From: Kalle Valo <kvalo@qca.qualcomm.com>
To: Sujith Manoharan <sujith@msujith.org>
Cc: <ath10k@lists.infradead.org>, <linux-wireless@vger.kernel.org>
Subject: Re: [PATCH] ath10k: Enable RX batching
Date: Fri, 2 Jan 2015 09:45:54 +0200 [thread overview]
Message-ID: <87fvbt62x9.fsf@kamboji.qca.qualcomm.com> (raw)
In-Reply-To: <1419834084-11859-1-git-send-email-sujith@msujith.org> (Sujith Manoharan's message of "Mon, 29 Dec 2014 11:51:24 +0530")
Sujith Manoharan <sujith@msujith.org> writes:
> From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
>
> This feature allows the FW to batch RX indications,
> reducing the rate of host interrupt generation, which
> in turn reduces CPU load. Currently, this is enabled
> only for the 10.2 firmware.
>
> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Any throughput improvements?
Also I simplified the patch a bit in ath-next-test:
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -3710,7 +3710,7 @@ static struct sk_buff *ath10k_wmi_10_2_op_gen_init(struct ath10k *ar)
struct wmi_init_cmd_10_2 *cmd;
struct sk_buff *buf;
struct wmi_resource_config_10x config = {};
- u32 len, val, features = 0;
+ u32 len, val, features;
config.num_vdevs = __cpu_to_le32(TARGET_10X_NUM_VDEVS);
config.num_peers = __cpu_to_le32(TARGET_10X_NUM_PEERS);
@@ -3764,7 +3764,7 @@ static struct sk_buff *ath10k_wmi_10_2_op_gen_init(struct ath10k *ar)
cmd = (struct wmi_init_cmd_10_2 *)buf->data;
- features |= WMI_10_2_RX_BATCH_MODE;
+ features = WMI_10_2_RX_BATCH_MODE;
cmd->resource_config.feature_mask = __cpu_to_le32(features);
memcpy(&cmd->resource_config.common, &config, sizeof(config));
--
Kalle Valo
WARNING: multiple messages have this Message-ID (diff)
From: Kalle Valo <kvalo@qca.qualcomm.com>
To: Sujith Manoharan <sujith@msujith.org>
Cc: linux-wireless@vger.kernel.org, ath10k@lists.infradead.org
Subject: Re: [PATCH] ath10k: Enable RX batching
Date: Fri, 2 Jan 2015 09:45:54 +0200 [thread overview]
Message-ID: <87fvbt62x9.fsf@kamboji.qca.qualcomm.com> (raw)
In-Reply-To: <1419834084-11859-1-git-send-email-sujith@msujith.org> (Sujith Manoharan's message of "Mon, 29 Dec 2014 11:51:24 +0530")
Sujith Manoharan <sujith@msujith.org> writes:
> From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
>
> This feature allows the FW to batch RX indications,
> reducing the rate of host interrupt generation, which
> in turn reduces CPU load. Currently, this is enabled
> only for the 10.2 firmware.
>
> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Any throughput improvements?
Also I simplified the patch a bit in ath-next-test:
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -3710,7 +3710,7 @@ static struct sk_buff *ath10k_wmi_10_2_op_gen_init(struct ath10k *ar)
struct wmi_init_cmd_10_2 *cmd;
struct sk_buff *buf;
struct wmi_resource_config_10x config = {};
- u32 len, val, features = 0;
+ u32 len, val, features;
config.num_vdevs = __cpu_to_le32(TARGET_10X_NUM_VDEVS);
config.num_peers = __cpu_to_le32(TARGET_10X_NUM_PEERS);
@@ -3764,7 +3764,7 @@ static struct sk_buff *ath10k_wmi_10_2_op_gen_init(struct ath10k *ar)
cmd = (struct wmi_init_cmd_10_2 *)buf->data;
- features |= WMI_10_2_RX_BATCH_MODE;
+ features = WMI_10_2_RX_BATCH_MODE;
cmd->resource_config.feature_mask = __cpu_to_le32(features);
memcpy(&cmd->resource_config.common, &config, sizeof(config));
--
Kalle Valo
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2015-01-02 7:46 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-29 6:21 [PATCH] ath10k: Enable RX batching Sujith Manoharan
2014-12-29 6:21 ` Sujith Manoharan
2015-01-02 7:45 ` Kalle Valo [this message]
2015-01-02 7:45 ` Kalle Valo
2015-01-02 8:41 ` Sujith Manoharan
2015-01-02 8:41 ` Sujith Manoharan
2015-01-02 8:49 ` Kalle Valo
2015-01-02 8:49 ` Kalle Valo
2015-01-02 10:43 ` Sujith Manoharan
2015-01-02 10:43 ` Sujith Manoharan
2015-01-02 13:33 ` Kalle Valo
2015-01-02 13:33 ` Kalle Valo
2015-01-12 11:56 ` Kalle Valo
2015-01-12 11:56 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87fvbt62x9.fsf@kamboji.qca.qualcomm.com \
--to=kvalo@qca.qualcomm.com \
--cc=ath10k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=sujith@msujith.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.