* [Qemu-devel] [PULL 00/10] vnc: add support for multiple vnc displays
@ 2014-12-19 9:04 Gerd Hoffmann
2014-12-19 9:04 ` [Qemu-devel] [PULL 01/10] vnc: remove vnc_display global Gerd Hoffmann
` (10 more replies)
0 siblings, 11 replies; 22+ messages in thread
From: Gerd Hoffmann @ 2014-12-19 9:04 UTC (permalink / raw)
To: qemu-devel; +Cc: Gerd Hoffmann
Hi,
Ok, here we go with the multiple vnc display patch series.
Compared to the v3 series two patch hunks have been moved
from patch #9 to patch #2. The final result after applying
all patches hasn't changed, so I think it's ok to go straight
for a pull req instead of sending a v4.
please pull,
Gerd
The following changes since commit dfa9c2a0f4d0a0c8b2c1449ecdbb1297427e1560:
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging (2014-12-15 16:43:42 +0000)
are available in the git repository at:
git://git.kraxel.org/qemu tags/pull-vnc-20141219-1
for you to fetch changes up to 59235e2be96bbc86e10d8429bda21443b7b9ea57:
monitor: add vnc websockets (2014-12-17 15:50:29 +0100)
----------------------------------------------------------------
vnc: add support for multiple vnc server instances.
----------------------------------------------------------------
Gerd Hoffmann (10):
vnc: remove vnc_display global
vnc: remove unused DisplayState parameter, add id instead.
vnc: add display id to acl names
vnc: switch to QemuOpts, allow multiple servers
vnc: allow binding servers to qemu consoles
vnc: update docs/multiseat.txt
vnc: track & limit connections
vnc: factor out qmp_query_client_list
monitor: add query-vnc2 command
monitor: add vnc websockets
docs/multiseat.txt | 18 +-
include/ui/console.h | 18 +-
qapi-schema.json | 73 +++++-
qmp-commands.hx | 5 +
qmp.c | 15 +-
ui/vnc.c | 634 ++++++++++++++++++++++++++++++++++++++-------------
ui/vnc.h | 5 +
vl.c | 41 ++--
8 files changed, 611 insertions(+), 198 deletions(-)
^ permalink raw reply [flat|nested] 22+ messages in thread
* [Qemu-devel] [PULL 01/10] vnc: remove vnc_display global
2014-12-19 9:04 [Qemu-devel] [PULL 00/10] vnc: add support for multiple vnc displays Gerd Hoffmann
@ 2014-12-19 9:04 ` Gerd Hoffmann
2014-12-19 9:04 ` [Qemu-devel] [PULL 02/10] vnc: remove unused DisplayState parameter, add id instead Gerd Hoffmann
` (9 subsequent siblings)
10 siblings, 0 replies; 22+ messages in thread
From: Gerd Hoffmann @ 2014-12-19 9:04 UTC (permalink / raw)
To: qemu-devel; +Cc: Gerd Hoffmann, Anthony Liguori
Replace with a vnc_displays list, so we can have multiple vnc server
instances. Add vnc_server_find function to lookup a display by id.
With no id supplied return the first vnc server, for backward
compatibility reasons.
It is not possible (yet) to actually create multiple vnc server
instances.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
---
ui/vnc.c | 63 +++++++++++++++++++++++++++++++++++++++++----------------------
ui/vnc.h | 2 ++
2 files changed, 43 insertions(+), 22 deletions(-)
diff --git a/ui/vnc.c b/ui/vnc.c
index 5707015..a6549c8 100644
--- a/ui/vnc.c
+++ b/ui/vnc.c
@@ -46,7 +46,8 @@ static const struct timeval VNC_REFRESH_LOSSY = { 2, 0 };
#include "vnc_keysym.h"
#include "d3des.h"
-static VncDisplay *vnc_display; /* needed for info vnc */
+static QTAILQ_HEAD(, VncDisplay) vnc_displays =
+ QTAILQ_HEAD_INITIALIZER(vnc_displays);
static int vnc_cursor_define(VncState *vs);
static void vnc_release_modifiers(VncState *vs);
@@ -226,10 +227,10 @@ static const char *vnc_auth_name(VncDisplay *vd) {
return "unknown";
}
-static VncServerInfo *vnc_server_info_get(void)
+static VncServerInfo *vnc_server_info_get(VncDisplay *vd)
{
VncServerInfo *info;
- VncBasicInfo *bi = vnc_basic_info_get_from_server_addr(vnc_display->lsock);
+ VncBasicInfo *bi = vnc_basic_info_get_from_server_addr(vd->lsock);
if (!bi) {
return NULL;
}
@@ -237,7 +238,7 @@ static VncServerInfo *vnc_server_info_get(void)
info = g_malloc(sizeof(*info));
info->base = bi;
info->has_auth = true;
- info->auth = g_strdup(vnc_auth_name(vnc_display));
+ info->auth = g_strdup(vnc_auth_name(vd));
return info;
}
@@ -282,7 +283,7 @@ static void vnc_qmp_event(VncState *vs, QAPIEvent event)
}
g_assert(vs->info->base);
- si = vnc_server_info_get();
+ si = vnc_server_info_get(vs->vd);
if (!si) {
return;
}
@@ -345,11 +346,27 @@ static VncClientInfo *qmp_query_vnc_client(const VncState *client)
return info;
}
+static VncDisplay *vnc_display_find(const char *id)
+{
+ VncDisplay *vd;
+
+ if (id == NULL) {
+ return QTAILQ_FIRST(&vnc_displays);
+ }
+ QTAILQ_FOREACH(vd, &vnc_displays, next) {
+ if (strcmp(id, vd->id) == 0) {
+ return vd;
+ }
+ }
+ return NULL;
+}
+
VncInfo *qmp_query_vnc(Error **errp)
{
VncInfo *info = g_malloc0(sizeof(*info));
+ VncDisplay *vd = vnc_display_find(NULL);
- if (vnc_display == NULL || vnc_display->display == NULL) {
+ if (vd == NULL || vd->display == NULL) {
info->enabled = false;
} else {
VncClientInfoList *cur_item = NULL;
@@ -364,7 +381,7 @@ VncInfo *qmp_query_vnc(Error **errp)
/* for compatibility with the original command */
info->has_clients = true;
- QTAILQ_FOREACH(client, &vnc_display->clients, next) {
+ QTAILQ_FOREACH(client, &vd->clients, next) {
VncClientInfoList *cinfo = g_malloc0(sizeof(*info));
cinfo->value = qmp_query_vnc_client(client);
@@ -377,11 +394,11 @@ VncInfo *qmp_query_vnc(Error **errp)
}
}
- if (vnc_display->lsock == -1) {
+ if (vd->lsock == -1) {
return info;
}
- if (getsockname(vnc_display->lsock, (struct sockaddr *)&sa,
+ if (getsockname(vd->lsock, (struct sockaddr *)&sa,
&salen) == -1) {
error_set(errp, QERR_UNDEFINED_ERROR);
goto out_error;
@@ -405,7 +422,7 @@ VncInfo *qmp_query_vnc(Error **errp)
info->family = inet_netfamily(sa.ss_family);
info->has_auth = true;
- info->auth = g_strdup(vnc_auth_name(vnc_display));
+ info->auth = g_strdup(vnc_auth_name(vd));
}
return info;
@@ -853,7 +870,7 @@ static int vnc_cursor_define(VncState *vs)
static void vnc_dpy_cursor_define(DisplayChangeListener *dcl,
QEMUCursor *c)
{
- VncDisplay *vd = vnc_display;
+ VncDisplay *vd = container_of(dcl, VncDisplay, dcl);
VncState *vs;
cursor_put(vd->cursor);
@@ -2818,6 +2835,7 @@ static void vnc_connect(VncDisplay *vd, int csock,
int i;
vs->csock = csock;
+ vs->vd = vd;
if (skipauth) {
vs->auth = VNC_AUTH_NONE;
@@ -2862,8 +2880,6 @@ static void vnc_connect(VncDisplay *vd, int csock,
vnc_qmp_event(vs, QAPI_EVENT_VNC_CONNECTED);
vnc_set_share_mode(vs, VNC_SHARE_MODE_CONNECTING);
- vs->vd = vd;
-
#ifdef CONFIG_VNC_WS
if (!vs->websocket)
#endif
@@ -2955,7 +2971,7 @@ void vnc_display_init(DisplayState *ds)
{
VncDisplay *vs = g_malloc0(sizeof(*vs));
- vnc_display = vs;
+ QTAILQ_INSERT_TAIL(&vnc_displays, vs, next);
vs->lsock = -1;
#ifdef CONFIG_VNC_WS
@@ -2985,7 +3001,7 @@ void vnc_display_init(DisplayState *ds)
static void vnc_display_close(DisplayState *ds)
{
- VncDisplay *vs = vnc_display;
+ VncDisplay *vs = vnc_display_find(NULL);
if (!vs)
return;
@@ -3014,7 +3030,7 @@ static void vnc_display_close(DisplayState *ds)
int vnc_display_password(DisplayState *ds, const char *password)
{
- VncDisplay *vs = vnc_display;
+ VncDisplay *vs = vnc_display_find(NULL);
if (!vs) {
return -EINVAL;
@@ -3033,7 +3049,7 @@ int vnc_display_password(DisplayState *ds, const char *password)
int vnc_display_pw_expire(DisplayState *ds, time_t expires)
{
- VncDisplay *vs = vnc_display;
+ VncDisplay *vs = vnc_display_find(NULL);
if (!vs) {
return -EINVAL;
@@ -3045,14 +3061,14 @@ int vnc_display_pw_expire(DisplayState *ds, time_t expires)
char *vnc_display_local_addr(DisplayState *ds)
{
- VncDisplay *vs = vnc_display;
-
+ VncDisplay *vs = vnc_display_find(NULL);
+
return vnc_socket_local_addr("%s:%s", vs->lsock);
}
void vnc_display_open(DisplayState *ds, const char *display, Error **errp)
{
- VncDisplay *vs = vnc_display;
+ VncDisplay *vs = vnc_display_find(NULL);
const char *options;
int password = 0;
int reverse = 0;
@@ -3068,7 +3084,7 @@ void vnc_display_open(DisplayState *ds, const char *display, Error **errp)
#endif
int lock_key_sync = 1;
- if (!vnc_display) {
+ if (!vs) {
error_setg(errp, "VNC display not active");
return;
}
@@ -3367,7 +3383,10 @@ fail:
void vnc_display_add_client(DisplayState *ds, int csock, bool skipauth)
{
- VncDisplay *vs = vnc_display;
+ VncDisplay *vs = vnc_display_find(NULL);
+ if (!vs) {
+ return;
+ }
vnc_connect(vs, csock, skipauth, false);
}
diff --git a/ui/vnc.h b/ui/vnc.h
index 334de9d..6fe8278 100644
--- a/ui/vnc.h
+++ b/ui/vnc.h
@@ -171,6 +171,8 @@ struct VncDisplay
struct VncSurface guest; /* guest visible surface (aka ds->surface) */
pixman_image_t *server; /* vnc server surface */
+ const char *id;
+ QTAILQ_ENTRY(VncDisplay) next;
char *display;
char *password;
time_t expires;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [Qemu-devel] [PULL 02/10] vnc: remove unused DisplayState parameter, add id instead.
2014-12-19 9:04 [Qemu-devel] [PULL 00/10] vnc: add support for multiple vnc displays Gerd Hoffmann
2014-12-19 9:04 ` [Qemu-devel] [PULL 01/10] vnc: remove vnc_display global Gerd Hoffmann
@ 2014-12-19 9:04 ` Gerd Hoffmann
2014-12-19 9:04 ` [Qemu-devel] [PULL 03/10] vnc: add display id to acl names Gerd Hoffmann
` (8 subsequent siblings)
10 siblings, 0 replies; 22+ messages in thread
From: Gerd Hoffmann @ 2014-12-19 9:04 UTC (permalink / raw)
To: qemu-devel; +Cc: Paolo Bonzini, Gerd Hoffmann, Anthony Liguori
DisplayState isn't used anywhere, drop it. Add the vnc server ID as
parameter instead, so it is possible to specify the server instance.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
---
include/ui/console.h | 16 ++++++++--------
ui/vnc.c | 29 ++++++++++++++---------------
vl.c | 7 ++++---
3 files changed, 26 insertions(+), 26 deletions(-)
diff --git a/include/ui/console.h b/include/ui/console.h
index 22ef8ca..5ff2e27 100644
--- a/include/ui/console.h
+++ b/include/ui/console.h
@@ -327,19 +327,19 @@ void sdl_display_init(DisplayState *ds, int full_screen, int no_frame);
void cocoa_display_init(DisplayState *ds, int full_screen);
/* vnc.c */
-void vnc_display_init(DisplayState *ds);
-void vnc_display_open(DisplayState *ds, const char *display, Error **errp);
-void vnc_display_add_client(DisplayState *ds, int csock, bool skipauth);
-char *vnc_display_local_addr(DisplayState *ds);
+void vnc_display_init(const char *id);
+void vnc_display_open(const char *id, const char *display, Error **errp);
+void vnc_display_add_client(const char *id, int csock, bool skipauth);
+char *vnc_display_local_addr(const char *id);
#ifdef CONFIG_VNC
-int vnc_display_password(DisplayState *ds, const char *password);
-int vnc_display_pw_expire(DisplayState *ds, time_t expires);
+int vnc_display_password(const char *id, const char *password);
+int vnc_display_pw_expire(const char *id, time_t expires);
#else
-static inline int vnc_display_password(DisplayState *ds, const char *password)
+static inline int vnc_display_password(const char *id, const char *password)
{
return -ENODEV;
}
-static inline int vnc_display_pw_expire(DisplayState *ds, time_t expires)
+static inline int vnc_display_pw_expire(const char *id, time_t expires)
{
return -ENODEV;
};
diff --git a/ui/vnc.c b/ui/vnc.c
index a6549c8..fce4861 100644
--- a/ui/vnc.c
+++ b/ui/vnc.c
@@ -2967,10 +2967,11 @@ static const DisplayChangeListenerOps dcl_ops = {
.dpy_cursor_define = vnc_dpy_cursor_define,
};
-void vnc_display_init(DisplayState *ds)
+void vnc_display_init(const char *id)
{
VncDisplay *vs = g_malloc0(sizeof(*vs));
+ vs->id = strdup(id);
QTAILQ_INSERT_TAIL(&vnc_displays, vs, next);
vs->lsock = -1;
@@ -2999,10 +3000,8 @@ void vnc_display_init(DisplayState *ds)
}
-static void vnc_display_close(DisplayState *ds)
+static void vnc_display_close(VncDisplay *vs)
{
- VncDisplay *vs = vnc_display_find(NULL);
-
if (!vs)
return;
g_free(vs->display);
@@ -3028,9 +3027,9 @@ static void vnc_display_close(DisplayState *ds)
#endif
}
-int vnc_display_password(DisplayState *ds, const char *password)
+int vnc_display_password(const char *id, const char *password)
{
- VncDisplay *vs = vnc_display_find(NULL);
+ VncDisplay *vs = vnc_display_find(id);
if (!vs) {
return -EINVAL;
@@ -3047,9 +3046,9 @@ int vnc_display_password(DisplayState *ds, const char *password)
return 0;
}
-int vnc_display_pw_expire(DisplayState *ds, time_t expires)
+int vnc_display_pw_expire(const char *id, time_t expires)
{
- VncDisplay *vs = vnc_display_find(NULL);
+ VncDisplay *vs = vnc_display_find(id);
if (!vs) {
return -EINVAL;
@@ -3059,16 +3058,16 @@ int vnc_display_pw_expire(DisplayState *ds, time_t expires)
return 0;
}
-char *vnc_display_local_addr(DisplayState *ds)
+char *vnc_display_local_addr(const char *id)
{
- VncDisplay *vs = vnc_display_find(NULL);
+ VncDisplay *vs = vnc_display_find(id);
return vnc_socket_local_addr("%s:%s", vs->lsock);
}
-void vnc_display_open(DisplayState *ds, const char *display, Error **errp)
+void vnc_display_open(const char *id, const char *display, Error **errp)
{
- VncDisplay *vs = vnc_display_find(NULL);
+ VncDisplay *vs = vnc_display_find(id);
const char *options;
int password = 0;
int reverse = 0;
@@ -3088,7 +3087,7 @@ void vnc_display_open(DisplayState *ds, const char *display, Error **errp)
error_setg(errp, "VNC display not active");
return;
}
- vnc_display_close(ds);
+ vnc_display_close(vs);
if (strcmp(display, "none") == 0)
return;
@@ -3381,9 +3380,9 @@ fail:
#endif /* CONFIG_VNC_WS */
}
-void vnc_display_add_client(DisplayState *ds, int csock, bool skipauth)
+void vnc_display_add_client(const char *id, int csock, bool skipauth)
{
- VncDisplay *vs = vnc_display_find(NULL);
+ VncDisplay *vs = vnc_display_find(id);
if (!vs) {
return;
diff --git a/vl.c b/vl.c
index 113e98e..afb6212 100644
--- a/vl.c
+++ b/vl.c
@@ -4376,8 +4376,9 @@ int main(int argc, char **argv, char **envp)
/* init remote displays */
if (vnc_display) {
Error *local_err = NULL;
- vnc_display_init(ds);
- vnc_display_open(ds, vnc_display, &local_err);
+ const char *id = "default";
+ vnc_display_init(id);
+ vnc_display_open(id, vnc_display, &local_err);
if (local_err != NULL) {
error_report("Failed to start VNC server on `%s': %s",
vnc_display, error_get_pretty(local_err));
@@ -4386,7 +4387,7 @@ int main(int argc, char **argv, char **envp)
}
if (show_vnc_port) {
- printf("VNC server running on `%s'\n", vnc_display_local_addr(ds));
+ printf("VNC server running on `%s'\n", vnc_display_local_addr(id));
}
}
#endif
--
1.8.3.1
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [Qemu-devel] [PULL 03/10] vnc: add display id to acl names
2014-12-19 9:04 [Qemu-devel] [PULL 00/10] vnc: add support for multiple vnc displays Gerd Hoffmann
2014-12-19 9:04 ` [Qemu-devel] [PULL 01/10] vnc: remove vnc_display global Gerd Hoffmann
2014-12-19 9:04 ` [Qemu-devel] [PULL 02/10] vnc: remove unused DisplayState parameter, add id instead Gerd Hoffmann
@ 2014-12-19 9:04 ` Gerd Hoffmann
2014-12-19 9:04 ` [Qemu-devel] [PULL 04/10] vnc: switch to QemuOpts, allow multiple servers Gerd Hoffmann
` (7 subsequent siblings)
10 siblings, 0 replies; 22+ messages in thread
From: Gerd Hoffmann @ 2014-12-19 9:04 UTC (permalink / raw)
To: qemu-devel; +Cc: Gerd Hoffmann, Anthony Liguori
In case the display id is "default" (which is the one you get if you
don't explicitly assign one) we keep the old name scheme, without
display, for backward compatibility reasons.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
---
ui/vnc.c | 22 ++++++++++++++++++++--
1 file changed, 20 insertions(+), 2 deletions(-)
diff --git a/ui/vnc.c b/ui/vnc.c
index fce4861..1b86365 100644
--- a/ui/vnc.c
+++ b/ui/vnc.c
@@ -3206,18 +3206,36 @@ void vnc_display_open(const char *id, const char *display, Error **errp)
#ifdef CONFIG_VNC_TLS
if (acl && x509 && vs->tls.x509verify) {
- if (!(vs->tls.acl = qemu_acl_init("vnc.x509dname"))) {
+ char *aclname;
+
+ if (strcmp(vs->id, "default") == 0) {
+ aclname = g_strdup("vnc.x509dname");
+ } else {
+ aclname = g_strdup_printf("vnc.%s.x509dname", vs->id);
+ }
+ vs->tls.acl = qemu_acl_init(aclname);
+ if (!vs->tls.acl) {
fprintf(stderr, "Failed to create x509 dname ACL\n");
exit(1);
}
+ g_free(aclname);
}
#endif
#ifdef CONFIG_VNC_SASL
if (acl && sasl) {
- if (!(vs->sasl.acl = qemu_acl_init("vnc.username"))) {
+ char *aclname;
+
+ if (strcmp(vs->id, "default") == 0) {
+ aclname = g_strdup("vnc.username");
+ } else {
+ aclname = g_strdup_printf("vnc.%s.username", vs->id);
+ }
+ vs->sasl.acl = qemu_acl_init(aclname);
+ if (!vs->sasl.acl) {
fprintf(stderr, "Failed to create username ACL\n");
exit(1);
}
+ g_free(aclname);
}
#endif
--
1.8.3.1
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [Qemu-devel] [PULL 04/10] vnc: switch to QemuOpts, allow multiple servers
2014-12-19 9:04 [Qemu-devel] [PULL 00/10] vnc: add support for multiple vnc displays Gerd Hoffmann
` (2 preceding siblings ...)
2014-12-19 9:04 ` [Qemu-devel] [PULL 03/10] vnc: add display id to acl names Gerd Hoffmann
@ 2014-12-19 9:04 ` Gerd Hoffmann
2014-12-19 9:04 ` [Qemu-devel] [PULL 05/10] vnc: allow binding servers to qemu consoles Gerd Hoffmann
` (6 subsequent siblings)
10 siblings, 0 replies; 22+ messages in thread
From: Gerd Hoffmann @ 2014-12-19 9:04 UTC (permalink / raw)
To: qemu-devel; +Cc: Paolo Bonzini, Gerd Hoffmann, Anthony Liguori, Luiz Capitulino
This patch switches vnc over to QemuOpts, and it (more or less
as side effect) allows multiple vnc server instances.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
include/ui/console.h | 4 +-
qmp.c | 15 ++-
ui/vnc.c | 270 ++++++++++++++++++++++++++++++++-------------------
vl.c | 42 +++-----
4 files changed, 199 insertions(+), 132 deletions(-)
diff --git a/include/ui/console.h b/include/ui/console.h
index 5ff2e27..887ed91 100644
--- a/include/ui/console.h
+++ b/include/ui/console.h
@@ -328,12 +328,14 @@ void cocoa_display_init(DisplayState *ds, int full_screen);
/* vnc.c */
void vnc_display_init(const char *id);
-void vnc_display_open(const char *id, const char *display, Error **errp);
+void vnc_display_open(const char *id, Error **errp);
void vnc_display_add_client(const char *id, int csock, bool skipauth);
char *vnc_display_local_addr(const char *id);
#ifdef CONFIG_VNC
int vnc_display_password(const char *id, const char *password);
int vnc_display_pw_expire(const char *id, time_t expires);
+QemuOpts *vnc_parse_func(const char *str);
+int vnc_init_func(QemuOpts *opts, void *opaque);
#else
static inline int vnc_display_password(const char *id, const char *password)
{
diff --git a/qmp.c b/qmp.c
index 0b4f131..963305c 100644
--- a/qmp.c
+++ b/qmp.c
@@ -368,7 +368,20 @@ void qmp_change_vnc_password(const char *password, Error **errp)
static void qmp_change_vnc_listen(const char *target, Error **errp)
{
- vnc_display_open(NULL, target, errp);
+ QemuOptsList *olist = qemu_find_opts("vnc");
+ QemuOpts *opts;
+
+ if (strstr(target, "id=")) {
+ error_setg(errp, "id not supported");
+ return;
+ }
+
+ opts = qemu_opts_find(olist, "default");
+ if (opts) {
+ qemu_opts_del(opts);
+ }
+ opts = vnc_parse_func(target);
+ vnc_display_open("default", errp);
}
static void qmp_change_vnc(const char *target, bool has_arg, const char *arg,
diff --git a/ui/vnc.c b/ui/vnc.c
index 1b86365..ce1dd59 100644
--- a/ui/vnc.c
+++ b/ui/vnc.c
@@ -31,6 +31,7 @@
#include "qemu/sockets.h"
#include "qemu/timer.h"
#include "qemu/acl.h"
+#include "qemu/config-file.h"
#include "qapi/qmp/types.h"
#include "qmp-commands.h"
#include "qemu/osdep.h"
@@ -2969,7 +2970,12 @@ static const DisplayChangeListenerOps dcl_ops = {
void vnc_display_init(const char *id)
{
- VncDisplay *vs = g_malloc0(sizeof(*vs));
+ VncDisplay *vs;
+
+ if (vnc_display_find(id) != NULL) {
+ return;
+ }
+ vs = g_malloc0(sizeof(*vs));
vs->id = strdup(id);
QTAILQ_INSERT_TAIL(&vnc_displays, vs, next);
@@ -3065,14 +3071,65 @@ char *vnc_display_local_addr(const char *id)
return vnc_socket_local_addr("%s:%s", vs->lsock);
}
-void vnc_display_open(const char *id, const char *display, Error **errp)
+static QemuOptsList qemu_vnc_opts = {
+ .name = "vnc",
+ .head = QTAILQ_HEAD_INITIALIZER(qemu_vnc_opts.head),
+ .implied_opt_name = "vnc",
+ .desc = {
+ {
+ .name = "vnc",
+ .type = QEMU_OPT_STRING,
+ },{
+ .name = "websocket",
+ .type = QEMU_OPT_STRING,
+ },{
+ .name = "x509",
+ .type = QEMU_OPT_STRING,
+ },{
+ .name = "share",
+ .type = QEMU_OPT_STRING,
+ },{
+ .name = "password",
+ .type = QEMU_OPT_BOOL,
+ },{
+ .name = "reverse",
+ .type = QEMU_OPT_BOOL,
+ },{
+ .name = "lock-key-sync",
+ .type = QEMU_OPT_BOOL,
+ },{
+ .name = "sasl",
+ .type = QEMU_OPT_BOOL,
+ },{
+ .name = "tls",
+ .type = QEMU_OPT_BOOL,
+ },{
+ .name = "x509verify",
+ .type = QEMU_OPT_BOOL,
+ },{
+ .name = "acl",
+ .type = QEMU_OPT_BOOL,
+ },{
+ .name = "lossy",
+ .type = QEMU_OPT_BOOL,
+ },{
+ .name = "non-adaptive",
+ .type = QEMU_OPT_BOOL,
+ },
+ { /* end of list */ }
+ },
+};
+
+void vnc_display_open(const char *id, Error **errp)
{
VncDisplay *vs = vnc_display_find(id);
- const char *options;
+ QemuOpts *opts = qemu_opts_find(&qemu_vnc_opts, id);
+ const char *display, *websocket, *share;
int password = 0;
int reverse = 0;
#ifdef CONFIG_VNC_TLS
int tls = 0, x509 = 0;
+ const char *path;
#endif
#ifdef CONFIG_VNC_SASL
int sasl = 0;
@@ -3088,115 +3145,86 @@ void vnc_display_open(const char *id, const char *display, Error **errp)
return;
}
vnc_display_close(vs);
- if (strcmp(display, "none") == 0)
- return;
+ if (!opts) {
+ return;
+ }
+ display = qemu_opt_get(opts, "vnc");
+ if (!display || strcmp(display, "none") == 0) {
+ return;
+ }
vs->display = g_strdup(display);
- vs->share_policy = VNC_SHARE_POLICY_ALLOW_EXCLUSIVE;
-
- options = display;
- while ((options = strchr(options, ','))) {
- options++;
- if (strncmp(options, "password", 8) == 0) {
- if (fips_get_state()) {
- error_setg(errp,
- "VNC password auth disabled due to FIPS mode, "
- "consider using the VeNCrypt or SASL authentication "
- "methods as an alternative");
- goto fail;
- }
- password = 1; /* Require password auth */
- } else if (strncmp(options, "reverse", 7) == 0) {
- reverse = 1;
- } else if (strncmp(options, "no-lock-key-sync", 16) == 0) {
- lock_key_sync = 0;
+
+ password = qemu_opt_get_bool(opts, "password", false);
+ if (password && fips_get_state()) {
+ error_setg(errp,
+ "VNC password auth disabled due to FIPS mode, "
+ "consider using the VeNCrypt or SASL authentication "
+ "methods as an alternative");
+ goto fail;
+ }
+
+ reverse = qemu_opt_get_bool(opts, "reverse", false);
+ lock_key_sync = qemu_opt_get_bool(opts, "lock-key-sync", true);
#ifdef CONFIG_VNC_SASL
- } else if (strncmp(options, "sasl", 4) == 0) {
- sasl = 1; /* Require SASL auth */
+ sasl = qemu_opt_get_bool(opts, "sasl", false);
#endif
-#ifdef CONFIG_VNC_WS
- } else if (strncmp(options, "websocket", 9) == 0) {
- char *start, *end;
- vs->websocket = 1;
-
- /* Check for 'websocket=<port>' */
- start = strchr(options, '=');
- end = strchr(options, ',');
- if (start && (!end || (start < end))) {
- int len = end ? end-(start+1) : strlen(start+1);
- if (len < 6) {
- /* extract the host specification from display */
- char *host = NULL, *port = NULL, *host_end = NULL;
- port = g_strndup(start + 1, len);
-
- /* ipv6 hosts have colons */
- end = strchr(display, ',');
- host_end = g_strrstr_len(display, end - display, ":");
-
- if (host_end) {
- host = g_strndup(display, host_end - display + 1);
- } else {
- host = g_strndup(":", 1);
- }
- vs->ws_display = g_strconcat(host, port, NULL);
- g_free(host);
- g_free(port);
- }
- }
-#endif /* CONFIG_VNC_WS */
#ifdef CONFIG_VNC_TLS
- } else if (strncmp(options, "tls", 3) == 0) {
- tls = 1; /* Require TLS */
- } else if (strncmp(options, "x509", 4) == 0) {
- char *start, *end;
- x509 = 1; /* Require x509 certificates */
- if (strncmp(options, "x509verify", 10) == 0)
- vs->tls.x509verify = 1; /* ...and verify client certs */
-
- /* Now check for 'x509=/some/path' postfix
- * and use that to setup x509 certificate/key paths */
- start = strchr(options, '=');
- end = strchr(options, ',');
- if (start && (!end || (start < end))) {
- int len = end ? end-(start+1) : strlen(start+1);
- char *path = g_strndup(start + 1, len);
-
- VNC_DEBUG("Trying certificate path '%s'\n", path);
- if (vnc_tls_set_x509_creds_dir(vs, path) < 0) {
- error_setg(errp, "Failed to find x509 certificates/keys in %s", path);
- g_free(path);
- goto fail;
- }
- g_free(path);
- } else {
- error_setg(errp, "No certificate path provided");
- goto fail;
- }
+ tls = qemu_opt_get_bool(opts, "tls", false);
+ path = qemu_opt_get(opts, "x509");
+ if (path) {
+ x509 = 1;
+ vs->tls.x509verify = qemu_opt_get_bool(opts, "x509verify", false);
+ if (vnc_tls_set_x509_creds_dir(vs, path) < 0) {
+ error_setg(errp, "Failed to find x509 certificates/keys in %s",
+ path);
+ goto fail;
+ }
+ }
#endif
#if defined(CONFIG_VNC_TLS) || defined(CONFIG_VNC_SASL)
- } else if (strncmp(options, "acl", 3) == 0) {
- acl = 1;
-#endif
- } else if (strncmp(options, "lossy", 5) == 0) {
-#ifdef CONFIG_VNC_JPEG
- vs->lossy = true;
+ acl = qemu_opt_get_bool(opts, "acl", false);
#endif
- } else if (strncmp(options, "non-adaptive", 12) == 0) {
- vs->non_adaptive = true;
- } else if (strncmp(options, "share=", 6) == 0) {
- if (strncmp(options+6, "ignore", 6) == 0) {
- vs->share_policy = VNC_SHARE_POLICY_IGNORE;
- } else if (strncmp(options+6, "allow-exclusive", 15) == 0) {
- vs->share_policy = VNC_SHARE_POLICY_ALLOW_EXCLUSIVE;
- } else if (strncmp(options+6, "force-shared", 12) == 0) {
- vs->share_policy = VNC_SHARE_POLICY_FORCE_SHARED;
- } else {
- error_setg(errp, "unknown vnc share= option");
- goto fail;
- }
+
+ share = qemu_opt_get(opts, "share");
+ if (share) {
+ if (strcmp(share, "ignore") == 0) {
+ vs->share_policy = VNC_SHARE_POLICY_IGNORE;
+ } else if (strcmp(share, "allow-exclusive") == 0) {
+ vs->share_policy = VNC_SHARE_POLICY_ALLOW_EXCLUSIVE;
+ } else if (strcmp(share, "force-shared") == 0) {
+ vs->share_policy = VNC_SHARE_POLICY_FORCE_SHARED;
+ } else {
+ error_setg(errp, "unknown vnc share= option");
+ goto fail;
+ }
+ } else {
+ vs->share_policy = VNC_SHARE_POLICY_ALLOW_EXCLUSIVE;
+ }
+
+ #ifdef CONFIG_VNC_WS
+ websocket = qemu_opt_get(opts, "websocket");
+ if (websocket) {
+ /* extract the host specification from display */
+ char *host = NULL, *host_end = NULL;
+ vs->websocket = 1;
+
+ /* ipv6 hosts have colons */
+ host_end = strrchr(display, ':');
+ if (host_end) {
+ host = g_strndup(display, host_end - display + 1);
+ } else {
+ host = g_strdup(":");
}
+ vs->ws_display = g_strconcat(host, websocket, NULL);
+ g_free(host);
}
+#endif /* CONFIG_VNC_WS */
+#ifdef CONFIG_VNC_JPEG
+ vs->lossy = qemu_opt_get_bool(opts, "lossy", false);
+#endif
+ vs->non_adaptive = qemu_opt_get_bool(opts, "non-adaptive", false);
/* adaptive updates are only used with tight encoding and
* if lossy updates are enabled so we can disable all the
* calculations otherwise */
@@ -3407,3 +3435,43 @@ void vnc_display_add_client(const char *id, int csock, bool skipauth)
}
vnc_connect(vs, csock, skipauth, false);
}
+
+QemuOpts *vnc_parse_func(const char *str)
+{
+ return qemu_opts_parse(qemu_find_opts("vnc"), str, 1);
+}
+
+int vnc_init_func(QemuOpts *opts, void *opaque)
+{
+ Error *local_err = NULL;
+ QemuOptsList *olist = qemu_find_opts("vnc");
+ char *id = (char *)qemu_opts_id(opts);
+
+ if (!id) {
+ /* auto-assign id if not present */
+ int i = 2;
+ id = g_strdup("default");
+ while (qemu_opts_find(olist, id)) {
+ g_free(id);
+ id = g_strdup_printf("vnc%d", i++);
+ }
+ qemu_opts_set_id(opts, id);
+ }
+
+ vnc_display_init(id);
+ vnc_display_open(id, &local_err);
+ if (local_err != NULL) {
+ error_report("Failed to start VNC server on `%s': %s",
+ qemu_opt_get(opts, "display"),
+ error_get_pretty(local_err));
+ error_free(local_err);
+ exit(1);
+ }
+ return 0;
+}
+
+static void vnc_register_config(void)
+{
+ qemu_add_opts(&qemu_vnc_opts);
+}
+machine_init(vnc_register_config);
diff --git a/vl.c b/vl.c
index afb6212..a7d4a57 100644
--- a/vl.c
+++ b/vl.c
@@ -158,9 +158,6 @@ int smp_cpus = 1;
int max_cpus = 0;
int smp_cores = 1;
int smp_threads = 1;
-#ifdef CONFIG_VNC
-const char *vnc_display;
-#endif
int acpi_enabled = 1;
int no_hpet = 0;
int fd_bootchk = 1;
@@ -2103,16 +2100,12 @@ static DisplayType select_display(const char *p)
#endif
} else if (strstart(p, "vnc", &opts)) {
#ifdef CONFIG_VNC
- display_remote++;
-
- if (*opts) {
- const char *nextopt;
-
- if (strstart(opts, "=", &nextopt)) {
- vnc_display = nextopt;
+ if (*opts == '=') {
+ display_remote++;
+ if (vnc_parse_func(opts+1) == NULL) {
+ exit(1);
}
- }
- if (!vnc_display) {
+ } else {
fprintf(stderr, "VNC requires a display argument vnc=<display>\n");
exit(1);
}
@@ -3585,7 +3578,9 @@ int main(int argc, char **argv, char **envp)
case QEMU_OPTION_vnc:
#ifdef CONFIG_VNC
display_remote++;
- vnc_display = optarg;
+ if (vnc_parse_func(optarg) == NULL) {
+ exit(1);
+ }
#else
fprintf(stderr, "VNC support is disabled\n");
exit(1);
@@ -4069,7 +4064,7 @@ int main(int argc, char **argv, char **envp)
#elif defined(CONFIG_SDL) || defined(CONFIG_COCOA)
display_type = DT_SDL;
#elif defined(CONFIG_VNC)
- vnc_display = "localhost:0,to=99";
+ vnc_parse_func("localhost:0,to=99,id=default");
show_vnc_port = 1;
#else
display_type = DT_NONE;
@@ -4374,21 +4369,10 @@ int main(int argc, char **argv, char **envp)
#ifdef CONFIG_VNC
/* init remote displays */
- if (vnc_display) {
- Error *local_err = NULL;
- const char *id = "default";
- vnc_display_init(id);
- vnc_display_open(id, vnc_display, &local_err);
- if (local_err != NULL) {
- error_report("Failed to start VNC server on `%s': %s",
- vnc_display, error_get_pretty(local_err));
- error_free(local_err);
- exit(1);
- }
-
- if (show_vnc_port) {
- printf("VNC server running on `%s'\n", vnc_display_local_addr(id));
- }
+ qemu_opts_foreach(qemu_find_opts("vnc"), vnc_init_func, NULL, 0);
+ if (show_vnc_port) {
+ printf("VNC server running on `%s'\n",
+ vnc_display_local_addr("default"));
}
#endif
#ifdef CONFIG_SPICE
--
1.8.3.1
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [Qemu-devel] [PULL 05/10] vnc: allow binding servers to qemu consoles
2014-12-19 9:04 [Qemu-devel] [PULL 00/10] vnc: add support for multiple vnc displays Gerd Hoffmann
` (3 preceding siblings ...)
2014-12-19 9:04 ` [Qemu-devel] [PULL 04/10] vnc: switch to QemuOpts, allow multiple servers Gerd Hoffmann
@ 2014-12-19 9:04 ` Gerd Hoffmann
2014-12-19 9:04 ` [Qemu-devel] [PULL 06/10] vnc: update docs/multiseat.txt Gerd Hoffmann
` (5 subsequent siblings)
10 siblings, 0 replies; 22+ messages in thread
From: Gerd Hoffmann @ 2014-12-19 9:04 UTC (permalink / raw)
To: qemu-devel; +Cc: Gerd Hoffmann, Anthony Liguori
This patch adds a display= parameter to the vnc options. This allows to
bind a vnc server instance to a specific display, allowing to create a
multiseat setup with a vnc server for each seat.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
ui/vnc.c | 50 +++++++++++++++++++++++++++++++++++++++++++-------
1 file changed, 43 insertions(+), 7 deletions(-)
diff --git a/ui/vnc.c b/ui/vnc.c
index ce1dd59..dd09fc1 100644
--- a/ui/vnc.c
+++ b/ui/vnc.c
@@ -27,6 +27,7 @@
#include "vnc.h"
#include "vnc-jobs.h"
#include "trace.h"
+#include "hw/qdev.h"
#include "sysemu/sysemu.h"
#include "qemu/sockets.h"
#include "qemu/timer.h"
@@ -1665,7 +1666,8 @@ static void do_key_event(VncState *vs, int down, int keycode, int sym)
vs->modifiers_state[keycode] = 0;
break;
case 0x02 ... 0x0a: /* '1' to '9' keys */
- if (down && vs->modifiers_state[0x1d] && vs->modifiers_state[0x38]) {
+ if (vs->vd->dcl.con == NULL &&
+ down && vs->modifiers_state[0x1d] && vs->modifiers_state[0x38]) {
/* Reset the modifiers sent to the current console */
reset_keys(vs);
console_select(keycode - 0x02);
@@ -2073,8 +2075,8 @@ static void set_pixel_format(VncState *vs,
set_pixel_conversion(vs);
- graphic_hw_invalidate(NULL);
- graphic_hw_update(NULL);
+ graphic_hw_invalidate(vs->vd->dcl.con);
+ graphic_hw_update(vs->vd->dcl.con);
}
static void pixel_format_message (VncState *vs) {
@@ -2801,7 +2803,7 @@ static void vnc_refresh(DisplayChangeListener *dcl)
return;
}
- graphic_hw_update(NULL);
+ graphic_hw_update(vd->dcl.con);
if (vnc_trylock_display(vd)) {
update_displaychangelistener(&vd->dcl, VNC_REFRESH_INTERVAL_BASE);
@@ -2907,7 +2909,7 @@ void vnc_init_state(VncState *vs)
QTAILQ_INSERT_HEAD(&vd->clients, vs, next);
- graphic_hw_update(NULL);
+ graphic_hw_update(vd->dcl.con);
vnc_write(vs, "RFB 003.008\n", 12);
vnc_flush(vs);
@@ -2930,7 +2932,7 @@ static void vnc_listen_read(void *opaque, bool websocket)
int csock;
/* Catch-up */
- graphic_hw_update(NULL);
+ graphic_hw_update(vs->dcl.con);
#ifdef CONFIG_VNC_WS
if (websocket) {
csock = qemu_accept(vs->lwebsock, (struct sockaddr *)&addr, &addrlen);
@@ -3089,6 +3091,12 @@ static QemuOptsList qemu_vnc_opts = {
.name = "share",
.type = QEMU_OPT_STRING,
},{
+ .name = "display",
+ .type = QEMU_OPT_STRING,
+ },{
+ .name = "head",
+ .type = QEMU_OPT_NUMBER,
+ },{
.name = "password",
.type = QEMU_OPT_BOOL,
},{
@@ -3124,7 +3132,8 @@ void vnc_display_open(const char *id, Error **errp)
{
VncDisplay *vs = vnc_display_find(id);
QemuOpts *opts = qemu_opts_find(&qemu_vnc_opts, id);
- const char *display, *websocket, *share;
+ const char *display, *websocket, *share, *device_id;
+ QemuConsole *con;
int password = 0;
int reverse = 0;
#ifdef CONFIG_VNC_TLS
@@ -3353,6 +3362,33 @@ void vnc_display_open(const char *id, Error **errp)
#endif
vs->lock_key_sync = lock_key_sync;
+ device_id = qemu_opt_get(opts, "display");
+ if (device_id) {
+ DeviceState *dev;
+ int head = qemu_opt_get_number(opts, "head", 0);
+
+ dev = qdev_find_recursive(sysbus_get_default(), device_id);
+ if (dev == NULL) {
+ error_set(errp, QERR_DEVICE_NOT_FOUND, device_id);
+ goto fail;
+ }
+
+ con = qemu_console_lookup_by_device(dev, head);
+ if (con == NULL) {
+ error_setg(errp, "Device %s is not bound to a QemuConsole",
+ device_id);
+ goto fail;
+ }
+ } else {
+ con = NULL;
+ }
+
+ if (con != vs->dcl.con) {
+ unregister_displaychangelistener(&vs->dcl);
+ vs->dcl.con = con;
+ register_displaychangelistener(&vs->dcl);
+ }
+
if (reverse) {
/* connect to viewer */
int csock;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [Qemu-devel] [PULL 06/10] vnc: update docs/multiseat.txt
2014-12-19 9:04 [Qemu-devel] [PULL 00/10] vnc: add support for multiple vnc displays Gerd Hoffmann
` (4 preceding siblings ...)
2014-12-19 9:04 ` [Qemu-devel] [PULL 05/10] vnc: allow binding servers to qemu consoles Gerd Hoffmann
@ 2014-12-19 9:04 ` Gerd Hoffmann
2014-12-19 9:04 ` [Qemu-devel] [PULL 07/10] vnc: track & limit connections Gerd Hoffmann
` (4 subsequent siblings)
10 siblings, 0 replies; 22+ messages in thread
From: Gerd Hoffmann @ 2014-12-19 9:04 UTC (permalink / raw)
To: qemu-devel; +Cc: Gerd Hoffmann
vnc joins the party ;)
Also some s/head/seat/ to clarify.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
docs/multiseat.txt | 18 ++++++++++++++----
1 file changed, 14 insertions(+), 4 deletions(-)
diff --git a/docs/multiseat.txt b/docs/multiseat.txt
index 67151e0..b963665 100644
--- a/docs/multiseat.txt
+++ b/docs/multiseat.txt
@@ -7,7 +7,7 @@ host side
First you must compile qemu with a user interface supporting
multihead/multiseat and input event routing. Right now this
-list includes sdl2 and gtk (both 2+3):
+list includes sdl2, gtk (both 2+3) and vnc:
./configure --enable-sdl --with-sdlabi=2.0
@@ -16,16 +16,16 @@ or
./configure --enable-gtk
-Next put together the qemu command line:
+Next put together the qemu command line (sdk/gtk):
qemu -enable-kvm -usb $memory $disk $whatever \
-display [ sdl | gtk ] \
-vga std \
-device usb-tablet
-That is it for the first head, which will use the standard vga, the
+That is it for the first seat, which will use the standard vga, the
standard ps/2 keyboard (implicitly there) and the usb-tablet. Now the
-additional switches for the second head:
+additional switches for the second seat:
-device pci-bridge,addr=12.0,chassis_nr=2,id=head.2 \
-device secondary-vga,bus=head.2,addr=02.0,id=video.2 \
@@ -47,6 +47,16 @@ in a separate tab. You can either simply switch tabs to switch heads,
or use the "View / Detach tab" menu item to move one of the displays
to its own window so you can see both display devices side-by-side.
+For vnc some additional configuration on the command line is needed.
+We'll create two vnc server instances, and bind the second one to the
+second seat, simliar to input devices:
+
+ -display vnc=:1,id=primary \
+ -display vnc=:2,id=secondary,display=video.2
+
+Connecting to vnc display :1 gives you access to the first seat, and
+likewise connecting to vnc display :2 shows the second seat.
+
Note on spice: Spice handles multihead just fine. But it can't do
multiseat. For tablet events the event source is sent to the spice
agent. But qemu can't figure it, so it can't do input routing.
--
1.8.3.1
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [Qemu-devel] [PULL 07/10] vnc: track & limit connections
2014-12-19 9:04 [Qemu-devel] [PULL 00/10] vnc: add support for multiple vnc displays Gerd Hoffmann
` (5 preceding siblings ...)
2014-12-19 9:04 ` [Qemu-devel] [PULL 06/10] vnc: update docs/multiseat.txt Gerd Hoffmann
@ 2014-12-19 9:04 ` Gerd Hoffmann
2014-12-19 9:04 ` [Qemu-devel] [PULL 08/10] vnc: factor out qmp_query_client_list Gerd Hoffmann
` (3 subsequent siblings)
10 siblings, 0 replies; 22+ messages in thread
From: Gerd Hoffmann @ 2014-12-19 9:04 UTC (permalink / raw)
To: qemu-devel; +Cc: Gerd Hoffmann, Anthony Liguori, Dr. David Alan Gilbert
Also track the number of connections in "connecting" and "shared" state
(in addition to the "exclusive" state). Apply a configurable limit to
these connections.
The logic to apply the limit to connections in "shared" state is pretty
simple: When the limit is reached no new connections are allowed.
The logic to apply the limit to connections in "connecting" state (this
is the state you are in *before* successful authentication) is
slightly different: A new connect kicks out the oldest client which is
still in "connecting" state. This avoids a easy DoS by unauthenticated
users by simply opening connections until the limit is reached.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
ui/vnc.c | 46 +++++++++++++++++++++++++++++++++++++++++++---
ui/vnc.h | 3 +++
2 files changed, 46 insertions(+), 3 deletions(-)
diff --git a/ui/vnc.c b/ui/vnc.c
index dd09fc1..2ed16dc 100644
--- a/ui/vnc.c
+++ b/ui/vnc.c
@@ -68,12 +68,34 @@ static void vnc_set_share_mode(VncState *vs, VncShareMode mode)
vs->csock, mn[vs->share_mode], mn[mode]);
#endif
- if (vs->share_mode == VNC_SHARE_MODE_EXCLUSIVE) {
+ switch (vs->share_mode) {
+ case VNC_SHARE_MODE_CONNECTING:
+ vs->vd->num_connecting--;
+ break;
+ case VNC_SHARE_MODE_SHARED:
+ vs->vd->num_shared--;
+ break;
+ case VNC_SHARE_MODE_EXCLUSIVE:
vs->vd->num_exclusive--;
+ break;
+ default:
+ break;
}
+
vs->share_mode = mode;
- if (vs->share_mode == VNC_SHARE_MODE_EXCLUSIVE) {
+
+ switch (vs->share_mode) {
+ case VNC_SHARE_MODE_CONNECTING:
+ vs->vd->num_connecting++;
+ break;
+ case VNC_SHARE_MODE_SHARED:
+ vs->vd->num_shared++;
+ break;
+ case VNC_SHARE_MODE_EXCLUSIVE:
vs->vd->num_exclusive++;
+ break;
+ default:
+ break;
}
}
@@ -2337,6 +2359,11 @@ static int protocol_client_init(VncState *vs, uint8_t *data, size_t len)
}
vnc_set_share_mode(vs, mode);
+ if (vs->vd->num_shared > vs->vd->connections_limit) {
+ vnc_disconnect_start(vs);
+ return 0;
+ }
+
vs->client_width = pixman_image_get_width(vs->vd->server);
vs->client_height = pixman_image_get_height(vs->vd->server);
vnc_write_u16(vs, vs->client_width);
@@ -2889,6 +2916,15 @@ static void vnc_connect(VncDisplay *vd, int csock,
{
vnc_init_state(vs);
}
+
+ if (vd->num_connecting > vd->connections_limit) {
+ QTAILQ_FOREACH(vs, &vd->clients, next) {
+ if (vs->share_mode == VNC_SHARE_MODE_CONNECTING) {
+ vnc_disconnect_start(vs);
+ return;
+ }
+ }
+ }
}
void vnc_init_state(VncState *vs)
@@ -2907,7 +2943,7 @@ void vnc_init_state(VncState *vs)
qemu_mutex_init(&vs->output_mutex);
vs->bh = qemu_bh_new(vnc_jobs_bh, vs);
- QTAILQ_INSERT_HEAD(&vd->clients, vs, next);
+ QTAILQ_INSERT_TAIL(&vd->clients, vs, next);
graphic_hw_update(vd->dcl.con);
@@ -3097,6 +3133,9 @@ static QemuOptsList qemu_vnc_opts = {
.name = "head",
.type = QEMU_OPT_NUMBER,
},{
+ .name = "connections",
+ .type = QEMU_OPT_NUMBER,
+ },{
.name = "password",
.type = QEMU_OPT_BOOL,
},{
@@ -3210,6 +3249,7 @@ void vnc_display_open(const char *id, Error **errp)
} else {
vs->share_policy = VNC_SHARE_POLICY_ALLOW_EXCLUSIVE;
}
+ vs->connections_limit = qemu_opt_get_number(opts, "connections", 32);
#ifdef CONFIG_VNC_WS
websocket = qemu_opt_get(opts, "websocket");
diff --git a/ui/vnc.h b/ui/vnc.h
index 6fe8278..5e2b1a5 100644
--- a/ui/vnc.h
+++ b/ui/vnc.h
@@ -150,7 +150,10 @@ typedef enum VncSharePolicy {
struct VncDisplay
{
QTAILQ_HEAD(, VncState) clients;
+ int num_connecting;
+ int num_shared;
int num_exclusive;
+ int connections_limit;
VncSharePolicy share_policy;
int lsock;
#ifdef CONFIG_VNC_WS
--
1.8.3.1
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [Qemu-devel] [PULL 08/10] vnc: factor out qmp_query_client_list
2014-12-19 9:04 [Qemu-devel] [PULL 00/10] vnc: add support for multiple vnc displays Gerd Hoffmann
` (6 preceding siblings ...)
2014-12-19 9:04 ` [Qemu-devel] [PULL 07/10] vnc: track & limit connections Gerd Hoffmann
@ 2014-12-19 9:04 ` Gerd Hoffmann
2014-12-19 9:04 ` [Qemu-devel] [PULL 09/10] monitor: add query-vnc2 command Gerd Hoffmann
` (2 subsequent siblings)
10 siblings, 0 replies; 22+ messages in thread
From: Gerd Hoffmann @ 2014-12-19 9:04 UTC (permalink / raw)
To: qemu-devel; +Cc: Gerd Hoffmann, Anthony Liguori
so we can reuse it for the new vnc query command.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
ui/vnc.c | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/ui/vnc.c b/ui/vnc.c
index 2ed16dc..d7c7865 100644
--- a/ui/vnc.c
+++ b/ui/vnc.c
@@ -385,6 +385,20 @@ static VncDisplay *vnc_display_find(const char *id)
return NULL;
}
+static VncClientInfoList *qmp_query_client_list(VncDisplay *vd)
+{
+ VncClientInfoList *cinfo, *prev = NULL;
+ VncState *client;
+
+ QTAILQ_FOREACH(client, &vd->clients, next) {
+ cinfo = g_new0(VncClientInfoList, 1);
+ cinfo->value = qmp_query_vnc_client(client);
+ cinfo->next = prev;
+ prev = cinfo;
+ }
+ return prev;
+}
+
VncInfo *qmp_query_vnc(Error **errp)
{
VncInfo *info = g_malloc0(sizeof(*info));
@@ -393,30 +407,16 @@ VncInfo *qmp_query_vnc(Error **errp)
if (vd == NULL || vd->display == NULL) {
info->enabled = false;
} else {
- VncClientInfoList *cur_item = NULL;
struct sockaddr_storage sa;
socklen_t salen = sizeof(sa);
char host[NI_MAXHOST];
char serv[NI_MAXSERV];
- VncState *client;
info->enabled = true;
/* for compatibility with the original command */
info->has_clients = true;
-
- QTAILQ_FOREACH(client, &vd->clients, next) {
- VncClientInfoList *cinfo = g_malloc0(sizeof(*info));
- cinfo->value = qmp_query_vnc_client(client);
-
- /* XXX: waiting for the qapi to support GSList */
- if (!cur_item) {
- info->clients = cur_item = cinfo;
- } else {
- cur_item->next = cinfo;
- cur_item = cinfo;
- }
- }
+ info->clients = qmp_query_client_list(vd);
if (vd->lsock == -1) {
return info;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [Qemu-devel] [PULL 09/10] monitor: add query-vnc2 command
2014-12-19 9:04 [Qemu-devel] [PULL 00/10] vnc: add support for multiple vnc displays Gerd Hoffmann
` (7 preceding siblings ...)
2014-12-19 9:04 ` [Qemu-devel] [PULL 08/10] vnc: factor out qmp_query_client_list Gerd Hoffmann
@ 2014-12-19 9:04 ` Gerd Hoffmann
2014-12-19 13:04 ` Markus Armbruster
2014-12-19 9:04 ` [Qemu-devel] [PULL 10/10] monitor: add vnc websockets Gerd Hoffmann
2014-12-19 12:51 ` [Qemu-devel] [PULL 00/10] vnc: add support for multiple vnc displays Markus Armbruster
10 siblings, 1 reply; 22+ messages in thread
From: Gerd Hoffmann @ 2014-12-19 9:04 UTC (permalink / raw)
To: qemu-devel
Cc: Markus Armbruster, Gerd Hoffmann, Anthony Liguori, Luiz Capitulino
Add new query vnc qmp command, for the lack of better ideas just name it
"query-vnc2". Changes over query-vnc:
* It returns a list of vnc servers, so multiple vnc server instances
are covered.
* Each vnc server returns a list of server sockets. Followup patch
will use that to also report websockets. In case we add support for
multiple server sockets server sockets (to better support ipv4+ipv6
dualstack) we can add them to the list too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
qapi-schema.json | 68 ++++++++++++++++++++++++++++
qmp-commands.hx | 5 +++
ui/vnc.c | 133 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 206 insertions(+)
diff --git a/qapi-schema.json b/qapi-schema.json
index 563b4ad..2d45d4c 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -751,6 +751,63 @@
'*service': 'str', '*auth': 'str', '*clients': ['VncClientInfo']} }
##
+# @VncPriAuth:
+#
+# vnc primary authentication method.
+#
+# Since: 2.3
+##
+{ 'enum': 'VncPriAuth',
+ 'data': [ 'none', 'vnc', 'ra2', 'ra2ne', 'tight', 'ultra',
+ 'tls', 'vencrypt', 'sasl' ] }
+
+##
+# @VncVencryptSubAuth:
+#
+# vnc sub authentication method with vencrypt.
+#
+# Since: 2.3
+##
+{ 'enum': 'VncVencryptSubAuth',
+ 'data': [ 'plain',
+ 'tls-none', 'x509-none',
+ 'tls-vnc', 'x509-vnc',
+ 'tls-plain', 'x509-plain',
+ 'tls-sasl', 'x509-sasl' ] }
+
+##
+# @VncInfo2:
+#
+# Information about a vnc server
+#
+# @id: vnc server name.
+#
+# @server: A list of @VncBasincInfo describing all listening sockets.
+# The list can be empty (in case the vnc server is disabled).
+# It also may have multiple entries: normal + websocket,
+# possibly also ipv4 + ipv6 in the future.
+#
+# @clients: A list of @VncClientInfo of all currently connected clients.
+# The list can be empty, for obvious reasons.
+#
+# @auth: The current authentication type used by the server
+#
+# @vencrypt: #optional The vencrypt sub authentication type used by the server,
+# only specified in case auth == vencrypt.
+#
+# @display: #optional The display device the vnc server is linked to.
+#
+# Since: 2.3
+##
+{ 'type': 'VncInfo2',
+ 'data': { 'id' : 'str',
+ 'server' : ['VncBasicInfo'],
+ 'clients' : ['VncClientInfo'],
+ 'auth' : 'VncPriAuth',
+ '*vencrypt' : 'VncVencryptSubAuth',
+ '*display' : 'str' } }
+
+##
# @query-vnc:
#
# Returns information about the current VNC server
@@ -762,6 +819,17 @@
{ 'command': 'query-vnc', 'returns': 'VncInfo' }
##
+# @query-vnc2:
+#
+# Returns a list of vnc servers. The list can be empty.
+#
+# Returns: @VncInfo
+#
+# Since: 2.3
+##
+{ 'command': 'query-vnc2', 'returns': ['VncInfo2'] }
+
+##
# @SpiceBasicInfo
#
# The basic information for SPICE network connection
diff --git a/qmp-commands.hx b/qmp-commands.hx
index 3348782..dec288a 100644
--- a/qmp-commands.hx
+++ b/qmp-commands.hx
@@ -2825,6 +2825,11 @@ EQMP
.args_type = "",
.mhandler.cmd_new = qmp_marshal_input_query_vnc,
},
+ {
+ .name = "query-vnc2",
+ .args_type = "",
+ .mhandler.cmd_new = qmp_marshal_input_query_vnc2,
+ },
SQMP
query-spice
diff --git a/ui/vnc.c b/ui/vnc.c
index d7c7865..e730059 100644
--- a/ui/vnc.c
+++ b/ui/vnc.c
@@ -456,6 +456,139 @@ out_error:
return NULL;
}
+static VncBasicInfoList *qmp_query_server_entry(int socket,
+ VncBasicInfoList *prev)
+{
+ VncBasicInfoList *list;
+ VncBasicInfo *info;
+ struct sockaddr_storage sa;
+ socklen_t salen = sizeof(sa);
+ char host[NI_MAXHOST];
+ char serv[NI_MAXSERV];
+
+ if (getsockname(socket, (struct sockaddr *)&sa, &salen) < 0 ||
+ getnameinfo((struct sockaddr *)&sa, salen,
+ host, sizeof(host), serv, sizeof(serv),
+ NI_NUMERICHOST | NI_NUMERICSERV) < 0) {
+ return prev;
+ }
+
+ info = g_new0(VncBasicInfo, 1);
+ info->host = g_strdup(host);
+ info->service = g_strdup(serv);
+ info->family = inet_netfamily(sa.ss_family);
+
+ list = g_new0(VncBasicInfoList, 1);
+ list->value = info;
+ list->next = prev;
+ return list;
+}
+
+static void qmp_query_auth(VncDisplay *vd, VncInfo2 *info)
+{
+ switch (vd->auth) {
+ case VNC_AUTH_VNC:
+ info->auth = VNC_PRI_AUTH_VNC;
+ break;
+ case VNC_AUTH_RA2:
+ info->auth = VNC_PRI_AUTH_RA2;
+ break;
+ case VNC_AUTH_RA2NE:
+ info->auth = VNC_PRI_AUTH_RA2NE;
+ break;
+ case VNC_AUTH_TIGHT:
+ info->auth = VNC_PRI_AUTH_TIGHT;
+ break;
+ case VNC_AUTH_ULTRA:
+ info->auth = VNC_PRI_AUTH_ULTRA;
+ break;
+ case VNC_AUTH_TLS:
+ info->auth = VNC_PRI_AUTH_TLS;
+ break;
+ case VNC_AUTH_VENCRYPT:
+ info->auth = VNC_PRI_AUTH_VENCRYPT;
+#ifdef CONFIG_VNC_TLS
+ info->has_vencrypt = true;
+ switch (vd->subauth) {
+ case VNC_AUTH_VENCRYPT_PLAIN:
+ info->vencrypt = VNC_VENCRYPT_SUB_AUTH_PLAIN;
+ break;
+ case VNC_AUTH_VENCRYPT_TLSNONE:
+ info->vencrypt = VNC_VENCRYPT_SUB_AUTH_TLS_NONE;
+ break;
+ case VNC_AUTH_VENCRYPT_TLSVNC:
+ info->vencrypt = VNC_VENCRYPT_SUB_AUTH_TLS_VNC;
+ break;
+ case VNC_AUTH_VENCRYPT_TLSPLAIN:
+ info->vencrypt = VNC_VENCRYPT_SUB_AUTH_TLS_PLAIN;
+ break;
+ case VNC_AUTH_VENCRYPT_X509NONE:
+ info->vencrypt = VNC_VENCRYPT_SUB_AUTH_X509_NONE;
+ break;
+ case VNC_AUTH_VENCRYPT_X509VNC:
+ info->vencrypt = VNC_VENCRYPT_SUB_AUTH_X509_VNC;
+ break;
+ case VNC_AUTH_VENCRYPT_X509PLAIN:
+ info->vencrypt = VNC_VENCRYPT_SUB_AUTH_X509_PLAIN;
+ break;
+ case VNC_AUTH_VENCRYPT_TLSSASL:
+ info->vencrypt = VNC_VENCRYPT_SUB_AUTH_TLS_SASL;
+ break;
+ case VNC_AUTH_VENCRYPT_X509SASL:
+ info->vencrypt = VNC_VENCRYPT_SUB_AUTH_X509_SASL;
+ break;
+ default:
+ info->has_vencrypt = false;
+ break;
+ }
+#endif
+ break;
+ case VNC_AUTH_SASL:
+ info->auth = VNC_PRI_AUTH_SASL;
+ break;
+ case VNC_AUTH_NONE:
+ default:
+ info->auth = VNC_PRI_AUTH_NONE;
+ break;
+ }
+}
+
+VncInfo2List *qmp_query_vnc2(Error **errp)
+{
+ VncInfo2List *item, *prev = NULL;
+ VncInfo2 *info;
+ VncDisplay *vd;
+ DeviceState *dev;
+
+ QTAILQ_FOREACH(vd, &vnc_displays, next) {
+ info = g_new0(VncInfo2, 1);
+ info->id = g_strdup(vd->id);
+ info->clients = qmp_query_client_list(vd);
+ qmp_query_auth(vd, info);
+ if (vd->dcl.con) {
+ dev = DEVICE(object_property_get_link(OBJECT(vd->dcl.con),
+ "device", NULL));
+ info->has_display = true;
+ info->display = g_strdup(dev->id);
+ }
+ if (vd->lsock != -1) {
+ info->server = qmp_query_server_entry(vd->lsock,
+ info->server);
+ }
+#ifdef CONFIG_VNC_WS
+ if (vd->lwebsock != -1) {
+ /* TODO */
+ }
+#endif
+
+ item = g_new0(VncInfo2List, 1);
+ item->value = info;
+ item->next = prev;
+ prev = item;
+ }
+ return prev;
+}
+
/* TODO
1) Get the queue working for IO.
2) there is some weirdness when using the -S option (the screen is grey
--
1.8.3.1
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [Qemu-devel] [PULL 10/10] monitor: add vnc websockets
2014-12-19 9:04 [Qemu-devel] [PULL 00/10] vnc: add support for multiple vnc displays Gerd Hoffmann
` (8 preceding siblings ...)
2014-12-19 9:04 ` [Qemu-devel] [PULL 09/10] monitor: add query-vnc2 command Gerd Hoffmann
@ 2014-12-19 9:04 ` Gerd Hoffmann
2014-12-19 13:06 ` Markus Armbruster
2014-12-19 18:09 ` Eric Blake
2014-12-19 12:51 ` [Qemu-devel] [PULL 00/10] vnc: add support for multiple vnc displays Markus Armbruster
10 siblings, 2 replies; 22+ messages in thread
From: Gerd Hoffmann @ 2014-12-19 9:04 UTC (permalink / raw)
To: qemu-devel
Cc: Markus Armbruster, Gerd Hoffmann, Anthony Liguori, Luiz Capitulino
Add websockets bool to VncBasicInfo, report websocket server sockets,
flag websocket client connections.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
qapi-schema.json | 5 ++++-
ui/vnc.c | 15 ++++++++++++---
2 files changed, 16 insertions(+), 4 deletions(-)
diff --git a/qapi-schema.json b/qapi-schema.json
index 2d45d4c..07deb71 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -672,12 +672,15 @@
#
# @family: address family
#
+# @websocket: true in case the socket is a websocket (since 2.3).
+#
# Since: 2.1
##
{ 'type': 'VncBasicInfo',
'data': { 'host': 'str',
'service': 'str',
- 'family': 'NetworkAddressFamily' } }
+ 'family': 'NetworkAddressFamily',
+ 'websocket': 'bool' } }
##
# @VncServerInfo
diff --git a/ui/vnc.c b/ui/vnc.c
index e730059..fb8068f 100644
--- a/ui/vnc.c
+++ b/ui/vnc.c
@@ -353,6 +353,9 @@ static VncClientInfo *qmp_query_vnc_client(const VncState *client)
info->base->host = g_strdup(host);
info->base->service = g_strdup(serv);
info->base->family = inet_netfamily(sa.ss_family);
+#ifdef CONFIG_VNC_WS
+ info->base->websocket = client->websocket;
+#endif
#ifdef CONFIG_VNC_TLS
if (client->tls.session && client->tls.dname) {
@@ -457,6 +460,7 @@ out_error:
}
static VncBasicInfoList *qmp_query_server_entry(int socket,
+ bool websocket,
VncBasicInfoList *prev)
{
VncBasicInfoList *list;
@@ -477,6 +481,7 @@ static VncBasicInfoList *qmp_query_server_entry(int socket,
info->host = g_strdup(host);
info->service = g_strdup(serv);
info->family = inet_netfamily(sa.ss_family);
+ info->websocket = websocket;
list = g_new0(VncBasicInfoList, 1);
list->value = info;
@@ -572,12 +577,13 @@ VncInfo2List *qmp_query_vnc2(Error **errp)
info->display = g_strdup(dev->id);
}
if (vd->lsock != -1) {
- info->server = qmp_query_server_entry(vd->lsock,
+ info->server = qmp_query_server_entry(vd->lsock, false,
info->server);
}
#ifdef CONFIG_VNC_WS
if (vd->lwebsock != -1) {
- /* TODO */
+ info->server = qmp_query_server_entry(vd->lwebsock, true,
+ info->server);
}
#endif
@@ -3304,10 +3310,13 @@ void vnc_display_open(const char *id, Error **errp)
{
VncDisplay *vs = vnc_display_find(id);
QemuOpts *opts = qemu_opts_find(&qemu_vnc_opts, id);
- const char *display, *websocket, *share, *device_id;
+ const char *display, *share, *device_id;
QemuConsole *con;
int password = 0;
int reverse = 0;
+#ifdef CONFIG_VNC_WS
+ const char *websocket;
+#endif
#ifdef CONFIG_VNC_TLS
int tls = 0, x509 = 0;
const char *path;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 22+ messages in thread
* Re: [Qemu-devel] [PULL 00/10] vnc: add support for multiple vnc displays
2014-12-19 9:04 [Qemu-devel] [PULL 00/10] vnc: add support for multiple vnc displays Gerd Hoffmann
` (9 preceding siblings ...)
2014-12-19 9:04 ` [Qemu-devel] [PULL 10/10] monitor: add vnc websockets Gerd Hoffmann
@ 2014-12-19 12:51 ` Markus Armbruster
10 siblings, 0 replies; 22+ messages in thread
From: Markus Armbruster @ 2014-12-19 12:51 UTC (permalink / raw)
To: Gerd Hoffmann; +Cc: qemu-devel
Gerd Hoffmann <kraxel@redhat.com> writes:
> Hi,
>
> Ok, here we go with the multiple vnc display patch series.
> Compared to the v3 series two patch hunks have been moved
> from patch #9 to patch #2. The final result after applying
> all patches hasn't changed, so I think it's ok to go straight
> for a pull req instead of sending a v4.
Hold your horses, I have review comments :)
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [Qemu-devel] [PULL 09/10] monitor: add query-vnc2 command
2014-12-19 9:04 ` [Qemu-devel] [PULL 09/10] monitor: add query-vnc2 command Gerd Hoffmann
@ 2014-12-19 13:04 ` Markus Armbruster
2014-12-19 18:05 ` Eric Blake
` (2 more replies)
0 siblings, 3 replies; 22+ messages in thread
From: Markus Armbruster @ 2014-12-19 13:04 UTC (permalink / raw)
To: Gerd Hoffmann; +Cc: qemu-devel, Anthony Liguori, Luiz Capitulino
Gerd Hoffmann <kraxel@redhat.com> writes:
> Add new query vnc qmp command, for the lack of better ideas just name it
> "query-vnc2". Changes over query-vnc:
>
> * It returns a list of vnc servers, so multiple vnc server instances
> are covered.
> * Each vnc server returns a list of server sockets. Followup patch
> will use that to also report websockets. In case we add support for
> multiple server sockets server sockets (to better support ipv4+ipv6
> dualstack) we can add them to the list too.
I guess we could shoehorn this into query-vnc by having it return an
anonymous union and use an optional parameter to select the alternative.
Too much trouble just to avoid an ugly name.
Call it query-vnc-servers?
> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
> ---
> qapi-schema.json | 68 ++++++++++++++++++++++++++++
> qmp-commands.hx | 5 +++
> ui/vnc.c | 133 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 206 insertions(+)
>
> diff --git a/qapi-schema.json b/qapi-schema.json
> index 563b4ad..2d45d4c 100644
> --- a/qapi-schema.json
> +++ b/qapi-schema.json
> @@ -751,6 +751,63 @@
> '*service': 'str', '*auth': 'str', '*clients': ['VncClientInfo']} }
>
> ##
> +# @VncPriAuth:
I don't personally mind abbreviations, but maybe somebody else does:
QAPI / QMP tends to spell things out, like VncPrimaryAuthentication.
Maybe just VncPrimaryAuth, since there's precedence for abbreviating
authentication that way.
> +#
> +# vnc primary authentication method.
> +#
> +# Since: 2.3
> +##
> +{ 'enum': 'VncPriAuth',
> + 'data': [ 'none', 'vnc', 'ra2', 'ra2ne', 'tight', 'ultra',
> + 'tls', 'vencrypt', 'sasl' ] }
> +
> +##
> +# @VncVencryptSubAuth:
> +#
> +# vnc sub authentication method with vencrypt.
> +#
> +# Since: 2.3
> +##
> +{ 'enum': 'VncVencryptSubAuth',
> + 'data': [ 'plain',
> + 'tls-none', 'x509-none',
> + 'tls-vnc', 'x509-vnc',
> + 'tls-plain', 'x509-plain',
> + 'tls-sasl', 'x509-sasl' ] }
> +
> +##
> +# @VncInfo2:
> +#
> +# Information about a vnc server
> +#
> +# @id: vnc server name.
> +#
> +# @server: A list of @VncBasincInfo describing all listening sockets.
> +# The list can be empty (in case the vnc server is disabled).
> +# It also may have multiple entries: normal + websocket,
> +# possibly also ipv4 + ipv6 in the future.
> +#
> +# @clients: A list of @VncClientInfo of all currently connected clients.
> +# The list can be empty, for obvious reasons.
> +#
> +# @auth: The current authentication type used by the server
> +#
> +# @vencrypt: #optional The vencrypt sub authentication type used by the server,
> +# only specified in case auth == vencrypt.
> +#
> +# @display: #optional The display device the vnc server is linked to.
> +#
> +# Since: 2.3
> +##
> +{ 'type': 'VncInfo2',
> + 'data': { 'id' : 'str',
> + 'server' : ['VncBasicInfo'],
> + 'clients' : ['VncClientInfo'],
> + 'auth' : 'VncPriAuth',
> + '*vencrypt' : 'VncVencryptSubAuth',
> + '*display' : 'str' } }
> +
> +##
> # @query-vnc:
> #
> # Returns information about the current VNC server
> @@ -762,6 +819,17 @@
> { 'command': 'query-vnc', 'returns': 'VncInfo' }
>
> ##
> +# @query-vnc2:
> +#
> +# Returns a list of vnc servers. The list can be empty.
> +#
> +# Returns: @VncInfo
Returns: a list of @VncInfo2
> +#
> +# Since: 2.3
> +##
> +{ 'command': 'query-vnc2', 'returns': ['VncInfo2'] }
> +
> +##
> # @SpiceBasicInfo
> #
> # The basic information for SPICE network connection
Schema looks good to me otherwise, but I'd like to hear Eric's opinion.
> diff --git a/qmp-commands.hx b/qmp-commands.hx
> index 3348782..dec288a 100644
> --- a/qmp-commands.hx
> +++ b/qmp-commands.hx
> @@ -2825,6 +2825,11 @@ EQMP
> .args_type = "",
> .mhandler.cmd_new = qmp_marshal_input_query_vnc,
> },
> + {
> + .name = "query-vnc2",
> + .args_type = "",
> + .mhandler.cmd_new = qmp_marshal_input_query_vnc2,
> + },
>
> SQMP
> query-spice
> diff --git a/ui/vnc.c b/ui/vnc.c
> index d7c7865..e730059 100644
> --- a/ui/vnc.c
> +++ b/ui/vnc.c
> @@ -456,6 +456,139 @@ out_error:
> return NULL;
> }
>
> +static VncBasicInfoList *qmp_query_server_entry(int socket,
> + VncBasicInfoList *prev)
> +{
> + VncBasicInfoList *list;
> + VncBasicInfo *info;
> + struct sockaddr_storage sa;
> + socklen_t salen = sizeof(sa);
> + char host[NI_MAXHOST];
> + char serv[NI_MAXSERV];
> +
> + if (getsockname(socket, (struct sockaddr *)&sa, &salen) < 0 ||
> + getnameinfo((struct sockaddr *)&sa, salen,
> + host, sizeof(host), serv, sizeof(serv),
> + NI_NUMERICHOST | NI_NUMERICSERV) < 0) {
> + return prev;
> + }
> +
> + info = g_new0(VncBasicInfo, 1);
> + info->host = g_strdup(host);
> + info->service = g_strdup(serv);
> + info->family = inet_netfamily(sa.ss_family);
> +
> + list = g_new0(VncBasicInfoList, 1);
> + list->value = info;
> + list->next = prev;
> + return list;
> +}
> +
> +static void qmp_query_auth(VncDisplay *vd, VncInfo2 *info)
> +{
> + switch (vd->auth) {
> + case VNC_AUTH_VNC:
> + info->auth = VNC_PRI_AUTH_VNC;
> + break;
> + case VNC_AUTH_RA2:
> + info->auth = VNC_PRI_AUTH_RA2;
> + break;
> + case VNC_AUTH_RA2NE:
> + info->auth = VNC_PRI_AUTH_RA2NE;
> + break;
> + case VNC_AUTH_TIGHT:
> + info->auth = VNC_PRI_AUTH_TIGHT;
> + break;
> + case VNC_AUTH_ULTRA:
> + info->auth = VNC_PRI_AUTH_ULTRA;
> + break;
> + case VNC_AUTH_TLS:
> + info->auth = VNC_PRI_AUTH_TLS;
> + break;
> + case VNC_AUTH_VENCRYPT:
> + info->auth = VNC_PRI_AUTH_VENCRYPT;
> +#ifdef CONFIG_VNC_TLS
> + info->has_vencrypt = true;
> + switch (vd->subauth) {
> + case VNC_AUTH_VENCRYPT_PLAIN:
> + info->vencrypt = VNC_VENCRYPT_SUB_AUTH_PLAIN;
> + break;
> + case VNC_AUTH_VENCRYPT_TLSNONE:
> + info->vencrypt = VNC_VENCRYPT_SUB_AUTH_TLS_NONE;
> + break;
> + case VNC_AUTH_VENCRYPT_TLSVNC:
> + info->vencrypt = VNC_VENCRYPT_SUB_AUTH_TLS_VNC;
> + break;
> + case VNC_AUTH_VENCRYPT_TLSPLAIN:
> + info->vencrypt = VNC_VENCRYPT_SUB_AUTH_TLS_PLAIN;
> + break;
> + case VNC_AUTH_VENCRYPT_X509NONE:
> + info->vencrypt = VNC_VENCRYPT_SUB_AUTH_X509_NONE;
> + break;
> + case VNC_AUTH_VENCRYPT_X509VNC:
> + info->vencrypt = VNC_VENCRYPT_SUB_AUTH_X509_VNC;
> + break;
> + case VNC_AUTH_VENCRYPT_X509PLAIN:
> + info->vencrypt = VNC_VENCRYPT_SUB_AUTH_X509_PLAIN;
> + break;
> + case VNC_AUTH_VENCRYPT_TLSSASL:
> + info->vencrypt = VNC_VENCRYPT_SUB_AUTH_TLS_SASL;
> + break;
> + case VNC_AUTH_VENCRYPT_X509SASL:
> + info->vencrypt = VNC_VENCRYPT_SUB_AUTH_X509_SASL;
> + break;
> + default:
> + info->has_vencrypt = false;
> + break;
> + }
> +#endif
> + break;
> + case VNC_AUTH_SASL:
> + info->auth = VNC_PRI_AUTH_SASL;
> + break;
> + case VNC_AUTH_NONE:
> + default:
> + info->auth = VNC_PRI_AUTH_NONE;
> + break;
> + }
T-e-d-i-o-u-s :)
What about mapping vnc.h's authenticaton modes to the QAPI enumeration
constants with tables rather than switches? Your choice.
If the schema let us specify the enumeration values, we could avoid the
mapping altogether.
> +}
> +
> +VncInfo2List *qmp_query_vnc2(Error **errp)
> +{
> + VncInfo2List *item, *prev = NULL;
> + VncInfo2 *info;
> + VncDisplay *vd;
> + DeviceState *dev;
> +
> + QTAILQ_FOREACH(vd, &vnc_displays, next) {
> + info = g_new0(VncInfo2, 1);
> + info->id = g_strdup(vd->id);
> + info->clients = qmp_query_client_list(vd);
> + qmp_query_auth(vd, info);
> + if (vd->dcl.con) {
> + dev = DEVICE(object_property_get_link(OBJECT(vd->dcl.con),
> + "device", NULL));
> + info->has_display = true;
> + info->display = g_strdup(dev->id);
> + }
> + if (vd->lsock != -1) {
> + info->server = qmp_query_server_entry(vd->lsock,
> + info->server);
> + }
> +#ifdef CONFIG_VNC_WS
> + if (vd->lwebsock != -1) {
> + /* TODO */
> + }
> +#endif
> +
> + item = g_new0(VncInfo2List, 1);
> + item->value = info;
> + item->next = prev;
> + prev = item;
> + }
> + return prev;
> +}
> +
> /* TODO
> 1) Get the queue working for IO.
> 2) there is some weirdness when using the -S option (the screen is grey
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [Qemu-devel] [PULL 10/10] monitor: add vnc websockets
2014-12-19 9:04 ` [Qemu-devel] [PULL 10/10] monitor: add vnc websockets Gerd Hoffmann
@ 2014-12-19 13:06 ` Markus Armbruster
2014-12-19 18:09 ` Eric Blake
1 sibling, 0 replies; 22+ messages in thread
From: Markus Armbruster @ 2014-12-19 13:06 UTC (permalink / raw)
To: Gerd Hoffmann; +Cc: qemu-devel, Anthony Liguori, Luiz Capitulino
Copying Eric again, even though the QAPI schema change here is pretty
trivial.
Gerd Hoffmann <kraxel@redhat.com> writes:
> Add websockets bool to VncBasicInfo, report websocket server sockets,
> flag websocket client connections.
>
> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
> ---
> qapi-schema.json | 5 ++++-
> ui/vnc.c | 15 ++++++++++++---
> 2 files changed, 16 insertions(+), 4 deletions(-)
>
> diff --git a/qapi-schema.json b/qapi-schema.json
> index 2d45d4c..07deb71 100644
> --- a/qapi-schema.json
> +++ b/qapi-schema.json
> @@ -672,12 +672,15 @@
> #
> # @family: address family
> #
> +# @websocket: true in case the socket is a websocket (since 2.3).
> +#
> # Since: 2.1
> ##
> { 'type': 'VncBasicInfo',
> 'data': { 'host': 'str',
> 'service': 'str',
> - 'family': 'NetworkAddressFamily' } }
> + 'family': 'NetworkAddressFamily',
> + 'websocket': 'bool' } }
>
> ##
> # @VncServerInfo
> diff --git a/ui/vnc.c b/ui/vnc.c
> index e730059..fb8068f 100644
> --- a/ui/vnc.c
> +++ b/ui/vnc.c
> @@ -353,6 +353,9 @@ static VncClientInfo *qmp_query_vnc_client(const VncState *client)
> info->base->host = g_strdup(host);
> info->base->service = g_strdup(serv);
> info->base->family = inet_netfamily(sa.ss_family);
> +#ifdef CONFIG_VNC_WS
> + info->base->websocket = client->websocket;
> +#endif
>
> #ifdef CONFIG_VNC_TLS
> if (client->tls.session && client->tls.dname) {
> @@ -457,6 +460,7 @@ out_error:
> }
>
> static VncBasicInfoList *qmp_query_server_entry(int socket,
> + bool websocket,
> VncBasicInfoList *prev)
> {
> VncBasicInfoList *list;
> @@ -477,6 +481,7 @@ static VncBasicInfoList *qmp_query_server_entry(int socket,
> info->host = g_strdup(host);
> info->service = g_strdup(serv);
> info->family = inet_netfamily(sa.ss_family);
> + info->websocket = websocket;
>
> list = g_new0(VncBasicInfoList, 1);
> list->value = info;
> @@ -572,12 +577,13 @@ VncInfo2List *qmp_query_vnc2(Error **errp)
> info->display = g_strdup(dev->id);
> }
> if (vd->lsock != -1) {
> - info->server = qmp_query_server_entry(vd->lsock,
> + info->server = qmp_query_server_entry(vd->lsock, false,
> info->server);
> }
> #ifdef CONFIG_VNC_WS
> if (vd->lwebsock != -1) {
> - /* TODO */
> + info->server = qmp_query_server_entry(vd->lwebsock, true,
> + info->server);
> }
> #endif
>
> @@ -3304,10 +3310,13 @@ void vnc_display_open(const char *id, Error **errp)
> {
> VncDisplay *vs = vnc_display_find(id);
> QemuOpts *opts = qemu_opts_find(&qemu_vnc_opts, id);
> - const char *display, *websocket, *share, *device_id;
> + const char *display, *share, *device_id;
> QemuConsole *con;
> int password = 0;
> int reverse = 0;
> +#ifdef CONFIG_VNC_WS
> + const char *websocket;
> +#endif
> #ifdef CONFIG_VNC_TLS
> int tls = 0, x509 = 0;
> const char *path;
Reviewed-by: Markus Armbruster <armbru@redhat.com>
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [Qemu-devel] [PULL 09/10] monitor: add query-vnc2 command
2014-12-19 13:04 ` Markus Armbruster
@ 2014-12-19 18:05 ` Eric Blake
2015-01-06 10:39 ` Gerd Hoffmann
2015-01-06 10:36 ` Gerd Hoffmann
2015-01-08 15:44 ` Gerd Hoffmann
2 siblings, 1 reply; 22+ messages in thread
From: Eric Blake @ 2014-12-19 18:05 UTC (permalink / raw)
To: Markus Armbruster, Gerd Hoffmann
Cc: qemu-devel, Anthony Liguori, Luiz Capitulino
On 12/19/2014 06:04 AM, Markus Armbruster wrote:
> Gerd Hoffmann <kraxel@redhat.com> writes:
>
>> Add new query vnc qmp command, for the lack of better ideas just name it
>> "query-vnc2". Changes over query-vnc:
>>
>> * It returns a list of vnc servers, so multiple vnc server instances
>> are covered.
>> * Each vnc server returns a list of server sockets. Followup patch
>> will use that to also report websockets. In case we add support for
>> multiple server sockets server sockets (to better support ipv4+ipv6
>> dualstack) we can add them to the list too.
>
> I guess we could shoehorn this into query-vnc by having it return an
> anonymous union and use an optional parameter to select the alternative.
> Too much trouble just to avoid an ugly name.
>
> Call it query-vnc-servers?
Might be a nicer name, indeed.
>> ##
>> +# @VncPriAuth:
>
> I don't personally mind abbreviations, but maybe somebody else does:
> QAPI / QMP tends to spell things out, like VncPrimaryAuthentication.
> Maybe just VncPrimaryAuth, since there's precedence for abbreviating
> authentication that way.
"A rose by any other name would smell as sweet". But I'm okay with
VncPrimaryAuth.
>
> Schema looks good to me otherwise, but I'd like to hear Eric's opinion.
Yes, other than documentation/naming nits, the schema looks fine.
>
> If the schema let us specify the enumeration values, we could avoid the
> mapping altogether.
Ooh, cool thought: what if we allowed:
{ 'enum': 'Foo', 'data': [
{ 'name': 'One', 'value': 1 },
{ 'name': 'Two', 'value': 2 } ] }
as a way to force 1 and 2 (rather than the default of first string in
the list getting 0)? Would we allow aliases, or if you specify a value,
must all names be unique? Would it be C-like semantics where you can
mix and match name-only shorthand with name/values, and where name-only
entries default to one greater than the previous value, starting at 0?
But that's in the same category as future patches that would let us
specify default values - that is, someone has to do the work to add the
extension and enhance the testsuite/documentation to cover it.
--
Eric Blake eblake redhat com +1-919-301-3266
Libvirt virtualization library http://libvirt.org
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [Qemu-devel] [PULL 10/10] monitor: add vnc websockets
2014-12-19 9:04 ` [Qemu-devel] [PULL 10/10] monitor: add vnc websockets Gerd Hoffmann
2014-12-19 13:06 ` Markus Armbruster
@ 2014-12-19 18:09 ` Eric Blake
1 sibling, 0 replies; 22+ messages in thread
From: Eric Blake @ 2014-12-19 18:09 UTC (permalink / raw)
To: Gerd Hoffmann, qemu-devel
Cc: Markus Armbruster, Anthony Liguori, Luiz Capitulino
On 12/19/2014 02:04 AM, Gerd Hoffmann wrote:
> Add websockets bool to VncBasicInfo, report websocket server sockets,
> flag websocket client connections.
>
> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
> ---
> qapi-schema.json | 5 ++++-
> ui/vnc.c | 15 ++++++++++++---
> 2 files changed, 16 insertions(+), 4 deletions(-)
>
> diff --git a/qapi-schema.json b/qapi-schema.json
> index 2d45d4c..07deb71 100644
> --- a/qapi-schema.json
> +++ b/qapi-schema.json
> @@ -672,12 +672,15 @@
> #
> # @family: address family
> #
> +# @websocket: true in case the socket is a websocket (since 2.3).
> +#
> # Since: 2.1
> ##
> { 'type': 'VncBasicInfo',
> 'data': { 'host': 'str',
> 'service': 'str',
> - 'family': 'NetworkAddressFamily' } }
> + 'family': 'NetworkAddressFamily',
> + 'websocket': 'bool' } }
This says the field is mandatory;
> +++ b/ui/vnc.c
> @@ -353,6 +353,9 @@ static VncClientInfo *qmp_query_vnc_client(const VncState *client)
> info->base->host = g_strdup(host);
> info->base->service = g_strdup(serv);
> info->base->family = inet_netfamily(sa.ss_family);
> +#ifdef CONFIG_VNC_WS
> + info->base->websocket = client->websocket;
> +#endif
while this only conditionally assigns it. Fortunately, in the context
not shown here, you use g_malloc0 for initializing info->base, so it
works out.
Reviewed-by: Eric Blake <eblake@redhat.com>
--
Eric Blake eblake redhat com +1-919-301-3266
Libvirt virtualization library http://libvirt.org
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [Qemu-devel] [PULL 09/10] monitor: add query-vnc2 command
2014-12-19 13:04 ` Markus Armbruster
2014-12-19 18:05 ` Eric Blake
@ 2015-01-06 10:36 ` Gerd Hoffmann
2015-01-08 15:44 ` Gerd Hoffmann
2 siblings, 0 replies; 22+ messages in thread
From: Gerd Hoffmann @ 2015-01-06 10:36 UTC (permalink / raw)
To: Markus Armbruster; +Cc: qemu-devel, Anthony Liguori, Luiz Capitulino
> > Add new query vnc qmp command, for the lack of better ideas just name it
> > "query-vnc2". Changes over query-vnc:
> Call it query-vnc-servers?
Fine with me, done.
> Maybe just VncPrimaryAuth, since there's precedence for abbreviating
> authentication that way.
Done.
> > ##
> > +# @query-vnc2:
> > +#
> > +# Returns a list of vnc servers. The list can be empty.
> > +#
> > +# Returns: @VncInfo
>
> Returns: a list of @VncInfo2
Yep.
While being at it and as we've dropped the '2' from the command name:
Suggestions for a better struct name?
Note there already is a VncServerInfo struct, so going for something
like VncServersInfo looks like a bad idea ...
> > + case VNC_AUTH_SASL:
> > + info->auth = VNC_PRI_AUTH_SASL;
> > + break;
> > + case VNC_AUTH_NONE:
> > + default:
> > + info->auth = VNC_PRI_AUTH_NONE;
> > + break;
> > + }
>
> T-e-d-i-o-u-s :)
>
> What about mapping vnc.h's authenticaton modes to the QAPI enumeration
> constants with tables rather than switches? Your choice.
Did it this way due to the numbers being sparse.
cheers,
Gerd
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [Qemu-devel] [PULL 09/10] monitor: add query-vnc2 command
2014-12-19 18:05 ` Eric Blake
@ 2015-01-06 10:39 ` Gerd Hoffmann
2015-01-12 15:53 ` Markus Armbruster
0 siblings, 1 reply; 22+ messages in thread
From: Gerd Hoffmann @ 2015-01-06 10:39 UTC (permalink / raw)
To: Eric Blake
Cc: Luiz Capitulino, Markus Armbruster, Anthony Liguori, qemu-devel
Hi,
> > If the schema let us specify the enumeration values, we could avoid the
> > mapping altogether.
>
> Ooh, cool thought: what if we allowed:
>
> { 'enum': 'Foo', 'data': [
> { 'name': 'One', 'value': 1 },
> { 'name': 'Two', 'value': 2 } ] }
Looks nice. Where is the patch?
cheers,
Gerd
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [Qemu-devel] [PULL 09/10] monitor: add query-vnc2 command
2014-12-19 13:04 ` Markus Armbruster
2014-12-19 18:05 ` Eric Blake
2015-01-06 10:36 ` Gerd Hoffmann
@ 2015-01-08 15:44 ` Gerd Hoffmann
2 siblings, 0 replies; 22+ messages in thread
From: Gerd Hoffmann @ 2015-01-08 15:44 UTC (permalink / raw)
To: Markus Armbruster; +Cc: qemu-devel, Anthony Liguori, Luiz Capitulino
[-- Attachment #1: Type: text/plain, Size: 874 bytes --]
On Fr, 2014-12-19 at 14:04 +0100, Markus Armbruster wrote:
> Gerd Hoffmann <kraxel@redhat.com> writes:
>
> > Add new query vnc qmp command, for the lack of better ideas just name it
> > "query-vnc2". Changes over query-vnc:
> >
> > * It returns a list of vnc servers, so multiple vnc server instances
> > are covered.
> > * Each vnc server returns a list of server sockets. Followup patch
> > will use that to also report websockets. In case we add support for
> > multiple server sockets server sockets (to better support ipv4+ipv6
> > dualstack) we can add them to the list too.
>
> I guess we could shoehorn this into query-vnc by having it return an
> anonymous union and use an optional parameter to select the alternative.
> Too much trouble just to avoid an ugly name.
>
> Call it query-vnc-servers?
New patch revision attached.
cheers,
Gerd
[-- Attachment #2: 0001-monitor-add-query-vnc2-command.patch --]
[-- Type: text/x-patch, Size: 7984 bytes --]
>From 283e11d9e0659d3009aa3fb999b7fd814e958845 Mon Sep 17 00:00:00 2001
From: Gerd Hoffmann <kraxel@redhat.com>
Date: Wed, 17 Dec 2014 15:49:44 +0100
Subject: [PATCH] monitor: add query-vnc2 command
Add new query vnc qmp command, for the lack of better ideas just name it
"query-vnc2". Changes over query-vnc:
* It returns a list of vnc servers, so multiple vnc server instances
are covered.
* Each vnc server returns a list of server sockets. Followup patch
will use that to also report websockets. In case we add support for
multiple server sockets server sockets (to better support ipv4+ipv6
dualstack) we can add them to the list too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
qapi-schema.json | 68 ++++++++++++++++++++++++++++
qmp-commands.hx | 5 +++
ui/vnc.c | 133 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 206 insertions(+)
diff --git a/qapi-schema.json b/qapi-schema.json
index 563b4ad..8291f6b 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -751,6 +751,63 @@
'*service': 'str', '*auth': 'str', '*clients': ['VncClientInfo']} }
##
+# @VncPriAuth:
+#
+# vnc primary authentication method.
+#
+# Since: 2.3
+##
+{ 'enum': 'VncPrimaryAuth',
+ 'data': [ 'none', 'vnc', 'ra2', 'ra2ne', 'tight', 'ultra',
+ 'tls', 'vencrypt', 'sasl' ] }
+
+##
+# @VncVencryptSubAuth:
+#
+# vnc sub authentication method with vencrypt.
+#
+# Since: 2.3
+##
+{ 'enum': 'VncVencryptSubAuth',
+ 'data': [ 'plain',
+ 'tls-none', 'x509-none',
+ 'tls-vnc', 'x509-vnc',
+ 'tls-plain', 'x509-plain',
+ 'tls-sasl', 'x509-sasl' ] }
+
+##
+# @VncInfo2:
+#
+# Information about a vnc server
+#
+# @id: vnc server name.
+#
+# @server: A list of @VncBasincInfo describing all listening sockets.
+# The list can be empty (in case the vnc server is disabled).
+# It also may have multiple entries: normal + websocket,
+# possibly also ipv4 + ipv6 in the future.
+#
+# @clients: A list of @VncClientInfo of all currently connected clients.
+# The list can be empty, for obvious reasons.
+#
+# @auth: The current authentication type used by the server
+#
+# @vencrypt: #optional The vencrypt sub authentication type used by the server,
+# only specified in case auth == vencrypt.
+#
+# @display: #optional The display device the vnc server is linked to.
+#
+# Since: 2.3
+##
+{ 'type': 'VncInfo2',
+ 'data': { 'id' : 'str',
+ 'server' : ['VncBasicInfo'],
+ 'clients' : ['VncClientInfo'],
+ 'auth' : 'VncPrimaryAuth',
+ '*vencrypt' : 'VncVencryptSubAuth',
+ '*display' : 'str' } }
+
+##
# @query-vnc:
#
# Returns information about the current VNC server
@@ -762,6 +819,17 @@
{ 'command': 'query-vnc', 'returns': 'VncInfo' }
##
+# @query-vnc-servers:
+#
+# Returns a list of vnc servers. The list can be empty.
+#
+# Returns: a list of @VncInfo2
+#
+# Since: 2.3
+##
+{ 'command': 'query-vnc-servers', 'returns': ['VncInfo2'] }
+
+##
# @SpiceBasicInfo
#
# The basic information for SPICE network connection
diff --git a/qmp-commands.hx b/qmp-commands.hx
index 6945d30..00c004b 100644
--- a/qmp-commands.hx
+++ b/qmp-commands.hx
@@ -2825,6 +2825,11 @@ EQMP
.args_type = "",
.mhandler.cmd_new = qmp_marshal_input_query_vnc,
},
+ {
+ .name = "query-vnc-servers",
+ .args_type = "",
+ .mhandler.cmd_new = qmp_marshal_input_query_vnc_servers,
+ },
SQMP
query-spice
diff --git a/ui/vnc.c b/ui/vnc.c
index d7c7865..f5dd92b 100644
--- a/ui/vnc.c
+++ b/ui/vnc.c
@@ -456,6 +456,139 @@ out_error:
return NULL;
}
+static VncBasicInfoList *qmp_query_server_entry(int socket,
+ VncBasicInfoList *prev)
+{
+ VncBasicInfoList *list;
+ VncBasicInfo *info;
+ struct sockaddr_storage sa;
+ socklen_t salen = sizeof(sa);
+ char host[NI_MAXHOST];
+ char serv[NI_MAXSERV];
+
+ if (getsockname(socket, (struct sockaddr *)&sa, &salen) < 0 ||
+ getnameinfo((struct sockaddr *)&sa, salen,
+ host, sizeof(host), serv, sizeof(serv),
+ NI_NUMERICHOST | NI_NUMERICSERV) < 0) {
+ return prev;
+ }
+
+ info = g_new0(VncBasicInfo, 1);
+ info->host = g_strdup(host);
+ info->service = g_strdup(serv);
+ info->family = inet_netfamily(sa.ss_family);
+
+ list = g_new0(VncBasicInfoList, 1);
+ list->value = info;
+ list->next = prev;
+ return list;
+}
+
+static void qmp_query_auth(VncDisplay *vd, VncInfo2 *info)
+{
+ switch (vd->auth) {
+ case VNC_AUTH_VNC:
+ info->auth = VNC_PRIMARY_AUTH_VNC;
+ break;
+ case VNC_AUTH_RA2:
+ info->auth = VNC_PRIMARY_AUTH_RA2;
+ break;
+ case VNC_AUTH_RA2NE:
+ info->auth = VNC_PRIMARY_AUTH_RA2NE;
+ break;
+ case VNC_AUTH_TIGHT:
+ info->auth = VNC_PRIMARY_AUTH_TIGHT;
+ break;
+ case VNC_AUTH_ULTRA:
+ info->auth = VNC_PRIMARY_AUTH_ULTRA;
+ break;
+ case VNC_AUTH_TLS:
+ info->auth = VNC_PRIMARY_AUTH_TLS;
+ break;
+ case VNC_AUTH_VENCRYPT:
+ info->auth = VNC_PRIMARY_AUTH_VENCRYPT;
+#ifdef CONFIG_VNC_TLS
+ info->has_vencrypt = true;
+ switch (vd->subauth) {
+ case VNC_AUTH_VENCRYPT_PLAIN:
+ info->vencrypt = VNC_VENCRYPT_SUB_AUTH_PLAIN;
+ break;
+ case VNC_AUTH_VENCRYPT_TLSNONE:
+ info->vencrypt = VNC_VENCRYPT_SUB_AUTH_TLS_NONE;
+ break;
+ case VNC_AUTH_VENCRYPT_TLSVNC:
+ info->vencrypt = VNC_VENCRYPT_SUB_AUTH_TLS_VNC;
+ break;
+ case VNC_AUTH_VENCRYPT_TLSPLAIN:
+ info->vencrypt = VNC_VENCRYPT_SUB_AUTH_TLS_PLAIN;
+ break;
+ case VNC_AUTH_VENCRYPT_X509NONE:
+ info->vencrypt = VNC_VENCRYPT_SUB_AUTH_X509_NONE;
+ break;
+ case VNC_AUTH_VENCRYPT_X509VNC:
+ info->vencrypt = VNC_VENCRYPT_SUB_AUTH_X509_VNC;
+ break;
+ case VNC_AUTH_VENCRYPT_X509PLAIN:
+ info->vencrypt = VNC_VENCRYPT_SUB_AUTH_X509_PLAIN;
+ break;
+ case VNC_AUTH_VENCRYPT_TLSSASL:
+ info->vencrypt = VNC_VENCRYPT_SUB_AUTH_TLS_SASL;
+ break;
+ case VNC_AUTH_VENCRYPT_X509SASL:
+ info->vencrypt = VNC_VENCRYPT_SUB_AUTH_X509_SASL;
+ break;
+ default:
+ info->has_vencrypt = false;
+ break;
+ }
+#endif
+ break;
+ case VNC_AUTH_SASL:
+ info->auth = VNC_PRIMARY_AUTH_SASL;
+ break;
+ case VNC_AUTH_NONE:
+ default:
+ info->auth = VNC_PRIMARY_AUTH_NONE;
+ break;
+ }
+}
+
+VncInfo2List *qmp_query_vnc_servers(Error **errp)
+{
+ VncInfo2List *item, *prev = NULL;
+ VncInfo2 *info;
+ VncDisplay *vd;
+ DeviceState *dev;
+
+ QTAILQ_FOREACH(vd, &vnc_displays, next) {
+ info = g_new0(VncInfo2, 1);
+ info->id = g_strdup(vd->id);
+ info->clients = qmp_query_client_list(vd);
+ qmp_query_auth(vd, info);
+ if (vd->dcl.con) {
+ dev = DEVICE(object_property_get_link(OBJECT(vd->dcl.con),
+ "device", NULL));
+ info->has_display = true;
+ info->display = g_strdup(dev->id);
+ }
+ if (vd->lsock != -1) {
+ info->server = qmp_query_server_entry(vd->lsock,
+ info->server);
+ }
+#ifdef CONFIG_VNC_WS
+ if (vd->lwebsock != -1) {
+ /* TODO */
+ }
+#endif
+
+ item = g_new0(VncInfo2List, 1);
+ item->value = info;
+ item->next = prev;
+ prev = item;
+ }
+ return prev;
+}
+
/* TODO
1) Get the queue working for IO.
2) there is some weirdness when using the -S option (the screen is grey
--
1.8.3.1
^ permalink raw reply related [flat|nested] 22+ messages in thread
* Re: [Qemu-devel] [PULL 09/10] monitor: add query-vnc2 command
2015-01-06 10:39 ` Gerd Hoffmann
@ 2015-01-12 15:53 ` Markus Armbruster
0 siblings, 0 replies; 22+ messages in thread
From: Markus Armbruster @ 2015-01-12 15:53 UTC (permalink / raw)
To: Gerd Hoffmann; +Cc: qemu-devel, Anthony Liguori, Luiz Capitulino
Gerd Hoffmann <kraxel@redhat.com> writes:
> Hi,
>
>> > If the schema let us specify the enumeration values, we could avoid the
>> > mapping altogether.
>>
>> Ooh, cool thought: what if we allowed:
>>
>> { 'enum': 'Foo', 'data': [
>> { 'name': 'One', 'value': 1 },
>> { 'name': 'Two', 'value': 2 } ] }
>
> Looks nice. Where is the patch?
In Eric's List of Wonderful Things to do as Time Permits, somewhere
behind the respin of the lovely "[PATCH v4 00/19] drop qapi nested
structs" series ;-P
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [Qemu-devel] [PULL 00/10] vnc: add support for multiple vnc displays
2015-01-22 11:03 Gerd Hoffmann
@ 2015-01-22 13:55 ` Peter Maydell
0 siblings, 0 replies; 22+ messages in thread
From: Peter Maydell @ 2015-01-22 13:55 UTC (permalink / raw)
To: Gerd Hoffmann; +Cc: QEMU Developers
On 22 January 2015 at 11:03, Gerd Hoffmann <kraxel@redhat.com> wrote:
> Hi,
>
> No changes, no objections since posting ten days ago.
> Time for the pull req ;)
>
> please pull,
> Gerd
>
> The following changes since commit 699eae17b841e6784dc3864bf357e26bff1e9dfe:
>
> Merge remote-tracking branch 'remotes/pmaydell/tags/pull-misc-20150120' into staging (2015-01-20 16:19:58 +0000)
>
> are available in the git repository at:
>
>
> git://git.kraxel.org/qemu tags/pull-vnc-20150122-1
>
> for you to fetch changes up to 4478aa768ccefcc5b234c23d035435fd71b932f6:
>
> monitor: add vnc websockets (2015-01-22 11:18:47 +0100)
>
> ----------------------------------------------------------------
> vnc: add support for multiple vnc displays
>
> ----------------------------------------------------------------
Applied, thanks.
-- PMM
^ permalink raw reply [flat|nested] 22+ messages in thread
* [Qemu-devel] [PULL 00/10] vnc: add support for multiple vnc displays
@ 2015-01-22 11:03 Gerd Hoffmann
2015-01-22 13:55 ` Peter Maydell
0 siblings, 1 reply; 22+ messages in thread
From: Gerd Hoffmann @ 2015-01-22 11:03 UTC (permalink / raw)
To: qemu-devel; +Cc: Gerd Hoffmann
Hi,
No changes, no objections since posting ten days ago.
Time for the pull req ;)
please pull,
Gerd
The following changes since commit 699eae17b841e6784dc3864bf357e26bff1e9dfe:
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-misc-20150120' into staging (2015-01-20 16:19:58 +0000)
are available in the git repository at:
git://git.kraxel.org/qemu tags/pull-vnc-20150122-1
for you to fetch changes up to 4478aa768ccefcc5b234c23d035435fd71b932f6:
monitor: add vnc websockets (2015-01-22 11:18:47 +0100)
----------------------------------------------------------------
vnc: add support for multiple vnc displays
----------------------------------------------------------------
Gerd Hoffmann (10):
vnc: remove vnc_display global
vnc: remove unused DisplayState parameter, add id instead.
vnc: add display id to acl names
vnc: switch to QemuOpts, allow multiple servers
vnc: allow binding servers to qemu consoles
vnc: update docs/multiseat.txt
vnc: track & limit connections
vnc: factor out qmp_query_client_list
monitor: add query-vnc-servers command
monitor: add vnc websockets
docs/multiseat.txt | 18 +-
include/ui/console.h | 18 +-
qapi-schema.json | 73 +++++-
qmp-commands.hx | 5 +
qmp.c | 15 +-
ui/vnc.c | 634 ++++++++++++++++++++++++++++++++++++++-------------
ui/vnc.h | 5 +
vl.c | 41 ++--
8 files changed, 611 insertions(+), 198 deletions(-)
^ permalink raw reply [flat|nested] 22+ messages in thread
end of thread, other threads:[~2015-01-22 13:56 UTC | newest]
Thread overview: 22+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-12-19 9:04 [Qemu-devel] [PULL 00/10] vnc: add support for multiple vnc displays Gerd Hoffmann
2014-12-19 9:04 ` [Qemu-devel] [PULL 01/10] vnc: remove vnc_display global Gerd Hoffmann
2014-12-19 9:04 ` [Qemu-devel] [PULL 02/10] vnc: remove unused DisplayState parameter, add id instead Gerd Hoffmann
2014-12-19 9:04 ` [Qemu-devel] [PULL 03/10] vnc: add display id to acl names Gerd Hoffmann
2014-12-19 9:04 ` [Qemu-devel] [PULL 04/10] vnc: switch to QemuOpts, allow multiple servers Gerd Hoffmann
2014-12-19 9:04 ` [Qemu-devel] [PULL 05/10] vnc: allow binding servers to qemu consoles Gerd Hoffmann
2014-12-19 9:04 ` [Qemu-devel] [PULL 06/10] vnc: update docs/multiseat.txt Gerd Hoffmann
2014-12-19 9:04 ` [Qemu-devel] [PULL 07/10] vnc: track & limit connections Gerd Hoffmann
2014-12-19 9:04 ` [Qemu-devel] [PULL 08/10] vnc: factor out qmp_query_client_list Gerd Hoffmann
2014-12-19 9:04 ` [Qemu-devel] [PULL 09/10] monitor: add query-vnc2 command Gerd Hoffmann
2014-12-19 13:04 ` Markus Armbruster
2014-12-19 18:05 ` Eric Blake
2015-01-06 10:39 ` Gerd Hoffmann
2015-01-12 15:53 ` Markus Armbruster
2015-01-06 10:36 ` Gerd Hoffmann
2015-01-08 15:44 ` Gerd Hoffmann
2014-12-19 9:04 ` [Qemu-devel] [PULL 10/10] monitor: add vnc websockets Gerd Hoffmann
2014-12-19 13:06 ` Markus Armbruster
2014-12-19 18:09 ` Eric Blake
2014-12-19 12:51 ` [Qemu-devel] [PULL 00/10] vnc: add support for multiple vnc displays Markus Armbruster
2015-01-22 11:03 Gerd Hoffmann
2015-01-22 13:55 ` Peter Maydell
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.