[PATCH 20/25] arm: kirkwood: dts: Remove leading 0x and 0s from bindings notation

[PATCH 20/25] arm: kirkwood: dts: Remove leading 0x and 0s from bindings notation

[Mathieu Malaterre]

Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:

Warning (unit_address_format): Node /XXX unit name should not have leading "0x"

and

Warning (unit_address_format): Node /XXX unit name should not have leading 0s

Converted using the following command:

find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C

For simplicity, two sed expressions were used to solve each warnings separately.

To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:

https://elinux.org/Device_Tree_Linux#Linux_conventions

This will solve as a side effect warning:

Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"

This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")

Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
---
 arch/arm/boot/dts/kirkwood-linksys-viper.dts | 10 +++++-----
 arch/arm/boot/dts/kirkwood-ns2-common.dtsi   |  2 +-
 arch/arm/boot/dts/kirkwood-ts219.dtsi        |  2 +-
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
index df7851820507..f21a50dd9869 100644
--- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
@@ -157,7 +157,7 @@
 			reg = <0x80000 0x20000>;
 		};
 
-		partition@A0000 {
+		partition@a0000 {
 			label = "s_env";
 			reg = <0xA0000 0x20000>;
 		};
@@ -167,17 +167,17 @@
 			reg = <0x200000 0x2A0000>;
 		};
 
-		partition@4A0000 {
+		partition@4a0000 {
 			label = "rootfs";
 			reg = <0x4A0000 0x1760000>;
 		};
 
-		partition@1C00000 {
+		partition@1c00000 {
 			label = "alt_kernel";
 			reg = <0x1C00000 0x2A0000>;
 		};
 
-		partition@1EA0000 {
+		partition@1ea0000 {
 			label = "alt_rootfs";
 			reg = <0x1EA0000 0x1760000>;
 		};
@@ -187,7 +187,7 @@
 			reg = <0x3600000 0x4A00000>;
 		};
 
-		partition@C0000 {
+		partition@c0000 {
 			label = "unused";
 			reg = <0xC0000 0x140000>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
index 51530ea86622..dc52e3ca7536 100644
--- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
@@ -84,7 +84,7 @@
 &mdio {
 	status = "okay";
 
-	ethphy0: ethernet-phy@X {
+	ethphy0: ethernet-phy@x {
                 /* overwrite reg property in board file */
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
index a88eb22070a1..1d3a7fbe1ca9 100644
--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
@@ -85,7 +85,7 @@
 &mdio {
 	status = "okay";
 
-	ethphy0: ethernet-phy@X {
+	ethphy0: ethernet-phy@x {
                 /* overwrite reg property in board file */
 	};
 };
-- 
2.11.0

[PATCH 20/25] arm: kirkwood: dts: Remove leading 0x and 0s from bindings notation

[Mathieu Malaterre]

Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:

Warning (unit_address_format): Node /XXX unit name should not have leading "0x"

and

Warning (unit_address_format): Node /XXX unit name should not have leading 0s

Converted using the following command:

find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C

For simplicity, two sed expressions were used to solve each warnings separately.

To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:

https://elinux.org/Device_Tree_Linux#Linux_conventions

This will solve as a side effect warning:

Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"

This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")

Reported-by: David Daney <ddaney-M3mlKVOIwJVv6pq1l3V1OdBPR1lH4CV8@public.gmane.org>
Suggested-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Mathieu Malaterre <malat-8fiUuRrzOP0dnm+yROfE0A@public.gmane.org>
---
 arch/arm/boot/dts/kirkwood-linksys-viper.dts | 10 +++++-----
 arch/arm/boot/dts/kirkwood-ns2-common.dtsi   |  2 +-
 arch/arm/boot/dts/kirkwood-ts219.dtsi        |  2 +-
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
index df7851820507..f21a50dd9869 100644
--- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
@@ -157,7 +157,7 @@
 			reg = <0x80000 0x20000>;
 		};
 
-		partition@A0000 {
+		partition@a0000 {
 			label = "s_env";
 			reg = <0xA0000 0x20000>;
 		};
@@ -167,17 +167,17 @@
 			reg = <0x200000 0x2A0000>;
 		};
 
-		partition@4A0000 {
+		partition@4a0000 {
 			label = "rootfs";
 			reg = <0x4A0000 0x1760000>;
 		};
 
-		partition@1C00000 {
+		partition@1c00000 {
 			label = "alt_kernel";
 			reg = <0x1C00000 0x2A0000>;
 		};
 
-		partition@1EA0000 {
+		partition@1ea0000 {
 			label = "alt_rootfs";
 			reg = <0x1EA0000 0x1760000>;
 		};
@@ -187,7 +187,7 @@
 			reg = <0x3600000 0x4A00000>;
 		};
 
-		partition@C0000 {
+		partition@c0000 {
 			label = "unused";
 			reg = <0xC0000 0x140000>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
index 51530ea86622..dc52e3ca7536 100644
--- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
@@ -84,7 +84,7 @@
 &mdio {
 	status = "okay";
 
-	ethphy0: ethernet-phy@X {
+	ethphy0: ethernet-phy@x {
                 /* overwrite reg property in board file */
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
index a88eb22070a1..1d3a7fbe1ca9 100644
--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
@@ -85,7 +85,7 @@
 &mdio {
 	status = "okay";
 
-	ethphy0: ethernet-phy@X {
+	ethphy0: ethernet-phy@x {
                 /* overwrite reg property in board file */
 	};
 };
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 20/25] arm: kirkwood: dts: Remove leading 0x and 0s from bindings notation

[Mathieu Malaterre]

Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:

Warning (unit_address_format): Node /XXX unit name should not have leading "0x"

and

Warning (unit_address_format): Node /XXX unit name should not have leading 0s

Converted using the following command:

find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C

For simplicity, two sed expressions were used to solve each warnings separately.

To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:

https://elinux.org/Device_Tree_Linux#Linux_conventions

This will solve as a side effect warning:

Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"

This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")

Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
---
 arch/arm/boot/dts/kirkwood-linksys-viper.dts | 10 +++++-----
 arch/arm/boot/dts/kirkwood-ns2-common.dtsi   |  2 +-
 arch/arm/boot/dts/kirkwood-ts219.dtsi        |  2 +-
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
index df7851820507..f21a50dd9869 100644
--- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
@@ -157,7 +157,7 @@
 			reg = <0x80000 0x20000>;
 		};
 
-		partition at A0000 {
+		partition at a0000 {
 			label = "s_env";
 			reg = <0xA0000 0x20000>;
 		};
@@ -167,17 +167,17 @@
 			reg = <0x200000 0x2A0000>;
 		};
 
-		partition at 4A0000 {
+		partition at 4a0000 {
 			label = "rootfs";
 			reg = <0x4A0000 0x1760000>;
 		};
 
-		partition at 1C00000 {
+		partition at 1c00000 {
 			label = "alt_kernel";
 			reg = <0x1C00000 0x2A0000>;
 		};
 
-		partition at 1EA0000 {
+		partition at 1ea0000 {
 			label = "alt_rootfs";
 			reg = <0x1EA0000 0x1760000>;
 		};
@@ -187,7 +187,7 @@
 			reg = <0x3600000 0x4A00000>;
 		};
 
-		partition at C0000 {
+		partition at c0000 {
 			label = "unused";
 			reg = <0xC0000 0x140000>;
 		};
diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
index 51530ea86622..dc52e3ca7536 100644
--- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
@@ -84,7 +84,7 @@
 &mdio {
 	status = "okay";
 
-	ethphy0: ethernet-phy at X {
+	ethphy0: ethernet-phy at x {
                 /* overwrite reg property in board file */
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
index a88eb22070a1..1d3a7fbe1ca9 100644
--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
@@ -85,7 +85,7 @@
 &mdio {
 	status = "okay";
 
-	ethphy0: ethernet-phy at X {
+	ethphy0: ethernet-phy at x {
                 /* overwrite reg property in board file */
 	};
 };
-- 
2.11.0

Re: [PATCH 20/25] arm: kirkwood: dts: Remove leading 0x and 0s from bindings notation

[Andrew Lunn]

> Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
> 
> and
> 
> Warning (unit_address_format): Node /XXX unit name should not have leading 0s

Humm, it actually looks like the compiler is broken. None of the lines
you are changing in this, or the orion5x file, have 0x or leading 0.

       Andrew

[PATCH 20/25] arm: kirkwood: dts: Remove leading 0x and 0s from bindings notation

[Andrew Lunn]

> Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
> 
> and
> 
> Warning (unit_address_format): Node /XXX unit name should not have leading 0s

Humm, it actually looks like the compiler is broken. None of the lines
you are changing in this, or the orion5x file, have 0x or leading 0.

       Andrew

[PATCH v2] arm: kirkwood: dts: Use lower case for bindings notation

[Mathieu Malaterre]

Improve the DTS files using lower case to fix the following dtc warnings:

Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"

Converted using the following command:

find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C

For simplicity, two sed expressions were used to solve each warnings separately.

To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:

https://elinux.org/Device_Tree_Linux#Linux_conventions

This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")

Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
---
v2: Fix the original template message since it was completely misleading for kirkwood subarch.

 arch/arm/boot/dts/kirkwood-linksys-viper.dts | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
index df7851820507..f21a50dd9869 100644
--- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
@@ -157,7 +157,7 @@
 			reg = <0x80000 0x20000>;
 		};
 
-		partition@A0000 {
+		partition@a0000 {
 			label = "s_env";
 			reg = <0xA0000 0x20000>;
 		};
@@ -167,17 +167,17 @@
 			reg = <0x200000 0x2A0000>;
 		};
 
-		partition@4A0000 {
+		partition@4a0000 {
 			label = "rootfs";
 			reg = <0x4A0000 0x1760000>;
 		};
 
-		partition@1C00000 {
+		partition@1c00000 {
 			label = "alt_kernel";
 			reg = <0x1C00000 0x2A0000>;
 		};
 
-		partition@1EA0000 {
+		partition@1ea0000 {
 			label = "alt_rootfs";
 			reg = <0x1EA0000 0x1760000>;
 		};
@@ -187,7 +187,7 @@
 			reg = <0x3600000 0x4A00000>;
 		};
 
-		partition@C0000 {
+		partition@c0000 {
 			label = "unused";
 			reg = <0xC0000 0x140000>;
 		};
-- 
2.11.0

[PATCH v2] arm: kirkwood: dts: Use lower case for bindings notation

[Mathieu Malaterre]

Improve the DTS files using lower case to fix the following dtc warnings:

Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"

Converted using the following command:

find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C

For simplicity, two sed expressions were used to solve each warnings separately.

To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:

https://elinux.org/Device_Tree_Linux#Linux_conventions

This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")

Reported-by: David Daney <ddaney-M3mlKVOIwJVv6pq1l3V1OdBPR1lH4CV8@public.gmane.org>
Suggested-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Mathieu Malaterre <malat-8fiUuRrzOP0dnm+yROfE0A@public.gmane.org>
---
v2: Fix the original template message since it was completely misleading for kirkwood subarch.

 arch/arm/boot/dts/kirkwood-linksys-viper.dts | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
index df7851820507..f21a50dd9869 100644
--- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
@@ -157,7 +157,7 @@
 			reg = <0x80000 0x20000>;
 		};
 
-		partition@A0000 {
+		partition@a0000 {
 			label = "s_env";
 			reg = <0xA0000 0x20000>;
 		};
@@ -167,17 +167,17 @@
 			reg = <0x200000 0x2A0000>;
 		};
 
-		partition@4A0000 {
+		partition@4a0000 {
 			label = "rootfs";
 			reg = <0x4A0000 0x1760000>;
 		};
 
-		partition@1C00000 {
+		partition@1c00000 {
 			label = "alt_kernel";
 			reg = <0x1C00000 0x2A0000>;
 		};
 
-		partition@1EA0000 {
+		partition@1ea0000 {
 			label = "alt_rootfs";
 			reg = <0x1EA0000 0x1760000>;
 		};
@@ -187,7 +187,7 @@
 			reg = <0x3600000 0x4A00000>;
 		};
 
-		partition@C0000 {
+		partition@c0000 {
 			label = "unused";
 			reg = <0xC0000 0x140000>;
 		};
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2] arm: kirkwood: dts: Use lower case for bindings notation

[Mathieu Malaterre]

Improve the DTS files using lower case to fix the following dtc warnings:

Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"

Converted using the following command:

find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C

For simplicity, two sed expressions were used to solve each warnings separately.

To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:

https://elinux.org/Device_Tree_Linux#Linux_conventions

This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")

Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
---
v2: Fix the original template message since it was completely misleading for kirkwood subarch.

 arch/arm/boot/dts/kirkwood-linksys-viper.dts | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
index df7851820507..f21a50dd9869 100644
--- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
@@ -157,7 +157,7 @@
 			reg = <0x80000 0x20000>;
 		};
 
-		partition at A0000 {
+		partition at a0000 {
 			label = "s_env";
 			reg = <0xA0000 0x20000>;
 		};
@@ -167,17 +167,17 @@
 			reg = <0x200000 0x2A0000>;
 		};
 
-		partition at 4A0000 {
+		partition at 4a0000 {
 			label = "rootfs";
 			reg = <0x4A0000 0x1760000>;
 		};
 
-		partition at 1C00000 {
+		partition at 1c00000 {
 			label = "alt_kernel";
 			reg = <0x1C00000 0x2A0000>;
 		};
 
-		partition at 1EA0000 {
+		partition at 1ea0000 {
 			label = "alt_rootfs";
 			reg = <0x1EA0000 0x1760000>;
 		};
@@ -187,7 +187,7 @@
 			reg = <0x3600000 0x4A00000>;
 		};
 
-		partition at C0000 {
+		partition at c0000 {
 			label = "unused";
 			reg = <0xC0000 0x140000>;
 		};
-- 
2.11.0

Re: [PATCH v2] arm: kirkwood: dts: Use lower case for bindings notation

[Andrew Lunn]

On Fri, Dec 15, 2017 at 06:07:11PM +0100, Mathieu Malaterre wrote:
> Improve the DTS files using lower case to fix the following dtc warnings:
> 
> Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
> 
> Converted using the following command:
> 
> find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
> 
> For simplicity, two sed expressions were used to solve each warnings separately.
> 
> To make the regex expression more robust a few other issues were resolved,
> namely setting unit-address to lower case, and adding a whitespace before the
> the opening curly brace:
> 
> https://elinux.org/Device_Tree_Linux#Linux_conventions
> 
> This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
> 
> Reported-by: David Daney <ddaney@caviumnetworks.com>
> Suggested-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Mathieu Malaterre <malat@debian.org>

Thanks for fixing up the commit message.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

Re: [PATCH v2] arm: kirkwood: dts: Use lower case for bindings notation

[Andrew Lunn]

On Fri, Dec 15, 2017 at 06:07:11PM +0100, Mathieu Malaterre wrote:
> Improve the DTS files using lower case to fix the following dtc warnings:
> 
> Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
> 
> Converted using the following command:
> 
> find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
> 
> For simplicity, two sed expressions were used to solve each warnings separately.
> 
> To make the regex expression more robust a few other issues were resolved,
> namely setting unit-address to lower case, and adding a whitespace before the
> the opening curly brace:
> 
> https://elinux.org/Device_Tree_Linux#Linux_conventions
> 
> This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
> 
> Reported-by: David Daney <ddaney-M3mlKVOIwJVv6pq1l3V1OdBPR1lH4CV8@public.gmane.org>
> Suggested-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Signed-off-by: Mathieu Malaterre <malat-8fiUuRrzOP0dnm+yROfE0A@public.gmane.org>

Thanks for fixing up the commit message.

Reviewed-by: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>

    Andrew
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2] arm: kirkwood: dts: Use lower case for bindings notation

[Andrew Lunn]

On Fri, Dec 15, 2017 at 06:07:11PM +0100, Mathieu Malaterre wrote:
> Improve the DTS files using lower case to fix the following dtc warnings:
> 
> Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
> 
> Converted using the following command:
> 
> find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
> 
> For simplicity, two sed expressions were used to solve each warnings separately.
> 
> To make the regex expression more robust a few other issues were resolved,
> namely setting unit-address to lower case, and adding a whitespace before the
> the opening curly brace:
> 
> https://elinux.org/Device_Tree_Linux#Linux_conventions
> 
> This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
> 
> Reported-by: David Daney <ddaney@caviumnetworks.com>
> Suggested-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Mathieu Malaterre <malat@debian.org>

Thanks for fixing up the commit message.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

Re: [PATCH v2] arm: kirkwood: dts: Use lower case for bindings notation

[Gregory CLEMENT]

Hi Mathieu,
 
 On ven., déc. 15 2017, Andrew Lunn <andrew@lunn.ch> wrote:

> On Fri, Dec 15, 2017 at 06:07:11PM +0100, Mathieu Malaterre wrote:
>> Improve the DTS files using lower case to fix the following dtc warnings:
>> 
>> Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
>> 
>> Converted using the following command:
>> 
>> find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
>> 
>> For simplicity, two sed expressions were used to solve each warnings separately.
>> 
>> To make the regex expression more robust a few other issues were resolved,
>> namely setting unit-address to lower case, and adding a whitespace before the
>> the opening curly brace:
>> 
>> https://elinux.org/Device_Tree_Linux#Linux_conventions
>> 
>> This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
>> 
>> Reported-by: David Daney <ddaney@caviumnetworks.com>
>> Suggested-by: Rob Herring <robh@kernel.org>
>> Signed-off-by: Mathieu Malaterre <malat@debian.org>
>
> Thanks for fixing up the commit message.
>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>

Applied on mvebu/dt

Thanks,

Gregory

>
>     Andrew

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

[PATCH v2] arm: kirkwood: dts: Use lower case for bindings notation

[Gregory CLEMENT]

Hi Mathieu,
 
 On ven., d?c. 15 2017, Andrew Lunn <andrew@lunn.ch> wrote:

> On Fri, Dec 15, 2017 at 06:07:11PM +0100, Mathieu Malaterre wrote:
>> Improve the DTS files using lower case to fix the following dtc warnings:
>> 
>> Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
>> 
>> Converted using the following command:
>> 
>> find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
>> 
>> For simplicity, two sed expressions were used to solve each warnings separately.
>> 
>> To make the regex expression more robust a few other issues were resolved,
>> namely setting unit-address to lower case, and adding a whitespace before the
>> the opening curly brace:
>> 
>> https://elinux.org/Device_Tree_Linux#Linux_conventions
>> 
>> This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
>> 
>> Reported-by: David Daney <ddaney@caviumnetworks.com>
>> Suggested-by: Rob Herring <robh@kernel.org>
>> Signed-off-by: Mathieu Malaterre <malat@debian.org>
>
> Thanks for fixing up the commit message.
>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>

Applied on mvebu/dt

Thanks,

Gregory

>
>     Andrew

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com