[PATCH 1/8 v2] thermal: rcar: move rcar_thermal_dt_ids to upside

[PATCH 1/8 v2] thermal: rcar: move rcar_thermal_dt_ids to upside

[Kuninori Morimoto]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch is prepare for of-thermal support.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
v1 -> v2

 - no change

 drivers/thermal/rcar_thermal.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 13d01ed..96707a6 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -81,6 +81,12 @@ struct rcar_thermal_priv {
 # define rcar_force_update_temp(priv)	0
 #endif
 
+static const struct of_device_id rcar_thermal_dt_ids[] = {
+	{ .compatible = "renesas,rcar-thermal", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, rcar_thermal_dt_ids);
+
 /*
  *		basic functions
  */
@@ -484,12 +490,6 @@ error_unregister:
 	return ret;
 }
 
-static const struct of_device_id rcar_thermal_dt_ids[] = {
-	{ .compatible = "renesas,rcar-thermal", },
-	{},
-};
-MODULE_DEVICE_TABLE(of, rcar_thermal_dt_ids);
-
 static struct platform_driver rcar_thermal_driver = {
 	.driver	= {
 		.name	= "rcar_thermal",
-- 
1.9.1

[PATCH 1/8 v2] thermal: rcar: move rcar_thermal_dt_ids to upside

[Kuninori Morimoto]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch is prepare for of-thermal support.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
v1 -> v2

 - no change

 drivers/thermal/rcar_thermal.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 13d01ed..96707a6 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -81,6 +81,12 @@ struct rcar_thermal_priv {
 # define rcar_force_update_temp(priv)	0
 #endif
 
+static const struct of_device_id rcar_thermal_dt_ids[] = {
+	{ .compatible = "renesas,rcar-thermal", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, rcar_thermal_dt_ids);
+
 /*
  *		basic functions
  */
@@ -484,12 +490,6 @@ error_unregister:
 	return ret;
 }
 
-static const struct of_device_id rcar_thermal_dt_ids[] = {
-	{ .compatible = "renesas,rcar-thermal", },
-	{},
-};
-MODULE_DEVICE_TABLE(of, rcar_thermal_dt_ids);
-
 static struct platform_driver rcar_thermal_driver = {
 	.driver	= {
 		.name	= "rcar_thermal",
-- 
1.9.1

[PATCH 1/8 v2] thermal: rcar: move rcar_thermal_dt_ids to upside

[Kuninori Morimoto]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch is prepare for of-thermal support.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
v1 -> v2

 - no change

 drivers/thermal/rcar_thermal.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 13d01ed..96707a6 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -81,6 +81,12 @@ struct rcar_thermal_priv {
 # define rcar_force_update_temp(priv)	0
 #endif
 
+static const struct of_device_id rcar_thermal_dt_ids[] = {
+	{ .compatible = "renesas,rcar-thermal", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, rcar_thermal_dt_ids);
+
 /*
  *		basic functions
  */
@@ -484,12 +490,6 @@ error_unregister:
 	return ret;
 }
 
-static const struct of_device_id rcar_thermal_dt_ids[] = {
-	{ .compatible = "renesas,rcar-thermal", },
-	{},
-};
-MODULE_DEVICE_TABLE(of, rcar_thermal_dt_ids);
-
 static struct platform_driver rcar_thermal_driver = {
 	.driver	= {
 		.name	= "rcar_thermal",
-- 
1.9.1

[PATCH 0/8 v2] enable to use thermal-zone on r8a7790/1

[Kuninori Morimoto]

Hi

These are v2 of thermal-zone support for r8a7790/r8a7791.
Mainly, it cares return value of get_temp()

I think 8) is needed on of-thermal (?)

Kuninori Morimoto (8):
      1) thermal: rcar: move rcar_thermal_dt_ids to upside
      2) thermal: rcar: check every rcar_thermal_update_temp() return value
      3) thermal: rcar: check irq possibility in rcar_thermal_irq_xxx()
      4) thermal: rcar: retern error rcar_thermal_get_temp() if no ctemp update
      5) thermal: rcar: enable to use thermal-zone on DT
      6) ARM: shmobile: r8a7790: enable to use thermal-zone
      7) ARM: shmobile: r8a7791: enable to use thermal-zone
      8) thermal: of-thermal: of_thermal_set_trip_temp() call thermal_zone_device_update()

 Documentation/devicetree/bindings/thermal/rcar-thermal.txt | 37 +++++++++++++++++++++++++++++++++++--
 arch/arm/boot/dts/r8a7790.dtsi                             | 26 ++++++++++++++++++++++++--
 arch/arm/boot/dts/r8a7791.dtsi                             | 26 ++++++++++++++++++++++++--
 drivers/thermal/of-thermal.c                               |  2 ++
 drivers/thermal/rcar_thermal.c                             | 96 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---------------------
 5 files changed, 160 insertions(+), 27 deletions(-)

Best regards
---
Kuninori Morimoto
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 0/8 v2] enable to use thermal-zone on r8a7790/1

[Kuninori Morimoto]

Hi

These are v2 of thermal-zone support for r8a7790/r8a7791.
Mainly, it cares return value of get_temp()

I think 8) is needed on of-thermal (?)

Kuninori Morimoto (8):
      1) thermal: rcar: move rcar_thermal_dt_ids to upside
      2) thermal: rcar: check every rcar_thermal_update_temp() return value
      3) thermal: rcar: check irq possibility in rcar_thermal_irq_xxx()
      4) thermal: rcar: retern error rcar_thermal_get_temp() if no ctemp update
      5) thermal: rcar: enable to use thermal-zone on DT
      6) ARM: shmobile: r8a7790: enable to use thermal-zone
      7) ARM: shmobile: r8a7791: enable to use thermal-zone
      8) thermal: of-thermal: of_thermal_set_trip_temp() call thermal_zone_device_update()

 Documentation/devicetree/bindings/thermal/rcar-thermal.txt | 37 +++++++++++++++++++++++++++++++++++--
 arch/arm/boot/dts/r8a7790.dtsi                             | 26 ++++++++++++++++++++++++--
 arch/arm/boot/dts/r8a7791.dtsi                             | 26 ++++++++++++++++++++++++--
 drivers/thermal/of-thermal.c                               |  2 ++
 drivers/thermal/rcar_thermal.c                             | 96 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---------------------
 5 files changed, 160 insertions(+), 27 deletions(-)

Best regards
---
Kuninori Morimoto
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 0/8 v2] enable to use thermal-zone on r8a7790/1

[Kuninori Morimoto]

Hi

These are v2 of thermal-zone support for r8a7790/r8a7791.
Mainly, it cares return value of get_temp()

I think 8) is needed on of-thermal (?)

Kuninori Morimoto (8):
      1) thermal: rcar: move rcar_thermal_dt_ids to upside
      2) thermal: rcar: check every rcar_thermal_update_temp() return value
      3) thermal: rcar: check irq possibility in rcar_thermal_irq_xxx()
      4) thermal: rcar: retern error rcar_thermal_get_temp() if no ctemp update
      5) thermal: rcar: enable to use thermal-zone on DT
      6) ARM: shmobile: r8a7790: enable to use thermal-zone
      7) ARM: shmobile: r8a7791: enable to use thermal-zone
      8) thermal: of-thermal: of_thermal_set_trip_temp() call thermal_zone_device_update()

 Documentation/devicetree/bindings/thermal/rcar-thermal.txt | 37 +++++++++++++++++++++++++++++++++++--
 arch/arm/boot/dts/r8a7790.dtsi                             | 26 ++++++++++++++++++++++++--
 arch/arm/boot/dts/r8a7791.dtsi                             | 26 ++++++++++++++++++++++++--
 drivers/thermal/of-thermal.c                               |  2 ++
 drivers/thermal/rcar_thermal.c                             | 96 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---------------------
 5 files changed, 160 insertions(+), 27 deletions(-)

Best regards
---
Kuninori Morimoto
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 2/8 v2] thermal: rcar: check every rcar_thermal_update_temp() return value

[Kuninori Morimoto]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
v1 -> v2

 - new patch

 drivers/thermal/rcar_thermal.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 96707a6..4d1bc2b 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -210,8 +210,11 @@ static int rcar_thermal_get_temp(struct thermal_zone_device *zone, int *temp)
 {
 	struct rcar_thermal_priv *priv = rcar_zone_to_priv(zone);
 
-	if (!rcar_has_irq_support(priv) || rcar_force_update_temp(priv))
-		rcar_thermal_update_temp(priv);
+	if (!rcar_has_irq_support(priv) || rcar_force_update_temp(priv)) {
+		int ret = rcar_thermal_update_temp(priv);
+		if (ret < 0)
+			return ret;
+	}
 
 	mutex_lock(&priv->lock);
 	*temp =  MCELSIUS((priv->ctemp * 5) - 65);
@@ -305,11 +308,15 @@ static void rcar_thermal_work(struct work_struct *work)
 {
 	struct rcar_thermal_priv *priv;
 	int cctemp, nctemp;
+	int ret;
 
 	priv = container_of(work, struct rcar_thermal_priv, work.work);
 
 	rcar_thermal_get_temp(priv->zone, &cctemp);
-	rcar_thermal_update_temp(priv);
+	ret = rcar_thermal_update_temp(priv);
+	if (ret < 0)
+		return;
+
 	rcar_thermal_irq_enable(priv);
 
 	rcar_thermal_get_temp(priv->zone, &nctemp);
@@ -447,7 +454,9 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 		mutex_init(&priv->lock);
 		INIT_LIST_HEAD(&priv->list);
 		INIT_DELAYED_WORK(&priv->work, rcar_thermal_work);
-		rcar_thermal_update_temp(priv);
+		ret = rcar_thermal_update_temp(priv);
+		if (ret < 0)
+			goto error_unregister;
 
 		priv->zone = thermal_zone_device_register("rcar_thermal",
 						1, 0, priv,
-- 
1.9.1

[PATCH 2/8 v2] thermal: rcar: check every rcar_thermal_update_temp() return value

[Kuninori Morimoto]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
v1 -> v2

 - new patch

 drivers/thermal/rcar_thermal.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 96707a6..4d1bc2b 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -210,8 +210,11 @@ static int rcar_thermal_get_temp(struct thermal_zone_device *zone, int *temp)
 {
 	struct rcar_thermal_priv *priv = rcar_zone_to_priv(zone);
 
-	if (!rcar_has_irq_support(priv) || rcar_force_update_temp(priv))
-		rcar_thermal_update_temp(priv);
+	if (!rcar_has_irq_support(priv) || rcar_force_update_temp(priv)) {
+		int ret = rcar_thermal_update_temp(priv);
+		if (ret < 0)
+			return ret;
+	}
 
 	mutex_lock(&priv->lock);
 	*temp =  MCELSIUS((priv->ctemp * 5) - 65);
@@ -305,11 +308,15 @@ static void rcar_thermal_work(struct work_struct *work)
 {
 	struct rcar_thermal_priv *priv;
 	int cctemp, nctemp;
+	int ret;
 
 	priv = container_of(work, struct rcar_thermal_priv, work.work);
 
 	rcar_thermal_get_temp(priv->zone, &cctemp);
-	rcar_thermal_update_temp(priv);
+	ret = rcar_thermal_update_temp(priv);
+	if (ret < 0)
+		return;
+
 	rcar_thermal_irq_enable(priv);
 
 	rcar_thermal_get_temp(priv->zone, &nctemp);
@@ -447,7 +454,9 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 		mutex_init(&priv->lock);
 		INIT_LIST_HEAD(&priv->list);
 		INIT_DELAYED_WORK(&priv->work, rcar_thermal_work);
-		rcar_thermal_update_temp(priv);
+		ret = rcar_thermal_update_temp(priv);
+		if (ret < 0)
+			goto error_unregister;
 
 		priv->zone = thermal_zone_device_register("rcar_thermal",
 						1, 0, priv,
-- 
1.9.1

[PATCH 2/8 v2] thermal: rcar: check every rcar_thermal_update_temp() return value

[Kuninori Morimoto]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
v1 -> v2

 - new patch

 drivers/thermal/rcar_thermal.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 96707a6..4d1bc2b 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -210,8 +210,11 @@ static int rcar_thermal_get_temp(struct thermal_zone_device *zone, int *temp)
 {
 	struct rcar_thermal_priv *priv = rcar_zone_to_priv(zone);
 
-	if (!rcar_has_irq_support(priv) || rcar_force_update_temp(priv))
-		rcar_thermal_update_temp(priv);
+	if (!rcar_has_irq_support(priv) || rcar_force_update_temp(priv)) {
+		int ret = rcar_thermal_update_temp(priv);
+		if (ret < 0)
+			return ret;
+	}
 
 	mutex_lock(&priv->lock);
 	*temp =  MCELSIUS((priv->ctemp * 5) - 65);
@@ -305,11 +308,15 @@ static void rcar_thermal_work(struct work_struct *work)
 {
 	struct rcar_thermal_priv *priv;
 	int cctemp, nctemp;
+	int ret;
 
 	priv = container_of(work, struct rcar_thermal_priv, work.work);
 
 	rcar_thermal_get_temp(priv->zone, &cctemp);
-	rcar_thermal_update_temp(priv);
+	ret = rcar_thermal_update_temp(priv);
+	if (ret < 0)
+		return;
+
 	rcar_thermal_irq_enable(priv);
 
 	rcar_thermal_get_temp(priv->zone, &nctemp);
@@ -447,7 +454,9 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 		mutex_init(&priv->lock);
 		INIT_LIST_HEAD(&priv->list);
 		INIT_DELAYED_WORK(&priv->work, rcar_thermal_work);
-		rcar_thermal_update_temp(priv);
+		ret = rcar_thermal_update_temp(priv);
+		if (ret < 0)
+			goto error_unregister;
 
 		priv->zone = thermal_zone_device_register("rcar_thermal",
 						1, 0, priv,
-- 
1.9.1

[PATCH 3/8 v2] thermal: rcar: check irq possibility in rcar_thermal_irq_xxx()

[Kuninori Morimoto]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Current rcar thermal driver sometimes checks irq possibility when it
calls rcar_thermal_irq_enable/disable(), but sometimes not.
This patch checks it inside rcar_thermal_irq_enable/disable().

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
v1 -> v2

 - new patch

 drivers/thermal/rcar_thermal.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 4d1bc2b..aaedf37 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -297,6 +297,9 @@ static void _rcar_thermal_irq_ctrl(struct rcar_thermal_priv *priv, int enable)
 	unsigned long flags;
 	u32 mask = 0x3 << rcar_id_to_shift(priv); /* enable Rising/Falling */
 
+	if (!rcar_has_irq_support(priv))
+		return;
+
 	spin_lock_irqsave(&common->lock, flags);
 
 	rcar_thermal_common_bset(common, INTMSK, mask, enable ? 0 : mask);
@@ -381,8 +384,7 @@ static int rcar_thermal_remove(struct platform_device *pdev)
 	struct rcar_thermal_priv *priv;
 
 	rcar_thermal_for_each_priv(priv, common) {
-		if (rcar_has_irq_support(priv))
-			rcar_thermal_irq_disable(priv);
+		rcar_thermal_irq_disable(priv);
 		thermal_zone_device_unregister(priv->zone);
 	}
 
@@ -468,8 +470,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 			goto error_unregister;
 		}
 
-		if (rcar_has_irq_support(priv))
-			rcar_thermal_irq_enable(priv);
+		rcar_thermal_irq_enable(priv);
 
 		list_move_tail(&priv->list, &common->head);
 
-- 
1.9.1

[PATCH 3/8 v2] thermal: rcar: check irq possibility in rcar_thermal_irq_xxx()

[Kuninori Morimoto]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Current rcar thermal driver sometimes checks irq possibility when it
calls rcar_thermal_irq_enable/disable(), but sometimes not.
This patch checks it inside rcar_thermal_irq_enable/disable().

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
v1 -> v2

 - new patch

 drivers/thermal/rcar_thermal.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 4d1bc2b..aaedf37 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -297,6 +297,9 @@ static void _rcar_thermal_irq_ctrl(struct rcar_thermal_priv *priv, int enable)
 	unsigned long flags;
 	u32 mask = 0x3 << rcar_id_to_shift(priv); /* enable Rising/Falling */
 
+	if (!rcar_has_irq_support(priv))
+		return;
+
 	spin_lock_irqsave(&common->lock, flags);
 
 	rcar_thermal_common_bset(common, INTMSK, mask, enable ? 0 : mask);
@@ -381,8 +384,7 @@ static int rcar_thermal_remove(struct platform_device *pdev)
 	struct rcar_thermal_priv *priv;
 
 	rcar_thermal_for_each_priv(priv, common) {
-		if (rcar_has_irq_support(priv))
-			rcar_thermal_irq_disable(priv);
+		rcar_thermal_irq_disable(priv);
 		thermal_zone_device_unregister(priv->zone);
 	}
 
@@ -468,8 +470,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 			goto error_unregister;
 		}
 
-		if (rcar_has_irq_support(priv))
-			rcar_thermal_irq_enable(priv);
+		rcar_thermal_irq_enable(priv);
 
 		list_move_tail(&priv->list, &common->head);
 
-- 
1.9.1

[PATCH 3/8 v2] thermal: rcar: check irq possibility in rcar_thermal_irq_xxx()

[Kuninori Morimoto]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Current rcar thermal driver sometimes checks irq possibility when it
calls rcar_thermal_irq_enable/disable(), but sometimes not.
This patch checks it inside rcar_thermal_irq_enable/disable().

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
v1 -> v2

 - new patch

 drivers/thermal/rcar_thermal.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 4d1bc2b..aaedf37 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -297,6 +297,9 @@ static void _rcar_thermal_irq_ctrl(struct rcar_thermal_priv *priv, int enable)
 	unsigned long flags;
 	u32 mask = 0x3 << rcar_id_to_shift(priv); /* enable Rising/Falling */
 
+	if (!rcar_has_irq_support(priv))
+		return;
+
 	spin_lock_irqsave(&common->lock, flags);
 
 	rcar_thermal_common_bset(common, INTMSK, mask, enable ? 0 : mask);
@@ -381,8 +384,7 @@ static int rcar_thermal_remove(struct platform_device *pdev)
 	struct rcar_thermal_priv *priv;
 
 	rcar_thermal_for_each_priv(priv, common) {
-		if (rcar_has_irq_support(priv))
-			rcar_thermal_irq_disable(priv);
+		rcar_thermal_irq_disable(priv);
 		thermal_zone_device_unregister(priv->zone);
 	}
 
@@ -468,8 +470,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 			goto error_unregister;
 		}
 
-		if (rcar_has_irq_support(priv))
-			rcar_thermal_irq_enable(priv);
+		rcar_thermal_irq_enable(priv);
 
 		list_move_tail(&priv->list, &common->head);
 
-- 
1.9.1

[PATCH 4/8 v2] thermal: rcar: retern error rcar_thermal_get_temp() if no ctemp update

[Kuninori Morimoto]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Current rcar_thermal_get_temp() returns latest temperature, but it might
not be updated if some HW issue happend. This means user might get
wrong temperature. This patch solved this issue.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
v1 -> v2

 - new patch

 drivers/thermal/rcar_thermal.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index aaedf37..52493b4 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -199,9 +199,9 @@ static int rcar_thermal_update_temp(struct rcar_thermal_priv *priv)
 
 	dev_dbg(dev, "thermal%d  %d -> %d\n", priv->id, priv->ctemp, ctemp);
 
-	priv->ctemp = ctemp;
 	ret = 0;
 err_out_unlock:
+	priv->ctemp = ctemp;
 	mutex_unlock(&priv->lock);
 	return ret;
 }
@@ -209,6 +209,7 @@ err_out_unlock:
 static int rcar_thermal_get_temp(struct thermal_zone_device *zone, int *temp)
 {
 	struct rcar_thermal_priv *priv = rcar_zone_to_priv(zone);
+	int tmp;
 
 	if (!rcar_has_irq_support(priv) || rcar_force_update_temp(priv)) {
 		int ret = rcar_thermal_update_temp(priv);
@@ -217,9 +218,18 @@ static int rcar_thermal_get_temp(struct thermal_zone_device *zone, int *temp)
 	}
 
 	mutex_lock(&priv->lock);
-	*temp =  MCELSIUS((priv->ctemp * 5) - 65);
+	tmp =  MCELSIUS((priv->ctemp * 5) - 65);
 	mutex_unlock(&priv->lock);
 
+	if ((tmp < MCELSIUS(-45)) || (tmp > MCELSIUS(125))) {
+		struct device *dev = rcar_priv_to_dev(priv);
+
+		dev_err(dev, "it couldn't measure temperature correctly\n");
+		return -EIO;
+	}
+
+	*temp = tmp;
+
 	return 0;
 }
 
-- 
1.9.1

[PATCH 4/8 v2] thermal: rcar: retern error rcar_thermal_get_temp() if no ctemp update

[Kuninori Morimoto]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Current rcar_thermal_get_temp() returns latest temperature, but it might
not be updated if some HW issue happend. This means user might get
wrong temperature. This patch solved this issue.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
v1 -> v2

 - new patch

 drivers/thermal/rcar_thermal.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index aaedf37..52493b4 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -199,9 +199,9 @@ static int rcar_thermal_update_temp(struct rcar_thermal_priv *priv)
 
 	dev_dbg(dev, "thermal%d  %d -> %d\n", priv->id, priv->ctemp, ctemp);
 
-	priv->ctemp = ctemp;
 	ret = 0;
 err_out_unlock:
+	priv->ctemp = ctemp;
 	mutex_unlock(&priv->lock);
 	return ret;
 }
@@ -209,6 +209,7 @@ err_out_unlock:
 static int rcar_thermal_get_temp(struct thermal_zone_device *zone, int *temp)
 {
 	struct rcar_thermal_priv *priv = rcar_zone_to_priv(zone);
+	int tmp;
 
 	if (!rcar_has_irq_support(priv) || rcar_force_update_temp(priv)) {
 		int ret = rcar_thermal_update_temp(priv);
@@ -217,9 +218,18 @@ static int rcar_thermal_get_temp(struct thermal_zone_device *zone, int *temp)
 	}
 
 	mutex_lock(&priv->lock);
-	*temp =  MCELSIUS((priv->ctemp * 5) - 65);
+	tmp =  MCELSIUS((priv->ctemp * 5) - 65);
 	mutex_unlock(&priv->lock);
 
+	if ((tmp < MCELSIUS(-45)) || (tmp > MCELSIUS(125))) {
+		struct device *dev = rcar_priv_to_dev(priv);
+
+		dev_err(dev, "it couldn't measure temperature correctly\n");
+		return -EIO;
+	}
+
+	*temp = tmp;
+
 	return 0;
 }
 
-- 
1.9.1

[PATCH 4/8 v2] thermal: rcar: retern error rcar_thermal_get_temp() if no ctemp update

[Kuninori Morimoto]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Current rcar_thermal_get_temp() returns latest temperature, but it might
not be updated if some HW issue happend. This means user might get
wrong temperature. This patch solved this issue.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
v1 -> v2

 - new patch

 drivers/thermal/rcar_thermal.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index aaedf37..52493b4 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -199,9 +199,9 @@ static int rcar_thermal_update_temp(struct rcar_thermal_priv *priv)
 
 	dev_dbg(dev, "thermal%d  %d -> %d\n", priv->id, priv->ctemp, ctemp);
 
-	priv->ctemp = ctemp;
 	ret = 0;
 err_out_unlock:
+	priv->ctemp = ctemp;
 	mutex_unlock(&priv->lock);
 	return ret;
 }
@@ -209,6 +209,7 @@ err_out_unlock:
 static int rcar_thermal_get_temp(struct thermal_zone_device *zone, int *temp)
 {
 	struct rcar_thermal_priv *priv = rcar_zone_to_priv(zone);
+	int tmp;
 
 	if (!rcar_has_irq_support(priv) || rcar_force_update_temp(priv)) {
 		int ret = rcar_thermal_update_temp(priv);
@@ -217,9 +218,18 @@ static int rcar_thermal_get_temp(struct thermal_zone_device *zone, int *temp)
 	}
 
 	mutex_lock(&priv->lock);
-	*temp =  MCELSIUS((priv->ctemp * 5) - 65);
+	tmp =  MCELSIUS((priv->ctemp * 5) - 65);
 	mutex_unlock(&priv->lock);
 
+	if ((tmp < MCELSIUS(-45)) || (tmp > MCELSIUS(125))) {
+		struct device *dev = rcar_priv_to_dev(priv);
+
+		dev_err(dev, "it couldn't measure temperature correctly\n");
+		return -EIO;
+	}
+
+	*temp = tmp;
+
 	return 0;
 }
 
-- 
1.9.1

[PATCH 5/8 v2] thermal: rcar: enable to use thermal-zone on DT

[Kuninori Morimoto]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch enables to use thermal-zone on DT if it was call as
"renesas,rcar-thermal-gen2".
Previous style is still supported by "renesas,rcar-thermal".

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
v1 -> v2

 - get_temp cares return value

 .../devicetree/bindings/thermal/rcar-thermal.txt   | 37 +++++++++++++++++-
 drivers/thermal/rcar_thermal.c                     | 44 +++++++++++++++++++---
 2 files changed, 74 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
index 332e625..904f204 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
@@ -1,8 +1,9 @@
 * Renesas R-Car Thermal
 
 Required properties:
-- compatible		: "renesas,thermal-<soctype>", "renesas,rcar-thermal"
-			  as fallback.
+- compatible		: "renesas,thermal-<soctype>",
+			   "renesas,rcar-thermal-gen2" (with thermal-zone) or
+			   "renesas,rcar-thermal" (without thermal-zone) as fallback.
 			  Examples with soctypes are:
 			    - "renesas,thermal-r8a73a4" (R-Mobile APE6)
 			    - "renesas,thermal-r8a7779" (R-Car H1)
@@ -36,3 +37,35 @@ thermal@e61f0000 {
 		0xe61f0300 0x38>;
 	interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
 };
+
+Example (with thermal-zone):
+
+thermal-zones {
+	cpu_thermal: cpu-thermal {
+		polling-delay-passive	= <1000>;
+		polling-delay		= <5000>;
+
+		thermal-sensors = <&thermal>;
+
+		trips {
+			cpu-crit {
+				temperature	= <1150000>;
+				hysteresis	= <0>;
+				type		= "critical";
+			};
+		};
+		cooling-maps {
+		};
+	};
+};
+
+thermal: thermal@e61f0000 {
+	compatible =	"renesas,thermal-r8a7790",
+			"renesas,rcar-thermal-gen2",
+			"renesas,rcar-thermal";
+	reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
+	interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
+	power-domains = <&cpg_clocks>;
+	#thermal-sensor-cells = <0>;
+};
diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 52493b4..79ec26d 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -23,6 +23,7 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/reboot.h>
@@ -81,8 +82,10 @@ struct rcar_thermal_priv {
 # define rcar_force_update_temp(priv)	0
 #endif
 
+#define USE_OF_THERMAL	1
 static const struct of_device_id rcar_thermal_dt_ids[] = {
 	{ .compatible = "renesas,rcar-thermal", },
+	{ .compatible = "renesas,rcar-thermal-gen2", .data = (void *)USE_OF_THERMAL },
 	{},
 };
 MODULE_DEVICE_TABLE(of, rcar_thermal_dt_ids);
@@ -206,9 +209,8 @@ err_out_unlock:
 	return ret;
 }
 
-static int rcar_thermal_get_temp(struct thermal_zone_device *zone, int *temp)
+static int rcar_thermal_get_current_temp(struct rcar_thermal_priv *priv, int *temp)
 {
-	struct rcar_thermal_priv *priv = rcar_zone_to_priv(zone);
 	int tmp;
 
 	if (!rcar_has_irq_support(priv) || rcar_force_update_temp(priv)) {
@@ -233,6 +235,20 @@ static int rcar_thermal_get_temp(struct thermal_zone_device *zone, int *temp)
 	return 0;
 }
 
+static int rcar_thermal_of_get_temp(void *data, int *temp)
+{
+	struct rcar_thermal_priv *priv = data;
+
+	return rcar_thermal_get_current_temp(priv, temp);
+}
+
+static int rcar_thermal_get_temp(struct thermal_zone_device *zone, int *temp)
+{
+	struct rcar_thermal_priv *priv = rcar_zone_to_priv(zone);
+
+	return rcar_thermal_get_current_temp(priv, temp);
+}
+
 static int rcar_thermal_get_trip_type(struct thermal_zone_device *zone,
 				      int trip, enum thermal_trip_type *type)
 {
@@ -289,6 +305,10 @@ static int rcar_thermal_notify(struct thermal_zone_device *zone,
 	return 0;
 }
 
+static const struct thermal_zone_of_device_ops rcar_thermal_zone_of_ops = {
+	.get_temp	= rcar_thermal_of_get_temp,
+};
+
 static struct thermal_zone_device_ops rcar_thermal_zone_ops = {
 	.get_temp	= rcar_thermal_get_temp,
 	.get_trip_type	= rcar_thermal_get_trip_type,
@@ -325,14 +345,20 @@ static void rcar_thermal_work(struct work_struct *work)
 
 	priv = container_of(work, struct rcar_thermal_priv, work.work);
 
-	rcar_thermal_get_temp(priv->zone, &cctemp);
+	ret = rcar_thermal_get_current_temp(priv, &cctemp);
+	if (ret < 0)
+		return;
+
 	ret = rcar_thermal_update_temp(priv);
 	if (ret < 0)
 		return;
 
 	rcar_thermal_irq_enable(priv);
 
-	rcar_thermal_get_temp(priv->zone, &nctemp);
+	ret = rcar_thermal_get_current_temp(priv, &nctemp);
+	if (ret < 0)
+		return;
+
 	if (nctemp != cctemp)
 		thermal_zone_device_update(priv->zone);
 }
@@ -410,6 +436,8 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 	struct rcar_thermal_priv *priv;
 	struct device *dev = &pdev->dev;
 	struct resource *res, *irq;
+	const struct of_device_id *of_id = of_match_device(rcar_thermal_dt_ids, dev);
+	unsigned long of_data = (unsigned long)of_id->data;
 	int mres = 0;
 	int i;
 	int ret = -ENODEV;
@@ -470,7 +498,13 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 		if (ret < 0)
 			goto error_unregister;
 
-		priv->zone = thermal_zone_device_register("rcar_thermal",
+		if (of_data = USE_OF_THERMAL)
+			priv->zone = thermal_zone_of_sensor_register(
+						dev, i, priv,
+						&rcar_thermal_zone_of_ops);
+		else
+			priv->zone = thermal_zone_device_register(
+						"rcar_thermal",
 						1, 0, priv,
 						&rcar_thermal_zone_ops, NULL, 0,
 						idle);
-- 
1.9.1

[PATCH 5/8 v2] thermal: rcar: enable to use thermal-zone on DT

[Kuninori Morimoto]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch enables to use thermal-zone on DT if it was call as
"renesas,rcar-thermal-gen2".
Previous style is still supported by "renesas,rcar-thermal".

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
v1 -> v2

 - get_temp cares return value

 .../devicetree/bindings/thermal/rcar-thermal.txt   | 37 +++++++++++++++++-
 drivers/thermal/rcar_thermal.c                     | 44 +++++++++++++++++++---
 2 files changed, 74 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
index 332e625..904f204 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
@@ -1,8 +1,9 @@
 * Renesas R-Car Thermal
 
 Required properties:
-- compatible		: "renesas,thermal-<soctype>", "renesas,rcar-thermal"
-			  as fallback.
+- compatible		: "renesas,thermal-<soctype>",
+			   "renesas,rcar-thermal-gen2" (with thermal-zone) or
+			   "renesas,rcar-thermal" (without thermal-zone) as fallback.
 			  Examples with soctypes are:
 			    - "renesas,thermal-r8a73a4" (R-Mobile APE6)
 			    - "renesas,thermal-r8a7779" (R-Car H1)
@@ -36,3 +37,35 @@ thermal@e61f0000 {
 		0xe61f0300 0x38>;
 	interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
 };
+
+Example (with thermal-zone):
+
+thermal-zones {
+	cpu_thermal: cpu-thermal {
+		polling-delay-passive	= <1000>;
+		polling-delay		= <5000>;
+
+		thermal-sensors = <&thermal>;
+
+		trips {
+			cpu-crit {
+				temperature	= <1150000>;
+				hysteresis	= <0>;
+				type		= "critical";
+			};
+		};
+		cooling-maps {
+		};
+	};
+};
+
+thermal: thermal@e61f0000 {
+	compatible =	"renesas,thermal-r8a7790",
+			"renesas,rcar-thermal-gen2",
+			"renesas,rcar-thermal";
+	reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
+	interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
+	power-domains = <&cpg_clocks>;
+	#thermal-sensor-cells = <0>;
+};
diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 52493b4..79ec26d 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -23,6 +23,7 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/reboot.h>
@@ -81,8 +82,10 @@ struct rcar_thermal_priv {
 # define rcar_force_update_temp(priv)	0
 #endif
 
+#define USE_OF_THERMAL	1
 static const struct of_device_id rcar_thermal_dt_ids[] = {
 	{ .compatible = "renesas,rcar-thermal", },
+	{ .compatible = "renesas,rcar-thermal-gen2", .data = (void *)USE_OF_THERMAL },
 	{},
 };
 MODULE_DEVICE_TABLE(of, rcar_thermal_dt_ids);
@@ -206,9 +209,8 @@ err_out_unlock:
 	return ret;
 }
 
-static int rcar_thermal_get_temp(struct thermal_zone_device *zone, int *temp)
+static int rcar_thermal_get_current_temp(struct rcar_thermal_priv *priv, int *temp)
 {
-	struct rcar_thermal_priv *priv = rcar_zone_to_priv(zone);
 	int tmp;
 
 	if (!rcar_has_irq_support(priv) || rcar_force_update_temp(priv)) {
@@ -233,6 +235,20 @@ static int rcar_thermal_get_temp(struct thermal_zone_device *zone, int *temp)
 	return 0;
 }
 
+static int rcar_thermal_of_get_temp(void *data, int *temp)
+{
+	struct rcar_thermal_priv *priv = data;
+
+	return rcar_thermal_get_current_temp(priv, temp);
+}
+
+static int rcar_thermal_get_temp(struct thermal_zone_device *zone, int *temp)
+{
+	struct rcar_thermal_priv *priv = rcar_zone_to_priv(zone);
+
+	return rcar_thermal_get_current_temp(priv, temp);
+}
+
 static int rcar_thermal_get_trip_type(struct thermal_zone_device *zone,
 				      int trip, enum thermal_trip_type *type)
 {
@@ -289,6 +305,10 @@ static int rcar_thermal_notify(struct thermal_zone_device *zone,
 	return 0;
 }
 
+static const struct thermal_zone_of_device_ops rcar_thermal_zone_of_ops = {
+	.get_temp	= rcar_thermal_of_get_temp,
+};
+
 static struct thermal_zone_device_ops rcar_thermal_zone_ops = {
 	.get_temp	= rcar_thermal_get_temp,
 	.get_trip_type	= rcar_thermal_get_trip_type,
@@ -325,14 +345,20 @@ static void rcar_thermal_work(struct work_struct *work)
 
 	priv = container_of(work, struct rcar_thermal_priv, work.work);
 
-	rcar_thermal_get_temp(priv->zone, &cctemp);
+	ret = rcar_thermal_get_current_temp(priv, &cctemp);
+	if (ret < 0)
+		return;
+
 	ret = rcar_thermal_update_temp(priv);
 	if (ret < 0)
 		return;
 
 	rcar_thermal_irq_enable(priv);
 
-	rcar_thermal_get_temp(priv->zone, &nctemp);
+	ret = rcar_thermal_get_current_temp(priv, &nctemp);
+	if (ret < 0)
+		return;
+
 	if (nctemp != cctemp)
 		thermal_zone_device_update(priv->zone);
 }
@@ -410,6 +436,8 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 	struct rcar_thermal_priv *priv;
 	struct device *dev = &pdev->dev;
 	struct resource *res, *irq;
+	const struct of_device_id *of_id = of_match_device(rcar_thermal_dt_ids, dev);
+	unsigned long of_data = (unsigned long)of_id->data;
 	int mres = 0;
 	int i;
 	int ret = -ENODEV;
@@ -470,7 +498,13 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 		if (ret < 0)
 			goto error_unregister;
 
-		priv->zone = thermal_zone_device_register("rcar_thermal",
+		if (of_data == USE_OF_THERMAL)
+			priv->zone = thermal_zone_of_sensor_register(
+						dev, i, priv,
+						&rcar_thermal_zone_of_ops);
+		else
+			priv->zone = thermal_zone_device_register(
+						"rcar_thermal",
 						1, 0, priv,
 						&rcar_thermal_zone_ops, NULL, 0,
 						idle);
-- 
1.9.1

[PATCH 5/8 v2] thermal: rcar: enable to use thermal-zone on DT

[Kuninori Morimoto]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch enables to use thermal-zone on DT if it was call as
"renesas,rcar-thermal-gen2".
Previous style is still supported by "renesas,rcar-thermal".

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
v1 -> v2

 - get_temp cares return value

 .../devicetree/bindings/thermal/rcar-thermal.txt   | 37 +++++++++++++++++-
 drivers/thermal/rcar_thermal.c                     | 44 +++++++++++++++++++---
 2 files changed, 74 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
index 332e625..904f204 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
@@ -1,8 +1,9 @@
 * Renesas R-Car Thermal
 
 Required properties:
-- compatible		: "renesas,thermal-<soctype>", "renesas,rcar-thermal"
-			  as fallback.
+- compatible		: "renesas,thermal-<soctype>",
+			   "renesas,rcar-thermal-gen2" (with thermal-zone) or
+			   "renesas,rcar-thermal" (without thermal-zone) as fallback.
 			  Examples with soctypes are:
 			    - "renesas,thermal-r8a73a4" (R-Mobile APE6)
 			    - "renesas,thermal-r8a7779" (R-Car H1)
@@ -36,3 +37,35 @@ thermal@e61f0000 {
 		0xe61f0300 0x38>;
 	interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
 };
+
+Example (with thermal-zone):
+
+thermal-zones {
+	cpu_thermal: cpu-thermal {
+		polling-delay-passive	= <1000>;
+		polling-delay		= <5000>;
+
+		thermal-sensors = <&thermal>;
+
+		trips {
+			cpu-crit {
+				temperature	= <1150000>;
+				hysteresis	= <0>;
+				type		= "critical";
+			};
+		};
+		cooling-maps {
+		};
+	};
+};
+
+thermal: thermal@e61f0000 {
+	compatible =	"renesas,thermal-r8a7790",
+			"renesas,rcar-thermal-gen2",
+			"renesas,rcar-thermal";
+	reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
+	interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
+	power-domains = <&cpg_clocks>;
+	#thermal-sensor-cells = <0>;
+};
diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 52493b4..79ec26d 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -23,6 +23,7 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/reboot.h>
@@ -81,8 +82,10 @@ struct rcar_thermal_priv {
 # define rcar_force_update_temp(priv)	0
 #endif
 
+#define USE_OF_THERMAL	1
 static const struct of_device_id rcar_thermal_dt_ids[] = {
 	{ .compatible = "renesas,rcar-thermal", },
+	{ .compatible = "renesas,rcar-thermal-gen2", .data = (void *)USE_OF_THERMAL },
 	{},
 };
 MODULE_DEVICE_TABLE(of, rcar_thermal_dt_ids);
@@ -206,9 +209,8 @@ err_out_unlock:
 	return ret;
 }
 
-static int rcar_thermal_get_temp(struct thermal_zone_device *zone, int *temp)
+static int rcar_thermal_get_current_temp(struct rcar_thermal_priv *priv, int *temp)
 {
-	struct rcar_thermal_priv *priv = rcar_zone_to_priv(zone);
 	int tmp;
 
 	if (!rcar_has_irq_support(priv) || rcar_force_update_temp(priv)) {
@@ -233,6 +235,20 @@ static int rcar_thermal_get_temp(struct thermal_zone_device *zone, int *temp)
 	return 0;
 }
 
+static int rcar_thermal_of_get_temp(void *data, int *temp)
+{
+	struct rcar_thermal_priv *priv = data;
+
+	return rcar_thermal_get_current_temp(priv, temp);
+}
+
+static int rcar_thermal_get_temp(struct thermal_zone_device *zone, int *temp)
+{
+	struct rcar_thermal_priv *priv = rcar_zone_to_priv(zone);
+
+	return rcar_thermal_get_current_temp(priv, temp);
+}
+
 static int rcar_thermal_get_trip_type(struct thermal_zone_device *zone,
 				      int trip, enum thermal_trip_type *type)
 {
@@ -289,6 +305,10 @@ static int rcar_thermal_notify(struct thermal_zone_device *zone,
 	return 0;
 }
 
+static const struct thermal_zone_of_device_ops rcar_thermal_zone_of_ops = {
+	.get_temp	= rcar_thermal_of_get_temp,
+};
+
 static struct thermal_zone_device_ops rcar_thermal_zone_ops = {
 	.get_temp	= rcar_thermal_get_temp,
 	.get_trip_type	= rcar_thermal_get_trip_type,
@@ -325,14 +345,20 @@ static void rcar_thermal_work(struct work_struct *work)
 
 	priv = container_of(work, struct rcar_thermal_priv, work.work);
 
-	rcar_thermal_get_temp(priv->zone, &cctemp);
+	ret = rcar_thermal_get_current_temp(priv, &cctemp);
+	if (ret < 0)
+		return;
+
 	ret = rcar_thermal_update_temp(priv);
 	if (ret < 0)
 		return;
 
 	rcar_thermal_irq_enable(priv);
 
-	rcar_thermal_get_temp(priv->zone, &nctemp);
+	ret = rcar_thermal_get_current_temp(priv, &nctemp);
+	if (ret < 0)
+		return;
+
 	if (nctemp != cctemp)
 		thermal_zone_device_update(priv->zone);
 }
@@ -410,6 +436,8 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 	struct rcar_thermal_priv *priv;
 	struct device *dev = &pdev->dev;
 	struct resource *res, *irq;
+	const struct of_device_id *of_id = of_match_device(rcar_thermal_dt_ids, dev);
+	unsigned long of_data = (unsigned long)of_id->data;
 	int mres = 0;
 	int i;
 	int ret = -ENODEV;
@@ -470,7 +498,13 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 		if (ret < 0)
 			goto error_unregister;
 
-		priv->zone = thermal_zone_device_register("rcar_thermal",
+		if (of_data == USE_OF_THERMAL)
+			priv->zone = thermal_zone_of_sensor_register(
+						dev, i, priv,
+						&rcar_thermal_zone_of_ops);
+		else
+			priv->zone = thermal_zone_device_register(
+						"rcar_thermal",
 						1, 0, priv,
 						&rcar_thermal_zone_ops, NULL, 0,
 						idle);
-- 
1.9.1

[PATCH 6/8 v2] ARM: shmobile: r8a7790: enable to use thermal-zone

[Kuninori Morimoto]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch enables to use thermal-zone on r8a7790.
This thermal sensor can measure temperature from -40000 to 125000,
but over 117000 can be critical on this chip.
Thus, default critical temperature is now set as 115000 (this driver
is using 5000 steps) (Current critical temperature is using it as
90000, but there is no big reason about it)

And it doesn't check thermal zone periodically (same as current
behavior). You can exchange it by modifing polling-delay[-passive]
property.

You can set trip temp if your kernel has CONFIG_THERMAL_WRITABLE_TRIPS,
but you need to take care to use it, since it will call
orderly_poweroff() it it reached to the value.
echo $temp > /sys/class/thermal/thermal_zone0/trip_point_0_temp

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
v1 -> v2

 - no change

 arch/arm/boot/dts/r8a7790.dtsi | 26 ++++++++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 6cfd0dc..bbbc3cd 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -112,6 +112,25 @@
 		};
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive	= <0>;
+			polling-delay		= <0>;
+
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature	= <1150000>;
+					hysteresis	= <0>;
+					type		= "critical";
+				};
+			};
+			cooling-maps {
+			};
+		};
+	};
+
 	gic: interrupt-controller@f1001000 {
 		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;
@@ -202,12 +221,15 @@
 		power-domains = <&cpg_clocks>;
 	};
 
-	thermal@e61f0000 {
-		compatible = "renesas,thermal-r8a7790", "renesas,rcar-thermal";
+	thermal: thermal@e61f0000 {
+		compatible =	"renesas,thermal-r8a7790",
+				"renesas,rcar-thermal-gen2",
+				"renesas,rcar-thermal";
 		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
 		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
 		power-domains = <&cpg_clocks>;
+		#thermal-sensor-cells = <0>;
 	};
 
 	timer {
-- 
1.9.1

[PATCH 6/8 v2] ARM: shmobile: r8a7790: enable to use thermal-zone

[Kuninori Morimoto]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch enables to use thermal-zone on r8a7790.
This thermal sensor can measure temperature from -40000 to 125000,
but over 117000 can be critical on this chip.
Thus, default critical temperature is now set as 115000 (this driver
is using 5000 steps) (Current critical temperature is using it as
90000, but there is no big reason about it)

And it doesn't check thermal zone periodically (same as current
behavior). You can exchange it by modifing polling-delay[-passive]
property.

You can set trip temp if your kernel has CONFIG_THERMAL_WRITABLE_TRIPS,
but you need to take care to use it, since it will call
orderly_poweroff() it it reached to the value.
echo $temp > /sys/class/thermal/thermal_zone0/trip_point_0_temp

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
v1 -> v2

 - no change

 arch/arm/boot/dts/r8a7790.dtsi | 26 ++++++++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 6cfd0dc..bbbc3cd 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -112,6 +112,25 @@
 		};
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive	= <0>;
+			polling-delay		= <0>;
+
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature	= <1150000>;
+					hysteresis	= <0>;
+					type		= "critical";
+				};
+			};
+			cooling-maps {
+			};
+		};
+	};
+
 	gic: interrupt-controller@f1001000 {
 		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;
@@ -202,12 +221,15 @@
 		power-domains = <&cpg_clocks>;
 	};
 
-	thermal@e61f0000 {
-		compatible = "renesas,thermal-r8a7790", "renesas,rcar-thermal";
+	thermal: thermal@e61f0000 {
+		compatible =	"renesas,thermal-r8a7790",
+				"renesas,rcar-thermal-gen2",
+				"renesas,rcar-thermal";
 		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
 		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
 		power-domains = <&cpg_clocks>;
+		#thermal-sensor-cells = <0>;
 	};
 
 	timer {
-- 
1.9.1

[PATCH 6/8 v2] ARM: shmobile: r8a7790: enable to use thermal-zone

[Kuninori Morimoto]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch enables to use thermal-zone on r8a7790.
This thermal sensor can measure temperature from -40000 to 125000,
but over 117000 can be critical on this chip.
Thus, default critical temperature is now set as 115000 (this driver
is using 5000 steps) (Current critical temperature is using it as
90000, but there is no big reason about it)

And it doesn't check thermal zone periodically (same as current
behavior). You can exchange it by modifing polling-delay[-passive]
property.

You can set trip temp if your kernel has CONFIG_THERMAL_WRITABLE_TRIPS,
but you need to take care to use it, since it will call
orderly_poweroff() it it reached to the value.
echo $temp > /sys/class/thermal/thermal_zone0/trip_point_0_temp

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
v1 -> v2

 - no change

 arch/arm/boot/dts/r8a7790.dtsi | 26 ++++++++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 6cfd0dc..bbbc3cd 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -112,6 +112,25 @@
 		};
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive	= <0>;
+			polling-delay		= <0>;
+
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature	= <1150000>;
+					hysteresis	= <0>;
+					type		= "critical";
+				};
+			};
+			cooling-maps {
+			};
+		};
+	};
+
 	gic: interrupt-controller@f1001000 {
 		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;
@@ -202,12 +221,15 @@
 		power-domains = <&cpg_clocks>;
 	};
 
-	thermal@e61f0000 {
-		compatible = "renesas,thermal-r8a7790", "renesas,rcar-thermal";
+	thermal: thermal@e61f0000 {
+		compatible =	"renesas,thermal-r8a7790",
+				"renesas,rcar-thermal-gen2",
+				"renesas,rcar-thermal";
 		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
 		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
 		power-domains = <&cpg_clocks>;
+		#thermal-sensor-cells = <0>;
 	};
 
 	timer {
-- 
1.9.1

[PATCH 7/8 v2] ARM: shmobile: r8a7791: enable to use thermal-zone

[Kuninori Morimoto]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch enables to use thermal-zone on r8a7791.
This thermal sensor can measure temperature from -40000 to 125000,
but over 117000 can be critical on this chip.
Thus, default critical temperature is now set as 115000 (this driver
is using 5000 steps) (Current critical temperature is using it as
90000, but there is no big reason about it)

And it doesn't check thermal zone periodically (same as current
behavior). You can exchange it by modifing polling-delay[-passive]
property.

You can set trip temp if your kernel has CONFIG_THERMAL_WRITABLE_TRIPS,
but you need to take care to use it, since it will call
orderly_poweroff() it it reached to the value.
echo $temp > /sys/class/thermal/thermal_zone0/trip_point_0_temp

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
v1 -> v2

 - no change

 arch/arm/boot/dts/r8a7791.dtsi | 26 ++++++++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 1487d92..2fff856 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -69,6 +69,25 @@
 		};
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive	= <0>;
+			polling-delay		= <0>;
+
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature	= <1150000>;
+					hysteresis	= <0>;
+					type		= "critical";
+				};
+			};
+			cooling-maps {
+			};
+		};
+	};
+
 	gic: interrupt-controller@f1001000 {
 		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;
@@ -185,12 +204,15 @@
 		power-domains = <&cpg_clocks>;
 	};
 
-	thermal@e61f0000 {
-		compatible = "renesas,thermal-r8a7791", "renesas,rcar-thermal";
+	thermal: thermal@e61f0000 {
+		compatible =	"renesas,thermal-r8a7791",
+				"renesas,rcar-thermal-gen2",
+				"renesas,rcar-thermal";
 		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
 		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp5_clks R8A7791_CLK_THERMAL>;
 		power-domains = <&cpg_clocks>;
+		#thermal-sensor-cells = <0>;
 	};
 
 	timer {
-- 
1.9.1

[PATCH 7/8 v2] ARM: shmobile: r8a7791: enable to use thermal-zone

[Kuninori Morimoto]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch enables to use thermal-zone on r8a7791.
This thermal sensor can measure temperature from -40000 to 125000,
but over 117000 can be critical on this chip.
Thus, default critical temperature is now set as 115000 (this driver
is using 5000 steps) (Current critical temperature is using it as
90000, but there is no big reason about it)

And it doesn't check thermal zone periodically (same as current
behavior). You can exchange it by modifing polling-delay[-passive]
property.

You can set trip temp if your kernel has CONFIG_THERMAL_WRITABLE_TRIPS,
but you need to take care to use it, since it will call
orderly_poweroff() it it reached to the value.
echo $temp > /sys/class/thermal/thermal_zone0/trip_point_0_temp

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
v1 -> v2

 - no change

 arch/arm/boot/dts/r8a7791.dtsi | 26 ++++++++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 1487d92..2fff856 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -69,6 +69,25 @@
 		};
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive	= <0>;
+			polling-delay		= <0>;
+
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature	= <1150000>;
+					hysteresis	= <0>;
+					type		= "critical";
+				};
+			};
+			cooling-maps {
+			};
+		};
+	};
+
 	gic: interrupt-controller@f1001000 {
 		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;
@@ -185,12 +204,15 @@
 		power-domains = <&cpg_clocks>;
 	};
 
-	thermal@e61f0000 {
-		compatible = "renesas,thermal-r8a7791", "renesas,rcar-thermal";
+	thermal: thermal@e61f0000 {
+		compatible =	"renesas,thermal-r8a7791",
+				"renesas,rcar-thermal-gen2",
+				"renesas,rcar-thermal";
 		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
 		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp5_clks R8A7791_CLK_THERMAL>;
 		power-domains = <&cpg_clocks>;
+		#thermal-sensor-cells = <0>;
 	};
 
 	timer {
-- 
1.9.1

[PATCH 7/8 v2] ARM: shmobile: r8a7791: enable to use thermal-zone

[Kuninori Morimoto]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch enables to use thermal-zone on r8a7791.
This thermal sensor can measure temperature from -40000 to 125000,
but over 117000 can be critical on this chip.
Thus, default critical temperature is now set as 115000 (this driver
is using 5000 steps) (Current critical temperature is using it as
90000, but there is no big reason about it)

And it doesn't check thermal zone periodically (same as current
behavior). You can exchange it by modifing polling-delay[-passive]
property.

You can set trip temp if your kernel has CONFIG_THERMAL_WRITABLE_TRIPS,
but you need to take care to use it, since it will call
orderly_poweroff() it it reached to the value.
echo $temp > /sys/class/thermal/thermal_zone0/trip_point_0_temp

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
v1 -> v2

 - no change

 arch/arm/boot/dts/r8a7791.dtsi | 26 ++++++++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 1487d92..2fff856 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -69,6 +69,25 @@
 		};
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive	= <0>;
+			polling-delay		= <0>;
+
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature	= <1150000>;
+					hysteresis	= <0>;
+					type		= "critical";
+				};
+			};
+			cooling-maps {
+			};
+		};
+	};
+
 	gic: interrupt-controller@f1001000 {
 		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;
@@ -185,12 +204,15 @@
 		power-domains = <&cpg_clocks>;
 	};
 
-	thermal@e61f0000 {
-		compatible = "renesas,thermal-r8a7791", "renesas,rcar-thermal";
+	thermal: thermal@e61f0000 {
+		compatible =	"renesas,thermal-r8a7791",
+				"renesas,rcar-thermal-gen2",
+				"renesas,rcar-thermal";
 		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
 		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp5_clks R8A7791_CLK_THERMAL>;
 		power-domains = <&cpg_clocks>;
+		#thermal-sensor-cells = <0>;
 	};
 
 	timer {
-- 
1.9.1

[PATCH 8/8 v2] thermal: of-thermal: of_thermal_set_trip_temp() call thermal_zone_device_update()

[Kuninori Morimoto]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

of_thermal_set_trip_temp() updates trip temperature. It should call
thermal_zone_device_update() immediately.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
v1 -> v2

 - new patch

 drivers/thermal/of-thermal.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c
index be4eedc..d59595b 100644
--- a/drivers/thermal/of-thermal.c
+++ b/drivers/thermal/of-thermal.c
@@ -334,6 +334,8 @@ static int of_thermal_set_trip_temp(struct thermal_zone_device *tz, int trip,
 	/* thermal framework should take care of data->mask & (1 << trip) */
 	data->trips[trip].temperature = temp;
 
+	thermal_zone_device_update(tz);
+
 	return 0;
 }
 
-- 
1.9.1

[PATCH 8/8 v2] thermal: of-thermal: of_thermal_set_trip_temp() call thermal_zone_device_update()

[Kuninori Morimoto]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

of_thermal_set_trip_temp() updates trip temperature. It should call
thermal_zone_device_update() immediately.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
v1 -> v2

 - new patch

 drivers/thermal/of-thermal.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c
index be4eedc..d59595b 100644
--- a/drivers/thermal/of-thermal.c
+++ b/drivers/thermal/of-thermal.c
@@ -334,6 +334,8 @@ static int of_thermal_set_trip_temp(struct thermal_zone_device *tz, int trip,
 	/* thermal framework should take care of data->mask & (1 << trip) */
 	data->trips[trip].temperature = temp;
 
+	thermal_zone_device_update(tz);
+
 	return 0;
 }
 
-- 
1.9.1

[PATCH 8/8 v2] thermal: of-thermal: of_thermal_set_trip_temp() call thermal_zone_device_update()

[Kuninori Morimoto]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

of_thermal_set_trip_temp() updates trip temperature. It should call
thermal_zone_device_update() immediately.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
v1 -> v2

 - new patch

 drivers/thermal/of-thermal.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c
index be4eedc..d59595b 100644
--- a/drivers/thermal/of-thermal.c
+++ b/drivers/thermal/of-thermal.c
@@ -334,6 +334,8 @@ static int of_thermal_set_trip_temp(struct thermal_zone_device *tz, int trip,
 	/* thermal framework should take care of data->mask & (1 << trip) */
 	data->trips[trip].temperature = temp;
 
+	thermal_zone_device_update(tz);
+
 	return 0;
 }
 
-- 
1.9.1