[V2] ath10k-firmware: QCA9888 hw2.0: add GL.iNet GL-B2200 specific board file

[V2] ath10k-firmware: QCA9888 hw2.0: add GL.iNet GL-B2200 specific board file

[Enrico Mioso]

[-- Attachment #1: Type: text/plain, Size: 1054 bytes --]

Hello all!!

I would like to add a board file for the PCI-E Wi-Fi interface present on the GL.iNet GL-B2200 mesh router, a device added a while ago to OpenWRt.

* Hardware description:

This device seems based on IPQ4019 / AP-DK04.1-C3.
Three radios are used:
- one QCA4019 radio is used for 2.4 GHZ operation (submitted on a previous message)
- one QCA4019 radio is used for 5 GHZ for operating on lower part of 5 GHZ spectrum (submitted on a previous message)
- a QCA9888V2 interface connected over PCI-E to operate on higher part of the 5 GHZ spectrum (contained in this message)

* origin of the board files:

The board file was provided by the manifacturer, who provided the original patch to support the device in OpenWRt.

* ids to be used with the board files

+ bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=GL-B2200
SHA256: 7016cac25e5d35cf037f2f6aa63c03bd124fb521ec40c7843eb9d8424afa1a20

* attached files:

The names of the files are equal to the ID strings in the board-2.bin files, minus the .bin extension of course.

Kind regards,

Enrico

[-- Attachment #2: Type: application/octet-stream, Size: 12064 bytes --]

[-- Attachment #3: Type: text/plain, Size: 146 bytes --]

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: [V2] ath10k-firmware: QCA9888 hw2.0: add GL.iNet GL-B2200 specific board file

[Kalle Valo]

Enrico Mioso <mrkiko.rs@gmail.com> writes:

> I would like to add a board file for the PCI-E Wi-Fi interface present
> on the GL.iNet GL-B2200 mesh router, a device added a while ago to
> OpenWRt.
>
> * Hardware description:
>
> This device seems based on IPQ4019 / AP-DK04.1-C3.
> Three radios are used:
> - one QCA4019 radio is used for 2.4 GHZ operation (submitted on a previous message)
> - one QCA4019 radio is used for 5 GHZ for operating on lower part of 5
> GHZ spectrum (submitted on a previous message)
> - a QCA9888V2 interface connected over PCI-E to operate on higher part
> of the 5 GHZ spectrum (contained in this message)
>
> * origin of the board files:
>
> The board file was provided by the manifacturer, who provided the
> original patch to support the device in OpenWRt.
>
> * ids to be used with the board files
>
> + bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=GL-B2200
> SHA256: 7016cac25e5d35cf037f2f6aa63c03bd124fb521ec40c7843eb9d8424afa1a20
>
> * attached files:
>
> The names of the files are equal to the ID strings in the board-2.bin
> files, minus the .bin extension of course.

Thanks, added to QCA9888/hw2.0/board-2.bin:

New:
bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=GL-B2200

Changed:


Deleted:

1 board image(s) added, 0 changed, 0 deleted, 12 in total

https://github.com/kvalo/ath10k-firmware/commit/b'302f5e8de61f53fd48a64455758e07700647818e'

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k