From: Gregory CLEMENT <gregory.clement@free-electrons.com>
To: Stephen Boyd <sboyd@codeaurora.org>
Cc: Linus Walleij <linus.walleij@linaro.org>,
Chris Packham <chris.packham@alliedtelesis.co.nz>,
Mark Rutland <mark.rutland@arm.com>, Andrew Lunn <andrew@lunn.ch>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Michael Turquette <mturquette@baylibre.com>,
Laxman Dewangan <ldewangan@nvidia.com>,
linux-clk@vger.kernel.org,
Florian Fainelli <f.fainelli@gmail.com>,
Juri Lelli <juri.lelli@arm.com>,
linux@armlinux.org.uk, Thierry Reding <treding@nvidia.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
devicetree@vger.kernel.org, Jason Cooper <jason@lakedaemon.net>,
Arnd Bergmann <arnd@arndb.de>,
linux-gpio@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
Chris Brand <chris.brand@broadcom.com>,
linux-arm-kernel@lists.infradead.org, Thomas Petazzoni <thoma>
Subject: Re: [PATCHv5 0/5] Support for Marvell switches with integrated CPUs
Date: Fri, 27 Jan 2017 17:49:27 +0100 [thread overview]
Message-ID: <87o9yswiqw.fsf@free-electrons.com> (raw)
In-Reply-To: <87wpdgwj72.fsf@free-electrons.com> (Gregory CLEMENT's message of "Fri, 27 Jan 2017 17:39:45 +0100")
Hi,
On ven., janv. 27 2017, Gregory CLEMENT <gregory.clement@free-electrons.com> wrote:
> Hi all,
>
> On ven., janv. 27 2017, Chris Packham <chris.packham@alliedtelesis.co.nz> wrote:
>
>> The 98DX3236, 98DX3336 and 98DX4251 are a set of switch ASICs with
>> integrated CPUs. They CPU block is common within these product lines and
>> (as far as I can tell/have been told) is based on the Armada XP. There
>> are a few differences due to the fact they have to squeeze the CPU into
>> the same package as the switch.
>>
>> I've rebased this series against linux-pinctrl/devel to get access to
>> mvebu_mmio_mpp_ctrl. Everything else still applies cleanly to
>> v4.10.0-rc5.
>
> Just to let you know that I plan to apply the 3 arm patch once Chris
> will have sent the new series with the minor fixes I asked on patch 3.
I meant patch 2!
And now patch 5 too :)
Gregory
> I already applied them in the for-next branch to benefit of some build
> test coverage.
>
> Stephen,
>
> you gave your Acked-by on the first patch, but don't you plan to apply
> it on the clk branch?
>
> If you really want I can apply on mvebu but there is no build
> dependencies, so the order the patches will be merged is not important.
>
> Linus,
>
> I expect you will apply the pinctrl patch on your tree as it depend of
> code already there.
>
> Thanks,
>
> Gregory
>
>>
>> Chris Packham (4):
>> clk: mvebu: support for 98DX3236 SoC
>> Changes in v2:
>> - Update devicetree binding documentation for new compatible string
>> Changes in v3:
>> - Add 98dx3236 support to mvebu/clk-corediv.c rather than creating a new
>> driver.
>> - Document mv98dx3236-corediv-clock binding
>> Changes in v4:
>> - None
>> Changes in v5:
>> - Collect ack from Rob
>> - Remove explicit initialisation of fields to 0 in mv98dx3236_coreclks
>> - Register dummy clock provider for marvell,mv98dx3236-cpu-clock
>> arm: mvebu: support for SMP on 98DX3336 SoC
>> Changes in v2:
>> - Document new enable-method value
>> - Correct some references from 98DX4521 to 98DX3236
>> Changes in v3:
>> - Simplify mv98dx3236_resume_init by using of_io_request_and_map()
>> Changes in v4:
>> - integrate changes into platsmp.c instead of new init call
>> - avoid duplicated code.
>> - fix error return
>> - Collect ack from Rob
>> Changes in v5:
>> - Remove useless casts (thanks to Stephen Boyd)
>> arm: mvebu: Add device tree for 98DX3236 SoCs
>> Changes in v2:
>> - Update devicetree binding documentation to reflect that 98DX3336 and
>> 984251 are supersets of 98DX3236.
>> - disable crypto block
>> - disable sdio for 98DX3236, enable for 98DX4251
>> Changes in v3:
>> - fix typo 4521 -> 4251
>> - document prestera bindings
>> - rework corediv-clock binding
>> - add label to packet processor node
>> - add new compatible string for DFX server
>> Changes in v4:
>> - Collect ack from Rob
>> Changes in v5:
>> - Fixup license text. Add labels to nodes.
>> arm: mvebu: Add device tree for db-dxbc2 and db-xc3-24g4xg boards
>> Changes in v5:
>> - update license text
>> - use node labels
>>
>> Kalyan Kinthada (1):
>> pinctrl: mvebu: pinctrl driver for 98DX3236 SoC
>> Changes in v2:
>> - include sdio support for the 98DX4251
>> Changes in v3:
>> - None
>> Changes in v4:
>> - Correct some discrepencies between binding and driver.
>> - Collect acks from Rob and Sebastian
>> Changes in v5:
>> - Update bindings to reflect "gpo" pins
>> - Use mvebu_mmio_mpp_ctrl instead of armada_xp_mpp_ctrl (note this is reliant
>> on changes queued in linux-pinctrl)
>>
>> Documentation/devicetree/bindings/arm/cpus.txt | 1 +
>> .../bindings/arm/marvell/98dx3236-resume-ctrl.txt | 16 ++
>> .../devicetree/bindings/arm/marvell/98dx3236.txt | 23 ++
>> .../bindings/clock/mvebu-corediv-clock.txt | 1 +
>> .../devicetree/bindings/clock/mvebu-cpu-clock.txt | 1 +
>> .../devicetree/bindings/net/marvell,prestera.txt | 50 ++++
>> .../pinctrl/marvell,armada-98dx3236-pinctrl.txt | 46 ++++
>> arch/arm/boot/dts/armada-xp-98dx3236.dtsi | 254 +++++++++++++++++++++
>> arch/arm/boot/dts/armada-xp-98dx3336.dtsi | 76 ++++++
>> arch/arm/boot/dts/armada-xp-98dx4251.dtsi | 90 ++++++++
>> arch/arm/boot/dts/db-dxbc2.dts | 151 ++++++++++++
>> arch/arm/boot/dts/db-xc3-24g4xg.dts | 142 ++++++++++++
>> arch/arm/mach-mvebu/platsmp.c | 86 +++++++
>> drivers/clk/mvebu/armada-xp.c | 39 ++++
>> drivers/clk/mvebu/clk-corediv.c | 23 ++
>> drivers/clk/mvebu/clk-cpu.c | 8 +
>> drivers/pinctrl/mvebu/pinctrl-armada-xp.c | 156 +++++++++++++
>> 17 files changed, 1163 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
>> create mode 100644 Documentation/devicetree/bindings/arm/marvell/98dx3236.txt
>> create mode 100644 Documentation/devicetree/bindings/net/marvell,prestera.txt
>> create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
>> create mode 100644 arch/arm/boot/dts/armada-xp-98dx3236.dtsi
>> create mode 100644 arch/arm/boot/dts/armada-xp-98dx3336.dtsi
>> create mode 100644 arch/arm/boot/dts/armada-xp-98dx4251.dtsi
>> create mode 100644 arch/arm/boot/dts/db-dxbc2.dts
>> create mode 100644 arch/arm/boot/dts/db-xc3-24g4xg.dts
>>
>> interdiff to v4:
>>
>> diff --git a/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt
>> index 520562a7dc2a..c7b4e3a6b2c6 100644
>> @@ -85,7 +86,7 @@
>> by address and length of the PMU DFS registers
>> - #clock-cells : should be set to 1.
>> diff --git a/drivers/clk/mvebu/armada-xp.c b/drivers/clk/mvebu/armada-xp.c
>> -index b3094315a3c0..0413bf8284e0 100644
>> +index b3094315a3c0..890a863ae0d0 100644
>> --- a/drivers/clk/mvebu/armada-xp.c
>> +++ b/drivers/clk/mvebu/armada-xp.c
>> return 250000000;
>> @@ -118,9 +119,6 @@
>> +static const struct coreclk_soc_desc mv98dx3236_coreclks = {
>> + .get_tclk_freq = mv98dx3236_get_tclk_freq,
>> + .get_cpu_freq = mv98dx3236_get_cpu_freq,
>> -+ .get_clk_ratio = NULL,
>> -+ .ratios = NULL,
>> -+ .num_ratios = 0,
>> +};
>> +
>> /*
>> @@ -200,53 +198,16 @@
>> +CLK_OF_DECLARE(mv98dx3236_corediv_clk, "marvell,mv98dx3236-corediv-clock",
>> + mv98dx3236_corediv_clk_init);
>> diff --git a/drivers/clk/mvebu/clk-cpu.c b/drivers/clk/mvebu/clk-cpu.c
>> -index 5837eb8a212f..3b8f0e14fa01 100644
>> +index 5837eb8a212f..044892b6534d 100644
>> --- a/drivers/clk/mvebu/clk-cpu.c
>> +++ b/drivers/clk/mvebu/clk-cpu.c
>> - .set_rate = clk_cpu_set_rate,
>> - };
>> -
>> --static void __init of_cpu_clk_setup(struct device_node *node)
>> -+/* Add parameter to allow this to support different clock operations. */
>> -+static void __init _of_cpu_clk_setup(struct device_node *node,
>> -+ const struct clk_ops *cpu_clk_ops)
>> - {
>> - struct cpu_clk *cpuclk;
>> - void __iomem *clock_complex_base = of_iomap(node, 0);
>> - cpuclk[cpu].hw.init = &init;
>>
>> - init.name = cpuclk[cpu].clk_name;
>> -- init.ops = &cpu_ops;
>> -+ init.ops = cpu_clk_ops;
>> - init.flags = 0;
>> - init.parent_names = &cpuclk[cpu].parent_name;
>> - init.num_parents = 1;
>> - iounmap(clock_complex_base);
>> - }
>> -
>> -+/* Use this function to call the generic setup with the correct
>> -+ * clock operation
>> -+ */
>> -+static void __init of_cpu_clk_setup(struct device_node *node)
>> -+{
>> -+ _of_cpu_clk_setup(node, &cpu_ops);
>> -+}
>> -+
>> CLK_OF_DECLARE(armada_xp_cpu_clock, "marvell,armada-xp-cpu-clock",
>> of_cpu_clk_setup);
>> +
>> -+/* Define the clock and operations for the mv98dx3236 - it cannot perform
>> -+ * any operations.
>> -+ */
>> -+static const struct clk_ops mv98dx3236_cpu_ops = {
>> -+ .recalc_rate = NULL,
>> -+ .round_rate = NULL,
>> -+ .set_rate = NULL,
>> -+};
>> -+
>> +static void __init of_mv98dx3236_cpu_clk_setup(struct device_node *node)
>> +{
>> -+ _of_cpu_clk_setup(node, &mv98dx3236_cpu_ops);
>> ++ of_clk_add_provider(node, of_clk_src_simple_get, NULL);
>> +}
>> +
>> +CLK_OF_DECLARE(mv98dx3236_cpu_clock, "marvell,mv98dx3236-cpu-clock",
>> @@ -285,7 +247,7 @@
>> "qcom,gcc-msm8660"
>> diff --git
> a/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
> b/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
>> new file mode 100644
>> -index 000000000000..8082ba872edd
>> +index 000000000000..26eb9d3aa630
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
>> +Resume Control
>> @@ -304,10 +266,8 @@
>> + compatible = "marvell,98dx3336-resume-ctrl";
>> + reg = <0x20980 0x10>;
>> +};
>> -+
>> -+
>> diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c
>> -index 46c742d3bd41..59be3ca0464f 100644
>> +index 46c742d3bd41..a5b464497e1a 100644
>> --- a/arch/arm/mach-mvebu/platsmp.c
>> +++ b/arch/arm/mach-mvebu/platsmp.c
>>
>> @@ -327,7 +287,7 @@
>> +static const struct of_device_id of_mv98dx3236_resume_table[] = {
>> + {
>> + .compatible = "marvell,98dx3336-resume-ctrl",
>> -+ .data = (void *)&mv98dx3336_resume_controller,
>> ++ .data = &mv98dx3336_resume_controller,
>> + },
>> + { /* end of list */ },
>> +};
>> @@ -337,7 +297,7 @@
>> + const struct of_device_id *match;
>> + struct device_node *np;
>> + void __iomem *base;
>> -+ struct resume_controller *rc;
>> ++ const struct resume_controller *rc;
>> +
>> + WARN_ON(hw_cpu != 1);
>> +
>> @@ -347,7 +307,7 @@
>> + return -ENODEV;
>> +
>> + base = of_io_request_and_map(np, 0, of_node_full_name(np));
>> -+ rc = (struct resume_controller *)match->data;
>> ++ rc = match->data;
>> + of_node_put(np);
>> + if (IS_ERR(base))
>> + return PTR_ERR(base);
>> @@ -411,15 +371,17 @@
>> diff --git
> a/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
> b/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
>> new file mode 100644
>> -index 000000000000..d4e6ecdfc853
>> +index 000000000000..97aef67ee769
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
>> +* Marvell 98dx3236 pinctrl driver for mpp
>> @@ -435,41 +397,41 @@
>> +
>> +name pins functions
>> +================================================================================
>> -+mpp0 0 gpio, spi0(mosi), dev(ad8)
>> ++mpp0 0 gpo, spi0(mosi), dev(ad8)
>> +mpp1 1 gpio, spi0(miso), dev(ad9)
>> -+mpp2 2 gpio, spi0(sck), dev(ad10)
>> ++mpp2 2 gpo, spi0(sck), dev(ad10)
>> +mpp3 3 gpio, spi0(cs0), dev(ad11)
>> +mpp4 4 gpio, spi0(cs1), smi(mdc), dev(cs0)
>> +mpp5 5 gpio, pex(rsto), sd0(cmd), dev(bootcs)
>> -+mpp6 6 gpio, sd0(clk), dev(a2)
>> ++mpp6 6 gpo, sd0(clk), dev(a2)
>> +mpp7 7 gpio, sd0(d0), dev(ale0)
>> +mpp8 8 gpio, sd0(d1), dev(ale1)
>> +mpp9 9 gpio, sd0(d2), dev(ready0)
>> +mpp10 10 gpio, sd0(d3), dev(ad12)
>> +mpp11 11 gpio, uart1(rxd), uart0(cts), dev(ad13)
>> -+mpp12 12 gpio, uart1(txd), uart0(rts), dev(ad14)
>> ++mpp12 12 gpo, uart1(txd), uart0(rts), dev(ad14)
>> +mpp13 13 gpio, intr(out), dev(ad15)
>> +mpp14 14 gpio, i2c0(sck)
>> +mpp15 15 gpio, i2c0(sda)
>> -+mpp16 16 gpio, dev(oe)
>> -+mpp17 17 gpio, dev(clk)
>> ++mpp16 16 gpo, dev(oe)
>> ++mpp17 17 gpo, dev(clkout)
>> +mpp18 18 gpio, uart1(txd)
>> +mpp19 19 gpio, uart1(rxd), dev(rb)
>> -+mpp20 20 gpio, dev(we)
>> -+mpp21 21 gpio, dev(ad0)
>> -+mpp22 22 gpio, dev(ad1)
>> -+mpp23 23 gpio, dev(ad2)
>> -+mpp24 24 gpio, dev(ad3)
>> -+mpp25 25 gpio, dev(ad4)
>> -+mpp26 26 gpio, dev(ad5)
>> -+mpp27 27 gpio, dev(ad6)
>> -+mpp28 28 gpio, dev(ad7)
>> -+mpp29 29 gpio, dev(a0)
>> -+mpp30 30 gpio, dev(a1)
>> ++mpp20 20 gpo, dev(we0)
>> ++mpp21 21 gpo, dev(ad0)
>> ++mpp22 22 gpo, dev(ad1)
>> ++mpp23 23 gpo, dev(ad2)
>> ++mpp24 24 gpo, dev(ad3)
>> ++mpp25 25 gpo, dev(ad4)
>> ++mpp26 26 gpo, dev(ad5)
>> ++mpp27 27 gpo, dev(ad6)
>> ++mpp28 28 gpo, dev(ad7)
>> ++mpp29 29 gpo, dev(a0)
>> ++mpp30 30 gpo, dev(a1)
>> +mpp31 31 gpio, slv_smi(mdc), smi(mdc), dev(we1)
>> +mpp32 32 gpio, slv_smi(mdio), smi(mdio), dev(cs1)
>> diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-xp.c b/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
>> -index e4ea71a9d985..554eeae8cd21 100644
>> +index 63e1bd506983..61cbc138703e 100644
>> --- a/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
>> +++ b/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
>> V_MV78460 = BIT(2),
>> @@ -495,8 +457,8 @@
>> + MPP_VAR_FUNCTION(0x2, "spi0", "miso", V_98DX3236_PLUS),
>> + MPP_VAR_FUNCTION(0x4, "dev", "ad9", V_98DX3236_PLUS)),
>> + MPP_MODE(2,
>> -+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
>> -+ MPP_VAR_FUNCTION(0x2, "spi0", "csk", V_98DX3236_PLUS),
>> ++ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
>> ++ MPP_VAR_FUNCTION(0x2, "spi0", "sck", V_98DX3236_PLUS),
>> + MPP_VAR_FUNCTION(0x4, "dev", "ad10", V_98DX3236_PLUS)),
>> + MPP_MODE(3,
>> + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
>> @@ -511,7 +473,7 @@
>> + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
>> + MPP_VAR_FUNCTION(0x1, "pex", "rsto", V_98DX3236_PLUS),
>> + MPP_VAR_FUNCTION(0x2, "sd0", "cmd", V_98DX4251),
>> -+ MPP_VAR_FUNCTION(0x4, "dev", "bootcs0", V_98DX3236_PLUS)),
>> ++ MPP_VAR_FUNCTION(0x4, "dev", "bootcs", V_98DX3236_PLUS)),
>> + MPP_MODE(6,
>> + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
>> + MPP_VAR_FUNCTION(0x2, "sd0", "clk", V_98DX4251),
>> @@ -563,7 +525,8 @@
>> + MPP_VAR_FUNCTION(0x3, "uart1", "txd", V_98DX3236_PLUS)),
>> + MPP_MODE(19,
>> + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
>> -+ MPP_VAR_FUNCTION(0x3, "uart1", "rxd", V_98DX3236_PLUS)),
>> ++ MPP_VAR_FUNCTION(0x3, "uart1", "rxd", V_98DX3236_PLUS),
>> ++ MPP_VAR_FUNCTION(0x4, "dev", "rb", V_98DX3236_PLUS)),
>> + MPP_MODE(20,
>> + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
>> + MPP_VAR_FUNCTION(0x4, "dev", "we0", V_98DX3236_PLUS)),
>> @@ -630,11 +593,11 @@
>> };
>>
>> +static struct mvebu_mpp_ctrl mv98dx3236_mpp_controls[] = {
>> -+ MPP_FUNC_CTRL(0, 32, NULL, armada_xp_mpp_ctrl),
>> ++ MPP_FUNC_CTRL(0, 32, NULL, mvebu_mmio_mpp_ctrl),
>> +};
>> +
>> +static struct pinctrl_gpio_range mv98dx3236_mpp_gpio_ranges[] = {
>> -+ MPP_GPIO_RANGE(0, 0, 0, 32),
>> ++ MPP_GPIO_RANGE(0, 0, 0, 32),
>> +};
>> +
>> static int armada_xp_pinctrl_suspend(struct platform_device *pdev,
>> @@ -767,7 +731,7 @@
>> +};
>> diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
>> new file mode 100644
>> -index 000000000000..4b7b2fe3b682
>> +index 000000000000..9461128fae24
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
>> +/*
>> @@ -785,17 +749,17 @@
>> + * published by the Free Software Foundation; either version 2 of the
>> + * License, or (at your option) any later version.
>> + *
>> -+ * This file is distributed in the hope that it will be useful
>> ++ * This file is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> -+ * Or, alternatively
>> ++ * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> -+ * restriction, including without limitation the rights to use
>> ++ * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> @@ -804,11 +768,11 @@
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> -+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
>> ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
>> ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> @@ -851,9 +815,9 @@
>> + MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
>> +
>> + /*
>> -+ * 98DX3236 has 1 x1 PCIe unit Gen2.0: One unit can be
>> ++ * 98DX3236 has 1 x1 PCIe unit Gen2.0
>> + */
>> -+ pcie-controller {
>> ++ pciec: pcie-controller@82000000 {
>> + compatible = "marvell,armada-xp-pcie";
>> + status = "disabled";
>> + device_type = "pci";
>> @@ -870,7 +834,7 @@
>> + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
>> + 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */>;
>> +
>> -+ pcie@1,0 {
>> ++ pcie1: pcie@1,0 {
>> + device_type = "pci";
>> + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
>> + reg = <0x0800 0 0 0 0>;
>> @@ -967,7 +931,7 @@
>> + };
>> + };
>> +
>> -+ dfx-registers {
>> ++ dfxr: dfx-registers@ac000000 {
>> + compatible = "simple-bus";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> @@ -987,7 +951,7 @@
>> + };
>> + };
>> +
>> -+ switch {
>> ++ switch: switch@a8000000 {
>> + compatible = "simple-bus";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> @@ -1026,7 +990,7 @@
>> +};
>> diff --git a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
>> new file mode 100644
>> -index 000000000000..a9b0f47f8df9
>> +index 000000000000..e1580afdc260
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
>> +/*
>> @@ -1044,17 +1008,17 @@
>> + * published by the Free Software Foundation; either version 2 of the
>> + * License, or (at your option) any later version.
>> + *
>> -+ * This file is distributed in the hope that it will be useful
>> ++ * This file is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> -+ * Or, alternatively
>> ++ * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> -+ * restriction, including without limitation the rights to use
>> ++ * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> @@ -1063,16 +1027,16 @@
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> -+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
>> ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
>> ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> + *
>> -+ * Contains definitions specific to the 98dx3336 SoC that are not
>> ++ * Contains definitions specific to the 98dx3236 SoC that are not
>> + * common to all Armada XP SoCs.
>> + */
>> +
>> @@ -1107,7 +1071,7 @@
>> +};
>> diff --git a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
>> new file mode 100644
>> -index 000000000000..446e6e65ec59
>> +index 000000000000..4b0533a4ccb7
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
>> +/*
>> @@ -1125,17 +1089,17 @@
>> + * published by the Free Software Foundation; either version 2 of the
>> + * License, or (at your option) any later version.
>> + *
>> -+ * This file is distributed in the hope that it will be useful
>> ++ * This file is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> -+ * Or, alternatively
>> ++ * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> -+ * restriction, including without limitation the rights to use
>> ++ * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> @@ -1144,11 +1108,11 @@
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> -+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
>> ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
>> ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> @@ -1213,15 +1177,15 @@
>> diff --git a/arch/arm/boot/dts/db-dxbc2.dts b/arch/arm/boot/dts/db-dxbc2.dts
>> new file mode 100644
>> -index 000000000000..f56786cea5f8
>> +index 000000000000..a8130805074e
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/db-dxbc2.dts
>> +/*
>> @@ -1241,17 +1205,17 @@
>> + * published by the Free Software Foundation; either version 2 of the
>> + * License, or (at your option) any later version.
>> + *
>> -+ * This file is distributed in the hope that it will be useful
>> ++ * This file is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> -+ * Or, alternatively
>> ++ * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> -+ * restriction, including without limitation the rights to use
>> ++ * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> @@ -1260,11 +1224,11 @@
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> -+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
>> ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
>> ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> @@ -1295,66 +1259,58 @@
>> + reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
>> + };
>> +
>> -+ soc {
>> -+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
>> -+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
>> -+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
>> -+ MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
>> -+ MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
>> ++};
>> +
>> -+ devbus-bootcs {
>> -+ status = "okay";
>> ++&devbus_bootcs {
>> ++ status = "okay";
>> +
>> -+ /* Device Bus parameters are required */
>> ++ /* Device Bus parameters are required */
>> +
>> -+ /* Read parameters */
>> -+ devbus,bus-width = <16>;
>> -+ devbus,turn-off-ps = <60000>;
>> -+ devbus,badr-skew-ps = <0>;
>> -+ devbus,acc-first-ps = <124000>;
>> -+ devbus,acc-next-ps = <248000>;
>> -+ devbus,rd-setup-ps = <0>;
>> -+ devbus,rd-hold-ps = <0>;
>> -+
>> -+ /* Write parameters */
>> -+ devbus,sync-enable = <0>;
>> -+ devbus,wr-high-ps = <60000>;
>> -+ devbus,wr-low-ps = <60000>;
>> -+ devbus,ale-wr-ps = <60000>;
>> -+ };
>> ++ /* Read parameters */
>> ++ devbus,bus-width = <16>;
>> ++ devbus,turn-off-ps = <60000>;
>> ++ devbus,badr-skew-ps = <0>;
>> ++ devbus,acc-first-ps = <124000>;
>> ++ devbus,acc-next-ps = <248000>;
>> ++ devbus,rd-setup-ps = <0>;
>> ++ devbus,rd-hold-ps = <0>;
>> ++
>> ++ /* Write parameters */
>> ++ devbus,sync-enable = <0>;
>> ++ devbus,wr-high-ps = <60000>;
>> ++ devbus,wr-low-ps = <60000>;
>> ++ devbus,ale-wr-ps = <60000>;
>> ++};
>> +
>> -+ internal-regs {
>> -+ serial@12000 {
>> -+ status = "okay";
>> -+ };
>> -+ serial@12100 {
>> -+ status = "okay";
>> -+ };
>> ++&i2c0 {
>> ++ clock-frequency = <100000>;
>> ++ status = "okay";
>> ++};
>> +
>> -+ i2c@11000 {
>> -+ clock-frequency = <100000>;
>> -+ status = "okay";
>> -+ };
>> ++&uart0 {
>> ++ status = "okay";
>> ++};
>> +
>> -+ mvsdio@d4000 {
>> -+ pinctrl-0 = <&sdio_pins>;
>> -+ pinctrl-names = "default";
>> -+ status = "okay";
>> -+ /* No CD or WP GPIOs */
>> -+ broken-cd;
>> -+ };
>> ++&uart1 {
>> ++ status = "okay";
>> ++};
>> +
>> -+ nand@d0000 {
>> -+ status = "okay";
>> -+ num-cs = <1>;
>> -+ marvell,nand-keep-config;
>> -+ marvell,nand-enable-arbiter;
>> -+ nand-on-flash-bbt;
>> -+ nand-ecc-strength = <4>;
>> -+ nand-ecc-step-size = <512>;
>> -+ };
>> -+ };
>> -+ };
>> ++&nand {
>> ++ status = "okay";
>> ++ num-cs = <1>;
>> ++ marvell,nand-keep-config;
>> ++ marvell,nand-enable-arbiter;
>> ++ nand-on-flash-bbt;
>> ++ nand-ecc-strength = <4>;
>> ++ nand-ecc-step-size = <512>;
>> ++};
>> ++
>> ++&sdio {
>> ++ pinctrl-0 = <&sdio_pins>;
>> ++ pinctrl-names = "default";
>> ++ status = "okay";
>> ++ /* No CD or WP GPIOs */
>> ++ broken-cd;
>> +};
>> +
>> +&spi0 {
>> @@ -1385,7 +1341,7 @@
>> +};
>> diff --git a/arch/arm/boot/dts/db-xc3-24g4xg.dts b/arch/arm/boot/dts/db-xc3-24g4xg.dts
>> new file mode 100644
>> -index 000000000000..5eb89ffb9a7d
>> +index 000000000000..4e07cb6ed800
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/db-xc3-24g4xg.dts
>> +/*
>> @@ -1405,17 +1361,17 @@
>> + * published by the Free Software Foundation; either version 2 of the
>> + * License, or (at your option) any later version.
>> + *
>> -+ * This file is distributed in the hope that it will be useful
>> ++ * This file is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> -+ * Or, alternatively
>> ++ * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> -+ * restriction, including without limitation the rights to use
>> ++ * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> @@ -1424,11 +1380,11 @@
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> -+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
>> ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
>> ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> @@ -1458,63 +1414,50 @@
>> + device_type = "memory";
>> + reg = <0 0x00000000 0 0x40000000>; /* 1 GB */
>> + };
>> ++};
>> +
>> -+ soc {
>> -+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
>> -+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
>> -+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
>> -+ MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
>> -+ MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
>> -+
>> -+ devbus-bootcs {
>> -+ status = "okay";
>> ++&devbus_bootcs {
>> ++ status = "okay";
>> +
>> -+ /* Device Bus parameters are required */
>> ++ /* Device Bus parameters are required */
>> +
>> -+ /* Read parameters */
>> -+ devbus,bus-width = <16>;
>> -+ devbus,turn-off-ps = <60000>;
>> -+ devbus,badr-skew-ps = <0>;
>> -+ devbus,acc-first-ps = <124000>;
>> -+ devbus,acc-next-ps = <248000>;
>> -+ devbus,rd-setup-ps = <0>;
>> -+ devbus,rd-hold-ps = <0>;
>> -+
>> -+ /* Write parameters */
>> -+ devbus,sync-enable = <0>;
>> -+ devbus,wr-high-ps = <60000>;
>> -+ devbus,wr-low-ps = <60000>;
>> -+ devbus,ale-wr-ps = <60000>;
>> -+ };
>> ++ /* Read parameters */
>> ++ devbus,bus-width = <16>;
>> ++ devbus,turn-off-ps = <60000>;
>> ++ devbus,badr-skew-ps = <0>;
>> ++ devbus,acc-first-ps = <124000>;
>> ++ devbus,acc-next-ps = <248000>;
>> ++ devbus,rd-setup-ps = <0>;
>> ++ devbus,rd-hold-ps = <0>;
>> ++
>> ++ /* Write parameters */
>> ++ devbus,sync-enable = <0>;
>> ++ devbus,wr-high-ps = <60000>;
>> ++ devbus,wr-low-ps = <60000>;
>> ++ devbus,ale-wr-ps = <60000>;
>> ++};
>> +
>> -+ internal-regs {
>> -+ serial@12000 {
>> -+ status = "okay";
>> -+ };
>> -+ serial@12100 {
>> -+ status = "okay";
>> -+ };
>> ++&uart0 {
>> ++ status = "okay";
>> ++};
>> +
>> -+ i2c@11000 {
>> -+ clock-frequency = <100000>;
>> -+ status = "okay";
>> -+ };
>> ++&uart1 {
>> ++ status = "okay";
>> ++};
>> +
>> -+ mvsdio@d4000 {
>> -+ status = "disabled";
>> -+ };
>> ++&i2c0 {
>> ++ clock-frequency = <100000>;
>> ++ status = "okay";
>> ++};
>> +
>> -+ nand@d0000 {
>> -+ status = "okay";
>> -+ num-cs = <1>;
>> -+ marvell,nand-keep-config;
>> -+ marvell,nand-enable-arbiter;
>> -+ nand-on-flash-bbt;
>> -+ nand-ecc-strength = <4>;
>> -+ nand-ecc-step-size = <512>;
>> -+ };
>> -+ };
>> -+ };
>> ++&nand {
>> ++ status = "okay";
>> ++ num-cs = <1>;
>> ++ marvell,nand-keep-config;
>> ++ marvell,nand-enable-arbiter;
>> ++ nand-on-flash-bbt;
>> ++ nand-ecc-strength = <4>;
>> ++ nand-ecc-step-size = <512>;
>> +};
>> +
>> +&spi0 {
>>
>> --
>> 2.11.0.24.ge6920cf
>>
>
> --
> Gregory Clement, Free Electrons
> Kernel, drivers, real-time and embedded Linux
> development, consulting, training and support.
> http://free-electrons.com
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
WARNING: multiple messages have this Message-ID (diff)
From: Gregory CLEMENT <gregory.clement@free-electrons.com>
To: Stephen Boyd <sboyd@codeaurora.org>
Cc: Linus Walleij <linus.walleij@linaro.org>,
Chris Packham <chris.packham@alliedtelesis.co.nz>,
Mark Rutland <mark.rutland@arm.com>, Andrew Lunn <andrew@lunn.ch>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Michael Turquette <mturquette@baylibre.com>,
Laxman Dewangan <ldewangan@nvidia.com>,
linux-clk@vger.kernel.org,
Florian Fainelli <f.fainelli@gmail.com>,
Juri Lelli <juri.lelli@arm.com>,
linux@armlinux.org.uk, Thierry Reding <treding@nvidia.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
devicetree@vger.kernel.org, Jason Cooper <jason@lakedaemon.net>,
Arnd Bergmann <arnd@arndb.de>,
linux-gpio@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
Chris Brand <chris.brand@broadcom.com>,
linux-arm-kernel@lists.infradead.org,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
Kalyan Kinthada <kalyan.kinthada@alliedtelesis.co.nz>,
linux-kernel@vger.kernel.org, Sudeep Holla <sudeep.holla@arm.com>
Subject: Re: [PATCHv5 0/5] Support for Marvell switches with integrated CPUs
Date: Fri, 27 Jan 2017 17:49:27 +0100 [thread overview]
Message-ID: <87o9yswiqw.fsf@free-electrons.com> (raw)
In-Reply-To: <87wpdgwj72.fsf@free-electrons.com> (Gregory CLEMENT's message of "Fri, 27 Jan 2017 17:39:45 +0100")
Hi,
On ven., janv. 27 2017, Gregory CLEMENT <gregory.clement@free-electrons.com> wrote:
> Hi all,
>
> On ven., janv. 27 2017, Chris Packham <chris.packham@alliedtelesis.co.nz> wrote:
>
>> The 98DX3236, 98DX3336 and 98DX4251 are a set of switch ASICs with
>> integrated CPUs. They CPU block is common within these product lines and
>> (as far as I can tell/have been told) is based on the Armada XP. There
>> are a few differences due to the fact they have to squeeze the CPU into
>> the same package as the switch.
>>
>> I've rebased this series against linux-pinctrl/devel to get access to
>> mvebu_mmio_mpp_ctrl. Everything else still applies cleanly to
>> v4.10.0-rc5.
>
> Just to let you know that I plan to apply the 3 arm patch once Chris
> will have sent the new series with the minor fixes I asked on patch 3.
I meant patch 2!
And now patch 5 too :)
Gregory
> I already applied them in the for-next branch to benefit of some build
> test coverage.
>
> Stephen,
>
> you gave your Acked-by on the first patch, but don't you plan to apply
> it on the clk branch?
>
> If you really want I can apply on mvebu but there is no build
> dependencies, so the order the patches will be merged is not important.
>
> Linus,
>
> I expect you will apply the pinctrl patch on your tree as it depend of
> code already there.
>
> Thanks,
>
> Gregory
>
>>
>> Chris Packham (4):
>> clk: mvebu: support for 98DX3236 SoC
>> Changes in v2:
>> - Update devicetree binding documentation for new compatible string
>> Changes in v3:
>> - Add 98dx3236 support to mvebu/clk-corediv.c rather than creating a new
>> driver.
>> - Document mv98dx3236-corediv-clock binding
>> Changes in v4:
>> - None
>> Changes in v5:
>> - Collect ack from Rob
>> - Remove explicit initialisation of fields to 0 in mv98dx3236_coreclks
>> - Register dummy clock provider for marvell,mv98dx3236-cpu-clock
>> arm: mvebu: support for SMP on 98DX3336 SoC
>> Changes in v2:
>> - Document new enable-method value
>> - Correct some references from 98DX4521 to 98DX3236
>> Changes in v3:
>> - Simplify mv98dx3236_resume_init by using of_io_request_and_map()
>> Changes in v4:
>> - integrate changes into platsmp.c instead of new init call
>> - avoid duplicated code.
>> - fix error return
>> - Collect ack from Rob
>> Changes in v5:
>> - Remove useless casts (thanks to Stephen Boyd)
>> arm: mvebu: Add device tree for 98DX3236 SoCs
>> Changes in v2:
>> - Update devicetree binding documentation to reflect that 98DX3336 and
>> 984251 are supersets of 98DX3236.
>> - disable crypto block
>> - disable sdio for 98DX3236, enable for 98DX4251
>> Changes in v3:
>> - fix typo 4521 -> 4251
>> - document prestera bindings
>> - rework corediv-clock binding
>> - add label to packet processor node
>> - add new compatible string for DFX server
>> Changes in v4:
>> - Collect ack from Rob
>> Changes in v5:
>> - Fixup license text. Add labels to nodes.
>> arm: mvebu: Add device tree for db-dxbc2 and db-xc3-24g4xg boards
>> Changes in v5:
>> - update license text
>> - use node labels
>>
>> Kalyan Kinthada (1):
>> pinctrl: mvebu: pinctrl driver for 98DX3236 SoC
>> Changes in v2:
>> - include sdio support for the 98DX4251
>> Changes in v3:
>> - None
>> Changes in v4:
>> - Correct some discrepencies between binding and driver.
>> - Collect acks from Rob and Sebastian
>> Changes in v5:
>> - Update bindings to reflect "gpo" pins
>> - Use mvebu_mmio_mpp_ctrl instead of armada_xp_mpp_ctrl (note this is reliant
>> on changes queued in linux-pinctrl)
>>
>> Documentation/devicetree/bindings/arm/cpus.txt | 1 +
>> .../bindings/arm/marvell/98dx3236-resume-ctrl.txt | 16 ++
>> .../devicetree/bindings/arm/marvell/98dx3236.txt | 23 ++
>> .../bindings/clock/mvebu-corediv-clock.txt | 1 +
>> .../devicetree/bindings/clock/mvebu-cpu-clock.txt | 1 +
>> .../devicetree/bindings/net/marvell,prestera.txt | 50 ++++
>> .../pinctrl/marvell,armada-98dx3236-pinctrl.txt | 46 ++++
>> arch/arm/boot/dts/armada-xp-98dx3236.dtsi | 254 +++++++++++++++++++++
>> arch/arm/boot/dts/armada-xp-98dx3336.dtsi | 76 ++++++
>> arch/arm/boot/dts/armada-xp-98dx4251.dtsi | 90 ++++++++
>> arch/arm/boot/dts/db-dxbc2.dts | 151 ++++++++++++
>> arch/arm/boot/dts/db-xc3-24g4xg.dts | 142 ++++++++++++
>> arch/arm/mach-mvebu/platsmp.c | 86 +++++++
>> drivers/clk/mvebu/armada-xp.c | 39 ++++
>> drivers/clk/mvebu/clk-corediv.c | 23 ++
>> drivers/clk/mvebu/clk-cpu.c | 8 +
>> drivers/pinctrl/mvebu/pinctrl-armada-xp.c | 156 +++++++++++++
>> 17 files changed, 1163 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
>> create mode 100644 Documentation/devicetree/bindings/arm/marvell/98dx3236.txt
>> create mode 100644 Documentation/devicetree/bindings/net/marvell,prestera.txt
>> create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
>> create mode 100644 arch/arm/boot/dts/armada-xp-98dx3236.dtsi
>> create mode 100644 arch/arm/boot/dts/armada-xp-98dx3336.dtsi
>> create mode 100644 arch/arm/boot/dts/armada-xp-98dx4251.dtsi
>> create mode 100644 arch/arm/boot/dts/db-dxbc2.dts
>> create mode 100644 arch/arm/boot/dts/db-xc3-24g4xg.dts
>>
>> interdiff to v4:
>>
>> diff --git a/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt
>> index 520562a7dc2a..c7b4e3a6b2c6 100644
>> @@ -85,7 +86,7 @@
>> by address and length of the PMU DFS registers
>> - #clock-cells : should be set to 1.
>> diff --git a/drivers/clk/mvebu/armada-xp.c b/drivers/clk/mvebu/armada-xp.c
>> -index b3094315a3c0..0413bf8284e0 100644
>> +index b3094315a3c0..890a863ae0d0 100644
>> --- a/drivers/clk/mvebu/armada-xp.c
>> +++ b/drivers/clk/mvebu/armada-xp.c
>> return 250000000;
>> @@ -118,9 +119,6 @@
>> +static const struct coreclk_soc_desc mv98dx3236_coreclks = {
>> + .get_tclk_freq = mv98dx3236_get_tclk_freq,
>> + .get_cpu_freq = mv98dx3236_get_cpu_freq,
>> -+ .get_clk_ratio = NULL,
>> -+ .ratios = NULL,
>> -+ .num_ratios = 0,
>> +};
>> +
>> /*
>> @@ -200,53 +198,16 @@
>> +CLK_OF_DECLARE(mv98dx3236_corediv_clk, "marvell,mv98dx3236-corediv-clock",
>> + mv98dx3236_corediv_clk_init);
>> diff --git a/drivers/clk/mvebu/clk-cpu.c b/drivers/clk/mvebu/clk-cpu.c
>> -index 5837eb8a212f..3b8f0e14fa01 100644
>> +index 5837eb8a212f..044892b6534d 100644
>> --- a/drivers/clk/mvebu/clk-cpu.c
>> +++ b/drivers/clk/mvebu/clk-cpu.c
>> - .set_rate = clk_cpu_set_rate,
>> - };
>> -
>> --static void __init of_cpu_clk_setup(struct device_node *node)
>> -+/* Add parameter to allow this to support different clock operations. */
>> -+static void __init _of_cpu_clk_setup(struct device_node *node,
>> -+ const struct clk_ops *cpu_clk_ops)
>> - {
>> - struct cpu_clk *cpuclk;
>> - void __iomem *clock_complex_base = of_iomap(node, 0);
>> - cpuclk[cpu].hw.init = &init;
>>
>> - init.name = cpuclk[cpu].clk_name;
>> -- init.ops = &cpu_ops;
>> -+ init.ops = cpu_clk_ops;
>> - init.flags = 0;
>> - init.parent_names = &cpuclk[cpu].parent_name;
>> - init.num_parents = 1;
>> - iounmap(clock_complex_base);
>> - }
>> -
>> -+/* Use this function to call the generic setup with the correct
>> -+ * clock operation
>> -+ */
>> -+static void __init of_cpu_clk_setup(struct device_node *node)
>> -+{
>> -+ _of_cpu_clk_setup(node, &cpu_ops);
>> -+}
>> -+
>> CLK_OF_DECLARE(armada_xp_cpu_clock, "marvell,armada-xp-cpu-clock",
>> of_cpu_clk_setup);
>> +
>> -+/* Define the clock and operations for the mv98dx3236 - it cannot perform
>> -+ * any operations.
>> -+ */
>> -+static const struct clk_ops mv98dx3236_cpu_ops = {
>> -+ .recalc_rate = NULL,
>> -+ .round_rate = NULL,
>> -+ .set_rate = NULL,
>> -+};
>> -+
>> +static void __init of_mv98dx3236_cpu_clk_setup(struct device_node *node)
>> +{
>> -+ _of_cpu_clk_setup(node, &mv98dx3236_cpu_ops);
>> ++ of_clk_add_provider(node, of_clk_src_simple_get, NULL);
>> +}
>> +
>> +CLK_OF_DECLARE(mv98dx3236_cpu_clock, "marvell,mv98dx3236-cpu-clock",
>> @@ -285,7 +247,7 @@
>> "qcom,gcc-msm8660"
>> diff --git
> a/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
> b/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
>> new file mode 100644
>> -index 000000000000..8082ba872edd
>> +index 000000000000..26eb9d3aa630
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
>> +Resume Control
>> @@ -304,10 +266,8 @@
>> + compatible = "marvell,98dx3336-resume-ctrl";
>> + reg = <0x20980 0x10>;
>> +};
>> -+
>> -+
>> diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c
>> -index 46c742d3bd41..59be3ca0464f 100644
>> +index 46c742d3bd41..a5b464497e1a 100644
>> --- a/arch/arm/mach-mvebu/platsmp.c
>> +++ b/arch/arm/mach-mvebu/platsmp.c
>>
>> @@ -327,7 +287,7 @@
>> +static const struct of_device_id of_mv98dx3236_resume_table[] = {
>> + {
>> + .compatible = "marvell,98dx3336-resume-ctrl",
>> -+ .data = (void *)&mv98dx3336_resume_controller,
>> ++ .data = &mv98dx3336_resume_controller,
>> + },
>> + { /* end of list */ },
>> +};
>> @@ -337,7 +297,7 @@
>> + const struct of_device_id *match;
>> + struct device_node *np;
>> + void __iomem *base;
>> -+ struct resume_controller *rc;
>> ++ const struct resume_controller *rc;
>> +
>> + WARN_ON(hw_cpu != 1);
>> +
>> @@ -347,7 +307,7 @@
>> + return -ENODEV;
>> +
>> + base = of_io_request_and_map(np, 0, of_node_full_name(np));
>> -+ rc = (struct resume_controller *)match->data;
>> ++ rc = match->data;
>> + of_node_put(np);
>> + if (IS_ERR(base))
>> + return PTR_ERR(base);
>> @@ -411,15 +371,17 @@
>> diff --git
> a/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
> b/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
>> new file mode 100644
>> -index 000000000000..d4e6ecdfc853
>> +index 000000000000..97aef67ee769
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
>> +* Marvell 98dx3236 pinctrl driver for mpp
>> @@ -435,41 +397,41 @@
>> +
>> +name pins functions
>> +================================================================================
>> -+mpp0 0 gpio, spi0(mosi), dev(ad8)
>> ++mpp0 0 gpo, spi0(mosi), dev(ad8)
>> +mpp1 1 gpio, spi0(miso), dev(ad9)
>> -+mpp2 2 gpio, spi0(sck), dev(ad10)
>> ++mpp2 2 gpo, spi0(sck), dev(ad10)
>> +mpp3 3 gpio, spi0(cs0), dev(ad11)
>> +mpp4 4 gpio, spi0(cs1), smi(mdc), dev(cs0)
>> +mpp5 5 gpio, pex(rsto), sd0(cmd), dev(bootcs)
>> -+mpp6 6 gpio, sd0(clk), dev(a2)
>> ++mpp6 6 gpo, sd0(clk), dev(a2)
>> +mpp7 7 gpio, sd0(d0), dev(ale0)
>> +mpp8 8 gpio, sd0(d1), dev(ale1)
>> +mpp9 9 gpio, sd0(d2), dev(ready0)
>> +mpp10 10 gpio, sd0(d3), dev(ad12)
>> +mpp11 11 gpio, uart1(rxd), uart0(cts), dev(ad13)
>> -+mpp12 12 gpio, uart1(txd), uart0(rts), dev(ad14)
>> ++mpp12 12 gpo, uart1(txd), uart0(rts), dev(ad14)
>> +mpp13 13 gpio, intr(out), dev(ad15)
>> +mpp14 14 gpio, i2c0(sck)
>> +mpp15 15 gpio, i2c0(sda)
>> -+mpp16 16 gpio, dev(oe)
>> -+mpp17 17 gpio, dev(clk)
>> ++mpp16 16 gpo, dev(oe)
>> ++mpp17 17 gpo, dev(clkout)
>> +mpp18 18 gpio, uart1(txd)
>> +mpp19 19 gpio, uart1(rxd), dev(rb)
>> -+mpp20 20 gpio, dev(we)
>> -+mpp21 21 gpio, dev(ad0)
>> -+mpp22 22 gpio, dev(ad1)
>> -+mpp23 23 gpio, dev(ad2)
>> -+mpp24 24 gpio, dev(ad3)
>> -+mpp25 25 gpio, dev(ad4)
>> -+mpp26 26 gpio, dev(ad5)
>> -+mpp27 27 gpio, dev(ad6)
>> -+mpp28 28 gpio, dev(ad7)
>> -+mpp29 29 gpio, dev(a0)
>> -+mpp30 30 gpio, dev(a1)
>> ++mpp20 20 gpo, dev(we0)
>> ++mpp21 21 gpo, dev(ad0)
>> ++mpp22 22 gpo, dev(ad1)
>> ++mpp23 23 gpo, dev(ad2)
>> ++mpp24 24 gpo, dev(ad3)
>> ++mpp25 25 gpo, dev(ad4)
>> ++mpp26 26 gpo, dev(ad5)
>> ++mpp27 27 gpo, dev(ad6)
>> ++mpp28 28 gpo, dev(ad7)
>> ++mpp29 29 gpo, dev(a0)
>> ++mpp30 30 gpo, dev(a1)
>> +mpp31 31 gpio, slv_smi(mdc), smi(mdc), dev(we1)
>> +mpp32 32 gpio, slv_smi(mdio), smi(mdio), dev(cs1)
>> diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-xp.c b/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
>> -index e4ea71a9d985..554eeae8cd21 100644
>> +index 63e1bd506983..61cbc138703e 100644
>> --- a/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
>> +++ b/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
>> V_MV78460 = BIT(2),
>> @@ -495,8 +457,8 @@
>> + MPP_VAR_FUNCTION(0x2, "spi0", "miso", V_98DX3236_PLUS),
>> + MPP_VAR_FUNCTION(0x4, "dev", "ad9", V_98DX3236_PLUS)),
>> + MPP_MODE(2,
>> -+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
>> -+ MPP_VAR_FUNCTION(0x2, "spi0", "csk", V_98DX3236_PLUS),
>> ++ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
>> ++ MPP_VAR_FUNCTION(0x2, "spi0", "sck", V_98DX3236_PLUS),
>> + MPP_VAR_FUNCTION(0x4, "dev", "ad10", V_98DX3236_PLUS)),
>> + MPP_MODE(3,
>> + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
>> @@ -511,7 +473,7 @@
>> + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
>> + MPP_VAR_FUNCTION(0x1, "pex", "rsto", V_98DX3236_PLUS),
>> + MPP_VAR_FUNCTION(0x2, "sd0", "cmd", V_98DX4251),
>> -+ MPP_VAR_FUNCTION(0x4, "dev", "bootcs0", V_98DX3236_PLUS)),
>> ++ MPP_VAR_FUNCTION(0x4, "dev", "bootcs", V_98DX3236_PLUS)),
>> + MPP_MODE(6,
>> + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
>> + MPP_VAR_FUNCTION(0x2, "sd0", "clk", V_98DX4251),
>> @@ -563,7 +525,8 @@
>> + MPP_VAR_FUNCTION(0x3, "uart1", "txd", V_98DX3236_PLUS)),
>> + MPP_MODE(19,
>> + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
>> -+ MPP_VAR_FUNCTION(0x3, "uart1", "rxd", V_98DX3236_PLUS)),
>> ++ MPP_VAR_FUNCTION(0x3, "uart1", "rxd", V_98DX3236_PLUS),
>> ++ MPP_VAR_FUNCTION(0x4, "dev", "rb", V_98DX3236_PLUS)),
>> + MPP_MODE(20,
>> + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
>> + MPP_VAR_FUNCTION(0x4, "dev", "we0", V_98DX3236_PLUS)),
>> @@ -630,11 +593,11 @@
>> };
>>
>> +static struct mvebu_mpp_ctrl mv98dx3236_mpp_controls[] = {
>> -+ MPP_FUNC_CTRL(0, 32, NULL, armada_xp_mpp_ctrl),
>> ++ MPP_FUNC_CTRL(0, 32, NULL, mvebu_mmio_mpp_ctrl),
>> +};
>> +
>> +static struct pinctrl_gpio_range mv98dx3236_mpp_gpio_ranges[] = {
>> -+ MPP_GPIO_RANGE(0, 0, 0, 32),
>> ++ MPP_GPIO_RANGE(0, 0, 0, 32),
>> +};
>> +
>> static int armada_xp_pinctrl_suspend(struct platform_device *pdev,
>> @@ -767,7 +731,7 @@
>> +};
>> diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
>> new file mode 100644
>> -index 000000000000..4b7b2fe3b682
>> +index 000000000000..9461128fae24
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
>> +/*
>> @@ -785,17 +749,17 @@
>> + * published by the Free Software Foundation; either version 2 of the
>> + * License, or (at your option) any later version.
>> + *
>> -+ * This file is distributed in the hope that it will be useful
>> ++ * This file is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> -+ * Or, alternatively
>> ++ * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> -+ * restriction, including without limitation the rights to use
>> ++ * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> @@ -804,11 +768,11 @@
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> -+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
>> ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
>> ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> @@ -851,9 +815,9 @@
>> + MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
>> +
>> + /*
>> -+ * 98DX3236 has 1 x1 PCIe unit Gen2.0: One unit can be
>> ++ * 98DX3236 has 1 x1 PCIe unit Gen2.0
>> + */
>> -+ pcie-controller {
>> ++ pciec: pcie-controller@82000000 {
>> + compatible = "marvell,armada-xp-pcie";
>> + status = "disabled";
>> + device_type = "pci";
>> @@ -870,7 +834,7 @@
>> + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
>> + 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */>;
>> +
>> -+ pcie@1,0 {
>> ++ pcie1: pcie@1,0 {
>> + device_type = "pci";
>> + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
>> + reg = <0x0800 0 0 0 0>;
>> @@ -967,7 +931,7 @@
>> + };
>> + };
>> +
>> -+ dfx-registers {
>> ++ dfxr: dfx-registers@ac000000 {
>> + compatible = "simple-bus";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> @@ -987,7 +951,7 @@
>> + };
>> + };
>> +
>> -+ switch {
>> ++ switch: switch@a8000000 {
>> + compatible = "simple-bus";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> @@ -1026,7 +990,7 @@
>> +};
>> diff --git a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
>> new file mode 100644
>> -index 000000000000..a9b0f47f8df9
>> +index 000000000000..e1580afdc260
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
>> +/*
>> @@ -1044,17 +1008,17 @@
>> + * published by the Free Software Foundation; either version 2 of the
>> + * License, or (at your option) any later version.
>> + *
>> -+ * This file is distributed in the hope that it will be useful
>> ++ * This file is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> -+ * Or, alternatively
>> ++ * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> -+ * restriction, including without limitation the rights to use
>> ++ * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> @@ -1063,16 +1027,16 @@
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> -+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
>> ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
>> ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> + *
>> -+ * Contains definitions specific to the 98dx3336 SoC that are not
>> ++ * Contains definitions specific to the 98dx3236 SoC that are not
>> + * common to all Armada XP SoCs.
>> + */
>> +
>> @@ -1107,7 +1071,7 @@
>> +};
>> diff --git a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
>> new file mode 100644
>> -index 000000000000..446e6e65ec59
>> +index 000000000000..4b0533a4ccb7
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
>> +/*
>> @@ -1125,17 +1089,17 @@
>> + * published by the Free Software Foundation; either version 2 of the
>> + * License, or (at your option) any later version.
>> + *
>> -+ * This file is distributed in the hope that it will be useful
>> ++ * This file is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> -+ * Or, alternatively
>> ++ * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> -+ * restriction, including without limitation the rights to use
>> ++ * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> @@ -1144,11 +1108,11 @@
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> -+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
>> ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
>> ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> @@ -1213,15 +1177,15 @@
>> diff --git a/arch/arm/boot/dts/db-dxbc2.dts b/arch/arm/boot/dts/db-dxbc2.dts
>> new file mode 100644
>> -index 000000000000..f56786cea5f8
>> +index 000000000000..a8130805074e
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/db-dxbc2.dts
>> +/*
>> @@ -1241,17 +1205,17 @@
>> + * published by the Free Software Foundation; either version 2 of the
>> + * License, or (at your option) any later version.
>> + *
>> -+ * This file is distributed in the hope that it will be useful
>> ++ * This file is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> -+ * Or, alternatively
>> ++ * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> -+ * restriction, including without limitation the rights to use
>> ++ * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> @@ -1260,11 +1224,11 @@
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> -+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
>> ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
>> ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> @@ -1295,66 +1259,58 @@
>> + reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
>> + };
>> +
>> -+ soc {
>> -+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
>> -+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
>> -+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
>> -+ MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
>> -+ MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
>> ++};
>> +
>> -+ devbus-bootcs {
>> -+ status = "okay";
>> ++&devbus_bootcs {
>> ++ status = "okay";
>> +
>> -+ /* Device Bus parameters are required */
>> ++ /* Device Bus parameters are required */
>> +
>> -+ /* Read parameters */
>> -+ devbus,bus-width = <16>;
>> -+ devbus,turn-off-ps = <60000>;
>> -+ devbus,badr-skew-ps = <0>;
>> -+ devbus,acc-first-ps = <124000>;
>> -+ devbus,acc-next-ps = <248000>;
>> -+ devbus,rd-setup-ps = <0>;
>> -+ devbus,rd-hold-ps = <0>;
>> -+
>> -+ /* Write parameters */
>> -+ devbus,sync-enable = <0>;
>> -+ devbus,wr-high-ps = <60000>;
>> -+ devbus,wr-low-ps = <60000>;
>> -+ devbus,ale-wr-ps = <60000>;
>> -+ };
>> ++ /* Read parameters */
>> ++ devbus,bus-width = <16>;
>> ++ devbus,turn-off-ps = <60000>;
>> ++ devbus,badr-skew-ps = <0>;
>> ++ devbus,acc-first-ps = <124000>;
>> ++ devbus,acc-next-ps = <248000>;
>> ++ devbus,rd-setup-ps = <0>;
>> ++ devbus,rd-hold-ps = <0>;
>> ++
>> ++ /* Write parameters */
>> ++ devbus,sync-enable = <0>;
>> ++ devbus,wr-high-ps = <60000>;
>> ++ devbus,wr-low-ps = <60000>;
>> ++ devbus,ale-wr-ps = <60000>;
>> ++};
>> +
>> -+ internal-regs {
>> -+ serial@12000 {
>> -+ status = "okay";
>> -+ };
>> -+ serial@12100 {
>> -+ status = "okay";
>> -+ };
>> ++&i2c0 {
>> ++ clock-frequency = <100000>;
>> ++ status = "okay";
>> ++};
>> +
>> -+ i2c@11000 {
>> -+ clock-frequency = <100000>;
>> -+ status = "okay";
>> -+ };
>> ++&uart0 {
>> ++ status = "okay";
>> ++};
>> +
>> -+ mvsdio@d4000 {
>> -+ pinctrl-0 = <&sdio_pins>;
>> -+ pinctrl-names = "default";
>> -+ status = "okay";
>> -+ /* No CD or WP GPIOs */
>> -+ broken-cd;
>> -+ };
>> ++&uart1 {
>> ++ status = "okay";
>> ++};
>> +
>> -+ nand@d0000 {
>> -+ status = "okay";
>> -+ num-cs = <1>;
>> -+ marvell,nand-keep-config;
>> -+ marvell,nand-enable-arbiter;
>> -+ nand-on-flash-bbt;
>> -+ nand-ecc-strength = <4>;
>> -+ nand-ecc-step-size = <512>;
>> -+ };
>> -+ };
>> -+ };
>> ++&nand {
>> ++ status = "okay";
>> ++ num-cs = <1>;
>> ++ marvell,nand-keep-config;
>> ++ marvell,nand-enable-arbiter;
>> ++ nand-on-flash-bbt;
>> ++ nand-ecc-strength = <4>;
>> ++ nand-ecc-step-size = <512>;
>> ++};
>> ++
>> ++&sdio {
>> ++ pinctrl-0 = <&sdio_pins>;
>> ++ pinctrl-names = "default";
>> ++ status = "okay";
>> ++ /* No CD or WP GPIOs */
>> ++ broken-cd;
>> +};
>> +
>> +&spi0 {
>> @@ -1385,7 +1341,7 @@
>> +};
>> diff --git a/arch/arm/boot/dts/db-xc3-24g4xg.dts b/arch/arm/boot/dts/db-xc3-24g4xg.dts
>> new file mode 100644
>> -index 000000000000..5eb89ffb9a7d
>> +index 000000000000..4e07cb6ed800
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/db-xc3-24g4xg.dts
>> +/*
>> @@ -1405,17 +1361,17 @@
>> + * published by the Free Software Foundation; either version 2 of the
>> + * License, or (at your option) any later version.
>> + *
>> -+ * This file is distributed in the hope that it will be useful
>> ++ * This file is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> -+ * Or, alternatively
>> ++ * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> -+ * restriction, including without limitation the rights to use
>> ++ * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> @@ -1424,11 +1380,11 @@
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> -+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
>> ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
>> ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> @@ -1458,63 +1414,50 @@
>> + device_type = "memory";
>> + reg = <0 0x00000000 0 0x40000000>; /* 1 GB */
>> + };
>> ++};
>> +
>> -+ soc {
>> -+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
>> -+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
>> -+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
>> -+ MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
>> -+ MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
>> -+
>> -+ devbus-bootcs {
>> -+ status = "okay";
>> ++&devbus_bootcs {
>> ++ status = "okay";
>> +
>> -+ /* Device Bus parameters are required */
>> ++ /* Device Bus parameters are required */
>> +
>> -+ /* Read parameters */
>> -+ devbus,bus-width = <16>;
>> -+ devbus,turn-off-ps = <60000>;
>> -+ devbus,badr-skew-ps = <0>;
>> -+ devbus,acc-first-ps = <124000>;
>> -+ devbus,acc-next-ps = <248000>;
>> -+ devbus,rd-setup-ps = <0>;
>> -+ devbus,rd-hold-ps = <0>;
>> -+
>> -+ /* Write parameters */
>> -+ devbus,sync-enable = <0>;
>> -+ devbus,wr-high-ps = <60000>;
>> -+ devbus,wr-low-ps = <60000>;
>> -+ devbus,ale-wr-ps = <60000>;
>> -+ };
>> ++ /* Read parameters */
>> ++ devbus,bus-width = <16>;
>> ++ devbus,turn-off-ps = <60000>;
>> ++ devbus,badr-skew-ps = <0>;
>> ++ devbus,acc-first-ps = <124000>;
>> ++ devbus,acc-next-ps = <248000>;
>> ++ devbus,rd-setup-ps = <0>;
>> ++ devbus,rd-hold-ps = <0>;
>> ++
>> ++ /* Write parameters */
>> ++ devbus,sync-enable = <0>;
>> ++ devbus,wr-high-ps = <60000>;
>> ++ devbus,wr-low-ps = <60000>;
>> ++ devbus,ale-wr-ps = <60000>;
>> ++};
>> +
>> -+ internal-regs {
>> -+ serial@12000 {
>> -+ status = "okay";
>> -+ };
>> -+ serial@12100 {
>> -+ status = "okay";
>> -+ };
>> ++&uart0 {
>> ++ status = "okay";
>> ++};
>> +
>> -+ i2c@11000 {
>> -+ clock-frequency = <100000>;
>> -+ status = "okay";
>> -+ };
>> ++&uart1 {
>> ++ status = "okay";
>> ++};
>> +
>> -+ mvsdio@d4000 {
>> -+ status = "disabled";
>> -+ };
>> ++&i2c0 {
>> ++ clock-frequency = <100000>;
>> ++ status = "okay";
>> ++};
>> +
>> -+ nand@d0000 {
>> -+ status = "okay";
>> -+ num-cs = <1>;
>> -+ marvell,nand-keep-config;
>> -+ marvell,nand-enable-arbiter;
>> -+ nand-on-flash-bbt;
>> -+ nand-ecc-strength = <4>;
>> -+ nand-ecc-step-size = <512>;
>> -+ };
>> -+ };
>> -+ };
>> ++&nand {
>> ++ status = "okay";
>> ++ num-cs = <1>;
>> ++ marvell,nand-keep-config;
>> ++ marvell,nand-enable-arbiter;
>> ++ nand-on-flash-bbt;
>> ++ nand-ecc-strength = <4>;
>> ++ nand-ecc-step-size = <512>;
>> +};
>> +
>> +&spi0 {
>>
>> --
>> 2.11.0.24.ge6920cf
>>
>
> --
> Gregory Clement, Free Electrons
> Kernel, drivers, real-time and embedded Linux
> development, consulting, training and support.
> http://free-electrons.com
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
WARNING: multiple messages have this Message-ID (diff)
From: Gregory CLEMENT <gregory.clement@free-electrons.com>
To: Stephen Boyd <sboyd@codeaurora.org>
Cc: Linus Walleij <linus.walleij@linaro.org>,
Chris Packham <chris.packham@alliedtelesis.co.nz>,
Mark Rutland <mark.rutland@arm.com>,
Andrew Lunn <andrew@lunn.ch>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Michael Turquette <mturquette@baylibre.com>,
Laxman Dewangan <ldewangan@nvidia.com>,
linux-clk@vger.kernel.org,
Florian Fainelli <f.fainelli@gmail.com>,
Juri Lelli <juri.lelli@arm.com>,
linux@armlinux.org.uk, Thierry Reding <treding@nvidia.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
devicetree@vger.kernel.org, Jason Cooper <jason@lakedaemon.net>,
Arnd Bergmann <arnd@arndb.de>,
linux-gpio@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
Chris Brand <chris.brand@broadcom.com>,
linux-arm-kernel@lists.infradead.org,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
Kalyan Kinthada <kalyan.kinthada@alliedtelesis.co.nz>,
linux-kernel@vger.kernel.org,
Sudeep Holla <sudeep.holla@arm.com>
Subject: Re: [PATCHv5 0/5] Support for Marvell switches with integrated CPUs
Date: Fri, 27 Jan 2017 17:49:27 +0100 [thread overview]
Message-ID: <87o9yswiqw.fsf@free-electrons.com> (raw)
In-Reply-To: <87wpdgwj72.fsf@free-electrons.com> (Gregory CLEMENT's message of "Fri, 27 Jan 2017 17:39:45 +0100")
Hi,
On ven., janv. 27 2017, Gregory CLEMENT <gregory.clement@free-electrons.com> wrote:
> Hi all,
>
> On ven., janv. 27 2017, Chris Packham <chris.packham@alliedtelesis.co.nz> wrote:
>
>> The 98DX3236, 98DX3336 and 98DX4251 are a set of switch ASICs with
>> integrated CPUs. They CPU block is common within these product lines and
>> (as far as I can tell/have been told) is based on the Armada XP. There
>> are a few differences due to the fact they have to squeeze the CPU into
>> the same package as the switch.
>>
>> I've rebased this series against linux-pinctrl/devel to get access to
>> mvebu_mmio_mpp_ctrl. Everything else still applies cleanly to
>> v4.10.0-rc5.
>
> Just to let you know that I plan to apply the 3 arm patch once Chris
> will have sent the new series with the minor fixes I asked on patch 3.
I meant patch 2!
And now patch 5 too :)
Gregory
> I already applied them in the for-next branch to benefit of some build
> test coverage.
>
> Stephen,
>
> you gave your Acked-by on the first patch, but don't you plan to apply
> it on the clk branch?
>
> If you really want I can apply on mvebu but there is no build
> dependencies, so the order the patches will be merged is not important.
>
> Linus,
>
> I expect you will apply the pinctrl patch on your tree as it depend of
> code already there.
>
> Thanks,
>
> Gregory
>
>>
>> Chris Packham (4):
>> clk: mvebu: support for 98DX3236 SoC
>> Changes in v2:
>> - Update devicetree binding documentation for new compatible string
>> Changes in v3:
>> - Add 98dx3236 support to mvebu/clk-corediv.c rather than creating a new
>> driver.
>> - Document mv98dx3236-corediv-clock binding
>> Changes in v4:
>> - None
>> Changes in v5:
>> - Collect ack from Rob
>> - Remove explicit initialisation of fields to 0 in mv98dx3236_coreclks
>> - Register dummy clock provider for marvell,mv98dx3236-cpu-clock
>> arm: mvebu: support for SMP on 98DX3336 SoC
>> Changes in v2:
>> - Document new enable-method value
>> - Correct some references from 98DX4521 to 98DX3236
>> Changes in v3:
>> - Simplify mv98dx3236_resume_init by using of_io_request_and_map()
>> Changes in v4:
>> - integrate changes into platsmp.c instead of new init call
>> - avoid duplicated code.
>> - fix error return
>> - Collect ack from Rob
>> Changes in v5:
>> - Remove useless casts (thanks to Stephen Boyd)
>> arm: mvebu: Add device tree for 98DX3236 SoCs
>> Changes in v2:
>> - Update devicetree binding documentation to reflect that 98DX3336 and
>> 984251 are supersets of 98DX3236.
>> - disable crypto block
>> - disable sdio for 98DX3236, enable for 98DX4251
>> Changes in v3:
>> - fix typo 4521 -> 4251
>> - document prestera bindings
>> - rework corediv-clock binding
>> - add label to packet processor node
>> - add new compatible string for DFX server
>> Changes in v4:
>> - Collect ack from Rob
>> Changes in v5:
>> - Fixup license text. Add labels to nodes.
>> arm: mvebu: Add device tree for db-dxbc2 and db-xc3-24g4xg boards
>> Changes in v5:
>> - update license text
>> - use node labels
>>
>> Kalyan Kinthada (1):
>> pinctrl: mvebu: pinctrl driver for 98DX3236 SoC
>> Changes in v2:
>> - include sdio support for the 98DX4251
>> Changes in v3:
>> - None
>> Changes in v4:
>> - Correct some discrepencies between binding and driver.
>> - Collect acks from Rob and Sebastian
>> Changes in v5:
>> - Update bindings to reflect "gpo" pins
>> - Use mvebu_mmio_mpp_ctrl instead of armada_xp_mpp_ctrl (note this is reliant
>> on changes queued in linux-pinctrl)
>>
>> Documentation/devicetree/bindings/arm/cpus.txt | 1 +
>> .../bindings/arm/marvell/98dx3236-resume-ctrl.txt | 16 ++
>> .../devicetree/bindings/arm/marvell/98dx3236.txt | 23 ++
>> .../bindings/clock/mvebu-corediv-clock.txt | 1 +
>> .../devicetree/bindings/clock/mvebu-cpu-clock.txt | 1 +
>> .../devicetree/bindings/net/marvell,prestera.txt | 50 ++++
>> .../pinctrl/marvell,armada-98dx3236-pinctrl.txt | 46 ++++
>> arch/arm/boot/dts/armada-xp-98dx3236.dtsi | 254 +++++++++++++++++++++
>> arch/arm/boot/dts/armada-xp-98dx3336.dtsi | 76 ++++++
>> arch/arm/boot/dts/armada-xp-98dx4251.dtsi | 90 ++++++++
>> arch/arm/boot/dts/db-dxbc2.dts | 151 ++++++++++++
>> arch/arm/boot/dts/db-xc3-24g4xg.dts | 142 ++++++++++++
>> arch/arm/mach-mvebu/platsmp.c | 86 +++++++
>> drivers/clk/mvebu/armada-xp.c | 39 ++++
>> drivers/clk/mvebu/clk-corediv.c | 23 ++
>> drivers/clk/mvebu/clk-cpu.c | 8 +
>> drivers/pinctrl/mvebu/pinctrl-armada-xp.c | 156 +++++++++++++
>> 17 files changed, 1163 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
>> create mode 100644 Documentation/devicetree/bindings/arm/marvell/98dx3236.txt
>> create mode 100644 Documentation/devicetree/bindings/net/marvell,prestera.txt
>> create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
>> create mode 100644 arch/arm/boot/dts/armada-xp-98dx3236.dtsi
>> create mode 100644 arch/arm/boot/dts/armada-xp-98dx3336.dtsi
>> create mode 100644 arch/arm/boot/dts/armada-xp-98dx4251.dtsi
>> create mode 100644 arch/arm/boot/dts/db-dxbc2.dts
>> create mode 100644 arch/arm/boot/dts/db-xc3-24g4xg.dts
>>
>> interdiff to v4:
>>
>> diff --git a/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt
>> index 520562a7dc2a..c7b4e3a6b2c6 100644
>> @@ -85,7 +86,7 @@
>> by address and length of the PMU DFS registers
>> - #clock-cells : should be set to 1.
>> diff --git a/drivers/clk/mvebu/armada-xp.c b/drivers/clk/mvebu/armada-xp.c
>> -index b3094315a3c0..0413bf8284e0 100644
>> +index b3094315a3c0..890a863ae0d0 100644
>> --- a/drivers/clk/mvebu/armada-xp.c
>> +++ b/drivers/clk/mvebu/armada-xp.c
>> return 250000000;
>> @@ -118,9 +119,6 @@
>> +static const struct coreclk_soc_desc mv98dx3236_coreclks = {
>> + .get_tclk_freq = mv98dx3236_get_tclk_freq,
>> + .get_cpu_freq = mv98dx3236_get_cpu_freq,
>> -+ .get_clk_ratio = NULL,
>> -+ .ratios = NULL,
>> -+ .num_ratios = 0,
>> +};
>> +
>> /*
>> @@ -200,53 +198,16 @@
>> +CLK_OF_DECLARE(mv98dx3236_corediv_clk, "marvell,mv98dx3236-corediv-clock",
>> + mv98dx3236_corediv_clk_init);
>> diff --git a/drivers/clk/mvebu/clk-cpu.c b/drivers/clk/mvebu/clk-cpu.c
>> -index 5837eb8a212f..3b8f0e14fa01 100644
>> +index 5837eb8a212f..044892b6534d 100644
>> --- a/drivers/clk/mvebu/clk-cpu.c
>> +++ b/drivers/clk/mvebu/clk-cpu.c
>> - .set_rate = clk_cpu_set_rate,
>> - };
>> -
>> --static void __init of_cpu_clk_setup(struct device_node *node)
>> -+/* Add parameter to allow this to support different clock operations. */
>> -+static void __init _of_cpu_clk_setup(struct device_node *node,
>> -+ const struct clk_ops *cpu_clk_ops)
>> - {
>> - struct cpu_clk *cpuclk;
>> - void __iomem *clock_complex_base = of_iomap(node, 0);
>> - cpuclk[cpu].hw.init = &init;
>>
>> - init.name = cpuclk[cpu].clk_name;
>> -- init.ops = &cpu_ops;
>> -+ init.ops = cpu_clk_ops;
>> - init.flags = 0;
>> - init.parent_names = &cpuclk[cpu].parent_name;
>> - init.num_parents = 1;
>> - iounmap(clock_complex_base);
>> - }
>> -
>> -+/* Use this function to call the generic setup with the correct
>> -+ * clock operation
>> -+ */
>> -+static void __init of_cpu_clk_setup(struct device_node *node)
>> -+{
>> -+ _of_cpu_clk_setup(node, &cpu_ops);
>> -+}
>> -+
>> CLK_OF_DECLARE(armada_xp_cpu_clock, "marvell,armada-xp-cpu-clock",
>> of_cpu_clk_setup);
>> +
>> -+/* Define the clock and operations for the mv98dx3236 - it cannot perform
>> -+ * any operations.
>> -+ */
>> -+static const struct clk_ops mv98dx3236_cpu_ops = {
>> -+ .recalc_rate = NULL,
>> -+ .round_rate = NULL,
>> -+ .set_rate = NULL,
>> -+};
>> -+
>> +static void __init of_mv98dx3236_cpu_clk_setup(struct device_node *node)
>> +{
>> -+ _of_cpu_clk_setup(node, &mv98dx3236_cpu_ops);
>> ++ of_clk_add_provider(node, of_clk_src_simple_get, NULL);
>> +}
>> +
>> +CLK_OF_DECLARE(mv98dx3236_cpu_clock, "marvell,mv98dx3236-cpu-clock",
>> @@ -285,7 +247,7 @@
>> "qcom,gcc-msm8660"
>> diff --git
> a/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
> b/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
>> new file mode 100644
>> -index 000000000000..8082ba872edd
>> +index 000000000000..26eb9d3aa630
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
>> +Resume Control
>> @@ -304,10 +266,8 @@
>> + compatible = "marvell,98dx3336-resume-ctrl";
>> + reg = <0x20980 0x10>;
>> +};
>> -+
>> -+
>> diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c
>> -index 46c742d3bd41..59be3ca0464f 100644
>> +index 46c742d3bd41..a5b464497e1a 100644
>> --- a/arch/arm/mach-mvebu/platsmp.c
>> +++ b/arch/arm/mach-mvebu/platsmp.c
>>
>> @@ -327,7 +287,7 @@
>> +static const struct of_device_id of_mv98dx3236_resume_table[] = {
>> + {
>> + .compatible = "marvell,98dx3336-resume-ctrl",
>> -+ .data = (void *)&mv98dx3336_resume_controller,
>> ++ .data = &mv98dx3336_resume_controller,
>> + },
>> + { /* end of list */ },
>> +};
>> @@ -337,7 +297,7 @@
>> + const struct of_device_id *match;
>> + struct device_node *np;
>> + void __iomem *base;
>> -+ struct resume_controller *rc;
>> ++ const struct resume_controller *rc;
>> +
>> + WARN_ON(hw_cpu != 1);
>> +
>> @@ -347,7 +307,7 @@
>> + return -ENODEV;
>> +
>> + base = of_io_request_and_map(np, 0, of_node_full_name(np));
>> -+ rc = (struct resume_controller *)match->data;
>> ++ rc = match->data;
>> + of_node_put(np);
>> + if (IS_ERR(base))
>> + return PTR_ERR(base);
>> @@ -411,15 +371,17 @@
>> diff --git
> a/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
> b/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
>> new file mode 100644
>> -index 000000000000..d4e6ecdfc853
>> +index 000000000000..97aef67ee769
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
>> +* Marvell 98dx3236 pinctrl driver for mpp
>> @@ -435,41 +397,41 @@
>> +
>> +name pins functions
>> +================================================================================
>> -+mpp0 0 gpio, spi0(mosi), dev(ad8)
>> ++mpp0 0 gpo, spi0(mosi), dev(ad8)
>> +mpp1 1 gpio, spi0(miso), dev(ad9)
>> -+mpp2 2 gpio, spi0(sck), dev(ad10)
>> ++mpp2 2 gpo, spi0(sck), dev(ad10)
>> +mpp3 3 gpio, spi0(cs0), dev(ad11)
>> +mpp4 4 gpio, spi0(cs1), smi(mdc), dev(cs0)
>> +mpp5 5 gpio, pex(rsto), sd0(cmd), dev(bootcs)
>> -+mpp6 6 gpio, sd0(clk), dev(a2)
>> ++mpp6 6 gpo, sd0(clk), dev(a2)
>> +mpp7 7 gpio, sd0(d0), dev(ale0)
>> +mpp8 8 gpio, sd0(d1), dev(ale1)
>> +mpp9 9 gpio, sd0(d2), dev(ready0)
>> +mpp10 10 gpio, sd0(d3), dev(ad12)
>> +mpp11 11 gpio, uart1(rxd), uart0(cts), dev(ad13)
>> -+mpp12 12 gpio, uart1(txd), uart0(rts), dev(ad14)
>> ++mpp12 12 gpo, uart1(txd), uart0(rts), dev(ad14)
>> +mpp13 13 gpio, intr(out), dev(ad15)
>> +mpp14 14 gpio, i2c0(sck)
>> +mpp15 15 gpio, i2c0(sda)
>> -+mpp16 16 gpio, dev(oe)
>> -+mpp17 17 gpio, dev(clk)
>> ++mpp16 16 gpo, dev(oe)
>> ++mpp17 17 gpo, dev(clkout)
>> +mpp18 18 gpio, uart1(txd)
>> +mpp19 19 gpio, uart1(rxd), dev(rb)
>> -+mpp20 20 gpio, dev(we)
>> -+mpp21 21 gpio, dev(ad0)
>> -+mpp22 22 gpio, dev(ad1)
>> -+mpp23 23 gpio, dev(ad2)
>> -+mpp24 24 gpio, dev(ad3)
>> -+mpp25 25 gpio, dev(ad4)
>> -+mpp26 26 gpio, dev(ad5)
>> -+mpp27 27 gpio, dev(ad6)
>> -+mpp28 28 gpio, dev(ad7)
>> -+mpp29 29 gpio, dev(a0)
>> -+mpp30 30 gpio, dev(a1)
>> ++mpp20 20 gpo, dev(we0)
>> ++mpp21 21 gpo, dev(ad0)
>> ++mpp22 22 gpo, dev(ad1)
>> ++mpp23 23 gpo, dev(ad2)
>> ++mpp24 24 gpo, dev(ad3)
>> ++mpp25 25 gpo, dev(ad4)
>> ++mpp26 26 gpo, dev(ad5)
>> ++mpp27 27 gpo, dev(ad6)
>> ++mpp28 28 gpo, dev(ad7)
>> ++mpp29 29 gpo, dev(a0)
>> ++mpp30 30 gpo, dev(a1)
>> +mpp31 31 gpio, slv_smi(mdc), smi(mdc), dev(we1)
>> +mpp32 32 gpio, slv_smi(mdio), smi(mdio), dev(cs1)
>> diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-xp.c b/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
>> -index e4ea71a9d985..554eeae8cd21 100644
>> +index 63e1bd506983..61cbc138703e 100644
>> --- a/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
>> +++ b/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
>> V_MV78460 = BIT(2),
>> @@ -495,8 +457,8 @@
>> + MPP_VAR_FUNCTION(0x2, "spi0", "miso", V_98DX3236_PLUS),
>> + MPP_VAR_FUNCTION(0x4, "dev", "ad9", V_98DX3236_PLUS)),
>> + MPP_MODE(2,
>> -+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
>> -+ MPP_VAR_FUNCTION(0x2, "spi0", "csk", V_98DX3236_PLUS),
>> ++ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
>> ++ MPP_VAR_FUNCTION(0x2, "spi0", "sck", V_98DX3236_PLUS),
>> + MPP_VAR_FUNCTION(0x4, "dev", "ad10", V_98DX3236_PLUS)),
>> + MPP_MODE(3,
>> + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
>> @@ -511,7 +473,7 @@
>> + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
>> + MPP_VAR_FUNCTION(0x1, "pex", "rsto", V_98DX3236_PLUS),
>> + MPP_VAR_FUNCTION(0x2, "sd0", "cmd", V_98DX4251),
>> -+ MPP_VAR_FUNCTION(0x4, "dev", "bootcs0", V_98DX3236_PLUS)),
>> ++ MPP_VAR_FUNCTION(0x4, "dev", "bootcs", V_98DX3236_PLUS)),
>> + MPP_MODE(6,
>> + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
>> + MPP_VAR_FUNCTION(0x2, "sd0", "clk", V_98DX4251),
>> @@ -563,7 +525,8 @@
>> + MPP_VAR_FUNCTION(0x3, "uart1", "txd", V_98DX3236_PLUS)),
>> + MPP_MODE(19,
>> + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
>> -+ MPP_VAR_FUNCTION(0x3, "uart1", "rxd", V_98DX3236_PLUS)),
>> ++ MPP_VAR_FUNCTION(0x3, "uart1", "rxd", V_98DX3236_PLUS),
>> ++ MPP_VAR_FUNCTION(0x4, "dev", "rb", V_98DX3236_PLUS)),
>> + MPP_MODE(20,
>> + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
>> + MPP_VAR_FUNCTION(0x4, "dev", "we0", V_98DX3236_PLUS)),
>> @@ -630,11 +593,11 @@
>> };
>>
>> +static struct mvebu_mpp_ctrl mv98dx3236_mpp_controls[] = {
>> -+ MPP_FUNC_CTRL(0, 32, NULL, armada_xp_mpp_ctrl),
>> ++ MPP_FUNC_CTRL(0, 32, NULL, mvebu_mmio_mpp_ctrl),
>> +};
>> +
>> +static struct pinctrl_gpio_range mv98dx3236_mpp_gpio_ranges[] = {
>> -+ MPP_GPIO_RANGE(0, 0, 0, 32),
>> ++ MPP_GPIO_RANGE(0, 0, 0, 32),
>> +};
>> +
>> static int armada_xp_pinctrl_suspend(struct platform_device *pdev,
>> @@ -767,7 +731,7 @@
>> +};
>> diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
>> new file mode 100644
>> -index 000000000000..4b7b2fe3b682
>> +index 000000000000..9461128fae24
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
>> +/*
>> @@ -785,17 +749,17 @@
>> + * published by the Free Software Foundation; either version 2 of the
>> + * License, or (at your option) any later version.
>> + *
>> -+ * This file is distributed in the hope that it will be useful
>> ++ * This file is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> -+ * Or, alternatively
>> ++ * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> -+ * restriction, including without limitation the rights to use
>> ++ * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> @@ -804,11 +768,11 @@
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> -+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
>> ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
>> ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> @@ -851,9 +815,9 @@
>> + MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
>> +
>> + /*
>> -+ * 98DX3236 has 1 x1 PCIe unit Gen2.0: One unit can be
>> ++ * 98DX3236 has 1 x1 PCIe unit Gen2.0
>> + */
>> -+ pcie-controller {
>> ++ pciec: pcie-controller@82000000 {
>> + compatible = "marvell,armada-xp-pcie";
>> + status = "disabled";
>> + device_type = "pci";
>> @@ -870,7 +834,7 @@
>> + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
>> + 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */>;
>> +
>> -+ pcie@1,0 {
>> ++ pcie1: pcie@1,0 {
>> + device_type = "pci";
>> + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
>> + reg = <0x0800 0 0 0 0>;
>> @@ -967,7 +931,7 @@
>> + };
>> + };
>> +
>> -+ dfx-registers {
>> ++ dfxr: dfx-registers@ac000000 {
>> + compatible = "simple-bus";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> @@ -987,7 +951,7 @@
>> + };
>> + };
>> +
>> -+ switch {
>> ++ switch: switch@a8000000 {
>> + compatible = "simple-bus";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> @@ -1026,7 +990,7 @@
>> +};
>> diff --git a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
>> new file mode 100644
>> -index 000000000000..a9b0f47f8df9
>> +index 000000000000..e1580afdc260
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
>> +/*
>> @@ -1044,17 +1008,17 @@
>> + * published by the Free Software Foundation; either version 2 of the
>> + * License, or (at your option) any later version.
>> + *
>> -+ * This file is distributed in the hope that it will be useful
>> ++ * This file is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> -+ * Or, alternatively
>> ++ * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> -+ * restriction, including without limitation the rights to use
>> ++ * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> @@ -1063,16 +1027,16 @@
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> -+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
>> ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
>> ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> + *
>> -+ * Contains definitions specific to the 98dx3336 SoC that are not
>> ++ * Contains definitions specific to the 98dx3236 SoC that are not
>> + * common to all Armada XP SoCs.
>> + */
>> +
>> @@ -1107,7 +1071,7 @@
>> +};
>> diff --git a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
>> new file mode 100644
>> -index 000000000000..446e6e65ec59
>> +index 000000000000..4b0533a4ccb7
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
>> +/*
>> @@ -1125,17 +1089,17 @@
>> + * published by the Free Software Foundation; either version 2 of the
>> + * License, or (at your option) any later version.
>> + *
>> -+ * This file is distributed in the hope that it will be useful
>> ++ * This file is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> -+ * Or, alternatively
>> ++ * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> -+ * restriction, including without limitation the rights to use
>> ++ * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> @@ -1144,11 +1108,11 @@
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> -+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
>> ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
>> ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> @@ -1213,15 +1177,15 @@
>> diff --git a/arch/arm/boot/dts/db-dxbc2.dts b/arch/arm/boot/dts/db-dxbc2.dts
>> new file mode 100644
>> -index 000000000000..f56786cea5f8
>> +index 000000000000..a8130805074e
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/db-dxbc2.dts
>> +/*
>> @@ -1241,17 +1205,17 @@
>> + * published by the Free Software Foundation; either version 2 of the
>> + * License, or (at your option) any later version.
>> + *
>> -+ * This file is distributed in the hope that it will be useful
>> ++ * This file is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> -+ * Or, alternatively
>> ++ * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> -+ * restriction, including without limitation the rights to use
>> ++ * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> @@ -1260,11 +1224,11 @@
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> -+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
>> ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
>> ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> @@ -1295,66 +1259,58 @@
>> + reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
>> + };
>> +
>> -+ soc {
>> -+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
>> -+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
>> -+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
>> -+ MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
>> -+ MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
>> ++};
>> +
>> -+ devbus-bootcs {
>> -+ status = "okay";
>> ++&devbus_bootcs {
>> ++ status = "okay";
>> +
>> -+ /* Device Bus parameters are required */
>> ++ /* Device Bus parameters are required */
>> +
>> -+ /* Read parameters */
>> -+ devbus,bus-width = <16>;
>> -+ devbus,turn-off-ps = <60000>;
>> -+ devbus,badr-skew-ps = <0>;
>> -+ devbus,acc-first-ps = <124000>;
>> -+ devbus,acc-next-ps = <248000>;
>> -+ devbus,rd-setup-ps = <0>;
>> -+ devbus,rd-hold-ps = <0>;
>> -+
>> -+ /* Write parameters */
>> -+ devbus,sync-enable = <0>;
>> -+ devbus,wr-high-ps = <60000>;
>> -+ devbus,wr-low-ps = <60000>;
>> -+ devbus,ale-wr-ps = <60000>;
>> -+ };
>> ++ /* Read parameters */
>> ++ devbus,bus-width = <16>;
>> ++ devbus,turn-off-ps = <60000>;
>> ++ devbus,badr-skew-ps = <0>;
>> ++ devbus,acc-first-ps = <124000>;
>> ++ devbus,acc-next-ps = <248000>;
>> ++ devbus,rd-setup-ps = <0>;
>> ++ devbus,rd-hold-ps = <0>;
>> ++
>> ++ /* Write parameters */
>> ++ devbus,sync-enable = <0>;
>> ++ devbus,wr-high-ps = <60000>;
>> ++ devbus,wr-low-ps = <60000>;
>> ++ devbus,ale-wr-ps = <60000>;
>> ++};
>> +
>> -+ internal-regs {
>> -+ serial@12000 {
>> -+ status = "okay";
>> -+ };
>> -+ serial@12100 {
>> -+ status = "okay";
>> -+ };
>> ++&i2c0 {
>> ++ clock-frequency = <100000>;
>> ++ status = "okay";
>> ++};
>> +
>> -+ i2c@11000 {
>> -+ clock-frequency = <100000>;
>> -+ status = "okay";
>> -+ };
>> ++&uart0 {
>> ++ status = "okay";
>> ++};
>> +
>> -+ mvsdio@d4000 {
>> -+ pinctrl-0 = <&sdio_pins>;
>> -+ pinctrl-names = "default";
>> -+ status = "okay";
>> -+ /* No CD or WP GPIOs */
>> -+ broken-cd;
>> -+ };
>> ++&uart1 {
>> ++ status = "okay";
>> ++};
>> +
>> -+ nand@d0000 {
>> -+ status = "okay";
>> -+ num-cs = <1>;
>> -+ marvell,nand-keep-config;
>> -+ marvell,nand-enable-arbiter;
>> -+ nand-on-flash-bbt;
>> -+ nand-ecc-strength = <4>;
>> -+ nand-ecc-step-size = <512>;
>> -+ };
>> -+ };
>> -+ };
>> ++&nand {
>> ++ status = "okay";
>> ++ num-cs = <1>;
>> ++ marvell,nand-keep-config;
>> ++ marvell,nand-enable-arbiter;
>> ++ nand-on-flash-bbt;
>> ++ nand-ecc-strength = <4>;
>> ++ nand-ecc-step-size = <512>;
>> ++};
>> ++
>> ++&sdio {
>> ++ pinctrl-0 = <&sdio_pins>;
>> ++ pinctrl-names = "default";
>> ++ status = "okay";
>> ++ /* No CD or WP GPIOs */
>> ++ broken-cd;
>> +};
>> +
>> +&spi0 {
>> @@ -1385,7 +1341,7 @@
>> +};
>> diff --git a/arch/arm/boot/dts/db-xc3-24g4xg.dts b/arch/arm/boot/dts/db-xc3-24g4xg.dts
>> new file mode 100644
>> -index 000000000000..5eb89ffb9a7d
>> +index 000000000000..4e07cb6ed800
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/db-xc3-24g4xg.dts
>> +/*
>> @@ -1405,17 +1361,17 @@
>> + * published by the Free Software Foundation; either version 2 of the
>> + * License, or (at your option) any later version.
>> + *
>> -+ * This file is distributed in the hope that it will be useful
>> ++ * This file is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> -+ * Or, alternatively
>> ++ * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> -+ * restriction, including without limitation the rights to use
>> ++ * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> @@ -1424,11 +1380,11 @@
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> -+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
>> ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
>> ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> @@ -1458,63 +1414,50 @@
>> + device_type = "memory";
>> + reg = <0 0x00000000 0 0x40000000>; /* 1 GB */
>> + };
>> ++};
>> +
>> -+ soc {
>> -+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
>> -+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
>> -+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
>> -+ MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
>> -+ MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
>> -+
>> -+ devbus-bootcs {
>> -+ status = "okay";
>> ++&devbus_bootcs {
>> ++ status = "okay";
>> +
>> -+ /* Device Bus parameters are required */
>> ++ /* Device Bus parameters are required */
>> +
>> -+ /* Read parameters */
>> -+ devbus,bus-width = <16>;
>> -+ devbus,turn-off-ps = <60000>;
>> -+ devbus,badr-skew-ps = <0>;
>> -+ devbus,acc-first-ps = <124000>;
>> -+ devbus,acc-next-ps = <248000>;
>> -+ devbus,rd-setup-ps = <0>;
>> -+ devbus,rd-hold-ps = <0>;
>> -+
>> -+ /* Write parameters */
>> -+ devbus,sync-enable = <0>;
>> -+ devbus,wr-high-ps = <60000>;
>> -+ devbus,wr-low-ps = <60000>;
>> -+ devbus,ale-wr-ps = <60000>;
>> -+ };
>> ++ /* Read parameters */
>> ++ devbus,bus-width = <16>;
>> ++ devbus,turn-off-ps = <60000>;
>> ++ devbus,badr-skew-ps = <0>;
>> ++ devbus,acc-first-ps = <124000>;
>> ++ devbus,acc-next-ps = <248000>;
>> ++ devbus,rd-setup-ps = <0>;
>> ++ devbus,rd-hold-ps = <0>;
>> ++
>> ++ /* Write parameters */
>> ++ devbus,sync-enable = <0>;
>> ++ devbus,wr-high-ps = <60000>;
>> ++ devbus,wr-low-ps = <60000>;
>> ++ devbus,ale-wr-ps = <60000>;
>> ++};
>> +
>> -+ internal-regs {
>> -+ serial@12000 {
>> -+ status = "okay";
>> -+ };
>> -+ serial@12100 {
>> -+ status = "okay";
>> -+ };
>> ++&uart0 {
>> ++ status = "okay";
>> ++};
>> +
>> -+ i2c@11000 {
>> -+ clock-frequency = <100000>;
>> -+ status = "okay";
>> -+ };
>> ++&uart1 {
>> ++ status = "okay";
>> ++};
>> +
>> -+ mvsdio@d4000 {
>> -+ status = "disabled";
>> -+ };
>> ++&i2c0 {
>> ++ clock-frequency = <100000>;
>> ++ status = "okay";
>> ++};
>> +
>> -+ nand@d0000 {
>> -+ status = "okay";
>> -+ num-cs = <1>;
>> -+ marvell,nand-keep-config;
>> -+ marvell,nand-enable-arbiter;
>> -+ nand-on-flash-bbt;
>> -+ nand-ecc-strength = <4>;
>> -+ nand-ecc-step-size = <512>;
>> -+ };
>> -+ };
>> -+ };
>> ++&nand {
>> ++ status = "okay";
>> ++ num-cs = <1>;
>> ++ marvell,nand-keep-config;
>> ++ marvell,nand-enable-arbiter;
>> ++ nand-on-flash-bbt;
>> ++ nand-ecc-strength = <4>;
>> ++ nand-ecc-step-size = <512>;
>> +};
>> +
>> +&spi0 {
>>
>> --
>> 2.11.0.24.ge6920cf
>>
>
> --
> Gregory Clement, Free Electrons
> Kernel, drivers, real-time and embedded Linux
> development, consulting, training and support.
> http://free-electrons.com
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
WARNING: multiple messages have this Message-ID (diff)
From: gregory.clement@free-electrons.com (Gregory CLEMENT)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv5 0/5] Support for Marvell switches with integrated CPUs
Date: Fri, 27 Jan 2017 17:49:27 +0100 [thread overview]
Message-ID: <87o9yswiqw.fsf@free-electrons.com> (raw)
In-Reply-To: <87wpdgwj72.fsf@free-electrons.com> (Gregory CLEMENT's message of "Fri, 27 Jan 2017 17:39:45 +0100")
Hi,
On ven., janv. 27 2017, Gregory CLEMENT <gregory.clement@free-electrons.com> wrote:
> Hi all,
>
> On ven., janv. 27 2017, Chris Packham <chris.packham@alliedtelesis.co.nz> wrote:
>
>> The 98DX3236, 98DX3336 and 98DX4251 are a set of switch ASICs with
>> integrated CPUs. They CPU block is common within these product lines and
>> (as far as I can tell/have been told) is based on the Armada XP. There
>> are a few differences due to the fact they have to squeeze the CPU into
>> the same package as the switch.
>>
>> I've rebased this series against linux-pinctrl/devel to get access to
>> mvebu_mmio_mpp_ctrl. Everything else still applies cleanly to
>> v4.10.0-rc5.
>
> Just to let you know that I plan to apply the 3 arm patch once Chris
> will have sent the new series with the minor fixes I asked on patch 3.
I meant patch 2!
And now patch 5 too :)
Gregory
> I already applied them in the for-next branch to benefit of some build
> test coverage.
>
> Stephen,
>
> you gave your Acked-by on the first patch, but don't you plan to apply
> it on the clk branch?
>
> If you really want I can apply on mvebu but there is no build
> dependencies, so the order the patches will be merged is not important.
>
> Linus,
>
> I expect you will apply the pinctrl patch on your tree as it depend of
> code already there.
>
> Thanks,
>
> Gregory
>
>>
>> Chris Packham (4):
>> clk: mvebu: support for 98DX3236 SoC
>> Changes in v2:
>> - Update devicetree binding documentation for new compatible string
>> Changes in v3:
>> - Add 98dx3236 support to mvebu/clk-corediv.c rather than creating a new
>> driver.
>> - Document mv98dx3236-corediv-clock binding
>> Changes in v4:
>> - None
>> Changes in v5:
>> - Collect ack from Rob
>> - Remove explicit initialisation of fields to 0 in mv98dx3236_coreclks
>> - Register dummy clock provider for marvell,mv98dx3236-cpu-clock
>> arm: mvebu: support for SMP on 98DX3336 SoC
>> Changes in v2:
>> - Document new enable-method value
>> - Correct some references from 98DX4521 to 98DX3236
>> Changes in v3:
>> - Simplify mv98dx3236_resume_init by using of_io_request_and_map()
>> Changes in v4:
>> - integrate changes into platsmp.c instead of new init call
>> - avoid duplicated code.
>> - fix error return
>> - Collect ack from Rob
>> Changes in v5:
>> - Remove useless casts (thanks to Stephen Boyd)
>> arm: mvebu: Add device tree for 98DX3236 SoCs
>> Changes in v2:
>> - Update devicetree binding documentation to reflect that 98DX3336 and
>> 984251 are supersets of 98DX3236.
>> - disable crypto block
>> - disable sdio for 98DX3236, enable for 98DX4251
>> Changes in v3:
>> - fix typo 4521 -> 4251
>> - document prestera bindings
>> - rework corediv-clock binding
>> - add label to packet processor node
>> - add new compatible string for DFX server
>> Changes in v4:
>> - Collect ack from Rob
>> Changes in v5:
>> - Fixup license text. Add labels to nodes.
>> arm: mvebu: Add device tree for db-dxbc2 and db-xc3-24g4xg boards
>> Changes in v5:
>> - update license text
>> - use node labels
>>
>> Kalyan Kinthada (1):
>> pinctrl: mvebu: pinctrl driver for 98DX3236 SoC
>> Changes in v2:
>> - include sdio support for the 98DX4251
>> Changes in v3:
>> - None
>> Changes in v4:
>> - Correct some discrepencies between binding and driver.
>> - Collect acks from Rob and Sebastian
>> Changes in v5:
>> - Update bindings to reflect "gpo" pins
>> - Use mvebu_mmio_mpp_ctrl instead of armada_xp_mpp_ctrl (note this is reliant
>> on changes queued in linux-pinctrl)
>>
>> Documentation/devicetree/bindings/arm/cpus.txt | 1 +
>> .../bindings/arm/marvell/98dx3236-resume-ctrl.txt | 16 ++
>> .../devicetree/bindings/arm/marvell/98dx3236.txt | 23 ++
>> .../bindings/clock/mvebu-corediv-clock.txt | 1 +
>> .../devicetree/bindings/clock/mvebu-cpu-clock.txt | 1 +
>> .../devicetree/bindings/net/marvell,prestera.txt | 50 ++++
>> .../pinctrl/marvell,armada-98dx3236-pinctrl.txt | 46 ++++
>> arch/arm/boot/dts/armada-xp-98dx3236.dtsi | 254 +++++++++++++++++++++
>> arch/arm/boot/dts/armada-xp-98dx3336.dtsi | 76 ++++++
>> arch/arm/boot/dts/armada-xp-98dx4251.dtsi | 90 ++++++++
>> arch/arm/boot/dts/db-dxbc2.dts | 151 ++++++++++++
>> arch/arm/boot/dts/db-xc3-24g4xg.dts | 142 ++++++++++++
>> arch/arm/mach-mvebu/platsmp.c | 86 +++++++
>> drivers/clk/mvebu/armada-xp.c | 39 ++++
>> drivers/clk/mvebu/clk-corediv.c | 23 ++
>> drivers/clk/mvebu/clk-cpu.c | 8 +
>> drivers/pinctrl/mvebu/pinctrl-armada-xp.c | 156 +++++++++++++
>> 17 files changed, 1163 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
>> create mode 100644 Documentation/devicetree/bindings/arm/marvell/98dx3236.txt
>> create mode 100644 Documentation/devicetree/bindings/net/marvell,prestera.txt
>> create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
>> create mode 100644 arch/arm/boot/dts/armada-xp-98dx3236.dtsi
>> create mode 100644 arch/arm/boot/dts/armada-xp-98dx3336.dtsi
>> create mode 100644 arch/arm/boot/dts/armada-xp-98dx4251.dtsi
>> create mode 100644 arch/arm/boot/dts/db-dxbc2.dts
>> create mode 100644 arch/arm/boot/dts/db-xc3-24g4xg.dts
>>
>> interdiff to v4:
>>
>> diff --git a/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt
>> index 520562a7dc2a..c7b4e3a6b2c6 100644
>> @@ -85,7 +86,7 @@
>> by address and length of the PMU DFS registers
>> - #clock-cells : should be set to 1.
>> diff --git a/drivers/clk/mvebu/armada-xp.c b/drivers/clk/mvebu/armada-xp.c
>> -index b3094315a3c0..0413bf8284e0 100644
>> +index b3094315a3c0..890a863ae0d0 100644
>> --- a/drivers/clk/mvebu/armada-xp.c
>> +++ b/drivers/clk/mvebu/armada-xp.c
>> return 250000000;
>> @@ -118,9 +119,6 @@
>> +static const struct coreclk_soc_desc mv98dx3236_coreclks = {
>> + .get_tclk_freq = mv98dx3236_get_tclk_freq,
>> + .get_cpu_freq = mv98dx3236_get_cpu_freq,
>> -+ .get_clk_ratio = NULL,
>> -+ .ratios = NULL,
>> -+ .num_ratios = 0,
>> +};
>> +
>> /*
>> @@ -200,53 +198,16 @@
>> +CLK_OF_DECLARE(mv98dx3236_corediv_clk, "marvell,mv98dx3236-corediv-clock",
>> + mv98dx3236_corediv_clk_init);
>> diff --git a/drivers/clk/mvebu/clk-cpu.c b/drivers/clk/mvebu/clk-cpu.c
>> -index 5837eb8a212f..3b8f0e14fa01 100644
>> +index 5837eb8a212f..044892b6534d 100644
>> --- a/drivers/clk/mvebu/clk-cpu.c
>> +++ b/drivers/clk/mvebu/clk-cpu.c
>> - .set_rate = clk_cpu_set_rate,
>> - };
>> -
>> --static void __init of_cpu_clk_setup(struct device_node *node)
>> -+/* Add parameter to allow this to support different clock operations. */
>> -+static void __init _of_cpu_clk_setup(struct device_node *node,
>> -+ const struct clk_ops *cpu_clk_ops)
>> - {
>> - struct cpu_clk *cpuclk;
>> - void __iomem *clock_complex_base = of_iomap(node, 0);
>> - cpuclk[cpu].hw.init = &init;
>>
>> - init.name = cpuclk[cpu].clk_name;
>> -- init.ops = &cpu_ops;
>> -+ init.ops = cpu_clk_ops;
>> - init.flags = 0;
>> - init.parent_names = &cpuclk[cpu].parent_name;
>> - init.num_parents = 1;
>> - iounmap(clock_complex_base);
>> - }
>> -
>> -+/* Use this function to call the generic setup with the correct
>> -+ * clock operation
>> -+ */
>> -+static void __init of_cpu_clk_setup(struct device_node *node)
>> -+{
>> -+ _of_cpu_clk_setup(node, &cpu_ops);
>> -+}
>> -+
>> CLK_OF_DECLARE(armada_xp_cpu_clock, "marvell,armada-xp-cpu-clock",
>> of_cpu_clk_setup);
>> +
>> -+/* Define the clock and operations for the mv98dx3236 - it cannot perform
>> -+ * any operations.
>> -+ */
>> -+static const struct clk_ops mv98dx3236_cpu_ops = {
>> -+ .recalc_rate = NULL,
>> -+ .round_rate = NULL,
>> -+ .set_rate = NULL,
>> -+};
>> -+
>> +static void __init of_mv98dx3236_cpu_clk_setup(struct device_node *node)
>> +{
>> -+ _of_cpu_clk_setup(node, &mv98dx3236_cpu_ops);
>> ++ of_clk_add_provider(node, of_clk_src_simple_get, NULL);
>> +}
>> +
>> +CLK_OF_DECLARE(mv98dx3236_cpu_clock, "marvell,mv98dx3236-cpu-clock",
>> @@ -285,7 +247,7 @@
>> "qcom,gcc-msm8660"
>> diff --git
> a/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
> b/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
>> new file mode 100644
>> -index 000000000000..8082ba872edd
>> +index 000000000000..26eb9d3aa630
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
>> +Resume Control
>> @@ -304,10 +266,8 @@
>> + compatible = "marvell,98dx3336-resume-ctrl";
>> + reg = <0x20980 0x10>;
>> +};
>> -+
>> -+
>> diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c
>> -index 46c742d3bd41..59be3ca0464f 100644
>> +index 46c742d3bd41..a5b464497e1a 100644
>> --- a/arch/arm/mach-mvebu/platsmp.c
>> +++ b/arch/arm/mach-mvebu/platsmp.c
>>
>> @@ -327,7 +287,7 @@
>> +static const struct of_device_id of_mv98dx3236_resume_table[] = {
>> + {
>> + .compatible = "marvell,98dx3336-resume-ctrl",
>> -+ .data = (void *)&mv98dx3336_resume_controller,
>> ++ .data = &mv98dx3336_resume_controller,
>> + },
>> + { /* end of list */ },
>> +};
>> @@ -337,7 +297,7 @@
>> + const struct of_device_id *match;
>> + struct device_node *np;
>> + void __iomem *base;
>> -+ struct resume_controller *rc;
>> ++ const struct resume_controller *rc;
>> +
>> + WARN_ON(hw_cpu != 1);
>> +
>> @@ -347,7 +307,7 @@
>> + return -ENODEV;
>> +
>> + base = of_io_request_and_map(np, 0, of_node_full_name(np));
>> -+ rc = (struct resume_controller *)match->data;
>> ++ rc = match->data;
>> + of_node_put(np);
>> + if (IS_ERR(base))
>> + return PTR_ERR(base);
>> @@ -411,15 +371,17 @@
>> diff --git
> a/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
> b/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
>> new file mode 100644
>> -index 000000000000..d4e6ecdfc853
>> +index 000000000000..97aef67ee769
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
>> +* Marvell 98dx3236 pinctrl driver for mpp
>> @@ -435,41 +397,41 @@
>> +
>> +name pins functions
>> +================================================================================
>> -+mpp0 0 gpio, spi0(mosi), dev(ad8)
>> ++mpp0 0 gpo, spi0(mosi), dev(ad8)
>> +mpp1 1 gpio, spi0(miso), dev(ad9)
>> -+mpp2 2 gpio, spi0(sck), dev(ad10)
>> ++mpp2 2 gpo, spi0(sck), dev(ad10)
>> +mpp3 3 gpio, spi0(cs0), dev(ad11)
>> +mpp4 4 gpio, spi0(cs1), smi(mdc), dev(cs0)
>> +mpp5 5 gpio, pex(rsto), sd0(cmd), dev(bootcs)
>> -+mpp6 6 gpio, sd0(clk), dev(a2)
>> ++mpp6 6 gpo, sd0(clk), dev(a2)
>> +mpp7 7 gpio, sd0(d0), dev(ale0)
>> +mpp8 8 gpio, sd0(d1), dev(ale1)
>> +mpp9 9 gpio, sd0(d2), dev(ready0)
>> +mpp10 10 gpio, sd0(d3), dev(ad12)
>> +mpp11 11 gpio, uart1(rxd), uart0(cts), dev(ad13)
>> -+mpp12 12 gpio, uart1(txd), uart0(rts), dev(ad14)
>> ++mpp12 12 gpo, uart1(txd), uart0(rts), dev(ad14)
>> +mpp13 13 gpio, intr(out), dev(ad15)
>> +mpp14 14 gpio, i2c0(sck)
>> +mpp15 15 gpio, i2c0(sda)
>> -+mpp16 16 gpio, dev(oe)
>> -+mpp17 17 gpio, dev(clk)
>> ++mpp16 16 gpo, dev(oe)
>> ++mpp17 17 gpo, dev(clkout)
>> +mpp18 18 gpio, uart1(txd)
>> +mpp19 19 gpio, uart1(rxd), dev(rb)
>> -+mpp20 20 gpio, dev(we)
>> -+mpp21 21 gpio, dev(ad0)
>> -+mpp22 22 gpio, dev(ad1)
>> -+mpp23 23 gpio, dev(ad2)
>> -+mpp24 24 gpio, dev(ad3)
>> -+mpp25 25 gpio, dev(ad4)
>> -+mpp26 26 gpio, dev(ad5)
>> -+mpp27 27 gpio, dev(ad6)
>> -+mpp28 28 gpio, dev(ad7)
>> -+mpp29 29 gpio, dev(a0)
>> -+mpp30 30 gpio, dev(a1)
>> ++mpp20 20 gpo, dev(we0)
>> ++mpp21 21 gpo, dev(ad0)
>> ++mpp22 22 gpo, dev(ad1)
>> ++mpp23 23 gpo, dev(ad2)
>> ++mpp24 24 gpo, dev(ad3)
>> ++mpp25 25 gpo, dev(ad4)
>> ++mpp26 26 gpo, dev(ad5)
>> ++mpp27 27 gpo, dev(ad6)
>> ++mpp28 28 gpo, dev(ad7)
>> ++mpp29 29 gpo, dev(a0)
>> ++mpp30 30 gpo, dev(a1)
>> +mpp31 31 gpio, slv_smi(mdc), smi(mdc), dev(we1)
>> +mpp32 32 gpio, slv_smi(mdio), smi(mdio), dev(cs1)
>> diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-xp.c b/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
>> -index e4ea71a9d985..554eeae8cd21 100644
>> +index 63e1bd506983..61cbc138703e 100644
>> --- a/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
>> +++ b/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
>> V_MV78460 = BIT(2),
>> @@ -495,8 +457,8 @@
>> + MPP_VAR_FUNCTION(0x2, "spi0", "miso", V_98DX3236_PLUS),
>> + MPP_VAR_FUNCTION(0x4, "dev", "ad9", V_98DX3236_PLUS)),
>> + MPP_MODE(2,
>> -+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
>> -+ MPP_VAR_FUNCTION(0x2, "spi0", "csk", V_98DX3236_PLUS),
>> ++ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
>> ++ MPP_VAR_FUNCTION(0x2, "spi0", "sck", V_98DX3236_PLUS),
>> + MPP_VAR_FUNCTION(0x4, "dev", "ad10", V_98DX3236_PLUS)),
>> + MPP_MODE(3,
>> + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
>> @@ -511,7 +473,7 @@
>> + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
>> + MPP_VAR_FUNCTION(0x1, "pex", "rsto", V_98DX3236_PLUS),
>> + MPP_VAR_FUNCTION(0x2, "sd0", "cmd", V_98DX4251),
>> -+ MPP_VAR_FUNCTION(0x4, "dev", "bootcs0", V_98DX3236_PLUS)),
>> ++ MPP_VAR_FUNCTION(0x4, "dev", "bootcs", V_98DX3236_PLUS)),
>> + MPP_MODE(6,
>> + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
>> + MPP_VAR_FUNCTION(0x2, "sd0", "clk", V_98DX4251),
>> @@ -563,7 +525,8 @@
>> + MPP_VAR_FUNCTION(0x3, "uart1", "txd", V_98DX3236_PLUS)),
>> + MPP_MODE(19,
>> + MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
>> -+ MPP_VAR_FUNCTION(0x3, "uart1", "rxd", V_98DX3236_PLUS)),
>> ++ MPP_VAR_FUNCTION(0x3, "uart1", "rxd", V_98DX3236_PLUS),
>> ++ MPP_VAR_FUNCTION(0x4, "dev", "rb", V_98DX3236_PLUS)),
>> + MPP_MODE(20,
>> + MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
>> + MPP_VAR_FUNCTION(0x4, "dev", "we0", V_98DX3236_PLUS)),
>> @@ -630,11 +593,11 @@
>> };
>>
>> +static struct mvebu_mpp_ctrl mv98dx3236_mpp_controls[] = {
>> -+ MPP_FUNC_CTRL(0, 32, NULL, armada_xp_mpp_ctrl),
>> ++ MPP_FUNC_CTRL(0, 32, NULL, mvebu_mmio_mpp_ctrl),
>> +};
>> +
>> +static struct pinctrl_gpio_range mv98dx3236_mpp_gpio_ranges[] = {
>> -+ MPP_GPIO_RANGE(0, 0, 0, 32),
>> ++ MPP_GPIO_RANGE(0, 0, 0, 32),
>> +};
>> +
>> static int armada_xp_pinctrl_suspend(struct platform_device *pdev,
>> @@ -767,7 +731,7 @@
>> +};
>> diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
>> new file mode 100644
>> -index 000000000000..4b7b2fe3b682
>> +index 000000000000..9461128fae24
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
>> +/*
>> @@ -785,17 +749,17 @@
>> + * published by the Free Software Foundation; either version 2 of the
>> + * License, or (at your option) any later version.
>> + *
>> -+ * This file is distributed in the hope that it will be useful
>> ++ * This file is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> -+ * Or, alternatively
>> ++ * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> -+ * restriction, including without limitation the rights to use
>> ++ * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> @@ -804,11 +768,11 @@
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> -+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
>> ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
>> ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> @@ -851,9 +815,9 @@
>> + MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
>> +
>> + /*
>> -+ * 98DX3236 has 1 x1 PCIe unit Gen2.0: One unit can be
>> ++ * 98DX3236 has 1 x1 PCIe unit Gen2.0
>> + */
>> -+ pcie-controller {
>> ++ pciec: pcie-controller at 82000000 {
>> + compatible = "marvell,armada-xp-pcie";
>> + status = "disabled";
>> + device_type = "pci";
>> @@ -870,7 +834,7 @@
>> + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
>> + 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */>;
>> +
>> -+ pcie at 1,0 {
>> ++ pcie1: pcie at 1,0 {
>> + device_type = "pci";
>> + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
>> + reg = <0x0800 0 0 0 0>;
>> @@ -967,7 +931,7 @@
>> + };
>> + };
>> +
>> -+ dfx-registers {
>> ++ dfxr: dfx-registers at ac000000 {
>> + compatible = "simple-bus";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> @@ -987,7 +951,7 @@
>> + };
>> + };
>> +
>> -+ switch {
>> ++ switch: switch at a8000000 {
>> + compatible = "simple-bus";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> @@ -1026,7 +990,7 @@
>> +};
>> diff --git a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
>> new file mode 100644
>> -index 000000000000..a9b0f47f8df9
>> +index 000000000000..e1580afdc260
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
>> +/*
>> @@ -1044,17 +1008,17 @@
>> + * published by the Free Software Foundation; either version 2 of the
>> + * License, or (at your option) any later version.
>> + *
>> -+ * This file is distributed in the hope that it will be useful
>> ++ * This file is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> -+ * Or, alternatively
>> ++ * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> -+ * restriction, including without limitation the rights to use
>> ++ * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> @@ -1063,16 +1027,16 @@
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> -+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
>> ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
>> ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> + *
>> -+ * Contains definitions specific to the 98dx3336 SoC that are not
>> ++ * Contains definitions specific to the 98dx3236 SoC that are not
>> + * common to all Armada XP SoCs.
>> + */
>> +
>> @@ -1107,7 +1071,7 @@
>> +};
>> diff --git a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
>> new file mode 100644
>> -index 000000000000..446e6e65ec59
>> +index 000000000000..4b0533a4ccb7
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
>> +/*
>> @@ -1125,17 +1089,17 @@
>> + * published by the Free Software Foundation; either version 2 of the
>> + * License, or (at your option) any later version.
>> + *
>> -+ * This file is distributed in the hope that it will be useful
>> ++ * This file is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> -+ * Or, alternatively
>> ++ * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> -+ * restriction, including without limitation the rights to use
>> ++ * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> @@ -1144,11 +1108,11 @@
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> -+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
>> ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
>> ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> @@ -1213,15 +1177,15 @@
>> diff --git a/arch/arm/boot/dts/db-dxbc2.dts b/arch/arm/boot/dts/db-dxbc2.dts
>> new file mode 100644
>> -index 000000000000..f56786cea5f8
>> +index 000000000000..a8130805074e
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/db-dxbc2.dts
>> +/*
>> @@ -1241,17 +1205,17 @@
>> + * published by the Free Software Foundation; either version 2 of the
>> + * License, or (at your option) any later version.
>> + *
>> -+ * This file is distributed in the hope that it will be useful
>> ++ * This file is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> -+ * Or, alternatively
>> ++ * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> -+ * restriction, including without limitation the rights to use
>> ++ * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> @@ -1260,11 +1224,11 @@
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> -+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
>> ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
>> ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> @@ -1295,66 +1259,58 @@
>> + reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
>> + };
>> +
>> -+ soc {
>> -+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
>> -+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
>> -+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
>> -+ MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
>> -+ MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
>> ++};
>> +
>> -+ devbus-bootcs {
>> -+ status = "okay";
>> ++&devbus_bootcs {
>> ++ status = "okay";
>> +
>> -+ /* Device Bus parameters are required */
>> ++ /* Device Bus parameters are required */
>> +
>> -+ /* Read parameters */
>> -+ devbus,bus-width = <16>;
>> -+ devbus,turn-off-ps = <60000>;
>> -+ devbus,badr-skew-ps = <0>;
>> -+ devbus,acc-first-ps = <124000>;
>> -+ devbus,acc-next-ps = <248000>;
>> -+ devbus,rd-setup-ps = <0>;
>> -+ devbus,rd-hold-ps = <0>;
>> -+
>> -+ /* Write parameters */
>> -+ devbus,sync-enable = <0>;
>> -+ devbus,wr-high-ps = <60000>;
>> -+ devbus,wr-low-ps = <60000>;
>> -+ devbus,ale-wr-ps = <60000>;
>> -+ };
>> ++ /* Read parameters */
>> ++ devbus,bus-width = <16>;
>> ++ devbus,turn-off-ps = <60000>;
>> ++ devbus,badr-skew-ps = <0>;
>> ++ devbus,acc-first-ps = <124000>;
>> ++ devbus,acc-next-ps = <248000>;
>> ++ devbus,rd-setup-ps = <0>;
>> ++ devbus,rd-hold-ps = <0>;
>> ++
>> ++ /* Write parameters */
>> ++ devbus,sync-enable = <0>;
>> ++ devbus,wr-high-ps = <60000>;
>> ++ devbus,wr-low-ps = <60000>;
>> ++ devbus,ale-wr-ps = <60000>;
>> ++};
>> +
>> -+ internal-regs {
>> -+ serial at 12000 {
>> -+ status = "okay";
>> -+ };
>> -+ serial at 12100 {
>> -+ status = "okay";
>> -+ };
>> ++&i2c0 {
>> ++ clock-frequency = <100000>;
>> ++ status = "okay";
>> ++};
>> +
>> -+ i2c at 11000 {
>> -+ clock-frequency = <100000>;
>> -+ status = "okay";
>> -+ };
>> ++&uart0 {
>> ++ status = "okay";
>> ++};
>> +
>> -+ mvsdio at d4000 {
>> -+ pinctrl-0 = <&sdio_pins>;
>> -+ pinctrl-names = "default";
>> -+ status = "okay";
>> -+ /* No CD or WP GPIOs */
>> -+ broken-cd;
>> -+ };
>> ++&uart1 {
>> ++ status = "okay";
>> ++};
>> +
>> -+ nand at d0000 {
>> -+ status = "okay";
>> -+ num-cs = <1>;
>> -+ marvell,nand-keep-config;
>> -+ marvell,nand-enable-arbiter;
>> -+ nand-on-flash-bbt;
>> -+ nand-ecc-strength = <4>;
>> -+ nand-ecc-step-size = <512>;
>> -+ };
>> -+ };
>> -+ };
>> ++&nand {
>> ++ status = "okay";
>> ++ num-cs = <1>;
>> ++ marvell,nand-keep-config;
>> ++ marvell,nand-enable-arbiter;
>> ++ nand-on-flash-bbt;
>> ++ nand-ecc-strength = <4>;
>> ++ nand-ecc-step-size = <512>;
>> ++};
>> ++
>> ++&sdio {
>> ++ pinctrl-0 = <&sdio_pins>;
>> ++ pinctrl-names = "default";
>> ++ status = "okay";
>> ++ /* No CD or WP GPIOs */
>> ++ broken-cd;
>> +};
>> +
>> +&spi0 {
>> @@ -1385,7 +1341,7 @@
>> +};
>> diff --git a/arch/arm/boot/dts/db-xc3-24g4xg.dts b/arch/arm/boot/dts/db-xc3-24g4xg.dts
>> new file mode 100644
>> -index 000000000000..5eb89ffb9a7d
>> +index 000000000000..4e07cb6ed800
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/db-xc3-24g4xg.dts
>> +/*
>> @@ -1405,17 +1361,17 @@
>> + * published by the Free Software Foundation; either version 2 of the
>> + * License, or (at your option) any later version.
>> + *
>> -+ * This file is distributed in the hope that it will be useful
>> ++ * This file is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> -+ * Or, alternatively
>> ++ * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> -+ * restriction, including without limitation the rights to use
>> ++ * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> @@ -1424,11 +1380,11 @@
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> -+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
>> ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
>> ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> @@ -1458,63 +1414,50 @@
>> + device_type = "memory";
>> + reg = <0 0x00000000 0 0x40000000>; /* 1 GB */
>> + };
>> ++};
>> +
>> -+ soc {
>> -+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
>> -+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
>> -+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
>> -+ MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
>> -+ MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
>> -+
>> -+ devbus-bootcs {
>> -+ status = "okay";
>> ++&devbus_bootcs {
>> ++ status = "okay";
>> +
>> -+ /* Device Bus parameters are required */
>> ++ /* Device Bus parameters are required */
>> +
>> -+ /* Read parameters */
>> -+ devbus,bus-width = <16>;
>> -+ devbus,turn-off-ps = <60000>;
>> -+ devbus,badr-skew-ps = <0>;
>> -+ devbus,acc-first-ps = <124000>;
>> -+ devbus,acc-next-ps = <248000>;
>> -+ devbus,rd-setup-ps = <0>;
>> -+ devbus,rd-hold-ps = <0>;
>> -+
>> -+ /* Write parameters */
>> -+ devbus,sync-enable = <0>;
>> -+ devbus,wr-high-ps = <60000>;
>> -+ devbus,wr-low-ps = <60000>;
>> -+ devbus,ale-wr-ps = <60000>;
>> -+ };
>> ++ /* Read parameters */
>> ++ devbus,bus-width = <16>;
>> ++ devbus,turn-off-ps = <60000>;
>> ++ devbus,badr-skew-ps = <0>;
>> ++ devbus,acc-first-ps = <124000>;
>> ++ devbus,acc-next-ps = <248000>;
>> ++ devbus,rd-setup-ps = <0>;
>> ++ devbus,rd-hold-ps = <0>;
>> ++
>> ++ /* Write parameters */
>> ++ devbus,sync-enable = <0>;
>> ++ devbus,wr-high-ps = <60000>;
>> ++ devbus,wr-low-ps = <60000>;
>> ++ devbus,ale-wr-ps = <60000>;
>> ++};
>> +
>> -+ internal-regs {
>> -+ serial at 12000 {
>> -+ status = "okay";
>> -+ };
>> -+ serial at 12100 {
>> -+ status = "okay";
>> -+ };
>> ++&uart0 {
>> ++ status = "okay";
>> ++};
>> +
>> -+ i2c at 11000 {
>> -+ clock-frequency = <100000>;
>> -+ status = "okay";
>> -+ };
>> ++&uart1 {
>> ++ status = "okay";
>> ++};
>> +
>> -+ mvsdio at d4000 {
>> -+ status = "disabled";
>> -+ };
>> ++&i2c0 {
>> ++ clock-frequency = <100000>;
>> ++ status = "okay";
>> ++};
>> +
>> -+ nand at d0000 {
>> -+ status = "okay";
>> -+ num-cs = <1>;
>> -+ marvell,nand-keep-config;
>> -+ marvell,nand-enable-arbiter;
>> -+ nand-on-flash-bbt;
>> -+ nand-ecc-strength = <4>;
>> -+ nand-ecc-step-size = <512>;
>> -+ };
>> -+ };
>> -+ };
>> ++&nand {
>> ++ status = "okay";
>> ++ num-cs = <1>;
>> ++ marvell,nand-keep-config;
>> ++ marvell,nand-enable-arbiter;
>> ++ nand-on-flash-bbt;
>> ++ nand-ecc-strength = <4>;
>> ++ nand-ecc-step-size = <512>;
>> +};
>> +
>> +&spi0 {
>>
>> --
>> 2.11.0.24.ge6920cf
>>
>
> --
> Gregory Clement, Free Electrons
> Kernel, drivers, real-time and embedded Linux
> development, consulting, training and support.
> http://free-electrons.com
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
next prev parent reply other threads:[~2017-01-27 16:49 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-27 3:25 [PATCHv5 0/5] Support for Marvell switches with integrated CPUs Chris Packham
2017-01-27 3:25 ` Chris Packham
2017-01-27 3:25 ` Chris Packham
2017-01-27 3:25 ` [PATCHv5 1/5] clk: mvebu: support for 98DX3236 SoC Chris Packham
2017-01-27 3:25 ` Chris Packham
2017-01-27 18:48 ` Stephen Boyd
2017-01-27 18:48 ` Stephen Boyd
2017-01-27 18:48 ` Stephen Boyd
2017-01-27 3:25 ` [PATCHv5 2/5] arm: mvebu: support for SMP on 98DX3336 SoC Chris Packham
2017-01-27 3:25 ` Chris Packham
2017-01-27 14:06 ` Gregory CLEMENT
2017-01-27 14:06 ` Gregory CLEMENT
2017-01-27 14:06 ` Gregory CLEMENT
2017-01-27 3:25 ` [PATCHv5 3/5] pinctrl: mvebu: pinctrl driver for 98DX3236 SoC Chris Packham
2017-01-27 3:25 ` Chris Packham
2017-01-27 3:25 ` [PATCHv5 4/5] arm: mvebu: Add device tree for 98DX3236 SoCs Chris Packham
2017-01-27 3:25 ` Chris Packham
2017-01-27 3:25 ` Chris Packham
2017-01-27 3:25 ` [PATCHv5 5/5] arm: mvebu: Add device tree for db-dxbc2 and db-xc3-24g4xg boards Chris Packham
2017-01-27 3:25 ` Chris Packham
2017-01-27 3:25 ` Chris Packham
2017-01-27 16:48 ` Gregory CLEMENT
2017-01-27 16:48 ` Gregory CLEMENT
2017-01-27 16:39 ` [PATCHv5 0/5] Support for Marvell switches with integrated CPUs Gregory CLEMENT
2017-01-27 16:39 ` Gregory CLEMENT
2017-01-27 16:39 ` Gregory CLEMENT
2017-01-27 16:39 ` Gregory CLEMENT
2017-01-27 16:49 ` Gregory CLEMENT [this message]
2017-01-27 16:49 ` Gregory CLEMENT
2017-01-27 16:49 ` Gregory CLEMENT
2017-01-27 16:49 ` Gregory CLEMENT
2017-01-27 18:47 ` Stephen Boyd
2017-01-27 18:47 ` Stephen Boyd
2017-01-27 18:47 ` Stephen Boyd
2017-01-29 20:30 ` Chris Packham
2017-01-29 20:30 ` Chris Packham
2017-01-29 20:30 ` Chris Packham
2017-01-29 20:30 ` Chris Packham
2017-01-30 14:40 ` Gregory CLEMENT
2017-01-30 14:40 ` Gregory CLEMENT
2017-01-30 14:40 ` Gregory CLEMENT
2017-01-30 14:40 ` Gregory CLEMENT
2017-01-30 20:27 ` Chris Packham
2017-01-30 20:27 ` Chris Packham
2017-01-30 20:27 ` Chris Packham
2017-01-30 20:27 ` Chris Packham
2017-01-29 23:20 Chris Packham
2017-01-29 23:20 ` Chris Packham
2017-01-29 23:20 ` Chris Packham
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87o9yswiqw.fsf@free-electrons.com \
--to=gregory.clement@free-electrons.com \
--cc=andrew@lunn.ch \
--cc=arnd@arndb.de \
--cc=chris.brand@broadcom.com \
--cc=chris.packham@alliedtelesis.co.nz \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=geert+renesas@glider.be \
--cc=jason@lakedaemon.net \
--cc=juri.lelli@arm.com \
--cc=ldewangan@nvidia.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=treding@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.