* [PATCH] dt: Document: Add optional dw_mmc pm bindings
@ 2012-11-07 11:07 ` Abhilash Kesavan
0 siblings, 0 replies; 6+ messages in thread
From: Abhilash Kesavan @ 2012-11-07 11:07 UTC (permalink / raw)
To: linux-arm-kernel, kgene.kim, cjb, linux-mmc, will.newton
Add documentation for pm capabilties such as MMC_PM_KEEP_POWER
and MMC_PM_WAKE_SDIO_IRQ.
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
---
.../devicetree/bindings/mmc/synposis-dw-mshc.txt | 7 +++++++
1 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt
index 06cd32d..fa6806d 100644
--- a/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt
@@ -47,6 +47,11 @@ Optional properties:
* broken-cd: as documented in mmc core bindings.
+* keep-power-in-suspend: Preserves card power during a suspend/resume cycle.
+
+* enable-sdio-wakeup: Enables wake up of host system on SDIO IRQ assertion.
+
+ Samsung Exynos5250 specific properties:
Aliases:
- All the MSHC controller nodes should be represented in the aliases node using
@@ -69,6 +74,8 @@ board specific portions as listed below.
num-slots = <1>;
supports-highspeed;
broken-cd;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
fifo-depth = <0x80>;
card-detect-delay = <200>;
--
1.6.6.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH] dt: Document: Add optional dw_mmc pm bindings
@ 2012-11-07 11:07 ` Abhilash Kesavan
0 siblings, 0 replies; 6+ messages in thread
From: Abhilash Kesavan @ 2012-11-07 11:07 UTC (permalink / raw)
To: linux-arm-kernel
Add documentation for pm capabilties such as MMC_PM_KEEP_POWER
and MMC_PM_WAKE_SDIO_IRQ.
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
---
.../devicetree/bindings/mmc/synposis-dw-mshc.txt | 7 +++++++
1 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt
index 06cd32d..fa6806d 100644
--- a/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt
@@ -47,6 +47,11 @@ Optional properties:
* broken-cd: as documented in mmc core bindings.
+* keep-power-in-suspend: Preserves card power during a suspend/resume cycle.
+
+* enable-sdio-wakeup: Enables wake up of host system on SDIO IRQ assertion.
+
+ Samsung Exynos5250 specific properties:
Aliases:
- All the MSHC controller nodes should be represented in the aliases node using
@@ -69,6 +74,8 @@ board specific portions as listed below.
num-slots = <1>;
supports-highspeed;
broken-cd;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
fifo-depth = <0x80>;
card-detect-delay = <200>;
--
1.6.6.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH] mmc: dw_mmc: Add sdio power bindings
2012-11-07 11:07 ` Abhilash Kesavan
@ 2012-11-07 11:07 ` Abhilash Kesavan
-1 siblings, 0 replies; 6+ messages in thread
From: Abhilash Kesavan @ 2012-11-07 11:07 UTC (permalink / raw)
To: linux-arm-kernel, kgene.kim, cjb, linux-mmc, will.newton
Add dt-based retrieval of host sdio pm capabilities. Based on
the dt based discovery do a bus init in the resume function.
Signed-off-by: Olof Johansson <olofj@chromium.org>
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
---
drivers/mmc/host/dw_mmc.c | 20 +++++++++++++++++---
include/linux/mmc/dw_mmc.h | 1 +
2 files changed, 18 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index c0667c8..5979203 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -617,13 +617,13 @@ static void mci_send_cmd(struct dw_mci_slot *slot, u32 cmd, u32 arg)
cmd, arg, cmd_status);
}
-static void dw_mci_setup_bus(struct dw_mci_slot *slot)
+static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit)
{
struct dw_mci *host = slot->host;
u32 div;
u32 clk_en_a;
- if (slot->clock != host->current_speed) {
+ if (slot->clock != host->current_speed || force_clkinit) {
div = host->bus_hz / slot->clock;
if (host->bus_hz % slot->clock && host->bus_hz > slot->clock)
/*
@@ -684,7 +684,7 @@ static void __dw_mci_start_request(struct dw_mci *host,
host->pdata->select_slot(slot->id);
/* Slot specific timing and width adjustment */
- dw_mci_setup_bus(slot);
+ dw_mci_setup_bus(slot, false);
host->cur_slot = slot;
host->mrq = mrq;
@@ -1850,6 +1850,9 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
if (host->pdata->caps)
mmc->caps = host->pdata->caps;
+ if (host->pdata->pm_caps)
+ mmc->pm_caps = host->pdata->pm_caps;
+
if (host->dev->of_node) {
ctrl_id = of_alias_get_id(host->dev->of_node, "mshc");
if (ctrl_id < 0)
@@ -2072,6 +2075,12 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
return ERR_PTR(ret);
}
+ if (of_find_property(np, "keep-power-in-suspend", NULL))
+ pdata->pm_caps |= MMC_PM_KEEP_POWER;
+
+ if (of_find_property(np, "enable-sdio-wakeup", NULL))
+ pdata->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
+
return pdata;
}
@@ -2411,6 +2420,11 @@ int dw_mci_resume(struct dw_mci *host)
struct dw_mci_slot *slot = host->slot[i];
if (!slot)
continue;
+ if (slot->mmc->pm_flags & MMC_PM_KEEP_POWER) {
+ dw_mci_set_ios(slot->mmc, &slot->mmc->ios);
+ dw_mci_setup_bus(slot, true);
+ }
+
ret = mmc_resume_host(host->slot[i]->mmc);
if (ret < 0)
return ret;
diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
index 9653166..b27471d 100644
--- a/include/linux/mmc/dw_mmc.h
+++ b/include/linux/mmc/dw_mmc.h
@@ -231,6 +231,7 @@ struct dw_mci_board {
unsigned int caps; /* Capabilities */
unsigned int caps2; /* More capabilities */
+ unsigned int pm_caps; /* PM capabilities */
/*
* Override fifo depth. If 0, autodetect it from the FIFOTH register,
* but note that this may not be reliable after a bootloader has used
--
1.6.6.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH] mmc: dw_mmc: Add sdio power bindings
@ 2012-11-07 11:07 ` Abhilash Kesavan
0 siblings, 0 replies; 6+ messages in thread
From: Abhilash Kesavan @ 2012-11-07 11:07 UTC (permalink / raw)
To: linux-arm-kernel
Add dt-based retrieval of host sdio pm capabilities. Based on
the dt based discovery do a bus init in the resume function.
Signed-off-by: Olof Johansson <olofj@chromium.org>
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
---
drivers/mmc/host/dw_mmc.c | 20 +++++++++++++++++---
include/linux/mmc/dw_mmc.h | 1 +
2 files changed, 18 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index c0667c8..5979203 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -617,13 +617,13 @@ static void mci_send_cmd(struct dw_mci_slot *slot, u32 cmd, u32 arg)
cmd, arg, cmd_status);
}
-static void dw_mci_setup_bus(struct dw_mci_slot *slot)
+static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit)
{
struct dw_mci *host = slot->host;
u32 div;
u32 clk_en_a;
- if (slot->clock != host->current_speed) {
+ if (slot->clock != host->current_speed || force_clkinit) {
div = host->bus_hz / slot->clock;
if (host->bus_hz % slot->clock && host->bus_hz > slot->clock)
/*
@@ -684,7 +684,7 @@ static void __dw_mci_start_request(struct dw_mci *host,
host->pdata->select_slot(slot->id);
/* Slot specific timing and width adjustment */
- dw_mci_setup_bus(slot);
+ dw_mci_setup_bus(slot, false);
host->cur_slot = slot;
host->mrq = mrq;
@@ -1850,6 +1850,9 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
if (host->pdata->caps)
mmc->caps = host->pdata->caps;
+ if (host->pdata->pm_caps)
+ mmc->pm_caps = host->pdata->pm_caps;
+
if (host->dev->of_node) {
ctrl_id = of_alias_get_id(host->dev->of_node, "mshc");
if (ctrl_id < 0)
@@ -2072,6 +2075,12 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
return ERR_PTR(ret);
}
+ if (of_find_property(np, "keep-power-in-suspend", NULL))
+ pdata->pm_caps |= MMC_PM_KEEP_POWER;
+
+ if (of_find_property(np, "enable-sdio-wakeup", NULL))
+ pdata->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
+
return pdata;
}
@@ -2411,6 +2420,11 @@ int dw_mci_resume(struct dw_mci *host)
struct dw_mci_slot *slot = host->slot[i];
if (!slot)
continue;
+ if (slot->mmc->pm_flags & MMC_PM_KEEP_POWER) {
+ dw_mci_set_ios(slot->mmc, &slot->mmc->ios);
+ dw_mci_setup_bus(slot, true);
+ }
+
ret = mmc_resume_host(host->slot[i]->mmc);
if (ret < 0)
return ret;
diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
index 9653166..b27471d 100644
--- a/include/linux/mmc/dw_mmc.h
+++ b/include/linux/mmc/dw_mmc.h
@@ -231,6 +231,7 @@ struct dw_mci_board {
unsigned int caps; /* Capabilities */
unsigned int caps2; /* More capabilities */
+ unsigned int pm_caps; /* PM capabilities */
/*
* Override fifo depth. If 0, autodetect it from the FIFOTH register,
* but note that this may not be reliable after a bootloader has used
--
1.6.6.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] dt: Document: Add optional dw_mmc pm bindings
2012-11-07 11:07 ` Abhilash Kesavan
@ 2012-11-17 21:05 ` Chris Ball
-1 siblings, 0 replies; 6+ messages in thread
From: Chris Ball @ 2012-11-17 21:05 UTC (permalink / raw)
To: Abhilash Kesavan; +Cc: linux-arm-kernel, kgene.kim, linux-mmc, will.newton
Hi Abhilash,
On Wed, Nov 07 2012, Abhilash Kesavan wrote:
> Add documentation for pm capabilties such as MMC_PM_KEEP_POWER
> and MMC_PM_WAKE_SDIO_IRQ.
>
> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
> ---
> .../devicetree/bindings/mmc/synposis-dw-mshc.txt | 7 +++++++
(Ugh, I just noticed the typo in that filename. We should fix that.)
> 1 files changed, 7 insertions(+), 0 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt
> index 06cd32d..fa6806d 100644
> --- a/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt
> +++ b/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt
> @@ -47,6 +47,11 @@ Optional properties:
>
> * broken-cd: as documented in mmc core bindings.
>
> +* keep-power-in-suspend: Preserves card power during a suspend/resume cycle.
> +
> +* enable-sdio-wakeup: Enables wake up of host system on SDIO IRQ assertion.
> +
> + Samsung Exynos5250 specific properties:
> Aliases:
>
> - All the MSHC controller nodes should be represented in the aliases node using
> @@ -69,6 +74,8 @@ board specific portions as listed below.
> num-slots = <1>;
> supports-highspeed;
> broken-cd;
> + keep-power-in-suspend;
> + enable-sdio-wakeup;
> fifo-depth = <0x80>;
> card-detect-delay = <200>;
Let's make these core optional properties, documented in
Documentation/devicetree/bindings/mmc/mmc.txt instead of in
synposis-dw-mshc.txt, and also add support for them in sdhci_pltfm.c
by adding your "host->pm_caps |= .." lines to sdhci_get_of_property().
Please could you do that and resend? The dw_mmc patch looks fine.
Thanks,
- Chris.
--
Chris Ball <cjb@laptop.org> <http://printf.net/>
One Laptop Per Child
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] dt: Document: Add optional dw_mmc pm bindings
@ 2012-11-17 21:05 ` Chris Ball
0 siblings, 0 replies; 6+ messages in thread
From: Chris Ball @ 2012-11-17 21:05 UTC (permalink / raw)
To: linux-arm-kernel
Hi Abhilash,
On Wed, Nov 07 2012, Abhilash Kesavan wrote:
> Add documentation for pm capabilties such as MMC_PM_KEEP_POWER
> and MMC_PM_WAKE_SDIO_IRQ.
>
> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
> ---
> .../devicetree/bindings/mmc/synposis-dw-mshc.txt | 7 +++++++
(Ugh, I just noticed the typo in that filename. We should fix that.)
> 1 files changed, 7 insertions(+), 0 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt
> index 06cd32d..fa6806d 100644
> --- a/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt
> +++ b/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt
> @@ -47,6 +47,11 @@ Optional properties:
>
> * broken-cd: as documented in mmc core bindings.
>
> +* keep-power-in-suspend: Preserves card power during a suspend/resume cycle.
> +
> +* enable-sdio-wakeup: Enables wake up of host system on SDIO IRQ assertion.
> +
> + Samsung Exynos5250 specific properties:
> Aliases:
>
> - All the MSHC controller nodes should be represented in the aliases node using
> @@ -69,6 +74,8 @@ board specific portions as listed below.
> num-slots = <1>;
> supports-highspeed;
> broken-cd;
> + keep-power-in-suspend;
> + enable-sdio-wakeup;
> fifo-depth = <0x80>;
> card-detect-delay = <200>;
Let's make these core optional properties, documented in
Documentation/devicetree/bindings/mmc/mmc.txt instead of in
synposis-dw-mshc.txt, and also add support for them in sdhci_pltfm.c
by adding your "host->pm_caps |= .." lines to sdhci_get_of_property().
Please could you do that and resend? The dw_mmc patch looks fine.
Thanks,
- Chris.
--
Chris Ball <cjb@laptop.org> <http://printf.net/>
One Laptop Per Child
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2012-11-17 21:05 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-11-07 11:07 [PATCH] dt: Document: Add optional dw_mmc pm bindings Abhilash Kesavan
2012-11-07 11:07 ` Abhilash Kesavan
2012-11-07 11:07 ` [PATCH] mmc: dw_mmc: Add sdio power bindings Abhilash Kesavan
2012-11-07 11:07 ` Abhilash Kesavan
2012-11-17 21:05 ` [PATCH] dt: Document: Add optional dw_mmc pm bindings Chris Ball
2012-11-17 21:05 ` Chris Ball
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.