* [PATCH] x86/build: suppress EFI-related tool chain checks upon local $(MAKE) recursion
@ 2021-09-21 15:43 Jan Beulich
2021-10-08 11:09 ` Anthony PERARD
0 siblings, 1 reply; 3+ messages in thread
From: Jan Beulich @ 2021-09-21 15:43 UTC (permalink / raw)
To: xen-devel; +Cc: Andrew Cooper, Wei Liu, Roger Pau Monné
The xen-syms and xen.efi linking steps are serialized only when the
intermediate note.o file is necessary. Otherwise both may run in
parallel. This in turn means that the compiler / linker invocations to
create efi/check.o / efi/check.efi may also happen twice in parallel.
Obviously it's a bad idea to have multiple producers of the same output
race with one another - every once in a while one may e.g. observe
objdump: efi/check.efi: file format not recognized
We don't need this EFI related checking to occur when producing the
intermediate symbol and relocation table objects, and we have an easy
way of suppressing it: Simply pass in "efi-y=", overriding the
assignments done in the Makefile and thus forcing the tool chain checks
to be bypassed.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
Obviously the real (but more involved) solution would be to do away with
the recursive $(MAKE) invocations, by breaking up the long linking
rules. Representing them instead through multiple smaller rules with
suitable dependencies is certainly possible (and might even reduce
redundancy).
--- a/xen/arch/x86/Makefile
+++ b/xen/arch/x86/Makefile
@@ -182,13 +182,13 @@ $(TARGET)-syms: prelink.o xen.lds
$(NM) -pa --format=sysv $(@D)/.$(@F).0 \
| $(BASEDIR)/tools/symbols $(all_symbols) --sysv --sort \
>$(@D)/.$(@F).0.S
- $(MAKE) -f $(BASEDIR)/Rules.mk $(@D)/.$(@F).0.o
+ $(MAKE) -f $(BASEDIR)/Rules.mk efi-y= $(@D)/.$(@F).0.o
$(LD) $(XEN_LDFLAGS) -T xen.lds -N prelink.o $(build_id_linker) \
$(@D)/.$(@F).0.o -o $(@D)/.$(@F).1
$(NM) -pa --format=sysv $(@D)/.$(@F).1 \
| $(BASEDIR)/tools/symbols $(all_symbols) --sysv --sort $(syms-warn-dup-y) \
>$(@D)/.$(@F).1.S
- $(MAKE) -f $(BASEDIR)/Rules.mk $(@D)/.$(@F).1.o
+ $(MAKE) -f $(BASEDIR)/Rules.mk efi-y= $(@D)/.$(@F).1.o
$(LD) $(XEN_LDFLAGS) -T xen.lds -N prelink.o $(build_id_linker) \
$(@D)/.$(@F).1.o -o $@
$(NM) -pa --format=sysv $(@D)/$(@F) \
@@ -249,14 +249,14 @@ endif
$(MKRELOC) $(foreach base,$(VIRT_BASE) $(ALT_BASE),$(@D)/.$(@F).$(base).0) >$(@D)/.$(@F).0r.S
$(NM) -pa --format=sysv $(@D)/.$(@F).$(VIRT_BASE).0 \
| $(BASEDIR)/tools/symbols $(all_symbols) --sysv --sort >$(@D)/.$(@F).0s.S
- $(MAKE) -f $(BASEDIR)/Rules.mk $(@D)/.$(@F).0r.o $(@D)/.$(@F).0s.o
+ $(MAKE) -f $(BASEDIR)/Rules.mk efi-y= $(@D)/.$(@F).0r.o $(@D)/.$(@F).0s.o
$(foreach base, $(VIRT_BASE) $(ALT_BASE), \
$(LD) $(call EFI_LDFLAGS,$(base)) -T efi.lds -N $< \
$(@D)/.$(@F).0r.o $(@D)/.$(@F).0s.o $(note_file_option) -o $(@D)/.$(@F).$(base).1 &&) :
$(MKRELOC) $(foreach base,$(VIRT_BASE) $(ALT_BASE),$(@D)/.$(@F).$(base).1) >$(@D)/.$(@F).1r.S
$(NM) -pa --format=sysv $(@D)/.$(@F).$(VIRT_BASE).1 \
| $(BASEDIR)/tools/symbols $(all_symbols) --sysv --sort >$(@D)/.$(@F).1s.S
- $(MAKE) -f $(BASEDIR)/Rules.mk $(@D)/.$(@F).1r.o $(@D)/.$(@F).1s.o
+ $(MAKE) -f $(BASEDIR)/Rules.mk efi-y= $(@D)/.$(@F).1r.o $(@D)/.$(@F).1s.o
$(LD) $(call EFI_LDFLAGS,$(VIRT_BASE)) -T efi.lds -N $< \
$(@D)/.$(@F).1r.o $(@D)/.$(@F).1s.o $(note_file_option) -o $@
$(NM) -pa --format=sysv $(@D)/$(@F) \
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] x86/build: suppress EFI-related tool chain checks upon local $(MAKE) recursion
2021-09-21 15:43 [PATCH] x86/build: suppress EFI-related tool chain checks upon local $(MAKE) recursion Jan Beulich
@ 2021-10-08 11:09 ` Anthony PERARD
2021-10-08 12:34 ` Jan Beulich
0 siblings, 1 reply; 3+ messages in thread
From: Anthony PERARD @ 2021-10-08 11:09 UTC (permalink / raw)
To: Jan Beulich; +Cc: xen-devel, Andrew Cooper, Wei Liu, Roger Pau Monné
On Tue, Sep 21, 2021 at 05:43:38PM +0200, Jan Beulich wrote:
> The xen-syms and xen.efi linking steps are serialized only when the
> intermediate note.o file is necessary. Otherwise both may run in
> parallel. This in turn means that the compiler / linker invocations to
> create efi/check.o / efi/check.efi may also happen twice in parallel.
> Obviously it's a bad idea to have multiple producers of the same output
> race with one another - every once in a while one may e.g. observe
>
> objdump: efi/check.efi: file format not recognized
>
> We don't need this EFI related checking to occur when producing the
> intermediate symbol and relocation table objects, and we have an easy
> way of suppressing it: Simply pass in "efi-y=", overriding the
> assignments done in the Makefile and thus forcing the tool chain checks
> to be bypassed.
>
> Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
> ---
> Obviously the real (but more involved) solution would be to do away with
> the recursive $(MAKE) invocations, by breaking up the long linking
> rules. Representing them instead through multiple smaller rules with
> suitable dependencies is certainly possible (and might even reduce
> redundancy).
There is an alternative to that. Linux have a script which does the kind
of step we do. So maybe doing the same and move the recipe into a script
would work too? This would allow to share the recipe between x86 and Arm
as the link phase of xen-syms is nearly identical. But to avoid calling
make from the script we would have to duplicate the recipe of %.o:%.S.
The xen.efi rules is still x86 only and I don't know whether we could
use the same script as for xen-syms.
I don't know which option would be better those two and the current
state.
Cheers,
--
Anthony PERARD
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] x86/build: suppress EFI-related tool chain checks upon local $(MAKE) recursion
2021-10-08 11:09 ` Anthony PERARD
@ 2021-10-08 12:34 ` Jan Beulich
0 siblings, 0 replies; 3+ messages in thread
From: Jan Beulich @ 2021-10-08 12:34 UTC (permalink / raw)
To: Anthony PERARD; +Cc: xen-devel, Andrew Cooper, Wei Liu, Roger Pau Monné
On 08.10.2021 13:09, Anthony PERARD wrote:
> On Tue, Sep 21, 2021 at 05:43:38PM +0200, Jan Beulich wrote:
>> The xen-syms and xen.efi linking steps are serialized only when the
>> intermediate note.o file is necessary. Otherwise both may run in
>> parallel. This in turn means that the compiler / linker invocations to
>> create efi/check.o / efi/check.efi may also happen twice in parallel.
>> Obviously it's a bad idea to have multiple producers of the same output
>> race with one another - every once in a while one may e.g. observe
>>
>> objdump: efi/check.efi: file format not recognized
>>
>> We don't need this EFI related checking to occur when producing the
>> intermediate symbol and relocation table objects, and we have an easy
>> way of suppressing it: Simply pass in "efi-y=", overriding the
>> assignments done in the Makefile and thus forcing the tool chain checks
>> to be bypassed.
>>
>> Signed-off-by: Jan Beulich <jbeulich@suse.com>
>
> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Thanks.
>> ---
>> Obviously the real (but more involved) solution would be to do away with
>> the recursive $(MAKE) invocations, by breaking up the long linking
>> rules. Representing them instead through multiple smaller rules with
>> suitable dependencies is certainly possible (and might even reduce
>> redundancy).
>
> There is an alternative to that. Linux have a script which does the kind
> of step we do. So maybe doing the same and move the recipe into a script
> would work too? This would allow to share the recipe between x86 and Arm
> as the link phase of xen-syms is nearly identical. But to avoid calling
> make from the script we would have to duplicate the recipe of %.o:%.S.
> The xen.efi rules is still x86 only and I don't know whether we could
> use the same script as for xen-syms.
Hmm, maybe. The main aspect I'm not sure about is that, as you say, we
have two linking targets while Linux has just one. If there are no
interdependencies regardless of build mode, doing what you suggest may
be fine. If there were interdependencies, your approach may lead to
serialization of both rules, while breaking up may allow large parts to
get carried out in parallel.
Also, not exactly fitting the pattern above, lines like
$(MAKE) -f $(BASEDIR)/Rules.mk efi-y= $(@D)/.$(@F).0r.o $(@D)/.$(@F).0s.o
when split up allow both objects to (continue to) be built in parallel;
arranging for this from a script may be more involved (albeit my knowledge
of how make works is lacking here - maybe an instance invoked from a shell
script can use the parent make's job server just as well as one invoked
from a Makefile). As you may imply, I don't think we should be duplicating
the %.o:%.S rule, but indeed have make deal with this.
Jan
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-10-08 12:35 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-09-21 15:43 [PATCH] x86/build: suppress EFI-related tool chain checks upon local $(MAKE) recursion Jan Beulich
2021-10-08 11:09 ` Anthony PERARD
2021-10-08 12:34 ` Jan Beulich
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.