ath10k-firmware: QCA4019 hw1.0: add GL.iNet GL-B2200 specific board files

ath10k-firmware: QCA4019 hw1.0: add GL.iNet GL-B2200 specific board files

[Enrico Mioso]

[-- Attachment #1: Type: text/plain, Size: 1263 bytes --]

Hello all!!

I would like to add some board files for a device that was added a while ago to OpenWRt - the GL.iNet GL-B2200 mesh router. The device sports 3 Wi-Fi interfacesand currently uses the three board files I am submitting.
To facilitate integration, this message contains only the IPQ4019 related files. the QCA9888v2 will be sent in a separate message.

* Hardware description:

This device seems based on IPQ4019 / AP-DK04.1-C3.
The board files in this message cover the follwoing radio interfaces on the device:
- one QCA4019 radio is used for 2.4 GHZ operation
- one QCA4019 radio is used for 5 GHZ for operating on lower part of 5 GHZ spectrum

* origin of the board files:

These board files where provided by the manifacturer, who provided the original patch to support the device in OpenWrt.

* ids to be used with the board files

+ bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=GL-B2200
SHA256: bffec2b99a98ff1d2f842217ef0478c1714f9ea7f42791c2b2f47d9ed1342db6
+ bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=GL-B2200
SHA256: 952e47bae3c8b949926b75c8471fb60dffcceefec5914c0d646a8b361df79d05

* attached files:

The names of the files are equal to the ID strings in the board-2.bin files, minus the .bin extension of course.

Kind regards,

Enrico

[-- Attachment #2: Type: application/octet-stream, Size: 12064 bytes --]

[-- Attachment #3: Type: application/octet-stream, Size: 12064 bytes --]

[-- Attachment #4: Type: text/plain, Size: 146 bytes --]

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: ath10k-firmware: QCA4019 hw1.0: add GL.iNet GL-B2200 specific board files

[Kalle Valo]

Enrico Mioso <mrkiko.rs@gmail.com> writes:

> I would like to add some board files for a device that was added a
> while ago to OpenWRt - the GL.iNet GL-B2200 mesh router. The device
> sports 3 Wi-Fi interfacesand currently uses the three board files I am
> submitting.
> To facilitate integration, this message contains only the IPQ4019
> related files. the QCA9888v2 will be sent in a separate message.
>
> * Hardware description:
>
> This device seems based on IPQ4019 / AP-DK04.1-C3.
> The board files in this message cover the follwoing radio interfaces on the device:
> - one QCA4019 radio is used for 2.4 GHZ operation
> - one QCA4019 radio is used for 5 GHZ for operating on lower part of 5 GHZ spectrum
>
> * origin of the board files:
>
> These board files where provided by the manifacturer, who provided the
> original patch to support the device in OpenWrt.
>
> * ids to be used with the board files
>
> + bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=GL-B2200
> SHA256: bffec2b99a98ff1d2f842217ef0478c1714f9ea7f42791c2b2f47d9ed1342db6
> + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=GL-B2200
> SHA256: 952e47bae3c8b949926b75c8471fb60dffcceefec5914c0d646a8b361df79d05
>
> * attached files:
>
> The names of the files are equal to the ID strings in the board-2.bin
> files, minus the .bin extension of course.

Thanks, added to QCA4019/hw1.0/board-2.bin:

New:
bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=GL-B2200
bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=GL-B2200

Changed:


Deleted:

2 board image(s) added, 0 changed, 0 deleted, 95 in total

https://github.com/kvalo/ath10k-firmware/commit/bf58f64205ddd247dcaf5278f73c41babf98124d

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k