* [GIT PULL] MMC updates for mmc-next for 3.15, take 1
@ 2014-02-14 11:09 Ulf Hansson
2014-02-23 15:33 ` Ulf Hansson
0 siblings, 1 reply; 3+ messages in thread
From: Ulf Hansson @ 2014-02-14 11:09 UTC (permalink / raw)
To: linux-mmc, Chris Ball; +Cc: Russell King - ARM Linux
Hi Chris,
I have collected some patches, all from the patchset:
mmc: Improve busy detection for MMC_CAP_WAIT_WHILE_BUSY
I have also included two patches for the mmci host driver, which I
would appreciate if you could carry through your tree since there are
a dependencies.
I have not yet got confirmation from Russell, that he's happy with
these, but I expect he will tell if not.
Kind regards
Ulf Hansson
The following changes since commit 7536d3f83aa42ba1a3b1c6b30c2b6d94a820cbb2:
mmc: core: Enable MMC_CAP2_CACHE_CTRL as default (2014-02-13 22:58:49 -0500)
are available in the git repository at:
git://git.linaro.org/people/ulfh/mmc.git mmc-next_for_chris
for you to fetch changes up to 13d0f23faabc2899a289630c42088c48d10a0872:
mmc: mmci: Enable support for busy detection for ux500 variant
(2014-02-14 09:33:16 +0100)
----------------------------------------------------------------
Ulf Hansson (13):
mmc: core: Rename max_discard_to to max_busy_timeout
mmc: core: Rename cmd_timeout_ms to busy_timeout
mmc: core: Add ignore_crc flag to __mmc_switch
mmc: core: Minor simplifications to __mmc_switch
mmc: core: Fixup busy detection for mmc switch operations
mmc: core: Use generic CMD6 time while switching to eMMC HS200 mode
mmc: core: Respect host's max_busy_timeout when sending sleep cmd
mmc: block: Use R1 responses for stop cmds for read requests
mmc: block: Implement card_busy_detect() for busy detection
mmc: block: Respect hw busy detection in card_busy_detect()
mmc: block: Fixup busy detection while invoking stop cmd at recovery
mmc: mmci: Handle CMD irq before DATA irq
mmc: mmci: Enable support for busy detection for ux500 variant
drivers/mmc/card/block.c | 178 ++++++++++++++++++++++++++++----------------
drivers/mmc/core/core.c | 11 +--
drivers/mmc/core/mmc.c | 34 ++++++---
drivers/mmc/core/mmc_ops.c | 64 ++++++++++------
drivers/mmc/host/mmci.c | 54 +++++++++++---
drivers/mmc/host/mmci.h | 2 +
drivers/mmc/host/sdhci.c | 10 +--
include/linux/mmc/core.h | 4 +-
include/linux/mmc/host.h | 2 +-
9 files changed, 241 insertions(+), 118 deletions(-)
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [GIT PULL] MMC updates for mmc-next for 3.15, take 1
2014-02-14 11:09 [GIT PULL] MMC updates for mmc-next for 3.15, take 1 Ulf Hansson
@ 2014-02-23 15:33 ` Ulf Hansson
2014-02-23 15:43 ` Chris Ball
0 siblings, 1 reply; 3+ messages in thread
From: Ulf Hansson @ 2014-02-23 15:33 UTC (permalink / raw)
To: linux-mmc, Chris Ball; +Cc: Russell King - ARM Linux
On 14 February 2014 12:09, Ulf Hansson <ulf.hansson@linaro.org> wrote:
> Hi Chris,
>
> I have collected some patches, all from the patchset:
>
> mmc: Improve busy detection for MMC_CAP_WAIT_WHILE_BUSY
>
> I have also included two patches for the mmci host driver, which I
> would appreciate if you could carry through your tree since there are
> a dependencies.
> I have not yet got confirmation from Russell, that he's happy with
> these, but I expect he will tell if not.
Hi Chris,
I would suggest we go ahead and merge this for 3.15, unless you have
any concerns with any of the patches of course.
Kind regards
Uffe
>
> Kind regards
> Ulf Hansson
>
>
> The following changes since commit 7536d3f83aa42ba1a3b1c6b30c2b6d94a820cbb2:
>
> mmc: core: Enable MMC_CAP2_CACHE_CTRL as default (2014-02-13 22:58:49 -0500)
>
> are available in the git repository at:
>
> git://git.linaro.org/people/ulfh/mmc.git mmc-next_for_chris
>
> for you to fetch changes up to 13d0f23faabc2899a289630c42088c48d10a0872:
>
> mmc: mmci: Enable support for busy detection for ux500 variant
> (2014-02-14 09:33:16 +0100)
>
> ----------------------------------------------------------------
> Ulf Hansson (13):
> mmc: core: Rename max_discard_to to max_busy_timeout
> mmc: core: Rename cmd_timeout_ms to busy_timeout
> mmc: core: Add ignore_crc flag to __mmc_switch
> mmc: core: Minor simplifications to __mmc_switch
> mmc: core: Fixup busy detection for mmc switch operations
> mmc: core: Use generic CMD6 time while switching to eMMC HS200 mode
> mmc: core: Respect host's max_busy_timeout when sending sleep cmd
> mmc: block: Use R1 responses for stop cmds for read requests
> mmc: block: Implement card_busy_detect() for busy detection
> mmc: block: Respect hw busy detection in card_busy_detect()
> mmc: block: Fixup busy detection while invoking stop cmd at recovery
> mmc: mmci: Handle CMD irq before DATA irq
> mmc: mmci: Enable support for busy detection for ux500 variant
>
> drivers/mmc/card/block.c | 178 ++++++++++++++++++++++++++++----------------
> drivers/mmc/core/core.c | 11 +--
> drivers/mmc/core/mmc.c | 34 ++++++---
> drivers/mmc/core/mmc_ops.c | 64 ++++++++++------
> drivers/mmc/host/mmci.c | 54 +++++++++++---
> drivers/mmc/host/mmci.h | 2 +
> drivers/mmc/host/sdhci.c | 10 +--
> include/linux/mmc/core.h | 4 +-
> include/linux/mmc/host.h | 2 +-
> 9 files changed, 241 insertions(+), 118 deletions(-)
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2014-02-23 15:43 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-02-14 11:09 [GIT PULL] MMC updates for mmc-next for 3.15, take 1 Ulf Hansson
2014-02-23 15:33 ` Ulf Hansson
2014-02-23 15:43 ` Chris Ball
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.