All of lore.kernel.org
 help / color / mirror / Atom feed
From: Patrice CHOTARD <patrice.chotard@foss.st.com>
To: <u-boot@lists.denx.de>
Cc: Patrick DELAUNAY <patrick.delaunay@foss.st.com>,
	U-Boot STM32 <uboot-stm32@st-md-mailman.stormreply.com>,
	Heiko Schocher <hs@denx.de>
Subject: Re: [PATCH v1 1/7] i2c: stm32f7: move driver data of each instance in a privdata
Date: Fri, 8 Oct 2021 08:43:17 +0200	[thread overview]
Message-ID: <8818633f-3a68-5d14-c6c3-bbd6643f2eb7@foss.st.com> (raw)
In-Reply-To: <20210803100515.29383-2-patrice.chotard@foss.st.com>

Hi Patrick

On 8/3/21 12:05 PM, Patrice Chotard wrote:
> From: Patrick Delaunay <patrick.delaunay@foss.st.com>
> 
> Today all the I2C instance point on the same global
> variable stm32_i2c_setup according the compatible: i2c_priv->setup =
> pointer to the same driver data.
> 
> This patch changes this driver data (stm32f7_setup and stm32mp15_setup)
> to a const struct and move the timing struct 'setup' as element of i2c
> privdata, initialized in stm32_ofdata_to_platdata() with the driver
> configuration data.
> 
> This patch solves issues when several I2C instance have not the same
> clock source or not the same configuration: each timing setup is saved
> is the I2C privdata.
> 
> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
> ---
> 
>  drivers/i2c/stm32f7_i2c.c | 53 ++++++++++++++++++++-------------------
>  1 file changed, 27 insertions(+), 26 deletions(-)
> 
> diff --git a/drivers/i2c/stm32f7_i2c.c b/drivers/i2c/stm32f7_i2c.c
> index 7b04a09de0..b449084b5f 100644
> --- a/drivers/i2c/stm32f7_i2c.c
> +++ b/drivers/i2c/stm32f7_i2c.c
> @@ -158,7 +158,6 @@ struct stm32_i2c_spec {
>   * @fall_time: Fall time (ns)
>   * @dnf: Digital filter coefficient (0-16)
>   * @analog_filter: Analog filter delay (On/Off)
> - * @fmp_clr_offset: Fast Mode Plus clear register offset from set register
>   */
>  struct stm32_i2c_setup {
>  	u32 speed_freq;
> @@ -167,6 +166,13 @@ struct stm32_i2c_setup {
>  	u32 fall_time;
>  	u8 dnf;
>  	bool analog_filter;
> +};
> +
> +/**
> + * struct stm32_i2c_data - driver data for I2C configuration by compatible
> + * @fmp_clr_offset: Fast Mode Plus clear register offset from set register
> + */
> +struct stm32_i2c_data {
>  	u32 fmp_clr_offset;
>  };
>  
> @@ -201,7 +207,7 @@ struct stm32_i2c_timings {
>  struct stm32_i2c_priv {
>  	struct stm32_i2c_regs *regs;
>  	struct clk clk;
> -	struct stm32_i2c_setup *setup;
> +	struct stm32_i2c_setup setup;
>  	u32 speed;
>  	struct regmap *regmap;
>  	u32 regmap_sreg;
> @@ -251,18 +257,11 @@ static const struct stm32_i2c_spec i2c_specs[] = {
>  	},
>  };
>  
> -static const struct stm32_i2c_setup stm32f7_setup = {
> -	.rise_time = STM32_I2C_RISE_TIME_DEFAULT,
> -	.fall_time = STM32_I2C_FALL_TIME_DEFAULT,
> -	.dnf = STM32_I2C_DNF_DEFAULT,
> -	.analog_filter = STM32_I2C_ANALOG_FILTER_ENABLE,
> +static const struct stm32_i2c_data stm32f7_data = {
> +	.fmp_clr_offset = 0x00,
>  };
>  
> -static const struct stm32_i2c_setup stm32mp15_setup = {
> -	.rise_time = STM32_I2C_RISE_TIME_DEFAULT,
> -	.fall_time = STM32_I2C_FALL_TIME_DEFAULT,
> -	.dnf = STM32_I2C_DNF_DEFAULT,
> -	.analog_filter = STM32_I2C_ANALOG_FILTER_ENABLE,
> +static const struct stm32_i2c_data stm32mp15_data = {
>  	.fmp_clr_offset = 0x40,
>  };
>  
> @@ -745,7 +744,7 @@ static u32 get_lower_rate(u32 rate)
>  static int stm32_i2c_setup_timing(struct stm32_i2c_priv *i2c_priv,
>  				  struct stm32_i2c_timings *timing)
>  {
> -	struct stm32_i2c_setup *setup = i2c_priv->setup;
> +	struct stm32_i2c_setup *setup = &i2c_priv->setup;
>  	int ret = 0;
>  
>  	setup->speed_freq = i2c_priv->speed;
> @@ -839,10 +838,11 @@ static int stm32_i2c_hw_config(struct stm32_i2c_priv *i2c_priv)
>  	writel(timing, &regs->timingr);
>  
>  	/* Enable I2C */
> -	if (i2c_priv->setup->analog_filter)
> +	if (i2c_priv->setup.analog_filter)
>  		clrbits_le32(&regs->cr1, STM32_I2C_CR1_ANFOFF);
>  	else
>  		setbits_le32(&regs->cr1, STM32_I2C_CR1_ANFOFF);
> +
>  	setbits_le32(&regs->cr1, STM32_I2C_CR1_PE);
>  
>  	return 0;
> @@ -903,21 +903,23 @@ clk_free:
>  
>  static int stm32_of_to_plat(struct udevice *dev)
>  {
> +	const struct stm32_i2c_data *data;
>  	struct stm32_i2c_priv *i2c_priv = dev_get_priv(dev);
>  	u32 rise_time, fall_time;
>  	int ret;
>  
> -	i2c_priv->setup = (struct stm32_i2c_setup *)dev_get_driver_data(dev);
> -	if (!i2c_priv->setup)
> +	data = (const struct stm32_i2c_data *)dev_get_driver_data(dev);
> +	if (!data)
>  		return -EINVAL;
>  
> -	rise_time = dev_read_u32_default(dev, "i2c-scl-rising-time-ns", 0);
> -	if (rise_time)
> -		i2c_priv->setup->rise_time = rise_time;
> +	rise_time = dev_read_u32_default(dev, "i2c-scl-rising-time-ns",
> +					 STM32_I2C_RISE_TIME_DEFAULT);
> +
> +	fall_time = dev_read_u32_default(dev, "i2c-scl-falling-time-ns",
> +					 STM32_I2C_FALL_TIME_DEFAULT);
>  
> -	fall_time = dev_read_u32_default(dev, "i2c-scl-falling-time-ns", 0);
> -	if (fall_time)
> -		i2c_priv->setup->fall_time = fall_time;
> +	i2c_priv->setup.dnf = STM32_I2C_DNF_DEFAULT;
> +	i2c_priv->setup.analog_filter = STM32_I2C_ANALOG_FILTER_ENABLE;
>  
>  	/* Optional */
>  	i2c_priv->regmap = syscon_regmap_lookup_by_phandle(dev,
> @@ -930,8 +932,7 @@ static int stm32_of_to_plat(struct udevice *dev)
>  			return ret;
>  
>  		i2c_priv->regmap_sreg = fmp[1];
> -		i2c_priv->regmap_creg = fmp[1] +
> -					i2c_priv->setup->fmp_clr_offset;
> +		i2c_priv->regmap_creg = fmp[1] + data->fmp_clr_offset;
>  		i2c_priv->regmap_mask = fmp[2];
>  	}
>  
> @@ -944,8 +945,8 @@ static const struct dm_i2c_ops stm32_i2c_ops = {
>  };
>  
>  static const struct udevice_id stm32_i2c_of_match[] = {
> -	{ .compatible = "st,stm32f7-i2c", .data = (ulong)&stm32f7_setup },
> -	{ .compatible = "st,stm32mp15-i2c", .data = (ulong)&stm32mp15_setup },
> +	{ .compatible = "st,stm32f7-i2c", .data = (ulong)&stm32f7_data },
> +	{ .compatible = "st,stm32mp15-i2c", .data = (ulong)&stm32mp15_data },
>  	{}
>  };
>  
> 
Applied on u-boot-stm32 for next
Thanks
Patrice

  parent reply	other threads:[~2021-10-08  6:43 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-03 10:05 [PATCH v1 0/7] i2c: stm32f7: driver update Patrice Chotard
2021-08-03 10:05 ` [PATCH v1 1/7] i2c: stm32f7: move driver data of each instance in a privdata Patrice Chotard
2021-08-19 11:46   ` Patrice CHOTARD
2021-10-08  6:43   ` Patrice CHOTARD [this message]
2021-08-03 10:05 ` [PATCH v1 2/7] arm: dts: stm32: Add i2c-analog-filter property in I2C nodes for stm32f746 Patrice Chotard
2021-08-19 11:46   ` Patrice CHOTARD
2021-10-08  6:43   ` Patrice CHOTARD
2021-08-03 10:05 ` [PATCH v1 3/7] arm: dts: stm32: Add i2c-analog-filter property in I2C nodes for stm32h743 Patrice Chotard
2021-08-19 11:47   ` Patrice CHOTARD
2021-10-08  6:43   ` Patrice CHOTARD
2021-08-03 10:05 ` [PATCH v1 4/7] i2c: stm32f7: support DT binding i2c-analog-filter Patrice Chotard
2021-08-19 11:47   ` Patrice CHOTARD
2021-10-08  6:43   ` Patrice CHOTARD
2021-08-03 10:05 ` [PATCH v1 5/7] i2c: stm32f7: fix configuration of the digital filter Patrice Chotard
2021-08-19 11:47   ` Patrice CHOTARD
2021-10-08  6:44   ` Patrice CHOTARD
2021-08-03 10:05 ` [PATCH v1 6/7] i2c: stm32f7: add support for DNF i2c-digital-filter binding Patrice Chotard
2021-08-19 11:47   ` Patrice CHOTARD
2021-10-08  6:44   ` Patrice CHOTARD
2021-10-08  6:44     ` Patrice CHOTARD
2021-08-03 10:05 ` [PATCH v1 7/7] i2c: stm32f7: compute i2cclk only one time Patrice Chotard
2021-08-19 11:47   ` Patrice CHOTARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8818633f-3a68-5d14-c6c3-bbd6643f2eb7@foss.st.com \
    --to=patrice.chotard@foss.st.com \
    --cc=hs@denx.de \
    --cc=patrick.delaunay@foss.st.com \
    --cc=u-boot@lists.denx.de \
    --cc=uboot-stm32@st-md-mailman.stormreply.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.