */
 
@@ -119,8 +119,17 @@ void __init rcar_gen2_pm_init(void)
 	p = ioremap(res.start, resource_size(&res));
 	if (!p)
 		return;
-
-	memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
+	/*
+	 * install the reset vector, use the largest version if we have enough
+	 * memory available
+	 */
+	if (resource_size(&res) >= shmobile_boot_size_gen2) {
+		shmobile_boot_cpu_gen2 = read_cpuid_mpidr();
+		memcpy_toio(p, shmobile_boot_vector_gen2,
+			    shmobile_boot_size_gen2);
+	} else {
+		memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
+	}
 	iounmap(p);
 
 	/* setup reset vectors */
-- 
2.11.0

[PATCH 14/14] ARM: shmobile: rcar-gen2: Add watchdog support

[Simon Horman]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

This patch adds watchdog support by installing shmobile_boot_vector_gen2
to ICRAM1 when enough memory is available, in which case we also keep a
copy of MPIDR to complete the reset vector logic.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/platsmp-apmu.c |  1 +
 arch/arm/mach-shmobile/pm-rcar-gen2.c | 15 ++++++++++++---
 2 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c
index 4422b615a6ee..ba732effc90b 100644
--- a/arch/arm/mach-shmobile/platsmp-apmu.c
+++ b/arch/arm/mach-shmobile/platsmp-apmu.c
@@ -191,6 +191,7 @@ static void __init shmobile_smp_apmu_setup_boot(void)
 {
 	/* install boot code shared by all CPUs */
 	shmobile_boot_fn = __pa_symbol(shmobile_smp_boot);
+	shmobile_boot_fn_gen2 = shmobile_boot_fn;
 }
 
 void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus,
diff --git a/arch/arm/mach-shmobile/pm-rcar-gen2.c b/arch/arm/mach-shmobile/pm-rcar-gen2.c
index e5f215c8b218..5a798b406af0 100644
--- a/arch/arm/mach-shmobile/pm-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/pm-rcar-gen2.c
@@ -17,6 +17,7 @@
 #include <linux/smp.h>
 #include <linux/soc/renesas/rcar-sysc.h>
 #include <asm/io.h>
+#include <asm/cputype.h>
 #include "common.h"
 #include "rcar-gen2.h"
 
@@ -37,7 +38,6 @@
 #define CA7RESCNT_CODE	0x5a5a0000
 #define CA7RESCNT_CPUS	0xf		/* CPU0-3 */
 
-
 /* On-chip RAM */
 #define ICRAM1		0xe63c0000	/* Inter Connect RAM1 (4 KiB) */
 
@@ -119,8 +119,17 @@ void __init rcar_gen2_pm_init(void)
 	p = ioremap(res.start, resource_size(&res));
 	if (!p)
 		return;
-
-	memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
+	/*
+	 * install the reset vector, use the largest version if we have enough
+	 * memory available
+	 */
+	if (resource_size(&res) >= shmobile_boot_size_gen2) {
+		shmobile_boot_cpu_gen2 = read_cpuid_mpidr();
+		memcpy_toio(p, shmobile_boot_vector_gen2,
+			    shmobile_boot_size_gen2);
+	} else {
+		memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
+	}
 	iounmap(p);
 
 	/* setup reset vectors */
-- 
2.11.0

Re: [GIT PULL] Renesas ARM Based SoC Updates for v4.17

[Arnd Bergmann]

On Fri, Mar 16, 2018 at 3:53 PM, Simon Horman
<horms+renesas@verge.net.au> wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
>
> Please consider these Renesas ARM based SoC updates for v4.17.
>

Pulled into next/soc, thanks!

     Arnd

[GIT PULL] Renesas ARM Based SoC Updates for v4.17

[Arnd Bergmann]

On Fri, Mar 16, 2018 at 3:53 PM, Simon Horman
<horms+renesas@verge.net.au> wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
>
> Please consider these Renesas ARM based SoC updates for v4.17.
>

Pulled into next/soc, thanks!

     Arnd