[PATCH 0/5] DMA fixes for PS3 device drivers

[PATCH 0/5] DMA fixes for PS3 device drivers

[Geoff Levand]

Hi,

This is a set of patches that fix various DMA related problems in the PS3
device drivers, and add better error checking and improved message logging.

The gelic network driver had a number of problems and most of the changes are
in it's sources.

Please consider.

-Geoff

The following changes since commit 8124c8a6b35386f73523d27eacb71b5364a68c4c:

  Linux 5.13-rc4 (2021-05-30 11:58:25 -1000)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/geoff/ps3-linux.git for-merge-gelic

for you to fetch changes up to 4adcfc9735bf8d1987d2bc82e914be154f2ffad8:

  net/ps3_gelic: Cleanups, improve logging (2021-06-01 12:27:43 -0700)

----------------------------------------------------------------
Geoff Levand (5):
      powerpc/ps3: Add CONFIG_PS3_VERBOSE_RESULT option
      powerpc/ps3: Warn on PS3 device errors
      powerpc/ps3: Add dma_mask to ps3_dma_region
      net/ps3_gelic: Add gelic_descr structures
      net/ps3_gelic: Cleanups, improve logging

 arch/powerpc/include/asm/ps3.h               |   4 +-
 arch/powerpc/platforms/ps3/Kconfig           |   9 +
 arch/powerpc/platforms/ps3/mm.c              |  12 +
 arch/powerpc/platforms/ps3/system-bus.c      |   9 +-
 drivers/net/ethernet/toshiba/ps3_gelic_net.c | 968 +++++++++++++++------------
 drivers/net/ethernet/toshiba/ps3_gelic_net.h |  24 +-
 drivers/ps3/ps3-vuart.c                      |   2 +-
 drivers/ps3/ps3av.c                          |  22 +-
 8 files changed, 598 insertions(+), 452 deletions(-)

-- 
2.25.1

[PATCH 2/5] powerpc/ps3: Warn on PS3 device errors

[Geoff Levand]

To aid debugging PS3 boot problems change the log level
of several PS3 device errors from pr_debug to pr_warn.

Signed-off-by: Geoff Levand <geoff@infradead.org>
---
 arch/powerpc/platforms/ps3/system-bus.c |  9 +++++----
 drivers/ps3/ps3-vuart.c                 |  2 +-
 drivers/ps3/ps3av.c                     | 22 +++++++++++-----------
 3 files changed, 17 insertions(+), 16 deletions(-)

diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c
index b431f41c6cb5..1a5665875165 100644
--- a/arch/powerpc/platforms/ps3/system-bus.c
+++ b/arch/powerpc/platforms/ps3/system-bus.c
@@ -64,9 +64,10 @@ static int ps3_open_hv_device_sb(struct ps3_system_bus_device *dev)
 	result = lv1_open_device(dev->bus_id, dev->dev_id, 0);
 
 	if (result) {
-		pr_debug("%s:%d: lv1_open_device failed: %s\n", __func__,
-			__LINE__, ps3_result(result));
-			result = -EPERM;
+		pr_warn("%s:%d: lv1_open_device dev=%u.%u(%s) failed: %s\n",
+			__func__, __LINE__, dev->match_id, dev->match_sub_id,
+			dev_name(&dev->core), ps3_result(result));
+		result = -EPERM;
 	}
 
 done:
@@ -120,7 +121,7 @@ static int ps3_open_hv_device_gpu(struct ps3_system_bus_device *dev)
 	result = lv1_gpu_open(0);
 
 	if (result) {
-		pr_debug("%s:%d: lv1_gpu_open failed: %s\n", __func__,
+		pr_warn("%s:%d: lv1_gpu_open failed: %s\n", __func__,
 			__LINE__, ps3_result(result));
 			result = -EPERM;
 	}
diff --git a/drivers/ps3/ps3-vuart.c b/drivers/ps3/ps3-vuart.c
index e34ae6a442c7..6328abd51ffa 100644
--- a/drivers/ps3/ps3-vuart.c
+++ b/drivers/ps3/ps3-vuart.c
@@ -358,7 +358,7 @@ static int ps3_vuart_raw_write(struct ps3_system_bus_device *dev,
 		ps3_mm_phys_to_lpar(__pa(buf)), bytes, bytes_written);
 
 	if (result) {
-		dev_dbg(&dev->core, "%s:%d: lv1_write_virtual_uart failed: "
+		dev_warn(&dev->core, "%s:%d: lv1_write_virtual_uart failed: "
 			"%s\n", __func__, __LINE__, ps3_result(result));
 		return result;
 	}
diff --git a/drivers/ps3/ps3av.c b/drivers/ps3/ps3av.c
index 9d66257e1da5..516e6d14d32e 100644
--- a/drivers/ps3/ps3av.c
+++ b/drivers/ps3/ps3av.c
@@ -217,9 +217,9 @@ static int ps3av_send_cmd_pkt(const struct ps3av_send_hdr *send_buf,
 	/* send pkt */
 	res = ps3av_vuart_write(ps3av->dev, send_buf, write_len);
 	if (res < 0) {
-		dev_dbg(&ps3av->dev->core,
-			"%s: ps3av_vuart_write() failed (result=%d)\n",
-			__func__, res);
+		dev_warn(&ps3av->dev->core,
+			"%s:%d: ps3av_vuart_write() failed: %s\n", __func__,
+			__LINE__, ps3_result(res));
 		return res;
 	}
 
@@ -230,9 +230,9 @@ static int ps3av_send_cmd_pkt(const struct ps3av_send_hdr *send_buf,
 		res = ps3av_vuart_read(ps3av->dev, recv_buf, PS3AV_HDR_SIZE,
 				       timeout);
 		if (res != PS3AV_HDR_SIZE) {
-			dev_dbg(&ps3av->dev->core,
-				"%s: ps3av_vuart_read() failed (result=%d)\n",
-				__func__, res);
+			dev_warn(&ps3av->dev->core,
+				"%s:%d: ps3av_vuart_read() failed: %s\n", __func__,
+				__LINE__, ps3_result(res));
 			return res;
 		}
 
@@ -240,9 +240,9 @@ static int ps3av_send_cmd_pkt(const struct ps3av_send_hdr *send_buf,
 		res = ps3av_vuart_read(ps3av->dev, &recv_buf->cid,
 				       recv_buf->size, timeout);
 		if (res < 0) {
-			dev_dbg(&ps3av->dev->core,
-				"%s: ps3av_vuart_read() failed (result=%d)\n",
-				__func__, res);
+			dev_warn(&ps3av->dev->core,
+				"%s:%d: ps3av_vuart_read() failed: %s\n", __func__,
+				__LINE__, ps3_result(res));
 			return res;
 		}
 		res += PS3AV_HDR_SIZE;	/* total len */
@@ -251,8 +251,8 @@ static int ps3av_send_cmd_pkt(const struct ps3av_send_hdr *send_buf,
 	} while (event);
 
 	if ((cmd | PS3AV_REPLY_BIT) != recv_buf->cid) {
-		dev_dbg(&ps3av->dev->core, "%s: reply err (result=%x)\n",
-			__func__, recv_buf->cid);
+		dev_warn(&ps3av->dev->core, "%s:%d: reply err: %x\n", __func__,
+			__LINE__, recv_buf->cid);
 		return -EINVAL;
 	}
 
-- 
2.25.1

[PATCH 1/5] powerpc/ps3: Add CONFIG_PS3_VERBOSE_RESULT option

[Geoff Levand]

To aid debugging, add a new PS3 kernel config option
PS3_VERBOSE_RESULT that, when enabled, will print more
verbose messages for the result of LV1 hypercalls.

Signed-off-by: Geoff Levand <geoff@infradead.org>
---
 arch/powerpc/include/asm/ps3.h     | 2 +-
 arch/powerpc/platforms/ps3/Kconfig | 9 +++++++++
 2 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/include/asm/ps3.h b/arch/powerpc/include/asm/ps3.h
index e646c7f218bc..7df145901def 100644
--- a/arch/powerpc/include/asm/ps3.h
+++ b/arch/powerpc/include/asm/ps3.h
@@ -232,7 +232,7 @@ enum lv1_result {
 
 static inline const char* ps3_result(int result)
 {
-#if defined(DEBUG) || defined(PS3_VERBOSE_RESULT)
+#if defined(DEBUG) || defined(PS3_VERBOSE_RESULT) || defined(CONFIG_PS3_VERBOSE_RESULT)
 	switch (result) {
 	case LV1_SUCCESS:
 		return "LV1_SUCCESS (0)";
diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig
index e32406e918d0..ebed94942d39 100644
--- a/arch/powerpc/platforms/ps3/Kconfig
+++ b/arch/powerpc/platforms/ps3/Kconfig
@@ -85,6 +85,15 @@ config PS3_SYS_MANAGER
 	  This support is required for PS3 system control.  In
 	  general, all users will say Y or M.
 
+config PS3_VERBOSE_RESULT
+	bool "PS3 Verbose LV1 hypercall results" if PS3_ADVANCED
+	depends on PPC_PS3
+	help
+	  Enables more verbose log mesages for LV1 hypercall results.
+
+	  If in doubt, say N here and reduce the size of the kernel by a
+	  small amount.
+
 config PS3_REPOSITORY_WRITE
 	bool "PS3 Repository write support" if PS3_ADVANCED
 	depends on PPC_PS3
-- 
2.25.1

[PATCH 3/5] powerpc/ps3: Add dma_mask to ps3_dma_region

[Geoff Levand]

Commit f959dcd6ddfd29235030e8026471ac1b022ad2b0 (dma-direct: Fix
potential NULL pointer dereference) added a null check on the
dma_mask pointer of the kernel's device structure.

Add a dma_mask variable to the ps3_dma_region structure and set
the device structure's dma_mask pointer to point to this new variable.

Fixes runtime errors like these:

  ps3_system_bus_match:349: dev=8.0(sb_01), drv=8.0(ps3flash): match
  WARNING: CPU: 0 PID: 1 at kernel/dma/mapping.c:151
  ps3flash sb_01: ps3stor_setup:193: map DMA region failed

Signed-off-by: Geoff Levand <geoff@infradead.org>
---
 arch/powerpc/include/asm/ps3.h  |  2 ++
 arch/powerpc/platforms/ps3/mm.c | 12 ++++++++++++
 2 files changed, 14 insertions(+)

diff --git a/arch/powerpc/include/asm/ps3.h b/arch/powerpc/include/asm/ps3.h
index 7df145901def..8a0d8fb35328 100644
--- a/arch/powerpc/include/asm/ps3.h
+++ b/arch/powerpc/include/asm/ps3.h
@@ -71,6 +71,7 @@ struct ps3_dma_region_ops;
  * @bus_addr: The 'translated' bus address of the region.
  * @len: The length in bytes of the region.
  * @offset: The offset from the start of memory of the region.
+ * @dma_mask: Device dma_mask.
  * @ioid: The IOID of the device who owns this region
  * @chunk_list: Opaque variable used by the ioc page manager.
  * @region_ops: struct ps3_dma_region_ops - dma region operations
@@ -85,6 +86,7 @@ struct ps3_dma_region {
 	enum ps3_dma_region_type region_type;
 	unsigned long len;
 	unsigned long offset;
+	u64 dma_mask;
 
 	/* driver variables  (set by ps3_dma_region_create) */
 	unsigned long bus_addr;
diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c
index d094321964fb..a81eac35d900 100644
--- a/arch/powerpc/platforms/ps3/mm.c
+++ b/arch/powerpc/platforms/ps3/mm.c
@@ -6,6 +6,7 @@
  *  Copyright 2006 Sony Corp.
  */
 
+#include <linux/dma-mapping.h>
 #include <linux/kernel.h>
 #include <linux/export.h>
 #include <linux/memblock.h>
@@ -1118,6 +1119,7 @@ int ps3_dma_region_init(struct ps3_system_bus_device *dev,
 	enum ps3_dma_region_type region_type, void *addr, unsigned long len)
 {
 	unsigned long lpar_addr;
+	int result;
 
 	lpar_addr = addr ? ps3_mm_phys_to_lpar(__pa(addr)) : 0;
 
@@ -1129,6 +1131,16 @@ int ps3_dma_region_init(struct ps3_system_bus_device *dev,
 		r->offset -= map.r1.offset;
 	r->len = len ? len : ALIGN(map.total, 1 << r->page_size);
 
+	dev->core.dma_mask = &r->dma_mask;
+
+	result = dma_set_mask_and_coherent(&dev->core, DMA_BIT_MASK(32));
+
+	if (result < 0) {
+		dev_err(&dev->core, "%s:%d: dma_set_mask_and_coherent failed: %d\n",
+			__func__, __LINE__, result);
+		return result;
+	}
+
 	switch (dev->dev_type) {
 	case PS3_DEVICE_TYPE_SB:
 		r->region_ops =  (USE_DYNAMIC_DMA)
-- 
2.25.1

[PATCH 4/5] net/ps3_gelic: Add gelic_descr structures

[Geoff Levand]

Create two new structures, struct gelic_hw_regs and struct gelic_chain_link,
and replace the corresponding members of struct gelic_descr with the new
structures.  struct gelic_hw_regs holds the register variables used by the
gelic hardware device.  struct gelic_chain_link holds variables used to
manage the driver's linked list of gelic descr structures.

Fixes several DMA mapping problems with the PS3's gelic network driver:

 * Change from checking the return value of dma_map_single to using the
   dma_mapping_error routine.
 * Use the correct buffer length when mapping the RX skb.
 * Improved error checking and debug logging.

Fixes runtime errors like these, and also other randomly occurring errors:

  IP-Config: Complete:
  DMA-API: ps3_gelic_driver sb_05: device driver failed to check map error
  WARNING: CPU: 0 PID: 0 at kernel/dma/debug.c:1027 .check_unmap+0x888/0x8dc

Signed-off-by: Geoff Levand <geoff@infradead.org>
---
 drivers/net/ethernet/toshiba/ps3_gelic_net.c | 573 +++++++++++--------
 drivers/net/ethernet/toshiba/ps3_gelic_net.h |  24 +-
 2 files changed, 341 insertions(+), 256 deletions(-)

diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.c b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
index 55e652624bd7..e01938128882 100644
--- a/drivers/net/ethernet/toshiba/ps3_gelic_net.c
+++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
@@ -96,9 +96,11 @@ static void gelic_card_get_ether_port_status(struct gelic_card *card,
  * returns the status as in the dmac_cmd_status field of the descriptor
  */
 static enum gelic_descr_dma_status
+
 gelic_descr_get_status(struct gelic_descr *descr)
 {
-	return be32_to_cpu(descr->dmac_cmd_status) & GELIC_DESCR_DMA_STAT_MASK;
+	return be32_to_cpu(descr->hw_regs.dmac_cmd_status)
+		& GELIC_DESCR_DMA_STAT_MASK;
 }
 
 static int gelic_card_set_link_mode(struct gelic_card *card, int mode)
@@ -146,24 +148,34 @@ static void gelic_card_disable_txdmac(struct gelic_card *card)
  */
 static void gelic_card_enable_rxdmac(struct gelic_card *card)
 {
+	struct device *dev = ctodev(card);
 	int status;
+#if defined(DEBUG)
+	static const int debug_build = 1;
+#else
+	static const int debug_build = 0;
+#endif
 
-#ifdef DEBUG
-	if (gelic_descr_get_status(card->rx_chain.head) !=
-	    GELIC_DESCR_DMA_CARDOWNED) {
-		printk(KERN_ERR "%s: status=%x\n", __func__,
-		       be32_to_cpu(card->rx_chain.head->dmac_cmd_status));
-		printk(KERN_ERR "%s: nextphy=%x\n", __func__,
-		       be32_to_cpu(card->rx_chain.head->next_descr_addr));
-		printk(KERN_ERR "%s: head=%p\n", __func__,
-		       card->rx_chain.head);
+	if (debug_build
+		&& (gelic_descr_get_status(card->rx_chain.head)
+			!= GELIC_DESCR_DMA_CARDOWNED)) {
+		dev_err(dev, "%s:%d: status=%x\n", __func__, __LINE__,
+			be32_to_cpu(
+				card->rx_chain.head->hw_regs.dmac_cmd_status));
+		dev_err(dev, "%s:%d: nextphy=%x\n", __func__, __LINE__,
+			be32_to_cpu(
+				card->rx_chain.head->hw_regs.next_descr_addr));
+		dev_err(dev, "%s:%d: head=%px\n", __func__, __LINE__,
+			card->rx_chain.head);
 	}
-#endif
+
 	status = lv1_net_start_rx_dma(bus_id(card), dev_id(card),
-				card->rx_chain.head->bus_addr, 0);
-	if (status)
-		dev_info(ctodev(card),
-			 "lv1_net_start_rx_dma failed, status=%d\n", status);
+		card->rx_chain.head->link.cpu_addr, 0);
+
+	if (status) {
+		dev_err(dev, "%s:%d: lv1_net_start_rx_dma failed: %d\n",
+			__func__, __LINE__, status);
+	}
 }
 
 /**
@@ -193,11 +205,11 @@ static void gelic_card_disable_rxdmac(struct gelic_card *card)
  * in the status
  */
 static void gelic_descr_set_status(struct gelic_descr *descr,
-				   enum gelic_descr_dma_status status)
+	enum gelic_descr_dma_status status)
 {
-	descr->dmac_cmd_status = cpu_to_be32(status |
-			(be32_to_cpu(descr->dmac_cmd_status) &
-			 ~GELIC_DESCR_DMA_STAT_MASK));
+	descr->hw_regs.dmac_cmd_status = cpu_to_be32(status
+		| (be32_to_cpu(descr->hw_regs.dmac_cmd_status)
+		& ~GELIC_DESCR_DMA_STAT_MASK));
 	/*
 	 * dma_cmd_status field is used to indicate whether the descriptor
 	 * is valid or not.
@@ -224,13 +236,14 @@ static void gelic_card_reset_chain(struct gelic_card *card,
 
 	for (descr = start_descr; start_descr != descr->next; descr++) {
 		gelic_descr_set_status(descr, GELIC_DESCR_DMA_CARDOWNED);
-		descr->next_descr_addr = cpu_to_be32(descr->next->bus_addr);
+		descr->hw_regs.next_descr_addr
+			= cpu_to_be32(descr->next->link.cpu_addr);
 	}
 
 	chain->head = start_descr;
 	chain->tail = (descr - 1);
 
-	(descr - 1)->next_descr_addr = 0;
+	(descr - 1)->hw_regs.next_descr_addr = 0;
 }
 
 void gelic_card_up(struct gelic_card *card)
@@ -276,20 +289,35 @@ void gelic_card_down(struct gelic_card *card)
 	pr_debug("%s: done\n", __func__);
 }
 
+static void gelic_unmap_link(struct device *dev, struct gelic_descr *descr)
+{
+	BUG_ON(descr->hw_regs.payload.dev_addr);
+	BUG_ON(descr->hw_regs.payload.size);
+
+	BUG_ON(!descr->link.cpu_addr);
+	BUG_ON(!descr->link.size);
+
+	dma_unmap_single(dev, descr->link.cpu_addr, descr->link.size,
+		DMA_BIDIRECTIONAL);
+
+	descr->link.cpu_addr = 0;
+	descr->link.size = 0;
+}
+
 /**
  * gelic_card_free_chain - free descriptor chain
  * @card: card structure
  * @descr_in: address of desc
  */
 static void gelic_card_free_chain(struct gelic_card *card,
-				  struct gelic_descr *descr_in)
+	struct gelic_descr *descr_in)
 {
+	struct device *dev = ctodev(card);
 	struct gelic_descr *descr;
 
-	for (descr = descr_in; descr && descr->bus_addr; descr = descr->next) {
-		dma_unmap_single(ctodev(card), descr->bus_addr,
-				 GELIC_DESCR_SIZE, DMA_BIDIRECTIONAL);
-		descr->bus_addr = 0;
+	for (descr = descr_in; descr && descr->link.cpu_addr;
+		descr = descr->next) {
+		gelic_unmap_link(dev, descr);
 	}
 }
 
@@ -298,7 +326,7 @@ static void gelic_card_free_chain(struct gelic_card *card,
  * @card: card structure
  * @chain: address of chain
  * @start_descr: address of descriptor array
- * @no: number of descriptors
+ * @descr_count: number of descriptors
  *
  * we manage a circular list that mirrors the hardware structure,
  * except that the hardware uses bus addresses.
@@ -306,54 +334,57 @@ static void gelic_card_free_chain(struct gelic_card *card,
  * returns 0 on success, <0 on failure
  */
 static int gelic_card_init_chain(struct gelic_card *card,
-				 struct gelic_descr_chain *chain,
-				 struct gelic_descr *start_descr, int no)
+	struct gelic_descr_chain *chain, struct gelic_descr *start_descr,
+	int descr_count)
 {
-	int i;
-	struct gelic_descr *descr;
+	struct gelic_descr *descr = start_descr;
+	struct device *dev = ctodev(card);
+	unsigned int index;
 
-	descr = start_descr;
-	memset(descr, 0, sizeof(*descr) * no);
+	memset(start_descr, 0, descr_count * sizeof(*start_descr));
 
-	/* set up the hardware pointers in each descriptor */
-	for (i = 0; i < no; i++, descr++) {
+	for (index = 0, descr = start_descr; index < descr_count;
+		index++, descr++) {
 		gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
-		descr->bus_addr =
-			dma_map_single(ctodev(card), descr,
-				       GELIC_DESCR_SIZE,
-				       DMA_BIDIRECTIONAL);
 
-		if (!descr->bus_addr)
-			goto iommu_error;
+		descr->link.size = sizeof(struct gelic_hw_regs);
+		descr->link.cpu_addr = dma_map_single(dev, descr,
+			descr->link.size, DMA_BIDIRECTIONAL);
+
+		if (unlikely(dma_mapping_error(dev, descr->link.cpu_addr))) {
+			dev_err(dev, "%s:%d: dma_mapping_error\n", __func__,
+				__LINE__);
+
+			for (index--, descr--; index > 0; index--, descr--) {
+				if (descr->link.cpu_addr) {
+					gelic_unmap_link(dev, descr);
+				}
+			}
+			return -ENOMEM;
+		}
 
 		descr->next = descr + 1;
 		descr->prev = descr - 1;
 	}
-	/* make them as ring */
+
 	(descr - 1)->next = start_descr;
 	start_descr->prev = (descr - 1);
 
 	/* chain bus addr of hw descriptor */
-	descr = start_descr;
-	for (i = 0; i < no; i++, descr++) {
-		descr->next_descr_addr = cpu_to_be32(descr->next->bus_addr);
+
+	for (index = 0, descr = start_descr; index < descr_count;
+		index++, descr++) {
+		descr->hw_regs.next_descr_addr
+			= cpu_to_be32(descr->next->link.cpu_addr);
 	}
 
 	chain->head = start_descr;
 	chain->tail = start_descr;
 
 	/* do not chain last hw descriptor */
-	(descr - 1)->next_descr_addr = 0;
+	(descr - 1)->hw_regs.next_descr_addr = 0;
 
 	return 0;
-
-iommu_error:
-	for (i--, descr--; 0 <= i; i--, descr--)
-		if (descr->bus_addr)
-			dma_unmap_single(ctodev(card), descr->bus_addr,
-					 GELIC_DESCR_SIZE,
-					 DMA_BIDIRECTIONAL);
-	return -ENOMEM;
 }
 
 /**
@@ -367,49 +398,66 @@ static int gelic_card_init_chain(struct gelic_card *card,
  * Activate the descriptor state-wise
  */
 static int gelic_descr_prepare_rx(struct gelic_card *card,
-				  struct gelic_descr *descr)
+	struct gelic_descr *descr)
 {
-	int offset;
-	unsigned int bufsize;
+	struct device *dev = ctodev(card);
+	struct aligned_buff {
+		unsigned int total_bytes;
+		unsigned int offset;
+	};
+	struct aligned_buff a_buf;
+	dma_addr_t cpu_addr;
+
+	if (gelic_descr_get_status(descr) !=  GELIC_DESCR_DMA_NOT_IN_USE) {
+		dev_err(dev, "%s:%d: ERROR status\n", __func__, __LINE__);
+	}
 
-	if (gelic_descr_get_status(descr) !=  GELIC_DESCR_DMA_NOT_IN_USE)
-		dev_info(ctodev(card), "%s: ERROR status\n", __func__);
-	/* we need to round up the buffer size to a multiple of 128 */
-	bufsize = ALIGN(GELIC_NET_MAX_MTU, GELIC_NET_RXBUF_ALIGN);
+	a_buf.total_bytes = ALIGN(GELIC_NET_MAX_MTU, GELIC_NET_RXBUF_ALIGN)
+		+ GELIC_NET_RXBUF_ALIGN;
+
+	descr->skb = dev_alloc_skb(a_buf.total_bytes);
 
-	/* and we need to have it 128 byte aligned, therefore we allocate a
-	 * bit more */
-	descr->skb = dev_alloc_skb(bufsize + GELIC_NET_RXBUF_ALIGN - 1);
 	if (!descr->skb) {
-		descr->buf_addr = 0; /* tell DMAC don't touch memory */
+		descr->hw_regs.payload.dev_addr = 0;
+		descr->hw_regs.payload.size = 0;
 		return -ENOMEM;
 	}
-	descr->buf_size = cpu_to_be32(bufsize);
-	descr->dmac_cmd_status = 0;
-	descr->result_size = 0;
-	descr->valid_size = 0;
-	descr->data_error = 0;
-
-	offset = ((unsigned long)descr->skb->data) &
-		(GELIC_NET_RXBUF_ALIGN - 1);
-	if (offset)
-		skb_reserve(descr->skb, GELIC_NET_RXBUF_ALIGN - offset);
-	/* io-mmu-map the skb */
-	descr->buf_addr = cpu_to_be32(dma_map_single(ctodev(card),
-						     descr->skb->data,
-						     GELIC_NET_MAX_MTU,
-						     DMA_FROM_DEVICE));
-	if (!descr->buf_addr) {
+
+	a_buf.offset = PTR_ALIGN(descr->skb->data, GELIC_NET_RXBUF_ALIGN)
+		- descr->skb->data;
+
+	if (a_buf.offset) {
+		dev_dbg(dev, "%s:%d: offset=%u\n", __func__, __LINE__,
+			a_buf.offset);
+		skb_reserve(descr->skb, a_buf.offset);
+	}
+
+	descr->hw_regs.dmac_cmd_status = 0;
+	descr->hw_regs.result_size = 0;
+	descr->hw_regs.valid_size = 0;
+	descr->hw_regs.data_error = 0;
+
+	descr->hw_regs.payload.size = a_buf.total_bytes - a_buf.offset;
+	cpu_addr = dma_map_single(dev, descr->skb->data,
+		descr->hw_regs.payload.size, DMA_FROM_DEVICE);
+	descr->hw_regs.payload.dev_addr = cpu_to_be32(cpu_addr);
+
+	if (unlikely(dma_mapping_error(dev, cpu_addr))) {
+		dev_err(dev, "%s:%d: dma_mapping_error\n", __func__, __LINE__);
+
+		descr->hw_regs.payload.dev_addr = 0;
+		descr->hw_regs.payload.size = 0;
+
 		dev_kfree_skb_any(descr->skb);
 		descr->skb = NULL;
-		dev_info(ctodev(card),
-			 "%s:Could not iommu-map rx buffer\n", __func__);
+
 		gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
+
 		return -ENOMEM;
-	} else {
-		gelic_descr_set_status(descr, GELIC_DESCR_DMA_CARDOWNED);
-		return 0;
 	}
+
+	gelic_descr_set_status(descr, GELIC_DESCR_DMA_CARDOWNED);
+	return 0;
 }
 
 /**
@@ -420,19 +468,24 @@ static int gelic_descr_prepare_rx(struct gelic_card *card,
 static void gelic_card_release_rx_chain(struct gelic_card *card)
 {
 	struct gelic_descr *descr = card->rx_chain.head;
+	struct device *dev = ctodev(card);
 
 	do {
 		if (descr->skb) {
-			dma_unmap_single(ctodev(card),
-					 be32_to_cpu(descr->buf_addr),
-					 descr->skb->len,
-					 DMA_FROM_DEVICE);
-			descr->buf_addr = 0;
+			dma_unmap_single(dev,
+				be32_to_cpu(descr->hw_regs.payload.dev_addr),
+				descr->hw_regs.payload.size, DMA_FROM_DEVICE);
+
 			dev_kfree_skb_any(descr->skb);
 			descr->skb = NULL;
+
 			gelic_descr_set_status(descr,
-					       GELIC_DESCR_DMA_NOT_IN_USE);
+				GELIC_DESCR_DMA_NOT_IN_USE);
 		}
+
+		descr->hw_regs.payload.dev_addr = 0;
+		descr->hw_regs.payload.size = 0;
+
 		descr = descr->next;
 	} while (descr != card->rx_chain.head);
 }
@@ -489,26 +542,29 @@ static int gelic_card_alloc_rx_skbs(struct gelic_card *card)
  * releases a used tx descriptor (unmapping, freeing of skb)
  */
 static void gelic_descr_release_tx(struct gelic_card *card,
-				       struct gelic_descr *descr)
+	struct gelic_descr *descr)
 {
 	struct sk_buff *skb = descr->skb;
+	struct device *dev = ctodev(card);
 
-	BUG_ON(!(be32_to_cpu(descr->data_status) & GELIC_DESCR_TX_TAIL));
+	BUG_ON(!(be32_to_cpu(descr->hw_regs.data_status)
+		& GELIC_DESCR_TX_TAIL));
 
-	dma_unmap_single(ctodev(card), be32_to_cpu(descr->buf_addr), skb->len,
-			 DMA_TO_DEVICE);
-	dev_kfree_skb_any(skb);
+	dma_unmap_single(dev, be32_to_cpu(descr->hw_regs.payload.dev_addr),
+		descr->hw_regs.payload.size, DMA_TO_DEVICE);
+
+	descr->hw_regs.payload.dev_addr = 0;
+	descr->hw_regs.payload.size = 0;
 
-	descr->buf_addr = 0;
-	descr->buf_size = 0;
-	descr->next_descr_addr = 0;
-	descr->result_size = 0;
-	descr->valid_size = 0;
-	descr->data_status = 0;
-	descr->data_error = 0;
+	dev_kfree_skb_any(skb);
 	descr->skb = NULL;
 
-	/* set descr status */
+	descr->hw_regs.next_descr_addr = 0;
+	descr->hw_regs.result_size = 0;
+	descr->hw_regs.valid_size = 0;
+	descr->hw_regs.data_status = 0;
+	descr->hw_regs.data_error = 0;
+
 	gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
 }
 
@@ -536,48 +592,53 @@ static void gelic_card_wake_queues(struct gelic_card *card)
 static void gelic_card_release_tx_chain(struct gelic_card *card, int stop)
 {
 	struct gelic_descr_chain *tx_chain;
-	enum gelic_descr_dma_status status;
-	struct net_device *netdev;
-	int release = 0;
+	struct device *dev = ctodev(card);
+	int release;
 
-	for (tx_chain = &card->tx_chain;
+	for (release = 0, tx_chain = &card->tx_chain;
 	     tx_chain->head != tx_chain->tail && tx_chain->tail;
 	     tx_chain->tail = tx_chain->tail->next) {
-		status = gelic_descr_get_status(tx_chain->tail);
-		netdev = tx_chain->tail->skb->dev;
+		enum gelic_descr_dma_status status;
+		struct gelic_descr *descr;
+		struct net_device *netdev;
+
+		descr = tx_chain->tail;
+		status= gelic_descr_get_status(descr);
+		netdev = descr->skb->dev;
+
 		switch (status) {
 		case GELIC_DESCR_DMA_RESPONSE_ERROR:
 		case GELIC_DESCR_DMA_PROTECTION_ERROR:
 		case GELIC_DESCR_DMA_FORCE_END:
-			if (printk_ratelimit())
-				dev_info(ctodev(card),
-					 "%s: forcing end of tx descriptor " \
-					 "with status %x\n",
-					 __func__, status);
+			if (printk_ratelimit()) {
+				dev_info(dev,
+					 "%s:%d: forcing end of tx descriptor with status %x\n",
+					 __func__, __LINE__, status);
+			}
 			netdev->stats.tx_dropped++;
 			break;
 
 		case GELIC_DESCR_DMA_COMPLETE:
-			if (tx_chain->tail->skb) {
+			if (descr->skb) {
 				netdev->stats.tx_packets++;
-				netdev->stats.tx_bytes +=
-					tx_chain->tail->skb->len;
+				netdev->stats.tx_bytes += descr->skb->len;
 			}
 			break;
 
 		case GELIC_DESCR_DMA_CARDOWNED:
-			/* pending tx request */
 		default:
-			/* any other value (== GELIC_DESCR_DMA_NOT_IN_USE) */
-			if (!stop)
+			if (!stop) {
 				goto out;
+			}
 		}
-		gelic_descr_release_tx(card, tx_chain->tail);
-		release ++;
+
+		gelic_descr_release_tx(card, descr);
+		release++;
 	}
 out:
-	if (!stop && release)
+	if (!stop && release) {
 		gelic_card_wake_queues(card);
+	}
 }
 
 /**
@@ -695,30 +756,30 @@ gelic_card_get_next_tx_descr(struct gelic_card *card)
  * has executed before.
  */
 static void gelic_descr_set_tx_cmdstat(struct gelic_descr *descr,
-				       struct sk_buff *skb)
+	struct sk_buff *skb)
 {
 	if (skb->ip_summed != CHECKSUM_PARTIAL)
-		descr->dmac_cmd_status =
+		descr->hw_regs.dmac_cmd_status =
 			cpu_to_be32(GELIC_DESCR_DMA_CMD_NO_CHKSUM |
-				    GELIC_DESCR_TX_DMA_FRAME_TAIL);
+				GELIC_DESCR_TX_DMA_FRAME_TAIL);
 	else {
 		/* is packet ip?
 		 * if yes: tcp? udp? */
 		if (skb->protocol == htons(ETH_P_IP)) {
 			if (ip_hdr(skb)->protocol == IPPROTO_TCP)
-				descr->dmac_cmd_status =
+				descr->hw_regs.dmac_cmd_status =
 				cpu_to_be32(GELIC_DESCR_DMA_CMD_TCP_CHKSUM |
 					    GELIC_DESCR_TX_DMA_FRAME_TAIL);
 
 			else if (ip_hdr(skb)->protocol == IPPROTO_UDP)
-				descr->dmac_cmd_status =
+				descr->hw_regs.dmac_cmd_status =
 				cpu_to_be32(GELIC_DESCR_DMA_CMD_UDP_CHKSUM |
 					    GELIC_DESCR_TX_DMA_FRAME_TAIL);
 			else	/*
 				 * the stack should checksum non-tcp and non-udp
 				 * packets on his own: NETIF_F_IP_CSUM
 				 */
-				descr->dmac_cmd_status =
+				descr->hw_regs.dmac_cmd_status =
 				cpu_to_be32(GELIC_DESCR_DMA_CMD_NO_CHKSUM |
 					    GELIC_DESCR_TX_DMA_FRAME_TAIL);
 		}
@@ -760,37 +821,41 @@ static struct sk_buff *gelic_put_vlan_tag(struct sk_buff *skb,
  *
  */
 static int gelic_descr_prepare_tx(struct gelic_card *card,
-				  struct gelic_descr *descr,
-				  struct sk_buff *skb)
+	struct gelic_descr *descr, struct sk_buff *skb)
 {
-	dma_addr_t buf;
+	struct device *dev = ctodev(card);
+	dma_addr_t cpu_addr;
 
 	if (card->vlan_required) {
 		struct sk_buff *skb_tmp;
 		enum gelic_port_type type;
 
 		type = netdev_port(skb->dev)->type;
-		skb_tmp = gelic_put_vlan_tag(skb,
-					     card->vlan[type].tx);
-		if (!skb_tmp)
+		skb_tmp = gelic_put_vlan_tag(skb, card->vlan[type].tx);
+
+		if (!skb_tmp) {
 			return -ENOMEM;
+		}
+
 		skb = skb_tmp;
 	}
 
-	buf = dma_map_single(ctodev(card), skb->data, skb->len, DMA_TO_DEVICE);
+	descr->hw_regs.payload.size = skb->len;
+	cpu_addr = dma_map_single(dev, skb->data, descr->hw_regs.payload.size,
+		DMA_TO_DEVICE);
+	descr->hw_regs.payload.dev_addr = cpu_to_be32(cpu_addr);
 
-	if (!buf) {
-		dev_err(ctodev(card),
-			"dma map 2 failed (%p, %i). Dropping packet\n",
-			skb->data, skb->len);
+	if (unlikely(dma_mapping_error(dev, cpu_addr))) {
+		dev_err(dev, "%s:%d: dma_mapping_error\n", __func__, __LINE__);
+
+		descr->hw_regs.payload.dev_addr = 0;
+		descr->hw_regs.payload.size = 0;
 		return -ENOMEM;
 	}
 
-	descr->buf_addr = cpu_to_be32(buf);
-	descr->buf_size = cpu_to_be32(skb->len);
 	descr->skb = skb;
-	descr->data_status = 0;
-	descr->next_descr_addr = 0; /* terminate hw descr */
+	descr->hw_regs.data_status = 0;
+	descr->hw_regs.next_descr_addr = 0; /* terminate hw descr */
 	gelic_descr_set_tx_cmdstat(descr, skb);
 
 	/* bump free descriptor pointer */
@@ -805,8 +870,9 @@ static int gelic_descr_prepare_tx(struct gelic_card *card,
  *
  */
 static int gelic_card_kick_txdma(struct gelic_card *card,
-				 struct gelic_descr *descr)
+	struct gelic_descr *descr)
 {
+	struct device *dev = ctodev(card);
 	int status = 0;
 
 	if (card->tx_dma_progress)
@@ -815,11 +881,11 @@ static int gelic_card_kick_txdma(struct gelic_card *card,
 	if (gelic_descr_get_status(descr) == GELIC_DESCR_DMA_CARDOWNED) {
 		card->tx_dma_progress = 1;
 		status = lv1_net_start_tx_dma(bus_id(card), dev_id(card),
-					      descr->bus_addr, 0);
+					      descr->link.cpu_addr, 0);
 		if (status) {
 			card->tx_dma_progress = 0;
-			dev_info(ctodev(card), "lv1_net_start_txdma failed," \
-				 "status=%d\n", status);
+			dev_info(dev, "%s:%d: lv1_net_start_txdma failed: %d\n",
+				__func__, __LINE__, status);
 		}
 	}
 	return status;
@@ -835,6 +901,7 @@ static int gelic_card_kick_txdma(struct gelic_card *card,
 netdev_tx_t gelic_net_xmit(struct sk_buff *skb, struct net_device *netdev)
 {
 	struct gelic_card *card = netdev_card(netdev);
+	struct device *dev = ctodev(card);
 	struct gelic_descr *descr;
 	int result;
 	unsigned long flags;
@@ -868,7 +935,9 @@ netdev_tx_t gelic_net_xmit(struct sk_buff *skb, struct net_device *netdev)
 	 * link this prepared descriptor to previous one
 	 * to achieve high performance
 	 */
-	descr->prev->next_descr_addr = cpu_to_be32(descr->bus_addr);
+	descr->prev->hw_regs.next_descr_addr
+		= cpu_to_be32(descr->link.cpu_addr);
+
 	/*
 	 * as hardware descriptor is modified in the above lines,
 	 * ensure that the hardware sees it
@@ -881,13 +950,13 @@ netdev_tx_t gelic_net_xmit(struct sk_buff *skb, struct net_device *netdev)
 		 */
 		netdev->stats.tx_dropped++;
 		/* don't trigger BUG_ON() in gelic_descr_release_tx */
-		descr->data_status = cpu_to_be32(GELIC_DESCR_TX_TAIL);
+		descr->hw_regs.data_status = cpu_to_be32(GELIC_DESCR_TX_TAIL);
 		gelic_descr_release_tx(card, descr);
 		/* reset head */
 		card->tx_chain.head = descr;
 		/* reset hw termination */
-		descr->prev->next_descr_addr = 0;
-		dev_info(ctodev(card), "%s: kick failure\n", __func__);
+		descr->prev->hw_regs.next_descr_addr = 0;
+		dev_info(dev, "%s:%d: kick failure\n", __func__, __LINE__);
 	}
 
 	spin_unlock_irqrestore(&card->tx_lock, flags);
@@ -904,28 +973,29 @@ netdev_tx_t gelic_net_xmit(struct sk_buff *skb, struct net_device *netdev)
  * stack. The descriptor state is not changed.
  */
 static void gelic_net_pass_skb_up(struct gelic_descr *descr,
-				  struct gelic_card *card,
-				  struct net_device *netdev)
-
+	struct gelic_card *card, struct net_device *netdev)
 {
+	struct device *dev = ctodev(card);
 	struct sk_buff *skb = descr->skb;
 	u32 data_status, data_error;
 
-	data_status = be32_to_cpu(descr->data_status);
-	data_error = be32_to_cpu(descr->data_error);
-	/* unmap skb buffer */
-	dma_unmap_single(ctodev(card), be32_to_cpu(descr->buf_addr),
-			 GELIC_NET_MAX_MTU,
-			 DMA_FROM_DEVICE);
-
-	skb_put(skb, be32_to_cpu(descr->valid_size)?
-		be32_to_cpu(descr->valid_size) :
-		be32_to_cpu(descr->result_size));
-	if (!descr->valid_size)
-		dev_info(ctodev(card), "buffer full %x %x %x\n",
-			 be32_to_cpu(descr->result_size),
-			 be32_to_cpu(descr->buf_size),
-			 be32_to_cpu(descr->dmac_cmd_status));
+	data_status = be32_to_cpu(descr->hw_regs.data_status);
+	data_error = be32_to_cpu(descr->hw_regs.data_error);
+
+	dma_unmap_single(dev, be32_to_cpu(descr->hw_regs.payload.dev_addr),
+		descr->hw_regs.payload.size, DMA_FROM_DEVICE);
+
+	skb_put(skb, be32_to_cpu(descr->hw_regs.valid_size)?
+		be32_to_cpu(descr->hw_regs.valid_size) :
+		be32_to_cpu(descr->hw_regs.result_size));
+
+	if (!descr->hw_regs.valid_size) {
+		dev_err(dev, "%s:%d: buffer full %x %x %x\n", __func__,
+			__LINE__,
+			 be32_to_cpu(descr->hw_regs.result_size),
+			 be32_to_cpu(descr->hw_regs.payload.size),
+			 be32_to_cpu(descr->hw_regs.dmac_cmd_status));
+	}
 
 	descr->skb = NULL;
 	/*
@@ -964,9 +1034,10 @@ static void gelic_net_pass_skb_up(struct gelic_descr *descr,
  */
 static int gelic_card_decode_one_descr(struct gelic_card *card)
 {
-	enum gelic_descr_dma_status status;
 	struct gelic_descr_chain *chain = &card->rx_chain;
 	struct gelic_descr *descr = chain->head;
+	enum gelic_descr_dma_status status;
+	struct device *dev = ctodev(card);
 	struct net_device *netdev = NULL;
 	int dmac_chain_ended;
 
@@ -976,7 +1047,8 @@ static int gelic_card_decode_one_descr(struct gelic_card *card)
 		return 0;
 
 	if (status == GELIC_DESCR_DMA_NOT_IN_USE) {
-		dev_dbg(ctodev(card), "dormant descr? %p\n", descr);
+		dev_dbg(dev, "%s:%d: dormant descr? %px\n", __func__, __LINE__,
+			descr);
 		return 0;
 	}
 
@@ -992,7 +1064,8 @@ static int gelic_card_decode_one_descr(struct gelic_card *card)
 			}
 		}
 		if (GELIC_PORT_MAX <= i) {
-			pr_info("%s: unknown packet vid=%x\n", __func__, vid);
+			dev_info(dev, "%s:%d: unknown packet vid=%x\n",
+				__func__, __LINE__, vid);
 			goto refill;
 		}
 	} else
@@ -1001,8 +1074,8 @@ static int gelic_card_decode_one_descr(struct gelic_card *card)
 	if ((status == GELIC_DESCR_DMA_RESPONSE_ERROR) ||
 	    (status == GELIC_DESCR_DMA_PROTECTION_ERROR) ||
 	    (status == GELIC_DESCR_DMA_FORCE_END)) {
-		dev_info(ctodev(card), "dropping RX descriptor with state %x\n",
-			 status);
+		dev_info(dev, "%s:%d: dropping RX descriptor with state %x\n",
+			__func__, __LINE__, status);
 		netdev->stats.rx_dropped++;
 		goto refill;
 	}
@@ -1017,7 +1090,7 @@ static int gelic_card_decode_one_descr(struct gelic_card *card)
 		 * Anyway this frame was longer than the MTU,
 		 * just drop it.
 		 */
-		dev_info(ctodev(card), "overlength frame\n");
+		dev_info(dev, "%s:%d: overlength frame\n", __func__, __LINE__);
 		goto refill;
 	}
 	/*
@@ -1025,8 +1098,8 @@ static int gelic_card_decode_one_descr(struct gelic_card *card)
 	 * be treated as error.
 	 */
 	if (status != GELIC_DESCR_DMA_FRAME_END) {
-		dev_dbg(ctodev(card), "RX descriptor with state %x\n",
-			status);
+		dev_dbg(dev, "%s:%d: RX descriptor with state %x\n", __func__,
+			__LINE__, status);
 		goto refill;
 	}
 
@@ -1035,15 +1108,14 @@ static int gelic_card_decode_one_descr(struct gelic_card *card)
 refill:
 
 	/* is the current descriptor terminated with next_descr == NULL? */
-	dmac_chain_ended =
-		be32_to_cpu(descr->dmac_cmd_status) &
+	dmac_chain_ended = be32_to_cpu(descr->hw_regs.dmac_cmd_status) &
 		GELIC_DESCR_RX_DMA_CHAIN_END;
 	/*
 	 * So that always DMAC can see the end
 	 * of the descriptor chain to avoid
 	 * from unwanted DMAC overrun.
 	 */
-	descr->next_descr_addr = 0;
+	descr->hw_regs.next_descr_addr = 0;
 
 	/* change the descriptor state: */
 	gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
@@ -1060,15 +1132,17 @@ static int gelic_card_decode_one_descr(struct gelic_card *card)
 	/*
 	 * Set this descriptor the end of the chain.
 	 */
-	descr->prev->next_descr_addr = cpu_to_be32(descr->bus_addr);
+	descr->prev->hw_regs.next_descr_addr
+		= cpu_to_be32(descr->link.cpu_addr);
 
 	/*
 	 * If dmac chain was met, DMAC stopped.
 	 * thus re-enable it
 	 */
 
-	if (dmac_chain_ended)
+	if (dmac_chain_ended) {
 		gelic_card_enable_rxdmac(card);
+	}
 
 	return 1;
 }
@@ -1192,9 +1266,10 @@ void gelic_net_get_drvinfo(struct net_device *netdev,
 }
 
 static int gelic_ether_get_link_ksettings(struct net_device *netdev,
-					  struct ethtool_link_ksettings *cmd)
+	struct ethtool_link_ksettings *cmd)
 {
 	struct gelic_card *card = netdev_card(netdev);
+	struct device *dev = ctodev(card);
 	u32 supported, advertising;
 
 	gelic_card_get_ether_port_status(card, 0);
@@ -1215,16 +1290,17 @@ static int gelic_ether_get_link_ksettings(struct net_device *netdev,
 		cmd->base.speed = SPEED_1000;
 		break;
 	default:
-		pr_info("%s: speed unknown\n", __func__);
+		dev_dbg(dev, "%s:%d: speed unknown\n", __func__, __LINE__);
 		cmd->base.speed = SPEED_10;
 		break;
 	}
 
 	supported = SUPPORTED_TP | SUPPORTED_Autoneg |
-			SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
-			SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
-			SUPPORTED_1000baseT_Full;
+		SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
+		SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
+		SUPPORTED_1000baseT_Full;
 	advertising = supported;
+
 	if (card->link_mode & GELIC_LV1_ETHER_AUTO_NEG) {
 		cmd->base.autoneg = AUTONEG_ENABLE;
 	} else {
@@ -1234,9 +1310,9 @@ static int gelic_ether_get_link_ksettings(struct net_device *netdev,
 	cmd->base.port = PORT_TP;
 
 	ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
-						supported);
+		supported);
 	ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
-						advertising);
+		advertising);
 
 	return 0;
 }
@@ -1637,130 +1713,134 @@ static void gelic_card_get_vlan_info(struct gelic_card *card)
 /*
  * ps3_gelic_driver_probe - add a device to the control of this driver
  */
-static int ps3_gelic_driver_probe(struct ps3_system_bus_device *dev)
+static int ps3_gelic_driver_probe(struct ps3_system_bus_device *sb_dev)
 {
-	struct gelic_card *card;
+	struct device *dev = &sb_dev->core;
 	struct net_device *netdev;
+	struct gelic_card *card;
 	int result;
 
-	pr_debug("%s: called\n", __func__);
+	dev_dbg(dev, "%s:%d: >\n", __func__, __LINE__);
 
 	udbg_shutdown_ps3gelic();
 
-	result = ps3_open_hv_device(dev);
+	result = ps3_open_hv_device(sb_dev);
 
 	if (result) {
-		dev_dbg(&dev->core, "%s:ps3_open_hv_device failed\n",
-			__func__);
+		dev_err(dev, "%s:%d: ps3_open_hv_device failed: %d\n",
+			__func__, __LINE__, result);
 		goto fail_open;
 	}
 
-	result = ps3_dma_region_create(dev->d_region);
+	result = ps3_dma_region_create(sb_dev->d_region);
 
 	if (result) {
-		dev_dbg(&dev->core, "%s:ps3_dma_region_create failed(%d)\n",
-			__func__, result);
+		dev_err(dev, "%s:%d: ps3_dma_region_create failed: %d\n",
+			__func__, __LINE__, result);
 		BUG_ON("check region type");
 		goto fail_dma_region;
 	}
 
-	/* alloc card/netdevice */
 	card = gelic_alloc_card_net(&netdev);
+
 	if (!card) {
-		dev_info(&dev->core, "%s:gelic_net_alloc_card failed\n",
-			 __func__);
+		dev_info(dev, "%s:%d: gelic_net_alloc_card failed.\n", __func__,
+			__LINE__);
 		result = -ENOMEM;
 		goto fail_alloc_card;
 	}
-	ps3_system_bus_set_drvdata(dev, card);
-	card->dev = dev;
 
-	/* get internal vlan info */
+	ps3_system_bus_set_drvdata(sb_dev, card);
+	card->dev = sb_dev;
 	gelic_card_get_vlan_info(card);
-
 	card->link_mode = GELIC_LV1_ETHER_AUTO_NEG;
 
-	/* setup interrupt */
 	result = lv1_net_set_interrupt_status_indicator(bus_id(card),
-							dev_id(card),
-		ps3_mm_phys_to_lpar(__pa(&card->irq_status)),
-		0);
+		dev_id(card), ps3_mm_phys_to_lpar(__pa(&card->irq_status)), 0);
 
 	if (result) {
-		dev_dbg(&dev->core,
-			"%s:set_interrupt_status_indicator failed: %s\n",
-			__func__, ps3_result(result));
+		dev_dbg(dev,
+			"%s:%d: set_interrupt_status_indicator failed: %s\n",
+			__func__, __LINE__, ps3_result(result));
 		result = -EIO;
 		goto fail_status_indicator;
 	}
 
-	result = ps3_sb_event_receive_port_setup(dev, PS3_BINDING_CPU_ANY,
+	result = ps3_sb_event_receive_port_setup(sb_dev, PS3_BINDING_CPU_ANY,
 		&card->irq);
 
 	if (result) {
-		dev_info(ctodev(card),
-			 "%s:gelic_net_open_device failed (%d)\n",
-			 __func__, result);
+		dev_dbg(dev, "%s:%d: gelic_net_open_device failed: %d\n",
+			 __func__, __LINE__, result);
 		result = -EPERM;
 		goto fail_alloc_irq;
 	}
+
 	result = request_irq(card->irq, gelic_card_interrupt,
 			     0, netdev->name, card);
 
 	if (result) {
-		dev_info(ctodev(card), "%s:request_irq failed (%d)\n",
-			__func__, result);
+		dev_dbg(dev, "%s:%d: request_irq failed: %d\n",
+			__func__, __LINE__, result);
 		goto fail_request_irq;
 	}
 
-	/* setup card structure */
 	card->irq_mask = GELIC_CARD_RXINT | GELIC_CARD_TXINT |
 		GELIC_CARD_PORT_STATUS_CHANGED;
 
+	result = gelic_card_init_chain(card, &card->tx_chain, card->descr,
+		GELIC_NET_TX_DESCRIPTORS);
 
-	result = gelic_card_init_chain(card, &card->tx_chain,
-				       card->descr, GELIC_NET_TX_DESCRIPTORS);
-	if (result)
+	if (result) {
 		goto fail_alloc_tx;
+	}
+
 	result = gelic_card_init_chain(card, &card->rx_chain,
-				       card->descr + GELIC_NET_TX_DESCRIPTORS,
-				       GELIC_NET_RX_DESCRIPTORS);
-	if (result)
+		card->descr + GELIC_NET_TX_DESCRIPTORS,
+		GELIC_NET_RX_DESCRIPTORS);
+
+	if (result) {
 		goto fail_alloc_rx;
+	}
 
-	/* head of chain */
 	card->tx_top = card->tx_chain.head;
 	card->rx_top = card->rx_chain.head;
-	dev_dbg(ctodev(card), "descr rx %p, tx %p, size %#lx, num %#x\n",
-		card->rx_top, card->tx_top, sizeof(struct gelic_descr),
-		GELIC_NET_RX_DESCRIPTORS);
-	/* allocate rx skbs */
+
+	dev_dbg(dev, "%s:%d: descr rx %px, tx %px, size %#lx, num %#x\n",
+		__func__, __LINE__, card->rx_top, card->tx_top,
+		sizeof(struct gelic_descr), GELIC_NET_RX_DESCRIPTORS);
+
 	result = gelic_card_alloc_rx_skbs(card);
-	if (result)
+
+	if (result) {
 		goto fail_alloc_skbs;
+	}
 
 	spin_lock_init(&card->tx_lock);
 	card->tx_dma_progress = 0;
 
-	/* setup net_device structure */
 	netdev->irq = card->irq;
-	SET_NETDEV_DEV(netdev, &card->dev->core);
+	SET_NETDEV_DEV(netdev, dev);
 	gelic_ether_setup_netdev_ops(netdev, &card->napi);
+
 	result = gelic_net_setup_netdev(netdev, card);
+
 	if (result) {
-		dev_dbg(&dev->core, "%s: setup_netdev failed %d\n",
-			__func__, result);
+		dev_err(dev, "%s:%d: setup_netdev failed: %d\n", __func__,
+			__LINE__, result);
 		goto fail_setup_netdev;
 	}
 
 #ifdef CONFIG_GELIC_WIRELESS
 	result = gelic_wl_driver_probe(card);
+
 	if (result) {
-		dev_dbg(&dev->core, "%s: WL init failed\n", __func__);
+		dev_dbg(dev, "%s:%d: WL init failed\n", __func__, __LINE__);
 		goto fail_setup_netdev;
 	}
 #endif
-	pr_debug("%s: done\n", __func__);
+
+	dev_dbg(dev, "%s:%d: < OK\n", __func__, __LINE__);
 	return 0;
 
 fail_setup_netdev:
@@ -1772,20 +1852,19 @@ static int ps3_gelic_driver_probe(struct ps3_system_bus_device *dev)
 	free_irq(card->irq, card);
 	netdev->irq = 0;
 fail_request_irq:
-	ps3_sb_event_receive_port_destroy(dev, card->irq);
+	ps3_sb_event_receive_port_destroy(sb_dev, card->irq);
 fail_alloc_irq:
-	lv1_net_set_interrupt_status_indicator(bus_id(card),
-					       bus_id(card),
-					       0, 0);
+	lv1_net_set_interrupt_status_indicator(bus_id(card), bus_id(card), 0, 0);
 fail_status_indicator:
-	ps3_system_bus_set_drvdata(dev, NULL);
+	ps3_system_bus_set_drvdata(sb_dev, NULL);
 	kfree(netdev_card(netdev)->unalign);
 	free_netdev(netdev);
 fail_alloc_card:
-	ps3_dma_region_free(dev->d_region);
+	ps3_dma_region_free(sb_dev->d_region);
 fail_dma_region:
-	ps3_close_hv_device(dev);
+	ps3_close_hv_device(sb_dev);
 fail_open:
+	dev_dbg(dev, "%s:%d: < error\n", __func__, __LINE__);
 	return result;
 }
 
diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.h b/drivers/net/ethernet/toshiba/ps3_gelic_net.h
index 68f324ed4eaf..fb0d314d53e5 100644
--- a/drivers/net/ethernet/toshiba/ps3_gelic_net.h
+++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.h
@@ -220,29 +220,35 @@ enum gelic_lv1_phy {
 	GELIC_LV1_PHY_ETHERNET_0	= 0x0000000000000002L,
 };
 
-/* size of hardware part of gelic descriptor */
-#define GELIC_DESCR_SIZE	(32)
-
 enum gelic_port_type {
 	GELIC_PORT_ETHERNET_0	= 0,
 	GELIC_PORT_WIRELESS	= 1,
 	GELIC_PORT_MAX
 };
 
-struct gelic_descr {
-	/* as defined by the hardware */
-	__be32 buf_addr;
-	__be32 buf_size;
+/* as defined by the hardware */
+struct gelic_hw_regs {
+	struct  {
+		__be32 dev_addr;
+		__be32 size;
+	} __attribute__ ((packed)) payload;
 	__be32 next_descr_addr;
 	__be32 dmac_cmd_status;
 	__be32 result_size;
 	__be32 valid_size;	/* all zeroes for tx */
 	__be32 data_status;
 	__be32 data_error;	/* all zeroes for tx */
+} __attribute__ ((packed));
 
-	/* used in the driver */
+struct gelic_chain_link {
+	dma_addr_t cpu_addr;
+	unsigned int size;
+};
+
+struct gelic_descr {
+	struct gelic_hw_regs hw_regs;
+	struct gelic_chain_link link;
 	struct sk_buff *skb;
-	dma_addr_t bus_addr;
 	struct gelic_descr *next;
 	struct gelic_descr *prev;
 } __attribute__((aligned(32)));
-- 
2.25.1

[PATCH 5/5] net/ps3_gelic: Cleanups, improve logging

[Geoff Levand]

General source cleanups and improved logging messages.

Signed-off-by: Geoff Levand <geoff@infradead.org>
---
 drivers/net/ethernet/toshiba/ps3_gelic_net.c | 395 ++++++++++---------
 1 file changed, 216 insertions(+), 179 deletions(-)

diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.c b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
index e01938128882..9dbcb7c4ec80 100644
--- a/drivers/net/ethernet/toshiba/ps3_gelic_net.c
+++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
@@ -44,17 +44,17 @@ MODULE_AUTHOR("SCE Inc.");
 MODULE_DESCRIPTION("Gelic Network driver");
 MODULE_LICENSE("GPL");
 
-
-/* set irq_mask */
 int gelic_card_set_irq_mask(struct gelic_card *card, u64 mask)
 {
+	struct device *dev = ctodev(card);
 	int status;
 
 	status = lv1_net_set_interrupt_mask(bus_id(card), dev_id(card),
 					    mask, 0);
-	if (status)
-		dev_info(ctodev(card),
-			 "%s failed %d\n", __func__, status);
+	if (status) {
+		dev_err(dev, "%s:%d failed: %d\n", __func__, __LINE__, status);
+	}
+
 	return status;
 }
 
@@ -63,6 +63,7 @@ static void gelic_card_rx_irq_on(struct gelic_card *card)
 	card->irq_mask |= GELIC_CARD_RXINT;
 	gelic_card_set_irq_mask(card, card->irq_mask);
 }
+
 static void gelic_card_rx_irq_off(struct gelic_card *card)
 {
 	card->irq_mask &= ~GELIC_CARD_RXINT;
@@ -70,15 +71,14 @@ static void gelic_card_rx_irq_off(struct gelic_card *card)
 }
 
 static void gelic_card_get_ether_port_status(struct gelic_card *card,
-					     int inform)
+	int inform)
 {
 	u64 v2;
 	struct net_device *ether_netdev;
 
 	lv1_net_control(bus_id(card), dev_id(card),
-			GELIC_LV1_GET_ETH_PORT_STATUS,
-			GELIC_LV1_VLAN_TX_ETHERNET_0, 0, 0,
-			&card->ether_port_status, &v2);
+		GELIC_LV1_GET_ETH_PORT_STATUS, GELIC_LV1_VLAN_TX_ETHERNET_0, 0,
+		0, &card->ether_port_status, &v2);
 
 	if (inform) {
 		ether_netdev = card->netdev[GELIC_PORT_ETHERNET_0];
@@ -105,15 +105,17 @@ gelic_descr_get_status(struct gelic_descr *descr)
 
 static int gelic_card_set_link_mode(struct gelic_card *card, int mode)
 {
+	struct device *dev = ctodev(card);
 	int status;
 	u64 v1, v2;
 
 	status = lv1_net_control(bus_id(card), dev_id(card),
-				 GELIC_LV1_SET_NEGOTIATION_MODE,
-				 GELIC_LV1_PHY_ETHERNET_0, mode, 0, &v1, &v2);
+		GELIC_LV1_SET_NEGOTIATION_MODE, GELIC_LV1_PHY_ETHERNET_0, mode,
+		0, &v1, &v2);
+
 	if (status) {
-		pr_info("%s: failed setting negotiation mode %d\n", __func__,
-			status);
+		dev_err(dev, "%s:%d: Failed setting negotiation mode: %d\n",
+			__func__, __LINE__, status);
 		return -EBUSY;
 	}
 
@@ -130,13 +132,16 @@ static int gelic_card_set_link_mode(struct gelic_card *card, int mode)
  */
 static void gelic_card_disable_txdmac(struct gelic_card *card)
 {
+	struct device *dev = ctodev(card);
 	int status;
 
 	/* this hvc blocks until the DMA in progress really stopped */
 	status = lv1_net_stop_tx_dma(bus_id(card), dev_id(card));
-	if (status)
-		dev_err(ctodev(card),
-			"lv1_net_stop_tx_dma failed, status=%d\n", status);
+
+	if (status) {
+		dev_err(dev, "%s:%d: lv1_net_stop_tx_dma failed: %d\n",
+			__func__, __LINE__, status);
+	}
 }
 
 /**
@@ -187,13 +192,16 @@ static void gelic_card_enable_rxdmac(struct gelic_card *card)
  */
 static void gelic_card_disable_rxdmac(struct gelic_card *card)
 {
+	struct device *dev = ctodev(card);
 	int status;
 
 	/* this hvc blocks until the DMA in progress really stopped */
 	status = lv1_net_stop_rx_dma(bus_id(card), dev_id(card));
-	if (status)
-		dev_err(ctodev(card),
-			"lv1_net_stop_rx_dma failed, %d\n", status);
+
+	if (status) {
+		dev_err(dev, "%s:%d: lv1_net_stop_rx_dma failed: %d\n",
+			__func__, __LINE__, status);
+	}
 }
 
 /**
@@ -216,6 +224,7 @@ static void gelic_descr_set_status(struct gelic_descr *descr,
 	 * Usually caller of this function wants to inform that to the
 	 * hardware, so we assure here the hardware sees the change.
 	 */
+
 	wmb();
 }
 
@@ -229,8 +238,7 @@ static void gelic_descr_set_status(struct gelic_descr *descr,
  * and re-initialize the hardware chain for later use
  */
 static void gelic_card_reset_chain(struct gelic_card *card,
-				   struct gelic_descr_chain *chain,
-				   struct gelic_descr *start_descr)
+	struct gelic_descr_chain *chain, struct gelic_descr *start_descr)
 {
 	struct gelic_descr *descr;
 
@@ -248,45 +256,41 @@ static void gelic_card_reset_chain(struct gelic_card *card,
 
 void gelic_card_up(struct gelic_card *card)
 {
-	pr_debug("%s: called\n", __func__);
+	struct device *dev = ctodev(card);
+
 	mutex_lock(&card->updown_lock);
 	if (atomic_inc_return(&card->users) == 1) {
-		pr_debug("%s: real do\n", __func__);
-		/* enable irq */
+		dev_dbg(dev, "%s:%d: Starting...\n", __func__, __LINE__);
 		gelic_card_set_irq_mask(card, card->irq_mask);
-		/* start rx */
 		gelic_card_enable_rxdmac(card);
-
 		napi_enable(&card->napi);
 	}
 	mutex_unlock(&card->updown_lock);
-	pr_debug("%s: done\n", __func__);
 }
 
 void gelic_card_down(struct gelic_card *card)
 {
+	struct device *dev = ctodev(card);
 	u64 mask;
-	pr_debug("%s: called\n", __func__);
+
 	mutex_lock(&card->updown_lock);
 	if (atomic_dec_if_positive(&card->users) == 0) {
-		pr_debug("%s: real do\n", __func__);
+		dev_dbg(dev, "%s:%d: Stopping...\n", __func__, __LINE__);
 		napi_disable(&card->napi);
 		/*
-		 * Disable irq. Wireless interrupts will
-		 * be disabled later if any
+		 * Disable irq. Wireless interrupts will be disabled later.
 		 */
 		mask = card->irq_mask & (GELIC_CARD_WLAN_EVENT_RECEIVED |
-					 GELIC_CARD_WLAN_COMMAND_COMPLETED);
+			GELIC_CARD_WLAN_COMMAND_COMPLETED);
 		gelic_card_set_irq_mask(card, mask);
-		/* stop rx */
+
 		gelic_card_disable_rxdmac(card);
 		gelic_card_reset_chain(card, &card->rx_chain,
-				       card->descr + GELIC_NET_TX_DESCRIPTORS);
-		/* stop tx */
+			card->descr + GELIC_NET_TX_DESCRIPTORS);
+
 		gelic_card_disable_txdmac(card);
 	}
 	mutex_unlock(&card->updown_lock);
-	pr_debug("%s: done\n", __func__);
 }
 
 static void gelic_unmap_link(struct device *dev, struct gelic_descr *descr)
@@ -652,6 +656,7 @@ static void gelic_card_release_tx_chain(struct gelic_card *card, int stop)
 void gelic_net_set_multi(struct net_device *netdev)
 {
 	struct gelic_card *card = netdev_card(netdev);
+	struct device *dev = ctodev(card);
 	struct netdev_hw_addr *ha;
 	unsigned int i;
 	uint8_t *p;
@@ -661,27 +666,31 @@ void gelic_net_set_multi(struct net_device *netdev)
 	/* clear all multicast address */
 	status = lv1_net_remove_multicast_address(bus_id(card), dev_id(card),
 						  0, 1);
-	if (status)
-		dev_err(ctodev(card),
-			"lv1_net_remove_multicast_address failed %d\n",
-			status);
+	if (status) {
+		dev_err(dev,
+			"%s:%d: lv1_net_remove_multicast_address failed %d\n",
+			__func__, __LINE__, status);
+	}
+
 	/* set broadcast address */
 	status = lv1_net_add_multicast_address(bus_id(card), dev_id(card),
 					       GELIC_NET_BROADCAST_ADDR, 0);
-	if (status)
-		dev_err(ctodev(card),
-			"lv1_net_add_multicast_address failed, %d\n",
-			status);
+	if (status) {
+		dev_err(dev,
+			"%s:%d: lv1_net_add_multicast_address failed, %d\n",
+			__func__, __LINE__, status);
+	}
 
 	if ((netdev->flags & IFF_ALLMULTI) ||
 	    (netdev_mc_count(netdev) > GELIC_NET_MC_COUNT_MAX)) {
 		status = lv1_net_add_multicast_address(bus_id(card),
 						       dev_id(card),
 						       0, 1);
-		if (status)
-			dev_err(ctodev(card),
-				"lv1_net_add_multicast_address failed, %d\n",
-				status);
+		if (status) {
+			dev_err(dev,
+				"%s:%d: lv1_net_add_multicast_address failed, %d\n",
+				__func__, __LINE__, status);
+		}
 		return;
 	}
 
@@ -694,12 +703,13 @@ void gelic_net_set_multi(struct net_device *netdev)
 			addr |= *p++;
 		}
 		status = lv1_net_add_multicast_address(bus_id(card),
-						       dev_id(card),
-						       addr, 0);
-		if (status)
-			dev_err(ctodev(card),
-				"lv1_net_add_multicast_address failed, %d\n",
-				status);
+			dev_id(card), addr, 0);
+
+		if (status) {
+			dev_err(dev,
+				"%s:%d: lv1_net_add_multicast_address failed, %d\n",
+				__func__, __LINE__, status);
+		}
 	}
 }
 
@@ -711,17 +721,17 @@ void gelic_net_set_multi(struct net_device *netdev)
  */
 int gelic_net_stop(struct net_device *netdev)
 {
-	struct gelic_card *card;
+	struct gelic_card *card = netdev_card(netdev);
+	struct device *dev = ctodev(card);
 
-	pr_debug("%s: start\n", __func__);
+	dev_dbg(dev, "%s:%d: >\n", __func__, __LINE__);
 
 	netif_stop_queue(netdev);
 	netif_carrier_off(netdev);
 
-	card = netdev_card(netdev);
 	gelic_card_down(card);
 
-	pr_debug("%s: done\n", __func__);
+	dev_dbg(dev, "%s:%d: <\n", __func__, __LINE__);
 	return 0;
 }
 
@@ -736,14 +746,15 @@ gelic_card_get_next_tx_descr(struct gelic_card *card)
 {
 	if (!card->tx_chain.head)
 		return NULL;
+
 	/*  see if the next descriptor is free */
-	if (card->tx_chain.tail != card->tx_chain.head->next &&
-	    gelic_descr_get_status(card->tx_chain.head) ==
-	    GELIC_DESCR_DMA_NOT_IN_USE)
+	if ((card->tx_chain.tail != card->tx_chain.head->next)
+		&& (gelic_descr_get_status(card->tx_chain.head)
+		== GELIC_DESCR_DMA_NOT_IN_USE)) {
 		return card->tx_chain.head;
-	else
-		return NULL;
+	}
 
+	return NULL;
 }
 
 /**
@@ -787,14 +798,15 @@ static void gelic_descr_set_tx_cmdstat(struct gelic_descr *descr,
 }
 
 static struct sk_buff *gelic_put_vlan_tag(struct sk_buff *skb,
-						 unsigned short tag)
+	unsigned short tag)
 {
 	struct vlan_ethhdr *veth;
 	static unsigned int c;
 
 	if (skb_headroom(skb) < VLAN_HLEN) {
 		struct sk_buff *sk_tmp = skb;
-		pr_debug("%s: hd=%d c=%ud\n", __func__, skb_headroom(skb), c);
+		pr_debug("%s:%d: hd=%d c=%ud\n", __func__, __LINE__,
+			skb_headroom(skb), c);
 		skb = skb_realloc_headroom(sk_tmp, VLAN_HLEN);
 		if (!skb)
 			return NULL;
@@ -818,7 +830,6 @@ static struct sk_buff *gelic_put_vlan_tag(struct sk_buff *skb,
  * @skb: packet to use
  *
  * returns 0 on success, <0 on failure.
- *
  */
 static int gelic_descr_prepare_tx(struct gelic_card *card,
 	struct gelic_descr *descr, struct sk_buff *skb)
@@ -1161,9 +1172,9 @@ static int gelic_net_poll(struct napi_struct *napi, int budget)
 	int packets_done = 0;
 
 	while (packets_done < budget) {
-		if (!gelic_card_decode_one_descr(card))
+		if (!gelic_card_decode_one_descr(card)) {
 			break;
-
+		}
 		packets_done++;
 	}
 
@@ -1171,6 +1182,7 @@ static int gelic_net_poll(struct napi_struct *napi, int budget)
 		napi_complete_done(napi, packets_done);
 		gelic_card_rx_irq_on(card);
 	}
+
 	return packets_done;
 }
 
@@ -1185,8 +1197,9 @@ static irqreturn_t gelic_card_interrupt(int irq, void *ptr)
 
 	status = card->irq_status;
 
-	if (!status)
+	if (!status) {
 		return IRQ_NONE;
+	}
 
 	status &= card->irq_mask;
 
@@ -1205,13 +1218,15 @@ static irqreturn_t gelic_card_interrupt(int irq, void *ptr)
 	}
 
 	/* ether port status changed */
-	if (status & GELIC_CARD_PORT_STATUS_CHANGED)
+	if (status & GELIC_CARD_PORT_STATUS_CHANGED) {
 		gelic_card_get_ether_port_status(card, 1);
+	}
 
 #ifdef CONFIG_GELIC_WIRELESS
 	if (status & (GELIC_CARD_WLAN_EVENT_RECEIVED |
-		      GELIC_CARD_WLAN_COMMAND_COMPLETED))
+		GELIC_CARD_WLAN_COMMAND_COMPLETED)) {
 		gelic_wl_interrupt(card->netdev[GELIC_PORT_WIRELESS], status);
+	}
 #endif
 
 	return IRQ_HANDLED;
@@ -1247,19 +1262,16 @@ int gelic_net_open(struct net_device *netdev)
 {
 	struct gelic_card *card = netdev_card(netdev);
 
-	dev_dbg(ctodev(card), " -> %s %p\n", __func__, netdev);
-
 	gelic_card_up(card);
 
 	netif_start_queue(netdev);
 	gelic_card_get_ether_port_status(card, 1);
 
-	dev_dbg(ctodev(card), " <- %s\n", __func__);
 	return 0;
 }
 
 void gelic_net_get_drvinfo(struct net_device *netdev,
-			   struct ethtool_drvinfo *info)
+	struct ethtool_drvinfo *info)
 {
 	strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
 	strlcpy(info->version, DRV_VERSION, sizeof(info->version));
@@ -1317,11 +1329,11 @@ static int gelic_ether_get_link_ksettings(struct net_device *netdev,
 	return 0;
 }
 
-static int
-gelic_ether_set_link_ksettings(struct net_device *netdev,
-			       const struct ethtool_link_ksettings *cmd)
+static int gelic_ether_set_link_ksettings(struct net_device *netdev,
+	const struct ethtool_link_ksettings *cmd)
 {
 	struct gelic_card *card = netdev_card(netdev);
+	struct device *dev = ctodev(card);
 	u64 mode;
 	int ret;
 
@@ -1341,94 +1353,100 @@ gelic_ether_set_link_ksettings(struct net_device *netdev,
 		default:
 			return -EINVAL;
 		}
+
 		if (cmd->base.duplex == DUPLEX_FULL) {
 			mode |= GELIC_LV1_ETHER_FULL_DUPLEX;
 		} else if (cmd->base.speed == SPEED_1000) {
-			pr_info("1000 half duplex is not supported.\n");
+			dev_dbg(dev,
+				"%s:%d: 1000 half duplex is not supported.\n",
+				__func__, __LINE__);
 			return -EINVAL;
 		}
 	}
 
 	ret = gelic_card_set_link_mode(card, mode);
 
-	if (ret)
+	if (ret) {
 		return ret;
+	}
 
 	return 0;
 }
 
 static void gelic_net_get_wol(struct net_device *netdev,
-			      struct ethtool_wolinfo *wol)
+	struct ethtool_wolinfo *wol)
 {
-	if (0 <= ps3_compare_firmware_version(2, 2, 0))
+	if (0 <= ps3_compare_firmware_version(2, 2, 0)) {
 		wol->supported = WAKE_MAGIC;
-	else
+	} else {
 		wol->supported = 0;
+	}
 
 	wol->wolopts = ps3_sys_manager_get_wol() ? wol->supported : 0;
 	memset(&wol->sopass, 0, sizeof(wol->sopass));
 }
+
 static int gelic_net_set_wol(struct net_device *netdev,
-			     struct ethtool_wolinfo *wol)
+	struct ethtool_wolinfo *wol)
 {
+	struct gelic_card *card = netdev_card(netdev);
+	struct device *dev = ctodev(card);
 	int status;
-	struct gelic_card *card;
 	u64 v1, v2;
 
 	if (ps3_compare_firmware_version(2, 2, 0) < 0 ||
-	    !capable(CAP_NET_ADMIN))
+		!capable(CAP_NET_ADMIN)) {
 		return -EPERM;
+	}
 
-	if (wol->wolopts & ~WAKE_MAGIC)
+	if (wol->wolopts & ~WAKE_MAGIC) {
 		return -EINVAL;
+	}
 
-	card = netdev_card(netdev);
 	if (wol->wolopts & WAKE_MAGIC) {
 		status = lv1_net_control(bus_id(card), dev_id(card),
-					 GELIC_LV1_SET_WOL,
-					 GELIC_LV1_WOL_MAGIC_PACKET,
-					 0, GELIC_LV1_WOL_MP_ENABLE,
-					 &v1, &v2);
+			GELIC_LV1_SET_WOL, GELIC_LV1_WOL_MAGIC_PACKET, 0,
+			GELIC_LV1_WOL_MP_ENABLE, &v1, &v2);
+
 		if (status) {
-			pr_info("%s: enabling WOL failed %d\n", __func__,
-				status);
+			dev_dbg(dev, "%s:%d: enabling WOL failed: %d\n",
+				__func__, __LINE__, status);
 			status = -EIO;
 			goto done;
 		}
+
 		status = lv1_net_control(bus_id(card), dev_id(card),
-					 GELIC_LV1_SET_WOL,
-					 GELIC_LV1_WOL_ADD_MATCH_ADDR,
-					 0, GELIC_LV1_WOL_MATCH_ALL,
-					 &v1, &v2);
-		if (!status)
+			GELIC_LV1_SET_WOL, GELIC_LV1_WOL_ADD_MATCH_ADDR, 0,
+			GELIC_LV1_WOL_MATCH_ALL, &v1, &v2);
+
+		if (!status) {
 			ps3_sys_manager_set_wol(1);
-		else {
-			pr_info("%s: enabling WOL filter failed %d\n",
-				__func__, status);
+		} else {
+			dev_dbg(dev, "%s:%d: Enabling WOL filter failed: %d\n",
+				__func__, __LINE__, status);
 			status = -EIO;
 		}
 	} else {
 		status = lv1_net_control(bus_id(card), dev_id(card),
-					 GELIC_LV1_SET_WOL,
-					 GELIC_LV1_WOL_MAGIC_PACKET,
-					 0, GELIC_LV1_WOL_MP_DISABLE,
-					 &v1, &v2);
+			GELIC_LV1_SET_WOL, GELIC_LV1_WOL_MAGIC_PACKET, 0,
+			GELIC_LV1_WOL_MP_DISABLE, &v1, &v2);
+
 		if (status) {
-			pr_info("%s: disabling WOL failed %d\n", __func__,
-				status);
+			dev_dbg(dev, "%s:%d: Disabling WOL failed: %d\n",
+				__func__, __LINE__, status);
 			status = -EIO;
 			goto done;
 		}
+
 		status = lv1_net_control(bus_id(card), dev_id(card),
-					 GELIC_LV1_SET_WOL,
-					 GELIC_LV1_WOL_DELETE_MATCH_ADDR,
-					 0, GELIC_LV1_WOL_MATCH_ALL,
-					 &v1, &v2);
+			GELIC_LV1_SET_WOL, GELIC_LV1_WOL_DELETE_MATCH_ADDR, 0,
+			GELIC_LV1_WOL_MATCH_ALL, &v1, &v2);
+
 		if (!status)
 			ps3_sys_manager_set_wol(0);
 		else {
-			pr_info("%s: removing WOL filter failed %d\n",
-				__func__, status);
+			dev_dbg(dev, "%s:%d: Removing WOL filter failed: %d\n",
+				__func__, __LINE__, status);
 			status = -EIO;
 		}
 	}
@@ -1445,6 +1463,11 @@ static const struct ethtool_ops gelic_ether_ethtool_ops = {
 	.set_link_ksettings = gelic_ether_set_link_ksettings,
 };
 
+static struct gelic_card *gelic_work_to_card(struct work_struct *work)
+{
+	return container_of(work, struct gelic_card, tx_timeout_task);
+}
+
 /**
  * gelic_net_tx_timeout_task - task scheduled by the watchdog timeout
  * function (to be called not under interrupt status)
@@ -1454,14 +1477,15 @@ static const struct ethtool_ops gelic_ether_ethtool_ops = {
  */
 static void gelic_net_tx_timeout_task(struct work_struct *work)
 {
-	struct gelic_card *card =
-		container_of(work, struct gelic_card, tx_timeout_task);
+	struct gelic_card *card = gelic_work_to_card(work);
 	struct net_device *netdev = card->netdev[GELIC_PORT_ETHERNET_0];
+	struct device *dev = ctodev(card);
 
-	dev_info(ctodev(card), "%s:Timed out. Restarting...\n", __func__);
+	dev_info(dev, "%s:%d: Timed out. Restarting...\n", __func__, __LINE__);
 
-	if (!(netdev->flags & IFF_UP))
+	if (!(netdev->flags & IFF_UP)) {
 		goto out;
+	}
 
 	netif_device_detach(netdev);
 	gelic_net_stop(netdev);
@@ -1486,10 +1510,12 @@ void gelic_net_tx_timeout(struct net_device *netdev, unsigned int txqueue)
 
 	card = netdev_card(netdev);
 	atomic_inc(&card->tx_timeout_task_counter);
-	if (netdev->flags & IFF_UP)
+
+	if (netdev->flags & IFF_UP) {
 		schedule_work(&card->tx_timeout_task);
-	else
+	} else {
 		atomic_dec(&card->tx_timeout_task_counter);
+	}
 }
 
 static const struct net_device_ops gelic_netdevice_ops = {
@@ -1513,7 +1539,7 @@ static const struct net_device_ops gelic_netdevice_ops = {
  * fills out function pointers in the net_device structure
  */
 static void gelic_ether_setup_netdev_ops(struct net_device *netdev,
-					 struct napi_struct *napi)
+	struct napi_struct *napi)
 {
 	netdev->watchdog_timeo = GELIC_NET_WATCHDOG_TIMEOUT;
 	/* NAPI */
@@ -1534,25 +1560,28 @@ static void gelic_ether_setup_netdev_ops(struct net_device *netdev,
  **/
 int gelic_net_setup_netdev(struct net_device *netdev, struct gelic_card *card)
 {
+	struct device *dev = ctodev(card);
 	int status;
 	u64 v1, v2;
 
 	netdev->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
-
 	netdev->features = NETIF_F_IP_CSUM;
-	if (GELIC_CARD_RX_CSUM_DEFAULT)
+
+	if (GELIC_CARD_RX_CSUM_DEFAULT) {
 		netdev->features |= NETIF_F_RXCSUM;
+	}
 
 	status = lv1_net_control(bus_id(card), dev_id(card),
-				 GELIC_LV1_GET_MAC_ADDRESS,
-				 0, 0, 0, &v1, &v2);
+		GELIC_LV1_GET_MAC_ADDRESS, 0, 0, 0, &v1, &v2);
+
 	v1 <<= 16;
+
 	if (status || !is_valid_ether_addr((u8 *)&v1)) {
-		dev_info(ctodev(card),
-			 "%s:lv1_net_control GET_MAC_ADDR failed %d\n",
-			 __func__, status);
+		dev_dbg(dev, "%s:%d: lv1_net_control GET_MAC_ADDR failed: %d\n",
+				__func__, __LINE__, status);
 		return -EINVAL;
 	}
+
 	memcpy(netdev->dev_addr, &v1, ETH_ALEN);
 
 	if (card->vlan_required) {
@@ -1569,13 +1598,15 @@ int gelic_net_setup_netdev(struct net_device *netdev, struct gelic_card *card)
 	netdev->max_mtu = GELIC_NET_MAX_MTU;
 
 	status = register_netdev(netdev);
+
 	if (status) {
-		dev_err(ctodev(card), "%s:Couldn't register %s %d\n",
-			__func__, netdev->name, status);
+		dev_err(dev, "%s:%d: Couldn't register %s: %d\n", __func__,
+			__LINE__, netdev->name, status);
 		return status;
 	}
-	dev_info(ctodev(card), "%s: MAC addr %pM\n",
-		 netdev->name, netdev->dev_addr);
+
+	dev_info(dev, "%s:%d: %s MAC addr %pxM\n", __func__, __LINE__,
+		netdev->name, netdev->dev_addr);
 
 	return 0;
 }
@@ -1600,34 +1631,33 @@ static struct gelic_card *gelic_alloc_card_net(struct net_device **netdev)
 	 */
 	BUILD_BUG_ON(offsetof(struct gelic_card, irq_status) % 8);
 	BUILD_BUG_ON(offsetof(struct gelic_card, descr) % 32);
-	alloc_size =
-		sizeof(struct gelic_card) +
+
+	alloc_size = sizeof(struct gelic_card) +
 		sizeof(struct gelic_descr) * GELIC_NET_RX_DESCRIPTORS +
 		sizeof(struct gelic_descr) * GELIC_NET_TX_DESCRIPTORS +
 		GELIC_ALIGN - 1;
 
 	p  = kzalloc(alloc_size, GFP_KERNEL);
-	if (!p)
+
+	if (!p) {
 		return NULL;
+	}
+
 	card = PTR_ALIGN(p, GELIC_ALIGN);
 	card->unalign = p;
 
-	/*
-	 * alloc netdev
-	 */
 	*netdev = alloc_etherdev(sizeof(struct gelic_port));
+
 	if (!*netdev) {
 		kfree(card->unalign);
 		return NULL;
 	}
-	port = netdev_priv(*netdev);
 
-	/* gelic_port */
+	port = netdev_priv(*netdev);
 	port->netdev = *netdev;
 	port->card = card;
 	port->type = GELIC_PORT_ETHERNET_0;
 
-	/* gelic_card */
 	card->netdev[GELIC_PORT_ETHERNET_0] = *netdev;
 
 	INIT_WORK(&card->tx_timeout_task, gelic_net_tx_timeout_task);
@@ -1641,13 +1671,15 @@ static struct gelic_card *gelic_alloc_card_net(struct net_device **netdev)
 
 static void gelic_card_get_vlan_info(struct gelic_card *card)
 {
+	struct device *dev = ctodev(card);
+	unsigned int i;
 	u64 v1, v2;
 	int status;
-	unsigned int i;
-	struct {
+	struct vlan_id {
 		int tx;
 		int rx;
-	} vlan_id_ix[2] = {
+	};
+	struct vlan_id vlan_id_ix[2] = {
 		[GELIC_PORT_ETHERNET_0] = {
 			.tx = GELIC_LV1_VLAN_TX_ETHERNET_0,
 			.rx = GELIC_LV1_VLAN_RX_ETHERNET_0
@@ -1661,38 +1693,44 @@ static void gelic_card_get_vlan_info(struct gelic_card *card)
 	for (i = 0; i < ARRAY_SIZE(vlan_id_ix); i++) {
 		/* tx tag */
 		status = lv1_net_control(bus_id(card), dev_id(card),
-					 GELIC_LV1_GET_VLAN_ID,
-					 vlan_id_ix[i].tx,
-					 0, 0, &v1, &v2);
+			GELIC_LV1_GET_VLAN_ID,	vlan_id_ix[i].tx, 0, 0, &v1,
+			&v2);
+
 		if (status || !v1) {
-			if (status != LV1_NO_ENTRY)
-				dev_dbg(ctodev(card),
-					"get vlan id for tx(%d) failed(%d)\n",
-					vlan_id_ix[i].tx, status);
+			if (status != LV1_NO_ENTRY) {
+				dev_dbg(dev,
+					"%s:%d: Get vlan id for tx(%d) failed: %d\n",
+					__func__, __LINE__, vlan_id_ix[i].tx,
+					status);
+			}
 			card->vlan[i].tx = 0;
 			card->vlan[i].rx = 0;
 			continue;
 		}
+
 		card->vlan[i].tx = (u16)v1;
 
 		/* rx tag */
 		status = lv1_net_control(bus_id(card), dev_id(card),
-					 GELIC_LV1_GET_VLAN_ID,
-					 vlan_id_ix[i].rx,
-					 0, 0, &v1, &v2);
+			GELIC_LV1_GET_VLAN_ID, vlan_id_ix[i].rx, 0, 0, &v1,
+			&v2);
+
 		if (status || !v1) {
-			if (status != LV1_NO_ENTRY)
-				dev_info(ctodev(card),
-					 "get vlan id for rx(%d) failed(%d)\n",
-					 vlan_id_ix[i].rx, status);
+			if (status != LV1_NO_ENTRY) {
+				dev_dbg(dev,
+					"%s:%d: Get vlan id for rx(%d) failed: %d\n",
+					__func__, __LINE__, vlan_id_ix[i].rx,
+					status);
+			}
 			card->vlan[i].tx = 0;
 			card->vlan[i].rx = 0;
 			continue;
 		}
+
 		card->vlan[i].rx = (u16)v1;
 
-		dev_dbg(ctodev(card), "vlan_id[%d] tx=%02x rx=%02x\n",
-			i, card->vlan[i].tx, card->vlan[i].rx);
+		dev_dbg(dev, "%s:%d: vlan_id[%d] tx=%02x rx=%02x\n", __func__,
+			__LINE__, i, card->vlan[i].tx, card->vlan[i].rx);
 	}
 
 	if (card->vlan[GELIC_PORT_ETHERNET_0].tx) {
@@ -1707,9 +1745,10 @@ static void gelic_card_get_vlan_info(struct gelic_card *card)
 		card->vlan[GELIC_PORT_WIRELESS].rx = 0;
 	}
 
-	dev_info(ctodev(card), "internal vlan %s\n",
-		 card->vlan_required? "enabled" : "disabled");
+	dev_dbg(dev, "%s:%d: internal vlan %s\n", __func__, __LINE__,
+		card->vlan_required? "enabled" : "disabled");
 }
+
 /*
  * ps3_gelic_driver_probe - add a device to the control of this driver
  */
@@ -1872,26 +1911,25 @@ static int ps3_gelic_driver_probe(struct ps3_system_bus_device *sb_dev)
  * ps3_gelic_driver_remove - remove a device from the control of this driver
  */
 
-static void ps3_gelic_driver_remove(struct ps3_system_bus_device *dev)
+static void ps3_gelic_driver_remove(struct ps3_system_bus_device *sb_dev)
 {
-	struct gelic_card *card = ps3_system_bus_get_drvdata(dev);
+	struct gelic_card *card = ps3_system_bus_get_drvdata(sb_dev);
+	struct device *dev = &sb_dev->core;
 	struct net_device *netdev0;
-	pr_debug("%s: called\n", __func__);
 
-	/* set auto-negotiation */
+	dev_dbg(dev, "%s:%d: >\n", __func__, __LINE__);
+
 	gelic_card_set_link_mode(card, GELIC_LV1_ETHER_AUTO_NEG);
 
 #ifdef CONFIG_GELIC_WIRELESS
 	gelic_wl_driver_remove(card);
 #endif
-	/* stop interrupt */
+
 	gelic_card_set_irq_mask(card, 0);
 
-	/* turn off DMA, force end */
 	gelic_card_disable_rxdmac(card);
 	gelic_card_disable_txdmac(card);
 
-	/* release chains */
 	gelic_card_release_tx_chain(card, 1);
 	gelic_card_release_rx_chain(card);
 
@@ -1899,28 +1937,28 @@ static void ps3_gelic_driver_remove(struct ps3_system_bus_device *dev)
 	gelic_card_free_chain(card, card->rx_top);
 
 	netdev0 = card->netdev[GELIC_PORT_ETHERNET_0];
-	/* disconnect event port */
+
 	free_irq(card->irq, card);
 	netdev0->irq = 0;
 	ps3_sb_event_receive_port_destroy(card->dev, card->irq);
 
 	wait_event(card->waitq,
-		   atomic_read(&card->tx_timeout_task_counter) == 0);
+		atomic_read(&card->tx_timeout_task_counter) == 0);
 
 	lv1_net_set_interrupt_status_indicator(bus_id(card), dev_id(card),
-					       0 , 0);
+		0 , 0);
 
 	unregister_netdev(netdev0);
 	kfree(netdev_card(netdev0)->unalign);
 	free_netdev(netdev0);
 
-	ps3_system_bus_set_drvdata(dev, NULL);
+	ps3_system_bus_set_drvdata(sb_dev, NULL);
 
-	ps3_dma_region_free(dev->d_region);
+	ps3_dma_region_free(sb_dev->d_region);
 
-	ps3_close_hv_device(dev);
+	ps3_close_hv_device(sb_dev);
 
-	pr_debug("%s: done\n", __func__);
+	dev_dbg(dev, "%s:%d: <\n", __func__, __LINE__);
 }
 
 static struct ps3_system_bus_driver ps3_gelic_driver = {
@@ -1932,14 +1970,14 @@ static struct ps3_system_bus_driver ps3_gelic_driver = {
 	.core.owner = THIS_MODULE,
 };
 
-static int __init ps3_gelic_driver_init (void)
+static int __init ps3_gelic_driver_init(void)
 {
 	return firmware_has_feature(FW_FEATURE_PS3_LV1)
 		? ps3_system_bus_driver_register(&ps3_gelic_driver)
 		: -ENODEV;
 }
 
-static void __exit ps3_gelic_driver_exit (void)
+static void __exit ps3_gelic_driver_exit(void)
 {
 	ps3_system_bus_driver_unregister(&ps3_gelic_driver);
 }
@@ -1948,4 +1986,3 @@ module_init(ps3_gelic_driver_init);
 module_exit(ps3_gelic_driver_exit);
 
 MODULE_ALIAS(PS3_MODULE_ALIAS_GELIC);
-
-- 
2.25.1

Re: [PATCH 0/5] DMA fixes for PS3 device drivers

[Michael Ellerman]

Geoff Levand <geoff@infradead.org> writes:
> Hi,
>
> This is a set of patches that fix various DMA related problems in the PS3
> device drivers, and add better error checking and improved message logging.
>
> The gelic network driver had a number of problems and most of the changes are
> in it's sources.
>
> Please consider.

Who are you thinking would merge this?

It's sort of splattered all over the place, but is mostly networking by
lines changed.

Maybe patches 3-5 should go via networking and I take 1-2?

cheers


> The following changes since commit 8124c8a6b35386f73523d27eacb71b5364a68c4c:
>
>   Linux 5.13-rc4 (2021-05-30 11:58:25 -1000)
>
> are available in the Git repository at:
>
>   git://git.kernel.org/pub/scm/linux/kernel/git/geoff/ps3-linux.git for-merge-gelic
>
> for you to fetch changes up to 4adcfc9735bf8d1987d2bc82e914be154f2ffad8:
>
>   net/ps3_gelic: Cleanups, improve logging (2021-06-01 12:27:43 -0700)
>
> ----------------------------------------------------------------
> Geoff Levand (5):
>       powerpc/ps3: Add CONFIG_PS3_VERBOSE_RESULT option
>       powerpc/ps3: Warn on PS3 device errors
>       powerpc/ps3: Add dma_mask to ps3_dma_region
>       net/ps3_gelic: Add gelic_descr structures
>       net/ps3_gelic: Cleanups, improve logging
>
>  arch/powerpc/include/asm/ps3.h               |   4 +-
>  arch/powerpc/platforms/ps3/Kconfig           |   9 +
>  arch/powerpc/platforms/ps3/mm.c              |  12 +
>  arch/powerpc/platforms/ps3/system-bus.c      |   9 +-
>  drivers/net/ethernet/toshiba/ps3_gelic_net.c | 968 +++++++++++++++------------
>  drivers/net/ethernet/toshiba/ps3_gelic_net.h |  24 +-
>  drivers/ps3/ps3-vuart.c                      |   2 +-
>  drivers/ps3/ps3av.c                          |  22 +-
>  8 files changed, 598 insertions(+), 452 deletions(-)
>
> -- 
> 2.25.1

Re: [PATCH 0/5] DMA fixes for PS3 device drivers

[Michael Ellerman]

Geoff Levand <geoff@infradead.org> writes:
> Hi,
>
> This is a set of patches that fix various DMA related problems in the PS3
> device drivers, and add better error checking and improved message logging.
>
> The gelic network driver had a number of problems and most of the changes are
> in it's sources.
>
> Please consider.

Who are you thinking would merge this?

It's sort of splattered all over the place, but is mostly networking by
lines changed.

Maybe patches 3-5 should go via networking and I take 1-2?

cheers


> The following changes since commit 8124c8a6b35386f73523d27eacb71b5364a68c4c:
>
>   Linux 5.13-rc4 (2021-05-30 11:58:25 -1000)
>
> are available in the Git repository at:
>
>   git://git.kernel.org/pub/scm/linux/kernel/git/geoff/ps3-linux.git for-merge-gelic
>
> for you to fetch changes up to 4adcfc9735bf8d1987d2bc82e914be154f2ffad8:
>
>   net/ps3_gelic: Cleanups, improve logging (2021-06-01 12:27:43 -0700)
>
> ----------------------------------------------------------------
> Geoff Levand (5):
>       powerpc/ps3: Add CONFIG_PS3_VERBOSE_RESULT option
>       powerpc/ps3: Warn on PS3 device errors
>       powerpc/ps3: Add dma_mask to ps3_dma_region
>       net/ps3_gelic: Add gelic_descr structures
>       net/ps3_gelic: Cleanups, improve logging
>
>  arch/powerpc/include/asm/ps3.h               |   4 +-
>  arch/powerpc/platforms/ps3/Kconfig           |   9 +
>  arch/powerpc/platforms/ps3/mm.c              |  12 +
>  arch/powerpc/platforms/ps3/system-bus.c      |   9 +-
>  drivers/net/ethernet/toshiba/ps3_gelic_net.c | 968 +++++++++++++++------------
>  drivers/net/ethernet/toshiba/ps3_gelic_net.h |  24 +-
>  drivers/ps3/ps3-vuart.c                      |   2 +-
>  drivers/ps3/ps3av.c                          |  22 +-
>  8 files changed, 598 insertions(+), 452 deletions(-)
>
> -- 
> 2.25.1

Re: [PATCH 0/5] DMA fixes for PS3 device drivers

[Geoff Levand]

Hi Michael,

On 6/2/21 10:38 PM, Michael Ellerman wrote:
> Geoff Levand <geoff@infradead.org> writes:
>> Hi,
>>
>> This is a set of patches that fix various DMA related problems in the PS3
>> device drivers, and add better error checking and improved message logging.
>>
>> The gelic network driver had a number of problems and most of the changes are
>> in it's sources.
>>
>> Please consider.
> 
> Who are you thinking would merge this?
> 
> It's sort of splattered all over the place, but is mostly networking by
> lines changed.
> 
> Maybe patches 3-5 should go via networking and I take 1-2?

As suggested, I split the V1 series into two separate series, one for
powerpc, and one for network.  

I thought it made more sense for patch 3, 'powerpc/ps3: Add dma_mask
to ps3_dma_region' to go with the powerpc series, so put it into that
series.

>> Geoff Levand (5):
>>       powerpc/ps3: Add CONFIG_PS3_VERBOSE_RESULT option
>>       powerpc/ps3: Warn on PS3 device errors
>>       powerpc/ps3: Add dma_mask to ps3_dma_region
>>       net/ps3_gelic: Add gelic_descr structures
>>       net/ps3_gelic: Cleanups, improve logging
>>
>>  arch/powerpc/include/asm/ps3.h               |   4 +-
>>  arch/powerpc/platforms/ps3/Kconfig           |   9 +
>>  arch/powerpc/platforms/ps3/mm.c              |  12 +
>>  arch/powerpc/platforms/ps3/system-bus.c      |   9 +-
>>  drivers/net/ethernet/toshiba/ps3_gelic_net.c | 968 +++++++++++++++------------
>>  drivers/net/ethernet/toshiba/ps3_gelic_net.h |  24 +-
>>  drivers/ps3/ps3-vuart.c                      |   2 +-
>>  drivers/ps3/ps3av.c                          |  22 +-
>>  8 files changed, 598 insertions(+), 452 deletions(-)

-Geoff

Re: [PATCH 0/5] DMA fixes for PS3 device drivers

[Geoff Levand]

Hi Michael,

On 6/2/21 10:38 PM, Michael Ellerman wrote:
> Geoff Levand <geoff@infradead.org> writes:
>> Hi,
>>
>> This is a set of patches that fix various DMA related problems in the PS3
>> device drivers, and add better error checking and improved message logging.
>>
>> The gelic network driver had a number of problems and most of the changes are
>> in it's sources.
>>
>> Please consider.
> 
> Who are you thinking would merge this?
> 
> It's sort of splattered all over the place, but is mostly networking by
> lines changed.
> 
> Maybe patches 3-5 should go via networking and I take 1-2?

As suggested, I split the V1 series into two separate series, one for
powerpc, and one for network.  

I thought it made more sense for patch 3, 'powerpc/ps3: Add dma_mask
to ps3_dma_region' to go with the powerpc series, so put it into that
series.

>> Geoff Levand (5):
>>       powerpc/ps3: Add CONFIG_PS3_VERBOSE_RESULT option
>>       powerpc/ps3: Warn on PS3 device errors
>>       powerpc/ps3: Add dma_mask to ps3_dma_region
>>       net/ps3_gelic: Add gelic_descr structures
>>       net/ps3_gelic: Cleanups, improve logging
>>
>>  arch/powerpc/include/asm/ps3.h               |   4 +-
>>  arch/powerpc/platforms/ps3/Kconfig           |   9 +
>>  arch/powerpc/platforms/ps3/mm.c              |  12 +
>>  arch/powerpc/platforms/ps3/system-bus.c      |   9 +-
>>  drivers/net/ethernet/toshiba/ps3_gelic_net.c | 968 +++++++++++++++------------
>>  drivers/net/ethernet/toshiba/ps3_gelic_net.h |  24 +-
>>  drivers/ps3/ps3-vuart.c                      |   2 +-
>>  drivers/ps3/ps3av.c                          |  22 +-
>>  8 files changed, 598 insertions(+), 452 deletions(-)

-Geoff

Re: [PATCH 0/5] DMA fixes for PS3 device drivers

[Michael Ellerman]

Geoff Levand <geoff@infradead.org> writes:
> Hi Michael,
>
> On 6/2/21 10:38 PM, Michael Ellerman wrote:
>> Geoff Levand <geoff@infradead.org> writes:
>>> Hi,
>>>
>>> This is a set of patches that fix various DMA related problems in the PS3
>>> device drivers, and add better error checking and improved message logging.
>>>
>>> The gelic network driver had a number of problems and most of the changes are
>>> in it's sources.
>>>
>>> Please consider.
>> 
>> Who are you thinking would merge this?
>> 
>> It's sort of splattered all over the place, but is mostly networking by
>> lines changed.
>> 
>> Maybe patches 3-5 should go via networking and I take 1-2?
>
> As suggested, I split the V1 series into two separate series, one for
> powerpc, and one for network.  

Thanks.

> I thought it made more sense for patch 3, 'powerpc/ps3: Add dma_mask
> to ps3_dma_region' to go with the powerpc series, so put it into that
> series.

Oh I thought patches 4 and 5 had a dependency on it, but if not yeah
makes sense for patch 3 to go via the powerpc tree.

cheers

Re: [PATCH 0/5] DMA fixes for PS3 device drivers

[Michael Ellerman]

Geoff Levand <geoff@infradead.org> writes:
> Hi Michael,
>
> On 6/2/21 10:38 PM, Michael Ellerman wrote:
>> Geoff Levand <geoff@infradead.org> writes:
>>> Hi,
>>>
>>> This is a set of patches that fix various DMA related problems in the PS3
>>> device drivers, and add better error checking and improved message logging.
>>>
>>> The gelic network driver had a number of problems and most of the changes are
>>> in it's sources.
>>>
>>> Please consider.
>> 
>> Who are you thinking would merge this?
>> 
>> It's sort of splattered all over the place, but is mostly networking by
>> lines changed.
>> 
>> Maybe patches 3-5 should go via networking and I take 1-2?
>
> As suggested, I split the V1 series into two separate series, one for
> powerpc, and one for network.  

Thanks.

> I thought it made more sense for patch 3, 'powerpc/ps3: Add dma_mask
> to ps3_dma_region' to go with the powerpc series, so put it into that
> series.

Oh I thought patches 4 and 5 had a dependency on it, but if not yeah
makes sense for patch 3 to go via the powerpc tree.

cheers