* [PATCH kvm-unit-tests v2 0/4] s390x: Add Protected VM support
@ 2020-09-23 13:47 ` Marc Hartmayer
0 siblings, 0 replies; 14+ messages in thread
From: Marc Hartmayer @ 2020-09-23 13:47 UTC (permalink / raw)
To: kvm
Cc: Thomas Huth, David Hildenbrand, Janosch Frank, Cornelia Huck,
Andrew Jones, Paolo Bonzini, linux-s390
Add support for Protected Virtual Machine (PVM) tests. For starting a
PVM guest we must be able to generate a PVM image by using the
`genprotimg` tool from the s390-tools collection. This requires the
ability to pass a machine-specific host-key document, so the option
`--host-key-document` is added to the configure script.
For everybody's convenience there is a branch:
https://gitlab.com/mhartmay/kvm-unit-tests/-/tree/pv_v2
Changelog:
v1 -> v2:
+ rebased
+ patches 1-3:
- add r-b from Conny, Andrew, and David
+ patch 4:
- add r-b from Janosch
- renamed ${testname} to $testname (David)
- fix `print_result` function calls and the arguments used
RFC v2 -> v1:
+ Rebased
+ patch 1:
- add r-b from Andrew
+ patch 2:
- add explicit dependency on config.mak (Andrew)
- add comment about the order of sourcing (Andrew)
+ patch 3:
- drop dummy function (Andrew)
- add arch_cmd hook function (Andrew)
+ patch 4:
- rephrased the documentation of the configure option (Conny)
- Skip test case if a PVM image wasn't built or the host-key document wasn't set (Conny)
- Run PV tests by default
RFC v1 -> RFC v2:
+ Remove `pv_support` option (Janosch, David)
+ Add some preliminary patches:
- move "testname guard"
- add support for architecture dependent functions
+ Add support for specifying a parmline file for the PV image
generation. This is necessary for the `selftest` because the
kernel cmdline set on the QEMU command line is ignored for PV
guests
Marc Hartmayer (4):
common.bash: run `cmd` only if a test case was found
scripts: add support for architecture dependent functions
run_tests/mkstandalone: add arch_cmd hook
s390x: add Protected VM support
README.md | 3 ++-
configure | 9 +++++++++
run_tests.sh | 3 ---
s390x/Makefile | 17 +++++++++++++++--
s390x/selftest.parmfile | 1 +
s390x/unittests.cfg | 1 +
scripts/common.bash | 21 +++++++++++++++++++--
scripts/mkstandalone.sh | 4 ----
scripts/s390x/func.bash | 36 ++++++++++++++++++++++++++++++++++++
9 files changed, 83 insertions(+), 12 deletions(-)
create mode 100644 s390x/selftest.parmfile
create mode 100644 scripts/s390x/func.bash
--
2.25.4
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH kvm-unit-tests v2 0/4] s390x: Add Protected VM support
@ 2020-09-23 13:47 ` Marc Hartmayer
0 siblings, 0 replies; 14+ messages in thread
From: Marc Hartmayer @ 2020-09-23 13:47 UTC (permalink / raw)
To: kvm
Cc: Thomas Huth, David Hildenbrand, Janosch Frank, Cornelia Huck,
Andrew Jones, Paolo Bonzini, linux-s390
Add support for Protected Virtual Machine (PVM) tests. For starting a
PVM guest we must be able to generate a PVM image by using the
`genprotimg` tool from the s390-tools collection. This requires the
ability to pass a machine-specific host-key document, so the option
`--host-key-document` is added to the configure script.
For everybody's convenience there is a branch:
https://gitlab.com/mhartmay/kvm-unit-tests/-/tree/pv_v2
Changelog:
v1 -> v2:
+ rebased
+ patches 1-3:
- add r-b from Conny, Andrew, and David
+ patch 4:
- add r-b from Janosch
- renamed ${testname} to $testname (David)
- fix `print_result` function calls and the arguments used
RFC v2 -> v1:
+ Rebased
+ patch 1:
- add r-b from Andrew
+ patch 2:
- add explicit dependency on config.mak (Andrew)
- add comment about the order of sourcing (Andrew)
+ patch 3:
- drop dummy function (Andrew)
- add arch_cmd hook function (Andrew)
+ patch 4:
- rephrased the documentation of the configure option (Conny)
- Skip test case if a PVM image wasn't built or the host-key document wasn't set (Conny)
- Run PV tests by default
RFC v1 -> RFC v2:
+ Remove `pv_support` option (Janosch, David)
+ Add some preliminary patches:
- move "testname guard"
- add support for architecture dependent functions
+ Add support for specifying a parmline file for the PV image
generation. This is necessary for the `selftest` because the
kernel cmdline set on the QEMU command line is ignored for PV
guests
Marc Hartmayer (4):
common.bash: run `cmd` only if a test case was found
scripts: add support for architecture dependent functions
run_tests/mkstandalone: add arch_cmd hook
s390x: add Protected VM support
README.md | 3 ++-
configure | 9 +++++++++
run_tests.sh | 3 ---
s390x/Makefile | 17 +++++++++++++++--
s390x/selftest.parmfile | 1 +
s390x/unittests.cfg | 1 +
scripts/common.bash | 21 +++++++++++++++++++--
scripts/mkstandalone.sh | 4 ----
scripts/s390x/func.bash | 36 ++++++++++++++++++++++++++++++++++++
9 files changed, 83 insertions(+), 12 deletions(-)
create mode 100644 s390x/selftest.parmfile
create mode 100644 scripts/s390x/func.bash
--
2.25.4
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH kvm-unit-tests v2 1/4] common.bash: run `cmd` only if a test case was found
2020-09-23 13:47 ` Marc Hartmayer
@ 2020-09-23 13:47 ` Marc Hartmayer
-1 siblings, 0 replies; 14+ messages in thread
From: Marc Hartmayer @ 2020-09-23 13:47 UTC (permalink / raw)
To: kvm
Cc: Thomas Huth, David Hildenbrand, Janosch Frank, Cornelia Huck,
Andrew Jones, Paolo Bonzini, linux-s390
It's only useful to run `cmd` in `for_each_unittest` if a test case
was found. This change allows us to remove the guards from the
functions `run_task` and `mkstandalone`.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
---
run_tests.sh | 3 ---
scripts/common.bash | 8 ++++++--
scripts/mkstandalone.sh | 4 ----
3 files changed, 6 insertions(+), 9 deletions(-)
diff --git a/run_tests.sh b/run_tests.sh
index fc4b3c23d886..12b63954721d 100755
--- a/run_tests.sh
+++ b/run_tests.sh
@@ -133,9 +133,6 @@ RUNTIME_log_stdout () {
function run_task()
{
local testname="$1"
- if [ -z "$testname" ]; then
- return
- fi
while (( $(jobs | wc -l) == $unittest_run_queues )); do
# wait for any background test to finish
diff --git a/scripts/common.bash b/scripts/common.bash
index 9a6ebbd7f287..96655c9ffd1f 100644
--- a/scripts/common.bash
+++ b/scripts/common.bash
@@ -17,7 +17,9 @@ function for_each_unittest()
while read -r -u $fd line; do
if [[ "$line" =~ ^\[(.*)\]$ ]]; then
- "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout"
+ if [ -n "${testname}" ]; then
+ "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout"
+ fi
testname=${BASH_REMATCH[1]}
smp=1
kernel=""
@@ -45,6 +47,8 @@ function for_each_unittest()
timeout=${BASH_REMATCH[1]}
fi
done
- "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout"
+ if [ -n "${testname}" ]; then
+ "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout"
+ fi
exec {fd}<&-
}
diff --git a/scripts/mkstandalone.sh b/scripts/mkstandalone.sh
index 9d506cc95072..cefdec30cb33 100755
--- a/scripts/mkstandalone.sh
+++ b/scripts/mkstandalone.sh
@@ -83,10 +83,6 @@ function mkstandalone()
{
local testname="$1"
- if [ -z "$testname" ]; then
- return
- fi
-
if [ -n "$one_testname" ] && [ "$testname" != "$one_testname" ]; then
return
fi
--
2.25.4
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH kvm-unit-tests v2 1/4] common.bash: run `cmd` only if a test case was found
@ 2020-09-23 13:47 ` Marc Hartmayer
0 siblings, 0 replies; 14+ messages in thread
From: Marc Hartmayer @ 2020-09-23 13:47 UTC (permalink / raw)
To: kvm
Cc: Thomas Huth, David Hildenbrand, Janosch Frank, Cornelia Huck,
Andrew Jones, Paolo Bonzini, linux-s390
It's only useful to run `cmd` in `for_each_unittest` if a test case
was found. This change allows us to remove the guards from the
functions `run_task` and `mkstandalone`.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
---
run_tests.sh | 3 ---
scripts/common.bash | 8 ++++++--
scripts/mkstandalone.sh | 4 ----
3 files changed, 6 insertions(+), 9 deletions(-)
diff --git a/run_tests.sh b/run_tests.sh
index fc4b3c23d886..12b63954721d 100755
--- a/run_tests.sh
+++ b/run_tests.sh
@@ -133,9 +133,6 @@ RUNTIME_log_stdout () {
function run_task()
{
local testname="$1"
- if [ -z "$testname" ]; then
- return
- fi
while (( $(jobs | wc -l) == $unittest_run_queues )); do
# wait for any background test to finish
diff --git a/scripts/common.bash b/scripts/common.bash
index 9a6ebbd7f287..96655c9ffd1f 100644
--- a/scripts/common.bash
+++ b/scripts/common.bash
@@ -17,7 +17,9 @@ function for_each_unittest()
while read -r -u $fd line; do
if [[ "$line" =~ ^\[(.*)\]$ ]]; then
- "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout"
+ if [ -n "${testname}" ]; then
+ "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout"
+ fi
testname=${BASH_REMATCH[1]}
smp=1
kernel=""
@@ -45,6 +47,8 @@ function for_each_unittest()
timeout=${BASH_REMATCH[1]}
fi
done
- "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout"
+ if [ -n "${testname}" ]; then
+ "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout"
+ fi
exec {fd}<&-
}
diff --git a/scripts/mkstandalone.sh b/scripts/mkstandalone.sh
index 9d506cc95072..cefdec30cb33 100755
--- a/scripts/mkstandalone.sh
+++ b/scripts/mkstandalone.sh
@@ -83,10 +83,6 @@ function mkstandalone()
{
local testname="$1"
- if [ -z "$testname" ]; then
- return
- fi
-
if [ -n "$one_testname" ] && [ "$testname" != "$one_testname" ]; then
return
fi
--
2.25.4
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH kvm-unit-tests v2 2/4] scripts: add support for architecture dependent functions
2020-09-23 13:47 ` Marc Hartmayer
@ 2020-09-23 13:47 ` Marc Hartmayer
-1 siblings, 0 replies; 14+ messages in thread
From: Marc Hartmayer @ 2020-09-23 13:47 UTC (permalink / raw)
To: kvm
Cc: Thomas Huth, David Hildenbrand, Janosch Frank, Cornelia Huck,
Andrew Jones, Paolo Bonzini, linux-s390
This is necessary to keep architecture dependent code separate from
common code.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
---
README.md | 3 ++-
scripts/common.bash | 8 ++++++++
2 files changed, 10 insertions(+), 1 deletion(-)
diff --git a/README.md b/README.md
index 48be206c6db1..24d4bdaaee0d 100644
--- a/README.md
+++ b/README.md
@@ -134,7 +134,8 @@ all unit tests.
## Directory structure
.: configure script, top-level Makefile, and run_tests.sh
- ./scripts: helper scripts for building and running tests
+ ./scripts: general architecture neutral helper scripts for building and running tests
+ ./scripts/<ARCH>: architecture dependent helper scripts for building and running tests
./lib: general architecture neutral services for the tests
./lib/<ARCH>: architecture dependent services for the tests
./<ARCH>: the sources of the tests and the created objects/images
diff --git a/scripts/common.bash b/scripts/common.bash
index 96655c9ffd1f..c7acdf14a835 100644
--- a/scripts/common.bash
+++ b/scripts/common.bash
@@ -1,3 +1,4 @@
+source config.mak
function for_each_unittest()
{
@@ -52,3 +53,10 @@ function for_each_unittest()
fi
exec {fd}<&-
}
+
+# The current file has to be the only file sourcing the arch helper
+# file
+ARCH_FUNC=scripts/${ARCH}/func.bash
+if [ -f "${ARCH_FUNC}" ]; then
+ source "${ARCH_FUNC}"
+fi
--
2.25.4
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH kvm-unit-tests v2 2/4] scripts: add support for architecture dependent functions
@ 2020-09-23 13:47 ` Marc Hartmayer
0 siblings, 0 replies; 14+ messages in thread
From: Marc Hartmayer @ 2020-09-23 13:47 UTC (permalink / raw)
To: kvm
Cc: Thomas Huth, David Hildenbrand, Janosch Frank, Cornelia Huck,
Andrew Jones, Paolo Bonzini, linux-s390
This is necessary to keep architecture dependent code separate from
common code.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
---
README.md | 3 ++-
scripts/common.bash | 8 ++++++++
2 files changed, 10 insertions(+), 1 deletion(-)
diff --git a/README.md b/README.md
index 48be206c6db1..24d4bdaaee0d 100644
--- a/README.md
+++ b/README.md
@@ -134,7 +134,8 @@ all unit tests.
## Directory structure
.: configure script, top-level Makefile, and run_tests.sh
- ./scripts: helper scripts for building and running tests
+ ./scripts: general architecture neutral helper scripts for building and running tests
+ ./scripts/<ARCH>: architecture dependent helper scripts for building and running tests
./lib: general architecture neutral services for the tests
./lib/<ARCH>: architecture dependent services for the tests
./<ARCH>: the sources of the tests and the created objects/images
diff --git a/scripts/common.bash b/scripts/common.bash
index 96655c9ffd1f..c7acdf14a835 100644
--- a/scripts/common.bash
+++ b/scripts/common.bash
@@ -1,3 +1,4 @@
+source config.mak
function for_each_unittest()
{
@@ -52,3 +53,10 @@ function for_each_unittest()
fi
exec {fd}<&-
}
+
+# The current file has to be the only file sourcing the arch helper
+# file
+ARCH_FUNC=scripts/${ARCH}/func.bash
+if [ -f "${ARCH_FUNC}" ]; then
+ source "${ARCH_FUNC}"
+fi
--
2.25.4
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH kvm-unit-tests v2 3/4] run_tests/mkstandalone: add arch_cmd hook
2020-09-23 13:47 ` Marc Hartmayer
@ 2020-09-23 13:47 ` Marc Hartmayer
-1 siblings, 0 replies; 14+ messages in thread
From: Marc Hartmayer @ 2020-09-23 13:47 UTC (permalink / raw)
To: kvm
Cc: Thomas Huth, David Hildenbrand, Janosch Frank, Cornelia Huck,
Andrew Jones, Paolo Bonzini, linux-s390
This allows us, for example, to auto generate a new test case based on
an existing test case.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
---
scripts/common.bash | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/scripts/common.bash b/scripts/common.bash
index c7acdf14a835..a6044b7c6c35 100644
--- a/scripts/common.bash
+++ b/scripts/common.bash
@@ -19,7 +19,7 @@ function for_each_unittest()
while read -r -u $fd line; do
if [[ "$line" =~ ^\[(.*)\]$ ]]; then
if [ -n "${testname}" ]; then
- "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout"
+ $(arch_cmd) "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout"
fi
testname=${BASH_REMATCH[1]}
smp=1
@@ -49,11 +49,16 @@ function for_each_unittest()
fi
done
if [ -n "${testname}" ]; then
- "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout"
+ $(arch_cmd) "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout"
fi
exec {fd}<&-
}
+function arch_cmd()
+{
+ [ "${ARCH_CMD}" ] && echo "${ARCH_CMD}"
+}
+
# The current file has to be the only file sourcing the arch helper
# file
ARCH_FUNC=scripts/${ARCH}/func.bash
--
2.25.4
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH kvm-unit-tests v2 3/4] run_tests/mkstandalone: add arch_cmd hook
@ 2020-09-23 13:47 ` Marc Hartmayer
0 siblings, 0 replies; 14+ messages in thread
From: Marc Hartmayer @ 2020-09-23 13:47 UTC (permalink / raw)
To: kvm
Cc: Thomas Huth, David Hildenbrand, Janosch Frank, Cornelia Huck,
Andrew Jones, Paolo Bonzini, linux-s390
This allows us, for example, to auto generate a new test case based on
an existing test case.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
---
scripts/common.bash | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/scripts/common.bash b/scripts/common.bash
index c7acdf14a835..a6044b7c6c35 100644
--- a/scripts/common.bash
+++ b/scripts/common.bash
@@ -19,7 +19,7 @@ function for_each_unittest()
while read -r -u $fd line; do
if [[ "$line" =~ ^\[(.*)\]$ ]]; then
if [ -n "${testname}" ]; then
- "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout"
+ $(arch_cmd) "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout"
fi
testname=${BASH_REMATCH[1]}
smp=1
@@ -49,11 +49,16 @@ function for_each_unittest()
fi
done
if [ -n "${testname}" ]; then
- "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout"
+ $(arch_cmd) "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout"
fi
exec {fd}<&-
}
+function arch_cmd()
+{
+ [ "${ARCH_CMD}" ] && echo "${ARCH_CMD}"
+}
+
# The current file has to be the only file sourcing the arch helper
# file
ARCH_FUNC=scripts/${ARCH}/func.bash
--
2.25.4
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH kvm-unit-tests v2 4/4] s390x: add Protected VM support
2020-09-23 13:47 ` Marc Hartmayer
@ 2020-09-23 13:47 ` Marc Hartmayer
-1 siblings, 0 replies; 14+ messages in thread
From: Marc Hartmayer @ 2020-09-23 13:47 UTC (permalink / raw)
To: kvm
Cc: Thomas Huth, David Hildenbrand, Janosch Frank, Cornelia Huck,
Andrew Jones, Paolo Bonzini, linux-s390
Add support for Protected Virtual Machine (PVM) tests. For starting a
PVM guest we must be able to generate a PVM image by using the
`genprotimg` tool from the s390-tools collection. This requires the
ability to pass a machine-specific host-key document, so the option
`--host-key-document` is added to the configure script.
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
---
configure | 9 +++++++++
s390x/Makefile | 17 +++++++++++++++--
s390x/selftest.parmfile | 1 +
s390x/unittests.cfg | 1 +
scripts/s390x/func.bash | 36 ++++++++++++++++++++++++++++++++++++
5 files changed, 62 insertions(+), 2 deletions(-)
create mode 100644 s390x/selftest.parmfile
create mode 100644 scripts/s390x/func.bash
diff --git a/configure b/configure
index f9305431a9cb..fe319233eb50 100755
--- a/configure
+++ b/configure
@@ -19,6 +19,7 @@ wa_divide=
vmm="qemu"
errata_force=0
erratatxt="$srcdir/errata.txt"
+host_key_document=
usage() {
cat <<-EOF
@@ -41,6 +42,9 @@ usage() {
no environ is provided by the user (enabled by default)
--erratatxt=FILE specify a file to use instead of errata.txt. Use
'--erratatxt=' to ensure no file is used.
+ --host-key-document=HOST_KEY_DOCUMENT
+ Specify the machine-specific host-key document for creating
+ a PVM image with 'genprotimg' (s390x only)
EOF
exit 1
}
@@ -93,6 +97,9 @@ while [[ "$1" = -* ]]; do
erratatxt=
[ "$arg" ] && erratatxt=$(eval realpath "$arg")
;;
+ --host-key-document)
+ host_key_document="$arg"
+ ;;
--help)
usage
;;
@@ -224,6 +231,8 @@ ENVIRON_DEFAULT=$environ_default
ERRATATXT=$erratatxt
U32_LONG_FMT=$u32_long
WA_DIVIDE=$wa_divide
+GENPROTIMG=${GENPROTIMG-genprotimg}
+HOST_KEY_DOCUMENT=$host_key_document
EOF
cat <<EOF > lib/config.h
diff --git a/s390x/Makefile b/s390x/Makefile
index c2213ad92e0d..b079a26dffb7 100644
--- a/s390x/Makefile
+++ b/s390x/Makefile
@@ -19,12 +19,19 @@ tests += $(TEST_DIR)/smp.elf
tests += $(TEST_DIR)/sclp.elf
tests += $(TEST_DIR)/css.elf
tests += $(TEST_DIR)/uv-guest.elf
-tests_binary = $(patsubst %.elf,%.bin,$(tests))
-all: directories test_cases test_cases_binary
+tests_binary = $(patsubst %.elf,%.bin,$(tests))
+ifneq ($(HOST_KEY_DOCUMENT),)
+tests_pv_binary = $(patsubst %.bin,%.pv.bin,$(tests_binary))
+else
+tests_pv_binary =
+endif
+
+all: directories test_cases test_cases_binary test_cases_pv
test_cases: $(tests)
test_cases_binary: $(tests_binary)
+test_cases_pv: $(tests_pv_binary)
CFLAGS += -std=gnu99
CFLAGS += -ffreestanding
@@ -73,6 +80,12 @@ FLATLIBS = $(libcflat)
%.bin: %.elf
$(OBJCOPY) -O binary $< $@
+%selftest.pv.bin: %selftest.bin $(HOST_KEY_DOCUMENT) $(patsubst %.pv.bin,%.parmfile,$@)
+ $(GENPROTIMG) --host-key-document $(HOST_KEY_DOCUMENT) --parmfile $(patsubst %.pv.bin,%.parmfile,$@) --no-verify --image $< -o $@
+
+%.pv.bin: %.bin $(HOST_KEY_DOCUMENT)
+ $(GENPROTIMG) --host-key-document $(HOST_KEY_DOCUMENT) --no-verify --image $< -o $@
+
arch_clean: asm_offsets_clean
$(RM) $(TEST_DIR)/*.{o,elf,bin} $(TEST_DIR)/.*.d lib/s390x/.*.d
diff --git a/s390x/selftest.parmfile b/s390x/selftest.parmfile
new file mode 100644
index 000000000000..5613931aa5c6
--- /dev/null
+++ b/s390x/selftest.parmfile
@@ -0,0 +1 @@
+test 123
\ No newline at end of file
diff --git a/s390x/unittests.cfg b/s390x/unittests.cfg
index 6d50c634770f..3feb8bcaa13d 100644
--- a/s390x/unittests.cfg
+++ b/s390x/unittests.cfg
@@ -21,6 +21,7 @@
[selftest-setup]
file = selftest.elf
groups = selftest
+# please keep the kernel cmdline in sync with $(TEST_DIR)/selftest.parmfile
extra_params = -append 'test 123'
[intercept]
diff --git a/scripts/s390x/func.bash b/scripts/s390x/func.bash
new file mode 100644
index 000000000000..4eae5e916c61
--- /dev/null
+++ b/scripts/s390x/func.bash
@@ -0,0 +1,36 @@
+# The file scripts/common.bash has to be the only file sourcing this
+# arch helper file
+source config.mak
+
+ARCH_CMD=arch_cmd_s390x
+
+function arch_cmd_s390x()
+{
+ local cmd=$1
+ local testname=$2
+ local groups=$3
+ local smp=$4
+ local kernel=$5
+ local opts=$6
+ local arch=$7
+ local check=$8
+ local accel=$9
+ local timeout=${10}
+
+ # run the normal test case
+ "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout"
+
+ # run PV test case
+ kernel=${kernel%.elf}.pv.bin
+ testname=${testname}_PV
+ if [ ! -f "${kernel}" ]; then
+ if [ -z "${HOST_KEY_DOCUMENT}" ]; then
+ print_result 'SKIP' $testname '' 'no host-key document specified'
+ return 2
+ fi
+
+ print_result 'SKIP' $testname '' 'PVM image was not created'
+ return 2
+ fi
+ "$cmd" "$testname" "$groups pv" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout"
+}
--
2.25.4
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH kvm-unit-tests v2 4/4] s390x: add Protected VM support
@ 2020-09-23 13:47 ` Marc Hartmayer
0 siblings, 0 replies; 14+ messages in thread
From: Marc Hartmayer @ 2020-09-23 13:47 UTC (permalink / raw)
To: kvm
Cc: Thomas Huth, David Hildenbrand, Janosch Frank, Cornelia Huck,
Andrew Jones, Paolo Bonzini, linux-s390
Add support for Protected Virtual Machine (PVM) tests. For starting a
PVM guest we must be able to generate a PVM image by using the
`genprotimg` tool from the s390-tools collection. This requires the
ability to pass a machine-specific host-key document, so the option
`--host-key-document` is added to the configure script.
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
---
configure | 9 +++++++++
s390x/Makefile | 17 +++++++++++++++--
s390x/selftest.parmfile | 1 +
s390x/unittests.cfg | 1 +
scripts/s390x/func.bash | 36 ++++++++++++++++++++++++++++++++++++
5 files changed, 62 insertions(+), 2 deletions(-)
create mode 100644 s390x/selftest.parmfile
create mode 100644 scripts/s390x/func.bash
diff --git a/configure b/configure
index f9305431a9cb..fe319233eb50 100755
--- a/configure
+++ b/configure
@@ -19,6 +19,7 @@ wa_divide=
vmm="qemu"
errata_force=0
erratatxt="$srcdir/errata.txt"
+host_key_document=
usage() {
cat <<-EOF
@@ -41,6 +42,9 @@ usage() {
no environ is provided by the user (enabled by default)
--erratatxt=FILE specify a file to use instead of errata.txt. Use
'--erratatxt=' to ensure no file is used.
+ --host-key-document=HOST_KEY_DOCUMENT
+ Specify the machine-specific host-key document for creating
+ a PVM image with 'genprotimg' (s390x only)
EOF
exit 1
}
@@ -93,6 +97,9 @@ while [[ "$1" = -* ]]; do
erratatxt=
[ "$arg" ] && erratatxt=$(eval realpath "$arg")
;;
+ --host-key-document)
+ host_key_document="$arg"
+ ;;
--help)
usage
;;
@@ -224,6 +231,8 @@ ENVIRON_DEFAULT=$environ_default
ERRATATXT=$erratatxt
U32_LONG_FMT=$u32_long
WA_DIVIDE=$wa_divide
+GENPROTIMG=${GENPROTIMG-genprotimg}
+HOST_KEY_DOCUMENT=$host_key_document
EOF
cat <<EOF > lib/config.h
diff --git a/s390x/Makefile b/s390x/Makefile
index c2213ad92e0d..b079a26dffb7 100644
--- a/s390x/Makefile
+++ b/s390x/Makefile
@@ -19,12 +19,19 @@ tests += $(TEST_DIR)/smp.elf
tests += $(TEST_DIR)/sclp.elf
tests += $(TEST_DIR)/css.elf
tests += $(TEST_DIR)/uv-guest.elf
-tests_binary = $(patsubst %.elf,%.bin,$(tests))
-all: directories test_cases test_cases_binary
+tests_binary = $(patsubst %.elf,%.bin,$(tests))
+ifneq ($(HOST_KEY_DOCUMENT),)
+tests_pv_binary = $(patsubst %.bin,%.pv.bin,$(tests_binary))
+else
+tests_pv_binary =
+endif
+
+all: directories test_cases test_cases_binary test_cases_pv
test_cases: $(tests)
test_cases_binary: $(tests_binary)
+test_cases_pv: $(tests_pv_binary)
CFLAGS += -std=gnu99
CFLAGS += -ffreestanding
@@ -73,6 +80,12 @@ FLATLIBS = $(libcflat)
%.bin: %.elf
$(OBJCOPY) -O binary $< $@
+%selftest.pv.bin: %selftest.bin $(HOST_KEY_DOCUMENT) $(patsubst %.pv.bin,%.parmfile,$@)
+ $(GENPROTIMG) --host-key-document $(HOST_KEY_DOCUMENT) --parmfile $(patsubst %.pv.bin,%.parmfile,$@) --no-verify --image $< -o $@
+
+%.pv.bin: %.bin $(HOST_KEY_DOCUMENT)
+ $(GENPROTIMG) --host-key-document $(HOST_KEY_DOCUMENT) --no-verify --image $< -o $@
+
arch_clean: asm_offsets_clean
$(RM) $(TEST_DIR)/*.{o,elf,bin} $(TEST_DIR)/.*.d lib/s390x/.*.d
diff --git a/s390x/selftest.parmfile b/s390x/selftest.parmfile
new file mode 100644
index 000000000000..5613931aa5c6
--- /dev/null
+++ b/s390x/selftest.parmfile
@@ -0,0 +1 @@
+test 123
\ No newline at end of file
diff --git a/s390x/unittests.cfg b/s390x/unittests.cfg
index 6d50c634770f..3feb8bcaa13d 100644
--- a/s390x/unittests.cfg
+++ b/s390x/unittests.cfg
@@ -21,6 +21,7 @@
[selftest-setup]
file = selftest.elf
groups = selftest
+# please keep the kernel cmdline in sync with $(TEST_DIR)/selftest.parmfile
extra_params = -append 'test 123'
[intercept]
diff --git a/scripts/s390x/func.bash b/scripts/s390x/func.bash
new file mode 100644
index 000000000000..4eae5e916c61
--- /dev/null
+++ b/scripts/s390x/func.bash
@@ -0,0 +1,36 @@
+# The file scripts/common.bash has to be the only file sourcing this
+# arch helper file
+source config.mak
+
+ARCH_CMD=arch_cmd_s390x
+
+function arch_cmd_s390x()
+{
+ local cmd=$1
+ local testname=$2
+ local groups=$3
+ local smp=$4
+ local kernel=$5
+ local opts=$6
+ local arch=$7
+ local check=$8
+ local accel=$9
+ local timeout=${10}
+
+ # run the normal test case
+ "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout"
+
+ # run PV test case
+ kernel=${kernel%.elf}.pv.bin
+ testname=${testname}_PV
+ if [ ! -f "${kernel}" ]; then
+ if [ -z "${HOST_KEY_DOCUMENT}" ]; then
+ print_result 'SKIP' $testname '' 'no host-key document specified'
+ return 2
+ fi
+
+ print_result 'SKIP' $testname '' 'PVM image was not created'
+ return 2
+ fi
+ "$cmd" "$testname" "$groups pv" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout"
+}
--
2.25.4
^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH kvm-unit-tests v2 4/4] s390x: add Protected VM support
2020-09-23 13:47 ` Marc Hartmayer
@ 2020-09-25 9:12 ` Cornelia Huck
-1 siblings, 0 replies; 14+ messages in thread
From: Cornelia Huck @ 2020-09-25 9:12 UTC (permalink / raw)
To: Marc Hartmayer
Cc: kvm, Thomas Huth, David Hildenbrand, Janosch Frank, Andrew Jones,
Paolo Bonzini, linux-s390
On Wed, 23 Sep 2020 15:47:58 +0200
Marc Hartmayer <mhartmay@linux.ibm.com> wrote:
> Add support for Protected Virtual Machine (PVM) tests. For starting a
> PVM guest we must be able to generate a PVM image by using the
> `genprotimg` tool from the s390-tools collection. This requires the
> ability to pass a machine-specific host-key document, so the option
> `--host-key-document` is added to the configure script.
>
> Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
> Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
> ---
> configure | 9 +++++++++
> s390x/Makefile | 17 +++++++++++++++--
> s390x/selftest.parmfile | 1 +
> s390x/unittests.cfg | 1 +
> scripts/s390x/func.bash | 36 ++++++++++++++++++++++++++++++++++++
> 5 files changed, 62 insertions(+), 2 deletions(-)
> create mode 100644 s390x/selftest.parmfile
> create mode 100644 scripts/s390x/func.bash
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH kvm-unit-tests v2 4/4] s390x: add Protected VM support
@ 2020-09-25 9:12 ` Cornelia Huck
0 siblings, 0 replies; 14+ messages in thread
From: Cornelia Huck @ 2020-09-25 9:12 UTC (permalink / raw)
To: Marc Hartmayer
Cc: kvm, Thomas Huth, David Hildenbrand, Janosch Frank, Andrew Jones,
Paolo Bonzini, linux-s390
On Wed, 23 Sep 2020 15:47:58 +0200
Marc Hartmayer <mhartmay@linux.ibm.com> wrote:
> Add support for Protected Virtual Machine (PVM) tests. For starting a
> PVM guest we must be able to generate a PVM image by using the
> `genprotimg` tool from the s390-tools collection. This requires the
> ability to pass a machine-specific host-key document, so the option
> `--host-key-document` is added to the configure script.
>
> Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
> Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
> ---
> configure | 9 +++++++++
> s390x/Makefile | 17 +++++++++++++++--
> s390x/selftest.parmfile | 1 +
> s390x/unittests.cfg | 1 +
> scripts/s390x/func.bash | 36 ++++++++++++++++++++++++++++++++++++
> 5 files changed, 62 insertions(+), 2 deletions(-)
> create mode 100644 s390x/selftest.parmfile
> create mode 100644 scripts/s390x/func.bash
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH kvm-unit-tests v2 4/4] s390x: add Protected VM support
2020-09-23 13:47 ` Marc Hartmayer
(?)
(?)
@ 2020-09-28 11:44 ` Thomas Huth
2020-09-28 12:33 ` Marc Hartmayer
-1 siblings, 1 reply; 14+ messages in thread
From: Thomas Huth @ 2020-09-28 11:44 UTC (permalink / raw)
To: Marc Hartmayer, kvm
Cc: David Hildenbrand, Janosch Frank, Cornelia Huck, Andrew Jones,
Paolo Bonzini, linux-s390
On 23/09/2020 15.47, Marc Hartmayer wrote:
> Add support for Protected Virtual Machine (PVM) tests. For starting a
> PVM guest we must be able to generate a PVM image by using the
> `genprotimg` tool from the s390-tools collection. This requires the
> ability to pass a machine-specific host-key document, so the option
> `--host-key-document` is added to the configure script.
>
> Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
> Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
> ---
> configure | 9 +++++++++
> s390x/Makefile | 17 +++++++++++++++--
> s390x/selftest.parmfile | 1 +
> s390x/unittests.cfg | 1 +
> scripts/s390x/func.bash | 36 ++++++++++++++++++++++++++++++++++++
> 5 files changed, 62 insertions(+), 2 deletions(-)
> create mode 100644 s390x/selftest.parmfile
> create mode 100644 scripts/s390x/func.bash
>
> diff --git a/configure b/configure
> index f9305431a9cb..fe319233eb50 100755
> --- a/configure
> +++ b/configure
> @@ -19,6 +19,7 @@ wa_divide=
> vmm="qemu"
> errata_force=0
> erratatxt="$srcdir/errata.txt"
> +host_key_document=
>
> usage() {
> cat <<-EOF
> @@ -41,6 +42,9 @@ usage() {
> no environ is provided by the user (enabled by default)
> --erratatxt=FILE specify a file to use instead of errata.txt. Use
> '--erratatxt=' to ensure no file is used.
> + --host-key-document=HOST_KEY_DOCUMENT
> + Specify the machine-specific host-key document for creating
> + a PVM image with 'genprotimg' (s390x only)
> EOF
> exit 1
> }
> @@ -93,6 +97,9 @@ while [[ "$1" = -* ]]; do
> erratatxt=
> [ "$arg" ] && erratatxt=$(eval realpath "$arg")
> ;;
> + --host-key-document)
> + host_key_document="$arg"
> + ;;
> --help)
> usage
> ;;
> @@ -224,6 +231,8 @@ ENVIRON_DEFAULT=$environ_default
> ERRATATXT=$erratatxt
> U32_LONG_FMT=$u32_long
> WA_DIVIDE=$wa_divide
> +GENPROTIMG=${GENPROTIMG-genprotimg}
> +HOST_KEY_DOCUMENT=$host_key_document
> EOF
>
> cat <<EOF > lib/config.h
> diff --git a/s390x/Makefile b/s390x/Makefile
> index c2213ad92e0d..b079a26dffb7 100644
> --- a/s390x/Makefile
> +++ b/s390x/Makefile
> @@ -19,12 +19,19 @@ tests += $(TEST_DIR)/smp.elf
> tests += $(TEST_DIR)/sclp.elf
> tests += $(TEST_DIR)/css.elf
> tests += $(TEST_DIR)/uv-guest.elf
> -tests_binary = $(patsubst %.elf,%.bin,$(tests))
>
> -all: directories test_cases test_cases_binary
> +tests_binary = $(patsubst %.elf,%.bin,$(tests))
> +ifneq ($(HOST_KEY_DOCUMENT),)
> +tests_pv_binary = $(patsubst %.bin,%.pv.bin,$(tests_binary))
> +else
> +tests_pv_binary =
> +endif
> +
> +all: directories test_cases test_cases_binary test_cases_pv
>
> test_cases: $(tests)
> test_cases_binary: $(tests_binary)
> +test_cases_pv: $(tests_pv_binary)
>
> CFLAGS += -std=gnu99
> CFLAGS += -ffreestanding
> @@ -73,6 +80,12 @@ FLATLIBS = $(libcflat)
> %.bin: %.elf
> $(OBJCOPY) -O binary $< $@
>
> +%selftest.pv.bin: %selftest.bin $(HOST_KEY_DOCUMENT) $(patsubst %.pv.bin,%.parmfile,$@)
> + $(GENPROTIMG) --host-key-document $(HOST_KEY_DOCUMENT) --parmfile $(patsubst %.pv.bin,%.parmfile,$@) --no-verify --image $< -o $@
> +
> +%.pv.bin: %.bin $(HOST_KEY_DOCUMENT)
> + $(GENPROTIMG) --host-key-document $(HOST_KEY_DOCUMENT) --no-verify --image $< -o $@
> +
> arch_clean: asm_offsets_clean
> $(RM) $(TEST_DIR)/*.{o,elf,bin} $(TEST_DIR)/.*.d lib/s390x/.*.d
>
> diff --git a/s390x/selftest.parmfile b/s390x/selftest.parmfile
> new file mode 100644
> index 000000000000..5613931aa5c6
> --- /dev/null
> +++ b/s390x/selftest.parmfile
> @@ -0,0 +1 @@
> +test 123
> \ No newline at end of file
> diff --git a/s390x/unittests.cfg b/s390x/unittests.cfg
> index 6d50c634770f..3feb8bcaa13d 100644
> --- a/s390x/unittests.cfg
> +++ b/s390x/unittests.cfg
> @@ -21,6 +21,7 @@
> [selftest-setup]
> file = selftest.elf
> groups = selftest
> +# please keep the kernel cmdline in sync with $(TEST_DIR)/selftest.parmfile
> extra_params = -append 'test 123'
>
> [intercept]
> diff --git a/scripts/s390x/func.bash b/scripts/s390x/func.bash
> new file mode 100644
> index 000000000000..4eae5e916c61
> --- /dev/null
> +++ b/scripts/s390x/func.bash
> @@ -0,0 +1,36 @@
> +# The file scripts/common.bash has to be the only file sourcing this
> +# arch helper file
> +source config.mak
> +
> +ARCH_CMD=arch_cmd_s390x
> +
> +function arch_cmd_s390x()
> +{
> + local cmd=$1
> + local testname=$2
> + local groups=$3
> + local smp=$4
> + local kernel=$5
> + local opts=$6
> + local arch=$7
> + local check=$8
> + local accel=$9
> + local timeout=${10}
> +
> + # run the normal test case
> + "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout"
> +
> + # run PV test case
> + kernel=${kernel%.elf}.pv.bin
> + testname=${testname}_PV
> + if [ ! -f "${kernel}" ]; then
> + if [ -z "${HOST_KEY_DOCUMENT}" ]; then
> + print_result 'SKIP' $testname '' 'no host-key document specified'
I wonder whether we should not simply stay silent here ... ? Currently
the output gets quite spoiled with a lot of these "no host-key document
specified" messages when PV is not in use.
If you agree, I could drop this line when picking up the patch (no need
to respin just because of this).
Thomas
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH kvm-unit-tests v2 4/4] s390x: add Protected VM support
2020-09-28 11:44 ` Thomas Huth
@ 2020-09-28 12:33 ` Marc Hartmayer
0 siblings, 0 replies; 14+ messages in thread
From: Marc Hartmayer @ 2020-09-28 12:33 UTC (permalink / raw)
To: Thomas Huth, Marc Hartmayer, kvm
Cc: David Hildenbrand, Janosch Frank, Cornelia Huck, Andrew Jones,
Paolo Bonzini, linux-s390
On Mon, Sep 28, 2020 at 01:44 PM +0200, Thomas Huth <thuth@redhat.com> wrote:
> On 23/09/2020 15.47, Marc Hartmayer wrote:
>> Add support for Protected Virtual Machine (PVM) tests. For starting a
>> PVM guest we must be able to generate a PVM image by using the
>> `genprotimg` tool from the s390-tools collection. This requires the
>> ability to pass a machine-specific host-key document, so the option
>> `--host-key-document` is added to the configure script.
>>
>> Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
>> Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
>> ---
>> configure | 9 +++++++++
>> s390x/Makefile | 17 +++++++++++++++--
>> s390x/selftest.parmfile | 1 +
>> s390x/unittests.cfg | 1 +
>> scripts/s390x/func.bash | 36 ++++++++++++++++++++++++++++++++++++
>> 5 files changed, 62 insertions(+), 2 deletions(-)
>> create mode 100644 s390x/selftest.parmfile
>> create mode 100644 scripts/s390x/func.bash
>>
>> diff --git a/configure b/configure
>> index f9305431a9cb..fe319233eb50 100755
>> --- a/configure
>> +++ b/configure
>> @@ -19,6 +19,7 @@ wa_divide=
>> vmm="qemu"
>> errata_force=0
>> erratatxt="$srcdir/errata.txt"
>> +host_key_document=
>>
>> usage() {
>> cat <<-EOF
>> @@ -41,6 +42,9 @@ usage() {
>> no environ is provided by the user (enabled by default)
>> --erratatxt=FILE specify a file to use instead of errata.txt. Use
>> '--erratatxt=' to ensure no file is used.
>> + --host-key-document=HOST_KEY_DOCUMENT
>> + Specify the machine-specific host-key document for creating
>> + a PVM image with 'genprotimg' (s390x only)
>> EOF
>> exit 1
>> }
>> @@ -93,6 +97,9 @@ while [[ "$1" = -* ]]; do
>> erratatxt=
>> [ "$arg" ] && erratatxt=$(eval realpath "$arg")
>> ;;
>> + --host-key-document)
>> + host_key_document="$arg"
>> + ;;
>> --help)
>> usage
>> ;;
>> @@ -224,6 +231,8 @@ ENVIRON_DEFAULT=$environ_default
>> ERRATATXT=$erratatxt
>> U32_LONG_FMT=$u32_long
>> WA_DIVIDE=$wa_divide
>> +GENPROTIMG=${GENPROTIMG-genprotimg}
>> +HOST_KEY_DOCUMENT=$host_key_document
>> EOF
>>
>> cat <<EOF > lib/config.h
>> diff --git a/s390x/Makefile b/s390x/Makefile
>> index c2213ad92e0d..b079a26dffb7 100644
>> --- a/s390x/Makefile
>> +++ b/s390x/Makefile
>> @@ -19,12 +19,19 @@ tests += $(TEST_DIR)/smp.elf
>> tests += $(TEST_DIR)/sclp.elf
>> tests += $(TEST_DIR)/css.elf
>> tests += $(TEST_DIR)/uv-guest.elf
>> -tests_binary = $(patsubst %.elf,%.bin,$(tests))
>>
>> -all: directories test_cases test_cases_binary
>> +tests_binary = $(patsubst %.elf,%.bin,$(tests))
>> +ifneq ($(HOST_KEY_DOCUMENT),)
>> +tests_pv_binary = $(patsubst %.bin,%.pv.bin,$(tests_binary))
>> +else
>> +tests_pv_binary =
>> +endif
>> +
>> +all: directories test_cases test_cases_binary test_cases_pv
>>
>> test_cases: $(tests)
>> test_cases_binary: $(tests_binary)
>> +test_cases_pv: $(tests_pv_binary)
>>
>> CFLAGS += -std=gnu99
>> CFLAGS += -ffreestanding
>> @@ -73,6 +80,12 @@ FLATLIBS = $(libcflat)
>> %.bin: %.elf
>> $(OBJCOPY) -O binary $< $@
>>
>> +%selftest.pv.bin: %selftest.bin $(HOST_KEY_DOCUMENT) $(patsubst %.pv.bin,%.parmfile,$@)
>> + $(GENPROTIMG) --host-key-document $(HOST_KEY_DOCUMENT) --parmfile $(patsubst %.pv.bin,%.parmfile,$@) --no-verify --image $< -o $@
>> +
>> +%.pv.bin: %.bin $(HOST_KEY_DOCUMENT)
>> + $(GENPROTIMG) --host-key-document $(HOST_KEY_DOCUMENT) --no-verify --image $< -o $@
>> +
>> arch_clean: asm_offsets_clean
>> $(RM) $(TEST_DIR)/*.{o,elf,bin} $(TEST_DIR)/.*.d lib/s390x/.*.d
>>
>> diff --git a/s390x/selftest.parmfile b/s390x/selftest.parmfile
>> new file mode 100644
>> index 000000000000..5613931aa5c6
>> --- /dev/null
>> +++ b/s390x/selftest.parmfile
>> @@ -0,0 +1 @@
>> +test 123
>> \ No newline at end of file
>> diff --git a/s390x/unittests.cfg b/s390x/unittests.cfg
>> index 6d50c634770f..3feb8bcaa13d 100644
>> --- a/s390x/unittests.cfg
>> +++ b/s390x/unittests.cfg
>> @@ -21,6 +21,7 @@
>> [selftest-setup]
>> file = selftest.elf
>> groups = selftest
>> +# please keep the kernel cmdline in sync with $(TEST_DIR)/selftest.parmfile
>> extra_params = -append 'test 123'
>>
>> [intercept]
>> diff --git a/scripts/s390x/func.bash b/scripts/s390x/func.bash
>> new file mode 100644
>> index 000000000000..4eae5e916c61
>> --- /dev/null
>> +++ b/scripts/s390x/func.bash
>> @@ -0,0 +1,36 @@
>> +# The file scripts/common.bash has to be the only file sourcing this
>> +# arch helper file
>> +source config.mak
>> +
>> +ARCH_CMD=arch_cmd_s390x
>> +
>> +function arch_cmd_s390x()
>> +{
>> + local cmd=$1
>> + local testname=$2
>> + local groups=$3
>> + local smp=$4
>> + local kernel=$5
>> + local opts=$6
>> + local arch=$7
>> + local check=$8
>> + local accel=$9
>> + local timeout=${10}
>> +
>> + # run the normal test case
>> + "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout"
>> +
>> + # run PV test case
>> + kernel=${kernel%.elf}.pv.bin
>> + testname=${testname}_PV
>> + if [ ! -f "${kernel}" ]; then
>> + if [ -z "${HOST_KEY_DOCUMENT}" ]; then
>> + print_result 'SKIP' $testname '' 'no host-key document specified'
>
> I wonder whether we should not simply stay silent here ... ? Currently
> the output gets quite spoiled with a lot of these "no host-key document
> specified" messages when PV is not in use.
> If you agree, I could drop this line when picking up the patch (no need
> to respin just because of this).
Right… yes, please remove it - thanks!
>
> Thomas
>
--
Kind regards / Beste Grüße
Marc Hartmayer
IBM Deutschland Research & Development GmbH
Vorsitzender des Aufsichtsrats: Gregor Pillen
Geschäftsführung: Dirk Wittkopp
Sitz der Gesellschaft: Böblingen
Registergericht: Amtsgericht Stuttgart, HRB 243294
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2020-09-28 12:33 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-23 13:47 [PATCH kvm-unit-tests v2 0/4] s390x: Add Protected VM support Marc Hartmayer
2020-09-23 13:47 ` Marc Hartmayer
2020-09-23 13:47 ` [PATCH kvm-unit-tests v2 1/4] common.bash: run `cmd` only if a test case was found Marc Hartmayer
2020-09-23 13:47 ` Marc Hartmayer
2020-09-23 13:47 ` [PATCH kvm-unit-tests v2 2/4] scripts: add support for architecture dependent functions Marc Hartmayer
2020-09-23 13:47 ` Marc Hartmayer
2020-09-23 13:47 ` [PATCH kvm-unit-tests v2 3/4] run_tests/mkstandalone: add arch_cmd hook Marc Hartmayer
2020-09-23 13:47 ` Marc Hartmayer
2020-09-23 13:47 ` [PATCH kvm-unit-tests v2 4/4] s390x: add Protected VM support Marc Hartmayer
2020-09-23 13:47 ` Marc Hartmayer
2020-09-25 9:12 ` Cornelia Huck
2020-09-25 9:12 ` Cornelia Huck
2020-09-28 11:44 ` Thomas Huth
2020-09-28 12:33 ` Marc Hartmayer
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.