* [RESEND. PATCH v2] Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x0bda:0x4853
@ 2024-03-29 2:34 WangYuli
2024-03-29 3:32 ` [RESEND.,v2] " bluez.test.bot
2024-04-11 14:39 ` [RESEND. PATCH v2] " patchwork-bot+bluetooth
0 siblings, 2 replies; 3+ messages in thread
From: WangYuli @ 2024-03-29 2:34 UTC (permalink / raw)
To: wangyuli, Larry.Finger, marcel, luiz.dentz, gustavo,
johan.hedberg, guanwentao
Cc: linux-bluetooth, linux-kernel, stable
Add the support ID(0x0bda, 0x4853) to usb_device_id table for
Realtek RTL8852BE.
Without this change the device utilizes an obsolete version of
the firmware that is encoded in it rather than the updated Realtek
firmware and config files from the firmware directory. The latter
files implement many new features.
The device table is as follows:
T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=03 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=4853 Rev= 0.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Cc: stable@vger.kernel.org
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
---
drivers/bluetooth/btusb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index c391e612b83b..3356af3a7f61 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -542,6 +542,8 @@ static const struct usb_device_id quirks_table[] = {
/* Realtek 8852BE Bluetooth devices */
{ USB_DEVICE(0x0cb8, 0xc559), .driver_info = BTUSB_REALTEK |
BTUSB_WIDEBAND_SPEECH },
+ { USB_DEVICE(0x0bda, 0x4853), .driver_info = BTUSB_REALTEK |
+ BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x0bda, 0x887b), .driver_info = BTUSB_REALTEK |
BTUSB_WIDEBAND_SPEECH },
{ USB_DEVICE(0x0bda, 0xb85b), .driver_info = BTUSB_REALTEK |
--
2.43.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
* RE: [RESEND.,v2] Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x0bda:0x4853
2024-03-29 2:34 [RESEND. PATCH v2] Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x0bda:0x4853 WangYuli
@ 2024-03-29 3:32 ` bluez.test.bot
2024-04-11 14:39 ` [RESEND. PATCH v2] " patchwork-bot+bluetooth
1 sibling, 0 replies; 3+ messages in thread
From: bluez.test.bot @ 2024-03-29 3:32 UTC (permalink / raw)
To: linux-bluetooth, wangyuli
[-- Attachment #1: Type: text/plain, Size: 2578 bytes --]
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=839622
---Test result---
Test Summary:
CheckPatch PASS 0.67 seconds
GitLint PASS 0.34 seconds
SubjectPrefix PASS 0.13 seconds
BuildKernel PASS 30.11 seconds
CheckAllWarning PASS 32.80 seconds
CheckSparse PASS 38.17 seconds
CheckSmatch FAIL 34.97 seconds
BuildKernel32 PASS 28.99 seconds
TestRunnerSetup PASS 524.06 seconds
TestRunner_l2cap-tester PASS 19.97 seconds
TestRunner_iso-tester FAIL 30.47 seconds
TestRunner_bnep-tester PASS 4.76 seconds
TestRunner_mgmt-tester PASS 113.30 seconds
TestRunner_rfcomm-tester PASS 7.31 seconds
TestRunner_sco-tester PASS 14.99 seconds
TestRunner_ioctl-tester PASS 7.79 seconds
TestRunner_mesh-tester PASS 5.94 seconds
TestRunner_smp-tester PASS 6.85 seconds
TestRunner_userchan-tester PASS 4.92 seconds
IncrementalBuild PASS 27.93 seconds
Details
##############################
Test: CheckSmatch - FAIL
Desc: Run smatch tool with source
Output:
Segmentation fault (core dumped)
make[4]: *** [scripts/Makefile.build:244: net/bluetooth/hci_core.o] Error 139
make[4]: *** Deleting file 'net/bluetooth/hci_core.o'
make[3]: *** [scripts/Makefile.build:485: net/bluetooth] Error 2
make[2]: *** [scripts/Makefile.build:485: net] Error 2
make[2]: *** Waiting for unfinished jobs....
Segmentation fault (core dumped)
make[4]: *** [scripts/Makefile.build:244: drivers/bluetooth/bcm203x.o] Error 139
make[4]: *** Deleting file 'drivers/bluetooth/bcm203x.o'
make[4]: *** Waiting for unfinished jobs....
make[3]: *** [scripts/Makefile.build:485: drivers/bluetooth] Error 2
make[2]: *** [scripts/Makefile.build:485: drivers] Error 2
make[1]: *** [/github/workspace/src/src/Makefile:1919: .] Error 2
make: *** [Makefile:240: __sub-make] Error 2
##############################
Test: TestRunner_iso-tester - FAIL
Desc: Run iso-tester with test-runner
Output:
Total: 117, Passed: 116 (99.1%), Failed: 1, Not Run: 0
Failed Test Cases
ISO Connect Suspend - Success Failed 4.181 seconds
---
Regards,
Linux Bluetooth
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [RESEND. PATCH v2] Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x0bda:0x4853
2024-03-29 2:34 [RESEND. PATCH v2] Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x0bda:0x4853 WangYuli
2024-03-29 3:32 ` [RESEND.,v2] " bluez.test.bot
@ 2024-04-11 14:39 ` patchwork-bot+bluetooth
1 sibling, 0 replies; 3+ messages in thread
From: patchwork-bot+bluetooth @ 2024-04-11 14:39 UTC (permalink / raw)
To: WangYuli
Cc: Larry.Finger, marcel, luiz.dentz, gustavo, johan.hedberg,
guanwentao, linux-bluetooth, linux-kernel, stable
Hello:
This patch was applied to bluetooth/bluetooth-next.git (master)
by Luiz Augusto von Dentz <luiz.von.dentz@intel.com>:
On Fri, 29 Mar 2024 10:34:39 +0800 you wrote:
> Add the support ID(0x0bda, 0x4853) to usb_device_id table for
> Realtek RTL8852BE.
>
> Without this change the device utilizes an obsolete version of
> the firmware that is encoded in it rather than the updated Realtek
> firmware and config files from the firmware directory. The latter
> files implement many new features.
>
> [...]
Here is the summary with links:
- [RESEND.,v2] Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x0bda:0x4853
https://git.kernel.org/bluetooth/bluetooth-next/c/cf396a443d37
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2024-04-11 14:39 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-03-29 2:34 [RESEND. PATCH v2] Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x0bda:0x4853 WangYuli
2024-03-29 3:32 ` [RESEND.,v2] " bluez.test.bot
2024-04-11 14:39 ` [RESEND. PATCH v2] " patchwork-bot+bluetooth
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.