* [PATCH v2] ARM: mvebu: add support for the Linksys WRT1900ACS (Shelby)
@ 2017-02-14 19:17 ` Ralph Sennhauser
0 siblings, 0 replies; 15+ messages in thread
From: Ralph Sennhauser @ 2017-02-14 19:17 UTC (permalink / raw)
To: Gregory Clement
Cc: Ralph Sennhauser, Imre Kaloz, Rob Herring, Mark Rutland,
Russell King, Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
moderated list:ARM PORT, open list
The Linksys WRT1900ACS (Shelby) is another Armada 385 based router in
the Linksys WRT AC Series which got released in October 2015.
The file armada-385-linksys-shelby.dts is taken from OpenWrt as-is and
originally authored by Imre Kaloz.
URL: https://github.com/openwrt/openwrt/blob/8466384db1154a107b86bf3ca10b166a21bd81d0/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-shelby.dts
CC: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Jason Cooper <jason@lakedaemon.net>
---
Notes:
V1 -> V2:
- Use full instead of shortened URL in commit message (suggested by Jason Cooper)
- add collected tags, thanks to donors ;)
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/armada-385-linksys-shelby.dts | 114 ++++++++++++++++++++++++
2 files changed, 115 insertions(+)
create mode 100644 arch/arm/boot/dts/armada-385-linksys-shelby.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 0118084..16f1748 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -970,6 +970,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
armada-385-db-ap.dtb \
armada-385-linksys-caiman.dtb \
armada-385-linksys-cobra.dtb \
+ armada-385-linksys-shelby.dtb \
armada-385-turris-omnia.dtb \
armada-388-clearfog.dtb \
armada-388-clearfog-base.dtb \
diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
new file mode 100644
index 0000000..c7a8ddd
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
@@ -0,0 +1,114 @@
+/*
+ * Device Tree file for the Linksys WRT1900ACS (Shelby)
+ *
+ * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-385-linksys.dtsi"
+
+/ {
+ model = "Linksys WRT1900ACS";
+ compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385",
+ "marvell,armada380";
+
+ soc {
+ internal-regs{
+ i2c@11000 {
+
+ pca9635@68 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wan_amber@0 {
+ label = "shelby:amber:wan";
+ reg = <0x0>;
+ };
+
+ wan_white@1 {
+ label = "shelby:white:wan";
+ reg = <0x1>;
+ };
+
+ wlan_2g@2 {
+ label = "shelby:white:wlan_2g";
+ reg = <0x2>;
+ };
+
+ wlan_5g@3 {
+ label = "shelby:white:wlan_5g";
+ reg = <0x3>;
+ };
+
+ usb2@5 {
+ label = "shelby:white:usb2";
+ reg = <0x5>;
+ };
+
+ usb3_1@6 {
+ label = "shelby:white:usb3_1";
+ reg = <0x6>;
+ };
+
+ usb3_2@7 {
+ label = "shelby:white:usb3_2";
+ reg = <0x7>;
+ };
+
+ wps_white@8 {
+ label = "shelby:white:wps";
+ reg = <0x8>;
+ };
+
+ wps_amber@9 {
+ label = "shelby:amber:wps";
+ reg = <0x9>;
+ };
+ };
+ };
+ };
+ };
+
+ gpio-leds {
+ power {
+ label = "shelby:white:power";
+ };
+
+ sata {
+ label = "shelby:white:sata";
+ };
+ };
+};
--
2.10.2
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v2] ARM: mvebu: add support for the Linksys WRT1900ACS (Shelby)
@ 2017-02-14 19:17 ` Ralph Sennhauser
0 siblings, 0 replies; 15+ messages in thread
From: Ralph Sennhauser @ 2017-02-14 19:17 UTC (permalink / raw)
To: Gregory Clement
Cc: Ralph Sennhauser, Imre Kaloz, Rob Herring, Mark Rutland,
Russell King, Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
moderated list:ARM PORT, open list
The Linksys WRT1900ACS (Shelby) is another Armada 385 based router in
the Linksys WRT AC Series which got released in October 2015.
The file armada-385-linksys-shelby.dts is taken from OpenWrt as-is and
originally authored by Imre Kaloz.
URL: https://github.com/openwrt/openwrt/blob/8466384db1154a107b86bf3ca10b166a21bd81d0/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-shelby.dts
CC: Imre Kaloz <kaloz-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
Signed-off-by: Ralph Sennhauser <ralph.sennhauser-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Signed-off-by: Imre Kaloz <kaloz-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
Reviewed-by: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
Acked-by: Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>
---
Notes:
V1 -> V2:
- Use full instead of shortened URL in commit message (suggested by Jason Cooper)
- add collected tags, thanks to donors ;)
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/armada-385-linksys-shelby.dts | 114 ++++++++++++++++++++++++
2 files changed, 115 insertions(+)
create mode 100644 arch/arm/boot/dts/armada-385-linksys-shelby.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 0118084..16f1748 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -970,6 +970,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
armada-385-db-ap.dtb \
armada-385-linksys-caiman.dtb \
armada-385-linksys-cobra.dtb \
+ armada-385-linksys-shelby.dtb \
armada-385-turris-omnia.dtb \
armada-388-clearfog.dtb \
armada-388-clearfog-base.dtb \
diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
new file mode 100644
index 0000000..c7a8ddd
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
@@ -0,0 +1,114 @@
+/*
+ * Device Tree file for the Linksys WRT1900ACS (Shelby)
+ *
+ * Copyright (C) 2015 Imre Kaloz <kaloz-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
+ *
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-385-linksys.dtsi"
+
+/ {
+ model = "Linksys WRT1900ACS";
+ compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385",
+ "marvell,armada380";
+
+ soc {
+ internal-regs{
+ i2c@11000 {
+
+ pca9635@68 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wan_amber@0 {
+ label = "shelby:amber:wan";
+ reg = <0x0>;
+ };
+
+ wan_white@1 {
+ label = "shelby:white:wan";
+ reg = <0x1>;
+ };
+
+ wlan_2g@2 {
+ label = "shelby:white:wlan_2g";
+ reg = <0x2>;
+ };
+
+ wlan_5g@3 {
+ label = "shelby:white:wlan_5g";
+ reg = <0x3>;
+ };
+
+ usb2@5 {
+ label = "shelby:white:usb2";
+ reg = <0x5>;
+ };
+
+ usb3_1@6 {
+ label = "shelby:white:usb3_1";
+ reg = <0x6>;
+ };
+
+ usb3_2@7 {
+ label = "shelby:white:usb3_2";
+ reg = <0x7>;
+ };
+
+ wps_white@8 {
+ label = "shelby:white:wps";
+ reg = <0x8>;
+ };
+
+ wps_amber@9 {
+ label = "shelby:amber:wps";
+ reg = <0x9>;
+ };
+ };
+ };
+ };
+ };
+
+ gpio-leds {
+ power {
+ label = "shelby:white:power";
+ };
+
+ sata {
+ label = "shelby:white:sata";
+ };
+ };
+};
--
2.10.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH v2] ARM: mvebu: add support for the Linksys WRT1900ACS (Shelby)
@ 2017-02-14 19:17 ` Ralph Sennhauser
0 siblings, 0 replies; 15+ messages in thread
From: Ralph Sennhauser @ 2017-02-14 19:17 UTC (permalink / raw)
To: linux-arm-kernel
The Linksys WRT1900ACS (Shelby) is another Armada 385 based router in
the Linksys WRT AC Series which got released in October 2015.
The file armada-385-linksys-shelby.dts is taken from OpenWrt as-is and
originally authored by Imre Kaloz.
URL: https://github.com/openwrt/openwrt/blob/8466384db1154a107b86bf3ca10b166a21bd81d0/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-shelby.dts
CC: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Jason Cooper <jason@lakedaemon.net>
---
Notes:
V1 -> V2:
- Use full instead of shortened URL in commit message (suggested by Jason Cooper)
- add collected tags, thanks to donors ;)
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/armada-385-linksys-shelby.dts | 114 ++++++++++++++++++++++++
2 files changed, 115 insertions(+)
create mode 100644 arch/arm/boot/dts/armada-385-linksys-shelby.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 0118084..16f1748 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -970,6 +970,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
armada-385-db-ap.dtb \
armada-385-linksys-caiman.dtb \
armada-385-linksys-cobra.dtb \
+ armada-385-linksys-shelby.dtb \
armada-385-turris-omnia.dtb \
armada-388-clearfog.dtb \
armada-388-clearfog-base.dtb \
diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
new file mode 100644
index 0000000..c7a8ddd
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
@@ -0,0 +1,114 @@
+/*
+ * Device Tree file for the Linksys WRT1900ACS (Shelby)
+ *
+ * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-385-linksys.dtsi"
+
+/ {
+ model = "Linksys WRT1900ACS";
+ compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385",
+ "marvell,armada380";
+
+ soc {
+ internal-regs{
+ i2c at 11000 {
+
+ pca9635 at 68 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wan_amber at 0 {
+ label = "shelby:amber:wan";
+ reg = <0x0>;
+ };
+
+ wan_white at 1 {
+ label = "shelby:white:wan";
+ reg = <0x1>;
+ };
+
+ wlan_2g at 2 {
+ label = "shelby:white:wlan_2g";
+ reg = <0x2>;
+ };
+
+ wlan_5g at 3 {
+ label = "shelby:white:wlan_5g";
+ reg = <0x3>;
+ };
+
+ usb2 at 5 {
+ label = "shelby:white:usb2";
+ reg = <0x5>;
+ };
+
+ usb3_1 at 6 {
+ label = "shelby:white:usb3_1";
+ reg = <0x6>;
+ };
+
+ usb3_2 at 7 {
+ label = "shelby:white:usb3_2";
+ reg = <0x7>;
+ };
+
+ wps_white at 8 {
+ label = "shelby:white:wps";
+ reg = <0x8>;
+ };
+
+ wps_amber at 9 {
+ label = "shelby:amber:wps";
+ reg = <0x9>;
+ };
+ };
+ };
+ };
+ };
+
+ gpio-leds {
+ power {
+ label = "shelby:white:power";
+ };
+
+ sata {
+ label = "shelby:white:sata";
+ };
+ };
+};
--
2.10.2
^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH v2] ARM: mvebu: add support for the Linksys WRT1900ACS (Shelby)
@ 2017-02-15 15:18 ` Gregory CLEMENT
0 siblings, 0 replies; 15+ messages in thread
From: Gregory CLEMENT @ 2017-02-15 15:18 UTC (permalink / raw)
To: Ralph Sennhauser
Cc: Imre Kaloz, Rob Herring, Mark Rutland, Russell King,
Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
moderated list:ARM PORT, open list
Hi Ralph,
On mar., févr. 14 2017, Ralph Sennhauser <ralph.sennhauser@gmail.com> wrote:
> The Linksys WRT1900ACS (Shelby) is another Armada 385 based router in
> the Linksys WRT AC Series which got released in October 2015.
>
> The file armada-385-linksys-shelby.dts is taken from OpenWrt as-is and
> originally authored by Imre Kaloz.
>
> URL: https://github.com/openwrt/openwrt/blob/8466384db1154a107b86bf3ca10b166a21bd81d0/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-shelby.dts
> CC: Imre Kaloz <kaloz@openwrt.org>
> Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
> Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> Acked-by: Jason Cooper <jason@lakedaemon.net>
Applied on mvebu/dt-4.12
Thanks,
Gregory
> ---
>
> Notes:
> V1 -> V2:
> - Use full instead of shortened URL in commit message (suggested by Jason Cooper)
> - add collected tags, thanks to donors ;)
>
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/armada-385-linksys-shelby.dts | 114 ++++++++++++++++++++++++
> 2 files changed, 115 insertions(+)
> create mode 100644 arch/arm/boot/dts/armada-385-linksys-shelby.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 0118084..16f1748 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -970,6 +970,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
> armada-385-db-ap.dtb \
> armada-385-linksys-caiman.dtb \
> armada-385-linksys-cobra.dtb \
> + armada-385-linksys-shelby.dtb \
> armada-385-turris-omnia.dtb \
> armada-388-clearfog.dtb \
> armada-388-clearfog-base.dtb \
> diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
> new file mode 100644
> index 0000000..c7a8ddd
> --- /dev/null
> +++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
> @@ -0,0 +1,114 @@
> +/*
> + * Device Tree file for the Linksys WRT1900ACS (Shelby)
> + *
> + * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
> + *
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without
> + * any warranty of any kind, whether express or implied.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include "armada-385-linksys.dtsi"
> +
> +/ {
> + model = "Linksys WRT1900ACS";
> + compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385",
> + "marvell,armada380";
> +
> + soc {
> + internal-regs{
> + i2c@11000 {
> +
> + pca9635@68 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + wan_amber@0 {
> + label = "shelby:amber:wan";
> + reg = <0x0>;
> + };
> +
> + wan_white@1 {
> + label = "shelby:white:wan";
> + reg = <0x1>;
> + };
> +
> + wlan_2g@2 {
> + label = "shelby:white:wlan_2g";
> + reg = <0x2>;
> + };
> +
> + wlan_5g@3 {
> + label = "shelby:white:wlan_5g";
> + reg = <0x3>;
> + };
> +
> + usb2@5 {
> + label = "shelby:white:usb2";
> + reg = <0x5>;
> + };
> +
> + usb3_1@6 {
> + label = "shelby:white:usb3_1";
> + reg = <0x6>;
> + };
> +
> + usb3_2@7 {
> + label = "shelby:white:usb3_2";
> + reg = <0x7>;
> + };
> +
> + wps_white@8 {
> + label = "shelby:white:wps";
> + reg = <0x8>;
> + };
> +
> + wps_amber@9 {
> + label = "shelby:amber:wps";
> + reg = <0x9>;
> + };
> + };
> + };
> + };
> + };
> +
> + gpio-leds {
> + power {
> + label = "shelby:white:power";
> + };
> +
> + sata {
> + label = "shelby:white:sata";
> + };
> + };
> +};
> --
> 2.10.2
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2] ARM: mvebu: add support for the Linksys WRT1900ACS (Shelby)
@ 2017-02-15 15:18 ` Gregory CLEMENT
0 siblings, 0 replies; 15+ messages in thread
From: Gregory CLEMENT @ 2017-02-15 15:18 UTC (permalink / raw)
To: Ralph Sennhauser
Cc: Imre Kaloz, Rob Herring, Mark Rutland, Russell King,
Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
moderated list:ARM PORT, open list
Hi Ralph,
On mar., févr. 14 2017, Ralph Sennhauser <ralph.sennhauser-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> The Linksys WRT1900ACS (Shelby) is another Armada 385 based router in
> the Linksys WRT AC Series which got released in October 2015.
>
> The file armada-385-linksys-shelby.dts is taken from OpenWrt as-is and
> originally authored by Imre Kaloz.
>
> URL: https://github.com/openwrt/openwrt/blob/8466384db1154a107b86bf3ca10b166a21bd81d0/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-shelby.dts
> CC: Imre Kaloz <kaloz-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
> Signed-off-by: Ralph Sennhauser <ralph.sennhauser-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Signed-off-by: Imre Kaloz <kaloz-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
> Reviewed-by: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
> Acked-by: Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>
Applied on mvebu/dt-4.12
Thanks,
Gregory
> ---
>
> Notes:
> V1 -> V2:
> - Use full instead of shortened URL in commit message (suggested by Jason Cooper)
> - add collected tags, thanks to donors ;)
>
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/armada-385-linksys-shelby.dts | 114 ++++++++++++++++++++++++
> 2 files changed, 115 insertions(+)
> create mode 100644 arch/arm/boot/dts/armada-385-linksys-shelby.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 0118084..16f1748 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -970,6 +970,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
> armada-385-db-ap.dtb \
> armada-385-linksys-caiman.dtb \
> armada-385-linksys-cobra.dtb \
> + armada-385-linksys-shelby.dtb \
> armada-385-turris-omnia.dtb \
> armada-388-clearfog.dtb \
> armada-388-clearfog-base.dtb \
> diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
> new file mode 100644
> index 0000000..c7a8ddd
> --- /dev/null
> +++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
> @@ -0,0 +1,114 @@
> +/*
> + * Device Tree file for the Linksys WRT1900ACS (Shelby)
> + *
> + * Copyright (C) 2015 Imre Kaloz <kaloz-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
> + *
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without
> + * any warranty of any kind, whether express or implied.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include "armada-385-linksys.dtsi"
> +
> +/ {
> + model = "Linksys WRT1900ACS";
> + compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385",
> + "marvell,armada380";
> +
> + soc {
> + internal-regs{
> + i2c@11000 {
> +
> + pca9635@68 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + wan_amber@0 {
> + label = "shelby:amber:wan";
> + reg = <0x0>;
> + };
> +
> + wan_white@1 {
> + label = "shelby:white:wan";
> + reg = <0x1>;
> + };
> +
> + wlan_2g@2 {
> + label = "shelby:white:wlan_2g";
> + reg = <0x2>;
> + };
> +
> + wlan_5g@3 {
> + label = "shelby:white:wlan_5g";
> + reg = <0x3>;
> + };
> +
> + usb2@5 {
> + label = "shelby:white:usb2";
> + reg = <0x5>;
> + };
> +
> + usb3_1@6 {
> + label = "shelby:white:usb3_1";
> + reg = <0x6>;
> + };
> +
> + usb3_2@7 {
> + label = "shelby:white:usb3_2";
> + reg = <0x7>;
> + };
> +
> + wps_white@8 {
> + label = "shelby:white:wps";
> + reg = <0x8>;
> + };
> +
> + wps_amber@9 {
> + label = "shelby:amber:wps";
> + reg = <0x9>;
> + };
> + };
> + };
> + };
> + };
> +
> + gpio-leds {
> + power {
> + label = "shelby:white:power";
> + };
> +
> + sata {
> + label = "shelby:white:sata";
> + };
> + };
> +};
> --
> 2.10.2
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH v2] ARM: mvebu: add support for the Linksys WRT1900ACS (Shelby)
@ 2017-02-15 15:18 ` Gregory CLEMENT
0 siblings, 0 replies; 15+ messages in thread
From: Gregory CLEMENT @ 2017-02-15 15:18 UTC (permalink / raw)
To: linux-arm-kernel
Hi Ralph,
On mar., f?vr. 14 2017, Ralph Sennhauser <ralph.sennhauser@gmail.com> wrote:
> The Linksys WRT1900ACS (Shelby) is another Armada 385 based router in
> the Linksys WRT AC Series which got released in October 2015.
>
> The file armada-385-linksys-shelby.dts is taken from OpenWrt as-is and
> originally authored by Imre Kaloz.
>
> URL: https://github.com/openwrt/openwrt/blob/8466384db1154a107b86bf3ca10b166a21bd81d0/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-shelby.dts
> CC: Imre Kaloz <kaloz@openwrt.org>
> Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
> Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> Acked-by: Jason Cooper <jason@lakedaemon.net>
Applied on mvebu/dt-4.12
Thanks,
Gregory
> ---
>
> Notes:
> V1 -> V2:
> - Use full instead of shortened URL in commit message (suggested by Jason Cooper)
> - add collected tags, thanks to donors ;)
>
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/armada-385-linksys-shelby.dts | 114 ++++++++++++++++++++++++
> 2 files changed, 115 insertions(+)
> create mode 100644 arch/arm/boot/dts/armada-385-linksys-shelby.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 0118084..16f1748 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -970,6 +970,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
> armada-385-db-ap.dtb \
> armada-385-linksys-caiman.dtb \
> armada-385-linksys-cobra.dtb \
> + armada-385-linksys-shelby.dtb \
> armada-385-turris-omnia.dtb \
> armada-388-clearfog.dtb \
> armada-388-clearfog-base.dtb \
> diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
> new file mode 100644
> index 0000000..c7a8ddd
> --- /dev/null
> +++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
> @@ -0,0 +1,114 @@
> +/*
> + * Device Tree file for the Linksys WRT1900ACS (Shelby)
> + *
> + * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
> + *
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without
> + * any warranty of any kind, whether express or implied.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include "armada-385-linksys.dtsi"
> +
> +/ {
> + model = "Linksys WRT1900ACS";
> + compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385",
> + "marvell,armada380";
> +
> + soc {
> + internal-regs{
> + i2c at 11000 {
> +
> + pca9635 at 68 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + wan_amber at 0 {
> + label = "shelby:amber:wan";
> + reg = <0x0>;
> + };
> +
> + wan_white at 1 {
> + label = "shelby:white:wan";
> + reg = <0x1>;
> + };
> +
> + wlan_2g at 2 {
> + label = "shelby:white:wlan_2g";
> + reg = <0x2>;
> + };
> +
> + wlan_5g at 3 {
> + label = "shelby:white:wlan_5g";
> + reg = <0x3>;
> + };
> +
> + usb2 at 5 {
> + label = "shelby:white:usb2";
> + reg = <0x5>;
> + };
> +
> + usb3_1 at 6 {
> + label = "shelby:white:usb3_1";
> + reg = <0x6>;
> + };
> +
> + usb3_2 at 7 {
> + label = "shelby:white:usb3_2";
> + reg = <0x7>;
> + };
> +
> + wps_white at 8 {
> + label = "shelby:white:wps";
> + reg = <0x8>;
> + };
> +
> + wps_amber at 9 {
> + label = "shelby:amber:wps";
> + reg = <0x9>;
> + };
> + };
> + };
> + };
> + };
> +
> + gpio-leds {
> + power {
> + label = "shelby:white:power";
> + };
> +
> + sata {
> + label = "shelby:white:sata";
> + };
> + };
> +};
> --
> 2.10.2
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2] ARM: mvebu: add support for the Linksys WRT1900ACS (Shelby)
2017-02-15 15:18 ` Gregory CLEMENT
(?)
@ 2017-03-07 17:27 ` Gregory CLEMENT
-1 siblings, 0 replies; 15+ messages in thread
From: Gregory CLEMENT @ 2017-03-07 17:27 UTC (permalink / raw)
To: Ralph Sennhauser
Cc: Mark Rutland, Andrew Lunn, Jason Cooper,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Russell King, open list, Rob Herring, Imre Kaloz,
moderated list:ARM PORT, Sebastian Hesselbarth
Hi Gregory,
On mer., févr. 15 2017, Gregory CLEMENT <gregory.clement@free-electrons.com> wrote:
> Hi Ralph,
>
> On mar., févr. 14 2017, Ralph Sennhauser <ralph.sennhauser@gmail.com> wrote:
>
>> The Linksys WRT1900ACS (Shelby) is another Armada 385 based router in
>> the Linksys WRT AC Series which got released in October 2015.
>>
>> The file armada-385-linksys-shelby.dts is taken from OpenWrt as-is and
>> originally authored by Imre Kaloz.
>>
>> URL: https://github.com/openwrt/openwrt/blob/8466384db1154a107b86bf3ca10b166a21bd81d0/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-shelby.dts
>> CC: Imre Kaloz <kaloz@openwrt.org>
>> Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
>> Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
>> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
>> Acked-by: Jason Cooper <jason@lakedaemon.net>
>
> Applied on mvebu/dt-4.12
It is now in mvebu/dt and in the same time I fixed the title to:
"ARM: dts: armada-385: add support for the Linksys WRT1900ACS (Shelby)"
Gregory
>
> Thanks,
>
> Gregory
>
>> ---
>>
>> Notes:
>> V1 -> V2:
>> - Use full instead of shortened URL in commit message (suggested by Jason Cooper)
>> - add collected tags, thanks to donors ;)
>>
>> arch/arm/boot/dts/Makefile | 1 +
>> arch/arm/boot/dts/armada-385-linksys-shelby.dts | 114 ++++++++++++++++++++++++
>> 2 files changed, 115 insertions(+)
>> create mode 100644 arch/arm/boot/dts/armada-385-linksys-shelby.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 0118084..16f1748 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -970,6 +970,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
>> armada-385-db-ap.dtb \
>> armada-385-linksys-caiman.dtb \
>> armada-385-linksys-cobra.dtb \
>> + armada-385-linksys-shelby.dtb \
>> armada-385-turris-omnia.dtb \
>> armada-388-clearfog.dtb \
>> armada-388-clearfog-base.dtb \
>> diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
>> new file mode 100644
>> index 0000000..c7a8ddd
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
>> @@ -0,0 +1,114 @@
>> +/*
>> + * Device Tree file for the Linksys WRT1900ACS (Shelby)
>> + *
>> + * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
>> + *
>> + *
>> + * This file is dual-licensed: you can use it either under the terms
>> + * of the GPL or the X11 license, at your option. Note that this dual
>> + * licensing only applies to this file, and not this project as a
>> + * whole.
>> + *
>> + * a) This file is licensed under the terms of the GNU General Public
>> + * License version 2. This program is licensed "as is" without
>> + * any warranty of any kind, whether express or implied.
>> + *
>> + * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> + * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> + * conditions:
>> + *
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> + */
>> +
>> +/dts-v1/;
>> +#include "armada-385-linksys.dtsi"
>> +
>> +/ {
>> + model = "Linksys WRT1900ACS";
>> + compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385",
>> + "marvell,armada380";
>> +
>> + soc {
>> + internal-regs{
>> + i2c@11000 {
>> +
>> + pca9635@68 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + wan_amber@0 {
>> + label = "shelby:amber:wan";
>> + reg = <0x0>;
>> + };
>> +
>> + wan_white@1 {
>> + label = "shelby:white:wan";
>> + reg = <0x1>;
>> + };
>> +
>> + wlan_2g@2 {
>> + label = "shelby:white:wlan_2g";
>> + reg = <0x2>;
>> + };
>> +
>> + wlan_5g@3 {
>> + label = "shelby:white:wlan_5g";
>> + reg = <0x3>;
>> + };
>> +
>> + usb2@5 {
>> + label = "shelby:white:usb2";
>> + reg = <0x5>;
>> + };
>> +
>> + usb3_1@6 {
>> + label = "shelby:white:usb3_1";
>> + reg = <0x6>;
>> + };
>> +
>> + usb3_2@7 {
>> + label = "shelby:white:usb3_2";
>> + reg = <0x7>;
>> + };
>> +
>> + wps_white@8 {
>> + label = "shelby:white:wps";
>> + reg = <0x8>;
>> + };
>> +
>> + wps_amber@9 {
>> + label = "shelby:amber:wps";
>> + reg = <0x9>;
>> + };
>> + };
>> + };
>> + };
>> + };
>> +
>> + gpio-leds {
>> + power {
>> + label = "shelby:white:power";
>> + };
>> +
>> + sata {
>> + label = "shelby:white:sata";
>> + };
>> + };
>> +};
>> --
>> 2.10.2
>>
>
> --
> Gregory Clement, Free Electrons
> Kernel, drivers, real-time and embedded Linux
> development, consulting, training and support.
> http://free-electrons.com
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2] ARM: mvebu: add support for the Linksys WRT1900ACS (Shelby)
@ 2017-03-07 17:27 ` Gregory CLEMENT
0 siblings, 0 replies; 15+ messages in thread
From: Gregory CLEMENT @ 2017-03-07 17:27 UTC (permalink / raw)
To: Ralph Sennhauser
Cc: Mark Rutland, Andrew Lunn, Jason Cooper,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list, Russell King, Rob Herring, Imre Kaloz,
moderated list:ARM PORT, Sebastian Hesselbarth
Hi Gregory,
On mer., févr. 15 2017, Gregory CLEMENT <gregory.clement@free-electrons.com> wrote:
> Hi Ralph,
>
> On mar., févr. 14 2017, Ralph Sennhauser <ralph.sennhauser@gmail.com> wrote:
>
>> The Linksys WRT1900ACS (Shelby) is another Armada 385 based router in
>> the Linksys WRT AC Series which got released in October 2015.
>>
>> The file armada-385-linksys-shelby.dts is taken from OpenWrt as-is and
>> originally authored by Imre Kaloz.
>>
>> URL: https://github.com/openwrt/openwrt/blob/8466384db1154a107b86bf3ca10b166a21bd81d0/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-shelby.dts
>> CC: Imre Kaloz <kaloz@openwrt.org>
>> Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
>> Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
>> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
>> Acked-by: Jason Cooper <jason@lakedaemon.net>
>
> Applied on mvebu/dt-4.12
It is now in mvebu/dt and in the same time I fixed the title to:
"ARM: dts: armada-385: add support for the Linksys WRT1900ACS (Shelby)"
Gregory
>
> Thanks,
>
> Gregory
>
>> ---
>>
>> Notes:
>> V1 -> V2:
>> - Use full instead of shortened URL in commit message (suggested by Jason Cooper)
>> - add collected tags, thanks to donors ;)
>>
>> arch/arm/boot/dts/Makefile | 1 +
>> arch/arm/boot/dts/armada-385-linksys-shelby.dts | 114 ++++++++++++++++++++++++
>> 2 files changed, 115 insertions(+)
>> create mode 100644 arch/arm/boot/dts/armada-385-linksys-shelby.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 0118084..16f1748 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -970,6 +970,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
>> armada-385-db-ap.dtb \
>> armada-385-linksys-caiman.dtb \
>> armada-385-linksys-cobra.dtb \
>> + armada-385-linksys-shelby.dtb \
>> armada-385-turris-omnia.dtb \
>> armada-388-clearfog.dtb \
>> armada-388-clearfog-base.dtb \
>> diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
>> new file mode 100644
>> index 0000000..c7a8ddd
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
>> @@ -0,0 +1,114 @@
>> +/*
>> + * Device Tree file for the Linksys WRT1900ACS (Shelby)
>> + *
>> + * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
>> + *
>> + *
>> + * This file is dual-licensed: you can use it either under the terms
>> + * of the GPL or the X11 license, at your option. Note that this dual
>> + * licensing only applies to this file, and not this project as a
>> + * whole.
>> + *
>> + * a) This file is licensed under the terms of the GNU General Public
>> + * License version 2. This program is licensed "as is" without
>> + * any warranty of any kind, whether express or implied.
>> + *
>> + * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> + * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> + * conditions:
>> + *
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> + */
>> +
>> +/dts-v1/;
>> +#include "armada-385-linksys.dtsi"
>> +
>> +/ {
>> + model = "Linksys WRT1900ACS";
>> + compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385",
>> + "marvell,armada380";
>> +
>> + soc {
>> + internal-regs{
>> + i2c@11000 {
>> +
>> + pca9635@68 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + wan_amber@0 {
>> + label = "shelby:amber:wan";
>> + reg = <0x0>;
>> + };
>> +
>> + wan_white@1 {
>> + label = "shelby:white:wan";
>> + reg = <0x1>;
>> + };
>> +
>> + wlan_2g@2 {
>> + label = "shelby:white:wlan_2g";
>> + reg = <0x2>;
>> + };
>> +
>> + wlan_5g@3 {
>> + label = "shelby:white:wlan_5g";
>> + reg = <0x3>;
>> + };
>> +
>> + usb2@5 {
>> + label = "shelby:white:usb2";
>> + reg = <0x5>;
>> + };
>> +
>> + usb3_1@6 {
>> + label = "shelby:white:usb3_1";
>> + reg = <0x6>;
>> + };
>> +
>> + usb3_2@7 {
>> + label = "shelby:white:usb3_2";
>> + reg = <0x7>;
>> + };
>> +
>> + wps_white@8 {
>> + label = "shelby:white:wps";
>> + reg = <0x8>;
>> + };
>> +
>> + wps_amber@9 {
>> + label = "shelby:amber:wps";
>> + reg = <0x9>;
>> + };
>> + };
>> + };
>> + };
>> + };
>> +
>> + gpio-leds {
>> + power {
>> + label = "shelby:white:power";
>> + };
>> +
>> + sata {
>> + label = "shelby:white:sata";
>> + };
>> + };
>> +};
>> --
>> 2.10.2
>>
>
> --
> Gregory Clement, Free Electrons
> Kernel, drivers, real-time and embedded Linux
> development, consulting, training and support.
> http://free-electrons.com
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH v2] ARM: mvebu: add support for the Linksys WRT1900ACS (Shelby)
@ 2017-03-07 17:27 ` Gregory CLEMENT
0 siblings, 0 replies; 15+ messages in thread
From: Gregory CLEMENT @ 2017-03-07 17:27 UTC (permalink / raw)
To: linux-arm-kernel
Hi Gregory,
On mer., f?vr. 15 2017, Gregory CLEMENT <gregory.clement@free-electrons.com> wrote:
> Hi Ralph,
>
> On mar., f?vr. 14 2017, Ralph Sennhauser <ralph.sennhauser@gmail.com> wrote:
>
>> The Linksys WRT1900ACS (Shelby) is another Armada 385 based router in
>> the Linksys WRT AC Series which got released in October 2015.
>>
>> The file armada-385-linksys-shelby.dts is taken from OpenWrt as-is and
>> originally authored by Imre Kaloz.
>>
>> URL: https://github.com/openwrt/openwrt/blob/8466384db1154a107b86bf3ca10b166a21bd81d0/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-shelby.dts
>> CC: Imre Kaloz <kaloz@openwrt.org>
>> Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
>> Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
>> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
>> Acked-by: Jason Cooper <jason@lakedaemon.net>
>
> Applied on mvebu/dt-4.12
It is now in mvebu/dt and in the same time I fixed the title to:
"ARM: dts: armada-385: add support for the Linksys WRT1900ACS (Shelby)"
Gregory
>
> Thanks,
>
> Gregory
>
>> ---
>>
>> Notes:
>> V1 -> V2:
>> - Use full instead of shortened URL in commit message (suggested by Jason Cooper)
>> - add collected tags, thanks to donors ;)
>>
>> arch/arm/boot/dts/Makefile | 1 +
>> arch/arm/boot/dts/armada-385-linksys-shelby.dts | 114 ++++++++++++++++++++++++
>> 2 files changed, 115 insertions(+)
>> create mode 100644 arch/arm/boot/dts/armada-385-linksys-shelby.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 0118084..16f1748 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -970,6 +970,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
>> armada-385-db-ap.dtb \
>> armada-385-linksys-caiman.dtb \
>> armada-385-linksys-cobra.dtb \
>> + armada-385-linksys-shelby.dtb \
>> armada-385-turris-omnia.dtb \
>> armada-388-clearfog.dtb \
>> armada-388-clearfog-base.dtb \
>> diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
>> new file mode 100644
>> index 0000000..c7a8ddd
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
>> @@ -0,0 +1,114 @@
>> +/*
>> + * Device Tree file for the Linksys WRT1900ACS (Shelby)
>> + *
>> + * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
>> + *
>> + *
>> + * This file is dual-licensed: you can use it either under the terms
>> + * of the GPL or the X11 license, at your option. Note that this dual
>> + * licensing only applies to this file, and not this project as a
>> + * whole.
>> + *
>> + * a) This file is licensed under the terms of the GNU General Public
>> + * License version 2. This program is licensed "as is" without
>> + * any warranty of any kind, whether express or implied.
>> + *
>> + * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> + * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> + * conditions:
>> + *
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> + */
>> +
>> +/dts-v1/;
>> +#include "armada-385-linksys.dtsi"
>> +
>> +/ {
>> + model = "Linksys WRT1900ACS";
>> + compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385",
>> + "marvell,armada380";
>> +
>> + soc {
>> + internal-regs{
>> + i2c at 11000 {
>> +
>> + pca9635 at 68 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + wan_amber at 0 {
>> + label = "shelby:amber:wan";
>> + reg = <0x0>;
>> + };
>> +
>> + wan_white at 1 {
>> + label = "shelby:white:wan";
>> + reg = <0x1>;
>> + };
>> +
>> + wlan_2g at 2 {
>> + label = "shelby:white:wlan_2g";
>> + reg = <0x2>;
>> + };
>> +
>> + wlan_5g at 3 {
>> + label = "shelby:white:wlan_5g";
>> + reg = <0x3>;
>> + };
>> +
>> + usb2 at 5 {
>> + label = "shelby:white:usb2";
>> + reg = <0x5>;
>> + };
>> +
>> + usb3_1 at 6 {
>> + label = "shelby:white:usb3_1";
>> + reg = <0x6>;
>> + };
>> +
>> + usb3_2 at 7 {
>> + label = "shelby:white:usb3_2";
>> + reg = <0x7>;
>> + };
>> +
>> + wps_white at 8 {
>> + label = "shelby:white:wps";
>> + reg = <0x8>;
>> + };
>> +
>> + wps_amber at 9 {
>> + label = "shelby:amber:wps";
>> + reg = <0x9>;
>> + };
>> + };
>> + };
>> + };
>> + };
>> +
>> + gpio-leds {
>> + power {
>> + label = "shelby:white:power";
>> + };
>> +
>> + sata {
>> + label = "shelby:white:sata";
>> + };
>> + };
>> +};
>> --
>> 2.10.2
>>
>
> --
> Gregory Clement, Free Electrons
> Kernel, drivers, real-time and embedded Linux
> development, consulting, training and support.
> http://free-electrons.com
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2] ARM: mvebu: add support for the Linksys WRT1900ACS (Shelby)
2017-03-07 17:27 ` Gregory CLEMENT
(?)
@ 2017-03-07 17:48 ` Ralph Sennhauser
-1 siblings, 0 replies; 15+ messages in thread
From: Ralph Sennhauser @ 2017-03-07 17:48 UTC (permalink / raw)
To: Gregory CLEMENT
Cc: Mark Rutland, Andrew Lunn, Jason Cooper,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Russell King, open list, Rob Herring, Imre Kaloz,
moderated list:ARM PORT, Sebastian Hesselbarth
On Tue, 07 Mar 2017 18:27:21 +0100
Gregory CLEMENT <gregory.clement@free-electrons.com> wrote:
>
> It is now in mvebu/dt and in the same time I fixed the title to:
> "ARM: dts: armada-385: add support for the Linksys WRT1900ACS
> (Shelby)"
>
> Gregory
>
Thanks
Ralph
PS: The sort order got mixed with armada-385-synology-ds116.dtb while
merging which got added minutes earlier in arch/arm/boot/dts/Makefile.
PPS: There was also the request of using SPDX tags to v1 after v2 got
merged from Rob Herring and a no by Russell King. I took it as no
action required, you might want to have a look though.
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2] ARM: mvebu: add support for the Linksys WRT1900ACS (Shelby)
@ 2017-03-07 17:48 ` Ralph Sennhauser
0 siblings, 0 replies; 15+ messages in thread
From: Ralph Sennhauser @ 2017-03-07 17:48 UTC (permalink / raw)
To: Gregory CLEMENT
Cc: Mark Rutland, Andrew Lunn, Jason Cooper,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list, Russell King, Rob Herring, Imre Kaloz,
moderated list:ARM PORT, Sebastian Hesselbarth
On Tue, 07 Mar 2017 18:27:21 +0100
Gregory CLEMENT <gregory.clement@free-electrons.com> wrote:
>
> It is now in mvebu/dt and in the same time I fixed the title to:
> "ARM: dts: armada-385: add support for the Linksys WRT1900ACS
> (Shelby)"
>
> Gregory
>
Thanks
Ralph
PS: The sort order got mixed with armada-385-synology-ds116.dtb while
merging which got added minutes earlier in arch/arm/boot/dts/Makefile.
PPS: There was also the request of using SPDX tags to v1 after v2 got
merged from Rob Herring and a no by Russell King. I took it as no
action required, you might want to have a look though.
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH v2] ARM: mvebu: add support for the Linksys WRT1900ACS (Shelby)
@ 2017-03-07 17:48 ` Ralph Sennhauser
0 siblings, 0 replies; 15+ messages in thread
From: Ralph Sennhauser @ 2017-03-07 17:48 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, 07 Mar 2017 18:27:21 +0100
Gregory CLEMENT <gregory.clement@free-electrons.com> wrote:
>
> It is now in mvebu/dt and in the same time I fixed the title to:
> "ARM: dts: armada-385: add support for the Linksys WRT1900ACS
> (Shelby)"
>
> Gregory
>
Thanks
Ralph
PS: The sort order got mixed with armada-385-synology-ds116.dtb while
merging which got added minutes earlier in arch/arm/boot/dts/Makefile.
PPS: There was also the request of using SPDX tags to v1 after v2 got
merged from Rob Herring and a no by Russell King. I took it as no
action required, you might want to have a look though.
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2] ARM: mvebu: add support for the Linksys WRT1900ACS (Shelby)
2017-03-07 17:48 ` Ralph Sennhauser
(?)
@ 2017-03-08 8:54 ` Gregory CLEMENT
-1 siblings, 0 replies; 15+ messages in thread
From: Gregory CLEMENT @ 2017-03-08 8:54 UTC (permalink / raw)
To: Ralph Sennhauser
Cc: Mark Rutland, Andrew Lunn, Jason Cooper,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Russell King, open list, Rob Herring, Imre Kaloz,
moderated list:ARM PORT, Sebastian Hesselbarth
Hi Ralph,
On mar., mars 07 2017, Ralph Sennhauser <ralph.sennhauser@gmail.com> wrote:
> On Tue, 07 Mar 2017 18:27:21 +0100
> Gregory CLEMENT <gregory.clement@free-electrons.com> wrote:
>>
>> It is now in mvebu/dt and in the same time I fixed the title to:
>> "ARM: dts: armada-385: add support for the Linksys WRT1900ACS
>> (Shelby)"
>>
>> Gregory
>>
>
> Thanks
> Ralph
>
> PS: The sort order got mixed with armada-385-synology-ds116.dtb while
> merging which got added minutes earlier in arch/arm/boot/dts/Makefile.
Thanks for info, I've fixed it now.
>
> PPS: There was also the request of using SPDX tags to v1 after v2 got
> merged from Rob Herring and a no by Russell King. I took it as no
> action required, you might want to have a look though.
I saw this and it was the first time I see this kind of request about
SPDX tags. Given the answer from Russell Kng I don't plan to do
anything for now.
Thanks,
Gregory
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH v2] ARM: mvebu: add support for the Linksys WRT1900ACS (Shelby)
@ 2017-03-08 8:54 ` Gregory CLEMENT
0 siblings, 0 replies; 15+ messages in thread
From: Gregory CLEMENT @ 2017-03-08 8:54 UTC (permalink / raw)
To: Ralph Sennhauser
Cc: Mark Rutland, Andrew Lunn, Jason Cooper,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list, Russell King, Rob Herring, Imre Kaloz,
moderated list:ARM PORT, Sebastian Hesselbarth
Hi Ralph,
On mar., mars 07 2017, Ralph Sennhauser <ralph.sennhauser@gmail.com> wrote:
> On Tue, 07 Mar 2017 18:27:21 +0100
> Gregory CLEMENT <gregory.clement@free-electrons.com> wrote:
>>
>> It is now in mvebu/dt and in the same time I fixed the title to:
>> "ARM: dts: armada-385: add support for the Linksys WRT1900ACS
>> (Shelby)"
>>
>> Gregory
>>
>
> Thanks
> Ralph
>
> PS: The sort order got mixed with armada-385-synology-ds116.dtb while
> merging which got added minutes earlier in arch/arm/boot/dts/Makefile.
Thanks for info, I've fixed it now.
>
> PPS: There was also the request of using SPDX tags to v1 after v2 got
> merged from Rob Herring and a no by Russell King. I took it as no
> action required, you might want to have a look though.
I saw this and it was the first time I see this kind of request about
SPDX tags. Given the answer from Russell Kng I don't plan to do
anything for now.
Thanks,
Gregory
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH v2] ARM: mvebu: add support for the Linksys WRT1900ACS (Shelby)
@ 2017-03-08 8:54 ` Gregory CLEMENT
0 siblings, 0 replies; 15+ messages in thread
From: Gregory CLEMENT @ 2017-03-08 8:54 UTC (permalink / raw)
To: linux-arm-kernel
Hi Ralph,
On mar., mars 07 2017, Ralph Sennhauser <ralph.sennhauser@gmail.com> wrote:
> On Tue, 07 Mar 2017 18:27:21 +0100
> Gregory CLEMENT <gregory.clement@free-electrons.com> wrote:
>>
>> It is now in mvebu/dt and in the same time I fixed the title to:
>> "ARM: dts: armada-385: add support for the Linksys WRT1900ACS
>> (Shelby)"
>>
>> Gregory
>>
>
> Thanks
> Ralph
>
> PS: The sort order got mixed with armada-385-synology-ds116.dtb while
> merging which got added minutes earlier in arch/arm/boot/dts/Makefile.
Thanks for info, I've fixed it now.
>
> PPS: There was also the request of using SPDX tags to v1 after v2 got
> merged from Rob Herring and a no by Russell King. I took it as no
> action required, you might want to have a look though.
I saw this and it was the first time I see this kind of request about
SPDX tags. Given the answer from Russell Kng I don't plan to do
anything for now.
Thanks,
Gregory
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2017-03-08 9:02 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-02-14 19:17 [PATCH v2] ARM: mvebu: add support for the Linksys WRT1900ACS (Shelby) Ralph Sennhauser
2017-02-14 19:17 ` Ralph Sennhauser
2017-02-14 19:17 ` Ralph Sennhauser
2017-02-15 15:18 ` Gregory CLEMENT
2017-02-15 15:18 ` Gregory CLEMENT
2017-02-15 15:18 ` Gregory CLEMENT
2017-03-07 17:27 ` Gregory CLEMENT
2017-03-07 17:27 ` Gregory CLEMENT
2017-03-07 17:27 ` Gregory CLEMENT
2017-03-07 17:48 ` Ralph Sennhauser
2017-03-07 17:48 ` Ralph Sennhauser
2017-03-07 17:48 ` Ralph Sennhauser
2017-03-08 8:54 ` Gregory CLEMENT
2017-03-08 8:54 ` Gregory CLEMENT
2017-03-08 8:54 ` Gregory CLEMENT
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.