* use xilinx gpio from linux on a ppc405
@ 2008-07-17 12:09 Joachim Meyer
2008-10-29 0:00 ` needhelp to install linux 2.6 on ppc405 of a virtex II pro saadia
2008-12-15 9:12 ` use xilinx gpio from linux on a ppc405 xavier.vvv
0 siblings, 2 replies; 8+ messages in thread
From: Joachim Meyer @ 2008-07-17 12:09 UTC (permalink / raw)
To: linuxppc-embedded
Hi
I installed (with some help of this mailinglist) a Linux (Kernel 2.6.23 from xilinx) on a ppc405 of a Virtex 2 PRO on a XUPV2P. Then I installed Xenomai. Now I want to control some devices from the Board, so I thought first I try to turn the LEDs on and of. I enabled the LEDs in my Design without interrupt and also compiled the Kernel with Xilinx OPG GPIO support. But I don't know realy how to go on. I found only 2 pages in the internet which gave me a bit of information, but nothing helped me.
Can Anyone explain me what I have to do, or send me a link to a page where it is explained?
The 2 pages I found:
--------------------------
http://osdir.com/ml/linux.uclinux.microblaze/2005-08/msg00120.html
http://www.tango-controls.org/Members/jbutanowicz/tango-on-ml403
The output of the kernel while booting:
-------------------------------------------------
Linux version 2.6.23xlnx (meyer@tiv007) (gcc version 3.4.5) #1 Thu Jul 17 12:10:27 CEST 2008
Xilinx Generic PowerPC board support package (Xilinx XUPV2P) (Virtex-II Pro)
Zone PFN ranges:
DMA 0 -> 65536
Normal 65536 -> 65536
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 65536
Built 1 zonelists in Zone order. Total pages: 65024
Kernel command line: console=ttyUL0 root=/dev/xsa2 rw
Xilinx INTC #0 at 0x41200000 mapped to 0xFDFFF000
PID hash table entries: 1024 (order: 10, 4096 bytes)
Console: colour dummy device 80x25
Console: Xilinx UART Lite
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 257664k available (1580k kernel code, 500k data, 96k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
Registering device uartlite:0
Registering device xsysace:0
Registering device xilinx_emac:0
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
uartlite.0: ttyUL0 at MMIO 0x40600003 (irq = 3) is a uartlite
console [ttyUL0] enabled
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
System ACE at 0x41800000 mapped to 0xD1020000, irq=1, 500472KB
xsa: xsa1 xsa2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
xilinx_emac xilinx_emac.0: MAC address is now 2: 0: 0: 0: 0: 0
XEmac: using fifo mode.
XEmac: Detected PHY at address 0, ManufID 0x0013, Rev. 0x78e2.
eth0: Dropping NETIF_F_SG since no checksum feature.
eth0: Xilinx 10/100 EMAC at 0x80400000 mapped to 0xD1040000, irq=2
eth0: XEmac id 1.1a, block id 32, type 1
mice: PS/2 mouse device common for all mice
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on xsa2, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem).
Freeing unused kernel memory: 96k init
INIT: version 2.85 booting
Welcome to DENX Embedded Linux Environment
Press 'I' to enter interactive startup.
Building the cache [ OK ]
storage network audio done[ OK ]
Cannot access the Hardware Clock via any known method.
Use the --debug option to see the details of our search for an access method.
Setting clock : Thu Jan 1 00:00:20 UTC 1970 [ OK ]
Setting hostname localhost: [ OK ]
Checking filesystems
Checking all file systems.
[ OK ]
Mounting local filesystems: [ OK ]
Enabling swap space: [ OK ]
INIT: Entering runlevel: 3
Entering non-interactive startup
Bringing up loopback interface: [ OK ]
Starting system logger: [ OK ]
Starting kernel logger: [ OK ]
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
XSysAce: Queue is plugged
Starting portmap: [ OK ]
Mounting NFS filesystems: XSysAce: Queue is plugged
[ OK ]
XSysAce: Queue is plugged
Mounting other filesystems: [ OK ]
DENX ELDK version 4.1 build 2007-01-19
Linux 2.6.23xlnx on a ppc
localhost login:
Thanks and Greez
Joachim
_________________________________________________________________________
In 5 Schritten zur eigenen Homepage. Jetzt Domain sichern und gestalten!
Nur 3,99 EUR/Monat! http://www.maildomain.web.de/?mc=021114
^ permalink raw reply [flat|nested] 8+ messages in thread* needhelp to install linux 2.6 on ppc405 of a virtex II pro
2008-07-17 12:09 use xilinx gpio from linux on a ppc405 Joachim Meyer
@ 2008-10-29 0:00 ` saadia
2008-10-29 16:08 ` John Linn
2008-12-15 9:12 ` use xilinx gpio from linux on a ppc405 xavier.vvv
1 sibling, 1 reply; 8+ messages in thread
From: saadia @ 2008-10-29 0:00 UTC (permalink / raw)
To: linuxppc-embedded
Hi
I want to install linux 2.6 on a ppc405 of a virtex II pro, and then patch
it with rtai or xenomai. Is there some tutorial explaining the installation
procedure (where to find sources, drivers etc).
I have found this link:
http://users.telenet.be/steven.kauffmann/installation/index.htm
but it concerns linux 2.4;
Can anyone help me to find useful links or documents to install the 2.6
kernel whith a real time extension?
Thanks
--
View this message in context: http://www.nabble.com/use-xilinx-gpio-from-linux-on-a-ppc405-tp18507061p20218592.html
Sent from the linuxppc-embedded mailing list archive at Nabble.com.
^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: needhelp to install linux 2.6 on ppc405 of a virtex II pro
2008-10-29 0:00 ` needhelp to install linux 2.6 on ppc405 of a virtex II pro saadia
@ 2008-10-29 16:08 ` John Linn
0 siblings, 0 replies; 8+ messages in thread
From: John Linn @ 2008-10-29 16:08 UTC (permalink / raw)
To: saadia, linuxppc-embedded
We don't directly support the V2Pro, but we do support the Virtex 4
which also uses the ppc405 in the Xilinx GIT Tree.
git://git.xilinx.com
http://git.xilinx.com
You should make sure that you use arch/powerpc rather than arch/ppc
which many older web sites have tutorials about. Arch/ppc is not longer
supported.
You can find more information about this at http://xilinx.wikidot.com
This information assumes you already know Xilinx products and is not a
tutorial on all Xilinx products. It also assumes you know Linux so it
is really the Xilinx unique aspects of the kernel/BSP.
We've now created a forum for Embedded Linux at Xilinx at the following
location.
http://forums.xilinx.com
Thanks,
John
> -----Original Message-----
> From: linuxppc-embedded-bounces+john.linn=3Dxilinx.com@ozlabs.org
[mailto:linuxppc-embedded-
> bounces+john.linn=3Dxilinx.com@ozlabs.org] On Behalf Of saadia
> Sent: Tuesday, October 28, 2008 6:00 PM
> To: linuxppc-embedded@ozlabs.org
> Subject: needhelp to install linux 2.6 on ppc405 of a virtex II pro
> =
> =
> Hi
> I want to install linux 2.6 on a ppc405 of a virtex II pro, and then
patch
> it with rtai or xenomai. Is there some tutorial explaining the
installation
> procedure (where to find sources, drivers etc).
> I have found this link:
> http://users.telenet.be/steven.kauffmann/installation/index.htm
> but it concerns linux 2.4;
> Can anyone help me to find useful links or documents to install the
2.6
> kernel whith a real time extension?
> Thanks
> =
> --
> View this message in context:
http://www.nabble.com/use-xilinx-gpio-from-linux-on-a-ppc405-
> tp18507061p20218592.html
> Sent from the linuxppc-embedded mailing list archive at Nabble.com.
> =
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
This email and any attachments are intended for the sole use of the named r=
ecipient(s) and contain(s) confidential information that may be proprietary=
, privileged or copyrighted under applicable law. If you are not the intend=
ed recipient, do not read, copy, or forward this email message or any attac=
hments. Delete this email message and any attachments immediately.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: use xilinx gpio from linux on a ppc405
2008-07-17 12:09 use xilinx gpio from linux on a ppc405 Joachim Meyer
2008-10-29 0:00 ` needhelp to install linux 2.6 on ppc405 of a virtex II pro saadia
@ 2008-12-15 9:12 ` xavier.vvv
2008-12-15 11:18 ` Jan Mueller
1 sibling, 1 reply; 8+ messages in thread
From: xavier.vvv @ 2008-12-15 9:12 UTC (permalink / raw)
To: linuxppc-embedded
Hi,
I have installed linux 2.6 on the xupv2p board. I have uart, ethernet, but
sysace device is not working.
I have seen in this forum that other persons have the problem.
Could you tell me if you have sysace driver working?
Also I want to install xenomai, but the problem is that linux from denx tree
does not support opb_emac ethernet
driver. I need Ethernet because I use nfs to access the root file system.
So another question is:
when you installed xenomai, where was the rfs? and did you used Ethernet
driver?
Thanks
Joachim Meyer wrote:
>
> Hi
>
> I installed (with some help of this mailinglist) a Linux (Kernel 2.6.23
> from xilinx) on a ppc405 of a Virtex 2 PRO on a XUPV2P. Then I installed
> Xenomai. Now I want to control some devices from the Board, so I thought
> first I try to turn the LEDs on and of. I enabled the LEDs in my Design
> without interrupt and also compiled the Kernel with Xilinx OPG GPIO
> support. But I don't know realy how to go on. I found only 2 pages in the
> internet which gave me a bit of information, but nothing helped me.
> Can Anyone explain me what I have to do, or send me a link to a page where
> it is explained?
>
> The 2 pages I found:
> --------------------------
> http://osdir.com/ml/linux.uclinux.microblaze/2005-08/msg00120.html
> http://www.tango-controls.org/Members/jbutanowicz/tango-on-ml403
>
> The output of the kernel while booting:
> -------------------------------------------------
> Linux version 2.6.23xlnx (meyer@tiv007) (gcc version 3.4.5) #1 Thu Jul 17
> 12:10:27 CEST 2008
> Xilinx Generic PowerPC board support package (Xilinx XUPV2P) (Virtex-II
> Pro)
> Zone PFN ranges:
> DMA 0 -> 65536
> Normal 65536 -> 65536
> Movable zone start PFN for each node
> early_node_map[1] active PFN ranges
> 0: 0 -> 65536
> Built 1 zonelists in Zone order. Total pages: 65024
> Kernel command line: console=ttyUL0 root=/dev/xsa2 rw
> Xilinx INTC #0 at 0x41200000 mapped to 0xFDFFF000
> PID hash table entries: 1024 (order: 10, 4096 bytes)
> Console: colour dummy device 80x25
> Console: Xilinx UART Lite
> Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
> Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
> Memory: 257664k available (1580k kernel code, 500k data, 96k init, 0k
> highmem)
> Mount-cache hash table entries: 512
> NET: Registered protocol family 16
> Registering device uartlite:0
> Registering device xsysace:0
> Registering device xilinx_emac:0
> NET: Registered protocol family 2
> IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
> TCP established hash table entries: 8192 (order: 4, 65536 bytes)
> TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
> TCP: Hash tables configured (established 8192 bind 8192)
> TCP reno registered
> io scheduler noop registered
> io scheduler anticipatory registered (default)
> io scheduler deadline registered
> io scheduler cfq registered
> uartlite.0: ttyUL0 at MMIO 0x40600003 (irq = 3) is a uartlite
> console [ttyUL0] enabled
> RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
> System ACE at 0x41800000 mapped to 0xD1020000, irq=1, 500472KB
> xsa: xsa1 xsa2
> tun: Universal TUN/TAP device driver, 1.6
> tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
> xilinx_emac xilinx_emac.0: MAC address is now 2: 0: 0: 0: 0: 0
> XEmac: using fifo mode.
> XEmac: Detected PHY at address 0, ManufID 0x0013, Rev. 0x78e2.
> eth0: Dropping NETIF_F_SG since no checksum feature.
> eth0: Xilinx 10/100 EMAC at 0x80400000 mapped to 0xD1040000, irq=2
> eth0: XEmac id 1.1a, block id 32, type 1
> mice: PS/2 mouse device common for all mice
> TCP cubic registered
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> kjournald starting. Commit interval 5 seconds
> EXT3-fs warning: maximal mount count reached, running e2fsck is
> recommended
> EXT3 FS on xsa2, internal journal
> EXT3-fs: recovery complete.
> EXT3-fs: mounted filesystem with ordered data mode.
> VFS: Mounted root (ext3 filesystem).
> Freeing unused kernel memory: 96k init
> INIT: version 2.85 booting
> Welcome to DENX Embedded Linux Environment
> Press 'I' to enter interactive startup.
> Building the cache [ OK ]
> storage network audio done[ OK ]
> Cannot access the Hardware Clock via any known method.
> Use the --debug option to see the details of our search for an access
> method.
> Setting clock : Thu Jan 1 00:00:20 UTC 1970 [ OK ]
> Setting hostname localhost: [ OK ]
> Checking filesystems
> Checking all file systems.
> [ OK ]
> Mounting local filesystems: [ OK ]
> Enabling swap space: [ OK ]
> INIT: Entering runlevel: 3
> Entering non-interactive startup
> Bringing up loopback interface: [ OK ]
> Starting system logger: [ OK ]
> Starting kernel logger: [ OK ]
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> XSysAce: Queue is plugged
> Starting portmap: [ OK ]
> Mounting NFS filesystems: XSysAce: Queue is plugged
> [ OK ]
> XSysAce: Queue is plugged
> Mounting other filesystems: [ OK ]
>
> DENX ELDK version 4.1 build 2007-01-19
> Linux 2.6.23xlnx on a ppc
>
> localhost login:
>
>
>
>
>
> Thanks and Greez
> Joachim
> _________________________________________________________________________
> In 5 Schritten zur eigenen Homepage. Jetzt Domain sichern und gestalten!
> Nur 3,99 EUR/Monat! http://www.maildomain.web.de/?mc=021114
>
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>
>
--
View this message in context: http://www.nabble.com/use-xilinx-gpio-from-linux-on-a-ppc405-tp18507061p21010485.html
Sent from the linuxppc-embedded mailing list archive at Nabble.com.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: use xilinx gpio from linux on a ppc405
2008-12-15 9:12 ` use xilinx gpio from linux on a ppc405 xavier.vvv
@ 2008-12-15 11:18 ` Jan Mueller
2008-12-15 11:35 ` xavier.vvv
0 siblings, 1 reply; 8+ messages in thread
From: Jan Mueller @ 2008-12-15 11:18 UTC (permalink / raw)
To: xavier.vvv; +Cc: linuxppc-embedded
Hi,
This is interesting...
I have the sysace working but the ethernet not.
Just an idea:
For the sysace driver in the 2.6 kernel the old device file
entries don't work anymore.
Do you have the correct device nodes in /dev? You can create those
nodes with the following commands:
# mknod -m 660 xsa b 254 0
# mknod -m 660 xsa1 b 254 1
# mknod -m 660 xsa2 b 254 2
# mknod -m 660 xsa3 b 254 3
Concerning the ethernet...: ;-)
Which IP Type do you have for the Ethernet_MAC? Mine is
xps_ethernetlite but I can't find a linux driver which seems to
work with this one.
regards,
Jan
On Mon, Dec 15, 2008 at 01:12:18 -0800, xavier.vvv wrote:
>
> Hi,
> I have installed linux 2.6 on the xupv2p board. I have uart, ethernet, but
> sysace device is not working.
> I have seen in this forum that other persons have the problem.
> Could you tell me if you have sysace driver working?
> Also I want to install xenomai, but the problem is that linux from denx tree
> does not support opb_emac ethernet
> driver. I need Ethernet because I use nfs to access the root file system.
> So another question is:
> when you installed xenomai, where was the rfs? and did you used Ethernet
> driver?
>
> Thanks
>
>
> Joachim Meyer wrote:
> >
> > Hi
> >
> > I installed (with some help of this mailinglist) a Linux (Kernel 2.6.23
> > from xilinx) on a ppc405 of a Virtex 2 PRO on a XUPV2P. Then I installed
> > Xenomai. Now I want to control some devices from the Board, so I thought
> > first I try to turn the LEDs on and of. I enabled the LEDs in my Design
> > without interrupt and also compiled the Kernel with Xilinx OPG GPIO
> > support. But I don't know realy how to go on. I found only 2 pages in the
> > internet which gave me a bit of information, but nothing helped me.
> > Can Anyone explain me what I have to do, or send me a link to a page where
> > it is explained?
> >
> > The 2 pages I found:
> > --------------------------
> > http://osdir.com/ml/linux.uclinux.microblaze/2005-08/msg00120.html
> > http://www.tango-controls.org/Members/jbutanowicz/tango-on-ml403
> >
> > The output of the kernel while booting:
> > -------------------------------------------------
> > Linux version 2.6.23xlnx (meyer@tiv007) (gcc version 3.4.5) #1 Thu Jul 17
> > 12:10:27 CEST 2008
> > Xilinx Generic PowerPC board support package (Xilinx XUPV2P) (Virtex-II
> > Pro)
> > Zone PFN ranges:
> > DMA 0 -> 65536
> > Normal 65536 -> 65536
> > Movable zone start PFN for each node
> > early_node_map[1] active PFN ranges
> > 0: 0 -> 65536
> > Built 1 zonelists in Zone order. Total pages: 65024
> > Kernel command line: console=ttyUL0 root=/dev/xsa2 rw
> > Xilinx INTC #0 at 0x41200000 mapped to 0xFDFFF000
> > PID hash table entries: 1024 (order: 10, 4096 bytes)
> > Console: colour dummy device 80x25
> > Console: Xilinx UART Lite
> > Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
> > Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
> > Memory: 257664k available (1580k kernel code, 500k data, 96k init, 0k
> > highmem)
> > Mount-cache hash table entries: 512
> > NET: Registered protocol family 16
> > Registering device uartlite:0
> > Registering device xsysace:0
> > Registering device xilinx_emac:0
> > NET: Registered protocol family 2
> > IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
> > TCP established hash table entries: 8192 (order: 4, 65536 bytes)
> > TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
> > TCP: Hash tables configured (established 8192 bind 8192)
> > TCP reno registered
> > io scheduler noop registered
> > io scheduler anticipatory registered (default)
> > io scheduler deadline registered
> > io scheduler cfq registered
> > uartlite.0: ttyUL0 at MMIO 0x40600003 (irq = 3) is a uartlite
> > console [ttyUL0] enabled
> > RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
> > System ACE at 0x41800000 mapped to 0xD1020000, irq=1, 500472KB
> > xsa: xsa1 xsa2
> > tun: Universal TUN/TAP device driver, 1.6
> > tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
> > xilinx_emac xilinx_emac.0: MAC address is now 2: 0: 0: 0: 0: 0
> > XEmac: using fifo mode.
> > XEmac: Detected PHY at address 0, ManufID 0x0013, Rev. 0x78e2.
> > eth0: Dropping NETIF_F_SG since no checksum feature.
> > eth0: Xilinx 10/100 EMAC at 0x80400000 mapped to 0xD1040000, irq=2
> > eth0: XEmac id 1.1a, block id 32, type 1
> > mice: PS/2 mouse device common for all mice
> > TCP cubic registered
> > NET: Registered protocol family 1
> > NET: Registered protocol family 17
> > kjournald starting. Commit interval 5 seconds
> > EXT3-fs warning: maximal mount count reached, running e2fsck is
> > recommended
> > EXT3 FS on xsa2, internal journal
> > EXT3-fs: recovery complete.
> > EXT3-fs: mounted filesystem with ordered data mode.
> > VFS: Mounted root (ext3 filesystem).
> > Freeing unused kernel memory: 96k init
> > INIT: version 2.85 booting
> > Welcome to DENX Embedded Linux Environment
> > Press 'I' to enter interactive startup.
> > Building the cache [ OK ]
> > storage network audio done[ OK ]
> > Cannot access the Hardware Clock via any known method.
> > Use the --debug option to see the details of our search for an access
> > method.
> > Setting clock : Thu Jan 1 00:00:20 UTC 1970 [ OK ]
> > Setting hostname localhost: [ OK ]
> > Checking filesystems
> > Checking all file systems.
> > [ OK ]
> > Mounting local filesystems: [ OK ]
> > Enabling swap space: [ OK ]
> > INIT: Entering runlevel: 3
> > Entering non-interactive startup
> > Bringing up loopback interface: [ OK ]
> > Starting system logger: [ OK ]
> > Starting kernel logger: [ OK ]
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > XSysAce: Queue is plugged
> > Starting portmap: [ OK ]
> > Mounting NFS filesystems: XSysAce: Queue is plugged
> > [ OK ]
> > XSysAce: Queue is plugged
> > Mounting other filesystems: [ OK ]
> >
> > DENX ELDK version 4.1 build 2007-01-19
> > Linux 2.6.23xlnx on a ppc
> >
> > localhost login:
> >
> >
> >
> >
> >
> > Thanks and Greez
> > Joachim
> > _________________________________________________________________________
> > In 5 Schritten zur eigenen Homepage. Jetzt Domain sichern und gestalten!
> > Nur 3,99 EUR/Monat! http://www.maildomain.web.de/?mc=021114
> >
> > _______________________________________________
> > Linuxppc-embedded mailing list
> > Linuxppc-embedded@ozlabs.org
> > https://ozlabs.org/mailman/listinfo/linuxppc-embedded
> >
> >
>
> --
> View this message in context: http://www.nabble.com/use-xilinx-gpio-from-linux-on-a-ppc405-tp18507061p21010485.html
> Sent from the linuxppc-embedded mailing list archive at Nabble.com.
>
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: use xilinx gpio from linux on a ppc405
2008-12-15 11:18 ` Jan Mueller
@ 2008-12-15 11:35 ` xavier.vvv
2008-12-15 12:37 ` Jan Mueller
0 siblings, 1 reply; 8+ messages in thread
From: xavier.vvv @ 2008-12-15 11:35 UTC (permalink / raw)
To: linuxppc-embedded
Hi Jan,
I used EDK 9.1 and I have the opb_emac ethernet controller.
I selected Xilinx 10/100 opb emac support in linux 2.6 configuration (devic=
e
drivers/ Network device support/ Ethernet (10 or 100Mbit) ).
Concerning sysace, you have downloaded linux 2.6 from denx or xilinx tree?
I will try creating xsa nodes . Hope that it will work.
Thanks
Xavier
Jan M=C3=BCller wrote:
>=20
> Hi,
>=20
> This is interesting...
>=20
> I have the sysace working but the ethernet not.
>=20
> Just an idea:
> For the sysace driver in the 2.6 kernel the old device file
> entries don't work anymore.
>=20
> Do you have the correct device nodes in /dev? You can create those
> nodes with the following commands:
>=20
> # mknod -m 660 xsa b 254 0
> # mknod -m 660 xsa1 b 254 1
> # mknod -m 660 xsa2 b 254 2
> # mknod -m 660 xsa3 b 254 3
>=20
>=20
> Concerning the ethernet...: ;-)
> Which IP Type do you have for the Ethernet_MAC? Mine is
> xps_ethernetlite but I can't find a linux driver which seems to
> work with this one.
>=20
> regards,
> Jan
>=20
>=20
> On Mon, Dec 15, 2008 at 01:12:18 -0800, xavier.vvv wrote:
>>=20
>> Hi,
>> I have installed linux 2.6 on the xupv2p board. I have uart, ethernet,
>> but
>> sysace device is not working.
>> I have seen in this forum that other persons have the problem.
>> Could you tell me if you have sysace driver working?
>> Also I want to install xenomai, but the problem is that linux from denx
>> tree
>> does not support opb_emac ethernet=20
>> driver. I need Ethernet because I use nfs to access the root file system=
.
>> So another question is:=20
>> when you installed xenomai, where was the rfs? and did you used Ethernet
>> driver?
>>=20
>> Thanks
>>=20
>>=20
>> Joachim Meyer wrote:
>> >=20
>> > Hi
>> >=20
>> > I installed (with some help of this mailinglist) a Linux (Kernel 2.6.2=
3
>> > from xilinx) on a ppc405 of a Virtex 2 PRO on a XUPV2P. Then I
>> installed
>> > Xenomai. Now I want to control some devices from the Board, so I
>> thought
>> > first I try to turn the LEDs on and of. I enabled the LEDs in my Desig=
n
>> > without interrupt and also compiled the Kernel with Xilinx OPG GPIO
>> > support. But I don't know realy how to go on. I found only 2 pages in
>> the
>> > internet which gave me a bit of information, but nothing helped me.
>> > Can Anyone explain me what I have to do, or send me a link to a page
>> where
>> > it is explained?
>> >=20
>> > The 2 pages I found:
>> > --------------------------
>> > http://osdir.com/ml/linux.uclinux.microblaze/2005-08/msg00120.html
>> > http://www.tango-controls.org/Members/jbutanowicz/tango-on-ml403
>> >=20
>> > The output of the kernel while booting:
>> > -------------------------------------------------
>> > Linux version 2.6.23xlnx (meyer@tiv007) (gcc version 3.4.5) #1 Thu Jul
>> 17
>> > 12:10:27 CEST 2008
>> > Xilinx Generic PowerPC board support package (Xilinx XUPV2P) (Virtex-I=
I
>> > Pro)
>> > Zone PFN ranges:
>> > DMA 0 -> 65536
>> > Normal 65536 -> 65536
>> > Movable zone start PFN for each node
>> > early_node_map[1] active PFN ranges
>> > 0: 0 -> 65536
>> > Built 1 zonelists in Zone order. Total pages: 65024
>> > Kernel command line: console=3DttyUL0 root=3D/dev/xsa2 rw
>> > Xilinx INTC #0 at 0x41200000 mapped to 0xFDFFF000
>> > PID hash table entries: 1024 (order: 10, 4096 bytes)
>> > Console: colour dummy device 80x25
>> > Console: Xilinx UART Lite
>> > Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
>> > Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
>> > Memory: 257664k available (1580k kernel code, 500k data, 96k init, 0k
>> > highmem)
>> > Mount-cache hash table entries: 512
>> > NET: Registered protocol family 16
>> > Registering device uartlite:0
>> > Registering device xsysace:0
>> > Registering device xilinx_emac:0
>> > NET: Registered protocol family 2
>> > IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
>> > TCP established hash table entries: 8192 (order: 4, 65536 bytes)
>> > TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
>> > TCP: Hash tables configured (established 8192 bind 8192)
>> > TCP reno registered
>> > io scheduler noop registered
>> > io scheduler anticipatory registered (default)
>> > io scheduler deadline registered
>> > io scheduler cfq registered
>> > uartlite.0: ttyUL0 at MMIO 0x40600003 (irq =3D 3) is a uartlite
>> > console [ttyUL0] enabled
>> > RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
>> > System ACE at 0x41800000 mapped to 0xD1020000, irq=3D1, 500472KB
>> > xsa: xsa1 xsa2
>> > tun: Universal TUN/TAP device driver, 1.6
>> > tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>> > xilinx_emac xilinx_emac.0: MAC address is now 2: 0: 0: 0: 0: 0
>> > XEmac: using fifo mode.
>> > XEmac: Detected PHY at address 0, ManufID 0x0013, Rev. 0x78e2.
>> > eth0: Dropping NETIF_F_SG since no checksum feature.
>> > eth0: Xilinx 10/100 EMAC at 0x80400000 mapped to 0xD1040000, irq=3D2
>> > eth0: XEmac id 1.1a, block id 32, type 1
>> > mice: PS/2 mouse device common for all mice
>> > TCP cubic registered
>> > NET: Registered protocol family 1
>> > NET: Registered protocol family 17
>> > kjournald starting. Commit interval 5 seconds
>> > EXT3-fs warning: maximal mount count reached, running e2fsck is
>> > recommended
>> > EXT3 FS on xsa2, internal journal
>> > EXT3-fs: recovery complete.
>> > EXT3-fs: mounted filesystem with ordered data mode.
>> > VFS: Mounted root (ext3 filesystem).
>> > Freeing unused kernel memory: 96k init
>> > INIT: version 2.85 booting
>> > Welcome to DENX Embedded Linux Environment
>> > Press 'I' to enter interactive startup.
>> > Building the cache [ OK ]
>> > storage network audio done[ OK ]
>> > Cannot access the Hardware Clock via any known method.
>> > Use the --debug option to see the details of our search for an access
>> > method.
>> > Setting clock : Thu Jan 1 00:00:20 UTC 1970 [ OK ]
>> > Setting hostname localhost: [ OK ]
>> > Checking filesystems
>> > Checking all file systems.
>> > [ OK ]
>> > Mounting local filesystems: [ OK ]
>> > Enabling swap space: [ OK ]
>> > INIT: Entering runlevel: 3
>> > Entering non-interactive startup
>> > Bringing up loopback interface: [ OK ]
>> > Starting system logger: [ OK ]
>> > Starting kernel logger: [ OK ]
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > XSysAce: Queue is plugged
>> > Starting portmap: [ OK ]
>> > Mounting NFS filesystems: XSysAce: Queue is plugged
>> > [ OK ]
>> > XSysAce: Queue is plugged
>> > Mounting other filesystems: [ OK ]
>> >=20
>> > DENX ELDK version 4.1 build 2007-01-19
>> > Linux 2.6.23xlnx on a ppc
>> >=20
>> > localhost login:
>> >=20
>> >=20
>> >=20
>> >=20
>> >=20
>> > Thanks and Greez
>> > Joachim
>> >
>> ________________________________________________________________________=
_
>> > In 5 Schritten zur eigenen Homepage. Jetzt Domain sichern und
>> gestalten!=20
>> > Nur 3,99 EUR/Monat! http://www.maildomain.web.de/?mc=3D021114
>> >=20
>> > _______________________________________________
>> > Linuxppc-embedded mailing list
>> > Linuxppc-embedded@ozlabs.org
>> > https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>> >=20
>> >=20
>>=20
>> --=20
>> View this message in context:
>> http://www.nabble.com/use-xilinx-gpio-from-linux-on-a-ppc405-tp18507061p=
21010485.html
>> Sent from the linuxppc-embedded mailing list archive at Nabble.com.
>>=20
>> _______________________________________________
>> Linuxppc-embedded mailing list
>> Linuxppc-embedded@ozlabs.org
>> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>=20
>=20
--=20
View this message in context: http://www.nabble.com/use-xilinx-gpio-from-li=
nux-on-a-ppc405-tp18507061p21012378.html
Sent from the linuxppc-embedded mailing list archive at Nabble.com.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: use xilinx gpio from linux on a ppc405
2008-12-15 11:35 ` xavier.vvv
@ 2008-12-15 12:37 ` Jan Mueller
0 siblings, 0 replies; 8+ messages in thread
From: Jan Mueller @ 2008-12-15 12:37 UTC (permalink / raw)
To: xavier.vvv; +Cc: linuxppc-embedded
Hi Xavier
I downloaded the linux kernel from the xilinx git archives:
git clone git://git.xilinx.com/linux-2.6-xlnx.git
On Mon, Dec 15, 2008 at 03:35:46 -0800, xavier.vvv wrote:
>
> Hi Jan,
> I used EDK 9.1 and I have the opb_emac ethernet controller.
> I selected Xilinx 10/100 opb emac support in linux 2.6 configuration (device
In EDK 9.1 I also used the opb_emac controller. But for the fun
of it I would love to use the newer EDK 10.1 (Well, not purely
for fun. I hope to see better performance with the mpmc DDR)
But it looks like there is no chance to get my XUPV2P properly
working with EDK 10.1... Just to bad.
> drivers/ Network device support/ Ethernet (10 or 100Mbit) ).
> Concerning sysace, you have downloaded linux 2.6 from denx or xilinx tree?
> I will try creating xsa nodes . Hope that it will work.
Yes, hopefully it will work for you.
regards,
Jan
> Thanks
> Xavier
>
> Jan Müller wrote:
> >
> > Hi,
> >
> > This is interesting...
> >
> > I have the sysace working but the ethernet not.
> >
> > Just an idea:
> > For the sysace driver in the 2.6 kernel the old device file
> > entries don't work anymore.
> >
> > Do you have the correct device nodes in /dev? You can create those
> > nodes with the following commands:
> >
> > # mknod -m 660 xsa b 254 0
> > # mknod -m 660 xsa1 b 254 1
> > # mknod -m 660 xsa2 b 254 2
> > # mknod -m 660 xsa3 b 254 3
> >
> >
> > Concerning the ethernet...: ;-)
> > Which IP Type do you have for the Ethernet_MAC? Mine is
> > xps_ethernetlite but I can't find a linux driver which seems to
> > work with this one.
> >
> > regards,
> > Jan
> >
> >
> > On Mon, Dec 15, 2008 at 01:12:18 -0800, xavier.vvv wrote:
> >>
> >> Hi,
> >> I have installed linux 2.6 on the xupv2p board. I have uart, ethernet,
> >> but
> >> sysace device is not working.
> >> I have seen in this forum that other persons have the problem.
> >> Could you tell me if you have sysace driver working?
> >> Also I want to install xenomai, but the problem is that linux from denx
> >> tree
> >> does not support opb_emac ethernet
> >> driver. I need Ethernet because I use nfs to access the root file system.
> >> So another question is:
> >> when you installed xenomai, where was the rfs? and did you used Ethernet
> >> driver?
> >>
> >> Thanks
> >>
> >>
> >> Joachim Meyer wrote:
> >> >
> >> > Hi
> >> >
> >> > I installed (with some help of this mailinglist) a Linux (Kernel 2.6.23
> >> > from xilinx) on a ppc405 of a Virtex 2 PRO on a XUPV2P. Then I
> >> installed
> >> > Xenomai. Now I want to control some devices from the Board, so I
> >> thought
> >> > first I try to turn the LEDs on and of. I enabled the LEDs in my Design
> >> > without interrupt and also compiled the Kernel with Xilinx OPG GPIO
> >> > support. But I don't know realy how to go on. I found only 2 pages in
> >> the
> >> > internet which gave me a bit of information, but nothing helped me.
> >> > Can Anyone explain me what I have to do, or send me a link to a page
> >> where
> >> > it is explained?
> >> >
> >> > The 2 pages I found:
> >> > --------------------------
> >> > http://osdir.com/ml/linux.uclinux.microblaze/2005-08/msg00120.html
> >> > http://www.tango-controls.org/Members/jbutanowicz/tango-on-ml403
> >> >
> >> > The output of the kernel while booting:
> >> > -------------------------------------------------
> >> > Linux version 2.6.23xlnx (meyer@tiv007) (gcc version 3.4.5) #1 Thu Jul
> >> 17
> >> > 12:10:27 CEST 2008
> >> > Xilinx Generic PowerPC board support package (Xilinx XUPV2P) (Virtex-II
> >> > Pro)
> >> > Zone PFN ranges:
> >> > DMA 0 -> 65536
> >> > Normal 65536 -> 65536
> >> > Movable zone start PFN for each node
> >> > early_node_map[1] active PFN ranges
> >> > 0: 0 -> 65536
> >> > Built 1 zonelists in Zone order. Total pages: 65024
> >> > Kernel command line: console=ttyUL0 root=/dev/xsa2 rw
> >> > Xilinx INTC #0 at 0x41200000 mapped to 0xFDFFF000
> >> > PID hash table entries: 1024 (order: 10, 4096 bytes)
> >> > Console: colour dummy device 80x25
> >> > Console: Xilinx UART Lite
> >> > Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
> >> > Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
> >> > Memory: 257664k available (1580k kernel code, 500k data, 96k init, 0k
> >> > highmem)
> >> > Mount-cache hash table entries: 512
> >> > NET: Registered protocol family 16
> >> > Registering device uartlite:0
> >> > Registering device xsysace:0
> >> > Registering device xilinx_emac:0
> >> > NET: Registered protocol family 2
> >> > IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
> >> > TCP established hash table entries: 8192 (order: 4, 65536 bytes)
> >> > TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
> >> > TCP: Hash tables configured (established 8192 bind 8192)
> >> > TCP reno registered
> >> > io scheduler noop registered
> >> > io scheduler anticipatory registered (default)
> >> > io scheduler deadline registered
> >> > io scheduler cfq registered
> >> > uartlite.0: ttyUL0 at MMIO 0x40600003 (irq = 3) is a uartlite
> >> > console [ttyUL0] enabled
> >> > RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
> >> > System ACE at 0x41800000 mapped to 0xD1020000, irq=1, 500472KB
> >> > xsa: xsa1 xsa2
> >> > tun: Universal TUN/TAP device driver, 1.6
> >> > tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
> >> > xilinx_emac xilinx_emac.0: MAC address is now 2: 0: 0: 0: 0: 0
> >> > XEmac: using fifo mode.
> >> > XEmac: Detected PHY at address 0, ManufID 0x0013, Rev. 0x78e2.
> >> > eth0: Dropping NETIF_F_SG since no checksum feature.
> >> > eth0: Xilinx 10/100 EMAC at 0x80400000 mapped to 0xD1040000, irq=2
> >> > eth0: XEmac id 1.1a, block id 32, type 1
> >> > mice: PS/2 mouse device common for all mice
> >> > TCP cubic registered
> >> > NET: Registered protocol family 1
> >> > NET: Registered protocol family 17
> >> > kjournald starting. Commit interval 5 seconds
> >> > EXT3-fs warning: maximal mount count reached, running e2fsck is
> >> > recommended
> >> > EXT3 FS on xsa2, internal journal
> >> > EXT3-fs: recovery complete.
> >> > EXT3-fs: mounted filesystem with ordered data mode.
> >> > VFS: Mounted root (ext3 filesystem).
> >> > Freeing unused kernel memory: 96k init
> >> > INIT: version 2.85 booting
> >> > Welcome to DENX Embedded Linux Environment
> >> > Press 'I' to enter interactive startup.
> >> > Building the cache [ OK ]
> >> > storage network audio done[ OK ]
> >> > Cannot access the Hardware Clock via any known method.
> >> > Use the --debug option to see the details of our search for an access
> >> > method.
> >> > Setting clock : Thu Jan 1 00:00:20 UTC 1970 [ OK ]
> >> > Setting hostname localhost: [ OK ]
> >> > Checking filesystems
> >> > Checking all file systems.
> >> > [ OK ]
> >> > Mounting local filesystems: [ OK ]
> >> > Enabling swap space: [ OK ]
> >> > INIT: Entering runlevel: 3
> >> > Entering non-interactive startup
> >> > Bringing up loopback interface: [ OK ]
> >> > Starting system logger: [ OK ]
> >> > Starting kernel logger: [ OK ]
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > XSysAce: Queue is plugged
> >> > Starting portmap: [ OK ]
> >> > Mounting NFS filesystems: XSysAce: Queue is plugged
> >> > [ OK ]
> >> > XSysAce: Queue is plugged
> >> > Mounting other filesystems: [ OK ]
> >> >
> >> > DENX ELDK version 4.1 build 2007-01-19
> >> > Linux 2.6.23xlnx on a ppc
> >> >
> >> > localhost login:
> >> >
> >> >
> >> >
> >> >
> >> >
> >> > Thanks and Greez
> >> > Joachim
> >> >
> >> _________________________________________________________________________
> >> > In 5 Schritten zur eigenen Homepage. Jetzt Domain sichern und
> >> gestalten!
> >> > Nur 3,99 EUR/Monat! http://www.maildomain.web.de/?mc=021114
> >> >
> >> > _______________________________________________
> >> > Linuxppc-embedded mailing list
> >> > Linuxppc-embedded@ozlabs.org
> >> > https://ozlabs.org/mailman/listinfo/linuxppc-embedded
> >> >
> >> >
> >>
> >> --
> >> View this message in context:
> >> http://www.nabble.com/use-xilinx-gpio-from-linux-on-a-ppc405-tp18507061p21010485.html
> >> Sent from the linuxppc-embedded mailing list archive at Nabble.com.
> >>
> >> _______________________________________________
> >> Linuxppc-embedded mailing list
> >> Linuxppc-embedded@ozlabs.org
> >> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
> > _______________________________________________
> > Linuxppc-embedded mailing list
> > Linuxppc-embedded@ozlabs.org
> > https://ozlabs.org/mailman/listinfo/linuxppc-embedded
> >
> >
>
> --
> View this message in context: http://www.nabble.com/use-xilinx-gpio-from-linux-on-a-ppc405-tp18507061p21012378.html
> Sent from the linuxppc-embedded mailing list archive at Nabble.com.
>
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: use xilinx gpio from linux on a ppc405
@ 2008-07-17 13:40 Joachim Meyer
0 siblings, 0 replies; 8+ messages in thread
From: Joachim Meyer @ 2008-07-17 13:40 UTC (permalink / raw)
To: Jens Wirth; +Cc: linuxppc-embedded
Hi Jens
Thanks for your fast answer.
I have some questions befor I try it out:
1. Can I proof, if my gpio is correctly connected with my design or should I try it to proof it?
2. Is the code you send c? If yes, do I need any specific libaries? Then I crosscompile it, put it on my Board and it should work?
3. In edk I saw This at the 4 LEDs:
Base Adress: 0x40000000
High Adress: 0x4000ffff
How would it be for my case? Something like this:
char *mapped_address = ioremap(0x40000000, 0xffff);
writeb(0xffff, mapped_address);
iounmap(mapped_address);
I don't understand why the there are so many steps between the base and the high adress.
Thanks and Greez
Joachim
_____________________________________________________________________
Der WEB.DE SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen!
http://smartsurfer.web.de/?mc=100071&distributionid=000000000066
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2008-12-15 12:37 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-07-17 12:09 use xilinx gpio from linux on a ppc405 Joachim Meyer
2008-10-29 0:00 ` needhelp to install linux 2.6 on ppc405 of a virtex II pro saadia
2008-10-29 16:08 ` John Linn
2008-12-15 9:12 ` use xilinx gpio from linux on a ppc405 xavier.vvv
2008-12-15 11:18 ` Jan Mueller
2008-12-15 11:35 ` xavier.vvv
2008-12-15 12:37 ` Jan Mueller
2008-07-17 13:40 Joachim Meyer
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.