* [PATCH] [ARM] orion5x: fix typos in comments
@ 2022-03-18 10:36 ` Julia Lawall
0 siblings, 0 replies; 4+ messages in thread
From: Julia Lawall @ 2022-03-18 10:36 UTC (permalink / raw)
To: Andrew Lunn
Cc: kernel-janitors, Sebastian Hesselbarth, Gregory Clement,
Russell King, linux-arm-kernel, linux-kernel
Various spelling mistakes in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
---
arch/arm/mach-orion5x/dns323-setup.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 87cb47220e82..d69259b6b60d 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -696,12 +696,12 @@ static void __init dns323_init(void)
pr_err("DNS-323: failed to setup power-off GPIO\n");
pm_power_off = dns323c_power_off;
- /* Now, -this- should theorically be done by the sata_mv driver
+ /* Now, -this- should theoretically be done by the sata_mv driver
* once I figure out what's going on there. Maybe the behaviour
* of the LEDs should be somewhat passed via the platform_data.
* for now, just whack the register and make the LEDs happy
*
- * Note: AFAIK, rev B1 needs the same treatement but I'll let
+ * Note: AFAIK, rev B1 needs the same treatment but I'll let
* somebody else test it.
*/
writel(0x5, ORION5X_SATA_VIRT_BASE + 0x2c);
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH] [ARM] orion5x: fix typos in comments
@ 2022-03-18 10:36 ` Julia Lawall
0 siblings, 0 replies; 4+ messages in thread
From: Julia Lawall @ 2022-03-18 10:36 UTC (permalink / raw)
To: Andrew Lunn
Cc: kernel-janitors, Sebastian Hesselbarth, Gregory Clement,
Russell King, linux-arm-kernel, linux-kernel
Various spelling mistakes in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
---
arch/arm/mach-orion5x/dns323-setup.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 87cb47220e82..d69259b6b60d 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -696,12 +696,12 @@ static void __init dns323_init(void)
pr_err("DNS-323: failed to setup power-off GPIO\n");
pm_power_off = dns323c_power_off;
- /* Now, -this- should theorically be done by the sata_mv driver
+ /* Now, -this- should theoretically be done by the sata_mv driver
* once I figure out what's going on there. Maybe the behaviour
* of the LEDs should be somewhat passed via the platform_data.
* for now, just whack the register and make the LEDs happy
*
- * Note: AFAIK, rev B1 needs the same treatement but I'll let
+ * Note: AFAIK, rev B1 needs the same treatment but I'll let
* somebody else test it.
*/
writel(0x5, ORION5X_SATA_VIRT_BASE + 0x2c);
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] [ARM] orion5x: fix typos in comments
2022-03-18 10:36 ` Julia Lawall
@ 2022-05-09 8:37 ` Gregory CLEMENT
-1 siblings, 0 replies; 4+ messages in thread
From: Gregory CLEMENT @ 2022-05-09 8:37 UTC (permalink / raw)
To: Julia Lawall, Andrew Lunn
Cc: kernel-janitors, Sebastian Hesselbarth, Russell King,
linux-arm-kernel, linux-kernel
Julia Lawall <Julia.Lawall@inria.fr> writes:
> Various spelling mistakes in comments.
> Detected with the help of Coccinelle.
>
> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Applied on mvebu/arm
Thanks,
Gregory
>
> ---
> arch/arm/mach-orion5x/dns323-setup.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
> index 87cb47220e82..d69259b6b60d 100644
> --- a/arch/arm/mach-orion5x/dns323-setup.c
> +++ b/arch/arm/mach-orion5x/dns323-setup.c
> @@ -696,12 +696,12 @@ static void __init dns323_init(void)
> pr_err("DNS-323: failed to setup power-off GPIO\n");
> pm_power_off = dns323c_power_off;
>
> - /* Now, -this- should theorically be done by the sata_mv driver
> + /* Now, -this- should theoretically be done by the sata_mv driver
> * once I figure out what's going on there. Maybe the behaviour
> * of the LEDs should be somewhat passed via the platform_data.
> * for now, just whack the register and make the LEDs happy
> *
> - * Note: AFAIK, rev B1 needs the same treatement but I'll let
> + * Note: AFAIK, rev B1 needs the same treatment but I'll let
> * somebody else test it.
> */
> writel(0x5, ORION5X_SATA_VIRT_BASE + 0x2c);
>
--
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] [ARM] orion5x: fix typos in comments
@ 2022-05-09 8:37 ` Gregory CLEMENT
0 siblings, 0 replies; 4+ messages in thread
From: Gregory CLEMENT @ 2022-05-09 8:37 UTC (permalink / raw)
To: Julia Lawall, Andrew Lunn
Cc: kernel-janitors, Sebastian Hesselbarth, Russell King,
linux-arm-kernel, linux-kernel
Julia Lawall <Julia.Lawall@inria.fr> writes:
> Various spelling mistakes in comments.
> Detected with the help of Coccinelle.
>
> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Applied on mvebu/arm
Thanks,
Gregory
>
> ---
> arch/arm/mach-orion5x/dns323-setup.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
> index 87cb47220e82..d69259b6b60d 100644
> --- a/arch/arm/mach-orion5x/dns323-setup.c
> +++ b/arch/arm/mach-orion5x/dns323-setup.c
> @@ -696,12 +696,12 @@ static void __init dns323_init(void)
> pr_err("DNS-323: failed to setup power-off GPIO\n");
> pm_power_off = dns323c_power_off;
>
> - /* Now, -this- should theorically be done by the sata_mv driver
> + /* Now, -this- should theoretically be done by the sata_mv driver
> * once I figure out what's going on there. Maybe the behaviour
> * of the LEDs should be somewhat passed via the platform_data.
> * for now, just whack the register and make the LEDs happy
> *
> - * Note: AFAIK, rev B1 needs the same treatement but I'll let
> + * Note: AFAIK, rev B1 needs the same treatment but I'll let
> * somebody else test it.
> */
> writel(0x5, ORION5X_SATA_VIRT_BASE + 0x2c);
>
--
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2022-05-09 8:57 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-03-18 10:36 [PATCH] [ARM] orion5x: fix typos in comments Julia Lawall
2022-03-18 10:36 ` Julia Lawall
2022-05-09 8:37 ` Gregory CLEMENT
2022-05-09 8:37 ` Gregory CLEMENT
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.