* [PATCH v9 0/7] enable hi3xxx SoC
@ 2013-08-28 13:10 Haojian Zhuang
2013-08-28 13:10 ` [PATCH v9 1/7] clk: hi3xxx: add clock support Haojian Zhuang
` (6 more replies)
0 siblings, 7 replies; 13+ messages in thread
From: Haojian Zhuang @ 2013-08-28 13:10 UTC (permalink / raw)
To: linux-arm-kernel
v9:
1. Clean code in DTS file according to Olof's comments.
2. Since debug ll patch is going through Russell's tree, remove it
from this patch set.
v8:
1. Drop to support CLK_GATE_SEPERATED_REG in common clock gate driver.
Support this feature in hi3xxx clock driver.
2. Clean unnecessary device node in DTS.
3. Define all clocks in hi3620-clk.dtsi. And all clock nodes are defined
in the clocks node.
4. Fix the clock gate & clock mux for timer.
5. Rename timer0~4 to dual_timer0~4 in DTS file. It's used to make
name clearer.
v7:
1. Add hi3xxx_defconfig.
2. Use reg property in clock node.
3. Drop origin clock divider table.
4. Reuse clock divider register helper.
5. Reuse clock gate register helper.
6. Append CLK_GATE_SEPERATED_REG flag in order to support Hisilicon
Hi3620 SoC.
7. Rebase DEBUG_LL for Hi3xxx.
8. Add more clock node in DTS file.
v6:
1. Remove hisilicon string from properties in clock driver.
2. Replace array by pointer in clock driver. Since only sctrl parent
node exists at this time.
v5:
1. Remove HIWORD clk patches since they're merged into clk git tree.
2. Set hisilicon,clk-reset property of clkgate node is optional.
3. Update on commandline args in DTS file. Remove earlyprintk, mem, nfs.
4. Move gpio-keys out of amba node in DTS file.
v4:
1. Add clk gate with HIWORD mask for Rockchip.
2. Update comments and code of HIWORD flags for mux/divider.
3. Append a mux without HIWORD mask in Hisilicon 3620.
4. Fix the pinmux setting in Hi4511.
v3:
1. Use clk_register_mux_table().
v2:
1. Reuse mux & divider driver. So append CLK_MUX_HIWORD_MASK &
CLK_DIVIDER_HIWORD_MASK for Hi3620 SoC.
2. Fix system timer running too fast because wrong divider is choosen.
3. Remove .init_irq in DT machine descriptor.
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v9 1/7] clk: hi3xxx: add clock support
2013-08-28 13:10 [PATCH v9 0/7] enable hi3xxx SoC Haojian Zhuang
@ 2013-08-28 13:10 ` Haojian Zhuang
2013-08-28 13:10 ` [PATCH v9 2/7] ARM: hi3xxx: add board support with device tree Haojian Zhuang
` (5 subsequent siblings)
6 siblings, 0 replies; 13+ messages in thread
From: Haojian Zhuang @ 2013-08-28 13:10 UTC (permalink / raw)
To: linux-arm-kernel
Add clock support with device tree on Hisilicon SoC.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Mike Turquette <mturquette@linaro.org>
---
.../devicetree/bindings/clock/hisilicon.txt | 118 +++++++++
drivers/clk/Makefile | 1 +
drivers/clk/hisilicon/Makefile | 2 +
drivers/clk/hisilicon/clk-hi3xxx.c | 272 +++++++++++++++++++++
drivers/clk/hisilicon/clk-hi3xxx.h | 34 +++
drivers/clk/hisilicon/clkgate-seperated.c | 129 ++++++++++
6 files changed, 556 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/hisilicon.txt
create mode 100644 drivers/clk/hisilicon/Makefile
create mode 100644 drivers/clk/hisilicon/clk-hi3xxx.c
create mode 100644 drivers/clk/hisilicon/clk-hi3xxx.h
create mode 100644 drivers/clk/hisilicon/clkgate-seperated.c
diff --git a/Documentation/devicetree/bindings/clock/hisilicon.txt b/Documentation/devicetree/bindings/clock/hisilicon.txt
new file mode 100644
index 0000000..2c42062
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/hisilicon.txt
@@ -0,0 +1,118 @@
+Device Tree Clock bindings for arch-hi3xxx
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+All the mux, gate & divider are in clock container of DTS file.
+
+Required properties for mux clocks:
+ - compatible : shall be "hisilicon,clk-mux".
+ - clocks : shall be the input parent clock phandle for the clock. This should
+ be the reference clock.
+ - clock-output-names : shall be reference name.
+ - #clock-cells : from common clock binding; shall be set to 0.
+ - reg : the mux register address. It should be the offset of the container.
+ - clkmux-mask : mask bits of the mux register.
+ - clkmux-table : array of mux select bits.
+
+Optional properties for mux clocks:
+ - clkmux-hiword-mask : indicates that the bit[31:16] are the hiword mask
+ of mux selected bits (bit[15:0]). The bit[15:0] is valid only when
+ bit[31:16] is set.
+
+
+
+Required properties for gate clocks:
+ - compatible : shall be "hisilicon,clk-gate".
+ - clocks : shall be the input parent clock phandle for the clock. This should
+ be the reference clock.
+ - clock-output-names : shall be reference name.
+ - #clock-cells : from common clock binding; shall be set to 0.
+ - reg : the mux register address. It should be the offset of the container.
+ - clkgate : bit index to control the clock gate in the gate register.
+
+Optional properties for gate clocks:
+ - clkgate-inverted : it indicates that setting 0 could enable the clock gate
+ and setting 1 could disable the clock gate.
+ - clkgate-seperated-reg : it indicates that there're three continuous
+ registers (enable, disable & status) for the same clock gate.
+
+
+
+Required properties for divider clocks:
+ - compatible : shall be "hisilicon,clk-div".
+ - clocks : shall be the input parent clock phandle for the clock. This should
+ be the reference clock.
+ - clock-output-names : shall be reference name.
+ - reg : the divider register address. It should be the offset of the
+ container.
+ - clkdiv-mask : mask bits of the divider register.
+ - clkdiv-min : the minimum divider of the clock divider.
+ - clkdiv-max : the maximum divider of the clock divider.
+
+Optional properties for divider clocks:
+ - clkdiv-hiword-mask : indicates that the bit[31:16] are the hiword mask
+ of divider selected bits (bit[15:0]). The bit[15:0] is valid only when
+ bit[31:16] is set.
+
+
+
+For example:
+ sysctrl: system-controller at fc802000 {
+ compatible = "hisilicon,sysctrl";
+ reg = <0xfc802000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+
+ timer0_mux: timer0_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk01>;
+ clock-output-names = "timer0_mux";
+ reg = <0>;
+ clkmux-mask = <0x8000>;
+ clkmux-table = <0 0x8000>;
+ };
+ uart0_mux: uart0_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &pclk>;
+ clock-output-names = "uart0_mux";
+ reg = <0x100>;
+ clkmux-mask = <0x80>;
+ /* each item value */
+ clkmux-table = <0 0x80>;
+ clkmux-hiword-mask;
+ };
+ timclk0: timclk0 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&timer0_mux>;
+ clock-output-names = "timclk0";
+ clkgate-inverted;
+ reg = <0>;
+ clkgate = <16>;
+ };
+ timerclk01: timerclk01 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&timer_rclk01>;
+ clock-output-names = "timerclk01";
+ reg = <0x20>;
+ clkgate = <0>;
+ clkgate-seperated-reg;
+ };
+ mmc1_div: mmc1_div {
+ compatible = "hisilicon,clk-div";
+ #clock-cells = <0>;
+ clocks = <&mmc1_mux>;
+ clock-output-names = "mmc1_div";
+ reg = <0x108>;
+ clkdiv-mask = <0x1e0>;
+ clkdiv-min = <1>;
+ clkdiv-max = <16>;
+ clkdiv-hiword-mask;
+ };
+ };
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 4038c2b..2a06b5c 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_COMMON_CLK) += clk-composite.o
# SoCs specific
obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o
obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o
+obj-$(CONFIG_ARCH_HI3xxx) += hisilicon/
obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o
obj-$(CONFIG_ARCH_NSPIRE) += clk-nspire.o
obj-$(CONFIG_ARCH_MXS) += mxs/
diff --git a/drivers/clk/hisilicon/Makefile b/drivers/clk/hisilicon/Makefile
new file mode 100644
index 0000000..1ed6a3c
--- /dev/null
+++ b/drivers/clk/hisilicon/Makefile
@@ -0,0 +1,2 @@
+
+obj-y += clk-hi3xxx.o clkgate-seperated.o
diff --git a/drivers/clk/hisilicon/clk-hi3xxx.c b/drivers/clk/hisilicon/clk-hi3xxx.c
new file mode 100644
index 0000000..87ae12b
--- /dev/null
+++ b/drivers/clk/hisilicon/clk-hi3xxx.c
@@ -0,0 +1,272 @@
+/*
+ * Hisilicon Hi3xxx clock driver
+ *
+ * Copyright (c) 2012-2013 Hisilicon Limited.
+ * Copyright (c) 2012-2013 Linaro Limited.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ * Xin Li <li.xin@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+
+#include "clk-hi3xxx.h"
+
+static void __iomem *hi3xxx_clk_base = NULL;
+
+static DEFINE_SPINLOCK(hi3xxx_clk_lock);
+
+static const struct of_device_id hi3xxx_of_match[] = {
+ { .compatible = "hisilicon,sysctrl" },
+};
+
+static void __iomem __init *hi3xxx_init_clocks(struct device_node *np)
+{
+ struct device_node *parent;
+ const struct of_device_id *match;
+ void __iomem *ret = NULL;
+
+ parent = of_get_parent(np);
+ if (!parent) {
+ pr_warn("Can't find parent node of these clocks\n");
+ goto out;
+ }
+ match = of_match_node(hi3xxx_of_match, parent);
+ if (!match) {
+ pr_warn("Can't find the right parent\n");
+ goto out;
+ }
+
+ if (!hi3xxx_clk_base) {
+ ret = of_iomap(parent, 0);
+ WARN_ON(!ret);
+ hi3xxx_clk_base = ret;
+ } else {
+ ret = hi3xxx_clk_base;
+ }
+out:
+ return ret;
+}
+
+static void __init hi3xxx_clkgate_setup(struct device_node *np)
+{
+ struct clk *clk;
+ const char *clk_name, **parent_names, *name;
+ const __be32 *prop;
+ unsigned long flags = 0;
+ u32 bit_idx;
+ void __iomem *base, *reg;
+
+ base = hi3xxx_init_clocks(np);
+ if (!base)
+ goto err;
+ if (of_property_read_string(np, "clock-output-names", &clk_name))
+ goto err;
+ if (of_property_read_u32(np, "clkgate", &bit_idx))
+ goto err;
+ prop = of_get_address(np, 0, NULL, NULL);
+ if (!prop)
+ goto err;
+ reg = base + be32_to_cpu(*prop);
+
+ /* gate only has the fixed parent */
+ parent_names = kzalloc(sizeof(char *), GFP_KERNEL);
+ if (!parent_names)
+ goto err;
+ parent_names[0] = of_clk_get_parent_name(np, 0);
+
+ if (of_property_read_bool(np, "clkgate-seperated-reg")) {
+ clk = hi3xxx_register_clkgate_sep(NULL, clk_name, parent_names[0],
+ 0, reg, (u8)bit_idx, flags,
+ &hi3xxx_clk_lock);
+ } else {
+ if (of_property_read_bool(np, "clkgate-inverted"))
+ flags |= CLK_GATE_SET_TO_DISABLE;
+ clk = clk_register_gate(NULL, clk_name, parent_names[0], 0, reg,
+ (u8)bit_idx, flags, &hi3xxx_clk_lock);
+ }
+ if (IS_ERR(clk))
+ goto err_clk;
+ if (!of_property_read_string(np, "clock-names", &name))
+ clk_register_clkdev(clk, name, NULL);
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+ return;
+err_clk:
+ kfree(parent_names);
+err:
+ pr_err("Fail on registering hi3xxx clkgate node.\n");
+}
+CLK_OF_DECLARE(hi3xxx_gate, "hisilicon,clk-gate", hi3xxx_clkgate_setup)
+
+static int __init hi3xxx_parse_mux(struct device_node *np,
+ u8 *num_parents,
+ u32 *table)
+{
+ int i, cnt, ret;
+
+ /* get the count of items in mux */
+ for (i = 0, cnt = 0; ; i++, cnt++) {
+ /* parent's #clock-cells property is always 0 */
+ if (!of_parse_phandle(np, "clocks", i))
+ break;
+ }
+
+ for (i = 0; i < cnt; i++) {
+ if (!of_clk_get_parent_name(np, i))
+ return -ENOENT;
+ }
+ *num_parents = cnt;
+ table = kzalloc(sizeof(u32 *) * cnt, GFP_KERNEL);
+ if (!table)
+ return -ENOMEM;
+ ret = of_property_read_u32_array(np, "clkmux-table",
+ table, cnt);
+ if (ret)
+ goto err;
+ return 0;
+err:
+ kfree(table);
+ return ret;
+}
+
+static void __init hi3xxx_clkmux_setup(struct device_node *np)
+{
+ struct clk *clk;
+ const char *clk_name, **parent_names = NULL;
+ const __be32 *prop;
+ u32 mask, *table = NULL;
+ u8 num_parents, shift, clk_mux_flags = 0;
+ void __iomem *reg, *base;
+ int i, ret;
+
+ base = hi3xxx_init_clocks(np);
+ if (!base)
+ goto err;
+ if (of_property_read_string(np, "clock-output-names", &clk_name))
+ goto err;
+ prop = of_get_address(np, 0, NULL, NULL);
+ if (!prop)
+ goto err;
+ reg = base + be32_to_cpu(*prop);
+ if (of_property_read_u32(np, "clkmux-mask", &mask))
+ goto err;
+ if (of_property_read_bool(np, "clkmux-hiword-mask"))
+ clk_mux_flags = CLK_MUX_HIWORD_MASK;
+
+ ret = hi3xxx_parse_mux(np, &num_parents, table);
+ if (ret)
+ goto err;
+
+ parent_names = kzalloc(sizeof(char *) * num_parents, GFP_KERNEL);
+ if (!parent_names)
+ goto err_table;
+ for (i = 0; i < num_parents; i++)
+ parent_names[i] = of_clk_get_parent_name(np, i);
+
+ shift = ffs(mask) - 1;
+ mask = mask >> shift;
+ clk = clk_register_mux_table(NULL, clk_name, parent_names, num_parents,
+ CLK_SET_RATE_PARENT, reg, shift, mask,
+ clk_mux_flags, table, &hi3xxx_clk_lock);
+ if (IS_ERR(clk))
+ goto err_clk;
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+
+ return;
+err_clk:
+ kfree(parent_names);
+err_table:
+ kfree(table);
+err:
+ pr_err("Fail on registering hi3xxx clkmux node.\n");
+}
+CLK_OF_DECLARE(hi3xxx_mux, "hisilicon,clk-mux", hi3xxx_clkmux_setup)
+
+static void __init hi3xxx_clkdiv_setup(struct device_node *np, int mode)
+{
+ struct clk *clk;
+ const char *clk_name, **parent_names;
+ const __be32 *prop;
+ struct clk_div_table *table;
+ unsigned int table_num;
+ u32 min, max, mask;
+ u8 shift, width, clk_div_flags = 0;
+ void __iomem *reg, *base;
+ int i;
+
+ base = hi3xxx_init_clocks(np);
+ if (!base)
+ goto err;
+
+ if (of_property_read_string(np, "clock-output-names", &clk_name))
+ goto err;
+ if (of_property_read_u32(np, "clkdiv-mask", &mask))
+ goto err;
+ if (of_property_read_u32(np, "clkdiv-min", &min))
+ goto err;
+ if (of_property_read_u32(np, "clkdiv-max", &max))
+ goto err;
+ if (of_property_read_bool(np, "clkdiv-hiword-mask"))
+ clk_div_flags = CLK_DIVIDER_HIWORD_MASK;
+
+ prop = of_get_address(np, 0, NULL, NULL);
+ if (!prop)
+ goto err;
+ reg = base + be32_to_cpu(*prop);
+
+ table_num = max - min + 1;
+ table = kzalloc(sizeof(*table) * table_num, GFP_KERNEL);
+ if (!table)
+ goto err;
+
+ for (i = 0; i < table_num; i++) {
+ table[i].div = min + i;
+ table[i].val = table[i].div - 1;
+ }
+
+ /* gate only has the fixed parent */
+ parent_names = kzalloc(sizeof(char *), GFP_KERNEL);
+ if (!parent_names)
+ goto err_par;
+ parent_names[0] = of_clk_get_parent_name(np, 0);
+ shift = ffs(mask) - 1;
+ width = fls(mask) - ffs(mask) + 1;
+ clk = clk_register_divider_table(NULL, clk_name, parent_names[0], 0,
+ reg, shift, width, clk_div_flags,
+ table, &hi3xxx_clk_lock);
+ if (IS_ERR(clk))
+ goto err_clk;
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+ return;
+err_clk:
+ kfree(parent_names);
+err_par:
+ kfree(table);
+err:
+ pr_err("Fail on registering hi3xxx clkdiv node\n");
+}
+CLK_OF_DECLARE(hi3xxx_div, "hisilicon,clk-div", hi3xxx_clkdiv_setup)
diff --git a/drivers/clk/hisilicon/clk-hi3xxx.h b/drivers/clk/hisilicon/clk-hi3xxx.h
new file mode 100644
index 0000000..52c4d22
--- /dev/null
+++ b/drivers/clk/hisilicon/clk-hi3xxx.h
@@ -0,0 +1,34 @@
+/*
+ * Hisilicon Hi3620 clock gate driver
+ *
+ * Copyright (c) 2012-2013 Hisilicon Limited.
+ * Copyright (c) 2012-2013 Linaro Limited.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ * Xin Li <li.xin@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef __HI3XXX_CLKGATE_SEPERATED
+#define __HI3XXX_CLKGATE_SEPERATED
+
+extern struct clk *hi3xxx_register_clkgate_sep(struct device *, const char *,
+ const char *, unsigned long,
+ void __iomem *, u8,
+ u8, spinlock_t *);
+
+#endif /* __HI3XXX_CLKGATE_SEPERATED */
diff --git a/drivers/clk/hisilicon/clkgate-seperated.c b/drivers/clk/hisilicon/clkgate-seperated.c
new file mode 100644
index 0000000..1d7b0da
--- /dev/null
+++ b/drivers/clk/hisilicon/clkgate-seperated.c
@@ -0,0 +1,129 @@
+/*
+ * Hisilicon Hi3620 clock gate driver
+ *
+ * Copyright (c) 2012-2013 Hisilicon Limited.
+ * Copyright (c) 2012-2013 Linaro Limited.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ * Xin Li <li.xin@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+
+#include "clk-hi3xxx.h"
+
+/* Hi3620 clock gate register offset */
+#define CLKGATE_SEPERATED_ENABLE 0x0
+#define CLKGATE_SEPERATED_DISABLE 0x4
+#define CLKGATE_SEPERATED_STATUS 0x8
+
+struct clkgate_seperated {
+ struct clk_hw hw;
+ void __iomem *enable; /* enable register */
+ u8 bit_idx; /* bits in enable/disable register */
+ u8 flags;
+ spinlock_t *lock;
+};
+
+static int clkgate_seperated_enable(struct clk_hw *hw)
+{
+ struct clkgate_seperated *sclk;
+ unsigned long flags = 0;
+ u32 reg;
+
+ sclk = container_of(hw, struct clkgate_seperated, hw);
+ if (sclk->lock)
+ spin_lock_irqsave(sclk->lock, flags);
+ reg = BIT(sclk->bit_idx);
+ writel_relaxed(reg, sclk->enable);
+ readl_relaxed(sclk->enable + CLKGATE_SEPERATED_STATUS);
+ if (sclk->lock)
+ spin_unlock_irqrestore(sclk->lock, flags);
+ return 0;
+}
+
+static void clkgate_seperated_disable(struct clk_hw *hw)
+{
+ struct clkgate_seperated *sclk;
+ unsigned long flags = 0;
+ u32 reg;
+
+ sclk = container_of(hw, struct clkgate_seperated, hw);
+ if (sclk->lock)
+ spin_lock_irqsave(sclk->lock, flags);
+ reg = BIT(sclk->bit_idx);
+ writel_relaxed(reg, sclk->enable + CLKGATE_SEPERATED_DISABLE);
+ readl_relaxed(sclk->enable + CLKGATE_SEPERATED_STATUS);
+ if (sclk->lock)
+ spin_unlock_irqrestore(sclk->lock, flags);
+}
+
+static int clkgate_seperated_is_enabled(struct clk_hw *hw)
+{
+ struct clkgate_seperated *sclk;
+ u32 reg;
+
+ sclk = container_of(hw, struct clkgate_seperated, hw);
+ reg = readl_relaxed(sclk->enable + CLKGATE_SEPERATED_STATUS);
+ reg &= BIT(sclk->bit_idx);
+
+ return reg ? 1 : 0;
+}
+
+static struct clk_ops clkgate_seperated_ops = {
+ .enable = clkgate_seperated_enable,
+ .disable = clkgate_seperated_disable,
+ .is_enabled = clkgate_seperated_is_enabled,
+};
+
+struct clk *hi3xxx_register_clkgate_sep(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 bit_idx,
+ u8 clk_gate_flags, spinlock_t *lock)
+{
+ struct clkgate_seperated *sclk;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ sclk = kzalloc(sizeof(struct clkgate_seperated), GFP_KERNEL);
+ if (!sclk) {
+ pr_err("%s: fail to allocate seperated gated clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ init.name = name;
+ init.ops = &clkgate_seperated_ops;
+ init.flags = flags | CLK_IS_BASIC;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+
+ sclk->enable = reg + CLKGATE_SEPERATED_ENABLE;
+ sclk->bit_idx = bit_idx;
+ sclk->flags = clk_gate_flags;
+ sclk->hw.init = &init;
+
+ clk = clk_register(dev, &sclk->hw);
+ if (IS_ERR(clk))
+ kfree(sclk);
+ return clk;
+}
--
1.8.1.2
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v9 2/7] ARM: hi3xxx: add board support with device tree
2013-08-28 13:10 [PATCH v9 0/7] enable hi3xxx SoC Haojian Zhuang
2013-08-28 13:10 ` [PATCH v9 1/7] clk: hi3xxx: add clock support Haojian Zhuang
@ 2013-08-28 13:10 ` Haojian Zhuang
2013-08-28 13:10 ` [PATCH v9 3/7] ARM: dts: enable hi4511 " Haojian Zhuang
` (4 subsequent siblings)
6 siblings, 0 replies; 13+ messages in thread
From: Haojian Zhuang @ 2013-08-28 13:10 UTC (permalink / raw)
To: linux-arm-kernel
Add board support with device tree for Hisilicon Hi36xx/Hi37xx platform.
Changelog:
v3:
1. Remove .map_io() in DT machine descriptor. Since debug_ll_io_init()
is called by default.
2. Remove .init_machine() in DT machine descriptor. Since
of_platform_populate() is called by default in DT mode.
v2:
1. Remove .init_irq() in DT machine descriptor. Since irqchip_init()
is called by default in DT mode.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
.../bindings/arm/hisilicon/hisilicon.txt | 10 ++++++
arch/arm/Kconfig | 2 ++
arch/arm/Makefile | 1 +
arch/arm/mach-hi3xxx/Kconfig | 12 ++++++++
arch/arm/mach-hi3xxx/Makefile | 5 +++
arch/arm/mach-hi3xxx/hi3xxx.c | 36 ++++++++++++++++++++++
6 files changed, 66 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
create mode 100644 arch/arm/mach-hi3xxx/Kconfig
create mode 100644 arch/arm/mach-hi3xxx/Makefile
create mode 100644 arch/arm/mach-hi3xxx/hi3xxx.c
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
new file mode 100644
index 0000000..3be60c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
@@ -0,0 +1,10 @@
+Hisilicon Platforms Device Tree Bindings
+----------------------------------------------------
+
+Hi3716 Development Board
+Required root node properties:
+ - compatible = "hisilicon,hi3716-dkb";
+
+Hi4511 Board
+Required root node properties:
+ - compatible = "hisilicon,hi3620-hi4511";
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ba412e0..29e119d 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -944,6 +944,8 @@ source "arch/arm/mach-footbridge/Kconfig"
source "arch/arm/mach-gemini/Kconfig"
+source "arch/arm/mach-hi3xxx/Kconfig"
+
source "arch/arm/mach-highbank/Kconfig"
source "arch/arm/mach-integrator/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c0ac0f5..bc69205 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -154,6 +154,7 @@ machine-$(CONFIG_ARCH_DOVE) += dove
machine-$(CONFIG_ARCH_EBSA110) += ebsa110
machine-$(CONFIG_ARCH_EP93XX) += ep93xx
machine-$(CONFIG_ARCH_GEMINI) += gemini
+machine-$(CONFIG_ARCH_HI3xxx) += hi3xxx
machine-$(CONFIG_ARCH_HIGHBANK) += highbank
machine-$(CONFIG_ARCH_INTEGRATOR) += integrator
machine-$(CONFIG_ARCH_IOP13XX) += iop13xx
diff --git a/arch/arm/mach-hi3xxx/Kconfig b/arch/arm/mach-hi3xxx/Kconfig
new file mode 100644
index 0000000..68bd26c
--- /dev/null
+++ b/arch/arm/mach-hi3xxx/Kconfig
@@ -0,0 +1,12 @@
+config ARCH_HI3xxx
+ bool "Hisilicon Hi36xx/Hi37xx family" if ARCH_MULTI_V7
+ select ARM_AMBA
+ select ARM_GIC
+ select ARM_TIMER_SP804
+ select CACHE_L2X0
+ select CLKSRC_OF
+ select GENERIC_CLOCKEVENTS
+ select PINCTRL
+ select PINCTRL_SINGLE
+ help
+ Support for Hisilicon Hi36xx/Hi37xx processor family
diff --git a/arch/arm/mach-hi3xxx/Makefile b/arch/arm/mach-hi3xxx/Makefile
new file mode 100644
index 0000000..d68ebb3
--- /dev/null
+++ b/arch/arm/mach-hi3xxx/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for Hisilicon Hi36xx/Hi37xx processors line
+#
+
+obj-y += hi3xxx.o
diff --git a/arch/arm/mach-hi3xxx/hi3xxx.c b/arch/arm/mach-hi3xxx/hi3xxx.c
new file mode 100644
index 0000000..e7c54bc
--- /dev/null
+++ b/arch/arm/mach-hi3xxx/hi3xxx.c
@@ -0,0 +1,36 @@
+/*
+ * (Hisilicon's Hi36xx/Hi37xx SoC based) flattened device tree enabled machine
+ *
+ * Copyright (c) 2012-2013 Hisilicon Ltd.
+ * Copyright (c) 2012-2013 Linaro Ltd.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+#include <linux/irqchip.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+static void __init hi3xxx_timer_init(void)
+{
+ of_clk_init(NULL);
+ clocksource_of_init();
+}
+
+static const char *hs_compat[] __initdata = {
+ "hisilicon,hi3620-hi4511",
+ NULL,
+};
+
+DT_MACHINE_START(HI3xxx, "Hisilicon Hi36xx/Hi37xx (Flattened Device Tree)")
+ .init_time = hi3xxx_timer_init,
+ .dt_compat = hs_compat,
+MACHINE_END
--
1.8.1.2
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v9 3/7] ARM: dts: enable hi4511 with device tree
2013-08-28 13:10 [PATCH v9 0/7] enable hi3xxx SoC Haojian Zhuang
2013-08-28 13:10 ` [PATCH v9 1/7] clk: hi3xxx: add clock support Haojian Zhuang
2013-08-28 13:10 ` [PATCH v9 2/7] ARM: hi3xxx: add board support with device tree Haojian Zhuang
@ 2013-08-28 13:10 ` Haojian Zhuang
2013-08-29 18:13 ` Kevin Hilman
2013-08-28 13:10 ` [PATCH v9 4/7] ARM: config: enable hi3xxx in multi_v7_defconfig Haojian Zhuang
` (3 subsequent siblings)
6 siblings, 1 reply; 13+ messages in thread
From: Haojian Zhuang @ 2013-08-28 13:10 UTC (permalink / raw)
To: linux-arm-kernel
Enable Hisilicon Hi4511 development platform with device tree support.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/hi3620-clk.dtsi | 1058 +++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/hi3620.dtsi | 513 ++++++++++++++++++
arch/arm/boot/dts/hi4511.dts | 648 +++++++++++++++++++++++
4 files changed, 2220 insertions(+)
create mode 100644 arch/arm/boot/dts/hi3620-clk.dtsi
create mode 100644 arch/arm/boot/dts/hi3620.dtsi
create mode 100644 arch/arm/boot/dts/hi4511.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 641b3c9..6e7c1ca 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -61,6 +61,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
exynos5250-snow.dtb \
exynos5420-smdk5420.dtb \
exynos5440-ssdk5440.dtb
+dtb-$(CONFIG_ARCH_HI3xxx) += hi4511.dtb
dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
ecx-2000.dtb
dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
diff --git a/arch/arm/boot/dts/hi3620-clk.dtsi b/arch/arm/boot/dts/hi3620-clk.dtsi
new file mode 100644
index 0000000..78307c6
--- /dev/null
+++ b/arch/arm/boot/dts/hi3620-clk.dtsi
@@ -0,0 +1,1058 @@
+/*
+ * Hisilicon Ltd. Hi3620 SoC
+ *
+ * Copyright (C) 2012-2013 Hisilicon Ltd.
+ * Copyright (C) 2012-2013 Linaro Ltd.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+/ {
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ osc32k: osc32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "osc32khz";
+ };
+ osc26m: osc26m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ clock-output-names = "osc26mhz";
+ };
+ pclk: pclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ clock-output-names = "apb_pclk";
+ };
+ pll_arm0: pll_arm0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1600000000>;
+ clock-output-names = "armpll0";
+ };
+ pll_arm1: pll_arm1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1600000000>;
+ clock-output-names = "armpll1";
+ };
+ pll_peri: pll_peri {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1440000000>;
+ clock-output-names = "armpll2";
+ };
+ pll_usb: pll_usb {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1440000000>;
+ clock-output-names = "armpll3";
+ };
+ pll_hdmi: pll_hdmi {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1188000000>;
+ clock-output-names = "armpll4";
+ };
+ pll_gpu: pll_gpu {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1300000000>;
+ clock-output-names = "armpll5";
+ };
+ rclk_tcxo: rclk_tcxo {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&osc26m>;
+ clock-output-names = "rclk_tcxo";
+ clock-mult = <1>;
+ clock-div = <4>;
+ };
+ rclk_cfgaxi: rclk_cfgaxi {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&pll_peri>;
+ clock-output-names = "rclk_cfgaxi";
+ clock-mult = <1>;
+ clock-div = <30>;
+ };
+ rclk_pico: rclk_pico {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&hsic_div>;
+ clock-output-names = "rclk_pico";
+ clock-mult = <1>;
+ clock-div = <40>;
+ };
+
+ sysctrl: system-controller at fc802000 {
+ compatible = "hisilicon,sysctrl";
+ reg = <0xfc802000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ timer0_mux: timer0_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk01>;
+ clock-output-names = "timer0_mux";
+ reg = <0>;
+ clkmux-mask = <0x18000>;
+ clkmux-table = <0 0x8000>;
+ };
+ timer1_mux: timer1_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk01>;
+ clock-output-names = "timer1_mux";
+ reg = <0>;
+ clkmux-mask = <0x60000>;
+ clkmux-table = <0 0x20000>;
+ };
+ timer2_mux: timer2_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk23>;
+ clock-output-names = "timer2_mux";
+ reg = <0>;
+ clkmux-mask = <0x180000>;
+ clkmux-table = <0 0x80000>;
+ };
+ timer3_mux: timer3_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk23>;
+ clock-output-names = "timer3_mux";
+ reg = <0>;
+ clkmux-mask = <0x600000>;
+ clkmux-table = <0 0x200000>;
+ };
+ timer4_mux: timer4_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk45>;
+ clock-output-names = "timer4_mux";
+ reg = <0x18>;
+ clkmux-mask = <0x3>;
+ clkmux-table = <0 0x1>;
+ };
+ timer5_mux: timer5_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk45>;
+ clock-output-names = "timer5_mux";
+ reg = <0x18>;
+ clkmux-mask = <0xc>;
+ clkmux-table = <0 0x4>;
+ };
+ timer6_mux: timer6_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk67>;
+ clock-output-names = "timer6_mux";
+ reg = <0x18>;
+ clkmux-mask = <0x30>;
+ clkmux-table = <0 0x10>;
+ };
+ timer7_mux: timer7_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk67>;
+ clock-output-names = "timer7_mux";
+ reg = <0x18>;
+ clkmux-mask = <0xc0>;
+ clkmux-table = <0 0x40>;
+ };
+ timer8_mux: timer8_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk89>;
+ clock-output-names = "timer8_mux";
+ reg = <0x18>;
+ clkmux-mask = <0x300>;
+ clkmux-table = <0 0x100>;
+ };
+ timer9_mux: timer9_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk89>;
+ clock-output-names = "timer9_mux";
+ reg = <0x18>;
+ clkmux-mask = <0xc00>;
+ clkmux-table = <0 0x400>;
+ };
+ uart0_mux: uart0_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &pclk>;
+ clock-output-names = "uart0_mux";
+ reg = <0x100>;
+ clkmux-mask = <0x80>;
+ /* each item value */
+ clkmux-table = <0 0x80>;
+ clkmux-hiword-mask;
+ };
+ uart1_mux: uart1_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &pclk>;
+ clock-output-names = "uart1_mux";
+ reg = <0x100>;
+ clkmux-mask = <0x100>;
+ clkmux-table = <0x0 0x100>;
+ clkmux-hiword-mask;
+ };
+ uart2_mux: uart2_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &pclk>;
+ clock-output-names = "uart2_mux";
+ reg = <0x100>;
+ clkmux-mask = <0x200>;
+ clkmux-table = <0 0x200>;
+ clkmux-hiword-mask;
+ };
+ uart3_mux: uart3_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &pclk>;
+ clock-output-names = "uart3_mux";
+ reg = <0x100>;
+ clkmux-mask = <0x400>;
+ clkmux-table = <0 0x400>;
+ clkmux-hiword-mask;
+ };
+ uart4_mux: uart4_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &pclk>;
+ clock-output-names = "uart4_mux";
+ reg = <0x100>;
+ clkmux-mask = <0x800>;
+ clkmux-table = <0 0x800>;
+ clkmux-hiword-mask;
+ };
+ spi0_mux: spi0_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &rclk_cfgaxi>;
+ clock-output-names = "spi0_mux";
+ reg = <0x100>;
+ clkmux-mask = <0x1000>;
+ clkmux-table = <0 0x1000>;
+ clkmux-hiword-mask;
+ };
+ spi1_mux: spi1_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &rclk_cfgaxi>;
+ clock-output-names = "spi1_mux";
+ reg = <0x100>;
+ clkmux-mask = <0x2000>;
+ clkmux-table = <0 0x2000>;
+ clkmux-hiword-mask;
+ };
+ spi2_mux: spi2_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &rclk_cfgaxi>;
+ clock-output-names = "spi2_mux";
+ reg = <0x100>;
+ clkmux-mask = <0x4000>;
+ clkmux-table = <0 0x4000>;
+ clkmux-hiword-mask;
+ };
+ rclk_shareAXI: rclk_shareAXI {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&pll_usb &pll_peri>;
+ clock-output-names = "rclk_shareAXI";
+ reg = <0x100>;
+ clkmux-mask = <0x8000>;
+ clkmux-table = <0 0x8000>;
+ clkmux-hiword-mask;
+ };
+ pwm0_mux: pwm0_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &osc26m>;
+ clock-output-names = "pwm0_mux";
+ reg = <0x104>;
+ clkmux-mask = <0x400>;
+ clkmux-table = <0 0x400>;
+ clkmux-hiword-mask;
+ };
+ pwm1_mux: pwm1_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &osc26m>;
+ clock-output-names = "pwm1_mux";
+ reg = <0x104>;
+ clkmux-mask = <0x800>;
+ clkmux-table = <0 0x800>;
+ clkmux-hiword-mask;
+ };
+ sd_mux: sd_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&pll_usb &pll_peri>;
+ clock-output-names = "sd_mux";
+ reg = <0x108>;
+ clkmux-mask = <0x10>;
+ clkmux-table = <0 0x10>;
+ clkmux-hiword-mask;
+ };
+ mmc1_mux: mmc1_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&pll_usb &pll_peri>;
+ clock-output-names = "mmc1_mux";
+ reg = <0x108>;
+ clkmux-mask = <0x200>;
+ clkmux-table = <0 0x200>;
+ clkmux-hiword-mask;
+ };
+ rclk_mmc1_mux: rclk_mmc1_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &mmc1_div>;
+ clock-output-names = "rclk_mmc1_mux";
+ reg = <0x108>;
+ clkmux-mask = <0x400>;
+ clkmux-table = <0 0x400>;
+ clkmux-hiword-mask;
+ };
+ g2d_mux: g2d_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&pll_peri &pll_usb>;
+ clock-output-names = "g2d_mux";
+ reg = <0x10c>;
+ clkmux-mask = <0x20>;
+ clkmux-table = <0 0x20>;
+ clkmux-hiword-mask;
+ };
+ venc_mux: venc_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&pll_peri &pll_usb>;
+ clock-output-names = "venc_mux";
+ reg = <0x10c>;
+ clkmux-mask = <0x800>;
+ clkmux-table = <0 0x800>;
+ clkmux-hiword-mask;
+ };
+ vdec_mux: vdec_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&pll_peri &pll_usb>;
+ clock-output-names = "vdec_mux";
+ reg = <0x110>;
+ clkmux-mask = <0x20>;
+ clkmux-table = <0 0x20>;
+ clkmux-hiword-mask;
+ };
+ vpp_mux: vpp_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&pll_peri &pll_usb>;
+ clock-output-names = "vpp_mux";
+ reg = <0x110>;
+ clkmux-mask = <0x800>;
+ clkmux-table = <0 0x800>;
+ clkmux-hiword-mask;
+ };
+ edc0_mux: edc0_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&pll_peri &pll_usb>;
+ clock-output-names = "edc0_mux";
+ reg = <0x114>;
+ clkmux-mask = <0x40>;
+ clkmux-table = <0 0x40>;
+ clkmux-hiword-mask;
+ };
+ ldi0_mux: ldi0_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&pll_peri &pll_hdmi &pll_usb &pll_gpu>;
+ clock-output-names = "ldi0_mux";
+ reg = <0x114>;
+ clkmux-mask = <0x6000>;
+ clkmux-table = <0 0x2000 0x4000 0x6000>;
+ clkmux-hiword-mask;
+ };
+ edc1_mux: edc1_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&pll_peri &pll_usb>;
+ clock-output-names = "edc1_mux";
+ reg = <0x118>;
+ clkmux-mask = <0x40>;
+ clkmux-table = <0 0x40>;
+ clkmux-hiword-mask;
+ };
+ ldi1_mux: ldi1_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&pll_peri &pll_hdmi &pll_usb &pll_gpu>;
+ clock-output-names = "ldi1_mux";
+ reg = <0x118>;
+ clkmux-mask = <0xc000>;
+ clkmux-table = <0 0x4000 0x8000 0xc000>;
+ clkmux-hiword-mask;
+ };
+ rclk_hsic: rclk_hsic {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&pll_usb &pll_peri>;
+ clock-output-names = "rclk_hsic";
+ reg = <0x130>;
+ clkmux-mask = <0x4>;
+ clkmux-table = <0 0x4>;
+ clkmux-hiword-mask;
+ };
+ mmc2_mux: mmc2_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&pll_usb &pll_peri>;
+ clock-output-names = "mmc2_mux";
+ reg = <0x140>;
+ clkmux-mask = <0x10>;
+ clkmux-table = <0 0x10>;
+ clkmux-hiword-mask;
+ };
+ mmc3_mux: mmc3_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&pll_usb &pll_peri>;
+ clock-output-names = "mmc3_mux";
+ reg = <0x140>;
+ clkmux-mask = <0x200>;
+ clkmux-table = <0 0x200>;
+ clkmux-hiword-mask;
+ };
+
+ shareaxi_div: shareaxi_div {
+ compatible = "hisilicon,clk-div";
+ #clock-cells = <0>;
+ clocks = <&rclk_shareAXI>;
+ clock-output-names = "shareaxi_div";
+ reg = <0x100>;
+ clkdiv-mask = <0x1f>;
+ clkdiv-min = <1>;
+ clkdiv-max = <32>;
+ clkdiv-hiword-mask;
+ };
+ cfgaxi_div: cfgaxi_div {
+ compatible = "hisilicon,clk-div";
+ #clock-cells = <0>;
+ clocks = <&shareaxi_div>;
+ clock-output-names = "cfgaxi_div";
+ reg = <0x100>;
+ clkdiv-mask = <0x60>;
+ clkdiv-min = <2>;
+ clkdiv-max = <2>;
+ clkdiv-hiword-mask;
+ };
+ sd_div: sd_div {
+ compatible = "hisilicon,clk-div";
+ #clock-cells = <0>;
+ clocks = <&sd_mux>;
+ clock-output-names = "sd_div";
+ reg = <0x108>;
+ clkdiv-mask = <0xf>;
+ clkdiv-min = <1>;
+ clkdiv-max = <16>;
+ clkdiv-hiword-mask;
+ };
+ mmc1_div: mmc1_div {
+ compatible = "hisilicon,clk-div";
+ #clock-cells = <0>;
+ clocks = <&mmc1_mux>;
+ clock-output-names = "mmc1_div";
+ reg = <0x108>;
+ clkdiv-mask = <0x1e0>;
+ clkdiv-min = <1>;
+ clkdiv-max = <16>;
+ clkdiv-hiword-mask;
+ };
+ hsic_div: hsic_div {
+ compatible = "hisilicon,clk-div";
+ #clock-cells = <0>;
+ clocks = <&rclk_hsic>;
+ clock-output-names = "hsic_div";
+ reg = <0x130>;
+ clkdiv-mask = <0x3>;
+ clkdiv-min = <1>;
+ clkdiv-max = <4>;
+ clkdiv-hiword-mask;
+ };
+ mmc2_div: mmc2_div {
+ compatible = "hisilicon,clk-div";
+ #clock-cells = <0>;
+ clocks = <&mmc1_mux>;
+ clock-output-names = "mmc2_div";
+ reg = <0x140>;
+ clkdiv-mask = <0xf>;
+ clkdiv-min = <1>;
+ clkdiv-max = <16>;
+ clkdiv-hiword-mask;
+ };
+ mmc3_div: mmc3_div {
+ compatible = "hisilicon,clk-div";
+ #clock-cells = <0>;
+ clocks = <&mmc1_mux>;
+ clock-output-names = "mmc3_div";
+ reg = <0x140>;
+ clkdiv-mask = <0x1e0>;
+ clkdiv-min = <1>;
+ clkdiv-max = <16>;
+ clkdiv-hiword-mask;
+ };
+
+ timerclk01: timerclk01 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&timer_rclk01>;
+ clock-output-names = "timerclk01";
+ reg = <0x20>;
+ clkgate = <0>;
+ clkgate-seperated-reg;
+ };
+ timer_rclk01: timer_rclk01 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&rclk_tcxo>;
+ clock-output-names = "timer_rclk01";
+ reg = <0x20>;
+ clkgate = <1>;
+ clkgate-seperated-reg;
+ };
+ timerclk23: timerclk23 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&timer_rclk23>;
+ clock-output-names = "timerclk23";
+ reg = <0x20>;
+ clkgate = <2>;
+ clkgate-seperated-reg;
+ };
+ timer_rclk23: timer_rclk23 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&rclk_tcxo>;
+ clock-output-names = "timer_rclk23";
+ reg = <0x20>;
+ clkgate = <3>;
+ clkgate-seperated-reg;
+ };
+ rtcclk: rtcclk {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "rtcclk";
+ reg = <0x20>;
+ clkgate = <5>;
+ clkgate-seperated-reg;
+ };
+ kpc_clk: kpc_clk {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "kpc_clk";
+ reg = <0x20>;
+ clkgate = <6>;
+ clkgate-seperated-reg;
+ };
+ gpioclk0: gpioclk0 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk0";
+ reg = <0x20>;
+ clkgate = <8>;
+ clkgate-seperated-reg;
+ };
+ gpioclk1: gpioclk1 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk1";
+ reg = <0x20>;
+ clkgate = <9>;
+ clkgate-seperated-reg;
+ };
+ gpioclk2: gpioclk2 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk2";
+ reg = <0x20>;
+ clkgate = <10>;
+ clkgate-seperated-reg;
+ };
+ gpioclk3: gpioclk3 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk3";
+ reg = <0x20>;
+ clkgate = <11>;
+ clkgate-seperated-reg;
+ };
+ gpioclk4: gpioclk4 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk4";
+ reg = <0x20>;
+ clkgate = <12>;
+ clkgate-seperated-reg;
+ };
+ gpioclk5: gpioclk5 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk5";
+ reg = <0x20>;
+ clkgate = <13>;
+ clkgate-seperated-reg;
+ };
+ gpioclk6: gpioclk6 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk6";
+ reg = <0x20>;
+ clkgate = <14>;
+ clkgate-seperated-reg;
+ };
+ gpioclk7: gpioclk7 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk7";
+ reg = <0x20>;
+ clkgate = <15>;
+ clkgate-seperated-reg;
+ };
+ gpioclk8: gpioclk8 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk8";
+ reg = <0x20>;
+ clkgate = <16>;
+ clkgate-seperated-reg;
+ };
+ gpioclk9: gpioclk9 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk9";
+ reg = <0x20>;
+ clkgate = <17>;
+ clkgate-seperated-reg;
+ };
+ gpioclk10: gpioclk10 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk10";
+ reg = <0x20>;
+ clkgate = <18>;
+ clkgate-seperated-reg;
+ };
+ gpioclk11: gpioclk11 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk11";
+ reg = <0x20>;
+ clkgate = <19>;
+ clkgate-seperated-reg;
+ };
+ gpioclk12: gpioclk12 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk12";
+ reg = <0x20>;
+ clkgate = <20>;
+ clkgate-seperated-reg;
+ };
+ gpioclk13: gpioclk13 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk13";
+ reg = <0x20>;
+ clkgate = <21>;
+ clkgate-seperated-reg;
+ };
+ gpioclk14: gpioclk14 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk14";
+ reg = <0x20>;
+ clkgate = <22>;
+ clkgate-seperated-reg;
+ };
+ gpioclk15: gpioclk15 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk15";
+ reg = <0x20>;
+ clkgate = <23>;
+ clkgate-seperated-reg;
+ };
+ gpioclk16: gpioclk16 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk16";
+ reg = <0x20>;
+ clkgate = <24>;
+ clkgate-seperated-reg;
+ };
+ gpioclk17: gpioclk17 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk17";
+ reg = <0x20>;
+ clkgate = <25>;
+ clkgate-seperated-reg;
+ };
+ gpioclk18: gpioclk18 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk18";
+ reg = <0x20>;
+ clkgate = <26>;
+ clkgate-seperated-reg;
+ };
+ gpioclk19: gpioclk19 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk19";
+ reg = <0x20>;
+ clkgate = <27>;
+ clkgate-seperated-reg;
+ };
+ gpioclk20: gpioclk20 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk20";
+ reg = <0x20>;
+ clkgate = <28>;
+ clkgate-seperated-reg;
+ };
+ gpioclk21: gpioclk21 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk21";
+ reg = <0x20>;
+ clkgate = <29>;
+ clkgate-seperated-reg;
+ };
+ dphy0_clk: dphy0_clk {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&osc26m>;
+ clock-output-names = "dphy0_clk";
+ reg = <0x30>;
+ clkgate = <15>;
+ clkgate-seperated-reg;
+ };
+ dphy1_clk: dphy1_clk {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&osc26m>;
+ clock-output-names = "dphy1_clk";
+ reg = <0x30>;
+ clkgate = <16>;
+ clkgate-seperated-reg;
+ };
+ dphy2_clk: dphy2_clk {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&osc26m>;
+ clock-output-names = "dphy2_clk";
+ reg = <0x30>;
+ clkgate = <17>;
+ clkgate-seperated-reg;
+ };
+ usbpicophy_clk: usbpicophy_clk {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&rclk_pico>;
+ clock-output-names = "usbpicophy_clk";
+ reg = <0x30>;
+ clkgate = <24>;
+ clkgate-seperated-reg;
+ };
+ acp_clk: acp_clk {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&rclk_cfgaxi>;
+ clock-output-names = "acp_clk";
+ reg = <0x30>;
+ clkgate = <28>;
+ clkgate-seperated-reg;
+ };
+ timerclk45: timerclk45 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&rclk_tcxo>;
+ clock-output-names = "timerclk45";
+ reg = <0x40>;
+ clkgate = <3>;
+ clkgate-seperated-reg;
+ };
+ timerclk67: timerclk67 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&rclk_tcxo>;
+ clock-output-names = "timerclk67";
+ reg = <0x40>;
+ clkgate = <4>;
+ clkgate-seperated-reg;
+ };
+ timerclk89: timerclk89 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&rclk_tcxo>;
+ clock-output-names = "timerclk89";
+ reg = <0x40>;
+ clkgate = <5>;
+ clkgate-seperated-reg;
+ };
+ pwmclk0: pwmclk0 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pwm0_mux>;
+ clock-output-names = "pwmclk0";
+ reg = <0x40>;
+ clkgate = <7>;
+ clkgate-seperated-reg;
+ };
+ pwmclk1: pwmclk1 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pwm1_mux>;
+ clock-output-names = "pwmclk1";
+ reg = <0x40>;
+ clkgate = <8>;
+ clkgate-seperated-reg;
+ };
+ uartclk0: uartclk0 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&uart0_mux>;
+ clock-output-names = "uartclk0";
+ reg = <0x40>;
+ clkgate = <16>;
+ clkgate-seperated-reg;
+ };
+ uartclk1: uartclk1 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&uart1_mux>;
+ clock-output-names = "uartclk1";
+ reg = <0x40>;
+ clkgate = <17>;
+ clkgate-seperated-reg;
+ };
+ uartclk2: uartclk2 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&uart2_mux>;
+ clock-output-names = "uartclk2";
+ reg = <0x40>;
+ clkgate = <18>;
+ clkgate-seperated-reg;
+ };
+ uartclk3: uartclk3 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&uart3_mux>;
+ clock-output-names = "uartclk3";
+ reg = <0x40>;
+ clkgate = <19>;
+ clkgate-seperated-reg;
+ };
+ uartclk4: uartclk4 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&uart4_mux>;
+ clock-output-names = "uartclk4";
+ reg = <0x40>;
+ clkgate = <20>;
+ clkgate-seperated-reg;
+ };
+ spiclk0: spiclk0 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&spi0_mux>;
+ clock-output-names = "spiclk0";
+ reg = <0x40>;
+ clkgate = <21>;
+ clkgate-seperated-reg;
+ };
+ spiclk1: spiclk1 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&spi1_mux>;
+ clock-output-names = "spiclk1";
+ reg = <0x40>;
+ clkgate = <22>;
+ clkgate-seperated-reg;
+ };
+ spiclk2: spiclk2 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&spi2_mux>;
+ clock-output-names = "spiclk2";
+ reg = <0x40>;
+ clkgate = <23>;
+ clkgate-seperated-reg;
+ };
+ i2cclk0: i2cclk0 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "i2cclk0";
+ reg = <0x40>;
+ clkgate = <24>;
+ clkgate-seperated-reg;
+ };
+ i2cclk1: i2cclk1 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "i2cclk1";
+ reg = <0x40>;
+ clkgate = <25>;
+ clkgate-seperated-reg;
+ };
+ sci_clk: sci_clk {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&osc26m>;
+ clock-output-names = "sci_clk";
+ reg = <0x40>;
+ clkgate = <26>;
+ clkgate-seperated-reg;
+ };
+ i2cclk2: i2cclk2 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "i2cclk2";
+ reg = <0x40>;
+ clkgate = <28>;
+ clkgate-seperated-reg;
+ };
+ i2cclk3: i2cclk3 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "i2cclk3";
+ reg = <0x40>;
+ clkgate = <29>;
+ clkgate-seperated-reg;
+ };
+ ddrc_per_clk: ddrc_per_clk {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&rclk_cfgaxi>;
+ clock-output-names = "ddrc_per_clk";
+ reg = <0x50>;
+ clkgate = <9>;
+ clkgate-seperated-reg;
+ };
+ dmac_clk: dmac_clk {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&rclk_cfgaxi>;
+ clock-output-names = "dmac_clk";
+ reg = <0x50>;
+ clkgate = <10>;
+ clkgate-seperated-reg;
+ };
+ usb2dvc_clk: usb2dvc_clk {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&rclk_cfgaxi>;
+ clock-output-names = "usb2dvc_clk";
+ reg = <0x50>;
+ clkgate = <10>;
+ clkgate-seperated-reg;
+ };
+ sd_clk: sd_clk {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&sd_div>;
+ clock-output-names = "sd_clk";
+ reg = <0x50>;
+ clkgate = <20>;
+ clkgate-seperated-reg;
+ };
+ mmc_clk1: mmc_clk1 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&rclk_mmc1_mux>;
+ clock-output-names = "mmc_clk1";
+ reg = <0x50>;
+ clkgate = <21>;
+ clkgate-seperated-reg;
+ };
+ mmc_clk2: mmc_clk2 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&mmc2_div>;
+ clock-output-names = "mmc_clk2";
+ reg = <0x50>;
+ clkgate = <22>;
+ clkgate-seperated-reg;
+ };
+ mmc_clk3: mmc_clk3 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&mmc3_div>;
+ clock-output-names = "mmc_clk3";
+ reg = <0x50>;
+ clkgate = <23>;
+ clkgate-seperated-reg;
+ };
+ mcu_clk: mcu_clk {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&acp_clk>;
+ clock-output-names = "mcu_clk";
+ reg = <0x50>;
+ clkgate = <24>;
+ clkgate-seperated-reg;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi
new file mode 100644
index 0000000..e05c65c
--- /dev/null
+++ b/arch/arm/boot/dts/hi3620.dtsi
@@ -0,0 +1,513 @@
+/*
+ * Hisilicon Ltd. Hi3620 SoC
+ *
+ * Copyright (C) 2012-2013 Hisilicon Ltd.
+ * Copyright (C) 2012-2013 Linaro Ltd.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+/include/ "skeleton.dtsi"
+
+/include/ "hi3620-clk.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ amba {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "arm,amba-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ L2: l2-cache {
+ compatible = "arm,pl310-cache";
+ reg = <0xfc10000 0x100000>;
+ interrupts = <0 15 4>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ gic: interrupt-controller at fc001000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ /* gic dist base, gic cpu base */
+ reg = <0xfc001000 0x1000>, <0xfc000100 0x100>;
+ };
+
+ dual_timer0: dual_timer at fc800000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0xfc800000 0x1000>;
+ /* timer00 & timer01 */
+ interrupts = <0 0 4>, <0 1 4>;
+ clocks = <&timer0_mux &timer1_mux>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ dual_timer1: dual_timer at fc801000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0xfc801000 0x1000>;
+ /* timer10 & timer11 */
+ interrupts = <0 2 4>, <0 3 4>;
+ clocks = <&timer2_mux &timer3_mux>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ dual_timer2: dual_timer at fca01000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0xfca01000 0x1000>;
+ /* timer20 & timer21 */
+ interrupts = <0 4 4>, <0 5 4>;
+ clocks = <&timer4_mux &timer5_mux>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ dual_timer3: dual_timer at fca02000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0xfca02000 0x1000>;
+ /* timer30 & timer31 */
+ interrupts = <0 6 4>, <0 7 4>;
+ clocks = <&timer6_mux &timer7_mux>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ dual_timer4: dual_timer at fca03000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0xfca03000 0x1000>;
+ /* timer40 & timer41 */
+ interrupts = <0 96 4>, <0 97 4>;
+ clocks = <&timer8_mux &timer9_mux>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ uart0: uart at fcb00000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xfcb00000 0x1000>;
+ interrupts = <0 20 4>;
+ clocks = <&uartclk0>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ uart1: uart at fcb01000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xfcb01000 0x1000>;
+ interrupts = <0 21 4>;
+ clocks = <&uartclk1>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ uart2: uart at fcb02000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xfcb02000 0x1000>;
+ interrupts = <0 22 4>;
+ clocks = <&uartclk2>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ uart3: uart at fcb03000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xfcb03000 0x1000>;
+ interrupts = <0 23 4>;
+ clocks = <&uartclk3>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ uart4: uart at fcb04000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xfcb04000 0x1000>;
+ interrupts = <0 24 4>;
+ clocks = <&uartclk4>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gpio0: gpio at fc806000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc806000 0x1000>;
+ interrupts = <0 64 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 2 0 1 &pmx0 3 0 1 &pmx0 4 0 1
+ &pmx0 5 0 1 &pmx0 6 1 1 &pmx0 7 2 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk0>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio1: gpio at fc807000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc807000 0x1000>;
+ interrupts = <0 65 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 3 1 &pmx0 1 3 1 &pmx0 2 3 1
+ &pmx0 3 3 1 &pmx0 4 3 1 &pmx0 5 4 1
+ &pmx0 6 5 1 &pmx0 7 6 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk1>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio2: gpio at fc808000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc808000 0x1000>;
+ interrupts = <0 66 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 7 1 &pmx0 1 8 1 &pmx0 2 9 1
+ &pmx0 3 10 1 &pmx0 4 3 1 &pmx0 5 3 1
+ &pmx0 6 3 1 &pmx0 7 3 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk2>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio3: gpio at fc809000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc809000 0x1000>;
+ interrupts = <0 67 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 3 1 &pmx0 1 3 1 &pmx0 2 3 1
+ &pmx0 3 3 1 &pmx0 4 11 1 &pmx0 5 11 1
+ &pmx0 6 11 1 &pmx0 7 11 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk3>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio4: gpio at fc80a000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc80a000 0x1000>;
+ interrupts = <0 68 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 11 1 &pmx0 1 11 1 &pmx0 2 11 1
+ &pmx0 3 11 1 &pmx0 4 12 1 &pmx0 5 12 1
+ &pmx0 6 13 1 &pmx0 7 13 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk4>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio5: gpio at fc80b000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc80b000 0x1000>;
+ interrupts = <0 69 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 14 1 &pmx0 1 15 1 &pmx0 2 16 1
+ &pmx0 3 16 1 &pmx0 4 16 1 &pmx0 5 16 1
+ &pmx0 6 16 1 &pmx0 7 16 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk5>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio6: gpio at fc80c000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc80c000 0x1000>;
+ interrupts = <0 70 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 16 1 &pmx0 1 16 1 &pmx0 2 17 1
+ &pmx0 3 17 1 &pmx0 4 18 1 &pmx0 5 18 1
+ &pmx0 6 18 1 &pmx0 7 19 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk6>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio7: gpio at fc80d000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc80d000 0x1000>;
+ interrupts = <0 71 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 19 1 &pmx0 1 20 1 &pmx0 2 21 1
+ &pmx0 3 22 1 &pmx0 4 23 1 &pmx0 5 24 1
+ &pmx0 6 25 1 &pmx0 7 26 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk7>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio8: gpio at fc80e000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc80e000 0x1000>;
+ interrupts = <0 72 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 27 1 &pmx0 1 28 1 &pmx0 2 29 1
+ &pmx0 3 30 1 &pmx0 4 31 1 &pmx0 5 32 1
+ &pmx0 6 33 1 &pmx0 7 34 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk8>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio9: gpio at fc80f000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc80f000 0x1000>;
+ interrupts = <0 73 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 35 1 &pmx0 1 36 1 &pmx0 2 37 1
+ &pmx0 3 38 1 &pmx0 4 39 1 &pmx0 5 40 1
+ &pmx0 6 41 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk9>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio10: gpio at fc810000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc810000 0x1000>;
+ interrupts = <0 74 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 2 43 1 &pmx0 3 44 1 &pmx0 4 45 1
+ &pmx0 5 45 1 &pmx0 6 46 1 &pmx0 7 46 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk10>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio11: gpio at fc811000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc811000 0x1000>;
+ interrupts = <0 75 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 47 1 &pmx0 1 47 1 &pmx0 2 47 1
+ &pmx0 3 47 1 &pmx0 4 47 1 &pmx0 5 48 1
+ &pmx0 6 49 1 &pmx0 7 49 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk11>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio12: gpio at fc812000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc812000 0x1000>;
+ interrupts = <0 76 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 49 1 &pmx0 1 50 1 &pmx0 2 49 1
+ &pmx0 3 49 1 &pmx0 4 51 1 &pmx0 5 51 1
+ &pmx0 6 51 1 &pmx0 7 52 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk12>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio13: gpio at fc813000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc813000 0x1000>;
+ interrupts = <0 77 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 51 1 &pmx0 1 51 1 &pmx0 2 53 1
+ &pmx0 3 53 1 &pmx0 4 53 1 &pmx0 5 54 1
+ &pmx0 6 55 1 &pmx0 7 56 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk13>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio14: gpio at fc814000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc814000 0x1000>;
+ interrupts = <0 78 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 57 1 &pmx0 1 97 1 &pmx0 2 97 1
+ &pmx0 3 58 1 &pmx0 4 59 1 &pmx0 5 60 1
+ &pmx0 6 60 1 &pmx0 7 61 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk14>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio15: gpio at fc815000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc815000 0x1000>;
+ interrupts = <0 79 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 61 1 &pmx0 1 62 1 &pmx0 2 62 1
+ &pmx0 3 63 1 &pmx0 4 63 1 &pmx0 5 64 1
+ &pmx0 6 64 1 &pmx0 7 65 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk15>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio16: gpio at fc816000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc816000 0x1000>;
+ interrupts = <0 80 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 66 1 &pmx0 1 67 1 &pmx0 2 68 1
+ &pmx0 3 69 1 &pmx0 4 70 1 &pmx0 5 71 1
+ &pmx0 6 72 1 &pmx0 7 73 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk16>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio17: gpio at fc817000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc817000 0x1000>;
+ interrupts = <0 81 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 74 1 &pmx0 1 75 1 &pmx0 2 76 1
+ &pmx0 3 77 1 &pmx0 4 78 1 &pmx0 5 79 1
+ &pmx0 6 80 1 &pmx0 7 81 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk17>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio18: gpio at fc818000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc818000 0x1000>;
+ interrupts = <0 82 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 82 1 &pmx0 1 83 1 &pmx0 2 83 1
+ &pmx0 3 84 1 &pmx0 4 84 1 &pmx0 5 85 1
+ &pmx0 6 86 1 &pmx0 7 87 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk18>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio19: gpio at fc819000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc819000 0x1000>;
+ interrupts = <0 83 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 87 1 &pmx0 1 87 1 &pmx0 2 88 1
+ &pmx0 3 88 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk19>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio20: gpio at fc81a000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc81a000 0x1000>;
+ interrupts = <0 84 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 89 1 &pmx0 1 89 1 &pmx0 2 90 1
+ &pmx0 3 90 1 &pmx0 4 91 1 &pmx0 5 92 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk20>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio21: gpio at fc81b000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc81b000 0x1000>;
+ interrupts = <0 85 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 3 94 1 &pmx0 7 96 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk21>;
+ clock-names = "apb_pclk";
+ };
+
+ pmx0: pinmux at fc803000 {
+ compatible = "pinctrl-single";
+ reg = <0xfc803000 0x188>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #gpio-range-cells = <3>;
+ ranges;
+
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <7>;
+ /* pin base, nr pins & gpio function */
+ pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1
+ &range 12 1 0 &range 13 29 1
+ &range 43 1 0 &range 44 49 1
+ &range 94 1 1 &range 96 2 1>;
+
+ range: gpio-range {
+ #pinctrl-single,gpio-range-cells = <3>;
+ };
+ };
+
+ pmx1: pinmux at fc803800 {
+ compatible = "pinconf-single";
+ reg = <0xfc803800 0x2dc>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pinctrl-single,register-width = <32>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/hi4511.dts b/arch/arm/boot/dts/hi4511.dts
new file mode 100644
index 0000000..d45104e
--- /dev/null
+++ b/arch/arm/boot/dts/hi4511.dts
@@ -0,0 +1,648 @@
+/*
+ * Copyright (C) 2012-2013 Linaro Ltd.
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+/dts-v1/;
+/include/ "hi3620.dtsi"
+
+/ {
+ model = "Hisilicon Hi4511 Development Board";
+ compatible = "hisilicon,hi3620-hi4511";
+
+ chosen {
+ bootargs = "console=ttyAMA0,115200 root=/dev/ram0 earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x40000000 0x20000000>;
+ };
+
+ amba {
+ dual_timer0: dual_timer at fc800000 {
+ status = "ok";
+ };
+
+ uart0: uart at fcb00000 { /* console */
+ pinctrl-names = "default", "idle";
+ pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
+ pinctrl-1 = <&uart0_pmx_idle &uart0_cfg_idle>;
+ status = "ok";
+ };
+
+ uart1: uart at fcb01000 { /* modem */
+ pinctrl-names = "default", "idle";
+ pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>;
+ pinctrl-1 = <&uart1_pmx_idle &uart1_cfg_idle>;
+ status = "ok";
+ };
+
+ uart2: uart at fcb02000 { /* audience */
+ pinctrl-names = "default", "idle";
+ pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
+ pinctrl-1 = <&uart2_pmx_idle &uart2_cfg_idle>;
+ status = "ok";
+ };
+
+ uart3: uart at fcb03000 {
+ pinctrl-names = "default", "idle";
+ pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
+ pinctrl-1 = <&uart3_pmx_idle &uart3_cfg_idle>;
+ status = "ok";
+ };
+
+ uart4: uart at fcb04000 {
+ pinctrl-names = "default", "idle";
+ pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
+ pinctrl-1 = <&uart4_pmx_idle &uart4_cfg_func>;
+ status = "ok";
+ };
+
+ pmx0: pinmux at fc803000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&board_pmx_pins>;
+
+ board_pmx_pins: board_pmx_pins {
+ pinctrl-single,pins = <
+ 0x008 0x0 /* GPIO -- eFUSE_DOUT */
+ 0x100 0x0 /* USIM_CLK & USIM_DATA (IOMG63) */
+ >;
+ };
+ uart0_pmx_func: uart0_pmx_func {
+ pinctrl-single,pins = <
+ 0x0f0 0x0
+ 0x0f4 0x0 /* UART0_RX & UART0_TX */
+ >;
+ };
+ uart0_pmx_idle: uart0_pmx_idle {
+ pinctrl-single,pins = <
+ /*0x0f0 0x1*/ /* UART0_CTS & UART0_RTS */
+ 0x0f4 0x1 /* UART0_RX & UART0_TX */
+ >;
+ };
+ uart1_pmx_func: uart1_pmx_func {
+ pinctrl-single,pins = <
+ 0x0f8 0x0 /* UART1_CTS & UART1_RTS (IOMG61) */
+ 0x0fc 0x0 /* UART1_RX & UART1_TX (IOMG62) */
+ >;
+ };
+ uart1_pmx_idle: uart1_pmx_idle {
+ pinctrl-single,pins = <
+ 0x0f8 0x1 /* GPIO (IOMG61) */
+ 0x0fc 0x1 /* GPIO (IOMG62) */
+ >;
+ };
+ uart2_pmx_func: uart2_pmx_func {
+ pinctrl-single,pins = <
+ 0x104 0x2 /* UART2_RXD (IOMG96) */
+ 0x108 0x2 /* UART2_TXD (IOMG64) */
+ >;
+ };
+ uart2_pmx_idle: uart2_pmx_idle {
+ pinctrl-single,pins = <
+ 0x104 0x1 /* GPIO (IOMG96) */
+ 0x108 0x1 /* GPIO (IOMG64) */
+ >;
+ };
+ uart3_pmx_func: uart3_pmx_func {
+ pinctrl-single,pins = <
+ 0x160 0x2 /* UART3_CTS & UART3_RTS (IOMG85) */
+ 0x164 0x2 /* UART3_RXD & UART3_TXD (IOMG86) */
+ >;
+ };
+ uart3_pmx_idle: uart3_pmx_idle {
+ pinctrl-single,pins = <
+ 0x160 0x1 /* GPIO (IOMG85) */
+ 0x164 0x1 /* GPIO (IOMG86) */
+ >;
+ };
+ uart4_pmx_func: uart4_pmx_func {
+ pinctrl-single,pins = <
+ 0x168 0x0 /* UART4_CTS & UART4_RTS (IOMG87) */
+ 0x16c 0x0 /* UART4_RXD (IOMG88) */
+ 0x170 0x0 /* UART4_TXD (IOMG93) */
+ >;
+ };
+ uart4_pmx_idle: uart4_pmx_idle {
+ pinctrl-single,pins = <
+ 0x168 0x1 /* GPIO (IOMG87) */
+ 0x16c 0x1 /* GPIO (IOMG88) */
+ 0x170 0x1 /* GPIO (IOMG93) */
+ >;
+ };
+ i2c0_pmx_func: i2c0_pmx_func {
+ pinctrl-single,pins = <
+ 0x0b4 0x0 /* I2C0_SCL & I2C0_SDA (IOMG45) */
+ >;
+ };
+ i2c0_pmx_idle: i2c0_pmx_idle {
+ pinctrl-single,pins = <
+ 0x0b4 0x1 /* GPIO (IOMG45) */
+ >;
+ };
+ i2c1_pmx_func: i2c1_pmx_func {
+ pinctrl-single,pins = <
+ 0x0b8 0x0 /* I2C1_SCL & I2C1_SDA (IOMG46) */
+ >;
+ };
+ i2c1_pmx_idle: i2c1_pmx_idle {
+ pinctrl-single,pins = <
+ 0x0b8 0x1 /* GPIO (IOMG46) */
+ >;
+ };
+ i2c2_pmx_func: i2c2_pmx_func {
+ pinctrl-single,pins = <
+ 0x068 0x0 /* I2C2_SCL (IOMG26) */
+ 0x06c 0x0 /* I2C2_SDA (IOMG27) */
+ >;
+ };
+ i2c2_pmx_idle: i2c2_pmx_idle {
+ pinctrl-single,pins = <
+ 0x068 0x1 /* GPIO (IOMG26) */
+ 0x06c 0x1 /* GPIO (IOMG27) */
+ >;
+ };
+ i2c3_pmx_func: i2c3_pmx_func {
+ pinctrl-single,pins = <
+ 0x050 0x2 /* I2C3_SCL (IOMG20) */
+ 0x054 0x2 /* I2C3_SDA (IOMG21) */
+ >;
+ };
+ i2c3_pmx_idle: i2c3_pmx_idle {
+ pinctrl-single,pins = <
+ 0x050 0x1 /* GPIO (IOMG20) */
+ 0x054 0x1 /* GPIO (IOMG21) */
+ >;
+ };
+ spi0_pmx_func: spi0_pmx_func {
+ pinctrl-single,pins = <
+ 0x0d4 0x0 /* SPI0_CLK/SPI0_DI/SPI0_DO (IOMG53) */
+ 0x0d8 0x0 /* SPI0_CS0 (IOMG54) */
+ 0x0dc 0x0 /* SPI0_CS1 (IOMG55) */
+ 0x0e0 0x0 /* SPI0_CS2 (IOMG56) */
+ 0x0e4 0x0 /* SPI0_CS3 (IOMG57) */
+ >;
+ };
+ spi0_pmx_idle: spi0_pmx_idle {
+ pinctrl-single,pins = <
+ 0x0d4 0x1 /* GPIO (IOMG53) */
+ 0x0d8 0x1 /* GPIO (IOMG54) */
+ 0x0dc 0x1 /* GPIO (IOMG55) */
+ 0x0e0 0x1 /* GPIO (IOMG56) */
+ 0x0e4 0x1 /* GPIO (IOMG57) */
+ >;
+ };
+ spi1_pmx_func: spi1_pmx_func {
+ pinctrl-single,pins = <
+ 0x184 0x0 /* SPI1_CLK/SPI1_DI (IOMG98) */
+ 0x0e8 0x0 /* SPI1_DO (IOMG58) */
+ 0x0ec 0x0 /* SPI1_CS (IOMG95) */
+ >;
+ };
+ spi1_pmx_idle: spi1_pmx_idle {
+ pinctrl-single,pins = <
+ 0x184 0x1 /* GPIO (IOMG98) */
+ 0x0e8 0x1 /* GPIO (IOMG58) */
+ 0x0ec 0x1 /* GPIO (IOMG95) */
+ >;
+ };
+ kpc_pmx_func: kpc_pmx_func {
+ pinctrl-single,pins = <
+ 0x12c 0x0 /* KEY_IN0 (IOMG73) */
+ 0x130 0x0 /* KEY_IN1 (IOMG74) */
+ 0x134 0x0 /* KEY_IN2 (IOMG75) */
+ 0x10c 0x0 /* KEY_OUT0 (IOMG65) */
+ 0x110 0x0 /* KEY_OUT1 (IOMG66) */
+ 0x114 0x0 /* KEY_OUT2 (IOMG67) */
+ >;
+ };
+ kpc_pmx_idle: kpc_pmx_idle {
+ pinctrl-single,pins = <
+ 0x12c 0x1 /* GPIO (IOMG73) */
+ 0x130 0x1 /* GPIO (IOMG74) */
+ 0x134 0x1 /* GPIO (IOMG75) */
+ 0x10c 0x1 /* GPIO (IOMG65) */
+ 0x110 0x1 /* GPIO (IOMG66) */
+ 0x114 0x1 /* GPIO (IOMG67) */
+ >;
+ };
+ gpio_key_func: gpio_key_func {
+ pinctrl-single,pins = <
+ 0x10c 0x1 /* KEY_OUT0/GPIO (IOMG65) */
+ 0x130 0x1 /* KEY_IN1/GPIO (IOMG74) */
+ >;
+ };
+ emmc_pmx_func: emmc_pmx_func {
+ pinctrl-single,pins = <
+ 0x030 0x2 /* eMMC_CMD/eMMC_CLK (IOMG12) */
+ 0x018 0x0 /* NAND_CS3_N (IOMG6) */
+ 0x024 0x0 /* NAND_BUSY2_N (IOMG8) */
+ 0x028 0x0 /* NAND_BUSY3_N (IOMG9) */
+ 0x02c 0x2 /* eMMC_DATA[0:7] (IOMG10) */
+ >;
+ };
+ emmc_pmx_idle: emmc_pmx_idle {
+ pinctrl-single,pins = <
+ 0x030 0x0 /* GPIO (IOMG12) */
+ 0x018 0x1 /* GPIO (IOMG6) */
+ 0x024 0x1 /* GPIO (IOMG8) */
+ 0x028 0x1 /* GPIO (IOMG9) */
+ 0x02c 0x1 /* GPIO (IOMG10) */
+ >;
+ };
+ sd_pmx_func: sd_pmx_func {
+ pinctrl-single,pins = <
+ 0x0bc 0x0 /* SD_CLK/SD_CMD/SD_DATA0/SD_DATA1/SD_DATA2 (IOMG47) */
+ 0x0c0 0x0 /* SD_DATA3 (IOMG48) */
+ >;
+ };
+ sd_pmx_idle: sd_pmx_idle {
+ pinctrl-single,pins = <
+ 0x0bc 0x1 /* GPIO (IOMG47) */
+ 0x0c0 0x1 /* GPIO (IOMG48) */
+ >;
+ };
+ nand_pmx_func: nand_pmx_func {
+ pinctrl-single,pins = <
+ 0x00c 0x0 /* NAND_ALE/NAND_CLE/.../NAND_DATA[0:7] (IOMG3) */
+ 0x010 0x0 /* NAND_CS1_N (IOMG4) */
+ 0x014 0x0 /* NAND_CS2_N (IOMG5) */
+ 0x018 0x0 /* NAND_CS3_N (IOMG6) */
+ 0x01c 0x0 /* NAND_BUSY0_N (IOMG94) */
+ 0x020 0x0 /* NAND_BUSY1_N (IOMG7) */
+ 0x024 0x0 /* NAND_BUSY2_N (IOMG8) */
+ 0x028 0x0 /* NAND_BUSY3_N (IOMG9) */
+ 0x02c 0x0 /* NAND_DATA[8:15] (IOMG10) */
+ >;
+ };
+ nand_pmx_idle: nand_pmx_idle {
+ pinctrl-single,pins = <
+ 0x00c 0x1 /* GPIO (IOMG3) */
+ 0x010 0x1 /* GPIO (IOMG4) */
+ 0x014 0x1 /* GPIO (IOMG5) */
+ 0x018 0x1 /* GPIO (IOMG6) */
+ 0x01c 0x1 /* GPIO (IOMG94) */
+ 0x020 0x1 /* GPIO (IOMG7) */
+ 0x024 0x1 /* GPIO (IOMG8) */
+ 0x028 0x1 /* GPIO (IOMG9) */
+ 0x02c 0x1 /* GPIO (IOMG10) */
+ >;
+ };
+ sdio_pmx_func: sdio_pmx_func {
+ pinctrl-single,pins = <
+ 0x0c4 0x0 /* SDIO_CLK/SDIO_CMD/SDIO_DATA[0:3] (IOMG49) */
+ >;
+ };
+ sdio_pmx_idle: sdio_pmx_idle {
+ pinctrl-single,pins = <
+ 0x0c4 0x1 /* GPIO (IOMG49) */
+ >;
+ };
+ audio_out_pmx_func: audio_out_pmx_func {
+ pinctrl-single,pins = <
+ 0x0f0 0x1 /* GPIO (IOMG59), audio spk & earphone */
+ >;
+ };
+ };
+
+ pmx1: pinmux at fc803800 {
+ pinctrl-names = "default";
+ pinctrl-0 = < &board_pu_pins &board_pd_pins &board_pd_ps_pins
+ &board_np_pins &board_ps_pins &kpc_cfg_func
+ &audio_out_cfg_func>;
+ board_pu_pins: board_pu_pins {
+ pinctrl-single,pins = <
+ 0x014 0 /* GPIO_158 (IOCFG2) */
+ 0x018 0 /* GPIO_159 (IOCFG3) */
+ 0x01c 0 /* BOOT_MODE0 (IOCFG4) */
+ 0x020 0 /* BOOT_MODE1 (IOCFG5) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <1 1 0 1>;
+ };
+ board_pd_pins: board_pd_pins {
+ pinctrl-single,pins = <
+ 0x038 0 /* eFUSE_DOUT (IOCFG11) */
+ 0x150 0 /* ISP_GPIO8 (IOCFG93) */
+ 0x154 0 /* ISP_GPIO9 (IOCFG94) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ board_pd_ps_pins: board_pd_ps_pins {
+ pinctrl-single,pins = <
+ 0x2d8 0 /* CLK_OUT0 (IOCFG190) */
+ 0x004 0 /* PMU_SPI_DATA (IOCFG192) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ board_np_pins: board_np_pins {
+ pinctrl-single,pins = <
+ 0x24c 0 /* KEYPAD_OUT7 (IOCFG155) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ board_ps_pins: board_ps_pins {
+ pinctrl-single,pins = <
+ 0x000 0 /* PMU_SPI_CLK (IOCFG191) */
+ 0x008 0 /* PMU_SPI_CS_N (IOCFG193) */
+ >;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ uart0_cfg_func: uart0_cfg_func {
+ pinctrl-single,pins = <
+ 0x208 0 /* UART0_RXD (IOCFG138) */
+ 0x20c 0 /* UART0_TXD (IOCFG139) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ uart0_cfg_idle: uart0_cfg_idle {
+ pinctrl-single,pins = <
+ 0x208 0 /* UART0_RXD (IOCFG138) */
+ 0x20c 0 /* UART0_TXD (IOCFG139) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ uart1_cfg_func: uart1_cfg_func {
+ pinctrl-single,pins = <
+ 0x210 0 /* UART1_CTS (IOCFG140) */
+ 0x214 0 /* UART1_RTS (IOCFG141) */
+ 0x218 0 /* UART1_RXD (IOCFG142) */
+ 0x21c 0 /* UART1_TXD (IOCFG143) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ uart1_cfg_idle: uart1_cfg_idle {
+ pinctrl-single,pins = <
+ 0x210 0 /* UART1_CTS (IOCFG140) */
+ 0x214 0 /* UART1_RTS (IOCFG141) */
+ 0x218 0 /* UART1_RXD (IOCFG142) */
+ 0x21c 0 /* UART1_TXD (IOCFG143) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ uart2_cfg_func: uart2_cfg_func {
+ pinctrl-single,pins = <
+ 0x220 0 /* UART2_CTS (IOCFG144) */
+ 0x224 0 /* UART2_RTS (IOCFG145) */
+ 0x228 0 /* UART2_RXD (IOCFG146) */
+ 0x22c 0 /* UART2_TXD (IOCFG147) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ uart2_cfg_idle: uart2_cfg_idle {
+ pinctrl-single,pins = <
+ 0x220 0 /* GPIO (IOCFG144) */
+ 0x224 0 /* GPIO (IOCFG145) */
+ 0x228 0 /* GPIO (IOCFG146) */
+ 0x22c 0 /* GPIO (IOCFG147) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ uart3_cfg_func: uart3_cfg_func {
+ pinctrl-single,pins = <
+ 0x294 0 /* UART3_CTS (IOCFG173) */
+ 0x298 0 /* UART3_RTS (IOCFG174) */
+ 0x29c 0 /* UART3_RXD (IOCFG175) */
+ 0x2a0 0 /* UART3_TXD (IOCFG176) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ uart3_cfg_idle: uart3_cfg_idle {
+ pinctrl-single,pins = <
+ 0x294 0 /* UART3_CTS (IOCFG173) */
+ 0x298 0 /* UART3_RTS (IOCFG174) */
+ 0x29c 0 /* UART3_RXD (IOCFG175) */
+ 0x2a0 0 /* UART3_TXD (IOCFG176) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ uart4_cfg_func: uart4_cfg_func {
+ pinctrl-single,pins = <
+ 0x2a4 0 /* UART4_CTS (IOCFG177) */
+ 0x2a8 0 /* UART4_RTS (IOCFG178) */
+ 0x2ac 0 /* UART4_RXD (IOCFG179) */
+ 0x2b0 0 /* UART4_TXD (IOCFG180) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ i2c0_cfg_func: i2c0_cfg_func {
+ pinctrl-single,pins = <
+ 0x17c 0 /* I2C0_SCL (IOCFG103) */
+ 0x180 0 /* I2C0_SDA (IOCFG104) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ i2c1_cfg_func: i2c1_cfg_func {
+ pinctrl-single,pins = <
+ 0x184 0 /* I2C1_SCL (IOCFG105) */
+ 0x188 0 /* I2C1_SDA (IOCFG106) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ i2c2_cfg_func: i2c2_cfg_func {
+ pinctrl-single,pins = <
+ 0x118 0 /* I2C2_SCL (IOCFG79) */
+ 0x11c 0 /* I2C2_SDA (IOCFG80) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ i2c3_cfg_func: i2c3_cfg_func {
+ pinctrl-single,pins = <
+ 0x100 0 /* I2C3_SCL (IOCFG73) */
+ 0x104 0 /* I2C3_SDA (IOCFG74) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ spi0_cfg_func1: spi0_cfg_func1 {
+ pinctrl-single,pins = <
+ 0x1d4 0 /* SPI0_CLK (IOCFG125) */
+ 0x1d8 0 /* SPI0_DI (IOCFG126) */
+ 0x1dc 0 /* SPI0_DO (IOCFG127) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ spi0_cfg_func2: spi0_cfg_func2 {
+ pinctrl-single,pins = <
+ 0x1e0 0 /* SPI0_CS0 (IOCFG128) */
+ 0x1e4 0 /* SPI0_CS1 (IOCFG129) */
+ 0x1e8 0 /* SPI0_CS2 (IOCFG130 */
+ 0x1ec 0 /* SPI0_CS3 (IOCFG131) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <1 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ spi1_cfg_func1: spi1_cfg_func1 {
+ pinctrl-single,pins = <
+ 0x1f0 0 /* SPI1_CLK (IOCFG132) */
+ 0x1f4 0 /* SPI1_DI (IOCFG133) */
+ 0x1f8 0 /* SPI1_DO (IOCFG134) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ spi1_cfg_func2: spi1_cfg_func2 {
+ pinctrl-single,pins = <
+ 0x1fc 0 /* SPI1_CS (IOCFG135) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <1 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ kpc_cfg_func: kpc_cfg_func {
+ pinctrl-single,pins = <
+ 0x250 0 /* KEY_IN0 (IOCFG156) */
+ 0x254 0 /* KEY_IN1 (IOCFG157) */
+ 0x258 0 /* KEY_IN2 (IOCFG158) */
+ 0x230 0 /* KEY_OUT0 (IOCFG148) */
+ 0x234 0 /* KEY_OUT1 (IOCFG149) */
+ 0x238 0 /* KEY_OUT2 (IOCFG150) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ emmc_cfg_func: emmc_cfg_func {
+ pinctrl-single,pins = <
+ 0x0ac 0 /* eMMC_CMD (IOCFG40) */
+ 0x0b0 0 /* eMMC_CLK (IOCFG41) */
+ 0x058 0 /* NAND_CS3_N (IOCFG19) */
+ 0x064 0 /* NAND_BUSY2_N (IOCFG22) */
+ 0x068 0 /* NAND_BUSY3_N (IOCFG23) */
+ 0x08c 0 /* NAND_DATA8 (IOCFG32) */
+ 0x090 0 /* NAND_DATA9 (IOCFG33) */
+ 0x094 0 /* NAND_DATA10 (IOCFG34) */
+ 0x098 0 /* NAND_DATA11 (IOCFG35) */
+ 0x09c 0 /* NAND_DATA12 (IOCFG36) */
+ 0x0a0 0 /* NAND_DATA13 (IOCFG37) */
+ 0x0a4 0 /* NAND_DATA14 (IOCFG38) */
+ 0x0a8 0 /* NAND_DATA15 (IOCFG39) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <1 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ sd_cfg_func1: sd_cfg_func1 {
+ pinctrl-single,pins = <
+ 0x18c 0 /* SD_CLK (IOCFG107) */
+ 0x190 0 /* SD_CMD (IOCFG108) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ sd_cfg_func2: sd_cfg_func2 {
+ pinctrl-single,pins = <
+ 0x194 0 /* SD_DATA0 (IOCFG109) */
+ 0x198 0 /* SD_DATA1 (IOCFG110) */
+ 0x19c 0 /* SD_DATA2 (IOCFG111) */
+ 0x1a0 0 /* SD_DATA3 (IOCFG112) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x70 0xf0>;
+ };
+ nand_cfg_func1: nand_cfg_func1 {
+ pinctrl-single,pins = <
+ 0x03c 0 /* NAND_ALE (IOCFG12) */
+ 0x040 0 /* NAND_CLE (IOCFG13) */
+ 0x06c 0 /* NAND_DATA0 (IOCFG24) */
+ 0x070 0 /* NAND_DATA1 (IOCFG25) */
+ 0x074 0 /* NAND_DATA2 (IOCFG26) */
+ 0x078 0 /* NAND_DATA3 (IOCFG27) */
+ 0x07c 0 /* NAND_DATA4 (IOCFG28) */
+ 0x080 0 /* NAND_DATA5 (IOCFG29) */
+ 0x084 0 /* NAND_DATA6 (IOCFG30) */
+ 0x088 0 /* NAND_DATA7 (IOCFG31) */
+ 0x08c 0 /* NAND_DATA8 (IOCFG32) */
+ 0x090 0 /* NAND_DATA9 (IOCFG33) */
+ 0x094 0 /* NAND_DATA10 (IOCFG34) */
+ 0x098 0 /* NAND_DATA11 (IOCFG35) */
+ 0x09c 0 /* NAND_DATA12 (IOCFG36) */
+ 0x0a0 0 /* NAND_DATA13 (IOCFG37) */
+ 0x0a4 0 /* NAND_DATA14 (IOCFG38) */
+ 0x0a8 0 /* NAND_DATA15 (IOCFG39) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ nand_cfg_func2: nand_cfg_func2 {
+ pinctrl-single,pins = <
+ 0x044 0 /* NAND_RE_N (IOCFG14) */
+ 0x048 0 /* NAND_WE_N (IOCFG15) */
+ 0x04c 0 /* NAND_CS0_N (IOCFG16) */
+ 0x050 0 /* NAND_CS1_N (IOCFG17) */
+ 0x054 0 /* NAND_CS2_N (IOCFG18) */
+ 0x058 0 /* NAND_CS3_N (IOCFG19) */
+ 0x05c 0 /* NAND_BUSY0_N (IOCFG20) */
+ 0x060 0 /* NAND_BUSY1_N (IOCFG21) */
+ 0x064 0 /* NAND_BUSY2_N (IOCFG22) */
+ 0x068 0 /* NAND_BUSY3_N (IOCFG23) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <1 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ sdio_cfg_func: sdio_cfg_func {
+ pinctrl-single,pins = <
+ 0x1a4 0 /* SDIO0_CLK (IOCG113) */
+ 0x1a8 0 /* SDIO0_CMD (IOCG114) */
+ 0x1ac 0 /* SDIO0_DATA0 (IOCG115) */
+ 0x1b0 0 /* SDIO0_DATA1 (IOCG116) */
+ 0x1b4 0 /* SDIO0_DATA2 (IOCG117) */
+ 0x1b8 0 /* SDIO0_DATA3 (IOCG118) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ audio_out_cfg_func: audio_out_cfg_func {
+ pinctrl-single,pins = <
+ 0x200 0 /* GPIO (IOCFG136) */
+ 0x204 0 /* GPIO (IOCFG137) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ call {
+ label = "call";
+ gpios = <&gpio17 2 0>;
+ linux,code = <169>; /* KEY_PHONE */
+ };
+ };
+};
--
1.8.1.2
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v9 4/7] ARM: config: enable hi3xxx in multi_v7_defconfig
2013-08-28 13:10 [PATCH v9 0/7] enable hi3xxx SoC Haojian Zhuang
` (2 preceding siblings ...)
2013-08-28 13:10 ` [PATCH v9 3/7] ARM: dts: enable hi4511 " Haojian Zhuang
@ 2013-08-28 13:10 ` Haojian Zhuang
2013-08-28 13:10 ` [PATCH v9 5/7] ARM: config: add defconfig for Hi3xxx Haojian Zhuang
` (2 subsequent siblings)
6 siblings, 0 replies; 13+ messages in thread
From: Haojian Zhuang @ 2013-08-28 13:10 UTC (permalink / raw)
To: linux-arm-kernel
Enable ARCH_HI3xxx in multi_v7_defconfig.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
arch/arm/configs/multi_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index fe0bdc3..c7b5247 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -8,6 +8,7 @@ CONFIG_MACH_ARMADA_XP=y
CONFIG_ARCH_BCM=y
CONFIG_GPIO_PCA953X=y
CONFIG_ARCH_HIGHBANK=y
+CONFIG_ARCH_HI3xxx=y
CONFIG_ARCH_KEYSTONE=y
CONFIG_ARCH_MXC=y
CONFIG_MACH_IMX51_DT=y
--
1.8.1.2
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v9 5/7] ARM: config: add defconfig for Hi3xxx
2013-08-28 13:10 [PATCH v9 0/7] enable hi3xxx SoC Haojian Zhuang
` (3 preceding siblings ...)
2013-08-28 13:10 ` [PATCH v9 4/7] ARM: config: enable hi3xxx in multi_v7_defconfig Haojian Zhuang
@ 2013-08-28 13:10 ` Haojian Zhuang
2013-08-28 13:10 ` [PATCH v9 6/7] ARM: hi3xxx: add smp support Haojian Zhuang
2013-08-28 13:10 ` [PATCH v9 7/7] ARM: hi3xxx: add hotplug support Haojian Zhuang
6 siblings, 0 replies; 13+ messages in thread
From: Haojian Zhuang @ 2013-08-28 13:10 UTC (permalink / raw)
To: linux-arm-kernel
Add default config for arch-hi3xxx. It's used for Hisilicon Hi3xxx SoC.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
arch/arm/configs/hi3xxx_defconfig | 56 +++++++++++++++++++++++++++++++++++++++
1 file changed, 56 insertions(+)
create mode 100644 arch/arm/configs/hi3xxx_defconfig
diff --git a/arch/arm/configs/hi3xxx_defconfig b/arch/arm/configs/hi3xxx_defconfig
new file mode 100644
index 0000000..f186bdf
--- /dev/null
+++ b/arch/arm/configs/hi3xxx_defconfig
@@ -0,0 +1,56 @@
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_RD_LZMA=y
+CONFIG_ARCH_HI3xxx=y
+CONFIG_SMP=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_NETDEVICES=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_DRM=y
+CONFIG_FB_SIMPLE=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_STORAGE=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_MMC=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_PL031=y
+CONFIG_DMADEVICES=y
+CONFIG_DW_DMAC=y
+CONFIG_PL330_DMA=y
+CONFIG_PWM=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOCKUP_DETECTOR=y
--
1.8.1.2
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v9 6/7] ARM: hi3xxx: add smp support
2013-08-28 13:10 [PATCH v9 0/7] enable hi3xxx SoC Haojian Zhuang
` (4 preceding siblings ...)
2013-08-28 13:10 ` [PATCH v9 5/7] ARM: config: add defconfig for Hi3xxx Haojian Zhuang
@ 2013-08-28 13:10 ` Haojian Zhuang
2013-08-29 18:24 ` Kevin Hilman
2013-08-28 13:10 ` [PATCH v9 7/7] ARM: hi3xxx: add hotplug support Haojian Zhuang
6 siblings, 1 reply; 13+ messages in thread
From: Haojian Zhuang @ 2013-08-28 13:10 UTC (permalink / raw)
To: linux-arm-kernel
From: Zhangfei Gao <zhangfei.gao@linaro.org>
Enable SMP support on hi3xxx platform
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Tested-by: Zhang Mingjun <zhang.mingjun@linaro.org>
Tested-by: Li Xin <li.xin@linaro.org>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
.../bindings/arm/hisilicon/hisilicon.txt | 50 +++++++++++++++++
arch/arm/boot/dts/hi3620-clk.dtsi | 4 ++
arch/arm/boot/dts/hi3620.dtsi | 27 +++++++++
arch/arm/mach-hi3xxx/Kconfig | 2 +
arch/arm/mach-hi3xxx/Makefile | 3 +-
arch/arm/mach-hi3xxx/core.h | 13 +++++
arch/arm/mach-hi3xxx/hi3xxx.c | 5 ++
arch/arm/mach-hi3xxx/platsmp.c | 43 ++++++++++++++
arch/arm/mach-hi3xxx/system.c | 65 ++++++++++++++++++++++
9 files changed, 211 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/mach-hi3xxx/core.h
create mode 100644 arch/arm/mach-hi3xxx/platsmp.c
create mode 100644 arch/arm/mach-hi3xxx/system.c
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
index 3be60c8..1462903 100644
--- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
+++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
@@ -8,3 +8,53 @@ Required root node properties:
Hi4511 Board
Required root node properties:
- compatible = "hisilicon,hi3620-hi4511";
+
+
+Hisilicon system controller
+
+Required properties:
+- compatible : "hisilicon,sysctrl"
+- reg : Register address and size
+
+Optional properties:
+- smp-off : offset in sysctrl for notifying slave cpu booting
+ cpu 1, reg;
+ cpu 2, reg + 0x4;
+ cpu 3, reg + 0x8;
+ If reg value is not zero, cpun exit wfi and go
+- resume-off : offset in sysctrl for notifying cpu0 when resume
+- reboot-off : offset in sysctrl for system reboot
+
+Example:
+
+ /* for Hi3716 */
+ sysctrl: system-controller at f8000000 {
+ compatible = "hisilicon,sysctrl";
+ reg = <0xf8000000 0x1000>;
+ smp-off = <0xc0>;
+ reboot-off = <0x4>;
+ };
+
+ /* for Hi3620 */
+ sysctrl: system-controller at fc802000 {
+ compatible = "hisilicon,sysctrl";
+ reg = <0xfc802000 0x1000>;
+ smp-off = <0x31c>;
+ resume-off = <0x308>;
+ reboot-off = <0x4>;
+ };
+
+Hi3716 cpuctrl register
+Hi3716 specific cpuctrl register, control power & clock of cpu and module.
+
+Required properties:
+- compatible : "hisilicon,hi3716-cpuctrl"
+- reg : register address and size
+
+Example:
+
+ /* for Hi3716 */
+ cpuctrl at f8a22000 {
+ compatible = "hisilicon,hi3716-cpuctrl";
+ reg = <0xf8a22000 0x2000>;
+ };
diff --git a/arch/arm/boot/dts/hi3620-clk.dtsi b/arch/arm/boot/dts/hi3620-clk.dtsi
index 78307c6..78a2a8bf 100644
--- a/arch/arm/boot/dts/hi3620-clk.dtsi
+++ b/arch/arm/boot/dts/hi3620-clk.dtsi
@@ -102,6 +102,10 @@
#address-cells = <1>;
#size-cells = <0>;
+ smp-off = <0x31c>;
+ resume-off = <0x308>;
+ reboot-off = <0x4>;
+
timer0_mux: timer0_mux {
compatible = "hisilicon,clk-mux";
#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi
index e05c65c..03c816c 100644
--- a/arch/arm/boot/dts/hi3620.dtsi
+++ b/arch/arm/boot/dts/hi3620.dtsi
@@ -34,6 +34,27 @@
reg = <0x0>;
next-level-cache = <&L2>;
};
+
+ cpu at 1 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu at 2 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <2>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu at 3 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <3>;
+ next-level-cache = <&L2>;
+ };
};
amba {
@@ -110,6 +131,12 @@
status = "disabled";
};
+ timer5: timer at fc000600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0xfc000600 0x20>;
+ interrupts = <1 13 0xf01>;
+ };
+
uart0: uart at fcb00000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xfcb00000 0x1000>;
diff --git a/arch/arm/mach-hi3xxx/Kconfig b/arch/arm/mach-hi3xxx/Kconfig
index 68bd26c..d2e7d57 100644
--- a/arch/arm/mach-hi3xxx/Kconfig
+++ b/arch/arm/mach-hi3xxx/Kconfig
@@ -6,6 +6,8 @@ config ARCH_HI3xxx
select CACHE_L2X0
select CLKSRC_OF
select GENERIC_CLOCKEVENTS
+ select HAVE_ARM_SCU
+ select HAVE_SMP
select PINCTRL
select PINCTRL_SINGLE
help
diff --git a/arch/arm/mach-hi3xxx/Makefile b/arch/arm/mach-hi3xxx/Makefile
index d68ebb3..0917f1c 100644
--- a/arch/arm/mach-hi3xxx/Makefile
+++ b/arch/arm/mach-hi3xxx/Makefile
@@ -2,4 +2,5 @@
# Makefile for Hisilicon Hi36xx/Hi37xx processors line
#
-obj-y += hi3xxx.o
+obj-y += hi3xxx.o system.o
+obj-$(CONFIG_SMP) += platsmp.o
diff --git a/arch/arm/mach-hi3xxx/core.h b/arch/arm/mach-hi3xxx/core.h
new file mode 100644
index 0000000..3a9c50a
--- /dev/null
+++ b/arch/arm/mach-hi3xxx/core.h
@@ -0,0 +1,13 @@
+#ifndef __HISILICON_CORE_H
+#define __HISILICON_CORE_H
+
+#include <linux/reboot.h>
+
+extern void hs_set_cpu_jump(int cpu, void *jump_addr);
+extern int hs_get_cpu_jump(int cpu);
+extern void secondary_startup(void);
+extern void hs_map_io(void);
+extern void hs_restart(enum reboot_mode, const char *cmd);
+extern struct smp_operations hs_smp_ops;
+
+#endif
diff --git a/arch/arm/mach-hi3xxx/hi3xxx.c b/arch/arm/mach-hi3xxx/hi3xxx.c
index e7c54bc..567a0d5 100644
--- a/arch/arm/mach-hi3xxx/hi3xxx.c
+++ b/arch/arm/mach-hi3xxx/hi3xxx.c
@@ -19,8 +19,11 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include "core.h"
+
static void __init hi3xxx_timer_init(void)
{
+ hs_map_io();
of_clk_init(NULL);
clocksource_of_init();
}
@@ -33,4 +36,6 @@ static const char *hs_compat[] __initdata = {
DT_MACHINE_START(HI3xxx, "Hisilicon Hi36xx/Hi37xx (Flattened Device Tree)")
.init_time = hi3xxx_timer_init,
.dt_compat = hs_compat,
+ .smp = smp_ops(hs_smp_ops),
+ .restart = hs_restart,
MACHINE_END
diff --git a/arch/arm/mach-hi3xxx/platsmp.c b/arch/arm/mach-hi3xxx/platsmp.c
new file mode 100644
index 0000000..a76a3cc
--- /dev/null
+++ b/arch/arm/mach-hi3xxx/platsmp.c
@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2013 Linaro Ltd.
+ * Copyright (c) 2013 Hisilicon Limited.
+ * Based on platsmp.c, Copyright (C) 2002 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <asm/smp_scu.h>
+
+#include "core.h"
+
+static void __init hs_smp_prepare_cpus(unsigned int max_cpus)
+{
+ unsigned long base;
+ void __iomem *scu_base;
+
+ if (scu_a9_has_base()) {
+ base = scu_a9_get_base();
+ scu_base = ioremap(base, SZ_4K);
+ if (!scu_base) {
+ pr_err("ioremap(scu_base) failed\n");
+ return;
+ }
+ scu_enable(scu_base);
+ iounmap(scu_base);
+ }
+}
+
+static int hs_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ hs_set_cpu_jump(cpu, secondary_startup);
+ arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+ return 0;
+}
+
+struct smp_operations hs_smp_ops __initdata = {
+ .smp_prepare_cpus = hs_smp_prepare_cpus,
+ .smp_boot_secondary = hs_boot_secondary,
+};
diff --git a/arch/arm/mach-hi3xxx/system.c b/arch/arm/mach-hi3xxx/system.c
new file mode 100644
index 0000000..1276398
--- /dev/null
+++ b/arch/arm/mach-hi3xxx/system.c
@@ -0,0 +1,65 @@
+/*
+ * Copyright (c) 2013 Linaro Ltd.
+ * Copyright (c) 2013 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+
+#include <asm/proc-fns.h>
+#include <asm/smp_plat.h>
+
+#include "core.h"
+
+static void __iomem *hs_sysctrl_base;
+static int hs_smp_reg;
+static int hs_resume_reg;
+static int hs_reboot_reg;
+
+void hs_map_io(void)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "hisilicon,sysctrl");
+ if (np) {
+ hs_sysctrl_base = of_iomap(np, 0);
+ if (!hs_sysctrl_base)
+ pr_err("of_iomap(sysctrl_base) failed\n");
+ of_property_read_u32(np, "smp-off", &hs_smp_reg);
+ of_property_read_u32(np, "resume-off", &hs_resume_reg);
+ of_property_read_u32(np, "reboot-off", &hs_reboot_reg);
+ }
+}
+
+void hs_set_cpu_jump(int cpu, void *jump_addr)
+{
+ int offset = hs_smp_reg;
+
+ cpu = cpu_logical_map(cpu);
+ if (cpu > 0)
+ offset += 0x04 * (cpu - 1);
+ writel_relaxed(virt_to_phys(jump_addr), hs_sysctrl_base + offset);
+}
+
+int hs_get_cpu_jump(int cpu)
+{
+ int offset = hs_smp_reg;
+
+ cpu = cpu_logical_map(cpu);
+ if (cpu > 0)
+ offset += 0x04 * (cpu - 1);
+ return readl_relaxed(hs_sysctrl_base + offset);
+}
+
+void hs_restart(enum reboot_mode mode, const char *cmd)
+{
+ writel_relaxed(0xdeadbeef, hs_sysctrl_base + hs_reboot_reg);
+
+ while (1)
+ cpu_do_idle();
+}
+
--
1.8.1.2
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v9 7/7] ARM: hi3xxx: add hotplug support
2013-08-28 13:10 [PATCH v9 0/7] enable hi3xxx SoC Haojian Zhuang
` (5 preceding siblings ...)
2013-08-28 13:10 ` [PATCH v9 6/7] ARM: hi3xxx: add smp support Haojian Zhuang
@ 2013-08-28 13:10 ` Haojian Zhuang
6 siblings, 0 replies; 13+ messages in thread
From: Haojian Zhuang @ 2013-08-28 13:10 UTC (permalink / raw)
To: linux-arm-kernel
From: Zhangfei Gao <zhangfei.gao@linaro.org>
Enable hotplug support on hi3xxx platform
How to test:
cat proc/interrupts
echo 0 > /sys/devices/system/cpu/cpuX/online
cat proc/interrupts
echo 1 > /sys/devices/system/cpu/cpuX/online
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Tested-by: Zhang Mingjun <zhang.mingjun@linaro.org>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
arch/arm/mach-hi3xxx/Makefile | 1 +
arch/arm/mach-hi3xxx/core.h | 5 ++
arch/arm/mach-hi3xxx/hi3xxx.c | 1 +
arch/arm/mach-hi3xxx/hotplug.c | 168 +++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-hi3xxx/platsmp.c | 5 ++
5 files changed, 180 insertions(+)
create mode 100644 arch/arm/mach-hi3xxx/hotplug.c
diff --git a/arch/arm/mach-hi3xxx/Makefile b/arch/arm/mach-hi3xxx/Makefile
index 0917f1c..c597cbf 100644
--- a/arch/arm/mach-hi3xxx/Makefile
+++ b/arch/arm/mach-hi3xxx/Makefile
@@ -4,3 +4,4 @@
obj-y += hi3xxx.o system.o
obj-$(CONFIG_SMP) += platsmp.o
+obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
diff --git a/arch/arm/mach-hi3xxx/core.h b/arch/arm/mach-hi3xxx/core.h
index 3a9c50a..095d1d4 100644
--- a/arch/arm/mach-hi3xxx/core.h
+++ b/arch/arm/mach-hi3xxx/core.h
@@ -10,4 +10,9 @@ extern void hs_map_io(void);
extern void hs_restart(enum reboot_mode, const char *cmd);
extern struct smp_operations hs_smp_ops;
+extern void __init hs_hotplug_init(void);
+extern void hs_cpu_die(unsigned int cpu);
+extern int hs_cpu_kill(unsigned int cpu);
+extern void hs_set_cpu(int cpu, bool enable);
+
#endif
diff --git a/arch/arm/mach-hi3xxx/hi3xxx.c b/arch/arm/mach-hi3xxx/hi3xxx.c
index 567a0d5..01ac68b 100644
--- a/arch/arm/mach-hi3xxx/hi3xxx.c
+++ b/arch/arm/mach-hi3xxx/hi3xxx.c
@@ -24,6 +24,7 @@
static void __init hi3xxx_timer_init(void)
{
hs_map_io();
+ hs_hotplug_init();
of_clk_init(NULL);
clocksource_of_init();
}
diff --git a/arch/arm/mach-hi3xxx/hotplug.c b/arch/arm/mach-hi3xxx/hotplug.c
new file mode 100644
index 0000000..3262788
--- /dev/null
+++ b/arch/arm/mach-hi3xxx/hotplug.c
@@ -0,0 +1,168 @@
+/*
+ * Copyright (c) 2013 Linaro Ltd.
+ * Copyright (c) 2013 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+#include <linux/cpu.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
+#include "core.h"
+
+enum {
+ HI3620_CTRL,
+ HI3716_CTRL,
+};
+
+static void __iomem *ctrl_base;
+static int id;
+
+static void hs_set_cpu_hi3620(int cpu, bool enable)
+{
+ u32 val = 0;
+
+ if (enable) {
+ /* MTCMOS set */
+ writel_relaxed(0x8 << cpu, ctrl_base + 0xd0);
+ /* unreset */
+ writel_relaxed(0x1011 << cpu, ctrl_base + 0x414);
+ /* reset */
+ writel_relaxed(0x401011 << cpu, ctrl_base + 0x410);
+
+ /* ISO disable */
+ writel(0x8 << cpu, ctrl_base + 0xc4);
+
+ /* WFI Mask */
+ val = readl(ctrl_base + 0x200);
+ val &= ~(0x10000000 << cpu);
+ writel(val, ctrl_base + 0x200);
+
+ /* Enable core */
+ writel_relaxed(0x01 << cpu, ctrl_base + 0xf4);
+ /* Unreset */
+ writel_relaxed(0x401011 << cpu, ctrl_base + 0x414);
+ } else {
+ /* iso enable */
+ writel_relaxed(0x8 << cpu, ctrl_base + 0xc0);
+
+ /* MTCMOS unset */
+ writel_relaxed(0x8 << cpu, ctrl_base + 0xd4);
+
+ /* wfi mask */
+ val = readl_relaxed(ctrl_base + 0x200);
+ val |= (0x10000000 << cpu);
+ writel_relaxed(val, ctrl_base + 0x200);
+
+ /* disable core*/
+ writel_relaxed(0x01 << cpu, ctrl_base + 0xf8);
+ /* reset */
+ writel_relaxed(0x401011 << cpu, ctrl_base + 0x410);
+ }
+}
+
+static void hs_set_cpu_hi3716(int cpu, bool enable)
+{
+ u32 val = 0;
+
+ if (enable) {
+ /* power on cpu1 */
+ val = readl_relaxed(ctrl_base + 0x1000);
+ val &= ~(0x1 << 8);
+ val |= (0x1 << 7);
+ val &= ~(0x1 << 3);
+ writel_relaxed(val, ctrl_base + 0x1000);
+
+ /* unreset */
+ val = readl_relaxed(ctrl_base + 0x50);
+ val &= ~(0x1 << 17);
+ writel_relaxed(val, ctrl_base + 0x50);
+ } else {
+ /* power down cpu1 */
+ val = readl_relaxed(ctrl_base + 0x1000);
+ val &= ~(0x1 << 8);
+ val |= (0x1 << 7);
+ val |= (0x1 << 3);
+ writel_relaxed(val, ctrl_base + 0x1000);
+
+ /* reset */
+ val = readl_relaxed(ctrl_base + 0x50);
+ val |= (0x1 << 17);
+ writel_relaxed(val, ctrl_base + 0x50);
+ }
+}
+
+void hs_set_cpu(int cpu, bool enable)
+{
+ if (!ctrl_base)
+ return;
+
+ if (id == HI3620_CTRL)
+ hs_set_cpu_hi3620(cpu, enable);
+ else if (id == HI3716_CTRL)
+ hs_set_cpu_hi3716(cpu, enable);
+}
+
+void __init hs_hotplug_init(void)
+{
+ struct device_node *node;
+
+ node = of_find_compatible_node(NULL, NULL, "hisilicon,hi3716-cpuctrl");
+ if (node) {
+ ctrl_base = of_iomap(node, 0);
+ id = HI3716_CTRL;
+ return;
+ }
+ node = of_find_compatible_node(NULL, NULL, "hisilicon,sysctrl");
+ if (node) {
+ ctrl_base = of_iomap(node, 0);
+ id = HI3620_CTRL;
+ return;
+ }
+}
+
+static inline void cpu_enter_lowpower(void)
+{
+ unsigned int v;
+
+ flush_cache_all();
+
+ /*
+ * Turn off coherency and L1 D-cache
+ */
+ asm volatile(
+ " mrc p15, 0, %0, c1, c0, 1\n"
+ " bic %0, %0, #0x40\n"
+ " mcr p15, 0, %0, c1, c0, 1\n"
+ " mrc p15, 0, %0, c1, c0, 0\n"
+ " bic %0, %0, #0x04\n"
+ " mcr p15, 0, %0, c1, c0, 0\n"
+ : "=&r" (v)
+ : "r" (0)
+ : "cc");
+}
+
+void hs_cpu_die(unsigned int cpu)
+{
+ cpu_enter_lowpower();
+ hs_set_cpu_jump(cpu, phys_to_virt(0));
+ cpu_do_idle();
+
+ /* We should have never returned from idle */
+ panic("cpu %d unexpectedly exit from shutdown\n", cpu);
+}
+
+int hs_cpu_kill(unsigned int cpu)
+{
+ unsigned long timeout = jiffies + msecs_to_jiffies(50);
+
+ while (hs_get_cpu_jump(cpu))
+ if (time_after(jiffies, timeout))
+ return 0;
+ hs_set_cpu(cpu, false);
+ return 1;
+}
diff --git a/arch/arm/mach-hi3xxx/platsmp.c b/arch/arm/mach-hi3xxx/platsmp.c
index a76a3cc..6a08630 100644
--- a/arch/arm/mach-hi3xxx/platsmp.c
+++ b/arch/arm/mach-hi3xxx/platsmp.c
@@ -32,6 +32,7 @@ static void __init hs_smp_prepare_cpus(unsigned int max_cpus)
static int hs_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
+ hs_set_cpu(cpu, true);
hs_set_cpu_jump(cpu, secondary_startup);
arch_send_wakeup_ipi_mask(cpumask_of(cpu));
return 0;
@@ -40,4 +41,8 @@ static int hs_boot_secondary(unsigned int cpu, struct task_struct *idle)
struct smp_operations hs_smp_ops __initdata = {
.smp_prepare_cpus = hs_smp_prepare_cpus,
.smp_boot_secondary = hs_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = hs_cpu_die,
+ .cpu_kill = hs_cpu_kill,
+#endif
};
--
1.8.1.2
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v9 3/7] ARM: dts: enable hi4511 with device tree
2013-08-28 13:10 ` [PATCH v9 3/7] ARM: dts: enable hi4511 " Haojian Zhuang
@ 2013-08-29 18:13 ` Kevin Hilman
2013-08-30 1:19 ` Haojian Zhuang
0 siblings, 1 reply; 13+ messages in thread
From: Kevin Hilman @ 2013-08-29 18:13 UTC (permalink / raw)
To: linux-arm-kernel
Haojian Zhuang <haojian.zhuang@linaro.org> writes:
> Enable Hisilicon Hi4511 development platform with device tree support.
>
> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
This still doesn't look quite right...
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/hi3620-clk.dtsi | 1058 +++++++++++++++++++++++++++++++++++++
> arch/arm/boot/dts/hi3620.dtsi | 513 ++++++++++++++++++
> arch/arm/boot/dts/hi4511.dts | 648 +++++++++++++++++++++++
> 4 files changed, 2220 insertions(+)
> create mode 100644 arch/arm/boot/dts/hi3620-clk.dtsi
> create mode 100644 arch/arm/boot/dts/hi3620.dtsi
> create mode 100644 arch/arm/boot/dts/hi4511.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 641b3c9..6e7c1ca 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -61,6 +61,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
> exynos5250-snow.dtb \
> exynos5420-smdk5420.dtb \
> exynos5440-ssdk5440.dtb
> +dtb-$(CONFIG_ARCH_HI3xxx) += hi4511.dtb
> dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
> ecx-2000.dtb
> dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
> diff --git a/arch/arm/boot/dts/hi3620-clk.dtsi b/arch/arm/boot/dts/hi3620-clk.dtsi
> new file mode 100644
> index 0000000..78307c6
> --- /dev/null
> +++ b/arch/arm/boot/dts/hi3620-clk.dtsi
> @@ -0,0 +1,1058 @@
> +/*
> + * Hisilicon Ltd. Hi3620 SoC
> + *
> + * Copyright (C) 2012-2013 Hisilicon Ltd.
> + * Copyright (C) 2012-2013 Linaro Ltd.
> + *
> + * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * publishhed by the Free Software Foundation.
> + */
> +
> +/ {
> + clocks {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + osc32k: osc32k {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + clock-output-names = "osc32khz";
> + };
So you've now moved these all under the clocks node, but this still
isn't addressing Stephen's comments about using the
node-name at unit-address and the reg property in each node.
[...]
> + sysctrl: system-controller at fc802000 {
> + compatible = "hisilicon,sysctrl";
> + reg = <0xfc802000 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
Why is sysctrl and all of its children now under the clocks node?
Kevin
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v9 6/7] ARM: hi3xxx: add smp support
2013-08-28 13:10 ` [PATCH v9 6/7] ARM: hi3xxx: add smp support Haojian Zhuang
@ 2013-08-29 18:24 ` Kevin Hilman
0 siblings, 0 replies; 13+ messages in thread
From: Kevin Hilman @ 2013-08-29 18:24 UTC (permalink / raw)
To: linux-arm-kernel
Haojian Zhuang <haojian.zhuang@linaro.org> writes:
> From: Zhangfei Gao <zhangfei.gao@linaro.org>
>
> Enable SMP support on hi3xxx platform
>
> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
> Tested-by: Zhang Mingjun <zhang.mingjun@linaro.org>
> Tested-by: Li Xin <li.xin@linaro.org>
> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
> ---
> .../bindings/arm/hisilicon/hisilicon.txt | 50 +++++++++++++++++
New/extended bindings need review/ack from the DT maintainers. Please
be sure to Cc: devicetree at vger.kernel.org on patches with new/updated
bindings.
Kevin
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v9 3/7] ARM: dts: enable hi4511 with device tree
2013-08-29 18:13 ` Kevin Hilman
@ 2013-08-30 1:19 ` Haojian Zhuang
2013-08-30 14:44 ` Kevin Hilman
0 siblings, 1 reply; 13+ messages in thread
From: Haojian Zhuang @ 2013-08-30 1:19 UTC (permalink / raw)
To: linux-arm-kernel
On 30 August 2013 02:13, Kevin Hilman <khilman@linaro.org> wrote:
> Haojian Zhuang <haojian.zhuang@linaro.org> writes:
>
>> Enable Hisilicon Hi4511 development platform with device tree support.
>>
>> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
>
> This still doesn't look quite right...
>
>> ---
>> arch/arm/boot/dts/Makefile | 1 +
>> arch/arm/boot/dts/hi3620-clk.dtsi | 1058 +++++++++++++++++++++++++++++++++++++
>> arch/arm/boot/dts/hi3620.dtsi | 513 ++++++++++++++++++
>> arch/arm/boot/dts/hi4511.dts | 648 +++++++++++++++++++++++
>> 4 files changed, 2220 insertions(+)
>> create mode 100644 arch/arm/boot/dts/hi3620-clk.dtsi
>> create mode 100644 arch/arm/boot/dts/hi3620.dtsi
>> create mode 100644 arch/arm/boot/dts/hi4511.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 641b3c9..6e7c1ca 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -61,6 +61,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
>> exynos5250-snow.dtb \
>> exynos5420-smdk5420.dtb \
>> exynos5440-ssdk5440.dtb
>> +dtb-$(CONFIG_ARCH_HI3xxx) += hi4511.dtb
>> dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
>> ecx-2000.dtb
>> dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
>> diff --git a/arch/arm/boot/dts/hi3620-clk.dtsi b/arch/arm/boot/dts/hi3620-clk.dtsi
>> new file mode 100644
>> index 0000000..78307c6
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/hi3620-clk.dtsi
>> @@ -0,0 +1,1058 @@
>> +/*
>> + * Hisilicon Ltd. Hi3620 SoC
>> + *
>> + * Copyright (C) 2012-2013 Hisilicon Ltd.
>> + * Copyright (C) 2012-2013 Linaro Ltd.
>> + *
>> + * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * publishhed by the Free Software Foundation.
>> + */
>> +
>> +/ {
>> + clocks {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>> +
>> + osc32k: osc32k {
>> + compatible = "fixed-clock";
>> + #clock-cells = <0>;
>> + clock-frequency = <32768>;
>> + clock-output-names = "osc32khz";
>> + };
>
> So you've now moved these all under the clocks node, but this still
> isn't addressing Stephen's comments about using the
> node-name at unit-address and the reg property in each node.
>
> [...]
>
>> + sysctrl: system-controller at fc802000 {
>> + compatible = "hisilicon,sysctrl";
>> + reg = <0xfc802000 0x1000>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>
> Why is sysctrl and all of its children now under the clocks node?
>
>
> Kevin
SMP registers and clock registers are sharing the system controller.
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v9 3/7] ARM: dts: enable hi4511 with device tree
2013-08-30 1:19 ` Haojian Zhuang
@ 2013-08-30 14:44 ` Kevin Hilman
2013-09-02 8:33 ` Linus Walleij
0 siblings, 1 reply; 13+ messages in thread
From: Kevin Hilman @ 2013-08-30 14:44 UTC (permalink / raw)
To: linux-arm-kernel
Haojian Zhuang <haojian.zhuang@linaro.org> writes:
> On 30 August 2013 02:13, Kevin Hilman <khilman@linaro.org> wrote:
>> Haojian Zhuang <haojian.zhuang@linaro.org> writes:
>>
>>> Enable Hisilicon Hi4511 development platform with device tree support.
>>>
>>> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
>>
>> This still doesn't look quite right...
>>
>>> ---
>>> arch/arm/boot/dts/Makefile | 1 +
>>> arch/arm/boot/dts/hi3620-clk.dtsi | 1058 +++++++++++++++++++++++++++++++++++++
>>> arch/arm/boot/dts/hi3620.dtsi | 513 ++++++++++++++++++
>>> arch/arm/boot/dts/hi4511.dts | 648 +++++++++++++++++++++++
>>> 4 files changed, 2220 insertions(+)
>>> create mode 100644 arch/arm/boot/dts/hi3620-clk.dtsi
>>> create mode 100644 arch/arm/boot/dts/hi3620.dtsi
>>> create mode 100644 arch/arm/boot/dts/hi4511.dts
>>>
>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>>> index 641b3c9..6e7c1ca 100644
>>> --- a/arch/arm/boot/dts/Makefile
>>> +++ b/arch/arm/boot/dts/Makefile
>>> @@ -61,6 +61,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
>>> exynos5250-snow.dtb \
>>> exynos5420-smdk5420.dtb \
>>> exynos5440-ssdk5440.dtb
>>> +dtb-$(CONFIG_ARCH_HI3xxx) += hi4511.dtb
>>> dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
>>> ecx-2000.dtb
>>> dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
>>> diff --git a/arch/arm/boot/dts/hi3620-clk.dtsi b/arch/arm/boot/dts/hi3620-clk.dtsi
>>> new file mode 100644
>>> index 0000000..78307c6
>>> --- /dev/null
>>> +++ b/arch/arm/boot/dts/hi3620-clk.dtsi
>>> @@ -0,0 +1,1058 @@
>>> +/*
>>> + * Hisilicon Ltd. Hi3620 SoC
>>> + *
>>> + * Copyright (C) 2012-2013 Hisilicon Ltd.
>>> + * Copyright (C) 2012-2013 Linaro Ltd.
>>> + *
>>> + * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify
>>> + * it under the terms of the GNU General Public License version 2 as
>>> + * publishhed by the Free Software Foundation.
>>> + */
>>> +
>>> +/ {
>>> + clocks {
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + ranges;
>>> +
>>> + osc32k: osc32k {
>>> + compatible = "fixed-clock";
>>> + #clock-cells = <0>;
>>> + clock-frequency = <32768>;
>>> + clock-output-names = "osc32khz";
>>> + };
>>
>> So you've now moved these all under the clocks node, but this still
>> isn't addressing Stephen's comments about using the
>> node-name at unit-address and the reg property in each node.
>>
>> [...]
>>
>>> + sysctrl: system-controller at fc802000 {
>>> + compatible = "hisilicon,sysctrl";
>>> + reg = <0xfc802000 0x1000>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>
>> Why is sysctrl and all of its children now under the clocks node?
>>
>>
>> Kevin
>
> SMP registers and clock registers are sharing the system controller.
That suggest the clock node should be a child of the sysctrl node, not
the other way around.
Kevin
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v9 3/7] ARM: dts: enable hi4511 with device tree
2013-08-30 14:44 ` Kevin Hilman
@ 2013-09-02 8:33 ` Linus Walleij
0 siblings, 0 replies; 13+ messages in thread
From: Linus Walleij @ 2013-09-02 8:33 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Aug 30, 2013 at 4:44 PM, Kevin Hilman <khilman@linaro.org> wrote:
>>> Why is sysctrl and all of its children now under the clocks node?
>>>
>>> Kevin
>>
>> SMP registers and clock registers are sharing the system controller.
>
> That suggest the clock node should be a child of the sysctrl node, not
> the other way around.
That is the way we do it for the Nomadik in
arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
so a precedent exist. (SRC is system reset and control).
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2013-09-02 8:33 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-08-28 13:10 [PATCH v9 0/7] enable hi3xxx SoC Haojian Zhuang
2013-08-28 13:10 ` [PATCH v9 1/7] clk: hi3xxx: add clock support Haojian Zhuang
2013-08-28 13:10 ` [PATCH v9 2/7] ARM: hi3xxx: add board support with device tree Haojian Zhuang
2013-08-28 13:10 ` [PATCH v9 3/7] ARM: dts: enable hi4511 " Haojian Zhuang
2013-08-29 18:13 ` Kevin Hilman
2013-08-30 1:19 ` Haojian Zhuang
2013-08-30 14:44 ` Kevin Hilman
2013-09-02 8:33 ` Linus Walleij
2013-08-28 13:10 ` [PATCH v9 4/7] ARM: config: enable hi3xxx in multi_v7_defconfig Haojian Zhuang
2013-08-28 13:10 ` [PATCH v9 5/7] ARM: config: add defconfig for Hi3xxx Haojian Zhuang
2013-08-28 13:10 ` [PATCH v9 6/7] ARM: hi3xxx: add smp support Haojian Zhuang
2013-08-29 18:24 ` Kevin Hilman
2013-08-28 13:10 ` [PATCH v9 7/7] ARM: hi3xxx: add hotplug support Haojian Zhuang
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.