* Pxa25x clocks for v3.19
@ 2014-11-15 10:58 Robert Jarzmik
2014-11-17 19:34 ` Mike Turquette
0 siblings, 1 reply; 3+ messages in thread
From: Robert Jarzmik @ 2014-11-15 10:58 UTC (permalink / raw)
To: linux-arm-kernel
Hi Mike,
The pxa25x clocks v3 patch was posted here :
http://www.gossamer-threads.com/lists/linux/kernel/2046264
Even if it would remain dead code for v3.19, I'd need it to get in in that
window so that I can activate at the same time pxa25x and pxa27x for v3.20, and
prevent defconfigs breakage.
Could this code make it for v3.19 ?
Cheers.
--
Robert
PS: The code has been tested on lubbock and tosa hardwares.
^ permalink raw reply [flat|nested] 3+ messages in thread
* Pxa25x clocks for v3.19
2014-11-15 10:58 Pxa25x clocks for v3.19 Robert Jarzmik
@ 2014-11-17 19:34 ` Mike Turquette
2014-11-17 20:06 ` Robert Jarzmik
0 siblings, 1 reply; 3+ messages in thread
From: Mike Turquette @ 2014-11-17 19:34 UTC (permalink / raw)
To: linux-arm-kernel
Quoting Robert Jarzmik (2014-11-15 02:58:30)
> Hi Mike,
>
> The pxa25x clocks v3 patch was posted here :
> http://www.gossamer-threads.com/lists/linux/kernel/2046264
>
> Even if it would remain dead code for v3.19, I'd need it to get in in that
> window so that I can activate at the same time pxa25x and pxa27x for v3.20, and
> prevent defconfigs breakage.
>
> Could this code make it for v3.19 ?
Yes, I've applied it towards 3.19. I guess the missing piece is pxa3xx.
Do you have plans to tackle that for 3.20?
Thanks,
Mike
>
> Cheers.
>
> --
> Robert
>
> PS: The code has been tested on lubbock and tosa hardwares.
^ permalink raw reply [flat|nested] 3+ messages in thread
* Pxa25x clocks for v3.19
2014-11-17 19:34 ` Mike Turquette
@ 2014-11-17 20:06 ` Robert Jarzmik
0 siblings, 0 replies; 3+ messages in thread
From: Robert Jarzmik @ 2014-11-17 20:06 UTC (permalink / raw)
To: linux-arm-kernel
Mike Turquette <mturquette@linaro.org> writes:
> Quoting Robert Jarzmik (2014-11-15 02:58:30)
>> Hi Mike,
>>
>> The pxa25x clocks v3 patch was posted here :
>> http://www.gossamer-threads.com/lists/linux/kernel/2046264
>>
>> Even if it would remain dead code for v3.19, I'd need it to get in in that
>> window so that I can activate at the same time pxa25x and pxa27x for v3.20, and
>> prevent defconfigs breakage.
>>
>> Could this code make it for v3.19 ?
>
> Yes, I've applied it towards 3.19. I guess the missing piece is pxa3xx.
> Do you have plans to tackle that for 3.20?
Rather for 3.21, I don't have any pxa3xx board, and the clock tree is more
complicated. But yes, I do have a plan for that in the near future.
AFAIK, there is not such dependancy between pxa3xx and other variants, contrary
to what happens between pxa25x and pxa27x. That gives me a bit of time to
breathe.
Ah, and thanks for the clk-next clk-fixes cherry-picks.
Cheers.
--
Robert
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2014-11-17 20:06 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-11-15 10:58 Pxa25x clocks for v3.19 Robert Jarzmik
2014-11-17 19:34 ` Mike Turquette
2014-11-17 20:06 ` Robert Jarzmik
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.