* [PATCH] trivial: Fix booot occurences
@ 2020-06-05 9:45 ` Michal Simek
2020-06-09 11:44 ` Jaehoon Chung
2020-06-15 19:55 ` Tom Rini
0 siblings, 2 replies; 3+ messages in thread
From: Michal Simek @ 2020-06-05 9:45 UTC (permalink / raw)
To: u-boot
s/booot/boot/g
The first ase is booot instead of boot and second u-booot instead of
u-boot.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
board/freescale/p1010rdb/README.P1010RDB-PA | 2 +-
cmd/mmc.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/freescale/p1010rdb/README.P1010RDB-PA b/board/freescale/p1010rdb/README.P1010RDB-PA
index 46c61237c727..0cb950d845e7 100644
--- a/board/freescale/p1010rdb/README.P1010RDB-PA
+++ b/board/freescale/p1010rdb/README.P1010RDB-PA
@@ -88,7 +88,7 @@ Note: 1 stands for 'on', 0 stands for 'off'
Setting of hwconfig
===================
If FlexCAN or TDM is needed, please set "fsl_p1010mux:tdm_can=can" or
-"fsl_p1010mux:tdm_can=tdm" explicitly in u-booot prompt as below for example:
+"fsl_p1010mux:tdm_can=tdm" explicitly in u-boot prompt as below for example:
setenv hwconfig "fsl_p1010mux:tdm_can=tdm;usb1:dr_mode=host,phy_type=utmi"
By default, don't set fsl_p1010mux:tdm_can, in this case, spi chip selection
is set to spi-flash instead of to SLIC/TDM/DAC and tdm_can_sel is set to TDM
diff --git a/cmd/mmc.c b/cmd/mmc.c
index 97e5d91859c9..1c252e050282 100644
--- a/cmd/mmc.c
+++ b/cmd/mmc.c
@@ -1004,7 +1004,7 @@ U_BOOT_CMD(
"mmc part - lists available partition on current mmc device\n"
"mmc dev [dev] [part] - show or set current mmc device [partition]\n"
"mmc list - lists available devices\n"
- "mmc wp - power on write protect booot partitions\n"
+ "mmc wp - power on write protect boot partitions\n"
#if CONFIG_IS_ENABLED(MMC_HW_PARTITIONING)
"mmc hwpartition [args...] - does hardware partitioning\n"
" arguments (sizes in 512-byte blocks):\n"
--
2.27.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH] trivial: Fix booot occurences
2020-06-05 9:45 ` [PATCH] trivial: Fix booot occurences Michal Simek
@ 2020-06-09 11:44 ` Jaehoon Chung
2020-06-15 19:55 ` Tom Rini
1 sibling, 0 replies; 3+ messages in thread
From: Jaehoon Chung @ 2020-06-09 11:44 UTC (permalink / raw)
To: u-boot
On 6/5/20 6:45 PM, Michal Simek wrote:
> s/booot/boot/g
>
> The first ase is booot instead of boot and second u-booot instead of
> u-boot.
>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
> ---
>
> board/freescale/p1010rdb/README.P1010RDB-PA | 2 +-
> cmd/mmc.c | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/board/freescale/p1010rdb/README.P1010RDB-PA b/board/freescale/p1010rdb/README.P1010RDB-PA
> index 46c61237c727..0cb950d845e7 100644
> --- a/board/freescale/p1010rdb/README.P1010RDB-PA
> +++ b/board/freescale/p1010rdb/README.P1010RDB-PA
> @@ -88,7 +88,7 @@ Note: 1 stands for 'on', 0 stands for 'off'
> Setting of hwconfig
> ===================
> If FlexCAN or TDM is needed, please set "fsl_p1010mux:tdm_can=can" or
> -"fsl_p1010mux:tdm_can=tdm" explicitly in u-booot prompt as below for example:
> +"fsl_p1010mux:tdm_can=tdm" explicitly in u-boot prompt as below for example:
> setenv hwconfig "fsl_p1010mux:tdm_can=tdm;usb1:dr_mode=host,phy_type=utmi"
> By default, don't set fsl_p1010mux:tdm_can, in this case, spi chip selection
> is set to spi-flash instead of to SLIC/TDM/DAC and tdm_can_sel is set to TDM
> diff --git a/cmd/mmc.c b/cmd/mmc.c
> index 97e5d91859c9..1c252e050282 100644
> --- a/cmd/mmc.c
> +++ b/cmd/mmc.c
> @@ -1004,7 +1004,7 @@ U_BOOT_CMD(
> "mmc part - lists available partition on current mmc device\n"
> "mmc dev [dev] [part] - show or set current mmc device [partition]\n"
> "mmc list - lists available devices\n"
> - "mmc wp - power on write protect booot partitions\n"
> + "mmc wp - power on write protect boot partitions\n"
> #if CONFIG_IS_ENABLED(MMC_HW_PARTITIONING)
> "mmc hwpartition [args...] - does hardware partitioning\n"
> " arguments (sizes in 512-byte blocks):\n"
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH] trivial: Fix booot occurences
2020-06-05 9:45 ` [PATCH] trivial: Fix booot occurences Michal Simek
2020-06-09 11:44 ` Jaehoon Chung
@ 2020-06-15 19:55 ` Tom Rini
1 sibling, 0 replies; 3+ messages in thread
From: Tom Rini @ 2020-06-15 19:55 UTC (permalink / raw)
To: u-boot
On Fri, Jun 05, 2020 at 11:45:12AM +0200, Michal Simek wrote:
> s/booot/boot/g
>
> The first ase is booot instead of boot and second u-booot instead of
> u-boot.
>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200615/10f618ed/attachment.sig>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-06-15 19:55 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <CGME20200605094519epcas1p209ba5c77090e9557c916aeb14054d3c7@epcas1p2.samsung.com>
2020-06-05 9:45 ` [PATCH] trivial: Fix booot occurences Michal Simek
2020-06-09 11:44 ` Jaehoon Chung
2020-06-15 19:55 ` Tom Rini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.