[PATCH] ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v5)

[PATCH] ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v5)

[Eric Anholt]

Raspbian and Fedora have decided to support the Pi3 in 32-bit mode for
now, so it's useful to be able to test that mode on an upstream
kernel.  It's also been useful for me to use the same board for 32-bit
and 64-bit development.

Signed-off-by: Eric Anholt <eric@anholt.net>
---
 arch/arm/boot/dts/Makefile            | 1 +
 arch/arm/boot/dts/bcm2837-rpi-3.b.dts | 1 +
 2 files changed, 2 insertions(+)
 create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3.b.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 011808490fed..eded842d9978 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
 	bcm2835-rpi-b-plus.dtb \
 	bcm2835-rpi-a-plus.dtb \
 	bcm2836-rpi-2-b.dtb \
+	bcm2837-rpi-3-b.dtb \
 	bcm2835-rpi-zero.dtb
 dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm4708-asus-rt-ac56u.dtb \
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3.b.dts b/arch/arm/boot/dts/bcm2837-rpi-3.b.dts
new file mode 100644
index 000000000000..8c8aa4d1e9b3
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837-rpi-3.b.dts
@@ -0,0 +1 @@
+#include "arm64/broadcom/bcm2837-rpi-3.b.dts"
-- 
2.11.0

[PATCH] ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v5)

[Eric Anholt]

Raspbian and Fedora have decided to support the Pi3 in 32-bit mode for
now, so it's useful to be able to test that mode on an upstream
kernel.  It's also been useful for me to use the same board for 32-bit
and 64-bit development.

Signed-off-by: Eric Anholt <eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>
---
 arch/arm/boot/dts/Makefile            | 1 +
 arch/arm/boot/dts/bcm2837-rpi-3.b.dts | 1 +
 2 files changed, 2 insertions(+)
 create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3.b.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 011808490fed..eded842d9978 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
 	bcm2835-rpi-b-plus.dtb \
 	bcm2835-rpi-a-plus.dtb \
 	bcm2836-rpi-2-b.dtb \
+	bcm2837-rpi-3-b.dtb \
 	bcm2835-rpi-zero.dtb
 dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm4708-asus-rt-ac56u.dtb \
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3.b.dts b/arch/arm/boot/dts/bcm2837-rpi-3.b.dts
new file mode 100644
index 000000000000..8c8aa4d1e9b3
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837-rpi-3.b.dts
@@ -0,0 +1 @@
+#include "arm64/broadcom/bcm2837-rpi-3.b.dts"
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH] ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v5)

[Eric Anholt]

Raspbian and Fedora have decided to support the Pi3 in 32-bit mode for
now, so it's useful to be able to test that mode on an upstream
kernel.  It's also been useful for me to use the same board for 32-bit
and 64-bit development.

Signed-off-by: Eric Anholt <eric@anholt.net>
---
 arch/arm/boot/dts/Makefile            | 1 +
 arch/arm/boot/dts/bcm2837-rpi-3.b.dts | 1 +
 2 files changed, 2 insertions(+)
 create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3.b.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 011808490fed..eded842d9978 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
 	bcm2835-rpi-b-plus.dtb \
 	bcm2835-rpi-a-plus.dtb \
 	bcm2836-rpi-2-b.dtb \
+	bcm2837-rpi-3-b.dtb \
 	bcm2835-rpi-zero.dtb
 dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm4708-asus-rt-ac56u.dtb \
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3.b.dts b/arch/arm/boot/dts/bcm2837-rpi-3.b.dts
new file mode 100644
index 000000000000..8c8aa4d1e9b3
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837-rpi-3.b.dts
@@ -0,0 +1 @@
+#include "arm64/broadcom/bcm2837-rpi-3.b.dts"
-- 
2.11.0

Re: [PATCH] ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v5)

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 1321 bytes --]

Hi Eric,

[auto build test ERROR on robh/for-next]
[also build test ERROR on v4.11-rc8 next-20170424]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Eric-Anholt/ARM-dts-Add-devicetree-for-the-Raspberry-Pi-3-for-arm32-v5/20170425-063618
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
config: arm-at91_dt_defconfig (attached as .config)
compiler: arm-linux-gnueabi-gcc (Debian 6.1.1-9) 6.1.1 20160705
reproduce:
        wget https://raw.githubusercontent.com/01org/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=arm 

All errors (new ones prefixed by >>):

>> arch/arm/boot/dts/bcm2837-rpi-3.b.dts:1:46: fatal error: arm64/broadcom/bcm2837-rpi-3.b.dts: No such file or directory
    #include "arm64/broadcom/bcm2837-rpi-3.b.dts"
                                                 ^
   compilation terminated.

vim +1 arch/arm/boot/dts/bcm2837-rpi-3.b.dts

   > 1	#include "arm64/broadcom/bcm2837-rpi-3.b.dts"

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 22403 bytes --]

Re: [PATCH] ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v5)

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 1321 bytes --]

Hi Eric,

[auto build test ERROR on robh/for-next]
[also build test ERROR on v4.11-rc8 next-20170424]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Eric-Anholt/ARM-dts-Add-devicetree-for-the-Raspberry-Pi-3-for-arm32-v5/20170425-063618
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
config: arm-at91_dt_defconfig (attached as .config)
compiler: arm-linux-gnueabi-gcc (Debian 6.1.1-9) 6.1.1 20160705
reproduce:
        wget https://raw.githubusercontent.com/01org/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=arm 

All errors (new ones prefixed by >>):

>> arch/arm/boot/dts/bcm2837-rpi-3.b.dts:1:46: fatal error: arm64/broadcom/bcm2837-rpi-3.b.dts: No such file or directory
    #include "arm64/broadcom/bcm2837-rpi-3.b.dts"
                                                 ^
   compilation terminated.

vim +1 arch/arm/boot/dts/bcm2837-rpi-3.b.dts

   > 1	#include "arm64/broadcom/bcm2837-rpi-3.b.dts"

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 22403 bytes --]

[PATCH] ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v5)

[kbuild test robot]

Hi Eric,

[auto build test ERROR on robh/for-next]
[also build test ERROR on v4.11-rc8 next-20170424]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Eric-Anholt/ARM-dts-Add-devicetree-for-the-Raspberry-Pi-3-for-arm32-v5/20170425-063618
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
config: arm-at91_dt_defconfig (attached as .config)
compiler: arm-linux-gnueabi-gcc (Debian 6.1.1-9) 6.1.1 20160705
reproduce:
        wget https://raw.githubusercontent.com/01org/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=arm 

All errors (new ones prefixed by >>):

>> arch/arm/boot/dts/bcm2837-rpi-3.b.dts:1:46: fatal error: arm64/broadcom/bcm2837-rpi-3.b.dts: No such file or directory
    #include "arm64/broadcom/bcm2837-rpi-3.b.dts"
                                                 ^
   compilation terminated.

vim +1 arch/arm/boot/dts/bcm2837-rpi-3.b.dts

   > 1	#include "arm64/broadcom/bcm2837-rpi-3.b.dts"

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation
-------------- next part --------------
A non-text attachment was scrubbed...
Name: .config.gz
Type: application/gzip
Size: 22403 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170425/f816bce5/attachment-0001.gz>

Re: [PATCH] ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v5)

[Florian Fainelli]

On 04/24/2017 01:00 PM, Eric Anholt wrote:
> Raspbian and Fedora have decided to support the Pi3 in 32-bit mode for
> now, so it's useful to be able to test that mode on an upstream
> kernel.  It's also been useful for me to use the same board for 32-bit
> and 64-bit development.
> 
> Signed-off-by: Eric Anholt <eric@anholt.net>
> ---
>  arch/arm/boot/dts/Makefile            | 1 +
>  arch/arm/boot/dts/bcm2837-rpi-3.b.dts | 1 +
>  2 files changed, 2 insertions(+)
>  create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3.b.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 011808490fed..eded842d9978 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
>  	bcm2835-rpi-b-plus.dtb \
>  	bcm2835-rpi-a-plus.dtb \
>  	bcm2836-rpi-2-b.dtb \
> +	bcm2837-rpi-3-b.dtb \
>  	bcm2835-rpi-zero.dtb
>  dtb-$(CONFIG_ARCH_BCM_5301X) += \
>  	bcm4708-asus-rt-ac56u.dtb \
> diff --git a/arch/arm/boot/dts/bcm2837-rpi-3.b.dts b/arch/arm/boot/dts/bcm2837-rpi-3.b.dts
> new file mode 100644
> index 000000000000..8c8aa4d1e9b3
> --- /dev/null
> +++ b/arch/arm/boot/dts/bcm2837-rpi-3.b.dts
> @@ -0,0 +1 @@
> +#include "arm64/broadcom/bcm2837-rpi-3.b.dts"

Sounds like this should be
../arm64/boot/dts/broadcom/bcm2837-rpi-3.b.dts are reported by the
kbuild test robot?
-- 
Florian

Re: [PATCH] ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v5)

[Florian Fainelli]

On 04/24/2017 01:00 PM, Eric Anholt wrote:
> Raspbian and Fedora have decided to support the Pi3 in 32-bit mode for
> now, so it's useful to be able to test that mode on an upstream
> kernel.  It's also been useful for me to use the same board for 32-bit
> and 64-bit development.
> 
> Signed-off-by: Eric Anholt <eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>
> ---
>  arch/arm/boot/dts/Makefile            | 1 +
>  arch/arm/boot/dts/bcm2837-rpi-3.b.dts | 1 +
>  2 files changed, 2 insertions(+)
>  create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3.b.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 011808490fed..eded842d9978 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
>  	bcm2835-rpi-b-plus.dtb \
>  	bcm2835-rpi-a-plus.dtb \
>  	bcm2836-rpi-2-b.dtb \
> +	bcm2837-rpi-3-b.dtb \
>  	bcm2835-rpi-zero.dtb
>  dtb-$(CONFIG_ARCH_BCM_5301X) += \
>  	bcm4708-asus-rt-ac56u.dtb \
> diff --git a/arch/arm/boot/dts/bcm2837-rpi-3.b.dts b/arch/arm/boot/dts/bcm2837-rpi-3.b.dts
> new file mode 100644
> index 000000000000..8c8aa4d1e9b3
> --- /dev/null
> +++ b/arch/arm/boot/dts/bcm2837-rpi-3.b.dts
> @@ -0,0 +1 @@
> +#include "arm64/broadcom/bcm2837-rpi-3.b.dts"

Sounds like this should be
../arm64/boot/dts/broadcom/bcm2837-rpi-3.b.dts are reported by the
kbuild test robot?
-- 
Florian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH] ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v5)

[Florian Fainelli]

On 04/24/2017 01:00 PM, Eric Anholt wrote:
> Raspbian and Fedora have decided to support the Pi3 in 32-bit mode for
> now, so it's useful to be able to test that mode on an upstream
> kernel.  It's also been useful for me to use the same board for 32-bit
> and 64-bit development.
> 
> Signed-off-by: Eric Anholt <eric@anholt.net>
> ---
>  arch/arm/boot/dts/Makefile            | 1 +
>  arch/arm/boot/dts/bcm2837-rpi-3.b.dts | 1 +
>  2 files changed, 2 insertions(+)
>  create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3.b.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 011808490fed..eded842d9978 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
>  	bcm2835-rpi-b-plus.dtb \
>  	bcm2835-rpi-a-plus.dtb \
>  	bcm2836-rpi-2-b.dtb \
> +	bcm2837-rpi-3-b.dtb \
>  	bcm2835-rpi-zero.dtb
>  dtb-$(CONFIG_ARCH_BCM_5301X) += \
>  	bcm4708-asus-rt-ac56u.dtb \
> diff --git a/arch/arm/boot/dts/bcm2837-rpi-3.b.dts b/arch/arm/boot/dts/bcm2837-rpi-3.b.dts
> new file mode 100644
> index 000000000000..8c8aa4d1e9b3
> --- /dev/null
> +++ b/arch/arm/boot/dts/bcm2837-rpi-3.b.dts
> @@ -0,0 +1 @@
> +#include "arm64/broadcom/bcm2837-rpi-3.b.dts"

Sounds like this should be
../arm64/boot/dts/broadcom/bcm2837-rpi-3.b.dts are reported by the
kbuild test robot?
-- 
Florian

Re: [PATCH] ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v5)

[Stefan Wahren]

Am 24.04.2017 um 22:00 schrieb Eric Anholt:
> Raspbian and Fedora have decided to support the Pi3 in 32-bit mode for
> now, so it's useful to be able to test that mode on an upstream
> kernel.  It's also been useful for me to use the same board for 32-bit
> and 64-bit development.
>
> Signed-off-by: Eric Anholt <eric@anholt.net>
> ---
>  arch/arm/boot/dts/Makefile            | 1 +
>  arch/arm/boot/dts/bcm2837-rpi-3.b.dts | 1 +
>  2 files changed, 2 insertions(+)
>  create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3.b.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 011808490fed..eded842d9978 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
>  	bcm2835-rpi-b-plus.dtb \
>  	bcm2835-rpi-a-plus.dtb \
>  	bcm2836-rpi-2-b.dtb \
> +	bcm2837-rpi-3-b.dtb \
>  	bcm2835-rpi-zero.dtb
>  dtb-$(CONFIG_ARCH_BCM_5301X) += \
>  	bcm4708-asus-rt-ac56u.dtb \
> diff --git a/arch/arm/boot/dts/bcm2837-rpi-3.b.dts b/arch/arm/boot/dts/bcm2837-rpi-3.b.dts
> new file mode 100644
> index 000000000000..8c8aa4d1e9b3
> --- /dev/null
> +++ b/arch/arm/boot/dts/bcm2837-rpi-3.b.dts
> @@ -0,0 +1 @@
> +#include "arm64/broadcom/bcm2837-rpi-3.b.dts"

Looks like a typo in the dts filename and in the include ( dot instead
of dash ).

Re: [PATCH] ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v5)

[Stefan Wahren]

Am 24.04.2017 um 22:00 schrieb Eric Anholt:
> Raspbian and Fedora have decided to support the Pi3 in 32-bit mode for
> now, so it's useful to be able to test that mode on an upstream
> kernel.  It's also been useful for me to use the same board for 32-bit
> and 64-bit development.
>
> Signed-off-by: Eric Anholt <eric@anholt.net>
> ---
>  arch/arm/boot/dts/Makefile            | 1 +
>  arch/arm/boot/dts/bcm2837-rpi-3.b.dts | 1 +
>  2 files changed, 2 insertions(+)
>  create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3.b.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 011808490fed..eded842d9978 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
>  	bcm2835-rpi-b-plus.dtb \
>  	bcm2835-rpi-a-plus.dtb \
>  	bcm2836-rpi-2-b.dtb \
> +	bcm2837-rpi-3-b.dtb \
>  	bcm2835-rpi-zero.dtb
>  dtb-$(CONFIG_ARCH_BCM_5301X) += \
>  	bcm4708-asus-rt-ac56u.dtb \
> diff --git a/arch/arm/boot/dts/bcm2837-rpi-3.b.dts b/arch/arm/boot/dts/bcm2837-rpi-3.b.dts
> new file mode 100644
> index 000000000000..8c8aa4d1e9b3
> --- /dev/null
> +++ b/arch/arm/boot/dts/bcm2837-rpi-3.b.dts
> @@ -0,0 +1 @@
> +#include "arm64/broadcom/bcm2837-rpi-3.b.dts"

Looks like a typo in the dts filename and in the include ( dot instead
of dash ).

[PATCH] ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v5)

[Stefan Wahren]

Am 24.04.2017 um 22:00 schrieb Eric Anholt:
> Raspbian and Fedora have decided to support the Pi3 in 32-bit mode for
> now, so it's useful to be able to test that mode on an upstream
> kernel.  It's also been useful for me to use the same board for 32-bit
> and 64-bit development.
>
> Signed-off-by: Eric Anholt <eric@anholt.net>
> ---
>  arch/arm/boot/dts/Makefile            | 1 +
>  arch/arm/boot/dts/bcm2837-rpi-3.b.dts | 1 +
>  2 files changed, 2 insertions(+)
>  create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3.b.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 011808490fed..eded842d9978 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
>  	bcm2835-rpi-b-plus.dtb \
>  	bcm2835-rpi-a-plus.dtb \
>  	bcm2836-rpi-2-b.dtb \
> +	bcm2837-rpi-3-b.dtb \
>  	bcm2835-rpi-zero.dtb
>  dtb-$(CONFIG_ARCH_BCM_5301X) += \
>  	bcm4708-asus-rt-ac56u.dtb \
> diff --git a/arch/arm/boot/dts/bcm2837-rpi-3.b.dts b/arch/arm/boot/dts/bcm2837-rpi-3.b.dts
> new file mode 100644
> index 000000000000..8c8aa4d1e9b3
> --- /dev/null
> +++ b/arch/arm/boot/dts/bcm2837-rpi-3.b.dts
> @@ -0,0 +1 @@
> +#include "arm64/broadcom/bcm2837-rpi-3.b.dts"

Looks like a typo in the dts filename and in the include ( dot instead
of dash ).

Re: [PATCH] ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v5)

[Eric Anholt]

[-- Attachment #1: Type: text/plain, Size: 1576 bytes --]

Stefan Wahren <stefan.wahren@i2se.com> writes:

> Am 24.04.2017 um 22:00 schrieb Eric Anholt:
>> Raspbian and Fedora have decided to support the Pi3 in 32-bit mode for
>> now, so it's useful to be able to test that mode on an upstream
>> kernel.  It's also been useful for me to use the same board for 32-bit
>> and 64-bit development.
>>
>> Signed-off-by: Eric Anholt <eric@anholt.net>
>> ---
>>  arch/arm/boot/dts/Makefile            | 1 +
>>  arch/arm/boot/dts/bcm2837-rpi-3.b.dts | 1 +
>>  2 files changed, 2 insertions(+)
>>  create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3.b.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 011808490fed..eded842d9978 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
>>  	bcm2835-rpi-b-plus.dtb \
>>  	bcm2835-rpi-a-plus.dtb \
>>  	bcm2836-rpi-2-b.dtb \
>> +	bcm2837-rpi-3-b.dtb \
>>  	bcm2835-rpi-zero.dtb
>>  dtb-$(CONFIG_ARCH_BCM_5301X) += \
>>  	bcm4708-asus-rt-ac56u.dtb \
>> diff --git a/arch/arm/boot/dts/bcm2837-rpi-3.b.dts b/arch/arm/boot/dts/bcm2837-rpi-3.b.dts
>> new file mode 100644
>> index 000000000000..8c8aa4d1e9b3
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/bcm2837-rpi-3.b.dts
>> @@ -0,0 +1 @@
>> +#include "arm64/broadcom/bcm2837-rpi-3.b.dts"
>
> Looks like a typo in the dts filename and in the include ( dot instead
> of dash ).

Sorry about that, everyone.  I remember doing builds of the patch, but
maybe things succeeded because there was already a .dtb present in my
tree or something.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]

Re: [PATCH] ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v5)

[Eric Anholt]

[-- Attachment #1: Type: text/plain, Size: 1625 bytes --]

Stefan Wahren <stefan.wahren-eS4NqCHxEME@public.gmane.org> writes:

> Am 24.04.2017 um 22:00 schrieb Eric Anholt:
>> Raspbian and Fedora have decided to support the Pi3 in 32-bit mode for
>> now, so it's useful to be able to test that mode on an upstream
>> kernel.  It's also been useful for me to use the same board for 32-bit
>> and 64-bit development.
>>
>> Signed-off-by: Eric Anholt <eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>
>> ---
>>  arch/arm/boot/dts/Makefile            | 1 +
>>  arch/arm/boot/dts/bcm2837-rpi-3.b.dts | 1 +
>>  2 files changed, 2 insertions(+)
>>  create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3.b.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 011808490fed..eded842d9978 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
>>  	bcm2835-rpi-b-plus.dtb \
>>  	bcm2835-rpi-a-plus.dtb \
>>  	bcm2836-rpi-2-b.dtb \
>> +	bcm2837-rpi-3-b.dtb \
>>  	bcm2835-rpi-zero.dtb
>>  dtb-$(CONFIG_ARCH_BCM_5301X) += \
>>  	bcm4708-asus-rt-ac56u.dtb \
>> diff --git a/arch/arm/boot/dts/bcm2837-rpi-3.b.dts b/arch/arm/boot/dts/bcm2837-rpi-3.b.dts
>> new file mode 100644
>> index 000000000000..8c8aa4d1e9b3
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/bcm2837-rpi-3.b.dts
>> @@ -0,0 +1 @@
>> +#include "arm64/broadcom/bcm2837-rpi-3.b.dts"
>
> Looks like a typo in the dts filename and in the include ( dot instead
> of dash ).

Sorry about that, everyone.  I remember doing builds of the patch, but
maybe things succeeded because there was already a .dtb present in my
tree or something.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]

[PATCH] ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v5)

[Eric Anholt]

Stefan Wahren <stefan.wahren@i2se.com> writes:

> Am 24.04.2017 um 22:00 schrieb Eric Anholt:
>> Raspbian and Fedora have decided to support the Pi3 in 32-bit mode for
>> now, so it's useful to be able to test that mode on an upstream
>> kernel.  It's also been useful for me to use the same board for 32-bit
>> and 64-bit development.
>>
>> Signed-off-by: Eric Anholt <eric@anholt.net>
>> ---
>>  arch/arm/boot/dts/Makefile            | 1 +
>>  arch/arm/boot/dts/bcm2837-rpi-3.b.dts | 1 +
>>  2 files changed, 2 insertions(+)
>>  create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3.b.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 011808490fed..eded842d9978 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
>>  	bcm2835-rpi-b-plus.dtb \
>>  	bcm2835-rpi-a-plus.dtb \
>>  	bcm2836-rpi-2-b.dtb \
>> +	bcm2837-rpi-3-b.dtb \
>>  	bcm2835-rpi-zero.dtb
>>  dtb-$(CONFIG_ARCH_BCM_5301X) += \
>>  	bcm4708-asus-rt-ac56u.dtb \
>> diff --git a/arch/arm/boot/dts/bcm2837-rpi-3.b.dts b/arch/arm/boot/dts/bcm2837-rpi-3.b.dts
>> new file mode 100644
>> index 000000000000..8c8aa4d1e9b3
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/bcm2837-rpi-3.b.dts
>> @@ -0,0 +1 @@
>> +#include "arm64/broadcom/bcm2837-rpi-3.b.dts"
>
> Looks like a typo in the dts filename and in the include ( dot instead
> of dash ).

Sorry about that, everyone.  I remember doing builds of the patch, but
maybe things succeeded because there was already a .dtb present in my
tree or something.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 832 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170425/e8afe944/attachment.sig>