* ath10k-firmware: QCA6174 hw3.0: Add additional board-bin file
@ 2020-10-25 11:35 Tim Klicks
2022-01-21 15:05 ` Kalle Valo
0 siblings, 1 reply; 2+ messages in thread
From: Tim Klicks @ 2020-10-25 11:35 UTC (permalink / raw)
To: ath10k
[-- Attachment #1: Type: text/plain, Size: 1680 bytes --]
Hi,
Unfortunately I am new to submitting bin files - please excuse if
anything is not matching or missing and correct me if anything is missing.
Following
https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles here
is what I think is needed.
* description for what hardware this is:
According to 'lspci -vvv'
- Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 32)
- Subsystem: Lite-On Communications Inc Device 0847
* origin of the board file (did you create it yourself or where you
downloaded)
The board.bin file which is needed to make my WiFi adapter work can be
found here:
- https://github.com/kvalo/ath10k-firmware/pull/3
Quote:
"this is the renamed eeprom_ar6320_3p0_NFA364xp.bin which was was
needed to get my killer 1535 working."
-->
https://github.com/kvalo/ath10k-firmware/raw/7e56cbb94182a2fdab110cf5bfeded8fd1d44d30/QCA6174/hw3.0/board-2.bin
- Reading the pull request, it was most likely taken from stock firmware
image
* ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
I personally do not know what is meant/needed here, but I suspect that
this is meant:
- QCA6174 hw3.0
+
bus=pci,vendor=168c,device=003e,subsystem-vendor=11ad,subsystem-device=0847
Coming from this journalctl message:
- ath10k_pci 0000:01:00.0: failed to fetch board data for
bus=pci,vendor=168c,device=003e,subsystem-vendor=11ad,subsystem-device=0847
from ath10k/QCA6174/hw3.0/board-2.bin)
* attach the actual board file (board.bin)
- qca6174-168c-003e.bin
- md5sum: df5ba1ca92f98bbd9cb537ddc5747011 qca6174-168c-003e.bin
Hope everything is correct. If not, please contact me.
Best regards,
Tim
[-- Attachment #2: qca6174-168c-003e.bin --]
[-- Type: application/octet-stream, Size: 8124 bytes --]
[-- Attachment #3: Type: text/plain, Size: 146 bytes --]
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: ath10k-firmware: QCA6174 hw3.0: Add additional board-bin file
2020-10-25 11:35 ath10k-firmware: QCA6174 hw3.0: Add additional board-bin file Tim Klicks
@ 2022-01-21 15:05 ` Kalle Valo
0 siblings, 0 replies; 2+ messages in thread
From: Kalle Valo @ 2022-01-21 15:05 UTC (permalink / raw)
To: Tim Klicks; +Cc: ath10k
Tim Klicks <tim.klicks@gmail.com> writes:
> Unfortunately I am new to submitting bin files - please excuse if
> anything is not matching or missing and correct me if anything is
> missing.
>
> Following
> https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles
> here is what I think is needed.
>
> * description for what hardware this is:
> According to 'lspci -vvv'
> - Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 32)
> - Subsystem: Lite-On Communications Inc Device 0847
>
> * origin of the board file (did you create it yourself or where you
> downloaded)
> The board.bin file which is needed to make my WiFi adapter work can be
> found here:
> - https://github.com/kvalo/ath10k-firmware/pull/3
> Quote:
> "this is the renamed eeprom_ar6320_3p0_NFA364xp.bin which was was
> needed to get my killer 1535 working."
> -->
> https://github.com/kvalo/ath10k-firmware/raw/7e56cbb94182a2fdab110cf5bfeded8fd1d44d30/QCA6174/hw3.0/board-2.bin
>
> - Reading the pull request, it was most likely taken from stock
> firmware image
>
> * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
> I personally do not know what is meant/needed here, but I suspect that
> this is meant:
> - QCA6174 hw3.0
> +
> bus=pci,vendor=168c,device=003e,subsystem-vendor=11ad,subsystem-device=0847
> Coming from this journalctl message:
> - ath10k_pci 0000:01:00.0: failed to fetch board data for
> bus=pci,vendor=168c,device=003e,subsystem-vendor=11ad,subsystem-device=0847
> from ath10k/QCA6174/hw3.0/board-2.bin)
>
> * attach the actual board file (board.bin)
> - qca6174-168c-003e.bin
> - md5sum: df5ba1ca92f98bbd9cb537ddc5747011 qca6174-168c-003e.bin
>
> Hope everything is correct. If not, please contact me.
Thanks, I manually added it now but please do double check that I didn't
make any errors:
New:
bus=pci,vendor=168c,device=003e,subsystem-vendor=11ad,subsystem-device=0847
Changed:
Deleted:
1 board image(s) added, 0 changed, 0 deleted, 88 in total
https://github.com/kvalo/ath10k-firmware/commit/556321a9c9c54c1e116dc24c755f6e1a5dc16e2c
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2022-01-21 15:05 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-25 11:35 ath10k-firmware: QCA6174 hw3.0: Add additional board-bin file Tim Klicks
2022-01-21 15:05 ` Kalle Valo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.