* [Qemu-devel] [PATCH 0/2] small create_config cleanup
@ 2019-07-11 17:22 Paolo Bonzini
2019-07-11 17:22 ` [Qemu-devel] [PATCH 1/2] Makefile: do not repeat $(CONFIG_SOFTMMU) in hw/Makefile.objs Paolo Bonzini
2019-07-11 17:22 ` [Qemu-devel] [PATCH 2/2] create_config: remove $(CONFIG_SOFTMMU) hack Paolo Bonzini
0 siblings, 2 replies; 6+ messages in thread
From: Paolo Bonzini @ 2019-07-11 17:22 UTC (permalink / raw)
To: qemu-devel; +Cc: philmd
Noticed while reviewing the config-devices.h, decided to remove
it since it confused Philippe as well.
Paolo Bonzini (2):
Makefile: do not repeat $(CONFIG_SOFTMMU) in hw/Makefile.objs
create_config: remove $(CONFIG_SOFTMMU) hack
configure | 2 +-
hw/Makefile.objs | 61 +++++++++++++++++++++++++++------------------------
scripts/create_config | 2 +-
3 files changed, 34 insertions(+), 31 deletions(-)
--
1.8.3.1
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Qemu-devel] [PATCH 1/2] Makefile: do not repeat $(CONFIG_SOFTMMU) in hw/Makefile.objs
2019-07-11 17:22 [Qemu-devel] [PATCH 0/2] small create_config cleanup Paolo Bonzini
@ 2019-07-11 17:22 ` Paolo Bonzini
2019-07-12 6:09 ` Markus Armbruster
2019-07-11 17:22 ` [Qemu-devel] [PATCH 2/2] create_config: remove $(CONFIG_SOFTMMU) hack Paolo Bonzini
1 sibling, 1 reply; 6+ messages in thread
From: Paolo Bonzini @ 2019-07-11 17:22 UTC (permalink / raw)
To: qemu-devel; +Cc: philmd
The device directories must be included only for softmmu builds.
Instead of repeating $(CONFIG_SOFTMMU), use an "ifeq".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/Makefile.objs | 61 +++++++++++++++++++++++++++++---------------------------
1 file changed, 32 insertions(+), 29 deletions(-)
diff --git a/hw/Makefile.objs b/hw/Makefile.objs
index d770926..ece6cc3 100644
--- a/hw/Makefile.objs
+++ b/hw/Makefile.objs
@@ -1,42 +1,45 @@
+devices-dirs-y = core/
+ifeq ($(CONFIG_SOFTMMU), y)
devices-dirs-$(call lor,$(CONFIG_VIRTIO_9P),$(call land,$(CONFIG_VIRTFS),$(CONFIG_XEN))) += 9pfs/
-devices-dirs-$(CONFIG_SOFTMMU) += acpi/
-devices-dirs-$(CONFIG_SOFTMMU) += adc/
-devices-dirs-$(CONFIG_SOFTMMU) += audio/
-devices-dirs-$(CONFIG_SOFTMMU) += block/
-devices-dirs-$(CONFIG_SOFTMMU) += bt/
-devices-dirs-$(CONFIG_SOFTMMU) += char/
-devices-dirs-$(CONFIG_SOFTMMU) += cpu/
-devices-dirs-$(CONFIG_SOFTMMU) += display/
-devices-dirs-$(CONFIG_SOFTMMU) += dma/
-devices-dirs-$(CONFIG_SOFTMMU) += gpio/
+devices-dirs-y += acpi/
+devices-dirs-y += adc/
+devices-dirs-y += audio/
+devices-dirs-y += block/
+devices-dirs-y += bt/
+devices-dirs-y += char/
+devices-dirs-y += cpu/
+devices-dirs-y += display/
+devices-dirs-y += dma/
+devices-dirs-y += gpio/
devices-dirs-$(CONFIG_HYPERV) += hyperv/
devices-dirs-$(CONFIG_I2C) += i2c/
-devices-dirs-$(CONFIG_SOFTMMU) += ide/
-devices-dirs-$(CONFIG_SOFTMMU) += input/
-devices-dirs-$(CONFIG_SOFTMMU) += intc/
+devices-dirs-y += ide/
+devices-dirs-y += input/
+devices-dirs-y += intc/
devices-dirs-$(CONFIG_IPACK) += ipack/
devices-dirs-$(CONFIG_IPMI) += ipmi/
-devices-dirs-$(CONFIG_SOFTMMU) += isa/
-devices-dirs-$(CONFIG_SOFTMMU) += misc/
-devices-dirs-$(CONFIG_SOFTMMU) += net/
-devices-dirs-$(CONFIG_SOFTMMU) += rdma/
-devices-dirs-$(CONFIG_SOFTMMU) += nvram/
-devices-dirs-$(CONFIG_SOFTMMU) += pci/
+devices-dirs-y += isa/
+devices-dirs-y += misc/
+devices-dirs-y += net/
+devices-dirs-y += rdma/
+devices-dirs-y += nvram/
+devices-dirs-y += pci/
devices-dirs-$(CONFIG_PCI) += pci-bridge/ pci-host/
-devices-dirs-$(CONFIG_SOFTMMU) += pcmcia/
+devices-dirs-y += pcmcia/
devices-dirs-$(CONFIG_SCSI) += scsi/
-devices-dirs-$(CONFIG_SOFTMMU) += sd/
-devices-dirs-$(CONFIG_SOFTMMU) += ssi/
-devices-dirs-$(CONFIG_SOFTMMU) += timer/
+devices-dirs-y += sd/
+devices-dirs-y += ssi/
+devices-dirs-y += timer/
devices-dirs-$(CONFIG_TPM) += tpm/
-devices-dirs-$(CONFIG_SOFTMMU) += usb/
+devices-dirs-y += usb/
devices-dirs-$(CONFIG_VFIO) += vfio/
-devices-dirs-$(CONFIG_SOFTMMU) += virtio/
-devices-dirs-$(CONFIG_SOFTMMU) += watchdog/
-devices-dirs-$(CONFIG_SOFTMMU) += xen/
+devices-dirs-y += virtio/
+devices-dirs-y += watchdog/
+devices-dirs-y += xen/
devices-dirs-$(CONFIG_MEM_DEVICE) += mem/
-devices-dirs-$(CONFIG_SOFTMMU) += smbios/
devices-dirs-y += semihosting/
-devices-dirs-y += core/
+devices-dirs-y += smbios/
+endif
+
common-obj-y += $(devices-dirs-y)
obj-y += $(devices-dirs-y)
--
1.8.3.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [Qemu-devel] [PATCH 1/2] Makefile: do not repeat $(CONFIG_SOFTMMU) in hw/Makefile.objs
2019-07-11 17:22 ` [Qemu-devel] [PATCH 1/2] Makefile: do not repeat $(CONFIG_SOFTMMU) in hw/Makefile.objs Paolo Bonzini
@ 2019-07-12 6:09 ` Markus Armbruster
0 siblings, 0 replies; 6+ messages in thread
From: Markus Armbruster @ 2019-07-12 6:09 UTC (permalink / raw)
To: Paolo Bonzini; +Cc: philmd, qemu-devel
Paolo Bonzini <pbonzini@redhat.com> writes:
> The device directories must be included only for softmmu builds.
> Instead of repeating $(CONFIG_SOFTMMU), use an "ifeq".
>
> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
> ---
> hw/Makefile.objs | 61 +++++++++++++++++++++++++++++---------------------------
> 1 file changed, 32 insertions(+), 29 deletions(-)
>
> diff --git a/hw/Makefile.objs b/hw/Makefile.objs
> index d770926..ece6cc3 100644
> --- a/hw/Makefile.objs
> +++ b/hw/Makefile.objs
> @@ -1,42 +1,45 @@
> +devices-dirs-y = core/
> +ifeq ($(CONFIG_SOFTMMU), y)
> devices-dirs-$(call lor,$(CONFIG_VIRTIO_9P),$(call land,$(CONFIG_VIRTFS),$(CONFIG_XEN))) += 9pfs/
> -devices-dirs-$(CONFIG_SOFTMMU) += acpi/
> -devices-dirs-$(CONFIG_SOFTMMU) += adc/
> -devices-dirs-$(CONFIG_SOFTMMU) += audio/
> -devices-dirs-$(CONFIG_SOFTMMU) += block/
> -devices-dirs-$(CONFIG_SOFTMMU) += bt/
> -devices-dirs-$(CONFIG_SOFTMMU) += char/
> -devices-dirs-$(CONFIG_SOFTMMU) += cpu/
> -devices-dirs-$(CONFIG_SOFTMMU) += display/
> -devices-dirs-$(CONFIG_SOFTMMU) += dma/
> -devices-dirs-$(CONFIG_SOFTMMU) += gpio/
> +devices-dirs-y += acpi/
> +devices-dirs-y += adc/
> +devices-dirs-y += audio/
> +devices-dirs-y += block/
> +devices-dirs-y += bt/
> +devices-dirs-y += char/
> +devices-dirs-y += cpu/
> +devices-dirs-y += display/
> +devices-dirs-y += dma/
> +devices-dirs-y += gpio/
> devices-dirs-$(CONFIG_HYPERV) += hyperv/
> devices-dirs-$(CONFIG_I2C) += i2c/
> -devices-dirs-$(CONFIG_SOFTMMU) += ide/
> -devices-dirs-$(CONFIG_SOFTMMU) += input/
> -devices-dirs-$(CONFIG_SOFTMMU) += intc/
> +devices-dirs-y += ide/
> +devices-dirs-y += input/
> +devices-dirs-y += intc/
> devices-dirs-$(CONFIG_IPACK) += ipack/
> devices-dirs-$(CONFIG_IPMI) += ipmi/
> -devices-dirs-$(CONFIG_SOFTMMU) += isa/
> -devices-dirs-$(CONFIG_SOFTMMU) += misc/
> -devices-dirs-$(CONFIG_SOFTMMU) += net/
> -devices-dirs-$(CONFIG_SOFTMMU) += rdma/
> -devices-dirs-$(CONFIG_SOFTMMU) += nvram/
> -devices-dirs-$(CONFIG_SOFTMMU) += pci/
> +devices-dirs-y += isa/
> +devices-dirs-y += misc/
> +devices-dirs-y += net/
> +devices-dirs-y += rdma/
> +devices-dirs-y += nvram/
> +devices-dirs-y += pci/
> devices-dirs-$(CONFIG_PCI) += pci-bridge/ pci-host/
> -devices-dirs-$(CONFIG_SOFTMMU) += pcmcia/
> +devices-dirs-y += pcmcia/
> devices-dirs-$(CONFIG_SCSI) += scsi/
> -devices-dirs-$(CONFIG_SOFTMMU) += sd/
> -devices-dirs-$(CONFIG_SOFTMMU) += ssi/
> -devices-dirs-$(CONFIG_SOFTMMU) += timer/
> +devices-dirs-y += sd/
> +devices-dirs-y += ssi/
> +devices-dirs-y += timer/
> devices-dirs-$(CONFIG_TPM) += tpm/
> -devices-dirs-$(CONFIG_SOFTMMU) += usb/
> +devices-dirs-y += usb/
> devices-dirs-$(CONFIG_VFIO) += vfio/
> -devices-dirs-$(CONFIG_SOFTMMU) += virtio/
> -devices-dirs-$(CONFIG_SOFTMMU) += watchdog/
> -devices-dirs-$(CONFIG_SOFTMMU) += xen/
> +devices-dirs-y += virtio/
> +devices-dirs-y += watchdog/
> +devices-dirs-y += xen/
> devices-dirs-$(CONFIG_MEM_DEVICE) += mem/
> -devices-dirs-$(CONFIG_SOFTMMU) += smbios/
> devices-dirs-y += semihosting/
This one is now conditional on CONFIG_SOFTMMU. Intentional?
> -devices-dirs-y += core/
> +devices-dirs-y += smbios/
> +endif
> +
> common-obj-y += $(devices-dirs-y)
> obj-y += $(devices-dirs-y)
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Qemu-devel] [PATCH 2/2] create_config: remove $(CONFIG_SOFTMMU) hack
2019-07-11 17:22 [Qemu-devel] [PATCH 0/2] small create_config cleanup Paolo Bonzini
2019-07-11 17:22 ` [Qemu-devel] [PATCH 1/2] Makefile: do not repeat $(CONFIG_SOFTMMU) in hw/Makefile.objs Paolo Bonzini
@ 2019-07-11 17:22 ` Paolo Bonzini
2019-07-11 17:47 ` Philippe Mathieu-Daudé
2019-07-11 18:31 ` Montes, Julio
1 sibling, 2 replies; 6+ messages in thread
From: Paolo Bonzini @ 2019-07-11 17:22 UTC (permalink / raw)
To: qemu-devel; +Cc: philmd
CONFIG_TPM is defined to a rather weird $(CONFIG_SOFTMMU) so that it
expands to the right thing in hw/Makefile.objs. This however is not
needed anymore and it has a corresponding hack in create_config
to turn it into "#define CONFIG_TPM 1". Clean up.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
configure | 2 +-
scripts/create_config | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/configure b/configure
index 4983c8b..eb635c3 100755
--- a/configure
+++ b/configure
@@ -7159,7 +7159,7 @@ if test "$live_block_migration" = "yes" ; then
fi
if test "$tpm" = "yes"; then
- echo 'CONFIG_TPM=$(CONFIG_SOFTMMU)' >> $config_host_mak
+ echo 'CONFIG_TPM=y' >> $config_host_mak
fi
echo "TRACE_BACKENDS=$trace_backends" >> $config_host_mak
diff --git a/scripts/create_config b/scripts/create_config
index 00e86c8..6d8f08b 100755
--- a/scripts/create_config
+++ b/scripts/create_config
@@ -54,7 +54,7 @@ case $line in
done
echo " NULL"
;;
- CONFIG_*='$(CONFIG_SOFTMMU)'|CONFIG_*=y) # configuration
+ CONFIG_*=y) # configuration
name=${line%=*}
echo "#define $name 1"
;;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [Qemu-devel] [PATCH 2/2] create_config: remove $(CONFIG_SOFTMMU) hack
2019-07-11 17:22 ` [Qemu-devel] [PATCH 2/2] create_config: remove $(CONFIG_SOFTMMU) hack Paolo Bonzini
@ 2019-07-11 17:47 ` Philippe Mathieu-Daudé
2019-07-11 18:31 ` Montes, Julio
1 sibling, 0 replies; 6+ messages in thread
From: Philippe Mathieu-Daudé @ 2019-07-11 17:47 UTC (permalink / raw)
To: Paolo Bonzini, qemu-devel
On 7/11/19 7:22 PM, Paolo Bonzini wrote:
> CONFIG_TPM is defined to a rather weird $(CONFIG_SOFTMMU) so that it
> expands to the right thing in hw/Makefile.objs. This however is not
> needed anymore and it has a corresponding hack in create_config
> to turn it into "#define CONFIG_TPM 1". Clean up.
>
> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
> ---
> configure | 2 +-
> scripts/create_config | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/configure b/configure
> index 4983c8b..eb635c3 100755
> --- a/configure
> +++ b/configure
> @@ -7159,7 +7159,7 @@ if test "$live_block_migration" = "yes" ; then
> fi
>
> if test "$tpm" = "yes"; then
> - echo 'CONFIG_TPM=$(CONFIG_SOFTMMU)' >> $config_host_mak
> + echo 'CONFIG_TPM=y' >> $config_host_mak
> fi
>
> echo "TRACE_BACKENDS=$trace_backends" >> $config_host_mak
> diff --git a/scripts/create_config b/scripts/create_config
> index 00e86c8..6d8f08b 100755
> --- a/scripts/create_config
> +++ b/scripts/create_config
> @@ -54,7 +54,7 @@ case $line in
> done
> echo " NULL"
> ;;
> - CONFIG_*='$(CONFIG_SOFTMMU)'|CONFIG_*=y) # configuration
> + CONFIG_*=y) # configuration
> name=${line%=*}
> echo "#define $name 1"
> ;;
>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [Qemu-devel] [PATCH 2/2] create_config: remove $(CONFIG_SOFTMMU) hack
2019-07-11 17:22 ` [Qemu-devel] [PATCH 2/2] create_config: remove $(CONFIG_SOFTMMU) hack Paolo Bonzini
2019-07-11 17:47 ` Philippe Mathieu-Daudé
@ 2019-07-11 18:31 ` Montes, Julio
1 sibling, 0 replies; 6+ messages in thread
From: Montes, Julio @ 2019-07-11 18:31 UTC (permalink / raw)
To: qemu-devel, pbonzini; +Cc: philmd
lgtm, thanks Paolo
Reviewed-by: Julio Montes <julio.montes@intel.com>
Tested-by: Julio Montes <julio.montes@intel.com>
On Thu, 2019-07-11 at 19:22 +0200, Paolo Bonzini wrote:
> CONFIG_TPM is defined to a rather weird $(CONFIG_SOFTMMU) so that it
> expands to the right thing in hw/Makefile.objs. This however is not
> needed anymore and it has a corresponding hack in create_config
> to turn it into "#define CONFIG_TPM 1". Clean up.
>
> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
> ---
> configure | 2 +-
> scripts/create_config | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/configure b/configure
> index 4983c8b..eb635c3 100755
> --- a/configure
> +++ b/configure
> @@ -7159,7 +7159,7 @@ if test "$live_block_migration" = "yes" ; then
> fi
>
> if test "$tpm" = "yes"; then
> - echo 'CONFIG_TPM=$(CONFIG_SOFTMMU)' >> $config_host_mak
> + echo 'CONFIG_TPM=y' >> $config_host_mak
> fi
>
> echo "TRACE_BACKENDS=$trace_backends" >> $config_host_mak
> diff --git a/scripts/create_config b/scripts/create_config
> index 00e86c8..6d8f08b 100755
> --- a/scripts/create_config
> +++ b/scripts/create_config
> @@ -54,7 +54,7 @@ case $line in
> done
> echo " NULL"
> ;;
> - CONFIG_*='$(CONFIG_SOFTMMU)'|CONFIG_*=y) # configuration
> + CONFIG_*=y) # configuration
> name=${line%=*}
> echo "#define $name 1"
> ;;
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-07-12 6:10 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-11 17:22 [Qemu-devel] [PATCH 0/2] small create_config cleanup Paolo Bonzini
2019-07-11 17:22 ` [Qemu-devel] [PATCH 1/2] Makefile: do not repeat $(CONFIG_SOFTMMU) in hw/Makefile.objs Paolo Bonzini
2019-07-12 6:09 ` Markus Armbruster
2019-07-11 17:22 ` [Qemu-devel] [PATCH 2/2] create_config: remove $(CONFIG_SOFTMMU) hack Paolo Bonzini
2019-07-11 17:47 ` Philippe Mathieu-Daudé
2019-07-11 18:31 ` Montes, Julio
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.