All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH] [v2] mt76: mt7915: fix unused 'mode' variable
@ 2021-02-26 14:21 ` Arnd Bergmann
  0 siblings, 0 replies; 5+ messages in thread
From: Arnd Bergmann @ 2021-02-26 14:21 UTC (permalink / raw)
  To: Felix Fietkau, Lorenzo Bianconi, Kalle Valo
  Cc: Arnd Bergmann, Ryder Lee, David S. Miller, Jakub Kicinski,
	Nathan Chancellor, Nick Desaulniers, linux-arm-kernel,
	linux-mediatek, linux-kernel, clang-built-linux

From: Arnd Bergmann <arnd@arndb.de>

clang points out a possible corner case in the mt7915_tm_set_tx_cont()
function if called with invalid arguments:

drivers/net/wireless/mediatek/mt76/mt7915/testmode.c:593:2: warning: variable 'mode' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized]
        default:
        ^~~~~~~
drivers/net/wireless/mediatek/mt76/mt7915/testmode.c:597:13: note: uninitialized use occurs here
        rateval =  mode << 6 | rate_idx;
                   ^~~~
drivers/net/wireless/mediatek/mt76/mt7915/testmode.c:506:37: note: initialize the variable 'mode' to silence this warning
        u8 rate_idx = td->tx_rate_idx, mode;
                                           ^

Change it to return an error instead of continuing with invalid data
here.

Fixes: 3f0caa3cbf94 ("mt76: mt7915: add support for continuous tx in testmode")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
v2: remove the extra 'break;' after return.
---
 drivers/net/wireless/mediatek/mt76/mt7915/testmode.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/testmode.c b/drivers/net/wireless/mediatek/mt76/mt7915/testmode.c
index 7fb2170a9561..bd798df748ba 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/testmode.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/testmode.c
@@ -543,7 +543,7 @@ mt7915_tm_set_tx_cont(struct mt7915_phy *phy, bool en)
 		tx_cont->bw = CMD_CBW_20MHZ;
 		break;
 	default:
-		break;
+		return -EINVAL;
 	}
 
 	if (!en) {
@@ -591,7 +591,7 @@ mt7915_tm_set_tx_cont(struct mt7915_phy *phy, bool en)
 		mode = MT_PHY_TYPE_HE_MU;
 		break;
 	default:
-		break;
+		return -EINVAL;
 	}
 
 	rateval =  mode << 6 | rate_idx;
-- 
2.29.2


^ permalink raw reply related	[flat|nested] 5+ messages in thread
* [PATCH] [v2] mt76: mt7915: fix unused 'mode' variable
@ 2021-02-26 14:21 ` Arnd Bergmann
  0 siblings, 0 replies; 5+ messages in thread
From: Arnd Bergmann @ 2021-02-26 14:21 UTC (permalink / raw)
  To: Felix Fietkau, Lorenzo Bianconi, Kalle Valo
  Cc: Ryder Lee, Arnd Bergmann, Nick Desaulniers, linux-kernel,
	Nathan Chancellor, clang-built-linux, linux-mediatek,
	Jakub Kicinski, David S. Miller, linux-arm-kernel

From: Arnd Bergmann <arnd@arndb.de>

clang points out a possible corner case in the mt7915_tm_set_tx_cont()
function if called with invalid arguments:

drivers/net/wireless/mediatek/mt76/mt7915/testmode.c:593:2: warning: variable 'mode' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized]
        default:
        ^~~~~~~
drivers/net/wireless/mediatek/mt76/mt7915/testmode.c:597:13: note: uninitialized use occurs here
        rateval =  mode << 6 | rate_idx;
                   ^~~~
drivers/net/wireless/mediatek/mt76/mt7915/testmode.c:506:37: note: initialize the variable 'mode' to silence this warning
        u8 rate_idx = td->tx_rate_idx, mode;
                                           ^

Change it to return an error instead of continuing with invalid data
here.

Fixes: 3f0caa3cbf94 ("mt76: mt7915: add support for continuous tx in testmode")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
v2: remove the extra 'break;' after return.
---
 drivers/net/wireless/mediatek/mt76/mt7915/testmode.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/testmode.c b/drivers/net/wireless/mediatek/mt76/mt7915/testmode.c
index 7fb2170a9561..bd798df748ba 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/testmode.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/testmode.c
@@ -543,7 +543,7 @@ mt7915_tm_set_tx_cont(struct mt7915_phy *phy, bool en)
 		tx_cont->bw = CMD_CBW_20MHZ;
 		break;
 	default:
-		break;
+		return -EINVAL;
 	}
 
 	if (!en) {
@@ -591,7 +591,7 @@ mt7915_tm_set_tx_cont(struct mt7915_phy *phy, bool en)
 		mode = MT_PHY_TYPE_HE_MU;
 		break;
 	default:
-		break;
+		return -EINVAL;
 	}
 
 	rateval =  mode << 6 | rate_idx;
-- 
2.29.2


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 5+ messages in thread
* [PATCH] [v2] mt76: mt7915: fix unused 'mode' variable
@ 2021-02-26 14:21 ` Arnd Bergmann
  0 siblings, 0 replies; 5+ messages in thread
From: Arnd Bergmann @ 2021-02-26 14:21 UTC (permalink / raw)
  To: Felix Fietkau, Lorenzo Bianconi, Kalle Valo
  Cc: Ryder Lee, Arnd Bergmann, Nick Desaulniers, linux-kernel,
	Nathan Chancellor, clang-built-linux, linux-mediatek,
	Jakub Kicinski, David S. Miller, linux-arm-kernel

From: Arnd Bergmann <arnd@arndb.de>

clang points out a possible corner case in the mt7915_tm_set_tx_cont()
function if called with invalid arguments:

drivers/net/wireless/mediatek/mt76/mt7915/testmode.c:593:2: warning: variable 'mode' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized]
        default:
        ^~~~~~~
drivers/net/wireless/mediatek/mt76/mt7915/testmode.c:597:13: note: uninitialized use occurs here
        rateval =  mode << 6 | rate_idx;
                   ^~~~
drivers/net/wireless/mediatek/mt76/mt7915/testmode.c:506:37: note: initialize the variable 'mode' to silence this warning
        u8 rate_idx = td->tx_rate_idx, mode;
                                           ^

Change it to return an error instead of continuing with invalid data
here.

Fixes: 3f0caa3cbf94 ("mt76: mt7915: add support for continuous tx in testmode")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
v2: remove the extra 'break;' after return.
---
 drivers/net/wireless/mediatek/mt76/mt7915/testmode.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/testmode.c b/drivers/net/wireless/mediatek/mt76/mt7915/testmode.c
index 7fb2170a9561..bd798df748ba 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/testmode.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/testmode.c
@@ -543,7 +543,7 @@ mt7915_tm_set_tx_cont(struct mt7915_phy *phy, bool en)
 		tx_cont->bw = CMD_CBW_20MHZ;
 		break;
 	default:
-		break;
+		return -EINVAL;
 	}
 
 	if (!en) {
@@ -591,7 +591,7 @@ mt7915_tm_set_tx_cont(struct mt7915_phy *phy, bool en)
 		mode = MT_PHY_TYPE_HE_MU;
 		break;
 	default:
-		break;
+		return -EINVAL;
 	}
 
 	rateval =  mode << 6 | rate_idx;
-- 
2.29.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 5+ messages in thread
* Re: [PATCH] [v2] mt76: mt7915: fix unused 'mode' variable
  2021-02-26 14:21 ` Arnd Bergmann
@ 2021-02-26 15:37   ` Kalle Valo
  -1 siblings, 0 replies; 5+ messages in thread
From: Kalle Valo @ 2021-02-26 15:37 UTC (permalink / raw)
  To: Arnd Bergmann
  Cc: Felix Fietkau, Lorenzo Bianconi, Arnd Bergmann, Ryder Lee,
	David S. Miller, Jakub Kicinski, Nathan Chancellor,
	Nick Desaulniers, linux-arm-kernel, linux-mediatek, linux-kernel,
	clang-built-linux, linux-wireless

+ linux-wireless

Arnd Bergmann <arnd@kernel.org> writes:

> From: Arnd Bergmann <arnd@arndb.de>
>
> clang points out a possible corner case in the mt7915_tm_set_tx_cont()
> function if called with invalid arguments:
>
> drivers/net/wireless/mediatek/mt76/mt7915/testmode.c:593:2: warning: variable 'mode' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized]
>         default:
>         ^~~~~~~
> drivers/net/wireless/mediatek/mt76/mt7915/testmode.c:597:13: note: uninitialized use occurs here
>         rateval =  mode << 6 | rate_idx;
>                    ^~~~
> drivers/net/wireless/mediatek/mt76/mt7915/testmode.c:506:37: note: initialize the variable 'mode' to silence this warning
>         u8 rate_idx = td->tx_rate_idx, mode;
>                                            ^
>
> Change it to return an error instead of continuing with invalid data
> here.
>
> Fixes: 3f0caa3cbf94 ("mt76: mt7915: add support for continuous tx in testmode")
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> v2: remove the extra 'break;' after return.
> ---
>  drivers/net/wireless/mediatek/mt76/mt7915/testmode.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)

You forgot to Cc linux-wireless and hence patchwork didn't see this, so
I applied this manually instead:

c490492f15f6 mt76: mt7915: fix unused 'mode' variable

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

^ permalink raw reply	[flat|nested] 5+ messages in thread
* Re: [PATCH] [v2] mt76: mt7915: fix unused 'mode' variable
@ 2021-02-26 15:37   ` Kalle Valo
  0 siblings, 0 replies; 5+ messages in thread
From: Kalle Valo @ 2021-02-26 15:37 UTC (permalink / raw)
  To: Arnd Bergmann
  Cc: Ryder Lee, Arnd Bergmann, linux-wireless, Nick Desaulniers,
	linux-kernel, Nathan Chancellor, clang-built-linux,
	linux-mediatek, Lorenzo Bianconi, Jakub Kicinski,
	David S. Miller, linux-arm-kernel, Felix Fietkau

+ linux-wireless

Arnd Bergmann <arnd@kernel.org> writes:

> From: Arnd Bergmann <arnd@arndb.de>
>
> clang points out a possible corner case in the mt7915_tm_set_tx_cont()
> function if called with invalid arguments:
>
> drivers/net/wireless/mediatek/mt76/mt7915/testmode.c:593:2: warning: variable 'mode' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized]
>         default:
>         ^~~~~~~
> drivers/net/wireless/mediatek/mt76/mt7915/testmode.c:597:13: note: uninitialized use occurs here
>         rateval =  mode << 6 | rate_idx;
>                    ^~~~
> drivers/net/wireless/mediatek/mt76/mt7915/testmode.c:506:37: note: initialize the variable 'mode' to silence this warning
>         u8 rate_idx = td->tx_rate_idx, mode;
>                                            ^
>
> Change it to return an error instead of continuing with invalid data
> here.
>
> Fixes: 3f0caa3cbf94 ("mt76: mt7915: add support for continuous tx in testmode")
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> v2: remove the extra 'break;' after return.
> ---
>  drivers/net/wireless/mediatek/mt76/mt7915/testmode.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)

You forgot to Cc linux-wireless and hence patchwork didn't see this, so
I applied this manually instead:

c490492f15f6 mt76: mt7915: fix unused 'mode' variable

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-02-26 15:38 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-02-26 14:21 [PATCH] [v2] mt76: mt7915: fix unused 'mode' variable Arnd Bergmann
2021-02-26 14:21 ` Arnd Bergmann
2021-02-26 14:21 ` Arnd Bergmann
2021-02-26 15:37 ` Kalle Valo
2021-02-26 15:37   ` Kalle Valo

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.