From: "Iremonger, Bernard" <bernard.iremonger@intel.com>
To: "Qiu, Michael" <michael.qiu@intel.com>, "dev@dpdk.org" <dev@dpdk.org>
Cc: "He, Shaopeng" <shaopeng.he@intel.com>
Subject: Re: [PATCH 1/2 v4] fm10k: Free queues when close port
Date: Fri, 26 Jun 2015 11:02:36 +0000 [thread overview]
Message-ID: <8CEF83825BEC744B83065625E567D7C204A422AD@IRSMSX108.ger.corp.intel.com> (raw)
In-Reply-To: <1435307390-20140-2-git-send-email-michael.qiu@intel.com>
> -----Original Message-----
> From: Qiu, Michael
> Sent: Friday, June 26, 2015 9:30 AM
> To: dev@dpdk.org
> Cc: Chen, Jing D; He, Shaopeng; Iremonger, Bernard; Qiu, Michael
> Subject: [PATCH 1/2 v4] fm10k: Free queues when close port
>
> When close a port, lots of memory should be released, such as software
> rings, queues, etc.
>
> Signed-off-by: Michael Qiu <michael.qiu@intel.com>
> ---
Hi Michael,
There are 2 comments inline
> drivers/net/fm10k/fm10k_ethdev.c | 37
> +++++++++++++++++++++++++++++++++----
> 1 file changed, 33 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/fm10k/fm10k_ethdev.c
> b/drivers/net/fm10k/fm10k_ethdev.c
> index 406c350..eba7228 100644
> --- a/drivers/net/fm10k/fm10k_ethdev.c
> +++ b/drivers/net/fm10k/fm10k_ethdev.c
> @@ -65,6 +65,8 @@ static void
> fm10k_MAC_filter_set(struct rte_eth_dev *dev, const u8 *mac, bool add);
> static void fm10k_MACVLAN_remove_all(struct rte_eth_dev *dev);
> +static void fm10k_tx_queue_release(void *queue); static void
> +fm10k_rx_queue_release(void *queue);
>
> static void
> fm10k_mbx_initlock(struct fm10k_hw *hw) @@ -809,11 +811,37 @@
> fm10k_dev_stop(struct rte_eth_dev *dev)
>
> PMD_INIT_FUNC_TRACE();
>
> - for (i = 0; i < dev->data->nb_tx_queues; i++)
> - fm10k_dev_tx_queue_stop(dev, i);
> + if (dev->data->tx_queues)
> + for (i = 0; i < dev->data->nb_tx_queues; i++)
> + fm10k_dev_tx_queue_stop(dev, i);
>
> - for (i = 0; i < dev->data->nb_rx_queues; i++)
> - fm10k_dev_rx_queue_stop(dev, i);
> + if (dev->data->rx_queues)
> + for (i = 0; i < dev->data->nb_rx_queues; i++)
> + fm10k_dev_rx_queue_stop(dev, i);
> +}
> +
> +static void
> +fm10k_dev_queue_release(struct rte_eth_dev *dev) {
> + int i;
> +
> + PMD_INIT_FUNC_TRACE();
> +
> + if (dev->data->tx_queues) {
> + for (i = 0; i < dev->data->nb_tx_queues; i++)
> + fm10k_tx_queue_release(dev->data-
> >tx_queues[i]);
> + rte_free(dev->data->tx_queues);
> + dev->data->tx_queues = NULL;
The memory for dev->data->tx_queues is not allocated in the fm10k PMD,
so it should probably not be released here.
I have submitted a patch today for rte_eth_dev.c to do this.
/dev/patchwork/patch/5829/
> + dev->data->nb_tx_queues = 0;
> + }
> +
> + if (dev->data->rx_queues) {
> + for (i = 0; i < dev->data->nb_rx_queues; i++)
> + fm10k_rx_queue_release(dev->data-
> >rx_queues[i]);
> + rte_free(dev->data->rx_queues);
> + dev->data->rx_queues = NULL;
The memory for dev->data->rx_queues is not allocated in the fm10k PMD,
so it should probably not be released here.
I have submitted a patch today for rte_eth_dev.c to do this.
/dev/patchwork/patch/5829/
Regards,
Bernard.
> + dev->data->nb_rx_queues = 0;
> + }
> }
>
> static void
> @@ -828,6 +856,7 @@ fm10k_dev_close(struct rte_eth_dev *dev)
> /* Stop mailbox service first */
> fm10k_close_mbx_service(hw);
> fm10k_dev_stop(dev);
> + fm10k_dev_queue_release(dev);
> fm10k_stop_hw(hw);
> }
>
> --
> 1.9.3
next prev parent reply other threads:[~2015-06-26 11:02 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-31 14:37 [RFC PATCH] librte_pmd_fm10k: Add hotplug support for fm10k Michael Qiu
2015-06-02 8:26 ` Iremonger, Bernard
2015-06-02 9:36 ` Qiu, Michael
2015-06-10 12:21 ` [PATCH 0/2 v2] Enable " Michael Qiu
2015-06-10 12:21 ` [PATCH 1/2] fm10k: Free queues when close port Michael Qiu
2015-06-12 7:27 ` Chen, Jing D
2015-06-17 7:59 ` [PATCH 1/2 v2] " Michael Qiu
2015-06-18 7:32 ` Chen, Jing D
2015-06-18 16:29 ` Iremonger, Bernard
2015-06-19 7:36 ` Qiu, Michael
2015-06-17 8:44 ` [PATCH 2/2 v2] fm10k: Add hotplug support for fm10k Michael Qiu
2015-06-18 16:42 ` Iremonger, Bernard
2015-06-19 7:41 ` Qiu, Michael
2015-06-10 12:21 ` [PATCH 2/2] " Michael Qiu
2015-06-10 12:24 ` [PATCH 0/2 v2] Enable " Qiu, Michael
2015-06-19 8:31 ` [PATCH 0/2 v3] " Michael Qiu
2015-06-19 8:31 ` [PATCH 1/2 v3] fm10k: Free queues when close port Michael Qiu
2015-06-19 8:31 ` [PATCH 2/2 v2] fm10k: Add hotplug support for fm10k Michael Qiu
2015-06-19 8:36 ` Qiu, Michael
2015-06-26 8:29 ` [PATCH 0/2 v4] Enable " Michael Qiu
2015-06-26 8:29 ` [PATCH 1/2 v4] fm10k: Free queues when close port Michael Qiu
2015-06-26 11:02 ` Iremonger, Bernard [this message]
2015-06-29 8:17 ` Qiu, Michael
2015-06-29 8:57 ` Iremonger, Bernard
2015-06-29 9:20 ` Qiu, Michael
2015-06-29 9:53 ` Iremonger, Bernard
2015-06-29 14:58 ` Qiu, Michael
2015-06-29 15:15 ` Qiu, Michael
2015-06-29 11:08 ` Ananyev, Konstantin
2015-06-29 15:14 ` Qiu, Michael
2015-06-26 8:29 ` [PATCH 2/2 v4] fm10k: Add hotplug support for fm10k Michael Qiu
2015-07-14 12:45 ` [PATCH 0/2 v5] Enable " Michael Qiu
2015-07-14 12:45 ` [PATCH 1/2 v5] fm10k: Free queues when close port Michael Qiu
2015-07-14 12:45 ` [PATCH 2/2 v5] fm10k: Add hotplug support for fm10k Michael Qiu
2015-07-19 20:26 ` [PATCH 0/2 v5] Enable " Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8CEF83825BEC744B83065625E567D7C204A422AD@IRSMSX108.ger.corp.intel.com \
--to=bernard.iremonger@intel.com \
--cc=dev@dpdk.org \
--cc=michael.qiu@intel.com \
--cc=shaopeng.he@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.