* [PATCH v2 2/3] util: support detailed error reporting for qemu_open
2020-07-02 12:56 [PATCH v2 0/3] block: improve error reporting for unsupported O_DIRECT Daniel P. Berrangé
2020-07-02 12:56 ` [PATCH v2 1/3] util: validate whether O_DIRECT is supported after failure Daniel P. Berrangé
@ 2020-07-02 12:56 ` Daniel P. Berrangé
2020-07-08 6:55 ` Markus Armbruster
2020-07-02 12:56 ` [PATCH v2 3/3] block: switch to use qemu_open_err for improved errors Daniel P. Berrangé
2 siblings, 1 reply; 8+ messages in thread
From: Daniel P. Berrangé @ 2020-07-02 12:56 UTC (permalink / raw)
To: qemu-devel
Cc: Kevin Wolf, Daniel P. Berrangé,
qemu-block, Markus Armbruster, Philippe Mathieu-Daudé,
P J P, Max Reitz
Create a "qemu_open_err" method which does the same as "qemu_open",
but with a "Error **errp" for error reporting. There should be no
behavioural difference for existing callers at this stage.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
---
include/qemu/osdep.h | 2 ++
util/osdep.c | 66 +++++++++++++++++++++++++++++++++++---------
2 files changed, 55 insertions(+), 13 deletions(-)
diff --git a/include/qemu/osdep.h b/include/qemu/osdep.h
index 0d26a1b9bd..8506a978fa 100644
--- a/include/qemu/osdep.h
+++ b/include/qemu/osdep.h
@@ -483,6 +483,8 @@ int qemu_madvise(void *addr, size_t len, int advice);
int qemu_mprotect_rwx(void *addr, size_t size);
int qemu_mprotect_none(void *addr, size_t size);
+/* This is preferred over qemu_open for its improved error reporting */
+int qemu_open_err(const char *name, int flags, Error **errp, ...);
int qemu_open(const char *name, int flags, ...);
int qemu_close(int fd);
int qemu_unlink(const char *name);
diff --git a/util/osdep.c b/util/osdep.c
index e2b7507ee2..3de8bee463 100644
--- a/util/osdep.c
+++ b/util/osdep.c
@@ -22,6 +22,7 @@
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
+#include "qapi/error.h"
/* Needed early for CONFIG_BSD etc. */
@@ -282,7 +283,7 @@ int qemu_lock_fd_test(int fd, int64_t start, int64_t len, bool exclusive)
/*
* Opens a file with FD_CLOEXEC set
*/
-int qemu_open(const char *name, int flags, ...)
+static int qemu_openv(const char *name, int flags, Error **errp, va_list ap)
{
int ret;
int mode = 0;
@@ -297,24 +298,31 @@ int qemu_open(const char *name, int flags, ...)
fdset_id = qemu_parse_fdset(fdset_id_str);
if (fdset_id == -1) {
+ error_setg(errp, "Could not parse fdset %s", name);
errno = EINVAL;
return -1;
}
fd = monitor_fdset_get_fd(fdset_id, flags);
if (fd < 0) {
+ error_setg_errno(errp, -fd, "Could not acquire FD for %s flags %x",
+ name, flags);
errno = -fd;
return -1;
}
dupfd = qemu_dup_flags(fd, flags);
if (dupfd == -1) {
+ error_setg_errno(errp, errno, "Could not dup FD for %s flags %x",
+ name, flags);
return -1;
}
ret = monitor_fdset_dup_fd_add(fdset_id, dupfd);
if (ret == -1) {
close(dupfd);
+ error_setg(errp, "Could not save FD for %s flags %x",
+ name, flags);
errno = EINVAL;
return -1;
}
@@ -324,11 +332,7 @@ int qemu_open(const char *name, int flags, ...)
#endif
if (flags & O_CREAT) {
- va_list ap;
-
- va_start(ap, flags);
mode = va_arg(ap, int);
- va_end(ap);
}
#ifdef O_CLOEXEC
@@ -342,21 +346,57 @@ int qemu_open(const char *name, int flags, ...)
}
#endif
+ if (ret == -1) {
+ const char *action = "open";
+ if (flags & O_CREAT) {
+ action = "create";
+ }
#ifdef O_DIRECT
- if (ret == -1 && errno == EINVAL && (flags & O_DIRECT)) {
- int newflags = flags & ~O_DIRECT;
- ret = open(name, newflags, mode);
- if (ret != -1) {
- close(ret);
- error_report("file system does not support O_DIRECT");
- errno = EINVAL;
+ if (errno == EINVAL && (flags & O_DIRECT)) {
+ int newflags = flags & ~O_DIRECT;
+ ret = open(name, newflags, mode);
+ if (ret != -1) {
+ close(ret);
+ error_setg(errp, "Could not %s '%s' flags 0x%x: "
+ "filesystem does not support O_DIRECT",
+ action, name, flags);
+ errno = EINVAL;
+ return -1;
+ }
}
- }
#endif /* O_DIRECT */
+ error_setg_errno(errp, errno, "Could not %s '%s' flags 0x%x",
+ action, name, flags);
+ }
+
return ret;
}
+int qemu_open_err(const char *name, int flags, Error **errp, ...)
+{
+ va_list ap;
+ int rv;
+
+ va_start(ap, errp);
+ rv = qemu_openv(name, flags, errp, ap);
+ va_end(ap);
+
+ return rv;
+}
+
+int qemu_open(const char *name, int flags, ...)
+{
+ va_list ap;
+ int rv;
+
+ va_start(ap, flags);
+ rv = qemu_openv(name, flags, NULL, ap);
+ va_end(ap);
+
+ return rv;
+}
+
int qemu_close(int fd)
{
int64_t fdset_id;
--
2.26.2
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v2 3/3] block: switch to use qemu_open_err for improved errors
2020-07-02 12:56 [PATCH v2 0/3] block: improve error reporting for unsupported O_DIRECT Daniel P. Berrangé
2020-07-02 12:56 ` [PATCH v2 1/3] util: validate whether O_DIRECT is supported after failure Daniel P. Berrangé
2020-07-02 12:56 ` [PATCH v2 2/3] util: support detailed error reporting for qemu_open Daniel P. Berrangé
@ 2020-07-02 12:56 ` Daniel P. Berrangé
2020-07-08 6:57 ` Markus Armbruster
2 siblings, 1 reply; 8+ messages in thread
From: Daniel P. Berrangé @ 2020-07-02 12:56 UTC (permalink / raw)
To: qemu-devel
Cc: Kevin Wolf, Daniel P. Berrangé,
qemu-block, Markus Armbruster, Philippe Mathieu-Daudé,
P J P, Max Reitz
Currently at startup if using cache=none on a filesystem lacking
O_DIRECT such as tmpfs, at startup QEMU prints
qemu-system-x86_64: -drive file=/tmp/foo.img,cache=none: file system may not support O_DIRECT
qemu-system-x86_64: -drive file=/tmp/foo.img,cache=none: Could not open '/tmp/foo.img': Invalid argument
while at QMP level the hint is missing, so QEMU reports just
"error": {
"class": "GenericError",
"desc": "Could not open '/tmp/foo.img': Invalid argument"
}
which is close to useless for the end user trying to figure out what
they did wrong
With this change at startup QEMU prints
qemu-system-x86_64: -drive file=/tmp/foo.img,cache=none: Unable to open '/tmp/foo.img' flags 0x4000: filesystem does not support O_DIRECT
while at the QMP level QEMU reports a massively more informative
"error": {
"class": "GenericError",
"desc": "Unable to open '/tmp/foo.img' flags 0x4002: filesystem does not support O_DIRECT"
}
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
---
block/file-posix.c | 10 ++++------
tests/qemu-iotests/051.out | 4 ++--
tests/qemu-iotests/051.pc.out | 4 ++--
tests/qemu-iotests/061.out | 2 +-
tests/qemu-iotests/069.out | 2 +-
tests/qemu-iotests/082.out | 4 ++--
tests/qemu-iotests/111.out | 2 +-
tests/qemu-iotests/226.out | 6 +++---
tests/qemu-iotests/232.out | 12 ++++++------
tests/qemu-iotests/244.out | 6 +++---
10 files changed, 25 insertions(+), 27 deletions(-)
diff --git a/block/file-posix.c b/block/file-posix.c
index 3ab8f5a0fa..2865b789fb 100644
--- a/block/file-posix.c
+++ b/block/file-posix.c
@@ -574,11 +574,10 @@ static int raw_open_common(BlockDriverState *bs, QDict *options,
raw_parse_flags(bdrv_flags, &s->open_flags, false);
s->fd = -1;
- fd = qemu_open(filename, s->open_flags, 0644);
+ fd = qemu_open_err(filename, s->open_flags, errp, 0644);
ret = fd < 0 ? -errno : 0;
if (ret < 0) {
- error_setg_file_open(errp, -ret, filename);
if (ret == -EROFS) {
ret = -EACCES;
}
@@ -970,9 +969,8 @@ static int raw_reconfigure_getfd(BlockDriverState *bs, int flags,
ret = raw_normalize_devicepath(&normalized_filename, errp);
if (ret >= 0) {
assert(!(*open_flags & O_CREAT));
- fd = qemu_open(normalized_filename, *open_flags);
+ fd = qemu_open_err(normalized_filename, *open_flags, errp);
if (fd == -1) {
- error_setg_errno(errp, errno, "Could not reopen file");
return -1;
}
}
@@ -2324,10 +2322,10 @@ raw_co_create(BlockdevCreateOptions *options, Error **errp)
}
/* Create file */
- fd = qemu_open(file_opts->filename, O_RDWR | O_CREAT | O_BINARY, 0644);
+ fd = qemu_open_err(file_opts->filename, O_RDWR | O_CREAT | O_BINARY,
+ errp, 0644);
if (fd < 0) {
result = -errno;
- error_setg_errno(errp, -result, "Could not create file");
goto out;
}
diff --git a/tests/qemu-iotests/051.out b/tests/qemu-iotests/051.out
index 554c5ca90a..1a80eac0ce 100644
--- a/tests/qemu-iotests/051.out
+++ b/tests/qemu-iotests/051.out
@@ -363,7 +363,7 @@ Testing: -drive file=foo:bar
QEMU_PROG: -drive file=foo:bar: Unknown protocol 'foo'
Testing: -drive file.filename=foo:bar
-QEMU_PROG: -drive file.filename=foo:bar: Could not open 'foo:bar': No such file or directory
+QEMU_PROG: -drive file.filename=foo:bar: Could not open 'foo:bar' flags 0x08000: No such file or directory
Testing: -hda file:TEST_DIR/t.qcow2
QEMU X.Y.Z monitor - type 'help' for more information
@@ -374,7 +374,7 @@ QEMU X.Y.Z monitor - type 'help' for more information
(qemu) quit
Testing: -drive file.filename=file:TEST_DIR/t.qcow2
-QEMU_PROG: -drive file.filename=file:TEST_DIR/t.qcow2: Could not open 'file:TEST_DIR/t.qcow2': No such file or directory
+QEMU_PROG: -drive file.filename=file:TEST_DIR/t.qcow2: Could not open 'file:TEST_DIR/t.qcow2' flags 0x80000: No such file or directory
=== Snapshot mode ===
diff --git a/tests/qemu-iotests/051.pc.out b/tests/qemu-iotests/051.pc.out
index 0ea80d35f0..bf8f96287b 100644
--- a/tests/qemu-iotests/051.pc.out
+++ b/tests/qemu-iotests/051.pc.out
@@ -463,7 +463,7 @@ Testing: -drive file=foo:bar
QEMU_PROG: -drive file=foo:bar: Unknown protocol 'foo'
Testing: -drive file.filename=foo:bar
-QEMU_PROG: -drive file.filename=foo:bar: Could not open 'foo:bar': No such file or directory
+QEMU_PROG: -drive file.filename=foo:bar: Could not open 'foo:bar' flags 0x80000: No such file or directory
Testing: -hda file:TEST_DIR/t.qcow2
QEMU X.Y.Z monitor - type 'help' for more information
@@ -474,7 +474,7 @@ QEMU X.Y.Z monitor - type 'help' for more information
(qemu) quit
Testing: -drive file.filename=file:TEST_DIR/t.qcow2
-QEMU_PROG: -drive file.filename=file:TEST_DIR/t.qcow2: Could not open 'file:TEST_DIR/t.qcow2': No such file or directory
+QEMU_PROG: -drive file.filename=file:TEST_DIR/t.qcow2: Could not open 'file:TEST_DIR/t.qcow2' flags 0x80000: No such file or directory
=== Snapshot mode ===
diff --git a/tests/qemu-iotests/061.out b/tests/qemu-iotests/061.out
index 2f03cf045c..b4bc1f3112 100644
--- a/tests/qemu-iotests/061.out
+++ b/tests/qemu-iotests/061.out
@@ -533,7 +533,7 @@ Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
qemu-img: data-file can only be set for images that use an external data file
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864 data_file=TEST_DIR/t.IMGFMT.data
-qemu-img: Could not open 'TEST_DIR/t.IMGFMT': Could not open 'foo': No such file or directory
+qemu-img: Could not open 'TEST_DIR/t.IMGFMT': Could not open 'foo' flags 0x80000: No such file or directory
image: TEST_DIR/t.IMGFMT
file format: IMGFMT
virtual size: 64 MiB (67108864 bytes)
diff --git a/tests/qemu-iotests/069.out b/tests/qemu-iotests/069.out
index c78e8c2b72..60da51f7da 100644
--- a/tests/qemu-iotests/069.out
+++ b/tests/qemu-iotests/069.out
@@ -4,5 +4,5 @@ QA output created by 069
Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=131072
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=131072 backing_file=TEST_DIR/t.IMGFMT.base
-qemu-io: can't open device TEST_DIR/t.IMGFMT: Could not open backing file: Could not open 'TEST_DIR/t.IMGFMT.base': No such file or directory
+qemu-io: can't open device TEST_DIR/t.IMGFMT: Could not open backing file: Could not open 'TEST_DIR/t.IMGFMT.base' flags 0x80000: No such file or directory
*** done
diff --git a/tests/qemu-iotests/082.out b/tests/qemu-iotests/082.out
index 529a1214e1..7e57235183 100644
--- a/tests/qemu-iotests/082.out
+++ b/tests/qemu-iotests/082.out
@@ -528,10 +528,10 @@ Supported options:
size=<size> - Virtual disk size
Testing: convert -O qcow2 -o backing_file=TEST_DIR/t.qcow2,,help TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.base
-qemu-img: Could not open 'TEST_DIR/t.qcow2.base': Could not open backing file: Could not open 'TEST_DIR/t.qcow2,help': No such file or directory
+qemu-img: Could not open 'TEST_DIR/t.qcow2.base': Could not open backing file: Could not open 'TEST_DIR/t.qcow2,help' flags 0x80000: No such file or directory
Testing: convert -O qcow2 -o backing_file=TEST_DIR/t.qcow2,,? TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.base
-qemu-img: Could not open 'TEST_DIR/t.qcow2.base': Could not open backing file: Could not open 'TEST_DIR/t.qcow2,?': No such file or directory
+qemu-img: Could not open 'TEST_DIR/t.qcow2.base': Could not open backing file: Could not open 'TEST_DIR/t.qcow2,?' flags 0x80000: No such file or directory
Testing: convert -O qcow2 -o backing_file=TEST_DIR/t.qcow2, -o help TEST_DIR/t.qcow2 TEST_DIR/t.qcow2.base
qemu-img: Invalid option list: backing_file=TEST_DIR/t.qcow2,
diff --git a/tests/qemu-iotests/111.out b/tests/qemu-iotests/111.out
index 5279c462fc..f25f6bf573 100644
--- a/tests/qemu-iotests/111.out
+++ b/tests/qemu-iotests/111.out
@@ -1,4 +1,4 @@
QA output created by 111
-qemu-img: TEST_DIR/t.IMGFMT: Could not open 'TEST_DIR/t.IMGFMT.inexistent': No such file or directory
+qemu-img: TEST_DIR/t.IMGFMT: Could not open 'TEST_DIR/t.IMGFMT.inexistent' flags 0x80000: No such file or directory
Could not open backing image to determine size.
*** done
diff --git a/tests/qemu-iotests/226.out b/tests/qemu-iotests/226.out
index 42be973ff2..353fc4c799 100644
--- a/tests/qemu-iotests/226.out
+++ b/tests/qemu-iotests/226.out
@@ -6,7 +6,7 @@ QA output created by 226
qemu-io: can't open: A regular file was expected by the 'file' driver, but something else was given
qemu-io: warning: Opening a character device as a file using the 'file' driver is deprecated
== Testing RW ==
-qemu-io: can't open: Could not open 'TEST_DIR/t.IMGFMT': Is a directory
+qemu-io: can't open: Could not open 'TEST_DIR/t.IMGFMT' flags 0x80002: Is a directory
qemu-io: warning: Opening a character device as a file using the 'file' driver is deprecated
=== Testing with driver:host_device ===
@@ -14,13 +14,13 @@ qemu-io: warning: Opening a character device as a file using the 'file' driver i
== Testing RO ==
qemu-io: can't open: 'host_device' driver expects either a character or block device
== Testing RW ==
-qemu-io: can't open: Could not open 'TEST_DIR/t.IMGFMT': Is a directory
+qemu-io: can't open: Could not open 'TEST_DIR/t.IMGFMT' flags 0x80002: Is a directory
=== Testing with driver:host_cdrom ===
== Testing RO ==
qemu-io: can't open: 'host_cdrom' driver expects either a character or block device
== Testing RW ==
-qemu-io: can't open: Could not open 'TEST_DIR/t.IMGFMT': Is a directory
+qemu-io: can't open: Could not open 'TEST_DIR/t.IMGFMT' flags 0x80802: Is a directory
*** done
diff --git a/tests/qemu-iotests/232.out b/tests/qemu-iotests/232.out
index 3bd1a920af..bfa3f20172 100644
--- a/tests/qemu-iotests/232.out
+++ b/tests/qemu-iotests/232.out
@@ -21,11 +21,11 @@ NODE_NAME: TEST_DIR/t.IMGFMT (file, read-only)
NODE_NAME: TEST_DIR/t.IMGFMT (file, read-only)
NODE_NAME: TEST_DIR/t.IMGFMT (file, read-only)
-QEMU_PROG: -drive driver=file,file=TEST_DIR/t.IMGFMT,if=none,read-only=off,auto-read-only=off: Could not open 'TEST_DIR/t.IMGFMT': Permission denied
+QEMU_PROG: -drive driver=file,file=TEST_DIR/t.IMGFMT,if=none,read-only=off,auto-read-only=off: Could not open 'TEST_DIR/t.IMGFMT' flags 0x80002: Permission denied
NODE_NAME: TEST_DIR/t.IMGFMT (file)
NODE_NAME: TEST_DIR/t.IMGFMT (file)
-QEMU_PROG: -drive driver=file,file=TEST_DIR/t.IMGFMT,if=none,auto-read-only=off: Could not open 'TEST_DIR/t.IMGFMT': Permission denied
+QEMU_PROG: -drive driver=file,file=TEST_DIR/t.IMGFMT,if=none,auto-read-only=off: Could not open 'TEST_DIR/t.IMGFMT' flags 0x80002: Permission denied
NODE_NAME: TEST_DIR/t.IMGFMT (file)
NODE_NAME: TEST_DIR/t.IMGFMT (file)
@@ -49,11 +49,11 @@ node0: TEST_DIR/t.IMGFMT (file, read-only)
node0: TEST_DIR/t.IMGFMT (file, read-only)
node0: TEST_DIR/t.IMGFMT (file, read-only)
-QEMU_PROG: -blockdev driver=file,filename=TEST_DIR/t.IMGFMT,node-name=node0,read-only=off,auto-read-only=off: Could not open 'TEST_DIR/t.IMGFMT': Permission denied
+QEMU_PROG: -blockdev driver=file,filename=TEST_DIR/t.IMGFMT,node-name=node0,read-only=off,auto-read-only=off: Could not open 'TEST_DIR/t.IMGFMT' flags 0x80002: Permission denied
node0: TEST_DIR/t.IMGFMT (file)
-QEMU_PROG: -blockdev driver=file,filename=TEST_DIR/t.IMGFMT,node-name=node0,read-only=off: Could not open 'TEST_DIR/t.IMGFMT': Permission denied
+QEMU_PROG: -blockdev driver=file,filename=TEST_DIR/t.IMGFMT,node-name=node0,read-only=off: Could not open 'TEST_DIR/t.IMGFMT' flags 0x80002: Permission denied
-QEMU_PROG: -blockdev driver=file,filename=TEST_DIR/t.IMGFMT,node-name=node0,auto-read-only=off: Could not open 'TEST_DIR/t.IMGFMT': Permission denied
+QEMU_PROG: -blockdev driver=file,filename=TEST_DIR/t.IMGFMT,node-name=node0,auto-read-only=off: Could not open 'TEST_DIR/t.IMGFMT' flags 0x80002: Permission denied
node0: TEST_DIR/t.IMGFMT (file)
-QEMU_PROG: -blockdev driver=file,filename=TEST_DIR/t.IMGFMT,node-name=node0: Could not open 'TEST_DIR/t.IMGFMT': Permission denied
+QEMU_PROG: -blockdev driver=file,filename=TEST_DIR/t.IMGFMT,node-name=node0: Could not open 'TEST_DIR/t.IMGFMT' flags 0x80002: Permission denied
*** done
diff --git a/tests/qemu-iotests/244.out b/tests/qemu-iotests/244.out
index dbab7359a9..34daec97f2 100644
--- a/tests/qemu-iotests/244.out
+++ b/tests/qemu-iotests/244.out
@@ -9,7 +9,7 @@ read 65536/65536 bytes at offset 0
64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
read 65536/65536 bytes at offset 0
64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-qemu-io: can't open device TEST_DIR/t.qcow2: Could not open 'inexistent': No such file or directory
+qemu-io: can't open device TEST_DIR/t.qcow2: Could not open 'inexistent' flags 0x80002: No such file or directory
no file open, try 'help open'
Data file required, but without data file name in the image:
@@ -17,14 +17,14 @@ qemu-io: can't open device TEST_DIR/t.qcow2: 'data-file' is required for this im
no file open, try 'help open'
read 65536/65536 bytes at offset 0
64 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-qemu-io: can't open device TEST_DIR/t.qcow2: Could not open 'inexistent': No such file or directory
+qemu-io: can't open device TEST_DIR/t.qcow2: Could not open 'inexistent' flags 0x80002: No such file or directory
no file open, try 'help open'
Setting data-file for an image with internal data:
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=67108864
qemu-io: can't open device TEST_DIR/t.qcow2: 'data-file' can only be set for images with an external data file
no file open, try 'help open'
-qemu-io: can't open device TEST_DIR/t.qcow2: Could not open 'inexistent': No such file or directory
+qemu-io: can't open device TEST_DIR/t.qcow2: Could not open 'inexistent' flags 0x80002: No such file or directory
no file open, try 'help open'
=== Conflicting features ===
--
2.26.2
^ permalink raw reply related [flat|nested] 8+ messages in thread