* [U-Boot] [PATCH] rpi: add Compute Module 3+
@ 2019-01-30 14:17 Jonathan Gray
2019-01-30 15:13 ` Alexander Graf
0 siblings, 1 reply; 5+ messages in thread
From: Jonathan Gray @ 2019-01-30 14:17 UTC (permalink / raw)
To: u-boot
Add Raspberry Pi Compute Module 3+ to list of models, the revision code
is 0x10 according to the list on raspberrypi.org.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
---
board/raspberrypi/rpi/rpi.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
index 153a1fdcb7..c118250740 100644
--- a/board/raspberrypi/rpi/rpi.c
+++ b/board/raspberrypi/rpi/rpi.c
@@ -143,6 +143,11 @@ static const struct rpi_model rpi_models_new_scheme[] = {
DTB_DIR "bcm2837-rpi-3-a-plus.dtb",
false,
},
+ [0x10] = {
+ "Compute Module 3+",
+ DTB_DIR "bcm2837-rpi-cm3-plus.dtb",
+ false,
+ },
};
static const struct rpi_model rpi_models_old_scheme[] = {
--
2.20.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* [U-Boot] [PATCH] rpi: add Compute Module 3+
2019-01-30 14:17 [U-Boot] [PATCH] rpi: add Compute Module 3+ Jonathan Gray
@ 2019-01-30 15:13 ` Alexander Graf
2019-01-30 21:38 ` Jonathan Gray
0 siblings, 1 reply; 5+ messages in thread
From: Alexander Graf @ 2019-01-30 15:13 UTC (permalink / raw)
To: u-boot
Hi Jonathan,
On 30.01.19 15:17, Jonathan Gray wrote:
> Add Raspberry Pi Compute Module 3+ to list of models, the revision code
> is 0x10 according to the list on raspberrypi.org.
>
> Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
> ---
> board/raspberrypi/rpi/rpi.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
> index 153a1fdcb7..c118250740 100644
> --- a/board/raspberrypi/rpi/rpi.c
> +++ b/board/raspberrypi/rpi/rpi.c
> @@ -143,6 +143,11 @@ static const struct rpi_model rpi_models_new_scheme[] = {
> DTB_DIR "bcm2837-rpi-3-a-plus.dtb",
> false,
> },
> + [0x10] = {
> + "Compute Module 3+",
> + DTB_DIR "bcm2837-rpi-cm3-plus.dtb",
Is the dtb name already committed to? I haven't seen patches on the rpi
kernel ML.
Alex
> + false,
> + },
> };
>
> static const struct rpi_model rpi_models_old_scheme[] = {
>
^ permalink raw reply [flat|nested] 5+ messages in thread* [U-Boot] [PATCH] rpi: add Compute Module 3+
2019-01-30 15:13 ` Alexander Graf
@ 2019-01-30 21:38 ` Jonathan Gray
2019-01-30 21:56 ` Alexander Graf
0 siblings, 1 reply; 5+ messages in thread
From: Jonathan Gray @ 2019-01-30 21:38 UTC (permalink / raw)
To: u-boot
On Wed, Jan 30, 2019 at 04:13:44PM +0100, Alexander Graf wrote:
> Hi Jonathan,
>
> On 30.01.19 15:17, Jonathan Gray wrote:
> > Add Raspberry Pi Compute Module 3+ to list of models, the revision code
> > is 0x10 according to the list on raspberrypi.org.
> >
> > Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
> > ---
> > board/raspberrypi/rpi/rpi.c | 5 +++++
> > 1 file changed, 5 insertions(+)
> >
> > diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
> > index 153a1fdcb7..c118250740 100644
> > --- a/board/raspberrypi/rpi/rpi.c
> > +++ b/board/raspberrypi/rpi/rpi.c
> > @@ -143,6 +143,11 @@ static const struct rpi_model rpi_models_new_scheme[] = {
> > DTB_DIR "bcm2837-rpi-3-a-plus.dtb",
> > false,
> > },
> > + [0x10] = {
> > + "Compute Module 3+",
> > + DTB_DIR "bcm2837-rpi-cm3-plus.dtb",
>
> Is the dtb name already committed to? I haven't seen patches on the rpi
> kernel ML.
I didn't see an existing name in various linux trees.
There is currently no new dtb provided with the firmware either, though
https://raw.githubusercontent.com/raspberrypi/documentation/master/hardware/computemodule/datasheets/rpi_DATA_CM3plus_1p0.pdf
states
"CM3+ modules require a software/firmware image dated November 2018 or
newer to function correctly."
So the firmware likely patches bcm2710-rpi-cm3.dtb before passing it on.
^ permalink raw reply [flat|nested] 5+ messages in thread* [U-Boot] [PATCH] rpi: add Compute Module 3+
2019-01-30 21:38 ` Jonathan Gray
@ 2019-01-30 21:56 ` Alexander Graf
2019-01-30 22:13 ` Jonathan Gray
0 siblings, 1 reply; 5+ messages in thread
From: Alexander Graf @ 2019-01-30 21:56 UTC (permalink / raw)
To: u-boot
> Am 30.01.2019 um 22:38 schrieb Jonathan Gray <jsg@jsg.id.au>:
>
>> On Wed, Jan 30, 2019 at 04:13:44PM +0100, Alexander Graf wrote:
>> Hi Jonathan,
>>
>>> On 30.01.19 15:17, Jonathan Gray wrote:
>>> Add Raspberry Pi Compute Module 3+ to list of models, the revision code
>>> is 0x10 according to the list on raspberrypi.org.
>>>
>>> Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
>>> ---
>>> board/raspberrypi/rpi/rpi.c | 5 +++++
>>> 1 file changed, 5 insertions(+)
>>>
>>> diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
>>> index 153a1fdcb7..c118250740 100644
>>> --- a/board/raspberrypi/rpi/rpi.c
>>> +++ b/board/raspberrypi/rpi/rpi.c
>>> @@ -143,6 +143,11 @@ static const struct rpi_model rpi_models_new_scheme[] = {
>>> DTB_DIR "bcm2837-rpi-3-a-plus.dtb",
>>> false,
>>> },
>>> + [0x10] = {
>>> + "Compute Module 3+",
>>> + DTB_DIR "bcm2837-rpi-cm3-plus.dtb",
>>
>> Is the dtb name already committed to? I haven't seen patches on the rpi
>> kernel ML.
>
> I didn't see an existing name in various linux trees.
>
> There is currently no new dtb provided with the firmware either, though
> https://raw.githubusercontent.com/raspberrypi/documentation/master/hardware/computemodule/datasheets/rpi_DATA_CM3plus_1p0.pdf
> states
>
> "CM3+ modules require a software/firmware image dated November 2018 or
> newer to function correctly."
>
> So the firmware likely patches bcm2710-rpi-cm3.dtb before passing it on.
Or maybe it's identical to the CM3? It's supposed to be a drop in replacement after all - and the other differences (wifi chip, usb hub) of the 3+ should not apply to a CM.
So I guess either you send a patch to Linux that adds the cm3plus and only changes the compatible/model properties over cm3 or we make the dtb name in this patch the cm3 one.
Alex
^ permalink raw reply [flat|nested] 5+ messages in thread* [U-Boot] [PATCH] rpi: add Compute Module 3+
2019-01-30 21:56 ` Alexander Graf
@ 2019-01-30 22:13 ` Jonathan Gray
0 siblings, 0 replies; 5+ messages in thread
From: Jonathan Gray @ 2019-01-30 22:13 UTC (permalink / raw)
To: u-boot
On Wed, Jan 30, 2019 at 10:56:37PM +0100, Alexander Graf wrote:
>
>
> > Am 30.01.2019 um 22:38 schrieb Jonathan Gray <jsg@jsg.id.au>:
> >
> >> On Wed, Jan 30, 2019 at 04:13:44PM +0100, Alexander Graf wrote:
> >> Hi Jonathan,
> >>
> >>> On 30.01.19 15:17, Jonathan Gray wrote:
> >>> Add Raspberry Pi Compute Module 3+ to list of models, the revision code
> >>> is 0x10 according to the list on raspberrypi.org.
> >>>
> >>> Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
> >>> ---
> >>> board/raspberrypi/rpi/rpi.c | 5 +++++
> >>> 1 file changed, 5 insertions(+)
> >>>
> >>> diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
> >>> index 153a1fdcb7..c118250740 100644
> >>> --- a/board/raspberrypi/rpi/rpi.c
> >>> +++ b/board/raspberrypi/rpi/rpi.c
> >>> @@ -143,6 +143,11 @@ static const struct rpi_model rpi_models_new_scheme[] = {
> >>> DTB_DIR "bcm2837-rpi-3-a-plus.dtb",
> >>> false,
> >>> },
> >>> + [0x10] = {
> >>> + "Compute Module 3+",
> >>> + DTB_DIR "bcm2837-rpi-cm3-plus.dtb",
> >>
> >> Is the dtb name already committed to? I haven't seen patches on the rpi
> >> kernel ML.
> >
> > I didn't see an existing name in various linux trees.
> >
> > There is currently no new dtb provided with the firmware either, though
> > https://raw.githubusercontent.com/raspberrypi/documentation/master/hardware/computemodule/datasheets/rpi_DATA_CM3plus_1p0.pdf
> > states
> >
> > "CM3+ modules require a software/firmware image dated November 2018 or
> > newer to function correctly."
> >
> > So the firmware likely patches bcm2710-rpi-cm3.dtb before passing it on.
>
> Or maybe it's identical to the CM3? It's supposed to be a drop in replacement after all - and the other differences (wifi chip, usb hub) of the 3+ should not apply to a CM.
>
> So I guess either you send a patch to Linux that adds the cm3plus and only changes the compatible/model properties over cm3 or we make the dtb name in this patch the cm3 one.
>
> Alex
Ok, I'll send a v2 with "bcm2837-rpi-cm3.dtb".
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2019-01-30 22:13 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-30 14:17 [U-Boot] [PATCH] rpi: add Compute Module 3+ Jonathan Gray
2019-01-30 15:13 ` Alexander Graf
2019-01-30 21:38 ` Jonathan Gray
2019-01-30 21:56 ` Alexander Graf
2019-01-30 22:13 ` Jonathan Gray
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.