* amd64 + mtrr: only 3.1gb of 8gb are covered, kernel 2.6.30 and earlier.
@ 2009-08-21 16:14 Volker Armin Hemmann
2009-08-22 5:43 ` Robert Hancock
` (2 more replies)
0 siblings, 3 replies; 15+ messages in thread
From: Volker Armin Hemmann @ 2009-08-21 16:14 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: Text/Plain, Size: 91508 bytes --]
Hi,
I have an amd64 system with 8GB ram. Of these only 3.1GB are currently covered
with mtrr:
cat /proc/mtrr
reg00: base=0x000000000 ( 0MB), size= 2048MB, count=1: write-back
reg01: base=0x080000000 ( 2048MB), size= 1024MB, count=1: write-back
reg02: base=0x0c0000000 ( 3072MB), size= 128MB, count=1: write-back
This is with a Phenom II X4. Mobo is an Asrock A770Crossfire with AMD 770
chipset. Ram is 1066 ddr2 running at 800.
Before that I had a X2 6000 where I had one more mtrr, covering additional
256mb with 6gb ram total.
When I use the opensource driver, I get a 'mtrr disabled' message when X
starts, nothing like that with fglrx. The results are the same.
Is there anything that I can do about it? I already played with mtrr cleanup
options - without any results.
Except for reiser4 the kernel is 'vanilla', config is attached, dmesg and lspci
are folloiwing:
dmesg:
[ 0.000000] Linux version 2.6.30.5r4 (root@energy) (gcc version 4.4.1
(Gentoo 4.4.1 p1.0) ) #1 SMP Tue Aug 18 06:28:18 CEST 2009
[ 0.000000] Command line: root=/dev/md1 md=3,/dev/sda3,/dev/sdb3,/dev/sdc3
nmi_watchdog=0 mtrr_spare_reg_nr=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7eb0000 (usable)
[ 0.000000] BIOS-e820: 00000000c7eb0000 - 00000000c7ec0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000c7ec0000 - 00000000c7ef0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000c7ef0000 - 00000000c7f00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000238000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable)
==> (reserved)
[ 0.000000] last_pfn = 0x238000 max_arch_pfn = 0x100000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF8000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000238000000 aka 9088M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] e820 update range: 00000000c8000000 - 0000000100000000 (usable)
==> (reserved)
[ 0.000000] last_pfn = 0xc7eb0 max_arch_pfn = 0x100000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000c7eb0000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00c7e00000 page 2M
[ 0.000000] 00c7e00000 - 00c7eb0000 page 4k
[ 0.000000] kernel direct mapping tables up to c7eb0000 @ 10000-13000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000238000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] 0100000000 - 0200000000 page 1G
[ 0.000000] 0200000000 - 0238000000 page 2M
[ 0.000000] kernel direct mapping tables up to 238000000 @ 12000-14000
[ 0.000000] ACPI: RSDP 00000000000fa7c0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000c7eb0000 00040 (v01 050609 RSDT2000 20090506
MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000c7eb0200 00084 (v02 A M I OEMFACP 12000601
MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000c7eb0440 08512 (v01 AS140 AS140121 00000121
INTL 20051117)
[ 0.000000] ACPI: FACS 00000000c7ec0000 00040
[ 0.000000] ACPI: APIC 00000000c7eb0390 0006C (v01 050609 APIC2000 20090506
MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000c7eb0400 0003C (v01 050609 OEMMCFG 20090506
MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000c7ec0040 00071 (v01 050609 OEMB2000 20090506
MSFT 00000097)
[ 0.000000] ACPI: AAFT 00000000c7eb8960 00027 (v01 050609 OEMAAFT 20090506
MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000c7eb8990 00038 (v01 050609 OEMHPET 20090506
MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000c7eb89d0 0088C (v01 A M I POWERNOW 00000001
AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0238000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000
- 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000
- 0000008000]
[ 0.000000] #2 [0001000000 - 0001575998] TEXT DATA BSS ==> [0001000000
- 0001575998]
[ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00
- 0000100000]
[ 0.000000] #4 [0001576000 - 0001576133] BRK ==> [0001576000
- 0001576133]
[ 0.000000] #5 [0000010000 - 0000012000] PGTABLE ==> [0000010000
- 0000012000]
[ 0.000000] #6 [0000012000 - 0000013000] PGTABLE ==> [0000012000
- 0000013000]
[ 0.000000] [ffffe20000000000-ffffe20007dfffff] PMD -> [ffff880028200000-
ffff88002fffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00238000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000c7eb0
[ 0.000000] 0: 0x00100000 -> 0x00238000
[ 0.000000] On node 0 totalpages: 2096703
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 102 pages reserved
[ 0.000000] DMA zone: 3825 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 800488 pages, LIFO batch:31
[ 0.000000] Normal zone: 17472 pages used for memmap
[ 0.000000] Normal zone: 1260480 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e6000
[ 0.000000] PM: Registered nosave memory: 00000000000e6000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000c7eb0000 -
00000000c7ec0000
[ 0.000000] PM: Registered nosave memory: 00000000c7ec0000 -
00000000c7ef0000
[ 0.000000] PM: Registered nosave memory: 00000000c7ef0000 -
00000000c7f00000
[ 0.000000] PM: Registered nosave memory: 00000000c7f00000 -
00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at c8000000 (gap:
c7f00000:38000000)
[ 0.000000] NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 24 pages at ffff880028034000, static data 67808
bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 2064793
[ 0.000000] Kernel command line: root=/dev/md1
md=3,/dev/sda3,/dev/sdb3,/dev/sdc3 nmi_watchdog=0 mtrr_spare_reg_nr=1
[ 0.000000] md: Will configure md3 (super-block) from
/dev/sda3,/dev/sdb3,/dev/sdc3, below.
[ 0.000000] Initializing CPU#0
[ 0.000000] NR_IRQS:384
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3199.760 MHz processor.
[ 0.003333] Console: colour VGA+ 80x25
[ 0.003333] console [tty0] enabled
[ 0.003333] Dentry cache hash table entries: 1048576 (order: 11, 8388608
bytes)
[ 0.003333] Inode-cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 0.003333] Checking aperture...
[ 0.003333] No AGP bridge found
[ 0.003333] Node 0: aperture @ 20000000 size 32 MB
[ 0.003333] Aperture pointing to e820 RAM. Ignoring.
[ 0.003333] Your BIOS doesn't leave a aperture memory hole
[ 0.003333] Please enable the IOMMU option in the BIOS setup
[ 0.003333] This costs you 64 MB of RAM
[ 0.003333] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.003333] PM: Registered nosave memory: 0000000020000000 -
0000000024000000
[ 0.003333] Memory: 8172700k/9306112k available (3231k kernel code, 919300k
absent, 213188k reserved, 1310k data, 348k init)
[ 0.003333] hpet clockevent registered
[ 0.003333] HPET: 4 timers in total, 1 timers will be used for per-cpu
timer
[ 0.003339] Calibrating delay loop (skipped), value calculated using timer
frequency.. 6402.15 BogoMIPS (lpj=10665853)
[ 0.003445] Mount-cache hash table entries: 256
[ 0.003564] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.003599] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003634] tseg: 0000000000
[ 0.003639] CPU: Physical Processor ID: 0
[ 0.003672] CPU: Processor Core ID: 0
[ 0.003710] using C1E aware idle routine
[ 0.003754] ACPI: Core revision 20090320
[ 0.016700] Setting APIC routing to flat
[ 0.017036] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.050750] CPU0: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.053332] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.003333] Initializing CPU#1
[ 0.003333] Calibrating delay using timer specific routine.. 6402.85
BogoMIPS (lpj=10666967)
[ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.003333] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 1
[ 0.003333] x86 PAT enabled: cpu 1, old 0x7040600070406, new
0x7010600070106
[ 0.144205] CPU1: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.144518] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.146715] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.003333] Initializing CPU#2
[ 0.003333] Calibrating delay using timer specific routine.. 6402.85
BogoMIPS (lpj=10666975)
[ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.003333] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 2
[ 0.003333] x86 PAT enabled: cpu 2, old 0x7040600070406, new
0x7010600070106
[ 0.240829] CPU2: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.241142] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.243382] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.003333] Initializing CPU#3
[ 0.003333] Calibrating delay using timer specific routine.. 6402.85
BogoMIPS (lpj=10666968)
[ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.003333] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 3
[ 0.003333] x86 PAT enabled: cpu 3, old 0x7040600070406, new
0x7010600070106
[ 0.337453] CPU3: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.337766] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.340014] Brought up 4 CPUs
[ 0.340047] Total of 4 processors activated (25610.72 BogoMIPS).
[ 0.340316] net_namespace: 1400 bytes
[ 0.340419] xor: automatically using best checksumming function:
generic_sse
[ 0.356667] generic_sse: 12784.800 MB/sec
[ 0.356701] xor: using function: generic_sse (12784.800 MB/sec)
[ 0.356754] Time: 18:06:22 Date: 08/21/09
[ 0.356835] NET: Registered protocol family 16
[ 0.357041] node 0 link 0: io port [1000, ffffff]
[ 0.357043] TOM: 00000000c8000000 aka 3200M
[ 0.357077] Fam 10h mmconf [e0000000, efffffff]
[ 0.357079] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.357081] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.357083] node 0 link 0: mmio [a0000, bffff]
[ 0.357085] node 0 link 0: mmio [c8000000, dfffffff]
[ 0.357086] TOM2: 0000000238000000 aka 9088M
[ 0.357120] bus: [00,07] on node 0 link 0
[ 0.357121] bus: 00 index 0 io port: [0, ffff]
[ 0.357122] bus: 00 index 1 mmio: [f0000000, ffffffff]
[ 0.357123] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.357124] bus: 00 index 3 mmio: [c8000000, dfffffff]
[ 0.357125] bus: 00 index 4 mmio: [238000000, fcffffffff]
[ 0.357133] ACPI: bus type pci registered
[ 0.357237] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.357272] PCI: Not using MMCONFIG.
[ 0.357305] PCI: Using configuration type 1 for base access
[ 0.357339] PCI: Using configuration type 1 for extended access
[ 0.358962] bio: create slab <bio-0> at 0
[ 0.359408] ACPI: EC: Look up EC in DSDT
[ 0.367191] ACPI: Interpreter enabled
[ 0.367226] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.367342] ACPI: Using IOAPIC for interrupt routing
[ 0.367420] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.370575] PCI: MCFG area at e0000000 reserved in ACPI motherboard
resources
[ 0.375709] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.381422] ACPI: No dock devices found.
[ 0.381651] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.381732] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
[ 0.381778] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.381813] pci 0000:00:02.0: PME# disabled
[ 0.381881] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.381916] pci 0000:00:09.0: PME# disabled
[ 0.382462] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.382497] pci 0000:00:0a.0: PME# disabled
[ 0.382575] pci 0000:00:11.0: reg 10 io port: [0x9000-0x9007]
[ 0.382581] pci 0000:00:11.0: reg 14 io port: [0x8000-0x8003]
[ 0.382587] pci 0000:00:11.0: reg 18 io port: [0x7000-0x7007]
[ 0.382593] pci 0000:00:11.0: reg 1c io port: [0x6000-0x6003]
[ 0.382598] pci 0000:00:11.0: reg 20 io port: [0x5000-0x500f]
[ 0.382604] pci 0000:00:11.0: reg 24 32bit mmio: [0xfddff800-0xfddffbff]
[ 0.382653] pci 0000:00:12.0: reg 10 32bit mmio: [0xfddfe000-0xfddfefff]
[ 0.382705] pci 0000:00:12.1: reg 10 32bit mmio: [0xfddfd000-0xfddfdfff]
[ 0.382773] pci 0000:00:12.2: reg 10 32bit mmio: [0xfddff000-0xfddff0ff]
[ 0.382823] pci 0000:00:12.2: supports D1 D2
[ 0.382824] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.382860] pci 0000:00:12.2: PME# disabled
[ 0.382922] pci 0000:00:13.0: reg 10 32bit mmio: [0xfddfc000-0xfddfcfff]
[ 0.382973] pci 0000:00:13.1: reg 10 32bit mmio: [0xfddf7000-0xfddf7fff]
[ 0.383041] pci 0000:00:13.2: reg 10 32bit mmio: [0xfddf6800-0xfddf68ff]
[ 0.383091] pci 0000:00:13.2: supports D1 D2
[ 0.383092] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.383128] pci 0000:00:13.2: PME# disabled
[ 0.383271] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[ 0.383277] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[ 0.383283] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.383288] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.383294] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
[ 0.383421] pci 0000:00:14.5: reg 10 32bit mmio: [0xfddf5000-0xfddf5fff]
[ 0.383555] pci 0000:02:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.383563] pci 0000:02:00.0: reg 18 64bit mmio: [0xfdff0000-0xfdffffff]
[ 0.383567] pci 0000:02:00.0: reg 20 io port: [0xb000-0xb0ff]
[ 0.383574] pci 0000:02:00.0: reg 30 32bit mmio: [0xfdfc0000-0xfdfdffff]
[ 0.383590] pci 0000:02:00.0: supports D1 D2
[ 0.383617] pci 0000:02:00.1: reg 10 64bit mmio: [0xfdfec000-0xfdfeffff]
[ 0.383647] pci 0000:02:00.1: supports D1 D2
[ 0.383697] pci 0000:00:02.0: bridge io port: [0xb000-0xbfff]
[ 0.383699] pci 0000:00:02.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
[ 0.383702] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.383743] pci 0000:03:00.0: reg 10 io port: [0xd800-0xd8ff]
[ 0.383759] pci 0000:03:00.0: reg 18 64bit mmio: [0xfebff000-0xfebfffff]
[ 0.383774] pci 0000:03:00.0: reg 30 32bit mmio: [0xfebc0000-0xfebdffff]
[ 0.383809] pci 0000:03:00.0: supports D1 D2
[ 0.383810] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.383847] pci 0000:03:00.0: PME# disabled
[ 0.383929] pci 0000:00:09.0: bridge io port: [0xc000-0xdfff]
[ 0.383931] pci 0000:00:09.0: bridge 32bit mmio: [0xfe000000-0xfebfffff]
[ 0.383933] pci 0000:00:09.0: bridge 64bit mmio pref: [0xfa000000-0xfcefffff]
[ 0.383964] pci 0000:01:00.0: reg 10 io port: [0xa800-0xa8ff]
[ 0.383977] pci 0000:01:00.0: reg 18 64bit mmio: [0xcffff000-0xcfffffff]
[ 0.383987] pci 0000:01:00.0: reg 20 64bit mmio: [0xcffe0000-0xcffeffff]
[ 0.383992] pci 0000:01:00.0: reg 30 32bit mmio: [0xfdef0000-0xfdefffff]
[ 0.384019] pci 0000:01:00.0: supports D1 D2
[ 0.384021] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.384057] pci 0000:01:00.0: PME# disabled
[ 0.384143] pci 0000:00:0a.0: bridge io port: [0xa000-0xafff]
[ 0.384145] pci 0000:00:0a.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.384148] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xcff00000-0xcfffffff]
[ 0.384182] pci 0000:05:06.0: reg 10 32bit mmio: [0xfcfff000-0xfcffffff]
[ 0.384262] pci 0000:05:08.0: reg 10 io port: [0xe800-0xe83f]
[ 0.384320] pci 0000:05:08.0: supports D1 D2
[ 0.384362] pci 0000:00:14.4: transparent bridge
[ 0.384398] pci 0000:00:14.4: bridge io port: [0xe000-0xefff]
[ 0.384404] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfcf00000-0xfcffffff]
[ 0.384415] pci_bus 0000:00: on NUMA node 0
[ 0.384419] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.384552] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.384597] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.384641] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.384703] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 0.387518] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
[ 0.387762] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
[ 0.388006] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[ 0.388247] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[ 0.388489] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0,
disabled.
[ 0.388777] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 12 14 15)
[ 0.389019] ACPI: PCI Interrupt Link [LNKG] (IRQs *4 10 11 12 14 15)
[ 0.389247] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 12 14 15)
[ 0.389635] SCSI subsystem initialized
[ 0.389721] libata version 3.00 loaded.
[ 0.389792] usbcore: registered new interface driver usbfs
[ 0.389850] usbcore: registered new interface driver hub
[ 0.389913] usbcore: registered new device driver usb
[ 0.446682] raid6: int64x1 2800 MB/s
[ 0.503351] raid6: int64x2 3604 MB/s
[ 0.560006] raid6: int64x4 2847 MB/s
[ 0.616678] raid6: int64x8 2701 MB/s
[ 0.673335] raid6: sse2x1 4094 MB/s
[ 0.730007] raid6: sse2x2 7122 MB/s
[ 0.786672] raid6: sse2x4 7749 MB/s
[ 0.786705] raid6: using algorithm sse2x4 (7749 MB/s)
[ 0.786789] PCI: Using ACPI for IRQ routing
[ 0.786827] pci 0000:00:00.0: BAR 3: can't allocate resource
[ 0.800198] PCI-DMA: Disabling AGP.
[ 0.800311] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.800346] PCI-DMA: using GART IOMMU.
[ 0.800380] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.802138] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0
[ 0.802246] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.806695] hpet: hpet2 irq 24 for MSI
[ 0.816682] Switched to high resolution mode on CPU 0
[ 0.817787] Switched to high resolution mode on CPU 3
[ 0.817830] Switched to high resolution mode on CPU 2
[ 0.817873] Switched to high resolution mode on CPU 1
[ 0.826700] pnp: PnP ACPI init
[ 0.826753] ACPI: bus type pnp registered
[ 0.829214] pnp 00:0b: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3
(0x0-0x1fffffff), disabling
[ 0.829269] pnp 00:0b: mem resource (0xc0000-0xcffff) overlaps 0000:00:00.0
BAR 3 (0x0-0x1fffffff), disabling
[ 0.829324] pnp 00:0b: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0
BAR 3 (0x0-0x1fffffff), disabling
[ 0.829378] pnp 00:0b: mem resource (0x100000-0xc7efffff) overlaps
0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.829732] pnp: PnP ACPI: found 12 devices
[ 0.829766] ACPI: ACPI bus type pnp unregistered
[ 0.829806] system 00:06: iomem range 0xfec00000-0xfec00fff could not be
reserved
[ 0.829859] system 00:06: iomem range 0xfee00000-0xfee00fff has been
reserved
[ 0.829897] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.829932] system 00:07: ioport range 0x40b-0x40b has been reserved
[ 0.829966] system 00:07: ioport range 0x4d6-0x4d6 has been reserved
[ 0.830007] system 00:07: ioport range 0xc00-0xc01 has been reserved
[ 0.830042] system 00:07: ioport range 0xc14-0xc14 has been reserved
[ 0.830077] system 00:07: ioport range 0xc50-0xc51 has been reserved
[ 0.830111] system 00:07: ioport range 0xc52-0xc52 has been reserved
[ 0.830146] system 00:07: ioport range 0xc6c-0xc6c has been reserved
[ 0.830180] system 00:07: ioport range 0xc6f-0xc6f has been reserved
[ 0.830215] system 00:07: ioport range 0xcd0-0xcd1 has been reserved
[ 0.830249] system 00:07: ioport range 0xcd2-0xcd3 has been reserved
[ 0.830284] system 00:07: ioport range 0xcd4-0xcd5 has been reserved
[ 0.830319] system 00:07: ioport range 0xcd6-0xcd7 has been reserved
[ 0.830353] system 00:07: ioport range 0xcd8-0xcdf has been reserved
[ 0.830388] system 00:07: ioport range 0x800-0x89f has been reserved
[ 0.830423] system 00:07: ioport range 0xb00-0xb0f has been reserved
[ 0.830457] system 00:07: ioport range 0xb20-0xb3f has been reserved
[ 0.830492] system 00:07: ioport range 0x900-0x90f has been reserved
[ 0.830526] system 00:07: ioport range 0x910-0x91f has been reserved
[ 0.830561] system 00:07: ioport range 0xfe00-0xfefe has been reserved
[ 0.830596] system 00:07: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.830631] system 00:07: iomem range 0xfec10000-0xfec1001f has been
reserved
[ 0.830668] system 00:09: ioport range 0x290-0x29f has been reserved
[ 0.830704] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.830740] system 00:0b: iomem range 0xfec00000-0xffffffff could not be
reserved
[ 0.835633] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
[ 0.835668] pci 0000:00:02.0: IO window: 0xb000-0xbfff
[ 0.835703] pci 0000:00:02.0: MEM window: 0xfdf00000-0xfdffffff
[ 0.835739] pci 0000:00:02.0: PREFETCH window:
0x000000d0000000-0x000000dfffffff
[ 0.835793] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03
[ 0.835828] pci 0000:00:09.0: IO window: 0xc000-0xdfff
[ 0.835863] pci 0000:00:09.0: MEM window: 0xfe000000-0xfebfffff
[ 0.835898] pci 0000:00:09.0: PREFETCH window:
0x000000fa000000-0x000000fcefffff
[ 0.835952] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:01
[ 0.835987] pci 0000:00:0a.0: IO window: 0xa000-0xafff
[ 0.836022] pci 0000:00:0a.0: MEM window: 0xfde00000-0xfdefffff
[ 0.836057] pci 0000:00:0a.0: PREFETCH window:
0x000000cff00000-0x000000cfffffff
[ 0.836112] pci 0000:00:14.4: PCI bridge, secondary bus 0000:05
[ 0.836147] pci 0000:00:14.4: IO window: 0xe000-0xefff
[ 0.836184] pci 0000:00:14.4: MEM window: disabled
[ 0.836220] pci 0000:00:14.4: PREFETCH window:
0x000000fcf00000-0x000000fcffffff
[ 0.836284] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.836320] pci 0000:00:02.0: setting latency timer to 64
[ 0.836325] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.836361] pci 0000:00:09.0: setting latency timer to 64
[ 0.836364] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.836399] pci 0000:00:0a.0: setting latency timer to 64
[ 0.836406] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.836408] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.836409] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff]
[ 0.836411] pci_bus 0000:02: resource 1 mem: [0xfdf00000-0xfdffffff]
[ 0.836412] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.836413] pci_bus 0000:03: resource 0 io: [0xc000-0xdfff]
[ 0.836415] pci_bus 0000:03: resource 1 mem: [0xfe000000-0xfebfffff]
[ 0.836416] pci_bus 0000:03: resource 2 pref mem [0xfa000000-0xfcefffff]
[ 0.836418] pci_bus 0000:01: resource 0 io: [0xa000-0xafff]
[ 0.836419] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.836420] pci_bus 0000:01: resource 2 pref mem [0xcff00000-0xcfffffff]
[ 0.836422] pci_bus 0000:05: resource 0 io: [0xe000-0xefff]
[ 0.836423] pci_bus 0000:05: resource 2 pref mem [0xfcf00000-0xfcffffff]
[ 0.836424] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.836426] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.836479] NET: Registered protocol family 2
[ 0.873408] IP route cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.873918] TCP established hash table entries: 262144 (order: 10, 4194304
bytes)
[ 0.874895] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.875292] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.875327] TCP reno registered
[ 0.883428] NET: Registered protocol family 1
[ 0.885125] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.885267] Loading Reiser4. See www.namesys.com for a description of
Reiser4.
[ 0.885403] msgmni has been set to 15964
[ 0.885668] alg: No test for stdrng (krng)
[ 0.885707] async_tx: api initialized (sync-only)
[ 0.885786] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 0.885839] io scheduler noop registered
[ 0.885883] io scheduler cfq registered (default)
[ 0.886008] pci 0000:02:00.0: Boot video device
[ 0.886108] pcieport-driver 0000:00:02.0: irq 25 for MSI/MSI-X
[ 0.886115] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 0.886207] pcieport-driver 0000:00:09.0: irq 26 for MSI/MSI-X
[ 0.886214] pcieport-driver 0000:00:09.0: setting latency timer to 64
[ 0.886303] pcieport-driver 0000:00:0a.0: irq 27 for MSI/MSI-X
[ 0.886309] pcieport-driver 0000:00:0a.0: setting latency timer to 64
[ 0.886528] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.886581] ACPI: Power Button [PWRF]
[ 0.886662] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.886724] ACPI: Power Button [PWRB]
[ 0.886868] processor ACPI_CPU:00: registered as cooling_device0
[ 0.886903] ACPI: Processor [P001] (supports 8 throttling states)
[ 0.886998] processor ACPI_CPU:01: registered as cooling_device1
[ 0.887066] processor ACPI_CPU:02: registered as cooling_device2
[ 0.887134] processor ACPI_CPU:03: registered as cooling_device3
[ 0.890988] Linux agpgart interface v0.103
[ 0.891110] Driver 'sd' needs updating - please use bus_type methods
[ 0.891197] ahci 0000:00:11.0: version 3.0
[ 0.891209] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.891353] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f
impl SATA mode
[ 0.891407] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio
slum part
[ 0.891916] scsi0 : ahci
[ 0.892055] scsi1 : ahci
[ 0.892146] scsi2 : ahci
[ 0.892234] scsi3 : ahci
[ 0.892323] scsi4 : ahci
[ 0.892413] scsi5 : ahci
[ 0.892540] ata1: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed
[ 0.892576] ata2: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddff980 irq
22
[ 0.892630] ata3: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffa00 irq
22
[ 0.892683] ata4: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffa80 irq
22
[ 0.892737] ata5: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffb00 irq
22
[ 0.892791] ata6: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffb80 irq
22
[ 0.893006] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.893043] PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp
[ 0.893561] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.893654] mice: PS/2 mouse device common for all mice
[ 0.893782] rtc_cmos 00:02: RTC can wake from S4
[ 0.893847] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.893902] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.893957] md: raid1 personality registered for level 1
[ 0.893991] md: raid6 personality registered for level 6
[ 0.894025] md: raid5 personality registered for level 5
[ 0.894059] md: raid4 personality registered for level 4
[ 0.894169] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
dm-devel@redhat.com
[ 0.894264] cpuidle: using governor ladder
[ 0.894400] usbcore: registered new interface driver hiddev
[ 0.894454] usbcore: registered new interface driver usbhid
[ 0.894488] usbhid: v2.6:USB HID core driver
[ 0.894562] TCP cubic registered
[ 0.894596] NET: Registered protocol family 17
[ 0.894654] powernow-k8: Found 1 AMD Phenom(tm) II X4 955 Processor
processors (4 cpu cores) (version 2.20.00)
[ 0.895233] powernow-k8: 0 : pstate 0 (3200 MHz)
[ 0.895269] powernow-k8: 1 : pstate 1 (2500 MHz)
[ 0.895303] powernow-k8: 2 : pstate 2 (2100 MHz)
[ 0.895336] powernow-k8: 3 : pstate 3 (800 MHz)
[ 0.895713] PM: Resume from disk failed.
[ 0.895806] Magic number: 5:564:140
[ 0.895863] acpi device:11: hash matches
[ 0.920790] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input2
[ 1.211283] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.211344] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.211396] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.211450] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.214613] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.217640] ata4.00: ATA-7: SAMSUNG HD753LJ, 1AA01113, max UDMA7
[ 1.217680] ata4.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.217726] ata2.00: ATA-7: SAMSUNG HD502IJ, 1AA01110, max UDMA7
[ 1.217761] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.224134] ata4.00: configured for UDMA/133
[ 1.224187] ata2.00: configured for UDMA/133
[ 1.611284] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.617637] ata1.00: ATA-7: SAMSUNG HD502IJ, 1AA01109, max UDMA7
[ 1.617674] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.624092] ata1.00: configured for UDMA/133
[ 1.637994] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0
PQ: 0 ANSI: 5
[ 1.638206] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.638258] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500
GB/465 GiB)
[ 1.638325] sd 0:0:0:0: [sda] Write Protect is off
[ 1.638359] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.638372] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.638432] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0
PQ: 0 ANSI: 5
[ 1.638468] sda:<5>sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors:
(500 GB/465 GiB)
[ 1.638628] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.638719] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.638754] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.638763] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.638857] sdb:<5>scsi 3:0:0:0: Direct-Access ATA SAMSUNG
HD753LJ 1AA0 PQ: 0 ANSI: 5
[ 1.639075] sd 3:0:0:0: [sdc] 1465149168 512-byte hardware sectors: (750
GB/698 GiB)
[ 1.639079] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1.639167] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.639201] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.639209] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.639290] sdc: sda1 sda2 sda3 sda4 < sdc1 sdc2 sdc3 sdc4 < sdb1 sdb2
sdb3 sdb4 < sdb5 sda5 sdc5 sdc6 sda6 >
[ 1.661815] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.667853] sdb6 >
[ 1.668156] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.671409] sdc7 >
[ 1.671734] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.671776] md: Waiting for all devices to be available before autodetect
[ 1.671811] md: If you don't use raid, use raid=noautodetect
[ 1.671909] md: Autodetecting RAID arrays.
[ 1.778184] md: Scanned 12 and added 12 devices.
[ 1.778219] md: autorun ...
[ 1.778252] md: considering sdc6 ...
[ 1.778289] md: adding sdc6 ...
[ 1.778323] md: sdc5 has different UUID to sdc6
[ 1.778357] md: sdc3 has different UUID to sdc6
[ 1.778392] md: sdc1 has different UUID to sdc6
[ 1.778427] md: adding sdb6 ...
[ 1.778461] md: sdb5 has different UUID to sdc6
[ 1.778495] md: sdb3 has different UUID to sdc6
[ 1.778529] md: sdb1 has different UUID to sdc6
[ 1.778564] md: adding sda6 ...
[ 1.778598] md: sda5 has different UUID to sdc6
[ 1.778632] md: sda3 has different UUID to sdc6
[ 1.778667] md: sda1 has different UUID to sdc6
[ 1.778789] md: created md3
[ 1.778822] md: bind<sda6>
[ 1.778859] md: bind<sdb6>
[ 1.778895] md: bind<sdc6>
[ 1.778932] md: running: <sdc6><sdb6><sda6>
[ 1.779059] raid5: device sdc6 operational as raid disk 2
[ 1.779093] raid5: device sdb6 operational as raid disk 1
[ 1.779127] raid5: device sda6 operational as raid disk 0
[ 1.779316] raid5: allocated 3220kB for md3
[ 1.779368] raid5: raid level 5 set md3 active with 3 out of 3 devices,
algorithm 2
[ 1.779421] RAID5 conf printout:
[ 1.779454] --- rd:3 wd:3
[ 1.779487] disk 0, o:1, dev:sda6
[ 1.779520] disk 1, o:1, dev:sdb6
[ 1.779554] disk 2, o:1, dev:sdc6
[ 1.779626] md: considering sdc5 ...
[ 1.779661] md: adding sdc5 ...
[ 1.779695] md: sdc3 has different UUID to sdc5
[ 1.779730] md: sdc1 has different UUID to sdc5
[ 1.779764] md: adding sdb5 ...
[ 1.779798] md: sdb3 has different UUID to sdc5
[ 1.779833] md: sdb1 has different UUID to sdc5
[ 1.779868] md: adding sda5 ...
[ 1.779901] md: sda3 has different UUID to sdc5
[ 1.779936] md: sda1 has different UUID to sdc5
[ 1.780031] md: created md2
[ 1.780064] md: bind<sda5>
[ 1.780101] md: bind<sdb5>
[ 1.780137] md: bind<sdc5>
[ 1.780173] md: running: <sdc5><sdb5><sda5>
[ 1.780292] raid5: device sdc5 operational as raid disk 2
[ 1.780326] raid5: device sdb5 operational as raid disk 1
[ 1.780359] raid5: device sda5 operational as raid disk 0
[ 1.780550] raid5: allocated 3220kB for md2
[ 1.780600] raid5: raid level 5 set md2 active with 3 out of 3 devices,
algorithm 2
[ 1.780653] RAID5 conf printout:
[ 1.780686] --- rd:3 wd:3
[ 1.780719] disk 0, o:1, dev:sda5
[ 1.780752] disk 1, o:1, dev:sdb5
[ 1.780785] disk 2, o:1, dev:sdc5
[ 1.780856] md: considering sdc3 ...
[ 1.780892] md: adding sdc3 ...
[ 1.780926] md: sdc1 has different UUID to sdc3
[ 1.780961] md: adding sdb3 ...
[ 1.780994] md: sdb1 has different UUID to sdc3
[ 1.781029] md: adding sda3 ...
[ 1.781063] md: sda1 has different UUID to sdc3
[ 1.781160] md: created md1
[ 1.781193] md: bind<sda3>
[ 1.781229] md: bind<sdb3>
[ 1.781269] md: bind<sdc3>
[ 1.781305] md: running: <sdc3><sdb3><sda3>
[ 1.781441] raid5: device sdc3 operational as raid disk 2
[ 1.781475] raid5: device sdb3 operational as raid disk 1
[ 1.781509] raid5: device sda3 operational as raid disk 0
[ 1.781707] raid5: allocated 3220kB for md1
[ 1.781755] raid5: raid level 5 set md1 active with 3 out of 3 devices,
algorithm 2
[ 1.781807] RAID5 conf printout:
[ 1.781840] --- rd:3 wd:3
[ 1.781873] disk 0, o:1, dev:sda3
[ 1.781907] disk 1, o:1, dev:sdb3
[ 1.781940] disk 2, o:1, dev:sdc3
[ 1.782006] md: considering sdc1 ...
[ 1.782042] md: adding sdc1 ...
[ 1.782077] md: adding sdb1 ...
[ 1.782111] md: adding sda1 ...
[ 1.782144] md: created md0
[ 1.782177] md: bind<sda1>
[ 1.782213] md: bind<sdb1>
[ 1.782250] md: bind<sdc1>
[ 1.782286] md: running: <sdc1><sdb1><sda1>
[ 1.782435] raid1: raid set md0 active with 3 out of 3 mirrors
[ 1.782496] md: ... autorun DONE.
[ 1.782545] md: Loading md3: /dev/sda3
[ 1.782584] md3: unknown partition table
[ 1.782743] md: couldn't update array info. -22
[ 1.782780] md: could not bd_claim sda3.
[ 1.782814] md: md_import_device returned -16
[ 1.782849] md: could not bd_claim sdb3.
[ 1.782883] md: md_import_device returned -16
[ 1.782918] md: could not bd_claim sdc3.
[ 1.782951] md: md_import_device returned -16
[ 1.782986] md: starting md3 failed
[ 1.783062] md1: unknown partition table
[ 1.828578] reiser4: md1: found disk format 4.0.0.
[ 5.831455] VFS: Mounted root (reiser4 filesystem) readonly on device 9:1.
[ 5.831506] Freeing unused kernel memory: 348k freed
[ 9.678802] udev: starting version 145
[ 9.860154] md2:<6> md0: unknown partition table
[ 9.941283] unknown partition table
[ 10.440126] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 10.440143] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 10.440157] r8169 0000:03:00.0: setting latency timer to 64
[ 10.440428] r8169 0000:03:00.0: irq 28 for MSI/MSI-X
[ 10.440505] eth0: RTL8168b/8111b at 0xffffc20012f54000, 00:e0:45:46:00:29,
XID 38000000 IRQ 28
[ 10.441896] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 10.441905] r8169 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.441912] r8169 0000:01:00.0: setting latency timer to 64
[ 10.441963] r8169 0000:01:00.0: irq 29 for MSI/MSI-X
[ 10.442010] eth1: RTL8168c/8111c at 0xffffc2000006a000, 00:19:66:86:ce:12,
XID 3c4000c0 IRQ 29
[ 10.445199] udev: renamed network interface eth1 to eth0
[ 10.463384] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 10.463405] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 10.463437] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 10.463663] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus
number 1
[ 10.463685] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze
workaround
[ 10.463701] ehci_hcd 0000:00:12.2: debug port 1
[ 10.463717] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfddff000
[ 10.474599] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 10.474625] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.474626] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 10.474628] usb usb1: Product: EHCI Host Controller
[ 10.474630] usb usb1: Manufacturer: Linux 2.6.30.5r4 ehci_hcd
[ 10.474631] usb usb1: SerialNumber: 0000:00:12.2
[ 10.474997] usb usb1: configuration #1 chosen from 1 choice
[ 10.475042] hub 1-0:1.0: USB hub found
[ 10.475047] hub 1-0:1.0: 6 ports detected
[ 10.475268] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ
19
[ 10.475293] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 10.475443] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus
number 2
[ 10.475463] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze
workaround
[ 10.475480] ehci_hcd 0000:00:13.2: debug port 1
[ 10.475493] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfddf6800
[ 10.484596] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 10.484608] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.484609] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 10.484611] usb usb2: Product: EHCI Host Controller
[ 10.484612] usb usb2: Manufacturer: Linux 2.6.30.5r4 ehci_hcd
[ 10.484613] usb usb2: SerialNumber: 0000:00:13.2
[ 10.484681] usb usb2: configuration #1 chosen from 1 choice
[ 10.484709] hub 2-0:1.0: USB hub found
[ 10.484714] hub 2-0:1.0: 6 ports detected
[ 10.495237] udev: renamed network interface _rename to eth1
[ 10.520914] Linux video capture interface: v2.00
[ 10.528998] bttv: driver version 0.9.18 loaded
[ 10.529000] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 10.529041] bttv: Bt8xx card found (0).
[ 10.529053] bttv 0000:05:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 10.529063] bttv0: Bt848 (rev 18) at 0000:05:06.0, irq: 21, latency: 128,
mmio: 0xfcfff000
[ 10.529090] bttv0: using: Terratec TerraTV+ Version 1.0 (Bt848)/ Terra
TValue Version 1.0/ Vobis TV-Boostar [card=25,insmod option]
[ 10.529093] IRQ 21/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs
[ 10.529127] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
[ 10.780436] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 10.905489] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
[ 10.905491] usb 1-2: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 10.905492] usb 1-2: Product: USB2.0 Hub
[ 10.905542] usb 1-2: configuration #1 chosen from 1 choice
[ 10.905975] hub 1-2:1.0: USB hub found
[ 10.906238] hub 1-2:1.0: 4 ports detected
[ 11.175248] usb 1-2.1: new low speed USB device using ehci_hcd and address
3
[ 11.265001] usb 1-2.1: New USB device found, idVendor=046d, idProduct=c518
[ 11.265002] usb 1-2.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 11.265003] usb 1-2.1: Product: USB Receiver
[ 11.265005] usb 1-2.1: Manufacturer: Logitech
[ 11.265037] usb 1-2.1: configuration #1 chosen from 1 choice
[ 11.275244] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.1/1-2.1:1.0/input/input3
[ 11.275280] generic-usb 0003:046D:C518.0001: input,hidraw0: USB HID v1.11
Mouse [Logitech USB Receiver] on usb-0000:00:12.2-2.1/input0
[ 11.280796] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.1/1-2.1:1.1/input/input4
[ 11.280842] generic-usb 0003:046D:C518.0002: input,hiddev96,hidraw1: USB
HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-2.1/input1
[ 11.530027] bttv0: tea5757: read timeout
[ 11.530028] bttv0: tuner type=5
[ 11.545289] All bytes are equal. It is not a TEA5767
[ 11.545319] tuner 0-0060: chip found @ 0xc0 (bt848 #0 [sw])
[ 11.548613] tuner-simple 0-0060: creating new instance
[ 11.548616] tuner-simple 0-0060: type set to 5 (Philips PAL_BG (FI1216 and
compatibles))
[ 11.560954] bttv0: audio absent, no audio device found!
[ 11.560985] bttv0: registered device video0
[ 11.560997] bttv0: registered device vbi0
[ 11.860360] reiser4: md2: found disk format 4.0.0.
[ 13.670978] reiser4: md3: found disk format 4.0.0.
[ 55.040308] reiser4: sdc7: found disk format 4.0.0.
[ 67.430760] Adding 7815612k swap on /dev/sda2. Priority:1 extents:1
across:7815612k
[ 67.446393] Adding 7815612k swap on /dev/sdb2. Priority:1 extents:1
across:7815612k
[ 67.469538] Adding 7815612k swap on /dev/sdc2. Priority:1 extents:1
across:7815612k
[ 68.044789] w83627ehf: Found W83627EHG chip at 0x290
[ 68.383049] r8169: eth1: link down
[ 68.405254] r8169: eth0: link up
[ 68.405264] r8169: eth0: link up
[ 71.210164] EMU10K1_Audigy 0000:05:08.0: PCI INT A -> GSI 23 (level, low) -
> IRQ 23
[ 71.217149] Audigy2 value: Special config.
[ 72.532724] fglrx: module license 'Proprietary. (C) 2002 - ATI
Technologies, Starnberg, GERMANY' taints kernel.
[ 72.532733] Disabling lock debugging due to kernel taint
[ 72.580553] [fglrx] Maximum main memory to use for locked dma buffers: 7749
MBytes.
[ 72.580833] [fglrx] vendor: 1002 device: 9501 count: 1
[ 72.581529] [fglrx] ioport: bar 4, base 0xb000, size: 0x100
[ 72.581552] pci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 72.581561] pci 0000:02:00.0: setting latency timer to 64
[ 72.582058] [fglrx] Kernel PAT support is enabled
[ 72.582095] [fglrx] module loaded - fglrx 8.66.1 [Aug 18 2009] with 1
minors
[ 72.754245] fglrx_pci 0000:02:00.0: irq 30 for MSI/MSI-X
[ 72.754717] [fglrx] Firegl kernel thread PID: 3773
[ 74.849325] [fglrx] Gart USWC size:1279 M.
[ 74.849328] [fglrx] Gart cacheable size:508 M.
[ 74.849331] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 74.849333] [fglrx] Reserved FB block: Unshared offset:fbff000, size:401000
[ 74.849334] [fglrx] Reserved FB block: Unshared offset:1fffc000, size:4000
[ 145.542137] reiser4[kopete(3948)]: disable_write_barrier
(fs/reiser4/wander.c:235)[zam-1055]:
[ 145.542139] NOTICE: md3 does not support write barriers, using synchronous
write instead.
lspci:
00:00.0 Host bridge: ATI Technologies Inc RX780/RX790 Chipset Host Bridge
Subsystem: ASRock Incorporation Device 5957
Flags: bus master, 66MHz, medium devsel, latency 0
Memory at <ignored> (64-bit, non-prefetchable)
Capabilities: [c4] HyperTransport: Slave or Primary Interface
Capabilities: [40] HyperTransport: Retry Mode
Capabilities: [54] HyperTransport: UnitID Clumping
Capabilities: [9c] HyperTransport: #1a
00:02.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (external
gfx0 port A) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot-), MSI 00
Capabilities: [a0] MSI: Mask- 64bit- Count=1/1 Enable+
Capabilities: [b0] Subsystem: ASRock Incorporation Device 5957
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information <?>
Capabilities: [110] Virtual Channel <?>
Kernel driver in use: pcieport-driver
00:09.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express
gpp port E) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: fe000000-febfffff
Prefetchable memory behind bridge: 00000000fa000000-00000000fcefffff
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot-), MSI 00
Capabilities: [a0] MSI: Mask- 64bit- Count=1/1 Enable+
Capabilities: [b0] Subsystem: ASRock Incorporation Device 5957
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information <?>
Capabilities: [110] Virtual Channel <?>
Kernel driver in use: pcieport-driver
00:0a.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express
gpp port F) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: 00000000cff00000-00000000cfffffff
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot-), MSI 00
Capabilities: [a0] MSI: Mask- 64bit- Count=1/1 Enable+
Capabilities: [b0] Subsystem: ASRock Incorporation Device 5957
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100] Vendor Specific Information <?>
Capabilities: [110] Virtual Channel <?>
Kernel driver in use: pcieport-driver
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller
[AHCI mode] (prog-if 01 [AHCI 1.0])
Subsystem: ASRock Incorporation Device 4391
Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 22
I/O ports at 9000 [size=8]
I/O ports at 8000 [size=4]
I/O ports at 7000 [size=8]
I/O ports at 6000 [size=4]
I/O ports at 5000 [size=16]
Memory at fddff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [60] Power Management version 2
Capabilities: [70] SATA HBA <?>
Kernel driver in use: ahci
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
(prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device 4397
Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 7
Memory at fddfe000 (32-bit, non-prefetchable) [size=4K]
Kernel modules: ohci-hcd
00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller (prog-
if 10 [OHCI])
Subsystem: ASRock Incorporation Device 4398
Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 7
Memory at fddfd000 (32-bit, non-prefetchable) [size=4K]
Kernel modules: ohci-hcd
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
(prog-if 20 [EHCI])
Subsystem: ASRock Incorporation Device 4396
Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 17
Memory at fddff000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
(prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device 4397
Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 10
Memory at fddfc000 (32-bit, non-prefetchable) [size=4K]
Kernel modules: ohci-hcd
00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller (prog-
if 10 [OHCI])
Subsystem: ASRock Incorporation Device 4398
Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 10
Memory at fddf7000 (32-bit, non-prefetchable) [size=4K]
Kernel modules: ohci-hcd
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
(prog-if 20 [EHCI])
Subsystem: ASRock Incorporation Device 4396
Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 19
Memory at fddf6800 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a)
Subsystem: ASRock Incorporation Device 4385
Flags: 66MHz, medium devsel
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
Kernel modules: i2c-piix4
00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller (prog-
if 8a [Master SecP PriP])
Subsystem: ASRock Incorporation Device 439c
Flags: bus master, 66MHz, medium devsel, latency 0
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at ff00 [size=16]
Capabilities: [70] MSI: Mask- 64bit- Count=1/1 Enable-
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
Subsystem: ASRock Incorporation Device 439d
Flags: bus master, 66MHz, medium devsel, latency 0
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (prog-if 01
[Subtractive decode])
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=05, subordinate=05, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Prefetchable memory behind bridge: fcf00000-fcffffff
00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller
(prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device 4399
Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 10
Memory at fddf5000 (32-bit, non-prefetchable) [size=4K]
Kernel modules: ohci-hcd
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] HyperTransport Configuration
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] Address Map
Flags: fast devsel
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] DRAM Controller
Flags: fast devsel
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] Miscellaneous Control
Flags: fast devsel
Capabilities: [f0] Secure device <?>
Kernel driver in use: k10temp
Kernel modules: k8temp
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] Link Control
Flags: fast devsel
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI
Express Gigabit Ethernet controller (rev 02)
Subsystem: ASRock Incorporation A770CrossFire motherboard
Flags: bus master, fast devsel, latency 0, IRQ 29
I/O ports at a800 [size=256]
Memory at cffff000 (64-bit, prefetchable) [size=4K]
Memory at cffe0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at fdef0000 [disabled] [size=64K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Mask- 64bit+ Count=1/2 Enable+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [b0] MSI-X: Enable- Mask- TabSize=2
Capabilities: [d0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel <?>
Capabilities: [160] Device Serial Number 00-e0-4c-68-12-34-56-78
Kernel driver in use: r8169
Kernel modules: r8169
02:00.0 VGA compatible controller: ATI Technologies Inc Radeon HD 3870 (prog-
if 00 [VGA controller])
Subsystem: Info-Tek Corp. Device 4070
Flags: bus master, fast devsel, latency 0, IRQ 30
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at fdff0000 (64-bit, non-prefetchable) [size=64K]
I/O ports at b000 [size=256]
Expansion ROM at fdfc0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Legacy Endpoint, MSI 00
Capabilities: [a0] MSI: Mask- 64bit+ Count=1/1 Enable+
Capabilities: [100] Vendor Specific Information <?>
Kernel driver in use: fglrx_pci
Kernel modules: fglrx
02:00.1 Audio device: ATI Technologies Inc Radeon HD 3870 Audio device
Subsystem: Info-Tek Corp. Device aa18
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at fdfec000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Legacy Endpoint, MSI 00
Capabilities: [a0] MSI: Mask- 64bit+ Count=1/1 Enable-
Capabilities: [100] Vendor Specific Information <?>
Kernel modules: snd-hda-intel
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI
Express Gigabit Ethernet controller (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express
Gigabit Ethernet controller
Flags: bus master, fast devsel, latency 0, IRQ 28
I/O ports at d800 [size=256]
Memory at febff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at febc0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Capabilities: [48] Vital Product Data
Capabilities: [50] MSI: Mask- 64bit+ Count=1/2 Enable+
Capabilities: [60] Express Endpoint, MSI 00
Capabilities: [84] Vendor Specific Information <?>
Capabilities: [100] Advanced Error Reporting
Capabilities: [12c] Virtual Channel <?>
Capabilities: [148] Device Serial Number 68-81-ec-10-00-00-0d-36
Capabilities: [154] Power Budgeting <?>
Kernel driver in use: r8169
Kernel modules: r8169
05:06.0 Multimedia video controller: Brooktree Corporation Bt848 Video Capture
(rev 12)
Flags: bus master, medium devsel, latency 128, IRQ 21
Memory at fcfff000 (32-bit, prefetchable) [size=4K]
Kernel driver in use: bttv
Kernel modules: bttv
05:08.0 Multimedia audio controller: Creative Labs SB0400 Audigy2 Value
Subsystem: Creative Labs Device 1001
Flags: bus master, medium devsel, latency 128, IRQ 23
I/O ports at e800 [size=64]
Capabilities: [dc] Power Management version 2
Kernel driver in use: EMU10K1_Audigy
Kernel modules: snd-emu10k1
Glück Auf
Volker
[-- Attachment #2: config-2.6.30.5r4 --]
[-- Type: text/plain, Size: 53484 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.30.5
# Tue Aug 18 06:20:30 2009
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="r4"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_EXTRA_PASS=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_SPARSE_IRQ is not set
# CONFIG_X86_MPPARSE is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
# CONFIG_CPU_SUP_CENTAUR is not set
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
# CONFIG_AMD_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_IOMMU_API=y
CONFIG_NR_CPUS=4
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_CPU_DEBUG=m
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
#
# Memory hotplug is currently incompatible with Software Suspend
#
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_MMU_NOTIFIER=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_POWERNOW_K8=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_DMAR=y
CONFIG_DMAR_DEFAULT_ON=y
CONFIG_DMAR_GFX_WA=y
CONFIG_DMAR_FLOPPY_WA=y
# CONFIG_INTR_REMAP is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=m
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
# CONFIG_NETFILTER_NETLINK_LOG is not set
CONFIG_NF_CONNTRACK=m
# CONFIG_NF_CT_ACCT is not set
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CT_PROTO_DCCP is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
# CONFIG_NF_CONNTRACK_FTP is not set
# CONFIG_NF_CONNTRACK_H323 is not set
# CONFIG_NF_CONNTRACK_IRC is not set
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CONNTRACK_TFTP is not set
CONFIG_NF_CT_NETLINK=m
# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_HL=m
# CONFIG_NETFILTER_XT_TARGET_LED is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
CONFIG_NETFILTER_XT_MATCH_MAC=m
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
# CONFIG_IP_NF_TARGET_ULOG is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
# CONFIG_NF_NAT_FTP is not set
# CONFIG_NF_NAT_IRC is not set
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
# CONFIG_NF_NAT_SIP is not set
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_STP=m
CONFIG_GARP=m
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=16
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_93CX6=m
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_FCOE_FNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
# CONFIG_SATA_PMP is not set
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
# CONFIG_ATA_SFF is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=y
CONFIG_MD_RAID6_PQ=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=m
CONFIG_R8169_VLAN=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1680
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1050
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
# CONFIG_MOUSE_PS2_ALPS is not set
CONFIG_MOUSE_PS2_LOGIPS2PP=y
# CONFIG_MOUSE_PS2_SYNAPTICS is not set
# CONFIG_MOUSE_PS2_LIFEBOOK is not set
# CONFIG_MOUSE_PS2_TRACKPOINT is not set
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
CONFIG_FIX_EARLYCON_MEM=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_INTEL is not set
CONFIG_HW_RANDOM_AMD=m
CONFIG_NVRAM=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
CONFIG_I2C_PIIX4=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_BQ27x00 is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
CONFIG_SENSORS_K8TEMP=m
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_DVB_CORE=m
CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L1=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m
# CONFIG_VIDEO_VIVI is not set
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_BT848_DVB is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_CX23885 is not set
# CONFIG_VIDEO_AU0828 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CX18 is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_SOC_CAMERA is not set
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
# CONFIG_USB_GSPCA is not set
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_HDPVR is not set
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
# CONFIG_VIDEO_CX231XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_QUICKCAM_MESSENGER is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_PWC_INPUT_EVDEV is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#
# CONFIG_TTPCI_EEPROM is not set
# CONFIG_DVB_AV7110 is not set
# CONFIG_DVB_BUDGET_CORE is not set
#
# Supported USB Adapters
#
# CONFIG_DVB_USB is not set
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set
# CONFIG_DVB_SIANO_SMS1XXX is not set
#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_FLEXCOP is not set
#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m
#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set
#
# Supported SDMC DM1105 Adapters
#
# CONFIG_DVB_DM1105 is not set
#
# Supported DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
CONFIG_DVB_CX24110=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_LGDT330X=m
# CONFIG_DAB is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
# CONFIG_SND_HDA_CODEC_VIA is not set
CONFIG_SND_HDA_CODEC_ATIHDMI=y
# CONFIG_SND_HDA_CODEC_NVHDMI is not set
# CONFIG_SND_HDA_CODEC_INTELHDMI is not set
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not set
# CONFIG_SND_HDA_GENERIC is not set
# CONFIG_SND_HDA_POWER_SAVE is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_USB is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_GREENASIA_FF is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=m
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I3000 is not set
# CONFIG_EDAC_X38 is not set
# CONFIG_EDAC_I5400 is not set
# CONFIG_EDAC_I5000 is not set
# CONFIG_EDAC_I5100 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
CONFIG_REISER4_FS=y
# CONFIG_REISER4_DEBUG is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
# CONFIG_FRAME_POINTER is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FTRACE_SYSCALLS=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not set
# CONFIG_EARLY_PRINTK is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
CONFIG_IO_DELAY_NONE=y
CONFIG_DEFAULT_IO_DELAY_TYPE=3
# CONFIG_OPTIMIZE_INLINING is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_IMA is not set
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_ZLIB=m
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
# CONFIG_KVM_INTEL is not set
CONFIG_KVM_AMD=m
# CONFIG_KVM_TRACE is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: amd64 + mtrr: only 3.1gb of 8gb are covered, kernel 2.6.30 and earlier.
2009-08-21 16:14 amd64 + mtrr: only 3.1gb of 8gb are covered, kernel 2.6.30 and earlier Volker Armin Hemmann
@ 2009-08-22 5:43 ` Robert Hancock
2009-08-22 18:48 ` Yinghai Lu
[not found] ` <200908222126.31390.volkerarmin@googlemail.com>
2 siblings, 0 replies; 15+ messages in thread
From: Robert Hancock @ 2009-08-22 5:43 UTC (permalink / raw)
To: Volker Armin Hemmann; +Cc: linux-kernel
On 08/21/2009 10:14 AM, Volker Armin Hemmann wrote:
> Hi,
>
> I have an amd64 system with 8GB ram. Of these only 3.1GB are currently covered
> with mtrr:
> cat /proc/mtrr
> reg00: base=0x000000000 ( 0MB), size= 2048MB, count=1: write-back
> reg01: base=0x080000000 ( 2048MB), size= 1024MB, count=1: write-back
> reg02: base=0x0c0000000 ( 3072MB), size= 128MB, count=1: write-back
>
> This is with a Phenom II X4. Mobo is an Asrock A770Crossfire with AMD 770
> chipset. Ram is 1066 ddr2 running at 800.
>
> Before that I had a X2 6000 where I had one more mtrr, covering additional
> 256mb with 6gb ram total.
>
> When I use the opensource driver, I get a 'mtrr disabled' message when X
> starts, nothing like that with fglrx. The results are the same.
>
> Is there anything that I can do about it? I already played with mtrr cleanup
> options - without any results.
I seem to recall hearing that on some newer AMD CPUs the memory above
4GB is either hardcoded to cacheable or set that way via some other
mechanism such that MTRRs aren't needed for it. Maybe someone else can
provide more details.
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: amd64 + mtrr: only 3.1gb of 8gb are covered, kernel 2.6.30 and earlier.
2009-08-21 16:14 amd64 + mtrr: only 3.1gb of 8gb are covered, kernel 2.6.30 and earlier Volker Armin Hemmann
2009-08-22 5:43 ` Robert Hancock
@ 2009-08-22 18:48 ` Yinghai Lu
2009-08-22 18:54 ` Volker Armin Hemmann
[not found] ` <200908222126.31390.volkerarmin@googlemail.com>
2 siblings, 1 reply; 15+ messages in thread
From: Yinghai Lu @ 2009-08-22 18:48 UTC (permalink / raw)
To: Volker Armin Hemmann; +Cc: linux-kernel
On Fri, Aug 21, 2009 at 9:14 AM, Volker Armin
Hemmann<volkerarmin@googlemail.com> wrote:
> Hi,
>
> I have an amd64 system with 8GB ram. Of these only 3.1GB are currently covered
> with mtrr:
> cat /proc/mtrr
> reg00: base=0x000000000 ( 0MB), size= 2048MB, count=1: write-back
> reg01: base=0x080000000 ( 2048MB), size= 1024MB, count=1: write-back
> reg02: base=0x0c0000000 ( 3072MB), size= 128MB, count=1: write-back
>
> This is with a Phenom II X4. Mobo is an Asrock A770Crossfire with AMD 770
> chipset. Ram is 1066 ddr2 running at 800.
>
> Before that I had a X2 6000 where I had one more mtrr, covering additional
> 256mb with 6gb ram total.
>
> When I use the opensource driver, I get a 'mtrr disabled' message when X
> starts, nothing like that with fglrx. The results are the same.
>
> Is there anything that I can do about it? I already played with mtrr cleanup
> options - without any results.
>
> Except for reiser4 the kernel is 'vanilla', config is attached, dmesg and lspci
> are folloiwing:
>
> dmesg:
> [ 0.000000] Linux version 2.6.30.5r4 (root@energy) (gcc version 4.4.1
> (Gentoo 4.4.1 p1.0) ) #1 SMP Tue Aug 18 06:28:18 CEST 2009
> [ 0.000000] Command line: root=/dev/md1 md=3,/dev/sda3,/dev/sdb3,/dev/sdc3
> nmi_watchdog=0 mtrr_spare_reg_nr=1
> [ 0.000000] KERNEL supported cpus:
> [ 0.000000] Intel GenuineIntel
> [ 0.000000] AMD AuthenticAMD
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7eb0000 (usable)
> [ 0.000000] BIOS-e820: 00000000c7eb0000 - 00000000c7ec0000 (ACPI data)
> [ 0.000000] BIOS-e820: 00000000c7ec0000 - 00000000c7ef0000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 00000000c7ef0000 - 00000000c7f00000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> [ 0.000000] BIOS-e820: 0000000100000000 - 0000000238000000 (usable)
> [ 0.000000] DMI present.
> [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
> [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable)
> ==> (reserved)
> [ 0.000000] last_pfn = 0x238000 max_arch_pfn = 0x100000000
> [ 0.000000] MTRR default type: uncachable
> [ 0.000000] MTRR fixed ranges enabled:
> [ 0.000000] 00000-9FFFF write-back
> [ 0.000000] A0000-EFFFF uncachable
> [ 0.000000] F0000-FFFFF write-protect
> [ 0.000000] MTRR variable ranges enabled:
> [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
> [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
> [ 0.000000] 2 base 0000C0000000 mask FFFFF8000000 write-back
> [ 0.000000] 3 disabled
> [ 0.000000] 4 disabled
> [ 0.000000] 5 disabled
> [ 0.000000] 6 disabled
> [ 0.000000] 7 disabled
> [ 0.000000] TOM2: 0000000238000000 aka 9088M
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
> 0x7010600070106
> [ 0.000000] e820 update range: 00000000c8000000 - 0000000100000000 (usable)
> ==> (reserved)
...
>
> 02:00.0 VGA compatible controller: ATI Technologies Inc Radeon HD 3870 (prog-
> if 00 [VGA controller])
> Subsystem: Info-Tek Corp. Device 4070
> Flags: bus master, fast devsel, latency 0, IRQ 30
> Memory at d0000000 (64-bit, prefetchable) [size=256M]
> Memory at fdff0000 (64-bit, non-prefetchable) [size=64K]
> I/O ports at b000 [size=256]
> Expansion ROM at fdfc0000 [disabled] [size=128K]
> Capabilities: [50] Power Management version 3
> Capabilities: [58] Express Legacy Endpoint, MSI 00
> Capabilities: [a0] MSI: Mask- 64bit+ Count=1/1 Enable+
> Capabilities: [100] Vendor Specific Information <?>
> Kernel driver in use: fglrx_pci
> Kernel modules: fglrx
after your start X server, how about cat /proc/mtrr?
thought there should be one WC entry about 256M... for graphics card.
YH
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: amd64 + mtrr: only 3.1gb of 8gb are covered, kernel 2.6.30 and earlier.
2009-08-22 18:48 ` Yinghai Lu
@ 2009-08-22 18:54 ` Volker Armin Hemmann
2009-08-22 19:04 ` Yinghai Lu
0 siblings, 1 reply; 15+ messages in thread
From: Volker Armin Hemmann @ 2009-08-22 18:54 UTC (permalink / raw)
To: Yinghai Lu; +Cc: linux-kernel
On Samstag 22 August 2009, Yinghai Lu wrote:
> On Fri, Aug 21, 2009 at 9:14 AM, Volker Armin
>
> Hemmann<volkerarmin@googlemail.com> wrote:
> > Hi,
> >
> > I have an amd64 system with 8GB ram. Of these only 3.1GB are currently
> > covered with mtrr:
> > cat /proc/mtrr
> > reg00: base=0x000000000 ( 0MB), size= 2048MB, count=1: write-back
> > reg01: base=0x080000000 ( 2048MB), size= 1024MB, count=1: write-back
> > reg02: base=0x0c0000000 ( 3072MB), size= 128MB, count=1: write-back
> >
> > This is with a Phenom II X4. Mobo is an Asrock A770Crossfire with AMD 770
> > chipset. Ram is 1066 ddr2 running at 800.
> >
> > Before that I had a X2 6000 where I had one more mtrr, covering
> > additional 256mb with 6gb ram total.
> >
> > When I use the opensource driver, I get a 'mtrr disabled' message when X
> > starts, nothing like that with fglrx. The results are the same.
> >
> > Is there anything that I can do about it? I already played with mtrr
> > cleanup options - without any results.
> >
> > Except for reiser4 the kernel is 'vanilla', config is attached, dmesg and
> > lspci are folloiwing:
> >
> > dmesg:
> > [ 0.000000] Linux version 2.6.30.5r4 (root@energy) (gcc version 4.4.1
> > (Gentoo 4.4.1 p1.0) ) #1 SMP Tue Aug 18 06:28:18 CEST 2009
> > [ 0.000000] Command line: root=/dev/md1
> > md=3,/dev/sda3,/dev/sdb3,/dev/sdc3 nmi_watchdog=0 mtrr_spare_reg_nr=1
> > [ 0.000000] KERNEL supported cpus:
> > [ 0.000000] Intel GenuineIntel
> > [ 0.000000] AMD AuthenticAMD
> > [ 0.000000] BIOS-provided physical RAM map:
> > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> > [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> > [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
> > [ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7eb0000 (usable)
> > [ 0.000000] BIOS-e820: 00000000c7eb0000 - 00000000c7ec0000 (ACPI
> > data) [ 0.000000] BIOS-e820: 00000000c7ec0000 - 00000000c7ef0000
> > (ACPI NVS) [ 0.000000] BIOS-e820: 00000000c7ef0000 - 00000000c7f00000
> > (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000
> > (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000238000000
> > (usable) [ 0.000000] DMI present.
> > [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working
> > around it. [ 0.000000] e820 update range: 0000000000000000 -
> > 0000000000010000 (usable) ==> (reserved)
> > [ 0.000000] last_pfn = 0x238000 max_arch_pfn = 0x100000000
> > [ 0.000000] MTRR default type: uncachable
> > [ 0.000000] MTRR fixed ranges enabled:
> > [ 0.000000] 00000-9FFFF write-back
> > [ 0.000000] A0000-EFFFF uncachable
> > [ 0.000000] F0000-FFFFF write-protect
> > [ 0.000000] MTRR variable ranges enabled:
> > [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
> > [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
> > [ 0.000000] 2 base 0000C0000000 mask FFFFF8000000 write-back
> > [ 0.000000] 3 disabled
> > [ 0.000000] 4 disabled
> > [ 0.000000] 5 disabled
> > [ 0.000000] 6 disabled
> > [ 0.000000] 7 disabled
> > [ 0.000000] TOM2: 0000000238000000 aka 9088M
> > [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
> > 0x7010600070106
> > [ 0.000000] e820 update range: 00000000c8000000 - 0000000100000000
> > (usable) ==> (reserved)
>
> ...
>
> > 02:00.0 VGA compatible controller: ATI Technologies Inc Radeon HD 3870
> > (prog- if 00 [VGA controller])
> > Subsystem: Info-Tek Corp. Device 4070
> > Flags: bus master, fast devsel, latency 0, IRQ 30
> > Memory at d0000000 (64-bit, prefetchable) [size=256M]
> > Memory at fdff0000 (64-bit, non-prefetchable) [size=64K]
> > I/O ports at b000 [size=256]
> > Expansion ROM at fdfc0000 [disabled] [size=128K]
> > Capabilities: [50] Power Management version 3
> > Capabilities: [58] Express Legacy Endpoint, MSI 00
> > Capabilities: [a0] MSI: Mask- 64bit+ Count=1/1 Enable+
> > Capabilities: [100] Vendor Specific Information <?>
> > Kernel driver in use: fglrx_pci
> > Kernel modules: fglrx
>
> after your start X server, how about cat /proc/mtrr?
>
> thought there should be one WC entry about 256M... for graphics card.
>
> YH
running X:
cat /proc/mtrr
reg00: base=0x000000000 ( 0MB), size= 2048MB, count=1: write-back
reg01: base=0x080000000 ( 2048MB), size= 1024MB, count=1: write-back
reg02: base=0x0c0000000 ( 3072MB), size= 128MB, count=1: write-back
back with my X2 6000 and 4 and 6gb ram, I indeed got another mtrr with 256mb.
But with the phenom and 8gb I don't get it. Neither with fglrx nor with xorg's
radeon driver. Radeon posts a message to dmesg about disabled mtrr.
Glück Auf,
Volker
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: amd64 + mtrr: only 3.1gb of 8gb are covered, kernel 2.6.30 and earlier.
2009-08-22 18:54 ` Volker Armin Hemmann
@ 2009-08-22 19:04 ` Yinghai Lu
0 siblings, 0 replies; 15+ messages in thread
From: Yinghai Lu @ 2009-08-22 19:04 UTC (permalink / raw)
To: Volker Armin Hemmann; +Cc: linux-kernel
On Sat, Aug 22, 2009 at 11:54 AM, Volker Armin
Hemmann<volkerarmin@googlemail.com> wrote:
> On Samstag 22 August 2009, Yinghai Lu wrote:
>> On Fri, Aug 21, 2009 at 9:14 AM, Volker Armin
>>
>> Hemmann<volkerarmin@googlemail.com> wrote:
>> > Hi,
>> >
>> > I have an amd64 system with 8GB ram. Of these only 3.1GB are currently
>> > covered with mtrr:
>> > cat /proc/mtrr
>> > reg00: base=0x000000000 ( 0MB), size= 2048MB, count=1: write-back
>> > reg01: base=0x080000000 ( 2048MB), size= 1024MB, count=1: write-back
>> > reg02: base=0x0c0000000 ( 3072MB), size= 128MB, count=1: write-back
>> >
>> > This is with a Phenom II X4. Mobo is an Asrock A770Crossfire with AMD 770
>> > chipset. Ram is 1066 ddr2 running at 800.
>> >
>> > Before that I had a X2 6000 where I had one more mtrr, covering
>> > additional 256mb with 6gb ram total.
>> >
>> > When I use the opensource driver, I get a 'mtrr disabled' message when X
>> > starts, nothing like that with fglrx. The results are the same.
>> >
>> > Is there anything that I can do about it? I already played with mtrr
>> > cleanup options - without any results.
>> >
>> > Except for reiser4 the kernel is 'vanilla', config is attached, dmesg and
>> > lspci are folloiwing:
>> >
>> > dmesg:
>> > [ 0.000000] Linux version 2.6.30.5r4 (root@energy) (gcc version 4.4.1
>> > (Gentoo 4.4.1 p1.0) ) #1 SMP Tue Aug 18 06:28:18 CEST 2009
>> > [ 0.000000] Command line: root=/dev/md1
>> > md=3,/dev/sda3,/dev/sdb3,/dev/sdc3 nmi_watchdog=0 mtrr_spare_reg_nr=1
>> > [ 0.000000] KERNEL supported cpus:
>> > [ 0.000000] Intel GenuineIntel
>> > [ 0.000000] AMD AuthenticAMD
>> > [ 0.000000] BIOS-provided physical RAM map:
>> > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>> > [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>> > [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
>> > [ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7eb0000 (usable)
>> > [ 0.000000] BIOS-e820: 00000000c7eb0000 - 00000000c7ec0000 (ACPI
>> > data) [ 0.000000] BIOS-e820: 00000000c7ec0000 - 00000000c7ef0000
>> > (ACPI NVS) [ 0.000000] BIOS-e820: 00000000c7ef0000 - 00000000c7f00000
>> > (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000
>> > (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000238000000
>> > (usable) [ 0.000000] DMI present.
>> > [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working
>> > around it. [ 0.000000] e820 update range: 0000000000000000 -
>> > 0000000000010000 (usable) ==> (reserved)
>> > [ 0.000000] last_pfn = 0x238000 max_arch_pfn = 0x100000000
>> > [ 0.000000] MTRR default type: uncachable
>> > [ 0.000000] MTRR fixed ranges enabled:
>> > [ 0.000000] 00000-9FFFF write-back
>> > [ 0.000000] A0000-EFFFF uncachable
>> > [ 0.000000] F0000-FFFFF write-protect
>> > [ 0.000000] MTRR variable ranges enabled:
>> > [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
>> > [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
>> > [ 0.000000] 2 base 0000C0000000 mask FFFFF8000000 write-back
>> > [ 0.000000] 3 disabled
>> > [ 0.000000] 4 disabled
>> > [ 0.000000] 5 disabled
>> > [ 0.000000] 6 disabled
>> > [ 0.000000] 7 disabled
>> > [ 0.000000] TOM2: 0000000238000000 aka 9088M
>> > [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
>> > 0x7010600070106
>> > [ 0.000000] e820 update range: 00000000c8000000 - 0000000100000000
>> > (usable) ==> (reserved)
>>
>> ...
>>
>> > 02:00.0 VGA compatible controller: ATI Technologies Inc Radeon HD 3870
>> > (prog- if 00 [VGA controller])
>> > Subsystem: Info-Tek Corp. Device 4070
>> > Flags: bus master, fast devsel, latency 0, IRQ 30
>> > Memory at d0000000 (64-bit, prefetchable) [size=256M]
>> > Memory at fdff0000 (64-bit, non-prefetchable) [size=64K]
>> > I/O ports at b000 [size=256]
>> > Expansion ROM at fdfc0000 [disabled] [size=128K]
>> > Capabilities: [50] Power Management version 3
>> > Capabilities: [58] Express Legacy Endpoint, MSI 00
>> > Capabilities: [a0] MSI: Mask- 64bit+ Count=1/1 Enable+
>> > Capabilities: [100] Vendor Specific Information <?>
>> > Kernel driver in use: fglrx_pci
>> > Kernel modules: fglrx
>>
>> after your start X server, how about cat /proc/mtrr?
>>
>> thought there should be one WC entry about 256M... for graphics card.
>>
>> YH
>
> running X:
>
> cat /proc/mtrr
> reg00: base=0x000000000 ( 0MB), size= 2048MB, count=1: write-back
> reg01: base=0x080000000 ( 2048MB), size= 1024MB, count=1: write-back
> reg02: base=0x0c0000000 ( 3072MB), size= 128MB, count=1: write-back
>
> back with my X2 6000 and 4 and 6gb ram, I indeed got another mtrr with 256mb.
> But with the phenom and 8gb I don't get it. Neither with fglrx nor with xorg's
> radeon driver. Radeon posts a message to dmesg about disabled mtrr.
>
you should have
reg03: base=0x0d0000000 ( 3200MB), size= 256MB, count=1: write-combining
do you notice any performance degrade without that entry?
YH
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: amd64 + mtrr: only 3.1gb of 8gb are covered, kernel 2.6.30 and earlier.
[not found] ` <86802c440908222322s44957498s72a76940f89271cf@mail.gmail.com>
@ 2009-08-23 9:11 ` Volker Armin Hemmann
2009-08-27 1:13 ` Volker Armin Hemmann
1 sibling, 0 replies; 15+ messages in thread
From: Volker Armin Hemmann @ 2009-08-23 9:11 UTC (permalink / raw)
To: Yinghai Lu, linux-kernel
On Sonntag 23 August 2009, Yinghai Lu wrote:
> On Sat, Aug 22, 2009 at 12:26 PM, Volker Armin
>
> Hemmann<volkerarmin@googlemail.com> wrote:
> > when I went from 4gb to 6gb I had a performance degradation. Since the
> > 8gb are faster and the new cpu is faster, I don't see degradation. But I
> > wonder how much better performance could be with 'correct' mtrr.
>
> that is weird. with 4g should have mem hole remapping.
>
> do you still have /proc/mtrr for 6g setup?
>
> YH
I have it here:
http://marc.info/?l=linux-kernel&m=124336823415460&w=2
Glück Auf,
Volker
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: amd64 + mtrr: only 3.1gb of 8gb are covered, kernel 2.6.30 and earlier.
[not found] ` <86802c440908222322s44957498s72a76940f89271cf@mail.gmail.com>
2009-08-23 9:11 ` Volker Armin Hemmann
@ 2009-08-27 1:13 ` Volker Armin Hemmann
2009-08-27 7:13 ` Yinghai Lu
1 sibling, 1 reply; 15+ messages in thread
From: Volker Armin Hemmann @ 2009-08-27 1:13 UTC (permalink / raw)
To: Yinghai Lu, linux-kernel
[-- Attachment #1: Type: Text/Plain, Size: 1364 bytes --]
Hi,
On Sonntag 23 August 2009, Yinghai Lu wrote:
> On Sat, Aug 22, 2009 at 12:26 PM, Volker Armin
>
> Hemmann<volkerarmin@googlemail.com> wrote:
> > when I went from 4gb to 6gb I had a performance degradation. Since the
> > 8gb are faster and the new cpu is faster, I don't see degradation. But I
> > wonder how much better performance could be with 'correct' mtrr.
>
> that is weird. with 4g should have mem hole remapping.
>
> do you still have /proc/mtrr for 6g setup?
>
> YH
some more information, mtrr of 8gb with my X2 6000:
reg00: base=0x000000000 ( 0MB), size= 2048MB, count=1: write-back
reg01: base=0x080000000 ( 2048MB), size= 1024MB, count=1: write-back
reg02: base=0x0c0000000 ( 3072MB), size= 128MB, count=1: write-back
reg03: base=0x0c8000000 ( 3200MB), size= 64MB, count=1: write-back
reg04: base=0x0cc000000 ( 3264MB), size= 32MB, count=1: write-back
reg05: base=0x0ce000000 ( 3296MB), size= 16MB, count=1: write-back
from June with 2.6.30, dmesg from that incident is attached
compared that with the mtrr with my X4:
reg00: base=0x000000000 ( 0MB), size= 2048MB, count=1: write-back
reg01: base=0x080000000 ( 2048MB), size= 1024MB, count=1: write-back
reg02: base=0x0c0000000 ( 3072MB), size= 128MB, count=1: write-back
just ignore the fgrlx parts - whenever I checked it did not made a difference
if X was started or not.
[-- Attachment #2: dmesg_8gb_x2_6000 --]
[-- Type: text/plain, Size: 64742 bytes --]
[ 0.000000] Linux version 2.6.30r4 (root@energy) (gcc version 4.4.0 (Gentoo 4.4.0 p1.0) ) #2 SMP Sat Jun 27 00:46:23 CEST 2009
[ 0.000000] Command line: root=/dev/md1 md=3,/dev/sda3,/dev/sdb3,/dev/sdc3 nmi_watchdog=0 amd_iommu_size=128M mtrr_spare_reg_nr=0
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000ceeb0000 (usable)
[ 0.000000] BIOS-e820: 00000000ceeb0000 - 00000000ceec0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ceec0000 - 00000000ceef0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ceef0000 - 00000000cef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000231000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x231000 max_arch_pfn = 0x100000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFF8000000 write-back
[ 0.000000] 3 base 00C8000000 mask FFFC000000 write-back
[ 0.000000] 4 base 00CC000000 mask FFFE000000 write-back
[ 0.000000] 5 base 00CE000000 mask FFFF000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000231000000 aka 8976M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000cf000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xceeb0 max_arch_pfn = 0x100000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000ceeb0000
[ 0.000000] 0000000000 - 00cee00000 page 2M
[ 0.000000] 00cee00000 - 00ceeb0000 page 4k
[ 0.000000] kernel direct mapping tables up to ceeb0000 @ 10000-16000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000231000000
[ 0.000000] 0100000000 - 0231000000 page 2M
[ 0.000000] kernel direct mapping tables up to 231000000 @ 14000-1e000
[ 0.000000] ACPI: RSDP 00000000000fa7b0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000ceeb0000 00040 (v01 121508 RSDT1922 20081215 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000ceeb0200 00084 (v02 A_M_I OEMFACP 12000601 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000ceeb0440 08512 (v01 AS140 AS140115 00000115 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000ceec0000 00040
[ 0.000000] ACPI: APIC 00000000ceeb0390 0006C (v01 121508 APIC1922 20081215 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000ceeb0400 0003C (v01 121508 OEMMCFG 20081215 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000ceec0040 00071 (v01 121508 OEMB1922 20081215 MSFT 00000097)
[ 0.000000] ACPI: AAFT 00000000ceeb8960 00027 (v01 121508 OEMAAFT 20081215 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000ceeb8990 00038 (v01 121508 OEMHPET 20081215 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000ceeb89d0 0030E (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0231000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 000156ffbc] TEXT DATA BSS ==> [0001000000 - 000156ffbc]
[ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #4 [0001570000 - 0001570133] BRK ==> [0001570000 - 0001570133]
[ 0.000000] #5 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
[ 0.000000] #6 [0000014000 - 0000019000] PGTABLE ==> [0000014000 - 0000019000]
[ 0.000000] [ffffe20000000000-ffffe20007dfffff] PMD -> [ffff880028200000-ffff88002fffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00231000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000ceeb0
[ 0.000000] 0: 0x00100000 -> 0x00231000
[ 0.000000] On node 0 totalpages: 2096703
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 108 pages reserved
[ 0.000000] DMA zone: 3819 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 829160 pages, LIFO batch:31
[ 0.000000] Normal zone: 17080 pages used for memmap
[ 0.000000] Normal zone: 1232200 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] 4 Processors exceeds NR_CPUS limit of 2
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000ceeb0000 - 00000000ceec0000
[ 0.000000] PM: Registered nosave memory: 00000000ceec0000 - 00000000ceef0000
[ 0.000000] PM: Registered nosave memory: 00000000ceef0000 - 00000000cef00000
[ 0.000000] PM: Registered nosave memory: 00000000cef00000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: cef00000:31000000)
[ 0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 24 pages at ffff880028034000, static data 67744 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065179
[ 0.000000] Kernel command line: root=/dev/md1 md=3,/dev/sda3,/dev/sdb3,/dev/sdc3 nmi_watchdog=0 amd_iommu_size=128M mtrr_spare_reg_nr=0
[ 0.000000] md: Will configure md3 (super-block) from /dev/sda3,/dev/sdb3,/dev/sdc3, below.
[ 0.000000] Initializing CPU#0
[ 0.000000] NR_IRQS:320
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3000.107 MHz processor.
[ 0.003333] Console: colour VGA+ 80x25
[ 0.003333] console [tty0] enabled
[ 0.003333] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.003333] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003333] Checking aperture...
[ 0.003333] No AGP bridge found
[ 0.003333] Node 0: aperture @ e8c8000000 size 32 MB
[ 0.003333] Aperture beyond 4GB. Ignoring.
[ 0.003333] Your BIOS doesn't leave a aperture memory hole
[ 0.003333] Please enable the IOMMU option in the BIOS setup
[ 0.003333] This costs you 64 MB of RAM
[ 0.003333] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.003333] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.003333] Memory: 8172932k/9191424k available (3234k kernel code, 804612k absent, 212996k reserved, 1300k data, 348k init)
[ 0.003333] hpet clockevent registered
[ 0.003333] HPET: 4 timers in total, 1 timers will be used for per-cpu timer
[ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 6002.22 BogoMIPS (lpj=10000356)
[ 0.003480] Mount-cache hash table entries: 256
[ 0.003616] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.003669] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.003721] tseg: 0000000000
[ 0.003726] CPU: Physical Processor ID: 0
[ 0.003778] CPU: Processor Core ID: 0
[ 0.003835] using C1E aware idle routine
[ 0.003896] ACPI: Core revision 20090320
[ 0.011804] Setting APIC routing to flat
[ 0.012172] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.045231] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[ 0.046666] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.003333] Initializing CPU#1
[ 0.003333] Calibrating delay using timer specific routine.. 6002.12 BogoMIPS (lpj=10000202)
[ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.003333] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 1
[ 0.003333] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.136931] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[ 0.137414] Brought up 2 CPUs
[ 0.137466] Total of 2 processors activated (12005.34 BogoMIPS).
[ 0.137710] net_namespace: 608 bytes
[ 0.137824] xor: automatically using best checksumming function: generic_sse
[ 0.153334] generic_sse: 9249.600 MB/sec
[ 0.153386] xor: using function: generic_sse (9249.600 MB/sec)
[ 0.153459] Time: 14:03:02 Date: 06/28/09
[ 0.153533] NET: Registered protocol family 16
[ 0.153710] node 0 link 0: io port [1000, ffffff]
[ 0.153713] TOM: 00000000cf000000 aka 3312M
[ 0.153767] node 0 link 0: mmio [e0000000, efffffff]
[ 0.153769] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.153771] node 0 link 0: mmio [a0000, bffff]
[ 0.153773] node 0 link 0: mmio [cf000000, dfffffff]
[ 0.153774] TOM2: 0000000231000000 aka 8976M
[ 0.153827] bus: [00,07] on node 0 link 0
[ 0.153828] bus: 00 index 0 io port: [0, ffff]
[ 0.153830] bus: 00 index 1 mmio: [cf000000, ffffffff]
[ 0.153831] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.153833] bus: 00 index 3 mmio: [231000000, fcffffffff]
[ 0.153837] ACPI: bus type pci registered
[ 0.153949] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.154003] PCI: Not using MMCONFIG.
[ 0.154055] PCI: Using configuration type 1 for base access
[ 0.155427] bio: create slab <bio-0> at 0
[ 0.155885] ACPI: EC: Look up EC in DSDT
[ 0.163220] ACPI: Interpreter enabled
[ 0.163273] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.163424] ACPI: Using IOAPIC for interrupt routing
[ 0.163518] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.166738] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.174519] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.180654] ACPI: No dock devices found.
[ 0.180898] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.181006] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
[ 0.181062] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.181116] pci 0000:00:02.0: PME# disabled
[ 0.181207] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.181261] pci 0000:00:09.0: PME# disabled
[ 0.181345] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.181398] pci 0000:00:0a.0: PME# disabled
[ 0.181500] pci 0000:00:11.0: reg 10 io port: [0xa000-0xa007]
[ 0.181506] pci 0000:00:11.0: reg 14 io port: [0x9000-0x9003]
[ 0.181513] pci 0000:00:11.0: reg 18 io port: [0x8000-0x8007]
[ 0.181520] pci 0000:00:11.0: reg 1c io port: [0x7000-0x7003]
[ 0.181526] pci 0000:00:11.0: reg 20 io port: [0x6000-0x600f]
[ 0.181533] pci 0000:00:11.0: reg 24 32bit mmio: [0xfddff800-0xfddffbff]
[ 0.181587] pci 0000:00:12.0: reg 10 32bit mmio: [0xfddfe000-0xfddfefff]
[ 0.181643] pci 0000:00:12.1: reg 10 32bit mmio: [0xfddfd000-0xfddfdfff]
[ 0.181718] pci 0000:00:12.2: reg 10 32bit mmio: [0xfddff000-0xfddff0ff]
[ 0.181773] pci 0000:00:12.2: supports D1 D2
[ 0.181774] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.181829] pci 0000:00:12.2: PME# disabled
[ 0.181912] pci 0000:00:13.0: reg 10 32bit mmio: [0xfddfc000-0xfddfcfff]
[ 0.181969] pci 0000:00:13.1: reg 10 32bit mmio: [0xfddf7000-0xfddf7fff]
[ 0.182043] pci 0000:00:13.2: reg 10 32bit mmio: [0xfddf6800-0xfddf68ff]
[ 0.182097] pci 0000:00:13.2: supports D1 D2
[ 0.182099] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.182154] pci 0000:00:13.2: PME# disabled
[ 0.182326] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[ 0.182333] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[ 0.182340] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.182346] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.182353] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
[ 0.182491] pci 0000:00:14.5: reg 10 32bit mmio: [0xfddf5000-0xfddf5fff]
[ 0.182625] pci 0000:02:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.182633] pci 0000:02:00.0: reg 18 64bit mmio: [0xfdff0000-0xfdffffff]
[ 0.182639] pci 0000:02:00.0: reg 20 io port: [0xc000-0xc0ff]
[ 0.182647] pci 0000:02:00.0: reg 30 32bit mmio: [0xfdfc0000-0xfdfdffff]
[ 0.182665] pci 0000:02:00.0: supports D1 D2
[ 0.182698] pci 0000:02:00.1: reg 10 64bit mmio: [0xfdfec000-0xfdfeffff]
[ 0.182733] pci 0000:02:00.1: supports D1 D2
[ 0.182789] pci 0000:00:02.0: bridge io port: [0xc000-0xcfff]
[ 0.182792] pci 0000:00:02.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
[ 0.182795] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.182843] pci 0000:00:09.0: bridge io port: [0xd000-0xdfff]
[ 0.182845] pci 0000:00:09.0: bridge 32bit mmio: [0xfe000000-0xfeafffff]
[ 0.182849] pci 0000:00:09.0: bridge 64bit mmio pref: [0xfa000000-0xfcefffff]
[ 0.182885] pci 0000:01:00.0: reg 10 io port: [0xb800-0xb8ff]
[ 0.182900] pci 0000:01:00.0: reg 18 64bit mmio: [0xcffff000-0xcfffffff]
[ 0.182910] pci 0000:01:00.0: reg 20 64bit mmio: [0xcffe0000-0xcffeffff]
[ 0.182917] pci 0000:01:00.0: reg 30 32bit mmio: [0xfdef0000-0xfdefffff]
[ 0.182948] pci 0000:01:00.0: supports D1 D2
[ 0.182949] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.183004] pci 0000:01:00.0: PME# disabled
[ 0.183115] pci 0000:00:0a.0: bridge io port: [0xb000-0xbfff]
[ 0.183117] pci 0000:00:0a.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.183121] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xcff00000-0xcfffffff]
[ 0.183172] pci 0000:05:05.0: reg 10 io port: [0xe800-0xe8ff]
[ 0.183180] pci 0000:05:05.0: reg 14 32bit mmio: [0xfebffc00-0xfebffdff]
[ 0.183236] pci 0000:05:05.0: supports D1 D2
[ 0.183238] pci 0000:05:05.0: PME# supported from D1 D2 D3hot D3cold
[ 0.183294] pci 0000:05:05.0: PME# disabled
[ 0.183362] pci 0000:05:06.0: reg 10 32bit mmio: [0xfcfff000-0xfcffffff]
[ 0.183448] pci 0000:05:08.0: reg 10 io port: [0xe400-0xe43f]
[ 0.183509] pci 0000:05:08.0: supports D1 D2
[ 0.183555] pci 0000:00:14.4: transparent bridge
[ 0.183610] pci 0000:00:14.4: bridge io port: [0xe000-0xefff]
[ 0.183614] pci 0000:00:14.4: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[ 0.183618] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfcf00000-0xfcffffff]
[ 0.183632] pci_bus 0000:00: on NUMA node 0
[ 0.183637] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.183794] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.183841] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.183889] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.183960] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 0.187037] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
[ 0.187324] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
[ 0.187609] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[ 0.187894] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[ 0.188178] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 *11 12 14 15)
[ 0.188464] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 *10 11 12 14 15)
[ 0.188749] ACPI: PCI Interrupt Link [LNKG] (IRQs *4 10 11 12 14 15)
[ 0.189018] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 12 14 15)
[ 0.189432] SCSI subsystem initialized
[ 0.189525] libata version 3.00 loaded.
[ 0.189609] usbcore: registered new interface driver usbfs
[ 0.189688] usbcore: registered new interface driver hub
[ 0.189772] usbcore: registered new device driver usb
[ 0.243337] raid6: int64x1 2557 MB/s
[ 0.300018] raid6: int64x2 3408 MB/s
[ 0.356686] raid6: int64x4 2162 MB/s
[ 0.413358] raid6: int64x8 2341 MB/s
[ 0.470002] raid6: sse2x1 4312 MB/s
[ 0.526673] raid6: sse2x2 5658 MB/s
[ 0.583337] raid6: sse2x4 5812 MB/s
[ 0.583389] raid6: using algorithm sse2x4 (5812 MB/s)
[ 0.583464] PCI: Using ACPI for IRQ routing
[ 0.583523] pci 0000:00:00.0: BAR 3: can't allocate resource
[ 0.590192] PCI-DMA: Disabling AGP.
[ 0.590327] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.590380] PCI-DMA: using GART IOMMU.
[ 0.590438] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.590915] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0
[ 0.591054] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.593355] hpet: hpet2 irq 24 for MSI
[ 0.596684] Switched to high resolution mode on CPU 0
[ 0.596914] Switched to high resolution mode on CPU 1
[ 0.610016] pnp: PnP ACPI init
[ 0.610080] ACPI: bus type pnp registered
[ 0.612578] pnp 00:0b: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.612668] pnp 00:0b: mem resource (0xc0000-0xcffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.612757] pnp 00:0b: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.612846] pnp 00:0b: mem resource (0x100000-0xceefffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.613219] pnp: PnP ACPI: found 12 devices
[ 0.613272] ACPI: ACPI bus type pnp unregistered
[ 0.613347] system 00:06: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.613401] system 00:06: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.613457] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.613510] system 00:07: ioport range 0x40b-0x40b has been reserved
[ 0.613564] system 00:07: ioport range 0x4d6-0x4d6 has been reserved
[ 0.613618] system 00:07: ioport range 0xc00-0xc01 has been reserved
[ 0.613671] system 00:07: ioport range 0xc14-0xc14 has been reserved
[ 0.613725] system 00:07: ioport range 0xc50-0xc51 has been reserved
[ 0.613778] system 00:07: ioport range 0xc52-0xc52 has been reserved
[ 0.613831] system 00:07: ioport range 0xc6c-0xc6c has been reserved
[ 0.613885] system 00:07: ioport range 0xc6f-0xc6f has been reserved
[ 0.613938] system 00:07: ioport range 0xcd0-0xcd1 has been reserved
[ 0.613991] system 00:07: ioport range 0xcd2-0xcd3 has been reserved
[ 0.614044] system 00:07: ioport range 0xcd4-0xcd5 has been reserved
[ 0.614098] system 00:07: ioport range 0xcd6-0xcd7 has been reserved
[ 0.614151] system 00:07: ioport range 0xcd8-0xcdf has been reserved
[ 0.614209] system 00:07: ioport range 0x800-0x89f has been reserved
[ 0.614262] system 00:07: ioport range 0xb00-0xb0f has been reserved
[ 0.614315] system 00:07: ioport range 0xb20-0xb3f has been reserved
[ 0.614369] system 00:07: ioport range 0x900-0x90f has been reserved
[ 0.614422] system 00:07: ioport range 0x910-0x91f has been reserved
[ 0.614476] system 00:07: ioport range 0xfe00-0xfefe has been reserved
[ 0.614529] system 00:07: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.614583] system 00:07: iomem range 0xfec10000-0xfec1001f has been reserved
[ 0.614638] system 00:09: ioport range 0x290-0x29f has been reserved
[ 0.614693] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.614749] system 00:0b: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.619596] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
[ 0.619650] pci 0000:00:02.0: IO window: 0xc000-0xcfff
[ 0.619705] pci 0000:00:02.0: MEM window: 0xfdf00000-0xfdffffff
[ 0.619759] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.619848] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03
[ 0.619902] pci 0000:00:09.0: IO window: 0xd000-0xdfff
[ 0.619956] pci 0000:00:09.0: MEM window: 0xfe000000-0xfeafffff
[ 0.620023] pci 0000:00:09.0: PREFETCH window: 0x000000fa000000-0x000000fcefffff
[ 0.620112] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:01
[ 0.620165] pci 0000:00:0a.0: IO window: 0xb000-0xbfff
[ 0.620219] pci 0000:00:0a.0: MEM window: 0xfde00000-0xfdefffff
[ 0.620273] pci 0000:00:0a.0: PREFETCH window: 0x000000cff00000-0x000000cfffffff
[ 0.620363] pci 0000:00:14.4: PCI bridge, secondary bus 0000:05
[ 0.620417] pci 0000:00:14.4: IO window: 0xe000-0xefff
[ 0.620473] pci 0000:00:14.4: MEM window: 0xfeb00000-0xfebfffff
[ 0.620528] pci 0000:00:14.4: PREFETCH window: 0x000000fcf00000-0x000000fcffffff
[ 0.620626] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.620681] pci 0000:00:02.0: setting latency timer to 64
[ 0.620687] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.620741] pci 0000:00:09.0: setting latency timer to 64
[ 0.620745] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.620798] pci 0000:00:0a.0: setting latency timer to 64
[ 0.620806] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.620808] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.620810] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
[ 0.620812] pci_bus 0000:02: resource 1 mem: [0xfdf00000-0xfdffffff]
[ 0.620814] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.620816] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 0.620817] pci_bus 0000:03: resource 1 mem: [0xfe000000-0xfeafffff]
[ 0.620819] pci_bus 0000:03: resource 2 pref mem [0xfa000000-0xfcefffff]
[ 0.620821] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
[ 0.620823] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.620825] pci_bus 0000:01: resource 2 pref mem [0xcff00000-0xcfffffff]
[ 0.620827] pci_bus 0000:05: resource 0 io: [0xe000-0xefff]
[ 0.620829] pci_bus 0000:05: resource 1 mem: [0xfeb00000-0xfebfffff]
[ 0.620830] pci_bus 0000:05: resource 2 pref mem [0xfcf00000-0xfcffffff]
[ 0.620832] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.620834] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.620861] NET: Registered protocol family 2
[ 0.656706] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.657789] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.659447] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.659987] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.660062] TCP reno registered
[ 0.670061] NET: Registered protocol family 1
[ 0.671306] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.671435] Loading Reiser4. See www.namesys.com for a description of Reiser4.
[ 0.671590] msgmni has been set to 15964
[ 0.671801] alg: No test for stdrng (krng)
[ 0.671856] async_tx: api initialized (sync-only)
[ 0.671941] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.672029] io scheduler noop registered
[ 0.672092] io scheduler cfq registered (default)
[ 0.800021] pci 0000:02:00.0: Boot video device
[ 0.800134] pcieport-driver 0000:00:02.0: irq 25 for MSI/MSI-X
[ 0.800143] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 0.800254] pcieport-driver 0000:00:09.0: irq 26 for MSI/MSI-X
[ 0.800262] pcieport-driver 0000:00:09.0: setting latency timer to 64
[ 0.800371] pcieport-driver 0000:00:0a.0: irq 27 for MSI/MSI-X
[ 0.800379] pcieport-driver 0000:00:0a.0: setting latency timer to 64
[ 0.800631] input: Power Button as /class/input/input0
[ 0.800684] ACPI: Power Button [PWRF]
[ 0.800793] input: Power Button as /class/input/input1
[ 0.800848] ACPI: Power Button [PWRB]
[ 0.801020] processor ACPI_CPU:00: registered as cooling_device0
[ 0.801074] ACPI: Processor [P001] (supports 8 throttling states)
[ 0.801200] processor ACPI_CPU:01: registered as cooling_device1
[ 0.805016] Linux agpgart interface v0.103
[ 0.805174] Driver 'sd' needs updating - please use bus_type methods
[ 0.805284] ahci 0000:00:11.0: version 3.0
[ 0.805298] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.805468] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.805557] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 0.806030] scsi0 : ahci
[ 0.806175] scsi1 : ahci
[ 0.806272] scsi2 : ahci
[ 0.806367] scsi3 : ahci
[ 0.806464] scsi4 : ahci
[ 0.806564] scsi5 : ahci
[ 0.806736] ata1: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddff900 irq 22
[ 0.806825] ata2: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddff980 irq 22
[ 0.806914] ata3: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffa00 irq 22
[ 0.807002] ata4: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffa80 irq 22
[ 0.807091] ata5: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffb00 irq 22
[ 0.807179] ata6: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffb80 irq 22
[ 0.807478] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.807535] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.808136] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.808243] mice: PS/2 mouse device common for all mice
[ 0.808393] rtc_cmos 00:02: RTC can wake from S4
[ 0.808481] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.808558] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.808630] md: raid1 personality registered for level 1
[ 0.808683] md: raid6 personality registered for level 6
[ 0.808735] md: raid5 personality registered for level 5
[ 0.808788] md: raid4 personality registered for level 4
[ 0.808909] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 0.809023] cpuidle: using governor ladder
[ 0.809169] usbcore: registered new interface driver hiddev
[ 0.809241] usbcore: registered new interface driver usbhid
[ 0.809295] usbhid: v2.6:USB HID core driver
[ 0.809375] TCP cubic registered
[ 0.809428] NET: Registered protocol family 17
[ 0.809493] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00)
[ 0.809622] powernow-k8: 0 : fid 0x16 (3000 MHz), vid 0x6
[ 0.809676] powernow-k8: 1 : fid 0x14 (2800 MHz), vid 0x8
[ 0.809729] powernow-k8: 2 : fid 0x12 (2600 MHz), vid 0xa
[ 0.809781] powernow-k8: 3 : fid 0x10 (2400 MHz), vid 0xc
[ 0.809834] powernow-k8: 4 : fid 0xe (2200 MHz), vid 0xe
[ 0.809887] powernow-k8: 5 : fid 0xc (2000 MHz), vid 0x10
[ 0.809939] powernow-k8: 6 : fid 0xa (1800 MHz), vid 0x10
[ 0.809992] powernow-k8: 7 : fid 0x2 (1000 MHz), vid 0x12
[ 0.810198] PM: Resume from disk failed.
[ 0.810303] Magic number: 13:102:82
[ 0.833832] input: AT Translated Set 2 keyboard as /class/input/input2
[ 1.126701] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.126781] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.126854] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.126931] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.127004] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.127078] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.133063] ata1.00: ATA-7: SAMSUNG HD502IJ, 1AA01109, max UDMA7
[ 1.133122] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.133185] ata4.00: ATA-7: SAMSUNG HD753LJ, 1AA01113, max UDMA7
[ 1.133246] ata4.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.133286] ata2.00: ATA-7: SAMSUNG HD502IJ, 1AA01110, max UDMA7
[ 1.133287] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.139554] ata1.00: configured for UDMA/133
[ 1.139682] ata2.00: configured for UDMA/133
[ 1.139811] ata4.00: configured for UDMA/133
[ 1.150914] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5
[ 1.151138] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 1.152079] sd 0:0:0:0: [sda] Write Protect is off
[ 1.152132] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.152143] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.152273] sda:<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.152430] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5
[ 1.152616] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 1.152709] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.152762] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.152771] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.152894] sdb:<5>sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.153036] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5
[ 1.153217] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1.153291] sd 3:0:0:0: [sdc] 1465149168 512-byte hardware sectors: (750 GB/698 GiB)
[ 1.153399] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.153452] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.153462] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.153586] sdc: sdc1 sdc2 sdc3 sdc4 < sda1 sda2 sda3 sda4 < sdb1 sdb2 sdb3 sdb4 < sda5 sdc5 sdc6 sdb5 sda6 >
[ 1.178636] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.187480] sdc7 >
[ 1.187819] sdb6 >
[ 1.188149] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.188317] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.188377] md: Waiting for all devices to be available before autodetect
[ 1.188431] md: If you don't use raid, use raid=noautodetect
[ 1.188560] md: Autodetecting RAID arrays.
[ 1.303098] md: Scanned 12 and added 12 devices.
[ 1.303151] md: autorun ...
[ 1.303203] md: considering sdb6 ...
[ 1.303257] md: adding sdb6 ...
[ 1.303310] md: sdb5 has different UUID to sdb6
[ 1.303372] md: sdb3 has different UUID to sdb6
[ 1.303425] md: sdb1 has different UUID to sdb6
[ 1.303479] md: adding sdc6 ...
[ 1.303532] md: sdc5 has different UUID to sdb6
[ 1.303585] md: sdc3 has different UUID to sdb6
[ 1.303639] md: sdc1 has different UUID to sdb6
[ 1.303693] md: adding sda6 ...
[ 1.303745] md: sda5 has different UUID to sdb6
[ 1.303799] md: sda3 has different UUID to sdb6
[ 1.303852] md: sda1 has different UUID to sdb6
[ 1.303983] md: created md3
[ 1.304035] md: bind<sda6>
[ 1.304092] md: bind<sdc6>
[ 1.304148] md: bind<sdb6>
[ 1.304213] md: running: <sdb6><sdc6><sda6>
[ 1.304363] raid5: device sdb6 operational as raid disk 1
[ 1.304415] raid5: device sdc6 operational as raid disk 2
[ 1.304468] raid5: device sda6 operational as raid disk 0
[ 1.304715] raid5: allocated 3220kB for md3
[ 1.304778] raid5: raid level 5 set md3 active with 3 out of 3 devices, algorithm 2
[ 1.304866] RAID5 conf printout:
[ 1.304918] --- rd:3 wd:3
[ 1.304969] disk 0, o:1, dev:sda6
[ 1.305021] disk 1, o:1, dev:sdb6
[ 1.305073] disk 2, o:1, dev:sdc6
[ 1.305159] md: considering sdb5 ...
[ 1.305215] md: adding sdb5 ...
[ 1.305268] md: sdb3 has different UUID to sdb5
[ 1.305321] md: sdb1 has different UUID to sdb5
[ 1.305375] md: adding sdc5 ...
[ 1.305429] md: sdc3 has different UUID to sdb5
[ 1.305482] md: sdc1 has different UUID to sdb5
[ 1.305536] md: adding sda5 ...
[ 1.305589] md: sda3 has different UUID to sdb5
[ 1.305643] md: sda1 has different UUID to sdb5
[ 1.305758] md: created md2
[ 1.305810] md: bind<sda5>
[ 1.305866] md: bind<sdc5>
[ 1.305923] md: bind<sdb5>
[ 1.305980] md: running: <sdb5><sdc5><sda5>
[ 1.306123] raid5: device sdb5 operational as raid disk 1
[ 1.306175] raid5: device sdc5 operational as raid disk 2
[ 1.306228] raid5: device sda5 operational as raid disk 0
[ 1.306488] raid5: allocated 3220kB for md2
[ 1.306552] raid5: raid level 5 set md2 active with 3 out of 3 devices, algorithm 2
[ 1.306639] RAID5 conf printout:
[ 1.306698] --- rd:3 wd:3
[ 1.306750] disk 0, o:1, dev:sda5
[ 1.306802] disk 1, o:1, dev:sdb5
[ 1.306854] disk 2, o:1, dev:sdc5
[ 1.306937] md: considering sdb3 ...
[ 1.306993] md: adding sdb3 ...
[ 1.307046] md: sdb1 has different UUID to sdb3
[ 1.307101] md: adding sdc3 ...
[ 1.307154] md: sdc1 has different UUID to sdb3
[ 1.307208] md: adding sda3 ...
[ 1.307261] md: sda1 has different UUID to sdb3
[ 1.307369] md: created md1
[ 1.307422] md: bind<sda3>
[ 1.307478] md: bind<sdc3>
[ 1.307544] md: bind<sdb3>
[ 1.307600] md: running: <sdb3><sdc3><sda3>
[ 1.307742] raid5: device sdb3 operational as raid disk 1
[ 1.307795] raid5: device sdc3 operational as raid disk 2
[ 1.307848] raid5: device sda3 operational as raid disk 0
[ 1.308111] raid5: allocated 3220kB for md1
[ 1.308174] raid5: raid level 5 set md1 active with 3 out of 3 devices, algorithm 2
[ 1.308261] RAID5 conf printout:
[ 1.308313] --- rd:3 wd:3
[ 1.308365] disk 0, o:1, dev:sda3
[ 1.308417] disk 1, o:1, dev:sdb3
[ 1.308469] disk 2, o:1, dev:sdc3
[ 1.308552] md: considering sdb1 ...
[ 1.308607] md: adding sdb1 ...
[ 1.308661] md: adding sdc1 ...
[ 1.308714] md: adding sda1 ...
[ 1.308767] md: created md0
[ 1.308819] md: bind<sda1>
[ 1.308877] md: bind<sdc1>
[ 1.308934] md: bind<sdb1>
[ 1.308990] md: running: <sdb1><sdc1><sda1>
[ 1.309170] raid1: raid set md0 active with 3 out of 3 mirrors
[ 1.309252] md: ... autorun DONE.
[ 1.309330] md: Loading md3: /dev/sda3
[ 1.309391] md3: unknown partition table
[ 1.309585] md: couldn't update array info. -22
[ 1.309641] md: could not bd_claim sda3.
[ 1.309694] md: md_import_device returned -16
[ 1.309748] md: could not bd_claim sdb3.
[ 1.309800] md: md_import_device returned -16
[ 1.309854] md: could not bd_claim sdc3.
[ 1.309905] md: md_import_device returned -16
[ 1.309958] md: starting md3 failed
[ 1.310056] md1: unknown partition table
[ 1.356793] reiser4: md1: found disk format 4.0.0.
[ 5.390569] VFS: Mounted root (reiser4 filesystem) readonly on device 9:1.
[ 5.390642] Freeing unused kernel memory: 348k freed
[ 9.065384] udev: starting version 141
[ 9.065405] udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly
[ 9.382904] md0: unknown partition table
[ 9.388785] md2: unknown partition table
[ 10.684104] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 10.684120] r8169 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.684133] r8169 0000:01:00.0: setting latency timer to 64
[ 10.684506] r8169 0000:01:00.0: irq 28 for MSI/MSI-X
[ 10.684588] eth0: RTL8168c/8111c at 0xffffc20012e10000, 00:19:66:86:ce:12, XID 3c4000c0 IRQ 28
[ 10.715247] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 10.715273] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 10.715299] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 10.715833] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 10.715864] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[ 10.715882] ehci_hcd 0000:00:12.2: debug port 1
[ 10.715900] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfddff000
[ 10.724178] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 10.724212] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.724214] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.724216] usb usb1: Product: EHCI Host Controller
[ 10.724217] usb usb1: Manufacturer: Linux 2.6.30r4 ehci_hcd
[ 10.724219] usb usb1: SerialNumber: 0000:00:12.2
[ 10.724273] usb usb1: configuration #1 chosen from 1 choice
[ 10.724298] hub 1-0:1.0: USB hub found
[ 10.724307] hub 1-0:1.0: 6 ports detected
[ 10.724411] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 10.724431] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 10.724467] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 10.724488] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[ 10.724507] ehci_hcd 0000:00:13.2: debug port 1
[ 10.724522] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfddf6800
[ 10.734185] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 10.734209] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.734211] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.734213] usb usb2: Product: EHCI Host Controller
[ 10.734215] usb usb2: Manufacturer: Linux 2.6.30r4 ehci_hcd
[ 10.734216] usb usb2: SerialNumber: 0000:00:13.2
[ 10.734275] usb usb2: configuration #1 chosen from 1 choice
[ 10.734300] hub 2-0:1.0: USB hub found
[ 10.734308] hub 2-0:1.0: 6 ports detected
[ 10.778632] Linux video capture interface: v2.00
[ 10.789097] bttv: driver version 0.9.18 loaded
[ 10.789100] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 10.789129] bttv: Bt8xx card found (0).
[ 10.789141] bttv 0000:05:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 10.789152] bttv0: Bt848 (rev 18) at 0000:05:06.0, irq: 21, latency: 32, mmio: 0xfcfff000
[ 10.789776] bttv0: using: Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar [card=25,insmod option]
[ 10.789779] IRQ 21/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs
[ 10.789819] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
[ 11.030844] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 11.155884] usb 1-3: New USB device found, idVendor=05e3, idProduct=0608
[ 11.155885] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 11.155887] usb 1-3: Product: USB2.0 Hub
[ 11.155935] usb 1-3: configuration #1 chosen from 1 choice
[ 11.156149] hub 1-3:1.0: USB hub found
[ 11.156502] hub 1-3:1.0: 4 ports detected
[ 11.424864] usb 1-3.1: new low speed USB device using ehci_hcd and address 3
[ 11.514100] usb 1-3.1: New USB device found, idVendor=046d, idProduct=c518
[ 11.514102] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 11.514104] usb 1-3.1: Product: USB Receiver
[ 11.514105] usb 1-3.1: Manufacturer: Logitech
[ 11.514158] usb 1-3.1: configuration #1 chosen from 1 choice
[ 11.524577] input: Logitech USB Receiver as /class/input/input3
[ 11.524629] generic-usb 0003:046D:C518.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.2-3.1/input0
[ 11.530287] input: Logitech USB Receiver as /class/input/input4
[ 11.530354] generic-usb 0003:046D:C518.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-3.1/input1
[ 11.790024] bttv0: tea5757: read timeout
[ 11.790027] bttv0: tuner type=5
[ 11.808501] All bytes are equal. It is not a TEA5767
[ 11.808540] tuner 0-0060: chip found @ 0xc0 (bt848 #0 [sw])
[ 11.811730] tuner-simple 0-0060: creating new instance
[ 11.811733] tuner-simple 0-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
[ 11.825006] bttv0: audio absent, no audio device found!
[ 11.825049] bttv0: registered device video0
[ 11.825069] bttv0: registered device vbi0
[ 11.844462] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 11.844465] e100: Copyright(c) 1999-2006 Intel Corporation
[ 12.193039] reiser4: md2: found disk format 4.0.0.
[ 13.997414] reiser4: md3: found disk format 4.0.0.
[ 55.180844] reiser4: sdc7: found disk format 4.0.0.
[ 67.595571] Adding 7815612k swap on /dev/sda2. Priority:1 extents:1 across:7815612k
[ 67.606657] Adding 7815612k swap on /dev/sdb2. Priority:1 extents:1 across:7815612k
[ 67.617095] Adding 7815612k swap on /dev/sdc2. Priority:1 extents:1 across:7815612k
[ 68.400516] w83627ehf: Found W83627EHG chip at 0x290
[ 68.410870] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 68.814675] r8169: eth0: link up
[ 68.814682] r8169: eth0: link up
[ 69.000840] Clocksource tsc unstable (delta = -134183872 ns)
[ 71.440722] EMU10K1_Audigy 0000:05:08.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 71.448506] Audigy2 value: Special config.
[ 72.793961] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 72.793971] Disabling lock debugging due to kernel taint
[ 72.849012] [fglrx] Maximum main memory to use for locked dma buffers: 7749 MBytes.
[ 72.849222] [fglrx] vendor: 1002 device: 9501 count: 1
[ 72.849704] [fglrx] ioport: bar 4, base 0xc000, size: 0x100
[ 72.849728] pci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 72.849738] pci 0000:02:00.0: setting latency timer to 64
[ 72.850071] [fglrx] Kernel PAT support is enabled
[ 72.850115] [fglrx] module loaded - fglrx 8.62.4 [May 20 2009] with 1 minors
[ 74.433201] fglrx_pci 0000:02:00.0: irq 29 for MSI/MSI-X
[ 74.433535] [fglrx] Firegl kernel thread PID: 3915
[ 74.448363] [fglrx] Gart USWC size:1279 M.
[ 74.448366] [fglrx] Gart cacheable size:508 M.
[ 74.448371] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 74.448373] [fglrx] Reserved FB block: Unshared offset:fbff000, size:401000
[ 74.448375] [fglrx] Reserved FB block: Unshared offset:1fffc000, size:4000
[ 74.457643] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fae1f0000,handle:0xd0000000
[ 74.515927] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fad83f000,handle:0xd10a0000
[ 74.532065] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e96000,handle:0xd11a0000
[ 74.532114] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb11a5000,handle:0xd11a4000
[ 74.751708] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e95000,handle:0xd11a8000
[ 74.751730] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e94000,handle:0xd11a9000
[ 74.984297] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fac307000,handle:0xfdff0000
[ 74.984492] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fac2c7000,handle:0xd11aa000
[ 74.988311] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fac2c7000,handle:0xd11aa000
[ 75.004646] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fac23c000,handle:0xfdff0000
[ 75.550286] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fac23c000,handle:0xfdff0000
[ 75.550325] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fac307000,handle:0xfdff0000
[ 75.550447] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fad83f000,handle:0xd10a0000
[ 75.551925] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fae1f0000,handle:0xd0000000
[ 75.552052] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb11a5000,handle:0xd11a4000
[ 75.552114] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e94000,handle:0xd11a9000
[ 75.552125] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e95000,handle:0xd11a8000
[ 75.552137] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e96000,handle:0xd11a0000
[ 75.553632] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fac23c000,handle:0xfdff0000
[ 75.553640] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fac307000,handle:0xfdff0000
[ 75.553647] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fad83f000,handle:0xd10a0000
[ 75.553654] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fae1f0000,handle:0xd0000000
[ 75.553666] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb11a5000,handle:0xd11a4000
[ 75.553676] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e94000,handle:0xd11a9000
[ 75.553682] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e95000,handle:0xd11a8000
[ 75.553688] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e96000,handle:0xd11a0000
[ 75.858023] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fac23c000,handle:0xfdff0000
[ 75.858096] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fac307000,handle:0xfdff0000
[ 75.858303] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fad83f000,handle:0xd10a0000
[ 75.860375] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fae1f0000,handle:0xd0000000
[ 75.860589] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb11a5000,handle:0xd11a4000
[ 75.860703] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e94000,handle:0xd11a9000
[ 75.860726] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e95000,handle:0xd11a8000
[ 75.860745] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e96000,handle:0xd11a0000
[ 75.863454] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fac23c000,handle:0xfdff0000
[ 75.863469] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fac307000,handle:0xfdff0000
[ 75.863481] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fad83f000,handle:0xd10a0000
[ 75.863494] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fae1f0000,handle:0xd0000000
[ 75.863519] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb11a5000,handle:0xd11a4000
[ 75.863537] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e94000,handle:0xd11a9000
[ 75.863547] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e95000,handle:0xd11a8000
[ 75.863558] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e96000,handle:0xd11a0000
[ 75.968577] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fac23c000,handle:0xfdff0000
[ 75.968604] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fac307000,handle:0xfdff0000
[ 75.968680] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fad83f000,handle:0xd10a0000
[ 75.969422] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fae1f0000,handle:0xd0000000
[ 75.969507] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb11a5000,handle:0xd11a4000
[ 75.969550] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e94000,handle:0xd11a9000
[ 75.969556] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e95000,handle:0xd11a8000
[ 75.969563] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e96000,handle:0xd11a0000
[ 75.970505] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fac23c000,handle:0xfdff0000
[ 75.970509] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fac307000,handle:0xfdff0000
[ 75.970513] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fad83f000,handle:0xd10a0000
[ 75.970517] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fae1f0000,handle:0xd0000000
[ 75.970525] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb11a5000,handle:0xd11a4000
[ 75.970531] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e94000,handle:0xd11a9000
[ 75.970535] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e95000,handle:0xd11a8000
[ 75.970538] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7fb1e96000,handle:0xd11a0000
[ 99.004408] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7faafc7000,handle:0xd11ab000
[ 99.005315] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7faa8da000,handle:0xd13ab000
[ 99.009092] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7faa8da000,handle:0xd13ab000
[ 99.344445] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7faa8da000,handle:0xd1a97000
[ 99.346962] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7faa8da000,handle:0xd1a97000
[ 99.780075] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f7faafc7000,handle:0xd11ab000
[ 310.130543] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f3461ce2000,handle:0xfdff0000
[ 310.132172] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f346198a000,handle:0xd11ac000
[ 310.135805] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f346198a000,handle:0xd11ac000
[ 310.301717] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f345f68a000,handle:0xd125c000
[ 310.529123] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f345f208000,handle:0xd145c000
[ 330.643213] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f345c7d9000,handle:0xd165c000
[ 330.644786] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f345c7d9000,handle:0xd165c000
[ 331.072608] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f345d159000,handle:0xd1a5c000
[ 334.394209] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f345b744000,handle:0xd1c64000
[ 334.394933] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f345b744000,handle:0xd1c64000
[ 344.444794] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f345bb83000,handle:0xd1e6c000
[ 344.446393] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f345b744000,handle:0xd21a4000
[ 549.610432] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f345f68a000,handle:0xd125c000
[ 549.610497] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f345d159000,handle:0xd1a5c000
[ 549.610561] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f345bb83000,handle:0xd1e6c000
[ 549.610625] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f345b744000,handle:0xd21a4000
[ 549.610688] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f345f208000,handle:0xd145c000
[ 549.671659] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f3461ce2000,handle:0xfdff0000
[ 564.981893] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f9010a04000,handle:0xfdff0000
[ 564.983515] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f9010163000,handle:0xd11ac000
[ 564.987387] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f9010163000,handle:0xd11ac000
[ 565.401879] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f900ee9b000,handle:0xd125c000
[ 588.766362] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f9000327000,handle:0xd14b9000
[ 591.568345] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f8ffdb0b000,handle:0xd16b9000
[ 592.314446] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f8ffd39e000,handle:0xd18b9000
[ 592.813976] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f8ffcc23000,handle:0xd1ab9000
[ 612.575160] reiser4[zsh(5703)]: disable_write_barrier (fs/reiser4/wander.c:235)[zam-1055]:
[ 612.575161] NOTICE: md1 does not support write barriers, using synchronous write instead.
[ 671.429039] reiser4[qmgr(3749)]: disable_write_barrier (fs/reiser4/wander.c:235)[zam-1055]:
[ 671.429040] NOTICE: md2 does not support write barriers, using synchronous write instead.
[ 684.136908] reiser4[ktxnmgrd:md3:ru(2825)]: disable_write_barrier (fs/reiser4/wander.c:235)[zam-1055]:
[ 684.136909] NOTICE: md3 does not support write barriers, using synchronous write instead.
[ 827.910880] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f900dddf000,handle:0xd1cb9000
[ 855.901749] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f8ffc0cb000,handle:0xd1eb9000
[ 855.902475] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f8ffc0cb000,handle:0xd1eb9000
[ 855.903785] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f900d644000,handle:0xd21a4000
[ 855.904505] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f900d644000,handle:0xd21a4000
[ 855.905475] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f8ffbae1000,handle:0xd23a4000
[ 855.906966] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f8ffbae1000,handle:0xd23a4000
[ 855.908185] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f900d644000,handle:0xd27a4000
[ 855.908927] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f900d644000,handle:0xd27a4000
[ 966.615713] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f8ffb35d000,handle:0xd29a4000
[ 966.616497] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f8ffb35d000,handle:0xd29a4000
[ 1056.227655] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f8ffc8a1000,handle:0xd2ba4000
[ 1056.228390] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f8ffc8a1000,handle:0xd2ba4000
[ 1076.675435] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f900ee9b000,handle:0xd125c000
[ 1076.675503] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f8ffcc23000,handle:0xd1ab9000
[ 1076.675565] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f9000327000,handle:0xd14b9000
[ 1076.675629] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f8ffdb0b000,handle:0xd16b9000
[ 1076.675692] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f900dddf000,handle:0xd1cb9000
[ 1076.675781] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f8ffd39e000,handle:0xd18b9000
[ 1076.734879] [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_close] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7f9010a04000,handle:0xfdff0000
[-- Attachment #3: dmesg_8gb_x4_955 --]
[-- Type: text/plain, Size: 45620 bytes --]
[ 0.000000] Linux version 2.6.30.5r4 (root@energy) (gcc version 4.4.1 (Gentoo 4.4.1 p1.0) ) #1 SMP Tue Aug 18 06:28:18 CEST 2009
[ 0.000000] Command line: root=/dev/md1 md=3,/dev/sda3,/dev/sdb3,/dev/sdc3 nmi_watchdog=0 mtrr_spare_reg_nr=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7eb0000 (usable)
[ 0.000000] BIOS-e820: 00000000c7eb0000 - 00000000c7ec0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000c7ec0000 - 00000000c7ef0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000c7ef0000 - 00000000c7f00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000238000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x238000 max_arch_pfn = 0x100000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF8000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000238000000 aka 9088M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000c8000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xc7eb0 max_arch_pfn = 0x100000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000c7eb0000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00c7e00000 page 2M
[ 0.000000] 00c7e00000 - 00c7eb0000 page 4k
[ 0.000000] kernel direct mapping tables up to c7eb0000 @ 10000-13000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000238000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] 0100000000 - 0200000000 page 1G
[ 0.000000] 0200000000 - 0238000000 page 2M
[ 0.000000] kernel direct mapping tables up to 238000000 @ 12000-14000
[ 0.000000] ACPI: RSDP 00000000000fa7c0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000c7eb0000 00040 (v01 050609 RSDT2000 20090506 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000c7eb0200 00084 (v02 A M I OEMFACP 12000601 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000c7eb0440 08512 (v01 AS140 AS140121 00000121 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000c7ec0000 00040
[ 0.000000] ACPI: APIC 00000000c7eb0390 0006C (v01 050609 APIC2000 20090506 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000c7eb0400 0003C (v01 050609 OEMMCFG 20090506 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000c7ec0040 00071 (v01 050609 OEMB2000 20090506 MSFT 00000097)
[ 0.000000] ACPI: AAFT 00000000c7eb8960 00027 (v01 050609 OEMAAFT 20090506 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000c7eb8990 00038 (v01 050609 OEMHPET 20090506 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000c7eb89d0 0088C (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0238000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001575998] TEXT DATA BSS ==> [0001000000 - 0001575998]
[ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #4 [0001576000 - 0001576133] BRK ==> [0001576000 - 0001576133]
[ 0.000000] #5 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #6 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000]
[ 0.000000] [ffffe20000000000-ffffe20007dfffff] PMD -> [ffff880028200000-ffff88002fffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00238000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000c7eb0
[ 0.000000] 0: 0x00100000 -> 0x00238000
[ 0.000000] On node 0 totalpages: 2096703
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 102 pages reserved
[ 0.000000] DMA zone: 3825 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 800488 pages, LIFO batch:31
[ 0.000000] Normal zone: 17472 pages used for memmap
[ 0.000000] Normal zone: 1260480 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000c7eb0000 - 00000000c7ec0000
[ 0.000000] PM: Registered nosave memory: 00000000c7ec0000 - 00000000c7ef0000
[ 0.000000] PM: Registered nosave memory: 00000000c7ef0000 - 00000000c7f00000
[ 0.000000] PM: Registered nosave memory: 00000000c7f00000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c8000000 (gap: c7f00000:38000000)
[ 0.000000] NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 24 pages at ffff880028034000, static data 67808 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064793
[ 0.000000] Kernel command line: root=/dev/md1 md=3,/dev/sda3,/dev/sdb3,/dev/sdc3 nmi_watchdog=0 mtrr_spare_reg_nr=1
[ 0.000000] md: Will configure md3 (super-block) from /dev/sda3,/dev/sdb3,/dev/sdc3, below.
[ 0.000000] Initializing CPU#0
[ 0.000000] NR_IRQS:384
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3199.396 MHz processor.
[ 0.003333] Console: colour VGA+ 80x25
[ 0.003333] console [tty0] enabled
[ 0.003333] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.003333] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003333] Checking aperture...
[ 0.003333] No AGP bridge found
[ 0.003333] Node 0: aperture @ 20000000 size 32 MB
[ 0.003333] Aperture pointing to e820 RAM. Ignoring.
[ 0.003333] Your BIOS doesn't leave a aperture memory hole
[ 0.003333] Please enable the IOMMU option in the BIOS setup
[ 0.003333] This costs you 64 MB of RAM
[ 0.003333] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.003333] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.003333] Memory: 8172700k/9306112k available (3231k kernel code, 919300k absent, 213188k reserved, 1310k data, 348k init)
[ 0.003333] hpet clockevent registered
[ 0.003333] HPET: 4 timers in total, 1 timers will be used for per-cpu timer
[ 0.003339] Calibrating delay loop (skipped), value calculated using timer frequency.. 6401.40 BogoMIPS (lpj=10664640)
[ 0.003445] Mount-cache hash table entries: 256
[ 0.003565] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.003600] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003635] tseg: 0000000000
[ 0.003640] CPU: Physical Processor ID: 0
[ 0.003673] CPU: Processor Core ID: 0
[ 0.003712] using C1E aware idle routine
[ 0.003755] ACPI: Core revision 20090320
[ 0.016702] Setting APIC routing to flat
[ 0.017042] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.050834] CPU0: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.053332] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.003333] Initializing CPU#1
[ 0.003333] Calibrating delay using timer specific routine.. 6402.85 BogoMIPS (lpj=10666975)
[ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.003333] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 1
[ 0.003333] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.144186] CPU1: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.144501] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.146716] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.003333] Initializing CPU#2
[ 0.003333] Calibrating delay using timer specific routine.. 6402.85 BogoMIPS (lpj=10666969)
[ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.003333] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 2
[ 0.003333] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
[ 0.240889] CPU2: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.241204] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.243382] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.003333] Initializing CPU#3
[ 0.003333] Calibrating delay using timer specific routine.. 6402.86 BogoMIPS (lpj=10666976)
[ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.003333] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 3
[ 0.003333] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
[ 0.337491] CPU3: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.337806] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.340014] Brought up 4 CPUs
[ 0.340048] Total of 4 processors activated (25609.97 BogoMIPS).
[ 0.340318] net_namespace: 1400 bytes
[ 0.340422] xor: automatically using best checksumming function: generic_sse
[ 0.356667] generic_sse: 12784.800 MB/sec
[ 0.356701] xor: using function: generic_sse (12784.800 MB/sec)
[ 0.356755] Time: 1:11:08 Date: 08/27/09
[ 0.356837] NET: Registered protocol family 16
[ 0.357045] node 0 link 0: io port [1000, ffffff]
[ 0.357048] TOM: 00000000c8000000 aka 3200M
[ 0.357082] Fam 10h mmconf [e0000000, efffffff]
[ 0.357084] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.357086] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.357088] node 0 link 0: mmio [a0000, bffff]
[ 0.357089] node 0 link 0: mmio [c8000000, dfffffff]
[ 0.357091] TOM2: 0000000238000000 aka 9088M
[ 0.357125] bus: [00,07] on node 0 link 0
[ 0.357126] bus: 00 index 0 io port: [0, ffff]
[ 0.357127] bus: 00 index 1 mmio: [f0000000, ffffffff]
[ 0.357128] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.357129] bus: 00 index 3 mmio: [c8000000, dfffffff]
[ 0.357131] bus: 00 index 4 mmio: [238000000, fcffffffff]
[ 0.357137] ACPI: bus type pci registered
[ 0.357241] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.357277] PCI: Not using MMCONFIG.
[ 0.357310] PCI: Using configuration type 1 for base access
[ 0.357345] PCI: Using configuration type 1 for extended access
[ 0.358938] bio: create slab <bio-0> at 0
[ 0.359389] ACPI: EC: Look up EC in DSDT
[ 0.367199] ACPI: Interpreter enabled
[ 0.367234] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.367351] ACPI: Using IOAPIC for interrupt routing
[ 0.367429] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.370599] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.375781] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.381489] ACPI: No dock devices found.
[ 0.381718] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.381799] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
[ 0.381845] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.381880] pci 0000:00:02.0: PME# disabled
[ 0.381948] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.381983] pci 0000:00:09.0: PME# disabled
[ 0.382532] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.382567] pci 0000:00:0a.0: PME# disabled
[ 0.382645] pci 0000:00:11.0: reg 10 io port: [0x9000-0x9007]
[ 0.382651] pci 0000:00:11.0: reg 14 io port: [0x8000-0x8003]
[ 0.382657] pci 0000:00:11.0: reg 18 io port: [0x7000-0x7007]
[ 0.382663] pci 0000:00:11.0: reg 1c io port: [0x6000-0x6003]
[ 0.382668] pci 0000:00:11.0: reg 20 io port: [0x5000-0x500f]
[ 0.382674] pci 0000:00:11.0: reg 24 32bit mmio: [0xfddff800-0xfddffbff]
[ 0.382724] pci 0000:00:12.0: reg 10 32bit mmio: [0xfddfe000-0xfddfefff]
[ 0.382775] pci 0000:00:12.1: reg 10 32bit mmio: [0xfddfd000-0xfddfdfff]
[ 0.382843] pci 0000:00:12.2: reg 10 32bit mmio: [0xfddff000-0xfddff0ff]
[ 0.382892] pci 0000:00:12.2: supports D1 D2
[ 0.382894] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.382930] pci 0000:00:12.2: PME# disabled
[ 0.382992] pci 0000:00:13.0: reg 10 32bit mmio: [0xfddfc000-0xfddfcfff]
[ 0.383043] pci 0000:00:13.1: reg 10 32bit mmio: [0xfddf7000-0xfddf7fff]
[ 0.383111] pci 0000:00:13.2: reg 10 32bit mmio: [0xfddf6800-0xfddf68ff]
[ 0.383161] pci 0000:00:13.2: supports D1 D2
[ 0.383162] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.383199] pci 0000:00:13.2: PME# disabled
[ 0.383342] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[ 0.383348] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[ 0.383353] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.383359] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.383365] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
[ 0.383490] pci 0000:00:14.5: reg 10 32bit mmio: [0xfddf5000-0xfddf5fff]
[ 0.383624] pci 0000:02:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.383631] pci 0000:02:00.0: reg 18 64bit mmio: [0xfdff0000-0xfdffffff]
[ 0.383636] pci 0000:02:00.0: reg 20 io port: [0xb000-0xb0ff]
[ 0.383643] pci 0000:02:00.0: reg 30 32bit mmio: [0xfdfc0000-0xfdfdffff]
[ 0.383659] pci 0000:02:00.0: supports D1 D2
[ 0.383686] pci 0000:02:00.1: reg 10 64bit mmio: [0xfdfec000-0xfdfeffff]
[ 0.383717] pci 0000:02:00.1: supports D1 D2
[ 0.383767] pci 0000:00:02.0: bridge io port: [0xb000-0xbfff]
[ 0.383769] pci 0000:00:02.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
[ 0.383772] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.383812] pci 0000:03:00.0: reg 10 io port: [0xd800-0xd8ff]
[ 0.383828] pci 0000:03:00.0: reg 18 64bit mmio: [0xfebff000-0xfebfffff]
[ 0.383844] pci 0000:03:00.0: reg 30 32bit mmio: [0xfebc0000-0xfebdffff]
[ 0.383878] pci 0000:03:00.0: supports D1 D2
[ 0.383879] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.383916] pci 0000:03:00.0: PME# disabled
[ 0.383999] pci 0000:00:09.0: bridge io port: [0xc000-0xdfff]
[ 0.384001] pci 0000:00:09.0: bridge 32bit mmio: [0xfe000000-0xfebfffff]
[ 0.384003] pci 0000:00:09.0: bridge 64bit mmio pref: [0xfa000000-0xfcefffff]
[ 0.384035] pci 0000:01:00.0: reg 10 io port: [0xa800-0xa8ff]
[ 0.384049] pci 0000:01:00.0: reg 18 64bit mmio: [0xcffff000-0xcfffffff]
[ 0.384059] pci 0000:01:00.0: reg 20 64bit mmio: [0xcffe0000-0xcffeffff]
[ 0.384065] pci 0000:01:00.0: reg 30 32bit mmio: [0xfdef0000-0xfdefffff]
[ 0.384094] pci 0000:01:00.0: supports D1 D2
[ 0.384095] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.384132] pci 0000:01:00.0: PME# disabled
[ 0.384219] pci 0000:00:0a.0: bridge io port: [0xa000-0xafff]
[ 0.384221] pci 0000:00:0a.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.384223] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xcff00000-0xcfffffff]
[ 0.384258] pci 0000:05:06.0: reg 10 32bit mmio: [0xfcfff000-0xfcffffff]
[ 0.384338] pci 0000:05:08.0: reg 10 io port: [0xe800-0xe83f]
[ 0.384395] pci 0000:05:08.0: supports D1 D2
[ 0.384437] pci 0000:00:14.4: transparent bridge
[ 0.384474] pci 0000:00:14.4: bridge io port: [0xe000-0xefff]
[ 0.384480] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfcf00000-0xfcffffff]
[ 0.384492] pci_bus 0000:00: on NUMA node 0
[ 0.384496] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.384625] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.384670] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.384715] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.384777] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 0.387594] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
[ 0.387840] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
[ 0.388083] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[ 0.388326] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[ 0.388568] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.388857] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 12 14 15)
[ 0.389100] ACPI: PCI Interrupt Link [LNKG] (IRQs *4 10 11 12 14 15)
[ 0.389329] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 12 14 15)
[ 0.389715] SCSI subsystem initialized
[ 0.389800] libata version 3.00 loaded.
[ 0.389869] usbcore: registered new interface driver usbfs
[ 0.389925] usbcore: registered new interface driver hub
[ 0.389988] usbcore: registered new device driver usb
[ 0.446681] raid6: int64x1 2808 MB/s
[ 0.503341] raid6: int64x2 3611 MB/s
[ 0.560017] raid6: int64x4 2846 MB/s
[ 0.616667] raid6: int64x8 2701 MB/s
[ 0.673348] raid6: sse2x1 4157 MB/s
[ 0.730004] raid6: sse2x2 7091 MB/s
[ 0.786669] raid6: sse2x4 7848 MB/s
[ 0.786702] raid6: using algorithm sse2x4 (7848 MB/s)
[ 0.786786] PCI: Using ACPI for IRQ routing
[ 0.786825] pci 0000:00:00.0: BAR 3: can't allocate resource
[ 0.800198] PCI-DMA: Disabling AGP.
[ 0.800313] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.800347] PCI-DMA: using GART IOMMU.
[ 0.800382] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.802129] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0
[ 0.802238] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.806695] hpet: hpet2 irq 24 for MSI
[ 0.813350] Switched to high resolution mode on CPU 0
[ 0.814492] Switched to high resolution mode on CPU 3
[ 0.814519] Switched to high resolution mode on CPU 1
[ 0.814556] Switched to high resolution mode on CPU 2
[ 0.826700] pnp: PnP ACPI init
[ 0.826753] ACPI: bus type pnp registered
[ 0.829222] pnp 00:0b: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.829277] pnp 00:0b: mem resource (0xc0000-0xcffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.829332] pnp 00:0b: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.829387] pnp 00:0b: mem resource (0x100000-0xc7efffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.829741] pnp: PnP ACPI: found 12 devices
[ 0.829775] ACPI: ACPI bus type pnp unregistered
[ 0.829816] system 00:06: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.829869] system 00:06: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.829907] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.829942] system 00:07: ioport range 0x40b-0x40b has been reserved
[ 0.829977] system 00:07: ioport range 0x4d6-0x4d6 has been reserved
[ 0.830018] system 00:07: ioport range 0xc00-0xc01 has been reserved
[ 0.830053] system 00:07: ioport range 0xc14-0xc14 has been reserved
[ 0.830088] system 00:07: ioport range 0xc50-0xc51 has been reserved
[ 0.830123] system 00:07: ioport range 0xc52-0xc52 has been reserved
[ 0.830158] system 00:07: ioport range 0xc6c-0xc6c has been reserved
[ 0.830192] system 00:07: ioport range 0xc6f-0xc6f has been reserved
[ 0.830227] system 00:07: ioport range 0xcd0-0xcd1 has been reserved
[ 0.830262] system 00:07: ioport range 0xcd2-0xcd3 has been reserved
[ 0.830297] system 00:07: ioport range 0xcd4-0xcd5 has been reserved
[ 0.830331] system 00:07: ioport range 0xcd6-0xcd7 has been reserved
[ 0.830366] system 00:07: ioport range 0xcd8-0xcdf has been reserved
[ 0.830401] system 00:07: ioport range 0x800-0x89f has been reserved
[ 0.830436] system 00:07: ioport range 0xb00-0xb0f has been reserved
[ 0.830471] system 00:07: ioport range 0xb20-0xb3f has been reserved
[ 0.830505] system 00:07: ioport range 0x900-0x90f has been reserved
[ 0.830540] system 00:07: ioport range 0x910-0x91f has been reserved
[ 0.830575] system 00:07: ioport range 0xfe00-0xfefe has been reserved
[ 0.830610] system 00:07: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.830645] system 00:07: iomem range 0xfec10000-0xfec1001f has been reserved
[ 0.830682] system 00:09: ioport range 0x290-0x29f has been reserved
[ 0.830718] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.830755] system 00:0b: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.835661] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
[ 0.835696] pci 0000:00:02.0: IO window: 0xb000-0xbfff
[ 0.835732] pci 0000:00:02.0: MEM window: 0xfdf00000-0xfdffffff
[ 0.835768] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.835823] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03
[ 0.835857] pci 0000:00:09.0: IO window: 0xc000-0xdfff
[ 0.835893] pci 0000:00:09.0: MEM window: 0xfe000000-0xfebfffff
[ 0.835928] pci 0000:00:09.0: PREFETCH window: 0x000000fa000000-0x000000fcefffff
[ 0.835982] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:01
[ 0.836017] pci 0000:00:0a.0: IO window: 0xa000-0xafff
[ 0.836052] pci 0000:00:0a.0: MEM window: 0xfde00000-0xfdefffff
[ 0.836088] pci 0000:00:0a.0: PREFETCH window: 0x000000cff00000-0x000000cfffffff
[ 0.836142] pci 0000:00:14.4: PCI bridge, secondary bus 0000:05
[ 0.836178] pci 0000:00:14.4: IO window: 0xe000-0xefff
[ 0.836215] pci 0000:00:14.4: MEM window: disabled
[ 0.836251] pci 0000:00:14.4: PREFETCH window: 0x000000fcf00000-0x000000fcffffff
[ 0.836315] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.836351] pci 0000:00:02.0: setting latency timer to 64
[ 0.836357] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.836392] pci 0000:00:09.0: setting latency timer to 64
[ 0.836396] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.836431] pci 0000:00:0a.0: setting latency timer to 64
[ 0.836438] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.836439] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.836441] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff]
[ 0.836442] pci_bus 0000:02: resource 1 mem: [0xfdf00000-0xfdffffff]
[ 0.836444] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.836445] pci_bus 0000:03: resource 0 io: [0xc000-0xdfff]
[ 0.836447] pci_bus 0000:03: resource 1 mem: [0xfe000000-0xfebfffff]
[ 0.836448] pci_bus 0000:03: resource 2 pref mem [0xfa000000-0xfcefffff]
[ 0.836449] pci_bus 0000:01: resource 0 io: [0xa000-0xafff]
[ 0.836451] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.836452] pci_bus 0000:01: resource 2 pref mem [0xcff00000-0xcfffffff]
[ 0.836454] pci_bus 0000:05: resource 0 io: [0xe000-0xefff]
[ 0.836455] pci_bus 0000:05: resource 2 pref mem [0xfcf00000-0xfcffffff]
[ 0.836456] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.836457] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.836508] NET: Registered protocol family 2
[ 0.873408] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.873922] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.874916] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.875314] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.875350] TCP reno registered
[ 0.883431] NET: Registered protocol family 1
[ 0.885125] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.885268] Loading Reiser4. See www.namesys.com for a description of Reiser4.
[ 0.885408] msgmni has been set to 15964
[ 0.885675] alg: No test for stdrng (krng)
[ 0.885715] async_tx: api initialized (sync-only)
[ 0.885794] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.885848] io scheduler noop registered
[ 0.885892] io scheduler cfq registered (default)
[ 0.886016] pci 0000:02:00.0: Boot video device
[ 0.886115] pcieport-driver 0000:00:02.0: irq 25 for MSI/MSI-X
[ 0.886122] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 0.886214] pcieport-driver 0000:00:09.0: irq 26 for MSI/MSI-X
[ 0.886220] pcieport-driver 0000:00:09.0: setting latency timer to 64
[ 0.886308] pcieport-driver 0000:00:0a.0: irq 27 for MSI/MSI-X
[ 0.886315] pcieport-driver 0000:00:0a.0: setting latency timer to 64
[ 0.886532] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.886585] ACPI: Power Button [PWRF]
[ 0.886677] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.886730] ACPI: Power Button [PWRB]
[ 0.886873] processor ACPI_CPU:00: registered as cooling_device0
[ 0.886908] ACPI: Processor [P001] (supports 8 throttling states)
[ 0.887004] processor ACPI_CPU:01: registered as cooling_device1
[ 0.887074] processor ACPI_CPU:02: registered as cooling_device2
[ 0.887145] processor ACPI_CPU:03: registered as cooling_device3
[ 0.890974] Linux agpgart interface v0.103
[ 0.891098] Driver 'sd' needs updating - please use bus_type methods
[ 0.891182] ahci 0000:00:11.0: version 3.0
[ 0.891194] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.891338] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.891392] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 0.891907] scsi0 : ahci
[ 0.892044] scsi1 : ahci
[ 0.892134] scsi2 : ahci
[ 0.892222] scsi3 : ahci
[ 0.892313] scsi4 : ahci
[ 0.892400] scsi5 : ahci
[ 0.892527] ata1: SATA max UDMA/133 irq_stat 0x00400000 irq 22, PHY RDY changed
[ 0.892582] ata2: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddff980 irq 22
[ 0.892636] ata3: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffa00 irq 22
[ 0.892691] ata4: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffa80 irq 22
[ 0.892745] ata5: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffb00 irq 22
[ 0.892799] ata6: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffb80 irq 22
[ 0.893030] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.893067] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.893532] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.893598] mice: PS/2 mouse device common for all mice
[ 0.893731] rtc_cmos 00:02: RTC can wake from S4
[ 0.893805] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.893861] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.893914] md: raid1 personality registered for level 1
[ 0.893948] md: raid6 personality registered for level 6
[ 0.893983] md: raid5 personality registered for level 5
[ 0.894017] md: raid4 personality registered for level 4
[ 0.894124] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 0.894217] cpuidle: using governor ladder
[ 0.894335] usbcore: registered new interface driver hiddev
[ 0.894389] usbcore: registered new interface driver usbhid
[ 0.894424] usbhid: v2.6:USB HID core driver
[ 0.894497] TCP cubic registered
[ 0.894531] NET: Registered protocol family 17
[ 0.894592] powernow-k8: Found 1 AMD Phenom(tm) II X4 955 Processor processors (4 cpu cores) (version 2.20.00)
[ 0.895174] powernow-k8: 0 : pstate 0 (3200 MHz)
[ 0.895210] powernow-k8: 1 : pstate 1 (2500 MHz)
[ 0.895244] powernow-k8: 2 : pstate 2 (2100 MHz)
[ 0.895278] powernow-k8: 3 : pstate 3 (800 MHz)
[ 0.895659] PM: Resume from disk failed.
[ 0.895752] Magic number: 5:759:155
[ 0.895802] acpi device:22: hash matches
[ 0.918908] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.210866] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.210927] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.210985] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.211037] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.211091] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.217280] ata4.00: ATA-7: SAMSUNG HD753LJ, 1AA01113, max UDMA7
[ 1.217321] ata4.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.217367] ata2.00: ATA-7: SAMSUNG HD502IJ, 1AA01110, max UDMA7
[ 1.217402] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.223776] ata4.00: configured for UDMA/133
[ 1.223829] ata2.00: configured for UDMA/133
[ 1.610867] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.617221] ata1.00: ATA-7: SAMSUNG HD502IJ, 1AA01109, max UDMA7
[ 1.617257] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.623677] ata1.00: configured for UDMA/133
[ 1.637999] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5
[ 1.638214] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.638266] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 1.638333] sd 0:0:0:0: [sda] Write Protect is off
[ 1.638350] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5
[ 1.638421] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.638433] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.638475] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 1.638482] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.638484] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.638486] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.638493] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.638536] sdb:<5>scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5
[ 1.638695] sd 3:0:0:0: [sdc] 1465149168 512-byte hardware sectors: (750 GB/698 GiB)
[ 1.638702] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.638704] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.638712] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.638755] sdc:<5>sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1.638933] sda: sda1 sda2 sda3 sda4 < sdc1 sdc2 sdc3 sdc4 < sdb1 sdb2 sdb3 sdb4 < sda5 sdc5 sda6 >
[ 1.660539] sdb5<5>sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.661819] sdc6 sdb6 >
[ 1.672095] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.675012] sdc7 >
[ 1.675339] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.675382] md: Waiting for all devices to be available before autodetect
[ 1.675416] md: If you don't use raid, use raid=noautodetect
[ 1.675516] md: Autodetecting RAID arrays.
[ 1.773512] md: Scanned 12 and added 12 devices.
[ 1.773547] md: autorun ...
[ 1.773581] md: considering sdc6 ...
[ 1.773620] md: adding sdc6 ...
[ 1.773654] md: sdc5 has different UUID to sdc6
[ 1.773688] md: sdc3 has different UUID to sdc6
[ 1.773723] md: sdc1 has different UUID to sdc6
[ 1.773758] md: adding sdb6 ...
[ 1.773792] md: sdb5 has different UUID to sdc6
[ 1.773826] md: sdb3 has different UUID to sdc6
[ 1.773861] md: sdb1 has different UUID to sdc6
[ 1.773896] md: adding sda6 ...
[ 1.773930] md: sda5 has different UUID to sdc6
[ 1.773965] md: sda3 has different UUID to sdc6
[ 1.773999] md: sda1 has different UUID to sdc6
[ 1.774117] md: created md3
[ 1.774151] md: bind<sda6>
[ 1.774188] md: bind<sdb6>
[ 1.774225] md: bind<sdc6>
[ 1.774261] md: running: <sdc6><sdb6><sda6>
[ 1.774392] raid5: device sdc6 operational as raid disk 2
[ 1.774426] raid5: device sdb6 operational as raid disk 1
[ 1.774460] raid5: device sda6 operational as raid disk 0
[ 1.774655] raid5: allocated 3220kB for md3
[ 1.774703] raid5: raid level 5 set md3 active with 3 out of 3 devices, algorithm 2
[ 1.774756] RAID5 conf printout:
[ 1.774789] --- rd:3 wd:3
[ 1.774823] disk 0, o:1, dev:sda6
[ 1.774856] disk 1, o:1, dev:sdb6
[ 1.774890] disk 2, o:1, dev:sdc6
[ 1.774953] md: considering sdc5 ...
[ 1.774989] md: adding sdc5 ...
[ 1.775023] md: sdc3 has different UUID to sdc5
[ 1.775058] md: sdc1 has different UUID to sdc5
[ 1.775093] md: adding sdb5 ...
[ 1.775127] md: sdb3 has different UUID to sdc5
[ 1.775162] md: sdb1 has different UUID to sdc5
[ 1.775197] md: adding sda5 ...
[ 1.775231] md: sda3 has different UUID to sdc5
[ 1.775265] md: sda1 has different UUID to sdc5
[ 1.775356] md: created md2
[ 1.775389] md: bind<sda5>
[ 1.775426] md: bind<sdb5>
[ 1.775463] md: bind<sdc5>
[ 1.775499] md: running: <sdc5><sdb5><sda5>
[ 1.775629] raid5: device sdc5 operational as raid disk 2
[ 1.775663] raid5: device sdb5 operational as raid disk 1
[ 1.775697] raid5: device sda5 operational as raid disk 0
[ 1.775886] raid5: allocated 3220kB for md2
[ 1.775932] raid5: raid level 5 set md2 active with 3 out of 3 devices, algorithm 2
[ 1.775985] RAID5 conf printout:
[ 1.776018] --- rd:3 wd:3
[ 1.776051] disk 0, o:1, dev:sda5
[ 1.776084] disk 1, o:1, dev:sdb5
[ 1.776118] disk 2, o:1, dev:sdc5
[ 1.776180] md: considering sdc3 ...
[ 1.776216] md: adding sdc3 ...
[ 1.776250] md: sdc1 has different UUID to sdc3
[ 1.776285] md: adding sdb3 ...
[ 1.776319] md: sdb1 has different UUID to sdc3
[ 1.776354] md: adding sda3 ...
[ 1.776388] md: sda1 has different UUID to sdc3
[ 1.776480] md: created md1
[ 1.776513] md: bind<sda3>
[ 1.776551] md: bind<sdb3>
[ 1.776588] md: bind<sdc3>
[ 1.776624] md: running: <sdc3><sdb3><sda3>
[ 1.776755] raid5: device sdc3 operational as raid disk 2
[ 1.776790] raid5: device sdb3 operational as raid disk 1
[ 1.776824] raid5: device sda3 operational as raid disk 0
[ 1.777017] raid5: allocated 3220kB for md1
[ 1.777064] raid5: raid level 5 set md1 active with 3 out of 3 devices, algorithm 2
[ 1.777116] RAID5 conf printout:
[ 1.777150] --- rd:3 wd:3
[ 1.777183] disk 0, o:1, dev:sda3
[ 1.777216] disk 1, o:1, dev:sdb3
[ 1.777250] disk 2, o:1, dev:sdc3
[ 1.777313] md: considering sdc1 ...
[ 1.777351] md: adding sdc1 ...
[ 1.777386] md: adding sdb1 ...
[ 1.777421] md: adding sda1 ...
[ 1.777454] md: created md0
[ 1.777487] md: bind<sda1>
[ 1.777524] md: bind<sdb1>
[ 1.777560] md: bind<sdc1>
[ 1.777597] md: running: <sdc1><sdb1><sda1>
[ 1.777755] raid1: raid set md0 active with 3 out of 3 mirrors
[ 1.777816] md: ... autorun DONE.
[ 1.777867] md: Loading md3: /dev/sda3
[ 1.777906] md3: unknown partition table
[ 1.778067] md: couldn't update array info. -22
[ 1.778104] md: could not bd_claim sda3.
[ 1.778138] md: md_import_device returned -16
[ 1.778174] md: could not bd_claim sdb3.
[ 1.778207] md: md_import_device returned -16
[ 1.778243] md: could not bd_claim sdc3.
[ 1.778276] md: md_import_device returned -16
[ 1.778311] md: starting md3 failed
[ 1.778386] md1: unknown partition table
[ 1.815947] reiser4: md1: found disk format 4.0.0.
[ 5.835444] VFS: Mounted root (reiser4 filesystem) readonly on device 9:1.
[ 5.835495] Freeing unused kernel memory: 348k freed
[ 8.831192] udev: starting version 145
[ 8.956611] md0:<6> md2: unknown partition table
[ 8.992687] unknown partition table
[ 9.615011] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 9.615028] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 9.615042] r8169 0000:03:00.0: setting latency timer to 64
[ 9.615310] r8169 0000:03:00.0: irq 28 for MSI/MSI-X
[ 9.615384] eth0: RTL8168b/8111b at 0xffffc20012dec000, 00:e0:45:46:00:29, XID 38000000 IRQ 28
[ 9.616772] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 9.616780] r8169 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 9.616788] r8169 0000:01:00.0: setting latency timer to 64
[ 9.616840] r8169 0000:01:00.0: irq 29 for MSI/MSI-X
[ 9.616887] eth1: RTL8168c/8111c at 0xffffc2000006a000, 00:19:66:86:ce:12, XID 3c4000c0 IRQ 29
[ 9.620294] udev: renamed network interface eth1 to eth0
[ 9.641911] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 9.641933] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 9.641970] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 9.642198] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 9.642222] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[ 9.642238] ehci_hcd 0000:00:12.2: debug port 1
[ 9.642255] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfddff000
[ 9.651263] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 9.651288] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 9.651290] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.651291] usb usb1: Product: EHCI Host Controller
[ 9.651292] usb usb1: Manufacturer: Linux 2.6.30.5r4 ehci_hcd
[ 9.651293] usb usb1: SerialNumber: 0000:00:12.2
[ 9.651638] usb usb1: configuration #1 chosen from 1 choice
[ 9.651679] hub 1-0:1.0: USB hub found
[ 9.651685] hub 1-0:1.0: 6 ports detected
[ 9.651813] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 9.651834] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 9.651994] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 9.652012] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[ 9.652028] ehci_hcd 0000:00:13.2: debug port 1
[ 9.652041] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfddf6800
[ 9.661263] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 9.661274] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 9.661275] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.661276] usb usb2: Product: EHCI Host Controller
[ 9.661277] usb usb2: Manufacturer: Linux 2.6.30.5r4 ehci_hcd
[ 9.661278] usb usb2: SerialNumber: 0000:00:13.2
[ 9.661346] usb usb2: configuration #1 chosen from 1 choice
[ 9.661374] hub 2-0:1.0: USB hub found
[ 9.661378] hub 2-0:1.0: 6 ports detected
[ 9.670316] udev: renamed network interface _rename to eth1
[ 9.691307] Linux video capture interface: v2.00
[ 9.699465] bttv: driver version 0.9.18 loaded
[ 9.699467] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 9.699515] bttv: Bt8xx card found (0).
[ 9.699527] bttv 0000:05:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 9.699537] bttv0: Bt848 (rev 18) at 0000:05:06.0, irq: 21, latency: 128, mmio: 0xfcfff000
[ 9.699567] bttv0: using: Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar [card=25,insmod option]
[ 9.699569] IRQ 21/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs
[ 9.699603] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
[ 9.957103] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 10.082077] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
[ 10.082079] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 10.082081] usb 1-2: Product: USB2.0 Hub
[ 10.082130] usb 1-2: configuration #1 chosen from 1 choice
[ 10.082560] hub 1-2:1.0: USB hub found
[ 10.082825] hub 1-2:1.0: 4 ports detected
[ 10.351118] usb 1-2.2: new low speed USB device using ehci_hcd and address 3
[ 10.440497] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c518
[ 10.440499] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 10.440501] usb 1-2.2: Product: USB Receiver
[ 10.440502] usb 1-2.2: Manufacturer: Logitech
[ 10.440535] usb 1-2.2: configuration #1 chosen from 1 choice
[ 10.450750] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.0/input/input3
[ 10.450789] generic-usb 0003:046D:C518.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.2-2.2/input0
[ 10.455931] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.1/input/input4
[ 10.455981] generic-usb 0003:046D:C518.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-2.2/input1
[ 10.700030] bttv0: tea5757: read timeout
[ 10.700032] bttv0: tuner type=5
[ 10.711868] All bytes are equal. It is not a TEA5767
[ 10.711899] tuner 0-0060: chip found @ 0xc0 (bt848 #0 [sw])
[ 10.714766] tuner-simple 0-0060: creating new instance
[ 10.714768] tuner-simple 0-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
[ 10.727127] bttv0: audio absent, no audio device found!
[ 10.727193] bttv0: registered device video0
[ 10.727219] bttv0: registered device vbi0
[ 11.006704] reiser4: md2: found disk format 4.0.0.
[ 12.788508] reiser4: md3: found disk format 4.0.0.
[ 54.187328] reiser4: sdc7: found disk format 4.0.0.
[ 66.507842] Adding 7815612k swap on /dev/sda2. Priority:1 extents:1 across:7815612k
[ 66.514717] Adding 7815612k swap on /dev/sdb2. Priority:1 extents:1 across:7815612k
[ 66.584800] Adding 7815612k swap on /dev/sdc2. Priority:1 extents:1 across:7815612k
[ 67.187645] w83627ehf: Found W83627EHG chip at 0x290
[ 67.569061] r8169: eth0: link up
[ 67.569070] r8169: eth0: link up
[ 67.573771] r8169: eth1: link down
[ 70.343374] EMU10K1_Audigy 0000:05:08.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 70.350367] Audigy2 value: Special config.
[ 71.704750] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 71.704759] Disabling lock debugging due to kernel taint
[ 71.752696] [fglrx] Maximum main memory to use for locked dma buffers: 7749 MBytes.
[ 71.752961] [fglrx] vendor: 1002 device: 9501 count: 1
[ 71.753615] [fglrx] ioport: bar 4, base 0xb000, size: 0x100
[ 71.753637] pci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 71.753646] pci 0000:02:00.0: setting latency timer to 64
[ 71.754126] [fglrx] Kernel PAT support is enabled
[ 71.754163] [fglrx] module loaded - fglrx 8.66.2 [Aug 25 2009] with 1 minors
[ 71.953696] fglrx_pci 0000:02:00.0: irq 30 for MSI/MSI-X
[ 71.954048] [fglrx] Firegl kernel thread PID: 3883
[ 74.083532] [fglrx] Gart USWC size:1279 M.
[ 74.083534] [fglrx] Gart cacheable size:508 M.
[ 74.083538] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 74.083540] [fglrx] Reserved FB block: Unshared offset:fbff000, size:401000
[ 74.083541] [fglrx] Reserved FB block: Unshared offset:1fffc000, size:4000
[ 611.862435] reiser4[ktxnmgrd:md1:ru(537)]: disable_write_barrier (fs/reiser4/wander.c:235)[zam-1055]:
[ 611.862436] NOTICE: md1 does not support write barriers, using synchronous write instead.
[ 670.057754] reiser4[pickup(3743)]: disable_write_barrier (fs/reiser4/wander.c:235)[zam-1055]:
[ 670.057755] NOTICE: md2 does not support write barriers, using synchronous write instead.
[ 692.937317] reiser4[ktxnmgrd:md3:ru(2705)]: disable_write_barrier (fs/reiser4/wander.c:235)[zam-1055]:
[ 692.937318] NOTICE: md3 does not support write barriers, using synchronous write instead.
[ 6000.574616] usb 1-2.2: reset low speed USB device using ehci_hcd and address 3
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: amd64 + mtrr: only 3.1gb of 8gb are covered, kernel 2.6.30 and earlier.
2009-08-27 1:13 ` Volker Armin Hemmann
@ 2009-08-27 7:13 ` Yinghai Lu
2009-08-27 16:28 ` Volker Armin Hemmann
2009-09-19 20:11 ` Volker Armin Hemmann
0 siblings, 2 replies; 15+ messages in thread
From: Yinghai Lu @ 2009-08-27 7:13 UTC (permalink / raw)
To: Volker Armin Hemmann; +Cc: linux-kernel
On Wed, Aug 26, 2009 at 6:13 PM, Volker Armin
Hemmann<volkerarmin@googlemail.com> wrote:
> Hi,
>
> On Sonntag 23 August 2009, Yinghai Lu wrote:
>> On Sat, Aug 22, 2009 at 12:26 PM, Volker Armin
>>
>> Hemmann<volkerarmin@googlemail.com> wrote:
>> > when I went from 4gb to 6gb I had a performance degradation. Since the
>> > 8gb are faster and the new cpu is faster, I don't see degradation. But I
>> > wonder how much better performance could be with 'correct' mtrr.
>>
>> that is weird. with 4g should have mem hole remapping.
>>
>> do you still have /proc/mtrr for 6g setup?
>>
>> YH
>
> some more information, mtrr of 8gb with my X2 6000:
>
> reg00: base=0x000000000 ( 0MB), size= 2048MB, count=1: write-back
> reg01: base=0x080000000 ( 2048MB), size= 1024MB, count=1: write-back
> reg02: base=0x0c0000000 ( 3072MB), size= 128MB, count=1: write-back
> reg03: base=0x0c8000000 ( 3200MB), size= 64MB, count=1: write-back
> reg04: base=0x0cc000000 ( 3264MB), size= 32MB, count=1: write-back
> reg05: base=0x0ce000000 ( 3296MB), size= 16MB, count=1: write-back
>
> from June with 2.6.30, dmesg from that incident is attached
>
> compared that with the mtrr with my X4:
>
> reg00: base=0x000000000 ( 0MB), size= 2048MB, count=1: write-back
> reg01: base=0x080000000 ( 2048MB), size= 1024MB, count=1: write-back
> reg02: base=0x0c0000000 ( 3072MB), size= 128MB, count=1: write-back
>
>
> just ignore the fgrlx parts - whenever I checked it did not made a difference
> if X was started or not.
>
theo one with X4, you got extra device
[ 0.383812] pci 0000:03:00.0: reg 10 io port: [0xd800-0xd8ff]
[ 0.383828] pci 0000:03:00.0: reg 18 64bit mmio: [0xfebff000-0xfebfffff]
[ 0.383844] pci 0000:03:00.0: reg 30 32bit mmio: [0xfebc0000-0xfebdffff]
[ 0.383878] pci 0000:03:00.0: supports D1 D2
[ 0.383879] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.383916] pci 0000:03:00.0: PME# disabled
so BIOS allocate more mmio space for it.
YH
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: amd64 + mtrr: only 3.1gb of 8gb are covered, kernel 2.6.30 and earlier.
2009-08-27 7:13 ` Yinghai Lu
@ 2009-08-27 16:28 ` Volker Armin Hemmann
2009-09-19 20:11 ` Volker Armin Hemmann
1 sibling, 0 replies; 15+ messages in thread
From: Volker Armin Hemmann @ 2009-08-27 16:28 UTC (permalink / raw)
To: Yinghai Lu, linux-kernel
On Donnerstag 27 August 2009, you wrote:
> On Wed, Aug 26, 2009 at 6:13 PM, Volker Armin
>
> Hemmann<volkerarmin@googlemail.com> wrote:
> > Hi,
> >
> > On Sonntag 23 August 2009, Yinghai Lu wrote:
> >> On Sat, Aug 22, 2009 at 12:26 PM, Volker Armin
> >>
> >> Hemmann<volkerarmin@googlemail.com> wrote:
> >> > when I went from 4gb to 6gb I had a performance degradation. Since the
> >> > 8gb are faster and the new cpu is faster, I don't see degradation. But
> >> > I wonder how much better performance could be with 'correct' mtrr.
> >>
> >> that is weird. with 4g should have mem hole remapping.
> >>
> >> do you still have /proc/mtrr for 6g setup?
> >>
> >> YH
> >
> > some more information, mtrr of 8gb with my X2 6000:
> >
> > reg00: base=0x000000000 ( 0MB), size= 2048MB, count=1: write-back
> > reg01: base=0x080000000 ( 2048MB), size= 1024MB, count=1: write-back
> > reg02: base=0x0c0000000 ( 3072MB), size= 128MB, count=1: write-back
> > reg03: base=0x0c8000000 ( 3200MB), size= 64MB, count=1: write-back
> > reg04: base=0x0cc000000 ( 3264MB), size= 32MB, count=1: write-back
> > reg05: base=0x0ce000000 ( 3296MB), size= 16MB, count=1: write-back
> >
> > from June with 2.6.30, dmesg from that incident is attached
> >
> > compared that with the mtrr with my X4:
> >
> > reg00: base=0x000000000 ( 0MB), size= 2048MB, count=1: write-back
> > reg01: base=0x080000000 ( 2048MB), size= 1024MB, count=1: write-back
> > reg02: base=0x0c0000000 ( 3072MB), size= 128MB, count=1: write-back
> >
> >
> > just ignore the fgrlx parts - whenever I checked it did not made a
> > difference if X was started or not.
>
> theo one with X4, you got extra device
>
> [ 0.383812] pci 0000:03:00.0: reg 10 io port: [0xd800-0xd8ff]
> [ 0.383828] pci 0000:03:00.0: reg 18 64bit mmio: [0xfebff000-0xfebfffff]
> [ 0.383844] pci 0000:03:00.0: reg 30 32bit mmio: [0xfebc0000-0xfebdffff]
> [ 0.383878] pci 0000:03:00.0: supports D1 D2
> [ 0.383879] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
> [ 0.383916] pci 0000:03:00.0: PME# disabled
>
> so BIOS allocate more mmio space for it.
>
> YH
that card is (as far as I can see) an additional networking card from realtek
I put into the pcie1x slot. On the other hand I also removed a scsi card in
the mean time.
I removed that card:
cat /proc/mtrr
reg00: base=0x000000000 ( 0MB), size= 2048MB, count=1: write-back
reg01: base=0x080000000 ( 2048MB), size= 1024MB, count=1: write-back
reg02: base=0x0c0000000 ( 3072MB), size= 128MB, count=1: write-back
dmesg
[ 0.000000] Linux version 2.6.30.5r4 (root@energy) (gcc version 4.4.1
(Gentoo 4.4.1 p1.0) ) #1 SMP Tue Aug 18 06:28:18 CEST 2009
[ 0.000000] Command line: root=/dev/md1 md=3,/dev/sda3,/dev/sdb3,/dev/sdc3
nmi_watchdog=0 mtrr_spare_reg_nr=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7eb0000 (usable)
[ 0.000000] BIOS-e820: 00000000c7eb0000 - 00000000c7ec0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000c7ec0000 - 00000000c7ef0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000c7ef0000 - 00000000c7f00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000238000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable)
==> (reserved)
[ 0.000000] last_pfn = 0x238000 max_arch_pfn = 0x100000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF8000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000238000000 aka 9088M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] e820 update range: 00000000c8000000 - 0000000100000000 (usable)
==> (reserved)
[ 0.000000] last_pfn = 0xc7eb0 max_arch_pfn = 0x100000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000c7eb0000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00c7e00000 page 2M
[ 0.000000] 00c7e00000 - 00c7eb0000 page 4k
[ 0.000000] kernel direct mapping tables up to c7eb0000 @ 10000-13000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000238000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] 0100000000 - 0200000000 page 1G
[ 0.000000] 0200000000 - 0238000000 page 2M
[ 0.000000] kernel direct mapping tables up to 238000000 @ 12000-14000
[ 0.000000] ACPI: RSDP 00000000000fa7c0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000c7eb0000 00040 (v01 050609 RSDT2000 20090506
MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000c7eb0200 00084 (v02 A M I OEMFACP 12000601
MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000c7eb0440 08512 (v01 AS140 AS140121 00000121
INTL 20051117)
[ 0.000000] ACPI: FACS 00000000c7ec0000 00040
[ 0.000000] ACPI: APIC 00000000c7eb0390 0006C (v01 050609 APIC2000 20090506
MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000c7eb0400 0003C (v01 050609 OEMMCFG 20090506
MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000c7ec0040 00071 (v01 050609 OEMB2000 20090506
MSFT 00000097)
[ 0.000000] ACPI: AAFT 00000000c7eb8960 00027 (v01 050609 OEMAAFT 20090506
MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000c7eb8990 00038 (v01 050609 OEMHPET 20090506
MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000c7eb89d0 0088C (v01 A M I POWERNOW 00000001
AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0238000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000
- 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000
- 0000008000]
[ 0.000000] #2 [0001000000 - 0001575998] TEXT DATA BSS ==> [0001000000
- 0001575998]
[ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00
- 0000100000]
[ 0.000000] #4 [0001576000 - 0001576133] BRK ==> [0001576000
- 0001576133]
[ 0.000000] #5 [0000010000 - 0000012000] PGTABLE ==> [0000010000
- 0000012000]
[ 0.000000] #6 [0000012000 - 0000013000] PGTABLE ==> [0000012000
- 0000013000]
[ 0.000000] [ffffe20000000000-ffffe20007dfffff] PMD -> [ffff880028200000-
ffff88002fffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00238000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000c7eb0
[ 0.000000] 0: 0x00100000 -> 0x00238000
[ 0.000000] On node 0 totalpages: 2096703
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 102 pages reserved
[ 0.000000] DMA zone: 3825 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 800488 pages, LIFO batch:31
[ 0.000000] Normal zone: 17472 pages used for memmap
[ 0.000000] Normal zone: 1260480 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e6000
[ 0.000000] PM: Registered nosave memory: 00000000000e6000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000c7eb0000 -
00000000c7ec0000
[ 0.000000] PM: Registered nosave memory: 00000000c7ec0000 -
00000000c7ef0000
[ 0.000000] PM: Registered nosave memory: 00000000c7ef0000 -
00000000c7f00000
[ 0.000000] PM: Registered nosave memory: 00000000c7f00000 -
00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at c8000000 (gap:
c7f00000:38000000)
[ 0.000000] NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 24 pages at ffff880028034000, static data 67808
bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 2064793
[ 0.000000] Kernel command line: root=/dev/md1
md=3,/dev/sda3,/dev/sdb3,/dev/sdc3 nmi_watchdog=0 mtrr_spare_reg_nr=1
[ 0.000000] md: Will configure md3 (super-block) from
/dev/sda3,/dev/sdb3,/dev/sdc3, below.
[ 0.000000] Initializing CPU#0
[ 0.000000] NR_IRQS:384
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3200.022 MHz processor.
[ 0.003333] Console: colour VGA+ 80x25
[ 0.003333] console [tty0] enabled
[ 0.003333] Dentry cache hash table entries: 1048576 (order: 11, 8388608
bytes)
[ 0.003333] Inode-cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 0.003333] Checking aperture...
[ 0.003333] No AGP bridge found
[ 0.003333] Node 0: aperture @ 2242000000 size 32 MB
[ 0.003333] Aperture beyond 4GB. Ignoring.
[ 0.003333] Your BIOS doesn't leave a aperture memory hole
[ 0.003333] Please enable the IOMMU option in the BIOS setup
[ 0.003333] This costs you 64 MB of RAM
[ 0.003333] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.003333] PM: Registered nosave memory: 0000000020000000 -
0000000024000000
[ 0.003333] Memory: 8172700k/9306112k available (3231k kernel code, 919300k
absent, 213188k reserved, 1310k data, 348k init)
[ 0.003333] hpet clockevent registered
[ 0.003333] HPET: 4 timers in total, 1 timers will be used for per-cpu
timer
[ 0.003338] Calibrating delay loop (skipped), value calculated using timer
frequency.. 6402.70 BogoMIPS (lpj=10666726)
[ 0.003444] Mount-cache hash table entries: 256
[ 0.003563] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.003598] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003632] tseg: 0000000000
[ 0.003638] CPU: Physical Processor ID: 0
[ 0.003671] CPU: Processor Core ID: 0
[ 0.003709] using C1E aware idle routine
[ 0.003752] ACPI: Core revision 20090320
[ 0.016701] Setting APIC routing to flat
[ 0.017037] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.050747] CPU0: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.053332] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.003333] Initializing CPU#1
[ 0.003333] Calibrating delay using timer specific routine.. 6402.85
BogoMIPS (lpj=10666968)
[ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.003333] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 1
[ 0.003333] x86 PAT enabled: cpu 1, old 0x7040600070406, new
0x7010600070106
[ 0.144204] CPU1: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.144516] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.146715] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.003333] Initializing CPU#2
[ 0.003333] Calibrating delay using timer specific routine.. 6402.85
BogoMIPS (lpj=10666966)
[ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.003333] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 2
[ 0.003333] x86 PAT enabled: cpu 2, old 0x7040600070406, new
0x7010600070106
[ 0.240831] CPU2: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.241143] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.243382] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.003333] Initializing CPU#3
[ 0.003333] Calibrating delay using timer specific routine.. 6402.86
BogoMIPS (lpj=10666977)
[ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.003333] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 3
[ 0.003333] x86 PAT enabled: cpu 3, old 0x7040600070406, new
0x7010600070106
[ 0.337458] CPU3: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.337769] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.340014] Brought up 4 CPUs
[ 0.340048] Total of 4 processors activated (25610.27 BogoMIPS).
[ 0.340314] net_namespace: 1400 bytes
[ 0.340417] xor: automatically using best checksumming function:
generic_sse
[ 0.356667] generic_sse: 12783.600 MB/sec
[ 0.356701] xor: using function: generic_sse (12783.600 MB/sec)
[ 0.356754] Time: 18:24:15 Date: 08/27/09
[ 0.356837] NET: Registered protocol family 16
[ 0.357042] node 0 link 0: io port [1000, ffffff]
[ 0.357044] TOM: 00000000c8000000 aka 3200M
[ 0.357078] Fam 10h mmconf [e0000000, efffffff]
[ 0.357080] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.357082] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.357084] node 0 link 0: mmio [a0000, bffff]
[ 0.357085] node 0 link 0: mmio [c8000000, dfffffff]
[ 0.357087] TOM2: 0000000238000000 aka 9088M
[ 0.357120] bus: [00,07] on node 0 link 0
[ 0.357122] bus: 00 index 0 io port: [0, ffff]
[ 0.357123] bus: 00 index 1 mmio: [f0000000, ffffffff]
[ 0.357124] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.357125] bus: 00 index 3 mmio: [c8000000, dfffffff]
[ 0.357126] bus: 00 index 4 mmio: [238000000, fcffffffff]
[ 0.357133] ACPI: bus type pci registered
[ 0.357236] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.357271] PCI: Not using MMCONFIG.
[ 0.357305] PCI: Using configuration type 1 for base access
[ 0.357338] PCI: Using configuration type 1 for extended access
[ 0.358956] bio: create slab <bio-0> at 0
[ 0.359399] ACPI: EC: Look up EC in DSDT
[ 0.367245] ACPI: Interpreter enabled
[ 0.367280] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.367395] ACPI: Using IOAPIC for interrupt routing
[ 0.367473] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.370672] PCI: MCFG area at e0000000 reserved in ACPI motherboard
resources
[ 0.375800] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.381629] ACPI: No dock devices found.
[ 0.381855] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.381960] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
[ 0.382006] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.382041] pci 0000:00:02.0: PME# disabled
[ 0.382108] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.382143] pci 0000:00:09.0: PME# disabled
[ 0.382688] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.382723] pci 0000:00:0a.0: PME# disabled
[ 0.382801] pci 0000:00:11.0: reg 10 io port: [0xa000-0xa007]
[ 0.382807] pci 0000:00:11.0: reg 14 io port: [0x9000-0x9003]
[ 0.382813] pci 0000:00:11.0: reg 18 io port: [0x8000-0x8007]
[ 0.382818] pci 0000:00:11.0: reg 1c io port: [0x7000-0x7003]
[ 0.382824] pci 0000:00:11.0: reg 20 io port: [0x6000-0x600f]
[ 0.382830] pci 0000:00:11.0: reg 24 32bit mmio: [0xfddff800-0xfddffbff]
[ 0.382879] pci 0000:00:12.0: reg 10 32bit mmio: [0xfddfe000-0xfddfefff]
[ 0.382930] pci 0000:00:12.1: reg 10 32bit mmio: [0xfddfd000-0xfddfdfff]
[ 0.382998] pci 0000:00:12.2: reg 10 32bit mmio: [0xfddff000-0xfddff0ff]
[ 0.383047] pci 0000:00:12.2: supports D1 D2
[ 0.383049] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.383085] pci 0000:00:12.2: PME# disabled
[ 0.383146] pci 0000:00:13.0: reg 10 32bit mmio: [0xfddfc000-0xfddfcfff]
[ 0.383197] pci 0000:00:13.1: reg 10 32bit mmio: [0xfddf7000-0xfddf7fff]
[ 0.383266] pci 0000:00:13.2: reg 10 32bit mmio: [0xfddf6800-0xfddf68ff]
[ 0.383315] pci 0000:00:13.2: supports D1 D2
[ 0.383316] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.383336] pci 0000:00:13.2: PME# disabled
[ 0.383478] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[ 0.383484] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[ 0.383490] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.383495] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.383501] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
[ 0.383626] pci 0000:00:14.5: reg 10 32bit mmio: [0xfddf5000-0xfddf5fff]
[ 0.383760] pci 0000:02:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.383767] pci 0000:02:00.0: reg 18 64bit mmio: [0xfdff0000-0xfdffffff]
[ 0.383771] pci 0000:02:00.0: reg 20 io port: [0xc000-0xc0ff]
[ 0.383778] pci 0000:02:00.0: reg 30 32bit mmio: [0xfdfc0000-0xfdfdffff]
[ 0.383794] pci 0000:02:00.0: supports D1 D2
[ 0.383821] pci 0000:02:00.1: reg 10 64bit mmio: [0xfdfec000-0xfdfeffff]
[ 0.383852] pci 0000:02:00.1: supports D1 D2
[ 0.383901] pci 0000:00:02.0: bridge io port: [0xc000-0xcfff]
[ 0.383903] pci 0000:00:02.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
[ 0.383906] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.383948] pci 0000:00:09.0: bridge io port: [0xd000-0xdfff]
[ 0.383950] pci 0000:00:09.0: bridge 32bit mmio: [0xfe000000-0xfebfffff]
[ 0.383953] pci 0000:00:09.0: bridge 64bit mmio pref: [0xfa000000-0xfcefffff]
[ 0.383984] pci 0000:01:00.0: reg 10 io port: [0xb800-0xb8ff]
[ 0.383997] pci 0000:01:00.0: reg 18 64bit mmio: [0xcffff000-0xcfffffff]
[ 0.384007] pci 0000:01:00.0: reg 20 64bit mmio: [0xcffe0000-0xcffeffff]
[ 0.384012] pci 0000:01:00.0: reg 30 32bit mmio: [0xfdef0000-0xfdefffff]
[ 0.384039] pci 0000:01:00.0: supports D1 D2
[ 0.384040] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.384077] pci 0000:01:00.0: PME# disabled
[ 0.384162] pci 0000:00:0a.0: bridge io port: [0xb000-0xbfff]
[ 0.384164] pci 0000:00:0a.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.384167] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xcff00000-0xcfffffff]
[ 0.384201] pci 0000:05:06.0: reg 10 32bit mmio: [0xfcfff000-0xfcffffff]
[ 0.384282] pci 0000:05:08.0: reg 10 io port: [0xe800-0xe83f]
[ 0.384339] pci 0000:05:08.0: supports D1 D2
[ 0.384381] pci 0000:00:14.4: transparent bridge
[ 0.384417] pci 0000:00:14.4: bridge io port: [0xe000-0xefff]
[ 0.384423] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfcf00000-0xfcffffff]
[ 0.384435] pci_bus 0000:00: on NUMA node 0
[ 0.384439] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.384573] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.384617] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.384661] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.384723] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 0.387558] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
[ 0.387802] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
[ 0.388043] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[ 0.388284] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[ 0.388525] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0,
disabled.
[ 0.388812] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 12 14 15)
[ 0.389052] ACPI: PCI Interrupt Link [LNKG] (IRQs *4 10 11 12 14 15)
[ 0.389281] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 12 14 15)
[ 0.389666] SCSI subsystem initialized
[ 0.389752] libata version 3.00 loaded.
[ 0.389823] usbcore: registered new interface driver usbfs
[ 0.389879] usbcore: registered new interface driver hub
[ 0.389943] usbcore: registered new device driver usb
[ 0.446679] raid6: int64x1 2811 MB/s
[ 0.503351] raid6: int64x2 3615 MB/s
[ 0.560018] raid6: int64x4 2850 MB/s
[ 0.616675] raid6: int64x8 2698 MB/s
[ 0.673347] raid6: sse2x1 4188 MB/s
[ 0.730011] raid6: sse2x2 7192 MB/s
[ 0.786667] raid6: sse2x4 7958 MB/s
[ 0.786701] raid6: using algorithm sse2x4 (7958 MB/s)
[ 0.786782] PCI: Using ACPI for IRQ routing
[ 0.786821] pci 0000:00:00.0: BAR 3: can't allocate resource
[ 0.800181] PCI-DMA: Disabling AGP.
[ 0.800296] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.800330] PCI-DMA: using GART IOMMU.
[ 0.800365] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.802132] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0
[ 0.802239] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.806694] hpet: hpet2 irq 24 for MSI
[ 0.816683] Switched to high resolution mode on CPU 0
[ 0.817794] Switched to high resolution mode on CPU 3
[ 0.817836] Switched to high resolution mode on CPU 2
[ 0.817876] Switched to high resolution mode on CPU 1
[ 0.826699] pnp: PnP ACPI init
[ 0.826750] ACPI: bus type pnp registered
[ 0.829210] pnp 00:0b: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3
(0x0-0x1fffffff), disabling
[ 0.829264] pnp 00:0b: mem resource (0xc0000-0xcffff) overlaps 0000:00:00.0
BAR 3 (0x0-0x1fffffff), disabling
[ 0.829318] pnp 00:0b: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0
BAR 3 (0x0-0x1fffffff), disabling
[ 0.829372] pnp 00:0b: mem resource (0x100000-0xc7efffff) overlaps
0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.829725] pnp: PnP ACPI: found 12 devices
[ 0.829758] ACPI: ACPI bus type pnp unregistered
[ 0.829798] system 00:06: iomem range 0xfec00000-0xfec00fff could not be
reserved
[ 0.829851] system 00:06: iomem range 0xfee00000-0xfee00fff has been
reserved
[ 0.829888] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.829923] system 00:07: ioport range 0x40b-0x40b has been reserved
[ 0.829957] system 00:07: ioport range 0x4d6-0x4d6 has been reserved
[ 0.830008] system 00:07: ioport range 0xc00-0xc01 has been reserved
[ 0.830043] system 00:07: ioport range 0xc14-0xc14 has been reserved
[ 0.830077] system 00:07: ioport range 0xc50-0xc51 has been reserved
[ 0.830112] system 00:07: ioport range 0xc52-0xc52 has been reserved
[ 0.830146] system 00:07: ioport range 0xc6c-0xc6c has been reserved
[ 0.830181] system 00:07: ioport range 0xc6f-0xc6f has been reserved
[ 0.830215] system 00:07: ioport range 0xcd0-0xcd1 has been reserved
[ 0.830250] system 00:07: ioport range 0xcd2-0xcd3 has been reserved
[ 0.830284] system 00:07: ioport range 0xcd4-0xcd5 has been reserved
[ 0.830318] system 00:07: ioport range 0xcd6-0xcd7 has been reserved
[ 0.830353] system 00:07: ioport range 0xcd8-0xcdf has been reserved
[ 0.830387] system 00:07: ioport range 0x800-0x89f has been reserved
[ 0.830422] system 00:07: ioport range 0xb00-0xb0f has been reserved
[ 0.830456] system 00:07: ioport range 0xb20-0xb3f has been reserved
[ 0.830490] system 00:07: ioport range 0x900-0x90f has been reserved
[ 0.830525] system 00:07: ioport range 0x910-0x91f has been reserved
[ 0.830559] system 00:07: ioport range 0xfe00-0xfefe has been reserved
[ 0.830594] system 00:07: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.830629] system 00:07: iomem range 0xfec10000-0xfec1001f has been
reserved
[ 0.830666] system 00:09: ioport range 0x290-0x29f has been reserved
[ 0.830701] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.830738] system 00:0b: iomem range 0xfec00000-0xffffffff could not be
reserved
[ 0.835626] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
[ 0.835661] pci 0000:00:02.0: IO window: 0xc000-0xcfff
[ 0.835696] pci 0000:00:02.0: MEM window: 0xfdf00000-0xfdffffff
[ 0.835731] pci 0000:00:02.0: PREFETCH window:
0x000000d0000000-0x000000dfffffff
[ 0.835786] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03
[ 0.835820] pci 0000:00:09.0: IO window: 0xd000-0xdfff
[ 0.835855] pci 0000:00:09.0: MEM window: 0xfe000000-0xfebfffff
[ 0.835890] pci 0000:00:09.0: PREFETCH window:
0x000000fa000000-0x000000fcefffff
[ 0.835944] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:01
[ 0.835978] pci 0000:00:0a.0: IO window: 0xb000-0xbfff
[ 0.836013] pci 0000:00:0a.0: MEM window: 0xfde00000-0xfdefffff
[ 0.836048] pci 0000:00:0a.0: PREFETCH window:
0x000000cff00000-0x000000cfffffff
[ 0.836102] pci 0000:00:14.4: PCI bridge, secondary bus 0000:05
[ 0.836138] pci 0000:00:14.4: IO window: 0xe000-0xefff
[ 0.836175] pci 0000:00:14.4: MEM window: disabled
[ 0.836210] pci 0000:00:14.4: PREFETCH window:
0x000000fcf00000-0x000000fcffffff
[ 0.836273] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.836309] pci 0000:00:02.0: setting latency timer to 64
[ 0.836315] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.836350] pci 0000:00:09.0: setting latency timer to 64
[ 0.836353] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.836388] pci 0000:00:0a.0: setting latency timer to 64
[ 0.836395] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.836397] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.836398] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
[ 0.836400] pci_bus 0000:02: resource 1 mem: [0xfdf00000-0xfdffffff]
[ 0.836401] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.836403] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 0.836404] pci_bus 0000:03: resource 1 mem: [0xfe000000-0xfebfffff]
[ 0.836405] pci_bus 0000:03: resource 2 pref mem [0xfa000000-0xfcefffff]
[ 0.836407] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
[ 0.836408] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.836409] pci_bus 0000:01: resource 2 pref mem [0xcff00000-0xcfffffff]
[ 0.836411] pci_bus 0000:05: resource 0 io: [0xe000-0xefff]
[ 0.836412] pci_bus 0000:05: resource 2 pref mem [0xfcf00000-0xfcffffff]
[ 0.836413] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.836415] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.836469] NET: Registered protocol family 2
[ 0.873408] IP route cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.873917] TCP established hash table entries: 262144 (order: 10, 4194304
bytes)
[ 0.874894] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.875291] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.875325] TCP reno registered
[ 0.883426] NET: Registered protocol family 1
[ 0.885125] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.885267] Loading Reiser4. See www.namesys.com for a description of
Reiser4.
[ 0.885403] msgmni has been set to 15964
[ 0.885670] alg: No test for stdrng (krng)
[ 0.885707] async_tx: api initialized (sync-only)
[ 0.885786] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 0.885840] io scheduler noop registered
[ 0.885883] io scheduler cfq registered (default)
[ 0.886008] pci 0000:02:00.0: Boot video device
[ 0.886105] pcieport-driver 0000:00:02.0: irq 25 for MSI/MSI-X
[ 0.886112] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 0.886203] pcieport-driver 0000:00:09.0: irq 26 for MSI/MSI-X
[ 0.886209] pcieport-driver 0000:00:09.0: setting latency timer to 64
[ 0.886296] pcieport-driver 0000:00:0a.0: irq 27 for MSI/MSI-X
[ 0.886303] pcieport-driver 0000:00:0a.0: setting latency timer to 64
[ 0.886520] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.886573] ACPI: Power Button [PWRF]
[ 0.886654] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.886726] ACPI: Power Button [PWRB]
[ 0.886869] processor ACPI_CPU:00: registered as cooling_device0
[ 0.886904] ACPI: Processor [P001] (supports 8 throttling states)
[ 0.886999] processor ACPI_CPU:01: registered as cooling_device1
[ 0.887067] processor ACPI_CPU:02: registered as cooling_device2
[ 0.887135] processor ACPI_CPU:03: registered as cooling_device3
[ 0.890986] Linux agpgart interface v0.103
[ 0.891109] Driver 'sd' needs updating - please use bus_type methods
[ 0.891192] ahci 0000:00:11.0: version 3.0
[ 0.891204] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.891348] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f
impl SATA mode
[ 0.891402] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio
slum part
[ 0.891917] scsi0 : ahci
[ 0.892050] scsi1 : ahci
[ 0.892140] scsi2 : ahci
[ 0.892229] scsi3 : ahci
[ 0.892316] scsi4 : ahci
[ 0.892406] scsi5 : ahci
[ 0.892531] ata1: SATA max UDMA/133 irq 22, PHY RDY changed
[ 0.892566] ata2: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddff980 irq
22
[ 0.892620] ata3: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffa00 irq
22
[ 0.892674] ata4: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffa80 irq
22
[ 0.892727] ata5: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffb00 irq
22
[ 0.892781] ata6: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffb80 irq
22
[ 0.893026] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.893060] PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp
[ 0.893677] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.893757] mice: PS/2 mouse device common for all mice
[ 0.893879] rtc_cmos 00:02: RTC can wake from S4
[ 0.893944] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.894000] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.894054] md: raid1 personality registered for level 1
[ 0.894088] md: raid6 personality registered for level 6
[ 0.894122] md: raid5 personality registered for level 5
[ 0.894156] md: raid4 personality registered for level 4
[ 0.894258] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
dm-devel@redhat.com
[ 0.894351] cpuidle: using governor ladder
[ 0.894476] usbcore: registered new interface driver hiddev
[ 0.894530] usbcore: registered new interface driver usbhid
[ 0.894563] usbhid: v2.6:USB HID core driver
[ 0.894637] TCP cubic registered
[ 0.894670] NET: Registered protocol family 17
[ 0.894732] powernow-k8: Found 1 AMD Phenom(tm) II X4 955 Processor
processors (4 cpu cores) (version 2.20.00)
[ 0.894809] powernow-k8: 0 : pstate 0 (3200 MHz)
[ 0.894843] powernow-k8: 1 : pstate 1 (2500 MHz)
[ 0.895361] powernow-k8: 2 : pstate 2 (2100 MHz)
[ 0.895395] powernow-k8: 3 : pstate 3 (800 MHz)
[ 0.895799] PM: Resume from disk failed.
[ 0.895891] Magic number: 5:326:444
[ 0.921708] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input2
[ 1.210865] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.210924] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.210981] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.211036] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.211091] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.217322] ata2.00: ATA-7: SAMSUNG HD502IJ, 1AA01110, max UDMA7
[ 1.217368] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.217434] ata4.00: ATA-7: SAMSUNG HD753LJ, 1AA01113, max UDMA7
[ 1.217473] ata4.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.223837] ata2.00: configured for UDMA/133
[ 1.223889] ata4.00: configured for UDMA/133
[ 1.610866] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.617207] ata1.00: ATA-7: SAMSUNG HD502IJ, 1AA01109, max UDMA7
[ 1.617243] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.623662] ata1.00: configured for UDMA/133
[ 1.637999] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0
PQ: 0 ANSI: 5
[ 1.638193] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.638294] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500
GB/465 GiB)
[ 1.638328] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0
PQ: 0 ANSI: 5
[ 1.638411] sd 0:0:0:0: [sda] Write Protect is off
[ 1.638446] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.638456] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.638461] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500
GB/465 GiB)
[ 1.638468] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.638469] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.638478] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.638516] sdb:<5>sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.638614] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0
PQ: 0 ANSI: 5
[ 1.638731] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1.638752] sd 3:0:0:0: [sdc] 1465149168 512-byte hardware sectors: (750
GB/698 GiB)
[ 1.638760] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.638762] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.638770] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.638811] sdc:<6> sda: sdc1 sdc2 sdc3 sdc4 < sdb1 sdb2 sdb3 sdb4 < sda1
sda2 sda3 sda4 < sdb5 sdc5 sda5 sdc6 sdb6 >
[ 1.660703] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.667600] sda6 >
[ 1.667894] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.671362] sdc7 >
[ 1.671684] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.671725] md: Waiting for all devices to be available before autodetect
[ 1.671759] md: If you don't use raid, use raid=noautodetect
[ 1.671861] md: Autodetecting RAID arrays.
[ 1.769826] md: Scanned 12 and added 12 devices.
[ 1.769861] md: autorun ...
[ 1.769894] md: considering sdc6 ...
[ 1.769931] md: adding sdc6 ...
[ 1.769965] md: sdc5 has different UUID to sdc6
[ 1.769999] md: sdc3 has different UUID to sdc6
[ 1.770035] md: sdc1 has different UUID to sdc6
[ 1.770070] md: adding sda6 ...
[ 1.770104] md: sda5 has different UUID to sdc6
[ 1.770138] md: sda3 has different UUID to sdc6
[ 1.770172] md: sda1 has different UUID to sdc6
[ 1.770207] md: adding sdb6 ...
[ 1.770241] md: sdb5 has different UUID to sdc6
[ 1.770275] md: sdb3 has different UUID to sdc6
[ 1.770309] md: sdb1 has different UUID to sdc6
[ 1.770429] md: created md3
[ 1.770462] md: bind<sdb6>
[ 1.770500] md: bind<sda6>
[ 1.770536] md: bind<sdc6>
[ 1.770572] md: running: <sdc6><sda6><sdb6>
[ 1.770708] raid5: device sdc6 operational as raid disk 2
[ 1.770742] raid5: device sda6 operational as raid disk 0
[ 1.770776] raid5: device sdb6 operational as raid disk 1
[ 1.770968] raid5: allocated 3220kB for md3
[ 1.771021] raid5: raid level 5 set md3 active with 3 out of 3 devices,
algorithm 2
[ 1.771071] RAID5 conf printout:
[ 1.771104] --- rd:3 wd:3
[ 1.771137] disk 0, o:1, dev:sda6
[ 1.771170] disk 1, o:1, dev:sdb6
[ 1.771203] disk 2, o:1, dev:sdc6
[ 1.771288] md: considering sdc5 ...
[ 1.771324] md: adding sdc5 ...
[ 1.771358] md: sdc3 has different UUID to sdc5
[ 1.771392] md: sdc1 has different UUID to sdc5
[ 1.771427] md: adding sda5 ...
[ 1.771460] md: sda3 has different UUID to sdc5
[ 1.771494] md: sda1 has different UUID to sdc5
[ 1.771529] md: adding sdb5 ...
[ 1.771563] md: sdb3 has different UUID to sdc5
[ 1.771597] md: sdb1 has different UUID to sdc5
[ 1.771688] md: created md2
[ 1.771721] md: bind<sdb5>
[ 1.771758] md: bind<sda5>
[ 1.771794] md: bind<sdc5>
[ 1.771830] md: running: <sdc5><sda5><sdb5>
[ 1.771964] raid5: device sdc5 operational as raid disk 2
[ 1.771998] raid5: device sda5 operational as raid disk 0
[ 1.772031] raid5: device sdb5 operational as raid disk 1
[ 1.772220] raid5: allocated 3220kB for md2
[ 1.772266] raid5: raid level 5 set md2 active with 3 out of 3 devices,
algorithm 2
[ 1.772318] RAID5 conf printout:
[ 1.772351] --- rd:3 wd:3
[ 1.772384] disk 0, o:1, dev:sda5
[ 1.772417] disk 1, o:1, dev:sdb5
[ 1.772450] disk 2, o:1, dev:sdc5
[ 1.772520] md: considering sdc3 ...
[ 1.772556] md: adding sdc3 ...
[ 1.772590] md: sdc1 has different UUID to sdc3
[ 1.772624] md: adding sda3 ...
[ 1.772658] md: sda1 has different UUID to sdc3
[ 1.772693] md: adding sdb3 ...
[ 1.772727] md: sdb1 has different UUID to sdc3
[ 1.772819] md: created md1
[ 1.772852] md: bind<sdb3>
[ 1.772888] md: bind<sda3>
[ 1.772924] md: bind<sdc3>
[ 1.772960] md: running: <sdc3><sda3><sdb3>
[ 1.773090] raid5: device sdc3 operational as raid disk 2
[ 1.773124] raid5: device sda3 operational as raid disk 0
[ 1.773157] raid5: device sdb3 operational as raid disk 1
[ 1.773353] raid5: allocated 3220kB for md1
[ 1.773403] raid5: raid level 5 set md1 active with 3 out of 3 devices,
algorithm 2
[ 1.773452] RAID5 conf printout:
[ 1.773485] --- rd:3 wd:3
[ 1.773518] disk 0, o:1, dev:sda3
[ 1.773551] disk 1, o:1, dev:sdb3
[ 1.773584] disk 2, o:1, dev:sdc3
[ 1.773660] md: considering sdc1 ...
[ 1.773695] md: adding sdc1 ...
[ 1.773730] md: adding sda1 ...
[ 1.773764] md: adding sdb1 ...
[ 1.773797] md: created md0
[ 1.773829] md: bind<sdb1>
[ 1.773866] md: bind<sda1>
[ 1.773902] md: bind<sdc1>
[ 1.773938] md: running: <sdc1><sda1><sdb1>
[ 1.774092] raid1: raid set md0 active with 3 out of 3 mirrors
[ 1.774152] md: ... autorun DONE.
[ 1.774200] md: Loading md3: /dev/sda3
[ 1.774239] md3: unknown partition table
[ 1.774396] md: couldn't update array info. -22
[ 1.774433] md: could not bd_claim sda3.
[ 1.774467] md: md_import_device returned -16
[ 1.774502] md: could not bd_claim sdb3.
[ 1.774535] md: md_import_device returned -16
[ 1.774570] md: could not bd_claim sdc3.
[ 1.774617] md: md_import_device returned -16
[ 1.774651] md: starting md3 failed
[ 1.774725] md1: unknown partition table
[ 1.821104] reiser4: md1: found disk format 4.0.0.
[ 5.827803] VFS: Mounted root (reiser4 filesystem) readonly on device 9:1.
[ 5.827853] Freeing unused kernel memory: 348k freed
[ 8.934542] udev: starting version 145
[ 9.053004] md0:<6> md2: unknown partition table
[ 9.113192] unknown partition table
[ 10.041736] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 10.041750] r8169 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.041762] r8169 0000:01:00.0: setting latency timer to 64
[ 10.042017] r8169 0000:01:00.0: irq 28 for MSI/MSI-X
[ 10.042095] eth0: RTL8168c/8111c at 0xffffc20012efa000, 00:19:66:86:ce:12,
XID 3c4000c0 IRQ 28
[ 10.070654] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 10.070677] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 10.070710] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 10.070949] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus
number 1
[ 10.070973] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze
workaround
[ 10.070989] ehci_hcd 0000:00:12.2: debug port 1
[ 10.071005] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfddff000
[ 10.081262] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 10.081288] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.081290] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 10.081291] usb usb1: Product: EHCI Host Controller
[ 10.081292] usb usb1: Manufacturer: Linux 2.6.30.5r4 ehci_hcd
[ 10.081294] usb usb1: SerialNumber: 0000:00:12.2
[ 10.081640] usb usb1: configuration #1 chosen from 1 choice
[ 10.081682] hub 1-0:1.0: USB hub found
[ 10.081687] hub 1-0:1.0: 6 ports detected
[ 10.081811] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ
19
[ 10.081826] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 10.081990] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus
number 2
[ 10.082007] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze
workaround
[ 10.082023] ehci_hcd 0000:00:13.2: debug port 1
[ 10.082036] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfddf6800
[ 10.091264] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 10.091276] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.091277] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 10.091279] usb usb2: Product: EHCI Host Controller
[ 10.091280] usb usb2: Manufacturer: Linux 2.6.30.5r4 ehci_hcd
[ 10.091281] usb usb2: SerialNumber: 0000:00:13.2
[ 10.091348] usb usb2: configuration #1 chosen from 1 choice
[ 10.091377] hub 2-0:1.0: USB hub found
[ 10.091381] hub 2-0:1.0: 6 ports detected
[ 10.120081] Linux video capture interface: v2.00
[ 10.128288] bttv: driver version 0.9.18 loaded
[ 10.128290] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 10.128348] bttv: Bt8xx card found (0).
[ 10.128359] bttv 0000:05:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 10.128369] bttv0: Bt848 (rev 18) at 0000:05:06.0, irq: 21, latency: 128,
mmio: 0xfcfff000
[ 10.128411] bttv0: using: Terratec TerraTV+ Version 1.0 (Bt848)/ Terra
TValue Version 1.0/ Vobis TV-Boostar [card=25,insmod option]
[ 10.128413] IRQ 21/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs
[ 10.128447] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
[ 10.387101] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 10.512120] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
[ 10.512122] usb 1-2: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 10.512124] usb 1-2: Product: USB2.0 Hub
[ 10.512170] usb 1-2: configuration #1 chosen from 1 choice
[ 10.512613] hub 1-2:1.0: USB hub found
[ 10.512866] hub 1-2:1.0: 4 ports detected
[ 10.781873] usb 1-2.2: new low speed USB device using ehci_hcd and address
3
[ 10.871357] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c518
[ 10.871358] usb 1-2.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 10.871360] usb 1-2.2: Product: USB Receiver
[ 10.871361] usb 1-2.2: Manufacturer: Logitech
[ 10.871391] usb 1-2.2: configuration #1 chosen from 1 choice
[ 10.881593] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.0/input/input3
[ 10.881630] generic-usb 0003:046D:C518.0001: input,hidraw0: USB HID v1.11
Mouse [Logitech USB Receiver] on usb-0000:00:12.2-2.2/input0
[ 10.887013] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.1/input/input4
[ 10.887061] generic-usb 0003:046D:C518.0002: input,hiddev96,hidraw1: USB
HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-2.2/input1
[ 11.130018] bttv0: tea5757: read timeout
[ 11.130020] bttv0: tuner type=5
[ 11.148620] All bytes are equal. It is not a TEA5767
[ 11.148649] tuner 0-0060: chip found @ 0xc0 (bt848 #0 [sw])
[ 11.151481] tuner-simple 0-0060: creating new instance
[ 11.151484] tuner-simple 0-0060: type set to 5 (Philips PAL_BG (FI1216 and
compatibles))
[ 11.163632] bttv0: audio absent, no audio device found!
[ 11.163694] bttv0: registered device video0
[ 11.163721] bttv0: registered device vbi0
[ 11.491112] reiser4: md2: found disk format 4.0.0.
[ 13.287507] reiser4: md3: found disk format 4.0.0.
[ 54.579781] reiser4: sdc7: found disk format 4.0.0.
[ 66.925455] Adding 7815612k swap on /dev/sda2. Priority:1 extents:1
across:7815612k
[ 66.968051] Adding 7815612k swap on /dev/sdb2. Priority:1 extents:1
across:7815612k
[ 67.009103] Adding 7815612k swap on /dev/sdc2. Priority:1 extents:1
across:7815612k
[ 67.688099] w83627ehf: Found W83627EHG chip at 0x290
[ 68.078974] r8169: eth0: link up
[ 68.078984] r8169: eth0: link up
[ 70.853121] EMU10K1_Audigy 0000:05:08.0: PCI INT A -> GSI 23 (level, low) -
> IRQ 23
[ 70.860129] Audigy2 value: Special config.
[ 72.279621] fglrx: module license 'Proprietary. (C) 2002 - ATI
Technologies, Starnberg, GERMANY' taints kernel.
[ 72.279629] Disabling lock debugging due to kernel taint
[ 72.328125] [fglrx] Maximum main memory to use for locked dma buffers: 7749
MBytes.
[ 72.328388] [fglrx] vendor: 1002 device: 9501 count: 1
[ 72.329030] [fglrx] ioport: bar 4, base 0xc000, size: 0x100
[ 72.329052] pci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 72.329061] pci 0000:02:00.0: setting latency timer to 64
[ 72.329531] [fglrx] Kernel PAT support is enabled
[ 72.329567] [fglrx] module loaded - fglrx 8.66.2 [Aug 25 2009] with 1
minors
[ 72.502484] fglrx_pci 0000:02:00.0: irq 29 for MSI/MSI-X
[ 72.502838] [fglrx] Firegl kernel thread PID: 3735
[ 74.588819] [fglrx] Gart USWC size:1279 M.
[ 74.588822] [fglrx] Gart cacheable size:508 M.
[ 74.588826] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 74.588827] [fglrx] Reserved FB block: Unshared offset:fbff000, size:401000
[ 74.588829] [fglrx] Reserved FB block: Unshared offset:1fffc000, size:4000
[ 132.415785] reiser4[kmail(3916)]: disable_write_barrier
(fs/reiser4/wander.c:235)[zam-1055]:
[ 132.415790] NOTICE: md3 does not support write barriers, using synchronous
write instead.
same result.
Glück Auf,
Volker
ps.
putting back the scsi card would be difficult - so if it is not really needed I
would prefer to skip that step.
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: amd64 + mtrr: only 3.1gb of 8gb are covered, kernel 2.6.30 and earlier.
2009-08-27 7:13 ` Yinghai Lu
2009-08-27 16:28 ` Volker Armin Hemmann
@ 2009-09-19 20:11 ` Volker Armin Hemmann
2009-09-20 6:03 ` Yinghai Lu
1 sibling, 1 reply; 15+ messages in thread
From: Volker Armin Hemmann @ 2009-09-19 20:11 UTC (permalink / raw)
To: Yinghai Lu; +Cc: linux-kernel
Hi,
just want to say:
no change with 2.6.31.
[ 0.000000] Linux version 2.6.31r4 (root@energy) (gcc version 4.4.1 (Gentoo
4.4.1 p1.0) ) #9 SMP Wed Sep 16 15:10:44 CEST 2009
[ 0.000000] Command line: root=/dev/md1 md=3,/dev/sda3,/dev/sdb3,/dev/sdc3
nmi_watchdog=0 mtrr_spare_reg_nr=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] AMD AuthenticAMD
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7eb0000 (usable)
[ 0.000000] BIOS-e820: 00000000c7eb0000 - 00000000c7ec0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000c7ec0000 - 00000000c7ef0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000c7ef0000 - 00000000c7f00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000238000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable)
==> (reserved)
[ 0.000000] last_pfn = 0x238000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF8000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000238000000 aka 9088M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] e820 update range: 00000000c8000000 - 0000000100000000 (usable)
==> (reserved)
[ 0.000000] last_pfn = 0xc7eb0 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000c7eb0000 (usable)
[ 0.000000] modified: 00000000c7eb0000 - 00000000c7ec0000 (ACPI data)
[ 0.000000] modified: 00000000c7ec0000 - 00000000c7ef0000 (ACPI NVS)
[ 0.000000] modified: 00000000c7ef0000 - 00000000c7f00000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000238000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000c7eb0000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00c7e00000 page 2M
[ 0.000000] 00c7e00000 - 00c7eb0000 page 4k
[ 0.000000] kernel direct mapping tables up to c7eb0000 @ 10000-13000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000238000000
[ 0.000000] 0100000000 - 0200000000 page 1G
[ 0.000000] 0200000000 - 0238000000 page 2M
[ 0.000000] kernel direct mapping tables up to 238000000 @ 12000-14000
[ 0.000000] ACPI: RSDP 00000000000fa7c0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000c7eb0000 00040 (v01 050609 RSDT2000 20090506
MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000c7eb0200 00084 (v02 A M I OEMFACP 12000601
MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000c7eb0440 08512 (v01 AS140 AS140121 00000121
INTL 20051117)
[ 0.000000] ACPI: FACS 00000000c7ec0000 00040
[ 0.000000] ACPI: APIC 00000000c7eb0390 0006C (v01 050609 APIC2000 20090506
MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000c7eb0400 0003C (v01 050609 OEMMCFG 20090506
MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000c7ec0040 00071 (v01 050609 OEMB2000 20090506
MSFT 00000097)
[ 0.000000] ACPI: AAFT 00000000c7eb8960 00027 (v01 050609 OEMAAFT 20090506
MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000c7eb8990 00038 (v01 050609 OEMHPET 20090506
MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000c7eb89d0 0088C (v01 A M I POWERNOW 00000001
AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0238000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000
- 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000
- 0000008000]
[ 0.000000] #2 [0001000000 - 00015f68c0] TEXT DATA BSS ==> [0001000000
- 00015f68c0]
[ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00
- 0000100000]
[ 0.000000] #4 [00015f7000 - 00015f7133] BRK ==> [00015f7000
- 00015f7133]
[ 0.000000] #5 [0000010000 - 0000012000] PGTABLE ==> [0000010000
- 0000012000]
[ 0.000000] #6 [0000012000 - 0000013000] PGTABLE ==> [0000012000
- 0000013000]
[ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880028600000-
ffff88002f7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00238000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000c7eb0
[ 0.000000] 0: 0x00100000 -> 0x00238000
[ 0.000000] On node 0 totalpages: 2096703
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 102 pages reserved
[ 0.000000] DMA zone: 3825 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 800488 pages, LIFO batch:31
[ 0.000000] Normal zone: 17472 pages used for memmap
[ 0.000000] Normal zone: 1260480 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e6000
[ 0.000000] PM: Registered nosave memory: 00000000000e6000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000c7eb0000 -
00000000c7ec0000
[ 0.000000] PM: Registered nosave memory: 00000000c7ec0000 -
00000000c7ef0000
[ 0.000000] PM: Registered nosave memory: 00000000c7ef0000 -
00000000c7f00000
[ 0.000000] PM: Registered nosave memory: 00000000c7f00000 -
00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at c7f00000 (gap:
c7f00000:38000000)
[ 0.000000] NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 25 pages at ffff880028034000, static data 71904
bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 2064793
[ 0.000000] Kernel command line: root=/dev/md1
md=3,/dev/sda3,/dev/sdb3,/dev/sdc3 nmi_watchdog=0 mtrr_spare_reg_nr=1
[ 0.000000] md: Will configure md3 (super-block) from
/dev/sda3,/dev/sdb3,/dev/sdc3, below.
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608
bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 200000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 -
0000000024000000
[ 0.000000] Memory: 8184476k/9306112k available (3489k kernel code, 919300k
absent, 201360k reserved, 1745k data, 376k init)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4,
Nodes=1
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3200.248 MHz processor.
[ 0.000613] Console: colour VGA+ 80x25
[ 0.000615] console [tty0] enabled
[ 0.003333] hpet clockevent registered
[ 0.003333] alloc irq_desc for 24 on node 0
[ 0.003333] alloc kstat_irqs on node 0
[ 0.003333] HPET: 4 timers in total, 1 timers will be used for per-cpu
timer
[ 0.003338] Calibrating delay loop (skipped), value calculated using timer
frequency.. 6403.17 BogoMIPS (lpj=10667480)
[ 0.003420] Mount-cache hash table entries: 256
[ 0.003542] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.003577] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003612] tseg: 0000000000
[ 0.003617] CPU: Physical Processor ID: 0
[ 0.003651] CPU: Processor Core ID: 0
[ 0.003685] mce: CPU supports 6 MCE banks
[ 0.003725] using C1E aware idle routine
[ 0.003769] ACPI: Core revision 20090521
[ 0.016708] Setting APIC routing to flat
[ 0.017031] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.050991] CPU0: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.053332] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.003333] Initializing CPU#1
[ 0.003333] Calibrating delay using timer specific routine.. 6402.86
BogoMIPS (lpj=10666976)
[ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.003333] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 1
[ 0.003333] mce: CPU supports 6 MCE banks
[ 0.003333] x86 PAT enabled: cpu 1, old 0x7040600070406, new
0x7010600070106
[ 0.144164] CPU1: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.144513] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.146698] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.003333] Initializing CPU#2
[ 0.003333] Calibrating delay using timer specific routine.. 6402.85
BogoMIPS (lpj=10666966)
[ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.003333] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 2
[ 0.003333] mce: CPU supports 6 MCE banks
[ 0.003333] x86 PAT enabled: cpu 2, old 0x7040600070406, new
0x7010600070106
[ 0.240840] CPU2: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.241187] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.243371] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.003333] Initializing CPU#3
[ 0.003333] Calibrating delay using timer specific routine.. 6402.85
BogoMIPS (lpj=10666969)
[ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.003333] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 3
[ 0.003333] mce: CPU supports 6 MCE banks
[ 0.003333] x86 PAT enabled: cpu 3, old 0x7040600070406, new
0x7010600070106
[ 0.337520] CPU3: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.337868] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.340008] Brought up 4 CPUs
[ 0.340042] Total of 4 processors activated (25611.74 BogoMIPS).
[ 0.340111] CPU0 attaching sched-domain:
[ 0.340112] domain 0: span 0-3 level MC
[ 0.340114] groups: 0 1 2 3
[ 0.340117] CPU1 attaching sched-domain:
[ 0.340118] domain 0: span 0-3 level MC
[ 0.340119] groups: 1 2 3 0
[ 0.340122] CPU2 attaching sched-domain:
[ 0.340123] domain 0: span 0-3 level MC
[ 0.340124] groups: 2 3 0 1
[ 0.340126] CPU3 attaching sched-domain:
[ 0.340127] domain 0: span 0-3 level MC
[ 0.340128] groups: 3 0 1 2
[ 0.340392] xor: automatically using best checksumming function:
generic_sse
[ 0.356667] generic_sse: 12835.200 MB/sec
[ 0.356701] xor: using function: generic_sse (12835.200 MB/sec)
[ 0.356754] Time: 10:44:48 Date: 09/18/09
[ 0.356803] NET: Registered protocol family 16
[ 0.357121] node 0 link 0: io port [1000, ffffff]
[ 0.357123] TOM: 00000000c8000000 aka 3200M
[ 0.357157] Fam 10h mmconf [e0000000, efffffff]
[ 0.357159] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.357161] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.357163] node 0 link 0: mmio [a0000, bffff]
[ 0.357165] node 0 link 0: mmio [c8000000, dfffffff]
[ 0.357166] TOM2: 0000000238000000 aka 9088M
[ 0.357200] bus: [00,07] on node 0 link 0
[ 0.357201] bus: 00 index 0 io port: [0, ffff]
[ 0.357203] bus: 00 index 1 mmio: [f0000000, ffffffff]
[ 0.357204] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.357205] bus: 00 index 3 mmio: [c8000000, dfffffff]
[ 0.357206] bus: 00 index 4 mmio: [238000000, fcffffffff]
[ 0.357219] ACPI: bus type pci registered
[ 0.357325] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.357360] PCI: Not using MMCONFIG.
[ 0.357394] PCI: Using configuration type 1 for base access
[ 0.357428] PCI: Using configuration type 1 for extended access
[ 0.359473] bio: create slab <bio-0> at 0
[ 0.359916] ACPI: EC: Look up EC in DSDT
[ 0.367314] ACPI: Interpreter enabled
[ 0.367350] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.367940] ACPI: Using IOAPIC for interrupt routing
[ 0.368011] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.370718] PCI: MCFG area at e0000000 reserved in ACPI motherboard
resources
[ 0.375825] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.381085] ACPI: No dock devices found.
[ 0.381379] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.381460] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
[ 0.381506] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.381541] pci 0000:00:02.0: PME# disabled
[ 0.381609] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.381644] pci 0000:00:09.0: PME# disabled
[ 0.381704] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.381739] pci 0000:00:0a.0: PME# disabled
[ 0.381818] pci 0000:00:11.0: reg 10 io port: [0xa000-0xa007]
[ 0.381824] pci 0000:00:11.0: reg 14 io port: [0x9000-0x9003]
[ 0.381830] pci 0000:00:11.0: reg 18 io port: [0x8000-0x8007]
[ 0.381836] pci 0000:00:11.0: reg 1c io port: [0x7000-0x7003]
[ 0.381842] pci 0000:00:11.0: reg 20 io port: [0x6000-0x600f]
[ 0.381848] pci 0000:00:11.0: reg 24 32bit mmio: [0xfddff800-0xfddffbff]
[ 0.381897] pci 0000:00:12.0: reg 10 32bit mmio: [0xfddfe000-0xfddfefff]
[ 0.381948] pci 0000:00:12.1: reg 10 32bit mmio: [0xfddfd000-0xfddfdfff]
[ 0.382016] pci 0000:00:12.2: reg 10 32bit mmio: [0xfddff000-0xfddff0ff]
[ 0.382065] pci 0000:00:12.2: supports D1 D2
[ 0.382067] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.382103] pci 0000:00:12.2: PME# disabled
[ 0.382165] pci 0000:00:13.0: reg 10 32bit mmio: [0xfddfc000-0xfddfcfff]
[ 0.382216] pci 0000:00:13.1: reg 10 32bit mmio: [0xfddf7000-0xfddf7fff]
[ 0.382284] pci 0000:00:13.2: reg 10 32bit mmio: [0xfddf6800-0xfddf68ff]
[ 0.382334] pci 0000:00:13.2: supports D1 D2
[ 0.382335] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.382371] pci 0000:00:13.2: PME# disabled
[ 0.382514] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[ 0.382519] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[ 0.382525] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.382531] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.382536] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
[ 0.382660] pci 0000:00:14.5: reg 10 32bit mmio: [0xfddf5000-0xfddf5fff]
[ 0.382794] pci 0000:02:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.382801] pci 0000:02:00.0: reg 18 64bit mmio: [0xfdff0000-0xfdffffff]
[ 0.382806] pci 0000:02:00.0: reg 20 io port: [0xc000-0xc0ff]
[ 0.382813] pci 0000:02:00.0: reg 30 32bit mmio: [0xfdfc0000-0xfdfdffff]
[ 0.382829] pci 0000:02:00.0: supports D1 D2
[ 0.382857] pci 0000:02:00.1: reg 10 64bit mmio: [0xfdfec000-0xfdfeffff]
[ 0.382887] pci 0000:02:00.1: supports D1 D2
[ 0.382937] pci 0000:00:02.0: bridge io port: [0xc000-0xcfff]
[ 0.382939] pci 0000:00:02.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
[ 0.382943] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.382985] pci 0000:00:09.0: bridge io port: [0xd000-0xdfff]
[ 0.382987] pci 0000:00:09.0: bridge 32bit mmio: [0xfe000000-0xfebfffff]
[ 0.382990] pci 0000:00:09.0: bridge 64bit mmio pref: [0xfa000000-0xfcefffff]
[ 0.383021] pci 0000:01:00.0: reg 10 io port: [0xb800-0xb8ff]
[ 0.383034] pci 0000:01:00.0: reg 18 64bit mmio: [0xcffff000-0xcfffffff]
[ 0.383044] pci 0000:01:00.0: reg 20 64bit mmio: [0xcffe0000-0xcffeffff]
[ 0.383049] pci 0000:01:00.0: reg 30 32bit mmio: [0xfdef0000-0xfdefffff]
[ 0.383076] pci 0000:01:00.0: supports D1 D2
[ 0.383077] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.383114] pci 0000:01:00.0: PME# disabled
[ 0.383200] pci 0000:00:0a.0: bridge io port: [0xb000-0xbfff]
[ 0.383202] pci 0000:00:0a.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.383205] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xcff00000-0xcfffffff]
[ 0.383240] pci 0000:05:06.0: reg 10 32bit mmio: [0xfcfff000-0xfcffffff]
[ 0.383319] pci 0000:05:08.0: reg 10 io port: [0xe800-0xe83f]
[ 0.383389] pci 0000:05:08.0: supports D1 D2
[ 0.383430] pci 0000:00:14.4: transparent bridge
[ 0.383467] pci 0000:00:14.4: bridge io port: [0xe000-0xefff]
[ 0.383473] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfcf00000-0xfcffffff]
[ 0.383485] pci_bus 0000:00: on NUMA node 0
[ 0.383488] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.383621] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.383666] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.383711] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.383777] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 0.386697] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
[ 0.386926] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
[ 0.387154] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[ 0.387381] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[ 0.387608] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0,
disabled.
[ 0.387881] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 12 14 15)
[ 0.388107] ACPI: PCI Interrupt Link [LNKG] (IRQs *4 10 11 12 14 15)
[ 0.388320] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 12 14 15)
[ 0.388679] SCSI subsystem initialized
[ 0.388772] libata version 3.00 loaded.
[ 0.388832] usbcore: registered new interface driver usbfs
[ 0.388888] usbcore: registered new interface driver hub
[ 0.388953] usbcore: registered new device driver usb
[ 0.443342] raid6: int64x1 2760 MB/s
[ 0.500009] raid6: int64x2 3863 MB/s
[ 0.556675] raid6: int64x4 2862 MB/s
[ 0.613335] raid6: int64x8 2538 MB/s
[ 0.670015] raid6: sse2x1 4072 MB/s
[ 0.726676] raid6: sse2x2 6741 MB/s
[ 0.783334] raid6: sse2x4 7986 MB/s
[ 0.783368] raid6: using algorithm sse2x4 (7986 MB/s)
[ 0.783454] PCI: Using ACPI for IRQ routing
[ 0.783492] pci 0000:00:00.0: BAR 3: address space collision on of device
[0xe0000000-0xffffffff]
[ 0.783546] pci 0000:00:00.0: BAR 3: can't allocate resource
[ 0.796894] PCI-DMA: Disabling AGP.
[ 0.797013] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.797048] PCI-DMA: using GART IOMMU.
[ 0.797082] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.798879] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0
[ 0.798988] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.803361] hpet: hpet2 irq 24 for MSI
[ 0.813349] Switched to high resolution mode on CPU 0
[ 0.814536] Switched to high resolution mode on CPU 1
[ 0.814545] Switched to high resolution mode on CPU 2
[ 0.814560] Switched to high resolution mode on CPU 3
[ 0.823365] pnp: PnP ACPI init
[ 0.823416] ACPI: bus type pnp registered
[ 0.825645] pnp 00:0b: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3
(0x0-0x1fffffff), disabling
[ 0.825701] pnp 00:0b: mem resource (0xc0000-0xcffff) overlaps 0000:00:00.0
BAR 3 (0x0-0x1fffffff), disabling
[ 0.825755] pnp 00:0b: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0
BAR 3 (0x0-0x1fffffff), disabling
[ 0.825810] pnp 00:0b: mem resource (0x100000-0xc7efffff) overlaps
0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.826118] pnp: PnP ACPI: found 12 devices
[ 0.826152] ACPI: ACPI bus type pnp unregistered
[ 0.826192] system 00:06: iomem range 0xfec00000-0xfec00fff could not be
reserved
[ 0.826246] system 00:06: iomem range 0xfee00000-0xfee00fff has been
reserved
[ 0.826283] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.826318] system 00:07: ioport range 0x40b-0x40b has been reserved
[ 0.826353] system 00:07: ioport range 0x4d6-0x4d6 has been reserved
[ 0.826388] system 00:07: ioport range 0xc00-0xc01 has been reserved
[ 0.826423] system 00:07: ioport range 0xc14-0xc14 has been reserved
[ 0.826458] system 00:07: ioport range 0xc50-0xc51 has been reserved
[ 0.826492] system 00:07: ioport range 0xc52-0xc52 has been reserved
[ 0.826527] system 00:07: ioport range 0xc6c-0xc6c has been reserved
[ 0.826562] system 00:07: ioport range 0xc6f-0xc6f has been reserved
[ 0.826597] system 00:07: ioport range 0xcd0-0xcd1 has been reserved
[ 0.826632] system 00:07: ioport range 0xcd2-0xcd3 has been reserved
[ 0.826683] system 00:07: ioport range 0xcd4-0xcd5 has been reserved
[ 0.826718] system 00:07: ioport range 0xcd6-0xcd7 has been reserved
[ 0.826753] system 00:07: ioport range 0xcd8-0xcdf has been reserved
[ 0.826787] system 00:07: ioport range 0x800-0x89f has been reserved
[ 0.826822] system 00:07: ioport range 0xb00-0xb0f has been reserved
[ 0.826857] system 00:07: ioport range 0xb20-0xb3f has been reserved
[ 0.826892] system 00:07: ioport range 0x900-0x90f has been reserved
[ 0.826927] system 00:07: ioport range 0x910-0x91f has been reserved
[ 0.826962] system 00:07: ioport range 0xfe00-0xfefe has been reserved
[ 0.826997] system 00:07: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.827033] system 00:07: iomem range 0xfec10000-0xfec1001f has been
reserved
[ 0.827069] system 00:09: ioport range 0x290-0x29f has been reserved
[ 0.827105] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.827142] system 00:0b: iomem range 0xfec00000-0xffffffff could not be
reserved
[ 0.832030] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
[ 0.832065] pci 0000:00:02.0: IO window: 0xc000-0xcfff
[ 0.832101] pci 0000:00:02.0: MEM window: 0xfdf00000-0xfdffffff
[ 0.832136] pci 0000:00:02.0: PREFETCH window:
0x000000d0000000-0x000000dfffffff
[ 0.832191] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03
[ 0.832226] pci 0000:00:09.0: IO window: 0xd000-0xdfff
[ 0.832262] pci 0000:00:09.0: MEM window: 0xfe000000-0xfebfffff
[ 0.832297] pci 0000:00:09.0: PREFETCH window:
0x000000fa000000-0x000000fcefffff
[ 0.832352] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:01
[ 0.832386] pci 0000:00:0a.0: IO window: 0xb000-0xbfff
[ 0.832422] pci 0000:00:0a.0: MEM window: 0xfde00000-0xfdefffff
[ 0.832457] pci 0000:00:0a.0: PREFETCH window:
0x000000cff00000-0x000000cfffffff
[ 0.832512] pci 0000:00:14.4: PCI bridge, secondary bus 0000:05
[ 0.832548] pci 0000:00:14.4: IO window: 0xe000-0xefff
[ 0.832585] pci 0000:00:14.4: MEM window: disabled
[ 0.832621] pci 0000:00:14.4: PREFETCH window: 0xfcf00000-0xfcffffff
[ 0.832662] alloc irq_desc for 18 on node -1
[ 0.832664] alloc kstat_irqs on node -1
[ 0.832667] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.832704] pci 0000:00:02.0: setting latency timer to 64
[ 0.832707] alloc irq_desc for 17 on node -1
[ 0.832708] alloc kstat_irqs on node -1
[ 0.832710] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.832746] pci 0000:00:09.0: setting latency timer to 64
[ 0.832749] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.832784] pci 0000:00:0a.0: setting latency timer to 64
[ 0.832791] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.832793] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.832794] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
[ 0.832796] pci_bus 0000:02: resource 1 mem: [0xfdf00000-0xfdffffff]
[ 0.832797] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.832799] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 0.832800] pci_bus 0000:03: resource 1 mem: [0xfe000000-0xfebfffff]
[ 0.832801] pci_bus 0000:03: resource 2 pref mem [0xfa000000-0xfcefffff]
[ 0.832803] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
[ 0.832804] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.832805] pci_bus 0000:01: resource 2 pref mem [0xcff00000-0xcfffffff]
[ 0.832807] pci_bus 0000:05: resource 0 io: [0xe000-0xefff]
[ 0.832808] pci_bus 0000:05: resource 2 pref mem [0xfcf00000-0xfcffffff]
[ 0.832810] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.832811] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.832821] NET: Registered protocol family 2
[ 0.832877] IP route cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.833358] TCP established hash table entries: 262144 (order: 10, 4194304
bytes)
[ 0.834343] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.834743] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.834779] TCP reno registered
[ 0.834857] NET: Registered protocol family 1
[ 0.836019] Scanning for low memory corruption every 60 seconds
[ 0.836741] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.836874] Loading Reiser4. See www.namesys.com for a description of
Reiser4.
[ 0.836960] msgmni has been set to 15987
[ 0.837274] alg: No test for stdrng (krng)
[ 0.837317] async_tx: api initialized (sync-only)
[ 0.837391] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 0.837445] io scheduler noop registered
[ 0.837480] io scheduler cfq registered (default)
[ 0.837602] pci 0000:02:00.0: Boot video device
[ 0.837694] alloc irq_desc for 25 on node -1
[ 0.837695] alloc kstat_irqs on node -1
[ 0.837701] pcieport-driver 0000:00:02.0: irq 25 for MSI/MSI-X
[ 0.837705] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 0.837795] alloc irq_desc for 26 on node -1
[ 0.837796] alloc kstat_irqs on node -1
[ 0.837799] pcieport-driver 0000:00:09.0: irq 26 for MSI/MSI-X
[ 0.837803] pcieport-driver 0000:00:09.0: setting latency timer to 64
[ 0.837891] alloc irq_desc for 27 on node -1
[ 0.837892] alloc kstat_irqs on node -1
[ 0.837895] pcieport-driver 0000:00:0a.0: irq 27 for MSI/MSI-X
[ 0.837899] pcieport-driver 0000:00:0a.0: setting latency timer to 64
[ 0.838094] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.838148] ACPI: Power Button [PWRF]
[ 0.838239] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.838292] ACPI: Power Button [PWRB]
[ 0.838444] processor LNXCPU:00: registered as cooling_device0
[ 0.838479] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.838576] processor LNXCPU:01: registered as cooling_device1
[ 0.838646] processor LNXCPU:02: registered as cooling_device2
[ 0.838718] processor LNXCPU:03: registered as cooling_device3
[ 0.842368] Linux agpgart interface v0.103
[ 0.842561] ahci 0000:00:11.0: version 3.0
[ 0.842570] alloc irq_desc for 22 on node -1
[ 0.842571] alloc kstat_irqs on node -1
[ 0.842575] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.842723] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f
impl SATA mode
[ 0.842778] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio
slum part
[ 0.843318] scsi0 : ahci
[ 0.843461] scsi1 : ahci
[ 0.843559] scsi2 : ahci
[ 0.843654] scsi3 : ahci
[ 0.843748] scsi4 : ahci
[ 0.843845] scsi5 : ahci
[ 0.843973] ata1: SATA max UDMA/133 irq_stat 0x00400000 irq 22, PHY RDY
changed
[ 0.844028] ata2: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddff980 irq
22
[ 0.844082] ata3: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffa00 irq
22
[ 0.844137] ata4: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffa80 irq
22
[ 0.844191] ata5: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffb00 irq
22
[ 0.844245] ata6: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffb80 irq
22
[ 0.844491] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.844526] PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp
[ 0.845071] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.845197] mice: PS/2 mouse device common for all mice
[ 0.845347] rtc_cmos 00:02: RTC can wake from S4
[ 0.845413] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.845469] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.845523] md: raid1 personality registered for level 1
[ 0.845558] md: raid6 personality registered for level 6
[ 0.845592] md: raid5 personality registered for level 5
[ 0.845626] md: raid4 personality registered for level 4
[ 0.846205] cpuidle: using governor ladder
[ 0.846648] usbcore: registered new interface driver hiddev
[ 0.846718] usbcore: registered new interface driver usbhid
[ 0.846753] usbhid: v2.6:USB HID core driver
[ 0.846813] Advanced Linux Sound Architecture Driver Version 1.0.20.
[ 0.846847] ALSA device list:
[ 0.846880] No soundcards found.
[ 0.846948] TCP cubic registered
[ 0.846987] NET: Registered protocol family 10
[ 0.847118] IPv6 over IPv4 tunneling driver
[ 0.847252] NET: Registered protocol family 17
[ 0.847307] powernow-k8: Found 1 AMD Phenom(tm) II X4 955 Processor
processors (4 cpu cores) (version 2.20.00)
[ 0.847386] powernow-k8: 0 : pstate 0 (3200 MHz)
[ 0.847420] powernow-k8: 1 : pstate 1 (2500 MHz)
[ 0.847454] powernow-k8: 2 : pstate 2 (2100 MHz)
[ 0.847488] powernow-k8: 3 : pstate 3 (800 MHz)
[ 0.847871] PM: Resume from disk failed.
[ 0.847960] Magic number: 9:115:730
[ 0.874152] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input2
[ 1.163786] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.163845] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.163902] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.163955] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.164197] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.170136] ata4.00: ATA-7: SAMSUNG HD753LJ, 1AA01113, max UDMA7
[ 1.170177] ata4.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.170247] ata2.00: ATA-7: SAMSUNG HD502IJ, 1AA01110, max UDMA7
[ 1.170286] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.176655] ata4.00: configured for UDMA/133
[ 1.176712] ata2.00: configured for UDMA/133
[ 1.563785] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.570130] ata1.00: ATA-7: SAMSUNG HD502IJ, 1AA01109, max UDMA7
[ 1.570166] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.576582] ata1.00: configured for UDMA/133
[ 1.587994] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0
PQ: 0 ANSI: 5
[ 1.588218] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500
GB/465 GiB)
[ 1.588234] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.588326] sd 0:0:0:0: [sda] Write Protect is off
[ 1.588331] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0
PQ: 0 ANSI: 5
[ 1.588414] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.588425] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.588446] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500
GB/465 GiB)
[ 1.588464] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.588466] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.588475] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.588498] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.588541] sdb:
[ 1.588565] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0
PQ: 0 ANSI: 5
[ 1.588659] sd 3:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750
GB/698 GiB)
[ 1.588675] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.588676] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.588684] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.588703] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1.588728] sdc:
[ 1.588982] sda: sdb1 sdb2 sdb3 sdb4 < sdc1 sdc2 sdc3 sdc4 < sda1 sda2
sda3 sda4 < sdb5 sdc5 sda5 sdc6 sdb6 >
[ 1.611001] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.617040] sda6 >
[ 1.617377] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.623396] sdc7 >
[ 1.623757] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.623798] md: Waiting for all devices to be available before autodetect
[ 1.623833] md: If you don't use raid, use raid=noautodetect
[ 1.623947] md: Autodetecting RAID arrays.
[ 1.721863] md: Scanned 12 and added 12 devices.
[ 1.721898] md: autorun ...
[ 1.721932] md: considering sdc6 ...
[ 1.721968] md: adding sdc6 ...
[ 1.722002] md: sdc5 has different UUID to sdc6
[ 1.722037] md: sdc3 has different UUID to sdc6
[ 1.722072] md: sdc1 has different UUID to sdc6
[ 1.722107] md: adding sda6 ...
[ 1.722142] md: sda5 has different UUID to sdc6
[ 1.722177] md: sda3 has different UUID to sdc6
[ 1.722211] md: sda1 has different UUID to sdc6
[ 1.722247] md: adding sdb6 ...
[ 1.722281] md: sdb5 has different UUID to sdc6
[ 1.722316] md: sdb3 has different UUID to sdc6
[ 1.722351] md: sdb1 has different UUID to sdc6
[ 1.722482] md: created md3
[ 1.722516] md: bind<sdb6>
[ 1.722554] md: bind<sda6>
[ 1.722590] md: bind<sdc6>
[ 1.722626] md: running: <sdc6><sda6><sdb6>
[ 1.722767] raid5: device sdc6 operational as raid disk 2
[ 1.722801] raid5: device sda6 operational as raid disk 0
[ 1.722835] raid5: device sdb6 operational as raid disk 1
[ 1.722989] raid5: allocated 3220kB for md3
[ 1.723036] raid5: raid level 5 set md3 active with 3 out of 3 devices,
algorithm 2
[ 1.723089] RAID5 conf printout:
[ 1.723122] --- rd:3 wd:3
[ 1.723156] disk 0, o:1, dev:sda6
[ 1.723189] disk 1, o:1, dev:sdb6
[ 1.723222] disk 2, o:1, dev:sdc6
[ 1.723269] md3: detected capacity change from 0 to 864065421312
[ 1.723326] md: considering sdc5 ...
[ 1.723364] md: adding sdc5 ...
[ 1.723398] md: sdc3 has different UUID to sdc5
[ 1.723433] md: sdc1 has different UUID to sdc5
[ 1.723468] md: adding sda5 ...
[ 1.723503] md: sda3 has different UUID to sdc5
[ 1.723538] md: sda1 has different UUID to sdc5
[ 1.723573] md: adding sdb5 ...
[ 1.723608] md: sdb3 has different UUID to sdc5
[ 1.723643] md: sdb1 has different UUID to sdc5
[ 1.723740] md: created md2
[ 1.723773] md: bind<sdb5>
[ 1.723810] md: bind<sda5>
[ 1.723847] md: bind<sdc5>
[ 1.723883] md: running: <sdc5><sda5><sdb5>
[ 1.724022] raid5: device sdc5 operational as raid disk 2
[ 1.724052] raid5: device sda5 operational as raid disk 0
[ 1.724086] raid5: device sdb5 operational as raid disk 1
[ 1.724241] raid5: allocated 3220kB for md2
[ 1.724292] raid5: raid level 5 set md2 active with 3 out of 3 devices,
algorithm 2
[ 1.724341] RAID5 conf printout:
[ 1.724374] --- rd:3 wd:3
[ 1.724407] disk 0, o:1, dev:sda5
[ 1.724441] disk 1, o:1, dev:sdb5
[ 1.724474] disk 2, o:1, dev:sdc5
[ 1.724518] md2: detected capacity change from 0 to 40007499776
[ 1.724587] md: considering sdc3 ...
[ 1.724623] md: adding sdc3 ...
[ 1.724657] md: sdc1 has different UUID to sdc3
[ 1.724693] md: adding sda3 ...
[ 1.724728] md: sda1 has different UUID to sdc3
[ 1.724763] md: adding sdb3 ...
[ 1.724798] md: sdb1 has different UUID to sdc3
[ 1.724896] md: created md1
[ 1.724929] md: bind<sdb3>
[ 1.724969] md: bind<sda3>
[ 1.725005] md: bind<sdc3>
[ 1.725041] md: running: <sdc3><sda3><sdb3>
[ 1.725177] raid5: device sdc3 operational as raid disk 2
[ 1.725211] raid5: device sda3 operational as raid disk 0
[ 1.725245] raid5: device sdb3 operational as raid disk 1
[ 1.725401] raid5: allocated 3220kB for md1
[ 1.725447] raid5: raid level 5 set md1 active with 3 out of 3 devices,
algorithm 2
[ 1.725500] RAID5 conf printout:
[ 1.725533] --- rd:3 wd:3
[ 1.725566] disk 0, o:1, dev:sda3
[ 1.725600] disk 1, o:1, dev:sdb3
[ 1.725633] disk 2, o:1, dev:sdc3
[ 1.725680] md1: detected capacity change from 0 to 79998877696
[ 1.725736] md: considering sdc1 ...
[ 1.725772] md: adding sdc1 ...
[ 1.725807] md: adding sda1 ...
[ 1.725842] md: adding sdb1 ...
[ 1.725875] md: created md0
[ 1.725908] md: bind<sdb1>
[ 1.725946] md: bind<sda1>
[ 1.725983] md: bind<sdc1>
[ 1.726019] md: running: <sdc1><sda1><sdb1>
[ 1.726187] raid1: raid set md0 active with 3 out of 3 mirrors
[ 1.726230] md0: detected capacity change from 0 to 65667072
[ 1.726284] md: ... autorun DONE.
[ 1.726336] md: Loading md3: /dev/sda3
[ 1.726374] md3: unknown partition table
[ 1.726532] md: couldn't update array info. -22
[ 1.726570] md: could not bd_claim sda3.
[ 1.726604] md: md_import_device returned -16
[ 1.726639] md: could not bd_claim sdb3.
[ 1.726674] md: md_import_device returned -16
[ 1.726712] md: could not bd_claim sdc3.
[ 1.726745] md: md_import_device returned -16
[ 1.726780] md: starting md3 failed
[ 1.726850] md1: unknown partition table
[ 1.763064] reiser4: md1: found disk format 4.0.0.
[ 5.786843] VFS: Mounted root (reiser4 filesystem) readonly on device 9:1.
[ 5.786894] Freeing unused kernel memory: 376k freed
[ 8.951848] udev: starting version 145
[ 9.185756] md0:
[ 9.185888] md2: unknown partition table
[ 9.205084] unknown partition table
[ 10.449026] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 10.449040] r8169 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.449287] r8169 0000:01:00.0: setting latency timer to 64
[ 10.449317] alloc irq_desc for 28 on node -1
[ 10.449319] alloc kstat_irqs on node -1
[ 10.449329] r8169 0000:01:00.0: irq 28 for MSI/MSI-X
[ 10.449435] eth0: RTL8168c/8111c at 0xffffc90012fa8000, 00:19:66:86:ce:12,
XID 3c4000c0 IRQ 28
[ 10.467952] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 10.467954] ehci_hcd: block sizes: qh 192 qtd 96 itd 192 sitd 96
[ 10.467983] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 10.468015] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 10.468183] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus
number 1
[ 10.468190] ehci_hcd 0000:00:12.2: reset hcs_params 0x102306 dbg=1 cc=2
pcc=3 ordered !ppc ports=6
[ 10.468193] ehci_hcd 0000:00:12.2: reset hcc_params a072 thresh 7 uframes
256/512/1024
[ 10.468215] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze
workaround
[ 10.468221] ehci_hcd 0000:00:12.2: reset command 080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 10.468234] ehci_hcd 0000:00:12.2: debug port 1
[ 10.468238] ehci_hcd 0000:00:12.2: MWI active
[ 10.468239] ehci_hcd 0000:00:12.2: supports USB remote wakeup
[ 10.468252] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfddff000
[ 10.468255] ehci_hcd 0000:00:12.2: reset command 080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 10.468261] ehci_hcd 0000:00:12.2: init command 010009 (park)=0 ithresh=1
period=256 RUN
[ 10.477924] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 10.477953] usb usb1: default language 0x0409
[ 10.477957] usb usb1: udev 1, busnum 1, minor = 0
[ 10.477958] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.477959] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 10.477961] usb usb1: Product: EHCI Host Controller
[ 10.477962] usb usb1: Manufacturer: Linux 2.6.31r4 ehci_hcd
[ 10.477963] usb usb1: SerialNumber: 0000:00:12.2
[ 10.477991] usb usb1: uevent
[ 10.478347] usb usb1: usb_probe_device
[ 10.478349] usb usb1: configuration #1 chosen from 1 choice
[ 10.478355] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 10.478364] usb 1-0:1.0: uevent
[ 10.478392] hub 1-0:1.0: usb_probe_interface
[ 10.478393] hub 1-0:1.0: usb_probe_interface - got id
[ 10.478395] hub 1-0:1.0: USB hub found
[ 10.478401] hub 1-0:1.0: 6 ports detected
[ 10.478402] hub 1-0:1.0: standalone hub
[ 10.478403] hub 1-0:1.0: no power switching (usb 1.0)
[ 10.478404] hub 1-0:1.0: individual port over-current protection
[ 10.478405] hub 1-0:1.0: power on to power good time: 20ms
[ 10.478408] hub 1-0:1.0: local power source is good
[ 10.478410] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 10.478452] alloc irq_desc for 19 on node -1
[ 10.478453] alloc kstat_irqs on node -1
[ 10.478458] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ
19
[ 10.478479] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 10.478518] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus
number 2
[ 10.478524] ehci_hcd 0000:00:13.2: reset hcs_params 0x102306 dbg=1 cc=2
pcc=3 ordered !ppc ports=6
[ 10.478527] ehci_hcd 0000:00:13.2: reset hcc_params a072 thresh 7 uframes
256/512/1024
[ 10.478541] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze
workaround
[ 10.478547] ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 10.478559] ehci_hcd 0000:00:13.2: debug port 1
[ 10.478562] ehci_hcd 0000:00:13.2: MWI active
[ 10.478563] ehci_hcd 0000:00:13.2: supports USB remote wakeup
[ 10.478574] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfddf6800
[ 10.478577] ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 10.478582] ehci_hcd 0000:00:13.2: init command 010009 (park)=0 ithresh=1
period=256 RUN
[ 10.488887] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 10.488909] usb usb2: default language 0x0409
[ 10.488912] usb usb2: udev 1, busnum 2, minor = 128
[ 10.488913] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.488915] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 10.488916] usb usb2: Product: EHCI Host Controller
[ 10.488917] usb usb2: Manufacturer: Linux 2.6.31r4 ehci_hcd
[ 10.488918] usb usb2: SerialNumber: 0000:00:13.2
[ 10.488948] usb usb2: uevent
[ 10.488986] usb usb2: usb_probe_device
[ 10.488988] usb usb2: configuration #1 chosen from 1 choice
[ 10.488993] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 10.489001] usb 2-0:1.0: uevent
[ 10.489020] hub 2-0:1.0: usb_probe_interface
[ 10.489021] hub 2-0:1.0: usb_probe_interface - got id
[ 10.489023] hub 2-0:1.0: USB hub found
[ 10.489028] hub 2-0:1.0: 6 ports detected
[ 10.489029] hub 2-0:1.0: standalone hub
[ 10.489030] hub 2-0:1.0: no power switching (usb 1.0)
[ 10.489032] hub 2-0:1.0: individual port over-current protection
[ 10.489033] hub 2-0:1.0: power on to power good time: 20ms
[ 10.489035] hub 2-0:1.0: local power source is good
[ 10.489037] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 10.528716] Linux video capture interface: v2.00
[ 10.541378] bttv: driver version 0.9.18 loaded
[ 10.541379] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 10.541441] bttv: Bt8xx card found (0).
[ 10.541449] alloc irq_desc for 21 on node -1
[ 10.541451] alloc kstat_irqs on node -1
[ 10.541456] bttv 0000:05:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 10.541465] bttv0: Bt848 (rev 18) at 0000:05:06.0, irq: 21, latency: 128,
mmio: 0xfcfff000
[ 10.541511] bttv0: using: Terratec TerraTV+ Version 1.0 (Bt848)/ Terra
TValue Version 1.0/ Vobis TV-Boostar [card=25,insmod option]
[ 10.541513] IRQ 21/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs
[ 10.541548] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
[ 10.577936] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001803 POWER
sig=j CSC CONNECT
[ 10.577939] hub 1-0:1.0: port 2: status 0501 change 0001
[ 10.587948] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 10.677940] hub 1-0:1.0: state 7 ports 6 chg 0004 evt 0000
[ 10.677949] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
[ 10.730446] ehci_hcd 0000:00:12.2: port 2 high speed
[ 10.730450] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER
sig=se0 PE CONNECT
[ 10.783768] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 10.837110] ehci_hcd 0000:00:12.2: port 2 high speed
[ 10.837113] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER
sig=se0 PE CONNECT
[ 10.908580] usb 1-2: default language 0x0409
[ 10.908829] usb 1-2: udev 2, busnum 1, minor = 1
[ 10.908830] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
[ 10.908832] usb 1-2: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 10.908833] usb 1-2: Product: USB2.0 Hub
[ 10.908871] usb 1-2: uevent
[ 10.908881] usb 1-2: usb_probe_device
[ 10.908883] usb 1-2: configuration #1 chosen from 1 choice
[ 10.909295] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
[ 10.909305] usb 1-2:1.0: uevent
[ 10.909313] hub 1-2:1.0: usb_probe_interface
[ 10.909314] hub 1-2:1.0: usb_probe_interface - got id
[ 10.909315] hub 1-2:1.0: USB hub found
[ 10.909576] hub 1-2:1.0: 4 ports detected
[ 10.909578] hub 1-2:1.0: standalone hub
[ 10.909579] hub 1-2:1.0: individual port power switching
[ 10.909580] hub 1-2:1.0: individual port over-current protection
[ 10.909581] hub 1-2:1.0: Single TT
[ 10.909582] hub 1-2:1.0: TT requires at most 32 FS bit times (2664 ns)
[ 10.909584] hub 1-2:1.0: Port indicators are supported
[ 10.909585] hub 1-2:1.0: power on to power good time: 100ms
[ 10.909951] hub 1-2:1.0: local power source is good
[ 10.909952] hub 1-2:1.0: enabling power on all ports
[ 11.010944] hub 1-2:1.0: port 2: status 0301 change 0001
[ 11.110432] usb 1-2: link qh256-0001/ffff8800c7800180 start 1 [1/0 us]
[ 11.110442] hub 1-2:1.0: state 7 ports 4 chg 0004 evt 0000
[ 11.110681] hub 1-2:1.0: port 2, status 0301, change 0000, 1.5 Mb/s
[ 11.177677] usb 1-2.2: new low speed USB device using ehci_hcd and address
3
[ 11.264416] usb 1-2.2: skipped 1 descriptor after interface
[ 11.264418] usb 1-2.2: skipped 1 descriptor after interface
[ 11.264913] usb 1-2.2: default language 0x0409
[ 11.267162] usb 1-2.2: udev 3, busnum 1, minor = 2
[ 11.267164] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c518
[ 11.267165] usb 1-2.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 11.267166] usb 1-2.2: Product: USB Receiver
[ 11.267167] usb 1-2.2: Manufacturer: Logitech
[ 11.267194] usb 1-2.2: uevent
[ 11.267201] usb 1-2.2: usb_probe_device
[ 11.267203] usb 1-2.2: configuration #1 chosen from 1 choice
[ 11.274538] usb 1-2.2: adding 1-2.2:1.0 (config #1, interface 0)
[ 11.274551] usb 1-2.2:1.0: uevent
[ 11.274561] usbhid 1-2.2:1.0: usb_probe_interface
[ 11.274562] usbhid 1-2.2:1.0: usb_probe_interface - got id
[ 11.274905] usb 1-2: clear tt buffer port 2, a3 ep0 t80008d42
[ 11.277797] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.0/input/input3
[ 11.277835] generic-usb 0003:046D:C518.0001: input,hidraw0: USB HID v1.11
Mouse [Logitech USB Receiver] on usb-0000:00:12.2-2.2/input0
[ 11.277844] usb 1-2.2: adding 1-2.2:1.1 (config #1, interface 1)
[ 11.277852] usb 1-2.2:1.1: uevent
[ 11.277859] usbhid 1-2.2:1.1: usb_probe_interface
[ 11.277860] usbhid 1-2.2:1.1: usb_probe_interface - got id
[ 11.278154] usb 1-2: clear tt buffer port 2, a3 ep0 t80008d42
[ 11.283458] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.1/input/input4
[ 11.283468] usb 1-2.2: link qh8-0e01/ffff8800c7800300 start 2 [1/2 us]
[ 11.283485] drivers/usb/core/file.c: looking for a minor, starting at 96
[ 11.283516] generic-usb 0003:046D:C518.0002: input,hiddev96,hidraw1: USB
HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-2.2/input1
[ 11.283531] hub 1-2:1.0: state 7 ports 4 chg 0000 evt 0004
[ 11.309746] usb 1-2.2:1.0: uevent
[ 11.309808] usb 1-2.2: uevent
[ 11.309823] usb 1-2.2:1.0: uevent
[ 11.309882] usb 1-2.2: uevent
[ 11.310370] usb 1-2.2:1.1: uevent
[ 11.310439] usb 1-2.2: uevent
[ 11.310459] usb 1-2.2:1.0: uevent
[ 11.311117] usb 1-2.2:1.1: uevent
[ 11.320348] usb 1-2.2:1.0: uevent
[ 11.546696] bttv0: tea5757: read timeout
[ 11.546698] bttv0: tuner type=5
[ 11.558212] bttv0: audio absent, no audio device found!
[ 11.570726] TUNER: Unable to find symbol tea5767_autodetection()
[ 11.570729] tuner 0-0060: chip found @ 0xc0 (bt848 #0 [sw])
[ 11.573402] tuner-simple 0-0060: creating new instance
[ 11.573405] tuner-simple 0-0060: type set to 5 (Philips PAL_BG (FI1216 and
compatibles))
[ 11.574211] bttv0: registered device video0
[ 11.574239] bttv0: registered device vbi0
[ 11.867533] reiser4: md2: found disk format 4.0.0.
[ 13.337099] hub 2-0:1.0: hub_suspend
[ 13.337105] usb usb2: bus auto-suspend
[ 13.337107] ehci_hcd 0000:00:13.2: suspend root hub
[ 13.670061] reiser4: md3: found disk format 4.0.0.
[ 54.876174] reiser4: sdc7: found disk format 4.0.0.
[ 67.268208] Adding 7815612k swap on /dev/sda2. Priority:1 extents:1
across:7815612k
[ 67.280636] Adding 7815612k swap on /dev/sdb2. Priority:1 extents:1
across:7815612k
[ 67.316664] Adding 7815612k swap on /dev/sdc2. Priority:1 extents:1
across:7815612k
[ 67.883788] w83627ehf: Found W83627EHG chip at 0x290
[ 68.285889] r8169: eth0: link up
[ 68.285899] r8169: eth0: link up
[ 70.114598] usb usb1: uevent
[ 70.114699] usb 1-0:1.0: uevent
[ 70.114788] usb 1-2: uevent
[ 70.114889] usb 1-2.2: uevent
[ 70.114988] usb 1-2.2:1.0: uevent
[ 70.115702] usb 1-2.2:1.1: uevent
[ 70.116378] usb 1-2:1.0: uevent
[ 70.116751] usb usb2: uevent
[ 70.116849] usb 2-0:1.0: uevent
[ 71.277145] alloc irq_desc for 23 on node -1
[ 71.277151] alloc kstat_irqs on node -1
[ 71.277165] EMU10K1_Audigy 0000:05:08.0: PCI INT A -> GSI 23 (level, low) -
> IRQ 23
[ 71.284131] Audigy2 value: Special config.
[ 72.553971] fglrx: module license 'Proprietary. (C) 2002 - ATI
Technologies, Starnberg, GERMANY' taints kernel.
[ 72.553980] Disabling lock debugging due to kernel taint
[ 72.603989] [fglrx] Maximum main memory to use for locked dma buffers: 7760
MBytes.
[ 72.604281] [fglrx] vendor: 1002 device: 9501 count: 1
[ 72.605042] [fglrx] ioport: bar 4, base 0xc000, size: 0x100
[ 72.605065] pci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 72.605074] pci 0000:02:00.0: setting latency timer to 64
[ 72.605605] [fglrx] Kernel PAT support is enabled
[ 72.605644] [fglrx] module loaded - fglrx 8.67.2 [Sep 15 2009] with 1
minors
[ 72.762362] alloc irq_desc for 29 on node -1
[ 72.762364] alloc kstat_irqs on node -1
[ 72.762372] fglrx_pci 0000:02:00.0: irq 29 for MSI/MSI-X
[ 72.762753] [fglrx] Firegl kernel thread PID: 3876
[ 74.920122] [fglrx] Gart USWC size:1279 M.
[ 74.920125] [fglrx] Gart cacheable size:508 M.
[ 74.920128] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 74.920129] [fglrx] Reserved FB block: Unshared offset:fbff000, size:401000
[ 74.920131] [fglrx] Reserved FB block: Unshared offset:1fffc000, size:4000
[ 76.137549] usb 1-2.2: link qh8-0e01/ffff8800c78003c0 start 3 [1/2 us]
[ 189.317763] reiser4[bogofilter(4078)]: disable_write_barrier
(fs/reiser4/wander.c:235)[zam-1055]:
[ 189.317767] NOTICE: md3 does not support write barriers, using synchronous
write instead.
cat /proc/mtrr
reg00: base=0x000000000 ( 0MB), size= 2048MB, count=1: write-back
reg01: base=0x080000000 ( 2048MB), size= 1024MB, count=1: write-back
reg02: base=0x0c0000000 ( 3072MB), size= 128MB, count=1: write-back
Glück Auf
Volker
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: amd64 + mtrr: only 3.1gb of 8gb are covered, kernel 2.6.30 and earlier.
2009-09-19 20:11 ` Volker Armin Hemmann
@ 2009-09-20 6:03 ` Yinghai Lu
2009-09-29 17:32 ` Volker Armin Hemmann
0 siblings, 1 reply; 15+ messages in thread
From: Yinghai Lu @ 2009-09-20 6:03 UTC (permalink / raw)
To: Volker Armin Hemmann; +Cc: linux-kernel
your looks ok, because you got new CPU, and HW will set WB for [4G, TOM2)
YH
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: amd64 + mtrr: only 3.1gb of 8gb are covered, kernel 2.6.30 and earlier.
2009-09-20 6:03 ` Yinghai Lu
@ 2009-09-29 17:32 ` Volker Armin Hemmann
2009-09-29 19:23 ` Yinghai Lu
0 siblings, 1 reply; 15+ messages in thread
From: Volker Armin Hemmann @ 2009-09-29 17:32 UTC (permalink / raw)
To: Yinghai Lu; +Cc: linux-kernel
On Sonntag 20 September 2009, Yinghai Lu wrote:
> your looks ok, because you got new CPU, and HW will set WB for [4G, TOM2)
so the memory beyond 4gb is covered but the coverage is not shown in
/proc/mtrr?
Glück Auf,
Volker
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: amd64 + mtrr: only 3.1gb of 8gb are covered, kernel 2.6.30 and earlier.
2009-09-29 17:32 ` Volker Armin Hemmann
@ 2009-09-29 19:23 ` Yinghai Lu
2009-09-29 19:24 ` Volker Armin Hemmann
0 siblings, 1 reply; 15+ messages in thread
From: Yinghai Lu @ 2009-09-29 19:23 UTC (permalink / raw)
To: Volker Armin Hemmann; +Cc: linux-kernel
On Tue, Sep 29, 2009 at 10:32 AM, Volker Armin Hemmann
<volkerarmin@googlemail.com> wrote:
> On Sonntag 20 September 2009, Yinghai Lu wrote:
>> your looks ok, because you got new CPU, and HW will set WB for [4G, TOM2)
>
> so the memory beyond 4gb is covered but the coverage is not shown in
> /proc/mtrr?
right.
YH
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: amd64 + mtrr: only 3.1gb of 8gb are covered, kernel 2.6.30 and earlier.
2009-09-29 19:23 ` Yinghai Lu
@ 2009-09-29 19:24 ` Volker Armin Hemmann
0 siblings, 0 replies; 15+ messages in thread
From: Volker Armin Hemmann @ 2009-09-29 19:24 UTC (permalink / raw)
To: Yinghai Lu; +Cc: linux-kernel
On Dienstag 29 September 2009, Yinghai Lu wrote:
> On Tue, Sep 29, 2009 at 10:32 AM, Volker Armin Hemmann
>
> <volkerarmin@googlemail.com> wrote:
> > On Sonntag 20 September 2009, Yinghai Lu wrote:
> >> your looks ok, because you got new CPU, and HW will set WB for [4G,
> >> TOM2)
> >
> > so the memory beyond 4gb is covered but the coverage is not shown in
> > /proc/mtrr?
>
> right.
>
> YH
>
ok,
thank you
Glück Auf,
Volker
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: amd64 + mtrr: only 3.1gb of 8gb are covered, kernel 2.6.30 and earlier.
@ 2009-08-22 19:29 Volker Armin Hemmann
0 siblings, 0 replies; 15+ messages in thread
From: Volker Armin Hemmann @ 2009-08-22 19:29 UTC (permalink / raw)
To: linux-kernel
On Samstag 22 August 2009, you wrote:
> On Sat, Aug 22, 2009 at 11:54 AM, Volker Armin
>
> Hemmann<volkerarmin@googlemail.com> wrote:
> > On Samstag 22 August 2009, Yinghai Lu wrote:
> >> On Fri, Aug 21, 2009 at 9:14 AM, Volker Armin
> >>
> >> Hemmann<volkerarmin@googlemail.com> wrote:
> >> > Hi,
> >> >
> >> > I have an amd64 system with 8GB ram. Of these only 3.1GB are currently
> >> > covered with mtrr:
> >> > cat /proc/mtrr
> >> > reg00: base=0x000000000 ( 0MB), size= 2048MB, count=1: write-back
> >> > reg01: base=0x080000000 ( 2048MB), size= 1024MB, count=1: write-back
> >> > reg02: base=0x0c0000000 ( 3072MB), size= 128MB, count=1: write-back
> >> >
> >> > This is with a Phenom II X4. Mobo is an Asrock A770Crossfire with AMD
> >> > 770 chipset. Ram is 1066 ddr2 running at 800.
> >> >
> >> > Before that I had a X2 6000 where I had one more mtrr, covering
> >> > additional 256mb with 6gb ram total.
> >> >
> >> > When I use the opensource driver, I get a 'mtrr disabled' message when
> >> > X starts, nothing like that with fglrx. The results are the same.
> >> >
> >> > Is there anything that I can do about it? I already played with mtrr
> >> > cleanup options - without any results.
> >> >
> >> > Except for reiser4 the kernel is 'vanilla', config is attached, dmesg
> >> > and lspci are folloiwing:
> >> >
> >> > dmesg:
> >> > [ 0.000000] Linux version 2.6.30.5r4 (root@energy) (gcc version
> >> > 4.4.1 (Gentoo 4.4.1 p1.0) ) #1 SMP Tue Aug 18 06:28:18 CEST 2009
> >> > [ 0.000000] Command line: root=/dev/md1
> >> > md=3,/dev/sda3,/dev/sdb3,/dev/sdc3 nmi_watchdog=0 mtrr_spare_reg_nr=1
> >> > [ 0.000000] KERNEL supported cpus:
> >> > [ 0.000000] Intel GenuineIntel
> >> > [ 0.000000] AMD AuthenticAMD
> >> > [ 0.000000] BIOS-provided physical RAM map:
> >> > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00
> >> > (usable) [ 0.000000] BIOS-e820: 000000000009fc00 -
> >> > 00000000000a0000 (reserved) [ 0.000000] BIOS-e820:
> >> > 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000]
> >> > BIOS-e820: 0000000000100000 - 00000000c7eb0000 (usable) [
> >> > 0.000000] BIOS-e820: 00000000c7eb0000 - 00000000c7ec0000 (ACPI data)
> >> > [ 0.000000] BIOS-e820: 00000000c7ec0000 - 00000000c7ef0000 (ACPI
> >> > NVS) [ 0.000000] BIOS-e820: 00000000c7ef0000 - 00000000c7f00000
> >> > (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 -
> >> > 0000000100000000 (reserved) [ 0.000000] BIOS-e820:
> >> > 0000000100000000 - 0000000238000000 (usable) [ 0.000000] DMI
> >> > present.
> >> > [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working
> >> > around it. [ 0.000000] e820 update range: 0000000000000000 -
> >> > 0000000000010000 (usable) ==> (reserved)
> >> > [ 0.000000] last_pfn = 0x238000 max_arch_pfn = 0x100000000
> >> > [ 0.000000] MTRR default type: uncachable
> >> > [ 0.000000] MTRR fixed ranges enabled:
> >> > [ 0.000000] 00000-9FFFF write-back
> >> > [ 0.000000] A0000-EFFFF uncachable
> >> > [ 0.000000] F0000-FFFFF write-protect
> >> > [ 0.000000] MTRR variable ranges enabled:
> >> > [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
> >> > [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
> >> > [ 0.000000] 2 base 0000C0000000 mask FFFFF8000000 write-back
> >> > [ 0.000000] 3 disabled
> >> > [ 0.000000] 4 disabled
> >> > [ 0.000000] 5 disabled
> >> > [ 0.000000] 6 disabled
> >> > [ 0.000000] 7 disabled
> >> > [ 0.000000] TOM2: 0000000238000000 aka 9088M
> >> > [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
> >> > 0x7010600070106
> >> > [ 0.000000] e820 update range: 00000000c8000000 - 0000000100000000
> >> > (usable) ==> (reserved)
> >>
> >> ...
> >>
> >> > 02:00.0 VGA compatible controller: ATI Technologies Inc Radeon HD 3870
> >> > (prog- if 00 [VGA controller])
> >> > Subsystem: Info-Tek Corp. Device 4070
> >> > Flags: bus master, fast devsel, latency 0, IRQ 30
> >> > Memory at d0000000 (64-bit, prefetchable) [size=256M]
> >> > Memory at fdff0000 (64-bit, non-prefetchable) [size=64K]
> >> > I/O ports at b000 [size=256]
> >> > Expansion ROM at fdfc0000 [disabled] [size=128K]
> >> > Capabilities: [50] Power Management version 3
> >> > Capabilities: [58] Express Legacy Endpoint, MSI 00
> >> > Capabilities: [a0] MSI: Mask- 64bit+ Count=1/1 Enable+
> >> > Capabilities: [100] Vendor Specific Information <?>
> >> > Kernel driver in use: fglrx_pci
> >> > Kernel modules: fglrx
> >>
> >> after your start X server, how about cat /proc/mtrr?
> >>
> >> thought there should be one WC entry about 256M... for graphics card.
> >>
> >> YH
> >
> > running X:
> >
> > cat /proc/mtrr
> > reg00: base=0x000000000 ( 0MB), size= 2048MB, count=1: write-back
> > reg01: base=0x080000000 ( 2048MB), size= 1024MB, count=1: write-back
> > reg02: base=0x0c0000000 ( 3072MB), size= 128MB, count=1: write-back
> >
> > back with my X2 6000 and 4 and 6gb ram, I indeed got another mtrr with
> > 256mb. But with the phenom and 8gb I don't get it. Neither with fglrx nor
> > with xorg's radeon driver. Radeon posts a message to dmesg about disabled
> > mtrr.
>
> you should have
> reg03: base=0x0d0000000 ( 3200MB), size= 256MB, count=1: write-combining
back with my X2 6000 I had that.
>
> do you notice any performance degrade without that entry?
>
> YH
when I went from 4gb to 6gb I had a performance degradation. Since the 8gb are
faster and the new cpu is faster, I don't see degradation. But I wonder how
much better performance could be with 'correct' mtrr.
Glück Auf
Volker
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2009-09-29 19:24 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-08-21 16:14 amd64 + mtrr: only 3.1gb of 8gb are covered, kernel 2.6.30 and earlier Volker Armin Hemmann
2009-08-22 5:43 ` Robert Hancock
2009-08-22 18:48 ` Yinghai Lu
2009-08-22 18:54 ` Volker Armin Hemmann
2009-08-22 19:04 ` Yinghai Lu
[not found] ` <200908222126.31390.volkerarmin@googlemail.com>
[not found] ` <86802c440908222322s44957498s72a76940f89271cf@mail.gmail.com>
2009-08-23 9:11 ` Volker Armin Hemmann
2009-08-27 1:13 ` Volker Armin Hemmann
2009-08-27 7:13 ` Yinghai Lu
2009-08-27 16:28 ` Volker Armin Hemmann
2009-09-19 20:11 ` Volker Armin Hemmann
2009-09-20 6:03 ` Yinghai Lu
2009-09-29 17:32 ` Volker Armin Hemmann
2009-09-29 19:23 ` Yinghai Lu
2009-09-29 19:24 ` Volker Armin Hemmann
2009-08-22 19:29 Volker Armin Hemmann
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.