All of lore.kernel.org
 help / color / mirror / Atom feed
From: Liu Ying <victor.liu@nxp.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
	dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Cc: andrzej.hajda@intel.com, neil.armstrong@linaro.org,
	robert.foss@linaro.org, Laurent.pinchart@ideasonboard.com,
	jonas@kwiboo.se, jernej.skrabec@gmail.com, airlied@gmail.com,
	daniel@ffwll.ch, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, shawnguo@kernel.org,
	s.hauer@pengutronix.de, kernel@pengutronix.de,
	festevam@gmail.com, linux-imx@nxp.com
Subject: Re: [PATCH 1/2] dt-bindings: display: bridge: Add NXP i.MX93 parallel display format configuration
Date: Mon, 30 Jan 2023 16:39:05 +0800	[thread overview]
Message-ID: <87d6f54c4695330064eda295e258a0a5c3bc48f8.camel@nxp.com> (raw)
In-Reply-To: <3c07b9bd-1981-2945-9efe-80afb0195de8@linaro.org>

On Sun, 2023-01-29 at 12:46 +0100, Krzysztof Kozlowski wrote:
> On 28/01/2023 04:47, Liu Ying wrote:
> > NXP i.MX93 mediamix blk-ctrl contains one DISPLAY_MUX register
> > which
> > configures parallel display format by using the
> > "PARALLEL_DISP_FORMAT"
> > field. Add device tree bindings for the display format
> > configuration.
> > 
> > Signed-off-by: Liu Ying <victor.liu@nxp.com>
> > ---
> >  .../display/bridge/nxp,imx93-pdfc.yaml        | 78
> > +++++++++++++++++++
> >  1 file changed, 78 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/display/bridge/nxp,imx93-
> > pdfc.yaml
> > 
> > diff --git
> > a/Documentation/devicetree/bindings/display/bridge/nxp,imx93-
> > pdfc.yaml
> > b/Documentation/devicetree/bindings/display/bridge/nxp,imx93-
> > pdfc.yaml
> > new file mode 100644
> > index 000000000000..a84bfb46b01d
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bridge/nxp,imx93-
> > pdfc.yaml
> > @@ -0,0 +1,78 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: 
> > https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fdisplay%2Fbridge%2Fnxp%2Cimx93-pdfc.yaml%23&data=05%7C01%7Cvictor.liu%40nxp.com%7C7fb1b69849974435787008db01ee832c%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C638105896131701918%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=kkX5B45NTsmDKKzxjOiE6MaE4zkMVbMe4ILammVSwMc%3D&reserved=0
> > +$schema: 
> > https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fmeta-schemas%2Fcore.yaml%23&data=05%7C01%7Cvictor.liu%40nxp.com%7C7fb1b69849974435787008db01ee832c%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C638105896131701918%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=vIVpdEjIo6H3V8T7iTbDwz4Bmn0d%2BQB4BCJNJ0OzKJw%3D&reserved=0
> > +
> > +title: NXP i.MX93 Parallel Display Format Configuration
> > +
> > +maintainers:
> > +  - Liu Ying <victor.liu@nxp.com>
> > +
> > +description: |
> > +  The i.MX93 mediamix blk-ctrl contains one DISPLAY_MUX register
> > which
> > +  configures parallel display format by using the
> > "PARALLEL_DISP_FORMAT"
> > +  field.
> > +
> > +properties:
> > +  compatible:
> > +    const: nxp,imx93-pdfc
> 
> 
> Based on description, I have doubts this is a separate bridge device.
> Why this is not part of display driver/bindings?

The relevant display controller in i.MX93 SoC is LCDIF. From hardware
design PoV, the parallel display format configuration logic is not a
part of LCDIF. Instead, it's a part of i.MX93 mediamix blk-ctrl. The
blk-ctrl includes controls for miscellaneous devices with small logics,
like this parallel display format configuration, LVDS Display
Bridge(LDB, see fsl,ldb.yaml) and so on. The below pipeline describes
data flow of a parallel display LCD panel:

DRAM -> LCDIF -> parallel display format configuration -> LCD panel

So, the parallel display format configuration appears to be a separate
bridge.

> 
> We do not create usually devices for single registers, because they
> are
> not a devices. Devices are a bit more complex - have some pin
> inputs/outputs, not a register only. Of course there are exception,
> but
> this one does not look like one.

IMHO, this one is a standalone device although it is controlled by one
single register. It's input pins connect to LCDIF and output pins
connect to i.MX93 SoC's pins/pads.

> 
> > +
> > +  reg:
> > +    maxItems: 1
> 
> Your driver tells different story:
> 
> syscon_node_to_regmap(dev->of_node->parent);
> 
> (which also points to fact this is not a separate device)

This function call gets the parent device's(mediamix blk-ctrl's)
regmap, like fsl-ldb.c does. Same to LDB, the parallel display format
configuration device is a child device of the mediamix blk-ctrl device.

Regards,
Liu Ying

> 
> Best regards,
> Krzysztof
> 


WARNING: multiple messages have this Message-ID (diff)
From: Liu Ying <victor.liu@nxp.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
	 dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	 linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Cc: neil.armstrong@linaro.org, krzysztof.kozlowski+dt@linaro.org,
	jonas@kwiboo.se, shawnguo@kernel.org, s.hauer@pengutronix.de,
	linux-imx@nxp.com, jernej.skrabec@gmail.com, robh+dt@kernel.org,
	robert.foss@linaro.org, andrzej.hajda@intel.com,
	kernel@pengutronix.de, Laurent.pinchart@ideasonboard.com
Subject: Re: [PATCH 1/2] dt-bindings: display: bridge: Add NXP i.MX93 parallel display format configuration
Date: Mon, 30 Jan 2023 16:39:05 +0800	[thread overview]
Message-ID: <87d6f54c4695330064eda295e258a0a5c3bc48f8.camel@nxp.com> (raw)
In-Reply-To: <3c07b9bd-1981-2945-9efe-80afb0195de8@linaro.org>

On Sun, 2023-01-29 at 12:46 +0100, Krzysztof Kozlowski wrote:
> On 28/01/2023 04:47, Liu Ying wrote:
> > NXP i.MX93 mediamix blk-ctrl contains one DISPLAY_MUX register
> > which
> > configures parallel display format by using the
> > "PARALLEL_DISP_FORMAT"
> > field. Add device tree bindings for the display format
> > configuration.
> > 
> > Signed-off-by: Liu Ying <victor.liu@nxp.com>
> > ---
> >  .../display/bridge/nxp,imx93-pdfc.yaml        | 78
> > +++++++++++++++++++
> >  1 file changed, 78 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/display/bridge/nxp,imx93-
> > pdfc.yaml
> > 
> > diff --git
> > a/Documentation/devicetree/bindings/display/bridge/nxp,imx93-
> > pdfc.yaml
> > b/Documentation/devicetree/bindings/display/bridge/nxp,imx93-
> > pdfc.yaml
> > new file mode 100644
> > index 000000000000..a84bfb46b01d
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bridge/nxp,imx93-
> > pdfc.yaml
> > @@ -0,0 +1,78 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: 
> > https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fdisplay%2Fbridge%2Fnxp%2Cimx93-pdfc.yaml%23&data=05%7C01%7Cvictor.liu%40nxp.com%7C7fb1b69849974435787008db01ee832c%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C638105896131701918%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=kkX5B45NTsmDKKzxjOiE6MaE4zkMVbMe4ILammVSwMc%3D&reserved=0
> > +$schema: 
> > https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fmeta-schemas%2Fcore.yaml%23&data=05%7C01%7Cvictor.liu%40nxp.com%7C7fb1b69849974435787008db01ee832c%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C638105896131701918%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=vIVpdEjIo6H3V8T7iTbDwz4Bmn0d%2BQB4BCJNJ0OzKJw%3D&reserved=0
> > +
> > +title: NXP i.MX93 Parallel Display Format Configuration
> > +
> > +maintainers:
> > +  - Liu Ying <victor.liu@nxp.com>
> > +
> > +description: |
> > +  The i.MX93 mediamix blk-ctrl contains one DISPLAY_MUX register
> > which
> > +  configures parallel display format by using the
> > "PARALLEL_DISP_FORMAT"
> > +  field.
> > +
> > +properties:
> > +  compatible:
> > +    const: nxp,imx93-pdfc
> 
> 
> Based on description, I have doubts this is a separate bridge device.
> Why this is not part of display driver/bindings?

The relevant display controller in i.MX93 SoC is LCDIF. From hardware
design PoV, the parallel display format configuration logic is not a
part of LCDIF. Instead, it's a part of i.MX93 mediamix blk-ctrl. The
blk-ctrl includes controls for miscellaneous devices with small logics,
like this parallel display format configuration, LVDS Display
Bridge(LDB, see fsl,ldb.yaml) and so on. The below pipeline describes
data flow of a parallel display LCD panel:

DRAM -> LCDIF -> parallel display format configuration -> LCD panel

So, the parallel display format configuration appears to be a separate
bridge.

> 
> We do not create usually devices for single registers, because they
> are
> not a devices. Devices are a bit more complex - have some pin
> inputs/outputs, not a register only. Of course there are exception,
> but
> this one does not look like one.

IMHO, this one is a standalone device although it is controlled by one
single register. It's input pins connect to LCDIF and output pins
connect to i.MX93 SoC's pins/pads.

> 
> > +
> > +  reg:
> > +    maxItems: 1
> 
> Your driver tells different story:
> 
> syscon_node_to_regmap(dev->of_node->parent);
> 
> (which also points to fact this is not a separate device)

This function call gets the parent device's(mediamix blk-ctrl's)
regmap, like fsl-ldb.c does. Same to LDB, the parallel display format
configuration device is a child device of the mediamix blk-ctrl device.

Regards,
Liu Ying

> 
> Best regards,
> Krzysztof
> 


WARNING: multiple messages have this Message-ID (diff)
From: Liu Ying <victor.liu@nxp.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
	 dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	 linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Cc: andrzej.hajda@intel.com, neil.armstrong@linaro.org,
	robert.foss@linaro.org,  Laurent.pinchart@ideasonboard.com,
	jonas@kwiboo.se, jernej.skrabec@gmail.com,  airlied@gmail.com,
	daniel@ffwll.ch, robh+dt@kernel.org,
	 krzysztof.kozlowski+dt@linaro.org, shawnguo@kernel.org,
	s.hauer@pengutronix.de,  kernel@pengutronix.de,
	festevam@gmail.com, linux-imx@nxp.com
Subject: Re: [PATCH 1/2] dt-bindings: display: bridge: Add NXP i.MX93 parallel display format configuration
Date: Mon, 30 Jan 2023 16:39:05 +0800	[thread overview]
Message-ID: <87d6f54c4695330064eda295e258a0a5c3bc48f8.camel@nxp.com> (raw)
In-Reply-To: <3c07b9bd-1981-2945-9efe-80afb0195de8@linaro.org>

On Sun, 2023-01-29 at 12:46 +0100, Krzysztof Kozlowski wrote:
> On 28/01/2023 04:47, Liu Ying wrote:
> > NXP i.MX93 mediamix blk-ctrl contains one DISPLAY_MUX register
> > which
> > configures parallel display format by using the
> > "PARALLEL_DISP_FORMAT"
> > field. Add device tree bindings for the display format
> > configuration.
> > 
> > Signed-off-by: Liu Ying <victor.liu@nxp.com>
> > ---
> >  .../display/bridge/nxp,imx93-pdfc.yaml        | 78
> > +++++++++++++++++++
> >  1 file changed, 78 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/display/bridge/nxp,imx93-
> > pdfc.yaml
> > 
> > diff --git
> > a/Documentation/devicetree/bindings/display/bridge/nxp,imx93-
> > pdfc.yaml
> > b/Documentation/devicetree/bindings/display/bridge/nxp,imx93-
> > pdfc.yaml
> > new file mode 100644
> > index 000000000000..a84bfb46b01d
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bridge/nxp,imx93-
> > pdfc.yaml
> > @@ -0,0 +1,78 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: 
> > https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fdisplay%2Fbridge%2Fnxp%2Cimx93-pdfc.yaml%23&data=05%7C01%7Cvictor.liu%40nxp.com%7C7fb1b69849974435787008db01ee832c%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C638105896131701918%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=kkX5B45NTsmDKKzxjOiE6MaE4zkMVbMe4ILammVSwMc%3D&reserved=0
> > +$schema: 
> > https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fmeta-schemas%2Fcore.yaml%23&data=05%7C01%7Cvictor.liu%40nxp.com%7C7fb1b69849974435787008db01ee832c%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C638105896131701918%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=vIVpdEjIo6H3V8T7iTbDwz4Bmn0d%2BQB4BCJNJ0OzKJw%3D&reserved=0
> > +
> > +title: NXP i.MX93 Parallel Display Format Configuration
> > +
> > +maintainers:
> > +  - Liu Ying <victor.liu@nxp.com>
> > +
> > +description: |
> > +  The i.MX93 mediamix blk-ctrl contains one DISPLAY_MUX register
> > which
> > +  configures parallel display format by using the
> > "PARALLEL_DISP_FORMAT"
> > +  field.
> > +
> > +properties:
> > +  compatible:
> > +    const: nxp,imx93-pdfc
> 
> 
> Based on description, I have doubts this is a separate bridge device.
> Why this is not part of display driver/bindings?

The relevant display controller in i.MX93 SoC is LCDIF. From hardware
design PoV, the parallel display format configuration logic is not a
part of LCDIF. Instead, it's a part of i.MX93 mediamix blk-ctrl. The
blk-ctrl includes controls for miscellaneous devices with small logics,
like this parallel display format configuration, LVDS Display
Bridge(LDB, see fsl,ldb.yaml) and so on. The below pipeline describes
data flow of a parallel display LCD panel:

DRAM -> LCDIF -> parallel display format configuration -> LCD panel

So, the parallel display format configuration appears to be a separate
bridge.

> 
> We do not create usually devices for single registers, because they
> are
> not a devices. Devices are a bit more complex - have some pin
> inputs/outputs, not a register only. Of course there are exception,
> but
> this one does not look like one.

IMHO, this one is a standalone device although it is controlled by one
single register. It's input pins connect to LCDIF and output pins
connect to i.MX93 SoC's pins/pads.

> 
> > +
> > +  reg:
> > +    maxItems: 1
> 
> Your driver tells different story:
> 
> syscon_node_to_regmap(dev->of_node->parent);
> 
> (which also points to fact this is not a separate device)

This function call gets the parent device's(mediamix blk-ctrl's)
regmap, like fsl-ldb.c does. Same to LDB, the parallel display format
configuration device is a child device of the mediamix blk-ctrl device.

Regards,
Liu Ying

> 
> Best regards,
> Krzysztof
> 


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2023-01-30  8:42 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-28  3:47 [PATCH 0/2] drm/bridge: imx: Add i.MX93 parallel display format configuration support Liu Ying
2023-01-28  3:47 ` Liu Ying
2023-01-28  3:47 ` Liu Ying
2023-01-28  3:47 ` [PATCH 1/2] dt-bindings: display: bridge: Add NXP i.MX93 parallel display format configuration Liu Ying
2023-01-28  3:47   ` Liu Ying
2023-01-28  3:47   ` Liu Ying
2023-01-29 11:46   ` Krzysztof Kozlowski
2023-01-29 11:46     ` Krzysztof Kozlowski
2023-01-29 11:46     ` Krzysztof Kozlowski
2023-01-30  8:39     ` Liu Ying [this message]
2023-01-30  8:39       ` Liu Ying
2023-01-30  8:39       ` Liu Ying
2023-01-30 21:39       ` Rob Herring
2023-01-30 21:39         ` Rob Herring
2023-01-30 21:39         ` Rob Herring
2023-01-31  0:57         ` Liu Ying
2023-01-31  0:57           ` Liu Ying
2023-01-31  0:57           ` Liu Ying
2023-01-28  3:47 ` [PATCH 2/2] drm/bridge: imx: Add i.MX93 parallel display format configuration support Liu Ying
2023-01-28  3:47   ` Liu Ying
2023-01-28  3:47   ` Liu Ying

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87d6f54c4695330064eda295e258a0a5c3bc48f8.camel@nxp.com \
    --to=victor.liu@nxp.com \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=airlied@gmail.com \
    --cc=andrzej.hajda@intel.com \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=festevam@gmail.com \
    --cc=jernej.skrabec@gmail.com \
    --cc=jonas@kwiboo.se \
    --cc=kernel@pengutronix.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=krzysztof.kozlowski@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=robert.foss@linaro.org \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.