From: Florian Fainelli <f.fainelli@gmail.com>
To: Mike Rapoport <rppt@kernel.org>
Cc: Roman Gushchin <guro@fb.com>,
Andrew Morton <akpm@linux-foundation.org>,
linux-mm@kvack.org, Kamal Dasu <kdasu.kdev@gmail.com>,
linux-mips@linux-mips.org,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Paul Cercueil <paul@crapouillou.net>,
Serge Semin <Sergey.Semin@baikalelectronics.ru>,
Jiaxun Yang <jiaxun.yang@flygoat.com>,
iamjoonsoo.kim@lge.com, riel@surriel.com,
Michal Hocko <mhocko@kernel.org>,
linux-kernel@vger.kernel.org, kernel-team@fb.com
Subject: Re: [PATCH v2 2/2] memblock: do not start bottom-up allocations with kernel_end
Date: Sun, 28 Feb 2021 10:19:51 -0800 [thread overview]
Message-ID: <8cbafe95-0f8c-a9b7-2dc9-cded846622fd@gmail.com> (raw)
In-Reply-To: <20210228090041.GO1447004@kernel.org>
Hi Mike,
On 2/28/2021 1:00 AM, Mike Rapoport wrote:
> Hi Florian,
>
> On Sat, Feb 27, 2021 at 08:18:47PM -0800, Florian Fainelli wrote:
>>
>> On 12/17/2020 12:12 PM, Roman Gushchin wrote:
>>> With kaslr the kernel image is placed at a random place, so starting
>>> the bottom-up allocation with the kernel_end can result in an
>>> allocation failure and a warning like this one:
>>>
>>> [ 0.002920] hugetlb_cma: reserve 2048 MiB, up to 2048 MiB per node
>>> [ 0.002921] ------------[ cut here ]------------
>>> [ 0.002922] memblock: bottom-up allocation failed, memory hotremove may be affected
>>> [ 0.002937] WARNING: CPU: 0 PID: 0 at mm/memblock.c:332 memblock_find_in_range_node+0x178/0x25a
>>> [ 0.002937] Modules linked in:
>>> [ 0.002939] CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.0+ #1169
>>> [ 0.002940] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
>>> [ 0.002942] RIP: 0010:memblock_find_in_range_node+0x178/0x25a
>>> [ 0.002944] Code: e9 6d ff ff ff 48 85 c0 0f 85 da 00 00 00 80 3d 9b 35 df 00 00 75 15 48 c7 c7 c0 75 59 88 c6 05 8b 35 df 00 01 e8 25 8a fa ff <0f> 0b 48 c7 44 24 20 ff ff ff ff 44 89 e6 44 89 ea 48 c7 c1 70 5c
>>> [ 0.002945] RSP: 0000:ffffffff88803d18 EFLAGS: 00010086 ORIG_RAX: 0000000000000000
>>> [ 0.002947] RAX: 0000000000000000 RBX: 0000000240000000 RCX: 00000000ffffdfff
>>> [ 0.002948] RDX: 00000000ffffdfff RSI: 00000000ffffffea RDI: 0000000000000046
>>> [ 0.002948] RBP: 0000000100000000 R08: ffffffff88922788 R09: 0000000000009ffb
>>> [ 0.002949] R10: 00000000ffffe000 R11: 3fffffffffffffff R12: 0000000000000000
>>> [ 0.002950] R13: 0000000000000000 R14: 0000000080000000 R15: 00000001fb42c000
>>> [ 0.002952] FS: 0000000000000000(0000) GS:ffffffff88f71000(0000) knlGS:0000000000000000
>>> [ 0.002953] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>>> [ 0.002954] CR2: ffffa080fb401000 CR3: 00000001fa80a000 CR4: 00000000000406b0
>>> [ 0.002956] Call Trace:
>>> [ 0.002961] ? memblock_alloc_range_nid+0x8d/0x11e
>>> [ 0.002963] ? cma_declare_contiguous_nid+0x2c4/0x38c
>>> [ 0.002964] ? hugetlb_cma_reserve+0xdc/0x128
>>> [ 0.002968] ? flush_tlb_one_kernel+0xc/0x20
>>> [ 0.002969] ? native_set_fixmap+0x82/0xd0
>>> [ 0.002971] ? flat_get_apic_id+0x5/0x10
>>> [ 0.002973] ? register_lapic_address+0x8e/0x97
>>> [ 0.002975] ? setup_arch+0x8a5/0xc3f
>>> [ 0.002978] ? start_kernel+0x66/0x547
>>> [ 0.002980] ? load_ucode_bsp+0x4c/0xcd
>>> [ 0.002982] ? secondary_startup_64_no_verify+0xb0/0xbb
>>> [ 0.002986] random: get_random_bytes called from __warn+0xab/0x110 with crng_init=0
>>> [ 0.002988] ---[ end trace f151227d0b39be70 ]---
>>>
>>> At the same time, the kernel image is protected with memblock_reserve(),
>>> so we can just start searching at PAGE_SIZE. In this case the
>>> bottom-up allocation has the same chances to success as a top-down
>>> allocation, so there is no reason to fallback in the case of a
>>> failure. All together it simplifies the logic.
>>>
>>> Signed-off-by: Roman Gushchin <guro@fb.com>
>>
>> Hi Roman, Thomas and other linux-mips folks,
>>
>> Kamal and myself have been unable to boot v5.11 on MIPS since this
>> commit, reverting it makes our MIPS platforms boot successfully. We do
>> not see a warning like this one in the commit message, instead what
>> happens appear to be a corrupted Device Tree which prevents the parsing
>> of the "rdb" node and leading to the interrupt controllers not being
>> registered, and the system eventually not booting.
>>
>> The Device Tree is built-into the kernel image and resides at
>> arch/mips/boot/dts/brcm/bcm97435svmb.dts.
>>
>> Do you have any idea what could be wrong with MIPS specifically here?
>
> Apparently there is a memblock allocation in one of the functions called
> from arch_mem_init() between plat_mem_setup() and
> early_init_fdt_reserve_self().
>
> If you have serial available that early we can try to track it down with
> forcing memblock_debug in mm/memblock.c to 1:
>
> diff --git a/mm/memblock.c b/mm/memblock.c
> index afaefa8fc6ab..83034245f8d5 100644
> --- a/mm/memblock.c
> +++ b/mm/memblock.c
> @@ -151,7 +151,7 @@ static __refdata struct memblock_type *memblock_memory = &memblock.memory;
> pr_info(fmt, ##__VA_ARGS__); \
> } while (0)
>
> -static int memblock_debug __initdata_memblock;
> +static int memblock_debug __initdata_memblock = 1;
> static bool system_has_some_mirror __initdata_memblock = false;
> static int memblock_can_resize __initdata_memblock;
> static int memblock_memory_in_slab __initdata_memblock = 0;
>
>
> Regardless, I think that moving DT self reservation just after
> plat_mem_setup() is safe and it'll make things more robust.
>
> diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
> index 279be0153f8b..f476b99a7bcd 100644
> --- a/arch/mips/kernel/setup.c
> +++ b/arch/mips/kernel/setup.c
> @@ -623,6 +623,8 @@ static void __init arch_mem_init(char **cmdline_p)
> {
> /* call board setup routine */
> plat_mem_setup();
> + early_init_fdt_reserve_self();
> + early_init_fdt_scan_reserved_mem();
> memblock_set_bottom_up(true);
>
> bootcmdline_init();
> @@ -636,9 +638,6 @@ static void __init arch_mem_init(char **cmdline_p)
>
> check_kernel_sections_mem();
>
> - early_init_fdt_reserve_self();
> - early_init_fdt_scan_reserved_mem();
> -
> #ifndef CONFIG_NUMA
> memblock_set_node(0, PHYS_ADDR_MAX, &memblock.memory, 0);
> #endif
Thanks a lot for taking a look! The current/broken memblock=debug output
looks like this:
[ 0.000000] Linux version 5.11.0-g5695e5161974 (florian@localhost)
(mipsel-linux-gcc (GCC) 8.3.0, GNU ld (GNU Binutils) 2.32) #84 SMP Sun
Feb 28 10:01:50 PST 2021
[ 0.000000] CPU0 revision is: 00025b00 (Broadcom BMIPS5200)
[ 0.000000] FPU revision is: 00130001
[ 0.000000] memblock_add: [0x00000000-0x0fffffff]
early_init_dt_scan_memory+0x160/0x1e0
[ 0.000000] memblock_add: [0x20000000-0x4fffffff]
early_init_dt_scan_memory+0x160/0x1e0
[ 0.000000] memblock_add: [0x90000000-0xcfffffff]
early_init_dt_scan_memory+0x160/0x1e0
[ 0.000000] MIPS: machine is Broadcom BCM97435SVMB
[ 0.000000] earlycon: ns16550a0 at MMIO32 0x10406b00 (options '')
[ 0.000000] printk: bootconsole [ns16550a0] enabled
[ 0.000000] memblock_reserve: [0x00aa7600-0x00aaa0a0]
setup_arch+0x128/0x69c
[ 0.000000] memblock_reserve: [0x00010000-0x018313cf]
setup_arch+0x1f8/0x69c
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] memblock_alloc_try_nid: 10913 bytes align=0x40 nid=-1
from=0x00000000 max_addr=0x00000000
early_init_dt_alloc_memory_arch+0x40/0x84
[ 0.000000] memblock_reserve: [0x00001000-0x00003aa0]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 32680 bytes align=0x4 nid=-1
from=0x00000000 max_addr=0x00000000
early_init_dt_alloc_memory_arch+0x40/0x84
[ 0.000000] memblock_reserve: [0x00003aa4-0x0000ba4b]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 25 bytes align=0x4 nid=-1
from=0x00000000 max_addr=0x00000000
early_init_dt_alloc_memory_arch+0x40/0x84
[ 0.000000] memblock_reserve: [0x0000ba4c-0x0000ba64]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_reserve: [0x0096a000-0x00969fff]
setup_arch+0x3fc/0x69c
[ 0.000000] memblock_alloc_try_nid: 32 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 setup_arch+0x4e0/0x69c
[ 0.000000] memblock_reserve: [0x0000ba80-0x0000ba9f]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 32 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 setup_arch+0x4e0/0x69c
[ 0.000000] memblock_reserve: [0x0000bb00-0x0000bb1f]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 32 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 setup_arch+0x4e0/0x69c
[ 0.000000] memblock_reserve: [0x0000bb80-0x0000bb9f]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 64
bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, no aliases,
linesize 32 bytes
[ 0.000000] MIPS secondary cache 512kB, 8-way, linesize 128 bytes.
[ 0.000000] memblock_alloc_try_nid: 4096 bytes align=0x1000 nid=-1
from=0x00000000 max_addr=0xffffffff fixrange_init+0x90/0xf4
[ 0.000000] memblock_reserve: [0x0000c000-0x0000cfff]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 4096 bytes align=0x1000 nid=-1
from=0x00000000 max_addr=0xffffffff fixrange_init+0x90/0xf4
[ 0.000000] memblock_reserve: [0x0000d000-0x0000dfff]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 4096 bytes align=0x1000 nid=-1
from=0x00000000 max_addr=0xffffffff fixrange_init+0x90/0xf4
[ 0.000000] memblock_reserve: [0x0000e000-0x0000efff]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] HighMem [mem 0x0000000010000000-0x00000000cfffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] node 0: [mem 0x0000000020000000-0x000000004fffffff]
[ 0.000000] node 0: [mem 0x0000000090000000-0x00000000cfffffff]
[ 0.000000] Initmem setup node 0 [mem
0x0000000000000000-0x00000000cfffffff]
[ 0.000000] memblock_alloc_try_nid: 27262976 bytes align=0x80 nid=0
from=0x00000000 max_addr=0x00000000
alloc_node_mem_map.constprop.135+0x6c/0xc8
[ 0.000000] memblock_reserve: [0x01831400-0x032313ff]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 32 bytes align=0x80 nid=0
from=0x00000000 max_addr=0x00000000 setup_usemap+0x64/0x98
[ 0.000000] memblock_reserve: [0x0000bc00-0x0000bc1f]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 384 bytes align=0x80 nid=0
from=0x00000000 max_addr=0x00000000 setup_usemap+0x64/0x98
[ 0.000000] memblock_reserve: [0x0000bc80-0x0000bdff]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] MEMBLOCK configuration:
[ 0.000000] memory size = 0x80000000 reserved size = 0x0322f032
[ 0.000000] memory.cnt = 0x3
[ 0.000000] memory[0x0] [0x00000000-0x0fffffff], 0x10000000
bytes flags: 0x0
[ 0.000000] memory[0x1] [0x20000000-0x4fffffff], 0x30000000
bytes flags: 0x0
[ 0.000000] memory[0x2] [0x90000000-0xcfffffff], 0x40000000
bytes flags: 0x0
[ 0.000000] reserved.cnt = 0xa
[ 0.000000] reserved[0x0] [0x00001000-0x00003aa0], 0x00002aa1
bytes flags: 0x0
[ 0.000000] reserved[0x1] [0x00003aa4-0x0000ba64], 0x00007fc1
bytes flags: 0x0
[ 0.000000] reserved[0x2] [0x0000ba80-0x0000ba9f], 0x00000020
bytes flags: 0x0
[ 0.000000] reserved[0x3] [0x0000bb00-0x0000bb1f], 0x00000020
bytes flags: 0x0
[ 0.000000] reserved[0x4] [0x0000bb80-0x0000bb9f], 0x00000020
bytes flags: 0x0
[ 0.000000] reserved[0x5] [0x0000bc00-0x0000bc1f], 0x00000020
bytes flags: 0x0
[ 0.000000] reserved[0x6] [0x0000bc80-0x0000bdff], 0x00000180
bytes flags: 0x0
[ 0.000000] reserved[0x7] [0x0000c000-0x0000efff], 0x00003000
bytes flags: 0x0
[ 0.000000] reserved[0x8] [0x00010000-0x018313cf], 0x018213d0
bytes flags: 0x0
[ 0.000000] reserved[0x9] [0x01831400-0x032313ff], 0x01a00000
bytes flags: 0x0
[ 0.000000] memblock_alloc_try_nid: 30 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 start_kernel+0x12c/0x654
[ 0.000000] memblock_reserve: [0x0000be00-0x0000be1d]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 30 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 start_kernel+0x150/0x654
[ 0.000000] memblock_reserve: [0x0000be80-0x0000be9d]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 4096 bytes align=0x1000 nid=-1
from=0x00000000 max_addr=0x00000000 pcpu_embed_first_chunk+0x3b0/0x884
[ 0.000000] memblock_reserve: [0x0000f000-0x0000ffff]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 4096 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 pcpu_embed_first_chunk+0x5a4/0x884
[ 0.000000] memblock_reserve: [0x03231400-0x032323ff]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 294912 bytes align=0x1000 nid=-1
from=0x01000000 max_addr=0x00000000 pcpu_dfl_fc_alloc+0x24/0x30
[ 0.000000] memblock_reserve: [0x03233000-0x0327afff]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_free: [0x03245000-0x03244fff]
pcpu_embed_first_chunk+0x7a0/0x884
[ 0.000000] memblock_free: [0x03257000-0x03256fff]
pcpu_embed_first_chunk+0x7a0/0x884
[ 0.000000] memblock_free: [0x03269000-0x03268fff]
pcpu_embed_first_chunk+0x7a0/0x884
[ 0.000000] memblock_free: [0x0327b000-0x0327afff]
pcpu_embed_first_chunk+0x7a0/0x884
[ 0.000000] percpu: Embedded 18 pages/cpu s50704 r0 d23024 u73728
[ 0.000000] memblock_alloc_try_nid: 4 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 pcpu_setup_first_chunk+0x178/0x6ec
[ 0.000000] memblock_reserve: [0x0000bf00-0x0000bf03]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 4 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 pcpu_setup_first_chunk+0x1a8/0x6ec
[ 0.000000] memblock_reserve: [0x0000bf80-0x0000bf83]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 16 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 pcpu_setup_first_chunk+0x1dc/0x6ec
[ 0.000000] memblock_reserve: [0x03232400-0x0323240f]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 16 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 pcpu_setup_first_chunk+0x20c/0x6ec
[ 0.000000] memblock_reserve: [0x03232480-0x0323248f]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 128 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 pcpu_setup_first_chunk+0x558/0x6ec
[ 0.000000] memblock_reserve: [0x03232500-0x0323257f]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 92 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 pcpu_alloc_first_chunk+0x8c/0x294
[ 0.000000] memblock_reserve: [0x03232580-0x032325db]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 768 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 pcpu_alloc_first_chunk+0xe0/0x294
[ 0.000000] memblock_reserve: [0x03232600-0x032328ff]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 772 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 pcpu_alloc_first_chunk+0x124/0x294
[ 0.000000] memblock_reserve: [0x03232900-0x03232c03]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 192 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 pcpu_alloc_first_chunk+0x158/0x294
[ 0.000000] memblock_reserve: [0x03232c80-0x03232d3f]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_free: [0x0000f000-0x0000ffff]
pcpu_embed_first_chunk+0x838/0x884
[ 0.000000] memblock_free: [0x03231400-0x032323ff]
pcpu_embed_first_chunk+0x850/0x884
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 523776
[ 0.000000] Kernel command line: console=ttyS0,115200 earlycon
[ 0.000000] memblock_alloc_try_nid: 131072 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 alloc_large_system_hash+0x1f8/0x33c
[ 0.000000] memblock_reserve: [0x0327b000-0x0329afff]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072
bytes, linear)
[ 0.000000] memblock_alloc_try_nid: 65536 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 alloc_large_system_hash+0x1f8/0x33c
[ 0.000000] memblock_reserve: [0x0329b000-0x032aafff]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536
bytes, linear)
[ 0.000000] memblock_reserve: [0x00000000-0x000003ff]
trap_init+0x70/0x4e8
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 2045268K/2097152K available (8226K kernel code,
1070K rwdata, 1336K rodata, 13808K init, 260K bss, 51884K reserved, 0K
cma-reserved, 1835008K highmem)
[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay
is 25 jiffies.
[ 0.000000] NR_IRQS: 256
[ 0.000000] OF: Bad cell count for /rdb
[ 0.000000] irq_bcm7038_l1: failed to remap intc L1 registers
[ 0.000000] OF: of_irq_init: children remain, but no parents
[ 0.000000] random: get_random_bytes called from
start_kernel+0x444/0x654 with crng_init=0
[ 0.000000] sched_clock: 32 bits at 250 Hz, resolution 4000000ns,
wraps every 8589934590000000ns
and with your patch applied which unfortunately did not work we have the
following:
[ 0.000000] Linux version 5.11.0-g5695e5161974 (florian@localhost)
(mipsel-linux-gcc (GCC) 8.3.0, GNU ld (GNU Binutils) 2.32) #86 SMP Sun
Feb 28 10:04:54 PST 2021
[ 0.000000] CPU0 revision is: 00025b00 (Broadcom BMIPS5200)
[ 0.000000] FPU revision is: 00130001
[ 0.000000] memblock_add: [0x00000000-0x0fffffff]
early_init_dt_scan_memory+0x160/0x1e0
[ 0.000000] memblock_add: [0x20000000-0x4fffffff]
early_init_dt_scan_memory+0x160/0x1e0
[ 0.000000] memblock_add: [0x90000000-0xcfffffff]
early_init_dt_scan_memory+0x160/0x1e0
[ 0.000000] MIPS: machine is Broadcom BCM97435SVMB
[ 0.000000] memblock_reserve: [0x00aa7600-0x00aaa0a0]
setup_arch+0x60/0x6a4
[ 0.000000] earlycon: ns16550a0 at MMIO32 0x10406b00 (options '')
[ 0.000000] printk: bootconsole [ns16550a0] enabled
[ 0.000000] memblock_reserve: [0x00010000-0x018313cf]
setup_arch+0x200/0x6a4
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] memblock_alloc_try_nid: 10913 bytes align=0x40 nid=-1
from=0x00000000 max_addr=0x00000000
early_init_dt_alloc_memory_arch+0x40/0x84
[ 0.000000] memblock_reserve: [0x00001000-0x00003aa0]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 32680 bytes align=0x4 nid=-1
from=0x00000000 max_addr=0x00000000
early_init_dt_alloc_memory_arch+0x40/0x84
[ 0.000000] memblock_reserve: [0x00003aa4-0x0000ba4b]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 25 bytes align=0x4 nid=-1
from=0x00000000 max_addr=0x00000000
early_init_dt_alloc_memory_arch+0x40/0x84
[ 0.000000] memblock_reserve: [0x0000ba4c-0x0000ba64]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_reserve: [0x0096a000-0x00969fff]
setup_arch+0x404/0x6a4
[ 0.000000] memblock_alloc_try_nid: 32 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 setup_arch+0x4e8/0x6a4
[ 0.000000] memblock_reserve: [0x0000ba80-0x0000ba9f]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 32 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 setup_arch+0x4e8/0x6a4
[ 0.000000] memblock_reserve: [0x0000bb00-0x0000bb1f]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 32 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 setup_arch+0x4e8/0x6a4
[ 0.000000] memblock_reserve: [0x0000bb80-0x0000bb9f]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 64
bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, no aliases,
linesize 32 bytes
[ 0.000000] MIPS secondary cache 512kB, 8-way, linesize 128 bytes.
[ 0.000000] memblock_alloc_try_nid: 4096 bytes align=0x1000 nid=-1
from=0x00000000 max_addr=0xffffffff fixrange_init+0x90/0xf4
[ 0.000000] memblock_reserve: [0x0000c000-0x0000cfff]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 4096 bytes align=0x1000 nid=-1
from=0x00000000 max_addr=0xffffffff fixrange_init+0x90/0xf4
[ 0.000000] memblock_reserve: [0x0000d000-0x0000dfff]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 4096 bytes align=0x1000 nid=-1
from=0x00000000 max_addr=0xffffffff fixrange_init+0x90/0xf4
[ 0.000000] memblock_reserve: [0x0000e000-0x0000efff]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] HighMem [mem 0x0000000010000000-0x00000000cfffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] node 0: [mem 0x0000000020000000-0x000000004fffffff]
[ 0.000000] node 0: [mem 0x0000000090000000-0x00000000cfffffff]
[ 0.000000] Initmem setup node 0 [mem
0x0000000000000000-0x00000000cfffffff]
[ 0.000000] memblock_alloc_try_nid: 27262976 bytes align=0x80 nid=0
from=0x00000000 max_addr=0x00000000
alloc_node_mem_map.constprop.135+0x6c/0xc8
[ 0.000000] memblock_reserve: [0x01831400-0x032313ff]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 32 bytes align=0x80 nid=0
from=0x00000000 max_addr=0x00000000 setup_usemap+0x64/0x98
[ 0.000000] memblock_reserve: [0x0000bc00-0x0000bc1f]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 384 bytes align=0x80 nid=0
from=0x00000000 max_addr=0x00000000 setup_usemap+0x64/0x98
[ 0.000000] memblock_reserve: [0x0000bc80-0x0000bdff]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] MEMBLOCK configuration:
[ 0.000000] memory size = 0x80000000 reserved size = 0x0322f032
[ 0.000000] memory.cnt = 0x3
[ 0.000000] memory[0x0] [0x00000000-0x0fffffff], 0x10000000
bytes flags: 0x0
[ 0.000000] memory[0x1] [0x20000000-0x4fffffff], 0x30000000
bytes flags: 0x0
[ 0.000000] memory[0x2] [0x90000000-0xcfffffff], 0x40000000
bytes flags: 0x0
[ 0.000000] reserved.cnt = 0xa
[ 0.000000] reserved[0x0] [0x00001000-0x00003aa0], 0x00002aa1
bytes flags: 0x0
[ 0.000000] reserved[0x1] [0x00003aa4-0x0000ba64], 0x00007fc1
bytes flags: 0x0
[ 0.000000] reserved[0x2] [0x0000ba80-0x0000ba9f], 0x00000020
bytes flags: 0x0
[ 0.000000] reserved[0x3] [0x0000bb00-0x0000bb1f], 0x00000020
bytes flags: 0x0
[ 0.000000] reserved[0x4] [0x0000bb80-0x0000bb9f], 0x00000020
bytes flags: 0x0
[ 0.000000] reserved[0x5] [0x0000bc00-0x0000bc1f], 0x00000020
bytes flags: 0x0
[ 0.000000] reserved[0x6] [0x0000bc80-0x0000bdff], 0x00000180
bytes flags: 0x0
[ 0.000000] reserved[0x7] [0x0000c000-0x0000efff], 0x00003000
bytes flags: 0x0
[ 0.000000] reserved[0x8] [0x00010000-0x018313cf], 0x018213d0
bytes flags: 0x0
[ 0.000000] reserved[0x9] [0x01831400-0x032313ff], 0x01a00000
bytes flags: 0x0
[ 0.000000] memblock_alloc_try_nid: 30 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 start_kernel+0x12c/0x654
[ 0.000000] memblock_reserve: [0x0000be00-0x0000be1d]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 30 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 start_kernel+0x150/0x654
[ 0.000000] memblock_reserve: [0x0000be80-0x0000be9d]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 4096 bytes align=0x1000 nid=-1
from=0x00000000 max_addr=0x00000000 pcpu_embed_first_chunk+0x3b0/0x884
[ 0.000000] memblock_reserve: [0x0000f000-0x0000ffff]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 4096 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 pcpu_embed_first_chunk+0x5a4/0x884
[ 0.000000] memblock_reserve: [0x03231400-0x032323ff]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 294912 bytes align=0x1000 nid=-1
from=0x01000000 max_addr=0x00000000 pcpu_dfl_fc_alloc+0x24/0x30
[ 0.000000] memblock_reserve: [0x03233000-0x0327afff]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_free: [0x03245000-0x03244fff]
pcpu_embed_first_chunk+0x7a0/0x884
[ 0.000000] memblock_free: [0x03257000-0x03256fff]
pcpu_embed_first_chunk+0x7a0/0x884
[ 0.000000] memblock_free: [0x03269000-0x03268fff]
pcpu_embed_first_chunk+0x7a0/0x884
[ 0.000000] memblock_free: [0x0327b000-0x0327afff]
pcpu_embed_first_chunk+0x7a0/0x884
[ 0.000000] percpu: Embedded 18 pages/cpu s50704 r0 d23024 u73728
[ 0.000000] memblock_alloc_try_nid: 4 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 pcpu_setup_first_chunk+0x178/0x6ec
[ 0.000000] memblock_reserve: [0x0000bf00-0x0000bf03]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 4 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 pcpu_setup_first_chunk+0x1a8/0x6ec
[ 0.000000] memblock_reserve: [0x0000bf80-0x0000bf83]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 16 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 pcpu_setup_first_chunk+0x1dc/0x6ec
[ 0.000000] memblock_reserve: [0x03232400-0x0323240f]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 16 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 pcpu_setup_first_chunk+0x20c/0x6ec
[ 0.000000] memblock_reserve: [0x03232480-0x0323248f]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 128 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 pcpu_setup_first_chunk+0x558/0x6ec
[ 0.000000] memblock_reserve: [0x03232500-0x0323257f]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 92 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 pcpu_alloc_first_chunk+0x8c/0x294
[ 0.000000] memblock_reserve: [0x03232580-0x032325db]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 768 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 pcpu_alloc_first_chunk+0xe0/0x294
[ 0.000000] memblock_reserve: [0x03232600-0x032328ff]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 772 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 pcpu_alloc_first_chunk+0x124/0x294
[ 0.000000] memblock_reserve: [0x03232900-0x03232c03]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 192 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 pcpu_alloc_first_chunk+0x158/0x294
[ 0.000000] memblock_reserve: [0x03232c80-0x03232d3f]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_free: [0x0000f000-0x0000ffff]
pcpu_embed_first_chunk+0x838/0x884
[ 0.000000] memblock_free: [0x03231400-0x032323ff]
pcpu_embed_first_chunk+0x850/0x884
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 523776
[ 0.000000] Kernel command line: console=ttyS0,115200 earlycon
[ 0.000000] memblock_alloc_try_nid: 131072 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 alloc_large_system_hash+0x1f8/0x33c
[ 0.000000] memblock_reserve: [0x0327b000-0x0329afff]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072
bytes, linear)
[ 0.000000] memblock_alloc_try_nid: 65536 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 alloc_large_system_hash+0x1f8/0x33c
[ 0.000000] memblock_reserve: [0x0329b000-0x032aafff]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536
bytes, linear)
[ 0.000000] memblock_reserve: [0x00000000-0x000003ff]
trap_init+0x70/0x4e8
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 2045268K/2097152K available (8226K kernel code,
1070K rwdata, 1336K rodata, 13808K init, 260K bss, 51884K reserved, 0K
cma-reserved, 1835008K highmem)
[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay
is 25 jiffies.
[ 0.000000] NR_IRQS: 256
[ 0.000000] OF: Bad cell count for /rdb
[ 0.000000] irq_bcm7038_l1: failed to remap intc L1 registers
[ 0.000000] OF: of_irq_init: children remain, but no parents
[ 0.000000] random: get_random_bytes called from
start_kernel+0x444/0x654 with crng_init=0
[ 0.000000] sched_clock: 32 bits at 250 Hz, resolution 4000000ns,
wraps every 8589934590000000ns
With only the revert of f787b0b4502cde50c3583432d6cb9bd8306fc242
("memblock: do not start bottom-up allocations with kernel_end") and an
unmodified arch/mips/kernel/setup.c, this boots successfully:
[ 0.000000] Linux version 5.11.0-gf787b0b4502c (florian@locahost)
(mipsel-linux-gcc (GCC) 8.3.0, GNU ld (GNU Binutils) 2.32) #88 SMP Sun
Feb 28 10:13:21 PST 2021
[ 0.000000] CPU0 revision is: 00025b00 (Broadcom BMIPS5200)
[ 0.000000] FPU revision is: 00130001
[ 0.000000] memblock_add: [0x00000000-0x0fffffff]
early_init_dt_scan_memory+0x160/0x1e0
[ 0.000000] memblock_add: [0x20000000-0x4fffffff]
early_init_dt_scan_memory+0x160/0x1e0
[ 0.000000] memblock_add: [0x90000000-0xcfffffff]
early_init_dt_scan_memory+0x160/0x1e0
[ 0.000000] MIPS: machine is Broadcom BCM97435SVMB
[ 0.000000] earlycon: ns16550a0 at MMIO32 0x10406b00 (options '')
[ 0.000000] printk: bootconsole [ns16550a0] enabled
[ 0.000000] memblock_reserve: [0x00aa9600-0x00aac0a0]
setup_arch+0x128/0x69c
[ 0.000000] memblock_reserve: [0x00010000-0x018313cf]
setup_arch+0x1f8/0x69c
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] memblock_alloc_try_nid: 10913 bytes align=0x40 nid=-1
from=0x00000000 max_addr=0x00000000
early_init_dt_alloc_memory_arch+0x40/0x84
[ 0.000000] memblock_reserve: [0x01831400-0x01833ea0]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 32680 bytes align=0x4 nid=-1
from=0x00000000 max_addr=0x00000000
early_init_dt_alloc_memory_arch+0x40/0x84
[ 0.000000] memblock_reserve: [0x01833ea4-0x0183be4b]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 25 bytes align=0x4 nid=-1
from=0x00000000 max_addr=0x00000000
early_init_dt_alloc_memory_arch+0x40/0x84
[ 0.000000] memblock_reserve: [0x018313d0-0x018313e8]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_reserve: [0x0096c000-0x0096bfff]
setup_arch+0x3fc/0x69c
[ 0.000000] memblock_alloc_try_nid: 32 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 setup_arch+0x4e0/0x69c
[ 0.000000] memblock_reserve: [0x0183be80-0x0183be9f]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 32 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 setup_arch+0x4e0/0x69c
[ 0.000000] memblock_reserve: [0x0183bf00-0x0183bf1f]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 32 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 setup_arch+0x4e0/0x69c
[ 0.000000] memblock_reserve: [0x0183bf80-0x0183bf9f]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 64
bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, no aliases,
linesize 32 bytes
[ 0.000000] MIPS secondary cache 512kB, 8-way, linesize 128 bytes.
[ 0.000000] memblock_alloc_try_nid: 4096 bytes align=0x1000 nid=-1
from=0x00000000 max_addr=0xffffffff fixrange_init+0x90/0xf4
[ 0.000000] memblock_reserve: [0x0183c000-0x0183cfff]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 4096 bytes align=0x1000 nid=-1
from=0x00000000 max_addr=0xffffffff fixrange_init+0x90/0xf4
[ 0.000000] memblock_reserve: [0x0183d000-0x0183dfff]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 4096 bytes align=0x1000 nid=-1
from=0x00000000 max_addr=0xffffffff fixrange_init+0x90/0xf4
[ 0.000000] memblock_reserve: [0x0183e000-0x0183efff]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] HighMem [mem 0x0000000010000000-0x00000000cfffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] node 0: [mem 0x0000000020000000-0x000000004fffffff]
[ 0.000000] node 0: [mem 0x0000000090000000-0x00000000cfffffff]
[ 0.000000] Initmem setup node 0 [mem
0x0000000000000000-0x00000000cfffffff]
[ 0.000000] memblock_alloc_try_nid: 27262976 bytes align=0x80 nid=0
from=0x00000000 max_addr=0x00000000
alloc_node_mem_map.constprop.135+0x6c/0xc8
[ 0.000000] memblock_reserve: [0x0183f000-0x0323efff]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 32 bytes align=0x80 nid=0
from=0x00000000 max_addr=0x00000000 setup_usemap+0x64/0x98
[ 0.000000] memblock_reserve: [0x0323f000-0x0323f01f]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 384 bytes align=0x80 nid=0
from=0x00000000 max_addr=0x00000000 setup_usemap+0x64/0x98
[ 0.000000] memblock_reserve: [0x0323f080-0x0323f1ff]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] MEMBLOCK configuration:
[ 0.000000] memory size = 0x80000000 reserved size = 0x0322f032
[ 0.000000] memory.cnt = 0x3
[ 0.000000] memory[0x0] [0x00000000-0x0fffffff], 0x10000000
bytes flags: 0x0
[ 0.000000] memory[0x1] [0x20000000-0x4fffffff], 0x30000000
bytes flags: 0x0
[ 0.000000] memory[0x2] [0x90000000-0xcfffffff], 0x40000000
bytes flags: 0x0
[ 0.000000] reserved.cnt = 0x8
[ 0.000000] reserved[0x0] [0x00010000-0x018313e8], 0x018213e9
bytes flags: 0x0
[ 0.000000] reserved[0x1] [0x01831400-0x01833ea0], 0x00002aa1
bytes flags: 0x0
[ 0.000000] reserved[0x2] [0x01833ea4-0x0183be4b], 0x00007fa8
bytes flags: 0x0
[ 0.000000] reserved[0x3] [0x0183be80-0x0183be9f], 0x00000020
bytes flags: 0x0
[ 0.000000] reserved[0x4] [0x0183bf00-0x0183bf1f], 0x00000020
bytes flags: 0x0
[ 0.000000] reserved[0x5] [0x0183bf80-0x0183bf9f], 0x00000020
bytes flags: 0x0
[ 0.000000] reserved[0x6] [0x0183c000-0x0323f01f], 0x01a03020
bytes flags: 0x0
[ 0.000000] reserved[0x7] [0x0323f080-0x0323f1ff], 0x00000180
bytes flags: 0x0
[ 0.000000] memblock_alloc_try_nid: 30 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 start_kernel+0x12c/0x654
[ 0.000000] memblock_reserve: [0x0323f200-0x0323f21d]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 30 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 start_kernel+0x150/0x654
[ 0.000000] memblock_reserve: [0x0323f280-0x0323f29d]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 4096 bytes align=0x1000 nid=-1
from=0x00000000 max_addr=0x00000000 pcpu_embed_first_chunk+0x3b0/0x884
[ 0.000000] memblock_reserve: [0x03240000-0x03240fff]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 4096 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 pcpu_embed_first_chunk+0x5a4/0x884
[ 0.000000] memblock_reserve: [0x03241000-0x03241fff]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 294912 bytes align=0x1000 nid=-1
from=0x01000000 max_addr=0x00000000 pcpu_dfl_fc_alloc+0x24/0x30
[ 0.000000] memblock_reserve: [0x03242000-0x03289fff]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_free: [0x03254000-0x03253fff]
pcpu_embed_first_chunk+0x7a0/0x884
[ 0.000000] memblock_free: [0x03266000-0x03265fff]
pcpu_embed_first_chunk+0x7a0/0x884
[ 0.000000] memblock_free: [0x03278000-0x03277fff]
pcpu_embed_first_chunk+0x7a0/0x884
[ 0.000000] memblock_free: [0x0328a000-0x03289fff]
pcpu_embed_first_chunk+0x7a0/0x884
[ 0.000000] percpu: Embedded 18 pages/cpu s50704 r0 d23024 u73728
[ 0.000000] memblock_alloc_try_nid: 4 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 pcpu_setup_first_chunk+0x178/0x6ec
[ 0.000000] memblock_reserve: [0x0323f300-0x0323f303]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 4 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 pcpu_setup_first_chunk+0x1a8/0x6ec
[ 0.000000] memblock_reserve: [0x0323f380-0x0323f383]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 16 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 pcpu_setup_first_chunk+0x1dc/0x6ec
[ 0.000000] memblock_reserve: [0x0323f400-0x0323f40f]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 16 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 pcpu_setup_first_chunk+0x20c/0x6ec
[ 0.000000] memblock_reserve: [0x0323f480-0x0323f48f]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 128 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 pcpu_setup_first_chunk+0x558/0x6ec
[ 0.000000] memblock_reserve: [0x0323f500-0x0323f57f]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 92 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 pcpu_alloc_first_chunk+0x8c/0x294
[ 0.000000] memblock_reserve: [0x0323f580-0x0323f5db]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 768 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 pcpu_alloc_first_chunk+0xe0/0x294
[ 0.000000] memblock_reserve: [0x0323f600-0x0323f8ff]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 772 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 pcpu_alloc_first_chunk+0x124/0x294
[ 0.000000] memblock_reserve: [0x0323f900-0x0323fc03]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_alloc_try_nid: 192 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 pcpu_alloc_first_chunk+0x158/0x294
[ 0.000000] memblock_reserve: [0x0323fc80-0x0323fd3f]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] memblock_free: [0x03240000-0x03240fff]
pcpu_embed_first_chunk+0x838/0x884
[ 0.000000] memblock_free: [0x03241000-0x03241fff]
pcpu_embed_first_chunk+0x850/0x884
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 523776
[ 0.000000] Kernel command line: console=ttyS0,115200 earlycon
[ 0.000000] memblock_alloc_try_nid: 131072 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 alloc_large_system_hash+0x1f8/0x33c
[ 0.000000] memblock_reserve: [0x0328a000-0x032a9fff]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072
bytes, linear)
[ 0.000000] memblock_alloc_try_nid: 65536 bytes align=0x80 nid=-1
from=0x00000000 max_addr=0x00000000 alloc_large_system_hash+0x1f8/0x33c
[ 0.000000] memblock_reserve: [0x032aa000-0x032b9fff]
memblock_alloc_range_nid+0xf8/0x198
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536
bytes, linear)
[ 0.000000] memblock_reserve: [0x00000000-0x000003ff]
trap_init+0x70/0x4e8
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 2045272K/2097152K available (8226K kernel code,
1078K rwdata, 1336K rodata, 13800K init, 260K bss, 51880K reserved, 0K
cma-reserved, 1835008K highmem)
[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay
is 25 jiffies.
[ 0.000000] NR_IRQS: 256
[ 0.000000] irq_bcm7038_l1: registered BCM7038 L1 intc
(/rdb/interrupt-controller@41b500, IRQs: 128)
[ 0.000000] irq_brcmstb_l2: registered L2 intc
(/rdb/interrupt-controller@403000, parent irq: 52)
[ 0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc
(/rdb/interrupt-controller@406780, parent IRQ(s): 2)
[ 0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc
(/rdb/interrupt-controller@409480, parent IRQ(s): 3)
[ 0.000000] irq_brcmstb_l2: registered L2 intc
(/rdb/interrupt-controller@408440, parent irq: 54)
[ 0.000000] irq_brcmstb_l2: registered L2 intc
(/rdb/interrupt-controller@41b000, parent irq: 24)
[ 0.000000] irq_brcmstb_l2: registered L2 intc
(/rdb/interrupt-controller@41bd00, parent irq: 25)
[ 0.000000] random: get_random_bytes called from
start_kernel+0x444/0x654 with crng_init=0
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 10882621761 ns
[ 0.000000] sched_clock: 32 bits at 250 Hz, resolution 4000000ns,
wraps every 8589934590000000ns
The DTB is located at this offset within vmlinux:
37084: 80aac0a1 0 OBJECT GLOBAL DEFAULT 10
__dtb_bcm97435svmb_end
48909: 80aa9600 0 OBJECT GLOBAL DEFAULT 10
__dtb_bcm97435svmb_begin
0x8000_0000 maps to physical address 0x0 on these MIPS platforms.
--
Florian
next prev parent reply other threads:[~2021-02-28 18:21 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-17 20:12 [PATCH v2 1/2] mm: cma: allocate cma areas bottom-up Roman Gushchin
2020-12-17 20:12 ` [PATCH v2 2/2] memblock: do not start bottom-up allocations with kernel_end Roman Gushchin
2020-12-19 14:52 ` Wonhyuk Yang
2020-12-19 14:52 ` Wonhyuk Yang
2020-12-19 17:05 ` Roman Gushchin
2020-12-20 6:49 ` Mike Rapoport
2021-01-22 4:37 ` Thiago Jung Bauermann
2021-01-22 4:37 ` Thiago Jung Bauermann
2021-01-24 2:09 ` Andrew Morton
2021-01-24 2:09 ` Andrew Morton
2021-01-24 7:34 ` Mike Rapoport
2021-01-24 7:34 ` Mike Rapoport
2021-01-26 0:30 ` Thiago Jung Bauermann
2021-01-26 0:30 ` Thiago Jung Bauermann
2021-02-08 23:58 ` Thiago Jung Bauermann
2021-02-08 23:58 ` Thiago Jung Bauermann
2021-02-28 4:18 ` Florian Fainelli
2021-02-28 9:00 ` Mike Rapoport
2021-02-28 18:19 ` Florian Fainelli [this message]
2021-02-28 23:08 ` Serge Semin
2021-03-01 3:50 ` Florian Fainelli
2021-03-01 3:50 ` Florian Fainelli
2021-03-01 9:22 ` Serge Semin
2021-03-01 9:22 ` Serge Semin
2021-03-02 4:09 ` Florian Fainelli
2021-03-02 4:09 ` Florian Fainelli
2021-03-02 13:26 ` Serge Semin
2021-03-02 4:19 ` [PATCH] MIPS: BMIPS: Reserve exception base to prevent corruption Florian Fainelli
2021-03-02 8:09 ` Mike Rapoport
2021-03-02 13:54 ` Serge Semin
2021-03-02 19:04 ` Roman Gushchin
2021-03-02 23:54 ` Thomas Bogendoerfer
2021-03-03 1:30 ` Florian Fainelli
2021-03-03 9:41 ` Thomas Bogendoerfer
2021-03-03 17:45 ` Maciej W. Rozycki
2021-03-03 18:15 ` Thomas Bogendoerfer
2021-03-03 21:50 ` Maciej W. Rozycki
2021-03-01 9:45 ` [PATCH v2 2/2] memblock: do not start bottom-up allocations with kernel_end Mike Rapoport
2021-03-01 9:45 ` Mike Rapoport
2021-03-02 3:55 ` Roman Gushchin
2021-03-02 3:55 ` Roman Gushchin
2021-03-02 13:08 ` Serge Semin
2021-03-23 18:19 ` [tip: x86/boot] x86/setup: Consolidate early memory reservations tip-bot2 for Mike Rapoport
2020-12-20 6:48 ` [PATCH v2 1/2] mm: cma: allocate cma areas bottom-up Mike Rapoport
2020-12-21 17:05 ` Roman Gushchin
2020-12-23 4:06 ` Andrew Morton
2020-12-23 16:35 ` Roman Gushchin
2020-12-23 22:10 ` Mike Rapoport
2020-12-28 19:36 ` Roman Gushchin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8cbafe95-0f8c-a9b7-2dc9-cded846622fd@gmail.com \
--to=f.fainelli@gmail.com \
--cc=Sergey.Semin@baikalelectronics.ru \
--cc=akpm@linux-foundation.org \
--cc=guro@fb.com \
--cc=iamjoonsoo.kim@lge.com \
--cc=jiaxun.yang@flygoat.com \
--cc=kdasu.kdev@gmail.com \
--cc=kernel-team@fb.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=linux-mm@kvack.org \
--cc=mhocko@kernel.org \
--cc=paul@crapouillou.net \
--cc=riel@surriel.com \
--cc=rppt@kernel.org \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.