* [Buildroot] [PATCH] configs/qemu: bump to the latest kernel version
@ 2016-10-13 13:02 Gustavo Zacarias
2016-10-13 19:45 ` Peter Korsgaard
0 siblings, 1 reply; 6+ messages in thread
From: Gustavo Zacarias @ 2016-10-13 13:02 UTC (permalink / raw)
To: buildroot
Drop m68k-mcf5208 kernel patch since it's upstream.
Also bump the pc samples since they're tied to the (base) qemu config.
Results table:
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.8.1 2.6.0 YES OK (3)
arm_versatile 4.8.1 2.5.0 YES OK
arm_vexpress 4.8.1 2.5.0 YES OK
m68k_mcf5208 4.8.1 2.5.0 YES OK
m68k_q800 4.8.1 q800-v2.4.0 NO (2) OK
microblazebe 4.8.1 2.5.0 YES OK
microblazeel 4.8.1 2.5.0 YES OK
mips32r2el_malta 4.8.1 2.5.0 YES OK
mips32r2_malta 4.8.1 2.5.0 YES OK
mips32r6el_malta 4.8.1 2.6.0 YES OK (3)
mips32r6_malta 4.8.1 2.6.0 YES OK (3)
mips64el_malta 4.8.1 2.5.0 YES OK
mips64_malta 4.8.1 2.5.0 YES OK
mips64r6el_malta 4.8.1 2.7.0 YES OK (3)(4)
mips64r6_malta 4.8.1 2.7.0 YES OK (3)(4)
ppc_g3beige 4.8.1 2.5.0 YES OK
ppc_mpc8544ds 4.8.1 2.5.0 YES OK
ppc_virtex_ml507 4.8.1 2.5.0 NO OK
ppc64_pseries 4.8.1 2.5.0 YES OK
sh4 4.8.1 2.5.0 YES OK
sh4eb 4.8.1 2.5.0 NO (1) OK
sparc_ss10 4.8.1 2.5.0 YES OK
sparc64_sun4u 4.8.1 2.5.0 YES OK
sparc_sun4u 4.8.1 2.5.0 YES OK
x86 4.8.1 2.5.0 YES OK
x86_64 4.8.1 2.5.0 YES OK
xtensa_lx60 4.8.1 2.6.0 YES OK
xtensa_lx60_nommu 4.8.1 2.6.0 YES OK
(1) - Probably an endian issue with 8139 emulation/driver
(2) - There's a network interface, but enabling it in qemu fails
(3) - Known to fail with qemu versions lower than 2.6.0
(4) - Might work with 2.6.0, but the cpu definition changed in 2.7.0
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
---
.../{linux-4.7.config => linux-4.8.config} | 0
.../{linux-4.7.config => linux-4.8.config} | 0
.../{linux-4.7.config => linux-4.8.config} | 0
.../patches/linux/m68knommu-fix-signal.patch | 45 ----------------------
.../{linux-4.7.config => linux-4.8.config} | 0
.../{linux-4.7.config => linux-4.8.config} | 0
.../{linux-4.7.config => linux-4.8.config} | 0
.../{linux-4.7.config => linux-4.8.config} | 0
.../{linux-4.7.config => linux-4.8.config} | 0
.../linux-4.8.config} | 0
.../linux-4.8.config} | 0
.../{linux-4.7.config => linux-4.8.config} | 0
.../{linux-4.7.config => linux-4.8.config} | 0
.../linux-4.8.config} | 0
board/qemu/mips64r6-malta/readme.txt | 7 +++-
.../linux-4.8.config} | 0
board/qemu/mips64r6el-malta/readme.txt | 5 ++-
.../{linux-4.7.config => linux-4.8.config} | 0
.../{linux-4.7.config => linux-4.8.config} | 0
.../{linux-4.7.config => linux-4.8.config} | 0
.../sh4-r2d/{linux-4.7.config => linux-4.8.config} | 0
.../{linux-4.7.config => linux-4.8.config} | 0
.../{linux-4.7.config => linux-4.8.config} | 0
.../{linux-4.7.config => linux-4.8.config} | 0
board/qemu/x86/linux-4.7.config | 1 -
board/qemu/x86/linux-4.8.config | 1 +
.../x86_64/{linux-4.7.config => linux-4.8.config} | 0
...nux-4.7-nommu.config => linux-4.8-nommu.config} | 0
.../{linux-4.7.config => linux-4.8.config} | 0
configs/pc_x86_64_bios_defconfig | 8 ++--
configs/pc_x86_64_efi_defconfig | 8 ++--
configs/qemu_aarch64_virt_defconfig | 8 ++--
configs/qemu_arm_versatile_defconfig | 8 ++--
configs/qemu_arm_vexpress_defconfig | 6 +--
configs/qemu_m68k_mcf5208_defconfig | 10 ++---
configs/qemu_m68k_q800_defconfig | 8 ++--
configs/qemu_microblazebe_mmu_defconfig | 8 ++--
configs/qemu_microblazeel_mmu_defconfig | 8 ++--
configs/qemu_mips32r2_malta_defconfig | 8 ++--
configs/qemu_mips32r2el_malta_defconfig | 8 ++--
configs/qemu_mips32r6_malta_defconfig | 8 ++--
configs/qemu_mips32r6el_malta_defconfig | 8 ++--
configs/qemu_mips64_malta_defconfig | 8 ++--
configs/qemu_mips64el_malta_defconfig | 8 ++--
configs/qemu_mips64r6_malta_defconfig | 8 ++--
configs/qemu_mips64r6el_malta_defconfig | 8 ++--
configs/qemu_ppc64_pseries_defconfig | 6 +--
configs/qemu_ppc_g3beige_defconfig | 8 ++--
configs/qemu_ppc_mpc8544ds_defconfig | 8 ++--
configs/qemu_ppc_virtex_ml507_defconfig | 8 ++--
configs/qemu_sh4_r2d_defconfig | 8 ++--
configs/qemu_sh4eb_r2d_defconfig | 8 ++--
configs/qemu_sparc64_sun4u_defconfig | 8 ++--
configs/qemu_sparc_ss10_defconfig | 8 ++--
configs/qemu_x86_64_defconfig | 8 ++--
configs/qemu_x86_defconfig | 8 ++--
configs/qemu_xtensa_lx60_defconfig | 8 ++--
configs/qemu_xtensa_lx60_nommu_defconfig | 8 ++--
58 files changed, 124 insertions(+), 165 deletions(-)
rename board/qemu/aarch64-virt/{linux-4.7.config => linux-4.8.config} (100%)
rename board/qemu/arm-versatile/{linux-4.7.config => linux-4.8.config} (100%)
rename board/qemu/m68k-mcf5208/{linux-4.7.config => linux-4.8.config} (100%)
delete mode 100644 board/qemu/m68k-mcf5208/patches/linux/m68knommu-fix-signal.patch
rename board/qemu/m68k-q800/{linux-4.7.config => linux-4.8.config} (100%)
rename board/qemu/microblazebe-mmu/{linux-4.7.config => linux-4.8.config} (100%)
rename board/qemu/microblazeel-mmu/{linux-4.7.config => linux-4.8.config} (100%)
rename board/qemu/mips32r2-malta/{linux-4.7.config => linux-4.8.config} (100%)
rename board/qemu/mips32r2el-malta/{linux-4.7.config => linux-4.8.config} (100%)
rename board/qemu/{mips32r6el-malta/linux-4.7.config => mips32r6-malta/linux-4.8.config} (100%)
rename board/qemu/{mips32r6-malta/linux-4.7.config => mips32r6el-malta/linux-4.8.config} (100%)
rename board/qemu/mips64-malta/{linux-4.7.config => linux-4.8.config} (100%)
rename board/qemu/mips64el-malta/{linux-4.7.config => linux-4.8.config} (100%)
rename board/qemu/{mips64r6el-malta/linux-4.7.config => mips64r6-malta/linux-4.8.config} (100%)
rename board/qemu/{mips64r6-malta/linux-4.7.config => mips64r6el-malta/linux-4.8.config} (100%)
rename board/qemu/ppc-g3beige/{linux-4.7.config => linux-4.8.config} (100%)
rename board/qemu/ppc-mpc8544ds/{linux-4.7.config => linux-4.8.config} (100%)
rename board/qemu/ppc-virtex-ml507/{linux-4.7.config => linux-4.8.config} (100%)
rename board/qemu/sh4-r2d/{linux-4.7.config => linux-4.8.config} (100%)
rename board/qemu/sh4eb-r2d/{linux-4.7.config => linux-4.8.config} (100%)
rename board/qemu/sparc-ss10/{linux-4.7.config => linux-4.8.config} (100%)
rename board/qemu/sparc64-sun4u/{linux-4.7.config => linux-4.8.config} (100%)
delete mode 120000 board/qemu/x86/linux-4.7.config
create mode 120000 board/qemu/x86/linux-4.8.config
rename board/qemu/x86_64/{linux-4.7.config => linux-4.8.config} (100%)
rename board/qemu/xtensa-lx60/{linux-4.7-nommu.config => linux-4.8-nommu.config} (100%)
rename board/qemu/xtensa-lx60/{linux-4.7.config => linux-4.8.config} (100%)
diff --git a/board/qemu/aarch64-virt/linux-4.7.config b/board/qemu/aarch64-virt/linux-4.8.config
similarity index 100%
rename from board/qemu/aarch64-virt/linux-4.7.config
rename to board/qemu/aarch64-virt/linux-4.8.config
diff --git a/board/qemu/arm-versatile/linux-4.7.config b/board/qemu/arm-versatile/linux-4.8.config
similarity index 100%
rename from board/qemu/arm-versatile/linux-4.7.config
rename to board/qemu/arm-versatile/linux-4.8.config
diff --git a/board/qemu/m68k-mcf5208/linux-4.7.config b/board/qemu/m68k-mcf5208/linux-4.8.config
similarity index 100%
rename from board/qemu/m68k-mcf5208/linux-4.7.config
rename to board/qemu/m68k-mcf5208/linux-4.8.config
diff --git a/board/qemu/m68k-mcf5208/patches/linux/m68knommu-fix-signal.patch b/board/qemu/m68k-mcf5208/patches/linux/m68knommu-fix-signal.patch
deleted file mode 100644
index b56994b..0000000
--- a/board/qemu/m68k-mcf5208/patches/linux/m68knommu-fix-signal.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-m68knommu: fix user a5 register being overwritten
-
-On no-MMU systems the application a5 register can be overwitten with the
-address of the process data segment when processing application signals.
-For flat format applications compiled with full absolute relocation this
-effectively corrupts the a5 register on signal processing - and this very
-quickly leads to process crash and often takes out the whole system with
-a panic as well.
-
-This has no effect on flat format applications compiled with the more
-common PIC methods (such as -msep-data). These format applications reserve
-a5 for the pointer to the data segment anyway - so it doesn't change it.
-
-A long time ago the a5 register was used in the code packed into the user
-stack to enable signal return processing. And so it had to be restored on
-end of signal cleanup processing back to the original a5 user value. This
-was historically done by saving away a5 in the sigcontext structure. At
-some point (a long time back it seems) the a5 restore process was changed
-and it was hard coded to put the user data segment address directly into a5.
-Which is ok for the common PIC compiled application case, but breaks the
-full relocation application code.
-
-We no longer use this type of signal handling mechanism and so we don't
-need to do anything special to save and restore a5 at all now. So remove the
-code that hard codes a5 to the address of the user data segment.
-
-Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
----
- arch/m68k/kernel/signal.c | 1 -
- 1 file changed, 1 deletion(-)
-
-diff --git a/arch/m68k/kernel/signal.c b/arch/m68k/kernel/signal.c
-index 2dcee3a..9202f82 100644
---- a/arch/m68k/kernel/signal.c
-+++ b/arch/m68k/kernel/signal.c
-@@ -213,7 +213,6 @@ static inline int frame_extra_sizes(int f)
-
- static inline void adjustformat(struct pt_regs *regs)
- {
-- ((struct switch_stack *)regs - 1)->a5 = current->mm->start_data;
- /*
- * set format byte to make stack appear modulo 4, which it will
- * be when doing the rte
---
-1.9.1
diff --git a/board/qemu/m68k-q800/linux-4.7.config b/board/qemu/m68k-q800/linux-4.8.config
similarity index 100%
rename from board/qemu/m68k-q800/linux-4.7.config
rename to board/qemu/m68k-q800/linux-4.8.config
diff --git a/board/qemu/microblazebe-mmu/linux-4.7.config b/board/qemu/microblazebe-mmu/linux-4.8.config
similarity index 100%
rename from board/qemu/microblazebe-mmu/linux-4.7.config
rename to board/qemu/microblazebe-mmu/linux-4.8.config
diff --git a/board/qemu/microblazeel-mmu/linux-4.7.config b/board/qemu/microblazeel-mmu/linux-4.8.config
similarity index 100%
rename from board/qemu/microblazeel-mmu/linux-4.7.config
rename to board/qemu/microblazeel-mmu/linux-4.8.config
diff --git a/board/qemu/mips32r2-malta/linux-4.7.config b/board/qemu/mips32r2-malta/linux-4.8.config
similarity index 100%
rename from board/qemu/mips32r2-malta/linux-4.7.config
rename to board/qemu/mips32r2-malta/linux-4.8.config
diff --git a/board/qemu/mips32r2el-malta/linux-4.7.config b/board/qemu/mips32r2el-malta/linux-4.8.config
similarity index 100%
rename from board/qemu/mips32r2el-malta/linux-4.7.config
rename to board/qemu/mips32r2el-malta/linux-4.8.config
diff --git a/board/qemu/mips32r6el-malta/linux-4.7.config b/board/qemu/mips32r6-malta/linux-4.8.config
similarity index 100%
rename from board/qemu/mips32r6el-malta/linux-4.7.config
rename to board/qemu/mips32r6-malta/linux-4.8.config
diff --git a/board/qemu/mips32r6-malta/linux-4.7.config b/board/qemu/mips32r6el-malta/linux-4.8.config
similarity index 100%
rename from board/qemu/mips32r6-malta/linux-4.7.config
rename to board/qemu/mips32r6el-malta/linux-4.8.config
diff --git a/board/qemu/mips64-malta/linux-4.7.config b/board/qemu/mips64-malta/linux-4.8.config
similarity index 100%
rename from board/qemu/mips64-malta/linux-4.7.config
rename to board/qemu/mips64-malta/linux-4.8.config
diff --git a/board/qemu/mips64el-malta/linux-4.7.config b/board/qemu/mips64el-malta/linux-4.8.config
similarity index 100%
rename from board/qemu/mips64el-malta/linux-4.7.config
rename to board/qemu/mips64el-malta/linux-4.8.config
diff --git a/board/qemu/mips64r6el-malta/linux-4.7.config b/board/qemu/mips64r6-malta/linux-4.8.config
similarity index 100%
rename from board/qemu/mips64r6el-malta/linux-4.7.config
rename to board/qemu/mips64r6-malta/linux-4.8.config
diff --git a/board/qemu/mips64r6-malta/readme.txt b/board/qemu/mips64r6-malta/readme.txt
index 8f792a0..4a6c5fe 100644
--- a/board/qemu/mips64r6-malta/readme.txt
+++ b/board/qemu/mips64r6-malta/readme.txt
@@ -1,7 +1,10 @@
Run the emulation with:
- qemu-system-mips64 -M malta -cpu MIPS64R6-generic -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "root=/dev/hda" -nographic
+ qemu-system-mips64 -M malta -cpu I6400 -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "root=/dev/hda" -nographic
The login prompt will appear in the terminal that started Qemu.
-Tested with QEMU 2.6.0
+Tested with QEMU 2.7.0
+
+Might work with 2.6.0 by changing the -cpu entry to MIPS64R6-generic
+since the naming was updated and the old name removed in 2.7.0
diff --git a/board/qemu/mips64r6-malta/linux-4.7.config b/board/qemu/mips64r6el-malta/linux-4.8.config
similarity index 100%
rename from board/qemu/mips64r6-malta/linux-4.7.config
rename to board/qemu/mips64r6el-malta/linux-4.8.config
diff --git a/board/qemu/mips64r6el-malta/readme.txt b/board/qemu/mips64r6el-malta/readme.txt
index 3459a87..b1dc23a 100644
--- a/board/qemu/mips64r6el-malta/readme.txt
+++ b/board/qemu/mips64r6el-malta/readme.txt
@@ -1,7 +1,10 @@
Run the emulation with:
- qemu-system-mips64el -M malta -cpu MIPS64R6-generic -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "root=/dev/hda" -nographic
+ qemu-system-mips64el -M malta -cpu I6400 -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "root=/dev/hda" -nographic
The login prompt will appear in the terminal that started Qemu.
Tested with QEMU 2.6.0
+
+Might work with 2.6.0 by changing the -cpu entry to MIPS64R6-generic
+since the naming was updated and the old name removed in 2.7.0
diff --git a/board/qemu/ppc-g3beige/linux-4.7.config b/board/qemu/ppc-g3beige/linux-4.8.config
similarity index 100%
rename from board/qemu/ppc-g3beige/linux-4.7.config
rename to board/qemu/ppc-g3beige/linux-4.8.config
diff --git a/board/qemu/ppc-mpc8544ds/linux-4.7.config b/board/qemu/ppc-mpc8544ds/linux-4.8.config
similarity index 100%
rename from board/qemu/ppc-mpc8544ds/linux-4.7.config
rename to board/qemu/ppc-mpc8544ds/linux-4.8.config
diff --git a/board/qemu/ppc-virtex-ml507/linux-4.7.config b/board/qemu/ppc-virtex-ml507/linux-4.8.config
similarity index 100%
rename from board/qemu/ppc-virtex-ml507/linux-4.7.config
rename to board/qemu/ppc-virtex-ml507/linux-4.8.config
diff --git a/board/qemu/sh4-r2d/linux-4.7.config b/board/qemu/sh4-r2d/linux-4.8.config
similarity index 100%
rename from board/qemu/sh4-r2d/linux-4.7.config
rename to board/qemu/sh4-r2d/linux-4.8.config
diff --git a/board/qemu/sh4eb-r2d/linux-4.7.config b/board/qemu/sh4eb-r2d/linux-4.8.config
similarity index 100%
rename from board/qemu/sh4eb-r2d/linux-4.7.config
rename to board/qemu/sh4eb-r2d/linux-4.8.config
diff --git a/board/qemu/sparc-ss10/linux-4.7.config b/board/qemu/sparc-ss10/linux-4.8.config
similarity index 100%
rename from board/qemu/sparc-ss10/linux-4.7.config
rename to board/qemu/sparc-ss10/linux-4.8.config
diff --git a/board/qemu/sparc64-sun4u/linux-4.7.config b/board/qemu/sparc64-sun4u/linux-4.8.config
similarity index 100%
rename from board/qemu/sparc64-sun4u/linux-4.7.config
rename to board/qemu/sparc64-sun4u/linux-4.8.config
diff --git a/board/qemu/x86/linux-4.7.config b/board/qemu/x86/linux-4.7.config
deleted file mode 120000
index 22732f6..0000000
--- a/board/qemu/x86/linux-4.7.config
+++ /dev/null
@@ -1 +0,0 @@
-../x86_64/linux-4.7.config
\ No newline at end of file
diff --git a/board/qemu/x86/linux-4.8.config b/board/qemu/x86/linux-4.8.config
new file mode 120000
index 0000000..fca759e
--- /dev/null
+++ b/board/qemu/x86/linux-4.8.config
@@ -0,0 +1 @@
+../x86_64/linux-4.8.config
\ No newline at end of file
diff --git a/board/qemu/x86_64/linux-4.7.config b/board/qemu/x86_64/linux-4.8.config
similarity index 100%
rename from board/qemu/x86_64/linux-4.7.config
rename to board/qemu/x86_64/linux-4.8.config
diff --git a/board/qemu/xtensa-lx60/linux-4.7-nommu.config b/board/qemu/xtensa-lx60/linux-4.8-nommu.config
similarity index 100%
rename from board/qemu/xtensa-lx60/linux-4.7-nommu.config
rename to board/qemu/xtensa-lx60/linux-4.8-nommu.config
diff --git a/board/qemu/xtensa-lx60/linux-4.7.config b/board/qemu/xtensa-lx60/linux-4.8.config
similarity index 100%
rename from board/qemu/xtensa-lx60/linux-4.7.config
rename to board/qemu/xtensa-lx60/linux-4.8.config
diff --git a/configs/pc_x86_64_bios_defconfig b/configs/pc_x86_64_bios_defconfig
index 020be85..242d3bf 100644
--- a/configs/pc_x86_64_bios_defconfig
+++ b/configs/pc_x86_64_bios_defconfig
@@ -20,15 +20,15 @@ BR2_TARGET_ROOTFS_EXT2_4=y
# BR2_TARGET_ROOTFS_TAR is not set
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/pc/post-image.sh"
-# Linux headers same as kernel, a 4.7 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.8.config"
BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/pc/linux-extras.config"
BR2_LINUX_KERNEL_INSTALL_TARGET=y
diff --git a/configs/pc_x86_64_efi_defconfig b/configs/pc_x86_64_efi_defconfig
index 13194881..118cc59 100644
--- a/configs/pc_x86_64_efi_defconfig
+++ b/configs/pc_x86_64_efi_defconfig
@@ -23,15 +23,15 @@ BR2_TARGET_ROOTFS_EXT2_4=y
# BR2_TARGET_ROOTFS_TAR is not set
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/pc/post-image.sh"
-# Linux headers same as kernel, a 4.7 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.8.config"
BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/pc/linux-extras.config"
BR2_LINUX_KERNEL_INSTALL_TARGET=y
diff --git a/configs/qemu_aarch64_virt_defconfig b/configs/qemu_aarch64_virt_defconfig
index 2f5429b..acde354 100644
--- a/configs/qemu_aarch64_virt_defconfig
+++ b/configs/qemu_aarch64_virt_defconfig
@@ -9,12 +9,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Linux headers same as kernel, a 4.7 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux-4.8.config"
diff --git a/configs/qemu_arm_versatile_defconfig b/configs/qemu_arm_versatile_defconfig
index 738c727..452ed5f 100644
--- a/configs/qemu_arm_versatile_defconfig
+++ b/configs/qemu_arm_versatile_defconfig
@@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.7 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.8.config"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="versatile-pb"
diff --git a/configs/qemu_arm_vexpress_defconfig b/configs/qemu_arm_vexpress_defconfig
index 381c0eb..e841bac 100644
--- a/configs/qemu_arm_vexpress_defconfig
+++ b/configs/qemu_arm_vexpress_defconfig
@@ -13,13 +13,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.7 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
BR2_LINUX_KERNEL_DEFCONFIG="vexpress"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="vexpress-v2p-ca9"
diff --git a/configs/qemu_m68k_mcf5208_defconfig b/configs/qemu_m68k_mcf5208_defconfig
index 659ae3d..c6c9098 100644
--- a/configs/qemu_m68k_mcf5208_defconfig
+++ b/configs/qemu_m68k_mcf5208_defconfig
@@ -9,17 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_INITRAMFS=y
# BR2_TARGET_ROOTFS_TAR is not set
-BR2_GLOBAL_PATCH_DIR="board/qemu/m68k-mcf5208/patches"
-
-# Linux headers same as kernel, a 4.7 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-mcf5208/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-mcf5208/linux-4.8.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
diff --git a/configs/qemu_m68k_q800_defconfig b/configs/qemu_m68k_q800_defconfig
index 6ebd6fa..1d59d77 100644
--- a/configs/qemu_m68k_q800_defconfig
+++ b/configs/qemu_m68k_q800_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.7 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-q800/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-q800/linux-4.8.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
diff --git a/configs/qemu_microblazebe_mmu_defconfig b/configs/qemu_microblazebe_mmu_defconfig
index ecff6c3..188304e 100644
--- a/configs/qemu_microblazebe_mmu_defconfig
+++ b/configs/qemu_microblazebe_mmu_defconfig
@@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Linux headers same as kernel, a 4.7 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-4.8.config"
BR2_LINUX_KERNEL_LINUX_BIN=y
BR2_LINUX_KERNEL_PATCH="board/qemu/microblazebe-mmu/xilinx-xemaclite.patch"
diff --git a/configs/qemu_microblazeel_mmu_defconfig b/configs/qemu_microblazeel_mmu_defconfig
index 67534b3..471d86a 100644
--- a/configs/qemu_microblazeel_mmu_defconfig
+++ b/configs/qemu_microblazeel_mmu_defconfig
@@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Linux headers same as kernel, a 4.7 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-4.8.config"
BR2_LINUX_KERNEL_LINUX_BIN=y
BR2_LINUX_KERNEL_PATCH="board/qemu/microblazeel-mmu/xilinx-xemaclite.patch"
diff --git a/configs/qemu_mips32r2_malta_defconfig b/configs/qemu_mips32r2_malta_defconfig
index 7aa8fc0..16cc0ca 100644
--- a/configs/qemu_mips32r2_malta_defconfig
+++ b/configs/qemu_mips32r2_malta_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.7 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2-malta/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2-malta/linux-4.8.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
diff --git a/configs/qemu_mips32r2el_malta_defconfig b/configs/qemu_mips32r2el_malta_defconfig
index 6c6b3cd..a66bdbd 100644
--- a/configs/qemu_mips32r2el_malta_defconfig
+++ b/configs/qemu_mips32r2el_malta_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.7 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2el-malta/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2el-malta/linux-4.8.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
diff --git a/configs/qemu_mips32r6_malta_defconfig b/configs/qemu_mips32r6_malta_defconfig
index bddde48..a74c101 100644
--- a/configs/qemu_mips32r6_malta_defconfig
+++ b/configs/qemu_mips32r6_malta_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.7 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6-malta/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6-malta/linux-4.8.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Compiler
diff --git a/configs/qemu_mips32r6el_malta_defconfig b/configs/qemu_mips32r6el_malta_defconfig
index f0d64ff..5202e2c 100644
--- a/configs/qemu_mips32r6el_malta_defconfig
+++ b/configs/qemu_mips32r6el_malta_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.7 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6el-malta/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6el-malta/linux-4.8.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Compiler
diff --git a/configs/qemu_mips64_malta_defconfig b/configs/qemu_mips64_malta_defconfig
index 211bf01..92bacc0 100644
--- a/configs/qemu_mips64_malta_defconfig
+++ b/configs/qemu_mips64_malta_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.7 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-4.8.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
diff --git a/configs/qemu_mips64el_malta_defconfig b/configs/qemu_mips64el_malta_defconfig
index b80b3eb..d3cac61 100644
--- a/configs/qemu_mips64el_malta_defconfig
+++ b/configs/qemu_mips64el_malta_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.7 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-4.8.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
diff --git a/configs/qemu_mips64r6_malta_defconfig b/configs/qemu_mips64r6_malta_defconfig
index 43e141d..c68d887 100644
--- a/configs/qemu_mips64r6_malta_defconfig
+++ b/configs/qemu_mips64r6_malta_defconfig
@@ -10,15 +10,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.7 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6-malta/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6-malta/linux-4.8.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Compiler
diff --git a/configs/qemu_mips64r6el_malta_defconfig b/configs/qemu_mips64r6el_malta_defconfig
index c3acc1c..c0ad304 100644
--- a/configs/qemu_mips64r6el_malta_defconfig
+++ b/configs/qemu_mips64r6el_malta_defconfig
@@ -10,15 +10,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.7 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6el-malta/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6el-malta/linux-4.8.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Compiler
diff --git a/configs/qemu_ppc64_pseries_defconfig b/configs/qemu_ppc64_pseries_defconfig
index 5c18357..810f6e6 100644
--- a/configs/qemu_ppc64_pseries_defconfig
+++ b/configs/qemu_ppc64_pseries_defconfig
@@ -10,12 +10,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="hvc0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.7 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
BR2_LINUX_KERNEL_DEFCONFIG="pseries"
BR2_LINUX_KERNEL_VMLINUX=y
diff --git a/configs/qemu_ppc_g3beige_defconfig b/configs/qemu_ppc_g3beige_defconfig
index ab3276d..d0cd2cc 100644
--- a/configs/qemu_ppc_g3beige_defconfig
+++ b/configs/qemu_ppc_g3beige_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.7 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-g3beige/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-g3beige/linux-4.8.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
diff --git a/configs/qemu_ppc_mpc8544ds_defconfig b/configs/qemu_ppc_mpc8544ds_defconfig
index a77936f..ed10eee 100644
--- a/configs/qemu_ppc_mpc8544ds_defconfig
+++ b/configs/qemu_ppc_mpc8544ds_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Linux headers same as kernel, a 4.7 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-mpc8544ds/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-mpc8544ds/linux-4.8.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
diff --git a/configs/qemu_ppc_virtex_ml507_defconfig b/configs/qemu_ppc_virtex_ml507_defconfig
index d2581cb..c8571b6 100644
--- a/configs/qemu_ppc_virtex_ml507_defconfig
+++ b/configs/qemu_ppc_virtex_ml507_defconfig
@@ -6,8 +6,8 @@ BR2_powerpc_440=y
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Linux headers same as kernel, a 4.7 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
# Use soft float
BR2_SOFT_FLOAT=y
@@ -15,9 +15,9 @@ BR2_SOFT_FLOAT=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-virtex-ml507/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-virtex-ml507/linux-4.8.config"
BR2_LINUX_KERNEL_VMLINUX=y
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="virtex440-ml507"
diff --git a/configs/qemu_sh4_r2d_defconfig b/configs/qemu_sh4_r2d_defconfig
index ce387c2..11c4d26 100644
--- a/configs/qemu_sh4_r2d_defconfig
+++ b/configs/qemu_sh4_r2d_defconfig
@@ -10,13 +10,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttySC1"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.7 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
# Linux kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-4.8.config"
BR2_LINUX_KERNEL_ZIMAGE=y
diff --git a/configs/qemu_sh4eb_r2d_defconfig b/configs/qemu_sh4eb_r2d_defconfig
index 246e39e..e88b638 100644
--- a/configs/qemu_sh4eb_r2d_defconfig
+++ b/configs/qemu_sh4eb_r2d_defconfig
@@ -9,13 +9,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttySC1"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.7 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
# Linux kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4eb-r2d/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4eb-r2d/linux-4.8.config"
BR2_LINUX_KERNEL_ZIMAGE=y
diff --git a/configs/qemu_sparc64_sun4u_defconfig b/configs/qemu_sparc64_sun4u_defconfig
index 288945b..a4c0e96 100644
--- a/configs/qemu_sparc64_sun4u_defconfig
+++ b/configs/qemu_sparc64_sun4u_defconfig
@@ -9,12 +9,12 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.7 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
# Linux kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc64-sun4u/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc64-sun4u/linux-4.8.config"
diff --git a/configs/qemu_sparc_ss10_defconfig b/configs/qemu_sparc_ss10_defconfig
index 42efa48..0f3b474 100644
--- a/configs/qemu_sparc_ss10_defconfig
+++ b/configs/qemu_sparc_ss10_defconfig
@@ -9,12 +9,12 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.7 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
# Linux kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc-ss10/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc-ss10/linux-4.8.config"
diff --git a/configs/qemu_x86_64_defconfig b/configs/qemu_x86_64_defconfig
index 40840be..8284d3f 100644
--- a/configs/qemu_x86_64_defconfig
+++ b/configs/qemu_x86_64_defconfig
@@ -9,12 +9,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.7 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.8.config"
diff --git a/configs/qemu_x86_defconfig b/configs/qemu_x86_defconfig
index a17ced4..0a4c6a8 100644
--- a/configs/qemu_x86_defconfig
+++ b/configs/qemu_x86_defconfig
@@ -10,12 +10,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.7 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-4.8.config"
diff --git a/configs/qemu_xtensa_lx60_defconfig b/configs/qemu_xtensa_lx60_defconfig
index cf60100..020ea0c 100644
--- a/configs/qemu_xtensa_lx60_defconfig
+++ b/configs/qemu_xtensa_lx60_defconfig
@@ -16,15 +16,15 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Linux headers same as kernel, a 4.7 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+# Linux headers same as kernel, a 4,8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.8.config"
BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
BR2_LINUX_KERNEL_IMAGE_NAME="Image.elf"
BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="zImage"
diff --git a/configs/qemu_xtensa_lx60_nommu_defconfig b/configs/qemu_xtensa_lx60_nommu_defconfig
index ab9de6a..b2ff479 100644
--- a/configs/qemu_xtensa_lx60_nommu_defconfig
+++ b/configs/qemu_xtensa_lx60_nommu_defconfig
@@ -20,15 +20,15 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Linux headers same as kernel, a 4.7 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.7-nommu.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.8-nommu.config"
BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
BR2_LINUX_KERNEL_IMAGE_NAME="Image.elf"
BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="zImage"
--
2.7.3
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [Buildroot] [PATCH] configs/qemu: bump to the latest kernel version
2016-10-13 13:02 [Buildroot] [PATCH] configs/qemu: bump to the latest kernel version Gustavo Zacarias
@ 2016-10-13 19:45 ` Peter Korsgaard
0 siblings, 0 replies; 6+ messages in thread
From: Peter Korsgaard @ 2016-10-13 19:45 UTC (permalink / raw)
To: buildroot
>>>>> "Gustavo" == Gustavo Zacarias <gustavo@zacarias.com.ar> writes:
> Drop m68k-mcf5208 kernel patch since it's upstream.
> Also bump the pc samples since they're tied to the (base) qemu config.
> Results table:
Committed, thanks.
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Buildroot] [PATCH] configs/qemu: bump to the latest kernel version
2017-06-05 19:52 Waldemar Brodkorb
@ 2017-06-07 20:51 ` Peter Korsgaard
0 siblings, 0 replies; 6+ messages in thread
From: Peter Korsgaard @ 2017-06-07 20:51 UTC (permalink / raw)
To: buildroot
>>>>> "Waldemar" == Waldemar Brodkorb <wbx@openadk.org> writes:
> Xtensa patches no longer required, the make target name changed
> to Image. The Qemu binary for OpenRisc was renamed upstream.
> I removed the x86->x86_64 symlink, independent files preferred.
> Defconfig Kernel Qemu Network Status
> --------------------------------------------------------------
> aarch64_virt 4.11.3 2.9.0 YES OK
> arm_versatile 4.11.3 2.9.0 YES OK
> arm_versatile_nommu 4.4.70 2.9.0 YES OK
> arm_vexpress 4.11.3 2.9.0 YES OK
> m68k_mcf5208 4.11.3 2.9.0 YES OK
> m68k_q800 4.11.3 q800-v2.4.0 NO (2) OK
> microblazebe 4.11.3 2.9.0 YES OK
> microblazeel 4.11.3 2.9.0 YES OK
> mips32r2el_malta 4.11.3 2.9.0 YES OK
> mips32r2_malta 4.11.3 2.9.0 YES OK
> mips32r6el_malta 4.11.3 2.9.0 YES OK
> mips32r6_malta 4.11.3 2.9.0 YES OK
> mips64el_malta 4.11.3 2.9.0 YES OK
> mips64_malta 4.11.3 2.9.0 YES OK
> mips64r6el_malta 4.11.3 2.9.0 YES OK
> mips64r6_malta 4.11.3 2.9.0 YES OK
> nios2-10m50 4.11.3 2.9.0 NO OK
> or1k 4.11.3 2.9.0 NO OK (5)
> ppc_g3beige 4.11.3 2.9.0 YES OK
> ppc_mpc8544ds 4.11.3 2.9.0 YES OK
> ppc_virtex_ml507 4.9.6 2.9.0 NO OK (3)
> ppc64_pseries 4.11.3 2.9.0 YES OK
> sh4 4.9.6 2.9.0 YES OK (4)
> sh4eb 4.9.6 2.9.0 NO (1) OK (4)
> sparc_ss10 4.11.3 2.9.0 YES OK
> sparc64_sun4u 4.11.3 2.9.0 YES OK
> sparc_sun4u 4.11.3 2.9.0 YES OK
> x86 4.11.3 2.9.0 YES OK
> x86_64 4.11.3 2.9.0 YES OK
> xtensa_lx60 4.11.3 2.9.0 YES OK
> xtensa_lx60_nommu 4.11.3 2.9.0 YES OK
> (1) - Probably an endian issue with 8139 emulation/driver
> (2) - There's a network interface, but enabling it in qemu fails
> (3) - Kernel oops with 4.11.3 on boot
> (4) - System is extremely slow with 4.11.3, needs further investigation
> (5) - Qemu binary got renamed to qemu-system-or1k
> Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Committed, thanks!
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Buildroot] [PATCH] configs/qemu: bump to the latest kernel version
@ 2017-06-05 19:52 Waldemar Brodkorb
2017-06-07 20:51 ` Peter Korsgaard
0 siblings, 1 reply; 6+ messages in thread
From: Waldemar Brodkorb @ 2017-06-05 19:52 UTC (permalink / raw)
To: buildroot
Xtensa patches no longer required, the make target name changed
to Image. The Qemu binary for OpenRisc was renamed upstream.
I removed the x86->x86_64 symlink, independent files preferred.
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.11.3 2.9.0 YES OK
arm_versatile 4.11.3 2.9.0 YES OK
arm_versatile_nommu 4.4.70 2.9.0 YES OK
arm_vexpress 4.11.3 2.9.0 YES OK
m68k_mcf5208 4.11.3 2.9.0 YES OK
m68k_q800 4.11.3 q800-v2.4.0 NO (2) OK
microblazebe 4.11.3 2.9.0 YES OK
microblazeel 4.11.3 2.9.0 YES OK
mips32r2el_malta 4.11.3 2.9.0 YES OK
mips32r2_malta 4.11.3 2.9.0 YES OK
mips32r6el_malta 4.11.3 2.9.0 YES OK
mips32r6_malta 4.11.3 2.9.0 YES OK
mips64el_malta 4.11.3 2.9.0 YES OK
mips64_malta 4.11.3 2.9.0 YES OK
mips64r6el_malta 4.11.3 2.9.0 YES OK
mips64r6_malta 4.11.3 2.9.0 YES OK
nios2-10m50 4.11.3 2.9.0 NO OK
or1k 4.11.3 2.9.0 NO OK (5)
ppc_g3beige 4.11.3 2.9.0 YES OK
ppc_mpc8544ds 4.11.3 2.9.0 YES OK
ppc_virtex_ml507 4.9.6 2.9.0 NO OK (3)
ppc64_pseries 4.11.3 2.9.0 YES OK
sh4 4.9.6 2.9.0 YES OK (4)
sh4eb 4.9.6 2.9.0 NO (1) OK (4)
sparc_ss10 4.11.3 2.9.0 YES OK
sparc64_sun4u 4.11.3 2.9.0 YES OK
sparc_sun4u 4.11.3 2.9.0 YES OK
x86 4.11.3 2.9.0 YES OK
x86_64 4.11.3 2.9.0 YES OK
xtensa_lx60 4.11.3 2.9.0 YES OK
xtensa_lx60_nommu 4.11.3 2.9.0 YES OK
(1) - Probably an endian issue with 8139 emulation/driver
(2) - There's a network interface, but enabling it in qemu fails
(3) - Kernel oops with 4.11.3 on boot
(4) - System is extremely slow with 4.11.3, needs further investigation
(5) - Qemu binary got renamed to qemu-system-or1k
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
---
board/qemu/aarch64-virt/linux-4.11.config | 56 ++++++++++++++++++++++
board/qemu/aarch64-virt/linux-4.9.config | 56 ----------------------
board/qemu/aarch64-virt/readme.txt | 2 +-
board/qemu/arm-versatile/linux-4.11.config | 43 +++++++++++++++++
board/qemu/arm-versatile/linux-4.9.config | 43 -----------------
board/qemu/arm-versatile/readme.txt | 2 +-
board/qemu/arm-vexpress/readme.txt | 2 +-
board/qemu/m68k-mcf5208/linux-4.11.config | 28 +++++++++++
board/qemu/m68k-mcf5208/linux-4.8.config | 28 -----------
board/qemu/m68k-mcf5208/readme.txt | 2 +-
board/qemu/m68k-q800/linux-4.11.config | 26 ++++++++++
board/qemu/m68k-q800/linux-4.9.config | 26 ----------
board/qemu/microblazebe-mmu/linux-4.11.config | 20 ++++++++
board/qemu/microblazebe-mmu/linux-4.9.config | 20 --------
board/qemu/microblazebe-mmu/readme.txt | 2 +-
board/qemu/microblazeel-mmu/linux-4.11.config | 19 ++++++++
board/qemu/microblazeel-mmu/linux-4.9.config | 19 --------
board/qemu/microblazeel-mmu/readme.txt | 2 +-
board/qemu/mips32r2-malta/linux-4.11.config | 30 ++++++++++++
board/qemu/mips32r2-malta/linux-4.9.config | 30 ------------
board/qemu/mips32r2-malta/readme.txt | 2 +-
board/qemu/mips32r2el-malta/linux-4.11.config | 31 ++++++++++++
board/qemu/mips32r2el-malta/linux-4.9.config | 31 ------------
board/qemu/mips32r2el-malta/readme.txt | 2 +-
board/qemu/mips32r6-malta/linux-4.11.config | 30 ++++++++++++
board/qemu/mips32r6-malta/linux-4.9.config | 30 ------------
board/qemu/mips32r6-malta/readme.txt | 2 +-
board/qemu/mips32r6el-malta/linux-4.11.config | 30 ++++++++++++
board/qemu/mips32r6el-malta/linux-4.9.config | 30 ------------
board/qemu/mips32r6el-malta/readme.txt | 2 +-
board/qemu/mips64-malta/linux-4.11.config | 34 +++++++++++++
board/qemu/mips64-malta/linux-4.8.config | 34 -------------
board/qemu/mips64-malta/readme.txt | 2 +-
board/qemu/mips64el-malta/linux-4.11.config | 35 ++++++++++++++
board/qemu/mips64el-malta/linux-4.9.config | 35 --------------
board/qemu/mips64r6-malta/linux-4.11.config | 34 +++++++++++++
board/qemu/mips64r6-malta/linux-4.9.config | 34 -------------
board/qemu/mips64r6el-malta/linux-4.11.config | 34 +++++++++++++
board/qemu/mips64r6el-malta/linux-4.9.config | 34 -------------
board/qemu/mips64r6el-malta/readme.txt | 5 +-
board/qemu/nios2-10m50/linux-4.11.fragment | 3 ++
board/qemu/nios2-10m50/linux-4.9.fragment | 3 --
board/qemu/nios2-10m50/readme.txt | 4 +-
board/qemu/or1k/linux-4.11.config | 30 ++++++++++++
board/qemu/or1k/linux-4.9.config | 30 ------------
board/qemu/or1k/patches/linux/0001-ld-or1k.patch | 16 -------
board/qemu/or1k/patches/linux/0002-kallsyms.patch | 25 ----------
board/qemu/or1k/readme.txt | 4 +-
board/qemu/ppc-g3beige/linux-4.11.config | 25 ++++++++++
board/qemu/ppc-g3beige/linux-4.9.config | 25 ----------
board/qemu/ppc-g3beige/readme.txt | 2 +-
board/qemu/ppc-mpc8544ds/linux-4.11.config | 38 +++++++++++++++
board/qemu/ppc-mpc8544ds/linux-4.9.config | 38 ---------------
board/qemu/ppc-mpc8544ds/readme.txt | 2 +-
board/qemu/ppc64-pseries/readme.txt | 2 +-
board/qemu/sh4-r2d/linux-4.11.config | 38 +++++++++++++++
board/qemu/sh4-r2d/linux-4.9.config | 38 ---------------
board/qemu/sh4eb-r2d/linux-4.11.config | 38 +++++++++++++++
board/qemu/sh4eb-r2d/linux-4.9.config | 38 ---------------
board/qemu/sparc-ss10/linux-4.11.config | 31 ++++++++++++
board/qemu/sparc-ss10/linux-4.9.config | 31 ------------
board/qemu/sparc-ss10/readme.txt | 2 +-
board/qemu/sparc64-sun4u/linux-4.11.config | 25 ++++++++++
board/qemu/sparc64-sun4u/linux-4.9.config | 25 ----------
board/qemu/sparc64-sun4u/readme.txt | 2 +-
board/qemu/x86/linux-4.11.config | 45 +++++++++++++++++
board/qemu/x86/linux-4.9.config | 1 -
board/qemu/x86/readme.txt | 2 +-
board/qemu/x86_64/linux-4.11.config | 45 +++++++++++++++++
board/qemu/x86_64/linux-4.9.config | 45 -----------------
board/qemu/x86_64/readme.txt | 2 +-
board/qemu/xtensa-lx60/linux-4.11-nommu.config | 38 +++++++++++++++
board/qemu/xtensa-lx60/linux-4.11.config | 36 ++++++++++++++
board/qemu/xtensa-lx60/linux-4.9-nommu.config | 38 ---------------
board/qemu/xtensa-lx60/linux-4.9.config | 36 --------------
.../linux-0001-disable-redboot-and-uboot.patch | 16 -------
board/qemu/xtensa-lx60/readme.txt | 3 +-
configs/qemu_aarch64_virt_defconfig | 8 ++--
configs/qemu_arm_versatile_defconfig | 8 ++--
configs/qemu_arm_versatile_nommu_defconfig | 2 +-
configs/qemu_arm_vexpress_defconfig | 6 +--
configs/qemu_m68k_mcf5208_defconfig | 8 ++--
configs/qemu_m68k_q800_defconfig | 8 ++--
configs/qemu_microblazebe_mmu_defconfig | 8 ++--
configs/qemu_microblazeel_mmu_defconfig | 8 ++--
configs/qemu_mips32r2_malta_defconfig | 8 ++--
configs/qemu_mips32r2el_malta_defconfig | 8 ++--
configs/qemu_mips32r6_malta_defconfig | 8 ++--
configs/qemu_mips32r6el_malta_defconfig | 8 ++--
configs/qemu_mips64_malta_defconfig | 8 ++--
configs/qemu_mips64el_malta_defconfig | 8 ++--
configs/qemu_mips64r6_malta_defconfig | 8 ++--
configs/qemu_mips64r6el_malta_defconfig | 8 ++--
configs/qemu_nios2_10m50_defconfig | 8 ++--
configs/qemu_or1k_defconfig | 11 ++---
configs/qemu_ppc64_pseries_defconfig | 6 +--
configs/qemu_ppc_g3beige_defconfig | 8 ++--
configs/qemu_ppc_mpc8544ds_defconfig | 8 ++--
configs/qemu_sparc64_sun4u_defconfig | 8 ++--
configs/qemu_sparc_ss10_defconfig | 8 ++--
configs/qemu_x86_64_defconfig | 8 ++--
configs/qemu_x86_defconfig | 8 ++--
configs/qemu_xtensa_lx60_defconfig | 13 ++---
configs/qemu_xtensa_lx60_nommu_defconfig | 13 ++---
104 files changed, 970 insertions(+), 998 deletions(-)
create mode 100644 board/qemu/aarch64-virt/linux-4.11.config
delete mode 100644 board/qemu/aarch64-virt/linux-4.9.config
create mode 100644 board/qemu/arm-versatile/linux-4.11.config
delete mode 100644 board/qemu/arm-versatile/linux-4.9.config
create mode 100644 board/qemu/m68k-mcf5208/linux-4.11.config
delete mode 100644 board/qemu/m68k-mcf5208/linux-4.8.config
create mode 100644 board/qemu/m68k-q800/linux-4.11.config
delete mode 100644 board/qemu/m68k-q800/linux-4.9.config
create mode 100644 board/qemu/microblazebe-mmu/linux-4.11.config
delete mode 100644 board/qemu/microblazebe-mmu/linux-4.9.config
create mode 100644 board/qemu/microblazeel-mmu/linux-4.11.config
delete mode 100644 board/qemu/microblazeel-mmu/linux-4.9.config
create mode 100644 board/qemu/mips32r2-malta/linux-4.11.config
delete mode 100644 board/qemu/mips32r2-malta/linux-4.9.config
create mode 100644 board/qemu/mips32r2el-malta/linux-4.11.config
delete mode 100644 board/qemu/mips32r2el-malta/linux-4.9.config
create mode 100644 board/qemu/mips32r6-malta/linux-4.11.config
delete mode 100644 board/qemu/mips32r6-malta/linux-4.9.config
create mode 100644 board/qemu/mips32r6el-malta/linux-4.11.config
delete mode 100644 board/qemu/mips32r6el-malta/linux-4.9.config
create mode 100644 board/qemu/mips64-malta/linux-4.11.config
delete mode 100644 board/qemu/mips64-malta/linux-4.8.config
create mode 100644 board/qemu/mips64el-malta/linux-4.11.config
delete mode 100644 board/qemu/mips64el-malta/linux-4.9.config
create mode 100644 board/qemu/mips64r6-malta/linux-4.11.config
delete mode 100644 board/qemu/mips64r6-malta/linux-4.9.config
create mode 100644 board/qemu/mips64r6el-malta/linux-4.11.config
delete mode 100644 board/qemu/mips64r6el-malta/linux-4.9.config
create mode 100644 board/qemu/nios2-10m50/linux-4.11.fragment
delete mode 100644 board/qemu/nios2-10m50/linux-4.9.fragment
create mode 100644 board/qemu/or1k/linux-4.11.config
delete mode 100644 board/qemu/or1k/linux-4.9.config
delete mode 100644 board/qemu/or1k/patches/linux/0001-ld-or1k.patch
delete mode 100644 board/qemu/or1k/patches/linux/0002-kallsyms.patch
create mode 100644 board/qemu/ppc-g3beige/linux-4.11.config
delete mode 100644 board/qemu/ppc-g3beige/linux-4.9.config
create mode 100644 board/qemu/ppc-mpc8544ds/linux-4.11.config
delete mode 100644 board/qemu/ppc-mpc8544ds/linux-4.9.config
create mode 100644 board/qemu/sh4-r2d/linux-4.11.config
delete mode 100644 board/qemu/sh4-r2d/linux-4.9.config
create mode 100644 board/qemu/sh4eb-r2d/linux-4.11.config
delete mode 100644 board/qemu/sh4eb-r2d/linux-4.9.config
create mode 100644 board/qemu/sparc-ss10/linux-4.11.config
delete mode 100644 board/qemu/sparc-ss10/linux-4.9.config
create mode 100644 board/qemu/sparc64-sun4u/linux-4.11.config
delete mode 100644 board/qemu/sparc64-sun4u/linux-4.9.config
create mode 100644 board/qemu/x86/linux-4.11.config
delete mode 120000 board/qemu/x86/linux-4.9.config
create mode 100644 board/qemu/x86_64/linux-4.11.config
delete mode 100644 board/qemu/x86_64/linux-4.9.config
create mode 100644 board/qemu/xtensa-lx60/linux-4.11-nommu.config
create mode 100644 board/qemu/xtensa-lx60/linux-4.11.config
delete mode 100644 board/qemu/xtensa-lx60/linux-4.9-nommu.config
delete mode 100644 board/qemu/xtensa-lx60/linux-4.9.config
delete mode 100644 board/qemu/xtensa-lx60/linux/linux-0001-disable-redboot-and-uboot.patch
diff --git a/board/qemu/aarch64-virt/linux-4.11.config b/board/qemu/aarch64-virt/linux-4.11.config
new file mode 100644
index 0000000..93cb42f
--- /dev/null
+++ b/board/qemu/aarch64-virt/linux-4.11.config
@@ -0,0 +1,56 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_TASKSTATS=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_PROFILING=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_BLK_DEV_BSGLIB=y
+CONFIG_ARCH_VEXPRESS=y
+CONFIG_SMP=y
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_BINFMT_MISC=y
+CONFIG_COMPAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=y
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_BRIDGE=m
+CONFIG_NET_SCHED=y
+CONFIG_VSOCKETS=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_VIRTIO_BLK=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_VIRTIO=y
+CONFIG_ATA=y
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+CONFIG_MACVLAN=y
+CONFIG_VIRTIO_NET=y
+CONFIG_NLMON=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_VIRTIO=y
+CONFIG_RTC_CLASS=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
+CONFIG_MAILBOX=y
+CONFIG_PL320_MBOX=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
diff --git a/board/qemu/aarch64-virt/linux-4.9.config b/board/qemu/aarch64-virt/linux-4.9.config
deleted file mode 100644
index 93cb42f..0000000
--- a/board/qemu/aarch64-virt/linux-4.9.config
+++ /dev/null
@@ -1,56 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_TASKSTATS=y
-CONFIG_SCHED_AUTOGROUP=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_BLK_DEV_BSGLIB=y
-CONFIG_ARCH_VEXPRESS=y
-CONFIG_SMP=y
-CONFIG_TRANSPARENT_HUGEPAGE=y
-CONFIG_BINFMT_MISC=y
-CONFIG_COMPAT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_PACKET_DIAG=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_BRIDGE=m
-CONFIG_NET_SCHED=y
-CONFIG_VSOCKETS=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_VIRTIO_BLK=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_VIRTIO=y
-CONFIG_ATA=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_MACVLAN=y
-CONFIG_VIRTIO_NET=y
-CONFIG_NLMON=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_VIRTIO_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_VIRTIO=y
-CONFIG_RTC_CLASS=y
-CONFIG_VIRTIO_MMIO=y
-CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
-CONFIG_MAILBOX=y
-CONFIG_PL320_MBOX=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
diff --git a/board/qemu/aarch64-virt/readme.txt b/board/qemu/aarch64-virt/readme.txt
index 1c4c7f9..ece8a53 100644
--- a/board/qemu/aarch64-virt/readme.txt
+++ b/board/qemu/aarch64-virt/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
The login prompt will appear in the terminal that started Qemu.
-Tested with QEMU 2.6.0
+Tested with QEMU 2.9.0
diff --git a/board/qemu/arm-versatile/linux-4.11.config b/board/qemu/arm-versatile/linux-4.11.config
new file mode 100644
index 0000000..b1001d8
--- /dev/null
+++ b/board/qemu/arm-versatile/linux-4.11.config
@@ -0,0 +1,43 @@
+CONFIG_SYSVIPC=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_VERSATILE=y
+CONFIG_PCI=y
+CONFIG_PCI_VERSATILE=y
+CONFIG_AEABI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_NETDEVICES=y
+CONFIG_8139CP=y
+CONFIG_PHYLIB=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIO_AMBAKMI=y
+CONFIG_LEGACY_PTY_COUNT=16
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_FB=y
+CONFIG_FB_ARMCLCD=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SND=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_ARMAACI=m
+CONFIG_EXT4_FS=y
+CONFIG_VFAT_FS=m
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_MAGIC_SYSRQ=y
diff --git a/board/qemu/arm-versatile/linux-4.9.config b/board/qemu/arm-versatile/linux-4.9.config
deleted file mode 100644
index b1001d8..0000000
--- a/board/qemu/arm-versatile/linux-4.9.config
+++ /dev/null
@@ -1,43 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_VERSATILE=y
-CONFIG_PCI=y
-CONFIG_PCI_VERSATILE=y
-CONFIG_AEABI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_NETDEVICES=y
-CONFIG_8139CP=y
-CONFIG_PHYLIB=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIO_AMBAKMI=y
-CONFIG_LEGACY_PTY_COUNT=16
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=m
-CONFIG_FB=y
-CONFIG_FB_ARMCLCD=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_ARMAACI=m
-CONFIG_EXT4_FS=y
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_MAGIC_SYSRQ=y
diff --git a/board/qemu/arm-versatile/readme.txt b/board/qemu/arm-versatile/readme.txt
index c8ea4cd..6e899f4 100644
--- a/board/qemu/arm-versatile/readme.txt
+++ b/board/qemu/arm-versatile/readme.txt
@@ -9,4 +9,4 @@ Or for the noMMU emulation:
The login prompt will appear in the terminal that started Qemu. The
graphical window is the framebuffer.
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0
diff --git a/board/qemu/arm-vexpress/readme.txt b/board/qemu/arm-vexpress/readme.txt
index 99812b9..57bb814 100644
--- a/board/qemu/arm-vexpress/readme.txt
+++ b/board/qemu/arm-vexpress/readme.txt
@@ -8,4 +8,4 @@ graphical window is the framebuffer.
If you want to emulate more cores change "-smp 1" to "-smp 2" for
dual-core or even "smp -4" for a quad-core configuration.
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0
diff --git a/board/qemu/m68k-mcf5208/linux-4.11.config b/board/qemu/m68k-mcf5208/linux-4.11.config
new file mode 100644
index 0000000..09a89d7
--- /dev/null
+++ b/board/qemu/m68k-mcf5208/linux-4.11.config
@@ -0,0 +1,28 @@
+CONFIG_M68K=y
+CONFIG_COLDFIRE=y
+# CONFIG_MMU is not set
+CONFIG_M520x=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=66666666
+CONFIG_CLOCK_DIV=1
+CONFIG_M5208EVB=y
+CONFIG_FREESCALE=y
+CONFIG_RAMBASE=0x40000000
+CONFIG_RAMSIZE=0x0
+CONFIG_VECTORBASE=0x40000000
+CONFIG_KERNELBASE=0x40020000
+CONFIG_4KSTACKS=y
+CONFIG_RAMKERNEL=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=115200
+CONFIG_SERIAL_MCF_CONSOLE=y
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="console=ttyS0,115200"
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_VENDOR_FREESCALE=y
+CONFIG_FEC=y
diff --git a/board/qemu/m68k-mcf5208/linux-4.8.config b/board/qemu/m68k-mcf5208/linux-4.8.config
deleted file mode 100644
index 09a89d7..0000000
--- a/board/qemu/m68k-mcf5208/linux-4.8.config
+++ /dev/null
@@ -1,28 +0,0 @@
-CONFIG_M68K=y
-CONFIG_COLDFIRE=y
-# CONFIG_MMU is not set
-CONFIG_M520x=y
-CONFIG_CLOCK_SET=y
-CONFIG_CLOCK_FREQ=66666666
-CONFIG_CLOCK_DIV=1
-CONFIG_M5208EVB=y
-CONFIG_FREESCALE=y
-CONFIG_RAMBASE=0x40000000
-CONFIG_RAMSIZE=0x0
-CONFIG_VECTORBASE=0x40000000
-CONFIG_KERNELBASE=0x40020000
-CONFIG_4KSTACKS=y
-CONFIG_RAMKERNEL=y
-CONFIG_BINFMT_FLAT=y
-CONFIG_SERIAL_MCF=y
-CONFIG_SERIAL_MCF_BAUDRATE=115200
-CONFIG_SERIAL_MCF_CONSOLE=y
-CONFIG_BOOTPARAM=y
-CONFIG_BOOTPARAM_STRING="console=ttyS0,115200"
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_VENDOR_FREESCALE=y
-CONFIG_FEC=y
diff --git a/board/qemu/m68k-mcf5208/readme.txt b/board/qemu/m68k-mcf5208/readme.txt
index 00deb2c..014a0dc 100644
--- a/board/qemu/m68k-mcf5208/readme.txt
+++ b/board/qemu/m68k-mcf5208/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
The login prompt will appear in the terminal that started Qemu.
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0
diff --git a/board/qemu/m68k-q800/linux-4.11.config b/board/qemu/m68k-q800/linux-4.11.config
new file mode 100644
index 0000000..44eb70e
--- /dev/null
+++ b/board/qemu/m68k-q800/linux-4.11.config
@@ -0,0 +1,26 @@
+CONFIG_M68K=y
+CONFIG_M68040=y
+CONFIG_M68KFPU_EMU=y
+CONFIG_MAC=y
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_ADB=y
+CONFIG_ADB_MACII=y
+CONFIG_TTY=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_NETDEVICES=y
+CONFIG_MACSONIC=y
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_SCSI_MAC_ESP=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SERIAL_PMACZILOG=y
+CONFIG_SERIAL_PMACZILOG_TTYS=y
+CONFIG_SERIAL_PMACZILOG_CONSOLE=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
diff --git a/board/qemu/m68k-q800/linux-4.9.config b/board/qemu/m68k-q800/linux-4.9.config
deleted file mode 100644
index 44eb70e..0000000
--- a/board/qemu/m68k-q800/linux-4.9.config
+++ /dev/null
@@ -1,26 +0,0 @@
-CONFIG_M68K=y
-CONFIG_M68040=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_MAC=y
-CONFIG_MACINTOSH_DRIVERS=y
-CONFIG_ADB=y
-CONFIG_ADB_MACII=y
-CONFIG_TTY=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_NETDEVICES=y
-CONFIG_MACSONIC=y
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-CONFIG_SCSI_LOWLEVEL=y
-CONFIG_SCSI_MAC_ESP=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SERIAL_PMACZILOG=y
-CONFIG_SERIAL_PMACZILOG_TTYS=y
-CONFIG_SERIAL_PMACZILOG_CONSOLE=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
diff --git a/board/qemu/microblazebe-mmu/linux-4.11.config b/board/qemu/microblazebe-mmu/linux-4.11.config
new file mode 100644
index 0000000..7bcd382
--- /dev/null
+++ b/board/qemu/microblazebe-mmu/linux-4.11.config
@@ -0,0 +1,20 @@
+CONFIG_SYSVIPC=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_OPT_LIB_ASM=y
+CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp"
+CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
+CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
+CONFIG_MMU=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_NETDEVICES=y
+CONFIG_XILINX_EMACLITE=y
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_TMPFS=y
diff --git a/board/qemu/microblazebe-mmu/linux-4.9.config b/board/qemu/microblazebe-mmu/linux-4.9.config
deleted file mode 100644
index 7bcd382..0000000
--- a/board/qemu/microblazebe-mmu/linux-4.9.config
+++ /dev/null
@@ -1,20 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_OPT_LIB_ASM=y
-CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp"
-CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
-CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
-CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
-CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
-CONFIG_MMU=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_NETDEVICES=y
-CONFIG_XILINX_EMACLITE=y
-CONFIG_SERIAL_UARTLITE=y
-CONFIG_SERIAL_UARTLITE_CONSOLE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_TMPFS=y
diff --git a/board/qemu/microblazebe-mmu/readme.txt b/board/qemu/microblazebe-mmu/readme.txt
index 25fc35c..cf0afda 100644
--- a/board/qemu/microblazebe-mmu/readme.txt
+++ b/board/qemu/microblazebe-mmu/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
The login prompt will appear in the terminal that started Qemu.
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0
diff --git a/board/qemu/microblazeel-mmu/linux-4.11.config b/board/qemu/microblazeel-mmu/linux-4.11.config
new file mode 100644
index 0000000..a622828
--- /dev/null
+++ b/board/qemu/microblazeel-mmu/linux-4.11.config
@@ -0,0 +1,19 @@
+CONFIG_SYSVIPC=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp"
+CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
+CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
+CONFIG_MMU=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_NETDEVICES=y
+CONFIG_XILINX_EMACLITE=y
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_TMPFS=y
diff --git a/board/qemu/microblazeel-mmu/linux-4.9.config b/board/qemu/microblazeel-mmu/linux-4.9.config
deleted file mode 100644
index a622828..0000000
--- a/board/qemu/microblazeel-mmu/linux-4.9.config
+++ /dev/null
@@ -1,19 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp"
-CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
-CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
-CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
-CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
-CONFIG_MMU=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_NETDEVICES=y
-CONFIG_XILINX_EMACLITE=y
-CONFIG_SERIAL_UARTLITE=y
-CONFIG_SERIAL_UARTLITE_CONSOLE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_TMPFS=y
diff --git a/board/qemu/microblazeel-mmu/readme.txt b/board/qemu/microblazeel-mmu/readme.txt
index 1a77a56..9edf101 100644
--- a/board/qemu/microblazeel-mmu/readme.txt
+++ b/board/qemu/microblazeel-mmu/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
The login prompt will appear in the terminal that started Qemu.
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0
diff --git a/board/qemu/mips32r2-malta/linux-4.11.config b/board/qemu/mips32r2-malta/linux-4.11.config
new file mode 100644
index 0000000..3a26ac8
--- /dev/null
+++ b/board/qemu/mips32r2-malta/linux-4.11.config
@@ -0,0 +1,30 @@
+CONFIG_MIPS_MALTA=y
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_MIPS_MT_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_SYSVIPC=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PCI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_PCNET32=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FB=y
+CONFIG_FB_CIRRUS=y
+CONFIG_USB=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
diff --git a/board/qemu/mips32r2-malta/linux-4.9.config b/board/qemu/mips32r2-malta/linux-4.9.config
deleted file mode 100644
index 3a26ac8..0000000
--- a/board/qemu/mips32r2-malta/linux-4.9.config
+++ /dev/null
@@ -1,30 +0,0 @@
-CONFIG_MIPS_MALTA=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_SYSVIPC=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_PCNET32=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FB=y
-CONFIG_FB_CIRRUS=y
-CONFIG_USB=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
diff --git a/board/qemu/mips32r2-malta/readme.txt b/board/qemu/mips32r2-malta/readme.txt
index 13f8910..7002ab1 100644
--- a/board/qemu/mips32r2-malta/readme.txt
+++ b/board/qemu/mips32r2-malta/readme.txt
@@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The
graphical window is the framebuffer. No keyboard support has been
enabled.
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0
diff --git a/board/qemu/mips32r2el-malta/linux-4.11.config b/board/qemu/mips32r2el-malta/linux-4.11.config
new file mode 100644
index 0000000..79d7352
--- /dev/null
+++ b/board/qemu/mips32r2el-malta/linux-4.11.config
@@ -0,0 +1,31 @@
+CONFIG_MIPS_MALTA=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_MIPS_MT_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_SYSVIPC=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PCI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_PCNET32=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FB=y
+CONFIG_FB_CIRRUS=y
+CONFIG_USB=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
diff --git a/board/qemu/mips32r2el-malta/linux-4.9.config b/board/qemu/mips32r2el-malta/linux-4.9.config
deleted file mode 100644
index 79d7352..0000000
--- a/board/qemu/mips32r2el-malta/linux-4.9.config
+++ /dev/null
@@ -1,31 +0,0 @@
-CONFIG_MIPS_MALTA=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_SYSVIPC=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_PCNET32=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FB=y
-CONFIG_FB_CIRRUS=y
-CONFIG_USB=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
diff --git a/board/qemu/mips32r2el-malta/readme.txt b/board/qemu/mips32r2el-malta/readme.txt
index 5c4bbda..bfc9c49 100644
--- a/board/qemu/mips32r2el-malta/readme.txt
+++ b/board/qemu/mips32r2el-malta/readme.txt
@@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The
graphical window is the framebuffer. No keyboard support has been
enabled.
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0
diff --git a/board/qemu/mips32r6-malta/linux-4.11.config b/board/qemu/mips32r6-malta/linux-4.11.config
new file mode 100644
index 0000000..d559676
--- /dev/null
+++ b/board/qemu/mips32r6-malta/linux-4.11.config
@@ -0,0 +1,30 @@
+CONFIG_MIPS_MALTA=y
+CONFIG_CPU_MIPS32_R6=y
+CONFIG_MIPS_MT_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_SYSVIPC=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PCI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_PCNET32=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FB=y
+CONFIG_FB_CIRRUS=y
+CONFIG_USB=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
diff --git a/board/qemu/mips32r6-malta/linux-4.9.config b/board/qemu/mips32r6-malta/linux-4.9.config
deleted file mode 100644
index d559676..0000000
--- a/board/qemu/mips32r6-malta/linux-4.9.config
+++ /dev/null
@@ -1,30 +0,0 @@
-CONFIG_MIPS_MALTA=y
-CONFIG_CPU_MIPS32_R6=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_SYSVIPC=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_PCNET32=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FB=y
-CONFIG_FB_CIRRUS=y
-CONFIG_USB=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
diff --git a/board/qemu/mips32r6-malta/readme.txt b/board/qemu/mips32r6-malta/readme.txt
index 107c47d..7d79c66 100644
--- a/board/qemu/mips32r6-malta/readme.txt
+++ b/board/qemu/mips32r6-malta/readme.txt
@@ -4,4 +4,4 @@ qemu-system-mips -M malta -cpu mips32r6-generic -kernel output/images/vmlinux -d
The login prompt will appear in the terminal that started Qemu.
-Tested with QEMU 2.6.0
+Tested with QEMU 2.9.0
diff --git a/board/qemu/mips32r6el-malta/linux-4.11.config b/board/qemu/mips32r6el-malta/linux-4.11.config
new file mode 100644
index 0000000..d559676
--- /dev/null
+++ b/board/qemu/mips32r6el-malta/linux-4.11.config
@@ -0,0 +1,30 @@
+CONFIG_MIPS_MALTA=y
+CONFIG_CPU_MIPS32_R6=y
+CONFIG_MIPS_MT_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_SYSVIPC=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PCI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_PCNET32=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FB=y
+CONFIG_FB_CIRRUS=y
+CONFIG_USB=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
diff --git a/board/qemu/mips32r6el-malta/linux-4.9.config b/board/qemu/mips32r6el-malta/linux-4.9.config
deleted file mode 100644
index d559676..0000000
--- a/board/qemu/mips32r6el-malta/linux-4.9.config
+++ /dev/null
@@ -1,30 +0,0 @@
-CONFIG_MIPS_MALTA=y
-CONFIG_CPU_MIPS32_R6=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_SYSVIPC=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_PCNET32=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FB=y
-CONFIG_FB_CIRRUS=y
-CONFIG_USB=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
diff --git a/board/qemu/mips32r6el-malta/readme.txt b/board/qemu/mips32r6el-malta/readme.txt
index e29115f..78f8350 100644
--- a/board/qemu/mips32r6el-malta/readme.txt
+++ b/board/qemu/mips32r6el-malta/readme.txt
@@ -4,4 +4,4 @@ qemu-system-mipsel -M malta -cpu mips32r6-generic -kernel output/images/vmlinux
The login prompt will appear in the terminal that started Qemu.
-Tested with QEMU 2.6.0
+Tested with QEMU 2.9.0
diff --git a/board/qemu/mips64-malta/linux-4.11.config b/board/qemu/mips64-malta/linux-4.11.config
new file mode 100644
index 0000000..cd0b560
--- /dev/null
+++ b/board/qemu/mips64-malta/linux-4.11.config
@@ -0,0 +1,34 @@
+CONFIG_MIPS_MALTA=y
+CONFIG_CPU_MIPS64_R1=y
+CONFIG_64BIT=y
+CONFIG_MIPS_MT_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_SYSVIPC=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PCI=y
+CONFIG_MIPS32_COMPAT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_PCNET32=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FB=y
+CONFIG_FB_CIRRUS=y
+CONFIG_USB=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
diff --git a/board/qemu/mips64-malta/linux-4.8.config b/board/qemu/mips64-malta/linux-4.8.config
deleted file mode 100644
index cd0b560..0000000
--- a/board/qemu/mips64-malta/linux-4.8.config
+++ /dev/null
@@ -1,34 +0,0 @@
-CONFIG_MIPS_MALTA=y
-CONFIG_CPU_MIPS64_R1=y
-CONFIG_64BIT=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_SYSVIPC=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PCI=y
-CONFIG_MIPS32_COMPAT=y
-CONFIG_MIPS32_O32=y
-CONFIG_MIPS32_N32=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_PCNET32=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FB=y
-CONFIG_FB_CIRRUS=y
-CONFIG_USB=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
diff --git a/board/qemu/mips64-malta/readme.txt b/board/qemu/mips64-malta/readme.txt
index a89985d..8a73210 100644
--- a/board/qemu/mips64-malta/readme.txt
+++ b/board/qemu/mips64-malta/readme.txt
@@ -5,4 +5,4 @@ Run the emulation with:
The login prompt will appear in the terminal that started Qemu. The
graphical window is the framebuffer.
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0
diff --git a/board/qemu/mips64el-malta/linux-4.11.config b/board/qemu/mips64el-malta/linux-4.11.config
new file mode 100644
index 0000000..c6b46d4
--- /dev/null
+++ b/board/qemu/mips64el-malta/linux-4.11.config
@@ -0,0 +1,35 @@
+CONFIG_MIPS_MALTA=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS64_R1=y
+CONFIG_64BIT=y
+CONFIG_MIPS_MT_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_SYSVIPC=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PCI=y
+CONFIG_MIPS32_COMPAT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_PCNET32=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FB=y
+CONFIG_FB_CIRRUS=y
+CONFIG_USB=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
diff --git a/board/qemu/mips64el-malta/linux-4.9.config b/board/qemu/mips64el-malta/linux-4.9.config
deleted file mode 100644
index c6b46d4..0000000
--- a/board/qemu/mips64el-malta/linux-4.9.config
+++ /dev/null
@@ -1,35 +0,0 @@
-CONFIG_MIPS_MALTA=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS64_R1=y
-CONFIG_64BIT=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_SYSVIPC=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PCI=y
-CONFIG_MIPS32_COMPAT=y
-CONFIG_MIPS32_O32=y
-CONFIG_MIPS32_N32=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_PCNET32=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FB=y
-CONFIG_FB_CIRRUS=y
-CONFIG_USB=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
diff --git a/board/qemu/mips64r6-malta/linux-4.11.config b/board/qemu/mips64r6-malta/linux-4.11.config
new file mode 100644
index 0000000..0ebfdbd
--- /dev/null
+++ b/board/qemu/mips64r6-malta/linux-4.11.config
@@ -0,0 +1,34 @@
+CONFIG_MIPS_MALTA=y
+CONFIG_CPU_MIPS64_R6=y
+CONFIG_64BIT=y
+CONFIG_MIPS_MT_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_SYSVIPC=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PCI=y
+CONFIG_MIPS32_COMPAT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_PCNET32=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FB=y
+CONFIG_FB_CIRRUS=y
+CONFIG_USB=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
diff --git a/board/qemu/mips64r6-malta/linux-4.9.config b/board/qemu/mips64r6-malta/linux-4.9.config
deleted file mode 100644
index 0ebfdbd..0000000
--- a/board/qemu/mips64r6-malta/linux-4.9.config
+++ /dev/null
@@ -1,34 +0,0 @@
-CONFIG_MIPS_MALTA=y
-CONFIG_CPU_MIPS64_R6=y
-CONFIG_64BIT=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_SYSVIPC=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PCI=y
-CONFIG_MIPS32_COMPAT=y
-CONFIG_MIPS32_O32=y
-CONFIG_MIPS32_N32=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_PCNET32=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FB=y
-CONFIG_FB_CIRRUS=y
-CONFIG_USB=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
diff --git a/board/qemu/mips64r6el-malta/linux-4.11.config b/board/qemu/mips64r6el-malta/linux-4.11.config
new file mode 100644
index 0000000..0ebfdbd
--- /dev/null
+++ b/board/qemu/mips64r6el-malta/linux-4.11.config
@@ -0,0 +1,34 @@
+CONFIG_MIPS_MALTA=y
+CONFIG_CPU_MIPS64_R6=y
+CONFIG_64BIT=y
+CONFIG_MIPS_MT_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_SYSVIPC=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PCI=y
+CONFIG_MIPS32_COMPAT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_PCNET32=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_FB=y
+CONFIG_FB_CIRRUS=y
+CONFIG_USB=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
diff --git a/board/qemu/mips64r6el-malta/linux-4.9.config b/board/qemu/mips64r6el-malta/linux-4.9.config
deleted file mode 100644
index 0ebfdbd..0000000
--- a/board/qemu/mips64r6el-malta/linux-4.9.config
+++ /dev/null
@@ -1,34 +0,0 @@
-CONFIG_MIPS_MALTA=y
-CONFIG_CPU_MIPS64_R6=y
-CONFIG_64BIT=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_SYSVIPC=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PCI=y
-CONFIG_MIPS32_COMPAT=y
-CONFIG_MIPS32_O32=y
-CONFIG_MIPS32_N32=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_PCNET32=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FB=y
-CONFIG_FB_CIRRUS=y
-CONFIG_USB=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
diff --git a/board/qemu/mips64r6el-malta/readme.txt b/board/qemu/mips64r6el-malta/readme.txt
index b1dc23a..9250cf3 100644
--- a/board/qemu/mips64r6el-malta/readme.txt
+++ b/board/qemu/mips64r6el-malta/readme.txt
@@ -4,7 +4,4 @@ Run the emulation with:
The login prompt will appear in the terminal that started Qemu.
-Tested with QEMU 2.6.0
-
-Might work with 2.6.0 by changing the -cpu entry to MIPS64R6-generic
-since the naming was updated and the old name removed in 2.7.0
+Tested with QEMU 2.9.0
diff --git a/board/qemu/nios2-10m50/linux-4.11.fragment b/board/qemu/nios2-10m50/linux-4.11.fragment
new file mode 100644
index 0000000..76c864f
--- /dev/null
+++ b/board/qemu/nios2-10m50/linux-4.11.fragment
@@ -0,0 +1,3 @@
+# Embed the DTB in the kernel image
+CONFIG_NIOS2_DTB_SOURCE_BOOL=y
+CONFIG_NIOS2_DTB_SOURCE="arch/nios2/boot/dts/10m50_devboard.dts"
diff --git a/board/qemu/nios2-10m50/linux-4.9.fragment b/board/qemu/nios2-10m50/linux-4.9.fragment
deleted file mode 100644
index 76c864f..0000000
--- a/board/qemu/nios2-10m50/linux-4.9.fragment
+++ /dev/null
@@ -1,3 +0,0 @@
-# Embed the DTB in the kernel image
-CONFIG_NIOS2_DTB_SOURCE_BOOL=y
-CONFIG_NIOS2_DTB_SOURCE="arch/nios2/boot/dts/10m50_devboard.dts"
diff --git a/board/qemu/nios2-10m50/readme.txt b/board/qemu/nios2-10m50/readme.txt
index 978ba95..f7dee37 100644
--- a/board/qemu/nios2-10m50/readme.txt
+++ b/board/qemu/nios2-10m50/readme.txt
@@ -4,6 +4,4 @@ Run the emulation with:
The login prompt will appear in the terminal that started Qemu.
-Tested with the upcoming QEMU 2.9.0 [1]
-
-[1] http://git.qemu.org/?p=qemu.git;h=ae5045ae5b2bbd8ce1335d1b05f9ecacca83a6cf
+Tested with QEMU 2.9.0.
diff --git a/board/qemu/or1k/linux-4.11.config b/board/qemu/or1k/linux-4.11.config
new file mode 100644
index 0000000..0a817b1
--- /dev/null
+++ b/board/qemu/or1k/linux-4.11.config
@@ -0,0 +1,30 @@
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="${BR_BINARIES_DIR}/rootfs.cpio"
+CONFIG_OPENRISC_BUILTIN_DTB="or1ksim"
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_TMPFS=y
+CONFIG_NETDEVICES=y
+CONFIG_ETHOC=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_USB_SUPPORT is not set
diff --git a/board/qemu/or1k/linux-4.9.config b/board/qemu/or1k/linux-4.9.config
deleted file mode 100644
index 0a817b1..0000000
--- a/board/qemu/or1k/linux-4.9.config
+++ /dev/null
@@ -1,30 +0,0 @@
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="${BR_BINARIES_DIR}/rootfs.cpio"
-CONFIG_OPENRISC_BUILTIN_DTB="or1ksim"
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_TMPFS=y
-CONFIG_NETDEVICES=y
-CONFIG_ETHOC=y
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_SUPPORT is not set
diff --git a/board/qemu/or1k/patches/linux/0001-ld-or1k.patch b/board/qemu/or1k/patches/linux/0001-ld-or1k.patch
deleted file mode 100644
index aba2463..0000000
--- a/board/qemu/or1k/patches/linux/0001-ld-or1k.patch
+++ /dev/null
@@ -1,16 +0,0 @@
-OpenRISC arch name was in the beginning or32
-
-Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
-
-diff -Nur linux-4.4.5.orig/arch/openrisc/kernel/vmlinux.lds.S linux-4.4.5/arch/openrisc/kernel/vmlinux.lds.S
---- linux-4.4.5.orig/arch/openrisc/kernel/vmlinux.lds.S 2016-03-10 00:35:58.000000000 +0100
-+++ linux-4.4.5/arch/openrisc/kernel/vmlinux.lds.S 2016-03-16 09:21:07.933535532 +0100
-@@ -30,7 +30,7 @@
- #include <asm/cache.h>
- #include <asm-generic/vmlinux.lds.h>
-
--OUTPUT_FORMAT("elf32-or32", "elf32-or32", "elf32-or32")
-+OUTPUT_FORMAT("elf32-or1k", "elf32-or1k", "elf32-or1k")
- jiffies = jiffies_64 + 4;
-
- SECTIONS
diff --git a/board/qemu/or1k/patches/linux/0002-kallsyms.patch b/board/qemu/or1k/patches/linux/0002-kallsyms.patch
deleted file mode 100644
index e788a7a..0000000
--- a/board/qemu/or1k/patches/linux/0002-kallsyms.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From: https://lkml.org/lkml/2016/12/31/13
-
-The build robot reports:
-
- .tmp_kallsyms1.o: In function `kallsyms_relative_base':
->> (.rodata+0x8a18): undefined reference to `_text'
-
-This is when using 'make alldefconfig'. Adding this _text symbol to mark
-the start of the kernel as in other architecture fixes this.
-
-Signed-off-by: Stafford Horne <shorne@gmail.com>
-Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
-
-diff -Nur linux-4.9.orig/arch/openrisc/kernel/vmlinux.lds.S linux-4.9/arch/openrisc/kernel/vmlinux.lds.S
---- linux-4.9.orig/arch/openrisc/kernel/vmlinux.lds.S 2016-12-11 20:17:54.000000000 +0100
-+++ linux-4.9/arch/openrisc/kernel/vmlinux.lds.S 2017-01-01 12:13:43.039107518 +0100
-@@ -38,6 +38,8 @@
- /* Read-only sections, merged into text segment: */
- . = LOAD_BASE ;
-
-+ _text = .;
-+
- /* _s_kernel_ro must be page aligned */
- . = ALIGN(PAGE_SIZE);
- _s_kernel_ro = .;
diff --git a/board/qemu/or1k/readme.txt b/board/qemu/or1k/readme.txt
index 53c66ad..a04314e 100644
--- a/board/qemu/or1k/readme.txt
+++ b/board/qemu/or1k/readme.txt
@@ -1,9 +1,9 @@
Run the emulation with:
- qemu-system-or32 -kernel output/images/vmlinux -nographic
+ qemu-system-or1k -kernel output/images/vmlinux -nographic
The login prompt will appear in the terminal that started Qemu.
Ethernet support is not working, yet.
-Tested with QEMU 2.8.0.
+Tested with QEMU 2.9.0.
diff --git a/board/qemu/ppc-g3beige/linux-4.11.config b/board/qemu/ppc-g3beige/linux-4.11.config
new file mode 100644
index 0000000..7994553
--- /dev/null
+++ b/board/qemu/ppc-g3beige/linux-4.11.config
@@ -0,0 +1,25 @@
+CONFIG_ALTIVEC=y
+CONFIG_SYSVIPC=y
+CONFIG_HIGHMEM=y
+CONFIG_YENTA=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_CMD64X=y
+CONFIG_BLK_DEV_IDE_PMAC=y
+CONFIG_ADB=y
+CONFIG_ADB_CUDA=y
+CONFIG_ADB_PMU=y
+CONFIG_NETDEVICES=y
+CONFIG_PCNET32=y
+CONFIG_8139CP=y
+CONFIG_SERIAL_PMACZILOG=y
+CONFIG_SERIAL_PMACZILOG_TTYS=y
+CONFIG_SERIAL_PMACZILOG_CONSOLE=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_BOOTX_TEXT=y
diff --git a/board/qemu/ppc-g3beige/linux-4.9.config b/board/qemu/ppc-g3beige/linux-4.9.config
deleted file mode 100644
index 7994553..0000000
--- a/board/qemu/ppc-g3beige/linux-4.9.config
+++ /dev/null
@@ -1,25 +0,0 @@
-CONFIG_ALTIVEC=y
-CONFIG_SYSVIPC=y
-CONFIG_HIGHMEM=y
-CONFIG_YENTA=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_CMD64X=y
-CONFIG_BLK_DEV_IDE_PMAC=y
-CONFIG_ADB=y
-CONFIG_ADB_CUDA=y
-CONFIG_ADB_PMU=y
-CONFIG_NETDEVICES=y
-CONFIG_PCNET32=y
-CONFIG_8139CP=y
-CONFIG_SERIAL_PMACZILOG=y
-CONFIG_SERIAL_PMACZILOG_TTYS=y
-CONFIG_SERIAL_PMACZILOG_CONSOLE=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_BOOTX_TEXT=y
diff --git a/board/qemu/ppc-g3beige/readme.txt b/board/qemu/ppc-g3beige/readme.txt
index 3bd88a6..42c97a0 100644
--- a/board/qemu/ppc-g3beige/readme.txt
+++ b/board/qemu/ppc-g3beige/readme.txt
@@ -5,4 +5,4 @@ Run the emulation with:
The login prompt will appear in the terminal that started Qemu. The
graphical window is the framebuffer.
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0
diff --git a/board/qemu/ppc-mpc8544ds/linux-4.11.config b/board/qemu/ppc-mpc8544ds/linux-4.11.config
new file mode 100644
index 0000000..b36847c
--- /dev/null
+++ b/board/qemu/ppc-mpc8544ds/linux-4.11.config
@@ -0,0 +1,38 @@
+CONFIG_PPC_85xx=y
+CONFIG_PHYS_64BIT=y
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="${BR_BINARIES_DIR}/rootfs.cpio"
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MPC8540_ADS=y
+CONFIG_MPC85xx_DS=y
+CONFIG_HIGHMEM=y
+CONFIG_MATH_EMULATION=y
+CONFIG_PCI=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_MSI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=6
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_TMPFS=y
diff --git a/board/qemu/ppc-mpc8544ds/linux-4.9.config b/board/qemu/ppc-mpc8544ds/linux-4.9.config
deleted file mode 100644
index b36847c..0000000
--- a/board/qemu/ppc-mpc8544ds/linux-4.9.config
+++ /dev/null
@@ -1,38 +0,0 @@
-CONFIG_PPC_85xx=y
-CONFIG_PHYS_64BIT=y
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="${BR_BINARIES_DIR}/rootfs.cpio"
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MPC8540_ADS=y
-CONFIG_MPC85xx_DS=y
-CONFIG_HIGHMEM=y
-CONFIG_MATH_EMULATION=y
-CONFIG_PCI=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_MSI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_NETDEVICES=y
-CONFIG_E1000=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=6
-CONFIG_SERIAL_8250_RUNTIME_UARTS=6
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_TMPFS=y
diff --git a/board/qemu/ppc-mpc8544ds/readme.txt b/board/qemu/ppc-mpc8544ds/readme.txt
index d8f31cb..0008c84 100644
--- a/board/qemu/ppc-mpc8544ds/readme.txt
+++ b/board/qemu/ppc-mpc8544ds/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
The login prompt will appear in the terminal that started Qemu.
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0
diff --git a/board/qemu/ppc64-pseries/readme.txt b/board/qemu/ppc64-pseries/readme.txt
index 94fa228..7cc0c67 100644
--- a/board/qemu/ppc64-pseries/readme.txt
+++ b/board/qemu/ppc64-pseries/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
The login prompt will appear in the terminal that started Qemu.
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0
diff --git a/board/qemu/sh4-r2d/linux-4.11.config b/board/qemu/sh4-r2d/linux-4.11.config
new file mode 100644
index 0000000..a3d6544
--- /dev/null
+++ b/board/qemu/sh4-r2d/linux-4.11.config
@@ -0,0 +1,38 @@
+CONFIG_SYSVIPC=y
+CONFIG_MODULES=y
+CONFIG_CPU_SUBTYPE_SH7751R=y
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_RTS7751R2D=y
+CONFIG_RTS7751R2D_PLUS=y
+CONFIG_HEARTBEAT=y
+CONFIG_PCI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_PLATFORM=y
+CONFIG_NETDEVICES=y
+CONFIG_8139CP=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SPI=y
+CONFIG_SPI_SH_SCI=y
+CONFIG_MFD_SM501=y
+CONFIG_FB=y
+CONFIG_FB_SH_MOBILE_LCDC=y
+CONFIG_FB_SH_MOBILE_HDMI=y
+CONFIG_FB_SM501=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND_YMFPCI=y
+CONFIG_SOUND_PRIME=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_R9701=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
diff --git a/board/qemu/sh4-r2d/linux-4.9.config b/board/qemu/sh4-r2d/linux-4.9.config
deleted file mode 100644
index a3d6544..0000000
--- a/board/qemu/sh4-r2d/linux-4.9.config
+++ /dev/null
@@ -1,38 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_MODULES=y
-CONFIG_CPU_SUBTYPE_SH7751R=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_RTS7751R2D=y
-CONFIG_RTS7751R2D_PLUS=y
-CONFIG_HEARTBEAT=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_8139CP=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SPI=y
-CONFIG_SPI_SH_SCI=y
-CONFIG_MFD_SM501=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FB_SH_MOBILE_HDMI=y
-CONFIG_FB_SM501=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND_YMFPCI=y
-CONFIG_SOUND_PRIME=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_R9701=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
diff --git a/board/qemu/sh4eb-r2d/linux-4.11.config b/board/qemu/sh4eb-r2d/linux-4.11.config
new file mode 100644
index 0000000..6ead626
--- /dev/null
+++ b/board/qemu/sh4eb-r2d/linux-4.11.config
@@ -0,0 +1,38 @@
+CONFIG_SYSVIPC=y
+CONFIG_MODULES=y
+CONFIG_CPU_SUBTYPE_SH7751R=y
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_SH_RTS7751R2D=y
+CONFIG_RTS7751R2D_PLUS=y
+CONFIG_HEARTBEAT=y
+CONFIG_PCI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_PLATFORM=y
+CONFIG_NETDEVICES=y
+CONFIG_8139CP=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SPI=y
+CONFIG_SPI_SH_SCI=y
+CONFIG_MFD_SM501=y
+CONFIG_FB=y
+CONFIG_FB_SH_MOBILE_LCDC=y
+CONFIG_FB_SH_MOBILE_HDMI=y
+CONFIG_FB_SM501=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+CONFIG_SND_YMFPCI=y
+CONFIG_SOUND_PRIME=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_R9701=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
diff --git a/board/qemu/sh4eb-r2d/linux-4.9.config b/board/qemu/sh4eb-r2d/linux-4.9.config
deleted file mode 100644
index 6ead626..0000000
--- a/board/qemu/sh4eb-r2d/linux-4.9.config
+++ /dev/null
@@ -1,38 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_MODULES=y
-CONFIG_CPU_SUBTYPE_SH7751R=y
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_SH_RTS7751R2D=y
-CONFIG_RTS7751R2D_PLUS=y
-CONFIG_HEARTBEAT=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_8139CP=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SPI=y
-CONFIG_SPI_SH_SCI=y
-CONFIG_MFD_SM501=y
-CONFIG_FB=y
-CONFIG_FB_SH_MOBILE_LCDC=y
-CONFIG_FB_SH_MOBILE_HDMI=y
-CONFIG_FB_SM501=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SND_YMFPCI=y
-CONFIG_SOUND_PRIME=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_R9701=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
diff --git a/board/qemu/sparc-ss10/linux-4.11.config b/board/qemu/sparc-ss10/linux-4.11.config
new file mode 100644
index 0000000..cb8d01d
--- /dev/null
+++ b/board/qemu/sparc-ss10/linux-4.11.config
@@ -0,0 +1,31 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PCI=y
+CONFIG_SUN_OPENPROMFS=m
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_WIRELESS is not set
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_SUNESP=y
+CONFIG_NETDEVICES=y
+CONFIG_SUNLANCE=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_SUNKBD=y
+CONFIG_MOUSE_SERIAL=y
+CONFIG_SERIAL_SUNZILOG=y
+CONFIG_SERIAL_SUNZILOG_CONSOLE=y
+CONFIG_SERIAL_SUNSU=y
+CONFIG_SERIAL_SUNSU_CONSOLE=y
+CONFIG_SUN_OPENPROMIO=m
+CONFIG_EXT4_FS=y
+CONFIG_ISO9660_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
diff --git a/board/qemu/sparc-ss10/linux-4.9.config b/board/qemu/sparc-ss10/linux-4.9.config
deleted file mode 100644
index cb8d01d..0000000
--- a/board/qemu/sparc-ss10/linux-4.9.config
+++ /dev/null
@@ -1,31 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PCI=y
-CONFIG_SUN_OPENPROMFS=m
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_WIRELESS is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_SUNESP=y
-CONFIG_NETDEVICES=y
-CONFIG_SUNLANCE=y
-# CONFIG_WLAN is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_SUNKBD=y
-CONFIG_MOUSE_SERIAL=y
-CONFIG_SERIAL_SUNZILOG=y
-CONFIG_SERIAL_SUNZILOG_CONSOLE=y
-CONFIG_SERIAL_SUNSU=y
-CONFIG_SERIAL_SUNSU_CONSOLE=y
-CONFIG_SUN_OPENPROMIO=m
-CONFIG_EXT4_FS=y
-CONFIG_ISO9660_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
diff --git a/board/qemu/sparc-ss10/readme.txt b/board/qemu/sparc-ss10/readme.txt
index 5a07ee0..0ce461d 100644
--- a/board/qemu/sparc-ss10/readme.txt
+++ b/board/qemu/sparc-ss10/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
The login prompt will appear in the terminal that started Qemu.
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0
diff --git a/board/qemu/sparc64-sun4u/linux-4.11.config b/board/qemu/sparc64-sun4u/linux-4.11.config
new file mode 100644
index 0000000..0e1e168
--- /dev/null
+++ b/board/qemu/sparc64-sun4u/linux-4.11.config
@@ -0,0 +1,25 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_EMBEDDED=y
+CONFIG_MODULES=y
+CONFIG_PCI=y
+CONFIG_SUN_OPENPROMFS=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_CMD64X=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_SERIAL_SUNSU=y
+CONFIG_SERIAL_SUNSU_CONSOLE=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf-8"
+CONFIG_MAGIC_SYSRQ=y
diff --git a/board/qemu/sparc64-sun4u/linux-4.9.config b/board/qemu/sparc64-sun4u/linux-4.9.config
deleted file mode 100644
index 0e1e168..0000000
--- a/board/qemu/sparc64-sun4u/linux-4.9.config
+++ /dev/null
@@ -1,25 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_EMBEDDED=y
-CONFIG_MODULES=y
-CONFIG_PCI=y
-CONFIG_SUN_OPENPROMFS=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_PATA_CMD64X=y
-CONFIG_NETDEVICES=y
-CONFIG_E1000=y
-CONFIG_SERIAL_SUNSU=y
-CONFIG_SERIAL_SUNSU_CONSOLE=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf-8"
-CONFIG_MAGIC_SYSRQ=y
diff --git a/board/qemu/sparc64-sun4u/readme.txt b/board/qemu/sparc64-sun4u/readme.txt
index aaf96c3..adfff70 100644
--- a/board/qemu/sparc64-sun4u/readme.txt
+++ b/board/qemu/sparc64-sun4u/readme.txt
@@ -4,4 +4,4 @@ Run the emulation with:
The login prompt will appear in the terminal that started Qemu.
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0
diff --git a/board/qemu/x86/linux-4.11.config b/board/qemu/x86/linux-4.11.config
new file mode 100644
index 0000000..e3bd145
--- /dev/null
+++ b/board/qemu/x86/linux-4.11.config
@@ -0,0 +1,45 @@
+CONFIG_SYSVIPC=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_SMP=y
+CONFIG_HYPERVISOR_GUEST=y
+CONFIG_PARAVIRT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_VIRTIO_BLK=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_VIRTIO=y
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_VIRTIO_NET=y
+CONFIG_NE2K_PCI=y
+CONFIG_8139CP=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_DRM=y
+CONFIG_DRM_BOCHS=y
+CONFIG_DRM_QXL=y
+CONFIG_DRM_VIRTIO_GPU=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_HDA_INTEL=y
+CONFIG_SND_HDA_GENERIC=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_BALLOON=y
+CONFIG_VIRTIO_INPUT=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
diff --git a/board/qemu/x86/linux-4.9.config b/board/qemu/x86/linux-4.9.config
deleted file mode 120000
index 44b2fa1..0000000
--- a/board/qemu/x86/linux-4.9.config
+++ /dev/null
@@ -1 +0,0 @@
-../x86_64/linux-4.9.config
\ No newline at end of file
diff --git a/board/qemu/x86/readme.txt b/board/qemu/x86/readme.txt
index 4f2e4c7..1750096 100644
--- a/board/qemu/x86/readme.txt
+++ b/board/qemu/x86/readme.txt
@@ -6,4 +6,4 @@ Optionally add -smp N to emulate a SMP system with N CPUs.
The login prompt will appear in the graphical window.
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0
diff --git a/board/qemu/x86_64/linux-4.11.config b/board/qemu/x86_64/linux-4.11.config
new file mode 100644
index 0000000..e3bd145
--- /dev/null
+++ b/board/qemu/x86_64/linux-4.11.config
@@ -0,0 +1,45 @@
+CONFIG_SYSVIPC=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_SMP=y
+CONFIG_HYPERVISOR_GUEST=y
+CONFIG_PARAVIRT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_VIRTIO_BLK=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_VIRTIO=y
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_VIRTIO_NET=y
+CONFIG_NE2K_PCI=y
+CONFIG_8139CP=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_DRM=y
+CONFIG_DRM_BOCHS=y
+CONFIG_DRM_QXL=y
+CONFIG_DRM_VIRTIO_GPU=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_HDA_INTEL=y
+CONFIG_SND_HDA_GENERIC=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_BALLOON=y
+CONFIG_VIRTIO_INPUT=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
diff --git a/board/qemu/x86_64/linux-4.9.config b/board/qemu/x86_64/linux-4.9.config
deleted file mode 100644
index e3bd145..0000000
--- a/board/qemu/x86_64/linux-4.9.config
+++ /dev/null
@@ -1,45 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SMP=y
-CONFIG_HYPERVISOR_GUEST=y
-CONFIG_PARAVIRT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_VIRTIO_BLK=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_VIRTIO=y
-CONFIG_ATA=y
-CONFIG_ATA_PIIX=y
-CONFIG_NETDEVICES=y
-CONFIG_VIRTIO_NET=y
-CONFIG_NE2K_PCI=y
-CONFIG_8139CP=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_VIRTIO_CONSOLE=y
-CONFIG_HW_RANDOM_VIRTIO=m
-CONFIG_DRM=y
-CONFIG_DRM_BOCHS=y
-CONFIG_DRM_QXL=y
-CONFIG_DRM_VIRTIO_GPU=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_HDA_INTEL=y
-CONFIG_SND_HDA_GENERIC=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTIO_BALLOON=y
-CONFIG_VIRTIO_INPUT=y
-CONFIG_VIRTIO_MMIO=y
-CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
-CONFIG_EXT4_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
diff --git a/board/qemu/x86_64/readme.txt b/board/qemu/x86_64/readme.txt
index 6ea28d3..ecd7813 100644
--- a/board/qemu/x86_64/readme.txt
+++ b/board/qemu/x86_64/readme.txt
@@ -6,4 +6,4 @@ Optionally add -smp N to emulate a SMP system with N CPUs.
The login prompt will appear in the graphical window.
-Tested with QEMU 2.5.0
+Tested with QEMU 2.9.0
diff --git a/board/qemu/xtensa-lx60/linux-4.11-nommu.config b/board/qemu/xtensa-lx60/linux-4.11-nommu.config
new file mode 100644
index 0000000..10f7ee1
--- /dev/null
+++ b/board/qemu/xtensa-lx60/linux-4.11-nommu.config
@@ -0,0 +1,38 @@
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_XTENSA_VARIANT_CUSTOM=y
+CONFIG_XTENSA_VARIANT_CUSTOM_NAME="dc233c"
+# CONFIG_XTENSA_VARIANT_MMU is not set
+CONFIG_XTENSA_UNALIGNED_USER=y
+CONFIG_PREEMPT=y
+CONFIG_KERNEL_LOAD_ADDRESS=0x00003000
+# CONFIG_PCI is not set
+CONFIG_XTENSA_PLATFORM_XTFPGA=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="earlycon=uart8250,mmio32,0xfd050020,115200n8 console=ttyS0,115200n8 memmap=0x04000000 at 0"
+CONFIG_DEFAULT_MEM_START=0x00000000
+CONFIG_BINFMT_FLAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+CONFIG_DNS_RESOLVER=y
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_NETDEVICES=y
+CONFIG_MARVELL_PHY=y
+# CONFIG_WLAN is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_TMPFS=y
+CONFIG_FANOTIFY=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_S32C1I_SELFTEST is not set
diff --git a/board/qemu/xtensa-lx60/linux-4.11.config b/board/qemu/xtensa-lx60/linux-4.11.config
new file mode 100644
index 0000000..625b860
--- /dev/null
+++ b/board/qemu/xtensa-lx60/linux-4.11.config
@@ -0,0 +1,36 @@
+# CONFIG_SWAP is not set
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_XTENSA_VARIANT_DC233C=y
+CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX=y
+CONFIG_XTENSA_PLATFORM_XTFPGA=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyS0,38400 memmap=0x04000000 at 0"
+# CONFIG_COMPACTION is not set
+# CONFIG_BOUNCE is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_NETDEVICES=y
+# CONFIG_WLAN is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_LD_NO_RELAX=y
+# CONFIG_S32C1I_SELFTEST is not set
diff --git a/board/qemu/xtensa-lx60/linux-4.9-nommu.config b/board/qemu/xtensa-lx60/linux-4.9-nommu.config
deleted file mode 100644
index 10f7ee1..0000000
--- a/board/qemu/xtensa-lx60/linux-4.9-nommu.config
+++ /dev/null
@@ -1,38 +0,0 @@
-CONFIG_NO_HZ_IDLE=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_XTENSA_VARIANT_CUSTOM=y
-CONFIG_XTENSA_VARIANT_CUSTOM_NAME="dc233c"
-# CONFIG_XTENSA_VARIANT_MMU is not set
-CONFIG_XTENSA_UNALIGNED_USER=y
-CONFIG_PREEMPT=y
-CONFIG_KERNEL_LOAD_ADDRESS=0x00003000
-# CONFIG_PCI is not set
-CONFIG_XTENSA_PLATFORM_XTFPGA=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="earlycon=uart8250,mmio32,0xfd050020,115200n8 console=ttyS0,115200n8 memmap=0x04000000 at 0"
-CONFIG_DEFAULT_MEM_START=0x00000000
-CONFIG_BINFMT_FLAT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_DNS_RESOLVER=y
-# CONFIG_WIRELESS is not set
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_NETDEVICES=y
-CONFIG_MARVELL_PHY=y
-# CONFIG_WLAN is not set
-CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_TMPFS=y
-CONFIG_FANOTIFY=y
-CONFIG_PRINTK_TIME=y
-# CONFIG_S32C1I_SELFTEST is not set
diff --git a/board/qemu/xtensa-lx60/linux-4.9.config b/board/qemu/xtensa-lx60/linux-4.9.config
deleted file mode 100644
index 625b860..0000000
--- a/board/qemu/xtensa-lx60/linux-4.9.config
+++ /dev/null
@@ -1,36 +0,0 @@
-# CONFIG_SWAP is not set
-# CONFIG_CROSS_MEMORY_ATTACH is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_XTENSA_VARIANT_DC233C=y
-CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX=y
-CONFIG_XTENSA_PLATFORM_XTFPGA=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0,38400 memmap=0x04000000 at 0"
-# CONFIG_COMPACTION is not set
-# CONFIG_BOUNCE is not set
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_NETDEVICES=y
-# CONFIG_WLAN is not set
-CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_LD_NO_RELAX=y
-# CONFIG_S32C1I_SELFTEST is not set
diff --git a/board/qemu/xtensa-lx60/linux/linux-0001-disable-redboot-and-uboot.patch b/board/qemu/xtensa-lx60/linux/linux-0001-disable-redboot-and-uboot.patch
deleted file mode 100644
index c0ccf48..0000000
--- a/board/qemu/xtensa-lx60/linux/linux-0001-disable-redboot-and-uboot.patch
+++ /dev/null
@@ -1,16 +0,0 @@
-disable boot-uboot and boot-redboot, requires a patched u-boot and mkimage
-
-Signed-off-by:Waldemar Brodkorb <wbx@openadk.org>
-
-diff -Nur linux-3.15.orig/arch/xtensa/boot/Makefile linux-3.15/arch/xtensa/boot/Makefile
---- linux-3.15.orig/arch/xtensa/boot/Makefile 2014-06-08 20:19:54.000000000 +0200
-+++ linux-3.15/arch/xtensa/boot/Makefile 2014-06-14 20:07:15.206091165 +0200
-@@ -23,7 +23,7 @@
-
- bootdir-$(CONFIG_XTENSA_PLATFORM_ISS) += boot-elf
- bootdir-$(CONFIG_XTENSA_PLATFORM_XT2000) += boot-redboot boot-elf boot-uboot
--bootdir-$(CONFIG_XTENSA_PLATFORM_XTFPGA) += boot-redboot boot-elf boot-uboot
-+bootdir-$(CONFIG_XTENSA_PLATFORM_XTFPGA) += boot-elf
-
- zImage Image: $(bootdir-y)
-
diff --git a/board/qemu/xtensa-lx60/readme.txt b/board/qemu/xtensa-lx60/readme.txt
index be77345..9a82c53 100644
--- a/board/qemu/xtensa-lx60/readme.txt
+++ b/board/qemu/xtensa-lx60/readme.txt
@@ -4,5 +4,4 @@ Run the emulation with:
The login prompt will appear in the terminal that started Qemu.
-Tested with QEMU 2.6.0
-Known to fail with 2.5.0
+Tested with QEMU 2.9.0
diff --git a/configs/qemu_aarch64_virt_defconfig b/configs/qemu_aarch64_virt_defconfig
index 222c69e..1ef4405 100644
--- a/configs/qemu_aarch64_virt_defconfig
+++ b/configs/qemu_aarch64_virt_defconfig
@@ -9,12 +9,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux-4.11.config"
diff --git a/configs/qemu_arm_versatile_defconfig b/configs/qemu_arm_versatile_defconfig
index afeef75..9845ec6 100644
--- a/configs/qemu_arm_versatile_defconfig
+++ b/configs/qemu_arm_versatile_defconfig
@@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.11.config"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="versatile-pb"
diff --git a/configs/qemu_arm_versatile_nommu_defconfig b/configs/qemu_arm_versatile_nommu_defconfig
index 6cc646b..9c48172 100644
--- a/configs/qemu_arm_versatile_nommu_defconfig
+++ b/configs/qemu_arm_versatile_nommu_defconfig
@@ -27,6 +27,6 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_4=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.4.45"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.4.70"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.4-nommu.config"
diff --git a/configs/qemu_arm_vexpress_defconfig b/configs/qemu_arm_vexpress_defconfig
index f8dd5a0..faba6a6 100644
--- a/configs/qemu_arm_vexpress_defconfig
+++ b/configs/qemu_arm_vexpress_defconfig
@@ -13,13 +13,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_DEFCONFIG="vexpress"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="vexpress-v2p-ca9"
diff --git a/configs/qemu_m68k_mcf5208_defconfig b/configs/qemu_m68k_mcf5208_defconfig
index a5ebf15..ccbdcfa 100644
--- a/configs/qemu_m68k_mcf5208_defconfig
+++ b/configs/qemu_m68k_mcf5208_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_INITRAMFS=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.17"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-mcf5208/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-mcf5208/linux-4.11.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
diff --git a/configs/qemu_m68k_q800_defconfig b/configs/qemu_m68k_q800_defconfig
index 7bba7ef..6dc50a7 100644
--- a/configs/qemu_m68k_q800_defconfig
+++ b/configs/qemu_m68k_q800_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-q800/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-q800/linux-4.11.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
diff --git a/configs/qemu_microblazebe_mmu_defconfig b/configs/qemu_microblazebe_mmu_defconfig
index 3af8ad9..ae736ff 100644
--- a/configs/qemu_microblazebe_mmu_defconfig
+++ b/configs/qemu_microblazebe_mmu_defconfig
@@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-4.11.config"
BR2_LINUX_KERNEL_LINUX_BIN=y
BR2_LINUX_KERNEL_PATCH="board/qemu/microblazebe-mmu/xilinx-xemaclite.patch"
diff --git a/configs/qemu_microblazeel_mmu_defconfig b/configs/qemu_microblazeel_mmu_defconfig
index 6bda8cc..3dedecf 100644
--- a/configs/qemu_microblazeel_mmu_defconfig
+++ b/configs/qemu_microblazeel_mmu_defconfig
@@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-4.11.config"
BR2_LINUX_KERNEL_LINUX_BIN=y
BR2_LINUX_KERNEL_PATCH="board/qemu/microblazeel-mmu/xilinx-xemaclite.patch"
diff --git a/configs/qemu_mips32r2_malta_defconfig b/configs/qemu_mips32r2_malta_defconfig
index efac1f2..db408b0 100644
--- a/configs/qemu_mips32r2_malta_defconfig
+++ b/configs/qemu_mips32r2_malta_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2-malta/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2-malta/linux-4.11.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
diff --git a/configs/qemu_mips32r2el_malta_defconfig b/configs/qemu_mips32r2el_malta_defconfig
index 066c897..ccec419 100644
--- a/configs/qemu_mips32r2el_malta_defconfig
+++ b/configs/qemu_mips32r2el_malta_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2el-malta/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2el-malta/linux-4.11.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
diff --git a/configs/qemu_mips32r6_malta_defconfig b/configs/qemu_mips32r6_malta_defconfig
index 898477b..3aee84c 100644
--- a/configs/qemu_mips32r6_malta_defconfig
+++ b/configs/qemu_mips32r6_malta_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6-malta/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6-malta/linux-4.11.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Compiler
diff --git a/configs/qemu_mips32r6el_malta_defconfig b/configs/qemu_mips32r6el_malta_defconfig
index a082167..aa43dce 100644
--- a/configs/qemu_mips32r6el_malta_defconfig
+++ b/configs/qemu_mips32r6el_malta_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6el-malta/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6el-malta/linux-4.11.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Compiler
diff --git a/configs/qemu_mips64_malta_defconfig b/configs/qemu_mips64_malta_defconfig
index 7c40063..52e4299 100644
--- a/configs/qemu_mips64_malta_defconfig
+++ b/configs/qemu_mips64_malta_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.17"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-4.11.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
diff --git a/configs/qemu_mips64el_malta_defconfig b/configs/qemu_mips64el_malta_defconfig
index e957045..2b35c1a 100644
--- a/configs/qemu_mips64el_malta_defconfig
+++ b/configs/qemu_mips64el_malta_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-4.11.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
diff --git a/configs/qemu_mips64r6_malta_defconfig b/configs/qemu_mips64r6_malta_defconfig
index dccdc16..06c0133 100644
--- a/configs/qemu_mips64r6_malta_defconfig
+++ b/configs/qemu_mips64r6_malta_defconfig
@@ -10,15 +10,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6-malta/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6-malta/linux-4.11.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Compiler
diff --git a/configs/qemu_mips64r6el_malta_defconfig b/configs/qemu_mips64r6el_malta_defconfig
index 8bbc114..e80e728 100644
--- a/configs/qemu_mips64r6el_malta_defconfig
+++ b/configs/qemu_mips64r6el_malta_defconfig
@@ -10,15 +10,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6el-malta/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6el-malta/linux-4.11.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Compiler
diff --git a/configs/qemu_nios2_10m50_defconfig b/configs/qemu_nios2_10m50_defconfig
index 345a6e5..a9eaf08 100644
--- a/configs/qemu_nios2_10m50_defconfig
+++ b/configs/qemu_nios2_10m50_defconfig
@@ -1,10 +1,10 @@
BR2_nios2=y
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_DEFCONFIG="10m50"
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/qemu/nios2-10m50/linux-4.9.fragment"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/qemu/nios2-10m50/linux-4.11.fragment"
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
diff --git a/configs/qemu_or1k_defconfig b/configs/qemu_or1k_defconfig
index 4f70285..0eb1916 100644
--- a/configs/qemu_or1k_defconfig
+++ b/configs/qemu_or1k_defconfig
@@ -1,19 +1,16 @@
# Architecture
BR2_or1k=y
-# Patches
-BR2_GLOBAL_PATCH_DIR="board/qemu/or1k/patches"
-
# Filesystem
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Linux headers same as kernel, a 4,9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4,11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/or1k/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/or1k/linux-4.11.config"
diff --git a/configs/qemu_ppc64_pseries_defconfig b/configs/qemu_ppc64_pseries_defconfig
index c15de3b..7af20e9 100644
--- a/configs/qemu_ppc64_pseries_defconfig
+++ b/configs/qemu_ppc64_pseries_defconfig
@@ -10,12 +10,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="hvc0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_DEFCONFIG="pseries"
BR2_LINUX_KERNEL_VMLINUX=y
diff --git a/configs/qemu_ppc_g3beige_defconfig b/configs/qemu_ppc_g3beige_defconfig
index 58d4dfc..9482aaa 100644
--- a/configs/qemu_ppc_g3beige_defconfig
+++ b/configs/qemu_ppc_g3beige_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-g3beige/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-g3beige/linux-4.11.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
diff --git a/configs/qemu_ppc_mpc8544ds_defconfig b/configs/qemu_ppc_mpc8544ds_defconfig
index 0252da7..d2d92b6 100644
--- a/configs/qemu_ppc_mpc8544ds_defconfig
+++ b/configs/qemu_ppc_mpc8544ds_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-mpc8544ds/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-mpc8544ds/linux-4.11.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
diff --git a/configs/qemu_sparc64_sun4u_defconfig b/configs/qemu_sparc64_sun4u_defconfig
index ef2d22f..1f4df06 100644
--- a/configs/qemu_sparc64_sun4u_defconfig
+++ b/configs/qemu_sparc64_sun4u_defconfig
@@ -9,12 +9,12 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Linux kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc64-sun4u/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc64-sun4u/linux-4.11.config"
diff --git a/configs/qemu_sparc_ss10_defconfig b/configs/qemu_sparc_ss10_defconfig
index 1d6c951..b492f88 100644
--- a/configs/qemu_sparc_ss10_defconfig
+++ b/configs/qemu_sparc_ss10_defconfig
@@ -9,12 +9,12 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Linux kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc-ss10/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc-ss10/linux-4.11.config"
diff --git a/configs/qemu_x86_64_defconfig b/configs/qemu_x86_64_defconfig
index 7002d5e..aa17ace 100644
--- a/configs/qemu_x86_64_defconfig
+++ b/configs/qemu_x86_64_defconfig
@@ -9,12 +9,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.11.config"
diff --git a/configs/qemu_x86_defconfig b/configs/qemu_x86_defconfig
index 99ca604..c023a8e 100644
--- a/configs/qemu_x86_defconfig
+++ b/configs/qemu_x86_defconfig
@@ -10,12 +10,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-4.11.config"
diff --git a/configs/qemu_xtensa_lx60_defconfig b/configs/qemu_xtensa_lx60_defconfig
index 915b6ff..3e98222 100644
--- a/configs/qemu_xtensa_lx60_defconfig
+++ b/configs/qemu_xtensa_lx60_defconfig
@@ -5,9 +5,6 @@ BR2_XTENSA_CUSTOM_NAME="dc233c"
BR2_XTENSA_CORE_NAME="lx60"
BR2_XTENSA_OVERLAY_DIR="board/qemu/xtensa-lx60"
-# Patches
-BR2_GLOBAL_PATCH_DIR="board/qemu/xtensa-lx60"
-
# System
BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
@@ -16,15 +13,15 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.16"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.11.config"
BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
BR2_LINUX_KERNEL_IMAGE_NAME="Image.elf"
-BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="zImage"
+BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="Image"
diff --git a/configs/qemu_xtensa_lx60_nommu_defconfig b/configs/qemu_xtensa_lx60_nommu_defconfig
index 8c66c3a..998cd2a 100644
--- a/configs/qemu_xtensa_lx60_nommu_defconfig
+++ b/configs/qemu_xtensa_lx60_nommu_defconfig
@@ -9,9 +9,6 @@ BR2_XTENSA_OVERLAY_DIR="board/qemu/xtensa-lx60"
BR2_PACKAGE_HOST_ELF2FLT=y
# BR2_USE_MMU is not set
-# Patches
-BR2_GLOBAL_PATCH_DIR="board/qemu/xtensa-lx60"
-
# System
BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
@@ -20,15 +17,15 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Linux headers same as kernel, a 4.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
+# Linux headers same as kernel, a 4.11 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.16"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.3"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.9-nommu.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.11-nommu.config"
BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
BR2_LINUX_KERNEL_IMAGE_NAME="Image.elf"
-BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="zImage"
+BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="Image"
--
2.1.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [Buildroot] [PATCH] configs/qemu: bump to the latest kernel version
2017-01-31 10:35 Gustavo Zacarias
@ 2017-01-31 13:26 ` Peter Korsgaard
0 siblings, 0 replies; 6+ messages in thread
From: Peter Korsgaard @ 2017-01-31 13:26 UTC (permalink / raw)
To: buildroot
>>>>> "Gustavo" == Gustavo Zacarias <gustavo@zacarias.com.ar> writes:
> Also bump the pc samples since they're tied to the (base) qemu config.
> Results table:
> Defconfig Kernel Qemu Network Status
> --------------------------------------------------------------
> aarch64_virt 4.9.6 2.6.0 YES OK (3)
> arm_versatile 4.9.6 2.5.0 YES OK
> arm_versatile_nommu 4.4.45 2.5.0 YES OK
> arm_vexpress 4.9.6 2.5.0 YES OK
> m68k_mcf5208 4.8.17 2.5.0 YES OK (6)
> m68k_q800 4.9.6 q800-v2.4.0 NO (2) OK
> microblazebe 4.9.6 2.5.0 YES OK
> microblazeel 4.9.6 2.5.0 YES OK
> mips32r2el_malta 4.9.6 2.5.0 YES OK
> mips32r2_malta 4.9.6 2.5.0 YES OK
> mips32r6el_malta 4.9.6 2.6.0 YES OK (3)
> mips32r6_malta 4.9.6 2.6.0 YES OK (3)
> mips64el_malta 4.9.6 2.5.0 YES OK
> mips64_malta 4.8.17 2.5.0 YES OK (6)
> mips64r6el_malta 4.9.6 2.7.0 YES OK (3)(4)
> mips64r6_malta 4.9.6 2.7.0 YES OK (3)(4)
> nios2-10m50 4.9.6 2.9.0 NO OK
> or1k 4.9.6 2.5.0 NO OK
> ppc_g3beige 4.9.6 2.5.0 YES OK
> ppc_mpc8544ds 4.9.6 2.5.0 YES OK
> ppc_virtex_ml507 4.9.6 2.5.0 NO OK
> ppc64_pseries 4.9.6 2.5.0 YES OK
> sh4 4.9.6 2.5.0 YES OK
> sh4eb 4.9.6 2.5.0 NO (1) OK
> sparc_ss10 4.9.6 2.5.0 YES OK
> sparc64_sun4u 4.9.6 2.5.0 YES OK
> sparc_sun4u 4.9.6 2.5.0 YES OK
> x86 4.9.6 2.5.0 YES OK
> x86_64 4.9.6 2.5.0 YES OK
> xtensa_lx60 4.8.17 2.6.0 YES OK (6)
> xtensa_lx60_nommu 4.8.17 2.6.0 YES OK (5)
> (1) - Probably an endian issue with 8139 emulation/driver
> (2) - There's a network interface, but enabling it in qemu fails
> (3) - Known to fail with qemu versions lower than 2.6.0
> (4) - Might work with 2.6.0, but the cpu definition changed in 2.7.0
> (5) - Kept back on 4.8.x series since 4.9.x fails to build
> (6) - Kept back on 4.8.x series since 4.9.x fails to boot
Committed, thanks!
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Buildroot] [PATCH] configs/qemu: bump to the latest kernel version
@ 2017-01-31 10:35 Gustavo Zacarias
2017-01-31 13:26 ` Peter Korsgaard
0 siblings, 1 reply; 6+ messages in thread
From: Gustavo Zacarias @ 2017-01-31 10:35 UTC (permalink / raw)
To: buildroot
Also bump the pc samples since they're tied to the (base) qemu config.
Results table:
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.9.6 2.6.0 YES OK (3)
arm_versatile 4.9.6 2.5.0 YES OK
arm_versatile_nommu 4.4.45 2.5.0 YES OK
arm_vexpress 4.9.6 2.5.0 YES OK
m68k_mcf5208 4.8.17 2.5.0 YES OK (6)
m68k_q800 4.9.6 q800-v2.4.0 NO (2) OK
microblazebe 4.9.6 2.5.0 YES OK
microblazeel 4.9.6 2.5.0 YES OK
mips32r2el_malta 4.9.6 2.5.0 YES OK
mips32r2_malta 4.9.6 2.5.0 YES OK
mips32r6el_malta 4.9.6 2.6.0 YES OK (3)
mips32r6_malta 4.9.6 2.6.0 YES OK (3)
mips64el_malta 4.9.6 2.5.0 YES OK
mips64_malta 4.8.17 2.5.0 YES OK (6)
mips64r6el_malta 4.9.6 2.7.0 YES OK (3)(4)
mips64r6_malta 4.9.6 2.7.0 YES OK (3)(4)
nios2-10m50 4.9.6 2.9.0 NO OK
or1k 4.9.6 2.5.0 NO OK
ppc_g3beige 4.9.6 2.5.0 YES OK
ppc_mpc8544ds 4.9.6 2.5.0 YES OK
ppc_virtex_ml507 4.9.6 2.5.0 NO OK
ppc64_pseries 4.9.6 2.5.0 YES OK
sh4 4.9.6 2.5.0 YES OK
sh4eb 4.9.6 2.5.0 NO (1) OK
sparc_ss10 4.9.6 2.5.0 YES OK
sparc64_sun4u 4.9.6 2.5.0 YES OK
sparc_sun4u 4.9.6 2.5.0 YES OK
x86 4.9.6 2.5.0 YES OK
x86_64 4.9.6 2.5.0 YES OK
xtensa_lx60 4.8.17 2.6.0 YES OK (6)
xtensa_lx60_nommu 4.8.17 2.6.0 YES OK (5)
(1) - Probably an endian issue with 8139 emulation/driver
(2) - There's a network interface, but enabling it in qemu fails
(3) - Known to fail with qemu versions lower than 2.6.0
(4) - Might work with 2.6.0, but the cpu definition changed in 2.7.0
(5) - Kept back on 4.8.x series since 4.9.x fails to build
(6) - Kept back on 4.8.x series since 4.9.x fails to boot
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
---
board/qemu/aarch64-virt/{linux-4.8.config => linux-4.9.config} | 0
board/qemu/arm-versatile/{linux-4.8.config => linux-4.9.config} | 0
board/qemu/m68k-q800/{linux-4.8.config => linux-4.9.config} | 0
.../qemu/microblazebe-mmu/{linux-4.8.config => linux-4.9.config} | 0
.../qemu/microblazeel-mmu/{linux-4.8.config => linux-4.9.config} | 0
board/qemu/mips32r2-malta/{linux-4.8.config => linux-4.9.config} | 0
.../qemu/mips32r2el-malta/{linux-4.8.config => linux-4.9.config} | 0
board/qemu/mips32r6-malta/{linux-4.8.config => linux-4.9.config} | 0
.../qemu/mips32r6el-malta/{linux-4.8.config => linux-4.9.config} | 0
board/qemu/mips64el-malta/{linux-4.8.config => linux-4.9.config} | 0
board/qemu/mips64r6-malta/{linux-4.8.config => linux-4.9.config} | 0
.../qemu/mips64r6el-malta/{linux-4.8.config => linux-4.9.config} | 0
board/qemu/ppc-g3beige/{linux-4.8.config => linux-4.9.config} | 0
board/qemu/ppc-mpc8544ds/{linux-4.8.config => linux-4.9.config} | 0
.../qemu/ppc-virtex-ml507/{linux-4.8.config => linux-4.9.config} | 0
board/qemu/sh4-r2d/{linux-4.8.config => linux-4.9.config} | 0
board/qemu/sh4eb-r2d/{linux-4.8.config => linux-4.9.config} | 0
board/qemu/sparc-ss10/{linux-4.8.config => linux-4.9.config} | 0
board/qemu/sparc64-sun4u/{linux-4.8.config => linux-4.9.config} | 0
board/qemu/x86/linux-4.8.config | 1 -
board/qemu/x86/linux-4.9.config | 1 +
board/qemu/x86_64/{linux-4.8.config => linux-4.9.config} | 0
configs/pc_x86_64_bios_defconfig | 8 ++++----
configs/pc_x86_64_efi_defconfig | 8 ++++----
configs/qemu_aarch64_virt_defconfig | 8 ++++----
configs/qemu_arm_versatile_defconfig | 8 ++++----
configs/qemu_arm_versatile_nommu_defconfig | 2 +-
configs/qemu_arm_vexpress_defconfig | 6 +++---
configs/qemu_m68k_mcf5208_defconfig | 2 +-
configs/qemu_m68k_q800_defconfig | 8 ++++----
configs/qemu_microblazebe_mmu_defconfig | 8 ++++----
configs/qemu_microblazeel_mmu_defconfig | 8 ++++----
configs/qemu_mips32r2_malta_defconfig | 8 ++++----
configs/qemu_mips32r2el_malta_defconfig | 8 ++++----
configs/qemu_mips32r6_malta_defconfig | 8 ++++----
configs/qemu_mips32r6el_malta_defconfig | 8 ++++----
configs/qemu_mips64_malta_defconfig | 2 +-
configs/qemu_mips64el_malta_defconfig | 8 ++++----
configs/qemu_mips64r6_malta_defconfig | 8 ++++----
configs/qemu_mips64r6el_malta_defconfig | 8 ++++----
configs/qemu_nios2_10m50_defconfig | 2 +-
configs/qemu_or1k_defconfig | 2 +-
configs/qemu_ppc64_pseries_defconfig | 6 +++---
configs/qemu_ppc_g3beige_defconfig | 8 ++++----
configs/qemu_ppc_mpc8544ds_defconfig | 8 ++++----
configs/qemu_ppc_virtex_ml507_defconfig | 8 ++++----
configs/qemu_sh4_r2d_defconfig | 8 ++++----
configs/qemu_sh4eb_r2d_defconfig | 8 ++++----
configs/qemu_sparc64_sun4u_defconfig | 8 ++++----
configs/qemu_sparc_ss10_defconfig | 8 ++++----
configs/qemu_x86_64_defconfig | 8 ++++----
configs/qemu_x86_defconfig | 8 ++++----
configs/qemu_xtensa_lx60_defconfig | 4 ++--
configs/qemu_xtensa_lx60_nommu_defconfig | 2 +-
54 files changed, 107 insertions(+), 107 deletions(-)
rename board/qemu/aarch64-virt/{linux-4.8.config => linux-4.9.config} (100%)
rename board/qemu/arm-versatile/{linux-4.8.config => linux-4.9.config} (100%)
rename board/qemu/m68k-q800/{linux-4.8.config => linux-4.9.config} (100%)
rename board/qemu/microblazebe-mmu/{linux-4.8.config => linux-4.9.config} (100%)
rename board/qemu/microblazeel-mmu/{linux-4.8.config => linux-4.9.config} (100%)
rename board/qemu/mips32r2-malta/{linux-4.8.config => linux-4.9.config} (100%)
rename board/qemu/mips32r2el-malta/{linux-4.8.config => linux-4.9.config} (100%)
rename board/qemu/mips32r6-malta/{linux-4.8.config => linux-4.9.config} (100%)
rename board/qemu/mips32r6el-malta/{linux-4.8.config => linux-4.9.config} (100%)
rename board/qemu/mips64el-malta/{linux-4.8.config => linux-4.9.config} (100%)
rename board/qemu/mips64r6-malta/{linux-4.8.config => linux-4.9.config} (100%)
rename board/qemu/mips64r6el-malta/{linux-4.8.config => linux-4.9.config} (100%)
rename board/qemu/ppc-g3beige/{linux-4.8.config => linux-4.9.config} (100%)
rename board/qemu/ppc-mpc8544ds/{linux-4.8.config => linux-4.9.config} (100%)
rename board/qemu/ppc-virtex-ml507/{linux-4.8.config => linux-4.9.config} (100%)
rename board/qemu/sh4-r2d/{linux-4.8.config => linux-4.9.config} (100%)
rename board/qemu/sh4eb-r2d/{linux-4.8.config => linux-4.9.config} (100%)
rename board/qemu/sparc-ss10/{linux-4.8.config => linux-4.9.config} (100%)
rename board/qemu/sparc64-sun4u/{linux-4.8.config => linux-4.9.config} (100%)
delete mode 120000 board/qemu/x86/linux-4.8.config
create mode 120000 board/qemu/x86/linux-4.9.config
rename board/qemu/x86_64/{linux-4.8.config => linux-4.9.config} (100%)
diff --git a/board/qemu/aarch64-virt/linux-4.8.config b/board/qemu/aarch64-virt/linux-4.9.config
similarity index 100%
rename from board/qemu/aarch64-virt/linux-4.8.config
rename to board/qemu/aarch64-virt/linux-4.9.config
diff --git a/board/qemu/arm-versatile/linux-4.8.config b/board/qemu/arm-versatile/linux-4.9.config
similarity index 100%
rename from board/qemu/arm-versatile/linux-4.8.config
rename to board/qemu/arm-versatile/linux-4.9.config
diff --git a/board/qemu/m68k-q800/linux-4.8.config b/board/qemu/m68k-q800/linux-4.9.config
similarity index 100%
rename from board/qemu/m68k-q800/linux-4.8.config
rename to board/qemu/m68k-q800/linux-4.9.config
diff --git a/board/qemu/microblazebe-mmu/linux-4.8.config b/board/qemu/microblazebe-mmu/linux-4.9.config
similarity index 100%
rename from board/qemu/microblazebe-mmu/linux-4.8.config
rename to board/qemu/microblazebe-mmu/linux-4.9.config
diff --git a/board/qemu/microblazeel-mmu/linux-4.8.config b/board/qemu/microblazeel-mmu/linux-4.9.config
similarity index 100%
rename from board/qemu/microblazeel-mmu/linux-4.8.config
rename to board/qemu/microblazeel-mmu/linux-4.9.config
diff --git a/board/qemu/mips32r2-malta/linux-4.8.config b/board/qemu/mips32r2-malta/linux-4.9.config
similarity index 100%
rename from board/qemu/mips32r2-malta/linux-4.8.config
rename to board/qemu/mips32r2-malta/linux-4.9.config
diff --git a/board/qemu/mips32r2el-malta/linux-4.8.config b/board/qemu/mips32r2el-malta/linux-4.9.config
similarity index 100%
rename from board/qemu/mips32r2el-malta/linux-4.8.config
rename to board/qemu/mips32r2el-malta/linux-4.9.config
diff --git a/board/qemu/mips32r6-malta/linux-4.8.config b/board/qemu/mips32r6-malta/linux-4.9.config
similarity index 100%
rename from board/qemu/mips32r6-malta/linux-4.8.config
rename to board/qemu/mips32r6-malta/linux-4.9.config
diff --git a/board/qemu/mips32r6el-malta/linux-4.8.config b/board/qemu/mips32r6el-malta/linux-4.9.config
similarity index 100%
rename from board/qemu/mips32r6el-malta/linux-4.8.config
rename to board/qemu/mips32r6el-malta/linux-4.9.config
diff --git a/board/qemu/mips64el-malta/linux-4.8.config b/board/qemu/mips64el-malta/linux-4.9.config
similarity index 100%
rename from board/qemu/mips64el-malta/linux-4.8.config
rename to board/qemu/mips64el-malta/linux-4.9.config
diff --git a/board/qemu/mips64r6-malta/linux-4.8.config b/board/qemu/mips64r6-malta/linux-4.9.config
similarity index 100%
rename from board/qemu/mips64r6-malta/linux-4.8.config
rename to board/qemu/mips64r6-malta/linux-4.9.config
diff --git a/board/qemu/mips64r6el-malta/linux-4.8.config b/board/qemu/mips64r6el-malta/linux-4.9.config
similarity index 100%
rename from board/qemu/mips64r6el-malta/linux-4.8.config
rename to board/qemu/mips64r6el-malta/linux-4.9.config
diff --git a/board/qemu/ppc-g3beige/linux-4.8.config b/board/qemu/ppc-g3beige/linux-4.9.config
similarity index 100%
rename from board/qemu/ppc-g3beige/linux-4.8.config
rename to board/qemu/ppc-g3beige/linux-4.9.config
diff --git a/board/qemu/ppc-mpc8544ds/linux-4.8.config b/board/qemu/ppc-mpc8544ds/linux-4.9.config
similarity index 100%
rename from board/qemu/ppc-mpc8544ds/linux-4.8.config
rename to board/qemu/ppc-mpc8544ds/linux-4.9.config
diff --git a/board/qemu/ppc-virtex-ml507/linux-4.8.config b/board/qemu/ppc-virtex-ml507/linux-4.9.config
similarity index 100%
rename from board/qemu/ppc-virtex-ml507/linux-4.8.config
rename to board/qemu/ppc-virtex-ml507/linux-4.9.config
diff --git a/board/qemu/sh4-r2d/linux-4.8.config b/board/qemu/sh4-r2d/linux-4.9.config
similarity index 100%
rename from board/qemu/sh4-r2d/linux-4.8.config
rename to board/qemu/sh4-r2d/linux-4.9.config
diff --git a/board/qemu/sh4eb-r2d/linux-4.8.config b/board/qemu/sh4eb-r2d/linux-4.9.config
similarity index 100%
rename from board/qemu/sh4eb-r2d/linux-4.8.config
rename to board/qemu/sh4eb-r2d/linux-4.9.config
diff --git a/board/qemu/sparc-ss10/linux-4.8.config b/board/qemu/sparc-ss10/linux-4.9.config
similarity index 100%
rename from board/qemu/sparc-ss10/linux-4.8.config
rename to board/qemu/sparc-ss10/linux-4.9.config
diff --git a/board/qemu/sparc64-sun4u/linux-4.8.config b/board/qemu/sparc64-sun4u/linux-4.9.config
similarity index 100%
rename from board/qemu/sparc64-sun4u/linux-4.8.config
rename to board/qemu/sparc64-sun4u/linux-4.9.config
diff --git a/board/qemu/x86/linux-4.8.config b/board/qemu/x86/linux-4.8.config
deleted file mode 120000
index fca759e..0000000
--- a/board/qemu/x86/linux-4.8.config
+++ /dev/null
@@ -1 +0,0 @@
-../x86_64/linux-4.8.config
\ No newline at end of file
diff --git a/board/qemu/x86/linux-4.9.config b/board/qemu/x86/linux-4.9.config
new file mode 120000
index 0000000..44b2fa1
--- /dev/null
+++ b/board/qemu/x86/linux-4.9.config
@@ -0,0 +1 @@
+../x86_64/linux-4.9.config
\ No newline at end of file
diff --git a/board/qemu/x86_64/linux-4.8.config b/board/qemu/x86_64/linux-4.9.config
similarity index 100%
rename from board/qemu/x86_64/linux-4.8.config
rename to board/qemu/x86_64/linux-4.9.config
diff --git a/configs/pc_x86_64_bios_defconfig b/configs/pc_x86_64_bios_defconfig
index 242d3bf..23462ad 100644
--- a/configs/pc_x86_64_bios_defconfig
+++ b/configs/pc_x86_64_bios_defconfig
@@ -20,15 +20,15 @@ BR2_TARGET_ROOTFS_EXT2_4=y
# BR2_TARGET_ROOTFS_TAR is not set
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/pc/post-image.sh"
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.9.config"
BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/pc/linux-extras.config"
BR2_LINUX_KERNEL_INSTALL_TARGET=y
diff --git a/configs/pc_x86_64_efi_defconfig b/configs/pc_x86_64_efi_defconfig
index 118cc59..136b711 100644
--- a/configs/pc_x86_64_efi_defconfig
+++ b/configs/pc_x86_64_efi_defconfig
@@ -23,15 +23,15 @@ BR2_TARGET_ROOTFS_EXT2_4=y
# BR2_TARGET_ROOTFS_TAR is not set
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/pc/post-image.sh"
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.9.config"
BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/pc/linux-extras.config"
BR2_LINUX_KERNEL_INSTALL_TARGET=y
diff --git a/configs/qemu_aarch64_virt_defconfig b/configs/qemu_aarch64_virt_defconfig
index acde354..222c69e 100644
--- a/configs/qemu_aarch64_virt_defconfig
+++ b/configs/qemu_aarch64_virt_defconfig
@@ -9,12 +9,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux-4.9.config"
diff --git a/configs/qemu_arm_versatile_defconfig b/configs/qemu_arm_versatile_defconfig
index 452ed5f..afeef75 100644
--- a/configs/qemu_arm_versatile_defconfig
+++ b/configs/qemu_arm_versatile_defconfig
@@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.9.config"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="versatile-pb"
diff --git a/configs/qemu_arm_versatile_nommu_defconfig b/configs/qemu_arm_versatile_nommu_defconfig
index 49e4411..6cc646b 100644
--- a/configs/qemu_arm_versatile_nommu_defconfig
+++ b/configs/qemu_arm_versatile_nommu_defconfig
@@ -27,6 +27,6 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_4=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.4.22"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.4.45"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.4-nommu.config"
diff --git a/configs/qemu_arm_vexpress_defconfig b/configs/qemu_arm_vexpress_defconfig
index e841bac..f8dd5a0 100644
--- a/configs/qemu_arm_vexpress_defconfig
+++ b/configs/qemu_arm_vexpress_defconfig
@@ -13,13 +13,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
BR2_LINUX_KERNEL_DEFCONFIG="vexpress"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="vexpress-v2p-ca9"
diff --git a/configs/qemu_m68k_mcf5208_defconfig b/configs/qemu_m68k_mcf5208_defconfig
index c6c9098..a5ebf15 100644
--- a/configs/qemu_m68k_mcf5208_defconfig
+++ b/configs/qemu_m68k_mcf5208_defconfig
@@ -15,7 +15,7 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.17"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-mcf5208/linux-4.8.config"
BR2_LINUX_KERNEL_VMLINUX=y
diff --git a/configs/qemu_m68k_q800_defconfig b/configs/qemu_m68k_q800_defconfig
index 1d59d77..7bba7ef 100644
--- a/configs/qemu_m68k_q800_defconfig
+++ b/configs/qemu_m68k_q800_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-q800/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-q800/linux-4.9.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
diff --git a/configs/qemu_microblazebe_mmu_defconfig b/configs/qemu_microblazebe_mmu_defconfig
index 188304e..3af8ad9 100644
--- a/configs/qemu_microblazebe_mmu_defconfig
+++ b/configs/qemu_microblazebe_mmu_defconfig
@@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-4.9.config"
BR2_LINUX_KERNEL_LINUX_BIN=y
BR2_LINUX_KERNEL_PATCH="board/qemu/microblazebe-mmu/xilinx-xemaclite.patch"
diff --git a/configs/qemu_microblazeel_mmu_defconfig b/configs/qemu_microblazeel_mmu_defconfig
index 471d86a..6bda8cc 100644
--- a/configs/qemu_microblazeel_mmu_defconfig
+++ b/configs/qemu_microblazeel_mmu_defconfig
@@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-4.9.config"
BR2_LINUX_KERNEL_LINUX_BIN=y
BR2_LINUX_KERNEL_PATCH="board/qemu/microblazeel-mmu/xilinx-xemaclite.patch"
diff --git a/configs/qemu_mips32r2_malta_defconfig b/configs/qemu_mips32r2_malta_defconfig
index 16cc0ca..efac1f2 100644
--- a/configs/qemu_mips32r2_malta_defconfig
+++ b/configs/qemu_mips32r2_malta_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2-malta/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2-malta/linux-4.9.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
diff --git a/configs/qemu_mips32r2el_malta_defconfig b/configs/qemu_mips32r2el_malta_defconfig
index a66bdbd..066c897 100644
--- a/configs/qemu_mips32r2el_malta_defconfig
+++ b/configs/qemu_mips32r2el_malta_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2el-malta/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2el-malta/linux-4.9.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
diff --git a/configs/qemu_mips32r6_malta_defconfig b/configs/qemu_mips32r6_malta_defconfig
index a74c101..898477b 100644
--- a/configs/qemu_mips32r6_malta_defconfig
+++ b/configs/qemu_mips32r6_malta_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6-malta/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6-malta/linux-4.9.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Compiler
diff --git a/configs/qemu_mips32r6el_malta_defconfig b/configs/qemu_mips32r6el_malta_defconfig
index 5202e2c..a082167 100644
--- a/configs/qemu_mips32r6el_malta_defconfig
+++ b/configs/qemu_mips32r6el_malta_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6el-malta/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6el-malta/linux-4.9.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Compiler
diff --git a/configs/qemu_mips64_malta_defconfig b/configs/qemu_mips64_malta_defconfig
index 92bacc0..7c40063 100644
--- a/configs/qemu_mips64_malta_defconfig
+++ b/configs/qemu_mips64_malta_defconfig
@@ -15,7 +15,7 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.17"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-4.8.config"
BR2_LINUX_KERNEL_VMLINUX=y
diff --git a/configs/qemu_mips64el_malta_defconfig b/configs/qemu_mips64el_malta_defconfig
index d3cac61..e957045 100644
--- a/configs/qemu_mips64el_malta_defconfig
+++ b/configs/qemu_mips64el_malta_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-4.9.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
diff --git a/configs/qemu_mips64r6_malta_defconfig b/configs/qemu_mips64r6_malta_defconfig
index c68d887..dccdc16 100644
--- a/configs/qemu_mips64r6_malta_defconfig
+++ b/configs/qemu_mips64r6_malta_defconfig
@@ -10,15 +10,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6-malta/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6-malta/linux-4.9.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Compiler
diff --git a/configs/qemu_mips64r6el_malta_defconfig b/configs/qemu_mips64r6el_malta_defconfig
index c0ad304..8bbc114 100644
--- a/configs/qemu_mips64r6el_malta_defconfig
+++ b/configs/qemu_mips64r6el_malta_defconfig
@@ -10,15 +10,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6el-malta/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6el-malta/linux-4.9.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Compiler
diff --git a/configs/qemu_nios2_10m50_defconfig b/configs/qemu_nios2_10m50_defconfig
index d6b3e1f..a04a156 100644
--- a/configs/qemu_nios2_10m50_defconfig
+++ b/configs/qemu_nios2_10m50_defconfig
@@ -1,7 +1,7 @@
BR2_nios2=y
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.5"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
BR2_LINUX_KERNEL_DEFCONFIG="10m50"
BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/qemu/nios2-10m50/linux-4.9.fragment"
BR2_TARGET_ROOTFS_INITRAMFS=y
diff --git a/configs/qemu_or1k_defconfig b/configs/qemu_or1k_defconfig
index b2527b4..4f70285 100644
--- a/configs/qemu_or1k_defconfig
+++ b/configs/qemu_or1k_defconfig
@@ -14,6 +14,6 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/or1k/linux-4.9.config"
diff --git a/configs/qemu_ppc64_pseries_defconfig b/configs/qemu_ppc64_pseries_defconfig
index 810f6e6..c15de3b 100644
--- a/configs/qemu_ppc64_pseries_defconfig
+++ b/configs/qemu_ppc64_pseries_defconfig
@@ -10,12 +10,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="hvc0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
BR2_LINUX_KERNEL_DEFCONFIG="pseries"
BR2_LINUX_KERNEL_VMLINUX=y
diff --git a/configs/qemu_ppc_g3beige_defconfig b/configs/qemu_ppc_g3beige_defconfig
index d0cd2cc..58d4dfc 100644
--- a/configs/qemu_ppc_g3beige_defconfig
+++ b/configs/qemu_ppc_g3beige_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-g3beige/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-g3beige/linux-4.9.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
diff --git a/configs/qemu_ppc_mpc8544ds_defconfig b/configs/qemu_ppc_mpc8544ds_defconfig
index ed10eee..0252da7 100644
--- a/configs/qemu_ppc_mpc8544ds_defconfig
+++ b/configs/qemu_ppc_mpc8544ds_defconfig
@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-mpc8544ds/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-mpc8544ds/linux-4.9.config"
BR2_LINUX_KERNEL_VMLINUX=y
# Serial port config
diff --git a/configs/qemu_ppc_virtex_ml507_defconfig b/configs/qemu_ppc_virtex_ml507_defconfig
index c8571b6..84cb329 100644
--- a/configs/qemu_ppc_virtex_ml507_defconfig
+++ b/configs/qemu_ppc_virtex_ml507_defconfig
@@ -6,8 +6,8 @@ BR2_powerpc_440=y
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
# Use soft float
BR2_SOFT_FLOAT=y
@@ -15,9 +15,9 @@ BR2_SOFT_FLOAT=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-virtex-ml507/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-virtex-ml507/linux-4.9.config"
BR2_LINUX_KERNEL_VMLINUX=y
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="virtex440-ml507"
diff --git a/configs/qemu_sh4_r2d_defconfig b/configs/qemu_sh4_r2d_defconfig
index 11c4d26..becce23 100644
--- a/configs/qemu_sh4_r2d_defconfig
+++ b/configs/qemu_sh4_r2d_defconfig
@@ -10,13 +10,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttySC1"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
# Linux kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-4.9.config"
BR2_LINUX_KERNEL_ZIMAGE=y
diff --git a/configs/qemu_sh4eb_r2d_defconfig b/configs/qemu_sh4eb_r2d_defconfig
index e88b638..61d9ac9 100644
--- a/configs/qemu_sh4eb_r2d_defconfig
+++ b/configs/qemu_sh4eb_r2d_defconfig
@@ -9,13 +9,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttySC1"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
# Linux kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4eb-r2d/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4eb-r2d/linux-4.9.config"
BR2_LINUX_KERNEL_ZIMAGE=y
diff --git a/configs/qemu_sparc64_sun4u_defconfig b/configs/qemu_sparc64_sun4u_defconfig
index a4c0e96..ef2d22f 100644
--- a/configs/qemu_sparc64_sun4u_defconfig
+++ b/configs/qemu_sparc64_sun4u_defconfig
@@ -9,12 +9,12 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
# Linux kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc64-sun4u/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc64-sun4u/linux-4.9.config"
diff --git a/configs/qemu_sparc_ss10_defconfig b/configs/qemu_sparc_ss10_defconfig
index 0f3b474..1d6c951 100644
--- a/configs/qemu_sparc_ss10_defconfig
+++ b/configs/qemu_sparc_ss10_defconfig
@@ -9,12 +9,12 @@ BR2_SYSTEM_DHCP="eth0"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
# Linux kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc-ss10/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc-ss10/linux-4.9.config"
diff --git a/configs/qemu_x86_64_defconfig b/configs/qemu_x86_64_defconfig
index 8284d3f..7002d5e 100644
--- a/configs/qemu_x86_64_defconfig
+++ b/configs/qemu_x86_64_defconfig
@@ -9,12 +9,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.9.config"
diff --git a/configs/qemu_x86_defconfig b/configs/qemu_x86_defconfig
index 0a4c6a8..99ca604 100644
--- a/configs/qemu_x86_defconfig
+++ b/configs/qemu_x86_defconfig
@@ -10,12 +10,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1"
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+# Linux headers same as kernel, a 4.9 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9.6"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-4.8.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-4.9.config"
diff --git a/configs/qemu_xtensa_lx60_defconfig b/configs/qemu_xtensa_lx60_defconfig
index 020ea0c..54d844d 100644
--- a/configs/qemu_xtensa_lx60_defconfig
+++ b/configs/qemu_xtensa_lx60_defconfig
@@ -16,13 +16,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_INITRAMFS=y
-# Linux headers same as kernel, a 4,8 series
+# Linux headers same as kernel, a 4.8 series
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.17"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.8.config"
BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
diff --git a/configs/qemu_xtensa_lx60_nommu_defconfig b/configs/qemu_xtensa_lx60_nommu_defconfig
index b2ff479..256cbee 100644
--- a/configs/qemu_xtensa_lx60_nommu_defconfig
+++ b/configs/qemu_xtensa_lx60_nommu_defconfig
@@ -26,7 +26,7 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.17"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.8-nommu.config"
BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
--
2.10.2
^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2017-06-07 20:51 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-10-13 13:02 [Buildroot] [PATCH] configs/qemu: bump to the latest kernel version Gustavo Zacarias
2016-10-13 19:45 ` Peter Korsgaard
2017-01-31 10:35 Gustavo Zacarias
2017-01-31 13:26 ` Peter Korsgaard
2017-06-05 19:52 Waldemar Brodkorb
2017-06-07 20:51 ` Peter Korsgaard
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.