From: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
To: nbd@nbd.name
Cc: linux-wireless@vger.kernel.org, sgruszka@redhat.com
Subject: [RFC 13/18] mt76: add mt76x2_init_common to mt76x2-common module
Date: Mon, 30 Apr 2018 16:12:28 +0200 [thread overview]
Message-ID: <8693edc40f60a49ffd37261d299d42e33347093a.1525096206.git.lorenzo.bianconi@redhat.com> (raw)
In-Reply-To: <cover.1525096206.git.lorenzo.bianconi@redhat.com>
Move init related code shared between mt76x2 and mt76x2u in
mt76x2-common module
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
---
drivers/net/wireless/mediatek/mt76/Makefile | 3 +-
drivers/net/wireless/mediatek/mt76/mt76x2.h | 6 +
drivers/net/wireless/mediatek/mt76/mt76x2_init.c | 232 -------------------
.../wireless/mediatek/mt76/mt76x2_init_common.c | 253 +++++++++++++++++++++
4 files changed, 261 insertions(+), 233 deletions(-)
create mode 100644 drivers/net/wireless/mediatek/mt76/mt76x2_init_common.c
diff --git a/drivers/net/wireless/mediatek/mt76/Makefile b/drivers/net/wireless/mediatek/mt76/Makefile
index bedb671200ea..8342b4d38220 100644
--- a/drivers/net/wireless/mediatek/mt76/Makefile
+++ b/drivers/net/wireless/mediatek/mt76/Makefile
@@ -8,7 +8,8 @@ mt76-y := \
CFLAGS_trace.o := -I$(src)
mt76x2-common-y := \
- mt76x2_eeprom.o mt76x2_tx_common.o mt76x2_mac_common.o
+ mt76x2_eeprom.o mt76x2_tx_common.o mt76x2_mac_common.o \
+ mt76x2_init_common.o
mt76x2e-y := \
mt76x2_pci.o mt76x2_dma.o \
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2.h b/drivers/net/wireless/mediatek/mt76/mt76x2.h
index dacfa5920f2c..1154abef8d90 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x2.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2.h
@@ -207,6 +207,8 @@ static inline bool wait_for_wpdma(struct mt76x2_dev *dev)
extern const struct ieee80211_ops mt76x2_ops;
+extern struct ieee80211_rate mt76x2_rates[12];
+
struct mt76x2_dev *mt76x2_alloc_device(struct device *pdev);
int mt76x2_register_device(struct mt76x2_dev *dev);
void mt76x2_init_debugfs(struct mt76x2_dev *dev);
@@ -273,5 +275,9 @@ int mt76x2_insert_hdr_pad(struct sk_buff *skb);
struct mt76x2_tx_status mt76x2_mac_load_tx_status(struct mt76x2_dev *dev);
void mt76x2_send_tx_status(struct mt76x2_dev *dev,
struct mt76x2_tx_status *stat, u8 *update);
+void mt76x2_reset_wlan(struct mt76x2_dev *dev, bool enable);
+void mt76x2_init_txpower(struct mt76x2_dev *dev,
+ struct ieee80211_supported_band *sband);
+void mt76_write_mac_initvals(struct mt76x2_dev *dev);
#endif
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2_init.c b/drivers/net/wireless/mediatek/mt76/mt76x2_init.c
index 3b081fe2acbe..bba49ee4fb8d 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x2_init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2_init.c
@@ -19,11 +19,6 @@
#include "mt76x2_eeprom.h"
#include "mt76x2_mcu.h"
-struct mt76x2_reg_pair {
- u32 reg;
- u32 value;
-};
-
static void
mt76x2_mac_pbf_init(struct mt76x2_dev *dev)
{
@@ -42,107 +37,6 @@ mt76x2_mac_pbf_init(struct mt76x2_dev *dev)
mt76_wr(dev, MT_PBF_RX_MAX_PCNT, 0xfebf);
}
-static void
-mt76x2_write_reg_pairs(struct mt76x2_dev *dev,
- const struct mt76x2_reg_pair *data, int len)
-{
- while (len > 0) {
- mt76_wr(dev, data->reg, data->value);
- len--;
- data++;
- }
-}
-
-static void
-mt76_write_mac_initvals(struct mt76x2_dev *dev)
-{
-#define DEFAULT_PROT_CFG \
- (FIELD_PREP(MT_PROT_CFG_RATE, 0x2004) | \
- FIELD_PREP(MT_PROT_CFG_NAV, 1) | \
- FIELD_PREP(MT_PROT_CFG_TXOP_ALLOW, 0x3f) | \
- MT_PROT_CFG_RTS_THRESH)
-
-#define DEFAULT_PROT_CFG_20 \
- (FIELD_PREP(MT_PROT_CFG_RATE, 0x2004) | \
- FIELD_PREP(MT_PROT_CFG_CTRL, 1) | \
- FIELD_PREP(MT_PROT_CFG_NAV, 1) | \
- FIELD_PREP(MT_PROT_CFG_TXOP_ALLOW, 0x17))
-
-#define DEFAULT_PROT_CFG_40 \
- (FIELD_PREP(MT_PROT_CFG_RATE, 0x2084) | \
- FIELD_PREP(MT_PROT_CFG_CTRL, 1) | \
- FIELD_PREP(MT_PROT_CFG_NAV, 1) | \
- FIELD_PREP(MT_PROT_CFG_TXOP_ALLOW, 0x3f))
-
- static const struct mt76x2_reg_pair vals[] = {
- /* Copied from MediaTek reference source */
- { MT_PBF_SYS_CTRL, 0x00080c00 },
- { MT_PBF_CFG, 0x1efebcff },
- { MT_FCE_PSE_CTRL, 0x00000001 },
- { MT_MAC_SYS_CTRL, 0x0000000c },
- { MT_MAX_LEN_CFG, 0x003e3f00 },
- { MT_AMPDU_MAX_LEN_20M1S, 0xaaa99887 },
- { MT_AMPDU_MAX_LEN_20M2S, 0x000000aa },
- { MT_XIFS_TIME_CFG, 0x33a40d0a },
- { MT_BKOFF_SLOT_CFG, 0x00000209 },
- { MT_TBTT_SYNC_CFG, 0x00422010 },
- { MT_PWR_PIN_CFG, 0x00000000 },
- { 0x1238, 0x001700c8 },
- { MT_TX_SW_CFG0, 0x00101001 },
- { MT_TX_SW_CFG1, 0x00010000 },
- { MT_TX_SW_CFG2, 0x00000000 },
- { MT_TXOP_CTRL_CFG, 0x0400583f },
- { MT_TX_RTS_CFG, 0x00100020 },
- { MT_TX_TIMEOUT_CFG, 0x000a2290 },
- { MT_TX_RETRY_CFG, 0x47f01f0f },
- { MT_EXP_ACK_TIME, 0x002c00dc },
- { MT_TX_PROT_CFG6, 0xe3f42004 },
- { MT_TX_PROT_CFG7, 0xe3f42084 },
- { MT_TX_PROT_CFG8, 0xe3f42104 },
- { MT_PIFS_TX_CFG, 0x00060fff },
- { MT_RX_FILTR_CFG, 0x00015f97 },
- { MT_LEGACY_BASIC_RATE, 0x0000017f },
- { MT_HT_BASIC_RATE, 0x00004003 },
- { MT_PN_PAD_MODE, 0x00000003 },
- { MT_TXOP_HLDR_ET, 0x00000002 },
- { 0xa44, 0x00000000 },
- { MT_HEADER_TRANS_CTRL_REG, 0x00000000 },
- { MT_TSO_CTRL, 0x00000000 },
- { MT_AUX_CLK_CFG, 0x00000000 },
- { MT_DACCLK_EN_DLY_CFG, 0x00000000 },
- { MT_TX_ALC_CFG_4, 0x00000000 },
- { MT_TX_ALC_VGA3, 0x00000000 },
- { MT_TX_PWR_CFG_0, 0x3a3a3a3a },
- { MT_TX_PWR_CFG_1, 0x3a3a3a3a },
- { MT_TX_PWR_CFG_2, 0x3a3a3a3a },
- { MT_TX_PWR_CFG_3, 0x3a3a3a3a },
- { MT_TX_PWR_CFG_4, 0x3a3a3a3a },
- { MT_TX_PWR_CFG_7, 0x3a3a3a3a },
- { MT_TX_PWR_CFG_8, 0x0000003a },
- { MT_TX_PWR_CFG_9, 0x0000003a },
- { MT_EFUSE_CTRL, 0x0000d000 },
- { MT_PAUSE_ENABLE_CONTROL1, 0x0000000a },
- { MT_FCE_WLAN_FLOW_CONTROL1, 0x60401c18 },
- { MT_WPDMA_DELAY_INT_CFG, 0x94ff0000 },
- { MT_TX_SW_CFG3, 0x00000004 },
- { MT_HT_FBK_TO_LEGACY, 0x00001818 },
- { MT_VHT_HT_FBK_CFG1, 0xedcba980 },
- { MT_PROT_AUTO_TX_CFG, 0x00830083 },
- { MT_HT_CTRL_CFG, 0x000001ff },
- };
- struct mt76x2_reg_pair prot_vals[] = {
- { MT_CCK_PROT_CFG, DEFAULT_PROT_CFG },
- { MT_OFDM_PROT_CFG, DEFAULT_PROT_CFG },
- { MT_MM20_PROT_CFG, DEFAULT_PROT_CFG_20 },
- { MT_MM40_PROT_CFG, DEFAULT_PROT_CFG_40 },
- { MT_GF20_PROT_CFG, DEFAULT_PROT_CFG_20 },
- { MT_GF40_PROT_CFG, DEFAULT_PROT_CFG_40 },
- };
-
- mt76x2_write_reg_pairs(dev, vals, ARRAY_SIZE(vals));
- mt76x2_write_reg_pairs(dev, prot_vals, ARRAY_SIZE(prot_vals));
-}
-
static void
mt76x2_fixup_xtal(struct mt76x2_dev *dev)
{
@@ -464,45 +358,6 @@ void mt76x2_set_tx_ackto(struct mt76x2_dev *dev)
MT_TX_TIMEOUT_CFG_ACKTO, ackto);
}
-static void
-mt76x2_set_wlan_state(struct mt76x2_dev *dev, bool enable)
-{
- u32 val = mt76_rr(dev, MT_WLAN_FUN_CTRL);
-
- if (enable)
- val |= (MT_WLAN_FUN_CTRL_WLAN_EN |
- MT_WLAN_FUN_CTRL_WLAN_CLK_EN);
- else
- val &= ~(MT_WLAN_FUN_CTRL_WLAN_EN |
- MT_WLAN_FUN_CTRL_WLAN_CLK_EN);
-
- mt76_wr(dev, MT_WLAN_FUN_CTRL, val);
- udelay(20);
-}
-
-static void
-mt76x2_reset_wlan(struct mt76x2_dev *dev, bool enable)
-{
- u32 val;
-
- val = mt76_rr(dev, MT_WLAN_FUN_CTRL);
-
- val &= ~MT_WLAN_FUN_CTRL_FRC_WL_ANT_SEL;
-
- if (val & MT_WLAN_FUN_CTRL_WLAN_EN) {
- val |= MT_WLAN_FUN_CTRL_WLAN_RESET_RF;
- mt76_wr(dev, MT_WLAN_FUN_CTRL, val);
- udelay(20);
-
- val &= ~MT_WLAN_FUN_CTRL_WLAN_RESET_RF;
- }
-
- mt76_wr(dev, MT_WLAN_FUN_CTRL, val);
- udelay(20);
-
- mt76x2_set_wlan_state(dev, enable);
-}
-
int mt76x2_init_hardware(struct mt76x2_dev *dev)
{
static const u16 beacon_offsets[16] = {
@@ -626,34 +481,6 @@ static void mt76x2_regd_notifier(struct wiphy *wiphy,
mt76x2_dfs_set_domain(dev, request->dfs_region);
}
-#define CCK_RATE(_idx, _rate) { \
- .bitrate = _rate, \
- .flags = IEEE80211_RATE_SHORT_PREAMBLE, \
- .hw_value = (MT_PHY_TYPE_CCK << 8) | _idx, \
- .hw_value_short = (MT_PHY_TYPE_CCK << 8) | (8 + _idx), \
-}
-
-#define OFDM_RATE(_idx, _rate) { \
- .bitrate = _rate, \
- .hw_value = (MT_PHY_TYPE_OFDM << 8) | _idx, \
- .hw_value_short = (MT_PHY_TYPE_OFDM << 8) | _idx, \
-}
-
-static struct ieee80211_rate mt76x2_rates[] = {
- CCK_RATE(0, 10),
- CCK_RATE(1, 20),
- CCK_RATE(2, 55),
- CCK_RATE(3, 110),
- OFDM_RATE(0, 60),
- OFDM_RATE(1, 90),
- OFDM_RATE(2, 120),
- OFDM_RATE(3, 180),
- OFDM_RATE(4, 240),
- OFDM_RATE(5, 360),
- OFDM_RATE(6, 480),
- OFDM_RATE(7, 540),
-};
-
static const struct ieee80211_iface_limit if_limits[] = {
{
.max = 1,
@@ -730,65 +557,6 @@ static void mt76x2_led_set_brightness(struct led_classdev *led_cdev,
mt76x2_led_set_config(mt76, 0xff, 0);
}
-static void
-mt76x2_init_txpower(struct mt76x2_dev *dev,
- struct ieee80211_supported_band *sband)
-{
- struct ieee80211_channel *chan;
- struct mt76x2_tx_power_info txp;
- struct mt76_rate_power t = {};
- int target_power;
- int i;
-
- for (i = 0; i < sband->n_channels; i++) {
- chan = &sband->channels[i];
-
- mt76x2_get_power_info(dev, &txp, chan);
-
- target_power = max_t(int, (txp.chain[0].target_power +
- txp.chain[0].delta),
- (txp.chain[1].target_power +
- txp.chain[1].delta));
-
- mt76x2_get_rate_power(dev, &t, chan);
-
- chan->max_power = mt76x2_get_max_rate_power(&t) +
- target_power;
- chan->max_power /= 2;
-
- /* convert to combined output power on 2x2 devices */
- chan->max_power += 3;
- }
-}
-
-void mt76x2_init_device(struct mt76x2_dev *dev)
-{
- struct ieee80211_hw *hw = mt76_hw(dev);
-
- hw->queues = 4;
- hw->max_rates = 1;
- hw->max_report_rates = 7;
- hw->max_rate_tries = 1;
- hw->extra_tx_headroom = 2;
-
- hw->sta_data_size = sizeof(struct mt76x2_sta);
- hw->vif_data_size = sizeof(struct mt76x2_vif);
-
- ieee80211_hw_set(hw, SUPPORTS_HT_CCK_RATES);
- ieee80211_hw_set(hw, SUPPORTS_REORDERING_BUFFER);
-
- dev->mt76.sband_2g.sband.ht_cap.cap |= IEEE80211_HT_CAP_LDPC_CODING;
- dev->mt76.sband_5g.sband.ht_cap.cap |= IEEE80211_HT_CAP_LDPC_CODING;
-
- dev->chainmask = 0x202;
- dev->global_wcid.idx = 255;
- dev->global_wcid.hw_key_idx = -1;
- dev->slottime = 9;
-
- /* init antenna configuration */
- dev->mt76.antenna_mask = 3;
-}
-
int mt76x2_register_device(struct mt76x2_dev *dev)
{
struct ieee80211_hw *hw = mt76_hw(dev);
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2_init_common.c b/drivers/net/wireless/mediatek/mt76/mt76x2_init_common.c
new file mode 100644
index 000000000000..94ffd131c8ae
--- /dev/null
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2_init_common.c
@@ -0,0 +1,253 @@
+/*
+ * Copyright (C) 2016 Felix Fietkau <nbd@nbd.name>
+ * Copyright (C) 2018 Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "mt76x2.h"
+#include "mt76x2_eeprom.h"
+
+#define CCK_RATE(_idx, _rate) { \
+ .bitrate = _rate, \
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE, \
+ .hw_value = (MT_PHY_TYPE_CCK << 8) | _idx, \
+ .hw_value_short = (MT_PHY_TYPE_CCK << 8) | (8 + _idx), \
+}
+
+#define OFDM_RATE(_idx, _rate) { \
+ .bitrate = _rate, \
+ .hw_value = (MT_PHY_TYPE_OFDM << 8) | _idx, \
+ .hw_value_short = (MT_PHY_TYPE_OFDM << 8) | _idx, \
+}
+
+struct ieee80211_rate mt76x2_rates[] = {
+ CCK_RATE(0, 10),
+ CCK_RATE(1, 20),
+ CCK_RATE(2, 55),
+ CCK_RATE(3, 110),
+ OFDM_RATE(0, 60),
+ OFDM_RATE(1, 90),
+ OFDM_RATE(2, 120),
+ OFDM_RATE(3, 180),
+ OFDM_RATE(4, 240),
+ OFDM_RATE(5, 360),
+ OFDM_RATE(6, 480),
+ OFDM_RATE(7, 540),
+};
+EXPORT_SYMBOL_GPL(mt76x2_rates);
+
+struct mt76x2_reg_pair {
+ u32 reg;
+ u32 value;
+};
+
+static void
+mt76x2_set_wlan_state(struct mt76x2_dev *dev, bool enable)
+{
+ u32 val = mt76_rr(dev, MT_WLAN_FUN_CTRL);
+
+ if (enable)
+ val |= (MT_WLAN_FUN_CTRL_WLAN_EN |
+ MT_WLAN_FUN_CTRL_WLAN_CLK_EN);
+ else
+ val &= ~(MT_WLAN_FUN_CTRL_WLAN_EN |
+ MT_WLAN_FUN_CTRL_WLAN_CLK_EN);
+
+ mt76_wr(dev, MT_WLAN_FUN_CTRL, val);
+ udelay(20);
+}
+
+void mt76x2_reset_wlan(struct mt76x2_dev *dev, bool enable)
+{
+ u32 val;
+
+ val = mt76_rr(dev, MT_WLAN_FUN_CTRL);
+
+ val &= ~MT_WLAN_FUN_CTRL_FRC_WL_ANT_SEL;
+
+ if (val & MT_WLAN_FUN_CTRL_WLAN_EN) {
+ val |= MT_WLAN_FUN_CTRL_WLAN_RESET_RF;
+ mt76_wr(dev, MT_WLAN_FUN_CTRL, val);
+ udelay(20);
+
+ val &= ~MT_WLAN_FUN_CTRL_WLAN_RESET_RF;
+ }
+
+ mt76_wr(dev, MT_WLAN_FUN_CTRL, val);
+ udelay(20);
+
+ mt76x2_set_wlan_state(dev, enable);
+}
+EXPORT_SYMBOL_GPL(mt76x2_reset_wlan);
+
+static void
+mt76x2_write_reg_pairs(struct mt76x2_dev *dev,
+ const struct mt76x2_reg_pair *data, int len)
+{
+ while (len > 0) {
+ mt76_wr(dev, data->reg, data->value);
+ len--;
+ data++;
+ }
+}
+
+void mt76_write_mac_initvals(struct mt76x2_dev *dev)
+{
+#define DEFAULT_PROT_CFG \
+ (FIELD_PREP(MT_PROT_CFG_RATE, 0x2004) | \
+ FIELD_PREP(MT_PROT_CFG_NAV, 1) | \
+ FIELD_PREP(MT_PROT_CFG_TXOP_ALLOW, 0x3f) | \
+ MT_PROT_CFG_RTS_THRESH)
+
+#define DEFAULT_PROT_CFG_20 \
+ (FIELD_PREP(MT_PROT_CFG_RATE, 0x2004) | \
+ FIELD_PREP(MT_PROT_CFG_CTRL, 1) | \
+ FIELD_PREP(MT_PROT_CFG_NAV, 1) | \
+ FIELD_PREP(MT_PROT_CFG_TXOP_ALLOW, 0x17))
+
+#define DEFAULT_PROT_CFG_40 \
+ (FIELD_PREP(MT_PROT_CFG_RATE, 0x2084) | \
+ FIELD_PREP(MT_PROT_CFG_CTRL, 1) | \
+ FIELD_PREP(MT_PROT_CFG_NAV, 1) | \
+ FIELD_PREP(MT_PROT_CFG_TXOP_ALLOW, 0x3f))
+
+ static const struct mt76x2_reg_pair vals[] = {
+ /* Copied from MediaTek reference source */
+ { MT_PBF_SYS_CTRL, 0x00080c00 },
+ { MT_PBF_CFG, 0x1efebcff },
+ { MT_FCE_PSE_CTRL, 0x00000001 },
+ { MT_MAC_SYS_CTRL, 0x0000000c },
+ { MT_MAX_LEN_CFG, 0x003e3f00 },
+ { MT_AMPDU_MAX_LEN_20M1S, 0xaaa99887 },
+ { MT_AMPDU_MAX_LEN_20M2S, 0x000000aa },
+ { MT_XIFS_TIME_CFG, 0x33a40d0a },
+ { MT_BKOFF_SLOT_CFG, 0x00000209 },
+ { MT_TBTT_SYNC_CFG, 0x00422010 },
+ { MT_PWR_PIN_CFG, 0x00000000 },
+ { 0x1238, 0x001700c8 },
+ { MT_TX_SW_CFG0, 0x00101001 },
+ { MT_TX_SW_CFG1, 0x00010000 },
+ { MT_TX_SW_CFG2, 0x00000000 },
+ { MT_TXOP_CTRL_CFG, 0x0400583f },
+ { MT_TX_RTS_CFG, 0x00100020 },
+ { MT_TX_TIMEOUT_CFG, 0x000a2290 },
+ { MT_TX_RETRY_CFG, 0x47f01f0f },
+ { MT_EXP_ACK_TIME, 0x002c00dc },
+ { MT_TX_PROT_CFG6, 0xe3f42004 },
+ { MT_TX_PROT_CFG7, 0xe3f42084 },
+ { MT_TX_PROT_CFG8, 0xe3f42104 },
+ { MT_PIFS_TX_CFG, 0x00060fff },
+ { MT_RX_FILTR_CFG, 0x00015f97 },
+ { MT_LEGACY_BASIC_RATE, 0x0000017f },
+ { MT_HT_BASIC_RATE, 0x00004003 },
+ { MT_PN_PAD_MODE, 0x00000003 },
+ { MT_TXOP_HLDR_ET, 0x00000002 },
+ { 0xa44, 0x00000000 },
+ { MT_HEADER_TRANS_CTRL_REG, 0x00000000 },
+ { MT_TSO_CTRL, 0x00000000 },
+ { MT_AUX_CLK_CFG, 0x00000000 },
+ { MT_DACCLK_EN_DLY_CFG, 0x00000000 },
+ { MT_TX_ALC_CFG_4, 0x00000000 },
+ { MT_TX_ALC_VGA3, 0x00000000 },
+ { MT_TX_PWR_CFG_0, 0x3a3a3a3a },
+ { MT_TX_PWR_CFG_1, 0x3a3a3a3a },
+ { MT_TX_PWR_CFG_2, 0x3a3a3a3a },
+ { MT_TX_PWR_CFG_3, 0x3a3a3a3a },
+ { MT_TX_PWR_CFG_4, 0x3a3a3a3a },
+ { MT_TX_PWR_CFG_7, 0x3a3a3a3a },
+ { MT_TX_PWR_CFG_8, 0x0000003a },
+ { MT_TX_PWR_CFG_9, 0x0000003a },
+ { MT_EFUSE_CTRL, 0x0000d000 },
+ { MT_PAUSE_ENABLE_CONTROL1, 0x0000000a },
+ { MT_FCE_WLAN_FLOW_CONTROL1, 0x60401c18 },
+ { MT_WPDMA_DELAY_INT_CFG, 0x94ff0000 },
+ { MT_TX_SW_CFG3, 0x00000004 },
+ { MT_HT_FBK_TO_LEGACY, 0x00001818 },
+ { MT_VHT_HT_FBK_CFG1, 0xedcba980 },
+ { MT_PROT_AUTO_TX_CFG, 0x00830083 },
+ { MT_HT_CTRL_CFG, 0x000001ff },
+ };
+ struct mt76x2_reg_pair prot_vals[] = {
+ { MT_CCK_PROT_CFG, DEFAULT_PROT_CFG },
+ { MT_OFDM_PROT_CFG, DEFAULT_PROT_CFG },
+ { MT_MM20_PROT_CFG, DEFAULT_PROT_CFG_20 },
+ { MT_MM40_PROT_CFG, DEFAULT_PROT_CFG_40 },
+ { MT_GF20_PROT_CFG, DEFAULT_PROT_CFG_20 },
+ { MT_GF40_PROT_CFG, DEFAULT_PROT_CFG_40 },
+ };
+
+ mt76x2_write_reg_pairs(dev, vals, ARRAY_SIZE(vals));
+ mt76x2_write_reg_pairs(dev, prot_vals, ARRAY_SIZE(prot_vals));
+}
+EXPORT_SYMBOL_GPL(mt76_write_mac_initvals);
+
+void mt76x2_init_device(struct mt76x2_dev *dev)
+{
+ struct ieee80211_hw *hw = mt76_hw(dev);
+
+ hw->queues = 4;
+ hw->max_rates = 1;
+ hw->max_report_rates = 7;
+ hw->max_rate_tries = 1;
+ hw->extra_tx_headroom = 2;
+
+ hw->sta_data_size = sizeof(struct mt76x2_sta);
+ hw->vif_data_size = sizeof(struct mt76x2_vif);
+
+ ieee80211_hw_set(hw, SUPPORTS_HT_CCK_RATES);
+ ieee80211_hw_set(hw, SUPPORTS_REORDERING_BUFFER);
+
+ dev->mt76.sband_2g.sband.ht_cap.cap |= IEEE80211_HT_CAP_LDPC_CODING;
+ dev->mt76.sband_5g.sband.ht_cap.cap |= IEEE80211_HT_CAP_LDPC_CODING;
+
+ dev->chainmask = 0x202;
+ dev->global_wcid.idx = 255;
+ dev->global_wcid.hw_key_idx = -1;
+ dev->slottime = 9;
+
+ /* init antenna configuration */
+ dev->mt76.antenna_mask = 3;
+}
+EXPORT_SYMBOL_GPL(mt76x2_init_device);
+
+void mt76x2_init_txpower(struct mt76x2_dev *dev,
+ struct ieee80211_supported_band *sband)
+{
+ struct ieee80211_channel *chan;
+ struct mt76x2_tx_power_info txp;
+ struct mt76_rate_power t = {};
+ int target_power;
+ int i;
+
+ for (i = 0; i < sband->n_channels; i++) {
+ chan = &sband->channels[i];
+
+ mt76x2_get_power_info(dev, &txp, chan);
+
+ target_power = max_t(int, (txp.chain[0].target_power +
+ txp.chain[0].delta),
+ (txp.chain[1].target_power +
+ txp.chain[1].delta));
+
+ mt76x2_get_rate_power(dev, &t, chan);
+
+ chan->max_power = mt76x2_get_max_rate_power(&t) +
+ target_power;
+ chan->max_power /= 2;
+
+ /* convert to combined output power on 2x2 devices */
+ chan->max_power += 3;
+ }
+}
+EXPORT_SYMBOL_GPL(mt76x2_init_txpower);
--
2.14.3
next prev parent reply other threads:[~2018-04-30 14:13 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-30 14:12 [RFC 00/18] add mt76x2u support to mt76 driver Lorenzo Bianconi
2018-04-30 14:12 ` [RFC 01/18] mt76x2: use completion instead of wait_queue for mcu rx queue Lorenzo Bianconi
2018-04-30 14:12 ` [RFC 02/18] mt76x2: move mt76x2_fw_header and mt76x2_patch_header definitions in mcu.h Lorenzo Bianconi
2018-04-30 14:12 ` [RFC 03/18] mt76x2: move utility routines in mt76x2.h Lorenzo Bianconi
2018-04-30 14:12 ` [RFC 04/18] mt76x2: introduce mt76x2_init_device routine Lorenzo Bianconi
2018-04-30 14:12 ` [RFC 05/18] mt76x2: move currently mt76x2u unsupported features to mt76x2_init Lorenzo Bianconi
2018-04-30 14:12 ` [RFC 06/18] mt76x2: introduce mt76x2_mac_load_tx_status routine Lorenzo Bianconi
2018-05-02 13:07 ` Stanislaw Gruszka
2018-05-02 13:34 ` Lorenzo Bianconi
2018-04-30 14:12 ` [RFC 07/18] mt76x2: add napi struct to mt76_rx_poll_complete/mt76_rx_complete signatures Lorenzo Bianconi
2018-04-30 14:12 ` [RFC 08/18] mt76x2: add buffer len to mt76x2_mac_write_txwi signature Lorenzo Bianconi
2018-04-30 14:12 ` [RFC 09/18] mt76: introduce tx_queue_skb function pointer in mt76_bus_ops Lorenzo Bianconi
2018-04-30 14:12 ` [RFC 10/18] mt76: introduce mt76x2-common module Lorenzo Bianconi
2018-04-30 14:12 ` [RFC 11/18] mt76: add mt76x2_tx_common to " Lorenzo Bianconi
2018-04-30 14:12 ` [RFC 12/18] mt76: add mt76x2_mac_common " Lorenzo Bianconi
2018-04-30 14:12 ` Lorenzo Bianconi [this message]
2018-04-30 14:12 ` [RFC 14/18] mt76: add mt76x2_common " Lorenzo Bianconi
2018-04-30 14:12 ` [RFC 15/18] mt76: add mt76x2_phy_common " Lorenzo Bianconi
2018-04-30 14:12 ` [RFC 16/18] mt76: move mt76x2_debugfs in mt76-common module Lorenzo Bianconi
2018-04-30 14:12 ` [RFC 17/18] mt76: add usb suppor to mt76 layer Lorenzo Bianconi
2018-04-30 14:12 ` [RFC 18/18] mt76: add driver code for MT76x2u based devices Lorenzo Bianconi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8693edc40f60a49ffd37261d299d42e33347093a.1525096206.git.lorenzo.bianconi@redhat.com \
--to=lorenzo.bianconi@redhat.com \
--cc=linux-wireless@vger.kernel.org \
--cc=nbd@nbd.name \
--cc=sgruszka@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.