[PATCH 0/3] ath10k: initial per-VDEV FW statistics implementation

[PATCH 0/3] ath10k: initial per-VDEV FW statistics implementation

[Bartosz Markowski]

FW 1.0.0.716 brings per-VDEV statistics. This patch-set implements
debugfs mechanism to fetch those. There's still few more fileds we
can read from the FW stats event, which are not covered here.

Please note there's an ABI change in wmi_peer_stats structure, hence
the PEER statistics will be corrupted if used with older firmware
(e.g. 1.0.0.636)

Bartosz Markowski (3):
  ath10k: update wmi_request_stats_cmd structure
  ath10k: update wal_dbg_tx_stats structure
  ath10k: implement per-VDEV FW statistics

 drivers/net/wireless/ath/ath10k/core.h  |   18 +++++++++
 drivers/net/wireless/ath/ath10k/debug.c |   42 ++++++++++++++++---
 drivers/net/wireless/ath/ath10k/wmi.h   |   67 ++++++++++++++++++++++++++-----
 3 files changed, 113 insertions(+), 14 deletions(-)

-- 
1.7.10

[PATCH 0/3] ath10k: initial per-VDEV FW statistics implementation

[Bartosz Markowski]

FW 1.0.0.716 brings per-VDEV statistics. This patch-set implements
debugfs mechanism to fetch those. There's still few more fileds we
can read from the FW stats event, which are not covered here.

Please note there's an ABI change in wmi_peer_stats structure, hence
the PEER statistics will be corrupted if used with older firmware
(e.g. 1.0.0.636)

Bartosz Markowski (3):
  ath10k: update wmi_request_stats_cmd structure
  ath10k: update wal_dbg_tx_stats structure
  ath10k: implement per-VDEV FW statistics

 drivers/net/wireless/ath/ath10k/core.h  |   18 +++++++++
 drivers/net/wireless/ath/ath10k/debug.c |   42 ++++++++++++++++---
 drivers/net/wireless/ath/ath10k/wmi.h   |   67 ++++++++++++++++++++++++++-----
 3 files changed, 113 insertions(+), 14 deletions(-)

-- 
1.7.10


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH 1/3] ath10k: update wmi_request_stats_cmd structure

[Bartosz Markowski]

With FW 1.0.0.716 the debufs fw_stats stopped working.
The request structure has grow to support VDEV stats aparently.

Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
---
 drivers/net/wireless/ath/ath10k/wmi.h |    9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 08860c4..1747631 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -1825,11 +1825,10 @@ enum wmi_stats_id {
 
 struct wmi_request_stats_cmd {
 	__le32 stats_id;
-
-	/*
-	 * Space to add parameters like
-	 * peer mac addr
-	 */
+	/* unique id identifying the VDEV, generated by the caller */
+	__le32 vdev_id;
+	/* peer MAC address */
+	struct wmi_mac_addr peer_macaddr;
 } __packed;
 
 /* Suspend option */
-- 
1.7.10

[PATCH 1/3] ath10k: update wmi_request_stats_cmd structure

[Bartosz Markowski]

With FW 1.0.0.716 the debufs fw_stats stopped working.
The request structure has grow to support VDEV stats aparently.

Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
---
 drivers/net/wireless/ath/ath10k/wmi.h |    9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 08860c4..1747631 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -1825,11 +1825,10 @@ enum wmi_stats_id {
 
 struct wmi_request_stats_cmd {
 	__le32 stats_id;
-
-	/*
-	 * Space to add parameters like
-	 * peer mac addr
-	 */
+	/* unique id identifying the VDEV, generated by the caller */
+	__le32 vdev_id;
+	/* peer MAC address */
+	struct wmi_mac_addr peer_macaddr;
 } __packed;
 
 /* Suspend option */
-- 
1.7.10


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH 2/3] ath10k: update wal_dbg_tx_stats structure

[Bartosz Markowski]

Add missing parameters. It's very imporatant to keep
these structs up to date with FW abi, due to the arithmetic we
use while read the fw_stats.

Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
---
 drivers/net/wireless/ath/ath10k/wmi.h |    3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 1747631..6366600 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -1767,6 +1767,9 @@ struct wal_dbg_tx_stats {
 	/* wal pdev resets  */
 	__le32 pdev_resets;
 
+	/* frames dropped due to non-availability of stateless TIDs */
+	__le32 stateless_tid_alloc_failure;
+
 	__le32 phy_underrun;
 
 	/* MPDU is more than txop limit */
-- 
1.7.10

[PATCH 2/3] ath10k: update wal_dbg_tx_stats structure

[Bartosz Markowski]

Add missing parameters. It's very imporatant to keep
these structs up to date with FW abi, due to the arithmetic we
use while read the fw_stats.

Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
---
 drivers/net/wireless/ath/ath10k/wmi.h |    3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 1747631..6366600 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -1767,6 +1767,9 @@ struct wal_dbg_tx_stats {
 	/* wal pdev resets  */
 	__le32 pdev_resets;
 
+	/* frames dropped due to non-availability of stateless TIDs */
+	__le32 stateless_tid_alloc_failure;
+
 	__le32 phy_underrun;
 
 	/* MPDU is more than txop limit */
-- 
1.7.10


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH 3/3] ath10k: implement per-VDEV FW statistics

[Bartosz Markowski]

The WMI_REQUEST_PEER_STAT command with latst (1.0.0.716) FW
can return per-VDEV statistics. Using debugfs we can fetch this info now.

This is NOT a backward compatible change, due to ABI changes in
wmi_peer_stats stats (new peer_rx_rate) field.

Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
---
 drivers/net/wireless/ath/ath10k/core.h  |   18 ++++++++++
 drivers/net/wireless/ath/ath10k/debug.c |   42 ++++++++++++++++++++---
 drivers/net/wireless/ath/ath10k/wmi.h   |   55 ++++++++++++++++++++++++++++---
 3 files changed, 106 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index ab05c4c..8e4e33e 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -119,6 +119,22 @@ struct ath10k_wmi {
 	struct work_struct wmi_event_work;
 };
 
+struct ath10k_vdev_stat {
+	u32 vdev_id;
+	struct wmi_snr_info vdev_snr;
+	u32 tx_frames_count[MAX_AC];
+	u32 rx_frames_count;
+	u32 multiple_retry_cnt[MAX_AC];
+	u32 fail_count[MAX_AC];
+	u32 rts_fail_count;
+	u32 rts_success_count;
+	u32 rts_err_count;
+	u32 rx_discard_count;
+	u32 ack_fail_count;
+	u32 tx_rate_history[MAX_TX_RATE_VALUES];
+	u32 bcn_rssi_history[MAX_RSSI_VALUES];
+};
+
 struct ath10k_peer_stat {
 	u8 peer_macaddr[ETH_ALEN];
 	u32 peer_rssi;
@@ -176,6 +192,8 @@ struct ath10k_target_stats {
 	s32 mpdu_errs;
 
 	/* VDEV STATS */
+	struct ath10k_vdev_stat vdev_stat[TARGET_NUM_VDEVS];
+	u8 vdevs;
 
 	/* PEER STATS */
 	u8 peers;
diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
index 3d65594..2bf1897 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -228,13 +228,24 @@ void ath10k_debug_read_target_stats(struct ath10k *ar,
 		tmp += sizeof(struct wmi_pdev_stats);
 	}
 
-	/* 0 or max vdevs */
-	/* Currently firmware does not support VDEV stats */
 	if (num_vdev_stats) {
 		struct wmi_vdev_stats *vdev_stats;
+		struct ath10k_vdev_stat *s;
+
+		stats->vdevs = num_vdev_stats;
 
 		for (i = 0; i < num_vdev_stats; i++) {
 			vdev_stats = (struct wmi_vdev_stats *)tmp;
+			s = &stats->vdev_stat[i];
+
+			s->vdev_id = __le32_to_cpu(vdev_stats->vdev_id);
+			s->vdev_snr.beacon_snr =
+				__le32_to_cpu(vdev_stats->vdev_snr.beacon_snr);
+			s->vdev_snr.data_snr =
+				__le32_to_cpu(vdev_stats->vdev_snr.data_snr);
+
+			/* TODO:read remaining vdev stats */
+
 			tmp += sizeof(struct wmi_vdev_stats);
 		}
 	}
@@ -270,7 +281,7 @@ static ssize_t ath10k_read_fw_stats(struct file *file, char __user *user_buf,
 	struct ath10k *ar = file->private_data;
 	struct ath10k_target_stats *fw_stats;
 	char *buf = NULL;
-	unsigned int len = 0, buf_len = 2500;
+	unsigned int len = 0, buf_len = 3000;
 	ssize_t ret_cnt = 0;
 	long left;
 	int i;
@@ -408,6 +419,27 @@ static ssize_t ath10k_read_fw_stats(struct file *file, char __user *user_buf,
 	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
 			 "MPDU errors (FCS, MIC, ENC)", fw_stats->mpdu_errs);
 
+	if (fw_stats->vdevs) {
+		len += scnprintf(buf + len, buf_len - len, "\n");
+		len += scnprintf(buf + len, buf_len - len, "%30s\n",
+				 "ath10k VDEV stats");
+		len += scnprintf(buf + len, buf_len - len, "%30s\n\n",
+				 "=================");
+	}
+
+	for (i = 0; i < fw_stats->vdevs; i++) {
+		len += scnprintf(buf + len, buf_len - len, "%30s %10u\n",
+				 "VDEV ID", fw_stats->vdev_stat[i].vdev_id);
+		len += scnprintf(buf + len, buf_len - len, "%30s %10u\n",
+				 "Beacon SNR",
+				 fw_stats->vdev_stat[i].vdev_snr.beacon_snr);
+		len += scnprintf(buf + len, buf_len - len, "%30s %10u\n",
+				 "Data SNR",
+				 fw_stats->vdev_stat[i].vdev_snr.data_snr);
+		len += scnprintf(buf + len, buf_len - len, "\n");
+	}
+
+
 	len += scnprintf(buf + len, buf_len - len, "\n");
 	len += scnprintf(buf + len, buf_len - len, "%30s\n",
 			 "ath10k PEER stats");
@@ -418,9 +450,9 @@ static ssize_t ath10k_read_fw_stats(struct file *file, char __user *user_buf,
 		len += scnprintf(buf + len, buf_len - len, "%30s %pM\n",
 				 "Peer MAC address",
 				 fw_stats->peer_stat[i].peer_macaddr);
-		len += scnprintf(buf + len, buf_len - len, "%30s %u\n",
+		len += scnprintf(buf + len, buf_len - len, "%30s %10u\n",
 				 "Peer RSSI", fw_stats->peer_stat[i].peer_rssi);
-		len += scnprintf(buf + len, buf_len - len, "%30s %u\n",
+		len += scnprintf(buf + len, buf_len - len, "%30s %10u\n",
 				 "Peer TX rate",
 				 fw_stats->peer_stat[i].peer_tx_rate);
 		len += scnprintf(buf + len, buf_len - len, "\n");
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 6366600..efed5d0 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -60,6 +60,11 @@
  *
  */
 
+#define MAX_AC 4 /* Maximum value of access category */
+
+#define MAX_TX_RATE_VALUES      10 /* Max Tx rates */
+#define MAX_RSSI_VALUES         10 /* Max RSSI values */
+
 /* Control Path */
 struct wmi_cmd_hdr {
 	__le32 cmd_id;
@@ -1893,12 +1898,53 @@ struct wmi_pdev_stats {
 	struct wal_dbg_stats wal; /* WAL dbg stats */
 } __packed;
 
-/*
- * VDEV statistics
- * TODO: add all VDEV stats here
- */
+struct wmi_snr_info {
+	__le32 beacon_snr;
+	__le32 data_snr;
+} __packed;
+
 struct wmi_vdev_stats {
+	/* unique id identifying the VDEV, generated by the caller */
 	__le32 vdev_id;
+	struct wmi_snr_info vdev_snr;
+	/*
+	 * Total number of packets(per AC) that were successfully transmitted
+	 * (with and without retries, including multi-cast, broadcast)
+	 */
+	__le32 tx_frm_cnt[MAX_AC];
+	/*
+	 * Total number of packets that were successfully received
+	 * (after appropriate filter rules including multi-cast, broadcast)
+	 */
+	__le32 rx_frm_cnt;
+	/*
+	 * The number of MSDU packets and MMPDU frames per AC that the 802.11
+	 * station successfully transmitted after more than one retransmission
+	 * attempt
+	 */
+	__le32 multiple_retry_cnt[MAX_AC];
+	/* Total number packets(per AC) failed to transmit */
+	__le32 fail_cnt[MAX_AC];
+	/* Total number of RTS/CTS sequence failures for transmission of a packet */
+	__le32 rts_fail_cnt;
+	/* Total number of RTS/CTS sequence success for transmission of a packet */
+	__le32 rts_succ_cnt;
+	/* The receive error count. HAL will provide the RxP FCS error global */
+	__le32 rx_err_cnt;
+	/*
+	 * The sum of the receive error count and dropped-receive-buffer
+	 * error count. (FCS error)
+	 */
+	__le32 rx_discard_cnt;
+	/*
+	 * Total number packets failed transmit because of no ACK
+	 * from the remote entity
+	 */
+	__le32 ack_fail_cnt;
+	/* History of last ten transmit rate, in units of 500 kbit/sec */
+	__le32 tx_rate_history[MAX_TX_RATE_VALUES];
+	/* History of last ten Beacon rssi of the connected Bss */
+	__le32 bcn_rssi_history[MAX_RSSI_VALUES];
 } __packed;
 
 /*
@@ -1909,6 +1955,7 @@ struct wmi_peer_stats {
 	struct wmi_mac_addr peer_macaddr;
 	__le32 peer_rssi;
 	__le32 peer_tx_rate;
+	__le32 peer_rx_rate;
 } __packed;
 
 struct wmi_vdev_create_cmd {
-- 
1.7.10

[PATCH 3/3] ath10k: implement per-VDEV FW statistics

[Bartosz Markowski]

The WMI_REQUEST_PEER_STAT command with latst (1.0.0.716) FW
can return per-VDEV statistics. Using debugfs we can fetch this info now.

This is NOT a backward compatible change, due to ABI changes in
wmi_peer_stats stats (new peer_rx_rate) field.

Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
---
 drivers/net/wireless/ath/ath10k/core.h  |   18 ++++++++++
 drivers/net/wireless/ath/ath10k/debug.c |   42 ++++++++++++++++++++---
 drivers/net/wireless/ath/ath10k/wmi.h   |   55 ++++++++++++++++++++++++++++---
 3 files changed, 106 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index ab05c4c..8e4e33e 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -119,6 +119,22 @@ struct ath10k_wmi {
 	struct work_struct wmi_event_work;
 };
 
+struct ath10k_vdev_stat {
+	u32 vdev_id;
+	struct wmi_snr_info vdev_snr;
+	u32 tx_frames_count[MAX_AC];
+	u32 rx_frames_count;
+	u32 multiple_retry_cnt[MAX_AC];
+	u32 fail_count[MAX_AC];
+	u32 rts_fail_count;
+	u32 rts_success_count;
+	u32 rts_err_count;
+	u32 rx_discard_count;
+	u32 ack_fail_count;
+	u32 tx_rate_history[MAX_TX_RATE_VALUES];
+	u32 bcn_rssi_history[MAX_RSSI_VALUES];
+};
+
 struct ath10k_peer_stat {
 	u8 peer_macaddr[ETH_ALEN];
 	u32 peer_rssi;
@@ -176,6 +192,8 @@ struct ath10k_target_stats {
 	s32 mpdu_errs;
 
 	/* VDEV STATS */
+	struct ath10k_vdev_stat vdev_stat[TARGET_NUM_VDEVS];
+	u8 vdevs;
 
 	/* PEER STATS */
 	u8 peers;
diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
index 3d65594..2bf1897 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -228,13 +228,24 @@ void ath10k_debug_read_target_stats(struct ath10k *ar,
 		tmp += sizeof(struct wmi_pdev_stats);
 	}
 
-	/* 0 or max vdevs */
-	/* Currently firmware does not support VDEV stats */
 	if (num_vdev_stats) {
 		struct wmi_vdev_stats *vdev_stats;
+		struct ath10k_vdev_stat *s;
+
+		stats->vdevs = num_vdev_stats;
 
 		for (i = 0; i < num_vdev_stats; i++) {
 			vdev_stats = (struct wmi_vdev_stats *)tmp;
+			s = &stats->vdev_stat[i];
+
+			s->vdev_id = __le32_to_cpu(vdev_stats->vdev_id);
+			s->vdev_snr.beacon_snr =
+				__le32_to_cpu(vdev_stats->vdev_snr.beacon_snr);
+			s->vdev_snr.data_snr =
+				__le32_to_cpu(vdev_stats->vdev_snr.data_snr);
+
+			/* TODO:read remaining vdev stats */
+
 			tmp += sizeof(struct wmi_vdev_stats);
 		}
 	}
@@ -270,7 +281,7 @@ static ssize_t ath10k_read_fw_stats(struct file *file, char __user *user_buf,
 	struct ath10k *ar = file->private_data;
 	struct ath10k_target_stats *fw_stats;
 	char *buf = NULL;
-	unsigned int len = 0, buf_len = 2500;
+	unsigned int len = 0, buf_len = 3000;
 	ssize_t ret_cnt = 0;
 	long left;
 	int i;
@@ -408,6 +419,27 @@ static ssize_t ath10k_read_fw_stats(struct file *file, char __user *user_buf,
 	len += scnprintf(buf + len, buf_len - len, "%30s %10d\n",
 			 "MPDU errors (FCS, MIC, ENC)", fw_stats->mpdu_errs);
 
+	if (fw_stats->vdevs) {
+		len += scnprintf(buf + len, buf_len - len, "\n");
+		len += scnprintf(buf + len, buf_len - len, "%30s\n",
+				 "ath10k VDEV stats");
+		len += scnprintf(buf + len, buf_len - len, "%30s\n\n",
+				 "=================");
+	}
+
+	for (i = 0; i < fw_stats->vdevs; i++) {
+		len += scnprintf(buf + len, buf_len - len, "%30s %10u\n",
+				 "VDEV ID", fw_stats->vdev_stat[i].vdev_id);
+		len += scnprintf(buf + len, buf_len - len, "%30s %10u\n",
+				 "Beacon SNR",
+				 fw_stats->vdev_stat[i].vdev_snr.beacon_snr);
+		len += scnprintf(buf + len, buf_len - len, "%30s %10u\n",
+				 "Data SNR",
+				 fw_stats->vdev_stat[i].vdev_snr.data_snr);
+		len += scnprintf(buf + len, buf_len - len, "\n");
+	}
+
+
 	len += scnprintf(buf + len, buf_len - len, "\n");
 	len += scnprintf(buf + len, buf_len - len, "%30s\n",
 			 "ath10k PEER stats");
@@ -418,9 +450,9 @@ static ssize_t ath10k_read_fw_stats(struct file *file, char __user *user_buf,
 		len += scnprintf(buf + len, buf_len - len, "%30s %pM\n",
 				 "Peer MAC address",
 				 fw_stats->peer_stat[i].peer_macaddr);
-		len += scnprintf(buf + len, buf_len - len, "%30s %u\n",
+		len += scnprintf(buf + len, buf_len - len, "%30s %10u\n",
 				 "Peer RSSI", fw_stats->peer_stat[i].peer_rssi);
-		len += scnprintf(buf + len, buf_len - len, "%30s %u\n",
+		len += scnprintf(buf + len, buf_len - len, "%30s %10u\n",
 				 "Peer TX rate",
 				 fw_stats->peer_stat[i].peer_tx_rate);
 		len += scnprintf(buf + len, buf_len - len, "\n");
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 6366600..efed5d0 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -60,6 +60,11 @@
  *
  */
 
+#define MAX_AC 4 /* Maximum value of access category */
+
+#define MAX_TX_RATE_VALUES      10 /* Max Tx rates */
+#define MAX_RSSI_VALUES         10 /* Max RSSI values */
+
 /* Control Path */
 struct wmi_cmd_hdr {
 	__le32 cmd_id;
@@ -1893,12 +1898,53 @@ struct wmi_pdev_stats {
 	struct wal_dbg_stats wal; /* WAL dbg stats */
 } __packed;
 
-/*
- * VDEV statistics
- * TODO: add all VDEV stats here
- */
+struct wmi_snr_info {
+	__le32 beacon_snr;
+	__le32 data_snr;
+} __packed;
+
 struct wmi_vdev_stats {
+	/* unique id identifying the VDEV, generated by the caller */
 	__le32 vdev_id;
+	struct wmi_snr_info vdev_snr;
+	/*
+	 * Total number of packets(per AC) that were successfully transmitted
+	 * (with and without retries, including multi-cast, broadcast)
+	 */
+	__le32 tx_frm_cnt[MAX_AC];
+	/*
+	 * Total number of packets that were successfully received
+	 * (after appropriate filter rules including multi-cast, broadcast)
+	 */
+	__le32 rx_frm_cnt;
+	/*
+	 * The number of MSDU packets and MMPDU frames per AC that the 802.11
+	 * station successfully transmitted after more than one retransmission
+	 * attempt
+	 */
+	__le32 multiple_retry_cnt[MAX_AC];
+	/* Total number packets(per AC) failed to transmit */
+	__le32 fail_cnt[MAX_AC];
+	/* Total number of RTS/CTS sequence failures for transmission of a packet */
+	__le32 rts_fail_cnt;
+	/* Total number of RTS/CTS sequence success for transmission of a packet */
+	__le32 rts_succ_cnt;
+	/* The receive error count. HAL will provide the RxP FCS error global */
+	__le32 rx_err_cnt;
+	/*
+	 * The sum of the receive error count and dropped-receive-buffer
+	 * error count. (FCS error)
+	 */
+	__le32 rx_discard_cnt;
+	/*
+	 * Total number packets failed transmit because of no ACK
+	 * from the remote entity
+	 */
+	__le32 ack_fail_cnt;
+	/* History of last ten transmit rate, in units of 500 kbit/sec */
+	__le32 tx_rate_history[MAX_TX_RATE_VALUES];
+	/* History of last ten Beacon rssi of the connected Bss */
+	__le32 bcn_rssi_history[MAX_RSSI_VALUES];
 } __packed;
 
 /*
@@ -1909,6 +1955,7 @@ struct wmi_peer_stats {
 	struct wmi_mac_addr peer_macaddr;
 	__le32 peer_rssi;
 	__le32 peer_tx_rate;
+	__le32 peer_rx_rate;
 } __packed;
 
 struct wmi_vdev_create_cmd {
-- 
1.7.10


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: [PATCH 0/3] ath10k: initial per-VDEV FW statistics implementation

[Kalle Valo]

Bartosz Markowski <bartosz.markowski@tieto.com> writes:

> FW 1.0.0.716 brings per-VDEV statistics. This patch-set implements
> debugfs mechanism to fetch those. There's still few more fileds we
> can read from the FW stats event, which are not covered here.
>
> Please note there's an ABI change in wmi_peer_stats structure, hence
> the PEER statistics will be corrupted if used with older firmware
> (e.g. 1.0.0.636)

We need to support the older firmware, so please add a feature flag VDEV
statistics so that we can detect which version of the struct needs to be
used.

Also I think you can fold patches 1 and 2.

-- 
Kalle Valo

Re: [PATCH 0/3] ath10k: initial per-VDEV FW statistics implementation

[Kalle Valo]

Bartosz Markowski <bartosz.markowski@tieto.com> writes:

> FW 1.0.0.716 brings per-VDEV statistics. This patch-set implements
> debugfs mechanism to fetch those. There's still few more fileds we
> can read from the FW stats event, which are not covered here.
>
> Please note there's an ABI change in wmi_peer_stats structure, hence
> the PEER statistics will be corrupted if used with older firmware
> (e.g. 1.0.0.636)

We need to support the older firmware, so please add a feature flag VDEV
statistics so that we can detect which version of the struct needs to be
used.

Also I think you can fold patches 1 and 2.

-- 
Kalle Valo

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: [PATCH 0/3] ath10k: initial per-VDEV FW statistics implementation

[Bartosz Markowski]

On 27 August 2013 08:56, Kalle Valo <kvalo@qca.qualcomm.com> wrote:
> Bartosz Markowski <bartosz.markowski@tieto.com> writes:
>
>> FW 1.0.0.716 brings per-VDEV statistics. This patch-set implements
>> debugfs mechanism to fetch those. There's still few more fileds we
>> can read from the FW stats event, which are not covered here.
>>
>> Please note there's an ABI change in wmi_peer_stats structure, hence
>> the PEER statistics will be corrupted if used with older firmware
>> (e.g. 1.0.0.636)
>
> We need to support the older firmware, so please add a feature flag VDEV
> statistics so that we can detect which version of the struct needs to be
> used.
>
> Also I think you can fold patches 1 and 2.

OK, will do. Please drop this patch-set and I will send a single one.

-- 
Bartosz

Re: [PATCH 0/3] ath10k: initial per-VDEV FW statistics implementation

[Bartosz Markowski]

On 27 August 2013 08:56, Kalle Valo <kvalo@qca.qualcomm.com> wrote:
> Bartosz Markowski <bartosz.markowski@tieto.com> writes:
>
>> FW 1.0.0.716 brings per-VDEV statistics. This patch-set implements
>> debugfs mechanism to fetch those. There's still few more fileds we
>> can read from the FW stats event, which are not covered here.
>>
>> Please note there's an ABI change in wmi_peer_stats structure, hence
>> the PEER statistics will be corrupted if used with older firmware
>> (e.g. 1.0.0.636)
>
> We need to support the older firmware, so please add a feature flag VDEV
> statistics so that we can detect which version of the struct needs to be
> used.
>
> Also I think you can fold patches 1 and 2.

OK, will do. Please drop this patch-set and I will send a single one.

-- 
Bartosz

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k