* kvalo firmware confusion
[not found] <35593366.8510667.1448375044619.JavaMail.yahoo.ref@mail.yahoo.com>
@ 2015-11-24 14:24 ` Joerg Pommnitz
2015-11-24 15:50 ` Kalle Valo
0 siblings, 1 reply; 7+ messages in thread
From: Joerg Pommnitz @ 2015-11-24 14:24 UTC (permalink / raw)
To: ath10k
Hello all,
I'm confused about the git firmware situation for QCA988X.
I'm on linux 3.18.24. The driver want's to load firmware-2.bin.
The suggested download site according to https://github.com/kvalo/ath10k-firmware
is https://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/
The content of https://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/tree/ath10k/QCA988X/hw2.0 is:
-rw-r--r-- board.bin 2116
-rw-r--r-- firmware-4.bin 241892
-rw-r--r-- firmware-5.bin 245312
-rw-r--r-- notice_ath10k_firmware-4.txt 13890
-rw-r--r-- notice_ath10k_firmware-5.txt 15594
No firmware-2.bin. What's going on? The onliest firmware-2.bin currently available seems to be
https://github.com/kvalo/ath10k-firmware/blob/master/QCA988X/main/firmware-2.bin_999.999.0.636
Is this the one to use?
--
Regards Joerg
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: kvalo firmware confusion
2015-11-24 14:24 ` kvalo firmware confusion Joerg Pommnitz
@ 2015-11-24 15:50 ` Kalle Valo
2015-11-24 16:49 ` Joerg Pommnitz
2015-11-24 16:53 ` Joerg Pommnitz
0 siblings, 2 replies; 7+ messages in thread
From: Kalle Valo @ 2015-11-24 15:50 UTC (permalink / raw)
To: Joerg Pommnitz; +Cc: ath10k
Joerg Pommnitz <pommnitz@yahoo.com> writes:
> Hello all,
> I'm confused about the git firmware situation for QCA988X.
>
> I'm on linux 3.18.24. The driver want's to load firmware-2.bin.
With that old version of ath10k you should use 10.1 branch:
https://github.com/kvalo/ath10k-firmware/tree/master/QCA988X/10.1
But I really recommend using newer ath10k, for example by using
backports projects.
--
Kalle Valo
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: kvalo firmware confusion
2015-11-24 15:50 ` Kalle Valo
@ 2015-11-24 16:49 ` Joerg Pommnitz
2015-11-25 8:21 ` Kalle Valo
2015-11-24 16:53 ` Joerg Pommnitz
1 sibling, 1 reply; 7+ messages in thread
From: Joerg Pommnitz @ 2015-11-24 16:49 UTC (permalink / raw)
To: Kalle Valo; +Cc: ath10k
Thanks for the clarification.
Somebody should update
https://wireless.wiki.kernel.org/en/users/Drivers/ath10k/firmware
It states, that 10.2 is for 3.18.
-- Regards Joerg
> Kalle Valo <kvalo@qca.qualcomm.com> schrieb am 16:50 Dienstag, 24.November 2015:
> > Joerg Pommnitz <pommnitz@yahoo.com> writes:
>
>
>> Hello all,
>> I'm confused about the git firmware situation for QCA988X.
>>
>> I'm on linux 3.18.24. The driver want's to load firmware-2.bin.
>
> With that old version of ath10k you should use 10.1 branch:
>
> https://github.com/kvalo/ath10k-firmware/tree/master/QCA988X/10.1
>
> But I really recommend using newer ath10k, for example by using
> backports projects.
>
> --
> Kalle Valo
>
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: kvalo firmware confusion
2015-11-24 15:50 ` Kalle Valo
2015-11-24 16:49 ` Joerg Pommnitz
@ 2015-11-24 16:53 ` Joerg Pommnitz
1 sibling, 0 replies; 7+ messages in thread
From: Joerg Pommnitz @ 2015-11-24 16:53 UTC (permalink / raw)
To: Kalle Valo; +Cc: ath10k
And a little bit of nagging: the current driver is still broken for me.
See http://lists.infradead.org/pipermail/ath10k/2015-November/006494.html
-- Regards Joerg
> Kalle Valo <kvalo@qca.qualcomm.com> schrieb am 16:51 Dienstag, 24.November 2015:
> > Joerg Pommnitz <pommnitz@yahoo.com> writes:
>
>
>> Hello all,
>> I'm confused about the git firmware situation for QCA988X.
>>
>> I'm on linux 3.18.24. The driver want's to load firmware-2.bin.
>
> With that old version of ath10k you should use 10.1 branch:
>
> https://github.com/kvalo/ath10k-firmware/tree/master/QCA988X/10.1
>
> But I really recommend using newer ath10k, for example by using
> backports projects.
>
> --
> Kalle Valo
>
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: kvalo firmware confusion
2015-11-24 16:49 ` Joerg Pommnitz
@ 2015-11-25 8:21 ` Kalle Valo
2015-11-25 8:26 ` Joerg Pommnitz
0 siblings, 1 reply; 7+ messages in thread
From: Kalle Valo @ 2015-11-25 8:21 UTC (permalink / raw)
To: Joerg Pommnitz; +Cc: ath10k
Joerg Pommnitz <pommnitz@yahoo.com> writes:
> Thanks for the clarification.
> Somebody should update
>
>
>
> https://wireless.wiki.kernel.org/en/users/Drivers/ath10k/firmware
>
> It states, that 10.2 is for 3.18.
I just checked, 3.18 should try firmware-3.bin first and hence it should
support 10.2. So the wiki page is correct.
Is your version of ath10k trying to download firmware-3.bin first? If
yes, you should be able to use 10.2 firmware.
--
Kalle Valo
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: kvalo firmware confusion
2015-11-25 8:21 ` Kalle Valo
@ 2015-11-25 8:26 ` Joerg Pommnitz
2015-11-25 8:32 ` Kalle Valo
0 siblings, 1 reply; 7+ messages in thread
From: Joerg Pommnitz @ 2015-11-25 8:26 UTC (permalink / raw)
To: Kalle Valo; +Cc: ath10k
It complains about not being able to find firmware-3.bin. I'm not sure about the
order. I'll try again with firmware-3.bin in the firmware directory.
-- Regards Joerg
> Kalle Valo <kvalo@qca.qualcomm.com> schrieb am 9:21 Mittwoch, 25.November 2015:
> > Joerg Pommnitz <pommnitz@yahoo.com> writes:
>
>> Thanks for the clarification.
>> Somebody should update
>>
>>
>>
>> https://wireless.wiki.kernel.org/en/users/Drivers/ath10k/firmware
>>
>> It states, that 10.2 is for 3.18.
>
> I just checked, 3.18 should try firmware-3.bin first and hence it should
> support 10.2. So the wiki page is correct.
>
> Is your version of ath10k trying to download firmware-3.bin first? If
> yes, you should be able to use 10.2 firmware.
>
>
> --
> Kalle Valo
>
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: kvalo firmware confusion
2015-11-25 8:26 ` Joerg Pommnitz
@ 2015-11-25 8:32 ` Kalle Valo
0 siblings, 0 replies; 7+ messages in thread
From: Kalle Valo @ 2015-11-25 8:32 UTC (permalink / raw)
To: Joerg Pommnitz; +Cc: ath10k
Joerg Pommnitz <pommnitz@yahoo.com> writes:
> It complains about not being able to find firmware-3.bin. I'm not sure about the
> order. I'll try again with firmware-3.bin in the firmware directory.
It should try firmware-3.bin first and then try firmware-2.bin.
--
Kalle Valo
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2015-11-25 8:33 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <35593366.8510667.1448375044619.JavaMail.yahoo.ref@mail.yahoo.com>
2015-11-24 14:24 ` kvalo firmware confusion Joerg Pommnitz
2015-11-24 15:50 ` Kalle Valo
2015-11-24 16:49 ` Joerg Pommnitz
2015-11-25 8:21 ` Kalle Valo
2015-11-25 8:26 ` Joerg Pommnitz
2015-11-25 8:32 ` Kalle Valo
2015-11-24 16:53 ` Joerg Pommnitz
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.