* [PATCH] ARM: dts: aspeed: mtjade,mtmitchell: Add BMC SSIF nodes
@ 2022-10-24 8:11 ` Quan Nguyen
0 siblings, 0 replies; 12+ messages in thread
From: Quan Nguyen @ 2022-10-24 8:11 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Joel Stanley, Andrew Jeffery,
Open Source Submission
Cc: devicetree, linux-kernel, openbmc, linux-arm-kernel,
linux-aspeed, Phong Vo, thang, Quan Nguyen
Add BMC SSIF node to support IPMI in-band communication.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
---
arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 4 ++++
arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts | 4 ++++
2 files changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
index d127cbcc7998..353359822d7b 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
@@ -342,6 +342,10 @@ &mac1 {
&i2c0 {
status = "okay";
+ ssif-bmc@10 {
+ compatible = "ssif-bmc";
+ reg = <0x10>;
+ };
};
&i2c1 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
index 606cd4be245a..4b91600eaf62 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
@@ -445,6 +445,10 @@ &i2c9 {
&i2c11 {
status = "okay";
+ ssif-bmc@10 {
+ compatible = "ssif-bmc";
+ reg = <0x10>;
+ };
};
&i2c14 {
--
2.35.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH] ARM: dts: aspeed: mtjade,mtmitchell: Add BMC SSIF nodes
@ 2022-10-24 8:11 ` Quan Nguyen
0 siblings, 0 replies; 12+ messages in thread
From: Quan Nguyen @ 2022-10-24 8:11 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Joel Stanley, Andrew Jeffery,
Open Source Submission
Cc: devicetree, linux-aspeed, openbmc, thang, linux-kernel, Phong Vo,
Quan Nguyen, linux-arm-kernel
Add BMC SSIF node to support IPMI in-band communication.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
---
arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 4 ++++
arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts | 4 ++++
2 files changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
index d127cbcc7998..353359822d7b 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
@@ -342,6 +342,10 @@ &mac1 {
&i2c0 {
status = "okay";
+ ssif-bmc@10 {
+ compatible = "ssif-bmc";
+ reg = <0x10>;
+ };
};
&i2c1 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
index 606cd4be245a..4b91600eaf62 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
@@ -445,6 +445,10 @@ &i2c9 {
&i2c11 {
status = "okay";
+ ssif-bmc@10 {
+ compatible = "ssif-bmc";
+ reg = <0x10>;
+ };
};
&i2c14 {
--
2.35.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH] ARM: dts: aspeed: mtjade,mtmitchell: Add BMC SSIF nodes
@ 2022-10-24 8:11 ` Quan Nguyen
0 siblings, 0 replies; 12+ messages in thread
From: Quan Nguyen @ 2022-10-24 8:11 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Joel Stanley, Andrew Jeffery,
Open Source Submission
Cc: devicetree, linux-kernel, openbmc, linux-arm-kernel,
linux-aspeed, Phong Vo, thang, Quan Nguyen
Add BMC SSIF node to support IPMI in-band communication.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
---
arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 4 ++++
arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts | 4 ++++
2 files changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
index d127cbcc7998..353359822d7b 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
@@ -342,6 +342,10 @@ &mac1 {
&i2c0 {
status = "okay";
+ ssif-bmc@10 {
+ compatible = "ssif-bmc";
+ reg = <0x10>;
+ };
};
&i2c1 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
index 606cd4be245a..4b91600eaf62 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
@@ -445,6 +445,10 @@ &i2c9 {
&i2c11 {
status = "okay";
+ ssif-bmc@10 {
+ compatible = "ssif-bmc";
+ reg = <0x10>;
+ };
};
&i2c14 {
--
2.35.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH] ARM: dts: aspeed: mtjade,mtmitchell: Add BMC SSIF nodes
2022-10-24 8:11 ` Quan Nguyen
(?)
@ 2022-11-16 7:06 ` Quan Nguyen
-1 siblings, 0 replies; 12+ messages in thread
From: Quan Nguyen @ 2022-11-16 7:06 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Joel Stanley, Andrew Jeffery,
Open Source Submission
Cc: devicetree, linux-kernel, openbmc, linux-arm-kernel,
linux-aspeed, Phong Vo, thang
Just a gentle ping about this patch.
Thanks and best regards,
- Quan
On 24/10/2022 15:11, Quan Nguyen wrote:
> Add BMC SSIF node to support IPMI in-band communication.
>
> Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
> ---
> arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 4 ++++
> arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts | 4 ++++
> 2 files changed, 8 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
> index d127cbcc7998..353359822d7b 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
> @@ -342,6 +342,10 @@ &mac1 {
>
> &i2c0 {
> status = "okay";
> + ssif-bmc@10 {
> + compatible = "ssif-bmc";
> + reg = <0x10>;
> + };
> };
>
> &i2c1 {
> diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
> index 606cd4be245a..4b91600eaf62 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
> @@ -445,6 +445,10 @@ &i2c9 {
>
> &i2c11 {
> status = "okay";
> + ssif-bmc@10 {
> + compatible = "ssif-bmc";
> + reg = <0x10>;
> + };
> };
>
> &i2c14 {
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] ARM: dts: aspeed: mtjade,mtmitchell: Add BMC SSIF nodes
@ 2022-11-16 7:06 ` Quan Nguyen
0 siblings, 0 replies; 12+ messages in thread
From: Quan Nguyen @ 2022-11-16 7:06 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Joel Stanley, Andrew Jeffery,
Open Source Submission
Cc: devicetree, linux-aspeed, openbmc, thang, linux-kernel, Phong Vo,
linux-arm-kernel
Just a gentle ping about this patch.
Thanks and best regards,
- Quan
On 24/10/2022 15:11, Quan Nguyen wrote:
> Add BMC SSIF node to support IPMI in-band communication.
>
> Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
> ---
> arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 4 ++++
> arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts | 4 ++++
> 2 files changed, 8 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
> index d127cbcc7998..353359822d7b 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
> @@ -342,6 +342,10 @@ &mac1 {
>
> &i2c0 {
> status = "okay";
> + ssif-bmc@10 {
> + compatible = "ssif-bmc";
> + reg = <0x10>;
> + };
> };
>
> &i2c1 {
> diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
> index 606cd4be245a..4b91600eaf62 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
> @@ -445,6 +445,10 @@ &i2c9 {
>
> &i2c11 {
> status = "okay";
> + ssif-bmc@10 {
> + compatible = "ssif-bmc";
> + reg = <0x10>;
> + };
> };
>
> &i2c14 {
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] ARM: dts: aspeed: mtjade,mtmitchell: Add BMC SSIF nodes
@ 2022-11-16 7:06 ` Quan Nguyen
0 siblings, 0 replies; 12+ messages in thread
From: Quan Nguyen @ 2022-11-16 7:06 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Joel Stanley, Andrew Jeffery,
Open Source Submission
Cc: devicetree, linux-kernel, openbmc, linux-arm-kernel,
linux-aspeed, Phong Vo, thang
Just a gentle ping about this patch.
Thanks and best regards,
- Quan
On 24/10/2022 15:11, Quan Nguyen wrote:
> Add BMC SSIF node to support IPMI in-band communication.
>
> Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
> ---
> arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 4 ++++
> arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts | 4 ++++
> 2 files changed, 8 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
> index d127cbcc7998..353359822d7b 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
> @@ -342,6 +342,10 @@ &mac1 {
>
> &i2c0 {
> status = "okay";
> + ssif-bmc@10 {
> + compatible = "ssif-bmc";
> + reg = <0x10>;
> + };
> };
>
> &i2c1 {
> diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
> index 606cd4be245a..4b91600eaf62 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
> @@ -445,6 +445,10 @@ &i2c9 {
>
> &i2c11 {
> status = "okay";
> + ssif-bmc@10 {
> + compatible = "ssif-bmc";
> + reg = <0x10>;
> + };
> };
>
> &i2c14 {
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] ARM: dts: aspeed: mtjade,mtmitchell: Add BMC SSIF nodes
2022-11-16 7:06 ` Quan Nguyen
(?)
@ 2022-11-17 3:01 ` Joel Stanley
-1 siblings, 0 replies; 12+ messages in thread
From: Joel Stanley @ 2022-11-17 3:01 UTC (permalink / raw)
To: Quan Nguyen
Cc: Rob Herring, Krzysztof Kozlowski, Andrew Jeffery,
Open Source Submission, devicetree, linux-kernel, openbmc,
linux-arm-kernel, linux-aspeed, Phong Vo, thang
On Wed, 16 Nov 2022 at 07:06, Quan Nguyen <quan@os.amperecomputing.com> wrote:
>
>
> Just a gentle ping about this patch.
>
> Thanks and best regards,
> - Quan
>
> On 24/10/2022 15:11, Quan Nguyen wrote:
> > Add BMC SSIF node to support IPMI in-band communication.
> >
> > Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Applied, thanks.
> > ---
> > arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 4 ++++
> > arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts | 4 ++++
> > 2 files changed, 8 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
> > index d127cbcc7998..353359822d7b 100644
> > --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
> > +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
> > @@ -342,6 +342,10 @@ &mac1 {
> >
> > &i2c0 {
> > status = "okay";
> > + ssif-bmc@10 {
> > + compatible = "ssif-bmc";
> > + reg = <0x10>;
> > + };
> > };
> >
> > &i2c1 {
> > diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
> > index 606cd4be245a..4b91600eaf62 100644
> > --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
> > +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
> > @@ -445,6 +445,10 @@ &i2c9 {
> >
> > &i2c11 {
> > status = "okay";
> > + ssif-bmc@10 {
> > + compatible = "ssif-bmc";
> > + reg = <0x10>;
> > + };
> > };
> >
> > &i2c14 {
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] ARM: dts: aspeed: mtjade,mtmitchell: Add BMC SSIF nodes
@ 2022-11-17 3:01 ` Joel Stanley
0 siblings, 0 replies; 12+ messages in thread
From: Joel Stanley @ 2022-11-17 3:01 UTC (permalink / raw)
To: Quan Nguyen
Cc: devicetree, linux-aspeed, Andrew Jeffery, openbmc, thang,
linux-kernel, Phong Vo, Rob Herring, Krzysztof Kozlowski,
Open Source Submission, linux-arm-kernel
On Wed, 16 Nov 2022 at 07:06, Quan Nguyen <quan@os.amperecomputing.com> wrote:
>
>
> Just a gentle ping about this patch.
>
> Thanks and best regards,
> - Quan
>
> On 24/10/2022 15:11, Quan Nguyen wrote:
> > Add BMC SSIF node to support IPMI in-band communication.
> >
> > Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Applied, thanks.
> > ---
> > arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 4 ++++
> > arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts | 4 ++++
> > 2 files changed, 8 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
> > index d127cbcc7998..353359822d7b 100644
> > --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
> > +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
> > @@ -342,6 +342,10 @@ &mac1 {
> >
> > &i2c0 {
> > status = "okay";
> > + ssif-bmc@10 {
> > + compatible = "ssif-bmc";
> > + reg = <0x10>;
> > + };
> > };
> >
> > &i2c1 {
> > diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
> > index 606cd4be245a..4b91600eaf62 100644
> > --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
> > +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
> > @@ -445,6 +445,10 @@ &i2c9 {
> >
> > &i2c11 {
> > status = "okay";
> > + ssif-bmc@10 {
> > + compatible = "ssif-bmc";
> > + reg = <0x10>;
> > + };
> > };
> >
> > &i2c14 {
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] ARM: dts: aspeed: mtjade,mtmitchell: Add BMC SSIF nodes
@ 2022-11-17 3:01 ` Joel Stanley
0 siblings, 0 replies; 12+ messages in thread
From: Joel Stanley @ 2022-11-17 3:01 UTC (permalink / raw)
To: Quan Nguyen
Cc: Rob Herring, Krzysztof Kozlowski, Andrew Jeffery,
Open Source Submission, devicetree, linux-kernel, openbmc,
linux-arm-kernel, linux-aspeed, Phong Vo, thang
On Wed, 16 Nov 2022 at 07:06, Quan Nguyen <quan@os.amperecomputing.com> wrote:
>
>
> Just a gentle ping about this patch.
>
> Thanks and best regards,
> - Quan
>
> On 24/10/2022 15:11, Quan Nguyen wrote:
> > Add BMC SSIF node to support IPMI in-band communication.
> >
> > Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Applied, thanks.
> > ---
> > arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 4 ++++
> > arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts | 4 ++++
> > 2 files changed, 8 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
> > index d127cbcc7998..353359822d7b 100644
> > --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
> > +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
> > @@ -342,6 +342,10 @@ &mac1 {
> >
> > &i2c0 {
> > status = "okay";
> > + ssif-bmc@10 {
> > + compatible = "ssif-bmc";
> > + reg = <0x10>;
> > + };
> > };
> >
> > &i2c1 {
> > diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
> > index 606cd4be245a..4b91600eaf62 100644
> > --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
> > +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
> > @@ -445,6 +445,10 @@ &i2c9 {
> >
> > &i2c11 {
> > status = "okay";
> > + ssif-bmc@10 {
> > + compatible = "ssif-bmc";
> > + reg = <0x10>;
> > + };
> > };
> >
> > &i2c14 {
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] ARM: dts: aspeed: mtjade,mtmitchell: Add BMC SSIF nodes
2022-11-17 3:01 ` Joel Stanley
(?)
@ 2022-11-17 3:23 ` Quan Nguyen
-1 siblings, 0 replies; 12+ messages in thread
From: Quan Nguyen @ 2022-11-17 3:23 UTC (permalink / raw)
To: Joel Stanley
Cc: Rob Herring, Krzysztof Kozlowski, Andrew Jeffery,
Open Source Submission, devicetree, linux-kernel, openbmc,
linux-arm-kernel, linux-aspeed, Phong Vo, thang
On 17/11/2022 10:01, Joel Stanley wrote:
> On Wed, 16 Nov 2022 at 07:06, Quan Nguyen <quan@os.amperecomputing.com> wrote:
>>
>>
>> Just a gentle ping about this patch.
>>
>> Thanks and best regards,
>> - Quan
>>
>> On 24/10/2022 15:11, Quan Nguyen wrote:
>>> Add BMC SSIF node to support IPMI in-band communication.
>>>
>>> Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
>
> Applied, thanks.
>
Thanks Joel.
- Quan
>
>>> ---
>>> arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 4 ++++
>>> arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts | 4 ++++
>>> 2 files changed, 8 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
>>> index d127cbcc7998..353359822d7b 100644
>>> --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
>>> +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
>>> @@ -342,6 +342,10 @@ &mac1 {
>>>
>>> &i2c0 {
>>> status = "okay";
>>> + ssif-bmc@10 {
>>> + compatible = "ssif-bmc";
>>> + reg = <0x10>;
>>> + };
>>> };
>>>
>>> &i2c1 {
>>> diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
>>> index 606cd4be245a..4b91600eaf62 100644
>>> --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
>>> +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
>>> @@ -445,6 +445,10 @@ &i2c9 {
>>>
>>> &i2c11 {
>>> status = "okay";
>>> + ssif-bmc@10 {
>>> + compatible = "ssif-bmc";
>>> + reg = <0x10>;
>>> + };
>>> };
>>>
>>> &i2c14 {
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] ARM: dts: aspeed: mtjade,mtmitchell: Add BMC SSIF nodes
@ 2022-11-17 3:23 ` Quan Nguyen
0 siblings, 0 replies; 12+ messages in thread
From: Quan Nguyen @ 2022-11-17 3:23 UTC (permalink / raw)
To: Joel Stanley
Cc: Rob Herring, Krzysztof Kozlowski, Andrew Jeffery,
Open Source Submission, devicetree, linux-kernel, openbmc,
linux-arm-kernel, linux-aspeed, Phong Vo, thang
On 17/11/2022 10:01, Joel Stanley wrote:
> On Wed, 16 Nov 2022 at 07:06, Quan Nguyen <quan@os.amperecomputing.com> wrote:
>>
>>
>> Just a gentle ping about this patch.
>>
>> Thanks and best regards,
>> - Quan
>>
>> On 24/10/2022 15:11, Quan Nguyen wrote:
>>> Add BMC SSIF node to support IPMI in-band communication.
>>>
>>> Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
>
> Applied, thanks.
>
Thanks Joel.
- Quan
>
>>> ---
>>> arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 4 ++++
>>> arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts | 4 ++++
>>> 2 files changed, 8 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
>>> index d127cbcc7998..353359822d7b 100644
>>> --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
>>> +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
>>> @@ -342,6 +342,10 @@ &mac1 {
>>>
>>> &i2c0 {
>>> status = "okay";
>>> + ssif-bmc@10 {
>>> + compatible = "ssif-bmc";
>>> + reg = <0x10>;
>>> + };
>>> };
>>>
>>> &i2c1 {
>>> diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
>>> index 606cd4be245a..4b91600eaf62 100644
>>> --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
>>> +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
>>> @@ -445,6 +445,10 @@ &i2c9 {
>>>
>>> &i2c11 {
>>> status = "okay";
>>> + ssif-bmc@10 {
>>> + compatible = "ssif-bmc";
>>> + reg = <0x10>;
>>> + };
>>> };
>>>
>>> &i2c14 {
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] ARM: dts: aspeed: mtjade,mtmitchell: Add BMC SSIF nodes
@ 2022-11-17 3:23 ` Quan Nguyen
0 siblings, 0 replies; 12+ messages in thread
From: Quan Nguyen @ 2022-11-17 3:23 UTC (permalink / raw)
To: Joel Stanley
Cc: devicetree, linux-aspeed, Andrew Jeffery, openbmc, thang,
linux-kernel, Phong Vo, Rob Herring, Krzysztof Kozlowski,
Open Source Submission, linux-arm-kernel
On 17/11/2022 10:01, Joel Stanley wrote:
> On Wed, 16 Nov 2022 at 07:06, Quan Nguyen <quan@os.amperecomputing.com> wrote:
>>
>>
>> Just a gentle ping about this patch.
>>
>> Thanks and best regards,
>> - Quan
>>
>> On 24/10/2022 15:11, Quan Nguyen wrote:
>>> Add BMC SSIF node to support IPMI in-band communication.
>>>
>>> Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
>
> Applied, thanks.
>
Thanks Joel.
- Quan
>
>>> ---
>>> arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 4 ++++
>>> arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts | 4 ++++
>>> 2 files changed, 8 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
>>> index d127cbcc7998..353359822d7b 100644
>>> --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
>>> +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
>>> @@ -342,6 +342,10 @@ &mac1 {
>>>
>>> &i2c0 {
>>> status = "okay";
>>> + ssif-bmc@10 {
>>> + compatible = "ssif-bmc";
>>> + reg = <0x10>;
>>> + };
>>> };
>>>
>>> &i2c1 {
>>> diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
>>> index 606cd4be245a..4b91600eaf62 100644
>>> --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
>>> +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
>>> @@ -445,6 +445,10 @@ &i2c9 {
>>>
>>> &i2c11 {
>>> status = "okay";
>>> + ssif-bmc@10 {
>>> + compatible = "ssif-bmc";
>>> + reg = <0x10>;
>>> + };
>>> };
>>>
>>> &i2c14 {
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2022-11-17 3:26 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-10-24 8:11 [PATCH] ARM: dts: aspeed: mtjade,mtmitchell: Add BMC SSIF nodes Quan Nguyen
2022-10-24 8:11 ` Quan Nguyen
2022-10-24 8:11 ` Quan Nguyen
2022-11-16 7:06 ` Quan Nguyen
2022-11-16 7:06 ` Quan Nguyen
2022-11-16 7:06 ` Quan Nguyen
2022-11-17 3:01 ` Joel Stanley
2022-11-17 3:01 ` Joel Stanley
2022-11-17 3:01 ` Joel Stanley
2022-11-17 3:23 ` Quan Nguyen
2022-11-17 3:23 ` Quan Nguyen
2022-11-17 3:23 ` Quan Nguyen
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.