* [PATCH V5 0/4] Add S4 SoC PLL and Peripheral clock controller
@ 2022-11-23 2:13 ` Yu Tu
0 siblings, 0 replies; 109+ messages in thread
From: Yu Tu @ 2022-11-23 2:13 UTC (permalink / raw)
To: linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel,
devicetree, Rob Herring, Neil Armstrong, Jerome Brunet,
Kevin Hilman, Michael Turquette, Stephen Boyd,
Krzysztof Kozlowski, Martin Blumenstingl
Cc: kelvin.zhang, Yu Tu
1. Add PLL and Peripheral clock controller driver for S4 SOC.
Yu Tu (4):
clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and
bindings
arm64: dts: meson: add S4 Soc PLL clock controller in DT
clk: meson: s4: add s4 SoC peripheral clock controller driver and
bindings
arm64: dts: meson: add S4 Soc Peripheral clock controller in DT
V4 -> V5: change format and clock flags and adjust the patch series as suggested
by Jerome.
V3 -> V4: change format and clock flags.
V2 -> V3: Use two clock controller.
V1 -> V2: Change format as discussed in the email.
Link:https://lore.kernel.org/all/20220823022630.25007-1-yu.tu@amlogic.com/
.../clock/amlogic,s4-peripherals-clkc.yaml | 105 +
.../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 +
MAINTAINERS | 1 +
arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 34 +
drivers/clk/meson/Kconfig | 25 +
drivers/clk/meson/Makefile | 2 +
drivers/clk/meson/s4-peripherals.c | 3783 +++++++++++++++++
drivers/clk/meson/s4-peripherals.h | 218 +
drivers/clk/meson/s4-pll.c | 875 ++++
drivers/clk/meson/s4-pll.h | 88 +
.../clock/amlogic,s4-peripherals-clkc.h | 131 +
.../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 +
12 files changed, 5343 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml
create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml
create mode 100644 drivers/clk/meson/s4-peripherals.c
create mode 100644 drivers/clk/meson/s4-peripherals.h
create mode 100644 drivers/clk/meson/s4-pll.c
create mode 100644 drivers/clk/meson/s4-pll.h
create mode 100644 include/dt-bindings/clock/amlogic,s4-peripherals-clkc.h
create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h
base-commit: 5eeec1fd8360d57899d29a607ff81d0094e6cf59
--
2.33.1
^ permalink raw reply [flat|nested] 109+ messages in thread* [PATCH V5 0/4] Add S4 SoC PLL and Peripheral clock controller @ 2022-11-23 2:13 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 2:13 UTC (permalink / raw) To: linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang, Yu Tu 1. Add PLL and Peripheral clock controller driver for S4 SOC. Yu Tu (4): clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings arm64: dts: meson: add S4 Soc PLL clock controller in DT clk: meson: s4: add s4 SoC peripheral clock controller driver and bindings arm64: dts: meson: add S4 Soc Peripheral clock controller in DT V4 -> V5: change format and clock flags and adjust the patch series as suggested by Jerome. V3 -> V4: change format and clock flags. V2 -> V3: Use two clock controller. V1 -> V2: Change format as discussed in the email. Link:https://lore.kernel.org/all/20220823022630.25007-1-yu.tu@amlogic.com/ .../clock/amlogic,s4-peripherals-clkc.yaml | 105 + .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + MAINTAINERS | 1 + arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 34 + drivers/clk/meson/Kconfig | 25 + drivers/clk/meson/Makefile | 2 + drivers/clk/meson/s4-peripherals.c | 3783 +++++++++++++++++ drivers/clk/meson/s4-peripherals.h | 218 + drivers/clk/meson/s4-pll.c | 875 ++++ drivers/clk/meson/s4-pll.h | 88 + .../clock/amlogic,s4-peripherals-clkc.h | 131 + .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + 12 files changed, 5343 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml create mode 100644 drivers/clk/meson/s4-peripherals.c create mode 100644 drivers/clk/meson/s4-peripherals.h create mode 100644 drivers/clk/meson/s4-pll.c create mode 100644 drivers/clk/meson/s4-pll.h create mode 100644 include/dt-bindings/clock/amlogic,s4-peripherals-clkc.h create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h base-commit: 5eeec1fd8360d57899d29a607ff81d0094e6cf59 -- 2.33.1 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
* [PATCH V5 0/4] Add S4 SoC PLL and Peripheral clock controller @ 2022-11-23 2:13 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 2:13 UTC (permalink / raw) To: linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang, Yu Tu 1. Add PLL and Peripheral clock controller driver for S4 SOC. Yu Tu (4): clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings arm64: dts: meson: add S4 Soc PLL clock controller in DT clk: meson: s4: add s4 SoC peripheral clock controller driver and bindings arm64: dts: meson: add S4 Soc Peripheral clock controller in DT V4 -> V5: change format and clock flags and adjust the patch series as suggested by Jerome. V3 -> V4: change format and clock flags. V2 -> V3: Use two clock controller. V1 -> V2: Change format as discussed in the email. Link:https://lore.kernel.org/all/20220823022630.25007-1-yu.tu@amlogic.com/ .../clock/amlogic,s4-peripherals-clkc.yaml | 105 + .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + MAINTAINERS | 1 + arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 34 + drivers/clk/meson/Kconfig | 25 + drivers/clk/meson/Makefile | 2 + drivers/clk/meson/s4-peripherals.c | 3783 +++++++++++++++++ drivers/clk/meson/s4-peripherals.h | 218 + drivers/clk/meson/s4-pll.c | 875 ++++ drivers/clk/meson/s4-pll.h | 88 + .../clock/amlogic,s4-peripherals-clkc.h | 131 + .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + 12 files changed, 5343 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml create mode 100644 drivers/clk/meson/s4-peripherals.c create mode 100644 drivers/clk/meson/s4-peripherals.h create mode 100644 drivers/clk/meson/s4-pll.c create mode 100644 drivers/clk/meson/s4-pll.h create mode 100644 include/dt-bindings/clock/amlogic,s4-peripherals-clkc.h create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h base-commit: 5eeec1fd8360d57899d29a607ff81d0094e6cf59 -- 2.33.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 109+ messages in thread
* [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings 2022-11-23 2:13 ` Yu Tu (?) @ 2022-11-23 2:13 ` Yu Tu -1 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 2:13 UTC (permalink / raw) To: linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang, Yu Tu Add the S4 PLL clock controller found and bindings in the s4 SoC family. Signed-off-by: Yu Tu <yu.tu@amlogic.com> --- .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + MAINTAINERS | 1 + drivers/clk/meson/Kconfig | 13 + drivers/clk/meson/Makefile | 1 + drivers/clk/meson/s4-pll.c | 875 ++++++++++++++++++ drivers/clk/meson/s4-pll.h | 88 ++ .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + 7 files changed, 1059 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml create mode 100644 drivers/clk/meson/s4-pll.c create mode 100644 drivers/clk/meson/s4-pll.h create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml new file mode 100644 index 000000000000..fd517e8ef14f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson S serials PLL Clock Controller + +maintainers: + - Neil Armstrong <narmstrong@baylibre.com> + - Jerome Brunet <jbrunet@baylibre.com> + - Yu Tu <yu.hu@amlogic.com> + + +properties: + compatible: + const: amlogic,s4-pll-clkc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: xtal + + "#clock-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - "#clock-cells" + +additionalProperties: false + +examples: + - | + clkc_pll: clock-controller@fe008000 { + compatible = "amlogic,s4-pll-clkc"; + reg = <0xfe008000 0x1e8>; + clocks = <&xtal>; + clock-names = "xtal"; + #clock-cells = <1>; + }; + +... diff --git a/MAINTAINERS b/MAINTAINERS index cf0f18502372..c65d33e33328 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1837,6 +1837,7 @@ L: linux-amlogic@lists.infradead.org S: Maintained F: Documentation/devicetree/bindings/clock/amlogic* F: drivers/clk/meson/ +F: include/dt-bindings/clock/amlogic* F: include/dt-bindings/clock/gxbb* F: include/dt-bindings/clock/meson* diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig index fc002c155bc3..a663c90a3f3b 100644 --- a/drivers/clk/meson/Kconfig +++ b/drivers/clk/meson/Kconfig @@ -115,4 +115,17 @@ config COMMON_CLK_G12A help Support for the clock controller on Amlogic S905D2, S905X2 and S905Y2 devices, aka g12a. Say Y if you want peripherals to work. + +config COMMON_CLK_S4_PLL + tristate "S4 SoC PLL clock controllers support" + depends on ARM64 + default y + select COMMON_CLK_MESON_MPLL + select COMMON_CLK_MESON_PLL + select COMMON_CLK_MESON_REGMAP + help + Support for the pll clock controller on Amlogic S805X2 and S905Y4 devices, + aka s4. Amlogic S805X2 and S905Y4 devices include AQ222 and AQ229. + Say Y if you want the board to work, because plls are the parent of most + peripherals. endmenu diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile index 6eca2a406ee3..376f49cc13f1 100644 --- a/drivers/clk/meson/Makefile +++ b/drivers/clk/meson/Makefile @@ -19,3 +19,4 @@ obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o +obj-$(CONFIG_COMMON_CLK_S4_PLL) += s4-pll.o diff --git a/drivers/clk/meson/s4-pll.c b/drivers/clk/meson/s4-pll.c new file mode 100644 index 000000000000..227d4fd7547d --- /dev/null +++ b/drivers/clk/meson/s4-pll.c @@ -0,0 +1,875 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Amlogic Meson-S4 PLL Clock Controller Driver + * + * Copyright (c) 2021 Amlogic, inc. + * Author: Yu Tu <yu.tu@amlogic.com> + */ + +#include <linux/clk-provider.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> + +#include "clk-mpll.h" +#include "clk-pll.h" +#include "clk-regmap.h" +#include "s4-pll.h" + +static DEFINE_SPINLOCK(meson_clk_lock); + +static struct clk_regmap s4_fixed_pll_dco = { + .data = &(struct meson_clk_pll_data){ + .en = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 28, + .width = 1, + }, + .m = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 0, + .width = 8, + }, + .n = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 10, + .width = 5, + }, + .frac = { + .reg_off = ANACTRL_FIXPLL_CTRL1, + .shift = 0, + .width = 17, + }, + .l = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 29, + .width = 1, + }, + }, + .hw.init = &(struct clk_init_data){ + .name = "fixed_pll_dco", + .ops = &meson_clk_pll_ro_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", } + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_fixed_pll = { + .data = &(struct clk_regmap_div_data){ + .offset = ANACTRL_FIXPLL_CTRL0, + .shift = 16, + .width = 2, + .flags = CLK_DIVIDER_POWER_OF_TWO, + }, + .hw.init = &(struct clk_init_data){ + .name = "fixed_pll", + .ops = &clk_regmap_divider_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fixed_pll_dco.hw + }, + .num_parents = 1, + /* + * This clock won't ever change at runtime so + * CLK_SET_RATE_PARENT is not required + */ + }, +}; + +static struct clk_fixed_factor s4_fclk_div2_div = { + .mult = 1, + .div = 2, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_fclk_div2 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL1, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fclk_div2_div.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor s4_fclk_div3_div = { + .mult = 1, + .div = 3, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div3_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_fclk_div3 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL1, + .bit_idx = 20, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div3", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fclk_div3_div.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor s4_fclk_div4_div = { + .mult = 1, + .div = 4, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div4_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_fclk_div4 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL1, + .bit_idx = 21, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div4", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fclk_div4_div.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor s4_fclk_div5_div = { + .mult = 1, + .div = 5, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div5_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_fclk_div5 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL1, + .bit_idx = 22, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div5", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fclk_div5_div.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor s4_fclk_div7_div = { + .mult = 1, + .div = 7, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div7_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_fclk_div7 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL1, + .bit_idx = 23, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div7", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fclk_div7_div.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor s4_fclk_div2p5_div = { + .mult = 2, + .div = 5, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2p5_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fixed_pll.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_fclk_div2p5 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL1, + .bit_idx = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2p5", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fclk_div2p5_div.hw + }, + .num_parents = 1, + }, +}; + +static const struct pll_mult_range s4_gp0_pll_mult_range = { + .min = 125, + .max = 250, +}; + +/* + * Internal gp0 pll emulation configuration parameters + */ +static const struct reg_sequence s4_gp0_init_regs[] = { + { .reg = ANACTRL_GP0PLL_CTRL1, .def = 0x00000000 }, + { .reg = ANACTRL_GP0PLL_CTRL2, .def = 0x00000000 }, + { .reg = ANACTRL_GP0PLL_CTRL3, .def = 0x48681c00 }, + { .reg = ANACTRL_GP0PLL_CTRL4, .def = 0x88770290 }, + { .reg = ANACTRL_GP0PLL_CTRL5, .def = 0x39272000 }, + { .reg = ANACTRL_GP0PLL_CTRL6, .def = 0x56540000 } +}; + +static struct clk_regmap s4_gp0_pll_dco = { + .data = &(struct meson_clk_pll_data){ + .en = { + .reg_off = ANACTRL_GP0PLL_CTRL0, + .shift = 28, + .width = 1, + }, + .m = { + .reg_off = ANACTRL_GP0PLL_CTRL0, + .shift = 0, + .width = 8, + }, + .n = { + .reg_off = ANACTRL_GP0PLL_CTRL0, + .shift = 10, + .width = 5, + }, + .frac = { + .reg_off = ANACTRL_GP0PLL_CTRL1, + .shift = 0, + .width = 17, + }, + .l = { + .reg_off = ANACTRL_GP0PLL_CTRL0, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = ANACTRL_GP0PLL_CTRL0, + .shift = 29, + .width = 1, + }, + .range = &s4_gp0_pll_mult_range, + .init_regs = s4_gp0_init_regs, + .init_count = ARRAY_SIZE(s4_gp0_init_regs), + }, + .hw.init = &(struct clk_init_data){ + .name = "gp0_pll_dco", + .ops = &meson_clk_pll_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", } + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_gp0_pll = { + .data = &(struct clk_regmap_div_data){ + .offset = ANACTRL_GP0PLL_CTRL0, + .shift = 16, + .width = 3, + .flags = (CLK_DIVIDER_POWER_OF_TWO | + CLK_DIVIDER_ROUND_CLOSEST), + }, + .hw.init = &(struct clk_init_data){ + .name = "gp0_pll", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_gp0_pll_dco.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* + * Internal hifi pll emulation configuration parameters + */ +static const struct reg_sequence s4_hifi_init_regs[] = { + { .reg = ANACTRL_HIFIPLL_CTRL1, .def = 0x00010e56 }, + { .reg = ANACTRL_HIFIPLL_CTRL2, .def = 0x00000000 }, + { .reg = ANACTRL_HIFIPLL_CTRL3, .def = 0x6a285c00 }, + { .reg = ANACTRL_HIFIPLL_CTRL4, .def = 0x65771290 }, + { .reg = ANACTRL_HIFIPLL_CTRL5, .def = 0x39272000 }, + { .reg = ANACTRL_HIFIPLL_CTRL6, .def = 0x56540000 } +}; + +static struct clk_regmap s4_hifi_pll_dco = { + .data = &(struct meson_clk_pll_data){ + .en = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 28, + .width = 1, + }, + .m = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 0, + .width = 8, + }, + .n = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 10, + .width = 5, + }, + .frac = { + .reg_off = ANACTRL_HIFIPLL_CTRL1, + .shift = 0, + .width = 17, + }, + .l = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 29, + .width = 1, + }, + .range = &s4_gp0_pll_mult_range, + .init_regs = s4_hifi_init_regs, + .init_count = ARRAY_SIZE(s4_hifi_init_regs), + .flags = CLK_MESON_PLL_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "hifi_pll_dco", + .ops = &meson_clk_pll_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", } + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_hifi_pll = { + .data = &(struct clk_regmap_div_data){ + .offset = ANACTRL_HIFIPLL_CTRL0, + .shift = 16, + .width = 2, + .flags = (CLK_DIVIDER_POWER_OF_TWO | + CLK_DIVIDER_ROUND_CLOSEST), + }, + .hw.init = &(struct clk_init_data){ + .name = "hifi_pll", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_hifi_pll_dco.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_hdmi_pll_dco = { + .data = &(struct meson_clk_pll_data){ + .en = { + .reg_off = ANACTRL_HDMIPLL_CTRL0, + .shift = 28, + .width = 1, + }, + .m = { + .reg_off = ANACTRL_HDMIPLL_CTRL0, + .shift = 0, + .width = 8, + }, + .n = { + .reg_off = ANACTRL_HDMIPLL_CTRL0, + .shift = 10, + .width = 5, + }, + .frac = { + .reg_off = ANACTRL_HDMIPLL_CTRL1, + .shift = 0, + .width = 17, + }, + .l = { + .reg_off = ANACTRL_HDMIPLL_CTRL0, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = ANACTRL_HDMIPLL_CTRL0, + .shift = 29, + .width = 1, + }, + .range = &s4_gp0_pll_mult_range, + }, + .hw.init = &(struct clk_init_data){ + .name = "hdmi_pll_dco", + .ops = &meson_clk_pll_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", } + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_hdmi_pll_od = { + .data = &(struct clk_regmap_div_data){ + .offset = ANACTRL_HDMIPLL_CTRL0, + .shift = 16, + .width = 4, + .flags = CLK_DIVIDER_POWER_OF_TWO, + }, + .hw.init = &(struct clk_init_data){ + .name = "hdmi_pll_od", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_hdmi_pll_dco.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_hdmi_pll = { + .data = &(struct clk_regmap_div_data){ + .offset = ANACTRL_HDMIPLL_CTRL0, + .shift = 20, + .width = 2, + .flags = CLK_DIVIDER_POWER_OF_TWO, + }, + .hw.init = &(struct clk_init_data){ + .name = "hdmi_pll", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_hdmi_pll_od.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_fixed_factor s4_mpll_50m_div = { + .mult = 1, + .div = 80, + .hw.init = &(struct clk_init_data){ + .name = "mpll_50m_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fixed_pll_dco.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_mpll_50m = { + .data = &(struct clk_regmap_mux_data){ + .offset = ANACTRL_FIXPLL_CTRL3, + .mask = 0x1, + .shift = 5, + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll_50m", + .ops = &clk_regmap_mux_ro_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", }, + { .hw = &s4_mpll_50m_div.hw }, + }, + .num_parents = 2, + }, +}; + +static struct clk_fixed_factor s4_mpll_prediv = { + .mult = 1, + .div = 2, + .hw.init = &(struct clk_init_data){ + .name = "mpll_prediv", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fixed_pll_dco.hw + }, + .num_parents = 1, + }, +}; + +static const struct reg_sequence s4_mpll0_init_regs[] = { + { .reg = ANACTRL_MPLL_CTRL2, .def = 0x40000033 } +}; + +static struct clk_regmap s4_mpll0_div = { + .data = &(struct meson_clk_mpll_data){ + .sdm = { + .reg_off = ANACTRL_MPLL_CTRL1, + .shift = 0, + .width = 14, + }, + .sdm_en = { + .reg_off = ANACTRL_MPLL_CTRL1, + .shift = 30, + .width = 1, + }, + .n2 = { + .reg_off = ANACTRL_MPLL_CTRL1, + .shift = 20, + .width = 9, + }, + .ssen = { + .reg_off = ANACTRL_MPLL_CTRL1, + .shift = 29, + .width = 1, + }, + .lock = &meson_clk_lock, + .init_regs = s4_mpll0_init_regs, + .init_count = ARRAY_SIZE(s4_mpll0_init_regs), + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll0_div", + .ops = &meson_clk_mpll_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_mpll_prediv.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_mpll0 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_MPLL_CTRL1, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll0", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_mpll0_div.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct reg_sequence s4_mpll1_init_regs[] = { + { .reg = ANACTRL_MPLL_CTRL4, .def = 0x40000033 } +}; + +static struct clk_regmap s4_mpll1_div = { + .data = &(struct meson_clk_mpll_data){ + .sdm = { + .reg_off = ANACTRL_MPLL_CTRL3, + .shift = 0, + .width = 14, + }, + .sdm_en = { + .reg_off = ANACTRL_MPLL_CTRL3, + .shift = 30, + .width = 1, + }, + .n2 = { + .reg_off = ANACTRL_MPLL_CTRL3, + .shift = 20, + .width = 9, + }, + .ssen = { + .reg_off = ANACTRL_MPLL_CTRL3, + .shift = 29, + .width = 1, + }, + .lock = &meson_clk_lock, + .init_regs = s4_mpll1_init_regs, + .init_count = ARRAY_SIZE(s4_mpll1_init_regs), + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll1_div", + .ops = &meson_clk_mpll_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_mpll_prediv.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_mpll1 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_MPLL_CTRL3, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll1", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_mpll1_div.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct reg_sequence s4_mpll2_init_regs[] = { + { .reg = ANACTRL_MPLL_CTRL6, .def = 0x40000033 } +}; + +static struct clk_regmap s4_mpll2_div = { + .data = &(struct meson_clk_mpll_data){ + .sdm = { + .reg_off = ANACTRL_MPLL_CTRL5, + .shift = 0, + .width = 14, + }, + .sdm_en = { + .reg_off = ANACTRL_MPLL_CTRL5, + .shift = 30, + .width = 1, + }, + .n2 = { + .reg_off = ANACTRL_MPLL_CTRL5, + .shift = 20, + .width = 9, + }, + .ssen = { + .reg_off = ANACTRL_MPLL_CTRL5, + .shift = 29, + .width = 1, + }, + .lock = &meson_clk_lock, + .init_regs = s4_mpll2_init_regs, + .init_count = ARRAY_SIZE(s4_mpll2_init_regs), + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll2_div", + .ops = &meson_clk_mpll_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_mpll_prediv.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_mpll2 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_MPLL_CTRL5, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll2", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_mpll2_div.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct reg_sequence s4_mpll3_init_regs[] = { + { .reg = ANACTRL_MPLL_CTRL8, .def = 0x40000033 } +}; + +static struct clk_regmap s4_mpll3_div = { + .data = &(struct meson_clk_mpll_data){ + .sdm = { + .reg_off = ANACTRL_MPLL_CTRL7, + .shift = 0, + .width = 14, + }, + .sdm_en = { + .reg_off = ANACTRL_MPLL_CTRL7, + .shift = 30, + .width = 1, + }, + .n2 = { + .reg_off = ANACTRL_MPLL_CTRL7, + .shift = 20, + .width = 9, + }, + .ssen = { + .reg_off = ANACTRL_MPLL_CTRL7, + .shift = 29, + .width = 1, + }, + .lock = &meson_clk_lock, + .init_regs = s4_mpll3_init_regs, + .init_count = ARRAY_SIZE(s4_mpll3_init_regs), + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll3_div", + .ops = &meson_clk_mpll_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_mpll_prediv.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_mpll3 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_MPLL_CTRL7, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll3", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_mpll3_div.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* Array of all clocks provided by this provider */ +static struct clk_hw_onecell_data s4_pll_hw_onecell_data = { + .hws = { + [CLKID_FIXED_PLL_DCO] = &s4_fixed_pll_dco.hw, + [CLKID_FIXED_PLL] = &s4_fixed_pll.hw, + [CLKID_FCLK_DIV2_DIV] = &s4_fclk_div2_div.hw, + [CLKID_FCLK_DIV2] = &s4_fclk_div2.hw, + [CLKID_FCLK_DIV3_DIV] = &s4_fclk_div3_div.hw, + [CLKID_FCLK_DIV3] = &s4_fclk_div3.hw, + [CLKID_FCLK_DIV4_DIV] = &s4_fclk_div4_div.hw, + [CLKID_FCLK_DIV4] = &s4_fclk_div4.hw, + [CLKID_FCLK_DIV5_DIV] = &s4_fclk_div5_div.hw, + [CLKID_FCLK_DIV5] = &s4_fclk_div5.hw, + [CLKID_FCLK_DIV7_DIV] = &s4_fclk_div7_div.hw, + [CLKID_FCLK_DIV7] = &s4_fclk_div7.hw, + [CLKID_FCLK_DIV2P5_DIV] = &s4_fclk_div2p5_div.hw, + [CLKID_FCLK_DIV2P5] = &s4_fclk_div2p5.hw, + [CLKID_GP0_PLL_DCO] = &s4_gp0_pll_dco.hw, + [CLKID_GP0_PLL] = &s4_gp0_pll.hw, + [CLKID_HIFI_PLL_DCO] = &s4_hifi_pll_dco.hw, + [CLKID_HIFI_PLL] = &s4_hifi_pll.hw, + [CLKID_HDMI_PLL_DCO] = &s4_hdmi_pll_dco.hw, + [CLKID_HDMI_PLL_OD] = &s4_hdmi_pll_od.hw, + [CLKID_HDMI_PLL] = &s4_hdmi_pll.hw, + [CLKID_MPLL_50M_DIV] = &s4_mpll_50m_div.hw, + [CLKID_MPLL_50M] = &s4_mpll_50m.hw, + [CLKID_MPLL_PREDIV] = &s4_mpll_prediv.hw, + [CLKID_MPLL0_DIV] = &s4_mpll0_div.hw, + [CLKID_MPLL0] = &s4_mpll0.hw, + [CLKID_MPLL1_DIV] = &s4_mpll1_div.hw, + [CLKID_MPLL1] = &s4_mpll1.hw, + [CLKID_MPLL2_DIV] = &s4_mpll2_div.hw, + [CLKID_MPLL2] = &s4_mpll2.hw, + [CLKID_MPLL3_DIV] = &s4_mpll3_div.hw, + [CLKID_MPLL3] = &s4_mpll3.hw, + [NR_PLL_CLKS] = NULL + }, + .num = NR_PLL_CLKS, +}; + +static struct clk_regmap *const s4_pll_clk_regmaps[] = { + &s4_fixed_pll_dco, + &s4_fixed_pll, + &s4_fclk_div2, + &s4_fclk_div3, + &s4_fclk_div4, + &s4_fclk_div5, + &s4_fclk_div7, + &s4_fclk_div2p5, + &s4_gp0_pll_dco, + &s4_gp0_pll, + &s4_hifi_pll_dco, + &s4_hifi_pll, + &s4_hdmi_pll_dco, + &s4_hdmi_pll_od, + &s4_hdmi_pll, + &s4_mpll_50m, + &s4_mpll0_div, + &s4_mpll0, + &s4_mpll1_div, + &s4_mpll1, + &s4_mpll2_div, + &s4_mpll2, + &s4_mpll3_div, + &s4_mpll3, +}; + +static const struct reg_sequence s4_init_regs[] = { + { .reg = ANACTRL_MPLL_CTRL0, .def = 0x00000543 }, +}; + +static struct regmap_config clkc_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static int meson_s4_pll_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct regmap *regmap; + void __iomem *base; + int ret, i; + + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) + return PTR_ERR(base); + + regmap = devm_regmap_init_mmio(dev, base, &clkc_regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + ret = regmap_multi_reg_write(regmap, s4_init_regs, ARRAY_SIZE(s4_init_regs)); + if (ret) { + dev_err(dev, "Failed to init registers\n"); + return ret; + } + + /* Populate regmap for the regmap backed clocks */ + for (i = 0; i < ARRAY_SIZE(s4_pll_clk_regmaps); i++) + s4_pll_clk_regmaps[i]->map = regmap; + + for (i = 0; i < s4_pll_hw_onecell_data.num; i++) { + /* array might be sparse */ + if (!s4_pll_hw_onecell_data.hws[i]) + continue; + + ret = devm_clk_hw_register(dev, s4_pll_hw_onecell_data.hws[i]); + if (ret) { + dev_err(dev, "Clock registration failed\n"); + return ret; + } + } + + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, + &s4_pll_hw_onecell_data); +} + +static const struct of_device_id clkc_match_table[] = { + { + .compatible = "amlogic,s4-pll-clkc", + }, + {} +}; + +static struct platform_driver s4_driver = { + .probe = meson_s4_pll_probe, + .driver = { + .name = "s4-pll-clkc", + .of_match_table = clkc_match_table, + }, +}; + +module_platform_driver(s4_driver); +MODULE_LICENSE("GPL"); diff --git a/drivers/clk/meson/s4-pll.h b/drivers/clk/meson/s4-pll.h new file mode 100644 index 000000000000..332f2d7b94b4 --- /dev/null +++ b/drivers/clk/meson/s4-pll.h @@ -0,0 +1,88 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright (c) 2021 Amlogic, inc. + * Author: Yu Tu <yu.tu@amlogic.com> + */ + +#ifndef __MESON_S4_PLL_H__ +#define __MESON_S4_PLL_H__ + +/* ANA_CTRL - Registers + * REG_BASE: REGISTER_BASE_ADDR = 0xfe008000 + */ +#define ANACTRL_FIXPLL_CTRL0 0x040 +#define ANACTRL_FIXPLL_CTRL1 0x044 +#define ANACTRL_FIXPLL_CTRL2 0x048 +#define ANACTRL_FIXPLL_CTRL3 0x04c +#define ANACTRL_FIXPLL_CTRL4 0x050 +#define ANACTRL_FIXPLL_CTRL5 0x054 +#define ANACTRL_FIXPLL_CTRL6 0x058 +#define ANACTRL_FIXPLL_STS 0x05c +#define ANACTRL_GP0PLL_CTRL0 0x080 +#define ANACTRL_GP0PLL_CTRL1 0x084 +#define ANACTRL_GP0PLL_CTRL2 0x088 +#define ANACTRL_GP0PLL_CTRL3 0x08c +#define ANACTRL_GP0PLL_CTRL4 0x090 +#define ANACTRL_GP0PLL_CTRL5 0x094 +#define ANACTRL_GP0PLL_CTRL6 0x098 +#define ANACTRL_GP0PLL_STS 0x09c +#define ANACTRL_HIFIPLL_CTRL0 0x100 +#define ANACTRL_HIFIPLL_CTRL1 0x104 +#define ANACTRL_HIFIPLL_CTRL2 0x108 +#define ANACTRL_HIFIPLL_CTRL3 0x10c +#define ANACTRL_HIFIPLL_CTRL4 0x110 +#define ANACTRL_HIFIPLL_CTRL5 0x114 +#define ANACTRL_HIFIPLL_CTRL6 0x118 +#define ANACTRL_HIFIPLL_STS 0x11c +#define ANACTRL_MPLL_CTRL0 0x180 +#define ANACTRL_MPLL_CTRL1 0x184 +#define ANACTRL_MPLL_CTRL2 0x188 +#define ANACTRL_MPLL_CTRL3 0x18c +#define ANACTRL_MPLL_CTRL4 0x190 +#define ANACTRL_MPLL_CTRL5 0x194 +#define ANACTRL_MPLL_CTRL6 0x198 +#define ANACTRL_MPLL_CTRL7 0x19c +#define ANACTRL_MPLL_CTRL8 0x1a0 +#define ANACTRL_MPLL_STS 0x1a4 +#define ANACTRL_HDMIPLL_CTRL0 0x1c0 +#define ANACTRL_HDMIPLL_CTRL1 0x1c4 +#define ANACTRL_HDMIPLL_CTRL2 0x1c8 +#define ANACTRL_HDMIPLL_CTRL3 0x1cc +#define ANACTRL_HDMIPLL_CTRL4 0x1d0 +#define ANACTRL_HDMIPLL_CTRL5 0x1d4 +#define ANACTRL_HDMIPLL_CTRL6 0x1d8 +#define ANACTRL_HDMIPLL_STS 0x1dc +#define ANACTRL_HDMIPLL_VLOCK 0x1e4 + +/* + * CLKID index values + * + * These indices are entirely contrived and do not map onto the hardware. + * It has now been decided to expose everything by default in the DT header: + * include/dt-bindings/clock/axg-clkc.h. Only the clocks ids we don't want + * to expose, such as the internal muxes and dividers of composite clocks, + * will remain defined here. + */ +#define CLKID_FIXED_PLL_DCO 0 +#define CLKID_FCLK_DIV2_DIV 2 +#define CLKID_FCLK_DIV3_DIV 4 +#define CLKID_FCLK_DIV4_DIV 6 +#define CLKID_FCLK_DIV5_DIV 8 +#define CLKID_FCLK_DIV7_DIV 10 +#define CLKID_FCLK_DIV2P5_DIV 12 +#define CLKID_GP0_PLL_DCO 14 +#define CLKID_HIFI_PLL_DCO 16 +#define CLKID_HDMI_PLL_DCO 18 +#define CLKID_HDMI_PLL_OD 19 +#define CLKID_MPLL_50M_DIV 21 +#define CLKID_MPLL_PREDIV 23 +#define CLKID_MPLL0_DIV 24 +#define CLKID_MPLL1_DIV 26 +#define CLKID_MPLL2_DIV 28 +#define CLKID_MPLL3_DIV 30 + +#define NR_PLL_CLKS 32 +/* include the CLKIDs that have been made part of the DT binding */ +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> + +#endif /* __MESON_S4_PLL_H__ */ diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h new file mode 100644 index 000000000000..345f87023886 --- /dev/null +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. + * Author: Yu Tu <yu.tu@amlogic.com> + */ + +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H + +/* + * CLKID index values + */ + +#define CLKID_FIXED_PLL 1 +#define CLKID_FCLK_DIV2 3 +#define CLKID_FCLK_DIV3 5 +#define CLKID_FCLK_DIV4 7 +#define CLKID_FCLK_DIV5 9 +#define CLKID_FCLK_DIV7 11 +#define CLKID_FCLK_DIV2P5 13 +#define CLKID_GP0_PLL 15 +#define CLKID_HIFI_PLL 17 +#define CLKID_HDMI_PLL 20 +#define CLKID_MPLL_50M 22 +#define CLKID_MPLL0 25 +#define CLKID_MPLL1 27 +#define CLKID_MPLL2 29 +#define CLKID_MPLL3 31 + +#endif /* _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H */ -- 2.33.1 ^ permalink raw reply related [flat|nested] 109+ messages in thread
* [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings @ 2022-11-23 2:13 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 2:13 UTC (permalink / raw) To: linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang, Yu Tu Add the S4 PLL clock controller found and bindings in the s4 SoC family. Signed-off-by: Yu Tu <yu.tu@amlogic.com> --- .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + MAINTAINERS | 1 + drivers/clk/meson/Kconfig | 13 + drivers/clk/meson/Makefile | 1 + drivers/clk/meson/s4-pll.c | 875 ++++++++++++++++++ drivers/clk/meson/s4-pll.h | 88 ++ .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + 7 files changed, 1059 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml create mode 100644 drivers/clk/meson/s4-pll.c create mode 100644 drivers/clk/meson/s4-pll.h create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml new file mode 100644 index 000000000000..fd517e8ef14f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson S serials PLL Clock Controller + +maintainers: + - Neil Armstrong <narmstrong@baylibre.com> + - Jerome Brunet <jbrunet@baylibre.com> + - Yu Tu <yu.hu@amlogic.com> + + +properties: + compatible: + const: amlogic,s4-pll-clkc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: xtal + + "#clock-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - "#clock-cells" + +additionalProperties: false + +examples: + - | + clkc_pll: clock-controller@fe008000 { + compatible = "amlogic,s4-pll-clkc"; + reg = <0xfe008000 0x1e8>; + clocks = <&xtal>; + clock-names = "xtal"; + #clock-cells = <1>; + }; + +... diff --git a/MAINTAINERS b/MAINTAINERS index cf0f18502372..c65d33e33328 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1837,6 +1837,7 @@ L: linux-amlogic@lists.infradead.org S: Maintained F: Documentation/devicetree/bindings/clock/amlogic* F: drivers/clk/meson/ +F: include/dt-bindings/clock/amlogic* F: include/dt-bindings/clock/gxbb* F: include/dt-bindings/clock/meson* diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig index fc002c155bc3..a663c90a3f3b 100644 --- a/drivers/clk/meson/Kconfig +++ b/drivers/clk/meson/Kconfig @@ -115,4 +115,17 @@ config COMMON_CLK_G12A help Support for the clock controller on Amlogic S905D2, S905X2 and S905Y2 devices, aka g12a. Say Y if you want peripherals to work. + +config COMMON_CLK_S4_PLL + tristate "S4 SoC PLL clock controllers support" + depends on ARM64 + default y + select COMMON_CLK_MESON_MPLL + select COMMON_CLK_MESON_PLL + select COMMON_CLK_MESON_REGMAP + help + Support for the pll clock controller on Amlogic S805X2 and S905Y4 devices, + aka s4. Amlogic S805X2 and S905Y4 devices include AQ222 and AQ229. + Say Y if you want the board to work, because plls are the parent of most + peripherals. endmenu diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile index 6eca2a406ee3..376f49cc13f1 100644 --- a/drivers/clk/meson/Makefile +++ b/drivers/clk/meson/Makefile @@ -19,3 +19,4 @@ obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o +obj-$(CONFIG_COMMON_CLK_S4_PLL) += s4-pll.o diff --git a/drivers/clk/meson/s4-pll.c b/drivers/clk/meson/s4-pll.c new file mode 100644 index 000000000000..227d4fd7547d --- /dev/null +++ b/drivers/clk/meson/s4-pll.c @@ -0,0 +1,875 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Amlogic Meson-S4 PLL Clock Controller Driver + * + * Copyright (c) 2021 Amlogic, inc. + * Author: Yu Tu <yu.tu@amlogic.com> + */ + +#include <linux/clk-provider.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> + +#include "clk-mpll.h" +#include "clk-pll.h" +#include "clk-regmap.h" +#include "s4-pll.h" + +static DEFINE_SPINLOCK(meson_clk_lock); + +static struct clk_regmap s4_fixed_pll_dco = { + .data = &(struct meson_clk_pll_data){ + .en = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 28, + .width = 1, + }, + .m = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 0, + .width = 8, + }, + .n = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 10, + .width = 5, + }, + .frac = { + .reg_off = ANACTRL_FIXPLL_CTRL1, + .shift = 0, + .width = 17, + }, + .l = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 29, + .width = 1, + }, + }, + .hw.init = &(struct clk_init_data){ + .name = "fixed_pll_dco", + .ops = &meson_clk_pll_ro_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", } + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_fixed_pll = { + .data = &(struct clk_regmap_div_data){ + .offset = ANACTRL_FIXPLL_CTRL0, + .shift = 16, + .width = 2, + .flags = CLK_DIVIDER_POWER_OF_TWO, + }, + .hw.init = &(struct clk_init_data){ + .name = "fixed_pll", + .ops = &clk_regmap_divider_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fixed_pll_dco.hw + }, + .num_parents = 1, + /* + * This clock won't ever change at runtime so + * CLK_SET_RATE_PARENT is not required + */ + }, +}; + +static struct clk_fixed_factor s4_fclk_div2_div = { + .mult = 1, + .div = 2, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_fclk_div2 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL1, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fclk_div2_div.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor s4_fclk_div3_div = { + .mult = 1, + .div = 3, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div3_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_fclk_div3 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL1, + .bit_idx = 20, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div3", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fclk_div3_div.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor s4_fclk_div4_div = { + .mult = 1, + .div = 4, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div4_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_fclk_div4 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL1, + .bit_idx = 21, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div4", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fclk_div4_div.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor s4_fclk_div5_div = { + .mult = 1, + .div = 5, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div5_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_fclk_div5 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL1, + .bit_idx = 22, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div5", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fclk_div5_div.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor s4_fclk_div7_div = { + .mult = 1, + .div = 7, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div7_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_fclk_div7 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL1, + .bit_idx = 23, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div7", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fclk_div7_div.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor s4_fclk_div2p5_div = { + .mult = 2, + .div = 5, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2p5_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fixed_pll.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_fclk_div2p5 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL1, + .bit_idx = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2p5", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fclk_div2p5_div.hw + }, + .num_parents = 1, + }, +}; + +static const struct pll_mult_range s4_gp0_pll_mult_range = { + .min = 125, + .max = 250, +}; + +/* + * Internal gp0 pll emulation configuration parameters + */ +static const struct reg_sequence s4_gp0_init_regs[] = { + { .reg = ANACTRL_GP0PLL_CTRL1, .def = 0x00000000 }, + { .reg = ANACTRL_GP0PLL_CTRL2, .def = 0x00000000 }, + { .reg = ANACTRL_GP0PLL_CTRL3, .def = 0x48681c00 }, + { .reg = ANACTRL_GP0PLL_CTRL4, .def = 0x88770290 }, + { .reg = ANACTRL_GP0PLL_CTRL5, .def = 0x39272000 }, + { .reg = ANACTRL_GP0PLL_CTRL6, .def = 0x56540000 } +}; + +static struct clk_regmap s4_gp0_pll_dco = { + .data = &(struct meson_clk_pll_data){ + .en = { + .reg_off = ANACTRL_GP0PLL_CTRL0, + .shift = 28, + .width = 1, + }, + .m = { + .reg_off = ANACTRL_GP0PLL_CTRL0, + .shift = 0, + .width = 8, + }, + .n = { + .reg_off = ANACTRL_GP0PLL_CTRL0, + .shift = 10, + .width = 5, + }, + .frac = { + .reg_off = ANACTRL_GP0PLL_CTRL1, + .shift = 0, + .width = 17, + }, + .l = { + .reg_off = ANACTRL_GP0PLL_CTRL0, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = ANACTRL_GP0PLL_CTRL0, + .shift = 29, + .width = 1, + }, + .range = &s4_gp0_pll_mult_range, + .init_regs = s4_gp0_init_regs, + .init_count = ARRAY_SIZE(s4_gp0_init_regs), + }, + .hw.init = &(struct clk_init_data){ + .name = "gp0_pll_dco", + .ops = &meson_clk_pll_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", } + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_gp0_pll = { + .data = &(struct clk_regmap_div_data){ + .offset = ANACTRL_GP0PLL_CTRL0, + .shift = 16, + .width = 3, + .flags = (CLK_DIVIDER_POWER_OF_TWO | + CLK_DIVIDER_ROUND_CLOSEST), + }, + .hw.init = &(struct clk_init_data){ + .name = "gp0_pll", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_gp0_pll_dco.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* + * Internal hifi pll emulation configuration parameters + */ +static const struct reg_sequence s4_hifi_init_regs[] = { + { .reg = ANACTRL_HIFIPLL_CTRL1, .def = 0x00010e56 }, + { .reg = ANACTRL_HIFIPLL_CTRL2, .def = 0x00000000 }, + { .reg = ANACTRL_HIFIPLL_CTRL3, .def = 0x6a285c00 }, + { .reg = ANACTRL_HIFIPLL_CTRL4, .def = 0x65771290 }, + { .reg = ANACTRL_HIFIPLL_CTRL5, .def = 0x39272000 }, + { .reg = ANACTRL_HIFIPLL_CTRL6, .def = 0x56540000 } +}; + +static struct clk_regmap s4_hifi_pll_dco = { + .data = &(struct meson_clk_pll_data){ + .en = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 28, + .width = 1, + }, + .m = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 0, + .width = 8, + }, + .n = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 10, + .width = 5, + }, + .frac = { + .reg_off = ANACTRL_HIFIPLL_CTRL1, + .shift = 0, + .width = 17, + }, + .l = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 29, + .width = 1, + }, + .range = &s4_gp0_pll_mult_range, + .init_regs = s4_hifi_init_regs, + .init_count = ARRAY_SIZE(s4_hifi_init_regs), + .flags = CLK_MESON_PLL_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "hifi_pll_dco", + .ops = &meson_clk_pll_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", } + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_hifi_pll = { + .data = &(struct clk_regmap_div_data){ + .offset = ANACTRL_HIFIPLL_CTRL0, + .shift = 16, + .width = 2, + .flags = (CLK_DIVIDER_POWER_OF_TWO | + CLK_DIVIDER_ROUND_CLOSEST), + }, + .hw.init = &(struct clk_init_data){ + .name = "hifi_pll", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_hifi_pll_dco.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_hdmi_pll_dco = { + .data = &(struct meson_clk_pll_data){ + .en = { + .reg_off = ANACTRL_HDMIPLL_CTRL0, + .shift = 28, + .width = 1, + }, + .m = { + .reg_off = ANACTRL_HDMIPLL_CTRL0, + .shift = 0, + .width = 8, + }, + .n = { + .reg_off = ANACTRL_HDMIPLL_CTRL0, + .shift = 10, + .width = 5, + }, + .frac = { + .reg_off = ANACTRL_HDMIPLL_CTRL1, + .shift = 0, + .width = 17, + }, + .l = { + .reg_off = ANACTRL_HDMIPLL_CTRL0, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = ANACTRL_HDMIPLL_CTRL0, + .shift = 29, + .width = 1, + }, + .range = &s4_gp0_pll_mult_range, + }, + .hw.init = &(struct clk_init_data){ + .name = "hdmi_pll_dco", + .ops = &meson_clk_pll_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", } + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_hdmi_pll_od = { + .data = &(struct clk_regmap_div_data){ + .offset = ANACTRL_HDMIPLL_CTRL0, + .shift = 16, + .width = 4, + .flags = CLK_DIVIDER_POWER_OF_TWO, + }, + .hw.init = &(struct clk_init_data){ + .name = "hdmi_pll_od", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_hdmi_pll_dco.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_hdmi_pll = { + .data = &(struct clk_regmap_div_data){ + .offset = ANACTRL_HDMIPLL_CTRL0, + .shift = 20, + .width = 2, + .flags = CLK_DIVIDER_POWER_OF_TWO, + }, + .hw.init = &(struct clk_init_data){ + .name = "hdmi_pll", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_hdmi_pll_od.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_fixed_factor s4_mpll_50m_div = { + .mult = 1, + .div = 80, + .hw.init = &(struct clk_init_data){ + .name = "mpll_50m_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fixed_pll_dco.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_mpll_50m = { + .data = &(struct clk_regmap_mux_data){ + .offset = ANACTRL_FIXPLL_CTRL3, + .mask = 0x1, + .shift = 5, + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll_50m", + .ops = &clk_regmap_mux_ro_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", }, + { .hw = &s4_mpll_50m_div.hw }, + }, + .num_parents = 2, + }, +}; + +static struct clk_fixed_factor s4_mpll_prediv = { + .mult = 1, + .div = 2, + .hw.init = &(struct clk_init_data){ + .name = "mpll_prediv", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fixed_pll_dco.hw + }, + .num_parents = 1, + }, +}; + +static const struct reg_sequence s4_mpll0_init_regs[] = { + { .reg = ANACTRL_MPLL_CTRL2, .def = 0x40000033 } +}; + +static struct clk_regmap s4_mpll0_div = { + .data = &(struct meson_clk_mpll_data){ + .sdm = { + .reg_off = ANACTRL_MPLL_CTRL1, + .shift = 0, + .width = 14, + }, + .sdm_en = { + .reg_off = ANACTRL_MPLL_CTRL1, + .shift = 30, + .width = 1, + }, + .n2 = { + .reg_off = ANACTRL_MPLL_CTRL1, + .shift = 20, + .width = 9, + }, + .ssen = { + .reg_off = ANACTRL_MPLL_CTRL1, + .shift = 29, + .width = 1, + }, + .lock = &meson_clk_lock, + .init_regs = s4_mpll0_init_regs, + .init_count = ARRAY_SIZE(s4_mpll0_init_regs), + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll0_div", + .ops = &meson_clk_mpll_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_mpll_prediv.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_mpll0 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_MPLL_CTRL1, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll0", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_mpll0_div.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct reg_sequence s4_mpll1_init_regs[] = { + { .reg = ANACTRL_MPLL_CTRL4, .def = 0x40000033 } +}; + +static struct clk_regmap s4_mpll1_div = { + .data = &(struct meson_clk_mpll_data){ + .sdm = { + .reg_off = ANACTRL_MPLL_CTRL3, + .shift = 0, + .width = 14, + }, + .sdm_en = { + .reg_off = ANACTRL_MPLL_CTRL3, + .shift = 30, + .width = 1, + }, + .n2 = { + .reg_off = ANACTRL_MPLL_CTRL3, + .shift = 20, + .width = 9, + }, + .ssen = { + .reg_off = ANACTRL_MPLL_CTRL3, + .shift = 29, + .width = 1, + }, + .lock = &meson_clk_lock, + .init_regs = s4_mpll1_init_regs, + .init_count = ARRAY_SIZE(s4_mpll1_init_regs), + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll1_div", + .ops = &meson_clk_mpll_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_mpll_prediv.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_mpll1 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_MPLL_CTRL3, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll1", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_mpll1_div.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct reg_sequence s4_mpll2_init_regs[] = { + { .reg = ANACTRL_MPLL_CTRL6, .def = 0x40000033 } +}; + +static struct clk_regmap s4_mpll2_div = { + .data = &(struct meson_clk_mpll_data){ + .sdm = { + .reg_off = ANACTRL_MPLL_CTRL5, + .shift = 0, + .width = 14, + }, + .sdm_en = { + .reg_off = ANACTRL_MPLL_CTRL5, + .shift = 30, + .width = 1, + }, + .n2 = { + .reg_off = ANACTRL_MPLL_CTRL5, + .shift = 20, + .width = 9, + }, + .ssen = { + .reg_off = ANACTRL_MPLL_CTRL5, + .shift = 29, + .width = 1, + }, + .lock = &meson_clk_lock, + .init_regs = s4_mpll2_init_regs, + .init_count = ARRAY_SIZE(s4_mpll2_init_regs), + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll2_div", + .ops = &meson_clk_mpll_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_mpll_prediv.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_mpll2 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_MPLL_CTRL5, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll2", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_mpll2_div.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct reg_sequence s4_mpll3_init_regs[] = { + { .reg = ANACTRL_MPLL_CTRL8, .def = 0x40000033 } +}; + +static struct clk_regmap s4_mpll3_div = { + .data = &(struct meson_clk_mpll_data){ + .sdm = { + .reg_off = ANACTRL_MPLL_CTRL7, + .shift = 0, + .width = 14, + }, + .sdm_en = { + .reg_off = ANACTRL_MPLL_CTRL7, + .shift = 30, + .width = 1, + }, + .n2 = { + .reg_off = ANACTRL_MPLL_CTRL7, + .shift = 20, + .width = 9, + }, + .ssen = { + .reg_off = ANACTRL_MPLL_CTRL7, + .shift = 29, + .width = 1, + }, + .lock = &meson_clk_lock, + .init_regs = s4_mpll3_init_regs, + .init_count = ARRAY_SIZE(s4_mpll3_init_regs), + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll3_div", + .ops = &meson_clk_mpll_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_mpll_prediv.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_mpll3 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_MPLL_CTRL7, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll3", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_mpll3_div.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* Array of all clocks provided by this provider */ +static struct clk_hw_onecell_data s4_pll_hw_onecell_data = { + .hws = { + [CLKID_FIXED_PLL_DCO] = &s4_fixed_pll_dco.hw, + [CLKID_FIXED_PLL] = &s4_fixed_pll.hw, + [CLKID_FCLK_DIV2_DIV] = &s4_fclk_div2_div.hw, + [CLKID_FCLK_DIV2] = &s4_fclk_div2.hw, + [CLKID_FCLK_DIV3_DIV] = &s4_fclk_div3_div.hw, + [CLKID_FCLK_DIV3] = &s4_fclk_div3.hw, + [CLKID_FCLK_DIV4_DIV] = &s4_fclk_div4_div.hw, + [CLKID_FCLK_DIV4] = &s4_fclk_div4.hw, + [CLKID_FCLK_DIV5_DIV] = &s4_fclk_div5_div.hw, + [CLKID_FCLK_DIV5] = &s4_fclk_div5.hw, + [CLKID_FCLK_DIV7_DIV] = &s4_fclk_div7_div.hw, + [CLKID_FCLK_DIV7] = &s4_fclk_div7.hw, + [CLKID_FCLK_DIV2P5_DIV] = &s4_fclk_div2p5_div.hw, + [CLKID_FCLK_DIV2P5] = &s4_fclk_div2p5.hw, + [CLKID_GP0_PLL_DCO] = &s4_gp0_pll_dco.hw, + [CLKID_GP0_PLL] = &s4_gp0_pll.hw, + [CLKID_HIFI_PLL_DCO] = &s4_hifi_pll_dco.hw, + [CLKID_HIFI_PLL] = &s4_hifi_pll.hw, + [CLKID_HDMI_PLL_DCO] = &s4_hdmi_pll_dco.hw, + [CLKID_HDMI_PLL_OD] = &s4_hdmi_pll_od.hw, + [CLKID_HDMI_PLL] = &s4_hdmi_pll.hw, + [CLKID_MPLL_50M_DIV] = &s4_mpll_50m_div.hw, + [CLKID_MPLL_50M] = &s4_mpll_50m.hw, + [CLKID_MPLL_PREDIV] = &s4_mpll_prediv.hw, + [CLKID_MPLL0_DIV] = &s4_mpll0_div.hw, + [CLKID_MPLL0] = &s4_mpll0.hw, + [CLKID_MPLL1_DIV] = &s4_mpll1_div.hw, + [CLKID_MPLL1] = &s4_mpll1.hw, + [CLKID_MPLL2_DIV] = &s4_mpll2_div.hw, + [CLKID_MPLL2] = &s4_mpll2.hw, + [CLKID_MPLL3_DIV] = &s4_mpll3_div.hw, + [CLKID_MPLL3] = &s4_mpll3.hw, + [NR_PLL_CLKS] = NULL + }, + .num = NR_PLL_CLKS, +}; + +static struct clk_regmap *const s4_pll_clk_regmaps[] = { + &s4_fixed_pll_dco, + &s4_fixed_pll, + &s4_fclk_div2, + &s4_fclk_div3, + &s4_fclk_div4, + &s4_fclk_div5, + &s4_fclk_div7, + &s4_fclk_div2p5, + &s4_gp0_pll_dco, + &s4_gp0_pll, + &s4_hifi_pll_dco, + &s4_hifi_pll, + &s4_hdmi_pll_dco, + &s4_hdmi_pll_od, + &s4_hdmi_pll, + &s4_mpll_50m, + &s4_mpll0_div, + &s4_mpll0, + &s4_mpll1_div, + &s4_mpll1, + &s4_mpll2_div, + &s4_mpll2, + &s4_mpll3_div, + &s4_mpll3, +}; + +static const struct reg_sequence s4_init_regs[] = { + { .reg = ANACTRL_MPLL_CTRL0, .def = 0x00000543 }, +}; + +static struct regmap_config clkc_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static int meson_s4_pll_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct regmap *regmap; + void __iomem *base; + int ret, i; + + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) + return PTR_ERR(base); + + regmap = devm_regmap_init_mmio(dev, base, &clkc_regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + ret = regmap_multi_reg_write(regmap, s4_init_regs, ARRAY_SIZE(s4_init_regs)); + if (ret) { + dev_err(dev, "Failed to init registers\n"); + return ret; + } + + /* Populate regmap for the regmap backed clocks */ + for (i = 0; i < ARRAY_SIZE(s4_pll_clk_regmaps); i++) + s4_pll_clk_regmaps[i]->map = regmap; + + for (i = 0; i < s4_pll_hw_onecell_data.num; i++) { + /* array might be sparse */ + if (!s4_pll_hw_onecell_data.hws[i]) + continue; + + ret = devm_clk_hw_register(dev, s4_pll_hw_onecell_data.hws[i]); + if (ret) { + dev_err(dev, "Clock registration failed\n"); + return ret; + } + } + + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, + &s4_pll_hw_onecell_data); +} + +static const struct of_device_id clkc_match_table[] = { + { + .compatible = "amlogic,s4-pll-clkc", + }, + {} +}; + +static struct platform_driver s4_driver = { + .probe = meson_s4_pll_probe, + .driver = { + .name = "s4-pll-clkc", + .of_match_table = clkc_match_table, + }, +}; + +module_platform_driver(s4_driver); +MODULE_LICENSE("GPL"); diff --git a/drivers/clk/meson/s4-pll.h b/drivers/clk/meson/s4-pll.h new file mode 100644 index 000000000000..332f2d7b94b4 --- /dev/null +++ b/drivers/clk/meson/s4-pll.h @@ -0,0 +1,88 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright (c) 2021 Amlogic, inc. + * Author: Yu Tu <yu.tu@amlogic.com> + */ + +#ifndef __MESON_S4_PLL_H__ +#define __MESON_S4_PLL_H__ + +/* ANA_CTRL - Registers + * REG_BASE: REGISTER_BASE_ADDR = 0xfe008000 + */ +#define ANACTRL_FIXPLL_CTRL0 0x040 +#define ANACTRL_FIXPLL_CTRL1 0x044 +#define ANACTRL_FIXPLL_CTRL2 0x048 +#define ANACTRL_FIXPLL_CTRL3 0x04c +#define ANACTRL_FIXPLL_CTRL4 0x050 +#define ANACTRL_FIXPLL_CTRL5 0x054 +#define ANACTRL_FIXPLL_CTRL6 0x058 +#define ANACTRL_FIXPLL_STS 0x05c +#define ANACTRL_GP0PLL_CTRL0 0x080 +#define ANACTRL_GP0PLL_CTRL1 0x084 +#define ANACTRL_GP0PLL_CTRL2 0x088 +#define ANACTRL_GP0PLL_CTRL3 0x08c +#define ANACTRL_GP0PLL_CTRL4 0x090 +#define ANACTRL_GP0PLL_CTRL5 0x094 +#define ANACTRL_GP0PLL_CTRL6 0x098 +#define ANACTRL_GP0PLL_STS 0x09c +#define ANACTRL_HIFIPLL_CTRL0 0x100 +#define ANACTRL_HIFIPLL_CTRL1 0x104 +#define ANACTRL_HIFIPLL_CTRL2 0x108 +#define ANACTRL_HIFIPLL_CTRL3 0x10c +#define ANACTRL_HIFIPLL_CTRL4 0x110 +#define ANACTRL_HIFIPLL_CTRL5 0x114 +#define ANACTRL_HIFIPLL_CTRL6 0x118 +#define ANACTRL_HIFIPLL_STS 0x11c +#define ANACTRL_MPLL_CTRL0 0x180 +#define ANACTRL_MPLL_CTRL1 0x184 +#define ANACTRL_MPLL_CTRL2 0x188 +#define ANACTRL_MPLL_CTRL3 0x18c +#define ANACTRL_MPLL_CTRL4 0x190 +#define ANACTRL_MPLL_CTRL5 0x194 +#define ANACTRL_MPLL_CTRL6 0x198 +#define ANACTRL_MPLL_CTRL7 0x19c +#define ANACTRL_MPLL_CTRL8 0x1a0 +#define ANACTRL_MPLL_STS 0x1a4 +#define ANACTRL_HDMIPLL_CTRL0 0x1c0 +#define ANACTRL_HDMIPLL_CTRL1 0x1c4 +#define ANACTRL_HDMIPLL_CTRL2 0x1c8 +#define ANACTRL_HDMIPLL_CTRL3 0x1cc +#define ANACTRL_HDMIPLL_CTRL4 0x1d0 +#define ANACTRL_HDMIPLL_CTRL5 0x1d4 +#define ANACTRL_HDMIPLL_CTRL6 0x1d8 +#define ANACTRL_HDMIPLL_STS 0x1dc +#define ANACTRL_HDMIPLL_VLOCK 0x1e4 + +/* + * CLKID index values + * + * These indices are entirely contrived and do not map onto the hardware. + * It has now been decided to expose everything by default in the DT header: + * include/dt-bindings/clock/axg-clkc.h. Only the clocks ids we don't want + * to expose, such as the internal muxes and dividers of composite clocks, + * will remain defined here. + */ +#define CLKID_FIXED_PLL_DCO 0 +#define CLKID_FCLK_DIV2_DIV 2 +#define CLKID_FCLK_DIV3_DIV 4 +#define CLKID_FCLK_DIV4_DIV 6 +#define CLKID_FCLK_DIV5_DIV 8 +#define CLKID_FCLK_DIV7_DIV 10 +#define CLKID_FCLK_DIV2P5_DIV 12 +#define CLKID_GP0_PLL_DCO 14 +#define CLKID_HIFI_PLL_DCO 16 +#define CLKID_HDMI_PLL_DCO 18 +#define CLKID_HDMI_PLL_OD 19 +#define CLKID_MPLL_50M_DIV 21 +#define CLKID_MPLL_PREDIV 23 +#define CLKID_MPLL0_DIV 24 +#define CLKID_MPLL1_DIV 26 +#define CLKID_MPLL2_DIV 28 +#define CLKID_MPLL3_DIV 30 + +#define NR_PLL_CLKS 32 +/* include the CLKIDs that have been made part of the DT binding */ +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> + +#endif /* __MESON_S4_PLL_H__ */ diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h new file mode 100644 index 000000000000..345f87023886 --- /dev/null +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. + * Author: Yu Tu <yu.tu@amlogic.com> + */ + +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H + +/* + * CLKID index values + */ + +#define CLKID_FIXED_PLL 1 +#define CLKID_FCLK_DIV2 3 +#define CLKID_FCLK_DIV3 5 +#define CLKID_FCLK_DIV4 7 +#define CLKID_FCLK_DIV5 9 +#define CLKID_FCLK_DIV7 11 +#define CLKID_FCLK_DIV2P5 13 +#define CLKID_GP0_PLL 15 +#define CLKID_HIFI_PLL 17 +#define CLKID_HDMI_PLL 20 +#define CLKID_MPLL_50M 22 +#define CLKID_MPLL0 25 +#define CLKID_MPLL1 27 +#define CLKID_MPLL2 29 +#define CLKID_MPLL3 31 + +#endif /* _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H */ -- 2.33.1 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply related [flat|nested] 109+ messages in thread
* [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings @ 2022-11-23 2:13 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 2:13 UTC (permalink / raw) To: linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang, Yu Tu Add the S4 PLL clock controller found and bindings in the s4 SoC family. Signed-off-by: Yu Tu <yu.tu@amlogic.com> --- .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + MAINTAINERS | 1 + drivers/clk/meson/Kconfig | 13 + drivers/clk/meson/Makefile | 1 + drivers/clk/meson/s4-pll.c | 875 ++++++++++++++++++ drivers/clk/meson/s4-pll.h | 88 ++ .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + 7 files changed, 1059 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml create mode 100644 drivers/clk/meson/s4-pll.c create mode 100644 drivers/clk/meson/s4-pll.h create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml new file mode 100644 index 000000000000..fd517e8ef14f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson S serials PLL Clock Controller + +maintainers: + - Neil Armstrong <narmstrong@baylibre.com> + - Jerome Brunet <jbrunet@baylibre.com> + - Yu Tu <yu.hu@amlogic.com> + + +properties: + compatible: + const: amlogic,s4-pll-clkc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: xtal + + "#clock-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - "#clock-cells" + +additionalProperties: false + +examples: + - | + clkc_pll: clock-controller@fe008000 { + compatible = "amlogic,s4-pll-clkc"; + reg = <0xfe008000 0x1e8>; + clocks = <&xtal>; + clock-names = "xtal"; + #clock-cells = <1>; + }; + +... diff --git a/MAINTAINERS b/MAINTAINERS index cf0f18502372..c65d33e33328 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1837,6 +1837,7 @@ L: linux-amlogic@lists.infradead.org S: Maintained F: Documentation/devicetree/bindings/clock/amlogic* F: drivers/clk/meson/ +F: include/dt-bindings/clock/amlogic* F: include/dt-bindings/clock/gxbb* F: include/dt-bindings/clock/meson* diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig index fc002c155bc3..a663c90a3f3b 100644 --- a/drivers/clk/meson/Kconfig +++ b/drivers/clk/meson/Kconfig @@ -115,4 +115,17 @@ config COMMON_CLK_G12A help Support for the clock controller on Amlogic S905D2, S905X2 and S905Y2 devices, aka g12a. Say Y if you want peripherals to work. + +config COMMON_CLK_S4_PLL + tristate "S4 SoC PLL clock controllers support" + depends on ARM64 + default y + select COMMON_CLK_MESON_MPLL + select COMMON_CLK_MESON_PLL + select COMMON_CLK_MESON_REGMAP + help + Support for the pll clock controller on Amlogic S805X2 and S905Y4 devices, + aka s4. Amlogic S805X2 and S905Y4 devices include AQ222 and AQ229. + Say Y if you want the board to work, because plls are the parent of most + peripherals. endmenu diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile index 6eca2a406ee3..376f49cc13f1 100644 --- a/drivers/clk/meson/Makefile +++ b/drivers/clk/meson/Makefile @@ -19,3 +19,4 @@ obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o +obj-$(CONFIG_COMMON_CLK_S4_PLL) += s4-pll.o diff --git a/drivers/clk/meson/s4-pll.c b/drivers/clk/meson/s4-pll.c new file mode 100644 index 000000000000..227d4fd7547d --- /dev/null +++ b/drivers/clk/meson/s4-pll.c @@ -0,0 +1,875 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Amlogic Meson-S4 PLL Clock Controller Driver + * + * Copyright (c) 2021 Amlogic, inc. + * Author: Yu Tu <yu.tu@amlogic.com> + */ + +#include <linux/clk-provider.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> + +#include "clk-mpll.h" +#include "clk-pll.h" +#include "clk-regmap.h" +#include "s4-pll.h" + +static DEFINE_SPINLOCK(meson_clk_lock); + +static struct clk_regmap s4_fixed_pll_dco = { + .data = &(struct meson_clk_pll_data){ + .en = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 28, + .width = 1, + }, + .m = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 0, + .width = 8, + }, + .n = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 10, + .width = 5, + }, + .frac = { + .reg_off = ANACTRL_FIXPLL_CTRL1, + .shift = 0, + .width = 17, + }, + .l = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = ANACTRL_FIXPLL_CTRL0, + .shift = 29, + .width = 1, + }, + }, + .hw.init = &(struct clk_init_data){ + .name = "fixed_pll_dco", + .ops = &meson_clk_pll_ro_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", } + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_fixed_pll = { + .data = &(struct clk_regmap_div_data){ + .offset = ANACTRL_FIXPLL_CTRL0, + .shift = 16, + .width = 2, + .flags = CLK_DIVIDER_POWER_OF_TWO, + }, + .hw.init = &(struct clk_init_data){ + .name = "fixed_pll", + .ops = &clk_regmap_divider_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fixed_pll_dco.hw + }, + .num_parents = 1, + /* + * This clock won't ever change at runtime so + * CLK_SET_RATE_PARENT is not required + */ + }, +}; + +static struct clk_fixed_factor s4_fclk_div2_div = { + .mult = 1, + .div = 2, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_fclk_div2 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL1, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fclk_div2_div.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor s4_fclk_div3_div = { + .mult = 1, + .div = 3, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div3_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_fclk_div3 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL1, + .bit_idx = 20, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div3", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fclk_div3_div.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor s4_fclk_div4_div = { + .mult = 1, + .div = 4, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div4_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_fclk_div4 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL1, + .bit_idx = 21, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div4", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fclk_div4_div.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor s4_fclk_div5_div = { + .mult = 1, + .div = 5, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div5_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_fclk_div5 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL1, + .bit_idx = 22, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div5", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fclk_div5_div.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor s4_fclk_div7_div = { + .mult = 1, + .div = 7, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div7_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_fclk_div7 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL1, + .bit_idx = 23, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div7", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fclk_div7_div.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor s4_fclk_div2p5_div = { + .mult = 2, + .div = 5, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2p5_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fixed_pll.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_fclk_div2p5 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_FIXPLL_CTRL1, + .bit_idx = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2p5", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fclk_div2p5_div.hw + }, + .num_parents = 1, + }, +}; + +static const struct pll_mult_range s4_gp0_pll_mult_range = { + .min = 125, + .max = 250, +}; + +/* + * Internal gp0 pll emulation configuration parameters + */ +static const struct reg_sequence s4_gp0_init_regs[] = { + { .reg = ANACTRL_GP0PLL_CTRL1, .def = 0x00000000 }, + { .reg = ANACTRL_GP0PLL_CTRL2, .def = 0x00000000 }, + { .reg = ANACTRL_GP0PLL_CTRL3, .def = 0x48681c00 }, + { .reg = ANACTRL_GP0PLL_CTRL4, .def = 0x88770290 }, + { .reg = ANACTRL_GP0PLL_CTRL5, .def = 0x39272000 }, + { .reg = ANACTRL_GP0PLL_CTRL6, .def = 0x56540000 } +}; + +static struct clk_regmap s4_gp0_pll_dco = { + .data = &(struct meson_clk_pll_data){ + .en = { + .reg_off = ANACTRL_GP0PLL_CTRL0, + .shift = 28, + .width = 1, + }, + .m = { + .reg_off = ANACTRL_GP0PLL_CTRL0, + .shift = 0, + .width = 8, + }, + .n = { + .reg_off = ANACTRL_GP0PLL_CTRL0, + .shift = 10, + .width = 5, + }, + .frac = { + .reg_off = ANACTRL_GP0PLL_CTRL1, + .shift = 0, + .width = 17, + }, + .l = { + .reg_off = ANACTRL_GP0PLL_CTRL0, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = ANACTRL_GP0PLL_CTRL0, + .shift = 29, + .width = 1, + }, + .range = &s4_gp0_pll_mult_range, + .init_regs = s4_gp0_init_regs, + .init_count = ARRAY_SIZE(s4_gp0_init_regs), + }, + .hw.init = &(struct clk_init_data){ + .name = "gp0_pll_dco", + .ops = &meson_clk_pll_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", } + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_gp0_pll = { + .data = &(struct clk_regmap_div_data){ + .offset = ANACTRL_GP0PLL_CTRL0, + .shift = 16, + .width = 3, + .flags = (CLK_DIVIDER_POWER_OF_TWO | + CLK_DIVIDER_ROUND_CLOSEST), + }, + .hw.init = &(struct clk_init_data){ + .name = "gp0_pll", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_gp0_pll_dco.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* + * Internal hifi pll emulation configuration parameters + */ +static const struct reg_sequence s4_hifi_init_regs[] = { + { .reg = ANACTRL_HIFIPLL_CTRL1, .def = 0x00010e56 }, + { .reg = ANACTRL_HIFIPLL_CTRL2, .def = 0x00000000 }, + { .reg = ANACTRL_HIFIPLL_CTRL3, .def = 0x6a285c00 }, + { .reg = ANACTRL_HIFIPLL_CTRL4, .def = 0x65771290 }, + { .reg = ANACTRL_HIFIPLL_CTRL5, .def = 0x39272000 }, + { .reg = ANACTRL_HIFIPLL_CTRL6, .def = 0x56540000 } +}; + +static struct clk_regmap s4_hifi_pll_dco = { + .data = &(struct meson_clk_pll_data){ + .en = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 28, + .width = 1, + }, + .m = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 0, + .width = 8, + }, + .n = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 10, + .width = 5, + }, + .frac = { + .reg_off = ANACTRL_HIFIPLL_CTRL1, + .shift = 0, + .width = 17, + }, + .l = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = ANACTRL_HIFIPLL_CTRL0, + .shift = 29, + .width = 1, + }, + .range = &s4_gp0_pll_mult_range, + .init_regs = s4_hifi_init_regs, + .init_count = ARRAY_SIZE(s4_hifi_init_regs), + .flags = CLK_MESON_PLL_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "hifi_pll_dco", + .ops = &meson_clk_pll_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", } + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_hifi_pll = { + .data = &(struct clk_regmap_div_data){ + .offset = ANACTRL_HIFIPLL_CTRL0, + .shift = 16, + .width = 2, + .flags = (CLK_DIVIDER_POWER_OF_TWO | + CLK_DIVIDER_ROUND_CLOSEST), + }, + .hw.init = &(struct clk_init_data){ + .name = "hifi_pll", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_hifi_pll_dco.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_hdmi_pll_dco = { + .data = &(struct meson_clk_pll_data){ + .en = { + .reg_off = ANACTRL_HDMIPLL_CTRL0, + .shift = 28, + .width = 1, + }, + .m = { + .reg_off = ANACTRL_HDMIPLL_CTRL0, + .shift = 0, + .width = 8, + }, + .n = { + .reg_off = ANACTRL_HDMIPLL_CTRL0, + .shift = 10, + .width = 5, + }, + .frac = { + .reg_off = ANACTRL_HDMIPLL_CTRL1, + .shift = 0, + .width = 17, + }, + .l = { + .reg_off = ANACTRL_HDMIPLL_CTRL0, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = ANACTRL_HDMIPLL_CTRL0, + .shift = 29, + .width = 1, + }, + .range = &s4_gp0_pll_mult_range, + }, + .hw.init = &(struct clk_init_data){ + .name = "hdmi_pll_dco", + .ops = &meson_clk_pll_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", } + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_hdmi_pll_od = { + .data = &(struct clk_regmap_div_data){ + .offset = ANACTRL_HDMIPLL_CTRL0, + .shift = 16, + .width = 4, + .flags = CLK_DIVIDER_POWER_OF_TWO, + }, + .hw.init = &(struct clk_init_data){ + .name = "hdmi_pll_od", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_hdmi_pll_dco.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_hdmi_pll = { + .data = &(struct clk_regmap_div_data){ + .offset = ANACTRL_HDMIPLL_CTRL0, + .shift = 20, + .width = 2, + .flags = CLK_DIVIDER_POWER_OF_TWO, + }, + .hw.init = &(struct clk_init_data){ + .name = "hdmi_pll", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_hdmi_pll_od.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_fixed_factor s4_mpll_50m_div = { + .mult = 1, + .div = 80, + .hw.init = &(struct clk_init_data){ + .name = "mpll_50m_div", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fixed_pll_dco.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_mpll_50m = { + .data = &(struct clk_regmap_mux_data){ + .offset = ANACTRL_FIXPLL_CTRL3, + .mask = 0x1, + .shift = 5, + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll_50m", + .ops = &clk_regmap_mux_ro_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", }, + { .hw = &s4_mpll_50m_div.hw }, + }, + .num_parents = 2, + }, +}; + +static struct clk_fixed_factor s4_mpll_prediv = { + .mult = 1, + .div = 2, + .hw.init = &(struct clk_init_data){ + .name = "mpll_prediv", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_fixed_pll_dco.hw + }, + .num_parents = 1, + }, +}; + +static const struct reg_sequence s4_mpll0_init_regs[] = { + { .reg = ANACTRL_MPLL_CTRL2, .def = 0x40000033 } +}; + +static struct clk_regmap s4_mpll0_div = { + .data = &(struct meson_clk_mpll_data){ + .sdm = { + .reg_off = ANACTRL_MPLL_CTRL1, + .shift = 0, + .width = 14, + }, + .sdm_en = { + .reg_off = ANACTRL_MPLL_CTRL1, + .shift = 30, + .width = 1, + }, + .n2 = { + .reg_off = ANACTRL_MPLL_CTRL1, + .shift = 20, + .width = 9, + }, + .ssen = { + .reg_off = ANACTRL_MPLL_CTRL1, + .shift = 29, + .width = 1, + }, + .lock = &meson_clk_lock, + .init_regs = s4_mpll0_init_regs, + .init_count = ARRAY_SIZE(s4_mpll0_init_regs), + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll0_div", + .ops = &meson_clk_mpll_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_mpll_prediv.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_mpll0 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_MPLL_CTRL1, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll0", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_mpll0_div.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct reg_sequence s4_mpll1_init_regs[] = { + { .reg = ANACTRL_MPLL_CTRL4, .def = 0x40000033 } +}; + +static struct clk_regmap s4_mpll1_div = { + .data = &(struct meson_clk_mpll_data){ + .sdm = { + .reg_off = ANACTRL_MPLL_CTRL3, + .shift = 0, + .width = 14, + }, + .sdm_en = { + .reg_off = ANACTRL_MPLL_CTRL3, + .shift = 30, + .width = 1, + }, + .n2 = { + .reg_off = ANACTRL_MPLL_CTRL3, + .shift = 20, + .width = 9, + }, + .ssen = { + .reg_off = ANACTRL_MPLL_CTRL3, + .shift = 29, + .width = 1, + }, + .lock = &meson_clk_lock, + .init_regs = s4_mpll1_init_regs, + .init_count = ARRAY_SIZE(s4_mpll1_init_regs), + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll1_div", + .ops = &meson_clk_mpll_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_mpll_prediv.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_mpll1 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_MPLL_CTRL3, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll1", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_mpll1_div.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct reg_sequence s4_mpll2_init_regs[] = { + { .reg = ANACTRL_MPLL_CTRL6, .def = 0x40000033 } +}; + +static struct clk_regmap s4_mpll2_div = { + .data = &(struct meson_clk_mpll_data){ + .sdm = { + .reg_off = ANACTRL_MPLL_CTRL5, + .shift = 0, + .width = 14, + }, + .sdm_en = { + .reg_off = ANACTRL_MPLL_CTRL5, + .shift = 30, + .width = 1, + }, + .n2 = { + .reg_off = ANACTRL_MPLL_CTRL5, + .shift = 20, + .width = 9, + }, + .ssen = { + .reg_off = ANACTRL_MPLL_CTRL5, + .shift = 29, + .width = 1, + }, + .lock = &meson_clk_lock, + .init_regs = s4_mpll2_init_regs, + .init_count = ARRAY_SIZE(s4_mpll2_init_regs), + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll2_div", + .ops = &meson_clk_mpll_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_mpll_prediv.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_mpll2 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_MPLL_CTRL5, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll2", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_mpll2_div.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct reg_sequence s4_mpll3_init_regs[] = { + { .reg = ANACTRL_MPLL_CTRL8, .def = 0x40000033 } +}; + +static struct clk_regmap s4_mpll3_div = { + .data = &(struct meson_clk_mpll_data){ + .sdm = { + .reg_off = ANACTRL_MPLL_CTRL7, + .shift = 0, + .width = 14, + }, + .sdm_en = { + .reg_off = ANACTRL_MPLL_CTRL7, + .shift = 30, + .width = 1, + }, + .n2 = { + .reg_off = ANACTRL_MPLL_CTRL7, + .shift = 20, + .width = 9, + }, + .ssen = { + .reg_off = ANACTRL_MPLL_CTRL7, + .shift = 29, + .width = 1, + }, + .lock = &meson_clk_lock, + .init_regs = s4_mpll3_init_regs, + .init_count = ARRAY_SIZE(s4_mpll3_init_regs), + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll3_div", + .ops = &meson_clk_mpll_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_mpll_prediv.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_mpll3 = { + .data = &(struct clk_regmap_gate_data){ + .offset = ANACTRL_MPLL_CTRL7, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data){ + .name = "mpll3", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_mpll3_div.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* Array of all clocks provided by this provider */ +static struct clk_hw_onecell_data s4_pll_hw_onecell_data = { + .hws = { + [CLKID_FIXED_PLL_DCO] = &s4_fixed_pll_dco.hw, + [CLKID_FIXED_PLL] = &s4_fixed_pll.hw, + [CLKID_FCLK_DIV2_DIV] = &s4_fclk_div2_div.hw, + [CLKID_FCLK_DIV2] = &s4_fclk_div2.hw, + [CLKID_FCLK_DIV3_DIV] = &s4_fclk_div3_div.hw, + [CLKID_FCLK_DIV3] = &s4_fclk_div3.hw, + [CLKID_FCLK_DIV4_DIV] = &s4_fclk_div4_div.hw, + [CLKID_FCLK_DIV4] = &s4_fclk_div4.hw, + [CLKID_FCLK_DIV5_DIV] = &s4_fclk_div5_div.hw, + [CLKID_FCLK_DIV5] = &s4_fclk_div5.hw, + [CLKID_FCLK_DIV7_DIV] = &s4_fclk_div7_div.hw, + [CLKID_FCLK_DIV7] = &s4_fclk_div7.hw, + [CLKID_FCLK_DIV2P5_DIV] = &s4_fclk_div2p5_div.hw, + [CLKID_FCLK_DIV2P5] = &s4_fclk_div2p5.hw, + [CLKID_GP0_PLL_DCO] = &s4_gp0_pll_dco.hw, + [CLKID_GP0_PLL] = &s4_gp0_pll.hw, + [CLKID_HIFI_PLL_DCO] = &s4_hifi_pll_dco.hw, + [CLKID_HIFI_PLL] = &s4_hifi_pll.hw, + [CLKID_HDMI_PLL_DCO] = &s4_hdmi_pll_dco.hw, + [CLKID_HDMI_PLL_OD] = &s4_hdmi_pll_od.hw, + [CLKID_HDMI_PLL] = &s4_hdmi_pll.hw, + [CLKID_MPLL_50M_DIV] = &s4_mpll_50m_div.hw, + [CLKID_MPLL_50M] = &s4_mpll_50m.hw, + [CLKID_MPLL_PREDIV] = &s4_mpll_prediv.hw, + [CLKID_MPLL0_DIV] = &s4_mpll0_div.hw, + [CLKID_MPLL0] = &s4_mpll0.hw, + [CLKID_MPLL1_DIV] = &s4_mpll1_div.hw, + [CLKID_MPLL1] = &s4_mpll1.hw, + [CLKID_MPLL2_DIV] = &s4_mpll2_div.hw, + [CLKID_MPLL2] = &s4_mpll2.hw, + [CLKID_MPLL3_DIV] = &s4_mpll3_div.hw, + [CLKID_MPLL3] = &s4_mpll3.hw, + [NR_PLL_CLKS] = NULL + }, + .num = NR_PLL_CLKS, +}; + +static struct clk_regmap *const s4_pll_clk_regmaps[] = { + &s4_fixed_pll_dco, + &s4_fixed_pll, + &s4_fclk_div2, + &s4_fclk_div3, + &s4_fclk_div4, + &s4_fclk_div5, + &s4_fclk_div7, + &s4_fclk_div2p5, + &s4_gp0_pll_dco, + &s4_gp0_pll, + &s4_hifi_pll_dco, + &s4_hifi_pll, + &s4_hdmi_pll_dco, + &s4_hdmi_pll_od, + &s4_hdmi_pll, + &s4_mpll_50m, + &s4_mpll0_div, + &s4_mpll0, + &s4_mpll1_div, + &s4_mpll1, + &s4_mpll2_div, + &s4_mpll2, + &s4_mpll3_div, + &s4_mpll3, +}; + +static const struct reg_sequence s4_init_regs[] = { + { .reg = ANACTRL_MPLL_CTRL0, .def = 0x00000543 }, +}; + +static struct regmap_config clkc_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static int meson_s4_pll_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct regmap *regmap; + void __iomem *base; + int ret, i; + + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) + return PTR_ERR(base); + + regmap = devm_regmap_init_mmio(dev, base, &clkc_regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + ret = regmap_multi_reg_write(regmap, s4_init_regs, ARRAY_SIZE(s4_init_regs)); + if (ret) { + dev_err(dev, "Failed to init registers\n"); + return ret; + } + + /* Populate regmap for the regmap backed clocks */ + for (i = 0; i < ARRAY_SIZE(s4_pll_clk_regmaps); i++) + s4_pll_clk_regmaps[i]->map = regmap; + + for (i = 0; i < s4_pll_hw_onecell_data.num; i++) { + /* array might be sparse */ + if (!s4_pll_hw_onecell_data.hws[i]) + continue; + + ret = devm_clk_hw_register(dev, s4_pll_hw_onecell_data.hws[i]); + if (ret) { + dev_err(dev, "Clock registration failed\n"); + return ret; + } + } + + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, + &s4_pll_hw_onecell_data); +} + +static const struct of_device_id clkc_match_table[] = { + { + .compatible = "amlogic,s4-pll-clkc", + }, + {} +}; + +static struct platform_driver s4_driver = { + .probe = meson_s4_pll_probe, + .driver = { + .name = "s4-pll-clkc", + .of_match_table = clkc_match_table, + }, +}; + +module_platform_driver(s4_driver); +MODULE_LICENSE("GPL"); diff --git a/drivers/clk/meson/s4-pll.h b/drivers/clk/meson/s4-pll.h new file mode 100644 index 000000000000..332f2d7b94b4 --- /dev/null +++ b/drivers/clk/meson/s4-pll.h @@ -0,0 +1,88 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright (c) 2021 Amlogic, inc. + * Author: Yu Tu <yu.tu@amlogic.com> + */ + +#ifndef __MESON_S4_PLL_H__ +#define __MESON_S4_PLL_H__ + +/* ANA_CTRL - Registers + * REG_BASE: REGISTER_BASE_ADDR = 0xfe008000 + */ +#define ANACTRL_FIXPLL_CTRL0 0x040 +#define ANACTRL_FIXPLL_CTRL1 0x044 +#define ANACTRL_FIXPLL_CTRL2 0x048 +#define ANACTRL_FIXPLL_CTRL3 0x04c +#define ANACTRL_FIXPLL_CTRL4 0x050 +#define ANACTRL_FIXPLL_CTRL5 0x054 +#define ANACTRL_FIXPLL_CTRL6 0x058 +#define ANACTRL_FIXPLL_STS 0x05c +#define ANACTRL_GP0PLL_CTRL0 0x080 +#define ANACTRL_GP0PLL_CTRL1 0x084 +#define ANACTRL_GP0PLL_CTRL2 0x088 +#define ANACTRL_GP0PLL_CTRL3 0x08c +#define ANACTRL_GP0PLL_CTRL4 0x090 +#define ANACTRL_GP0PLL_CTRL5 0x094 +#define ANACTRL_GP0PLL_CTRL6 0x098 +#define ANACTRL_GP0PLL_STS 0x09c +#define ANACTRL_HIFIPLL_CTRL0 0x100 +#define ANACTRL_HIFIPLL_CTRL1 0x104 +#define ANACTRL_HIFIPLL_CTRL2 0x108 +#define ANACTRL_HIFIPLL_CTRL3 0x10c +#define ANACTRL_HIFIPLL_CTRL4 0x110 +#define ANACTRL_HIFIPLL_CTRL5 0x114 +#define ANACTRL_HIFIPLL_CTRL6 0x118 +#define ANACTRL_HIFIPLL_STS 0x11c +#define ANACTRL_MPLL_CTRL0 0x180 +#define ANACTRL_MPLL_CTRL1 0x184 +#define ANACTRL_MPLL_CTRL2 0x188 +#define ANACTRL_MPLL_CTRL3 0x18c +#define ANACTRL_MPLL_CTRL4 0x190 +#define ANACTRL_MPLL_CTRL5 0x194 +#define ANACTRL_MPLL_CTRL6 0x198 +#define ANACTRL_MPLL_CTRL7 0x19c +#define ANACTRL_MPLL_CTRL8 0x1a0 +#define ANACTRL_MPLL_STS 0x1a4 +#define ANACTRL_HDMIPLL_CTRL0 0x1c0 +#define ANACTRL_HDMIPLL_CTRL1 0x1c4 +#define ANACTRL_HDMIPLL_CTRL2 0x1c8 +#define ANACTRL_HDMIPLL_CTRL3 0x1cc +#define ANACTRL_HDMIPLL_CTRL4 0x1d0 +#define ANACTRL_HDMIPLL_CTRL5 0x1d4 +#define ANACTRL_HDMIPLL_CTRL6 0x1d8 +#define ANACTRL_HDMIPLL_STS 0x1dc +#define ANACTRL_HDMIPLL_VLOCK 0x1e4 + +/* + * CLKID index values + * + * These indices are entirely contrived and do not map onto the hardware. + * It has now been decided to expose everything by default in the DT header: + * include/dt-bindings/clock/axg-clkc.h. Only the clocks ids we don't want + * to expose, such as the internal muxes and dividers of composite clocks, + * will remain defined here. + */ +#define CLKID_FIXED_PLL_DCO 0 +#define CLKID_FCLK_DIV2_DIV 2 +#define CLKID_FCLK_DIV3_DIV 4 +#define CLKID_FCLK_DIV4_DIV 6 +#define CLKID_FCLK_DIV5_DIV 8 +#define CLKID_FCLK_DIV7_DIV 10 +#define CLKID_FCLK_DIV2P5_DIV 12 +#define CLKID_GP0_PLL_DCO 14 +#define CLKID_HIFI_PLL_DCO 16 +#define CLKID_HDMI_PLL_DCO 18 +#define CLKID_HDMI_PLL_OD 19 +#define CLKID_MPLL_50M_DIV 21 +#define CLKID_MPLL_PREDIV 23 +#define CLKID_MPLL0_DIV 24 +#define CLKID_MPLL1_DIV 26 +#define CLKID_MPLL2_DIV 28 +#define CLKID_MPLL3_DIV 30 + +#define NR_PLL_CLKS 32 +/* include the CLKIDs that have been made part of the DT binding */ +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> + +#endif /* __MESON_S4_PLL_H__ */ diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h new file mode 100644 index 000000000000..345f87023886 --- /dev/null +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. + * Author: Yu Tu <yu.tu@amlogic.com> + */ + +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H + +/* + * CLKID index values + */ + +#define CLKID_FIXED_PLL 1 +#define CLKID_FCLK_DIV2 3 +#define CLKID_FCLK_DIV3 5 +#define CLKID_FCLK_DIV4 7 +#define CLKID_FCLK_DIV5 9 +#define CLKID_FCLK_DIV7 11 +#define CLKID_FCLK_DIV2P5 13 +#define CLKID_GP0_PLL 15 +#define CLKID_HIFI_PLL 17 +#define CLKID_HDMI_PLL 20 +#define CLKID_MPLL_50M 22 +#define CLKID_MPLL0 25 +#define CLKID_MPLL1 27 +#define CLKID_MPLL2 29 +#define CLKID_MPLL3 31 + +#endif /* _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H */ -- 2.33.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings 2022-11-23 2:13 ` Yu Tu (?) @ 2022-11-23 10:08 ` Krzysztof Kozlowski -1 siblings, 0 replies; 109+ messages in thread From: Krzysztof Kozlowski @ 2022-11-23 10:08 UTC (permalink / raw) To: Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 03:13, Yu Tu wrote: > Add the S4 PLL clock controller found and bindings in the s4 SoC family. > > Signed-off-by: Yu Tu <yu.tu@amlogic.com> > --- > .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + This is v5 and still bindings are here? Bindings are always separate patches. Use subject prefixes matching the subsystem (git log --oneline -- ...). And this was split, wasn't it? What happened here?!? > MAINTAINERS | 1 + > drivers/clk/meson/Kconfig | 13 + > drivers/clk/meson/Makefile | 1 + > drivers/clk/meson/s4-pll.c | 875 ++++++++++++++++++ > drivers/clk/meson/s4-pll.h | 88 ++ > .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + > 7 files changed, 1059 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml > create mode 100644 drivers/clk/meson/s4-pll.c > create mode 100644 drivers/clk/meson/s4-pll.h > create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h > > diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml > new file mode 100644 > index 000000000000..fd517e8ef14f > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml > @@ -0,0 +1,51 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Amlogic Meson S serials PLL Clock Controller > + > +maintainers: > + - Neil Armstrong <narmstrong@baylibre.com> > + - Jerome Brunet <jbrunet@baylibre.com> > + - Yu Tu <yu.hu@amlogic.com> > + One blank line. > + > +properties: > + compatible: > + const: amlogic,s4-pll-clkc > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > + clock-names: > + items: > + - const: xtal > + > + "#clock-cells": > + const: 1 > + > +required: > + - compatible > + - reg > + - clocks > + - clock-names > + - "#clock-cells" > + > +additionalProperties: false > + > +examples: > + - | > + clkc_pll: clock-controller@fe008000 { > + compatible = "amlogic,s4-pll-clkc"; > + reg = <0xfe008000 0x1e8>; > + clocks = <&xtal>; > + clock-names = "xtal"; > + #clock-cells = <1>; > + }; > +#endif /* __MESON_S4_PLL_H__ */ > diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h > new file mode 100644 > index 000000000000..345f87023886 > --- /dev/null > +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h This belongs to bindings patch, not driver. > @@ -0,0 +1,30 @@ > +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ > +/* > + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. > + * Author: Yu Tu <yu.tu@amlogic.com> > + */ > + > +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H > +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H > + > +/* > + * CLKID index values > + */ > + > +#define CLKID_FIXED_PLL 1 > +#define CLKID_FCLK_DIV2 3 Indexes start from 0 and are incremented by 1. Not by 2. NAK. Best regards, Krzysztof _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings @ 2022-11-23 10:08 ` Krzysztof Kozlowski 0 siblings, 0 replies; 109+ messages in thread From: Krzysztof Kozlowski @ 2022-11-23 10:08 UTC (permalink / raw) To: Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 03:13, Yu Tu wrote: > Add the S4 PLL clock controller found and bindings in the s4 SoC family. > > Signed-off-by: Yu Tu <yu.tu@amlogic.com> > --- > .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + This is v5 and still bindings are here? Bindings are always separate patches. Use subject prefixes matching the subsystem (git log --oneline -- ...). And this was split, wasn't it? What happened here?!? > MAINTAINERS | 1 + > drivers/clk/meson/Kconfig | 13 + > drivers/clk/meson/Makefile | 1 + > drivers/clk/meson/s4-pll.c | 875 ++++++++++++++++++ > drivers/clk/meson/s4-pll.h | 88 ++ > .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + > 7 files changed, 1059 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml > create mode 100644 drivers/clk/meson/s4-pll.c > create mode 100644 drivers/clk/meson/s4-pll.h > create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h > > diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml > new file mode 100644 > index 000000000000..fd517e8ef14f > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml > @@ -0,0 +1,51 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Amlogic Meson S serials PLL Clock Controller > + > +maintainers: > + - Neil Armstrong <narmstrong@baylibre.com> > + - Jerome Brunet <jbrunet@baylibre.com> > + - Yu Tu <yu.hu@amlogic.com> > + One blank line. > + > +properties: > + compatible: > + const: amlogic,s4-pll-clkc > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > + clock-names: > + items: > + - const: xtal > + > + "#clock-cells": > + const: 1 > + > +required: > + - compatible > + - reg > + - clocks > + - clock-names > + - "#clock-cells" > + > +additionalProperties: false > + > +examples: > + - | > + clkc_pll: clock-controller@fe008000 { > + compatible = "amlogic,s4-pll-clkc"; > + reg = <0xfe008000 0x1e8>; > + clocks = <&xtal>; > + clock-names = "xtal"; > + #clock-cells = <1>; > + }; > +#endif /* __MESON_S4_PLL_H__ */ > diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h > new file mode 100644 > index 000000000000..345f87023886 > --- /dev/null > +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h This belongs to bindings patch, not driver. > @@ -0,0 +1,30 @@ > +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ > +/* > + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. > + * Author: Yu Tu <yu.tu@amlogic.com> > + */ > + > +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H > +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H > + > +/* > + * CLKID index values > + */ > + > +#define CLKID_FIXED_PLL 1 > +#define CLKID_FCLK_DIV2 3 Indexes start from 0 and are incremented by 1. Not by 2. NAK. Best regards, Krzysztof ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings @ 2022-11-23 10:08 ` Krzysztof Kozlowski 0 siblings, 0 replies; 109+ messages in thread From: Krzysztof Kozlowski @ 2022-11-23 10:08 UTC (permalink / raw) To: Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 03:13, Yu Tu wrote: > Add the S4 PLL clock controller found and bindings in the s4 SoC family. > > Signed-off-by: Yu Tu <yu.tu@amlogic.com> > --- > .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + This is v5 and still bindings are here? Bindings are always separate patches. Use subject prefixes matching the subsystem (git log --oneline -- ...). And this was split, wasn't it? What happened here?!? > MAINTAINERS | 1 + > drivers/clk/meson/Kconfig | 13 + > drivers/clk/meson/Makefile | 1 + > drivers/clk/meson/s4-pll.c | 875 ++++++++++++++++++ > drivers/clk/meson/s4-pll.h | 88 ++ > .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + > 7 files changed, 1059 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml > create mode 100644 drivers/clk/meson/s4-pll.c > create mode 100644 drivers/clk/meson/s4-pll.h > create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h > > diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml > new file mode 100644 > index 000000000000..fd517e8ef14f > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml > @@ -0,0 +1,51 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Amlogic Meson S serials PLL Clock Controller > + > +maintainers: > + - Neil Armstrong <narmstrong@baylibre.com> > + - Jerome Brunet <jbrunet@baylibre.com> > + - Yu Tu <yu.hu@amlogic.com> > + One blank line. > + > +properties: > + compatible: > + const: amlogic,s4-pll-clkc > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > + clock-names: > + items: > + - const: xtal > + > + "#clock-cells": > + const: 1 > + > +required: > + - compatible > + - reg > + - clocks > + - clock-names > + - "#clock-cells" > + > +additionalProperties: false > + > +examples: > + - | > + clkc_pll: clock-controller@fe008000 { > + compatible = "amlogic,s4-pll-clkc"; > + reg = <0xfe008000 0x1e8>; > + clocks = <&xtal>; > + clock-names = "xtal"; > + #clock-cells = <1>; > + }; > +#endif /* __MESON_S4_PLL_H__ */ > diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h > new file mode 100644 > index 000000000000..345f87023886 > --- /dev/null > +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h This belongs to bindings patch, not driver. > @@ -0,0 +1,30 @@ > +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ > +/* > + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. > + * Author: Yu Tu <yu.tu@amlogic.com> > + */ > + > +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H > +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H > + > +/* > + * CLKID index values > + */ > + > +#define CLKID_FIXED_PLL 1 > +#define CLKID_FCLK_DIV2 3 Indexes start from 0 and are incremented by 1. Not by 2. NAK. Best regards, Krzysztof _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings 2022-11-23 10:08 ` Krzysztof Kozlowski (?) @ 2022-11-23 11:16 ` Yu Tu -1 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 11:16 UTC (permalink / raw) To: Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang Hi Krzysztof, Thank you for your reply. On 2022/11/23 18:08, Krzysztof Kozlowski wrote: > [ EXTERNAL EMAIL ] > > On 23/11/2022 03:13, Yu Tu wrote: >> Add the S4 PLL clock controller found and bindings in the s4 SoC family. >> >> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >> --- >> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + > > This is v5 and still bindings are here? Bindings are always separate > patches. Use subject prefixes matching the subsystem (git log --oneline > -- ...). > > And this was split, wasn't it? What happened here?!? Put bindings and clock driver patch together from Jerome. Maybe you can read this chat history. https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ > > >> MAINTAINERS | 1 + >> drivers/clk/meson/Kconfig | 13 + >> drivers/clk/meson/Makefile | 1 + >> drivers/clk/meson/s4-pll.c | 875 ++++++++++++++++++ >> drivers/clk/meson/s4-pll.h | 88 ++ >> .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + >> 7 files changed, 1059 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >> create mode 100644 drivers/clk/meson/s4-pll.c >> create mode 100644 drivers/clk/meson/s4-pll.h >> create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h >> >> diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >> new file mode 100644 >> index 000000000000..fd517e8ef14f >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >> @@ -0,0 +1,51 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Amlogic Meson S serials PLL Clock Controller >> + >> +maintainers: >> + - Neil Armstrong <narmstrong@baylibre.com> >> + - Jerome Brunet <jbrunet@baylibre.com> >> + - Yu Tu <yu.hu@amlogic.com> >> + > One blank line. I will delete this, on next version patch. > >> + >> +properties: >> + compatible: >> + const: amlogic,s4-pll-clkc >> + >> + reg: >> + maxItems: 1 >> + >> + clocks: >> + maxItems: 1 >> + >> + clock-names: >> + items: >> + - const: xtal >> + >> + "#clock-cells": >> + const: 1 >> + >> +required: >> + - compatible >> + - reg >> + - clocks >> + - clock-names >> + - "#clock-cells" >> + >> +additionalProperties: false >> + >> +examples: >> + - | >> + clkc_pll: clock-controller@fe008000 { >> + compatible = "amlogic,s4-pll-clkc"; >> + reg = <0xfe008000 0x1e8>; >> + clocks = <&xtal>; >> + clock-names = "xtal"; >> + #clock-cells = <1>; >> + }; > > >> +#endif /* __MESON_S4_PLL_H__ */ >> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >> new file mode 100644 >> index 000000000000..345f87023886 >> --- /dev/null >> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h > > This belongs to bindings patch, not driver. > >> @@ -0,0 +1,30 @@ >> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >> +/* >> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >> + * Author: Yu Tu <yu.tu@amlogic.com> >> + */ >> + >> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >> + >> +/* >> + * CLKID index values >> + */ >> + >> +#define CLKID_FIXED_PLL 1 >> +#define CLKID_FCLK_DIV2 3 > > Indexes start from 0 and are incremented by 1. Not by 2. > > NAK. I remember Jerome discussing this with you.You can look at this submission history. https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ > > Best regards, > Krzysztof > > . _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings @ 2022-11-23 11:16 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 11:16 UTC (permalink / raw) To: Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang Hi Krzysztof, Thank you for your reply. On 2022/11/23 18:08, Krzysztof Kozlowski wrote: > [ EXTERNAL EMAIL ] > > On 23/11/2022 03:13, Yu Tu wrote: >> Add the S4 PLL clock controller found and bindings in the s4 SoC family. >> >> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >> --- >> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + > > This is v5 and still bindings are here? Bindings are always separate > patches. Use subject prefixes matching the subsystem (git log --oneline > -- ...). > > And this was split, wasn't it? What happened here?!? Put bindings and clock driver patch together from Jerome. Maybe you can read this chat history. https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ > > >> MAINTAINERS | 1 + >> drivers/clk/meson/Kconfig | 13 + >> drivers/clk/meson/Makefile | 1 + >> drivers/clk/meson/s4-pll.c | 875 ++++++++++++++++++ >> drivers/clk/meson/s4-pll.h | 88 ++ >> .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + >> 7 files changed, 1059 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >> create mode 100644 drivers/clk/meson/s4-pll.c >> create mode 100644 drivers/clk/meson/s4-pll.h >> create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h >> >> diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >> new file mode 100644 >> index 000000000000..fd517e8ef14f >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >> @@ -0,0 +1,51 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Amlogic Meson S serials PLL Clock Controller >> + >> +maintainers: >> + - Neil Armstrong <narmstrong@baylibre.com> >> + - Jerome Brunet <jbrunet@baylibre.com> >> + - Yu Tu <yu.hu@amlogic.com> >> + > One blank line. I will delete this, on next version patch. > >> + >> +properties: >> + compatible: >> + const: amlogic,s4-pll-clkc >> + >> + reg: >> + maxItems: 1 >> + >> + clocks: >> + maxItems: 1 >> + >> + clock-names: >> + items: >> + - const: xtal >> + >> + "#clock-cells": >> + const: 1 >> + >> +required: >> + - compatible >> + - reg >> + - clocks >> + - clock-names >> + - "#clock-cells" >> + >> +additionalProperties: false >> + >> +examples: >> + - | >> + clkc_pll: clock-controller@fe008000 { >> + compatible = "amlogic,s4-pll-clkc"; >> + reg = <0xfe008000 0x1e8>; >> + clocks = <&xtal>; >> + clock-names = "xtal"; >> + #clock-cells = <1>; >> + }; > > >> +#endif /* __MESON_S4_PLL_H__ */ >> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >> new file mode 100644 >> index 000000000000..345f87023886 >> --- /dev/null >> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h > > This belongs to bindings patch, not driver. > >> @@ -0,0 +1,30 @@ >> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >> +/* >> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >> + * Author: Yu Tu <yu.tu@amlogic.com> >> + */ >> + >> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >> + >> +/* >> + * CLKID index values >> + */ >> + >> +#define CLKID_FIXED_PLL 1 >> +#define CLKID_FCLK_DIV2 3 > > Indexes start from 0 and are incremented by 1. Not by 2. > > NAK. I remember Jerome discussing this with you.You can look at this submission history. https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ > > Best regards, > Krzysztof > > . _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings @ 2022-11-23 11:16 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 11:16 UTC (permalink / raw) To: Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang Hi Krzysztof, Thank you for your reply. On 2022/11/23 18:08, Krzysztof Kozlowski wrote: > [ EXTERNAL EMAIL ] > > On 23/11/2022 03:13, Yu Tu wrote: >> Add the S4 PLL clock controller found and bindings in the s4 SoC family. >> >> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >> --- >> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + > > This is v5 and still bindings are here? Bindings are always separate > patches. Use subject prefixes matching the subsystem (git log --oneline > -- ...). > > And this was split, wasn't it? What happened here?!? Put bindings and clock driver patch together from Jerome. Maybe you can read this chat history. https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ > > >> MAINTAINERS | 1 + >> drivers/clk/meson/Kconfig | 13 + >> drivers/clk/meson/Makefile | 1 + >> drivers/clk/meson/s4-pll.c | 875 ++++++++++++++++++ >> drivers/clk/meson/s4-pll.h | 88 ++ >> .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + >> 7 files changed, 1059 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >> create mode 100644 drivers/clk/meson/s4-pll.c >> create mode 100644 drivers/clk/meson/s4-pll.h >> create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h >> >> diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >> new file mode 100644 >> index 000000000000..fd517e8ef14f >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >> @@ -0,0 +1,51 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Amlogic Meson S serials PLL Clock Controller >> + >> +maintainers: >> + - Neil Armstrong <narmstrong@baylibre.com> >> + - Jerome Brunet <jbrunet@baylibre.com> >> + - Yu Tu <yu.hu@amlogic.com> >> + > One blank line. I will delete this, on next version patch. > >> + >> +properties: >> + compatible: >> + const: amlogic,s4-pll-clkc >> + >> + reg: >> + maxItems: 1 >> + >> + clocks: >> + maxItems: 1 >> + >> + clock-names: >> + items: >> + - const: xtal >> + >> + "#clock-cells": >> + const: 1 >> + >> +required: >> + - compatible >> + - reg >> + - clocks >> + - clock-names >> + - "#clock-cells" >> + >> +additionalProperties: false >> + >> +examples: >> + - | >> + clkc_pll: clock-controller@fe008000 { >> + compatible = "amlogic,s4-pll-clkc"; >> + reg = <0xfe008000 0x1e8>; >> + clocks = <&xtal>; >> + clock-names = "xtal"; >> + #clock-cells = <1>; >> + }; > > >> +#endif /* __MESON_S4_PLL_H__ */ >> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >> new file mode 100644 >> index 000000000000..345f87023886 >> --- /dev/null >> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h > > This belongs to bindings patch, not driver. > >> @@ -0,0 +1,30 @@ >> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >> +/* >> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >> + * Author: Yu Tu <yu.tu@amlogic.com> >> + */ >> + >> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >> + >> +/* >> + * CLKID index values >> + */ >> + >> +#define CLKID_FIXED_PLL 1 >> +#define CLKID_FCLK_DIV2 3 > > Indexes start from 0 and are incremented by 1. Not by 2. > > NAK. I remember Jerome discussing this with you.You can look at this submission history. https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ > > Best regards, > Krzysztof > > . ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings 2022-11-23 11:16 ` Yu Tu (?) @ 2022-11-23 13:05 ` Krzysztof Kozlowski -1 siblings, 0 replies; 109+ messages in thread From: Krzysztof Kozlowski @ 2022-11-23 13:05 UTC (permalink / raw) To: Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 12:16, Yu Tu wrote: > Hi Krzysztof, > Thank you for your reply. > > On 2022/11/23 18:08, Krzysztof Kozlowski wrote: >> [ EXTERNAL EMAIL ] >> >> On 23/11/2022 03:13, Yu Tu wrote: >>> Add the S4 PLL clock controller found and bindings in the s4 SoC family. >>> >>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>> --- >>> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + >> >> This is v5 and still bindings are here? Bindings are always separate >> patches. Use subject prefixes matching the subsystem (git log --oneline >> -- ...). >> >> And this was split, wasn't it? What happened here?!? > > Put bindings and clock driver patch together from Jerome. Maybe you can > read this chat history. > https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ Link does not explain me anything. It mentions series, which is totally different than mixing it one patch! Anyway you should have warnings from checkpatch. Bindings are always separate patches. (...) >> >>> + >>> +properties: >>> + compatible: >>> + const: amlogic,s4-pll-clkc >>> + >>> + reg: >>> + maxItems: 1 >>> + >>> + clocks: >>> + maxItems: 1 >>> + >>> + clock-names: >>> + items: >>> + - const: xtal >>> + >>> + "#clock-cells": >>> + const: 1 >>> + >>> +required: >>> + - compatible >>> + - reg >>> + - clocks >>> + - clock-names >>> + - "#clock-cells" >>> + >>> +additionalProperties: false >>> + >>> +examples: >>> + - | >>> + clkc_pll: clock-controller@fe008000 { >>> + compatible = "amlogic,s4-pll-clkc"; >>> + reg = <0xfe008000 0x1e8>; >>> + clocks = <&xtal>; >>> + clock-names = "xtal"; >>> + #clock-cells = <1>; >>> + }; >> >> >>> +#endif /* __MESON_S4_PLL_H__ */ >>> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>> new file mode 100644 >>> index 000000000000..345f87023886 >>> --- /dev/null >>> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >> >> This belongs to bindings patch, not driver. >> >>> @@ -0,0 +1,30 @@ >>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >>> +/* >>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >>> + * Author: Yu Tu <yu.tu@amlogic.com> >>> + */ >>> + >>> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>> + >>> +/* >>> + * CLKID index values >>> + */ >>> + >>> +#define CLKID_FIXED_PLL 1 >>> +#define CLKID_FCLK_DIV2 3 >> >> Indexes start from 0 and are incremented by 1. Not by 2. >> >> NAK. > > I remember Jerome discussing this with you.You can look at this > submission history. > https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ You pointed to my arguments, so what is this proving? That you ignored feedback? Or was there some other mail? Best regards, Krzysztof _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings @ 2022-11-23 13:05 ` Krzysztof Kozlowski 0 siblings, 0 replies; 109+ messages in thread From: Krzysztof Kozlowski @ 2022-11-23 13:05 UTC (permalink / raw) To: Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 12:16, Yu Tu wrote: > Hi Krzysztof, > Thank you for your reply. > > On 2022/11/23 18:08, Krzysztof Kozlowski wrote: >> [ EXTERNAL EMAIL ] >> >> On 23/11/2022 03:13, Yu Tu wrote: >>> Add the S4 PLL clock controller found and bindings in the s4 SoC family. >>> >>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>> --- >>> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + >> >> This is v5 and still bindings are here? Bindings are always separate >> patches. Use subject prefixes matching the subsystem (git log --oneline >> -- ...). >> >> And this was split, wasn't it? What happened here?!? > > Put bindings and clock driver patch together from Jerome. Maybe you can > read this chat history. > https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ Link does not explain me anything. It mentions series, which is totally different than mixing it one patch! Anyway you should have warnings from checkpatch. Bindings are always separate patches. (...) >> >>> + >>> +properties: >>> + compatible: >>> + const: amlogic,s4-pll-clkc >>> + >>> + reg: >>> + maxItems: 1 >>> + >>> + clocks: >>> + maxItems: 1 >>> + >>> + clock-names: >>> + items: >>> + - const: xtal >>> + >>> + "#clock-cells": >>> + const: 1 >>> + >>> +required: >>> + - compatible >>> + - reg >>> + - clocks >>> + - clock-names >>> + - "#clock-cells" >>> + >>> +additionalProperties: false >>> + >>> +examples: >>> + - | >>> + clkc_pll: clock-controller@fe008000 { >>> + compatible = "amlogic,s4-pll-clkc"; >>> + reg = <0xfe008000 0x1e8>; >>> + clocks = <&xtal>; >>> + clock-names = "xtal"; >>> + #clock-cells = <1>; >>> + }; >> >> >>> +#endif /* __MESON_S4_PLL_H__ */ >>> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>> new file mode 100644 >>> index 000000000000..345f87023886 >>> --- /dev/null >>> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >> >> This belongs to bindings patch, not driver. >> >>> @@ -0,0 +1,30 @@ >>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >>> +/* >>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >>> + * Author: Yu Tu <yu.tu@amlogic.com> >>> + */ >>> + >>> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>> + >>> +/* >>> + * CLKID index values >>> + */ >>> + >>> +#define CLKID_FIXED_PLL 1 >>> +#define CLKID_FCLK_DIV2 3 >> >> Indexes start from 0 and are incremented by 1. Not by 2. >> >> NAK. > > I remember Jerome discussing this with you.You can look at this > submission history. > https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ You pointed to my arguments, so what is this proving? That you ignored feedback? Or was there some other mail? Best regards, Krzysztof ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings @ 2022-11-23 13:05 ` Krzysztof Kozlowski 0 siblings, 0 replies; 109+ messages in thread From: Krzysztof Kozlowski @ 2022-11-23 13:05 UTC (permalink / raw) To: Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 12:16, Yu Tu wrote: > Hi Krzysztof, > Thank you for your reply. > > On 2022/11/23 18:08, Krzysztof Kozlowski wrote: >> [ EXTERNAL EMAIL ] >> >> On 23/11/2022 03:13, Yu Tu wrote: >>> Add the S4 PLL clock controller found and bindings in the s4 SoC family. >>> >>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>> --- >>> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + >> >> This is v5 and still bindings are here? Bindings are always separate >> patches. Use subject prefixes matching the subsystem (git log --oneline >> -- ...). >> >> And this was split, wasn't it? What happened here?!? > > Put bindings and clock driver patch together from Jerome. Maybe you can > read this chat history. > https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ Link does not explain me anything. It mentions series, which is totally different than mixing it one patch! Anyway you should have warnings from checkpatch. Bindings are always separate patches. (...) >> >>> + >>> +properties: >>> + compatible: >>> + const: amlogic,s4-pll-clkc >>> + >>> + reg: >>> + maxItems: 1 >>> + >>> + clocks: >>> + maxItems: 1 >>> + >>> + clock-names: >>> + items: >>> + - const: xtal >>> + >>> + "#clock-cells": >>> + const: 1 >>> + >>> +required: >>> + - compatible >>> + - reg >>> + - clocks >>> + - clock-names >>> + - "#clock-cells" >>> + >>> +additionalProperties: false >>> + >>> +examples: >>> + - | >>> + clkc_pll: clock-controller@fe008000 { >>> + compatible = "amlogic,s4-pll-clkc"; >>> + reg = <0xfe008000 0x1e8>; >>> + clocks = <&xtal>; >>> + clock-names = "xtal"; >>> + #clock-cells = <1>; >>> + }; >> >> >>> +#endif /* __MESON_S4_PLL_H__ */ >>> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>> new file mode 100644 >>> index 000000000000..345f87023886 >>> --- /dev/null >>> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >> >> This belongs to bindings patch, not driver. >> >>> @@ -0,0 +1,30 @@ >>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >>> +/* >>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >>> + * Author: Yu Tu <yu.tu@amlogic.com> >>> + */ >>> + >>> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>> + >>> +/* >>> + * CLKID index values >>> + */ >>> + >>> +#define CLKID_FIXED_PLL 1 >>> +#define CLKID_FCLK_DIV2 3 >> >> Indexes start from 0 and are incremented by 1. Not by 2. >> >> NAK. > > I remember Jerome discussing this with you.You can look at this > submission history. > https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ You pointed to my arguments, so what is this proving? That you ignored feedback? Or was there some other mail? Best regards, Krzysztof _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings 2022-11-23 11:16 ` Yu Tu (?) @ 2022-11-23 13:23 ` Neil Armstrong -1 siblings, 0 replies; 109+ messages in thread From: Neil Armstrong @ 2022-11-23 13:23 UTC (permalink / raw) To: Yu Tu, Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang Hi, On 23/11/2022 12:16, Yu Tu wrote: > Hi Krzysztof, > Thank you for your reply. > > On 2022/11/23 18:08, Krzysztof Kozlowski wrote: >> [ EXTERNAL EMAIL ] >> >> On 23/11/2022 03:13, Yu Tu wrote: >>> Add the S4 PLL clock controller found and bindings in the s4 SoC family. >>> >>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>> --- >>> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + >> >> This is v5 and still bindings are here? Bindings are always separate >> patches. Use subject prefixes matching the subsystem (git log --oneline >> -- ...). >> >> And this was split, wasn't it? What happened here?!? > > Put bindings and clock driver patch together from Jerome. Maybe you can read this chat history. > https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ Jerome was asking you to send 2 patchsets, one with : - bindings in separate patches - drivers in separate patches and a second with DT changes. Then when the bindings + clocks patches are merged, a pull request of the bindings can be done to me so I can merge it with DT. > >> >> >>> MAINTAINERS | 1 + >>> drivers/clk/meson/Kconfig | 13 + >>> drivers/clk/meson/Makefile | 1 + >>> drivers/clk/meson/s4-pll.c | 875 ++++++++++++++++++ >>> drivers/clk/meson/s4-pll.h | 88 ++ >>> .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + >>> 7 files changed, 1059 insertions(+) >>> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>> create mode 100644 drivers/clk/meson/s4-pll.c >>> create mode 100644 drivers/clk/meson/s4-pll.h >>> create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>> >>> diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>> new file mode 100644 >>> index 000000000000..fd517e8ef14f >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>> @@ -0,0 +1,51 @@ >>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>> +%YAML 1.2 >>> +--- >>> +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# >>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>> + >>> +title: Amlogic Meson S serials PLL Clock Controller >>> + >>> +maintainers: >>> + - Neil Armstrong <narmstrong@baylibre.com> >>> + - Jerome Brunet <jbrunet@baylibre.com> >>> + - Yu Tu <yu.hu@amlogic.com> >>> + >> One blank line. > > I will delete this, on next version patch. > >> >>> + >>> +properties: >>> + compatible: >>> + const: amlogic,s4-pll-clkc >>> + >>> + reg: >>> + maxItems: 1 >>> + >>> + clocks: >>> + maxItems: 1 >>> + >>> + clock-names: >>> + items: >>> + - const: xtal >>> + >>> + "#clock-cells": >>> + const: 1 >>> + >>> +required: >>> + - compatible >>> + - reg >>> + - clocks >>> + - clock-names >>> + - "#clock-cells" >>> + >>> +additionalProperties: false >>> + >>> +examples: >>> + - | >>> + clkc_pll: clock-controller@fe008000 { >>> + compatible = "amlogic,s4-pll-clkc"; >>> + reg = <0xfe008000 0x1e8>; >>> + clocks = <&xtal>; >>> + clock-names = "xtal"; >>> + #clock-cells = <1>; >>> + }; >> >> >>> +#endif /* __MESON_S4_PLL_H__ */ >>> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>> new file mode 100644 >>> index 000000000000..345f87023886 >>> --- /dev/null >>> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >> >> This belongs to bindings patch, not driver. >> >>> @@ -0,0 +1,30 @@ >>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >>> +/* >>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >>> + * Author: Yu Tu <yu.tu@amlogic.com> >>> + */ >>> + >>> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>> + >>> +/* >>> + * CLKID index values >>> + */ >>> + >>> +#define CLKID_FIXED_PLL 1 >>> +#define CLKID_FCLK_DIV2 3 >> >> Indexes start from 0 and are incremented by 1. Not by 2. >> >> NAK. > > I remember Jerome discussing this with you.You can look at this submission history. > https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ Historically we did that by only exposing part of the numbers, controlling which clocks were part of the bindings. But it seems this doesn't make sens anymore, maybe it would be time to put all the clock ids in the bindings for this new SoC and break with the previous strategy. Neil > >> >> Best regards, >> Krzysztof >> >> . _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings @ 2022-11-23 13:23 ` Neil Armstrong 0 siblings, 0 replies; 109+ messages in thread From: Neil Armstrong @ 2022-11-23 13:23 UTC (permalink / raw) To: Yu Tu, Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang Hi, On 23/11/2022 12:16, Yu Tu wrote: > Hi Krzysztof, > Thank you for your reply. > > On 2022/11/23 18:08, Krzysztof Kozlowski wrote: >> [ EXTERNAL EMAIL ] >> >> On 23/11/2022 03:13, Yu Tu wrote: >>> Add the S4 PLL clock controller found and bindings in the s4 SoC family. >>> >>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>> --- >>> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + >> >> This is v5 and still bindings are here? Bindings are always separate >> patches. Use subject prefixes matching the subsystem (git log --oneline >> -- ...). >> >> And this was split, wasn't it? What happened here?!? > > Put bindings and clock driver patch together from Jerome. Maybe you can read this chat history. > https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ Jerome was asking you to send 2 patchsets, one with : - bindings in separate patches - drivers in separate patches and a second with DT changes. Then when the bindings + clocks patches are merged, a pull request of the bindings can be done to me so I can merge it with DT. > >> >> >>> MAINTAINERS | 1 + >>> drivers/clk/meson/Kconfig | 13 + >>> drivers/clk/meson/Makefile | 1 + >>> drivers/clk/meson/s4-pll.c | 875 ++++++++++++++++++ >>> drivers/clk/meson/s4-pll.h | 88 ++ >>> .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + >>> 7 files changed, 1059 insertions(+) >>> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>> create mode 100644 drivers/clk/meson/s4-pll.c >>> create mode 100644 drivers/clk/meson/s4-pll.h >>> create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>> >>> diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>> new file mode 100644 >>> index 000000000000..fd517e8ef14f >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>> @@ -0,0 +1,51 @@ >>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>> +%YAML 1.2 >>> +--- >>> +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# >>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>> + >>> +title: Amlogic Meson S serials PLL Clock Controller >>> + >>> +maintainers: >>> + - Neil Armstrong <narmstrong@baylibre.com> >>> + - Jerome Brunet <jbrunet@baylibre.com> >>> + - Yu Tu <yu.hu@amlogic.com> >>> + >> One blank line. > > I will delete this, on next version patch. > >> >>> + >>> +properties: >>> + compatible: >>> + const: amlogic,s4-pll-clkc >>> + >>> + reg: >>> + maxItems: 1 >>> + >>> + clocks: >>> + maxItems: 1 >>> + >>> + clock-names: >>> + items: >>> + - const: xtal >>> + >>> + "#clock-cells": >>> + const: 1 >>> + >>> +required: >>> + - compatible >>> + - reg >>> + - clocks >>> + - clock-names >>> + - "#clock-cells" >>> + >>> +additionalProperties: false >>> + >>> +examples: >>> + - | >>> + clkc_pll: clock-controller@fe008000 { >>> + compatible = "amlogic,s4-pll-clkc"; >>> + reg = <0xfe008000 0x1e8>; >>> + clocks = <&xtal>; >>> + clock-names = "xtal"; >>> + #clock-cells = <1>; >>> + }; >> >> >>> +#endif /* __MESON_S4_PLL_H__ */ >>> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>> new file mode 100644 >>> index 000000000000..345f87023886 >>> --- /dev/null >>> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >> >> This belongs to bindings patch, not driver. >> >>> @@ -0,0 +1,30 @@ >>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >>> +/* >>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >>> + * Author: Yu Tu <yu.tu@amlogic.com> >>> + */ >>> + >>> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>> + >>> +/* >>> + * CLKID index values >>> + */ >>> + >>> +#define CLKID_FIXED_PLL 1 >>> +#define CLKID_FCLK_DIV2 3 >> >> Indexes start from 0 and are incremented by 1. Not by 2. >> >> NAK. > > I remember Jerome discussing this with you.You can look at this submission history. > https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ Historically we did that by only exposing part of the numbers, controlling which clocks were part of the bindings. But it seems this doesn't make sens anymore, maybe it would be time to put all the clock ids in the bindings for this new SoC and break with the previous strategy. Neil > >> >> Best regards, >> Krzysztof >> >> . ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings @ 2022-11-23 13:23 ` Neil Armstrong 0 siblings, 0 replies; 109+ messages in thread From: Neil Armstrong @ 2022-11-23 13:23 UTC (permalink / raw) To: Yu Tu, Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang Hi, On 23/11/2022 12:16, Yu Tu wrote: > Hi Krzysztof, > Thank you for your reply. > > On 2022/11/23 18:08, Krzysztof Kozlowski wrote: >> [ EXTERNAL EMAIL ] >> >> On 23/11/2022 03:13, Yu Tu wrote: >>> Add the S4 PLL clock controller found and bindings in the s4 SoC family. >>> >>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>> --- >>> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + >> >> This is v5 and still bindings are here? Bindings are always separate >> patches. Use subject prefixes matching the subsystem (git log --oneline >> -- ...). >> >> And this was split, wasn't it? What happened here?!? > > Put bindings and clock driver patch together from Jerome. Maybe you can read this chat history. > https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ Jerome was asking you to send 2 patchsets, one with : - bindings in separate patches - drivers in separate patches and a second with DT changes. Then when the bindings + clocks patches are merged, a pull request of the bindings can be done to me so I can merge it with DT. > >> >> >>> MAINTAINERS | 1 + >>> drivers/clk/meson/Kconfig | 13 + >>> drivers/clk/meson/Makefile | 1 + >>> drivers/clk/meson/s4-pll.c | 875 ++++++++++++++++++ >>> drivers/clk/meson/s4-pll.h | 88 ++ >>> .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + >>> 7 files changed, 1059 insertions(+) >>> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>> create mode 100644 drivers/clk/meson/s4-pll.c >>> create mode 100644 drivers/clk/meson/s4-pll.h >>> create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>> >>> diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>> new file mode 100644 >>> index 000000000000..fd517e8ef14f >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>> @@ -0,0 +1,51 @@ >>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>> +%YAML 1.2 >>> +--- >>> +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# >>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>> + >>> +title: Amlogic Meson S serials PLL Clock Controller >>> + >>> +maintainers: >>> + - Neil Armstrong <narmstrong@baylibre.com> >>> + - Jerome Brunet <jbrunet@baylibre.com> >>> + - Yu Tu <yu.hu@amlogic.com> >>> + >> One blank line. > > I will delete this, on next version patch. > >> >>> + >>> +properties: >>> + compatible: >>> + const: amlogic,s4-pll-clkc >>> + >>> + reg: >>> + maxItems: 1 >>> + >>> + clocks: >>> + maxItems: 1 >>> + >>> + clock-names: >>> + items: >>> + - const: xtal >>> + >>> + "#clock-cells": >>> + const: 1 >>> + >>> +required: >>> + - compatible >>> + - reg >>> + - clocks >>> + - clock-names >>> + - "#clock-cells" >>> + >>> +additionalProperties: false >>> + >>> +examples: >>> + - | >>> + clkc_pll: clock-controller@fe008000 { >>> + compatible = "amlogic,s4-pll-clkc"; >>> + reg = <0xfe008000 0x1e8>; >>> + clocks = <&xtal>; >>> + clock-names = "xtal"; >>> + #clock-cells = <1>; >>> + }; >> >> >>> +#endif /* __MESON_S4_PLL_H__ */ >>> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>> new file mode 100644 >>> index 000000000000..345f87023886 >>> --- /dev/null >>> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >> >> This belongs to bindings patch, not driver. >> >>> @@ -0,0 +1,30 @@ >>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >>> +/* >>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >>> + * Author: Yu Tu <yu.tu@amlogic.com> >>> + */ >>> + >>> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>> + >>> +/* >>> + * CLKID index values >>> + */ >>> + >>> +#define CLKID_FIXED_PLL 1 >>> +#define CLKID_FCLK_DIV2 3 >> >> Indexes start from 0 and are incremented by 1. Not by 2. >> >> NAK. > > I remember Jerome discussing this with you.You can look at this submission history. > https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ Historically we did that by only exposing part of the numbers, controlling which clocks were part of the bindings. But it seems this doesn't make sens anymore, maybe it would be time to put all the clock ids in the bindings for this new SoC and break with the previous strategy. Neil > >> >> Best regards, >> Krzysztof >> >> . _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings 2022-11-23 13:23 ` Neil Armstrong (?) @ 2022-11-23 13:53 ` Krzysztof Kozlowski -1 siblings, 0 replies; 109+ messages in thread From: Krzysztof Kozlowski @ 2022-11-23 13:53 UTC (permalink / raw) To: neil.armstrong, Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 14:23, Neil Armstrong wrote: > Hi, > > On 23/11/2022 12:16, Yu Tu wrote: >> Hi Krzysztof, >> Thank you for your reply. >> >> On 2022/11/23 18:08, Krzysztof Kozlowski wrote: >>> [ EXTERNAL EMAIL ] >>> >>> On 23/11/2022 03:13, Yu Tu wrote: >>>> Add the S4 PLL clock controller found and bindings in the s4 SoC family. >>>> >>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>> --- >>>> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + >>> >>> This is v5 and still bindings are here? Bindings are always separate >>> patches. Use subject prefixes matching the subsystem (git log --oneline >>> -- ...). >>> >>> And this was split, wasn't it? What happened here?!? >> >> Put bindings and clock driver patch together from Jerome. Maybe you can read this chat history. >> https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ > > Jerome was asking you to send 2 patchsets, one with : > - bindings in separate patches > - drivers in separate patches > and a second with DT changes. > > Then when the bindings + clocks patches are merged, a pull request of the bindings > can be done to me so I can merge it with DT. > >> >>> >>> >>>> MAINTAINERS | 1 + >>>> drivers/clk/meson/Kconfig | 13 + >>>> drivers/clk/meson/Makefile | 1 + >>>> drivers/clk/meson/s4-pll.c | 875 ++++++++++++++++++ >>>> drivers/clk/meson/s4-pll.h | 88 ++ >>>> .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + >>>> 7 files changed, 1059 insertions(+) >>>> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>> create mode 100644 drivers/clk/meson/s4-pll.c >>>> create mode 100644 drivers/clk/meson/s4-pll.h >>>> create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>> >>>> diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>> new file mode 100644 >>>> index 000000000000..fd517e8ef14f >>>> --- /dev/null >>>> +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>> @@ -0,0 +1,51 @@ >>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>>> +%YAML 1.2 >>>> +--- >>>> +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# >>>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>>> + >>>> +title: Amlogic Meson S serials PLL Clock Controller >>>> + >>>> +maintainers: >>>> + - Neil Armstrong <narmstrong@baylibre.com> >>>> + - Jerome Brunet <jbrunet@baylibre.com> >>>> + - Yu Tu <yu.hu@amlogic.com> >>>> + >>> One blank line. >> >> I will delete this, on next version patch. >> >>> >>>> + >>>> +properties: >>>> + compatible: >>>> + const: amlogic,s4-pll-clkc >>>> + >>>> + reg: >>>> + maxItems: 1 >>>> + >>>> + clocks: >>>> + maxItems: 1 >>>> + >>>> + clock-names: >>>> + items: >>>> + - const: xtal >>>> + >>>> + "#clock-cells": >>>> + const: 1 >>>> + >>>> +required: >>>> + - compatible >>>> + - reg >>>> + - clocks >>>> + - clock-names >>>> + - "#clock-cells" >>>> + >>>> +additionalProperties: false >>>> + >>>> +examples: >>>> + - | >>>> + clkc_pll: clock-controller@fe008000 { >>>> + compatible = "amlogic,s4-pll-clkc"; >>>> + reg = <0xfe008000 0x1e8>; >>>> + clocks = <&xtal>; >>>> + clock-names = "xtal"; >>>> + #clock-cells = <1>; >>>> + }; >>> >>> >>>> +#endif /* __MESON_S4_PLL_H__ */ >>>> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>> new file mode 100644 >>>> index 000000000000..345f87023886 >>>> --- /dev/null >>>> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>> >>> This belongs to bindings patch, not driver. >>> >>>> @@ -0,0 +1,30 @@ >>>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >>>> +/* >>>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >>>> + * Author: Yu Tu <yu.tu@amlogic.com> >>>> + */ >>>> + >>>> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>> + >>>> +/* >>>> + * CLKID index values >>>> + */ >>>> + >>>> +#define CLKID_FIXED_PLL 1 >>>> +#define CLKID_FCLK_DIV2 3 >>> >>> Indexes start from 0 and are incremented by 1. Not by 2. >>> >>> NAK. >> >> I remember Jerome discussing this with you.You can look at this submission history. >> https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ > > Historically we did that by only exposing part of the numbers, controlling which > clocks were part of the bindings. > > But it seems this doesn't make sens anymore, maybe it would be time to put all the > clock ids in the bindings for this new SoC and break with the previous strategy. So the outcome of the previous discussion was somewhere later in that thread: > It is just a choice to not expose some IDs. > It is not tied to the implementation at all. > I think we actually follow the rules and the idea behind it. Best regards, Krzysztof _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings @ 2022-11-23 13:53 ` Krzysztof Kozlowski 0 siblings, 0 replies; 109+ messages in thread From: Krzysztof Kozlowski @ 2022-11-23 13:53 UTC (permalink / raw) To: neil.armstrong, Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 14:23, Neil Armstrong wrote: > Hi, > > On 23/11/2022 12:16, Yu Tu wrote: >> Hi Krzysztof, >> Thank you for your reply. >> >> On 2022/11/23 18:08, Krzysztof Kozlowski wrote: >>> [ EXTERNAL EMAIL ] >>> >>> On 23/11/2022 03:13, Yu Tu wrote: >>>> Add the S4 PLL clock controller found and bindings in the s4 SoC family. >>>> >>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>> --- >>>> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + >>> >>> This is v5 and still bindings are here? Bindings are always separate >>> patches. Use subject prefixes matching the subsystem (git log --oneline >>> -- ...). >>> >>> And this was split, wasn't it? What happened here?!? >> >> Put bindings and clock driver patch together from Jerome. Maybe you can read this chat history. >> https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ > > Jerome was asking you to send 2 patchsets, one with : > - bindings in separate patches > - drivers in separate patches > and a second with DT changes. > > Then when the bindings + clocks patches are merged, a pull request of the bindings > can be done to me so I can merge it with DT. > >> >>> >>> >>>> MAINTAINERS | 1 + >>>> drivers/clk/meson/Kconfig | 13 + >>>> drivers/clk/meson/Makefile | 1 + >>>> drivers/clk/meson/s4-pll.c | 875 ++++++++++++++++++ >>>> drivers/clk/meson/s4-pll.h | 88 ++ >>>> .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + >>>> 7 files changed, 1059 insertions(+) >>>> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>> create mode 100644 drivers/clk/meson/s4-pll.c >>>> create mode 100644 drivers/clk/meson/s4-pll.h >>>> create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>> >>>> diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>> new file mode 100644 >>>> index 000000000000..fd517e8ef14f >>>> --- /dev/null >>>> +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>> @@ -0,0 +1,51 @@ >>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>>> +%YAML 1.2 >>>> +--- >>>> +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# >>>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>>> + >>>> +title: Amlogic Meson S serials PLL Clock Controller >>>> + >>>> +maintainers: >>>> + - Neil Armstrong <narmstrong@baylibre.com> >>>> + - Jerome Brunet <jbrunet@baylibre.com> >>>> + - Yu Tu <yu.hu@amlogic.com> >>>> + >>> One blank line. >> >> I will delete this, on next version patch. >> >>> >>>> + >>>> +properties: >>>> + compatible: >>>> + const: amlogic,s4-pll-clkc >>>> + >>>> + reg: >>>> + maxItems: 1 >>>> + >>>> + clocks: >>>> + maxItems: 1 >>>> + >>>> + clock-names: >>>> + items: >>>> + - const: xtal >>>> + >>>> + "#clock-cells": >>>> + const: 1 >>>> + >>>> +required: >>>> + - compatible >>>> + - reg >>>> + - clocks >>>> + - clock-names >>>> + - "#clock-cells" >>>> + >>>> +additionalProperties: false >>>> + >>>> +examples: >>>> + - | >>>> + clkc_pll: clock-controller@fe008000 { >>>> + compatible = "amlogic,s4-pll-clkc"; >>>> + reg = <0xfe008000 0x1e8>; >>>> + clocks = <&xtal>; >>>> + clock-names = "xtal"; >>>> + #clock-cells = <1>; >>>> + }; >>> >>> >>>> +#endif /* __MESON_S4_PLL_H__ */ >>>> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>> new file mode 100644 >>>> index 000000000000..345f87023886 >>>> --- /dev/null >>>> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>> >>> This belongs to bindings patch, not driver. >>> >>>> @@ -0,0 +1,30 @@ >>>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >>>> +/* >>>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >>>> + * Author: Yu Tu <yu.tu@amlogic.com> >>>> + */ >>>> + >>>> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>> + >>>> +/* >>>> + * CLKID index values >>>> + */ >>>> + >>>> +#define CLKID_FIXED_PLL 1 >>>> +#define CLKID_FCLK_DIV2 3 >>> >>> Indexes start from 0 and are incremented by 1. Not by 2. >>> >>> NAK. >> >> I remember Jerome discussing this with you.You can look at this submission history. >> https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ > > Historically we did that by only exposing part of the numbers, controlling which > clocks were part of the bindings. > > But it seems this doesn't make sens anymore, maybe it would be time to put all the > clock ids in the bindings for this new SoC and break with the previous strategy. So the outcome of the previous discussion was somewhere later in that thread: > It is just a choice to not expose some IDs. > It is not tied to the implementation at all. > I think we actually follow the rules and the idea behind it. Best regards, Krzysztof ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings @ 2022-11-23 13:53 ` Krzysztof Kozlowski 0 siblings, 0 replies; 109+ messages in thread From: Krzysztof Kozlowski @ 2022-11-23 13:53 UTC (permalink / raw) To: neil.armstrong, Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 14:23, Neil Armstrong wrote: > Hi, > > On 23/11/2022 12:16, Yu Tu wrote: >> Hi Krzysztof, >> Thank you for your reply. >> >> On 2022/11/23 18:08, Krzysztof Kozlowski wrote: >>> [ EXTERNAL EMAIL ] >>> >>> On 23/11/2022 03:13, Yu Tu wrote: >>>> Add the S4 PLL clock controller found and bindings in the s4 SoC family. >>>> >>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>> --- >>>> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + >>> >>> This is v5 and still bindings are here? Bindings are always separate >>> patches. Use subject prefixes matching the subsystem (git log --oneline >>> -- ...). >>> >>> And this was split, wasn't it? What happened here?!? >> >> Put bindings and clock driver patch together from Jerome. Maybe you can read this chat history. >> https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ > > Jerome was asking you to send 2 patchsets, one with : > - bindings in separate patches > - drivers in separate patches > and a second with DT changes. > > Then when the bindings + clocks patches are merged, a pull request of the bindings > can be done to me so I can merge it with DT. > >> >>> >>> >>>> MAINTAINERS | 1 + >>>> drivers/clk/meson/Kconfig | 13 + >>>> drivers/clk/meson/Makefile | 1 + >>>> drivers/clk/meson/s4-pll.c | 875 ++++++++++++++++++ >>>> drivers/clk/meson/s4-pll.h | 88 ++ >>>> .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + >>>> 7 files changed, 1059 insertions(+) >>>> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>> create mode 100644 drivers/clk/meson/s4-pll.c >>>> create mode 100644 drivers/clk/meson/s4-pll.h >>>> create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>> >>>> diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>> new file mode 100644 >>>> index 000000000000..fd517e8ef14f >>>> --- /dev/null >>>> +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>> @@ -0,0 +1,51 @@ >>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>>> +%YAML 1.2 >>>> +--- >>>> +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# >>>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>>> + >>>> +title: Amlogic Meson S serials PLL Clock Controller >>>> + >>>> +maintainers: >>>> + - Neil Armstrong <narmstrong@baylibre.com> >>>> + - Jerome Brunet <jbrunet@baylibre.com> >>>> + - Yu Tu <yu.hu@amlogic.com> >>>> + >>> One blank line. >> >> I will delete this, on next version patch. >> >>> >>>> + >>>> +properties: >>>> + compatible: >>>> + const: amlogic,s4-pll-clkc >>>> + >>>> + reg: >>>> + maxItems: 1 >>>> + >>>> + clocks: >>>> + maxItems: 1 >>>> + >>>> + clock-names: >>>> + items: >>>> + - const: xtal >>>> + >>>> + "#clock-cells": >>>> + const: 1 >>>> + >>>> +required: >>>> + - compatible >>>> + - reg >>>> + - clocks >>>> + - clock-names >>>> + - "#clock-cells" >>>> + >>>> +additionalProperties: false >>>> + >>>> +examples: >>>> + - | >>>> + clkc_pll: clock-controller@fe008000 { >>>> + compatible = "amlogic,s4-pll-clkc"; >>>> + reg = <0xfe008000 0x1e8>; >>>> + clocks = <&xtal>; >>>> + clock-names = "xtal"; >>>> + #clock-cells = <1>; >>>> + }; >>> >>> >>>> +#endif /* __MESON_S4_PLL_H__ */ >>>> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>> new file mode 100644 >>>> index 000000000000..345f87023886 >>>> --- /dev/null >>>> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>> >>> This belongs to bindings patch, not driver. >>> >>>> @@ -0,0 +1,30 @@ >>>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >>>> +/* >>>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >>>> + * Author: Yu Tu <yu.tu@amlogic.com> >>>> + */ >>>> + >>>> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>> + >>>> +/* >>>> + * CLKID index values >>>> + */ >>>> + >>>> +#define CLKID_FIXED_PLL 1 >>>> +#define CLKID_FCLK_DIV2 3 >>> >>> Indexes start from 0 and are incremented by 1. Not by 2. >>> >>> NAK. >> >> I remember Jerome discussing this with you.You can look at this submission history. >> https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ > > Historically we did that by only exposing part of the numbers, controlling which > clocks were part of the bindings. > > But it seems this doesn't make sens anymore, maybe it would be time to put all the > clock ids in the bindings for this new SoC and break with the previous strategy. So the outcome of the previous discussion was somewhere later in that thread: > It is just a choice to not expose some IDs. > It is not tied to the implementation at all. > I think we actually follow the rules and the idea behind it. Best regards, Krzysztof _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings 2022-11-23 13:53 ` Krzysztof Kozlowski (?) @ 2022-11-25 9:23 ` Jerome Brunet -1 siblings, 0 replies; 109+ messages in thread From: Jerome Brunet @ 2022-11-25 9:23 UTC (permalink / raw) To: Krzysztof Kozlowski, neil.armstrong, Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On Wed 23 Nov 2022 at 14:53, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > On 23/11/2022 14:23, Neil Armstrong wrote: >> Hi, >> >> On 23/11/2022 12:16, Yu Tu wrote: >>> Hi Krzysztof, >>> Thank you for your reply. >>> >>> On 2022/11/23 18:08, Krzysztof Kozlowski wrote: >>>> [ EXTERNAL EMAIL ] >>>> >>>> On 23/11/2022 03:13, Yu Tu wrote: >>>>> Add the S4 PLL clock controller found and bindings in the s4 SoC family. >>>>> >>>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>>> --- >>>>> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + >>>> >>>> This is v5 and still bindings are here? Bindings are always separate >>>> patches. Use subject prefixes matching the subsystem (git log --oneline >>>> -- ...). >>>> >>>> And this was split, wasn't it? What happened here?!? >>> >>> Put bindings and clock driver patch together from Jerome. Maybe you can read this chat history. >>> https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ >> >> Jerome was asking you to send 2 patchsets, one with : >> - bindings in separate patches >> - drivers in separate patches >> and a second with DT changes. Indeed, this is what was asked. It is aligned with Krzysztof's request. >> >> Then when the bindings + clocks patches are merged, a pull request of the bindings >> can be done to me so I can merge it with DT. >> >>> >>>> >>>> >>>>> MAINTAINERS | 1 + >>>>> drivers/clk/meson/Kconfig | 13 + >>>>> drivers/clk/meson/Makefile | 1 + >>>>> drivers/clk/meson/s4-pll.c | 875 ++++++++++++++++++ >>>>> drivers/clk/meson/s4-pll.h | 88 ++ >>>>> .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + >>>>> 7 files changed, 1059 insertions(+) >>>>> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>> create mode 100644 drivers/clk/meson/s4-pll.c >>>>> create mode 100644 drivers/clk/meson/s4-pll.h >>>>> create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>> >>>>> diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>> new file mode 100644 >>>>> index 000000000000..fd517e8ef14f >>>>> --- /dev/null >>>>> +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>> @@ -0,0 +1,51 @@ >>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>>>> +%YAML 1.2 >>>>> +--- >>>>> +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# >>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>>>> + >>>>> +title: Amlogic Meson S serials PLL Clock Controller >>>>> + >>>>> +maintainers: >>>>> + - Neil Armstrong <narmstrong@baylibre.com> >>>>> + - Jerome Brunet <jbrunet@baylibre.com> >>>>> + - Yu Tu <yu.hu@amlogic.com> >>>>> + >>>> One blank line. >>> >>> I will delete this, on next version patch. >>> >>>> >>>>> + >>>>> +properties: >>>>> + compatible: >>>>> + const: amlogic,s4-pll-clkc >>>>> + >>>>> + reg: >>>>> + maxItems: 1 >>>>> + >>>>> + clocks: >>>>> + maxItems: 1 >>>>> + >>>>> + clock-names: >>>>> + items: >>>>> + - const: xtal >>>>> + >>>>> + "#clock-cells": >>>>> + const: 1 >>>>> + >>>>> +required: >>>>> + - compatible >>>>> + - reg >>>>> + - clocks >>>>> + - clock-names >>>>> + - "#clock-cells" >>>>> + >>>>> +additionalProperties: false >>>>> + >>>>> +examples: >>>>> + - | >>>>> + clkc_pll: clock-controller@fe008000 { >>>>> + compatible = "amlogic,s4-pll-clkc"; >>>>> + reg = <0xfe008000 0x1e8>; >>>>> + clocks = <&xtal>; >>>>> + clock-names = "xtal"; >>>>> + #clock-cells = <1>; >>>>> + }; >>>> >>>> >>>>> +#endif /* __MESON_S4_PLL_H__ */ >>>>> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>> new file mode 100644 >>>>> index 000000000000..345f87023886 >>>>> --- /dev/null >>>>> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>> >>>> This belongs to bindings patch, not driver. >>>> >>>>> @@ -0,0 +1,30 @@ >>>>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >>>>> +/* >>>>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >>>>> + * Author: Yu Tu <yu.tu@amlogic.com> >>>>> + */ >>>>> + >>>>> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>> + >>>>> +/* >>>>> + * CLKID index values >>>>> + */ >>>>> + >>>>> +#define CLKID_FIXED_PLL 1 >>>>> +#define CLKID_FCLK_DIV2 3 >>>> >>>> Indexes start from 0 and are incremented by 1. Not by 2. >>>> >>>> NAK. >>> >>> I remember Jerome discussing this with you.You can look at this submission history. >>> https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ >> >> Historically we did that by only exposing part of the numbers, controlling which >> clocks were part of the bindings. >> >> But it seems this doesn't make sens anymore, maybe it would be time to put all the >> clock ids in the bindings for this new SoC and break with the previous strategy. Krzysztof and I agreed there is nothing wrong with the current approach, I believe. It does not prevent someone from using an un-exposed clock, sure, or exposing it in the future if necessary. However, I think it clearly shows that an un-exposed element is not expected to be used by an external consumers. It should be enough to trigger a discussion if this expectation is wrong. > > So the outcome of the previous discussion was somewhere later in that > thread: > >> It is just a choice to not expose some IDs. >> It is not tied to the implementation at all. >> I think we actually follow the rules and the idea behind it. > > > Best regards, > Krzysztof ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings @ 2022-11-25 9:23 ` Jerome Brunet 0 siblings, 0 replies; 109+ messages in thread From: Jerome Brunet @ 2022-11-25 9:23 UTC (permalink / raw) To: Krzysztof Kozlowski, neil.armstrong, Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On Wed 23 Nov 2022 at 14:53, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > On 23/11/2022 14:23, Neil Armstrong wrote: >> Hi, >> >> On 23/11/2022 12:16, Yu Tu wrote: >>> Hi Krzysztof, >>> Thank you for your reply. >>> >>> On 2022/11/23 18:08, Krzysztof Kozlowski wrote: >>>> [ EXTERNAL EMAIL ] >>>> >>>> On 23/11/2022 03:13, Yu Tu wrote: >>>>> Add the S4 PLL clock controller found and bindings in the s4 SoC family. >>>>> >>>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>>> --- >>>>> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + >>>> >>>> This is v5 and still bindings are here? Bindings are always separate >>>> patches. Use subject prefixes matching the subsystem (git log --oneline >>>> -- ...). >>>> >>>> And this was split, wasn't it? What happened here?!? >>> >>> Put bindings and clock driver patch together from Jerome. Maybe you can read this chat history. >>> https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ >> >> Jerome was asking you to send 2 patchsets, one with : >> - bindings in separate patches >> - drivers in separate patches >> and a second with DT changes. Indeed, this is what was asked. It is aligned with Krzysztof's request. >> >> Then when the bindings + clocks patches are merged, a pull request of the bindings >> can be done to me so I can merge it with DT. >> >>> >>>> >>>> >>>>> MAINTAINERS | 1 + >>>>> drivers/clk/meson/Kconfig | 13 + >>>>> drivers/clk/meson/Makefile | 1 + >>>>> drivers/clk/meson/s4-pll.c | 875 ++++++++++++++++++ >>>>> drivers/clk/meson/s4-pll.h | 88 ++ >>>>> .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + >>>>> 7 files changed, 1059 insertions(+) >>>>> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>> create mode 100644 drivers/clk/meson/s4-pll.c >>>>> create mode 100644 drivers/clk/meson/s4-pll.h >>>>> create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>> >>>>> diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>> new file mode 100644 >>>>> index 000000000000..fd517e8ef14f >>>>> --- /dev/null >>>>> +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>> @@ -0,0 +1,51 @@ >>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>>>> +%YAML 1.2 >>>>> +--- >>>>> +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# >>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>>>> + >>>>> +title: Amlogic Meson S serials PLL Clock Controller >>>>> + >>>>> +maintainers: >>>>> + - Neil Armstrong <narmstrong@baylibre.com> >>>>> + - Jerome Brunet <jbrunet@baylibre.com> >>>>> + - Yu Tu <yu.hu@amlogic.com> >>>>> + >>>> One blank line. >>> >>> I will delete this, on next version patch. >>> >>>> >>>>> + >>>>> +properties: >>>>> + compatible: >>>>> + const: amlogic,s4-pll-clkc >>>>> + >>>>> + reg: >>>>> + maxItems: 1 >>>>> + >>>>> + clocks: >>>>> + maxItems: 1 >>>>> + >>>>> + clock-names: >>>>> + items: >>>>> + - const: xtal >>>>> + >>>>> + "#clock-cells": >>>>> + const: 1 >>>>> + >>>>> +required: >>>>> + - compatible >>>>> + - reg >>>>> + - clocks >>>>> + - clock-names >>>>> + - "#clock-cells" >>>>> + >>>>> +additionalProperties: false >>>>> + >>>>> +examples: >>>>> + - | >>>>> + clkc_pll: clock-controller@fe008000 { >>>>> + compatible = "amlogic,s4-pll-clkc"; >>>>> + reg = <0xfe008000 0x1e8>; >>>>> + clocks = <&xtal>; >>>>> + clock-names = "xtal"; >>>>> + #clock-cells = <1>; >>>>> + }; >>>> >>>> >>>>> +#endif /* __MESON_S4_PLL_H__ */ >>>>> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>> new file mode 100644 >>>>> index 000000000000..345f87023886 >>>>> --- /dev/null >>>>> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>> >>>> This belongs to bindings patch, not driver. >>>> >>>>> @@ -0,0 +1,30 @@ >>>>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >>>>> +/* >>>>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >>>>> + * Author: Yu Tu <yu.tu@amlogic.com> >>>>> + */ >>>>> + >>>>> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>> + >>>>> +/* >>>>> + * CLKID index values >>>>> + */ >>>>> + >>>>> +#define CLKID_FIXED_PLL 1 >>>>> +#define CLKID_FCLK_DIV2 3 >>>> >>>> Indexes start from 0 and are incremented by 1. Not by 2. >>>> >>>> NAK. >>> >>> I remember Jerome discussing this with you.You can look at this submission history. >>> https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ >> >> Historically we did that by only exposing part of the numbers, controlling which >> clocks were part of the bindings. >> >> But it seems this doesn't make sens anymore, maybe it would be time to put all the >> clock ids in the bindings for this new SoC and break with the previous strategy. Krzysztof and I agreed there is nothing wrong with the current approach, I believe. It does not prevent someone from using an un-exposed clock, sure, or exposing it in the future if necessary. However, I think it clearly shows that an un-exposed element is not expected to be used by an external consumers. It should be enough to trigger a discussion if this expectation is wrong. > > So the outcome of the previous discussion was somewhere later in that > thread: > >> It is just a choice to not expose some IDs. >> It is not tied to the implementation at all. >> I think we actually follow the rules and the idea behind it. > > > Best regards, > Krzysztof _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings @ 2022-11-25 9:23 ` Jerome Brunet 0 siblings, 0 replies; 109+ messages in thread From: Jerome Brunet @ 2022-11-25 9:23 UTC (permalink / raw) To: Krzysztof Kozlowski, neil.armstrong, Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On Wed 23 Nov 2022 at 14:53, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > On 23/11/2022 14:23, Neil Armstrong wrote: >> Hi, >> >> On 23/11/2022 12:16, Yu Tu wrote: >>> Hi Krzysztof, >>> Thank you for your reply. >>> >>> On 2022/11/23 18:08, Krzysztof Kozlowski wrote: >>>> [ EXTERNAL EMAIL ] >>>> >>>> On 23/11/2022 03:13, Yu Tu wrote: >>>>> Add the S4 PLL clock controller found and bindings in the s4 SoC family. >>>>> >>>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>>> --- >>>>> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + >>>> >>>> This is v5 and still bindings are here? Bindings are always separate >>>> patches. Use subject prefixes matching the subsystem (git log --oneline >>>> -- ...). >>>> >>>> And this was split, wasn't it? What happened here?!? >>> >>> Put bindings and clock driver patch together from Jerome. Maybe you can read this chat history. >>> https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ >> >> Jerome was asking you to send 2 patchsets, one with : >> - bindings in separate patches >> - drivers in separate patches >> and a second with DT changes. Indeed, this is what was asked. It is aligned with Krzysztof's request. >> >> Then when the bindings + clocks patches are merged, a pull request of the bindings >> can be done to me so I can merge it with DT. >> >>> >>>> >>>> >>>>> MAINTAINERS | 1 + >>>>> drivers/clk/meson/Kconfig | 13 + >>>>> drivers/clk/meson/Makefile | 1 + >>>>> drivers/clk/meson/s4-pll.c | 875 ++++++++++++++++++ >>>>> drivers/clk/meson/s4-pll.h | 88 ++ >>>>> .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + >>>>> 7 files changed, 1059 insertions(+) >>>>> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>> create mode 100644 drivers/clk/meson/s4-pll.c >>>>> create mode 100644 drivers/clk/meson/s4-pll.h >>>>> create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>> >>>>> diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>> new file mode 100644 >>>>> index 000000000000..fd517e8ef14f >>>>> --- /dev/null >>>>> +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>> @@ -0,0 +1,51 @@ >>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>>>> +%YAML 1.2 >>>>> +--- >>>>> +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# >>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>>>> + >>>>> +title: Amlogic Meson S serials PLL Clock Controller >>>>> + >>>>> +maintainers: >>>>> + - Neil Armstrong <narmstrong@baylibre.com> >>>>> + - Jerome Brunet <jbrunet@baylibre.com> >>>>> + - Yu Tu <yu.hu@amlogic.com> >>>>> + >>>> One blank line. >>> >>> I will delete this, on next version patch. >>> >>>> >>>>> + >>>>> +properties: >>>>> + compatible: >>>>> + const: amlogic,s4-pll-clkc >>>>> + >>>>> + reg: >>>>> + maxItems: 1 >>>>> + >>>>> + clocks: >>>>> + maxItems: 1 >>>>> + >>>>> + clock-names: >>>>> + items: >>>>> + - const: xtal >>>>> + >>>>> + "#clock-cells": >>>>> + const: 1 >>>>> + >>>>> +required: >>>>> + - compatible >>>>> + - reg >>>>> + - clocks >>>>> + - clock-names >>>>> + - "#clock-cells" >>>>> + >>>>> +additionalProperties: false >>>>> + >>>>> +examples: >>>>> + - | >>>>> + clkc_pll: clock-controller@fe008000 { >>>>> + compatible = "amlogic,s4-pll-clkc"; >>>>> + reg = <0xfe008000 0x1e8>; >>>>> + clocks = <&xtal>; >>>>> + clock-names = "xtal"; >>>>> + #clock-cells = <1>; >>>>> + }; >>>> >>>> >>>>> +#endif /* __MESON_S4_PLL_H__ */ >>>>> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>> new file mode 100644 >>>>> index 000000000000..345f87023886 >>>>> --- /dev/null >>>>> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>> >>>> This belongs to bindings patch, not driver. >>>> >>>>> @@ -0,0 +1,30 @@ >>>>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >>>>> +/* >>>>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >>>>> + * Author: Yu Tu <yu.tu@amlogic.com> >>>>> + */ >>>>> + >>>>> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>> + >>>>> +/* >>>>> + * CLKID index values >>>>> + */ >>>>> + >>>>> +#define CLKID_FIXED_PLL 1 >>>>> +#define CLKID_FCLK_DIV2 3 >>>> >>>> Indexes start from 0 and are incremented by 1. Not by 2. >>>> >>>> NAK. >>> >>> I remember Jerome discussing this with you.You can look at this submission history. >>> https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ >> >> Historically we did that by only exposing part of the numbers, controlling which >> clocks were part of the bindings. >> >> But it seems this doesn't make sens anymore, maybe it would be time to put all the >> clock ids in the bindings for this new SoC and break with the previous strategy. Krzysztof and I agreed there is nothing wrong with the current approach, I believe. It does not prevent someone from using an un-exposed clock, sure, or exposing it in the future if necessary. However, I think it clearly shows that an un-exposed element is not expected to be used by an external consumers. It should be enough to trigger a discussion if this expectation is wrong. > > So the outcome of the previous discussion was somewhere later in that > thread: > >> It is just a choice to not expose some IDs. >> It is not tied to the implementation at all. >> I think we actually follow the rules and the idea behind it. > > > Best regards, > Krzysztof _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings 2022-11-25 9:23 ` Jerome Brunet (?) @ 2022-11-28 7:39 ` Yu Tu -1 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-28 7:39 UTC (permalink / raw) To: Jerome Brunet, Krzysztof Kozlowski, neil.armstrong, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang Hi Jerome, Thank you for your reply. On 2022/11/25 17:23, Jerome Brunet wrote: > [ EXTERNAL EMAIL ] > > > On Wed 23 Nov 2022 at 14:53, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > >> On 23/11/2022 14:23, Neil Armstrong wrote: >>> Hi, >>> >>> On 23/11/2022 12:16, Yu Tu wrote: >>>> Hi Krzysztof, >>>> Thank you for your reply. >>>> >>>> On 2022/11/23 18:08, Krzysztof Kozlowski wrote: >>>>> [ EXTERNAL EMAIL ] >>>>> >>>>> On 23/11/2022 03:13, Yu Tu wrote: >>>>>> Add the S4 PLL clock controller found and bindings in the s4 SoC family. >>>>>> >>>>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>>>> --- >>>>>> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + >>>>> >>>>> This is v5 and still bindings are here? Bindings are always separate >>>>> patches. Use subject prefixes matching the subsystem (git log --oneline >>>>> -- ...). >>>>> >>>>> And this was split, wasn't it? What happened here?!? >>>> >>>> Put bindings and clock driver patch together from Jerome. Maybe you can read this chat history. >>>> https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ >>> >>> Jerome was asking you to send 2 patchsets, one with : >>> - bindings in separate patches >>> - drivers in separate patches >>> and a second with DT changes. > > Indeed, this is what was asked. It is aligned with Krzysztof's request. According to your discussion, I still should send patches in the previous way in series. But I'm going to change it like you suggested. I don't know, am I getting it right? > >>> >>> Then when the bindings + clocks patches are merged, a pull request of the bindings >>> can be done to me so I can merge it with DT. >>> >>>> >>>>> >>>>> >>>>>> MAINTAINERS | 1 + >>>>>> drivers/clk/meson/Kconfig | 13 + >>>>>> drivers/clk/meson/Makefile | 1 + >>>>>> drivers/clk/meson/s4-pll.c | 875 ++++++++++++++++++ >>>>>> drivers/clk/meson/s4-pll.h | 88 ++ >>>>>> .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + >>>>>> 7 files changed, 1059 insertions(+) >>>>>> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>> create mode 100644 drivers/clk/meson/s4-pll.c >>>>>> create mode 100644 drivers/clk/meson/s4-pll.h >>>>>> create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>> >>>>>> diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>> new file mode 100644 >>>>>> index 000000000000..fd517e8ef14f >>>>>> --- /dev/null >>>>>> +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>> @@ -0,0 +1,51 @@ >>>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>>>>> +%YAML 1.2 >>>>>> +--- >>>>>> +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# >>>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>>>>> + >>>>>> +title: Amlogic Meson S serials PLL Clock Controller >>>>>> + >>>>>> +maintainers: >>>>>> + - Neil Armstrong <narmstrong@baylibre.com> >>>>>> + - Jerome Brunet <jbrunet@baylibre.com> >>>>>> + - Yu Tu <yu.hu@amlogic.com> >>>>>> + >>>>> One blank line. >>>> >>>> I will delete this, on next version patch. >>>> >>>>> >>>>>> + >>>>>> +properties: >>>>>> + compatible: >>>>>> + const: amlogic,s4-pll-clkc >>>>>> + >>>>>> + reg: >>>>>> + maxItems: 1 >>>>>> + >>>>>> + clocks: >>>>>> + maxItems: 1 >>>>>> + >>>>>> + clock-names: >>>>>> + items: >>>>>> + - const: xtal >>>>>> + >>>>>> + "#clock-cells": >>>>>> + const: 1 >>>>>> + >>>>>> +required: >>>>>> + - compatible >>>>>> + - reg >>>>>> + - clocks >>>>>> + - clock-names >>>>>> + - "#clock-cells" >>>>>> + >>>>>> +additionalProperties: false >>>>>> + >>>>>> +examples: >>>>>> + - | >>>>>> + clkc_pll: clock-controller@fe008000 { >>>>>> + compatible = "amlogic,s4-pll-clkc"; >>>>>> + reg = <0xfe008000 0x1e8>; >>>>>> + clocks = <&xtal>; >>>>>> + clock-names = "xtal"; >>>>>> + #clock-cells = <1>; >>>>>> + }; >>>>> >>>>> >>>>>> +#endif /* __MESON_S4_PLL_H__ */ >>>>>> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>> new file mode 100644 >>>>>> index 000000000000..345f87023886 >>>>>> --- /dev/null >>>>>> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>> >>>>> This belongs to bindings patch, not driver. >>>>> >>>>>> @@ -0,0 +1,30 @@ >>>>>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >>>>>> +/* >>>>>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >>>>>> + * Author: Yu Tu <yu.tu@amlogic.com> >>>>>> + */ >>>>>> + >>>>>> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>>> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>>> + >>>>>> +/* >>>>>> + * CLKID index values >>>>>> + */ >>>>>> + >>>>>> +#define CLKID_FIXED_PLL 1 >>>>>> +#define CLKID_FCLK_DIV2 3 >>>>> >>>>> Indexes start from 0 and are incremented by 1. Not by 2. >>>>> >>>>> NAK. >>>> >>>> I remember Jerome discussing this with you.You can look at this submission history. >>>> https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ >>> >>> Historically we did that by only exposing part of the numbers, controlling which >>> clocks were part of the bindings. >>> >>> But it seems this doesn't make sens anymore, maybe it would be time to put all the >>> clock ids in the bindings for this new SoC and break with the previous strategy. > > Krzysztof and I agreed there is nothing wrong with the current > approach, I believe. > > It does not prevent someone from using an un-exposed clock, sure, or > exposing it in the future if necessary. > > However, I think it clearly shows that an un-exposed element is not > expected to be used by an external consumers. It should be enough to > trigger a discussion if this expectation is wrong. > >> >> So the outcome of the previous discussion was somewhere later in that >> thread: >> >>> It is just a choice to not expose some IDs. >>> It is not tied to the implementation at all. >>> I think we actually follow the rules and the idea behind it. >> >> >> Best regards, >> Krzysztof > > . ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings @ 2022-11-28 7:39 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-28 7:39 UTC (permalink / raw) To: Jerome Brunet, Krzysztof Kozlowski, neil.armstrong, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang Hi Jerome, Thank you for your reply. On 2022/11/25 17:23, Jerome Brunet wrote: > [ EXTERNAL EMAIL ] > > > On Wed 23 Nov 2022 at 14:53, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > >> On 23/11/2022 14:23, Neil Armstrong wrote: >>> Hi, >>> >>> On 23/11/2022 12:16, Yu Tu wrote: >>>> Hi Krzysztof, >>>> Thank you for your reply. >>>> >>>> On 2022/11/23 18:08, Krzysztof Kozlowski wrote: >>>>> [ EXTERNAL EMAIL ] >>>>> >>>>> On 23/11/2022 03:13, Yu Tu wrote: >>>>>> Add the S4 PLL clock controller found and bindings in the s4 SoC family. >>>>>> >>>>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>>>> --- >>>>>> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + >>>>> >>>>> This is v5 and still bindings are here? Bindings are always separate >>>>> patches. Use subject prefixes matching the subsystem (git log --oneline >>>>> -- ...). >>>>> >>>>> And this was split, wasn't it? What happened here?!? >>>> >>>> Put bindings and clock driver patch together from Jerome. Maybe you can read this chat history. >>>> https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ >>> >>> Jerome was asking you to send 2 patchsets, one with : >>> - bindings in separate patches >>> - drivers in separate patches >>> and a second with DT changes. > > Indeed, this is what was asked. It is aligned with Krzysztof's request. According to your discussion, I still should send patches in the previous way in series. But I'm going to change it like you suggested. I don't know, am I getting it right? > >>> >>> Then when the bindings + clocks patches are merged, a pull request of the bindings >>> can be done to me so I can merge it with DT. >>> >>>> >>>>> >>>>> >>>>>> MAINTAINERS | 1 + >>>>>> drivers/clk/meson/Kconfig | 13 + >>>>>> drivers/clk/meson/Makefile | 1 + >>>>>> drivers/clk/meson/s4-pll.c | 875 ++++++++++++++++++ >>>>>> drivers/clk/meson/s4-pll.h | 88 ++ >>>>>> .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + >>>>>> 7 files changed, 1059 insertions(+) >>>>>> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>> create mode 100644 drivers/clk/meson/s4-pll.c >>>>>> create mode 100644 drivers/clk/meson/s4-pll.h >>>>>> create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>> >>>>>> diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>> new file mode 100644 >>>>>> index 000000000000..fd517e8ef14f >>>>>> --- /dev/null >>>>>> +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>> @@ -0,0 +1,51 @@ >>>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>>>>> +%YAML 1.2 >>>>>> +--- >>>>>> +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# >>>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>>>>> + >>>>>> +title: Amlogic Meson S serials PLL Clock Controller >>>>>> + >>>>>> +maintainers: >>>>>> + - Neil Armstrong <narmstrong@baylibre.com> >>>>>> + - Jerome Brunet <jbrunet@baylibre.com> >>>>>> + - Yu Tu <yu.hu@amlogic.com> >>>>>> + >>>>> One blank line. >>>> >>>> I will delete this, on next version patch. >>>> >>>>> >>>>>> + >>>>>> +properties: >>>>>> + compatible: >>>>>> + const: amlogic,s4-pll-clkc >>>>>> + >>>>>> + reg: >>>>>> + maxItems: 1 >>>>>> + >>>>>> + clocks: >>>>>> + maxItems: 1 >>>>>> + >>>>>> + clock-names: >>>>>> + items: >>>>>> + - const: xtal >>>>>> + >>>>>> + "#clock-cells": >>>>>> + const: 1 >>>>>> + >>>>>> +required: >>>>>> + - compatible >>>>>> + - reg >>>>>> + - clocks >>>>>> + - clock-names >>>>>> + - "#clock-cells" >>>>>> + >>>>>> +additionalProperties: false >>>>>> + >>>>>> +examples: >>>>>> + - | >>>>>> + clkc_pll: clock-controller@fe008000 { >>>>>> + compatible = "amlogic,s4-pll-clkc"; >>>>>> + reg = <0xfe008000 0x1e8>; >>>>>> + clocks = <&xtal>; >>>>>> + clock-names = "xtal"; >>>>>> + #clock-cells = <1>; >>>>>> + }; >>>>> >>>>> >>>>>> +#endif /* __MESON_S4_PLL_H__ */ >>>>>> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>> new file mode 100644 >>>>>> index 000000000000..345f87023886 >>>>>> --- /dev/null >>>>>> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>> >>>>> This belongs to bindings patch, not driver. >>>>> >>>>>> @@ -0,0 +1,30 @@ >>>>>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >>>>>> +/* >>>>>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >>>>>> + * Author: Yu Tu <yu.tu@amlogic.com> >>>>>> + */ >>>>>> + >>>>>> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>>> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>>> + >>>>>> +/* >>>>>> + * CLKID index values >>>>>> + */ >>>>>> + >>>>>> +#define CLKID_FIXED_PLL 1 >>>>>> +#define CLKID_FCLK_DIV2 3 >>>>> >>>>> Indexes start from 0 and are incremented by 1. Not by 2. >>>>> >>>>> NAK. >>>> >>>> I remember Jerome discussing this with you.You can look at this submission history. >>>> https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ >>> >>> Historically we did that by only exposing part of the numbers, controlling which >>> clocks were part of the bindings. >>> >>> But it seems this doesn't make sens anymore, maybe it would be time to put all the >>> clock ids in the bindings for this new SoC and break with the previous strategy. > > Krzysztof and I agreed there is nothing wrong with the current > approach, I believe. > > It does not prevent someone from using an un-exposed clock, sure, or > exposing it in the future if necessary. > > However, I think it clearly shows that an un-exposed element is not > expected to be used by an external consumers. It should be enough to > trigger a discussion if this expectation is wrong. > >> >> So the outcome of the previous discussion was somewhere later in that >> thread: >> >>> It is just a choice to not expose some IDs. >>> It is not tied to the implementation at all. >>> I think we actually follow the rules and the idea behind it. >> >> >> Best regards, >> Krzysztof > > . _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings @ 2022-11-28 7:39 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-28 7:39 UTC (permalink / raw) To: Jerome Brunet, Krzysztof Kozlowski, neil.armstrong, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang Hi Jerome, Thank you for your reply. On 2022/11/25 17:23, Jerome Brunet wrote: > [ EXTERNAL EMAIL ] > > > On Wed 23 Nov 2022 at 14:53, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > >> On 23/11/2022 14:23, Neil Armstrong wrote: >>> Hi, >>> >>> On 23/11/2022 12:16, Yu Tu wrote: >>>> Hi Krzysztof, >>>> Thank you for your reply. >>>> >>>> On 2022/11/23 18:08, Krzysztof Kozlowski wrote: >>>>> [ EXTERNAL EMAIL ] >>>>> >>>>> On 23/11/2022 03:13, Yu Tu wrote: >>>>>> Add the S4 PLL clock controller found and bindings in the s4 SoC family. >>>>>> >>>>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>>>> --- >>>>>> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + >>>>> >>>>> This is v5 and still bindings are here? Bindings are always separate >>>>> patches. Use subject prefixes matching the subsystem (git log --oneline >>>>> -- ...). >>>>> >>>>> And this was split, wasn't it? What happened here?!? >>>> >>>> Put bindings and clock driver patch together from Jerome. Maybe you can read this chat history. >>>> https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ >>> >>> Jerome was asking you to send 2 patchsets, one with : >>> - bindings in separate patches >>> - drivers in separate patches >>> and a second with DT changes. > > Indeed, this is what was asked. It is aligned with Krzysztof's request. According to your discussion, I still should send patches in the previous way in series. But I'm going to change it like you suggested. I don't know, am I getting it right? > >>> >>> Then when the bindings + clocks patches are merged, a pull request of the bindings >>> can be done to me so I can merge it with DT. >>> >>>> >>>>> >>>>> >>>>>> MAINTAINERS | 1 + >>>>>> drivers/clk/meson/Kconfig | 13 + >>>>>> drivers/clk/meson/Makefile | 1 + >>>>>> drivers/clk/meson/s4-pll.c | 875 ++++++++++++++++++ >>>>>> drivers/clk/meson/s4-pll.h | 88 ++ >>>>>> .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + >>>>>> 7 files changed, 1059 insertions(+) >>>>>> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>> create mode 100644 drivers/clk/meson/s4-pll.c >>>>>> create mode 100644 drivers/clk/meson/s4-pll.h >>>>>> create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>> >>>>>> diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>> new file mode 100644 >>>>>> index 000000000000..fd517e8ef14f >>>>>> --- /dev/null >>>>>> +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>> @@ -0,0 +1,51 @@ >>>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>>>>> +%YAML 1.2 >>>>>> +--- >>>>>> +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# >>>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>>>>> + >>>>>> +title: Amlogic Meson S serials PLL Clock Controller >>>>>> + >>>>>> +maintainers: >>>>>> + - Neil Armstrong <narmstrong@baylibre.com> >>>>>> + - Jerome Brunet <jbrunet@baylibre.com> >>>>>> + - Yu Tu <yu.hu@amlogic.com> >>>>>> + >>>>> One blank line. >>>> >>>> I will delete this, on next version patch. >>>> >>>>> >>>>>> + >>>>>> +properties: >>>>>> + compatible: >>>>>> + const: amlogic,s4-pll-clkc >>>>>> + >>>>>> + reg: >>>>>> + maxItems: 1 >>>>>> + >>>>>> + clocks: >>>>>> + maxItems: 1 >>>>>> + >>>>>> + clock-names: >>>>>> + items: >>>>>> + - const: xtal >>>>>> + >>>>>> + "#clock-cells": >>>>>> + const: 1 >>>>>> + >>>>>> +required: >>>>>> + - compatible >>>>>> + - reg >>>>>> + - clocks >>>>>> + - clock-names >>>>>> + - "#clock-cells" >>>>>> + >>>>>> +additionalProperties: false >>>>>> + >>>>>> +examples: >>>>>> + - | >>>>>> + clkc_pll: clock-controller@fe008000 { >>>>>> + compatible = "amlogic,s4-pll-clkc"; >>>>>> + reg = <0xfe008000 0x1e8>; >>>>>> + clocks = <&xtal>; >>>>>> + clock-names = "xtal"; >>>>>> + #clock-cells = <1>; >>>>>> + }; >>>>> >>>>> >>>>>> +#endif /* __MESON_S4_PLL_H__ */ >>>>>> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>> new file mode 100644 >>>>>> index 000000000000..345f87023886 >>>>>> --- /dev/null >>>>>> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>> >>>>> This belongs to bindings patch, not driver. >>>>> >>>>>> @@ -0,0 +1,30 @@ >>>>>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >>>>>> +/* >>>>>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >>>>>> + * Author: Yu Tu <yu.tu@amlogic.com> >>>>>> + */ >>>>>> + >>>>>> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>>> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>>> + >>>>>> +/* >>>>>> + * CLKID index values >>>>>> + */ >>>>>> + >>>>>> +#define CLKID_FIXED_PLL 1 >>>>>> +#define CLKID_FCLK_DIV2 3 >>>>> >>>>> Indexes start from 0 and are incremented by 1. Not by 2. >>>>> >>>>> NAK. >>>> >>>> I remember Jerome discussing this with you.You can look at this submission history. >>>> https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ >>> >>> Historically we did that by only exposing part of the numbers, controlling which >>> clocks were part of the bindings. >>> >>> But it seems this doesn't make sens anymore, maybe it would be time to put all the >>> clock ids in the bindings for this new SoC and break with the previous strategy. > > Krzysztof and I agreed there is nothing wrong with the current > approach, I believe. > > It does not prevent someone from using an un-exposed clock, sure, or > exposing it in the future if necessary. > > However, I think it clearly shows that an un-exposed element is not > expected to be used by an external consumers. It should be enough to > trigger a discussion if this expectation is wrong. > >> >> So the outcome of the previous discussion was somewhere later in that >> thread: >> >>> It is just a choice to not expose some IDs. >>> It is not tied to the implementation at all. >>> I think we actually follow the rules and the idea behind it. >> >> >> Best regards, >> Krzysztof > > . _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings 2022-11-28 7:39 ` Yu Tu (?) @ 2022-11-28 12:33 ` Jerome Brunet -1 siblings, 0 replies; 109+ messages in thread From: Jerome Brunet @ 2022-11-28 12:33 UTC (permalink / raw) To: Yu Tu, Krzysztof Kozlowski, neil.armstrong, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On Mon 28 Nov 2022 at 15:39, Yu Tu <yu.tu@amlogic.com> wrote: > Hi Jerome, > Thank you for your reply. > > On 2022/11/25 17:23, Jerome Brunet wrote: >> [ EXTERNAL EMAIL ] >> On Wed 23 Nov 2022 at 14:53, Krzysztof Kozlowski >> <krzysztof.kozlowski@linaro.org> wrote: >> >>> On 23/11/2022 14:23, Neil Armstrong wrote: >>>> Hi, >>>> >>>> On 23/11/2022 12:16, Yu Tu wrote: >>>>> Hi Krzysztof, >>>>> Thank you for your reply. >>>>> >>>>> On 2022/11/23 18:08, Krzysztof Kozlowski wrote: >>>>>> [ EXTERNAL EMAIL ] >>>>>> >>>>>> On 23/11/2022 03:13, Yu Tu wrote: >>>>>>> Add the S4 PLL clock controller found and bindings in the s4 SoC family. >>>>>>> >>>>>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>>>>> --- >>>>>>> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + >>>>>> >>>>>> This is v5 and still bindings are here? Bindings are always separate >>>>>> patches. Use subject prefixes matching the subsystem (git log --oneline >>>>>> -- ...). >>>>>> >>>>>> And this was split, wasn't it? What happened here?!? >>>>> >>>>> Put bindings and clock driver patch together from Jerome. Maybe you can read this chat history. >>>>> https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ >>>> >>>> Jerome was asking you to send 2 patchsets, one with : >>>> - bindings in separate patches >>>> - drivers in separate patches >>>> and a second with DT changes. >> Indeed, this is what was asked. It is aligned with Krzysztof's request. > > According to your discussion, I still should send patches in the previous > way in series. But I'm going to change it like you suggested. > I don't know, am I getting it right? 3 people tried to explain this already and we all told you the same thing. * 1 patchset per maintainer: clk and dt * bindings must be dedicated patches - never mixed with driver code. I strongly suggest that you take some time to (re)read: * https://docs.kernel.org/process/submitting-patches.html * https://docs.kernel.org/devicetree/bindings/submitting-patches.html If still unclear, please take some time to look at the kernel mailing list archive and see how others have done the same things. Thx. > >> >>>> >>>> Then when the bindings + clocks patches are merged, a pull request of the bindings >>>> can be done to me so I can merge it with DT. >>>> >>>>> >>>>>> >>>>>> >>>>>>> MAINTAINERS | 1 + >>>>>>> drivers/clk/meson/Kconfig | 13 + >>>>>>> drivers/clk/meson/Makefile | 1 + >>>>>>> drivers/clk/meson/s4-pll.c | 875 ++++++++++++++++++ >>>>>>> drivers/clk/meson/s4-pll.h | 88 ++ >>>>>>> .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + >>>>>>> 7 files changed, 1059 insertions(+) >>>>>>> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>> create mode 100644 drivers/clk/meson/s4-pll.c >>>>>>> create mode 100644 drivers/clk/meson/s4-pll.h >>>>>>> create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>> >>>>>>> diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>> new file mode 100644 >>>>>>> index 000000000000..fd517e8ef14f >>>>>>> --- /dev/null >>>>>>> +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>> @@ -0,0 +1,51 @@ >>>>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>>>>>> +%YAML 1.2 >>>>>>> +--- >>>>>>> +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# >>>>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>>>>>> + >>>>>>> +title: Amlogic Meson S serials PLL Clock Controller >>>>>>> + >>>>>>> +maintainers: >>>>>>> + - Neil Armstrong <narmstrong@baylibre.com> >>>>>>> + - Jerome Brunet <jbrunet@baylibre.com> >>>>>>> + - Yu Tu <yu.hu@amlogic.com> >>>>>>> + >>>>>> One blank line. >>>>> >>>>> I will delete this, on next version patch. >>>>> >>>>>> >>>>>>> + >>>>>>> +properties: >>>>>>> + compatible: >>>>>>> + const: amlogic,s4-pll-clkc >>>>>>> + >>>>>>> + reg: >>>>>>> + maxItems: 1 >>>>>>> + >>>>>>> + clocks: >>>>>>> + maxItems: 1 >>>>>>> + >>>>>>> + clock-names: >>>>>>> + items: >>>>>>> + - const: xtal >>>>>>> + >>>>>>> + "#clock-cells": >>>>>>> + const: 1 >>>>>>> + >>>>>>> +required: >>>>>>> + - compatible >>>>>>> + - reg >>>>>>> + - clocks >>>>>>> + - clock-names >>>>>>> + - "#clock-cells" >>>>>>> + >>>>>>> +additionalProperties: false >>>>>>> + >>>>>>> +examples: >>>>>>> + - | >>>>>>> + clkc_pll: clock-controller@fe008000 { >>>>>>> + compatible = "amlogic,s4-pll-clkc"; >>>>>>> + reg = <0xfe008000 0x1e8>; >>>>>>> + clocks = <&xtal>; >>>>>>> + clock-names = "xtal"; >>>>>>> + #clock-cells = <1>; >>>>>>> + }; >>>>>> >>>>>> >>>>>>> +#endif /* __MESON_S4_PLL_H__ */ >>>>>>> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>> new file mode 100644 >>>>>>> index 000000000000..345f87023886 >>>>>>> --- /dev/null >>>>>>> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>> >>>>>> This belongs to bindings patch, not driver. >>>>>> >>>>>>> @@ -0,0 +1,30 @@ >>>>>>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >>>>>>> +/* >>>>>>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >>>>>>> + * Author: Yu Tu <yu.tu@amlogic.com> >>>>>>> + */ >>>>>>> + >>>>>>> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>>>> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>>>> + >>>>>>> +/* >>>>>>> + * CLKID index values >>>>>>> + */ >>>>>>> + >>>>>>> +#define CLKID_FIXED_PLL 1 >>>>>>> +#define CLKID_FCLK_DIV2 3 >>>>>> >>>>>> Indexes start from 0 and are incremented by 1. Not by 2. >>>>>> >>>>>> NAK. >>>>> >>>>> I remember Jerome discussing this with you.You can look at this submission history. >>>>> https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ >>>> >>>> Historically we did that by only exposing part of the numbers, controlling which >>>> clocks were part of the bindings. >>>> >>>> But it seems this doesn't make sens anymore, maybe it would be time to put all the >>>> clock ids in the bindings for this new SoC and break with the previous strategy. >> Krzysztof and I agreed there is nothing wrong with the current >> approach, I believe. >> It does not prevent someone from using an un-exposed clock, sure, or >> exposing it in the future if necessary. >> However, I think it clearly shows that an un-exposed element is not >> expected to be used by an external consumers. It should be enough to >> trigger a discussion if this expectation is wrong. >> >>> >>> So the outcome of the previous discussion was somewhere later in that >>> thread: >>> >>>> It is just a choice to not expose some IDs. >>>> It is not tied to the implementation at all. >>>> I think we actually follow the rules and the idea behind it. >>> >>> >>> Best regards, >>> Krzysztof >> . ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings @ 2022-11-28 12:33 ` Jerome Brunet 0 siblings, 0 replies; 109+ messages in thread From: Jerome Brunet @ 2022-11-28 12:33 UTC (permalink / raw) To: Yu Tu, Krzysztof Kozlowski, neil.armstrong, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On Mon 28 Nov 2022 at 15:39, Yu Tu <yu.tu@amlogic.com> wrote: > Hi Jerome, > Thank you for your reply. > > On 2022/11/25 17:23, Jerome Brunet wrote: >> [ EXTERNAL EMAIL ] >> On Wed 23 Nov 2022 at 14:53, Krzysztof Kozlowski >> <krzysztof.kozlowski@linaro.org> wrote: >> >>> On 23/11/2022 14:23, Neil Armstrong wrote: >>>> Hi, >>>> >>>> On 23/11/2022 12:16, Yu Tu wrote: >>>>> Hi Krzysztof, >>>>> Thank you for your reply. >>>>> >>>>> On 2022/11/23 18:08, Krzysztof Kozlowski wrote: >>>>>> [ EXTERNAL EMAIL ] >>>>>> >>>>>> On 23/11/2022 03:13, Yu Tu wrote: >>>>>>> Add the S4 PLL clock controller found and bindings in the s4 SoC family. >>>>>>> >>>>>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>>>>> --- >>>>>>> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + >>>>>> >>>>>> This is v5 and still bindings are here? Bindings are always separate >>>>>> patches. Use subject prefixes matching the subsystem (git log --oneline >>>>>> -- ...). >>>>>> >>>>>> And this was split, wasn't it? What happened here?!? >>>>> >>>>> Put bindings and clock driver patch together from Jerome. Maybe you can read this chat history. >>>>> https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ >>>> >>>> Jerome was asking you to send 2 patchsets, one with : >>>> - bindings in separate patches >>>> - drivers in separate patches >>>> and a second with DT changes. >> Indeed, this is what was asked. It is aligned with Krzysztof's request. > > According to your discussion, I still should send patches in the previous > way in series. But I'm going to change it like you suggested. > I don't know, am I getting it right? 3 people tried to explain this already and we all told you the same thing. * 1 patchset per maintainer: clk and dt * bindings must be dedicated patches - never mixed with driver code. I strongly suggest that you take some time to (re)read: * https://docs.kernel.org/process/submitting-patches.html * https://docs.kernel.org/devicetree/bindings/submitting-patches.html If still unclear, please take some time to look at the kernel mailing list archive and see how others have done the same things. Thx. > >> >>>> >>>> Then when the bindings + clocks patches are merged, a pull request of the bindings >>>> can be done to me so I can merge it with DT. >>>> >>>>> >>>>>> >>>>>> >>>>>>> MAINTAINERS | 1 + >>>>>>> drivers/clk/meson/Kconfig | 13 + >>>>>>> drivers/clk/meson/Makefile | 1 + >>>>>>> drivers/clk/meson/s4-pll.c | 875 ++++++++++++++++++ >>>>>>> drivers/clk/meson/s4-pll.h | 88 ++ >>>>>>> .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + >>>>>>> 7 files changed, 1059 insertions(+) >>>>>>> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>> create mode 100644 drivers/clk/meson/s4-pll.c >>>>>>> create mode 100644 drivers/clk/meson/s4-pll.h >>>>>>> create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>> >>>>>>> diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>> new file mode 100644 >>>>>>> index 000000000000..fd517e8ef14f >>>>>>> --- /dev/null >>>>>>> +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>> @@ -0,0 +1,51 @@ >>>>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>>>>>> +%YAML 1.2 >>>>>>> +--- >>>>>>> +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# >>>>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>>>>>> + >>>>>>> +title: Amlogic Meson S serials PLL Clock Controller >>>>>>> + >>>>>>> +maintainers: >>>>>>> + - Neil Armstrong <narmstrong@baylibre.com> >>>>>>> + - Jerome Brunet <jbrunet@baylibre.com> >>>>>>> + - Yu Tu <yu.hu@amlogic.com> >>>>>>> + >>>>>> One blank line. >>>>> >>>>> I will delete this, on next version patch. >>>>> >>>>>> >>>>>>> + >>>>>>> +properties: >>>>>>> + compatible: >>>>>>> + const: amlogic,s4-pll-clkc >>>>>>> + >>>>>>> + reg: >>>>>>> + maxItems: 1 >>>>>>> + >>>>>>> + clocks: >>>>>>> + maxItems: 1 >>>>>>> + >>>>>>> + clock-names: >>>>>>> + items: >>>>>>> + - const: xtal >>>>>>> + >>>>>>> + "#clock-cells": >>>>>>> + const: 1 >>>>>>> + >>>>>>> +required: >>>>>>> + - compatible >>>>>>> + - reg >>>>>>> + - clocks >>>>>>> + - clock-names >>>>>>> + - "#clock-cells" >>>>>>> + >>>>>>> +additionalProperties: false >>>>>>> + >>>>>>> +examples: >>>>>>> + - | >>>>>>> + clkc_pll: clock-controller@fe008000 { >>>>>>> + compatible = "amlogic,s4-pll-clkc"; >>>>>>> + reg = <0xfe008000 0x1e8>; >>>>>>> + clocks = <&xtal>; >>>>>>> + clock-names = "xtal"; >>>>>>> + #clock-cells = <1>; >>>>>>> + }; >>>>>> >>>>>> >>>>>>> +#endif /* __MESON_S4_PLL_H__ */ >>>>>>> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>> new file mode 100644 >>>>>>> index 000000000000..345f87023886 >>>>>>> --- /dev/null >>>>>>> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>> >>>>>> This belongs to bindings patch, not driver. >>>>>> >>>>>>> @@ -0,0 +1,30 @@ >>>>>>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >>>>>>> +/* >>>>>>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >>>>>>> + * Author: Yu Tu <yu.tu@amlogic.com> >>>>>>> + */ >>>>>>> + >>>>>>> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>>>> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>>>> + >>>>>>> +/* >>>>>>> + * CLKID index values >>>>>>> + */ >>>>>>> + >>>>>>> +#define CLKID_FIXED_PLL 1 >>>>>>> +#define CLKID_FCLK_DIV2 3 >>>>>> >>>>>> Indexes start from 0 and are incremented by 1. Not by 2. >>>>>> >>>>>> NAK. >>>>> >>>>> I remember Jerome discussing this with you.You can look at this submission history. >>>>> https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ >>>> >>>> Historically we did that by only exposing part of the numbers, controlling which >>>> clocks were part of the bindings. >>>> >>>> But it seems this doesn't make sens anymore, maybe it would be time to put all the >>>> clock ids in the bindings for this new SoC and break with the previous strategy. >> Krzysztof and I agreed there is nothing wrong with the current >> approach, I believe. >> It does not prevent someone from using an un-exposed clock, sure, or >> exposing it in the future if necessary. >> However, I think it clearly shows that an un-exposed element is not >> expected to be used by an external consumers. It should be enough to >> trigger a discussion if this expectation is wrong. >> >>> >>> So the outcome of the previous discussion was somewhere later in that >>> thread: >>> >>>> It is just a choice to not expose some IDs. >>>> It is not tied to the implementation at all. >>>> I think we actually follow the rules and the idea behind it. >>> >>> >>> Best regards, >>> Krzysztof >> . _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings @ 2022-11-28 12:33 ` Jerome Brunet 0 siblings, 0 replies; 109+ messages in thread From: Jerome Brunet @ 2022-11-28 12:33 UTC (permalink / raw) To: Yu Tu, Krzysztof Kozlowski, neil.armstrong, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On Mon 28 Nov 2022 at 15:39, Yu Tu <yu.tu@amlogic.com> wrote: > Hi Jerome, > Thank you for your reply. > > On 2022/11/25 17:23, Jerome Brunet wrote: >> [ EXTERNAL EMAIL ] >> On Wed 23 Nov 2022 at 14:53, Krzysztof Kozlowski >> <krzysztof.kozlowski@linaro.org> wrote: >> >>> On 23/11/2022 14:23, Neil Armstrong wrote: >>>> Hi, >>>> >>>> On 23/11/2022 12:16, Yu Tu wrote: >>>>> Hi Krzysztof, >>>>> Thank you for your reply. >>>>> >>>>> On 2022/11/23 18:08, Krzysztof Kozlowski wrote: >>>>>> [ EXTERNAL EMAIL ] >>>>>> >>>>>> On 23/11/2022 03:13, Yu Tu wrote: >>>>>>> Add the S4 PLL clock controller found and bindings in the s4 SoC family. >>>>>>> >>>>>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>>>>> --- >>>>>>> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + >>>>>> >>>>>> This is v5 and still bindings are here? Bindings are always separate >>>>>> patches. Use subject prefixes matching the subsystem (git log --oneline >>>>>> -- ...). >>>>>> >>>>>> And this was split, wasn't it? What happened here?!? >>>>> >>>>> Put bindings and clock driver patch together from Jerome. Maybe you can read this chat history. >>>>> https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ >>>> >>>> Jerome was asking you to send 2 patchsets, one with : >>>> - bindings in separate patches >>>> - drivers in separate patches >>>> and a second with DT changes. >> Indeed, this is what was asked. It is aligned with Krzysztof's request. > > According to your discussion, I still should send patches in the previous > way in series. But I'm going to change it like you suggested. > I don't know, am I getting it right? 3 people tried to explain this already and we all told you the same thing. * 1 patchset per maintainer: clk and dt * bindings must be dedicated patches - never mixed with driver code. I strongly suggest that you take some time to (re)read: * https://docs.kernel.org/process/submitting-patches.html * https://docs.kernel.org/devicetree/bindings/submitting-patches.html If still unclear, please take some time to look at the kernel mailing list archive and see how others have done the same things. Thx. > >> >>>> >>>> Then when the bindings + clocks patches are merged, a pull request of the bindings >>>> can be done to me so I can merge it with DT. >>>> >>>>> >>>>>> >>>>>> >>>>>>> MAINTAINERS | 1 + >>>>>>> drivers/clk/meson/Kconfig | 13 + >>>>>>> drivers/clk/meson/Makefile | 1 + >>>>>>> drivers/clk/meson/s4-pll.c | 875 ++++++++++++++++++ >>>>>>> drivers/clk/meson/s4-pll.h | 88 ++ >>>>>>> .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + >>>>>>> 7 files changed, 1059 insertions(+) >>>>>>> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>> create mode 100644 drivers/clk/meson/s4-pll.c >>>>>>> create mode 100644 drivers/clk/meson/s4-pll.h >>>>>>> create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>> >>>>>>> diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>> new file mode 100644 >>>>>>> index 000000000000..fd517e8ef14f >>>>>>> --- /dev/null >>>>>>> +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>> @@ -0,0 +1,51 @@ >>>>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>>>>>> +%YAML 1.2 >>>>>>> +--- >>>>>>> +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# >>>>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>>>>>> + >>>>>>> +title: Amlogic Meson S serials PLL Clock Controller >>>>>>> + >>>>>>> +maintainers: >>>>>>> + - Neil Armstrong <narmstrong@baylibre.com> >>>>>>> + - Jerome Brunet <jbrunet@baylibre.com> >>>>>>> + - Yu Tu <yu.hu@amlogic.com> >>>>>>> + >>>>>> One blank line. >>>>> >>>>> I will delete this, on next version patch. >>>>> >>>>>> >>>>>>> + >>>>>>> +properties: >>>>>>> + compatible: >>>>>>> + const: amlogic,s4-pll-clkc >>>>>>> + >>>>>>> + reg: >>>>>>> + maxItems: 1 >>>>>>> + >>>>>>> + clocks: >>>>>>> + maxItems: 1 >>>>>>> + >>>>>>> + clock-names: >>>>>>> + items: >>>>>>> + - const: xtal >>>>>>> + >>>>>>> + "#clock-cells": >>>>>>> + const: 1 >>>>>>> + >>>>>>> +required: >>>>>>> + - compatible >>>>>>> + - reg >>>>>>> + - clocks >>>>>>> + - clock-names >>>>>>> + - "#clock-cells" >>>>>>> + >>>>>>> +additionalProperties: false >>>>>>> + >>>>>>> +examples: >>>>>>> + - | >>>>>>> + clkc_pll: clock-controller@fe008000 { >>>>>>> + compatible = "amlogic,s4-pll-clkc"; >>>>>>> + reg = <0xfe008000 0x1e8>; >>>>>>> + clocks = <&xtal>; >>>>>>> + clock-names = "xtal"; >>>>>>> + #clock-cells = <1>; >>>>>>> + }; >>>>>> >>>>>> >>>>>>> +#endif /* __MESON_S4_PLL_H__ */ >>>>>>> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>> new file mode 100644 >>>>>>> index 000000000000..345f87023886 >>>>>>> --- /dev/null >>>>>>> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>> >>>>>> This belongs to bindings patch, not driver. >>>>>> >>>>>>> @@ -0,0 +1,30 @@ >>>>>>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >>>>>>> +/* >>>>>>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >>>>>>> + * Author: Yu Tu <yu.tu@amlogic.com> >>>>>>> + */ >>>>>>> + >>>>>>> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>>>> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>>>> + >>>>>>> +/* >>>>>>> + * CLKID index values >>>>>>> + */ >>>>>>> + >>>>>>> +#define CLKID_FIXED_PLL 1 >>>>>>> +#define CLKID_FCLK_DIV2 3 >>>>>> >>>>>> Indexes start from 0 and are incremented by 1. Not by 2. >>>>>> >>>>>> NAK. >>>>> >>>>> I remember Jerome discussing this with you.You can look at this submission history. >>>>> https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ >>>> >>>> Historically we did that by only exposing part of the numbers, controlling which >>>> clocks were part of the bindings. >>>> >>>> But it seems this doesn't make sens anymore, maybe it would be time to put all the >>>> clock ids in the bindings for this new SoC and break with the previous strategy. >> Krzysztof and I agreed there is nothing wrong with the current >> approach, I believe. >> It does not prevent someone from using an un-exposed clock, sure, or >> exposing it in the future if necessary. >> However, I think it clearly shows that an un-exposed element is not >> expected to be used by an external consumers. It should be enough to >> trigger a discussion if this expectation is wrong. >> >>> >>> So the outcome of the previous discussion was somewhere later in that >>> thread: >>> >>>> It is just a choice to not expose some IDs. >>>> It is not tied to the implementation at all. >>>> I think we actually follow the rules and the idea behind it. >>> >>> >>> Best regards, >>> Krzysztof >> . _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings 2022-11-28 12:33 ` Jerome Brunet (?) @ 2022-11-28 13:30 ` Yu Tu -1 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-28 13:30 UTC (permalink / raw) To: Jerome Brunet, Krzysztof Kozlowski, neil.armstrong, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang Hi Jerome , On 2022/11/28 20:33, Jerome Brunet wrote: > [ EXTERNAL EMAIL ] > > > On Mon 28 Nov 2022 at 15:39, Yu Tu <yu.tu@amlogic.com> wrote: > >> Hi Jerome, >> Thank you for your reply. >> >> On 2022/11/25 17:23, Jerome Brunet wrote: >>> [ EXTERNAL EMAIL ] >>> On Wed 23 Nov 2022 at 14:53, Krzysztof Kozlowski >>> <krzysztof.kozlowski@linaro.org> wrote: >>> >>>> On 23/11/2022 14:23, Neil Armstrong wrote: >>>>> Hi, >>>>> >>>>> On 23/11/2022 12:16, Yu Tu wrote: >>>>>> Hi Krzysztof, >>>>>> Thank you for your reply. >>>>>> >>>>>> On 2022/11/23 18:08, Krzysztof Kozlowski wrote: >>>>>>> [ EXTERNAL EMAIL ] >>>>>>> >>>>>>> On 23/11/2022 03:13, Yu Tu wrote: >>>>>>>> Add the S4 PLL clock controller found and bindings in the s4 SoC family. >>>>>>>> >>>>>>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>>>>>> --- >>>>>>>> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + >>>>>>> >>>>>>> This is v5 and still bindings are here? Bindings are always separate >>>>>>> patches. Use subject prefixes matching the subsystem (git log --oneline >>>>>>> -- ...). >>>>>>> >>>>>>> And this was split, wasn't it? What happened here?!? >>>>>> >>>>>> Put bindings and clock driver patch together from Jerome. Maybe you can read this chat history. >>>>>> https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ >>>>> >>>>> Jerome was asking you to send 2 patchsets, one with : >>>>> - bindings in separate patches >>>>> - drivers in separate patches >>>>> and a second with DT changes. >>> Indeed, this is what was asked. It is aligned with Krzysztof's request. >> >> According to your discussion, I still should send patches in the previous >> way in series. But I'm going to change it like you suggested. >> I don't know, am I getting it right? > > 3 people tried to explain this already and we all told you the same thing. > > * 1 patchset per maintainer: clk and dt > * bindings must be dedicated patches - never mixed with driver code. > > I strongly suggest that you take some time to (re)read: > * https://docs.kernel.org/process/submitting-patches.html > * https://docs.kernel.org/devicetree/bindings/submitting-patches.html > > If still unclear, please take some time to look at the kernel mailing > list archive and see how others have done the same things. > > Thx. I'll change it as you suggest.But I still don't understand what you suggested in V3. I remember discussing it with you at V3. https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ ">>>> Also it would be nice to split this in two series. >>>> Bindings and drivers in one, arm64 dt in the other. These changes goes >>>> in through different trees. >>> At present, Bindings, DTS and drivers are three series. Do you mean to put >>> Bindings and drivers together? If so, checkpatch.pl will report a warning. >> Yes because patches are not in yet so there is a good reason to ignore >> the warning. Warning will never show up on the actual tree if the >> patches are correctly ordered. > > I think Binding, DTS and drivers use three series and you said two series > is not a big problem. Three series are recommended for checkpatch.pl, I > think it should be easy for that to separate and merge。 No - There is only 2 series. 1 for the bindings and clock drivers and one for the DT once things are in" > >> >>> >>>>> >>>>> Then when the bindings + clocks patches are merged, a pull request of the bindings >>>>> can be done to me so I can merge it with DT. >>>>> >>>>>> >>>>>>> >>>>>>> >>>>>>>> MAINTAINERS | 1 + >>>>>>>> drivers/clk/meson/Kconfig | 13 + >>>>>>>> drivers/clk/meson/Makefile | 1 + >>>>>>>> drivers/clk/meson/s4-pll.c | 875 ++++++++++++++++++ >>>>>>>> drivers/clk/meson/s4-pll.h | 88 ++ >>>>>>>> .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + >>>>>>>> 7 files changed, 1059 insertions(+) >>>>>>>> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>>> create mode 100644 drivers/clk/meson/s4-pll.c >>>>>>>> create mode 100644 drivers/clk/meson/s4-pll.h >>>>>>>> create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>>> >>>>>>>> diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>>> new file mode 100644 >>>>>>>> index 000000000000..fd517e8ef14f >>>>>>>> --- /dev/null >>>>>>>> +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>>> @@ -0,0 +1,51 @@ >>>>>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>>>>>>> +%YAML 1.2 >>>>>>>> +--- >>>>>>>> +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# >>>>>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>>>>>>> + >>>>>>>> +title: Amlogic Meson S serials PLL Clock Controller >>>>>>>> + >>>>>>>> +maintainers: >>>>>>>> + - Neil Armstrong <narmstrong@baylibre.com> >>>>>>>> + - Jerome Brunet <jbrunet@baylibre.com> >>>>>>>> + - Yu Tu <yu.hu@amlogic.com> >>>>>>>> + >>>>>>> One blank line. >>>>>> >>>>>> I will delete this, on next version patch. >>>>>> >>>>>>> >>>>>>>> + >>>>>>>> +properties: >>>>>>>> + compatible: >>>>>>>> + const: amlogic,s4-pll-clkc >>>>>>>> + >>>>>>>> + reg: >>>>>>>> + maxItems: 1 >>>>>>>> + >>>>>>>> + clocks: >>>>>>>> + maxItems: 1 >>>>>>>> + >>>>>>>> + clock-names: >>>>>>>> + items: >>>>>>>> + - const: xtal >>>>>>>> + >>>>>>>> + "#clock-cells": >>>>>>>> + const: 1 >>>>>>>> + >>>>>>>> +required: >>>>>>>> + - compatible >>>>>>>> + - reg >>>>>>>> + - clocks >>>>>>>> + - clock-names >>>>>>>> + - "#clock-cells" >>>>>>>> + >>>>>>>> +additionalProperties: false >>>>>>>> + >>>>>>>> +examples: >>>>>>>> + - | >>>>>>>> + clkc_pll: clock-controller@fe008000 { >>>>>>>> + compatible = "amlogic,s4-pll-clkc"; >>>>>>>> + reg = <0xfe008000 0x1e8>; >>>>>>>> + clocks = <&xtal>; >>>>>>>> + clock-names = "xtal"; >>>>>>>> + #clock-cells = <1>; >>>>>>>> + }; >>>>>>> >>>>>>> >>>>>>>> +#endif /* __MESON_S4_PLL_H__ */ >>>>>>>> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>>> new file mode 100644 >>>>>>>> index 000000000000..345f87023886 >>>>>>>> --- /dev/null >>>>>>>> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>> >>>>>>> This belongs to bindings patch, not driver. >>>>>>> >>>>>>>> @@ -0,0 +1,30 @@ >>>>>>>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >>>>>>>> +/* >>>>>>>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >>>>>>>> + * Author: Yu Tu <yu.tu@amlogic.com> >>>>>>>> + */ >>>>>>>> + >>>>>>>> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>>>>> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>>>>> + >>>>>>>> +/* >>>>>>>> + * CLKID index values >>>>>>>> + */ >>>>>>>> + >>>>>>>> +#define CLKID_FIXED_PLL 1 >>>>>>>> +#define CLKID_FCLK_DIV2 3 >>>>>>> >>>>>>> Indexes start from 0 and are incremented by 1. Not by 2. >>>>>>> >>>>>>> NAK. >>>>>> >>>>>> I remember Jerome discussing this with you.You can look at this submission history. >>>>>> https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ >>>>> >>>>> Historically we did that by only exposing part of the numbers, controlling which >>>>> clocks were part of the bindings. >>>>> >>>>> But it seems this doesn't make sens anymore, maybe it would be time to put all the >>>>> clock ids in the bindings for this new SoC and break with the previous strategy. >>> Krzysztof and I agreed there is nothing wrong with the current >>> approach, I believe. >>> It does not prevent someone from using an un-exposed clock, sure, or >>> exposing it in the future if necessary. >>> However, I think it clearly shows that an un-exposed element is not >>> expected to be used by an external consumers. It should be enough to >>> trigger a discussion if this expectation is wrong. >>> >>>> >>>> So the outcome of the previous discussion was somewhere later in that >>>> thread: >>>> >>>>> It is just a choice to not expose some IDs. >>>>> It is not tied to the implementation at all. >>>>> I think we actually follow the rules and the idea behind it. >>>> >>>> >>>> Best regards, >>>> Krzysztof >>> . > > . _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings @ 2022-11-28 13:30 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-28 13:30 UTC (permalink / raw) To: Jerome Brunet, Krzysztof Kozlowski, neil.armstrong, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang Hi Jerome , On 2022/11/28 20:33, Jerome Brunet wrote: > [ EXTERNAL EMAIL ] > > > On Mon 28 Nov 2022 at 15:39, Yu Tu <yu.tu@amlogic.com> wrote: > >> Hi Jerome, >> Thank you for your reply. >> >> On 2022/11/25 17:23, Jerome Brunet wrote: >>> [ EXTERNAL EMAIL ] >>> On Wed 23 Nov 2022 at 14:53, Krzysztof Kozlowski >>> <krzysztof.kozlowski@linaro.org> wrote: >>> >>>> On 23/11/2022 14:23, Neil Armstrong wrote: >>>>> Hi, >>>>> >>>>> On 23/11/2022 12:16, Yu Tu wrote: >>>>>> Hi Krzysztof, >>>>>> Thank you for your reply. >>>>>> >>>>>> On 2022/11/23 18:08, Krzysztof Kozlowski wrote: >>>>>>> [ EXTERNAL EMAIL ] >>>>>>> >>>>>>> On 23/11/2022 03:13, Yu Tu wrote: >>>>>>>> Add the S4 PLL clock controller found and bindings in the s4 SoC family. >>>>>>>> >>>>>>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>>>>>> --- >>>>>>>> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + >>>>>>> >>>>>>> This is v5 and still bindings are here? Bindings are always separate >>>>>>> patches. Use subject prefixes matching the subsystem (git log --oneline >>>>>>> -- ...). >>>>>>> >>>>>>> And this was split, wasn't it? What happened here?!? >>>>>> >>>>>> Put bindings and clock driver patch together from Jerome. Maybe you can read this chat history. >>>>>> https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ >>>>> >>>>> Jerome was asking you to send 2 patchsets, one with : >>>>> - bindings in separate patches >>>>> - drivers in separate patches >>>>> and a second with DT changes. >>> Indeed, this is what was asked. It is aligned with Krzysztof's request. >> >> According to your discussion, I still should send patches in the previous >> way in series. But I'm going to change it like you suggested. >> I don't know, am I getting it right? > > 3 people tried to explain this already and we all told you the same thing. > > * 1 patchset per maintainer: clk and dt > * bindings must be dedicated patches - never mixed with driver code. > > I strongly suggest that you take some time to (re)read: > * https://docs.kernel.org/process/submitting-patches.html > * https://docs.kernel.org/devicetree/bindings/submitting-patches.html > > If still unclear, please take some time to look at the kernel mailing > list archive and see how others have done the same things. > > Thx. I'll change it as you suggest.But I still don't understand what you suggested in V3. I remember discussing it with you at V3. https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ ">>>> Also it would be nice to split this in two series. >>>> Bindings and drivers in one, arm64 dt in the other. These changes goes >>>> in through different trees. >>> At present, Bindings, DTS and drivers are three series. Do you mean to put >>> Bindings and drivers together? If so, checkpatch.pl will report a warning. >> Yes because patches are not in yet so there is a good reason to ignore >> the warning. Warning will never show up on the actual tree if the >> patches are correctly ordered. > > I think Binding, DTS and drivers use three series and you said two series > is not a big problem. Three series are recommended for checkpatch.pl, I > think it should be easy for that to separate and merge。 No - There is only 2 series. 1 for the bindings and clock drivers and one for the DT once things are in" > >> >>> >>>>> >>>>> Then when the bindings + clocks patches are merged, a pull request of the bindings >>>>> can be done to me so I can merge it with DT. >>>>> >>>>>> >>>>>>> >>>>>>> >>>>>>>> MAINTAINERS | 1 + >>>>>>>> drivers/clk/meson/Kconfig | 13 + >>>>>>>> drivers/clk/meson/Makefile | 1 + >>>>>>>> drivers/clk/meson/s4-pll.c | 875 ++++++++++++++++++ >>>>>>>> drivers/clk/meson/s4-pll.h | 88 ++ >>>>>>>> .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + >>>>>>>> 7 files changed, 1059 insertions(+) >>>>>>>> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>>> create mode 100644 drivers/clk/meson/s4-pll.c >>>>>>>> create mode 100644 drivers/clk/meson/s4-pll.h >>>>>>>> create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>>> >>>>>>>> diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>>> new file mode 100644 >>>>>>>> index 000000000000..fd517e8ef14f >>>>>>>> --- /dev/null >>>>>>>> +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>>> @@ -0,0 +1,51 @@ >>>>>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>>>>>>> +%YAML 1.2 >>>>>>>> +--- >>>>>>>> +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# >>>>>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>>>>>>> + >>>>>>>> +title: Amlogic Meson S serials PLL Clock Controller >>>>>>>> + >>>>>>>> +maintainers: >>>>>>>> + - Neil Armstrong <narmstrong@baylibre.com> >>>>>>>> + - Jerome Brunet <jbrunet@baylibre.com> >>>>>>>> + - Yu Tu <yu.hu@amlogic.com> >>>>>>>> + >>>>>>> One blank line. >>>>>> >>>>>> I will delete this, on next version patch. >>>>>> >>>>>>> >>>>>>>> + >>>>>>>> +properties: >>>>>>>> + compatible: >>>>>>>> + const: amlogic,s4-pll-clkc >>>>>>>> + >>>>>>>> + reg: >>>>>>>> + maxItems: 1 >>>>>>>> + >>>>>>>> + clocks: >>>>>>>> + maxItems: 1 >>>>>>>> + >>>>>>>> + clock-names: >>>>>>>> + items: >>>>>>>> + - const: xtal >>>>>>>> + >>>>>>>> + "#clock-cells": >>>>>>>> + const: 1 >>>>>>>> + >>>>>>>> +required: >>>>>>>> + - compatible >>>>>>>> + - reg >>>>>>>> + - clocks >>>>>>>> + - clock-names >>>>>>>> + - "#clock-cells" >>>>>>>> + >>>>>>>> +additionalProperties: false >>>>>>>> + >>>>>>>> +examples: >>>>>>>> + - | >>>>>>>> + clkc_pll: clock-controller@fe008000 { >>>>>>>> + compatible = "amlogic,s4-pll-clkc"; >>>>>>>> + reg = <0xfe008000 0x1e8>; >>>>>>>> + clocks = <&xtal>; >>>>>>>> + clock-names = "xtal"; >>>>>>>> + #clock-cells = <1>; >>>>>>>> + }; >>>>>>> >>>>>>> >>>>>>>> +#endif /* __MESON_S4_PLL_H__ */ >>>>>>>> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>>> new file mode 100644 >>>>>>>> index 000000000000..345f87023886 >>>>>>>> --- /dev/null >>>>>>>> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>> >>>>>>> This belongs to bindings patch, not driver. >>>>>>> >>>>>>>> @@ -0,0 +1,30 @@ >>>>>>>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >>>>>>>> +/* >>>>>>>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >>>>>>>> + * Author: Yu Tu <yu.tu@amlogic.com> >>>>>>>> + */ >>>>>>>> + >>>>>>>> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>>>>> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>>>>> + >>>>>>>> +/* >>>>>>>> + * CLKID index values >>>>>>>> + */ >>>>>>>> + >>>>>>>> +#define CLKID_FIXED_PLL 1 >>>>>>>> +#define CLKID_FCLK_DIV2 3 >>>>>>> >>>>>>> Indexes start from 0 and are incremented by 1. Not by 2. >>>>>>> >>>>>>> NAK. >>>>>> >>>>>> I remember Jerome discussing this with you.You can look at this submission history. >>>>>> https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ >>>>> >>>>> Historically we did that by only exposing part of the numbers, controlling which >>>>> clocks were part of the bindings. >>>>> >>>>> But it seems this doesn't make sens anymore, maybe it would be time to put all the >>>>> clock ids in the bindings for this new SoC and break with the previous strategy. >>> Krzysztof and I agreed there is nothing wrong with the current >>> approach, I believe. >>> It does not prevent someone from using an un-exposed clock, sure, or >>> exposing it in the future if necessary. >>> However, I think it clearly shows that an un-exposed element is not >>> expected to be used by an external consumers. It should be enough to >>> trigger a discussion if this expectation is wrong. >>> >>>> >>>> So the outcome of the previous discussion was somewhere later in that >>>> thread: >>>> >>>>> It is just a choice to not expose some IDs. >>>>> It is not tied to the implementation at all. >>>>> I think we actually follow the rules and the idea behind it. >>>> >>>> >>>> Best regards, >>>> Krzysztof >>> . > > . _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings @ 2022-11-28 13:30 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-28 13:30 UTC (permalink / raw) To: Jerome Brunet, Krzysztof Kozlowski, neil.armstrong, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang Hi Jerome , On 2022/11/28 20:33, Jerome Brunet wrote: > [ EXTERNAL EMAIL ] > > > On Mon 28 Nov 2022 at 15:39, Yu Tu <yu.tu@amlogic.com> wrote: > >> Hi Jerome, >> Thank you for your reply. >> >> On 2022/11/25 17:23, Jerome Brunet wrote: >>> [ EXTERNAL EMAIL ] >>> On Wed 23 Nov 2022 at 14:53, Krzysztof Kozlowski >>> <krzysztof.kozlowski@linaro.org> wrote: >>> >>>> On 23/11/2022 14:23, Neil Armstrong wrote: >>>>> Hi, >>>>> >>>>> On 23/11/2022 12:16, Yu Tu wrote: >>>>>> Hi Krzysztof, >>>>>> Thank you for your reply. >>>>>> >>>>>> On 2022/11/23 18:08, Krzysztof Kozlowski wrote: >>>>>>> [ EXTERNAL EMAIL ] >>>>>>> >>>>>>> On 23/11/2022 03:13, Yu Tu wrote: >>>>>>>> Add the S4 PLL clock controller found and bindings in the s4 SoC family. >>>>>>>> >>>>>>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>>>>>> --- >>>>>>>> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + >>>>>>> >>>>>>> This is v5 and still bindings are here? Bindings are always separate >>>>>>> patches. Use subject prefixes matching the subsystem (git log --oneline >>>>>>> -- ...). >>>>>>> >>>>>>> And this was split, wasn't it? What happened here?!? >>>>>> >>>>>> Put bindings and clock driver patch together from Jerome. Maybe you can read this chat history. >>>>>> https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ >>>>> >>>>> Jerome was asking you to send 2 patchsets, one with : >>>>> - bindings in separate patches >>>>> - drivers in separate patches >>>>> and a second with DT changes. >>> Indeed, this is what was asked. It is aligned with Krzysztof's request. >> >> According to your discussion, I still should send patches in the previous >> way in series. But I'm going to change it like you suggested. >> I don't know, am I getting it right? > > 3 people tried to explain this already and we all told you the same thing. > > * 1 patchset per maintainer: clk and dt > * bindings must be dedicated patches - never mixed with driver code. > > I strongly suggest that you take some time to (re)read: > * https://docs.kernel.org/process/submitting-patches.html > * https://docs.kernel.org/devicetree/bindings/submitting-patches.html > > If still unclear, please take some time to look at the kernel mailing > list archive and see how others have done the same things. > > Thx. I'll change it as you suggest.But I still don't understand what you suggested in V3. I remember discussing it with you at V3. https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ ">>>> Also it would be nice to split this in two series. >>>> Bindings and drivers in one, arm64 dt in the other. These changes goes >>>> in through different trees. >>> At present, Bindings, DTS and drivers are three series. Do you mean to put >>> Bindings and drivers together? If so, checkpatch.pl will report a warning. >> Yes because patches are not in yet so there is a good reason to ignore >> the warning. Warning will never show up on the actual tree if the >> patches are correctly ordered. > > I think Binding, DTS and drivers use three series and you said two series > is not a big problem. Three series are recommended for checkpatch.pl, I > think it should be easy for that to separate and merge。 No - There is only 2 series. 1 for the bindings and clock drivers and one for the DT once things are in" > >> >>> >>>>> >>>>> Then when the bindings + clocks patches are merged, a pull request of the bindings >>>>> can be done to me so I can merge it with DT. >>>>> >>>>>> >>>>>>> >>>>>>> >>>>>>>> MAINTAINERS | 1 + >>>>>>>> drivers/clk/meson/Kconfig | 13 + >>>>>>>> drivers/clk/meson/Makefile | 1 + >>>>>>>> drivers/clk/meson/s4-pll.c | 875 ++++++++++++++++++ >>>>>>>> drivers/clk/meson/s4-pll.h | 88 ++ >>>>>>>> .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + >>>>>>>> 7 files changed, 1059 insertions(+) >>>>>>>> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>>> create mode 100644 drivers/clk/meson/s4-pll.c >>>>>>>> create mode 100644 drivers/clk/meson/s4-pll.h >>>>>>>> create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>>> >>>>>>>> diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>>> new file mode 100644 >>>>>>>> index 000000000000..fd517e8ef14f >>>>>>>> --- /dev/null >>>>>>>> +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>>> @@ -0,0 +1,51 @@ >>>>>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>>>>>>> +%YAML 1.2 >>>>>>>> +--- >>>>>>>> +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# >>>>>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>>>>>>> + >>>>>>>> +title: Amlogic Meson S serials PLL Clock Controller >>>>>>>> + >>>>>>>> +maintainers: >>>>>>>> + - Neil Armstrong <narmstrong@baylibre.com> >>>>>>>> + - Jerome Brunet <jbrunet@baylibre.com> >>>>>>>> + - Yu Tu <yu.hu@amlogic.com> >>>>>>>> + >>>>>>> One blank line. >>>>>> >>>>>> I will delete this, on next version patch. >>>>>> >>>>>>> >>>>>>>> + >>>>>>>> +properties: >>>>>>>> + compatible: >>>>>>>> + const: amlogic,s4-pll-clkc >>>>>>>> + >>>>>>>> + reg: >>>>>>>> + maxItems: 1 >>>>>>>> + >>>>>>>> + clocks: >>>>>>>> + maxItems: 1 >>>>>>>> + >>>>>>>> + clock-names: >>>>>>>> + items: >>>>>>>> + - const: xtal >>>>>>>> + >>>>>>>> + "#clock-cells": >>>>>>>> + const: 1 >>>>>>>> + >>>>>>>> +required: >>>>>>>> + - compatible >>>>>>>> + - reg >>>>>>>> + - clocks >>>>>>>> + - clock-names >>>>>>>> + - "#clock-cells" >>>>>>>> + >>>>>>>> +additionalProperties: false >>>>>>>> + >>>>>>>> +examples: >>>>>>>> + - | >>>>>>>> + clkc_pll: clock-controller@fe008000 { >>>>>>>> + compatible = "amlogic,s4-pll-clkc"; >>>>>>>> + reg = <0xfe008000 0x1e8>; >>>>>>>> + clocks = <&xtal>; >>>>>>>> + clock-names = "xtal"; >>>>>>>> + #clock-cells = <1>; >>>>>>>> + }; >>>>>>> >>>>>>> >>>>>>>> +#endif /* __MESON_S4_PLL_H__ */ >>>>>>>> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>>> new file mode 100644 >>>>>>>> index 000000000000..345f87023886 >>>>>>>> --- /dev/null >>>>>>>> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>> >>>>>>> This belongs to bindings patch, not driver. >>>>>>> >>>>>>>> @@ -0,0 +1,30 @@ >>>>>>>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >>>>>>>> +/* >>>>>>>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >>>>>>>> + * Author: Yu Tu <yu.tu@amlogic.com> >>>>>>>> + */ >>>>>>>> + >>>>>>>> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>>>>> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>>>>> + >>>>>>>> +/* >>>>>>>> + * CLKID index values >>>>>>>> + */ >>>>>>>> + >>>>>>>> +#define CLKID_FIXED_PLL 1 >>>>>>>> +#define CLKID_FCLK_DIV2 3 >>>>>>> >>>>>>> Indexes start from 0 and are incremented by 1. Not by 2. >>>>>>> >>>>>>> NAK. >>>>>> >>>>>> I remember Jerome discussing this with you.You can look at this submission history. >>>>>> https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ >>>>> >>>>> Historically we did that by only exposing part of the numbers, controlling which >>>>> clocks were part of the bindings. >>>>> >>>>> But it seems this doesn't make sens anymore, maybe it would be time to put all the >>>>> clock ids in the bindings for this new SoC and break with the previous strategy. >>> Krzysztof and I agreed there is nothing wrong with the current >>> approach, I believe. >>> It does not prevent someone from using an un-exposed clock, sure, or >>> exposing it in the future if necessary. >>> However, I think it clearly shows that an un-exposed element is not >>> expected to be used by an external consumers. It should be enough to >>> trigger a discussion if this expectation is wrong. >>> >>>> >>>> So the outcome of the previous discussion was somewhere later in that >>>> thread: >>>> >>>>> It is just a choice to not expose some IDs. >>>>> It is not tied to the implementation at all. >>>>> I think we actually follow the rules and the idea behind it. >>>> >>>> >>>> Best regards, >>>> Krzysztof >>> . > > . ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings 2022-11-28 13:30 ` Yu Tu (?) @ 2022-12-01 8:36 ` neil.armstrong -1 siblings, 0 replies; 109+ messages in thread From: neil.armstrong @ 2022-12-01 8:36 UTC (permalink / raw) To: Yu Tu, Jerome Brunet, Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 28/11/2022 14:30, Yu Tu wrote: > Hi Jerome , > > On 2022/11/28 20:33, Jerome Brunet wrote: >> [ EXTERNAL EMAIL ] >> >> >> On Mon 28 Nov 2022 at 15:39, Yu Tu <yu.tu@amlogic.com> wrote: >> >>> Hi Jerome, >>> Thank you for your reply. >>> >>> On 2022/11/25 17:23, Jerome Brunet wrote: >>>> [ EXTERNAL EMAIL ] >>>> On Wed 23 Nov 2022 at 14:53, Krzysztof Kozlowski >>>> <krzysztof.kozlowski@linaro.org> wrote: >>>> >>>>> On 23/11/2022 14:23, Neil Armstrong wrote: >>>>>> Hi, >>>>>> >>>>>> On 23/11/2022 12:16, Yu Tu wrote: >>>>>>> Hi Krzysztof, >>>>>>> Thank you for your reply. >>>>>>> >>>>>>> On 2022/11/23 18:08, Krzysztof Kozlowski wrote: >>>>>>>> [ EXTERNAL EMAIL ] >>>>>>>> >>>>>>>> On 23/11/2022 03:13, Yu Tu wrote: >>>>>>>>> Add the S4 PLL clock controller found and bindings in the s4 SoC family. >>>>>>>>> >>>>>>>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>>>>>>> --- >>>>>>>>> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + >>>>>>>> >>>>>>>> This is v5 and still bindings are here? Bindings are always separate >>>>>>>> patches. Use subject prefixes matching the subsystem (git log --oneline >>>>>>>> -- ...). >>>>>>>> >>>>>>>> And this was split, wasn't it? What happened here?!? >>>>>>> >>>>>>> Put bindings and clock driver patch together from Jerome. Maybe you can read this chat history. >>>>>>> https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ >>>>>> >>>>>> Jerome was asking you to send 2 patchsets, one with : >>>>>> - bindings in separate patches >>>>>> - drivers in separate patches >>>>>> and a second with DT changes. >>>> Indeed, this is what was asked. It is aligned with Krzysztof's request. >>> >>> According to your discussion, I still should send patches in the previous >>> way in series. But I'm going to change it like you suggested. >>> I don't know, am I getting it right? >> >> 3 people tried to explain this already and we all told you the same thing. >> >> * 1 patchset per maintainer: clk and dt >> * bindings must be dedicated patches - never mixed with driver code. >> >> I strongly suggest that you take some time to (re)read: >> * https://docs.kernel.org/process/submitting-patches.html >> * https://docs.kernel.org/devicetree/bindings/submitting-patches.html >> >> If still unclear, please take some time to look at the kernel mailing >> list archive and see how others have done the same things. >> >> Thx. > > I'll change it as you suggest.But I still don't understand what you suggested in V3. > > I remember discussing it with you at V3. > https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ > > ">>>> Also it would be nice to split this in two series. > >>>> Bindings and drivers in one, arm64 dt in the other. These changes goes > >>>> in through different trees. > >>> At present, Bindings, DTS and drivers are three series. Do you mean to put > >>> Bindings and drivers together? If so, checkpatch.pl will report a warning. > >> Yes because patches are not in yet so there is a good reason to ignore > >> the warning. Warning will never show up on the actual tree if the > >> patches are correctly ordered. > > > > I think Binding, DTS and drivers use three series and you said two series > > is not a big problem. Three series are recommended for checkpatch.pl, I > > think it should be easy for that to separate and merge。 > > No - There is only 2 series. 1 for the bindings and clock drivers and > one for the DT once things are in" Please send the following emails: * First patchset [PATCH V6 0/3] clk: meson: Add S4 SoC PLL and Peripheral clock controller [PATCH v6 1/3] dt-bindings: clock: document Amlogic S4 SoC PLL & peripheral clock controller [PATCH v6 2/3] clk: meson: add support for Amlogic S4 SoC PLL [PATCH v6 3/3] clk: meson: add support for Amlogic S4 SoC peripheral clock controller 1) will contain only .yaml and dt-bindings include 2) will only have drivers/clk/meson changes 3) will only have drivers/clk/meson changes * Second patchset: [PATCH v1 0/2] arm64: dts: meson: Add S4 SoC PLL and Peripheral clock nodes [PATCH v1 1/2] arm64: dts: meson: add S4 Soc PLL clock controller node [PATCH v1 2/2] arm64: dts: meson: add S4 Soc Peripheral clock controller node 1) is the patch 3 of v5 patchset 2) is the patch 4 of v5 patchset And in the second cover letter, explain those patches comes from the previous V5 patchset and add a link to the V6 "drivers + bindings" patchset as a dependency. Neil > >> >>> >>>> >>>>>> >>>>>> Then when the bindings + clocks patches are merged, a pull request of the bindings >>>>>> can be done to me so I can merge it with DT. >>>>>> >>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> MAINTAINERS | 1 + >>>>>>>>> drivers/clk/meson/Kconfig | 13 + >>>>>>>>> drivers/clk/meson/Makefile | 1 + >>>>>>>>> drivers/clk/meson/s4-pll.c | 875 ++++++++++++++++++ >>>>>>>>> drivers/clk/meson/s4-pll.h | 88 ++ >>>>>>>>> .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + >>>>>>>>> 7 files changed, 1059 insertions(+) >>>>>>>>> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>>>> create mode 100644 drivers/clk/meson/s4-pll.c >>>>>>>>> create mode 100644 drivers/clk/meson/s4-pll.h >>>>>>>>> create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>>>> >>>>>>>>> diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>>>> new file mode 100644 >>>>>>>>> index 000000000000..fd517e8ef14f >>>>>>>>> --- /dev/null >>>>>>>>> +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>>>> @@ -0,0 +1,51 @@ >>>>>>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>>>>>>>> +%YAML 1.2 >>>>>>>>> +--- >>>>>>>>> +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# >>>>>>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>>>>>>>> + >>>>>>>>> +title: Amlogic Meson S serials PLL Clock Controller >>>>>>>>> + >>>>>>>>> +maintainers: >>>>>>>>> + - Neil Armstrong <narmstrong@baylibre.com> >>>>>>>>> + - Jerome Brunet <jbrunet@baylibre.com> >>>>>>>>> + - Yu Tu <yu.hu@amlogic.com> >>>>>>>>> + >>>>>>>> One blank line. >>>>>>> >>>>>>> I will delete this, on next version patch. >>>>>>> >>>>>>>> >>>>>>>>> + >>>>>>>>> +properties: >>>>>>>>> + compatible: >>>>>>>>> + const: amlogic,s4-pll-clkc >>>>>>>>> + >>>>>>>>> + reg: >>>>>>>>> + maxItems: 1 >>>>>>>>> + >>>>>>>>> + clocks: >>>>>>>>> + maxItems: 1 >>>>>>>>> + >>>>>>>>> + clock-names: >>>>>>>>> + items: >>>>>>>>> + - const: xtal >>>>>>>>> + >>>>>>>>> + "#clock-cells": >>>>>>>>> + const: 1 >>>>>>>>> + >>>>>>>>> +required: >>>>>>>>> + - compatible >>>>>>>>> + - reg >>>>>>>>> + - clocks >>>>>>>>> + - clock-names >>>>>>>>> + - "#clock-cells" >>>>>>>>> + >>>>>>>>> +additionalProperties: false >>>>>>>>> + >>>>>>>>> +examples: >>>>>>>>> + - | >>>>>>>>> + clkc_pll: clock-controller@fe008000 { >>>>>>>>> + compatible = "amlogic,s4-pll-clkc"; >>>>>>>>> + reg = <0xfe008000 0x1e8>; >>>>>>>>> + clocks = <&xtal>; >>>>>>>>> + clock-names = "xtal"; >>>>>>>>> + #clock-cells = <1>; >>>>>>>>> + }; >>>>>>>> >>>>>>>> >>>>>>>>> +#endif /* __MESON_S4_PLL_H__ */ >>>>>>>>> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>>>> new file mode 100644 >>>>>>>>> index 000000000000..345f87023886 >>>>>>>>> --- /dev/null >>>>>>>>> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>>> >>>>>>>> This belongs to bindings patch, not driver. >>>>>>>> >>>>>>>>> @@ -0,0 +1,30 @@ >>>>>>>>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >>>>>>>>> +/* >>>>>>>>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >>>>>>>>> + * Author: Yu Tu <yu.tu@amlogic.com> >>>>>>>>> + */ >>>>>>>>> + >>>>>>>>> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>>>>>> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>>>>>> + >>>>>>>>> +/* >>>>>>>>> + * CLKID index values >>>>>>>>> + */ >>>>>>>>> + >>>>>>>>> +#define CLKID_FIXED_PLL 1 >>>>>>>>> +#define CLKID_FCLK_DIV2 3 >>>>>>>> >>>>>>>> Indexes start from 0 and are incremented by 1. Not by 2. >>>>>>>> >>>>>>>> NAK. >>>>>>> >>>>>>> I remember Jerome discussing this with you.You can look at this submission history. >>>>>>> https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ >>>>>> >>>>>> Historically we did that by only exposing part of the numbers, controlling which >>>>>> clocks were part of the bindings. >>>>>> >>>>>> But it seems this doesn't make sens anymore, maybe it would be time to put all the >>>>>> clock ids in the bindings for this new SoC and break with the previous strategy. >>>> Krzysztof and I agreed there is nothing wrong with the current >>>> approach, I believe. >>>> It does not prevent someone from using an un-exposed clock, sure, or >>>> exposing it in the future if necessary. >>>> However, I think it clearly shows that an un-exposed element is not >>>> expected to be used by an external consumers. It should be enough to >>>> trigger a discussion if this expectation is wrong. >>>> >>>>> >>>>> So the outcome of the previous discussion was somewhere later in that >>>>> thread: >>>>> >>>>>> It is just a choice to not expose some IDs. >>>>>> It is not tied to the implementation at all. >>>>>> I think we actually follow the rules and the idea behind it. >>>>> >>>>> >>>>> Best regards, >>>>> Krzysztof >>>> . >> >> . ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings @ 2022-12-01 8:36 ` neil.armstrong 0 siblings, 0 replies; 109+ messages in thread From: neil.armstrong @ 2022-12-01 8:36 UTC (permalink / raw) To: Yu Tu, Jerome Brunet, Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 28/11/2022 14:30, Yu Tu wrote: > Hi Jerome , > > On 2022/11/28 20:33, Jerome Brunet wrote: >> [ EXTERNAL EMAIL ] >> >> >> On Mon 28 Nov 2022 at 15:39, Yu Tu <yu.tu@amlogic.com> wrote: >> >>> Hi Jerome, >>> Thank you for your reply. >>> >>> On 2022/11/25 17:23, Jerome Brunet wrote: >>>> [ EXTERNAL EMAIL ] >>>> On Wed 23 Nov 2022 at 14:53, Krzysztof Kozlowski >>>> <krzysztof.kozlowski@linaro.org> wrote: >>>> >>>>> On 23/11/2022 14:23, Neil Armstrong wrote: >>>>>> Hi, >>>>>> >>>>>> On 23/11/2022 12:16, Yu Tu wrote: >>>>>>> Hi Krzysztof, >>>>>>> Thank you for your reply. >>>>>>> >>>>>>> On 2022/11/23 18:08, Krzysztof Kozlowski wrote: >>>>>>>> [ EXTERNAL EMAIL ] >>>>>>>> >>>>>>>> On 23/11/2022 03:13, Yu Tu wrote: >>>>>>>>> Add the S4 PLL clock controller found and bindings in the s4 SoC family. >>>>>>>>> >>>>>>>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>>>>>>> --- >>>>>>>>> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + >>>>>>>> >>>>>>>> This is v5 and still bindings are here? Bindings are always separate >>>>>>>> patches. Use subject prefixes matching the subsystem (git log --oneline >>>>>>>> -- ...). >>>>>>>> >>>>>>>> And this was split, wasn't it? What happened here?!? >>>>>>> >>>>>>> Put bindings and clock driver patch together from Jerome. Maybe you can read this chat history. >>>>>>> https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ >>>>>> >>>>>> Jerome was asking you to send 2 patchsets, one with : >>>>>> - bindings in separate patches >>>>>> - drivers in separate patches >>>>>> and a second with DT changes. >>>> Indeed, this is what was asked. It is aligned with Krzysztof's request. >>> >>> According to your discussion, I still should send patches in the previous >>> way in series. But I'm going to change it like you suggested. >>> I don't know, am I getting it right? >> >> 3 people tried to explain this already and we all told you the same thing. >> >> * 1 patchset per maintainer: clk and dt >> * bindings must be dedicated patches - never mixed with driver code. >> >> I strongly suggest that you take some time to (re)read: >> * https://docs.kernel.org/process/submitting-patches.html >> * https://docs.kernel.org/devicetree/bindings/submitting-patches.html >> >> If still unclear, please take some time to look at the kernel mailing >> list archive and see how others have done the same things. >> >> Thx. > > I'll change it as you suggest.But I still don't understand what you suggested in V3. > > I remember discussing it with you at V3. > https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ > > ">>>> Also it would be nice to split this in two series. > >>>> Bindings and drivers in one, arm64 dt in the other. These changes goes > >>>> in through different trees. > >>> At present, Bindings, DTS and drivers are three series. Do you mean to put > >>> Bindings and drivers together? If so, checkpatch.pl will report a warning. > >> Yes because patches are not in yet so there is a good reason to ignore > >> the warning. Warning will never show up on the actual tree if the > >> patches are correctly ordered. > > > > I think Binding, DTS and drivers use three series and you said two series > > is not a big problem. Three series are recommended for checkpatch.pl, I > > think it should be easy for that to separate and merge。 > > No - There is only 2 series. 1 for the bindings and clock drivers and > one for the DT once things are in" Please send the following emails: * First patchset [PATCH V6 0/3] clk: meson: Add S4 SoC PLL and Peripheral clock controller [PATCH v6 1/3] dt-bindings: clock: document Amlogic S4 SoC PLL & peripheral clock controller [PATCH v6 2/3] clk: meson: add support for Amlogic S4 SoC PLL [PATCH v6 3/3] clk: meson: add support for Amlogic S4 SoC peripheral clock controller 1) will contain only .yaml and dt-bindings include 2) will only have drivers/clk/meson changes 3) will only have drivers/clk/meson changes * Second patchset: [PATCH v1 0/2] arm64: dts: meson: Add S4 SoC PLL and Peripheral clock nodes [PATCH v1 1/2] arm64: dts: meson: add S4 Soc PLL clock controller node [PATCH v1 2/2] arm64: dts: meson: add S4 Soc Peripheral clock controller node 1) is the patch 3 of v5 patchset 2) is the patch 4 of v5 patchset And in the second cover letter, explain those patches comes from the previous V5 patchset and add a link to the V6 "drivers + bindings" patchset as a dependency. Neil > >> >>> >>>> >>>>>> >>>>>> Then when the bindings + clocks patches are merged, a pull request of the bindings >>>>>> can be done to me so I can merge it with DT. >>>>>> >>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> MAINTAINERS | 1 + >>>>>>>>> drivers/clk/meson/Kconfig | 13 + >>>>>>>>> drivers/clk/meson/Makefile | 1 + >>>>>>>>> drivers/clk/meson/s4-pll.c | 875 ++++++++++++++++++ >>>>>>>>> drivers/clk/meson/s4-pll.h | 88 ++ >>>>>>>>> .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + >>>>>>>>> 7 files changed, 1059 insertions(+) >>>>>>>>> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>>>> create mode 100644 drivers/clk/meson/s4-pll.c >>>>>>>>> create mode 100644 drivers/clk/meson/s4-pll.h >>>>>>>>> create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>>>> >>>>>>>>> diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>>>> new file mode 100644 >>>>>>>>> index 000000000000..fd517e8ef14f >>>>>>>>> --- /dev/null >>>>>>>>> +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>>>> @@ -0,0 +1,51 @@ >>>>>>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>>>>>>>> +%YAML 1.2 >>>>>>>>> +--- >>>>>>>>> +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# >>>>>>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>>>>>>>> + >>>>>>>>> +title: Amlogic Meson S serials PLL Clock Controller >>>>>>>>> + >>>>>>>>> +maintainers: >>>>>>>>> + - Neil Armstrong <narmstrong@baylibre.com> >>>>>>>>> + - Jerome Brunet <jbrunet@baylibre.com> >>>>>>>>> + - Yu Tu <yu.hu@amlogic.com> >>>>>>>>> + >>>>>>>> One blank line. >>>>>>> >>>>>>> I will delete this, on next version patch. >>>>>>> >>>>>>>> >>>>>>>>> + >>>>>>>>> +properties: >>>>>>>>> + compatible: >>>>>>>>> + const: amlogic,s4-pll-clkc >>>>>>>>> + >>>>>>>>> + reg: >>>>>>>>> + maxItems: 1 >>>>>>>>> + >>>>>>>>> + clocks: >>>>>>>>> + maxItems: 1 >>>>>>>>> + >>>>>>>>> + clock-names: >>>>>>>>> + items: >>>>>>>>> + - const: xtal >>>>>>>>> + >>>>>>>>> + "#clock-cells": >>>>>>>>> + const: 1 >>>>>>>>> + >>>>>>>>> +required: >>>>>>>>> + - compatible >>>>>>>>> + - reg >>>>>>>>> + - clocks >>>>>>>>> + - clock-names >>>>>>>>> + - "#clock-cells" >>>>>>>>> + >>>>>>>>> +additionalProperties: false >>>>>>>>> + >>>>>>>>> +examples: >>>>>>>>> + - | >>>>>>>>> + clkc_pll: clock-controller@fe008000 { >>>>>>>>> + compatible = "amlogic,s4-pll-clkc"; >>>>>>>>> + reg = <0xfe008000 0x1e8>; >>>>>>>>> + clocks = <&xtal>; >>>>>>>>> + clock-names = "xtal"; >>>>>>>>> + #clock-cells = <1>; >>>>>>>>> + }; >>>>>>>> >>>>>>>> >>>>>>>>> +#endif /* __MESON_S4_PLL_H__ */ >>>>>>>>> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>>>> new file mode 100644 >>>>>>>>> index 000000000000..345f87023886 >>>>>>>>> --- /dev/null >>>>>>>>> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>>> >>>>>>>> This belongs to bindings patch, not driver. >>>>>>>> >>>>>>>>> @@ -0,0 +1,30 @@ >>>>>>>>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >>>>>>>>> +/* >>>>>>>>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >>>>>>>>> + * Author: Yu Tu <yu.tu@amlogic.com> >>>>>>>>> + */ >>>>>>>>> + >>>>>>>>> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>>>>>> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>>>>>> + >>>>>>>>> +/* >>>>>>>>> + * CLKID index values >>>>>>>>> + */ >>>>>>>>> + >>>>>>>>> +#define CLKID_FIXED_PLL 1 >>>>>>>>> +#define CLKID_FCLK_DIV2 3 >>>>>>>> >>>>>>>> Indexes start from 0 and are incremented by 1. Not by 2. >>>>>>>> >>>>>>>> NAK. >>>>>>> >>>>>>> I remember Jerome discussing this with you.You can look at this submission history. >>>>>>> https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ >>>>>> >>>>>> Historically we did that by only exposing part of the numbers, controlling which >>>>>> clocks were part of the bindings. >>>>>> >>>>>> But it seems this doesn't make sens anymore, maybe it would be time to put all the >>>>>> clock ids in the bindings for this new SoC and break with the previous strategy. >>>> Krzysztof and I agreed there is nothing wrong with the current >>>> approach, I believe. >>>> It does not prevent someone from using an un-exposed clock, sure, or >>>> exposing it in the future if necessary. >>>> However, I think it clearly shows that an un-exposed element is not >>>> expected to be used by an external consumers. It should be enough to >>>> trigger a discussion if this expectation is wrong. >>>> >>>>> >>>>> So the outcome of the previous discussion was somewhere later in that >>>>> thread: >>>>> >>>>>> It is just a choice to not expose some IDs. >>>>>> It is not tied to the implementation at all. >>>>>> I think we actually follow the rules and the idea behind it. >>>>> >>>>> >>>>> Best regards, >>>>> Krzysztof >>>> . >> >> . _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings @ 2022-12-01 8:36 ` neil.armstrong 0 siblings, 0 replies; 109+ messages in thread From: neil.armstrong @ 2022-12-01 8:36 UTC (permalink / raw) To: Yu Tu, Jerome Brunet, Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 28/11/2022 14:30, Yu Tu wrote: > Hi Jerome , > > On 2022/11/28 20:33, Jerome Brunet wrote: >> [ EXTERNAL EMAIL ] >> >> >> On Mon 28 Nov 2022 at 15:39, Yu Tu <yu.tu@amlogic.com> wrote: >> >>> Hi Jerome, >>> Thank you for your reply. >>> >>> On 2022/11/25 17:23, Jerome Brunet wrote: >>>> [ EXTERNAL EMAIL ] >>>> On Wed 23 Nov 2022 at 14:53, Krzysztof Kozlowski >>>> <krzysztof.kozlowski@linaro.org> wrote: >>>> >>>>> On 23/11/2022 14:23, Neil Armstrong wrote: >>>>>> Hi, >>>>>> >>>>>> On 23/11/2022 12:16, Yu Tu wrote: >>>>>>> Hi Krzysztof, >>>>>>> Thank you for your reply. >>>>>>> >>>>>>> On 2022/11/23 18:08, Krzysztof Kozlowski wrote: >>>>>>>> [ EXTERNAL EMAIL ] >>>>>>>> >>>>>>>> On 23/11/2022 03:13, Yu Tu wrote: >>>>>>>>> Add the S4 PLL clock controller found and bindings in the s4 SoC family. >>>>>>>>> >>>>>>>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>>>>>>> --- >>>>>>>>> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + >>>>>>>> >>>>>>>> This is v5 and still bindings are here? Bindings are always separate >>>>>>>> patches. Use subject prefixes matching the subsystem (git log --oneline >>>>>>>> -- ...). >>>>>>>> >>>>>>>> And this was split, wasn't it? What happened here?!? >>>>>>> >>>>>>> Put bindings and clock driver patch together from Jerome. Maybe you can read this chat history. >>>>>>> https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ >>>>>> >>>>>> Jerome was asking you to send 2 patchsets, one with : >>>>>> - bindings in separate patches >>>>>> - drivers in separate patches >>>>>> and a second with DT changes. >>>> Indeed, this is what was asked. It is aligned with Krzysztof's request. >>> >>> According to your discussion, I still should send patches in the previous >>> way in series. But I'm going to change it like you suggested. >>> I don't know, am I getting it right? >> >> 3 people tried to explain this already and we all told you the same thing. >> >> * 1 patchset per maintainer: clk and dt >> * bindings must be dedicated patches - never mixed with driver code. >> >> I strongly suggest that you take some time to (re)read: >> * https://docs.kernel.org/process/submitting-patches.html >> * https://docs.kernel.org/devicetree/bindings/submitting-patches.html >> >> If still unclear, please take some time to look at the kernel mailing >> list archive and see how others have done the same things. >> >> Thx. > > I'll change it as you suggest.But I still don't understand what you suggested in V3. > > I remember discussing it with you at V3. > https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ > > ">>>> Also it would be nice to split this in two series. > >>>> Bindings and drivers in one, arm64 dt in the other. These changes goes > >>>> in through different trees. > >>> At present, Bindings, DTS and drivers are three series. Do you mean to put > >>> Bindings and drivers together? If so, checkpatch.pl will report a warning. > >> Yes because patches are not in yet so there is a good reason to ignore > >> the warning. Warning will never show up on the actual tree if the > >> patches are correctly ordered. > > > > I think Binding, DTS and drivers use three series and you said two series > > is not a big problem. Three series are recommended for checkpatch.pl, I > > think it should be easy for that to separate and merge。 > > No - There is only 2 series. 1 for the bindings and clock drivers and > one for the DT once things are in" Please send the following emails: * First patchset [PATCH V6 0/3] clk: meson: Add S4 SoC PLL and Peripheral clock controller [PATCH v6 1/3] dt-bindings: clock: document Amlogic S4 SoC PLL & peripheral clock controller [PATCH v6 2/3] clk: meson: add support for Amlogic S4 SoC PLL [PATCH v6 3/3] clk: meson: add support for Amlogic S4 SoC peripheral clock controller 1) will contain only .yaml and dt-bindings include 2) will only have drivers/clk/meson changes 3) will only have drivers/clk/meson changes * Second patchset: [PATCH v1 0/2] arm64: dts: meson: Add S4 SoC PLL and Peripheral clock nodes [PATCH v1 1/2] arm64: dts: meson: add S4 Soc PLL clock controller node [PATCH v1 2/2] arm64: dts: meson: add S4 Soc Peripheral clock controller node 1) is the patch 3 of v5 patchset 2) is the patch 4 of v5 patchset And in the second cover letter, explain those patches comes from the previous V5 patchset and add a link to the V6 "drivers + bindings" patchset as a dependency. Neil > >> >>> >>>> >>>>>> >>>>>> Then when the bindings + clocks patches are merged, a pull request of the bindings >>>>>> can be done to me so I can merge it with DT. >>>>>> >>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> MAINTAINERS | 1 + >>>>>>>>> drivers/clk/meson/Kconfig | 13 + >>>>>>>>> drivers/clk/meson/Makefile | 1 + >>>>>>>>> drivers/clk/meson/s4-pll.c | 875 ++++++++++++++++++ >>>>>>>>> drivers/clk/meson/s4-pll.h | 88 ++ >>>>>>>>> .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + >>>>>>>>> 7 files changed, 1059 insertions(+) >>>>>>>>> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>>>> create mode 100644 drivers/clk/meson/s4-pll.c >>>>>>>>> create mode 100644 drivers/clk/meson/s4-pll.h >>>>>>>>> create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>>>> >>>>>>>>> diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>>>> new file mode 100644 >>>>>>>>> index 000000000000..fd517e8ef14f >>>>>>>>> --- /dev/null >>>>>>>>> +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>>>> @@ -0,0 +1,51 @@ >>>>>>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>>>>>>>> +%YAML 1.2 >>>>>>>>> +--- >>>>>>>>> +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# >>>>>>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>>>>>>>> + >>>>>>>>> +title: Amlogic Meson S serials PLL Clock Controller >>>>>>>>> + >>>>>>>>> +maintainers: >>>>>>>>> + - Neil Armstrong <narmstrong@baylibre.com> >>>>>>>>> + - Jerome Brunet <jbrunet@baylibre.com> >>>>>>>>> + - Yu Tu <yu.hu@amlogic.com> >>>>>>>>> + >>>>>>>> One blank line. >>>>>>> >>>>>>> I will delete this, on next version patch. >>>>>>> >>>>>>>> >>>>>>>>> + >>>>>>>>> +properties: >>>>>>>>> + compatible: >>>>>>>>> + const: amlogic,s4-pll-clkc >>>>>>>>> + >>>>>>>>> + reg: >>>>>>>>> + maxItems: 1 >>>>>>>>> + >>>>>>>>> + clocks: >>>>>>>>> + maxItems: 1 >>>>>>>>> + >>>>>>>>> + clock-names: >>>>>>>>> + items: >>>>>>>>> + - const: xtal >>>>>>>>> + >>>>>>>>> + "#clock-cells": >>>>>>>>> + const: 1 >>>>>>>>> + >>>>>>>>> +required: >>>>>>>>> + - compatible >>>>>>>>> + - reg >>>>>>>>> + - clocks >>>>>>>>> + - clock-names >>>>>>>>> + - "#clock-cells" >>>>>>>>> + >>>>>>>>> +additionalProperties: false >>>>>>>>> + >>>>>>>>> +examples: >>>>>>>>> + - | >>>>>>>>> + clkc_pll: clock-controller@fe008000 { >>>>>>>>> + compatible = "amlogic,s4-pll-clkc"; >>>>>>>>> + reg = <0xfe008000 0x1e8>; >>>>>>>>> + clocks = <&xtal>; >>>>>>>>> + clock-names = "xtal"; >>>>>>>>> + #clock-cells = <1>; >>>>>>>>> + }; >>>>>>>> >>>>>>>> >>>>>>>>> +#endif /* __MESON_S4_PLL_H__ */ >>>>>>>>> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>>>> new file mode 100644 >>>>>>>>> index 000000000000..345f87023886 >>>>>>>>> --- /dev/null >>>>>>>>> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>>> >>>>>>>> This belongs to bindings patch, not driver. >>>>>>>> >>>>>>>>> @@ -0,0 +1,30 @@ >>>>>>>>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >>>>>>>>> +/* >>>>>>>>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >>>>>>>>> + * Author: Yu Tu <yu.tu@amlogic.com> >>>>>>>>> + */ >>>>>>>>> + >>>>>>>>> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>>>>>> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>>>>>> + >>>>>>>>> +/* >>>>>>>>> + * CLKID index values >>>>>>>>> + */ >>>>>>>>> + >>>>>>>>> +#define CLKID_FIXED_PLL 1 >>>>>>>>> +#define CLKID_FCLK_DIV2 3 >>>>>>>> >>>>>>>> Indexes start from 0 and are incremented by 1. Not by 2. >>>>>>>> >>>>>>>> NAK. >>>>>>> >>>>>>> I remember Jerome discussing this with you.You can look at this submission history. >>>>>>> https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ >>>>>> >>>>>> Historically we did that by only exposing part of the numbers, controlling which >>>>>> clocks were part of the bindings. >>>>>> >>>>>> But it seems this doesn't make sens anymore, maybe it would be time to put all the >>>>>> clock ids in the bindings for this new SoC and break with the previous strategy. >>>> Krzysztof and I agreed there is nothing wrong with the current >>>> approach, I believe. >>>> It does not prevent someone from using an un-exposed clock, sure, or >>>> exposing it in the future if necessary. >>>> However, I think it clearly shows that an un-exposed element is not >>>> expected to be used by an external consumers. It should be enough to >>>> trigger a discussion if this expectation is wrong. >>>> >>>>> >>>>> So the outcome of the previous discussion was somewhere later in that >>>>> thread: >>>>> >>>>>> It is just a choice to not expose some IDs. >>>>>> It is not tied to the implementation at all. >>>>>> I think we actually follow the rules and the idea behind it. >>>>> >>>>> >>>>> Best regards, >>>>> Krzysztof >>>> . >> >> . _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings 2022-12-01 8:36 ` neil.armstrong (?) @ 2022-12-01 11:33 ` Yu Tu -1 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-12-01 11:33 UTC (permalink / raw) To: neil.armstrong, Jerome Brunet, Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 2022/12/1 16:36, neil.armstrong@linaro.org wrote: > [ EXTERNAL EMAIL ] > > On 28/11/2022 14:30, Yu Tu wrote: >> Hi Jerome , >> >> On 2022/11/28 20:33, Jerome Brunet wrote: >>> [ EXTERNAL EMAIL ] >>> >>> >>> On Mon 28 Nov 2022 at 15:39, Yu Tu <yu.tu@amlogic.com> wrote: >>> >>>> Hi Jerome, >>>> Thank you for your reply. >>>> >>>> On 2022/11/25 17:23, Jerome Brunet wrote: >>>>> [ EXTERNAL EMAIL ] >>>>> On Wed 23 Nov 2022 at 14:53, Krzysztof Kozlowski >>>>> <krzysztof.kozlowski@linaro.org> wrote: >>>>> >>>>>> On 23/11/2022 14:23, Neil Armstrong wrote: >>>>>>> Hi, >>>>>>> >>>>>>> On 23/11/2022 12:16, Yu Tu wrote: >>>>>>>> Hi Krzysztof, >>>>>>>> Thank you for your reply. >>>>>>>> >>>>>>>> On 2022/11/23 18:08, Krzysztof Kozlowski wrote: >>>>>>>>> [ EXTERNAL EMAIL ] >>>>>>>>> >>>>>>>>> On 23/11/2022 03:13, Yu Tu wrote: >>>>>>>>>> Add the S4 PLL clock controller found and bindings in the s4 >>>>>>>>>> SoC family. >>>>>>>>>> >>>>>>>>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>>>>>>>> --- >>>>>>>>>> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + >>>>>>>>> >>>>>>>>> This is v5 and still bindings are here? Bindings are always >>>>>>>>> separate >>>>>>>>> patches. Use subject prefixes matching the subsystem (git log >>>>>>>>> --oneline >>>>>>>>> -- ...). >>>>>>>>> >>>>>>>>> And this was split, wasn't it? What happened here?!? >>>>>>>> >>>>>>>> Put bindings and clock driver patch together from Jerome. Maybe >>>>>>>> you can read this chat history. >>>>>>>> https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ >>>>>>> >>>>>>> Jerome was asking you to send 2 patchsets, one with : >>>>>>> - bindings in separate patches >>>>>>> - drivers in separate patches >>>>>>> and a second with DT changes. >>>>> Indeed, this is what was asked. It is aligned with Krzysztof's >>>>> request. >>>> >>>> According to your discussion, I still should send patches in the >>>> previous >>>> way in series. But I'm going to change it like you suggested. >>>> I don't know, am I getting it right? >>> >>> 3 people tried to explain this already and we all told you the same >>> thing. >>> >>> * 1 patchset per maintainer: clk and dt >>> * bindings must be dedicated patches - never mixed with driver code. >>> >>> I strongly suggest that you take some time to (re)read: >>> * https://docs.kernel.org/process/submitting-patches.html >>> * https://docs.kernel.org/devicetree/bindings/submitting-patches.html >>> >>> If still unclear, please take some time to look at the kernel mailing >>> list archive and see how others have done the same things. >>> >>> Thx. >> >> I'll change it as you suggest.But I still don't understand what you >> suggested in V3. >> >> I remember discussing it with you at V3. >> https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ >> >> ">>>> Also it would be nice to split this in two series. >> >>>> Bindings and drivers in one, arm64 dt in the other. These >> changes goes >> >>>> in through different trees. >> >>> At present, Bindings, DTS and drivers are three series. Do you >> mean to put >> >>> Bindings and drivers together? If so, checkpatch.pl will report a >> warning. >> >> Yes because patches are not in yet so there is a good reason to >> ignore >> >> the warning. Warning will never show up on the actual tree if the >> >> patches are correctly ordered. >> > >> > I think Binding, DTS and drivers use three series and you said two >> series >> > is not a big problem. Three series are recommended for >> checkpatch.pl, I >> > think it should be easy for that to separate and merge。 >> >> No - There is only 2 series. 1 for the bindings and clock drivers and >> one for the DT once things are in" > > Please send the following emails: > > * First patchset > > [PATCH V6 0/3] clk: meson: Add S4 SoC PLL and Peripheral clock controller > [PATCH v6 1/3] dt-bindings: clock: document Amlogic S4 SoC PLL & > peripheral clock controller > [PATCH v6 2/3] clk: meson: add support for Amlogic S4 SoC PLL > [PATCH v6 3/3] clk: meson: add support for Amlogic S4 SoC > peripheral clock controller > > 1) will contain only .yaml and dt-bindings include > 2) will only have drivers/clk/meson changes > 3) will only have drivers/clk/meson changes > > * Second patchset: > > [PATCH v1 0/2] arm64: dts: meson: Add S4 SoC PLL and Peripheral clock nodes > [PATCH v1 1/2] arm64: dts: meson: add S4 Soc PLL clock controller node > [PATCH v1 2/2] arm64: dts: meson: add S4 Soc Peripheral clock > controller node > > 1) is the patch 3 of v5 patchset > 2) is the patch 4 of v5 patchset > > And in the second cover letter, explain those patches comes from the > previous V5 patchset > and add a link to the V6 "drivers + bindings" patchset as a dependency. > > Neil Hi Neil, Thank you very much for your detailed explanation. >> >>> >>>> >>>>> >>>>>>> >>>>>>> Then when the bindings + clocks patches are merged, a pull >>>>>>> request of the bindings >>>>>>> can be done to me so I can merge it with DT. >>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>> MAINTAINERS | 1 + >>>>>>>>>> drivers/clk/meson/Kconfig | 13 + >>>>>>>>>> drivers/clk/meson/Makefile | 1 + >>>>>>>>>> drivers/clk/meson/s4-pll.c | 875 >>>>>>>>>> ++++++++++++++++++ >>>>>>>>>> drivers/clk/meson/s4-pll.h | 88 ++ >>>>>>>>>> .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + >>>>>>>>>> 7 files changed, 1059 insertions(+) >>>>>>>>>> create mode 100644 >>>>>>>>>> Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>>>>> create mode 100644 drivers/clk/meson/s4-pll.c >>>>>>>>>> create mode 100644 drivers/clk/meson/s4-pll.h >>>>>>>>>> create mode 100644 >>>>>>>>>> include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>>>>> >>>>>>>>>> diff --git >>>>>>>>>> a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>>>>> new file mode 100644 >>>>>>>>>> index 000000000000..fd517e8ef14f >>>>>>>>>> --- /dev/null >>>>>>>>>> +++ >>>>>>>>>> b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>>>>> @@ -0,0 +1,51 @@ >>>>>>>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>>>>>>>>> +%YAML 1.2 >>>>>>>>>> +--- >>>>>>>>>> +$id: >>>>>>>>>> http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# >>>>>>>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>>>>>>>>> + >>>>>>>>>> +title: Amlogic Meson S serials PLL Clock Controller >>>>>>>>>> + >>>>>>>>>> +maintainers: >>>>>>>>>> + - Neil Armstrong <narmstrong@baylibre.com> >>>>>>>>>> + - Jerome Brunet <jbrunet@baylibre.com> >>>>>>>>>> + - Yu Tu <yu.hu@amlogic.com> >>>>>>>>>> + >>>>>>>>> One blank line. >>>>>>>> >>>>>>>> I will delete this, on next version patch. >>>>>>>> >>>>>>>>> >>>>>>>>>> + >>>>>>>>>> +properties: >>>>>>>>>> + compatible: >>>>>>>>>> + const: amlogic,s4-pll-clkc >>>>>>>>>> + >>>>>>>>>> + reg: >>>>>>>>>> + maxItems: 1 >>>>>>>>>> + >>>>>>>>>> + clocks: >>>>>>>>>> + maxItems: 1 >>>>>>>>>> + >>>>>>>>>> + clock-names: >>>>>>>>>> + items: >>>>>>>>>> + - const: xtal >>>>>>>>>> + >>>>>>>>>> + "#clock-cells": >>>>>>>>>> + const: 1 >>>>>>>>>> + >>>>>>>>>> +required: >>>>>>>>>> + - compatible >>>>>>>>>> + - reg >>>>>>>>>> + - clocks >>>>>>>>>> + - clock-names >>>>>>>>>> + - "#clock-cells" >>>>>>>>>> + >>>>>>>>>> +additionalProperties: false >>>>>>>>>> + >>>>>>>>>> +examples: >>>>>>>>>> + - | >>>>>>>>>> + clkc_pll: clock-controller@fe008000 { >>>>>>>>>> + compatible = "amlogic,s4-pll-clkc"; >>>>>>>>>> + reg = <0xfe008000 0x1e8>; >>>>>>>>>> + clocks = <&xtal>; >>>>>>>>>> + clock-names = "xtal"; >>>>>>>>>> + #clock-cells = <1>; >>>>>>>>>> + }; >>>>>>>>> >>>>>>>>> >>>>>>>>>> +#endif /* __MESON_S4_PLL_H__ */ >>>>>>>>>> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>>>>> b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>>>>> new file mode 100644 >>>>>>>>>> index 000000000000..345f87023886 >>>>>>>>>> --- /dev/null >>>>>>>>>> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>>>> >>>>>>>>> This belongs to bindings patch, not driver. >>>>>>>>> >>>>>>>>>> @@ -0,0 +1,30 @@ >>>>>>>>>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >>>>>>>>>> +/* >>>>>>>>>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >>>>>>>>>> + * Author: Yu Tu <yu.tu@amlogic.com> >>>>>>>>>> + */ >>>>>>>>>> + >>>>>>>>>> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>>>>>>> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>>>>>>> + >>>>>>>>>> +/* >>>>>>>>>> + * CLKID index values >>>>>>>>>> + */ >>>>>>>>>> + >>>>>>>>>> +#define CLKID_FIXED_PLL 1 >>>>>>>>>> +#define CLKID_FCLK_DIV2 3 >>>>>>>>> >>>>>>>>> Indexes start from 0 and are incremented by 1. Not by 2. >>>>>>>>> >>>>>>>>> NAK. >>>>>>>> >>>>>>>> I remember Jerome discussing this with you.You can look at this >>>>>>>> submission history. >>>>>>>> https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ >>>>>>> >>>>>>> Historically we did that by only exposing part of the numbers, >>>>>>> controlling which >>>>>>> clocks were part of the bindings. >>>>>>> >>>>>>> But it seems this doesn't make sens anymore, maybe it would be >>>>>>> time to put all the >>>>>>> clock ids in the bindings for this new SoC and break with the >>>>>>> previous strategy. >>>>> Krzysztof and I agreed there is nothing wrong with the current >>>>> approach, I believe. >>>>> It does not prevent someone from using an un-exposed clock, sure, or >>>>> exposing it in the future if necessary. >>>>> However, I think it clearly shows that an un-exposed element is not >>>>> expected to be used by an external consumers. It should be enough to >>>>> trigger a discussion if this expectation is wrong. >>>>> >>>>>> >>>>>> So the outcome of the previous discussion was somewhere later in that >>>>>> thread: >>>>>> >>>>>>> It is just a choice to not expose some IDs. >>>>>>> It is not tied to the implementation at all. >>>>>>> I think we actually follow the rules and the idea behind it. >>>>>> >>>>>> >>>>>> Best regards, >>>>>> Krzysztof >>>>> . >>> >>> . > _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings @ 2022-12-01 11:33 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-12-01 11:33 UTC (permalink / raw) To: neil.armstrong, Jerome Brunet, Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 2022/12/1 16:36, neil.armstrong@linaro.org wrote: > [ EXTERNAL EMAIL ] > > On 28/11/2022 14:30, Yu Tu wrote: >> Hi Jerome , >> >> On 2022/11/28 20:33, Jerome Brunet wrote: >>> [ EXTERNAL EMAIL ] >>> >>> >>> On Mon 28 Nov 2022 at 15:39, Yu Tu <yu.tu@amlogic.com> wrote: >>> >>>> Hi Jerome, >>>> Thank you for your reply. >>>> >>>> On 2022/11/25 17:23, Jerome Brunet wrote: >>>>> [ EXTERNAL EMAIL ] >>>>> On Wed 23 Nov 2022 at 14:53, Krzysztof Kozlowski >>>>> <krzysztof.kozlowski@linaro.org> wrote: >>>>> >>>>>> On 23/11/2022 14:23, Neil Armstrong wrote: >>>>>>> Hi, >>>>>>> >>>>>>> On 23/11/2022 12:16, Yu Tu wrote: >>>>>>>> Hi Krzysztof, >>>>>>>> Thank you for your reply. >>>>>>>> >>>>>>>> On 2022/11/23 18:08, Krzysztof Kozlowski wrote: >>>>>>>>> [ EXTERNAL EMAIL ] >>>>>>>>> >>>>>>>>> On 23/11/2022 03:13, Yu Tu wrote: >>>>>>>>>> Add the S4 PLL clock controller found and bindings in the s4 >>>>>>>>>> SoC family. >>>>>>>>>> >>>>>>>>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>>>>>>>> --- >>>>>>>>>> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + >>>>>>>>> >>>>>>>>> This is v5 and still bindings are here? Bindings are always >>>>>>>>> separate >>>>>>>>> patches. Use subject prefixes matching the subsystem (git log >>>>>>>>> --oneline >>>>>>>>> -- ...). >>>>>>>>> >>>>>>>>> And this was split, wasn't it? What happened here?!? >>>>>>>> >>>>>>>> Put bindings and clock driver patch together from Jerome. Maybe >>>>>>>> you can read this chat history. >>>>>>>> https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ >>>>>>> >>>>>>> Jerome was asking you to send 2 patchsets, one with : >>>>>>> - bindings in separate patches >>>>>>> - drivers in separate patches >>>>>>> and a second with DT changes. >>>>> Indeed, this is what was asked. It is aligned with Krzysztof's >>>>> request. >>>> >>>> According to your discussion, I still should send patches in the >>>> previous >>>> way in series. But I'm going to change it like you suggested. >>>> I don't know, am I getting it right? >>> >>> 3 people tried to explain this already and we all told you the same >>> thing. >>> >>> * 1 patchset per maintainer: clk and dt >>> * bindings must be dedicated patches - never mixed with driver code. >>> >>> I strongly suggest that you take some time to (re)read: >>> * https://docs.kernel.org/process/submitting-patches.html >>> * https://docs.kernel.org/devicetree/bindings/submitting-patches.html >>> >>> If still unclear, please take some time to look at the kernel mailing >>> list archive and see how others have done the same things. >>> >>> Thx. >> >> I'll change it as you suggest.But I still don't understand what you >> suggested in V3. >> >> I remember discussing it with you at V3. >> https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ >> >> ">>>> Also it would be nice to split this in two series. >> >>>> Bindings and drivers in one, arm64 dt in the other. These >> changes goes >> >>>> in through different trees. >> >>> At present, Bindings, DTS and drivers are three series. Do you >> mean to put >> >>> Bindings and drivers together? If so, checkpatch.pl will report a >> warning. >> >> Yes because patches are not in yet so there is a good reason to >> ignore >> >> the warning. Warning will never show up on the actual tree if the >> >> patches are correctly ordered. >> > >> > I think Binding, DTS and drivers use three series and you said two >> series >> > is not a big problem. Three series are recommended for >> checkpatch.pl, I >> > think it should be easy for that to separate and merge。 >> >> No - There is only 2 series. 1 for the bindings and clock drivers and >> one for the DT once things are in" > > Please send the following emails: > > * First patchset > > [PATCH V6 0/3] clk: meson: Add S4 SoC PLL and Peripheral clock controller > [PATCH v6 1/3] dt-bindings: clock: document Amlogic S4 SoC PLL & > peripheral clock controller > [PATCH v6 2/3] clk: meson: add support for Amlogic S4 SoC PLL > [PATCH v6 3/3] clk: meson: add support for Amlogic S4 SoC > peripheral clock controller > > 1) will contain only .yaml and dt-bindings include > 2) will only have drivers/clk/meson changes > 3) will only have drivers/clk/meson changes > > * Second patchset: > > [PATCH v1 0/2] arm64: dts: meson: Add S4 SoC PLL and Peripheral clock nodes > [PATCH v1 1/2] arm64: dts: meson: add S4 Soc PLL clock controller node > [PATCH v1 2/2] arm64: dts: meson: add S4 Soc Peripheral clock > controller node > > 1) is the patch 3 of v5 patchset > 2) is the patch 4 of v5 patchset > > And in the second cover letter, explain those patches comes from the > previous V5 patchset > and add a link to the V6 "drivers + bindings" patchset as a dependency. > > Neil Hi Neil, Thank you very much for your detailed explanation. >> >>> >>>> >>>>> >>>>>>> >>>>>>> Then when the bindings + clocks patches are merged, a pull >>>>>>> request of the bindings >>>>>>> can be done to me so I can merge it with DT. >>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>> MAINTAINERS | 1 + >>>>>>>>>> drivers/clk/meson/Kconfig | 13 + >>>>>>>>>> drivers/clk/meson/Makefile | 1 + >>>>>>>>>> drivers/clk/meson/s4-pll.c | 875 >>>>>>>>>> ++++++++++++++++++ >>>>>>>>>> drivers/clk/meson/s4-pll.h | 88 ++ >>>>>>>>>> .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + >>>>>>>>>> 7 files changed, 1059 insertions(+) >>>>>>>>>> create mode 100644 >>>>>>>>>> Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>>>>> create mode 100644 drivers/clk/meson/s4-pll.c >>>>>>>>>> create mode 100644 drivers/clk/meson/s4-pll.h >>>>>>>>>> create mode 100644 >>>>>>>>>> include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>>>>> >>>>>>>>>> diff --git >>>>>>>>>> a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>>>>> new file mode 100644 >>>>>>>>>> index 000000000000..fd517e8ef14f >>>>>>>>>> --- /dev/null >>>>>>>>>> +++ >>>>>>>>>> b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>>>>> @@ -0,0 +1,51 @@ >>>>>>>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>>>>>>>>> +%YAML 1.2 >>>>>>>>>> +--- >>>>>>>>>> +$id: >>>>>>>>>> http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# >>>>>>>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>>>>>>>>> + >>>>>>>>>> +title: Amlogic Meson S serials PLL Clock Controller >>>>>>>>>> + >>>>>>>>>> +maintainers: >>>>>>>>>> + - Neil Armstrong <narmstrong@baylibre.com> >>>>>>>>>> + - Jerome Brunet <jbrunet@baylibre.com> >>>>>>>>>> + - Yu Tu <yu.hu@amlogic.com> >>>>>>>>>> + >>>>>>>>> One blank line. >>>>>>>> >>>>>>>> I will delete this, on next version patch. >>>>>>>> >>>>>>>>> >>>>>>>>>> + >>>>>>>>>> +properties: >>>>>>>>>> + compatible: >>>>>>>>>> + const: amlogic,s4-pll-clkc >>>>>>>>>> + >>>>>>>>>> + reg: >>>>>>>>>> + maxItems: 1 >>>>>>>>>> + >>>>>>>>>> + clocks: >>>>>>>>>> + maxItems: 1 >>>>>>>>>> + >>>>>>>>>> + clock-names: >>>>>>>>>> + items: >>>>>>>>>> + - const: xtal >>>>>>>>>> + >>>>>>>>>> + "#clock-cells": >>>>>>>>>> + const: 1 >>>>>>>>>> + >>>>>>>>>> +required: >>>>>>>>>> + - compatible >>>>>>>>>> + - reg >>>>>>>>>> + - clocks >>>>>>>>>> + - clock-names >>>>>>>>>> + - "#clock-cells" >>>>>>>>>> + >>>>>>>>>> +additionalProperties: false >>>>>>>>>> + >>>>>>>>>> +examples: >>>>>>>>>> + - | >>>>>>>>>> + clkc_pll: clock-controller@fe008000 { >>>>>>>>>> + compatible = "amlogic,s4-pll-clkc"; >>>>>>>>>> + reg = <0xfe008000 0x1e8>; >>>>>>>>>> + clocks = <&xtal>; >>>>>>>>>> + clock-names = "xtal"; >>>>>>>>>> + #clock-cells = <1>; >>>>>>>>>> + }; >>>>>>>>> >>>>>>>>> >>>>>>>>>> +#endif /* __MESON_S4_PLL_H__ */ >>>>>>>>>> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>>>>> b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>>>>> new file mode 100644 >>>>>>>>>> index 000000000000..345f87023886 >>>>>>>>>> --- /dev/null >>>>>>>>>> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>>>> >>>>>>>>> This belongs to bindings patch, not driver. >>>>>>>>> >>>>>>>>>> @@ -0,0 +1,30 @@ >>>>>>>>>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >>>>>>>>>> +/* >>>>>>>>>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >>>>>>>>>> + * Author: Yu Tu <yu.tu@amlogic.com> >>>>>>>>>> + */ >>>>>>>>>> + >>>>>>>>>> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>>>>>>> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>>>>>>> + >>>>>>>>>> +/* >>>>>>>>>> + * CLKID index values >>>>>>>>>> + */ >>>>>>>>>> + >>>>>>>>>> +#define CLKID_FIXED_PLL 1 >>>>>>>>>> +#define CLKID_FCLK_DIV2 3 >>>>>>>>> >>>>>>>>> Indexes start from 0 and are incremented by 1. Not by 2. >>>>>>>>> >>>>>>>>> NAK. >>>>>>>> >>>>>>>> I remember Jerome discussing this with you.You can look at this >>>>>>>> submission history. >>>>>>>> https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ >>>>>>> >>>>>>> Historically we did that by only exposing part of the numbers, >>>>>>> controlling which >>>>>>> clocks were part of the bindings. >>>>>>> >>>>>>> But it seems this doesn't make sens anymore, maybe it would be >>>>>>> time to put all the >>>>>>> clock ids in the bindings for this new SoC and break with the >>>>>>> previous strategy. >>>>> Krzysztof and I agreed there is nothing wrong with the current >>>>> approach, I believe. >>>>> It does not prevent someone from using an un-exposed clock, sure, or >>>>> exposing it in the future if necessary. >>>>> However, I think it clearly shows that an un-exposed element is not >>>>> expected to be used by an external consumers. It should be enough to >>>>> trigger a discussion if this expectation is wrong. >>>>> >>>>>> >>>>>> So the outcome of the previous discussion was somewhere later in that >>>>>> thread: >>>>>> >>>>>>> It is just a choice to not expose some IDs. >>>>>>> It is not tied to the implementation at all. >>>>>>> I think we actually follow the rules and the idea behind it. >>>>>> >>>>>> >>>>>> Best regards, >>>>>> Krzysztof >>>>> . >>> >>> . > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings @ 2022-12-01 11:33 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-12-01 11:33 UTC (permalink / raw) To: neil.armstrong, Jerome Brunet, Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 2022/12/1 16:36, neil.armstrong@linaro.org wrote: > [ EXTERNAL EMAIL ] > > On 28/11/2022 14:30, Yu Tu wrote: >> Hi Jerome , >> >> On 2022/11/28 20:33, Jerome Brunet wrote: >>> [ EXTERNAL EMAIL ] >>> >>> >>> On Mon 28 Nov 2022 at 15:39, Yu Tu <yu.tu@amlogic.com> wrote: >>> >>>> Hi Jerome, >>>> Thank you for your reply. >>>> >>>> On 2022/11/25 17:23, Jerome Brunet wrote: >>>>> [ EXTERNAL EMAIL ] >>>>> On Wed 23 Nov 2022 at 14:53, Krzysztof Kozlowski >>>>> <krzysztof.kozlowski@linaro.org> wrote: >>>>> >>>>>> On 23/11/2022 14:23, Neil Armstrong wrote: >>>>>>> Hi, >>>>>>> >>>>>>> On 23/11/2022 12:16, Yu Tu wrote: >>>>>>>> Hi Krzysztof, >>>>>>>> Thank you for your reply. >>>>>>>> >>>>>>>> On 2022/11/23 18:08, Krzysztof Kozlowski wrote: >>>>>>>>> [ EXTERNAL EMAIL ] >>>>>>>>> >>>>>>>>> On 23/11/2022 03:13, Yu Tu wrote: >>>>>>>>>> Add the S4 PLL clock controller found and bindings in the s4 >>>>>>>>>> SoC family. >>>>>>>>>> >>>>>>>>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>>>>>>>> --- >>>>>>>>>> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + >>>>>>>>> >>>>>>>>> This is v5 and still bindings are here? Bindings are always >>>>>>>>> separate >>>>>>>>> patches. Use subject prefixes matching the subsystem (git log >>>>>>>>> --oneline >>>>>>>>> -- ...). >>>>>>>>> >>>>>>>>> And this was split, wasn't it? What happened here?!? >>>>>>>> >>>>>>>> Put bindings and clock driver patch together from Jerome. Maybe >>>>>>>> you can read this chat history. >>>>>>>> https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ >>>>>>> >>>>>>> Jerome was asking you to send 2 patchsets, one with : >>>>>>> - bindings in separate patches >>>>>>> - drivers in separate patches >>>>>>> and a second with DT changes. >>>>> Indeed, this is what was asked. It is aligned with Krzysztof's >>>>> request. >>>> >>>> According to your discussion, I still should send patches in the >>>> previous >>>> way in series. But I'm going to change it like you suggested. >>>> I don't know, am I getting it right? >>> >>> 3 people tried to explain this already and we all told you the same >>> thing. >>> >>> * 1 patchset per maintainer: clk and dt >>> * bindings must be dedicated patches - never mixed with driver code. >>> >>> I strongly suggest that you take some time to (re)read: >>> * https://docs.kernel.org/process/submitting-patches.html >>> * https://docs.kernel.org/devicetree/bindings/submitting-patches.html >>> >>> If still unclear, please take some time to look at the kernel mailing >>> list archive and see how others have done the same things. >>> >>> Thx. >> >> I'll change it as you suggest.But I still don't understand what you >> suggested in V3. >> >> I remember discussing it with you at V3. >> https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ >> >> ">>>> Also it would be nice to split this in two series. >> >>>> Bindings and drivers in one, arm64 dt in the other. These >> changes goes >> >>>> in through different trees. >> >>> At present, Bindings, DTS and drivers are three series. Do you >> mean to put >> >>> Bindings and drivers together? If so, checkpatch.pl will report a >> warning. >> >> Yes because patches are not in yet so there is a good reason to >> ignore >> >> the warning. Warning will never show up on the actual tree if the >> >> patches are correctly ordered. >> > >> > I think Binding, DTS and drivers use three series and you said two >> series >> > is not a big problem. Three series are recommended for >> checkpatch.pl, I >> > think it should be easy for that to separate and merge。 >> >> No - There is only 2 series. 1 for the bindings and clock drivers and >> one for the DT once things are in" > > Please send the following emails: > > * First patchset > > [PATCH V6 0/3] clk: meson: Add S4 SoC PLL and Peripheral clock controller > [PATCH v6 1/3] dt-bindings: clock: document Amlogic S4 SoC PLL & > peripheral clock controller > [PATCH v6 2/3] clk: meson: add support for Amlogic S4 SoC PLL > [PATCH v6 3/3] clk: meson: add support for Amlogic S4 SoC > peripheral clock controller > > 1) will contain only .yaml and dt-bindings include > 2) will only have drivers/clk/meson changes > 3) will only have drivers/clk/meson changes > > * Second patchset: > > [PATCH v1 0/2] arm64: dts: meson: Add S4 SoC PLL and Peripheral clock nodes > [PATCH v1 1/2] arm64: dts: meson: add S4 Soc PLL clock controller node > [PATCH v1 2/2] arm64: dts: meson: add S4 Soc Peripheral clock > controller node > > 1) is the patch 3 of v5 patchset > 2) is the patch 4 of v5 patchset > > And in the second cover letter, explain those patches comes from the > previous V5 patchset > and add a link to the V6 "drivers + bindings" patchset as a dependency. > > Neil Hi Neil, Thank you very much for your detailed explanation. >> >>> >>>> >>>>> >>>>>>> >>>>>>> Then when the bindings + clocks patches are merged, a pull >>>>>>> request of the bindings >>>>>>> can be done to me so I can merge it with DT. >>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>> MAINTAINERS | 1 + >>>>>>>>>> drivers/clk/meson/Kconfig | 13 + >>>>>>>>>> drivers/clk/meson/Makefile | 1 + >>>>>>>>>> drivers/clk/meson/s4-pll.c | 875 >>>>>>>>>> ++++++++++++++++++ >>>>>>>>>> drivers/clk/meson/s4-pll.h | 88 ++ >>>>>>>>>> .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + >>>>>>>>>> 7 files changed, 1059 insertions(+) >>>>>>>>>> create mode 100644 >>>>>>>>>> Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>>>>> create mode 100644 drivers/clk/meson/s4-pll.c >>>>>>>>>> create mode 100644 drivers/clk/meson/s4-pll.h >>>>>>>>>> create mode 100644 >>>>>>>>>> include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>>>>> >>>>>>>>>> diff --git >>>>>>>>>> a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>>>>> new file mode 100644 >>>>>>>>>> index 000000000000..fd517e8ef14f >>>>>>>>>> --- /dev/null >>>>>>>>>> +++ >>>>>>>>>> b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>>>>>>> @@ -0,0 +1,51 @@ >>>>>>>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>>>>>>>>> +%YAML 1.2 >>>>>>>>>> +--- >>>>>>>>>> +$id: >>>>>>>>>> http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# >>>>>>>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>>>>>>>>> + >>>>>>>>>> +title: Amlogic Meson S serials PLL Clock Controller >>>>>>>>>> + >>>>>>>>>> +maintainers: >>>>>>>>>> + - Neil Armstrong <narmstrong@baylibre.com> >>>>>>>>>> + - Jerome Brunet <jbrunet@baylibre.com> >>>>>>>>>> + - Yu Tu <yu.hu@amlogic.com> >>>>>>>>>> + >>>>>>>>> One blank line. >>>>>>>> >>>>>>>> I will delete this, on next version patch. >>>>>>>> >>>>>>>>> >>>>>>>>>> + >>>>>>>>>> +properties: >>>>>>>>>> + compatible: >>>>>>>>>> + const: amlogic,s4-pll-clkc >>>>>>>>>> + >>>>>>>>>> + reg: >>>>>>>>>> + maxItems: 1 >>>>>>>>>> + >>>>>>>>>> + clocks: >>>>>>>>>> + maxItems: 1 >>>>>>>>>> + >>>>>>>>>> + clock-names: >>>>>>>>>> + items: >>>>>>>>>> + - const: xtal >>>>>>>>>> + >>>>>>>>>> + "#clock-cells": >>>>>>>>>> + const: 1 >>>>>>>>>> + >>>>>>>>>> +required: >>>>>>>>>> + - compatible >>>>>>>>>> + - reg >>>>>>>>>> + - clocks >>>>>>>>>> + - clock-names >>>>>>>>>> + - "#clock-cells" >>>>>>>>>> + >>>>>>>>>> +additionalProperties: false >>>>>>>>>> + >>>>>>>>>> +examples: >>>>>>>>>> + - | >>>>>>>>>> + clkc_pll: clock-controller@fe008000 { >>>>>>>>>> + compatible = "amlogic,s4-pll-clkc"; >>>>>>>>>> + reg = <0xfe008000 0x1e8>; >>>>>>>>>> + clocks = <&xtal>; >>>>>>>>>> + clock-names = "xtal"; >>>>>>>>>> + #clock-cells = <1>; >>>>>>>>>> + }; >>>>>>>>> >>>>>>>>> >>>>>>>>>> +#endif /* __MESON_S4_PLL_H__ */ >>>>>>>>>> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>>>>> b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>>>>> new file mode 100644 >>>>>>>>>> index 000000000000..345f87023886 >>>>>>>>>> --- /dev/null >>>>>>>>>> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>>>>>> >>>>>>>>> This belongs to bindings patch, not driver. >>>>>>>>> >>>>>>>>>> @@ -0,0 +1,30 @@ >>>>>>>>>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >>>>>>>>>> +/* >>>>>>>>>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >>>>>>>>>> + * Author: Yu Tu <yu.tu@amlogic.com> >>>>>>>>>> + */ >>>>>>>>>> + >>>>>>>>>> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>>>>>>> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>>>>>>> + >>>>>>>>>> +/* >>>>>>>>>> + * CLKID index values >>>>>>>>>> + */ >>>>>>>>>> + >>>>>>>>>> +#define CLKID_FIXED_PLL 1 >>>>>>>>>> +#define CLKID_FCLK_DIV2 3 >>>>>>>>> >>>>>>>>> Indexes start from 0 and are incremented by 1. Not by 2. >>>>>>>>> >>>>>>>>> NAK. >>>>>>>> >>>>>>>> I remember Jerome discussing this with you.You can look at this >>>>>>>> submission history. >>>>>>>> https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ >>>>>>> >>>>>>> Historically we did that by only exposing part of the numbers, >>>>>>> controlling which >>>>>>> clocks were part of the bindings. >>>>>>> >>>>>>> But it seems this doesn't make sens anymore, maybe it would be >>>>>>> time to put all the >>>>>>> clock ids in the bindings for this new SoC and break with the >>>>>>> previous strategy. >>>>> Krzysztof and I agreed there is nothing wrong with the current >>>>> approach, I believe. >>>>> It does not prevent someone from using an un-exposed clock, sure, or >>>>> exposing it in the future if necessary. >>>>> However, I think it clearly shows that an un-exposed element is not >>>>> expected to be used by an external consumers. It should be enough to >>>>> trigger a discussion if this expectation is wrong. >>>>> >>>>>> >>>>>> So the outcome of the previous discussion was somewhere later in that >>>>>> thread: >>>>>> >>>>>>> It is just a choice to not expose some IDs. >>>>>>> It is not tied to the implementation at all. >>>>>>> I think we actually follow the rules and the idea behind it. >>>>>> >>>>>> >>>>>> Best regards, >>>>>> Krzysztof >>>>> . >>> >>> . > ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings 2022-11-23 13:23 ` Neil Armstrong (?) @ 2022-11-23 13:54 ` Yu Tu -1 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 13:54 UTC (permalink / raw) To: neil.armstrong, Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang Hi Neil, On 2022/11/23 21:23, Neil Armstrong wrote: > [ EXTERNAL EMAIL ] > > Hi, > > On 23/11/2022 12:16, Yu Tu wrote: >> Hi Krzysztof, >> Thank you for your reply. >> >> On 2022/11/23 18:08, Krzysztof Kozlowski wrote: >>> [ EXTERNAL EMAIL ] >>> >>> On 23/11/2022 03:13, Yu Tu wrote: >>>> Add the S4 PLL clock controller found and bindings in the s4 SoC >>>> family. >>>> >>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>> --- >>>> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + >>> >>> This is v5 and still bindings are here? Bindings are always separate >>> patches. Use subject prefixes matching the subsystem (git log --oneline >>> -- ...). >>> >>> And this was split, wasn't it? What happened here?!? >> >> Put bindings and clock driver patch together from Jerome. Maybe you >> can read this chat history. >> https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ > > Jerome was asking you to send 2 patchsets, one with : > - bindings in separate patches > - drivers in separate patches > and a second with DT changes. > > Then when the bindings + clocks patches are merged, a pull request of > the bindings > can be done to me so I can merge it with DT. > I may have misunderstood Jerome's advice.So should I follow the V4 patch format and change as Jerome suggested from V3? >> >>> >>> >>>> MAINTAINERS | 1 + >>>> drivers/clk/meson/Kconfig | 13 + >>>> drivers/clk/meson/Makefile | 1 + >>>> drivers/clk/meson/s4-pll.c | 875 >>>> ++++++++++++++++++ >>>> drivers/clk/meson/s4-pll.h | 88 ++ >>>> .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + >>>> 7 files changed, 1059 insertions(+) >>>> create mode 100644 >>>> Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>> create mode 100644 drivers/clk/meson/s4-pll.c >>>> create mode 100644 drivers/clk/meson/s4-pll.h >>>> create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>> >>>> diff --git >>>> a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>> b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>> new file mode 100644 >>>> index 000000000000..fd517e8ef14f >>>> --- /dev/null >>>> +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>> @@ -0,0 +1,51 @@ >>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>>> +%YAML 1.2 >>>> +--- >>>> +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# >>>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>>> + >>>> +title: Amlogic Meson S serials PLL Clock Controller >>>> + >>>> +maintainers: >>>> + - Neil Armstrong <narmstrong@baylibre.com> >>>> + - Jerome Brunet <jbrunet@baylibre.com> >>>> + - Yu Tu <yu.hu@amlogic.com> >>>> + >>> One blank line. >> >> I will delete this, on next version patch. >> >>> >>>> + >>>> +properties: >>>> + compatible: >>>> + const: amlogic,s4-pll-clkc >>>> + >>>> + reg: >>>> + maxItems: 1 >>>> + >>>> + clocks: >>>> + maxItems: 1 >>>> + >>>> + clock-names: >>>> + items: >>>> + - const: xtal >>>> + >>>> + "#clock-cells": >>>> + const: 1 >>>> + >>>> +required: >>>> + - compatible >>>> + - reg >>>> + - clocks >>>> + - clock-names >>>> + - "#clock-cells" >>>> + >>>> +additionalProperties: false >>>> + >>>> +examples: >>>> + - | >>>> + clkc_pll: clock-controller@fe008000 { >>>> + compatible = "amlogic,s4-pll-clkc"; >>>> + reg = <0xfe008000 0x1e8>; >>>> + clocks = <&xtal>; >>>> + clock-names = "xtal"; >>>> + #clock-cells = <1>; >>>> + }; >>> >>> >>>> +#endif /* __MESON_S4_PLL_H__ */ >>>> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>> b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>> new file mode 100644 >>>> index 000000000000..345f87023886 >>>> --- /dev/null >>>> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>> >>> This belongs to bindings patch, not driver. >>> >>>> @@ -0,0 +1,30 @@ >>>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >>>> +/* >>>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >>>> + * Author: Yu Tu <yu.tu@amlogic.com> >>>> + */ >>>> + >>>> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>> + >>>> +/* >>>> + * CLKID index values >>>> + */ >>>> + >>>> +#define CLKID_FIXED_PLL 1 >>>> +#define CLKID_FCLK_DIV2 3 >>> >>> Indexes start from 0 and are incremented by 1. Not by 2. >>> >>> NAK. >> >> I remember Jerome discussing this with you.You can look at this >> submission history. >> https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ >> > > Historically we did that by only exposing part of the numbers, > controlling which > clocks were part of the bindings. > > But it seems this doesn't make sens anymore, maybe it would be time to > put all the > clock ids in the bindings for this new SoC and break with the previous > strategy. That's OK with me. But I don't know if Jerome thinks it's ok? > > Neil > >> >>> >>> Best regards, >>> Krzysztof >>> >>> . > > . _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings @ 2022-11-23 13:54 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 13:54 UTC (permalink / raw) To: neil.armstrong, Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang Hi Neil, On 2022/11/23 21:23, Neil Armstrong wrote: > [ EXTERNAL EMAIL ] > > Hi, > > On 23/11/2022 12:16, Yu Tu wrote: >> Hi Krzysztof, >> Thank you for your reply. >> >> On 2022/11/23 18:08, Krzysztof Kozlowski wrote: >>> [ EXTERNAL EMAIL ] >>> >>> On 23/11/2022 03:13, Yu Tu wrote: >>>> Add the S4 PLL clock controller found and bindings in the s4 SoC >>>> family. >>>> >>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>> --- >>>> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + >>> >>> This is v5 and still bindings are here? Bindings are always separate >>> patches. Use subject prefixes matching the subsystem (git log --oneline >>> -- ...). >>> >>> And this was split, wasn't it? What happened here?!? >> >> Put bindings and clock driver patch together from Jerome. Maybe you >> can read this chat history. >> https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ > > Jerome was asking you to send 2 patchsets, one with : > - bindings in separate patches > - drivers in separate patches > and a second with DT changes. > > Then when the bindings + clocks patches are merged, a pull request of > the bindings > can be done to me so I can merge it with DT. > I may have misunderstood Jerome's advice.So should I follow the V4 patch format and change as Jerome suggested from V3? >> >>> >>> >>>> MAINTAINERS | 1 + >>>> drivers/clk/meson/Kconfig | 13 + >>>> drivers/clk/meson/Makefile | 1 + >>>> drivers/clk/meson/s4-pll.c | 875 >>>> ++++++++++++++++++ >>>> drivers/clk/meson/s4-pll.h | 88 ++ >>>> .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + >>>> 7 files changed, 1059 insertions(+) >>>> create mode 100644 >>>> Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>> create mode 100644 drivers/clk/meson/s4-pll.c >>>> create mode 100644 drivers/clk/meson/s4-pll.h >>>> create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>> >>>> diff --git >>>> a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>> b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>> new file mode 100644 >>>> index 000000000000..fd517e8ef14f >>>> --- /dev/null >>>> +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>> @@ -0,0 +1,51 @@ >>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>>> +%YAML 1.2 >>>> +--- >>>> +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# >>>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>>> + >>>> +title: Amlogic Meson S serials PLL Clock Controller >>>> + >>>> +maintainers: >>>> + - Neil Armstrong <narmstrong@baylibre.com> >>>> + - Jerome Brunet <jbrunet@baylibre.com> >>>> + - Yu Tu <yu.hu@amlogic.com> >>>> + >>> One blank line. >> >> I will delete this, on next version patch. >> >>> >>>> + >>>> +properties: >>>> + compatible: >>>> + const: amlogic,s4-pll-clkc >>>> + >>>> + reg: >>>> + maxItems: 1 >>>> + >>>> + clocks: >>>> + maxItems: 1 >>>> + >>>> + clock-names: >>>> + items: >>>> + - const: xtal >>>> + >>>> + "#clock-cells": >>>> + const: 1 >>>> + >>>> +required: >>>> + - compatible >>>> + - reg >>>> + - clocks >>>> + - clock-names >>>> + - "#clock-cells" >>>> + >>>> +additionalProperties: false >>>> + >>>> +examples: >>>> + - | >>>> + clkc_pll: clock-controller@fe008000 { >>>> + compatible = "amlogic,s4-pll-clkc"; >>>> + reg = <0xfe008000 0x1e8>; >>>> + clocks = <&xtal>; >>>> + clock-names = "xtal"; >>>> + #clock-cells = <1>; >>>> + }; >>> >>> >>>> +#endif /* __MESON_S4_PLL_H__ */ >>>> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>> b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>> new file mode 100644 >>>> index 000000000000..345f87023886 >>>> --- /dev/null >>>> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>> >>> This belongs to bindings patch, not driver. >>> >>>> @@ -0,0 +1,30 @@ >>>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >>>> +/* >>>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >>>> + * Author: Yu Tu <yu.tu@amlogic.com> >>>> + */ >>>> + >>>> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>> + >>>> +/* >>>> + * CLKID index values >>>> + */ >>>> + >>>> +#define CLKID_FIXED_PLL 1 >>>> +#define CLKID_FCLK_DIV2 3 >>> >>> Indexes start from 0 and are incremented by 1. Not by 2. >>> >>> NAK. >> >> I remember Jerome discussing this with you.You can look at this >> submission history. >> https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ >> > > Historically we did that by only exposing part of the numbers, > controlling which > clocks were part of the bindings. > > But it seems this doesn't make sens anymore, maybe it would be time to > put all the > clock ids in the bindings for this new SoC and break with the previous > strategy. That's OK with me. But I don't know if Jerome thinks it's ok? > > Neil > >> >>> >>> Best regards, >>> Krzysztof >>> >>> . > > . ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings @ 2022-11-23 13:54 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 13:54 UTC (permalink / raw) To: neil.armstrong, Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang Hi Neil, On 2022/11/23 21:23, Neil Armstrong wrote: > [ EXTERNAL EMAIL ] > > Hi, > > On 23/11/2022 12:16, Yu Tu wrote: >> Hi Krzysztof, >> Thank you for your reply. >> >> On 2022/11/23 18:08, Krzysztof Kozlowski wrote: >>> [ EXTERNAL EMAIL ] >>> >>> On 23/11/2022 03:13, Yu Tu wrote: >>>> Add the S4 PLL clock controller found and bindings in the s4 SoC >>>> family. >>>> >>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>> --- >>>> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + >>> >>> This is v5 and still bindings are here? Bindings are always separate >>> patches. Use subject prefixes matching the subsystem (git log --oneline >>> -- ...). >>> >>> And this was split, wasn't it? What happened here?!? >> >> Put bindings and clock driver patch together from Jerome. Maybe you >> can read this chat history. >> https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ > > Jerome was asking you to send 2 patchsets, one with : > - bindings in separate patches > - drivers in separate patches > and a second with DT changes. > > Then when the bindings + clocks patches are merged, a pull request of > the bindings > can be done to me so I can merge it with DT. > I may have misunderstood Jerome's advice.So should I follow the V4 patch format and change as Jerome suggested from V3? >> >>> >>> >>>> MAINTAINERS | 1 + >>>> drivers/clk/meson/Kconfig | 13 + >>>> drivers/clk/meson/Makefile | 1 + >>>> drivers/clk/meson/s4-pll.c | 875 >>>> ++++++++++++++++++ >>>> drivers/clk/meson/s4-pll.h | 88 ++ >>>> .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + >>>> 7 files changed, 1059 insertions(+) >>>> create mode 100644 >>>> Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>> create mode 100644 drivers/clk/meson/s4-pll.c >>>> create mode 100644 drivers/clk/meson/s4-pll.h >>>> create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>> >>>> diff --git >>>> a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>> b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>> new file mode 100644 >>>> index 000000000000..fd517e8ef14f >>>> --- /dev/null >>>> +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>> @@ -0,0 +1,51 @@ >>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>>> +%YAML 1.2 >>>> +--- >>>> +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# >>>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>>> + >>>> +title: Amlogic Meson S serials PLL Clock Controller >>>> + >>>> +maintainers: >>>> + - Neil Armstrong <narmstrong@baylibre.com> >>>> + - Jerome Brunet <jbrunet@baylibre.com> >>>> + - Yu Tu <yu.hu@amlogic.com> >>>> + >>> One blank line. >> >> I will delete this, on next version patch. >> >>> >>>> + >>>> +properties: >>>> + compatible: >>>> + const: amlogic,s4-pll-clkc >>>> + >>>> + reg: >>>> + maxItems: 1 >>>> + >>>> + clocks: >>>> + maxItems: 1 >>>> + >>>> + clock-names: >>>> + items: >>>> + - const: xtal >>>> + >>>> + "#clock-cells": >>>> + const: 1 >>>> + >>>> +required: >>>> + - compatible >>>> + - reg >>>> + - clocks >>>> + - clock-names >>>> + - "#clock-cells" >>>> + >>>> +additionalProperties: false >>>> + >>>> +examples: >>>> + - | >>>> + clkc_pll: clock-controller@fe008000 { >>>> + compatible = "amlogic,s4-pll-clkc"; >>>> + reg = <0xfe008000 0x1e8>; >>>> + clocks = <&xtal>; >>>> + clock-names = "xtal"; >>>> + #clock-cells = <1>; >>>> + }; >>> >>> >>>> +#endif /* __MESON_S4_PLL_H__ */ >>>> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>> b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>> new file mode 100644 >>>> index 000000000000..345f87023886 >>>> --- /dev/null >>>> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>> >>> This belongs to bindings patch, not driver. >>> >>>> @@ -0,0 +1,30 @@ >>>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >>>> +/* >>>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >>>> + * Author: Yu Tu <yu.tu@amlogic.com> >>>> + */ >>>> + >>>> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>> + >>>> +/* >>>> + * CLKID index values >>>> + */ >>>> + >>>> +#define CLKID_FIXED_PLL 1 >>>> +#define CLKID_FCLK_DIV2 3 >>> >>> Indexes start from 0 and are incremented by 1. Not by 2. >>> >>> NAK. >> >> I remember Jerome discussing this with you.You can look at this >> submission history. >> https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ >> > > Historically we did that by only exposing part of the numbers, > controlling which > clocks were part of the bindings. > > But it seems this doesn't make sens anymore, maybe it would be time to > put all the > clock ids in the bindings for this new SoC and break with the previous > strategy. That's OK with me. But I don't know if Jerome thinks it's ok? > > Neil > >> >>> >>> Best regards, >>> Krzysztof >>> >>> . > > . _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings 2022-11-23 13:54 ` Yu Tu (?) @ 2022-11-23 13:57 ` neil.armstrong -1 siblings, 0 replies; 109+ messages in thread From: neil.armstrong @ 2022-11-23 13:57 UTC (permalink / raw) To: Yu Tu, Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 14:54, Yu Tu wrote: > Hi Neil, > > On 2022/11/23 21:23, Neil Armstrong wrote: >> [ EXTERNAL EMAIL ] >> >> Hi, >> >> On 23/11/2022 12:16, Yu Tu wrote: >>> Hi Krzysztof, >>> Thank you for your reply. >>> >>> On 2022/11/23 18:08, Krzysztof Kozlowski wrote: >>>> [ EXTERNAL EMAIL ] >>>> >>>> On 23/11/2022 03:13, Yu Tu wrote: >>>>> Add the S4 PLL clock controller found and bindings in the s4 SoC family. >>>>> >>>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>>> --- >>>>> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + >>>> >>>> This is v5 and still bindings are here? Bindings are always separate >>>> patches. Use subject prefixes matching the subsystem (git log --oneline >>>> -- ...). >>>> >>>> And this was split, wasn't it? What happened here?!? >>> >>> Put bindings and clock driver patch together from Jerome. Maybe you can read this chat history. >>> https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ >> >> Jerome was asking you to send 2 patchsets, one with : >> - bindings in separate patches >> - drivers in separate patches >> and a second with DT changes. >> >> Then when the bindings + clocks patches are merged, a pull request of the bindings >> can be done to me so I can merge it with DT. >> > > I may have misunderstood Jerome's advice.So should I follow the V4 patch format and change as Jerome suggested from V3? Let's wait for his input on this to see if a v4 is needed now or later. > >>> >>>> >>>> >>>>> MAINTAINERS | 1 + >>>>> drivers/clk/meson/Kconfig | 13 + >>>>> drivers/clk/meson/Makefile | 1 + >>>>> drivers/clk/meson/s4-pll.c | 875 ++++++++++++++++++ >>>>> drivers/clk/meson/s4-pll.h | 88 ++ >>>>> .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + >>>>> 7 files changed, 1059 insertions(+) >>>>> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>> create mode 100644 drivers/clk/meson/s4-pll.c >>>>> create mode 100644 drivers/clk/meson/s4-pll.h >>>>> create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>> >>>>> diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>> new file mode 100644 >>>>> index 000000000000..fd517e8ef14f >>>>> --- /dev/null >>>>> +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>> @@ -0,0 +1,51 @@ >>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>>>> +%YAML 1.2 >>>>> +--- >>>>> +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# >>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>>>> + >>>>> +title: Amlogic Meson S serials PLL Clock Controller >>>>> + >>>>> +maintainers: >>>>> + - Neil Armstrong <narmstrong@baylibre.com> >>>>> + - Jerome Brunet <jbrunet@baylibre.com> >>>>> + - Yu Tu <yu.hu@amlogic.com> >>>>> + >>>> One blank line. >>> >>> I will delete this, on next version patch. >>> >>>> >>>>> + >>>>> +properties: >>>>> + compatible: >>>>> + const: amlogic,s4-pll-clkc >>>>> + >>>>> + reg: >>>>> + maxItems: 1 >>>>> + >>>>> + clocks: >>>>> + maxItems: 1 >>>>> + >>>>> + clock-names: >>>>> + items: >>>>> + - const: xtal >>>>> + >>>>> + "#clock-cells": >>>>> + const: 1 >>>>> + >>>>> +required: >>>>> + - compatible >>>>> + - reg >>>>> + - clocks >>>>> + - clock-names >>>>> + - "#clock-cells" >>>>> + >>>>> +additionalProperties: false >>>>> + >>>>> +examples: >>>>> + - | >>>>> + clkc_pll: clock-controller@fe008000 { >>>>> + compatible = "amlogic,s4-pll-clkc"; >>>>> + reg = <0xfe008000 0x1e8>; >>>>> + clocks = <&xtal>; >>>>> + clock-names = "xtal"; >>>>> + #clock-cells = <1>; >>>>> + }; >>>> >>>> >>>>> +#endif /* __MESON_S4_PLL_H__ */ >>>>> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>> new file mode 100644 >>>>> index 000000000000..345f87023886 >>>>> --- /dev/null >>>>> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>> >>>> This belongs to bindings patch, not driver. >>>> >>>>> @@ -0,0 +1,30 @@ >>>>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >>>>> +/* >>>>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >>>>> + * Author: Yu Tu <yu.tu@amlogic.com> >>>>> + */ >>>>> + >>>>> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>> + >>>>> +/* >>>>> + * CLKID index values >>>>> + */ >>>>> + >>>>> +#define CLKID_FIXED_PLL 1 >>>>> +#define CLKID_FCLK_DIV2 3 >>>> >>>> Indexes start from 0 and are incremented by 1. Not by 2. >>>> >>>> NAK. >>> >>> I remember Jerome discussing this with you.You can look at this submission history. >>> https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ >> >> Historically we did that by only exposing part of the numbers, controlling which >> clocks were part of the bindings. >> >> But it seems this doesn't make sens anymore, maybe it would be time to put all the >> clock ids in the bindings for this new SoC and break with the previous strategy. > > That's OK with me. But I don't know if Jerome thinks it's ok? Let's wait for his input on that aswell. Neil > >> >> Neil >> >>> >>>> >>>> Best regards, >>>> Krzysztof >>>> >>>> . >> >> . _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings @ 2022-11-23 13:57 ` neil.armstrong 0 siblings, 0 replies; 109+ messages in thread From: neil.armstrong @ 2022-11-23 13:57 UTC (permalink / raw) To: Yu Tu, Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 14:54, Yu Tu wrote: > Hi Neil, > > On 2022/11/23 21:23, Neil Armstrong wrote: >> [ EXTERNAL EMAIL ] >> >> Hi, >> >> On 23/11/2022 12:16, Yu Tu wrote: >>> Hi Krzysztof, >>> Thank you for your reply. >>> >>> On 2022/11/23 18:08, Krzysztof Kozlowski wrote: >>>> [ EXTERNAL EMAIL ] >>>> >>>> On 23/11/2022 03:13, Yu Tu wrote: >>>>> Add the S4 PLL clock controller found and bindings in the s4 SoC family. >>>>> >>>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>>> --- >>>>> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + >>>> >>>> This is v5 and still bindings are here? Bindings are always separate >>>> patches. Use subject prefixes matching the subsystem (git log --oneline >>>> -- ...). >>>> >>>> And this was split, wasn't it? What happened here?!? >>> >>> Put bindings and clock driver patch together from Jerome. Maybe you can read this chat history. >>> https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ >> >> Jerome was asking you to send 2 patchsets, one with : >> - bindings in separate patches >> - drivers in separate patches >> and a second with DT changes. >> >> Then when the bindings + clocks patches are merged, a pull request of the bindings >> can be done to me so I can merge it with DT. >> > > I may have misunderstood Jerome's advice.So should I follow the V4 patch format and change as Jerome suggested from V3? Let's wait for his input on this to see if a v4 is needed now or later. > >>> >>>> >>>> >>>>> MAINTAINERS | 1 + >>>>> drivers/clk/meson/Kconfig | 13 + >>>>> drivers/clk/meson/Makefile | 1 + >>>>> drivers/clk/meson/s4-pll.c | 875 ++++++++++++++++++ >>>>> drivers/clk/meson/s4-pll.h | 88 ++ >>>>> .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + >>>>> 7 files changed, 1059 insertions(+) >>>>> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>> create mode 100644 drivers/clk/meson/s4-pll.c >>>>> create mode 100644 drivers/clk/meson/s4-pll.h >>>>> create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>> >>>>> diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>> new file mode 100644 >>>>> index 000000000000..fd517e8ef14f >>>>> --- /dev/null >>>>> +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>> @@ -0,0 +1,51 @@ >>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>>>> +%YAML 1.2 >>>>> +--- >>>>> +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# >>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>>>> + >>>>> +title: Amlogic Meson S serials PLL Clock Controller >>>>> + >>>>> +maintainers: >>>>> + - Neil Armstrong <narmstrong@baylibre.com> >>>>> + - Jerome Brunet <jbrunet@baylibre.com> >>>>> + - Yu Tu <yu.hu@amlogic.com> >>>>> + >>>> One blank line. >>> >>> I will delete this, on next version patch. >>> >>>> >>>>> + >>>>> +properties: >>>>> + compatible: >>>>> + const: amlogic,s4-pll-clkc >>>>> + >>>>> + reg: >>>>> + maxItems: 1 >>>>> + >>>>> + clocks: >>>>> + maxItems: 1 >>>>> + >>>>> + clock-names: >>>>> + items: >>>>> + - const: xtal >>>>> + >>>>> + "#clock-cells": >>>>> + const: 1 >>>>> + >>>>> +required: >>>>> + - compatible >>>>> + - reg >>>>> + - clocks >>>>> + - clock-names >>>>> + - "#clock-cells" >>>>> + >>>>> +additionalProperties: false >>>>> + >>>>> +examples: >>>>> + - | >>>>> + clkc_pll: clock-controller@fe008000 { >>>>> + compatible = "amlogic,s4-pll-clkc"; >>>>> + reg = <0xfe008000 0x1e8>; >>>>> + clocks = <&xtal>; >>>>> + clock-names = "xtal"; >>>>> + #clock-cells = <1>; >>>>> + }; >>>> >>>> >>>>> +#endif /* __MESON_S4_PLL_H__ */ >>>>> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>> new file mode 100644 >>>>> index 000000000000..345f87023886 >>>>> --- /dev/null >>>>> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>> >>>> This belongs to bindings patch, not driver. >>>> >>>>> @@ -0,0 +1,30 @@ >>>>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >>>>> +/* >>>>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >>>>> + * Author: Yu Tu <yu.tu@amlogic.com> >>>>> + */ >>>>> + >>>>> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>> + >>>>> +/* >>>>> + * CLKID index values >>>>> + */ >>>>> + >>>>> +#define CLKID_FIXED_PLL 1 >>>>> +#define CLKID_FCLK_DIV2 3 >>>> >>>> Indexes start from 0 and are incremented by 1. Not by 2. >>>> >>>> NAK. >>> >>> I remember Jerome discussing this with you.You can look at this submission history. >>> https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ >> >> Historically we did that by only exposing part of the numbers, controlling which >> clocks were part of the bindings. >> >> But it seems this doesn't make sens anymore, maybe it would be time to put all the >> clock ids in the bindings for this new SoC and break with the previous strategy. > > That's OK with me. But I don't know if Jerome thinks it's ok? Let's wait for his input on that aswell. Neil > >> >> Neil >> >>> >>>> >>>> Best regards, >>>> Krzysztof >>>> >>>> . >> >> . ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings @ 2022-11-23 13:57 ` neil.armstrong 0 siblings, 0 replies; 109+ messages in thread From: neil.armstrong @ 2022-11-23 13:57 UTC (permalink / raw) To: Yu Tu, Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 14:54, Yu Tu wrote: > Hi Neil, > > On 2022/11/23 21:23, Neil Armstrong wrote: >> [ EXTERNAL EMAIL ] >> >> Hi, >> >> On 23/11/2022 12:16, Yu Tu wrote: >>> Hi Krzysztof, >>> Thank you for your reply. >>> >>> On 2022/11/23 18:08, Krzysztof Kozlowski wrote: >>>> [ EXTERNAL EMAIL ] >>>> >>>> On 23/11/2022 03:13, Yu Tu wrote: >>>>> Add the S4 PLL clock controller found and bindings in the s4 SoC family. >>>>> >>>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>>> --- >>>>> .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + >>>> >>>> This is v5 and still bindings are here? Bindings are always separate >>>> patches. Use subject prefixes matching the subsystem (git log --oneline >>>> -- ...). >>>> >>>> And this was split, wasn't it? What happened here?!? >>> >>> Put bindings and clock driver patch together from Jerome. Maybe you can read this chat history. >>> https://lore.kernel.or/all/1jy1v6z14n.fsf@starbuckisacylon.baylibre.com/ >> >> Jerome was asking you to send 2 patchsets, one with : >> - bindings in separate patches >> - drivers in separate patches >> and a second with DT changes. >> >> Then when the bindings + clocks patches are merged, a pull request of the bindings >> can be done to me so I can merge it with DT. >> > > I may have misunderstood Jerome's advice.So should I follow the V4 patch format and change as Jerome suggested from V3? Let's wait for his input on this to see if a v4 is needed now or later. > >>> >>>> >>>> >>>>> MAINTAINERS | 1 + >>>>> drivers/clk/meson/Kconfig | 13 + >>>>> drivers/clk/meson/Makefile | 1 + >>>>> drivers/clk/meson/s4-pll.c | 875 ++++++++++++++++++ >>>>> drivers/clk/meson/s4-pll.h | 88 ++ >>>>> .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + >>>>> 7 files changed, 1059 insertions(+) >>>>> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>> create mode 100644 drivers/clk/meson/s4-pll.c >>>>> create mode 100644 drivers/clk/meson/s4-pll.h >>>>> create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>> >>>>> diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>> new file mode 100644 >>>>> index 000000000000..fd517e8ef14f >>>>> --- /dev/null >>>>> +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml >>>>> @@ -0,0 +1,51 @@ >>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >>>>> +%YAML 1.2 >>>>> +--- >>>>> +$id: http://devicetree.org/schemas/clock/amlogic,s4-pll-clkc.yaml# >>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml# >>>>> + >>>>> +title: Amlogic Meson S serials PLL Clock Controller >>>>> + >>>>> +maintainers: >>>>> + - Neil Armstrong <narmstrong@baylibre.com> >>>>> + - Jerome Brunet <jbrunet@baylibre.com> >>>>> + - Yu Tu <yu.hu@amlogic.com> >>>>> + >>>> One blank line. >>> >>> I will delete this, on next version patch. >>> >>>> >>>>> + >>>>> +properties: >>>>> + compatible: >>>>> + const: amlogic,s4-pll-clkc >>>>> + >>>>> + reg: >>>>> + maxItems: 1 >>>>> + >>>>> + clocks: >>>>> + maxItems: 1 >>>>> + >>>>> + clock-names: >>>>> + items: >>>>> + - const: xtal >>>>> + >>>>> + "#clock-cells": >>>>> + const: 1 >>>>> + >>>>> +required: >>>>> + - compatible >>>>> + - reg >>>>> + - clocks >>>>> + - clock-names >>>>> + - "#clock-cells" >>>>> + >>>>> +additionalProperties: false >>>>> + >>>>> +examples: >>>>> + - | >>>>> + clkc_pll: clock-controller@fe008000 { >>>>> + compatible = "amlogic,s4-pll-clkc"; >>>>> + reg = <0xfe008000 0x1e8>; >>>>> + clocks = <&xtal>; >>>>> + clock-names = "xtal"; >>>>> + #clock-cells = <1>; >>>>> + }; >>>> >>>> >>>>> +#endif /* __MESON_S4_PLL_H__ */ >>>>> diff --git a/include/dt-bindings/clock/amlogic,s4-pll-clkc.h b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>>> new file mode 100644 >>>>> index 000000000000..345f87023886 >>>>> --- /dev/null >>>>> +++ b/include/dt-bindings/clock/amlogic,s4-pll-clkc.h >>>> >>>> This belongs to bindings patch, not driver. >>>> >>>>> @@ -0,0 +1,30 @@ >>>>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >>>>> +/* >>>>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >>>>> + * Author: Yu Tu <yu.tu@amlogic.com> >>>>> + */ >>>>> + >>>>> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PLL_CLKC_H >>>>> + >>>>> +/* >>>>> + * CLKID index values >>>>> + */ >>>>> + >>>>> +#define CLKID_FIXED_PLL 1 >>>>> +#define CLKID_FCLK_DIV2 3 >>>> >>>> Indexes start from 0 and are incremented by 1. Not by 2. >>>> >>>> NAK. >>> >>> I remember Jerome discussing this with you.You can look at this submission history. >>> https://lore.kernel.org/all/c088e01c-0714-82be-8347-6140daf56640@linaro.org/ >> >> Historically we did that by only exposing part of the numbers, controlling which >> clocks were part of the bindings. >> >> But it seems this doesn't make sens anymore, maybe it would be time to put all the >> clock ids in the bindings for this new SoC and break with the previous strategy. > > That's OK with me. But I don't know if Jerome thinks it's ok? Let's wait for his input on that aswell. Neil > >> >> Neil >> >>> >>>> >>>> Best regards, >>>> Krzysztof >>>> >>>> . >> >> . _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 109+ messages in thread
* [PATCH V5 2/4] arm64: dts: meson: add S4 Soc PLL clock controller in DT 2022-11-23 2:13 ` Yu Tu (?) @ 2022-11-23 2:13 ` Yu Tu -1 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 2:13 UTC (permalink / raw) To: linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang, Yu Tu Added information about the S4 SOC PLL Clock controller in DT. Signed-off-by: Yu Tu <yu.tu@amlogic.com> --- arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi index ad50cba42d19..bd9c2ef83314 100644 --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi @@ -92,6 +92,14 @@ apb4: apb4@fe000000 { #size-cells = <2>; ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; + clkc_pll: clock-controller@8000 { + compatible = "amlogic,s4-pll-clkc"; + reg = <0x0 0x8000 0x0 0x1e8>; + clocks = <&xtal>; + clock-names = "xtal"; + #clock-cells = <1>; + }; + periphs_pinctrl: pinctrl@4000 { compatible = "amlogic,meson-s4-periphs-pinctrl"; #address-cells = <2>; -- 2.33.1 ^ permalink raw reply related [flat|nested] 109+ messages in thread
* [PATCH V5 2/4] arm64: dts: meson: add S4 Soc PLL clock controller in DT @ 2022-11-23 2:13 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 2:13 UTC (permalink / raw) To: linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang, Yu Tu Added information about the S4 SOC PLL Clock controller in DT. Signed-off-by: Yu Tu <yu.tu@amlogic.com> --- arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi index ad50cba42d19..bd9c2ef83314 100644 --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi @@ -92,6 +92,14 @@ apb4: apb4@fe000000 { #size-cells = <2>; ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; + clkc_pll: clock-controller@8000 { + compatible = "amlogic,s4-pll-clkc"; + reg = <0x0 0x8000 0x0 0x1e8>; + clocks = <&xtal>; + clock-names = "xtal"; + #clock-cells = <1>; + }; + periphs_pinctrl: pinctrl@4000 { compatible = "amlogic,meson-s4-periphs-pinctrl"; #address-cells = <2>; -- 2.33.1 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply related [flat|nested] 109+ messages in thread
* [PATCH V5 2/4] arm64: dts: meson: add S4 Soc PLL clock controller in DT @ 2022-11-23 2:13 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 2:13 UTC (permalink / raw) To: linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang, Yu Tu Added information about the S4 SOC PLL Clock controller in DT. Signed-off-by: Yu Tu <yu.tu@amlogic.com> --- arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi index ad50cba42d19..bd9c2ef83314 100644 --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi @@ -92,6 +92,14 @@ apb4: apb4@fe000000 { #size-cells = <2>; ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; + clkc_pll: clock-controller@8000 { + compatible = "amlogic,s4-pll-clkc"; + reg = <0x0 0x8000 0x0 0x1e8>; + clocks = <&xtal>; + clock-names = "xtal"; + #clock-cells = <1>; + }; + periphs_pinctrl: pinctrl@4000 { compatible = "amlogic,meson-s4-periphs-pinctrl"; #address-cells = <2>; -- 2.33.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 109+ messages in thread
* [PATCH V5 3/4] clk: meson: s4: add s4 SoC peripheral clock controller driver and bindings 2022-11-23 2:13 ` Yu Tu @ 2022-11-23 2:13 ` Yu Tu -1 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 2:13 UTC (permalink / raw) To: linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang, Yu Tu Add the peripherals clock controller found and bindings in the s4 SoC family. Signed-off-by: Yu Tu <yu.tu@amlogic.com> --- .../clock/amlogic,s4-peripherals-clkc.yaml | 105 + drivers/clk/meson/Kconfig | 12 + drivers/clk/meson/Makefile | 1 + drivers/clk/meson/s4-peripherals.c | 3783 +++++++++++++++++ drivers/clk/meson/s4-peripherals.h | 218 + .../clock/amlogic,s4-peripherals-clkc.h | 131 + 6 files changed, 4250 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml create mode 100644 drivers/clk/meson/s4-peripherals.c create mode 100644 drivers/clk/meson/s4-peripherals.h create mode 100644 include/dt-bindings/clock/amlogic,s4-peripherals-clkc.h diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml new file mode 100644 index 000000000000..d1ea05ab7ec9 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/amlogic,s4-peripherals-clkc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson S serials Peripherals Clock Controller + +maintainers: + - Neil Armstrong <narmstrong@baylibre.com> + - Jerome Brunet <jbrunet@baylibre.com> + - Yu Tu <yu.hu@amlogic.com> + + +properties: + compatible: + const: amlogic,s4-peripherals-clkc + + reg: + maxItems: 1 + + clocks: + items: + - description: input fixed pll div2 + - description: input fixed pll div2p5 + - description: input fixed pll div3 + - description: input fixed pll div4 + - description: input fixed pll div5 + - description: input fixed pll div7 + - description: input hifi pll + - description: input gp0 pll + - description: input mpll0 + - description: input mpll1 + - description: input mpll2 + - description: input mpll3 + - description: input hdmi pll + - description: input oscillator (usually at 24MHz) + - description: input external 32kHz reference (optional) + + clock-names: + items: + - const: fclk_div2 + - const: fclk_div2p5 + - const: fclk_div3 + - const: fclk_div4 + - const: fclk_div5 + - const: fclk_div7 + - const: hifi_pll + - const: gp0_pll + - const: mpll0 + - const: mpll1 + - const: mpll2 + - const: mpll3 + - const: hdmi_pll + - const: xtal + - const: ext_32k + + "#clock-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> + + /* 32KHz reference crystal */ + ext_32k: ref32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32000>; + }; + + clkc_periphs: clock-controller@fe000000 { + compatible = "amlogic,s4-peripherals-clkc"; + reg = <0xfe000000 0x49c>; + clocks = <&clkc_pll 3>, + <&clkc_pll 13>, + <&clkc_pll 5>, + <&clkc_pll 7>, + <&clkc_pll 9>, + <&clkc_pll 11>, + <&clkc_pll 17>, + <&clkc_pll 15>, + <&clkc_pll 25>, + <&clkc_pll 27>, + <&clkc_pll 29>, + <&clkc_pll 31>, + <&clkc_pll 20>, + <&xtal>, + <&ext_32k>; + clock-names = "fclk_div2", "fclk_div2p5", "fclk_div3", "fclk_div4", + "fclk_div5", "fclk_div7", "hifi_pll", "gp0_pll", + "mpll0", "mpll1", "mpll2", "mpll3", "hdmi_pll", "xtal", + "ext_32k"; + #clock-cells = <1>; + }; +... diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig index a663c90a3f3b..a6eb9fa15c74 100644 --- a/drivers/clk/meson/Kconfig +++ b/drivers/clk/meson/Kconfig @@ -128,4 +128,16 @@ config COMMON_CLK_S4_PLL aka s4. Amlogic S805X2 and S905Y4 devices include AQ222 and AQ229. Say Y if you want the board to work, because plls are the parent of most peripherals. + +config COMMON_CLK_S4 + tristate "S4 SoC Peripherals clock controllers support" + depends on ARM64 + default y + select COMMON_CLK_MESON_REGMAP + select COMMON_CLK_MESON_DUALDIV + select COMMON_CLK_MESON_VID_PLL_DIV + help + Support for the Peripherals clock controller on Amlogic S805X2 and S905Y4 + devices, aka s4. Amlogic S805X2 and S905Y4 devices include AQ222 and AQ229. + Say Y if you want peripherals to work. endmenu diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile index 376f49cc13f1..c9130afccb48 100644 --- a/drivers/clk/meson/Makefile +++ b/drivers/clk/meson/Makefile @@ -20,3 +20,4 @@ obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o obj-$(CONFIG_COMMON_CLK_S4_PLL) += s4-pll.o +obj-$(CONFIG_COMMON_CLK_S4) += s4-peripherals.o diff --git a/drivers/clk/meson/s4-peripherals.c b/drivers/clk/meson/s4-peripherals.c new file mode 100644 index 000000000000..8ce5156d3510 --- /dev/null +++ b/drivers/clk/meson/s4-peripherals.c @@ -0,0 +1,3783 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Amlogic Meson-S4 Peripherals Clock Controller Driver + * + * Copyright (c) 2021 Amlogic, inc. + * Author: Yu Tu <yu.tu@amlogic.com> + */ + +#include <linux/clk-provider.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> + +#include "clk-regmap.h" +#include "vid-pll-div.h" +#include "clk-dualdiv.h" +#include "s4-peripherals.h" + +static struct clk_regmap s4_rtc_32k_by_oscin_clkin = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_RTC_BY_OSCIN_CTRL0, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data) { + .name = "rtc_32k_by_oscin_clkin", + .ops = &clk_regmap_gate_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", } + }, + .num_parents = 1, + }, +}; + +static const struct meson_clk_dualdiv_param s4_32k_div_table[] = { + { + .dual = 1, + .n1 = 733, + .m1 = 8, + .n2 = 732, + .m2 = 11, + }, + {} +}; + +static struct clk_regmap s4_rtc_32k_by_oscin_div = { + .data = &(struct meson_clk_dualdiv_data){ + .n1 = { + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL0, + .shift = 0, + .width = 12, + }, + .n2 = { + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL0, + .shift = 12, + .width = 12, + }, + .m1 = { + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL1, + .shift = 0, + .width = 12, + }, + .m2 = { + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL1, + .shift = 12, + .width = 12, + }, + .dual = { + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL0, + .shift = 28, + .width = 1, + }, + .table = s4_32k_div_table, + }, + .hw.init = &(struct clk_init_data){ + .name = "rtc_32k_by_oscin_div", + .ops = &meson_clk_dualdiv_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_rtc_32k_by_oscin_clkin.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_rtc_32k_by_oscin_sel = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_RTC_BY_OSCIN_CTRL1, + .mask = 0x1, + .shift = 24, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "rtc_32k_by_oscin_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_rtc_32k_by_oscin_div.hw, + &s4_rtc_32k_by_oscin_clkin.hw, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_rtc_32k_by_oscin = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_RTC_BY_OSCIN_CTRL0, + .bit_idx = 30, + }, + .hw.init = &(struct clk_init_data) { + .name = "rtc_32k_by_oscin", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_rtc_32k_by_oscin_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* + * This RTC clock can be supplied by an external 32KHz crystal oscillator. + * If it is used, it should be documented in using fw_name and documented in the + * Bindings. Not currently in use on this board, so skip it. + */ +static u32 rtc_clk_sel[] = { 0, 1 }; +static const struct clk_parent_data rtc_clk_sel_parent_data[] = { + { .hw = &s4_rtc_32k_by_oscin.hw }, + { .hw = &s4_rtc_32k_by_oscin_div.hw }, + { .fw_name = "ext_32k", } +}; + +static struct clk_regmap s4_rtc_clk = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_RTC_CTRL, + .mask = 0x3, + .shift = 0, + .table = rtc_clk_sel, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "rtc_clk_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = rtc_clk_sel_parent_data, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* The index 5 is AXI_CLK, which is dedicated to AXI. So skip it. */ +static u32 mux_table_sys_ab_clk_sel[] = { 0, 1, 2, 3, 4, 6, 7 }; +static const struct clk_parent_data sys_ab_clk_parent_data[] = { + { .fw_name = "xtal" }, + { .fw_name = "fclk_div2" }, + { .fw_name = "fclk_div3" }, + { .fw_name = "fclk_div4" }, + { .fw_name = "fclk_div5" }, + { .fw_name = "fclk_div7" }, + { .hw = &s4_rtc_clk.hw } +}; + +static struct clk_regmap s4_sysclk_b_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_SYS_CLK_CTRL0, + .mask = 0x7, + .shift = 26, + .table = mux_table_sys_ab_clk_sel, + }, + .hw.init = &(struct clk_init_data){ + .name = "sysclk_b_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = sys_ab_clk_parent_data, + .num_parents = ARRAY_SIZE(sys_ab_clk_parent_data), + }, +}; + +static struct clk_regmap s4_sysclk_b_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_SYS_CLK_CTRL0, + .shift = 16, + .width = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "sysclk_b_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_sysclk_b_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_sysclk_b = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_SYS_CLK_CTRL0, + .bit_idx = 29, + }, + .hw.init = &(struct clk_init_data) { + .name = "sysclk_b", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_sysclk_b_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_sysclk_a_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_SYS_CLK_CTRL0, + .mask = 0x7, + .shift = 10, + .table = mux_table_sys_ab_clk_sel, + }, + .hw.init = &(struct clk_init_data){ + .name = "sysclk_a_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = sys_ab_clk_parent_data, + .num_parents = ARRAY_SIZE(sys_ab_clk_parent_data), + }, +}; + +static struct clk_regmap s4_sysclk_a_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_SYS_CLK_CTRL0, + .shift = 0, + .width = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "sysclk_a_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_sysclk_a_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_sysclk_a = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_SYS_CLK_CTRL0, + .bit_idx = 13, + }, + .hw.init = &(struct clk_init_data) { + .name = "sysclk_a", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_sysclk_a_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_sys_clk = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_SYS_CLK_CTRL0, + .mask = 0x1, + .shift = 31, + }, + .hw.init = &(struct clk_init_data){ + .name = "sys_clk", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_sysclk_a.hw, + &s4_sysclk_b.hw + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_ceca_32k_clkin = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_CECA_CTRL0, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data) { + .name = "ceca_32k_clkin", + .ops = &clk_regmap_gate_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", } + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_ceca_32k_div = { + .data = &(struct meson_clk_dualdiv_data){ + .n1 = { + .reg_off = CLKCTRL_CECA_CTRL0, + .shift = 0, + .width = 12, + }, + .n2 = { + .reg_off = CLKCTRL_CECA_CTRL0, + .shift = 12, + .width = 12, + }, + .m1 = { + .reg_off = CLKCTRL_CECA_CTRL1, + .shift = 0, + .width = 12, + }, + .m2 = { + .reg_off = CLKCTRL_CECA_CTRL1, + .shift = 12, + .width = 12, + }, + .dual = { + .reg_off = CLKCTRL_CECA_CTRL0, + .shift = 28, + .width = 1, + }, + .table = s4_32k_div_table, + }, + .hw.init = &(struct clk_init_data){ + .name = "ceca_32k_div", + .ops = &meson_clk_dualdiv_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_ceca_32k_clkin.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_ceca_32k_sel_pre = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_CECA_CTRL1, + .mask = 0x1, + .shift = 24, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "ceca_32k_sel_pre", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_ceca_32k_div.hw, + &s4_ceca_32k_clkin.hw + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_ceca_32k_sel = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_CECA_CTRL1, + .mask = 0x1, + .shift = 31, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "ceca_32k_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_ceca_32k_sel_pre.hw, + &s4_rtc_clk.hw + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_ceca_32k_clkout = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_CECA_CTRL0, + .bit_idx = 30, + }, + .hw.init = &(struct clk_init_data){ + .name = "ceca_32k_clkout", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_ceca_32k_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_cecb_32k_clkin = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_CECB_CTRL0, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data) { + .name = "cecb_32k_clkin", + .ops = &clk_regmap_gate_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", } + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_cecb_32k_div = { + .data = &(struct meson_clk_dualdiv_data){ + .n1 = { + .reg_off = CLKCTRL_CECB_CTRL0, + .shift = 0, + .width = 12, + }, + .n2 = { + .reg_off = CLKCTRL_CECB_CTRL0, + .shift = 12, + .width = 12, + }, + .m1 = { + .reg_off = CLKCTRL_CECB_CTRL1, + .shift = 0, + .width = 12, + }, + .m2 = { + .reg_off = CLKCTRL_CECB_CTRL1, + .shift = 12, + .width = 12, + }, + .dual = { + .reg_off = CLKCTRL_CECB_CTRL0, + .shift = 28, + .width = 1, + }, + .table = s4_32k_div_table, + }, + .hw.init = &(struct clk_init_data){ + .name = "cecb_32k_div", + .ops = &meson_clk_dualdiv_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_cecb_32k_clkin.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_cecb_32k_sel_pre = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_CECB_CTRL1, + .mask = 0x1, + .shift = 24, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "cecb_32k_sel_pre", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_cecb_32k_div.hw, + &s4_cecb_32k_clkin.hw + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_cecb_32k_sel = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_CECB_CTRL1, + .mask = 0x1, + .shift = 31, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "cecb_32k_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_cecb_32k_sel_pre.hw, + &s4_rtc_clk.hw + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_cecb_32k_clkout = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_CECB_CTRL0, + .bit_idx = 30, + }, + .hw.init = &(struct clk_init_data){ + .name = "cecb_32k_clkout", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_cecb_32k_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_parent_data s4_sc_parent_data[] = { + { .fw_name = "fclk_div4" }, + { .fw_name = "fclk_div3" }, + { .fw_name = "fclk_div5" }, + { .fw_name = "xtal", } +}; + +static struct clk_regmap s4_sc_clk_mux = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_SC_CLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data) { + .name = "sc_clk_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_sc_parent_data, + .num_parents = ARRAY_SIZE(s4_sc_parent_data), + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_sc_clk_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_SC_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "sc_clk_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_sc_clk_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_sc_clk_gate = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_SC_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "sc_clk_gate", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_sc_clk_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_12_24M_clk_gate = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_CLK12_24_CTRL, + .bit_idx = 11, + }, + .hw.init = &(struct clk_init_data) { + .name = "12_24m_gate", + .ops = &clk_regmap_gate_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", } + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor s4_12M_clk_div = { + .mult = 1, + .div = 2, + .hw.init = &(struct clk_init_data){ + .name = "12M", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_12_24M_clk_gate.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_12_24M_clk = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_CLK12_24_CTRL, + .mask = 0x1, + .shift = 10, + }, + .hw.init = &(struct clk_init_data) { + .name = "12_24m", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_12_24M_clk_gate.hw, + &s4_12M_clk_div.hw, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* Video Clocks */ +static struct clk_regmap s4_vid_pll_div = { + .data = &(struct meson_vid_pll_div_data){ + .val = { + .reg_off = CLKCTRL_VID_PLL_CLK_DIV, + .shift = 0, + .width = 15, + }, + .sel = { + .reg_off = CLKCTRL_VID_PLL_CLK_DIV, + .shift = 16, + .width = 2, + }, + }, + .hw.init = &(struct clk_init_data) { + .name = "vid_pll_div", + /* Same to g12a */ + .ops = &meson_vid_pll_div_ro_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "hdmi_pll", } + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vid_pll_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VID_PLL_CLK_DIV, + .mask = 0x1, + .shift = 18, + }, + .hw.init = &(struct clk_init_data){ + .name = "vid_pll_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .hw = &s4_vid_pll_div.hw }, + { .fw_name = "hdmi_pll", } + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vid_pll = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VID_PLL_CLK_DIV, + .bit_idx = 19, + }, + .hw.init = &(struct clk_init_data) { + .name = "vid_pll", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vid_pll_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_parent_data s4_vclk_parent_data[] = { + { .hw = &s4_vid_pll.hw }, + { .fw_name = "gp0_pll", }, + { .fw_name = "hifi_pll", }, + { .fw_name = "mpll1", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div4", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "fclk_div7", }, +}; + +static struct clk_regmap s4_vclk_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VID_CLK_CTRL, + .mask = 0x7, + .shift = 16, + }, + .hw.init = &(struct clk_init_data){ + .name = "vclk_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_vclk_parent_data, + .num_parents = ARRAY_SIZE(s4_vclk_parent_data), + }, +}; + +static struct clk_regmap s4_vclk2_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VIID_CLK_CTRL, + .mask = 0x7, + .shift = 16, + }, + .hw.init = &(struct clk_init_data){ + .name = "vclk2_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_vclk_parent_data, + .num_parents = ARRAY_SIZE(s4_vclk_parent_data), + }, +}; + +static struct clk_regmap s4_vclk_input = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VID_CLK_DIV, + .bit_idx = 16, + }, + .hw.init = &(struct clk_init_data) { + .name = "vclk_input", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vclk_sel.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vclk2_input = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VIID_CLK_DIV, + .bit_idx = 16, + }, + .hw.init = &(struct clk_init_data) { + .name = "vclk2_input", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2_sel.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vclk_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_VID_CLK_DIV, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "vclk_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vclk_input.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vclk2_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_VIID_CLK_DIV, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "vclk2_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vclk2_input.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vclk = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VID_CLK_CTRL, + .bit_idx = 19, + }, + .hw.init = &(struct clk_init_data) { + .name = "vclk", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vclk_div.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vclk2 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VIID_CLK_CTRL, + .bit_idx = 19, + }, + .hw.init = &(struct clk_init_data) { + .name = "vclk2", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2_div.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vclk_div1 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VID_CLK_CTRL, + .bit_idx = 0, + }, + .hw.init = &(struct clk_init_data) { + .name = "vclk_div1", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vclk_div2_en = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VID_CLK_CTRL, + .bit_idx = 1, + }, + .hw.init = &(struct clk_init_data) { + .name = "vclk_div2_en", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vclk_div4_en = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VID_CLK_CTRL, + .bit_idx = 2, + }, + .hw.init = &(struct clk_init_data) { + .name = "vclk_div4_en", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vclk_div6_en = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VID_CLK_CTRL, + .bit_idx = 3, + }, + .hw.init = &(struct clk_init_data) { + .name = "vclk_div6_en", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vclk_div12_en = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VID_CLK_CTRL, + .bit_idx = 4, + }, + .hw.init = &(struct clk_init_data) { + .name = "vclk_div12_en", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vclk2_div1 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VIID_CLK_CTRL, + .bit_idx = 0, + }, + .hw.init = &(struct clk_init_data) { + .name = "vclk2_div1", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vclk2_div2_en = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VIID_CLK_CTRL, + .bit_idx = 1, + }, + .hw.init = &(struct clk_init_data) { + .name = "vclk2_div2_en", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vclk2_div4_en = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VIID_CLK_CTRL, + .bit_idx = 2, + }, + .hw.init = &(struct clk_init_data) { + .name = "vclk2_div4_en", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vclk2_div6_en = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VIID_CLK_CTRL, + .bit_idx = 3, + }, + .hw.init = &(struct clk_init_data) { + .name = "vclk2_div6_en", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vclk2_div12_en = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VIID_CLK_CTRL, + .bit_idx = 4, + }, + .hw.init = &(struct clk_init_data) { + .name = "vclk2_div12_en", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_fixed_factor s4_vclk_div2 = { + .mult = 1, + .div = 2, + .hw.init = &(struct clk_init_data){ + .name = "vclk_div2", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vclk_div2_en.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_fixed_factor s4_vclk_div4 = { + .mult = 1, + .div = 4, + .hw.init = &(struct clk_init_data){ + .name = "vclk_div4", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vclk_div4_en.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_fixed_factor s4_vclk_div6 = { + .mult = 1, + .div = 6, + .hw.init = &(struct clk_init_data){ + .name = "vclk_div6", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vclk_div6_en.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_fixed_factor s4_vclk_div12 = { + .mult = 1, + .div = 12, + .hw.init = &(struct clk_init_data){ + .name = "vclk_div12", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vclk_div12_en.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_fixed_factor s4_vclk2_div2 = { + .mult = 1, + .div = 2, + .hw.init = &(struct clk_init_data){ + .name = "vclk2_div2", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vclk2_div2_en.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_fixed_factor s4_vclk2_div4 = { + .mult = 1, + .div = 4, + .hw.init = &(struct clk_init_data){ + .name = "vclk2_div4", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vclk2_div4_en.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_fixed_factor s4_vclk2_div6 = { + .mult = 1, + .div = 6, + .hw.init = &(struct clk_init_data){ + .name = "vclk2_div6", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vclk2_div6_en.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_fixed_factor s4_vclk2_div12 = { + .mult = 1, + .div = 12, + .hw.init = &(struct clk_init_data){ + .name = "vclk2_div12", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vclk2_div12_en.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* The 5,6,7 indexes corresponds to no real clock, so there are not used. */ +static u32 mux_table_cts_sel[] = { 0, 1, 2, 3, 4, 8, 9, 10, 11, 12 }; +static const struct clk_hw *s4_cts_parent_hws[] = { + &s4_vclk_div1.hw, + &s4_vclk_div2.hw, + &s4_vclk_div4.hw, + &s4_vclk_div6.hw, + &s4_vclk_div12.hw, + &s4_vclk2_div1.hw, + &s4_vclk2_div2.hw, + &s4_vclk2_div4.hw, + &s4_vclk2_div6.hw, + &s4_vclk2_div12.hw +}; + +static struct clk_regmap s4_cts_enci_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VID_CLK_DIV, + .mask = 0xf, + .shift = 28, + .table = mux_table_cts_sel, + }, + .hw.init = &(struct clk_init_data){ + .name = "cts_enci_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = s4_cts_parent_hws, + .num_parents = ARRAY_SIZE(s4_cts_parent_hws), + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_cts_encp_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VID_CLK_DIV, + .mask = 0xf, + .shift = 20, + .table = mux_table_cts_sel, + }, + .hw.init = &(struct clk_init_data){ + .name = "cts_encp_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = s4_cts_parent_hws, + .num_parents = ARRAY_SIZE(s4_cts_parent_hws), + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_cts_vdac_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VIID_CLK_DIV, + .mask = 0xf, + .shift = 28, + .table = mux_table_cts_sel, + }, + .hw.init = &(struct clk_init_data){ + .name = "cts_vdac_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = s4_cts_parent_hws, + .num_parents = ARRAY_SIZE(s4_cts_parent_hws), + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* The 5,6,7 indexes corresponds to no real clock, so there are not used. */ +static u32 mux_table_hdmi_tx_sel[] = { 0, 1, 2, 3, 4, 8, 9, 10, 11, 12 }; +static const struct clk_hw *s4_cts_hdmi_tx_parent_hws[] = { + &s4_vclk_div1.hw, + &s4_vclk_div2.hw, + &s4_vclk_div4.hw, + &s4_vclk_div6.hw, + &s4_vclk_div12.hw, + &s4_vclk2_div1.hw, + &s4_vclk2_div2.hw, + &s4_vclk2_div4.hw, + &s4_vclk2_div6.hw, + &s4_vclk2_div12.hw +}; + +static struct clk_regmap s4_hdmi_tx_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_HDMI_CLK_CTRL, + .mask = 0xf, + .shift = 16, + .table = mux_table_hdmi_tx_sel, + }, + .hw.init = &(struct clk_init_data){ + .name = "hdmi_tx_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = s4_cts_hdmi_tx_parent_hws, + .num_parents = ARRAY_SIZE(s4_cts_hdmi_tx_parent_hws), + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_cts_enci = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VID_CLK_CTRL2, + .bit_idx = 0, + }, + .hw.init = &(struct clk_init_data) { + .name = "cts_enci", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_cts_enci_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_cts_encp = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VID_CLK_CTRL2, + .bit_idx = 2, + }, + .hw.init = &(struct clk_init_data) { + .name = "cts_encp", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_cts_encp_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_cts_vdac = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VID_CLK_CTRL2, + .bit_idx = 4, + }, + .hw.init = &(struct clk_init_data) { + .name = "cts_vdac", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_cts_vdac_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_hdmi_tx = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VID_CLK_CTRL2, + .bit_idx = 5, + }, + .hw.init = &(struct clk_init_data) { + .name = "hdmi_tx", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_hdmi_tx_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* HDMI Clocks */ +static const struct clk_parent_data s4_hdmi_parent_data[] = { + { .fw_name = "xtal", }, + { .fw_name = "fclk_div4", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div5", } +}; + +static struct clk_regmap s4_hdmi_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_HDMI_CLK_CTRL, + .mask = 0x3, + .shift = 9, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "hdmi_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_hdmi_parent_data, + .num_parents = ARRAY_SIZE(s4_hdmi_parent_data), + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_hdmi_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_HDMI_CLK_CTRL, + .shift = 0, + .width = 7, + }, + .hw.init = &(struct clk_init_data){ + .name = "hdmi_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_hdmi_sel.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_hdmi = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_HDMI_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "hdmi", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_hdmi_div.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_ts_clk_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_TS_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "ts_clk_div", + .ops = &clk_regmap_divider_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_ts_clk_gate = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_TS_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "ts_clk", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_ts_clk_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* + * The MALI IP is clocked by two identical clocks (mali_0 and mali_1) + * muxed by a glitch-free switch. The CCF can manage this glitch-free + * mux because it does top-to-bottom updates the each clock tree and + * switches to the "inactive" one when CLK_SET_RATE_GATE is set. + */ +static const struct clk_parent_data s4_mali_0_1_parent_data[] = { + { .fw_name = "xtal", }, + { .fw_name = "gp0_pll", }, + { .fw_name = "hifi_pll", }, + { .fw_name = "fclk_div2p5", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div4", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "fclk_div7", } +}; + +static struct clk_regmap s4_mali_0_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_MALI_CLK_CTRL, + .mask = 0x7, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "mali_0_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_mali_0_1_parent_data, + .num_parents = ARRAY_SIZE(s4_mali_0_1_parent_data), + /* + * Don't request the parent to change the rate because + * all GPU frequencies can be derived from the fclk_* + * clocks and one special GP0_PLL setting. This is + * important because we need the MPLL clocks for audio. + */ + .flags = 0, + }, +}; + +static struct clk_regmap s4_mali_0_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_MALI_CLK_CTRL, + .shift = 0, + .width = 7, + }, + .hw.init = &(struct clk_init_data){ + .name = "mali_0_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_mali_0_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_mali_0 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_MALI_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "mali_0", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_mali_0_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_mali_1_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_MALI_CLK_CTRL, + .mask = 0x7, + .shift = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "mali_1_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_mali_0_1_parent_data, + .num_parents = ARRAY_SIZE(s4_mali_0_1_parent_data), + .flags = 0, + }, +}; + +static struct clk_regmap s4_mali_1_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_MALI_CLK_CTRL, + .shift = 16, + .width = 7, + }, + .hw.init = &(struct clk_init_data){ + .name = "mali_1_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_mali_1_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_mali_1 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_MALI_CLK_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data){ + .name = "mali_1", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_mali_1_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_hw *s4_mali_parent_hws[] = { + &s4_mali_0.hw, + &s4_mali_1.hw +}; + +static struct clk_regmap s4_mali_mux = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_MALI_CLK_CTRL, + .mask = 1, + .shift = 31, + }, + .hw.init = &(struct clk_init_data){ + .name = "mali", + .ops = &clk_regmap_mux_ops, + .parent_hws = s4_mali_parent_hws, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* VDEC clocks */ +static const struct clk_parent_data s4_dec_parent_data[] = { + { .fw_name = "fclk_div2p5", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div4", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "fclk_div7", }, + { .fw_name = "hifi_pll", }, + { .fw_name = "gp0_pll", }, + { .fw_name = "xtal", } +}; + +static struct clk_regmap s4_vdec_p0_mux = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VDEC_CLK_CTRL, + .mask = 0x7, + .shift = 9, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data) { + .name = "vdec_p0_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_dec_parent_data, + .num_parents = ARRAY_SIZE(s4_dec_parent_data), + }, +}; + +static struct clk_regmap s4_vdec_p0_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_VDEC_CLK_CTRL, + .shift = 0, + .width = 7, + .flags = CLK_DIVIDER_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data) { + .name = "vdec_p0_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vdec_p0_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vdec_p0 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VDEC_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "vdec_p0", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vdec_p0_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vdec_p1_mux = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VDEC3_CLK_CTRL, + .mask = 0x7, + .shift = 9, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data) { + .name = "vdec_p1_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_dec_parent_data, + .num_parents = ARRAY_SIZE(s4_dec_parent_data), + }, +}; + +static struct clk_regmap s4_vdec_p1_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_VDEC3_CLK_CTRL, + .shift = 0, + .width = 7, + .flags = CLK_DIVIDER_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data) { + .name = "vdec_p1_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vdec_p1_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vdec_p1 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VDEC3_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "vdec_p1", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vdec_p1_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_hw *s4_vdec_mux_parent_hws[] = { + &s4_vdec_p0.hw, + &s4_vdec_p1.hw +}; + +static struct clk_regmap s4_vdec_mux = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VDEC3_CLK_CTRL, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data) { + .name = "vdec_mux", + .ops = &clk_regmap_mux_ops, + .parent_hws = s4_vdec_mux_parent_hws, + .num_parents = ARRAY_SIZE(s4_vdec_mux_parent_hws), + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_hevcf_p0_mux = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VDEC2_CLK_CTRL, + .mask = 0x7, + .shift = 9, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data) { + .name = "hevcf_p0_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_dec_parent_data, + .num_parents = ARRAY_SIZE(s4_dec_parent_data), + }, +}; + +static struct clk_regmap s4_hevcf_p0_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_VDEC2_CLK_CTRL, + .shift = 0, + .width = 7, + .flags = CLK_DIVIDER_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data) { + .name = "hevcf_p0_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_hevcf_p0_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_hevcf_p0 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VDEC2_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "hevcf_p0_gate", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_hevcf_p0_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_hevcf_p1_mux = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VDEC4_CLK_CTRL, + .mask = 0x7, + .shift = 9, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data) { + .name = "hevcf_p1_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_dec_parent_data, + .num_parents = ARRAY_SIZE(s4_dec_parent_data), + }, +}; + +static struct clk_regmap s4_hevcf_p1_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_VDEC4_CLK_CTRL, + .shift = 0, + .width = 7, + .flags = CLK_DIVIDER_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data) { + .name = "hevcf_p1_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_hevcf_p1_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_hevcf_p1 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VDEC4_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "hevcf_p1", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_hevcf_p1_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_hw *s4_hevcf_mux_parent_hws[] = { + &s4_hevcf_p0.hw, + &s4_hevcf_p1.hw +}; + +static struct clk_regmap s4_hevcf_mux = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VDEC4_CLK_CTRL, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data) { + .name = "hevcf", + .ops = &clk_regmap_mux_ops, + .parent_hws = s4_hevcf_mux_parent_hws, + .num_parents = ARRAY_SIZE(s4_hevcf_mux_parent_hws), + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* VPU Clock */ +static const struct clk_parent_data s4_vpu_parent_data[] = { + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div4", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "fclk_div7", }, + { .fw_name = "mpll1", }, + { .hw = &s4_vid_pll.hw }, + { .fw_name = "hifi_pll", }, + { .fw_name = "gp0_pll", }, +}; + +static struct clk_regmap s4_vpu_0_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VPU_CLK_CTRL, + .mask = 0x7, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "vpu_0_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_vpu_parent_data, + .num_parents = ARRAY_SIZE(s4_vpu_parent_data), + }, +}; + +static struct clk_regmap s4_vpu_0_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_VPU_CLK_CTRL, + .shift = 0, + .width = 7, + }, + .hw.init = &(struct clk_init_data){ + .name = "vpu_0_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vpu_0_sel.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vpu_0 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VPU_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "vpu_0", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vpu_0_div.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vpu_1_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VPU_CLK_CTRL, + .mask = 0x7, + .shift = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "vpu_1_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_vpu_parent_data, + .num_parents = ARRAY_SIZE(s4_vpu_parent_data), + }, +}; + +static struct clk_regmap s4_vpu_1_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_VPU_CLK_CTRL, + .shift = 16, + .width = 7, + }, + .hw.init = &(struct clk_init_data){ + .name = "vpu_1_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vpu_1_sel.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vpu_1 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VPU_CLK_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data) { + .name = "vpu_1", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vpu_1_div.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vpu = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VPU_CLK_CTRL, + .mask = 1, + .shift = 31, + }, + .hw.init = &(struct clk_init_data){ + .name = "vpu", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vpu_0.hw, + &s4_vpu_1.hw, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_parent_data vpu_clkb_tmp_parent_data[] = { + { .hw = &s4_vpu.hw }, + { .fw_name = "fclk_div4", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "fclk_div7", } +}; + +static struct clk_regmap s4_vpu_clkb_tmp_mux = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VPU_CLKB_CTRL, + .mask = 0x3, + .shift = 20, + }, + .hw.init = &(struct clk_init_data) { + .name = "vpu_clkb_tmp_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = vpu_clkb_tmp_parent_data, + .num_parents = ARRAY_SIZE(vpu_clkb_tmp_parent_data), + }, +}; + +static struct clk_regmap s4_vpu_clkb_tmp_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_VPU_CLKB_CTRL, + .shift = 16, + .width = 4, + }, + .hw.init = &(struct clk_init_data) { + .name = "vpu_clkb_tmp_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vpu_clkb_tmp_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vpu_clkb_tmp = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VPU_CLKB_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data){ + .name = "vpu_clkb_tmp", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vpu_clkb_tmp_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vpu_clkb_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_VPU_CLKB_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "vpu_clkb_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vpu_clkb_tmp.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vpu_clkb = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VPU_CLKB_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "vpu_clkb", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vpu_clkb_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_parent_data s4_vpu_clkc_parent_data[] = { + { .fw_name = "fclk_div4", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "fclk_div7", }, + { .fw_name = "mpll1", }, + { .hw = &s4_vid_pll.hw }, + { .fw_name = "mpll2", }, + { .fw_name = "gp0_pll", }, +}; + +static struct clk_regmap s4_vpu_clkc_p0_mux = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VPU_CLKC_CTRL, + .mask = 0x7, + .shift = 9, + }, + .hw.init = &(struct clk_init_data) { + .name = "vpu_clkc_p0_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_vpu_clkc_parent_data, + .num_parents = ARRAY_SIZE(s4_vpu_clkc_parent_data), + }, +}; + +static struct clk_regmap s4_vpu_clkc_p0_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_VPU_CLKC_CTRL, + .shift = 0, + .width = 7, + }, + .hw.init = &(struct clk_init_data) { + .name = "vpu_clkc_p0_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vpu_clkc_p0_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vpu_clkc_p0 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VPU_CLKC_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "vpu_clkc_p0", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vpu_clkc_p0_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vpu_clkc_p1_mux = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VPU_CLKC_CTRL, + .mask = 0x7, + .shift = 25, + }, + .hw.init = &(struct clk_init_data) { + .name = "vpu_clkc_p1_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_vpu_clkc_parent_data, + .num_parents = ARRAY_SIZE(s4_vpu_clkc_parent_data), + }, +}; + +static struct clk_regmap s4_vpu_clkc_p1_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_VPU_CLKC_CTRL, + .shift = 16, + .width = 7, + }, + .hw.init = &(struct clk_init_data) { + .name = "vpu_clkc_p1_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vpu_clkc_p1_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vpu_clkc_p1 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VPU_CLKC_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data){ + .name = "vpu_clkc_p1", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vpu_clkc_p1_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_hw *s4_vpu_mux_parent_hws[] = { + &s4_vpu_clkc_p0.hw, + &s4_vpu_clkc_p1.hw +}; + +static struct clk_regmap s4_vpu_clkc_mux = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VPU_CLKC_CTRL, + .mask = 0x1, + .shift = 31, + }, + .hw.init = &(struct clk_init_data) { + .name = "vpu_clkc_mux", + .ops = &clk_regmap_mux_ops, + .parent_hws = s4_vpu_mux_parent_hws, + .num_parents = ARRAY_SIZE(s4_vpu_mux_parent_hws), + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* VAPB Clock */ +static const struct clk_parent_data s4_vapb_parent_data[] = { + { .fw_name = "fclk_div4", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "fclk_div7", }, + { .fw_name = "mpll1", }, + { .hw = &s4_vid_pll.hw }, + { .fw_name = "mpll2", }, + { .fw_name = "fclk_div2p5", }, +}; + +static struct clk_regmap s4_vapb_0_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VAPBCLK_CTRL, + .mask = 0x7, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "vapb_0_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_vapb_parent_data, + .num_parents = ARRAY_SIZE(s4_vapb_parent_data), + }, +}; + +static struct clk_regmap s4_vapb_0_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_VAPBCLK_CTRL, + .shift = 0, + .width = 7, + }, + .hw.init = &(struct clk_init_data){ + .name = "vapb_0_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vapb_0_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vapb_0 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VAPBCLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "vapb_0", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vapb_0_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vapb_1_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VAPBCLK_CTRL, + .mask = 0x7, + .shift = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "vapb_1_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_vapb_parent_data, + .num_parents = ARRAY_SIZE(s4_vapb_parent_data), + }, +}; + +static struct clk_regmap s4_vapb_1_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_VAPBCLK_CTRL, + .shift = 16, + .width = 7, + }, + .hw.init = &(struct clk_init_data){ + .name = "vapb_1_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vapb_1_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vapb_1 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VAPBCLK_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data) { + .name = "vapb_1", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vapb_1_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vapb = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VAPBCLK_CTRL, + .mask = 1, + .shift = 31, + }, + .hw.init = &(struct clk_init_data){ + .name = "vapb_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vapb_0.hw, + &s4_vapb_1.hw + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_ge2d_gate = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VAPBCLK_CTRL, + .bit_idx = 30, + }, + .hw.init = &(struct clk_init_data) { + .name = "ge2d_clk", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vapb.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_parent_data s4_esmclk_parent_data[] = { + { .fw_name = "fclk_div7", }, + { .fw_name = "fclk_div4", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div5", }, +}; + +static struct clk_regmap s4_hdcp22_esmclk_mux = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_HDCP22_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data) { + .name = "hdcp22_esmclk_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_esmclk_parent_data, + .num_parents = ARRAY_SIZE(s4_esmclk_parent_data), + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_hdcp22_esmclk_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_HDCP22_CTRL, + .shift = 0, + .width = 7, + }, + .hw.init = &(struct clk_init_data) { + .name = "hdcp22_esmclk_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_hdcp22_esmclk_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_hdcp22_esmclk_gate = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_HDCP22_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "hdcp22_esmclk_gate", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_hdcp22_esmclk_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_parent_data s4_skpclk_parent_data[] = { + { .fw_name = "xtal", }, + { .fw_name = "fclk_div4", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div5", }, +}; + +static struct clk_regmap s4_hdcp22_skpclk_mux = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_HDCP22_CTRL, + .mask = 0x3, + .shift = 25, + }, + .hw.init = &(struct clk_init_data) { + .name = "hdcp22_skpclk_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_skpclk_parent_data, + .num_parents = ARRAY_SIZE(s4_skpclk_parent_data), + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_hdcp22_skpclk_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_HDCP22_CTRL, + .shift = 16, + .width = 7, + }, + .hw.init = &(struct clk_init_data) { + .name = "hdcp22_skpclk_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_hdcp22_skpclk_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_hdcp22_skpclk_gate = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_HDCP22_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data){ + .name = "hdcp22_skpclk_gate", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_hdcp22_skpclk_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_parent_data s4_vdin_parent_data[] = { + { .fw_name = "xtal", }, + { .fw_name = "fclk_div4", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div5", }, + { .hw = &s4_vid_pll.hw } +}; + +static struct clk_regmap s4_vdin_meas_mux = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VDIN_MEAS_CLK_CTRL, + .mask = 0x7, + .shift = 9, + }, + .hw.init = &(struct clk_init_data) { + .name = "vdin_meas_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_vdin_parent_data, + .num_parents = ARRAY_SIZE(s4_vdin_parent_data), + }, +}; + +static struct clk_regmap s4_vdin_meas_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_VDIN_MEAS_CLK_CTRL, + .shift = 0, + .width = 7, + }, + .hw.init = &(struct clk_init_data) { + .name = "vdin_meas_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vdin_meas_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vdin_meas_gate = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VDIN_MEAS_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "vdin_meas_gate", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vdin_meas_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* EMMC/NAND clock */ +static const struct clk_parent_data s4_sd_emmc_clk0_parent_data[] = { + { .fw_name = "xtal", }, + { .fw_name = "fclk_div2", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "hifi_pll", }, + { .fw_name = "fclk_div2p5", }, + { .fw_name = "mpll2", }, + { .fw_name = "mpll3", }, + { .fw_name = "gp0_pll", }, +}; + +static struct clk_regmap s4_sd_emmc_c_clk0_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_NAND_CLK_CTRL, + .mask = 0x7, + .shift = 9, + }, + .hw.init = &(struct clk_init_data) { + .name = "sd_emmc_c_clk0_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_sd_emmc_clk0_parent_data, + .num_parents = ARRAY_SIZE(s4_sd_emmc_clk0_parent_data), + }, +}; + +static struct clk_regmap s4_sd_emmc_c_clk0_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_NAND_CLK_CTRL, + .shift = 0, + .width = 7, + }, + .hw.init = &(struct clk_init_data) { + .name = "sd_emmc_c_clk0_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_sd_emmc_c_clk0_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_sd_emmc_c_clk0 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_NAND_CLK_CTRL, + .bit_idx = 7, + }, + .hw.init = &(struct clk_init_data){ + .name = "sd_emmc_c_clk0", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_sd_emmc_c_clk0_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_sd_emmc_a_clk0_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, + .mask = 0x7, + .shift = 9, + }, + .hw.init = &(struct clk_init_data) { + .name = "sd_emmc_a_clk0_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_sd_emmc_clk0_parent_data, + .num_parents = ARRAY_SIZE(s4_sd_emmc_clk0_parent_data), + }, +}; + +static struct clk_regmap s4_sd_emmc_a_clk0_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, + .shift = 0, + .width = 7, + }, + .hw.init = &(struct clk_init_data) { + .name = "sd_emmc_a_clk0_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_sd_emmc_a_clk0_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_sd_emmc_a_clk0 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, + .bit_idx = 7, + }, + .hw.init = &(struct clk_init_data){ + .name = "sd_emmc_a_clk0", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_sd_emmc_a_clk0_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_sd_emmc_b_clk0_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, + .mask = 0x7, + .shift = 25, + }, + .hw.init = &(struct clk_init_data) { + .name = "sd_emmc_b_clk0_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_sd_emmc_clk0_parent_data, + .num_parents = ARRAY_SIZE(s4_sd_emmc_clk0_parent_data), + }, +}; + +static struct clk_regmap s4_sd_emmc_b_clk0_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, + .shift = 16, + .width = 7, + }, + .hw.init = &(struct clk_init_data) { + .name = "sd_emmc_b_clk0_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_sd_emmc_b_clk0_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_sd_emmc_b_clk0 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, + .bit_idx = 23, + }, + .hw.init = &(struct clk_init_data){ + .name = "sd_emmc_b_clk0", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_sd_emmc_b_clk0_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* SPICC Clock */ +static const struct clk_parent_data s4_spicc_parent_data[] = { + { .fw_name = "xtal", }, + { .hw = &s4_sys_clk.hw }, + { .fw_name = "fclk_div4", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div2", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "fclk_div7", }, +}; + +static struct clk_regmap s4_spicc0_mux = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_SPICC_CLK_CTRL, + .mask = 0x7, + .shift = 7, + }, + .hw.init = &(struct clk_init_data) { + .name = "spicc0_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_spicc_parent_data, + .num_parents = ARRAY_SIZE(s4_spicc_parent_data), + }, +}; + +static struct clk_regmap s4_spicc0_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_SPICC_CLK_CTRL, + .shift = 0, + .width = 6, + }, + .hw.init = &(struct clk_init_data) { + .name = "spicc0_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_spicc0_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_spicc0_gate = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_SPICC_CLK_CTRL, + .bit_idx = 6, + }, + .hw.init = &(struct clk_init_data){ + .name = "spicc0", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_spicc0_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* PWM Clock */ +static const struct clk_parent_data s4_pwm_parent_data[] = { + { .fw_name = "xtal", }, + { .hw = &s4_vid_pll.hw }, + { .fw_name = "fclk_div4", }, + { .fw_name = "fclk_div3", }, +}; + +static struct clk_regmap s4_pwm_a_mux = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_PWM_CLK_AB_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_a_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_pwm_parent_data, + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), + }, +}; + +static struct clk_regmap s4_pwm_a_div = { + .data = &(struct clk_regmap_div_data) { + .offset = CLKCTRL_PWM_CLK_AB_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_a_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_a_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_a_gate = { + .data = &(struct clk_regmap_gate_data) { + .offset = CLKCTRL_PWM_CLK_AB_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_a_gate", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_a_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_b_mux = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_PWM_CLK_AB_CTRL, + .mask = 0x3, + .shift = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_b_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_pwm_parent_data, + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), + }, +}; + +static struct clk_regmap s4_pwm_b_div = { + .data = &(struct clk_regmap_div_data) { + .offset = CLKCTRL_PWM_CLK_AB_CTRL, + .shift = 16, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_b_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_b_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_b_gate = { + .data = &(struct clk_regmap_gate_data) { + .offset = CLKCTRL_PWM_CLK_AB_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_b_gate", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_b_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_c_mux = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_PWM_CLK_CD_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_c_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_pwm_parent_data, + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), + }, +}; + +static struct clk_regmap s4_pwm_c_div = { + .data = &(struct clk_regmap_div_data) { + .offset = CLKCTRL_PWM_CLK_CD_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_c_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_c_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_c_gate = { + .data = &(struct clk_regmap_gate_data) { + .offset = CLKCTRL_PWM_CLK_CD_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_c_gate", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_c_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_d_mux = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_PWM_CLK_CD_CTRL, + .mask = 0x3, + .shift = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_d_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_pwm_parent_data, + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), + }, +}; + +static struct clk_regmap s4_pwm_d_div = { + .data = &(struct clk_regmap_div_data) { + .offset = CLKCTRL_PWM_CLK_CD_CTRL, + .shift = 16, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_d_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_d_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_d_gate = { + .data = &(struct clk_regmap_gate_data) { + .offset = CLKCTRL_PWM_CLK_CD_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_d_gate", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_d_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_e_mux = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_PWM_CLK_EF_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_e_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_pwm_parent_data, + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), + }, +}; + +static struct clk_regmap s4_pwm_e_div = { + .data = &(struct clk_regmap_div_data) { + .offset = CLKCTRL_PWM_CLK_EF_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_e_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_e_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_e_gate = { + .data = &(struct clk_regmap_gate_data) { + .offset = CLKCTRL_PWM_CLK_EF_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_e_gate", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_e_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_f_mux = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_PWM_CLK_EF_CTRL, + .mask = 0x3, + .shift = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_f_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_pwm_parent_data, + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), + }, +}; + +static struct clk_regmap s4_pwm_f_div = { + .data = &(struct clk_regmap_div_data) { + .offset = CLKCTRL_PWM_CLK_EF_CTRL, + .shift = 16, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_f_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_f_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_f_gate = { + .data = &(struct clk_regmap_gate_data) { + .offset = CLKCTRL_PWM_CLK_EF_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_f_gate", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_f_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_g_mux = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_PWM_CLK_GH_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_g_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_pwm_parent_data, + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), + }, +}; + +static struct clk_regmap s4_pwm_g_div = { + .data = &(struct clk_regmap_div_data) { + .offset = CLKCTRL_PWM_CLK_GH_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_g_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_g_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_g_gate = { + .data = &(struct clk_regmap_gate_data) { + .offset = CLKCTRL_PWM_CLK_GH_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_g_gate", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_g_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_h_mux = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_PWM_CLK_GH_CTRL, + .mask = 0x3, + .shift = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_h_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_pwm_parent_data, + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), + }, +}; + +static struct clk_regmap s4_pwm_h_div = { + .data = &(struct clk_regmap_div_data) { + .offset = CLKCTRL_PWM_CLK_GH_CTRL, + .shift = 16, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_h_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_h_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_h_gate = { + .data = &(struct clk_regmap_gate_data) { + .offset = CLKCTRL_PWM_CLK_GH_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_h_gate", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_h_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_i_mux = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_i_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_pwm_parent_data, + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), + }, +}; + +static struct clk_regmap s4_pwm_i_div = { + .data = &(struct clk_regmap_div_data) { + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_i_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_i_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_i_gate = { + .data = &(struct clk_regmap_gate_data) { + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_i_gate", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_i_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_j_mux = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, + .mask = 0x3, + .shift = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_j_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_pwm_parent_data, + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), + }, +}; + +static struct clk_regmap s4_pwm_j_div = { + .data = &(struct clk_regmap_div_data) { + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, + .shift = 16, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_j_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_h_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_j_gate = { + .data = &(struct clk_regmap_gate_data) { + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_j_gate", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_j_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_saradc_mux = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_SAR_CLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "saradc_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", }, + { .hw = &s4_sys_clk.hw }, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_saradc_div = { + .data = &(struct clk_regmap_div_data) { + .offset = CLKCTRL_SAR_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "saradc_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_saradc_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_saradc_gate = { + .data = &(struct clk_regmap_gate_data) { + .offset = CLKCTRL_SAR_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "saradc_clk", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_saradc_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* + * gen clk is designed for debug/monitor some internal clock quality. Some of the + * corresponding clock sources are not described in the clock tree and internal clock + * for debug, so they are skipped. + */ +static u32 s4_gen_clk_mux_table[] = { 0, 4, 5, 7, 19, 21, 22, + 23, 24, 25, 26, 27, 28 }; +static const struct clk_parent_data s4_gen_clk_parent_data[] = { + { .fw_name = "xtal", }, + { .hw = &s4_vid_pll.hw }, + { .fw_name = "gp0_pll", }, + { .fw_name = "hifi_pll", }, + { .fw_name = "fclk_div2", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div4", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "fclk_div7", }, + { .fw_name = "mpll0", }, + { .fw_name = "mpll1", }, + { .fw_name = "mpll2", }, + { .fw_name = "mpll3", }, +}; + +static struct clk_regmap s4_gen_clk_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_GEN_CLK_CTRL, + .mask = 0x1f, + .shift = 12, + .table = s4_gen_clk_mux_table, + }, + .hw.init = &(struct clk_init_data){ + .name = "gen_clk_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_gen_clk_parent_data, + .num_parents = ARRAY_SIZE(s4_gen_clk_parent_data), + }, +}; + +static struct clk_regmap s4_gen_clk_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_GEN_CLK_CTRL, + .shift = 0, + .width = 11, + }, + .hw.init = &(struct clk_init_data){ + .name = "gen_clk_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_gen_clk_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_gen_clk = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_GEN_CLK_CTRL, + .bit_idx = 11, + }, + .hw.init = &(struct clk_init_data) { + .name = "gen_clk", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_gen_clk_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE, + }, +}; + +static const struct clk_parent_data s4_adc_extclk_in_parent_data[] = { + { .fw_name = "xtal", }, + { .fw_name = "fclk_div4", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "fclk_div7", }, + { .fw_name = "mpll2", }, + { .fw_name = "gp0_pll", }, + { .fw_name = "hifi_pll", }, +}; + +static struct clk_regmap s4_adc_extclk_in_mux = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_DEMOD_CLK_CTRL, + .mask = 0x7, + .shift = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "adc_extclk_in_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_adc_extclk_in_parent_data, + .num_parents = ARRAY_SIZE(s4_adc_extclk_in_parent_data), + }, +}; + +static struct clk_regmap s4_adc_extclk_in_div = { + .data = &(struct clk_regmap_div_data) { + .offset = CLKCTRL_DEMOD_CLK_CTRL, + .shift = 16, + .width = 7, + }, + .hw.init = &(struct clk_init_data){ + .name = "adc_extclk_in_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_adc_extclk_in_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_adc_extclk_in_gate = { + .data = &(struct clk_regmap_gate_data) { + .offset = CLKCTRL_DEMOD_CLK_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data){ + .name = "adc_extclk_in", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_adc_extclk_in_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_demod_core_clk_mux = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_DEMOD_CLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "demod_core_clk_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", }, + { .fw_name = "fclk_div7", }, + { .fw_name = "fclk_div4", }, + { .hw = &s4_adc_extclk_in_gate.hw } + }, + .num_parents = 4, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_demod_core_clk_div = { + .data = &(struct clk_regmap_div_data) { + .offset = CLKCTRL_DEMOD_CLK_CTRL, + .shift = 0, + .width = 7, + }, + .hw.init = &(struct clk_init_data){ + .name = "demod_core_clk_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_demod_core_clk_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_demod_core_clk_gate = { + .data = &(struct clk_regmap_gate_data) { + .offset = CLKCTRL_DEMOD_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "demod_core_clk", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_demod_core_clk_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +#define MESON_GATE(_name, _reg, _bit) \ + MESON_PCLK(_name, _reg, _bit, &s4_sys_clk.hw) + +static MESON_GATE(s4_ddr, CLKCTRL_SYS_CLK_EN0_REG0, 0); +static MESON_GATE(s4_dos, CLKCTRL_SYS_CLK_EN0_REG0, 1); +static MESON_GATE(s4_ethphy, CLKCTRL_SYS_CLK_EN0_REG0, 4); +static MESON_GATE(s4_mali, CLKCTRL_SYS_CLK_EN0_REG0, 6); +static MESON_GATE(s4_aocpu, CLKCTRL_SYS_CLK_EN0_REG0, 13); +static MESON_GATE(s4_aucpu, CLKCTRL_SYS_CLK_EN0_REG0, 14); +static MESON_GATE(s4_cec, CLKCTRL_SYS_CLK_EN0_REG0, 16); +static MESON_GATE(s4_sdemmca, CLKCTRL_SYS_CLK_EN0_REG0, 24); +static MESON_GATE(s4_sdemmcb, CLKCTRL_SYS_CLK_EN0_REG0, 25); +static MESON_GATE(s4_nand, CLKCTRL_SYS_CLK_EN0_REG0, 26); +static MESON_GATE(s4_smartcard, CLKCTRL_SYS_CLK_EN0_REG0, 27); +static MESON_GATE(s4_acodec, CLKCTRL_SYS_CLK_EN0_REG0, 28); +static MESON_GATE(s4_spifc, CLKCTRL_SYS_CLK_EN0_REG0, 29); +static MESON_GATE(s4_msr_clk, CLKCTRL_SYS_CLK_EN0_REG0, 30); +static MESON_GATE(s4_ir_ctrl, CLKCTRL_SYS_CLK_EN0_REG0, 31); +static MESON_GATE(s4_audio, CLKCTRL_SYS_CLK_EN0_REG1, 0); +static MESON_GATE(s4_eth, CLKCTRL_SYS_CLK_EN0_REG1, 3); +static MESON_GATE(s4_uart_a, CLKCTRL_SYS_CLK_EN0_REG1, 5); +static MESON_GATE(s4_uart_b, CLKCTRL_SYS_CLK_EN0_REG1, 6); +static MESON_GATE(s4_uart_c, CLKCTRL_SYS_CLK_EN0_REG1, 7); +static MESON_GATE(s4_uart_d, CLKCTRL_SYS_CLK_EN0_REG1, 8); +static MESON_GATE(s4_uart_e, CLKCTRL_SYS_CLK_EN0_REG1, 9); +static MESON_GATE(s4_aififo, CLKCTRL_SYS_CLK_EN0_REG1, 11); +static MESON_GATE(s4_ts_ddr, CLKCTRL_SYS_CLK_EN0_REG1, 15); +static MESON_GATE(s4_ts_pll, CLKCTRL_SYS_CLK_EN0_REG1, 16); +static MESON_GATE(s4_g2d, CLKCTRL_SYS_CLK_EN0_REG1, 20); +static MESON_GATE(s4_spicc0, CLKCTRL_SYS_CLK_EN0_REG1, 21); +static MESON_GATE(s4_usb, CLKCTRL_SYS_CLK_EN0_REG1, 26); +static MESON_GATE(s4_i2c_m_a, CLKCTRL_SYS_CLK_EN0_REG1, 30); +static MESON_GATE(s4_i2c_m_b, CLKCTRL_SYS_CLK_EN0_REG1, 31); +static MESON_GATE(s4_i2c_m_c, CLKCTRL_SYS_CLK_EN0_REG2, 0); +static MESON_GATE(s4_i2c_m_d, CLKCTRL_SYS_CLK_EN0_REG2, 1); +static MESON_GATE(s4_i2c_m_e, CLKCTRL_SYS_CLK_EN0_REG2, 2); +static MESON_GATE(s4_hdmitx_apb, CLKCTRL_SYS_CLK_EN0_REG2, 4); +static MESON_GATE(s4_i2c_s_a, CLKCTRL_SYS_CLK_EN0_REG2, 5); +static MESON_GATE(s4_usb1_to_ddr, CLKCTRL_SYS_CLK_EN0_REG2, 8); +static MESON_GATE(s4_hdcp22, CLKCTRL_SYS_CLK_EN0_REG2, 10); +static MESON_GATE(s4_mmc_apb, CLKCTRL_SYS_CLK_EN0_REG2, 11); +static MESON_GATE(s4_rsa, CLKCTRL_SYS_CLK_EN0_REG2, 18); +static MESON_GATE(s4_cpu_debug, CLKCTRL_SYS_CLK_EN0_REG2, 19); +static MESON_GATE(s4_vpu_intr, CLKCTRL_SYS_CLK_EN0_REG2, 25); +static MESON_GATE(s4_demod, CLKCTRL_SYS_CLK_EN0_REG2, 27); +static MESON_GATE(s4_sar_adc, CLKCTRL_SYS_CLK_EN0_REG2, 28); +static MESON_GATE(s4_gic, CLKCTRL_SYS_CLK_EN0_REG2, 30); +static MESON_GATE(s4_pwm_ab, CLKCTRL_SYS_CLK_EN0_REG3, 7); +static MESON_GATE(s4_pwm_cd, CLKCTRL_SYS_CLK_EN0_REG3, 8); +static MESON_GATE(s4_pwm_ef, CLKCTRL_SYS_CLK_EN0_REG3, 9); +static MESON_GATE(s4_pwm_gh, CLKCTRL_SYS_CLK_EN0_REG3, 10); +static MESON_GATE(s4_pwm_ij, CLKCTRL_SYS_CLK_EN0_REG3, 11); + +/* Array of all clocks provided by this provider */ +static struct clk_hw_onecell_data s4_periphs_hw_onecell_data = { + .hws = { + [CLKID_RTC_32K_CLKIN] = &s4_rtc_32k_by_oscin_clkin.hw, + [CLKID_RTC_32K_DIV] = &s4_rtc_32k_by_oscin_div.hw, + [CLKID_RTC_32K_SEL] = &s4_rtc_32k_by_oscin_sel.hw, + [CLKID_RTC_32K_XATL] = &s4_rtc_32k_by_oscin.hw, + [CLKID_RTC_CLK] = &s4_rtc_clk.hw, + [CLKID_SYS_CLK_B_SEL] = &s4_sysclk_b_sel.hw, + [CLKID_SYS_CLK_B_DIV] = &s4_sysclk_b_div.hw, + [CLKID_SYS_CLK_B_GATE] = &s4_sysclk_b.hw, + [CLKID_SYS_CLK_A_SEL] = &s4_sysclk_a_sel.hw, + [CLKID_SYS_CLK_A_DIV] = &s4_sysclk_a_div.hw, + [CLKID_SYS_CLK_A_GATE] = &s4_sysclk_a.hw, + [CLKID_SYS_CLK] = &s4_sys_clk.hw, + [CLKID_CECA_32K_CLKIN] = &s4_ceca_32k_clkin.hw, + [CLKID_CECA_32K_DIV] = &s4_ceca_32k_div.hw, + [CLKID_CECA_32K_SEL_PRE] = &s4_ceca_32k_sel_pre.hw, + [CLKID_CECA_32K_SEL] = &s4_ceca_32k_sel.hw, + [CLKID_CECA_32K_CLKOUT] = &s4_ceca_32k_clkout.hw, + [CLKID_CECB_32K_CLKIN] = &s4_cecb_32k_clkin.hw, + [CLKID_CECB_32K_DIV] = &s4_cecb_32k_div.hw, + [CLKID_CECB_32K_SEL_PRE] = &s4_cecb_32k_sel_pre.hw, + [CLKID_CECB_32K_SEL] = &s4_cecb_32k_sel.hw, + [CLKID_CECB_32K_CLKOUT] = &s4_cecb_32k_clkout.hw, + [CLKID_SC_CLK_SEL] = &s4_sc_clk_mux.hw, + [CLKID_SC_CLK_DIV] = &s4_sc_clk_div.hw, + [CLKID_SC_CLK_GATE] = &s4_sc_clk_gate.hw, + [CLKID_12_24M_CLK_GATE] = &s4_12_24M_clk_gate.hw, + [CLKID_12M_CLK_DIV] = &s4_12M_clk_div.hw, + [CLKID_12_24M_CLK_SEL] = &s4_12_24M_clk.hw, + [CLKID_VID_PLL_DIV] = &s4_vid_pll_div.hw, + [CLKID_VID_PLL_SEL] = &s4_vid_pll_sel.hw, + [CLKID_VID_PLL] = &s4_vid_pll.hw, + [CLKID_VCLK_SEL] = &s4_vclk_sel.hw, + [CLKID_VCLK2_SEL] = &s4_vclk2_sel.hw, + [CLKID_VCLK_INPUT] = &s4_vclk_input.hw, + [CLKID_VCLK2_INPUT] = &s4_vclk2_input.hw, + [CLKID_VCLK_DIV] = &s4_vclk_div.hw, + [CLKID_VCLK2_DIV] = &s4_vclk2_div.hw, + [CLKID_VCLK] = &s4_vclk.hw, + [CLKID_VCLK2] = &s4_vclk2.hw, + [CLKID_VCLK_DIV1] = &s4_vclk_div1.hw, + [CLKID_VCLK_DIV2_EN] = &s4_vclk_div2_en.hw, + [CLKID_VCLK_DIV4_EN] = &s4_vclk_div4_en.hw, + [CLKID_VCLK_DIV6_EN] = &s4_vclk_div6_en.hw, + [CLKID_VCLK_DIV12_EN] = &s4_vclk_div12_en.hw, + [CLKID_VCLK2_DIV1] = &s4_vclk2_div1.hw, + [CLKID_VCLK2_DIV2_EN] = &s4_vclk2_div2_en.hw, + [CLKID_VCLK2_DIV4_EN] = &s4_vclk2_div4_en.hw, + [CLKID_VCLK2_DIV6_EN] = &s4_vclk2_div6_en.hw, + [CLKID_VCLK2_DIV12_EN] = &s4_vclk2_div12_en.hw, + [CLKID_VCLK_DIV2] = &s4_vclk_div2.hw, + [CLKID_VCLK_DIV4] = &s4_vclk_div4.hw, + [CLKID_VCLK_DIV6] = &s4_vclk_div6.hw, + [CLKID_VCLK_DIV12] = &s4_vclk_div12.hw, + [CLKID_VCLK2_DIV2] = &s4_vclk2_div2.hw, + [CLKID_VCLK2_DIV4] = &s4_vclk2_div4.hw, + [CLKID_VCLK2_DIV6] = &s4_vclk2_div6.hw, + [CLKID_VCLK2_DIV12] = &s4_vclk2_div12.hw, + [CLKID_CTS_ENCI_SEL] = &s4_cts_enci_sel.hw, + [CLKID_CTS_ENCP_SEL] = &s4_cts_encp_sel.hw, + [CLKID_CTS_VDAC_SEL] = &s4_cts_vdac_sel.hw, + [CLKID_HDMI_TX_SEL] = &s4_hdmi_tx_sel.hw, + [CLKID_CTS_ENCI] = &s4_cts_enci.hw, + [CLKID_CTS_ENCP] = &s4_cts_encp.hw, + [CLKID_CTS_VDAC] = &s4_cts_vdac.hw, + [CLKID_HDMI_TX] = &s4_hdmi_tx.hw, + [CLKID_HDMI_SEL] = &s4_hdmi_sel.hw, + [CLKID_HDMI_DIV] = &s4_hdmi_div.hw, + [CLKID_HDMI] = &s4_hdmi.hw, + [CLKID_TS_CLK_DIV] = &s4_ts_clk_div.hw, + [CLKID_TS_CLK_GATE] = &s4_ts_clk_gate.hw, + [CLKID_MALI_0_SEL] = &s4_mali_0_sel.hw, + [CLKID_MALI_0_DIV] = &s4_mali_0_div.hw, + [CLKID_MALI_0] = &s4_mali_0.hw, + [CLKID_MALI_1_SEL] = &s4_mali_1_sel.hw, + [CLKID_MALI_1_DIV] = &s4_mali_1_div.hw, + [CLKID_MALI_1] = &s4_mali_1.hw, + [CLKID_MALI] = &s4_mali_mux.hw, + [CLKID_VDEC_P0_SEL] = &s4_vdec_p0_mux.hw, + [CLKID_VDEC_P0_DIV] = &s4_vdec_p0_div.hw, + [CLKID_VDEC_P0] = &s4_vdec_p0.hw, + [CLKID_VDEC_P1_SEL] = &s4_vdec_p1_mux.hw, + [CLKID_VDEC_P1_DIV] = &s4_vdec_p1_div.hw, + [CLKID_VDEC_P1] = &s4_vdec_p1.hw, + [CLKID_VDEC_SEL] = &s4_vdec_mux.hw, + [CLKID_HEVCF_P0_SEL] = &s4_hevcf_p0_mux.hw, + [CLKID_HEVCF_P0_DIV] = &s4_hevcf_p0_div.hw, + [CLKID_HEVCF_P0] = &s4_hevcf_p0.hw, + [CLKID_HEVCF_P1_SEL] = &s4_hevcf_p1_mux.hw, + [CLKID_HEVCF_P1_DIV] = &s4_hevcf_p1_div.hw, + [CLKID_HEVCF_P1] = &s4_hevcf_p1.hw, + [CLKID_HEVCF_SEL] = &s4_hevcf_mux.hw, + [CLKID_VPU_0_SEL] = &s4_vpu_0_sel.hw, + [CLKID_VPU_0_DIV] = &s4_vpu_0_div.hw, + [CLKID_VPU_0] = &s4_vpu_0.hw, + [CLKID_VPU_1_SEL] = &s4_vpu_1_sel.hw, + [CLKID_VPU_1_DIV] = &s4_vpu_1_div.hw, + [CLKID_VPU_1] = &s4_vpu_1.hw, + [CLKID_VPU] = &s4_vpu.hw, + [CLKID_VPU_CLKB_TMP_SEL] = &s4_vpu_clkb_tmp_mux.hw, + [CLKID_VPU_CLKB_TMP_DIV] = &s4_vpu_clkb_tmp_div.hw, + [CLKID_VPU_CLKB_TMP] = &s4_vpu_clkb_tmp.hw, + [CLKID_VPU_CLKB_DIV] = &s4_vpu_clkb_div.hw, + [CLKID_VPU_CLKB] = &s4_vpu_clkb.hw, + [CLKID_VPU_CLKC_P0_SEL] = &s4_vpu_clkc_p0_mux.hw, + [CLKID_VPU_CLKC_P0_DIV] = &s4_vpu_clkc_p0_div.hw, + [CLKID_VPU_CLKC_P0] = &s4_vpu_clkc_p0.hw, + [CLKID_VPU_CLKC_P1_SEL] = &s4_vpu_clkc_p1_mux.hw, + [CLKID_VPU_CLKC_P1_DIV] = &s4_vpu_clkc_p1_div.hw, + [CLKID_VPU_CLKC_P1] = &s4_vpu_clkc_p1.hw, + [CLKID_VPU_CLKC_SEL] = &s4_vpu_clkc_mux.hw, + [CLKID_VAPB_0_SEL] = &s4_vapb_0_sel.hw, + [CLKID_VAPB_0_DIV] = &s4_vapb_0_div.hw, + [CLKID_VAPB_0] = &s4_vapb_0.hw, + [CLKID_VAPB_1_SEL] = &s4_vapb_1_sel.hw, + [CLKID_VAPB_1_DIV] = &s4_vapb_1_div.hw, + [CLKID_VAPB_1] = &s4_vapb_1.hw, + [CLKID_VAPB] = &s4_vapb.hw, + [CLKID_GE2D] = &s4_ge2d_gate.hw, + [CLKID_VDIN_MEAS_SEL] = &s4_vdin_meas_mux.hw, + [CLKID_VDIN_MEAS_DIV] = &s4_vdin_meas_div.hw, + [CLKID_VDIN_MEAS_GATE] = &s4_vdin_meas_gate.hw, + [CLKID_SD_EMMC_C_CLK_SEL] = &s4_sd_emmc_c_clk0_sel.hw, + [CLKID_SD_EMMC_C_CLK_DIV] = &s4_sd_emmc_c_clk0_div.hw, + [CLKID_SD_EMMC_C_CLK] = &s4_sd_emmc_c_clk0.hw, + [CLKID_SD_EMMC_A_CLK_SEL] = &s4_sd_emmc_a_clk0_sel.hw, + [CLKID_SD_EMMC_A_CLK_DIV] = &s4_sd_emmc_a_clk0_div.hw, + [CLKID_SD_EMMC_A_CLK] = &s4_sd_emmc_a_clk0.hw, + [CLKID_SD_EMMC_B_CLK_SEL] = &s4_sd_emmc_b_clk0_sel.hw, + [CLKID_SD_EMMC_B_CLK_DIV] = &s4_sd_emmc_b_clk0_div.hw, + [CLKID_SD_EMMC_B_CLK] = &s4_sd_emmc_b_clk0.hw, + [CLKID_SPICC0_SEL] = &s4_spicc0_mux.hw, + [CLKID_SPICC0_DIV] = &s4_spicc0_div.hw, + [CLKID_SPICC0_GATE] = &s4_spicc0_gate.hw, + [CLKID_PWM_A_SEL] = &s4_pwm_a_mux.hw, + [CLKID_PWM_A_DIV] = &s4_pwm_a_div.hw, + [CLKID_PWM_A_GATE] = &s4_pwm_a_gate.hw, + [CLKID_PWM_B_SEL] = &s4_pwm_b_mux.hw, + [CLKID_PWM_B_DIV] = &s4_pwm_b_div.hw, + [CLKID_PWM_B_GATE] = &s4_pwm_b_gate.hw, + [CLKID_PWM_C_SEL] = &s4_pwm_c_mux.hw, + [CLKID_PWM_C_DIV] = &s4_pwm_c_div.hw, + [CLKID_PWM_C_GATE] = &s4_pwm_c_gate.hw, + [CLKID_PWM_D_SEL] = &s4_pwm_d_mux.hw, + [CLKID_PWM_D_DIV] = &s4_pwm_d_div.hw, + [CLKID_PWM_D_GATE] = &s4_pwm_d_gate.hw, + [CLKID_PWM_E_SEL] = &s4_pwm_e_mux.hw, + [CLKID_PWM_E_DIV] = &s4_pwm_e_div.hw, + [CLKID_PWM_E_GATE] = &s4_pwm_e_gate.hw, + [CLKID_PWM_F_SEL] = &s4_pwm_f_mux.hw, + [CLKID_PWM_F_DIV] = &s4_pwm_f_div.hw, + [CLKID_PWM_F_GATE] = &s4_pwm_f_gate.hw, + [CLKID_PWM_G_SEL] = &s4_pwm_g_mux.hw, + [CLKID_PWM_G_DIV] = &s4_pwm_g_div.hw, + [CLKID_PWM_G_GATE] = &s4_pwm_g_gate.hw, + [CLKID_PWM_H_SEL] = &s4_pwm_h_mux.hw, + [CLKID_PWM_H_DIV] = &s4_pwm_h_div.hw, + [CLKID_PWM_H_GATE] = &s4_pwm_h_gate.hw, + [CLKID_PWM_I_SEL] = &s4_pwm_i_mux.hw, + [CLKID_PWM_I_DIV] = &s4_pwm_i_div.hw, + [CLKID_PWM_I_GATE] = &s4_pwm_i_gate.hw, + [CLKID_PWM_J_SEL] = &s4_pwm_j_mux.hw, + [CLKID_PWM_J_DIV] = &s4_pwm_j_div.hw, + [CLKID_PWM_J_GATE] = &s4_pwm_j_gate.hw, + [CLKID_SARADC_SEL] = &s4_saradc_mux.hw, + [CLKID_SARADC_DIV] = &s4_saradc_div.hw, + [CLKID_SARADC_GATE] = &s4_saradc_gate.hw, + [CLKID_GEN_SEL] = &s4_gen_clk_sel.hw, + [CLKID_GEN_DIV] = &s4_gen_clk_div.hw, + [CLKID_GEN_GATE] = &s4_gen_clk.hw, + [CLKID_DDR] = &s4_ddr.hw, + [CLKID_DOS] = &s4_dos.hw, + [CLKID_ETHPHY] = &s4_ethphy.hw, + [CLKID_MALI_GATE] = &s4_mali.hw, + [CLKID_AOCPU] = &s4_aocpu.hw, + [CLKID_AUCPU] = &s4_aucpu.hw, + [CLKID_CEC] = &s4_cec.hw, + [CLKID_SD_EMMC_A] = &s4_sdemmca.hw, + [CLKID_SD_EMMC_B] = &s4_sdemmcb.hw, + [CLKID_NAND] = &s4_nand.hw, + [CLKID_SMARTCARD] = &s4_smartcard.hw, + [CLKID_ACODEC] = &s4_acodec.hw, + [CLKID_SPIFC] = &s4_spifc.hw, + [CLKID_MSR_CLK] = &s4_msr_clk.hw, + [CLKID_IR_CTRL] = &s4_ir_ctrl.hw, + [CLKID_AUDIO] = &s4_audio.hw, + [CLKID_ETH] = &s4_eth.hw, + [CLKID_UART_A] = &s4_uart_a.hw, + [CLKID_UART_B] = &s4_uart_b.hw, + [CLKID_UART_C] = &s4_uart_c.hw, + [CLKID_UART_D] = &s4_uart_d.hw, + [CLKID_UART_E] = &s4_uart_e.hw, + [CLKID_AIFIFO] = &s4_aififo.hw, + [CLKID_TS_DDR] = &s4_ts_ddr.hw, + [CLKID_TS_PLL] = &s4_ts_pll.hw, + [CLKID_G2D] = &s4_g2d.hw, + [CLKID_SPICC0] = &s4_spicc0.hw, + [CLKID_USB] = &s4_usb.hw, + [CLKID_I2C_M_A] = &s4_i2c_m_a.hw, + [CLKID_I2C_M_B] = &s4_i2c_m_b.hw, + [CLKID_I2C_M_C] = &s4_i2c_m_c.hw, + [CLKID_I2C_M_D] = &s4_i2c_m_d.hw, + [CLKID_I2C_M_E] = &s4_i2c_m_e.hw, + [CLKID_HDMITX_APB] = &s4_hdmitx_apb.hw, + [CLKID_I2C_S_A] = &s4_i2c_s_a.hw, + [CLKID_USB1_TO_DDR] = &s4_usb1_to_ddr.hw, + [CLKID_HDCP22] = &s4_hdcp22.hw, + [CLKID_MMC_APB] = &s4_mmc_apb.hw, + [CLKID_RSA] = &s4_rsa.hw, + [CLKID_CPU_DEBUG] = &s4_cpu_debug.hw, + [CLKID_VPU_INTR] = &s4_vpu_intr.hw, + [CLKID_DEMOD] = &s4_demod.hw, + [CLKID_SAR_ADC] = &s4_sar_adc.hw, + [CLKID_GIC] = &s4_gic.hw, + [CLKID_PWM_AB] = &s4_pwm_ab.hw, + [CLKID_PWM_CD] = &s4_pwm_cd.hw, + [CLKID_PWM_EF] = &s4_pwm_ef.hw, + [CLKID_PWM_GH] = &s4_pwm_gh.hw, + [CLKID_PWM_IJ] = &s4_pwm_ij.hw, + [CLKID_HDCP22_ESMCLK_SEL] = &s4_hdcp22_esmclk_mux.hw, + [CLKID_HDCP22_ESMCLK_DIV] = &s4_hdcp22_esmclk_div.hw, + [CLKID_HDCP22_ESMCLK_GATE] = &s4_hdcp22_esmclk_gate.hw, + [CLKID_HDCP22_SKPCLK_SEL] = &s4_hdcp22_skpclk_mux.hw, + [CLKID_HDCP22_SKPCLK_DIV] = &s4_hdcp22_skpclk_div.hw, + [CLKID_HDCP22_SKPCLK_GATE] = &s4_hdcp22_skpclk_gate.hw, + [NR_CLKS] = NULL + }, + .num = NR_CLKS, +}; + +/* Convenience table to populate regmap in .probe */ +static struct clk_regmap *const s4_periphs_clk_regmaps[] = { + &s4_rtc_32k_by_oscin_clkin, + &s4_rtc_32k_by_oscin_div, + &s4_rtc_32k_by_oscin_sel, + &s4_rtc_32k_by_oscin, + &s4_rtc_clk, + &s4_sysclk_b_sel, + &s4_sysclk_b_div, + &s4_sysclk_b, + &s4_sysclk_a_sel, + &s4_sysclk_a_div, + &s4_sysclk_a, + &s4_sys_clk, + &s4_ceca_32k_clkin, + &s4_ceca_32k_div, + &s4_ceca_32k_sel_pre, + &s4_ceca_32k_sel, + &s4_ceca_32k_clkout, + &s4_cecb_32k_clkin, + &s4_cecb_32k_div, + &s4_cecb_32k_sel_pre, + &s4_cecb_32k_sel, + &s4_cecb_32k_clkout, + &s4_sc_clk_mux, + &s4_sc_clk_div, + &s4_sc_clk_gate, + &s4_12_24M_clk_gate, + &s4_12_24M_clk, + &s4_vid_pll_div, + &s4_vid_pll_sel, + &s4_vid_pll, + &s4_vclk_sel, + &s4_vclk2_sel, + &s4_vclk_input, + &s4_vclk2_input, + &s4_vclk_div, + &s4_vclk2_div, + &s4_vclk, + &s4_vclk2, + &s4_vclk_div1, + &s4_vclk_div2_en, + &s4_vclk_div4_en, + &s4_vclk_div6_en, + &s4_vclk_div12_en, + &s4_vclk2_div1, + &s4_vclk2_div2_en, + &s4_vclk2_div4_en, + &s4_vclk2_div6_en, + &s4_vclk2_div12_en, + &s4_cts_enci_sel, + &s4_cts_encp_sel, + &s4_cts_vdac_sel, + &s4_hdmi_tx_sel, + &s4_cts_enci, + &s4_cts_encp, + &s4_cts_vdac, + &s4_hdmi_tx, + &s4_hdmi_sel, + &s4_hdmi_div, + &s4_hdmi, + &s4_ts_clk_div, + &s4_ts_clk_gate, + &s4_mali_0_sel, + &s4_mali_0_div, + &s4_mali_0, + &s4_mali_1_sel, + &s4_mali_1_div, + &s4_mali_1, + &s4_mali_mux, + &s4_vdec_p0_mux, + &s4_vdec_p0_div, + &s4_vdec_p0, + &s4_vdec_p1_mux, + &s4_vdec_p1_div, + &s4_vdec_p1, + &s4_vdec_mux, + &s4_hevcf_p0_mux, + &s4_hevcf_p0_div, + &s4_hevcf_p0, + &s4_hevcf_p1_mux, + &s4_hevcf_p1_div, + &s4_hevcf_p1, + &s4_hevcf_mux, + &s4_vpu_0_sel, + &s4_vpu_0_div, + &s4_vpu_0, + &s4_vpu_1_sel, + &s4_vpu_1_div, + &s4_vpu_1, + &s4_vpu, + &s4_vpu_clkb_tmp_mux, + &s4_vpu_clkb_tmp_div, + &s4_vpu_clkb_tmp, + &s4_vpu_clkb_div, + &s4_vpu_clkb, + &s4_vpu_clkc_p0_mux, + &s4_vpu_clkc_p0_div, + &s4_vpu_clkc_p0, + &s4_vpu_clkc_p1_mux, + &s4_vpu_clkc_p1_div, + &s4_vpu_clkc_p1, + &s4_vpu_clkc_mux, + &s4_vapb_0_sel, + &s4_vapb_0_div, + &s4_vapb_0, + &s4_vapb_1_sel, + &s4_vapb_1_div, + &s4_vapb_1, + &s4_vapb, + &s4_ge2d_gate, + &s4_hdcp22_esmclk_mux, + &s4_hdcp22_esmclk_div, + &s4_hdcp22_esmclk_gate, + &s4_hdcp22_skpclk_mux, + &s4_hdcp22_skpclk_div, + &s4_hdcp22_skpclk_gate, + &s4_vdin_meas_mux, + &s4_vdin_meas_div, + &s4_vdin_meas_gate, + &s4_sd_emmc_c_clk0_sel, + &s4_sd_emmc_c_clk0_div, + &s4_sd_emmc_c_clk0, + &s4_sd_emmc_a_clk0_sel, + &s4_sd_emmc_a_clk0_div, + &s4_sd_emmc_a_clk0, + &s4_sd_emmc_b_clk0_sel, + &s4_sd_emmc_b_clk0_div, + &s4_sd_emmc_b_clk0, + &s4_spicc0_mux, + &s4_spicc0_div, + &s4_spicc0_gate, + &s4_pwm_a_mux, + &s4_pwm_a_div, + &s4_pwm_a_gate, + &s4_pwm_b_mux, + &s4_pwm_b_div, + &s4_pwm_b_gate, + &s4_pwm_c_mux, + &s4_pwm_c_div, + &s4_pwm_c_gate, + &s4_pwm_d_mux, + &s4_pwm_d_div, + &s4_pwm_d_gate, + &s4_pwm_e_mux, + &s4_pwm_e_div, + &s4_pwm_e_gate, + &s4_pwm_f_mux, + &s4_pwm_f_div, + &s4_pwm_f_gate, + &s4_pwm_g_mux, + &s4_pwm_g_div, + &s4_pwm_g_gate, + &s4_pwm_h_mux, + &s4_pwm_h_div, + &s4_pwm_h_gate, + &s4_pwm_i_mux, + &s4_pwm_i_div, + &s4_pwm_i_gate, + &s4_pwm_j_mux, + &s4_pwm_j_div, + &s4_pwm_j_gate, + &s4_saradc_mux, + &s4_saradc_div, + &s4_saradc_gate, + &s4_gen_clk_sel, + &s4_gen_clk_div, + &s4_gen_clk, + &s4_ddr, + &s4_dos, + &s4_ethphy, + &s4_mali, + &s4_aocpu, + &s4_aucpu, + &s4_cec, + &s4_sdemmca, + &s4_sdemmcb, + &s4_nand, + &s4_smartcard, + &s4_acodec, + &s4_spifc, + &s4_msr_clk, + &s4_ir_ctrl, + &s4_audio, + &s4_eth, + &s4_uart_a, + &s4_uart_b, + &s4_uart_c, + &s4_uart_d, + &s4_uart_e, + &s4_aififo, + &s4_ts_ddr, + &s4_ts_pll, + &s4_g2d, + &s4_spicc0, + &s4_usb, + &s4_i2c_m_a, + &s4_i2c_m_b, + &s4_i2c_m_c, + &s4_i2c_m_d, + &s4_i2c_m_e, + &s4_hdmitx_apb, + &s4_i2c_s_a, + &s4_usb1_to_ddr, + &s4_hdcp22, + &s4_mmc_apb, + &s4_rsa, + &s4_cpu_debug, + &s4_vpu_intr, + &s4_demod, + &s4_sar_adc, + &s4_gic, + &s4_pwm_ab, + &s4_pwm_cd, + &s4_pwm_ef, + &s4_pwm_gh, + &s4_pwm_ij, + &s4_demod_core_clk_mux, + &s4_demod_core_clk_div, + &s4_demod_core_clk_gate, + &s4_adc_extclk_in_mux, + &s4_adc_extclk_in_div, + &s4_adc_extclk_in_gate, +}; + +static struct regmap_config clkc_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static int meson_s4_periphs_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct regmap *regmap; + void __iomem *base; + int ret, i; + + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) + return PTR_ERR(base); + + regmap = devm_regmap_init_mmio(dev, base, &clkc_regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + /* Populate regmap for the regmap backed clocks */ + for (i = 0; i < ARRAY_SIZE(s4_periphs_clk_regmaps); i++) + s4_periphs_clk_regmaps[i]->map = regmap; + + for (i = 0; i < s4_periphs_hw_onecell_data.num; i++) { + /* array might be sparse */ + if (!s4_periphs_hw_onecell_data.hws[i]) + continue; + + ret = devm_clk_hw_register(dev, s4_periphs_hw_onecell_data.hws[i]); + if (ret) { + dev_err(dev, "Clock registration failed\n"); + return ret; + } + } + + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, + &s4_periphs_hw_onecell_data); +} + +static const struct of_device_id clkc_match_table[] = { + { + .compatible = "amlogic,s4-peripherals-clkc", + }, + {} +}; + +static struct platform_driver s4_driver = { + .probe = meson_s4_periphs_probe, + .driver = { + .name = "s4-periphs-clkc", + .of_match_table = clkc_match_table, + }, +}; + +module_platform_driver(s4_driver); +MODULE_LICENSE("GPL"); diff --git a/drivers/clk/meson/s4-peripherals.h b/drivers/clk/meson/s4-peripherals.h new file mode 100644 index 000000000000..13ef07bada83 --- /dev/null +++ b/drivers/clk/meson/s4-peripherals.h @@ -0,0 +1,218 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright (c) 2021 Amlogic, inc. + * Author: Yu Tu <yu.tu@amlogic.com> + */ + +#ifndef __MESON_S4_PERIPHERALS_H__ +#define __MESON_S4_PERIPHERALS_H__ + +/* + * Clock controller register offsets + * REG_BASE: REGISTER_BASE_ADDR = 0xfe000000 + */ +#define CLKCTRL_OSCIN_CTRL 0x004 +#define CLKCTRL_RTC_BY_OSCIN_CTRL0 0x008 +#define CLKCTRL_RTC_BY_OSCIN_CTRL1 0x00c +#define CLKCTRL_RTC_CTRL 0x010 +#define CLKCTRL_CHECK_CLK_RESULT 0x014 +#define CLKCTRL_MBIST_ATSPEED_CTRL 0x018 +#define CLKCTRL_LOCK_BIT_REG0 0x020 +#define CLKCTRL_LOCK_BIT_REG1 0x024 +#define CLKCTRL_LOCK_BIT_REG2 0x028 +#define CLKCTRL_LOCK_BIT_REG3 0x02c +#define CLKCTRL_PROT_BIT_REG0 0x030 +#define CLKCTRL_PROT_BIT_REG1 0x034 +#define CLKCTRL_PROT_BIT_REG2 0x038 +#define CLKCTRL_PROT_BIT_REG3 0x03c +#define CLKCTRL_SYS_CLK_CTRL0 0x040 +#define CLKCTRL_SYS_CLK_EN0_REG0 0x044 +#define CLKCTRL_SYS_CLK_EN0_REG1 0x048 +#define CLKCTRL_SYS_CLK_EN0_REG2 0x04c +#define CLKCTRL_SYS_CLK_EN0_REG3 0x050 +#define CLKCTRL_SYS_CLK_EN1_REG0 0x054 +#define CLKCTRL_SYS_CLK_EN1_REG1 0x058 +#define CLKCTRL_SYS_CLK_EN1_REG2 0x05c +#define CLKCTRL_SYS_CLK_EN1_REG3 0x060 +#define CLKCTRL_SYS_CLK_VPU_EN0 0x064 +#define CLKCTRL_SYS_CLK_VPU_EN1 0x068 +#define CLKCTRL_AXI_CLK_CTRL0 0x06c +#define CLKCTRL_TST_CTRL0 0x080 +#define CLKCTRL_TST_CTRL1 0x084 +#define CLKCTRL_CECA_CTRL0 0x088 +#define CLKCTRL_CECA_CTRL1 0x08c +#define CLKCTRL_CECB_CTRL0 0x090 +#define CLKCTRL_CECB_CTRL1 0x094 +#define CLKCTRL_SC_CLK_CTRL 0x098 +#define CLKCTRL_RAMA_CLK_CTRL0 0x0a4 +#define CLKCTRL_CLK12_24_CTRL 0x0a8 +#define CLKCTRL_VID_CLK_CTRL 0x0c0 +#define CLKCTRL_VID_CLK_CTRL2 0x0c4 +#define CLKCTRL_VID_CLK_DIV 0x0c8 +#define CLKCTRL_VIID_CLK_DIV 0x0cc +#define CLKCTRL_VIID_CLK_CTRL 0x0d0 +#define CLKCTRL_HDMI_CLK_CTRL 0x0e0 +#define CLKCTRL_VID_PLL_CLK_DIV 0x0e4 +#define CLKCTRL_VPU_CLK_CTRL 0x0e8 +#define CLKCTRL_VPU_CLKB_CTRL 0x0ec +#define CLKCTRL_VPU_CLKC_CTRL 0x0f0 +#define CLKCTRL_VID_LOCK_CLK_CTRL 0x0f4 +#define CLKCTRL_VDIN_MEAS_CLK_CTRL 0x0f8 +#define CLKCTRL_VAPBCLK_CTRL 0x0fc +#define CLKCTRL_HDCP22_CTRL 0x100 +#define CLKCTRL_CDAC_CLK_CTRL 0x108 +#define CLKCTRL_VDEC_CLK_CTRL 0x140 +#define CLKCTRL_VDEC2_CLK_CTRL 0x144 +#define CLKCTRL_VDEC3_CLK_CTRL 0x148 +#define CLKCTRL_VDEC4_CLK_CTRL 0x14c +#define CLKCTRL_TS_CLK_CTRL 0x158 +#define CLKCTRL_MALI_CLK_CTRL 0x15c +#define CLKCTRL_ETH_CLK_CTRL 0x164 +#define CLKCTRL_NAND_CLK_CTRL 0x168 +#define CLKCTRL_SD_EMMC_CLK_CTRL 0x16c +#define CLKCTRL_SPICC_CLK_CTRL 0x174 +#define CLKCTRL_GEN_CLK_CTRL 0x178 +#define CLKCTRL_SAR_CLK_CTRL 0x17c +#define CLKCTRL_PWM_CLK_AB_CTRL 0x180 +#define CLKCTRL_PWM_CLK_CD_CTRL 0x184 +#define CLKCTRL_PWM_CLK_EF_CTRL 0x188 +#define CLKCTRL_PWM_CLK_GH_CTRL 0x18c +#define CLKCTRL_PWM_CLK_IJ_CTRL 0x190 +#define CLKCTRL_DEMOD_CLK_CTRL 0x200 +#define CLKCTRL_TIMESTAMP_CTRL 0x400 +#define CLKCTRL_TIMESTAMP_CTRL1 0x404 +#define CLKCTRL_TIMESTAMP_CTRL2 0x40c +#define CLKCTRL_TIMESTAMP_RD0 0x410 +#define CLKCTRL_TIMESTAMP_RD1 0x414 +#define CLKCTRL_TIMEBASE_CTRL0 0x418 +#define CLKCTRL_TIMEBASE_CTRL1 0x41c +#define CLKCTRL_EFUSE_CPU_CFG01 0x480 +#define CLKCTRL_EFUSE_CPU_CFG2 0x484 +#define CLKCTRL_EFUSE_ENCP_CFG0 0x488 +#define CLKCTRL_EFUSE_MALI_CFG01 0x48c +#define CLKCTRL_EFUSE_LOCK 0x498 + +/* + * CLKID index values + * + * These indices are entirely contrived and do not map onto the hardware. + * It has now been decided to expose everything by default in the DT header: + * include/dt-bindings/clock/axg-clkc.h. Only the clocks ids we don't want + * to expose, such as the internal muxes and dividers of composite clocks, + * will remain defined here. + */ +#define CLKID_RTC_32K_CLKIN 0 +#define CLKID_RTC_32K_DIV 1 +#define CLKID_RTC_32K_SEL 2 +#define CLKID_RTC_32K_XATL 3 +#define CLKID_SYS_CLK_B_SEL 5 +#define CLKID_SYS_CLK_B_DIV 6 +#define CLKID_SYS_CLK_A_SEL 8 +#define CLKID_SYS_CLK_A_DIV 9 +#define CLKID_CECA_32K_CLKIN 12 +#define CLKID_CECA_32K_DIV 13 +#define CLKID_CECA_32K_SEL_PRE 14 +#define CLKID_CECA_32K_SEL 15 +#define CLKID_CECB_32K_CLKIN 17 +#define CLKID_CECB_32K_DIV 18 +#define CLKID_CECB_32K_SEL_PRE 19 +#define CLKID_CECB_32K_SEL 20 +#define CLKID_SC_CLK_SEL 22 +#define CLKID_SC_CLK_DIV 23 +#define CLKID_12_24M_CLK_GATE 25 +#define CLKID_12M_CLK_DIV 26 +#define CLKID_VID_PLL_DIV 28 +#define CLKID_VID_PLL_SEL 29 +#define CLKID_VCLK_SEL 31 +#define CLKID_VCLK2_SEL 32 +#define CLKID_VCLK_INPUT 33 +#define CLKID_VCLK2_INPUT 34 +#define CLKID_VCLK_DIV 35 +#define CLKID_VCLK2_DIV 36 +#define CLKID_VCLK_DIV2_EN 40 +#define CLKID_VCLK_DIV4_EN 41 +#define CLKID_VCLK_DIV6_EN 42 +#define CLKID_VCLK_DIV12_EN 43 +#define CLKID_VCLK2_DIV2_EN 45 +#define CLKID_VCLK2_DIV4_EN 46 +#define CLKID_VCLK2_DIV6_EN 47 +#define CLKID_VCLK2_DIV12_EN 48 +#define CLKID_CTS_ENCI_SEL 57 +#define CLKID_CTS_ENCP_SEL 58 +#define CLKID_CTS_VDAC_SEL 59 +#define CLKID_HDMI_TX_SEL 60 +#define CLKID_HDMI_TX 64 +#define CLKID_HDMI_SEL 65 +#define CLKID_HDMI_DIV 66 +#define CLKID_TS_CLK_DIV 68 +#define CLKID_MALI_0_SEL 70 +#define CLKID_MALI_0_DIV 71 +#define CLKID_MALI_1_SEL 73 +#define CLKID_MALI_1_DIV 74 +#define CLKID_VDEC_P0_SEL 77 +#define CLKID_VDEC_P0_DIV 78 +#define CLKID_VDEC_P1_SEL 80 +#define CLKID_VDEC_P1_DIV 81 +#define CLKID_HEVCF_P0_SEL 84 +#define CLKID_HEVCF_P0_DIV 85 +#define CLKID_HEVCF_P1_SEL 87 +#define CLKID_HEVCF_P1_DIV 88 +#define CLKID_VPU_0_SEL 91 +#define CLKID_VPU_0_DIV 92 +#define CLKID_VPU_1_SEL 94 +#define CLKID_VPU_1_DIV 95 +#define CLKID_VPU_CLKB_TMP_SEL 98 +#define CLKID_VPU_CLKB_TMP_DIV 99 +#define CLKID_VPU_CLKB_DIV 101 +#define CLKID_VPU_CLKC_P0_SEL 103 +#define CLKID_VPU_CLKC_P0_DIV 104 +#define CLKID_VPU_CLKC_P1_SEL 106 +#define CLKID_VPU_CLKC_P1_DIV 107 +#define CLKID_VAPB_0_SEL 110 +#define CLKID_VAPB_0_DIV 111 +#define CLKID_VAPB_1_SEL 113 +#define CLKID_VAPB_1_DIV 114 +#define CLKID_VDIN_MEAS_SEL 118 +#define CLKID_VDIN_MEAS_DIV 119 +#define CLKID_SD_EMMC_C_CLK_SEL 121 +#define CLKID_SD_EMMC_C_CLK_DIV 122 +#define CLKID_SD_EMMC_A_CLK_SEL 124 +#define CLKID_SD_EMMC_A_CLK_DIV 125 +#define CLKID_SD_EMMC_B_CLK_SEL 127 +#define CLKID_SD_EMMC_B_CLK_DIV 128 +#define CLKID_SPICC0_SEL 130 +#define CLKID_SPICC0_DIV 131 +#define CLKID_PWM_A_SEL 133 +#define CLKID_PWM_A_DIV 134 +#define CLKID_PWM_B_SEL 136 +#define CLKID_PWM_B_DIV 137 +#define CLKID_PWM_C_SEL 139 +#define CLKID_PWM_C_DIV 140 +#define CLKID_PWM_D_SEL 142 +#define CLKID_PWM_D_DIV 143 +#define CLKID_PWM_E_SEL 145 +#define CLKID_PWM_E_DIV 146 +#define CLKID_PWM_F_SEL 148 +#define CLKID_PWM_F_DIV 149 +#define CLKID_PWM_G_SEL 151 +#define CLKID_PWM_G_DIV 152 +#define CLKID_PWM_H_SEL 154 +#define CLKID_PWM_H_DIV 155 +#define CLKID_PWM_I_SEL 157 +#define CLKID_PWM_I_DIV 158 +#define CLKID_PWM_J_SEL 160 +#define CLKID_PWM_J_DIV 161 +#define CLKID_SARADC_SEL 163 +#define CLKID_SARADC_DIV 164 +#define CLKID_GEN_SEL 166 +#define CLKID_GEN_DIV 167 +#define CLKID_HDCP22_ESMCLK_SEL 219 +#define CLKID_HDCP22_ESMCLK_DIV 220 +#define CLKID_HDCP22_SKPCLK_SEL 222 +#define CLKID_HDCP22_SKPCLK_DIV 223 + +#define NR_CLKS 225 +/* include the CLKIDs that have been made part of the DT binding */ +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> + +#endif /* __MESON_S4_PERIPHERALS_H__ */ diff --git a/include/dt-bindings/clock/amlogic,s4-peripherals-clkc.h b/include/dt-bindings/clock/amlogic,s4-peripherals-clkc.h new file mode 100644 index 000000000000..bbec5094d5c3 --- /dev/null +++ b/include/dt-bindings/clock/amlogic,s4-peripherals-clkc.h @@ -0,0 +1,131 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. + * Author: Yu Tu <yu.tu@amlogic.com> + */ + +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PERIPHERALS_CLKC_H +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PERIPHERALS_CLKC_H + +/* + * CLKID index values + */ + +#define CLKID_RTC_CLK 4 +#define CLKID_SYS_CLK_B_GATE 7 +#define CLKID_SYS_CLK_A_GATE 10 +#define CLKID_SYS_CLK 11 +#define CLKID_CECA_32K_CLKOUT 16 +#define CLKID_CECB_32K_CLKOUT 21 +#define CLKID_SC_CLK_GATE 24 +#define CLKID_12_24M_CLK_SEL 27 +#define CLKID_VID_PLL 30 +#define CLKID_VCLK 37 +#define CLKID_VCLK2 38 +#define CLKID_VCLK_DIV1 39 +#define CLKID_VCLK2_DIV1 44 +#define CLKID_VCLK_DIV2 49 +#define CLKID_VCLK_DIV4 50 +#define CLKID_VCLK_DIV6 51 +#define CLKID_VCLK_DIV12 52 +#define CLKID_VCLK2_DIV2 53 +#define CLKID_VCLK2_DIV4 54 +#define CLKID_VCLK2_DIV6 55 +#define CLKID_VCLK2_DIV12 56 +#define CLKID_CTS_ENCI 61 +#define CLKID_CTS_ENCP 62 +#define CLKID_CTS_VDAC 63 +#define CLKID_HDMI 67 +#define CLKID_TS_CLK_GATE 69 +#define CLKID_MALI_0 72 +#define CLKID_MALI_1 75 +#define CLKID_MALI 76 +#define CLKID_VDEC_P0 79 +#define CLKID_VDEC_P1 82 +#define CLKID_VDEC_SEL 83 +#define CLKID_HEVCF_P0 86 +#define CLKID_HEVCF_P1 89 +#define CLKID_HEVCF_SEL 90 +#define CLKID_VPU_0 93 +#define CLKID_VPU_1 96 +#define CLKID_VPU 97 +#define CLKID_VPU_CLKB_TMP 100 +#define CLKID_VPU_CLKB 102 +#define CLKID_VPU_CLKC_P0 105 +#define CLKID_VPU_CLKC_P1 108 +#define CLKID_VPU_CLKC_SEL 109 +#define CLKID_VAPB_0 112 +#define CLKID_VAPB_1 115 +#define CLKID_VAPB 116 +#define CLKID_GE2D 117 +#define CLKID_VDIN_MEAS_GATE 120 +#define CLKID_SD_EMMC_C_CLK 123 +#define CLKID_SD_EMMC_A_CLK 126 +#define CLKID_SD_EMMC_B_CLK 129 +#define CLKID_SPICC0_GATE 132 +#define CLKID_PWM_A_GATE 135 +#define CLKID_PWM_B_GATE 138 +#define CLKID_PWM_C_GATE 141 +#define CLKID_PWM_D_GATE 144 +#define CLKID_PWM_E_GATE 147 +#define CLKID_PWM_F_GATE 150 +#define CLKID_PWM_G_GATE 153 +#define CLKID_PWM_H_GATE 156 +#define CLKID_PWM_I_GATE 159 +#define CLKID_PWM_J_GATE 162 +#define CLKID_SARADC_GATE 165 +#define CLKID_GEN_GATE 168 +#define CLKID_DDR 169 +#define CLKID_DOS 170 +#define CLKID_ETHPHY 171 +#define CLKID_MALI_GATE 172 +#define CLKID_AOCPU 173 +#define CLKID_AUCPU 174 +#define CLKID_CEC 175 +#define CLKID_SD_EMMC_A 176 +#define CLKID_SD_EMMC_B 177 +#define CLKID_NAND 178 +#define CLKID_SMARTCARD 179 +#define CLKID_ACODEC 180 +#define CLKID_SPIFC 181 +#define CLKID_MSR_CLK 182 +#define CLKID_IR_CTRL 183 +#define CLKID_AUDIO 184 +#define CLKID_ETH 185 +#define CLKID_UART_A 186 +#define CLKID_UART_B 187 +#define CLKID_UART_C 188 +#define CLKID_UART_D 189 +#define CLKID_UART_E 190 +#define CLKID_AIFIFO 191 +#define CLKID_TS_DDR 192 +#define CLKID_TS_PLL 193 +#define CLKID_G2D 194 +#define CLKID_SPICC0 195 +#define CLKID_SPICC1 196 +#define CLKID_USB 197 +#define CLKID_I2C_M_A 198 +#define CLKID_I2C_M_B 199 +#define CLKID_I2C_M_C 200 +#define CLKID_I2C_M_D 201 +#define CLKID_I2C_M_E 202 +#define CLKID_HDMITX_APB 203 +#define CLKID_I2C_S_A 204 +#define CLKID_USB1_TO_DDR 205 +#define CLKID_HDCP22 206 +#define CLKID_MMC_APB 207 +#define CLKID_RSA 208 +#define CLKID_CPU_DEBUG 209 +#define CLKID_VPU_INTR 210 +#define CLKID_DEMOD 211 +#define CLKID_SAR_ADC 212 +#define CLKID_GIC 213 +#define CLKID_PWM_AB 214 +#define CLKID_PWM_CD 215 +#define CLKID_PWM_EF 216 +#define CLKID_PWM_GH 217 +#define CLKID_PWM_IJ 218 +#define CLKID_HDCP22_ESMCLK_GATE 221 +#define CLKID_HDCP22_SKPCLK_GATE 224 + +#endif /* _DT_BINDINGS_CLOCK_AMLOGIC_S4_PERIPHERALS_CLKC_H */ -- 2.33.1 ^ permalink raw reply related [flat|nested] 109+ messages in thread
* [PATCH V5 3/4] clk: meson: s4: add s4 SoC peripheral clock controller driver and bindings @ 2022-11-23 2:13 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 2:13 UTC (permalink / raw) To: linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang, Yu Tu Add the peripherals clock controller found and bindings in the s4 SoC family. Signed-off-by: Yu Tu <yu.tu@amlogic.com> --- .../clock/amlogic,s4-peripherals-clkc.yaml | 105 + drivers/clk/meson/Kconfig | 12 + drivers/clk/meson/Makefile | 1 + drivers/clk/meson/s4-peripherals.c | 3783 +++++++++++++++++ drivers/clk/meson/s4-peripherals.h | 218 + .../clock/amlogic,s4-peripherals-clkc.h | 131 + 6 files changed, 4250 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml create mode 100644 drivers/clk/meson/s4-peripherals.c create mode 100644 drivers/clk/meson/s4-peripherals.h create mode 100644 include/dt-bindings/clock/amlogic,s4-peripherals-clkc.h diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml new file mode 100644 index 000000000000..d1ea05ab7ec9 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/amlogic,s4-peripherals-clkc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson S serials Peripherals Clock Controller + +maintainers: + - Neil Armstrong <narmstrong@baylibre.com> + - Jerome Brunet <jbrunet@baylibre.com> + - Yu Tu <yu.hu@amlogic.com> + + +properties: + compatible: + const: amlogic,s4-peripherals-clkc + + reg: + maxItems: 1 + + clocks: + items: + - description: input fixed pll div2 + - description: input fixed pll div2p5 + - description: input fixed pll div3 + - description: input fixed pll div4 + - description: input fixed pll div5 + - description: input fixed pll div7 + - description: input hifi pll + - description: input gp0 pll + - description: input mpll0 + - description: input mpll1 + - description: input mpll2 + - description: input mpll3 + - description: input hdmi pll + - description: input oscillator (usually at 24MHz) + - description: input external 32kHz reference (optional) + + clock-names: + items: + - const: fclk_div2 + - const: fclk_div2p5 + - const: fclk_div3 + - const: fclk_div4 + - const: fclk_div5 + - const: fclk_div7 + - const: hifi_pll + - const: gp0_pll + - const: mpll0 + - const: mpll1 + - const: mpll2 + - const: mpll3 + - const: hdmi_pll + - const: xtal + - const: ext_32k + + "#clock-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> + + /* 32KHz reference crystal */ + ext_32k: ref32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32000>; + }; + + clkc_periphs: clock-controller@fe000000 { + compatible = "amlogic,s4-peripherals-clkc"; + reg = <0xfe000000 0x49c>; + clocks = <&clkc_pll 3>, + <&clkc_pll 13>, + <&clkc_pll 5>, + <&clkc_pll 7>, + <&clkc_pll 9>, + <&clkc_pll 11>, + <&clkc_pll 17>, + <&clkc_pll 15>, + <&clkc_pll 25>, + <&clkc_pll 27>, + <&clkc_pll 29>, + <&clkc_pll 31>, + <&clkc_pll 20>, + <&xtal>, + <&ext_32k>; + clock-names = "fclk_div2", "fclk_div2p5", "fclk_div3", "fclk_div4", + "fclk_div5", "fclk_div7", "hifi_pll", "gp0_pll", + "mpll0", "mpll1", "mpll2", "mpll3", "hdmi_pll", "xtal", + "ext_32k"; + #clock-cells = <1>; + }; +... diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig index a663c90a3f3b..a6eb9fa15c74 100644 --- a/drivers/clk/meson/Kconfig +++ b/drivers/clk/meson/Kconfig @@ -128,4 +128,16 @@ config COMMON_CLK_S4_PLL aka s4. Amlogic S805X2 and S905Y4 devices include AQ222 and AQ229. Say Y if you want the board to work, because plls are the parent of most peripherals. + +config COMMON_CLK_S4 + tristate "S4 SoC Peripherals clock controllers support" + depends on ARM64 + default y + select COMMON_CLK_MESON_REGMAP + select COMMON_CLK_MESON_DUALDIV + select COMMON_CLK_MESON_VID_PLL_DIV + help + Support for the Peripherals clock controller on Amlogic S805X2 and S905Y4 + devices, aka s4. Amlogic S805X2 and S905Y4 devices include AQ222 and AQ229. + Say Y if you want peripherals to work. endmenu diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile index 376f49cc13f1..c9130afccb48 100644 --- a/drivers/clk/meson/Makefile +++ b/drivers/clk/meson/Makefile @@ -20,3 +20,4 @@ obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o obj-$(CONFIG_COMMON_CLK_S4_PLL) += s4-pll.o +obj-$(CONFIG_COMMON_CLK_S4) += s4-peripherals.o diff --git a/drivers/clk/meson/s4-peripherals.c b/drivers/clk/meson/s4-peripherals.c new file mode 100644 index 000000000000..8ce5156d3510 --- /dev/null +++ b/drivers/clk/meson/s4-peripherals.c @@ -0,0 +1,3783 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Amlogic Meson-S4 Peripherals Clock Controller Driver + * + * Copyright (c) 2021 Amlogic, inc. + * Author: Yu Tu <yu.tu@amlogic.com> + */ + +#include <linux/clk-provider.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> + +#include "clk-regmap.h" +#include "vid-pll-div.h" +#include "clk-dualdiv.h" +#include "s4-peripherals.h" + +static struct clk_regmap s4_rtc_32k_by_oscin_clkin = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_RTC_BY_OSCIN_CTRL0, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data) { + .name = "rtc_32k_by_oscin_clkin", + .ops = &clk_regmap_gate_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", } + }, + .num_parents = 1, + }, +}; + +static const struct meson_clk_dualdiv_param s4_32k_div_table[] = { + { + .dual = 1, + .n1 = 733, + .m1 = 8, + .n2 = 732, + .m2 = 11, + }, + {} +}; + +static struct clk_regmap s4_rtc_32k_by_oscin_div = { + .data = &(struct meson_clk_dualdiv_data){ + .n1 = { + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL0, + .shift = 0, + .width = 12, + }, + .n2 = { + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL0, + .shift = 12, + .width = 12, + }, + .m1 = { + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL1, + .shift = 0, + .width = 12, + }, + .m2 = { + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL1, + .shift = 12, + .width = 12, + }, + .dual = { + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL0, + .shift = 28, + .width = 1, + }, + .table = s4_32k_div_table, + }, + .hw.init = &(struct clk_init_data){ + .name = "rtc_32k_by_oscin_div", + .ops = &meson_clk_dualdiv_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_rtc_32k_by_oscin_clkin.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_rtc_32k_by_oscin_sel = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_RTC_BY_OSCIN_CTRL1, + .mask = 0x1, + .shift = 24, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "rtc_32k_by_oscin_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_rtc_32k_by_oscin_div.hw, + &s4_rtc_32k_by_oscin_clkin.hw, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_rtc_32k_by_oscin = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_RTC_BY_OSCIN_CTRL0, + .bit_idx = 30, + }, + .hw.init = &(struct clk_init_data) { + .name = "rtc_32k_by_oscin", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_rtc_32k_by_oscin_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* + * This RTC clock can be supplied by an external 32KHz crystal oscillator. + * If it is used, it should be documented in using fw_name and documented in the + * Bindings. Not currently in use on this board, so skip it. + */ +static u32 rtc_clk_sel[] = { 0, 1 }; +static const struct clk_parent_data rtc_clk_sel_parent_data[] = { + { .hw = &s4_rtc_32k_by_oscin.hw }, + { .hw = &s4_rtc_32k_by_oscin_div.hw }, + { .fw_name = "ext_32k", } +}; + +static struct clk_regmap s4_rtc_clk = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_RTC_CTRL, + .mask = 0x3, + .shift = 0, + .table = rtc_clk_sel, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "rtc_clk_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = rtc_clk_sel_parent_data, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* The index 5 is AXI_CLK, which is dedicated to AXI. So skip it. */ +static u32 mux_table_sys_ab_clk_sel[] = { 0, 1, 2, 3, 4, 6, 7 }; +static const struct clk_parent_data sys_ab_clk_parent_data[] = { + { .fw_name = "xtal" }, + { .fw_name = "fclk_div2" }, + { .fw_name = "fclk_div3" }, + { .fw_name = "fclk_div4" }, + { .fw_name = "fclk_div5" }, + { .fw_name = "fclk_div7" }, + { .hw = &s4_rtc_clk.hw } +}; + +static struct clk_regmap s4_sysclk_b_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_SYS_CLK_CTRL0, + .mask = 0x7, + .shift = 26, + .table = mux_table_sys_ab_clk_sel, + }, + .hw.init = &(struct clk_init_data){ + .name = "sysclk_b_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = sys_ab_clk_parent_data, + .num_parents = ARRAY_SIZE(sys_ab_clk_parent_data), + }, +}; + +static struct clk_regmap s4_sysclk_b_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_SYS_CLK_CTRL0, + .shift = 16, + .width = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "sysclk_b_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_sysclk_b_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_sysclk_b = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_SYS_CLK_CTRL0, + .bit_idx = 29, + }, + .hw.init = &(struct clk_init_data) { + .name = "sysclk_b", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_sysclk_b_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_sysclk_a_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_SYS_CLK_CTRL0, + .mask = 0x7, + .shift = 10, + .table = mux_table_sys_ab_clk_sel, + }, + .hw.init = &(struct clk_init_data){ + .name = "sysclk_a_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = sys_ab_clk_parent_data, + .num_parents = ARRAY_SIZE(sys_ab_clk_parent_data), + }, +}; + +static struct clk_regmap s4_sysclk_a_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_SYS_CLK_CTRL0, + .shift = 0, + .width = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "sysclk_a_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_sysclk_a_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_sysclk_a = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_SYS_CLK_CTRL0, + .bit_idx = 13, + }, + .hw.init = &(struct clk_init_data) { + .name = "sysclk_a", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_sysclk_a_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_sys_clk = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_SYS_CLK_CTRL0, + .mask = 0x1, + .shift = 31, + }, + .hw.init = &(struct clk_init_data){ + .name = "sys_clk", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_sysclk_a.hw, + &s4_sysclk_b.hw + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_ceca_32k_clkin = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_CECA_CTRL0, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data) { + .name = "ceca_32k_clkin", + .ops = &clk_regmap_gate_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", } + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_ceca_32k_div = { + .data = &(struct meson_clk_dualdiv_data){ + .n1 = { + .reg_off = CLKCTRL_CECA_CTRL0, + .shift = 0, + .width = 12, + }, + .n2 = { + .reg_off = CLKCTRL_CECA_CTRL0, + .shift = 12, + .width = 12, + }, + .m1 = { + .reg_off = CLKCTRL_CECA_CTRL1, + .shift = 0, + .width = 12, + }, + .m2 = { + .reg_off = CLKCTRL_CECA_CTRL1, + .shift = 12, + .width = 12, + }, + .dual = { + .reg_off = CLKCTRL_CECA_CTRL0, + .shift = 28, + .width = 1, + }, + .table = s4_32k_div_table, + }, + .hw.init = &(struct clk_init_data){ + .name = "ceca_32k_div", + .ops = &meson_clk_dualdiv_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_ceca_32k_clkin.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_ceca_32k_sel_pre = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_CECA_CTRL1, + .mask = 0x1, + .shift = 24, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "ceca_32k_sel_pre", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_ceca_32k_div.hw, + &s4_ceca_32k_clkin.hw + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_ceca_32k_sel = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_CECA_CTRL1, + .mask = 0x1, + .shift = 31, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "ceca_32k_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_ceca_32k_sel_pre.hw, + &s4_rtc_clk.hw + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_ceca_32k_clkout = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_CECA_CTRL0, + .bit_idx = 30, + }, + .hw.init = &(struct clk_init_data){ + .name = "ceca_32k_clkout", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_ceca_32k_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_cecb_32k_clkin = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_CECB_CTRL0, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data) { + .name = "cecb_32k_clkin", + .ops = &clk_regmap_gate_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", } + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_cecb_32k_div = { + .data = &(struct meson_clk_dualdiv_data){ + .n1 = { + .reg_off = CLKCTRL_CECB_CTRL0, + .shift = 0, + .width = 12, + }, + .n2 = { + .reg_off = CLKCTRL_CECB_CTRL0, + .shift = 12, + .width = 12, + }, + .m1 = { + .reg_off = CLKCTRL_CECB_CTRL1, + .shift = 0, + .width = 12, + }, + .m2 = { + .reg_off = CLKCTRL_CECB_CTRL1, + .shift = 12, + .width = 12, + }, + .dual = { + .reg_off = CLKCTRL_CECB_CTRL0, + .shift = 28, + .width = 1, + }, + .table = s4_32k_div_table, + }, + .hw.init = &(struct clk_init_data){ + .name = "cecb_32k_div", + .ops = &meson_clk_dualdiv_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_cecb_32k_clkin.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap s4_cecb_32k_sel_pre = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_CECB_CTRL1, + .mask = 0x1, + .shift = 24, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "cecb_32k_sel_pre", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_cecb_32k_div.hw, + &s4_cecb_32k_clkin.hw + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_cecb_32k_sel = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_CECB_CTRL1, + .mask = 0x1, + .shift = 31, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "cecb_32k_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_cecb_32k_sel_pre.hw, + &s4_rtc_clk.hw + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_cecb_32k_clkout = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_CECB_CTRL0, + .bit_idx = 30, + }, + .hw.init = &(struct clk_init_data){ + .name = "cecb_32k_clkout", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_cecb_32k_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_parent_data s4_sc_parent_data[] = { + { .fw_name = "fclk_div4" }, + { .fw_name = "fclk_div3" }, + { .fw_name = "fclk_div5" }, + { .fw_name = "xtal", } +}; + +static struct clk_regmap s4_sc_clk_mux = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_SC_CLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data) { + .name = "sc_clk_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_sc_parent_data, + .num_parents = ARRAY_SIZE(s4_sc_parent_data), + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_sc_clk_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_SC_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "sc_clk_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_sc_clk_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_sc_clk_gate = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_SC_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "sc_clk_gate", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_sc_clk_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_12_24M_clk_gate = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_CLK12_24_CTRL, + .bit_idx = 11, + }, + .hw.init = &(struct clk_init_data) { + .name = "12_24m_gate", + .ops = &clk_regmap_gate_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", } + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor s4_12M_clk_div = { + .mult = 1, + .div = 2, + .hw.init = &(struct clk_init_data){ + .name = "12M", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_12_24M_clk_gate.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_12_24M_clk = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_CLK12_24_CTRL, + .mask = 0x1, + .shift = 10, + }, + .hw.init = &(struct clk_init_data) { + .name = "12_24m", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_12_24M_clk_gate.hw, + &s4_12M_clk_div.hw, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* Video Clocks */ +static struct clk_regmap s4_vid_pll_div = { + .data = &(struct meson_vid_pll_div_data){ + .val = { + .reg_off = CLKCTRL_VID_PLL_CLK_DIV, + .shift = 0, + .width = 15, + }, + .sel = { + .reg_off = CLKCTRL_VID_PLL_CLK_DIV, + .shift = 16, + .width = 2, + }, + }, + .hw.init = &(struct clk_init_data) { + .name = "vid_pll_div", + /* Same to g12a */ + .ops = &meson_vid_pll_div_ro_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "hdmi_pll", } + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vid_pll_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VID_PLL_CLK_DIV, + .mask = 0x1, + .shift = 18, + }, + .hw.init = &(struct clk_init_data){ + .name = "vid_pll_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .hw = &s4_vid_pll_div.hw }, + { .fw_name = "hdmi_pll", } + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vid_pll = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VID_PLL_CLK_DIV, + .bit_idx = 19, + }, + .hw.init = &(struct clk_init_data) { + .name = "vid_pll", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vid_pll_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_parent_data s4_vclk_parent_data[] = { + { .hw = &s4_vid_pll.hw }, + { .fw_name = "gp0_pll", }, + { .fw_name = "hifi_pll", }, + { .fw_name = "mpll1", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div4", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "fclk_div7", }, +}; + +static struct clk_regmap s4_vclk_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VID_CLK_CTRL, + .mask = 0x7, + .shift = 16, + }, + .hw.init = &(struct clk_init_data){ + .name = "vclk_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_vclk_parent_data, + .num_parents = ARRAY_SIZE(s4_vclk_parent_data), + }, +}; + +static struct clk_regmap s4_vclk2_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VIID_CLK_CTRL, + .mask = 0x7, + .shift = 16, + }, + .hw.init = &(struct clk_init_data){ + .name = "vclk2_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_vclk_parent_data, + .num_parents = ARRAY_SIZE(s4_vclk_parent_data), + }, +}; + +static struct clk_regmap s4_vclk_input = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VID_CLK_DIV, + .bit_idx = 16, + }, + .hw.init = &(struct clk_init_data) { + .name = "vclk_input", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vclk_sel.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vclk2_input = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VIID_CLK_DIV, + .bit_idx = 16, + }, + .hw.init = &(struct clk_init_data) { + .name = "vclk2_input", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2_sel.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vclk_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_VID_CLK_DIV, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "vclk_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vclk_input.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vclk2_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_VIID_CLK_DIV, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "vclk2_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vclk2_input.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vclk = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VID_CLK_CTRL, + .bit_idx = 19, + }, + .hw.init = &(struct clk_init_data) { + .name = "vclk", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vclk_div.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vclk2 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VIID_CLK_CTRL, + .bit_idx = 19, + }, + .hw.init = &(struct clk_init_data) { + .name = "vclk2", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2_div.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vclk_div1 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VID_CLK_CTRL, + .bit_idx = 0, + }, + .hw.init = &(struct clk_init_data) { + .name = "vclk_div1", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vclk_div2_en = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VID_CLK_CTRL, + .bit_idx = 1, + }, + .hw.init = &(struct clk_init_data) { + .name = "vclk_div2_en", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vclk_div4_en = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VID_CLK_CTRL, + .bit_idx = 2, + }, + .hw.init = &(struct clk_init_data) { + .name = "vclk_div4_en", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vclk_div6_en = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VID_CLK_CTRL, + .bit_idx = 3, + }, + .hw.init = &(struct clk_init_data) { + .name = "vclk_div6_en", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vclk_div12_en = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VID_CLK_CTRL, + .bit_idx = 4, + }, + .hw.init = &(struct clk_init_data) { + .name = "vclk_div12_en", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vclk2_div1 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VIID_CLK_CTRL, + .bit_idx = 0, + }, + .hw.init = &(struct clk_init_data) { + .name = "vclk2_div1", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vclk2_div2_en = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VIID_CLK_CTRL, + .bit_idx = 1, + }, + .hw.init = &(struct clk_init_data) { + .name = "vclk2_div2_en", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vclk2_div4_en = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VIID_CLK_CTRL, + .bit_idx = 2, + }, + .hw.init = &(struct clk_init_data) { + .name = "vclk2_div4_en", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vclk2_div6_en = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VIID_CLK_CTRL, + .bit_idx = 3, + }, + .hw.init = &(struct clk_init_data) { + .name = "vclk2_div6_en", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vclk2_div12_en = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VIID_CLK_CTRL, + .bit_idx = 4, + }, + .hw.init = &(struct clk_init_data) { + .name = "vclk2_div12_en", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_fixed_factor s4_vclk_div2 = { + .mult = 1, + .div = 2, + .hw.init = &(struct clk_init_data){ + .name = "vclk_div2", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vclk_div2_en.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_fixed_factor s4_vclk_div4 = { + .mult = 1, + .div = 4, + .hw.init = &(struct clk_init_data){ + .name = "vclk_div4", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vclk_div4_en.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_fixed_factor s4_vclk_div6 = { + .mult = 1, + .div = 6, + .hw.init = &(struct clk_init_data){ + .name = "vclk_div6", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vclk_div6_en.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_fixed_factor s4_vclk_div12 = { + .mult = 1, + .div = 12, + .hw.init = &(struct clk_init_data){ + .name = "vclk_div12", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vclk_div12_en.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_fixed_factor s4_vclk2_div2 = { + .mult = 1, + .div = 2, + .hw.init = &(struct clk_init_data){ + .name = "vclk2_div2", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vclk2_div2_en.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_fixed_factor s4_vclk2_div4 = { + .mult = 1, + .div = 4, + .hw.init = &(struct clk_init_data){ + .name = "vclk2_div4", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vclk2_div4_en.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_fixed_factor s4_vclk2_div6 = { + .mult = 1, + .div = 6, + .hw.init = &(struct clk_init_data){ + .name = "vclk2_div6", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vclk2_div6_en.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_fixed_factor s4_vclk2_div12 = { + .mult = 1, + .div = 12, + .hw.init = &(struct clk_init_data){ + .name = "vclk2_div12", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vclk2_div12_en.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* The 5,6,7 indexes corresponds to no real clock, so there are not used. */ +static u32 mux_table_cts_sel[] = { 0, 1, 2, 3, 4, 8, 9, 10, 11, 12 }; +static const struct clk_hw *s4_cts_parent_hws[] = { + &s4_vclk_div1.hw, + &s4_vclk_div2.hw, + &s4_vclk_div4.hw, + &s4_vclk_div6.hw, + &s4_vclk_div12.hw, + &s4_vclk2_div1.hw, + &s4_vclk2_div2.hw, + &s4_vclk2_div4.hw, + &s4_vclk2_div6.hw, + &s4_vclk2_div12.hw +}; + +static struct clk_regmap s4_cts_enci_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VID_CLK_DIV, + .mask = 0xf, + .shift = 28, + .table = mux_table_cts_sel, + }, + .hw.init = &(struct clk_init_data){ + .name = "cts_enci_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = s4_cts_parent_hws, + .num_parents = ARRAY_SIZE(s4_cts_parent_hws), + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_cts_encp_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VID_CLK_DIV, + .mask = 0xf, + .shift = 20, + .table = mux_table_cts_sel, + }, + .hw.init = &(struct clk_init_data){ + .name = "cts_encp_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = s4_cts_parent_hws, + .num_parents = ARRAY_SIZE(s4_cts_parent_hws), + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_cts_vdac_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VIID_CLK_DIV, + .mask = 0xf, + .shift = 28, + .table = mux_table_cts_sel, + }, + .hw.init = &(struct clk_init_data){ + .name = "cts_vdac_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = s4_cts_parent_hws, + .num_parents = ARRAY_SIZE(s4_cts_parent_hws), + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* The 5,6,7 indexes corresponds to no real clock, so there are not used. */ +static u32 mux_table_hdmi_tx_sel[] = { 0, 1, 2, 3, 4, 8, 9, 10, 11, 12 }; +static const struct clk_hw *s4_cts_hdmi_tx_parent_hws[] = { + &s4_vclk_div1.hw, + &s4_vclk_div2.hw, + &s4_vclk_div4.hw, + &s4_vclk_div6.hw, + &s4_vclk_div12.hw, + &s4_vclk2_div1.hw, + &s4_vclk2_div2.hw, + &s4_vclk2_div4.hw, + &s4_vclk2_div6.hw, + &s4_vclk2_div12.hw +}; + +static struct clk_regmap s4_hdmi_tx_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_HDMI_CLK_CTRL, + .mask = 0xf, + .shift = 16, + .table = mux_table_hdmi_tx_sel, + }, + .hw.init = &(struct clk_init_data){ + .name = "hdmi_tx_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = s4_cts_hdmi_tx_parent_hws, + .num_parents = ARRAY_SIZE(s4_cts_hdmi_tx_parent_hws), + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_cts_enci = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VID_CLK_CTRL2, + .bit_idx = 0, + }, + .hw.init = &(struct clk_init_data) { + .name = "cts_enci", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_cts_enci_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_cts_encp = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VID_CLK_CTRL2, + .bit_idx = 2, + }, + .hw.init = &(struct clk_init_data) { + .name = "cts_encp", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_cts_encp_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_cts_vdac = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VID_CLK_CTRL2, + .bit_idx = 4, + }, + .hw.init = &(struct clk_init_data) { + .name = "cts_vdac", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_cts_vdac_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_hdmi_tx = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VID_CLK_CTRL2, + .bit_idx = 5, + }, + .hw.init = &(struct clk_init_data) { + .name = "hdmi_tx", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_hdmi_tx_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* HDMI Clocks */ +static const struct clk_parent_data s4_hdmi_parent_data[] = { + { .fw_name = "xtal", }, + { .fw_name = "fclk_div4", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div5", } +}; + +static struct clk_regmap s4_hdmi_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_HDMI_CLK_CTRL, + .mask = 0x3, + .shift = 9, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "hdmi_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_hdmi_parent_data, + .num_parents = ARRAY_SIZE(s4_hdmi_parent_data), + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_hdmi_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_HDMI_CLK_CTRL, + .shift = 0, + .width = 7, + }, + .hw.init = &(struct clk_init_data){ + .name = "hdmi_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_hdmi_sel.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_hdmi = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_HDMI_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "hdmi", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_hdmi_div.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_ts_clk_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_TS_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "ts_clk_div", + .ops = &clk_regmap_divider_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_ts_clk_gate = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_TS_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "ts_clk", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_ts_clk_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* + * The MALI IP is clocked by two identical clocks (mali_0 and mali_1) + * muxed by a glitch-free switch. The CCF can manage this glitch-free + * mux because it does top-to-bottom updates the each clock tree and + * switches to the "inactive" one when CLK_SET_RATE_GATE is set. + */ +static const struct clk_parent_data s4_mali_0_1_parent_data[] = { + { .fw_name = "xtal", }, + { .fw_name = "gp0_pll", }, + { .fw_name = "hifi_pll", }, + { .fw_name = "fclk_div2p5", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div4", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "fclk_div7", } +}; + +static struct clk_regmap s4_mali_0_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_MALI_CLK_CTRL, + .mask = 0x7, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "mali_0_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_mali_0_1_parent_data, + .num_parents = ARRAY_SIZE(s4_mali_0_1_parent_data), + /* + * Don't request the parent to change the rate because + * all GPU frequencies can be derived from the fclk_* + * clocks and one special GP0_PLL setting. This is + * important because we need the MPLL clocks for audio. + */ + .flags = 0, + }, +}; + +static struct clk_regmap s4_mali_0_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_MALI_CLK_CTRL, + .shift = 0, + .width = 7, + }, + .hw.init = &(struct clk_init_data){ + .name = "mali_0_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_mali_0_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_mali_0 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_MALI_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "mali_0", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_mali_0_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_mali_1_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_MALI_CLK_CTRL, + .mask = 0x7, + .shift = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "mali_1_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_mali_0_1_parent_data, + .num_parents = ARRAY_SIZE(s4_mali_0_1_parent_data), + .flags = 0, + }, +}; + +static struct clk_regmap s4_mali_1_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_MALI_CLK_CTRL, + .shift = 16, + .width = 7, + }, + .hw.init = &(struct clk_init_data){ + .name = "mali_1_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_mali_1_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_mali_1 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_MALI_CLK_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data){ + .name = "mali_1", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_mali_1_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_hw *s4_mali_parent_hws[] = { + &s4_mali_0.hw, + &s4_mali_1.hw +}; + +static struct clk_regmap s4_mali_mux = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_MALI_CLK_CTRL, + .mask = 1, + .shift = 31, + }, + .hw.init = &(struct clk_init_data){ + .name = "mali", + .ops = &clk_regmap_mux_ops, + .parent_hws = s4_mali_parent_hws, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* VDEC clocks */ +static const struct clk_parent_data s4_dec_parent_data[] = { + { .fw_name = "fclk_div2p5", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div4", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "fclk_div7", }, + { .fw_name = "hifi_pll", }, + { .fw_name = "gp0_pll", }, + { .fw_name = "xtal", } +}; + +static struct clk_regmap s4_vdec_p0_mux = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VDEC_CLK_CTRL, + .mask = 0x7, + .shift = 9, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data) { + .name = "vdec_p0_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_dec_parent_data, + .num_parents = ARRAY_SIZE(s4_dec_parent_data), + }, +}; + +static struct clk_regmap s4_vdec_p0_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_VDEC_CLK_CTRL, + .shift = 0, + .width = 7, + .flags = CLK_DIVIDER_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data) { + .name = "vdec_p0_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vdec_p0_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vdec_p0 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VDEC_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "vdec_p0", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vdec_p0_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vdec_p1_mux = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VDEC3_CLK_CTRL, + .mask = 0x7, + .shift = 9, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data) { + .name = "vdec_p1_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_dec_parent_data, + .num_parents = ARRAY_SIZE(s4_dec_parent_data), + }, +}; + +static struct clk_regmap s4_vdec_p1_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_VDEC3_CLK_CTRL, + .shift = 0, + .width = 7, + .flags = CLK_DIVIDER_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data) { + .name = "vdec_p1_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vdec_p1_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vdec_p1 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VDEC3_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "vdec_p1", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vdec_p1_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_hw *s4_vdec_mux_parent_hws[] = { + &s4_vdec_p0.hw, + &s4_vdec_p1.hw +}; + +static struct clk_regmap s4_vdec_mux = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VDEC3_CLK_CTRL, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data) { + .name = "vdec_mux", + .ops = &clk_regmap_mux_ops, + .parent_hws = s4_vdec_mux_parent_hws, + .num_parents = ARRAY_SIZE(s4_vdec_mux_parent_hws), + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_hevcf_p0_mux = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VDEC2_CLK_CTRL, + .mask = 0x7, + .shift = 9, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data) { + .name = "hevcf_p0_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_dec_parent_data, + .num_parents = ARRAY_SIZE(s4_dec_parent_data), + }, +}; + +static struct clk_regmap s4_hevcf_p0_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_VDEC2_CLK_CTRL, + .shift = 0, + .width = 7, + .flags = CLK_DIVIDER_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data) { + .name = "hevcf_p0_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_hevcf_p0_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_hevcf_p0 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VDEC2_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "hevcf_p0_gate", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_hevcf_p0_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_hevcf_p1_mux = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VDEC4_CLK_CTRL, + .mask = 0x7, + .shift = 9, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data) { + .name = "hevcf_p1_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_dec_parent_data, + .num_parents = ARRAY_SIZE(s4_dec_parent_data), + }, +}; + +static struct clk_regmap s4_hevcf_p1_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_VDEC4_CLK_CTRL, + .shift = 0, + .width = 7, + .flags = CLK_DIVIDER_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data) { + .name = "hevcf_p1_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_hevcf_p1_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_hevcf_p1 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VDEC4_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "hevcf_p1", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_hevcf_p1_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_hw *s4_hevcf_mux_parent_hws[] = { + &s4_hevcf_p0.hw, + &s4_hevcf_p1.hw +}; + +static struct clk_regmap s4_hevcf_mux = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VDEC4_CLK_CTRL, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data) { + .name = "hevcf", + .ops = &clk_regmap_mux_ops, + .parent_hws = s4_hevcf_mux_parent_hws, + .num_parents = ARRAY_SIZE(s4_hevcf_mux_parent_hws), + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* VPU Clock */ +static const struct clk_parent_data s4_vpu_parent_data[] = { + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div4", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "fclk_div7", }, + { .fw_name = "mpll1", }, + { .hw = &s4_vid_pll.hw }, + { .fw_name = "hifi_pll", }, + { .fw_name = "gp0_pll", }, +}; + +static struct clk_regmap s4_vpu_0_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VPU_CLK_CTRL, + .mask = 0x7, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "vpu_0_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_vpu_parent_data, + .num_parents = ARRAY_SIZE(s4_vpu_parent_data), + }, +}; + +static struct clk_regmap s4_vpu_0_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_VPU_CLK_CTRL, + .shift = 0, + .width = 7, + }, + .hw.init = &(struct clk_init_data){ + .name = "vpu_0_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vpu_0_sel.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vpu_0 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VPU_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "vpu_0", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vpu_0_div.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vpu_1_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VPU_CLK_CTRL, + .mask = 0x7, + .shift = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "vpu_1_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_vpu_parent_data, + .num_parents = ARRAY_SIZE(s4_vpu_parent_data), + }, +}; + +static struct clk_regmap s4_vpu_1_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_VPU_CLK_CTRL, + .shift = 16, + .width = 7, + }, + .hw.init = &(struct clk_init_data){ + .name = "vpu_1_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vpu_1_sel.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vpu_1 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VPU_CLK_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data) { + .name = "vpu_1", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vpu_1_div.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vpu = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VPU_CLK_CTRL, + .mask = 1, + .shift = 31, + }, + .hw.init = &(struct clk_init_data){ + .name = "vpu", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vpu_0.hw, + &s4_vpu_1.hw, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_parent_data vpu_clkb_tmp_parent_data[] = { + { .hw = &s4_vpu.hw }, + { .fw_name = "fclk_div4", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "fclk_div7", } +}; + +static struct clk_regmap s4_vpu_clkb_tmp_mux = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VPU_CLKB_CTRL, + .mask = 0x3, + .shift = 20, + }, + .hw.init = &(struct clk_init_data) { + .name = "vpu_clkb_tmp_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = vpu_clkb_tmp_parent_data, + .num_parents = ARRAY_SIZE(vpu_clkb_tmp_parent_data), + }, +}; + +static struct clk_regmap s4_vpu_clkb_tmp_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_VPU_CLKB_CTRL, + .shift = 16, + .width = 4, + }, + .hw.init = &(struct clk_init_data) { + .name = "vpu_clkb_tmp_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vpu_clkb_tmp_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vpu_clkb_tmp = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VPU_CLKB_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data){ + .name = "vpu_clkb_tmp", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vpu_clkb_tmp_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vpu_clkb_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_VPU_CLKB_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "vpu_clkb_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vpu_clkb_tmp.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vpu_clkb = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VPU_CLKB_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "vpu_clkb", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vpu_clkb_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_parent_data s4_vpu_clkc_parent_data[] = { + { .fw_name = "fclk_div4", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "fclk_div7", }, + { .fw_name = "mpll1", }, + { .hw = &s4_vid_pll.hw }, + { .fw_name = "mpll2", }, + { .fw_name = "gp0_pll", }, +}; + +static struct clk_regmap s4_vpu_clkc_p0_mux = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VPU_CLKC_CTRL, + .mask = 0x7, + .shift = 9, + }, + .hw.init = &(struct clk_init_data) { + .name = "vpu_clkc_p0_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_vpu_clkc_parent_data, + .num_parents = ARRAY_SIZE(s4_vpu_clkc_parent_data), + }, +}; + +static struct clk_regmap s4_vpu_clkc_p0_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_VPU_CLKC_CTRL, + .shift = 0, + .width = 7, + }, + .hw.init = &(struct clk_init_data) { + .name = "vpu_clkc_p0_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vpu_clkc_p0_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vpu_clkc_p0 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VPU_CLKC_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "vpu_clkc_p0", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vpu_clkc_p0_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vpu_clkc_p1_mux = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VPU_CLKC_CTRL, + .mask = 0x7, + .shift = 25, + }, + .hw.init = &(struct clk_init_data) { + .name = "vpu_clkc_p1_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_vpu_clkc_parent_data, + .num_parents = ARRAY_SIZE(s4_vpu_clkc_parent_data), + }, +}; + +static struct clk_regmap s4_vpu_clkc_p1_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_VPU_CLKC_CTRL, + .shift = 16, + .width = 7, + }, + .hw.init = &(struct clk_init_data) { + .name = "vpu_clkc_p1_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vpu_clkc_p1_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vpu_clkc_p1 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VPU_CLKC_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data){ + .name = "vpu_clkc_p1", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vpu_clkc_p1_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_hw *s4_vpu_mux_parent_hws[] = { + &s4_vpu_clkc_p0.hw, + &s4_vpu_clkc_p1.hw +}; + +static struct clk_regmap s4_vpu_clkc_mux = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VPU_CLKC_CTRL, + .mask = 0x1, + .shift = 31, + }, + .hw.init = &(struct clk_init_data) { + .name = "vpu_clkc_mux", + .ops = &clk_regmap_mux_ops, + .parent_hws = s4_vpu_mux_parent_hws, + .num_parents = ARRAY_SIZE(s4_vpu_mux_parent_hws), + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* VAPB Clock */ +static const struct clk_parent_data s4_vapb_parent_data[] = { + { .fw_name = "fclk_div4", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "fclk_div7", }, + { .fw_name = "mpll1", }, + { .hw = &s4_vid_pll.hw }, + { .fw_name = "mpll2", }, + { .fw_name = "fclk_div2p5", }, +}; + +static struct clk_regmap s4_vapb_0_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VAPBCLK_CTRL, + .mask = 0x7, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "vapb_0_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_vapb_parent_data, + .num_parents = ARRAY_SIZE(s4_vapb_parent_data), + }, +}; + +static struct clk_regmap s4_vapb_0_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_VAPBCLK_CTRL, + .shift = 0, + .width = 7, + }, + .hw.init = &(struct clk_init_data){ + .name = "vapb_0_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vapb_0_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vapb_0 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VAPBCLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "vapb_0", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vapb_0_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vapb_1_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VAPBCLK_CTRL, + .mask = 0x7, + .shift = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "vapb_1_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_vapb_parent_data, + .num_parents = ARRAY_SIZE(s4_vapb_parent_data), + }, +}; + +static struct clk_regmap s4_vapb_1_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_VAPBCLK_CTRL, + .shift = 16, + .width = 7, + }, + .hw.init = &(struct clk_init_data){ + .name = "vapb_1_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vapb_1_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vapb_1 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VAPBCLK_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data) { + .name = "vapb_1", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vapb_1_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vapb = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VAPBCLK_CTRL, + .mask = 1, + .shift = 31, + }, + .hw.init = &(struct clk_init_data){ + .name = "vapb_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vapb_0.hw, + &s4_vapb_1.hw + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_ge2d_gate = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VAPBCLK_CTRL, + .bit_idx = 30, + }, + .hw.init = &(struct clk_init_data) { + .name = "ge2d_clk", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &s4_vapb.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_parent_data s4_esmclk_parent_data[] = { + { .fw_name = "fclk_div7", }, + { .fw_name = "fclk_div4", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div5", }, +}; + +static struct clk_regmap s4_hdcp22_esmclk_mux = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_HDCP22_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data) { + .name = "hdcp22_esmclk_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_esmclk_parent_data, + .num_parents = ARRAY_SIZE(s4_esmclk_parent_data), + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_hdcp22_esmclk_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_HDCP22_CTRL, + .shift = 0, + .width = 7, + }, + .hw.init = &(struct clk_init_data) { + .name = "hdcp22_esmclk_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_hdcp22_esmclk_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_hdcp22_esmclk_gate = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_HDCP22_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "hdcp22_esmclk_gate", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_hdcp22_esmclk_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_parent_data s4_skpclk_parent_data[] = { + { .fw_name = "xtal", }, + { .fw_name = "fclk_div4", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div5", }, +}; + +static struct clk_regmap s4_hdcp22_skpclk_mux = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_HDCP22_CTRL, + .mask = 0x3, + .shift = 25, + }, + .hw.init = &(struct clk_init_data) { + .name = "hdcp22_skpclk_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_skpclk_parent_data, + .num_parents = ARRAY_SIZE(s4_skpclk_parent_data), + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_hdcp22_skpclk_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_HDCP22_CTRL, + .shift = 16, + .width = 7, + }, + .hw.init = &(struct clk_init_data) { + .name = "hdcp22_skpclk_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_hdcp22_skpclk_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_hdcp22_skpclk_gate = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_HDCP22_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data){ + .name = "hdcp22_skpclk_gate", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_hdcp22_skpclk_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_parent_data s4_vdin_parent_data[] = { + { .fw_name = "xtal", }, + { .fw_name = "fclk_div4", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div5", }, + { .hw = &s4_vid_pll.hw } +}; + +static struct clk_regmap s4_vdin_meas_mux = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_VDIN_MEAS_CLK_CTRL, + .mask = 0x7, + .shift = 9, + }, + .hw.init = &(struct clk_init_data) { + .name = "vdin_meas_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_vdin_parent_data, + .num_parents = ARRAY_SIZE(s4_vdin_parent_data), + }, +}; + +static struct clk_regmap s4_vdin_meas_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_VDIN_MEAS_CLK_CTRL, + .shift = 0, + .width = 7, + }, + .hw.init = &(struct clk_init_data) { + .name = "vdin_meas_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vdin_meas_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_vdin_meas_gate = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_VDIN_MEAS_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "vdin_meas_gate", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_vdin_meas_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* EMMC/NAND clock */ +static const struct clk_parent_data s4_sd_emmc_clk0_parent_data[] = { + { .fw_name = "xtal", }, + { .fw_name = "fclk_div2", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "hifi_pll", }, + { .fw_name = "fclk_div2p5", }, + { .fw_name = "mpll2", }, + { .fw_name = "mpll3", }, + { .fw_name = "gp0_pll", }, +}; + +static struct clk_regmap s4_sd_emmc_c_clk0_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_NAND_CLK_CTRL, + .mask = 0x7, + .shift = 9, + }, + .hw.init = &(struct clk_init_data) { + .name = "sd_emmc_c_clk0_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_sd_emmc_clk0_parent_data, + .num_parents = ARRAY_SIZE(s4_sd_emmc_clk0_parent_data), + }, +}; + +static struct clk_regmap s4_sd_emmc_c_clk0_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_NAND_CLK_CTRL, + .shift = 0, + .width = 7, + }, + .hw.init = &(struct clk_init_data) { + .name = "sd_emmc_c_clk0_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_sd_emmc_c_clk0_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_sd_emmc_c_clk0 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_NAND_CLK_CTRL, + .bit_idx = 7, + }, + .hw.init = &(struct clk_init_data){ + .name = "sd_emmc_c_clk0", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_sd_emmc_c_clk0_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_sd_emmc_a_clk0_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, + .mask = 0x7, + .shift = 9, + }, + .hw.init = &(struct clk_init_data) { + .name = "sd_emmc_a_clk0_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_sd_emmc_clk0_parent_data, + .num_parents = ARRAY_SIZE(s4_sd_emmc_clk0_parent_data), + }, +}; + +static struct clk_regmap s4_sd_emmc_a_clk0_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, + .shift = 0, + .width = 7, + }, + .hw.init = &(struct clk_init_data) { + .name = "sd_emmc_a_clk0_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_sd_emmc_a_clk0_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_sd_emmc_a_clk0 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, + .bit_idx = 7, + }, + .hw.init = &(struct clk_init_data){ + .name = "sd_emmc_a_clk0", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_sd_emmc_a_clk0_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_sd_emmc_b_clk0_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, + .mask = 0x7, + .shift = 25, + }, + .hw.init = &(struct clk_init_data) { + .name = "sd_emmc_b_clk0_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_sd_emmc_clk0_parent_data, + .num_parents = ARRAY_SIZE(s4_sd_emmc_clk0_parent_data), + }, +}; + +static struct clk_regmap s4_sd_emmc_b_clk0_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, + .shift = 16, + .width = 7, + }, + .hw.init = &(struct clk_init_data) { + .name = "sd_emmc_b_clk0_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_sd_emmc_b_clk0_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_sd_emmc_b_clk0 = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, + .bit_idx = 23, + }, + .hw.init = &(struct clk_init_data){ + .name = "sd_emmc_b_clk0", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_sd_emmc_b_clk0_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* SPICC Clock */ +static const struct clk_parent_data s4_spicc_parent_data[] = { + { .fw_name = "xtal", }, + { .hw = &s4_sys_clk.hw }, + { .fw_name = "fclk_div4", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div2", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "fclk_div7", }, +}; + +static struct clk_regmap s4_spicc0_mux = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_SPICC_CLK_CTRL, + .mask = 0x7, + .shift = 7, + }, + .hw.init = &(struct clk_init_data) { + .name = "spicc0_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_spicc_parent_data, + .num_parents = ARRAY_SIZE(s4_spicc_parent_data), + }, +}; + +static struct clk_regmap s4_spicc0_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_SPICC_CLK_CTRL, + .shift = 0, + .width = 6, + }, + .hw.init = &(struct clk_init_data) { + .name = "spicc0_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_spicc0_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_spicc0_gate = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_SPICC_CLK_CTRL, + .bit_idx = 6, + }, + .hw.init = &(struct clk_init_data){ + .name = "spicc0", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_spicc0_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* PWM Clock */ +static const struct clk_parent_data s4_pwm_parent_data[] = { + { .fw_name = "xtal", }, + { .hw = &s4_vid_pll.hw }, + { .fw_name = "fclk_div4", }, + { .fw_name = "fclk_div3", }, +}; + +static struct clk_regmap s4_pwm_a_mux = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_PWM_CLK_AB_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_a_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_pwm_parent_data, + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), + }, +}; + +static struct clk_regmap s4_pwm_a_div = { + .data = &(struct clk_regmap_div_data) { + .offset = CLKCTRL_PWM_CLK_AB_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_a_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_a_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_a_gate = { + .data = &(struct clk_regmap_gate_data) { + .offset = CLKCTRL_PWM_CLK_AB_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_a_gate", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_a_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_b_mux = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_PWM_CLK_AB_CTRL, + .mask = 0x3, + .shift = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_b_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_pwm_parent_data, + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), + }, +}; + +static struct clk_regmap s4_pwm_b_div = { + .data = &(struct clk_regmap_div_data) { + .offset = CLKCTRL_PWM_CLK_AB_CTRL, + .shift = 16, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_b_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_b_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_b_gate = { + .data = &(struct clk_regmap_gate_data) { + .offset = CLKCTRL_PWM_CLK_AB_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_b_gate", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_b_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_c_mux = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_PWM_CLK_CD_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_c_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_pwm_parent_data, + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), + }, +}; + +static struct clk_regmap s4_pwm_c_div = { + .data = &(struct clk_regmap_div_data) { + .offset = CLKCTRL_PWM_CLK_CD_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_c_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_c_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_c_gate = { + .data = &(struct clk_regmap_gate_data) { + .offset = CLKCTRL_PWM_CLK_CD_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_c_gate", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_c_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_d_mux = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_PWM_CLK_CD_CTRL, + .mask = 0x3, + .shift = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_d_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_pwm_parent_data, + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), + }, +}; + +static struct clk_regmap s4_pwm_d_div = { + .data = &(struct clk_regmap_div_data) { + .offset = CLKCTRL_PWM_CLK_CD_CTRL, + .shift = 16, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_d_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_d_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_d_gate = { + .data = &(struct clk_regmap_gate_data) { + .offset = CLKCTRL_PWM_CLK_CD_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_d_gate", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_d_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_e_mux = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_PWM_CLK_EF_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_e_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_pwm_parent_data, + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), + }, +}; + +static struct clk_regmap s4_pwm_e_div = { + .data = &(struct clk_regmap_div_data) { + .offset = CLKCTRL_PWM_CLK_EF_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_e_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_e_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_e_gate = { + .data = &(struct clk_regmap_gate_data) { + .offset = CLKCTRL_PWM_CLK_EF_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_e_gate", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_e_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_f_mux = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_PWM_CLK_EF_CTRL, + .mask = 0x3, + .shift = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_f_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_pwm_parent_data, + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), + }, +}; + +static struct clk_regmap s4_pwm_f_div = { + .data = &(struct clk_regmap_div_data) { + .offset = CLKCTRL_PWM_CLK_EF_CTRL, + .shift = 16, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_f_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_f_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_f_gate = { + .data = &(struct clk_regmap_gate_data) { + .offset = CLKCTRL_PWM_CLK_EF_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_f_gate", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_f_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_g_mux = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_PWM_CLK_GH_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_g_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_pwm_parent_data, + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), + }, +}; + +static struct clk_regmap s4_pwm_g_div = { + .data = &(struct clk_regmap_div_data) { + .offset = CLKCTRL_PWM_CLK_GH_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_g_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_g_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_g_gate = { + .data = &(struct clk_regmap_gate_data) { + .offset = CLKCTRL_PWM_CLK_GH_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_g_gate", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_g_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_h_mux = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_PWM_CLK_GH_CTRL, + .mask = 0x3, + .shift = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_h_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_pwm_parent_data, + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), + }, +}; + +static struct clk_regmap s4_pwm_h_div = { + .data = &(struct clk_regmap_div_data) { + .offset = CLKCTRL_PWM_CLK_GH_CTRL, + .shift = 16, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_h_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_h_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_h_gate = { + .data = &(struct clk_regmap_gate_data) { + .offset = CLKCTRL_PWM_CLK_GH_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_h_gate", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_h_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_i_mux = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_i_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_pwm_parent_data, + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), + }, +}; + +static struct clk_regmap s4_pwm_i_div = { + .data = &(struct clk_regmap_div_data) { + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_i_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_i_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_i_gate = { + .data = &(struct clk_regmap_gate_data) { + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_i_gate", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_i_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_j_mux = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, + .mask = 0x3, + .shift = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_j_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_pwm_parent_data, + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), + }, +}; + +static struct clk_regmap s4_pwm_j_div = { + .data = &(struct clk_regmap_div_data) { + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, + .shift = 16, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_j_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_h_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_pwm_j_gate = { + .data = &(struct clk_regmap_gate_data) { + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_j_gate", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_pwm_j_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_saradc_mux = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_SAR_CLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "saradc_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", }, + { .hw = &s4_sys_clk.hw }, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_saradc_div = { + .data = &(struct clk_regmap_div_data) { + .offset = CLKCTRL_SAR_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "saradc_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_saradc_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_saradc_gate = { + .data = &(struct clk_regmap_gate_data) { + .offset = CLKCTRL_SAR_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "saradc_clk", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_saradc_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* + * gen clk is designed for debug/monitor some internal clock quality. Some of the + * corresponding clock sources are not described in the clock tree and internal clock + * for debug, so they are skipped. + */ +static u32 s4_gen_clk_mux_table[] = { 0, 4, 5, 7, 19, 21, 22, + 23, 24, 25, 26, 27, 28 }; +static const struct clk_parent_data s4_gen_clk_parent_data[] = { + { .fw_name = "xtal", }, + { .hw = &s4_vid_pll.hw }, + { .fw_name = "gp0_pll", }, + { .fw_name = "hifi_pll", }, + { .fw_name = "fclk_div2", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div4", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "fclk_div7", }, + { .fw_name = "mpll0", }, + { .fw_name = "mpll1", }, + { .fw_name = "mpll2", }, + { .fw_name = "mpll3", }, +}; + +static struct clk_regmap s4_gen_clk_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = CLKCTRL_GEN_CLK_CTRL, + .mask = 0x1f, + .shift = 12, + .table = s4_gen_clk_mux_table, + }, + .hw.init = &(struct clk_init_data){ + .name = "gen_clk_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_gen_clk_parent_data, + .num_parents = ARRAY_SIZE(s4_gen_clk_parent_data), + }, +}; + +static struct clk_regmap s4_gen_clk_div = { + .data = &(struct clk_regmap_div_data){ + .offset = CLKCTRL_GEN_CLK_CTRL, + .shift = 0, + .width = 11, + }, + .hw.init = &(struct clk_init_data){ + .name = "gen_clk_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_gen_clk_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_gen_clk = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLKCTRL_GEN_CLK_CTRL, + .bit_idx = 11, + }, + .hw.init = &(struct clk_init_data) { + .name = "gen_clk", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_gen_clk_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE, + }, +}; + +static const struct clk_parent_data s4_adc_extclk_in_parent_data[] = { + { .fw_name = "xtal", }, + { .fw_name = "fclk_div4", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "fclk_div7", }, + { .fw_name = "mpll2", }, + { .fw_name = "gp0_pll", }, + { .fw_name = "hifi_pll", }, +}; + +static struct clk_regmap s4_adc_extclk_in_mux = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_DEMOD_CLK_CTRL, + .mask = 0x7, + .shift = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "adc_extclk_in_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = s4_adc_extclk_in_parent_data, + .num_parents = ARRAY_SIZE(s4_adc_extclk_in_parent_data), + }, +}; + +static struct clk_regmap s4_adc_extclk_in_div = { + .data = &(struct clk_regmap_div_data) { + .offset = CLKCTRL_DEMOD_CLK_CTRL, + .shift = 16, + .width = 7, + }, + .hw.init = &(struct clk_init_data){ + .name = "adc_extclk_in_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_adc_extclk_in_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_adc_extclk_in_gate = { + .data = &(struct clk_regmap_gate_data) { + .offset = CLKCTRL_DEMOD_CLK_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data){ + .name = "adc_extclk_in", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_adc_extclk_in_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_demod_core_clk_mux = { + .data = &(struct clk_regmap_mux_data) { + .offset = CLKCTRL_DEMOD_CLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "demod_core_clk_mux", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", }, + { .fw_name = "fclk_div7", }, + { .fw_name = "fclk_div4", }, + { .hw = &s4_adc_extclk_in_gate.hw } + }, + .num_parents = 4, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_demod_core_clk_div = { + .data = &(struct clk_regmap_div_data) { + .offset = CLKCTRL_DEMOD_CLK_CTRL, + .shift = 0, + .width = 7, + }, + .hw.init = &(struct clk_init_data){ + .name = "demod_core_clk_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_demod_core_clk_mux.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap s4_demod_core_clk_gate = { + .data = &(struct clk_regmap_gate_data) { + .offset = CLKCTRL_DEMOD_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "demod_core_clk", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &s4_demod_core_clk_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +#define MESON_GATE(_name, _reg, _bit) \ + MESON_PCLK(_name, _reg, _bit, &s4_sys_clk.hw) + +static MESON_GATE(s4_ddr, CLKCTRL_SYS_CLK_EN0_REG0, 0); +static MESON_GATE(s4_dos, CLKCTRL_SYS_CLK_EN0_REG0, 1); +static MESON_GATE(s4_ethphy, CLKCTRL_SYS_CLK_EN0_REG0, 4); +static MESON_GATE(s4_mali, CLKCTRL_SYS_CLK_EN0_REG0, 6); +static MESON_GATE(s4_aocpu, CLKCTRL_SYS_CLK_EN0_REG0, 13); +static MESON_GATE(s4_aucpu, CLKCTRL_SYS_CLK_EN0_REG0, 14); +static MESON_GATE(s4_cec, CLKCTRL_SYS_CLK_EN0_REG0, 16); +static MESON_GATE(s4_sdemmca, CLKCTRL_SYS_CLK_EN0_REG0, 24); +static MESON_GATE(s4_sdemmcb, CLKCTRL_SYS_CLK_EN0_REG0, 25); +static MESON_GATE(s4_nand, CLKCTRL_SYS_CLK_EN0_REG0, 26); +static MESON_GATE(s4_smartcard, CLKCTRL_SYS_CLK_EN0_REG0, 27); +static MESON_GATE(s4_acodec, CLKCTRL_SYS_CLK_EN0_REG0, 28); +static MESON_GATE(s4_spifc, CLKCTRL_SYS_CLK_EN0_REG0, 29); +static MESON_GATE(s4_msr_clk, CLKCTRL_SYS_CLK_EN0_REG0, 30); +static MESON_GATE(s4_ir_ctrl, CLKCTRL_SYS_CLK_EN0_REG0, 31); +static MESON_GATE(s4_audio, CLKCTRL_SYS_CLK_EN0_REG1, 0); +static MESON_GATE(s4_eth, CLKCTRL_SYS_CLK_EN0_REG1, 3); +static MESON_GATE(s4_uart_a, CLKCTRL_SYS_CLK_EN0_REG1, 5); +static MESON_GATE(s4_uart_b, CLKCTRL_SYS_CLK_EN0_REG1, 6); +static MESON_GATE(s4_uart_c, CLKCTRL_SYS_CLK_EN0_REG1, 7); +static MESON_GATE(s4_uart_d, CLKCTRL_SYS_CLK_EN0_REG1, 8); +static MESON_GATE(s4_uart_e, CLKCTRL_SYS_CLK_EN0_REG1, 9); +static MESON_GATE(s4_aififo, CLKCTRL_SYS_CLK_EN0_REG1, 11); +static MESON_GATE(s4_ts_ddr, CLKCTRL_SYS_CLK_EN0_REG1, 15); +static MESON_GATE(s4_ts_pll, CLKCTRL_SYS_CLK_EN0_REG1, 16); +static MESON_GATE(s4_g2d, CLKCTRL_SYS_CLK_EN0_REG1, 20); +static MESON_GATE(s4_spicc0, CLKCTRL_SYS_CLK_EN0_REG1, 21); +static MESON_GATE(s4_usb, CLKCTRL_SYS_CLK_EN0_REG1, 26); +static MESON_GATE(s4_i2c_m_a, CLKCTRL_SYS_CLK_EN0_REG1, 30); +static MESON_GATE(s4_i2c_m_b, CLKCTRL_SYS_CLK_EN0_REG1, 31); +static MESON_GATE(s4_i2c_m_c, CLKCTRL_SYS_CLK_EN0_REG2, 0); +static MESON_GATE(s4_i2c_m_d, CLKCTRL_SYS_CLK_EN0_REG2, 1); +static MESON_GATE(s4_i2c_m_e, CLKCTRL_SYS_CLK_EN0_REG2, 2); +static MESON_GATE(s4_hdmitx_apb, CLKCTRL_SYS_CLK_EN0_REG2, 4); +static MESON_GATE(s4_i2c_s_a, CLKCTRL_SYS_CLK_EN0_REG2, 5); +static MESON_GATE(s4_usb1_to_ddr, CLKCTRL_SYS_CLK_EN0_REG2, 8); +static MESON_GATE(s4_hdcp22, CLKCTRL_SYS_CLK_EN0_REG2, 10); +static MESON_GATE(s4_mmc_apb, CLKCTRL_SYS_CLK_EN0_REG2, 11); +static MESON_GATE(s4_rsa, CLKCTRL_SYS_CLK_EN0_REG2, 18); +static MESON_GATE(s4_cpu_debug, CLKCTRL_SYS_CLK_EN0_REG2, 19); +static MESON_GATE(s4_vpu_intr, CLKCTRL_SYS_CLK_EN0_REG2, 25); +static MESON_GATE(s4_demod, CLKCTRL_SYS_CLK_EN0_REG2, 27); +static MESON_GATE(s4_sar_adc, CLKCTRL_SYS_CLK_EN0_REG2, 28); +static MESON_GATE(s4_gic, CLKCTRL_SYS_CLK_EN0_REG2, 30); +static MESON_GATE(s4_pwm_ab, CLKCTRL_SYS_CLK_EN0_REG3, 7); +static MESON_GATE(s4_pwm_cd, CLKCTRL_SYS_CLK_EN0_REG3, 8); +static MESON_GATE(s4_pwm_ef, CLKCTRL_SYS_CLK_EN0_REG3, 9); +static MESON_GATE(s4_pwm_gh, CLKCTRL_SYS_CLK_EN0_REG3, 10); +static MESON_GATE(s4_pwm_ij, CLKCTRL_SYS_CLK_EN0_REG3, 11); + +/* Array of all clocks provided by this provider */ +static struct clk_hw_onecell_data s4_periphs_hw_onecell_data = { + .hws = { + [CLKID_RTC_32K_CLKIN] = &s4_rtc_32k_by_oscin_clkin.hw, + [CLKID_RTC_32K_DIV] = &s4_rtc_32k_by_oscin_div.hw, + [CLKID_RTC_32K_SEL] = &s4_rtc_32k_by_oscin_sel.hw, + [CLKID_RTC_32K_XATL] = &s4_rtc_32k_by_oscin.hw, + [CLKID_RTC_CLK] = &s4_rtc_clk.hw, + [CLKID_SYS_CLK_B_SEL] = &s4_sysclk_b_sel.hw, + [CLKID_SYS_CLK_B_DIV] = &s4_sysclk_b_div.hw, + [CLKID_SYS_CLK_B_GATE] = &s4_sysclk_b.hw, + [CLKID_SYS_CLK_A_SEL] = &s4_sysclk_a_sel.hw, + [CLKID_SYS_CLK_A_DIV] = &s4_sysclk_a_div.hw, + [CLKID_SYS_CLK_A_GATE] = &s4_sysclk_a.hw, + [CLKID_SYS_CLK] = &s4_sys_clk.hw, + [CLKID_CECA_32K_CLKIN] = &s4_ceca_32k_clkin.hw, + [CLKID_CECA_32K_DIV] = &s4_ceca_32k_div.hw, + [CLKID_CECA_32K_SEL_PRE] = &s4_ceca_32k_sel_pre.hw, + [CLKID_CECA_32K_SEL] = &s4_ceca_32k_sel.hw, + [CLKID_CECA_32K_CLKOUT] = &s4_ceca_32k_clkout.hw, + [CLKID_CECB_32K_CLKIN] = &s4_cecb_32k_clkin.hw, + [CLKID_CECB_32K_DIV] = &s4_cecb_32k_div.hw, + [CLKID_CECB_32K_SEL_PRE] = &s4_cecb_32k_sel_pre.hw, + [CLKID_CECB_32K_SEL] = &s4_cecb_32k_sel.hw, + [CLKID_CECB_32K_CLKOUT] = &s4_cecb_32k_clkout.hw, + [CLKID_SC_CLK_SEL] = &s4_sc_clk_mux.hw, + [CLKID_SC_CLK_DIV] = &s4_sc_clk_div.hw, + [CLKID_SC_CLK_GATE] = &s4_sc_clk_gate.hw, + [CLKID_12_24M_CLK_GATE] = &s4_12_24M_clk_gate.hw, + [CLKID_12M_CLK_DIV] = &s4_12M_clk_div.hw, + [CLKID_12_24M_CLK_SEL] = &s4_12_24M_clk.hw, + [CLKID_VID_PLL_DIV] = &s4_vid_pll_div.hw, + [CLKID_VID_PLL_SEL] = &s4_vid_pll_sel.hw, + [CLKID_VID_PLL] = &s4_vid_pll.hw, + [CLKID_VCLK_SEL] = &s4_vclk_sel.hw, + [CLKID_VCLK2_SEL] = &s4_vclk2_sel.hw, + [CLKID_VCLK_INPUT] = &s4_vclk_input.hw, + [CLKID_VCLK2_INPUT] = &s4_vclk2_input.hw, + [CLKID_VCLK_DIV] = &s4_vclk_div.hw, + [CLKID_VCLK2_DIV] = &s4_vclk2_div.hw, + [CLKID_VCLK] = &s4_vclk.hw, + [CLKID_VCLK2] = &s4_vclk2.hw, + [CLKID_VCLK_DIV1] = &s4_vclk_div1.hw, + [CLKID_VCLK_DIV2_EN] = &s4_vclk_div2_en.hw, + [CLKID_VCLK_DIV4_EN] = &s4_vclk_div4_en.hw, + [CLKID_VCLK_DIV6_EN] = &s4_vclk_div6_en.hw, + [CLKID_VCLK_DIV12_EN] = &s4_vclk_div12_en.hw, + [CLKID_VCLK2_DIV1] = &s4_vclk2_div1.hw, + [CLKID_VCLK2_DIV2_EN] = &s4_vclk2_div2_en.hw, + [CLKID_VCLK2_DIV4_EN] = &s4_vclk2_div4_en.hw, + [CLKID_VCLK2_DIV6_EN] = &s4_vclk2_div6_en.hw, + [CLKID_VCLK2_DIV12_EN] = &s4_vclk2_div12_en.hw, + [CLKID_VCLK_DIV2] = &s4_vclk_div2.hw, + [CLKID_VCLK_DIV4] = &s4_vclk_div4.hw, + [CLKID_VCLK_DIV6] = &s4_vclk_div6.hw, + [CLKID_VCLK_DIV12] = &s4_vclk_div12.hw, + [CLKID_VCLK2_DIV2] = &s4_vclk2_div2.hw, + [CLKID_VCLK2_DIV4] = &s4_vclk2_div4.hw, + [CLKID_VCLK2_DIV6] = &s4_vclk2_div6.hw, + [CLKID_VCLK2_DIV12] = &s4_vclk2_div12.hw, + [CLKID_CTS_ENCI_SEL] = &s4_cts_enci_sel.hw, + [CLKID_CTS_ENCP_SEL] = &s4_cts_encp_sel.hw, + [CLKID_CTS_VDAC_SEL] = &s4_cts_vdac_sel.hw, + [CLKID_HDMI_TX_SEL] = &s4_hdmi_tx_sel.hw, + [CLKID_CTS_ENCI] = &s4_cts_enci.hw, + [CLKID_CTS_ENCP] = &s4_cts_encp.hw, + [CLKID_CTS_VDAC] = &s4_cts_vdac.hw, + [CLKID_HDMI_TX] = &s4_hdmi_tx.hw, + [CLKID_HDMI_SEL] = &s4_hdmi_sel.hw, + [CLKID_HDMI_DIV] = &s4_hdmi_div.hw, + [CLKID_HDMI] = &s4_hdmi.hw, + [CLKID_TS_CLK_DIV] = &s4_ts_clk_div.hw, + [CLKID_TS_CLK_GATE] = &s4_ts_clk_gate.hw, + [CLKID_MALI_0_SEL] = &s4_mali_0_sel.hw, + [CLKID_MALI_0_DIV] = &s4_mali_0_div.hw, + [CLKID_MALI_0] = &s4_mali_0.hw, + [CLKID_MALI_1_SEL] = &s4_mali_1_sel.hw, + [CLKID_MALI_1_DIV] = &s4_mali_1_div.hw, + [CLKID_MALI_1] = &s4_mali_1.hw, + [CLKID_MALI] = &s4_mali_mux.hw, + [CLKID_VDEC_P0_SEL] = &s4_vdec_p0_mux.hw, + [CLKID_VDEC_P0_DIV] = &s4_vdec_p0_div.hw, + [CLKID_VDEC_P0] = &s4_vdec_p0.hw, + [CLKID_VDEC_P1_SEL] = &s4_vdec_p1_mux.hw, + [CLKID_VDEC_P1_DIV] = &s4_vdec_p1_div.hw, + [CLKID_VDEC_P1] = &s4_vdec_p1.hw, + [CLKID_VDEC_SEL] = &s4_vdec_mux.hw, + [CLKID_HEVCF_P0_SEL] = &s4_hevcf_p0_mux.hw, + [CLKID_HEVCF_P0_DIV] = &s4_hevcf_p0_div.hw, + [CLKID_HEVCF_P0] = &s4_hevcf_p0.hw, + [CLKID_HEVCF_P1_SEL] = &s4_hevcf_p1_mux.hw, + [CLKID_HEVCF_P1_DIV] = &s4_hevcf_p1_div.hw, + [CLKID_HEVCF_P1] = &s4_hevcf_p1.hw, + [CLKID_HEVCF_SEL] = &s4_hevcf_mux.hw, + [CLKID_VPU_0_SEL] = &s4_vpu_0_sel.hw, + [CLKID_VPU_0_DIV] = &s4_vpu_0_div.hw, + [CLKID_VPU_0] = &s4_vpu_0.hw, + [CLKID_VPU_1_SEL] = &s4_vpu_1_sel.hw, + [CLKID_VPU_1_DIV] = &s4_vpu_1_div.hw, + [CLKID_VPU_1] = &s4_vpu_1.hw, + [CLKID_VPU] = &s4_vpu.hw, + [CLKID_VPU_CLKB_TMP_SEL] = &s4_vpu_clkb_tmp_mux.hw, + [CLKID_VPU_CLKB_TMP_DIV] = &s4_vpu_clkb_tmp_div.hw, + [CLKID_VPU_CLKB_TMP] = &s4_vpu_clkb_tmp.hw, + [CLKID_VPU_CLKB_DIV] = &s4_vpu_clkb_div.hw, + [CLKID_VPU_CLKB] = &s4_vpu_clkb.hw, + [CLKID_VPU_CLKC_P0_SEL] = &s4_vpu_clkc_p0_mux.hw, + [CLKID_VPU_CLKC_P0_DIV] = &s4_vpu_clkc_p0_div.hw, + [CLKID_VPU_CLKC_P0] = &s4_vpu_clkc_p0.hw, + [CLKID_VPU_CLKC_P1_SEL] = &s4_vpu_clkc_p1_mux.hw, + [CLKID_VPU_CLKC_P1_DIV] = &s4_vpu_clkc_p1_div.hw, + [CLKID_VPU_CLKC_P1] = &s4_vpu_clkc_p1.hw, + [CLKID_VPU_CLKC_SEL] = &s4_vpu_clkc_mux.hw, + [CLKID_VAPB_0_SEL] = &s4_vapb_0_sel.hw, + [CLKID_VAPB_0_DIV] = &s4_vapb_0_div.hw, + [CLKID_VAPB_0] = &s4_vapb_0.hw, + [CLKID_VAPB_1_SEL] = &s4_vapb_1_sel.hw, + [CLKID_VAPB_1_DIV] = &s4_vapb_1_div.hw, + [CLKID_VAPB_1] = &s4_vapb_1.hw, + [CLKID_VAPB] = &s4_vapb.hw, + [CLKID_GE2D] = &s4_ge2d_gate.hw, + [CLKID_VDIN_MEAS_SEL] = &s4_vdin_meas_mux.hw, + [CLKID_VDIN_MEAS_DIV] = &s4_vdin_meas_div.hw, + [CLKID_VDIN_MEAS_GATE] = &s4_vdin_meas_gate.hw, + [CLKID_SD_EMMC_C_CLK_SEL] = &s4_sd_emmc_c_clk0_sel.hw, + [CLKID_SD_EMMC_C_CLK_DIV] = &s4_sd_emmc_c_clk0_div.hw, + [CLKID_SD_EMMC_C_CLK] = &s4_sd_emmc_c_clk0.hw, + [CLKID_SD_EMMC_A_CLK_SEL] = &s4_sd_emmc_a_clk0_sel.hw, + [CLKID_SD_EMMC_A_CLK_DIV] = &s4_sd_emmc_a_clk0_div.hw, + [CLKID_SD_EMMC_A_CLK] = &s4_sd_emmc_a_clk0.hw, + [CLKID_SD_EMMC_B_CLK_SEL] = &s4_sd_emmc_b_clk0_sel.hw, + [CLKID_SD_EMMC_B_CLK_DIV] = &s4_sd_emmc_b_clk0_div.hw, + [CLKID_SD_EMMC_B_CLK] = &s4_sd_emmc_b_clk0.hw, + [CLKID_SPICC0_SEL] = &s4_spicc0_mux.hw, + [CLKID_SPICC0_DIV] = &s4_spicc0_div.hw, + [CLKID_SPICC0_GATE] = &s4_spicc0_gate.hw, + [CLKID_PWM_A_SEL] = &s4_pwm_a_mux.hw, + [CLKID_PWM_A_DIV] = &s4_pwm_a_div.hw, + [CLKID_PWM_A_GATE] = &s4_pwm_a_gate.hw, + [CLKID_PWM_B_SEL] = &s4_pwm_b_mux.hw, + [CLKID_PWM_B_DIV] = &s4_pwm_b_div.hw, + [CLKID_PWM_B_GATE] = &s4_pwm_b_gate.hw, + [CLKID_PWM_C_SEL] = &s4_pwm_c_mux.hw, + [CLKID_PWM_C_DIV] = &s4_pwm_c_div.hw, + [CLKID_PWM_C_GATE] = &s4_pwm_c_gate.hw, + [CLKID_PWM_D_SEL] = &s4_pwm_d_mux.hw, + [CLKID_PWM_D_DIV] = &s4_pwm_d_div.hw, + [CLKID_PWM_D_GATE] = &s4_pwm_d_gate.hw, + [CLKID_PWM_E_SEL] = &s4_pwm_e_mux.hw, + [CLKID_PWM_E_DIV] = &s4_pwm_e_div.hw, + [CLKID_PWM_E_GATE] = &s4_pwm_e_gate.hw, + [CLKID_PWM_F_SEL] = &s4_pwm_f_mux.hw, + [CLKID_PWM_F_DIV] = &s4_pwm_f_div.hw, + [CLKID_PWM_F_GATE] = &s4_pwm_f_gate.hw, + [CLKID_PWM_G_SEL] = &s4_pwm_g_mux.hw, + [CLKID_PWM_G_DIV] = &s4_pwm_g_div.hw, + [CLKID_PWM_G_GATE] = &s4_pwm_g_gate.hw, + [CLKID_PWM_H_SEL] = &s4_pwm_h_mux.hw, + [CLKID_PWM_H_DIV] = &s4_pwm_h_div.hw, + [CLKID_PWM_H_GATE] = &s4_pwm_h_gate.hw, + [CLKID_PWM_I_SEL] = &s4_pwm_i_mux.hw, + [CLKID_PWM_I_DIV] = &s4_pwm_i_div.hw, + [CLKID_PWM_I_GATE] = &s4_pwm_i_gate.hw, + [CLKID_PWM_J_SEL] = &s4_pwm_j_mux.hw, + [CLKID_PWM_J_DIV] = &s4_pwm_j_div.hw, + [CLKID_PWM_J_GATE] = &s4_pwm_j_gate.hw, + [CLKID_SARADC_SEL] = &s4_saradc_mux.hw, + [CLKID_SARADC_DIV] = &s4_saradc_div.hw, + [CLKID_SARADC_GATE] = &s4_saradc_gate.hw, + [CLKID_GEN_SEL] = &s4_gen_clk_sel.hw, + [CLKID_GEN_DIV] = &s4_gen_clk_div.hw, + [CLKID_GEN_GATE] = &s4_gen_clk.hw, + [CLKID_DDR] = &s4_ddr.hw, + [CLKID_DOS] = &s4_dos.hw, + [CLKID_ETHPHY] = &s4_ethphy.hw, + [CLKID_MALI_GATE] = &s4_mali.hw, + [CLKID_AOCPU] = &s4_aocpu.hw, + [CLKID_AUCPU] = &s4_aucpu.hw, + [CLKID_CEC] = &s4_cec.hw, + [CLKID_SD_EMMC_A] = &s4_sdemmca.hw, + [CLKID_SD_EMMC_B] = &s4_sdemmcb.hw, + [CLKID_NAND] = &s4_nand.hw, + [CLKID_SMARTCARD] = &s4_smartcard.hw, + [CLKID_ACODEC] = &s4_acodec.hw, + [CLKID_SPIFC] = &s4_spifc.hw, + [CLKID_MSR_CLK] = &s4_msr_clk.hw, + [CLKID_IR_CTRL] = &s4_ir_ctrl.hw, + [CLKID_AUDIO] = &s4_audio.hw, + [CLKID_ETH] = &s4_eth.hw, + [CLKID_UART_A] = &s4_uart_a.hw, + [CLKID_UART_B] = &s4_uart_b.hw, + [CLKID_UART_C] = &s4_uart_c.hw, + [CLKID_UART_D] = &s4_uart_d.hw, + [CLKID_UART_E] = &s4_uart_e.hw, + [CLKID_AIFIFO] = &s4_aififo.hw, + [CLKID_TS_DDR] = &s4_ts_ddr.hw, + [CLKID_TS_PLL] = &s4_ts_pll.hw, + [CLKID_G2D] = &s4_g2d.hw, + [CLKID_SPICC0] = &s4_spicc0.hw, + [CLKID_USB] = &s4_usb.hw, + [CLKID_I2C_M_A] = &s4_i2c_m_a.hw, + [CLKID_I2C_M_B] = &s4_i2c_m_b.hw, + [CLKID_I2C_M_C] = &s4_i2c_m_c.hw, + [CLKID_I2C_M_D] = &s4_i2c_m_d.hw, + [CLKID_I2C_M_E] = &s4_i2c_m_e.hw, + [CLKID_HDMITX_APB] = &s4_hdmitx_apb.hw, + [CLKID_I2C_S_A] = &s4_i2c_s_a.hw, + [CLKID_USB1_TO_DDR] = &s4_usb1_to_ddr.hw, + [CLKID_HDCP22] = &s4_hdcp22.hw, + [CLKID_MMC_APB] = &s4_mmc_apb.hw, + [CLKID_RSA] = &s4_rsa.hw, + [CLKID_CPU_DEBUG] = &s4_cpu_debug.hw, + [CLKID_VPU_INTR] = &s4_vpu_intr.hw, + [CLKID_DEMOD] = &s4_demod.hw, + [CLKID_SAR_ADC] = &s4_sar_adc.hw, + [CLKID_GIC] = &s4_gic.hw, + [CLKID_PWM_AB] = &s4_pwm_ab.hw, + [CLKID_PWM_CD] = &s4_pwm_cd.hw, + [CLKID_PWM_EF] = &s4_pwm_ef.hw, + [CLKID_PWM_GH] = &s4_pwm_gh.hw, + [CLKID_PWM_IJ] = &s4_pwm_ij.hw, + [CLKID_HDCP22_ESMCLK_SEL] = &s4_hdcp22_esmclk_mux.hw, + [CLKID_HDCP22_ESMCLK_DIV] = &s4_hdcp22_esmclk_div.hw, + [CLKID_HDCP22_ESMCLK_GATE] = &s4_hdcp22_esmclk_gate.hw, + [CLKID_HDCP22_SKPCLK_SEL] = &s4_hdcp22_skpclk_mux.hw, + [CLKID_HDCP22_SKPCLK_DIV] = &s4_hdcp22_skpclk_div.hw, + [CLKID_HDCP22_SKPCLK_GATE] = &s4_hdcp22_skpclk_gate.hw, + [NR_CLKS] = NULL + }, + .num = NR_CLKS, +}; + +/* Convenience table to populate regmap in .probe */ +static struct clk_regmap *const s4_periphs_clk_regmaps[] = { + &s4_rtc_32k_by_oscin_clkin, + &s4_rtc_32k_by_oscin_div, + &s4_rtc_32k_by_oscin_sel, + &s4_rtc_32k_by_oscin, + &s4_rtc_clk, + &s4_sysclk_b_sel, + &s4_sysclk_b_div, + &s4_sysclk_b, + &s4_sysclk_a_sel, + &s4_sysclk_a_div, + &s4_sysclk_a, + &s4_sys_clk, + &s4_ceca_32k_clkin, + &s4_ceca_32k_div, + &s4_ceca_32k_sel_pre, + &s4_ceca_32k_sel, + &s4_ceca_32k_clkout, + &s4_cecb_32k_clkin, + &s4_cecb_32k_div, + &s4_cecb_32k_sel_pre, + &s4_cecb_32k_sel, + &s4_cecb_32k_clkout, + &s4_sc_clk_mux, + &s4_sc_clk_div, + &s4_sc_clk_gate, + &s4_12_24M_clk_gate, + &s4_12_24M_clk, + &s4_vid_pll_div, + &s4_vid_pll_sel, + &s4_vid_pll, + &s4_vclk_sel, + &s4_vclk2_sel, + &s4_vclk_input, + &s4_vclk2_input, + &s4_vclk_div, + &s4_vclk2_div, + &s4_vclk, + &s4_vclk2, + &s4_vclk_div1, + &s4_vclk_div2_en, + &s4_vclk_div4_en, + &s4_vclk_div6_en, + &s4_vclk_div12_en, + &s4_vclk2_div1, + &s4_vclk2_div2_en, + &s4_vclk2_div4_en, + &s4_vclk2_div6_en, + &s4_vclk2_div12_en, + &s4_cts_enci_sel, + &s4_cts_encp_sel, + &s4_cts_vdac_sel, + &s4_hdmi_tx_sel, + &s4_cts_enci, + &s4_cts_encp, + &s4_cts_vdac, + &s4_hdmi_tx, + &s4_hdmi_sel, + &s4_hdmi_div, + &s4_hdmi, + &s4_ts_clk_div, + &s4_ts_clk_gate, + &s4_mali_0_sel, + &s4_mali_0_div, + &s4_mali_0, + &s4_mali_1_sel, + &s4_mali_1_div, + &s4_mali_1, + &s4_mali_mux, + &s4_vdec_p0_mux, + &s4_vdec_p0_div, + &s4_vdec_p0, + &s4_vdec_p1_mux, + &s4_vdec_p1_div, + &s4_vdec_p1, + &s4_vdec_mux, + &s4_hevcf_p0_mux, + &s4_hevcf_p0_div, + &s4_hevcf_p0, + &s4_hevcf_p1_mux, + &s4_hevcf_p1_div, + &s4_hevcf_p1, + &s4_hevcf_mux, + &s4_vpu_0_sel, + &s4_vpu_0_div, + &s4_vpu_0, + &s4_vpu_1_sel, + &s4_vpu_1_div, + &s4_vpu_1, + &s4_vpu, + &s4_vpu_clkb_tmp_mux, + &s4_vpu_clkb_tmp_div, + &s4_vpu_clkb_tmp, + &s4_vpu_clkb_div, + &s4_vpu_clkb, + &s4_vpu_clkc_p0_mux, + &s4_vpu_clkc_p0_div, + &s4_vpu_clkc_p0, + &s4_vpu_clkc_p1_mux, + &s4_vpu_clkc_p1_div, + &s4_vpu_clkc_p1, + &s4_vpu_clkc_mux, + &s4_vapb_0_sel, + &s4_vapb_0_div, + &s4_vapb_0, + &s4_vapb_1_sel, + &s4_vapb_1_div, + &s4_vapb_1, + &s4_vapb, + &s4_ge2d_gate, + &s4_hdcp22_esmclk_mux, + &s4_hdcp22_esmclk_div, + &s4_hdcp22_esmclk_gate, + &s4_hdcp22_skpclk_mux, + &s4_hdcp22_skpclk_div, + &s4_hdcp22_skpclk_gate, + &s4_vdin_meas_mux, + &s4_vdin_meas_div, + &s4_vdin_meas_gate, + &s4_sd_emmc_c_clk0_sel, + &s4_sd_emmc_c_clk0_div, + &s4_sd_emmc_c_clk0, + &s4_sd_emmc_a_clk0_sel, + &s4_sd_emmc_a_clk0_div, + &s4_sd_emmc_a_clk0, + &s4_sd_emmc_b_clk0_sel, + &s4_sd_emmc_b_clk0_div, + &s4_sd_emmc_b_clk0, + &s4_spicc0_mux, + &s4_spicc0_div, + &s4_spicc0_gate, + &s4_pwm_a_mux, + &s4_pwm_a_div, + &s4_pwm_a_gate, + &s4_pwm_b_mux, + &s4_pwm_b_div, + &s4_pwm_b_gate, + &s4_pwm_c_mux, + &s4_pwm_c_div, + &s4_pwm_c_gate, + &s4_pwm_d_mux, + &s4_pwm_d_div, + &s4_pwm_d_gate, + &s4_pwm_e_mux, + &s4_pwm_e_div, + &s4_pwm_e_gate, + &s4_pwm_f_mux, + &s4_pwm_f_div, + &s4_pwm_f_gate, + &s4_pwm_g_mux, + &s4_pwm_g_div, + &s4_pwm_g_gate, + &s4_pwm_h_mux, + &s4_pwm_h_div, + &s4_pwm_h_gate, + &s4_pwm_i_mux, + &s4_pwm_i_div, + &s4_pwm_i_gate, + &s4_pwm_j_mux, + &s4_pwm_j_div, + &s4_pwm_j_gate, + &s4_saradc_mux, + &s4_saradc_div, + &s4_saradc_gate, + &s4_gen_clk_sel, + &s4_gen_clk_div, + &s4_gen_clk, + &s4_ddr, + &s4_dos, + &s4_ethphy, + &s4_mali, + &s4_aocpu, + &s4_aucpu, + &s4_cec, + &s4_sdemmca, + &s4_sdemmcb, + &s4_nand, + &s4_smartcard, + &s4_acodec, + &s4_spifc, + &s4_msr_clk, + &s4_ir_ctrl, + &s4_audio, + &s4_eth, + &s4_uart_a, + &s4_uart_b, + &s4_uart_c, + &s4_uart_d, + &s4_uart_e, + &s4_aififo, + &s4_ts_ddr, + &s4_ts_pll, + &s4_g2d, + &s4_spicc0, + &s4_usb, + &s4_i2c_m_a, + &s4_i2c_m_b, + &s4_i2c_m_c, + &s4_i2c_m_d, + &s4_i2c_m_e, + &s4_hdmitx_apb, + &s4_i2c_s_a, + &s4_usb1_to_ddr, + &s4_hdcp22, + &s4_mmc_apb, + &s4_rsa, + &s4_cpu_debug, + &s4_vpu_intr, + &s4_demod, + &s4_sar_adc, + &s4_gic, + &s4_pwm_ab, + &s4_pwm_cd, + &s4_pwm_ef, + &s4_pwm_gh, + &s4_pwm_ij, + &s4_demod_core_clk_mux, + &s4_demod_core_clk_div, + &s4_demod_core_clk_gate, + &s4_adc_extclk_in_mux, + &s4_adc_extclk_in_div, + &s4_adc_extclk_in_gate, +}; + +static struct regmap_config clkc_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static int meson_s4_periphs_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct regmap *regmap; + void __iomem *base; + int ret, i; + + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) + return PTR_ERR(base); + + regmap = devm_regmap_init_mmio(dev, base, &clkc_regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + /* Populate regmap for the regmap backed clocks */ + for (i = 0; i < ARRAY_SIZE(s4_periphs_clk_regmaps); i++) + s4_periphs_clk_regmaps[i]->map = regmap; + + for (i = 0; i < s4_periphs_hw_onecell_data.num; i++) { + /* array might be sparse */ + if (!s4_periphs_hw_onecell_data.hws[i]) + continue; + + ret = devm_clk_hw_register(dev, s4_periphs_hw_onecell_data.hws[i]); + if (ret) { + dev_err(dev, "Clock registration failed\n"); + return ret; + } + } + + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, + &s4_periphs_hw_onecell_data); +} + +static const struct of_device_id clkc_match_table[] = { + { + .compatible = "amlogic,s4-peripherals-clkc", + }, + {} +}; + +static struct platform_driver s4_driver = { + .probe = meson_s4_periphs_probe, + .driver = { + .name = "s4-periphs-clkc", + .of_match_table = clkc_match_table, + }, +}; + +module_platform_driver(s4_driver); +MODULE_LICENSE("GPL"); diff --git a/drivers/clk/meson/s4-peripherals.h b/drivers/clk/meson/s4-peripherals.h new file mode 100644 index 000000000000..13ef07bada83 --- /dev/null +++ b/drivers/clk/meson/s4-peripherals.h @@ -0,0 +1,218 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright (c) 2021 Amlogic, inc. + * Author: Yu Tu <yu.tu@amlogic.com> + */ + +#ifndef __MESON_S4_PERIPHERALS_H__ +#define __MESON_S4_PERIPHERALS_H__ + +/* + * Clock controller register offsets + * REG_BASE: REGISTER_BASE_ADDR = 0xfe000000 + */ +#define CLKCTRL_OSCIN_CTRL 0x004 +#define CLKCTRL_RTC_BY_OSCIN_CTRL0 0x008 +#define CLKCTRL_RTC_BY_OSCIN_CTRL1 0x00c +#define CLKCTRL_RTC_CTRL 0x010 +#define CLKCTRL_CHECK_CLK_RESULT 0x014 +#define CLKCTRL_MBIST_ATSPEED_CTRL 0x018 +#define CLKCTRL_LOCK_BIT_REG0 0x020 +#define CLKCTRL_LOCK_BIT_REG1 0x024 +#define CLKCTRL_LOCK_BIT_REG2 0x028 +#define CLKCTRL_LOCK_BIT_REG3 0x02c +#define CLKCTRL_PROT_BIT_REG0 0x030 +#define CLKCTRL_PROT_BIT_REG1 0x034 +#define CLKCTRL_PROT_BIT_REG2 0x038 +#define CLKCTRL_PROT_BIT_REG3 0x03c +#define CLKCTRL_SYS_CLK_CTRL0 0x040 +#define CLKCTRL_SYS_CLK_EN0_REG0 0x044 +#define CLKCTRL_SYS_CLK_EN0_REG1 0x048 +#define CLKCTRL_SYS_CLK_EN0_REG2 0x04c +#define CLKCTRL_SYS_CLK_EN0_REG3 0x050 +#define CLKCTRL_SYS_CLK_EN1_REG0 0x054 +#define CLKCTRL_SYS_CLK_EN1_REG1 0x058 +#define CLKCTRL_SYS_CLK_EN1_REG2 0x05c +#define CLKCTRL_SYS_CLK_EN1_REG3 0x060 +#define CLKCTRL_SYS_CLK_VPU_EN0 0x064 +#define CLKCTRL_SYS_CLK_VPU_EN1 0x068 +#define CLKCTRL_AXI_CLK_CTRL0 0x06c +#define CLKCTRL_TST_CTRL0 0x080 +#define CLKCTRL_TST_CTRL1 0x084 +#define CLKCTRL_CECA_CTRL0 0x088 +#define CLKCTRL_CECA_CTRL1 0x08c +#define CLKCTRL_CECB_CTRL0 0x090 +#define CLKCTRL_CECB_CTRL1 0x094 +#define CLKCTRL_SC_CLK_CTRL 0x098 +#define CLKCTRL_RAMA_CLK_CTRL0 0x0a4 +#define CLKCTRL_CLK12_24_CTRL 0x0a8 +#define CLKCTRL_VID_CLK_CTRL 0x0c0 +#define CLKCTRL_VID_CLK_CTRL2 0x0c4 +#define CLKCTRL_VID_CLK_DIV 0x0c8 +#define CLKCTRL_VIID_CLK_DIV 0x0cc +#define CLKCTRL_VIID_CLK_CTRL 0x0d0 +#define CLKCTRL_HDMI_CLK_CTRL 0x0e0 +#define CLKCTRL_VID_PLL_CLK_DIV 0x0e4 +#define CLKCTRL_VPU_CLK_CTRL 0x0e8 +#define CLKCTRL_VPU_CLKB_CTRL 0x0ec +#define CLKCTRL_VPU_CLKC_CTRL 0x0f0 +#define CLKCTRL_VID_LOCK_CLK_CTRL 0x0f4 +#define CLKCTRL_VDIN_MEAS_CLK_CTRL 0x0f8 +#define CLKCTRL_VAPBCLK_CTRL 0x0fc +#define CLKCTRL_HDCP22_CTRL 0x100 +#define CLKCTRL_CDAC_CLK_CTRL 0x108 +#define CLKCTRL_VDEC_CLK_CTRL 0x140 +#define CLKCTRL_VDEC2_CLK_CTRL 0x144 +#define CLKCTRL_VDEC3_CLK_CTRL 0x148 +#define CLKCTRL_VDEC4_CLK_CTRL 0x14c +#define CLKCTRL_TS_CLK_CTRL 0x158 +#define CLKCTRL_MALI_CLK_CTRL 0x15c +#define CLKCTRL_ETH_CLK_CTRL 0x164 +#define CLKCTRL_NAND_CLK_CTRL 0x168 +#define CLKCTRL_SD_EMMC_CLK_CTRL 0x16c +#define CLKCTRL_SPICC_CLK_CTRL 0x174 +#define CLKCTRL_GEN_CLK_CTRL 0x178 +#define CLKCTRL_SAR_CLK_CTRL 0x17c +#define CLKCTRL_PWM_CLK_AB_CTRL 0x180 +#define CLKCTRL_PWM_CLK_CD_CTRL 0x184 +#define CLKCTRL_PWM_CLK_EF_CTRL 0x188 +#define CLKCTRL_PWM_CLK_GH_CTRL 0x18c +#define CLKCTRL_PWM_CLK_IJ_CTRL 0x190 +#define CLKCTRL_DEMOD_CLK_CTRL 0x200 +#define CLKCTRL_TIMESTAMP_CTRL 0x400 +#define CLKCTRL_TIMESTAMP_CTRL1 0x404 +#define CLKCTRL_TIMESTAMP_CTRL2 0x40c +#define CLKCTRL_TIMESTAMP_RD0 0x410 +#define CLKCTRL_TIMESTAMP_RD1 0x414 +#define CLKCTRL_TIMEBASE_CTRL0 0x418 +#define CLKCTRL_TIMEBASE_CTRL1 0x41c +#define CLKCTRL_EFUSE_CPU_CFG01 0x480 +#define CLKCTRL_EFUSE_CPU_CFG2 0x484 +#define CLKCTRL_EFUSE_ENCP_CFG0 0x488 +#define CLKCTRL_EFUSE_MALI_CFG01 0x48c +#define CLKCTRL_EFUSE_LOCK 0x498 + +/* + * CLKID index values + * + * These indices are entirely contrived and do not map onto the hardware. + * It has now been decided to expose everything by default in the DT header: + * include/dt-bindings/clock/axg-clkc.h. Only the clocks ids we don't want + * to expose, such as the internal muxes and dividers of composite clocks, + * will remain defined here. + */ +#define CLKID_RTC_32K_CLKIN 0 +#define CLKID_RTC_32K_DIV 1 +#define CLKID_RTC_32K_SEL 2 +#define CLKID_RTC_32K_XATL 3 +#define CLKID_SYS_CLK_B_SEL 5 +#define CLKID_SYS_CLK_B_DIV 6 +#define CLKID_SYS_CLK_A_SEL 8 +#define CLKID_SYS_CLK_A_DIV 9 +#define CLKID_CECA_32K_CLKIN 12 +#define CLKID_CECA_32K_DIV 13 +#define CLKID_CECA_32K_SEL_PRE 14 +#define CLKID_CECA_32K_SEL 15 +#define CLKID_CECB_32K_CLKIN 17 +#define CLKID_CECB_32K_DIV 18 +#define CLKID_CECB_32K_SEL_PRE 19 +#define CLKID_CECB_32K_SEL 20 +#define CLKID_SC_CLK_SEL 22 +#define CLKID_SC_CLK_DIV 23 +#define CLKID_12_24M_CLK_GATE 25 +#define CLKID_12M_CLK_DIV 26 +#define CLKID_VID_PLL_DIV 28 +#define CLKID_VID_PLL_SEL 29 +#define CLKID_VCLK_SEL 31 +#define CLKID_VCLK2_SEL 32 +#define CLKID_VCLK_INPUT 33 +#define CLKID_VCLK2_INPUT 34 +#define CLKID_VCLK_DIV 35 +#define CLKID_VCLK2_DIV 36 +#define CLKID_VCLK_DIV2_EN 40 +#define CLKID_VCLK_DIV4_EN 41 +#define CLKID_VCLK_DIV6_EN 42 +#define CLKID_VCLK_DIV12_EN 43 +#define CLKID_VCLK2_DIV2_EN 45 +#define CLKID_VCLK2_DIV4_EN 46 +#define CLKID_VCLK2_DIV6_EN 47 +#define CLKID_VCLK2_DIV12_EN 48 +#define CLKID_CTS_ENCI_SEL 57 +#define CLKID_CTS_ENCP_SEL 58 +#define CLKID_CTS_VDAC_SEL 59 +#define CLKID_HDMI_TX_SEL 60 +#define CLKID_HDMI_TX 64 +#define CLKID_HDMI_SEL 65 +#define CLKID_HDMI_DIV 66 +#define CLKID_TS_CLK_DIV 68 +#define CLKID_MALI_0_SEL 70 +#define CLKID_MALI_0_DIV 71 +#define CLKID_MALI_1_SEL 73 +#define CLKID_MALI_1_DIV 74 +#define CLKID_VDEC_P0_SEL 77 +#define CLKID_VDEC_P0_DIV 78 +#define CLKID_VDEC_P1_SEL 80 +#define CLKID_VDEC_P1_DIV 81 +#define CLKID_HEVCF_P0_SEL 84 +#define CLKID_HEVCF_P0_DIV 85 +#define CLKID_HEVCF_P1_SEL 87 +#define CLKID_HEVCF_P1_DIV 88 +#define CLKID_VPU_0_SEL 91 +#define CLKID_VPU_0_DIV 92 +#define CLKID_VPU_1_SEL 94 +#define CLKID_VPU_1_DIV 95 +#define CLKID_VPU_CLKB_TMP_SEL 98 +#define CLKID_VPU_CLKB_TMP_DIV 99 +#define CLKID_VPU_CLKB_DIV 101 +#define CLKID_VPU_CLKC_P0_SEL 103 +#define CLKID_VPU_CLKC_P0_DIV 104 +#define CLKID_VPU_CLKC_P1_SEL 106 +#define CLKID_VPU_CLKC_P1_DIV 107 +#define CLKID_VAPB_0_SEL 110 +#define CLKID_VAPB_0_DIV 111 +#define CLKID_VAPB_1_SEL 113 +#define CLKID_VAPB_1_DIV 114 +#define CLKID_VDIN_MEAS_SEL 118 +#define CLKID_VDIN_MEAS_DIV 119 +#define CLKID_SD_EMMC_C_CLK_SEL 121 +#define CLKID_SD_EMMC_C_CLK_DIV 122 +#define CLKID_SD_EMMC_A_CLK_SEL 124 +#define CLKID_SD_EMMC_A_CLK_DIV 125 +#define CLKID_SD_EMMC_B_CLK_SEL 127 +#define CLKID_SD_EMMC_B_CLK_DIV 128 +#define CLKID_SPICC0_SEL 130 +#define CLKID_SPICC0_DIV 131 +#define CLKID_PWM_A_SEL 133 +#define CLKID_PWM_A_DIV 134 +#define CLKID_PWM_B_SEL 136 +#define CLKID_PWM_B_DIV 137 +#define CLKID_PWM_C_SEL 139 +#define CLKID_PWM_C_DIV 140 +#define CLKID_PWM_D_SEL 142 +#define CLKID_PWM_D_DIV 143 +#define CLKID_PWM_E_SEL 145 +#define CLKID_PWM_E_DIV 146 +#define CLKID_PWM_F_SEL 148 +#define CLKID_PWM_F_DIV 149 +#define CLKID_PWM_G_SEL 151 +#define CLKID_PWM_G_DIV 152 +#define CLKID_PWM_H_SEL 154 +#define CLKID_PWM_H_DIV 155 +#define CLKID_PWM_I_SEL 157 +#define CLKID_PWM_I_DIV 158 +#define CLKID_PWM_J_SEL 160 +#define CLKID_PWM_J_DIV 161 +#define CLKID_SARADC_SEL 163 +#define CLKID_SARADC_DIV 164 +#define CLKID_GEN_SEL 166 +#define CLKID_GEN_DIV 167 +#define CLKID_HDCP22_ESMCLK_SEL 219 +#define CLKID_HDCP22_ESMCLK_DIV 220 +#define CLKID_HDCP22_SKPCLK_SEL 222 +#define CLKID_HDCP22_SKPCLK_DIV 223 + +#define NR_CLKS 225 +/* include the CLKIDs that have been made part of the DT binding */ +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> + +#endif /* __MESON_S4_PERIPHERALS_H__ */ diff --git a/include/dt-bindings/clock/amlogic,s4-peripherals-clkc.h b/include/dt-bindings/clock/amlogic,s4-peripherals-clkc.h new file mode 100644 index 000000000000..bbec5094d5c3 --- /dev/null +++ b/include/dt-bindings/clock/amlogic,s4-peripherals-clkc.h @@ -0,0 +1,131 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. + * Author: Yu Tu <yu.tu@amlogic.com> + */ + +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PERIPHERALS_CLKC_H +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PERIPHERALS_CLKC_H + +/* + * CLKID index values + */ + +#define CLKID_RTC_CLK 4 +#define CLKID_SYS_CLK_B_GATE 7 +#define CLKID_SYS_CLK_A_GATE 10 +#define CLKID_SYS_CLK 11 +#define CLKID_CECA_32K_CLKOUT 16 +#define CLKID_CECB_32K_CLKOUT 21 +#define CLKID_SC_CLK_GATE 24 +#define CLKID_12_24M_CLK_SEL 27 +#define CLKID_VID_PLL 30 +#define CLKID_VCLK 37 +#define CLKID_VCLK2 38 +#define CLKID_VCLK_DIV1 39 +#define CLKID_VCLK2_DIV1 44 +#define CLKID_VCLK_DIV2 49 +#define CLKID_VCLK_DIV4 50 +#define CLKID_VCLK_DIV6 51 +#define CLKID_VCLK_DIV12 52 +#define CLKID_VCLK2_DIV2 53 +#define CLKID_VCLK2_DIV4 54 +#define CLKID_VCLK2_DIV6 55 +#define CLKID_VCLK2_DIV12 56 +#define CLKID_CTS_ENCI 61 +#define CLKID_CTS_ENCP 62 +#define CLKID_CTS_VDAC 63 +#define CLKID_HDMI 67 +#define CLKID_TS_CLK_GATE 69 +#define CLKID_MALI_0 72 +#define CLKID_MALI_1 75 +#define CLKID_MALI 76 +#define CLKID_VDEC_P0 79 +#define CLKID_VDEC_P1 82 +#define CLKID_VDEC_SEL 83 +#define CLKID_HEVCF_P0 86 +#define CLKID_HEVCF_P1 89 +#define CLKID_HEVCF_SEL 90 +#define CLKID_VPU_0 93 +#define CLKID_VPU_1 96 +#define CLKID_VPU 97 +#define CLKID_VPU_CLKB_TMP 100 +#define CLKID_VPU_CLKB 102 +#define CLKID_VPU_CLKC_P0 105 +#define CLKID_VPU_CLKC_P1 108 +#define CLKID_VPU_CLKC_SEL 109 +#define CLKID_VAPB_0 112 +#define CLKID_VAPB_1 115 +#define CLKID_VAPB 116 +#define CLKID_GE2D 117 +#define CLKID_VDIN_MEAS_GATE 120 +#define CLKID_SD_EMMC_C_CLK 123 +#define CLKID_SD_EMMC_A_CLK 126 +#define CLKID_SD_EMMC_B_CLK 129 +#define CLKID_SPICC0_GATE 132 +#define CLKID_PWM_A_GATE 135 +#define CLKID_PWM_B_GATE 138 +#define CLKID_PWM_C_GATE 141 +#define CLKID_PWM_D_GATE 144 +#define CLKID_PWM_E_GATE 147 +#define CLKID_PWM_F_GATE 150 +#define CLKID_PWM_G_GATE 153 +#define CLKID_PWM_H_GATE 156 +#define CLKID_PWM_I_GATE 159 +#define CLKID_PWM_J_GATE 162 +#define CLKID_SARADC_GATE 165 +#define CLKID_GEN_GATE 168 +#define CLKID_DDR 169 +#define CLKID_DOS 170 +#define CLKID_ETHPHY 171 +#define CLKID_MALI_GATE 172 +#define CLKID_AOCPU 173 +#define CLKID_AUCPU 174 +#define CLKID_CEC 175 +#define CLKID_SD_EMMC_A 176 +#define CLKID_SD_EMMC_B 177 +#define CLKID_NAND 178 +#define CLKID_SMARTCARD 179 +#define CLKID_ACODEC 180 +#define CLKID_SPIFC 181 +#define CLKID_MSR_CLK 182 +#define CLKID_IR_CTRL 183 +#define CLKID_AUDIO 184 +#define CLKID_ETH 185 +#define CLKID_UART_A 186 +#define CLKID_UART_B 187 +#define CLKID_UART_C 188 +#define CLKID_UART_D 189 +#define CLKID_UART_E 190 +#define CLKID_AIFIFO 191 +#define CLKID_TS_DDR 192 +#define CLKID_TS_PLL 193 +#define CLKID_G2D 194 +#define CLKID_SPICC0 195 +#define CLKID_SPICC1 196 +#define CLKID_USB 197 +#define CLKID_I2C_M_A 198 +#define CLKID_I2C_M_B 199 +#define CLKID_I2C_M_C 200 +#define CLKID_I2C_M_D 201 +#define CLKID_I2C_M_E 202 +#define CLKID_HDMITX_APB 203 +#define CLKID_I2C_S_A 204 +#define CLKID_USB1_TO_DDR 205 +#define CLKID_HDCP22 206 +#define CLKID_MMC_APB 207 +#define CLKID_RSA 208 +#define CLKID_CPU_DEBUG 209 +#define CLKID_VPU_INTR 210 +#define CLKID_DEMOD 211 +#define CLKID_SAR_ADC 212 +#define CLKID_GIC 213 +#define CLKID_PWM_AB 214 +#define CLKID_PWM_CD 215 +#define CLKID_PWM_EF 216 +#define CLKID_PWM_GH 217 +#define CLKID_PWM_IJ 218 +#define CLKID_HDCP22_ESMCLK_GATE 221 +#define CLKID_HDCP22_SKPCLK_GATE 224 + +#endif /* _DT_BINDINGS_CLOCK_AMLOGIC_S4_PERIPHERALS_CLKC_H */ -- 2.33.1 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply related [flat|nested] 109+ messages in thread
* Re: [PATCH V5 3/4] clk: meson: s4: add s4 SoC peripheral clock controller driver and bindings 2022-11-23 2:13 ` Yu Tu (?) @ 2022-11-23 10:09 ` Krzysztof Kozlowski -1 siblings, 0 replies; 109+ messages in thread From: Krzysztof Kozlowski @ 2022-11-23 10:09 UTC (permalink / raw) To: Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 03:13, Yu Tu wrote: > Add the peripherals clock controller found and bindings in the s4 SoC family. > > Signed-off-by: Yu Tu <yu.tu@amlogic.com> > --- > .../clock/amlogic,s4-peripherals-clkc.yaml | 105 + No, this is total mess now. Additionally, you received a lot of feedback but your changelog says only: "V3 -> V4: change format and clock flags." so you ignored entire feedback? That's not the way to work with patches. Best regards, Krzysztof _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 3/4] clk: meson: s4: add s4 SoC peripheral clock controller driver and bindings @ 2022-11-23 10:09 ` Krzysztof Kozlowski 0 siblings, 0 replies; 109+ messages in thread From: Krzysztof Kozlowski @ 2022-11-23 10:09 UTC (permalink / raw) To: Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 03:13, Yu Tu wrote: > Add the peripherals clock controller found and bindings in the s4 SoC family. > > Signed-off-by: Yu Tu <yu.tu@amlogic.com> > --- > .../clock/amlogic,s4-peripherals-clkc.yaml | 105 + No, this is total mess now. Additionally, you received a lot of feedback but your changelog says only: "V3 -> V4: change format and clock flags." so you ignored entire feedback? That's not the way to work with patches. Best regards, Krzysztof ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 3/4] clk: meson: s4: add s4 SoC peripheral clock controller driver and bindings @ 2022-11-23 10:09 ` Krzysztof Kozlowski 0 siblings, 0 replies; 109+ messages in thread From: Krzysztof Kozlowski @ 2022-11-23 10:09 UTC (permalink / raw) To: Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 03:13, Yu Tu wrote: > Add the peripherals clock controller found and bindings in the s4 SoC family. > > Signed-off-by: Yu Tu <yu.tu@amlogic.com> > --- > .../clock/amlogic,s4-peripherals-clkc.yaml | 105 + No, this is total mess now. Additionally, you received a lot of feedback but your changelog says only: "V3 -> V4: change format and clock flags." so you ignored entire feedback? That's not the way to work with patches. Best regards, Krzysztof _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 3/4] clk: meson: s4: add s4 SoC peripheral clock controller driver and bindings 2022-11-23 10:09 ` Krzysztof Kozlowski (?) @ 2022-11-23 11:22 ` Yu Tu -1 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 11:22 UTC (permalink / raw) To: Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 2022/11/23 18:09, Krzysztof Kozlowski wrote: > [ EXTERNAL EMAIL ] > > On 23/11/2022 03:13, Yu Tu wrote: >> Add the peripherals clock controller found and bindings in the s4 SoC family. >> >> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >> --- >> .../clock/amlogic,s4-peripherals-clkc.yaml | 105 + > > No, this is total mess now. > > Additionally, you received a lot of feedback but your changelog says only: > "V3 -> V4: change format and clock flags." > so you ignored entire feedback? > > That's not the way to work with patches. Hi Krzysztof, You can check the previous email reply. Now I don't know who to follow your advice or Jerome's. I'm confused. Maybe you need to come to a conclusion. So I can change it in the next patch. > > Best regards, > Krzysztof > > . ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 3/4] clk: meson: s4: add s4 SoC peripheral clock controller driver and bindings @ 2022-11-23 11:22 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 11:22 UTC (permalink / raw) To: Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 2022/11/23 18:09, Krzysztof Kozlowski wrote: > [ EXTERNAL EMAIL ] > > On 23/11/2022 03:13, Yu Tu wrote: >> Add the peripherals clock controller found and bindings in the s4 SoC family. >> >> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >> --- >> .../clock/amlogic,s4-peripherals-clkc.yaml | 105 + > > No, this is total mess now. > > Additionally, you received a lot of feedback but your changelog says only: > "V3 -> V4: change format and clock flags." > so you ignored entire feedback? > > That's not the way to work with patches. Hi Krzysztof, You can check the previous email reply. Now I don't know who to follow your advice or Jerome's. I'm confused. Maybe you need to come to a conclusion. So I can change it in the next patch. > > Best regards, > Krzysztof > > . _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 3/4] clk: meson: s4: add s4 SoC peripheral clock controller driver and bindings @ 2022-11-23 11:22 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 11:22 UTC (permalink / raw) To: Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 2022/11/23 18:09, Krzysztof Kozlowski wrote: > [ EXTERNAL EMAIL ] > > On 23/11/2022 03:13, Yu Tu wrote: >> Add the peripherals clock controller found and bindings in the s4 SoC family. >> >> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >> --- >> .../clock/amlogic,s4-peripherals-clkc.yaml | 105 + > > No, this is total mess now. > > Additionally, you received a lot of feedback but your changelog says only: > "V3 -> V4: change format and clock flags." > so you ignored entire feedback? > > That's not the way to work with patches. Hi Krzysztof, You can check the previous email reply. Now I don't know who to follow your advice or Jerome's. I'm confused. Maybe you need to come to a conclusion. So I can change it in the next patch. > > Best regards, > Krzysztof > > . _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 3/4] clk: meson: s4: add s4 SoC peripheral clock controller driver and bindings 2022-11-23 11:22 ` Yu Tu (?) @ 2022-11-23 13:06 ` Krzysztof Kozlowski -1 siblings, 0 replies; 109+ messages in thread From: Krzysztof Kozlowski @ 2022-11-23 13:06 UTC (permalink / raw) To: Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 12:22, Yu Tu wrote: > > > On 2022/11/23 18:09, Krzysztof Kozlowski wrote: >> [ EXTERNAL EMAIL ] >> >> On 23/11/2022 03:13, Yu Tu wrote: >>> Add the peripherals clock controller found and bindings in the s4 SoC family. >>> >>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>> --- >>> .../clock/amlogic,s4-peripherals-clkc.yaml | 105 + >> >> No, this is total mess now. >> >> Additionally, you received a lot of feedback but your changelog says only: >> "V3 -> V4: change format and clock flags." >> so you ignored entire feedback? >> >> That's not the way to work with patches. > > Hi Krzysztof, > You can check the previous email reply. Now I don't know who to follow > your advice or Jerome's. I'm confused. Maybe you need to come to a > conclusion. So I can change it in the next patch. I don't understand your comment. You received a lot of things to change for your v3. You said here "change format and clock flagS", so all other feedbacks from me were ignored? They were not contradicting to Jerome's comments, so either you implement them and mention this in changelog, or you keep discussing. Best regards, Krzysztof _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 3/4] clk: meson: s4: add s4 SoC peripheral clock controller driver and bindings @ 2022-11-23 13:06 ` Krzysztof Kozlowski 0 siblings, 0 replies; 109+ messages in thread From: Krzysztof Kozlowski @ 2022-11-23 13:06 UTC (permalink / raw) To: Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 12:22, Yu Tu wrote: > > > On 2022/11/23 18:09, Krzysztof Kozlowski wrote: >> [ EXTERNAL EMAIL ] >> >> On 23/11/2022 03:13, Yu Tu wrote: >>> Add the peripherals clock controller found and bindings in the s4 SoC family. >>> >>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>> --- >>> .../clock/amlogic,s4-peripherals-clkc.yaml | 105 + >> >> No, this is total mess now. >> >> Additionally, you received a lot of feedback but your changelog says only: >> "V3 -> V4: change format and clock flags." >> so you ignored entire feedback? >> >> That's not the way to work with patches. > > Hi Krzysztof, > You can check the previous email reply. Now I don't know who to follow > your advice or Jerome's. I'm confused. Maybe you need to come to a > conclusion. So I can change it in the next patch. I don't understand your comment. You received a lot of things to change for your v3. You said here "change format and clock flagS", so all other feedbacks from me were ignored? They were not contradicting to Jerome's comments, so either you implement them and mention this in changelog, or you keep discussing. Best regards, Krzysztof ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 3/4] clk: meson: s4: add s4 SoC peripheral clock controller driver and bindings @ 2022-11-23 13:06 ` Krzysztof Kozlowski 0 siblings, 0 replies; 109+ messages in thread From: Krzysztof Kozlowski @ 2022-11-23 13:06 UTC (permalink / raw) To: Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 12:22, Yu Tu wrote: > > > On 2022/11/23 18:09, Krzysztof Kozlowski wrote: >> [ EXTERNAL EMAIL ] >> >> On 23/11/2022 03:13, Yu Tu wrote: >>> Add the peripherals clock controller found and bindings in the s4 SoC family. >>> >>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>> --- >>> .../clock/amlogic,s4-peripherals-clkc.yaml | 105 + >> >> No, this is total mess now. >> >> Additionally, you received a lot of feedback but your changelog says only: >> "V3 -> V4: change format and clock flags." >> so you ignored entire feedback? >> >> That's not the way to work with patches. > > Hi Krzysztof, > You can check the previous email reply. Now I don't know who to follow > your advice or Jerome's. I'm confused. Maybe you need to come to a > conclusion. So I can change it in the next patch. I don't understand your comment. You received a lot of things to change for your v3. You said here "change format and clock flagS", so all other feedbacks from me were ignored? They were not contradicting to Jerome's comments, so either you implement them and mention this in changelog, or you keep discussing. Best regards, Krzysztof _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 3/4] clk: meson: s4: add s4 SoC peripheral clock controller driver and bindings 2022-11-23 13:06 ` Krzysztof Kozlowski (?) @ 2022-11-23 14:08 ` Yu Tu -1 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 14:08 UTC (permalink / raw) To: Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang Hi Krzysztof, On 2022/11/23 21:06, Krzysztof Kozlowski wrote: > [ EXTERNAL EMAIL ] > > On 23/11/2022 12:22, Yu Tu wrote: >> >> >> On 2022/11/23 18:09, Krzysztof Kozlowski wrote: >>> [ EXTERNAL EMAIL ] >>> >>> On 23/11/2022 03:13, Yu Tu wrote: >>>> Add the peripherals clock controller found and bindings in the s4 SoC family. >>>> >>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>> --- >>>> .../clock/amlogic,s4-peripherals-clkc.yaml | 105 + >>> >>> No, this is total mess now. >>> >>> Additionally, you received a lot of feedback but your changelog says only: >>> "V3 -> V4: change format and clock flags." >>> so you ignored entire feedback? >>> >>> That's not the way to work with patches. >> >> Hi Krzysztof, >> You can check the previous email reply. Now I don't know who to follow >> your advice or Jerome's. I'm confused. Maybe you need to come to a >> conclusion. So I can change it in the next patch. > > I don't understand your comment. You received a lot of things to change > for your v3. You said here "change format and clock flagS", so all other > feedbacks from me were ignored? They were not contradicting to Jerome's > comments, so either you implement them and mention this in changelog, or > you keep discussing. > I'm sorry I didn't write that clearly. The reality is that V4 I have changed some of the suggestions from Jerome. But there was a part that didn't agree before I sent V4, which Jerome chose to skip. Let's continue with V3, and then prepare this V5. > Best regards, > Krzysztof > > . _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 3/4] clk: meson: s4: add s4 SoC peripheral clock controller driver and bindings @ 2022-11-23 14:08 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 14:08 UTC (permalink / raw) To: Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang Hi Krzysztof, On 2022/11/23 21:06, Krzysztof Kozlowski wrote: > [ EXTERNAL EMAIL ] > > On 23/11/2022 12:22, Yu Tu wrote: >> >> >> On 2022/11/23 18:09, Krzysztof Kozlowski wrote: >>> [ EXTERNAL EMAIL ] >>> >>> On 23/11/2022 03:13, Yu Tu wrote: >>>> Add the peripherals clock controller found and bindings in the s4 SoC family. >>>> >>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>> --- >>>> .../clock/amlogic,s4-peripherals-clkc.yaml | 105 + >>> >>> No, this is total mess now. >>> >>> Additionally, you received a lot of feedback but your changelog says only: >>> "V3 -> V4: change format and clock flags." >>> so you ignored entire feedback? >>> >>> That's not the way to work with patches. >> >> Hi Krzysztof, >> You can check the previous email reply. Now I don't know who to follow >> your advice or Jerome's. I'm confused. Maybe you need to come to a >> conclusion. So I can change it in the next patch. > > I don't understand your comment. You received a lot of things to change > for your v3. You said here "change format and clock flagS", so all other > feedbacks from me were ignored? They were not contradicting to Jerome's > comments, so either you implement them and mention this in changelog, or > you keep discussing. > I'm sorry I didn't write that clearly. The reality is that V4 I have changed some of the suggestions from Jerome. But there was a part that didn't agree before I sent V4, which Jerome chose to skip. Let's continue with V3, and then prepare this V5. > Best regards, > Krzysztof > > . _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 3/4] clk: meson: s4: add s4 SoC peripheral clock controller driver and bindings @ 2022-11-23 14:08 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 14:08 UTC (permalink / raw) To: Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang Hi Krzysztof, On 2022/11/23 21:06, Krzysztof Kozlowski wrote: > [ EXTERNAL EMAIL ] > > On 23/11/2022 12:22, Yu Tu wrote: >> >> >> On 2022/11/23 18:09, Krzysztof Kozlowski wrote: >>> [ EXTERNAL EMAIL ] >>> >>> On 23/11/2022 03:13, Yu Tu wrote: >>>> Add the peripherals clock controller found and bindings in the s4 SoC family. >>>> >>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>> --- >>>> .../clock/amlogic,s4-peripherals-clkc.yaml | 105 + >>> >>> No, this is total mess now. >>> >>> Additionally, you received a lot of feedback but your changelog says only: >>> "V3 -> V4: change format and clock flags." >>> so you ignored entire feedback? >>> >>> That's not the way to work with patches. >> >> Hi Krzysztof, >> You can check the previous email reply. Now I don't know who to follow >> your advice or Jerome's. I'm confused. Maybe you need to come to a >> conclusion. So I can change it in the next patch. > > I don't understand your comment. You received a lot of things to change > for your v3. You said here "change format and clock flagS", so all other > feedbacks from me were ignored? They were not contradicting to Jerome's > comments, so either you implement them and mention this in changelog, or > you keep discussing. > I'm sorry I didn't write that clearly. The reality is that V4 I have changed some of the suggestions from Jerome. But there was a part that didn't agree before I sent V4, which Jerome chose to skip. Let's continue with V3, and then prepare this V5. > Best regards, > Krzysztof > > . ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 3/4] clk: meson: s4: add s4 SoC peripheral clock controller driver and bindings 2022-11-23 2:13 ` Yu Tu @ 2022-11-25 9:54 ` Jerome Brunet -1 siblings, 0 replies; 109+ messages in thread From: Jerome Brunet @ 2022-11-25 9:54 UTC (permalink / raw) To: Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On Wed 23 Nov 2022 at 10:13, Yu Tu <yu.tu@amlogic.com> wrote: > Add the peripherals clock controller found and bindings in the s4 SoC family. > > Signed-off-by: Yu Tu <yu.tu@amlogic.com> > --- > .../clock/amlogic,s4-peripherals-clkc.yaml | 105 + > drivers/clk/meson/Kconfig | 12 + > drivers/clk/meson/Makefile | 1 + > drivers/clk/meson/s4-peripherals.c | 3783 +++++++++++++++++ > drivers/clk/meson/s4-peripherals.h | 218 + > .../clock/amlogic,s4-peripherals-clkc.h | 131 + > 6 files changed, 4250 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml > create mode 100644 drivers/clk/meson/s4-peripherals.c > create mode 100644 drivers/clk/meson/s4-peripherals.h > create mode 100644 include/dt-bindings/clock/amlogic,s4-peripherals-clkc.h > > diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml > new file mode 100644 > index 000000000000..d1ea05ab7ec9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml > @@ -0,0 +1,105 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/clock/amlogic,s4-peripherals-clkc.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Amlogic Meson S serials Peripherals Clock Controller > + > +maintainers: > + - Neil Armstrong <narmstrong@baylibre.com> > + - Jerome Brunet <jbrunet@baylibre.com> > + - Yu Tu <yu.hu@amlogic.com> > + > + > +properties: > + compatible: > + const: amlogic,s4-peripherals-clkc > + > + reg: > + maxItems: 1 > + > + clocks: > + items: > + - description: input fixed pll div2 > + - description: input fixed pll div2p5 > + - description: input fixed pll div3 > + - description: input fixed pll div4 > + - description: input fixed pll div5 > + - description: input fixed pll div7 > + - description: input hifi pll > + - description: input gp0 pll > + - description: input mpll0 > + - description: input mpll1 > + - description: input mpll2 > + - description: input mpll3 > + - description: input hdmi pll > + - description: input oscillator (usually at 24MHz) > + - description: input external 32kHz reference (optional) > + > + clock-names: > + items: > + - const: fclk_div2 > + - const: fclk_div2p5 > + - const: fclk_div3 > + - const: fclk_div4 > + - const: fclk_div5 > + - const: fclk_div7 > + - const: hifi_pll > + - const: gp0_pll > + - const: mpll0 > + - const: mpll1 > + - const: mpll2 > + - const: mpll3 > + - const: hdmi_pll > + - const: xtal > + - const: ext_32k > + > + "#clock-cells": > + const: 1 > + > +required: > + - compatible > + - reg > + - clocks > + - clock-names > + - "#clock-cells" > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> > + > + /* 32KHz reference crystal */ > + ext_32k: ref32k { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <32000>; > + }; > + > + clkc_periphs: clock-controller@fe000000 { > + compatible = "amlogic,s4-peripherals-clkc"; > + reg = <0xfe000000 0x49c>; > + clocks = <&clkc_pll 3>, > + <&clkc_pll 13>, > + <&clkc_pll 5>, > + <&clkc_pll 7>, > + <&clkc_pll 9>, > + <&clkc_pll 11>, > + <&clkc_pll 17>, > + <&clkc_pll 15>, > + <&clkc_pll 25>, > + <&clkc_pll 27>, > + <&clkc_pll 29>, > + <&clkc_pll 31>, > + <&clkc_pll 20>, > + <&xtal>, > + <&ext_32k>; > + clock-names = "fclk_div2", "fclk_div2p5", "fclk_div3", "fclk_div4", > + "fclk_div5", "fclk_div7", "hifi_pll", "gp0_pll", > + "mpll0", "mpll1", "mpll2", "mpll3", "hdmi_pll", "xtal", > + "ext_32k"; > + #clock-cells = <1>; > + }; > +... > diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig > index a663c90a3f3b..a6eb9fa15c74 100644 > --- a/drivers/clk/meson/Kconfig > +++ b/drivers/clk/meson/Kconfig > @@ -128,4 +128,16 @@ config COMMON_CLK_S4_PLL > aka s4. Amlogic S805X2 and S905Y4 devices include AQ222 and AQ229. > Say Y if you want the board to work, because plls are the parent of most > peripherals. > + > +config COMMON_CLK_S4 > + tristate "S4 SoC Peripherals clock controllers support" > + depends on ARM64 > + default y > + select COMMON_CLK_MESON_REGMAP > + select COMMON_CLK_MESON_DUALDIV > + select COMMON_CLK_MESON_VID_PLL_DIV > + help > + Support for the Peripherals clock controller on Amlogic S805X2 and S905Y4 > + devices, aka s4. Amlogic S805X2 and S905Y4 devices include AQ222 and AQ229. > + Say Y if you want peripherals to work. > endmenu > diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile > index 376f49cc13f1..c9130afccb48 100644 > --- a/drivers/clk/meson/Makefile > +++ b/drivers/clk/meson/Makefile > @@ -20,3 +20,4 @@ obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o > obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o > obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o > obj-$(CONFIG_COMMON_CLK_S4_PLL) += s4-pll.o > +obj-$(CONFIG_COMMON_CLK_S4) += s4-peripherals.o > diff --git a/drivers/clk/meson/s4-peripherals.c b/drivers/clk/meson/s4-peripherals.c > new file mode 100644 > index 000000000000..8ce5156d3510 > --- /dev/null > +++ b/drivers/clk/meson/s4-peripherals.c > @@ -0,0 +1,3783 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Amlogic Meson-S4 Peripherals Clock Controller Driver > + * > + * Copyright (c) 2021 Amlogic, inc. > + * Author: Yu Tu <yu.tu@amlogic.com> > + */ > + > +#include <linux/clk-provider.h> > +#include <linux/of_device.h> > +#include <linux/platform_device.h> > + > +#include "clk-regmap.h" > +#include "vid-pll-div.h" > +#include "clk-dualdiv.h" > +#include "s4-peripherals.h" > + > +static struct clk_regmap s4_rtc_32k_by_oscin_clkin = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_RTC_BY_OSCIN_CTRL0, > + .bit_idx = 31, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "rtc_32k_by_oscin_clkin", > + .ops = &clk_regmap_gate_ops, > + .parent_data = (const struct clk_parent_data []) { > + { .fw_name = "xtal", } > + }, > + .num_parents = 1, > + }, > +}; > + > +static const struct meson_clk_dualdiv_param s4_32k_div_table[] = { > + { > + .dual = 1, > + .n1 = 733, > + .m1 = 8, > + .n2 = 732, > + .m2 = 11, > + }, > + {} > +}; > + > +static struct clk_regmap s4_rtc_32k_by_oscin_div = { > + .data = &(struct meson_clk_dualdiv_data){ > + .n1 = { > + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL0, > + .shift = 0, > + .width = 12, > + }, > + .n2 = { > + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL0, > + .shift = 12, > + .width = 12, > + }, > + .m1 = { > + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL1, > + .shift = 0, > + .width = 12, > + }, > + .m2 = { > + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL1, > + .shift = 12, > + .width = 12, > + }, > + .dual = { > + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL0, > + .shift = 28, > + .width = 1, > + }, > + .table = s4_32k_div_table, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "rtc_32k_by_oscin_div", > + .ops = &meson_clk_dualdiv_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_rtc_32k_by_oscin_clkin.hw > + }, > + .num_parents = 1, > + }, > +}; > + > +static struct clk_regmap s4_rtc_32k_by_oscin_sel = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_RTC_BY_OSCIN_CTRL1, > + .mask = 0x1, > + .shift = 24, > + .flags = CLK_MUX_ROUND_CLOSEST, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "rtc_32k_by_oscin_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_rtc_32k_by_oscin_div.hw, > + &s4_rtc_32k_by_oscin_clkin.hw, > + }, > + .num_parents = 2, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_rtc_32k_by_oscin = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_RTC_BY_OSCIN_CTRL0, > + .bit_idx = 30, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "rtc_32k_by_oscin", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_rtc_32k_by_oscin_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +/* > + * This RTC clock can be supplied by an external 32KHz crystal oscillator. > + * If it is used, it should be documented in using fw_name and documented in the > + * Bindings. Not currently in use on this board, so skip it. > + */ > +static u32 rtc_clk_sel[] = { 0, 1 }; No reason to do that > +static const struct clk_parent_data rtc_clk_sel_parent_data[] = { > + { .hw = &s4_rtc_32k_by_oscin.hw }, > + { .hw = &s4_rtc_32k_by_oscin_div.hw }, > + { .fw_name = "ext_32k", } > +}; > + > +static struct clk_regmap s4_rtc_clk = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_RTC_CTRL, > + .mask = 0x3, > + .shift = 0, > + .table = rtc_clk_sel, > + .flags = CLK_MUX_ROUND_CLOSEST, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "rtc_clk_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_data = rtc_clk_sel_parent_data, > + .num_parents = 2, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +/* The index 5 is AXI_CLK, which is dedicated to AXI. So skip it. */ > +static u32 mux_table_sys_ab_clk_sel[] = { 0, 1, 2, 3, 4, 6, 7 }; > +static const struct clk_parent_data sys_ab_clk_parent_data[] = { > + { .fw_name = "xtal" }, > + { .fw_name = "fclk_div2" }, > + { .fw_name = "fclk_div3" }, > + { .fw_name = "fclk_div4" }, > + { .fw_name = "fclk_div5" }, > + { .fw_name = "fclk_div7" }, > + { .hw = &s4_rtc_clk.hw } > +}; > + > +static struct clk_regmap s4_sysclk_b_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_SYS_CLK_CTRL0, > + .mask = 0x7, > + .shift = 26, > + .table = mux_table_sys_ab_clk_sel, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "sysclk_b_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_data = sys_ab_clk_parent_data, > + .num_parents = ARRAY_SIZE(sys_ab_clk_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_sysclk_b_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_SYS_CLK_CTRL0, > + .shift = 16, > + .width = 10, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "sysclk_b_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_sysclk_b_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_sysclk_b = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_SYS_CLK_CTRL0, > + .bit_idx = 29, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "sysclk_b", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_sysclk_b_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_sysclk_a_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_SYS_CLK_CTRL0, > + .mask = 0x7, > + .shift = 10, > + .table = mux_table_sys_ab_clk_sel, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "sysclk_a_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_data = sys_ab_clk_parent_data, > + .num_parents = ARRAY_SIZE(sys_ab_clk_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_sysclk_a_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_SYS_CLK_CTRL0, > + .shift = 0, > + .width = 10, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "sysclk_a_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_sysclk_a_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_sysclk_a = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_SYS_CLK_CTRL0, > + .bit_idx = 13, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "sysclk_a", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_sysclk_a_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_sys_clk = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_SYS_CLK_CTRL0, > + .mask = 0x1, > + .shift = 31, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "sys_clk", > + .ops = &clk_regmap_mux_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_sysclk_a.hw, > + &s4_sysclk_b.hw > + }, > + .num_parents = 2, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_ceca_32k_clkin = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_CECA_CTRL0, > + .bit_idx = 31, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "ceca_32k_clkin", > + .ops = &clk_regmap_gate_ops, > + .parent_data = (const struct clk_parent_data []) { > + { .fw_name = "xtal", } > + }, > + .num_parents = 1, > + }, > +}; > + > +static struct clk_regmap s4_ceca_32k_div = { > + .data = &(struct meson_clk_dualdiv_data){ > + .n1 = { > + .reg_off = CLKCTRL_CECA_CTRL0, > + .shift = 0, > + .width = 12, > + }, > + .n2 = { > + .reg_off = CLKCTRL_CECA_CTRL0, > + .shift = 12, > + .width = 12, > + }, > + .m1 = { > + .reg_off = CLKCTRL_CECA_CTRL1, > + .shift = 0, > + .width = 12, > + }, > + .m2 = { > + .reg_off = CLKCTRL_CECA_CTRL1, > + .shift = 12, > + .width = 12, > + }, > + .dual = { > + .reg_off = CLKCTRL_CECA_CTRL0, > + .shift = 28, > + .width = 1, > + }, > + .table = s4_32k_div_table, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "ceca_32k_div", > + .ops = &meson_clk_dualdiv_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_ceca_32k_clkin.hw > + }, > + .num_parents = 1, > + }, > +}; > + > +static struct clk_regmap s4_ceca_32k_sel_pre = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_CECA_CTRL1, > + .mask = 0x1, > + .shift = 24, > + .flags = CLK_MUX_ROUND_CLOSEST, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "ceca_32k_sel_pre", > + .ops = &clk_regmap_mux_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_ceca_32k_div.hw, > + &s4_ceca_32k_clkin.hw > + }, > + .num_parents = 2, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_ceca_32k_sel = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_CECA_CTRL1, > + .mask = 0x1, > + .shift = 31, > + .flags = CLK_MUX_ROUND_CLOSEST, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "ceca_32k_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_ceca_32k_sel_pre.hw, > + &s4_rtc_clk.hw > + }, > + .num_parents = 2, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_ceca_32k_clkout = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_CECA_CTRL0, > + .bit_idx = 30, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "ceca_32k_clkout", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_ceca_32k_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_cecb_32k_clkin = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_CECB_CTRL0, > + .bit_idx = 31, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "cecb_32k_clkin", > + .ops = &clk_regmap_gate_ops, > + .parent_data = (const struct clk_parent_data []) { > + { .fw_name = "xtal", } > + }, > + .num_parents = 1, > + }, > +}; > + > +static struct clk_regmap s4_cecb_32k_div = { > + .data = &(struct meson_clk_dualdiv_data){ > + .n1 = { > + .reg_off = CLKCTRL_CECB_CTRL0, > + .shift = 0, > + .width = 12, > + }, > + .n2 = { > + .reg_off = CLKCTRL_CECB_CTRL0, > + .shift = 12, > + .width = 12, > + }, > + .m1 = { > + .reg_off = CLKCTRL_CECB_CTRL1, > + .shift = 0, > + .width = 12, > + }, > + .m2 = { > + .reg_off = CLKCTRL_CECB_CTRL1, > + .shift = 12, > + .width = 12, > + }, > + .dual = { > + .reg_off = CLKCTRL_CECB_CTRL0, > + .shift = 28, > + .width = 1, > + }, > + .table = s4_32k_div_table, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "cecb_32k_div", > + .ops = &meson_clk_dualdiv_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_cecb_32k_clkin.hw > + }, > + .num_parents = 1, > + }, > +}; > + > +static struct clk_regmap s4_cecb_32k_sel_pre = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_CECB_CTRL1, > + .mask = 0x1, > + .shift = 24, > + .flags = CLK_MUX_ROUND_CLOSEST, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "cecb_32k_sel_pre", > + .ops = &clk_regmap_mux_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_cecb_32k_div.hw, > + &s4_cecb_32k_clkin.hw > + }, > + .num_parents = 2, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_cecb_32k_sel = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_CECB_CTRL1, > + .mask = 0x1, > + .shift = 31, > + .flags = CLK_MUX_ROUND_CLOSEST, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "cecb_32k_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_cecb_32k_sel_pre.hw, > + &s4_rtc_clk.hw > + }, > + .num_parents = 2, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_cecb_32k_clkout = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_CECB_CTRL0, > + .bit_idx = 30, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "cecb_32k_clkout", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_cecb_32k_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static const struct clk_parent_data s4_sc_parent_data[] = { > + { .fw_name = "fclk_div4" }, > + { .fw_name = "fclk_div3" }, > + { .fw_name = "fclk_div5" }, > + { .fw_name = "xtal", } > +}; > + > +static struct clk_regmap s4_sc_clk_mux = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_SC_CLK_CTRL, > + .mask = 0x3, > + .shift = 9, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "sc_clk_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_sc_parent_data, > + .num_parents = ARRAY_SIZE(s4_sc_parent_data), > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_sc_clk_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_SC_CLK_CTRL, > + .shift = 0, > + .width = 8, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "sc_clk_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_sc_clk_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_sc_clk_gate = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_SC_CLK_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "sc_clk_gate", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_sc_clk_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_12_24M_clk_gate = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_CLK12_24_CTRL, > + .bit_idx = 11, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "12_24m_gate", > + .ops = &clk_regmap_gate_ops, > + .parent_data = (const struct clk_parent_data []) { > + { .fw_name = "xtal", } > + }, > + .num_parents = 1, > + }, > +}; > + > +static struct clk_fixed_factor s4_12M_clk_div = { > + .mult = 1, > + .div = 2, > + .hw.init = &(struct clk_init_data){ > + .name = "12M", > + .ops = &clk_fixed_factor_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_12_24M_clk_gate.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_12_24M_clk = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_CLK12_24_CTRL, > + .mask = 0x1, > + .shift = 10, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "12_24m", > + .ops = &clk_regmap_mux_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_12_24M_clk_gate.hw, > + &s4_12M_clk_div.hw, > + }, > + .num_parents = 2, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +/* Video Clocks */ > +static struct clk_regmap s4_vid_pll_div = { > + .data = &(struct meson_vid_pll_div_data){ > + .val = { > + .reg_off = CLKCTRL_VID_PLL_CLK_DIV, > + .shift = 0, > + .width = 15, > + }, > + .sel = { > + .reg_off = CLKCTRL_VID_PLL_CLK_DIV, > + .shift = 16, > + .width = 2, > + }, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vid_pll_div", > + /* Same to g12a */ > + .ops = &meson_vid_pll_div_ro_ops, Please add an helpful explanation. 'Same to g12a' is not helpful. > + .parent_data = (const struct clk_parent_data []) { > + { .fw_name = "hdmi_pll", } > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vid_pll_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VID_PLL_CLK_DIV, > + .mask = 0x1, > + .shift = 18, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vid_pll_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_data = (const struct clk_parent_data []) { > + { .hw = &s4_vid_pll_div.hw }, > + { .fw_name = "hdmi_pll", } > + }, > + .num_parents = 2, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vid_pll = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VID_PLL_CLK_DIV, > + .bit_idx = 19, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vid_pll", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vid_pll_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static const struct clk_parent_data s4_vclk_parent_data[] = { > + { .hw = &s4_vid_pll.hw }, > + { .fw_name = "gp0_pll", }, > + { .fw_name = "hifi_pll", }, > + { .fw_name = "mpll1", }, > + { .fw_name = "fclk_div3", }, > + { .fw_name = "fclk_div4", }, > + { .fw_name = "fclk_div5", }, > + { .fw_name = "fclk_div7", }, > +}; > + > +static struct clk_regmap s4_vclk_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VID_CLK_CTRL, > + .mask = 0x7, > + .shift = 16, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vclk_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_vclk_parent_data, > + .num_parents = ARRAY_SIZE(s4_vclk_parent_data), > + }, You are stopping rate propagation here. It deserves an explanation. Same goes below. > +}; > + > +static struct clk_regmap s4_vclk2_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VIID_CLK_CTRL, > + .mask = 0x7, > + .shift = 16, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vclk2_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_vclk_parent_data, > + .num_parents = ARRAY_SIZE(s4_vclk_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_vclk_input = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VID_CLK_DIV, > + .bit_idx = 16, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vclk_input", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vclk_sel.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vclk2_input = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VIID_CLK_DIV, > + .bit_idx = 16, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vclk2_input", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2_sel.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vclk_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_VID_CLK_DIV, > + .shift = 0, > + .width = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vclk_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vclk_input.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vclk2_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_VIID_CLK_DIV, > + .shift = 0, > + .width = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vclk2_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vclk2_input.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vclk = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VID_CLK_CTRL, > + .bit_idx = 19, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vclk", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vclk_div.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vclk2 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VIID_CLK_CTRL, > + .bit_idx = 19, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vclk2", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2_div.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vclk_div1 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VID_CLK_CTRL, > + .bit_idx = 0, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vclk_div1", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vclk_div2_en = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VID_CLK_CTRL, > + .bit_idx = 1, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vclk_div2_en", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vclk_div4_en = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VID_CLK_CTRL, > + .bit_idx = 2, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vclk_div4_en", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vclk_div6_en = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VID_CLK_CTRL, > + .bit_idx = 3, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vclk_div6_en", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vclk_div12_en = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VID_CLK_CTRL, > + .bit_idx = 4, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vclk_div12_en", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vclk2_div1 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VIID_CLK_CTRL, > + .bit_idx = 0, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vclk2_div1", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vclk2_div2_en = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VIID_CLK_CTRL, > + .bit_idx = 1, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vclk2_div2_en", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vclk2_div4_en = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VIID_CLK_CTRL, > + .bit_idx = 2, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vclk2_div4_en", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vclk2_div6_en = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VIID_CLK_CTRL, > + .bit_idx = 3, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vclk2_div6_en", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vclk2_div12_en = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VIID_CLK_CTRL, > + .bit_idx = 4, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vclk2_div12_en", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_fixed_factor s4_vclk_div2 = { > + .mult = 1, > + .div = 2, > + .hw.init = &(struct clk_init_data){ > + .name = "vclk_div2", > + .ops = &clk_fixed_factor_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vclk_div2_en.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_fixed_factor s4_vclk_div4 = { > + .mult = 1, > + .div = 4, > + .hw.init = &(struct clk_init_data){ > + .name = "vclk_div4", > + .ops = &clk_fixed_factor_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vclk_div4_en.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_fixed_factor s4_vclk_div6 = { > + .mult = 1, > + .div = 6, > + .hw.init = &(struct clk_init_data){ > + .name = "vclk_div6", > + .ops = &clk_fixed_factor_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vclk_div6_en.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_fixed_factor s4_vclk_div12 = { > + .mult = 1, > + .div = 12, > + .hw.init = &(struct clk_init_data){ > + .name = "vclk_div12", > + .ops = &clk_fixed_factor_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vclk_div12_en.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_fixed_factor s4_vclk2_div2 = { > + .mult = 1, > + .div = 2, > + .hw.init = &(struct clk_init_data){ > + .name = "vclk2_div2", > + .ops = &clk_fixed_factor_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vclk2_div2_en.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_fixed_factor s4_vclk2_div4 = { > + .mult = 1, > + .div = 4, > + .hw.init = &(struct clk_init_data){ > + .name = "vclk2_div4", > + .ops = &clk_fixed_factor_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vclk2_div4_en.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_fixed_factor s4_vclk2_div6 = { > + .mult = 1, > + .div = 6, > + .hw.init = &(struct clk_init_data){ > + .name = "vclk2_div6", > + .ops = &clk_fixed_factor_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vclk2_div6_en.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_fixed_factor s4_vclk2_div12 = { > + .mult = 1, > + .div = 12, > + .hw.init = &(struct clk_init_data){ > + .name = "vclk2_div12", > + .ops = &clk_fixed_factor_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vclk2_div12_en.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +/* The 5,6,7 indexes corresponds to no real clock, so there are not used. */ > +static u32 mux_table_cts_sel[] = { 0, 1, 2, 3, 4, 8, 9, 10, 11, 12 }; > +static const struct clk_hw *s4_cts_parent_hws[] = { > + &s4_vclk_div1.hw, > + &s4_vclk_div2.hw, > + &s4_vclk_div4.hw, > + &s4_vclk_div6.hw, > + &s4_vclk_div12.hw, > + &s4_vclk2_div1.hw, > + &s4_vclk2_div2.hw, > + &s4_vclk2_div4.hw, > + &s4_vclk2_div6.hw, > + &s4_vclk2_div12.hw > +}; > + > +static struct clk_regmap s4_cts_enci_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VID_CLK_DIV, > + .mask = 0xf, > + .shift = 28, > + .table = mux_table_cts_sel, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "cts_enci_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_hws = s4_cts_parent_hws, > + .num_parents = ARRAY_SIZE(s4_cts_parent_hws), > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_cts_encp_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VID_CLK_DIV, > + .mask = 0xf, > + .shift = 20, > + .table = mux_table_cts_sel, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "cts_encp_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_hws = s4_cts_parent_hws, > + .num_parents = ARRAY_SIZE(s4_cts_parent_hws), > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_cts_vdac_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VIID_CLK_DIV, > + .mask = 0xf, > + .shift = 28, > + .table = mux_table_cts_sel, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "cts_vdac_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_hws = s4_cts_parent_hws, > + .num_parents = ARRAY_SIZE(s4_cts_parent_hws), > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +/* The 5,6,7 indexes corresponds to no real clock, so there are not used. */ > +static u32 mux_table_hdmi_tx_sel[] = { 0, 1, 2, 3, 4, 8, 9, 10, 11, 12 }; > +static const struct clk_hw *s4_cts_hdmi_tx_parent_hws[] = { > + &s4_vclk_div1.hw, > + &s4_vclk_div2.hw, > + &s4_vclk_div4.hw, > + &s4_vclk_div6.hw, > + &s4_vclk_div12.hw, > + &s4_vclk2_div1.hw, > + &s4_vclk2_div2.hw, > + &s4_vclk2_div4.hw, > + &s4_vclk2_div6.hw, > + &s4_vclk2_div12.hw > +}; > + > +static struct clk_regmap s4_hdmi_tx_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_HDMI_CLK_CTRL, > + .mask = 0xf, > + .shift = 16, > + .table = mux_table_hdmi_tx_sel, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "hdmi_tx_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_hws = s4_cts_hdmi_tx_parent_hws, > + .num_parents = ARRAY_SIZE(s4_cts_hdmi_tx_parent_hws), > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_cts_enci = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VID_CLK_CTRL2, > + .bit_idx = 0, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "cts_enci", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_cts_enci_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_cts_encp = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VID_CLK_CTRL2, > + .bit_idx = 2, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "cts_encp", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_cts_encp_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_cts_vdac = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VID_CLK_CTRL2, > + .bit_idx = 4, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "cts_vdac", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_cts_vdac_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_hdmi_tx = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VID_CLK_CTRL2, > + .bit_idx = 5, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "hdmi_tx", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_hdmi_tx_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +/* HDMI Clocks */ > +static const struct clk_parent_data s4_hdmi_parent_data[] = { > + { .fw_name = "xtal", }, > + { .fw_name = "fclk_div4", }, > + { .fw_name = "fclk_div3", }, > + { .fw_name = "fclk_div5", } > +}; > + > +static struct clk_regmap s4_hdmi_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_HDMI_CLK_CTRL, > + .mask = 0x3, > + .shift = 9, > + .flags = CLK_MUX_ROUND_CLOSEST, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "hdmi_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_hdmi_parent_data, > + .num_parents = ARRAY_SIZE(s4_hdmi_parent_data), > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_hdmi_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_HDMI_CLK_CTRL, > + .shift = 0, > + .width = 7, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "hdmi_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_hdmi_sel.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_hdmi = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_HDMI_CLK_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "hdmi", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_hdmi_div.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_ts_clk_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_TS_CLK_CTRL, > + .shift = 0, > + .width = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "ts_clk_div", > + .ops = &clk_regmap_divider_ops, > + .parent_data = &(const struct clk_parent_data) { > + .fw_name = "xtal", > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_ts_clk_gate = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_TS_CLK_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "ts_clk", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_ts_clk_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +/* > + * The MALI IP is clocked by two identical clocks (mali_0 and mali_1) > + * muxed by a glitch-free switch. The CCF can manage this glitch-free > + * mux because it does top-to-bottom updates the each clock tree and > + * switches to the "inactive" one when CLK_SET_RATE_GATE is set. > + */ > +static const struct clk_parent_data s4_mali_0_1_parent_data[] = { > + { .fw_name = "xtal", }, > + { .fw_name = "gp0_pll", }, > + { .fw_name = "hifi_pll", }, > + { .fw_name = "fclk_div2p5", }, > + { .fw_name = "fclk_div3", }, > + { .fw_name = "fclk_div4", }, > + { .fw_name = "fclk_div5", }, > + { .fw_name = "fclk_div7", } > +}; > + > +static struct clk_regmap s4_mali_0_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_MALI_CLK_CTRL, > + .mask = 0x7, > + .shift = 9, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "mali_0_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_mali_0_1_parent_data, > + .num_parents = ARRAY_SIZE(s4_mali_0_1_parent_data), > + /* > + * Don't request the parent to change the rate because > + * all GPU frequencies can be derived from the fclk_* > + * clocks and one special GP0_PLL setting. This is > + * important because we need the MPLL clocks for audio. > + */ > + .flags = 0, > + }, > +}; > + > +static struct clk_regmap s4_mali_0_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_MALI_CLK_CTRL, > + .shift = 0, > + .width = 7, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "mali_0_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_mali_0_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_mali_0 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_MALI_CLK_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "mali_0", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_mali_0_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_mali_1_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_MALI_CLK_CTRL, > + .mask = 0x7, > + .shift = 25, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "mali_1_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_mali_0_1_parent_data, > + .num_parents = ARRAY_SIZE(s4_mali_0_1_parent_data), > + .flags = 0, > + }, > +}; > + > +static struct clk_regmap s4_mali_1_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_MALI_CLK_CTRL, > + .shift = 16, > + .width = 7, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "mali_1_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_mali_1_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_mali_1 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_MALI_CLK_CTRL, > + .bit_idx = 24, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "mali_1", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_mali_1_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static const struct clk_hw *s4_mali_parent_hws[] = { > + &s4_mali_0.hw, > + &s4_mali_1.hw > +}; > + > +static struct clk_regmap s4_mali_mux = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_MALI_CLK_CTRL, > + .mask = 1, > + .shift = 31, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "mali", > + .ops = &clk_regmap_mux_ops, > + .parent_hws = s4_mali_parent_hws, > + .num_parents = 2, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +/* VDEC clocks */ > +static const struct clk_parent_data s4_dec_parent_data[] = { > + { .fw_name = "fclk_div2p5", }, > + { .fw_name = "fclk_div3", }, > + { .fw_name = "fclk_div4", }, > + { .fw_name = "fclk_div5", }, > + { .fw_name = "fclk_div7", }, > + { .fw_name = "hifi_pll", }, > + { .fw_name = "gp0_pll", }, > + { .fw_name = "xtal", } > +}; > + > +static struct clk_regmap s4_vdec_p0_mux = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VDEC_CLK_CTRL, > + .mask = 0x7, > + .shift = 9, > + .flags = CLK_MUX_ROUND_CLOSEST, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vdec_p0_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_dec_parent_data, > + .num_parents = ARRAY_SIZE(s4_dec_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_vdec_p0_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_VDEC_CLK_CTRL, > + .shift = 0, > + .width = 7, > + .flags = CLK_DIVIDER_ROUND_CLOSEST, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vdec_p0_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vdec_p0_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vdec_p0 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VDEC_CLK_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vdec_p0", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vdec_p0_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vdec_p1_mux = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VDEC3_CLK_CTRL, > + .mask = 0x7, > + .shift = 9, > + .flags = CLK_MUX_ROUND_CLOSEST, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vdec_p1_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_dec_parent_data, > + .num_parents = ARRAY_SIZE(s4_dec_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_vdec_p1_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_VDEC3_CLK_CTRL, > + .shift = 0, > + .width = 7, > + .flags = CLK_DIVIDER_ROUND_CLOSEST, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vdec_p1_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vdec_p1_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vdec_p1 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VDEC3_CLK_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vdec_p1", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vdec_p1_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static const struct clk_hw *s4_vdec_mux_parent_hws[] = { > + &s4_vdec_p0.hw, > + &s4_vdec_p1.hw > +}; > + > +static struct clk_regmap s4_vdec_mux = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VDEC3_CLK_CTRL, > + .mask = 0x1, > + .shift = 15, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vdec_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_hws = s4_vdec_mux_parent_hws, > + .num_parents = ARRAY_SIZE(s4_vdec_mux_parent_hws), > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_hevcf_p0_mux = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VDEC2_CLK_CTRL, > + .mask = 0x7, > + .shift = 9, > + .flags = CLK_MUX_ROUND_CLOSEST, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "hevcf_p0_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_dec_parent_data, > + .num_parents = ARRAY_SIZE(s4_dec_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_hevcf_p0_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_VDEC2_CLK_CTRL, > + .shift = 0, > + .width = 7, > + .flags = CLK_DIVIDER_ROUND_CLOSEST, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "hevcf_p0_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_hevcf_p0_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_hevcf_p0 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VDEC2_CLK_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "hevcf_p0_gate", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_hevcf_p0_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_hevcf_p1_mux = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VDEC4_CLK_CTRL, > + .mask = 0x7, > + .shift = 9, > + .flags = CLK_MUX_ROUND_CLOSEST, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "hevcf_p1_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_dec_parent_data, > + .num_parents = ARRAY_SIZE(s4_dec_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_hevcf_p1_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_VDEC4_CLK_CTRL, > + .shift = 0, > + .width = 7, > + .flags = CLK_DIVIDER_ROUND_CLOSEST, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "hevcf_p1_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_hevcf_p1_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_hevcf_p1 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VDEC4_CLK_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "hevcf_p1", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_hevcf_p1_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static const struct clk_hw *s4_hevcf_mux_parent_hws[] = { > + &s4_hevcf_p0.hw, > + &s4_hevcf_p1.hw > +}; > + > +static struct clk_regmap s4_hevcf_mux = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VDEC4_CLK_CTRL, > + .mask = 0x1, > + .shift = 15, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "hevcf", > + .ops = &clk_regmap_mux_ops, > + .parent_hws = s4_hevcf_mux_parent_hws, > + .num_parents = ARRAY_SIZE(s4_hevcf_mux_parent_hws), > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +/* VPU Clock */ > +static const struct clk_parent_data s4_vpu_parent_data[] = { > + { .fw_name = "fclk_div3", }, > + { .fw_name = "fclk_div4", }, > + { .fw_name = "fclk_div5", }, > + { .fw_name = "fclk_div7", }, > + { .fw_name = "mpll1", }, > + { .hw = &s4_vid_pll.hw }, > + { .fw_name = "hifi_pll", }, > + { .fw_name = "gp0_pll", }, > +}; > + > +static struct clk_regmap s4_vpu_0_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VPU_CLK_CTRL, > + .mask = 0x7, > + .shift = 9, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vpu_0_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_vpu_parent_data, > + .num_parents = ARRAY_SIZE(s4_vpu_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_vpu_0_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_VPU_CLK_CTRL, > + .shift = 0, > + .width = 7, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vpu_0_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vpu_0_sel.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vpu_0 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VPU_CLK_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vpu_0", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vpu_0_div.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vpu_1_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VPU_CLK_CTRL, > + .mask = 0x7, > + .shift = 25, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vpu_1_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_vpu_parent_data, > + .num_parents = ARRAY_SIZE(s4_vpu_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_vpu_1_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_VPU_CLK_CTRL, > + .shift = 16, > + .width = 7, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vpu_1_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vpu_1_sel.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vpu_1 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VPU_CLK_CTRL, > + .bit_idx = 24, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vpu_1", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vpu_1_div.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vpu = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VPU_CLK_CTRL, > + .mask = 1, > + .shift = 31, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vpu", > + .ops = &clk_regmap_mux_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vpu_0.hw, > + &s4_vpu_1.hw, > + }, > + .num_parents = 2, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static const struct clk_parent_data vpu_clkb_tmp_parent_data[] = { > + { .hw = &s4_vpu.hw }, > + { .fw_name = "fclk_div4", }, > + { .fw_name = "fclk_div5", }, > + { .fw_name = "fclk_div7", } > +}; > + > +static struct clk_regmap s4_vpu_clkb_tmp_mux = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VPU_CLKB_CTRL, > + .mask = 0x3, > + .shift = 20, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vpu_clkb_tmp_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = vpu_clkb_tmp_parent_data, > + .num_parents = ARRAY_SIZE(vpu_clkb_tmp_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_vpu_clkb_tmp_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_VPU_CLKB_CTRL, > + .shift = 16, > + .width = 4, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vpu_clkb_tmp_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vpu_clkb_tmp_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vpu_clkb_tmp = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VPU_CLKB_CTRL, > + .bit_idx = 24, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vpu_clkb_tmp", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vpu_clkb_tmp_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vpu_clkb_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_VPU_CLKB_CTRL, > + .shift = 0, > + .width = 8, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vpu_clkb_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vpu_clkb_tmp.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vpu_clkb = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VPU_CLKB_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vpu_clkb", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vpu_clkb_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static const struct clk_parent_data s4_vpu_clkc_parent_data[] = { > + { .fw_name = "fclk_div4", }, > + { .fw_name = "fclk_div3", }, > + { .fw_name = "fclk_div5", }, > + { .fw_name = "fclk_div7", }, > + { .fw_name = "mpll1", }, > + { .hw = &s4_vid_pll.hw }, > + { .fw_name = "mpll2", }, > + { .fw_name = "gp0_pll", }, > +}; > + > +static struct clk_regmap s4_vpu_clkc_p0_mux = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VPU_CLKC_CTRL, > + .mask = 0x7, > + .shift = 9, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vpu_clkc_p0_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_vpu_clkc_parent_data, > + .num_parents = ARRAY_SIZE(s4_vpu_clkc_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_vpu_clkc_p0_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_VPU_CLKC_CTRL, > + .shift = 0, > + .width = 7, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vpu_clkc_p0_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vpu_clkc_p0_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vpu_clkc_p0 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VPU_CLKC_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vpu_clkc_p0", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vpu_clkc_p0_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vpu_clkc_p1_mux = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VPU_CLKC_CTRL, > + .mask = 0x7, > + .shift = 25, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vpu_clkc_p1_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_vpu_clkc_parent_data, > + .num_parents = ARRAY_SIZE(s4_vpu_clkc_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_vpu_clkc_p1_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_VPU_CLKC_CTRL, > + .shift = 16, > + .width = 7, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vpu_clkc_p1_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vpu_clkc_p1_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vpu_clkc_p1 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VPU_CLKC_CTRL, > + .bit_idx = 24, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vpu_clkc_p1", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vpu_clkc_p1_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static const struct clk_hw *s4_vpu_mux_parent_hws[] = { > + &s4_vpu_clkc_p0.hw, > + &s4_vpu_clkc_p1.hw > +}; > + > +static struct clk_regmap s4_vpu_clkc_mux = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VPU_CLKC_CTRL, > + .mask = 0x1, > + .shift = 31, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vpu_clkc_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_hws = s4_vpu_mux_parent_hws, > + .num_parents = ARRAY_SIZE(s4_vpu_mux_parent_hws), > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +/* VAPB Clock */ > +static const struct clk_parent_data s4_vapb_parent_data[] = { > + { .fw_name = "fclk_div4", }, > + { .fw_name = "fclk_div3", }, > + { .fw_name = "fclk_div5", }, > + { .fw_name = "fclk_div7", }, > + { .fw_name = "mpll1", }, > + { .hw = &s4_vid_pll.hw }, > + { .fw_name = "mpll2", }, > + { .fw_name = "fclk_div2p5", }, > +}; > + > +static struct clk_regmap s4_vapb_0_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VAPBCLK_CTRL, > + .mask = 0x7, > + .shift = 9, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vapb_0_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_vapb_parent_data, > + .num_parents = ARRAY_SIZE(s4_vapb_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_vapb_0_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_VAPBCLK_CTRL, > + .shift = 0, > + .width = 7, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vapb_0_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vapb_0_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vapb_0 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VAPBCLK_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vapb_0", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vapb_0_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vapb_1_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VAPBCLK_CTRL, > + .mask = 0x7, > + .shift = 25, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vapb_1_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_vapb_parent_data, > + .num_parents = ARRAY_SIZE(s4_vapb_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_vapb_1_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_VAPBCLK_CTRL, > + .shift = 16, > + .width = 7, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vapb_1_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vapb_1_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vapb_1 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VAPBCLK_CTRL, > + .bit_idx = 24, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vapb_1", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vapb_1_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vapb = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VAPBCLK_CTRL, > + .mask = 1, > + .shift = 31, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vapb_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vapb_0.hw, > + &s4_vapb_1.hw > + }, > + .num_parents = 2, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_ge2d_gate = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VAPBCLK_CTRL, > + .bit_idx = 30, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "ge2d_clk", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vapb.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static const struct clk_parent_data s4_esmclk_parent_data[] = { > + { .fw_name = "fclk_div7", }, > + { .fw_name = "fclk_div4", }, > + { .fw_name = "fclk_div3", }, > + { .fw_name = "fclk_div5", }, > +}; > + > +static struct clk_regmap s4_hdcp22_esmclk_mux = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_HDCP22_CTRL, > + .mask = 0x3, > + .shift = 9, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "hdcp22_esmclk_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_esmclk_parent_data, > + .num_parents = ARRAY_SIZE(s4_esmclk_parent_data), > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_hdcp22_esmclk_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_HDCP22_CTRL, > + .shift = 0, > + .width = 7, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "hdcp22_esmclk_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_hdcp22_esmclk_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_hdcp22_esmclk_gate = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_HDCP22_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "hdcp22_esmclk_gate", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_hdcp22_esmclk_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static const struct clk_parent_data s4_skpclk_parent_data[] = { > + { .fw_name = "xtal", }, > + { .fw_name = "fclk_div4", }, > + { .fw_name = "fclk_div3", }, > + { .fw_name = "fclk_div5", }, > +}; > + > +static struct clk_regmap s4_hdcp22_skpclk_mux = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_HDCP22_CTRL, > + .mask = 0x3, > + .shift = 25, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "hdcp22_skpclk_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_skpclk_parent_data, > + .num_parents = ARRAY_SIZE(s4_skpclk_parent_data), > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_hdcp22_skpclk_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_HDCP22_CTRL, > + .shift = 16, > + .width = 7, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "hdcp22_skpclk_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_hdcp22_skpclk_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_hdcp22_skpclk_gate = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_HDCP22_CTRL, > + .bit_idx = 24, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "hdcp22_skpclk_gate", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_hdcp22_skpclk_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static const struct clk_parent_data s4_vdin_parent_data[] = { > + { .fw_name = "xtal", }, > + { .fw_name = "fclk_div4", }, > + { .fw_name = "fclk_div3", }, > + { .fw_name = "fclk_div5", }, > + { .hw = &s4_vid_pll.hw } > +}; > + > +static struct clk_regmap s4_vdin_meas_mux = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VDIN_MEAS_CLK_CTRL, > + .mask = 0x7, > + .shift = 9, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vdin_meas_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_vdin_parent_data, > + .num_parents = ARRAY_SIZE(s4_vdin_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_vdin_meas_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_VDIN_MEAS_CLK_CTRL, > + .shift = 0, > + .width = 7, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vdin_meas_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vdin_meas_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vdin_meas_gate = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VDIN_MEAS_CLK_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vdin_meas_gate", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vdin_meas_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +/* EMMC/NAND clock */ > +static const struct clk_parent_data s4_sd_emmc_clk0_parent_data[] = { > + { .fw_name = "xtal", }, > + { .fw_name = "fclk_div2", }, > + { .fw_name = "fclk_div3", }, > + { .fw_name = "hifi_pll", }, > + { .fw_name = "fclk_div2p5", }, > + { .fw_name = "mpll2", }, > + { .fw_name = "mpll3", }, > + { .fw_name = "gp0_pll", }, > +}; > + > +static struct clk_regmap s4_sd_emmc_c_clk0_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_NAND_CLK_CTRL, > + .mask = 0x7, > + .shift = 9, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "sd_emmc_c_clk0_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_sd_emmc_clk0_parent_data, > + .num_parents = ARRAY_SIZE(s4_sd_emmc_clk0_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_sd_emmc_c_clk0_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_NAND_CLK_CTRL, > + .shift = 0, > + .width = 7, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "sd_emmc_c_clk0_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_sd_emmc_c_clk0_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_sd_emmc_c_clk0 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_NAND_CLK_CTRL, > + .bit_idx = 7, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "sd_emmc_c_clk0", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_sd_emmc_c_clk0_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_sd_emmc_a_clk0_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, > + .mask = 0x7, > + .shift = 9, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "sd_emmc_a_clk0_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_sd_emmc_clk0_parent_data, > + .num_parents = ARRAY_SIZE(s4_sd_emmc_clk0_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_sd_emmc_a_clk0_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, > + .shift = 0, > + .width = 7, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "sd_emmc_a_clk0_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_sd_emmc_a_clk0_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_sd_emmc_a_clk0 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, > + .bit_idx = 7, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "sd_emmc_a_clk0", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_sd_emmc_a_clk0_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_sd_emmc_b_clk0_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, > + .mask = 0x7, > + .shift = 25, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "sd_emmc_b_clk0_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_sd_emmc_clk0_parent_data, > + .num_parents = ARRAY_SIZE(s4_sd_emmc_clk0_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_sd_emmc_b_clk0_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, > + .shift = 16, > + .width = 7, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "sd_emmc_b_clk0_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_sd_emmc_b_clk0_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_sd_emmc_b_clk0 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, > + .bit_idx = 23, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "sd_emmc_b_clk0", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_sd_emmc_b_clk0_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +/* SPICC Clock */ > +static const struct clk_parent_data s4_spicc_parent_data[] = { > + { .fw_name = "xtal", }, > + { .hw = &s4_sys_clk.hw }, > + { .fw_name = "fclk_div4", }, > + { .fw_name = "fclk_div3", }, > + { .fw_name = "fclk_div2", }, > + { .fw_name = "fclk_div5", }, > + { .fw_name = "fclk_div7", }, > +}; > + > +static struct clk_regmap s4_spicc0_mux = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_SPICC_CLK_CTRL, > + .mask = 0x7, > + .shift = 7, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "spicc0_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_spicc_parent_data, > + .num_parents = ARRAY_SIZE(s4_spicc_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_spicc0_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_SPICC_CLK_CTRL, > + .shift = 0, > + .width = 6, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "spicc0_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_spicc0_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_spicc0_gate = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_SPICC_CLK_CTRL, > + .bit_idx = 6, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "spicc0", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_spicc0_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +/* PWM Clock */ > +static const struct clk_parent_data s4_pwm_parent_data[] = { > + { .fw_name = "xtal", }, > + { .hw = &s4_vid_pll.hw }, > + { .fw_name = "fclk_div4", }, > + { .fw_name = "fclk_div3", }, > +}; > + > +static struct clk_regmap s4_pwm_a_mux = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_PWM_CLK_AB_CTRL, > + .mask = 0x3, > + .shift = 9, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_a_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_pwm_parent_data, > + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_pwm_a_div = { > + .data = &(struct clk_regmap_div_data) { > + .offset = CLKCTRL_PWM_CLK_AB_CTRL, > + .shift = 0, > + .width = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_a_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_a_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_a_gate = { > + .data = &(struct clk_regmap_gate_data) { > + .offset = CLKCTRL_PWM_CLK_AB_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_a_gate", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_a_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_b_mux = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_PWM_CLK_AB_CTRL, > + .mask = 0x3, > + .shift = 25, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_b_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_pwm_parent_data, > + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_pwm_b_div = { > + .data = &(struct clk_regmap_div_data) { > + .offset = CLKCTRL_PWM_CLK_AB_CTRL, > + .shift = 16, > + .width = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_b_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_b_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_b_gate = { > + .data = &(struct clk_regmap_gate_data) { > + .offset = CLKCTRL_PWM_CLK_AB_CTRL, > + .bit_idx = 24, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_b_gate", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_b_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_c_mux = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_PWM_CLK_CD_CTRL, > + .mask = 0x3, > + .shift = 9, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_c_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_pwm_parent_data, > + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_pwm_c_div = { > + .data = &(struct clk_regmap_div_data) { > + .offset = CLKCTRL_PWM_CLK_CD_CTRL, > + .shift = 0, > + .width = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_c_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_c_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_c_gate = { > + .data = &(struct clk_regmap_gate_data) { > + .offset = CLKCTRL_PWM_CLK_CD_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_c_gate", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_c_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_d_mux = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_PWM_CLK_CD_CTRL, > + .mask = 0x3, > + .shift = 25, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_d_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_pwm_parent_data, > + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_pwm_d_div = { > + .data = &(struct clk_regmap_div_data) { > + .offset = CLKCTRL_PWM_CLK_CD_CTRL, > + .shift = 16, > + .width = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_d_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_d_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_d_gate = { > + .data = &(struct clk_regmap_gate_data) { > + .offset = CLKCTRL_PWM_CLK_CD_CTRL, > + .bit_idx = 24, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_d_gate", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_d_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_e_mux = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_PWM_CLK_EF_CTRL, > + .mask = 0x3, > + .shift = 9, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_e_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_pwm_parent_data, > + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_pwm_e_div = { > + .data = &(struct clk_regmap_div_data) { > + .offset = CLKCTRL_PWM_CLK_EF_CTRL, > + .shift = 0, > + .width = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_e_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_e_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_e_gate = { > + .data = &(struct clk_regmap_gate_data) { > + .offset = CLKCTRL_PWM_CLK_EF_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_e_gate", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_e_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_f_mux = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_PWM_CLK_EF_CTRL, > + .mask = 0x3, > + .shift = 25, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_f_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_pwm_parent_data, > + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_pwm_f_div = { > + .data = &(struct clk_regmap_div_data) { > + .offset = CLKCTRL_PWM_CLK_EF_CTRL, > + .shift = 16, > + .width = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_f_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_f_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_f_gate = { > + .data = &(struct clk_regmap_gate_data) { > + .offset = CLKCTRL_PWM_CLK_EF_CTRL, > + .bit_idx = 24, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_f_gate", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_f_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_g_mux = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_PWM_CLK_GH_CTRL, > + .mask = 0x3, > + .shift = 9, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_g_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_pwm_parent_data, > + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_pwm_g_div = { > + .data = &(struct clk_regmap_div_data) { > + .offset = CLKCTRL_PWM_CLK_GH_CTRL, > + .shift = 0, > + .width = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_g_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_g_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_g_gate = { > + .data = &(struct clk_regmap_gate_data) { > + .offset = CLKCTRL_PWM_CLK_GH_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_g_gate", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_g_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_h_mux = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_PWM_CLK_GH_CTRL, > + .mask = 0x3, > + .shift = 25, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_h_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_pwm_parent_data, > + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_pwm_h_div = { > + .data = &(struct clk_regmap_div_data) { > + .offset = CLKCTRL_PWM_CLK_GH_CTRL, > + .shift = 16, > + .width = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_h_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_h_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_h_gate = { > + .data = &(struct clk_regmap_gate_data) { > + .offset = CLKCTRL_PWM_CLK_GH_CTRL, > + .bit_idx = 24, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_h_gate", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_h_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_i_mux = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, > + .mask = 0x3, > + .shift = 9, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_i_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_pwm_parent_data, > + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_pwm_i_div = { > + .data = &(struct clk_regmap_div_data) { > + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, > + .shift = 0, > + .width = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_i_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_i_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_i_gate = { > + .data = &(struct clk_regmap_gate_data) { > + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_i_gate", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_i_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_j_mux = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, > + .mask = 0x3, > + .shift = 25, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_j_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_pwm_parent_data, > + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_pwm_j_div = { > + .data = &(struct clk_regmap_div_data) { > + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, > + .shift = 16, > + .width = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_j_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_h_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_j_gate = { > + .data = &(struct clk_regmap_gate_data) { > + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, > + .bit_idx = 24, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_j_gate", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_j_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_saradc_mux = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_SAR_CLK_CTRL, > + .mask = 0x3, > + .shift = 9, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "saradc_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = (const struct clk_parent_data []) { > + { .fw_name = "xtal", }, > + { .hw = &s4_sys_clk.hw }, > + }, > + .num_parents = 2, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_saradc_div = { > + .data = &(struct clk_regmap_div_data) { > + .offset = CLKCTRL_SAR_CLK_CTRL, > + .shift = 0, > + .width = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "saradc_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_saradc_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_saradc_gate = { > + .data = &(struct clk_regmap_gate_data) { > + .offset = CLKCTRL_SAR_CLK_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "saradc_clk", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_saradc_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +/* > + * gen clk is designed for debug/monitor some internal clock quality. Some of the > + * corresponding clock sources are not described in the clock tree and internal clock > + * for debug, so they are skipped. > + */ > +static u32 s4_gen_clk_mux_table[] = { 0, 4, 5, 7, 19, 21, 22, > + 23, 24, 25, 26, 27, 28 }; > +static const struct clk_parent_data s4_gen_clk_parent_data[] = { > + { .fw_name = "xtal", }, > + { .hw = &s4_vid_pll.hw }, > + { .fw_name = "gp0_pll", }, > + { .fw_name = "hifi_pll", }, > + { .fw_name = "fclk_div2", }, > + { .fw_name = "fclk_div3", }, > + { .fw_name = "fclk_div4", }, > + { .fw_name = "fclk_div5", }, > + { .fw_name = "fclk_div7", }, > + { .fw_name = "mpll0", }, > + { .fw_name = "mpll1", }, > + { .fw_name = "mpll2", }, > + { .fw_name = "mpll3", }, > +}; > + > +static struct clk_regmap s4_gen_clk_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_GEN_CLK_CTRL, > + .mask = 0x1f, > + .shift = 12, > + .table = s4_gen_clk_mux_table, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "gen_clk_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_gen_clk_parent_data, > + .num_parents = ARRAY_SIZE(s4_gen_clk_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_gen_clk_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_GEN_CLK_CTRL, > + .shift = 0, > + .width = 11, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "gen_clk_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_gen_clk_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_gen_clk = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_GEN_CLK_CTRL, > + .bit_idx = 11, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "gen_clk", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_gen_clk_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE, > + }, > +}; > + > +static const struct clk_parent_data s4_adc_extclk_in_parent_data[] = { > + { .fw_name = "xtal", }, > + { .fw_name = "fclk_div4", }, > + { .fw_name = "fclk_div3", }, > + { .fw_name = "fclk_div5", }, > + { .fw_name = "fclk_div7", }, > + { .fw_name = "mpll2", }, > + { .fw_name = "gp0_pll", }, > + { .fw_name = "hifi_pll", }, > +}; > + > +static struct clk_regmap s4_adc_extclk_in_mux = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_DEMOD_CLK_CTRL, > + .mask = 0x7, > + .shift = 25, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "adc_extclk_in_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_adc_extclk_in_parent_data, > + .num_parents = ARRAY_SIZE(s4_adc_extclk_in_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_adc_extclk_in_div = { > + .data = &(struct clk_regmap_div_data) { > + .offset = CLKCTRL_DEMOD_CLK_CTRL, > + .shift = 16, > + .width = 7, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "adc_extclk_in_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_adc_extclk_in_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_adc_extclk_in_gate = { > + .data = &(struct clk_regmap_gate_data) { > + .offset = CLKCTRL_DEMOD_CLK_CTRL, > + .bit_idx = 24, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "adc_extclk_in", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_adc_extclk_in_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_demod_core_clk_mux = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_DEMOD_CLK_CTRL, > + .mask = 0x3, > + .shift = 9, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "demod_core_clk_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = (const struct clk_parent_data []) { > + { .fw_name = "xtal", }, > + { .fw_name = "fclk_div7", }, > + { .fw_name = "fclk_div4", }, > + { .hw = &s4_adc_extclk_in_gate.hw } > + }, > + .num_parents = 4, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_demod_core_clk_div = { > + .data = &(struct clk_regmap_div_data) { > + .offset = CLKCTRL_DEMOD_CLK_CTRL, > + .shift = 0, > + .width = 7, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "demod_core_clk_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_demod_core_clk_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_demod_core_clk_gate = { > + .data = &(struct clk_regmap_gate_data) { > + .offset = CLKCTRL_DEMOD_CLK_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "demod_core_clk", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_demod_core_clk_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +#define MESON_GATE(_name, _reg, _bit) \ > + MESON_PCLK(_name, _reg, _bit, &s4_sys_clk.hw) > + > +static MESON_GATE(s4_ddr, CLKCTRL_SYS_CLK_EN0_REG0, 0); > +static MESON_GATE(s4_dos, CLKCTRL_SYS_CLK_EN0_REG0, 1); > +static MESON_GATE(s4_ethphy, CLKCTRL_SYS_CLK_EN0_REG0, 4); > +static MESON_GATE(s4_mali, CLKCTRL_SYS_CLK_EN0_REG0, 6); > +static MESON_GATE(s4_aocpu, CLKCTRL_SYS_CLK_EN0_REG0, 13); > +static MESON_GATE(s4_aucpu, CLKCTRL_SYS_CLK_EN0_REG0, 14); > +static MESON_GATE(s4_cec, CLKCTRL_SYS_CLK_EN0_REG0, 16); > +static MESON_GATE(s4_sdemmca, CLKCTRL_SYS_CLK_EN0_REG0, 24); > +static MESON_GATE(s4_sdemmcb, CLKCTRL_SYS_CLK_EN0_REG0, 25); > +static MESON_GATE(s4_nand, CLKCTRL_SYS_CLK_EN0_REG0, 26); > +static MESON_GATE(s4_smartcard, CLKCTRL_SYS_CLK_EN0_REG0, 27); > +static MESON_GATE(s4_acodec, CLKCTRL_SYS_CLK_EN0_REG0, 28); > +static MESON_GATE(s4_spifc, CLKCTRL_SYS_CLK_EN0_REG0, 29); > +static MESON_GATE(s4_msr_clk, CLKCTRL_SYS_CLK_EN0_REG0, 30); > +static MESON_GATE(s4_ir_ctrl, CLKCTRL_SYS_CLK_EN0_REG0, 31); > +static MESON_GATE(s4_audio, CLKCTRL_SYS_CLK_EN0_REG1, 0); > +static MESON_GATE(s4_eth, CLKCTRL_SYS_CLK_EN0_REG1, 3); > +static MESON_GATE(s4_uart_a, CLKCTRL_SYS_CLK_EN0_REG1, 5); > +static MESON_GATE(s4_uart_b, CLKCTRL_SYS_CLK_EN0_REG1, 6); > +static MESON_GATE(s4_uart_c, CLKCTRL_SYS_CLK_EN0_REG1, 7); > +static MESON_GATE(s4_uart_d, CLKCTRL_SYS_CLK_EN0_REG1, 8); > +static MESON_GATE(s4_uart_e, CLKCTRL_SYS_CLK_EN0_REG1, 9); > +static MESON_GATE(s4_aififo, CLKCTRL_SYS_CLK_EN0_REG1, 11); > +static MESON_GATE(s4_ts_ddr, CLKCTRL_SYS_CLK_EN0_REG1, 15); > +static MESON_GATE(s4_ts_pll, CLKCTRL_SYS_CLK_EN0_REG1, 16); > +static MESON_GATE(s4_g2d, CLKCTRL_SYS_CLK_EN0_REG1, 20); > +static MESON_GATE(s4_spicc0, CLKCTRL_SYS_CLK_EN0_REG1, 21); > +static MESON_GATE(s4_usb, CLKCTRL_SYS_CLK_EN0_REG1, 26); > +static MESON_GATE(s4_i2c_m_a, CLKCTRL_SYS_CLK_EN0_REG1, 30); > +static MESON_GATE(s4_i2c_m_b, CLKCTRL_SYS_CLK_EN0_REG1, 31); > +static MESON_GATE(s4_i2c_m_c, CLKCTRL_SYS_CLK_EN0_REG2, 0); > +static MESON_GATE(s4_i2c_m_d, CLKCTRL_SYS_CLK_EN0_REG2, 1); > +static MESON_GATE(s4_i2c_m_e, CLKCTRL_SYS_CLK_EN0_REG2, 2); > +static MESON_GATE(s4_hdmitx_apb, CLKCTRL_SYS_CLK_EN0_REG2, 4); > +static MESON_GATE(s4_i2c_s_a, CLKCTRL_SYS_CLK_EN0_REG2, 5); > +static MESON_GATE(s4_usb1_to_ddr, CLKCTRL_SYS_CLK_EN0_REG2, 8); > +static MESON_GATE(s4_hdcp22, CLKCTRL_SYS_CLK_EN0_REG2, 10); > +static MESON_GATE(s4_mmc_apb, CLKCTRL_SYS_CLK_EN0_REG2, 11); > +static MESON_GATE(s4_rsa, CLKCTRL_SYS_CLK_EN0_REG2, 18); > +static MESON_GATE(s4_cpu_debug, CLKCTRL_SYS_CLK_EN0_REG2, 19); > +static MESON_GATE(s4_vpu_intr, CLKCTRL_SYS_CLK_EN0_REG2, 25); > +static MESON_GATE(s4_demod, CLKCTRL_SYS_CLK_EN0_REG2, 27); > +static MESON_GATE(s4_sar_adc, CLKCTRL_SYS_CLK_EN0_REG2, 28); > +static MESON_GATE(s4_gic, CLKCTRL_SYS_CLK_EN0_REG2, 30); > +static MESON_GATE(s4_pwm_ab, CLKCTRL_SYS_CLK_EN0_REG3, 7); > +static MESON_GATE(s4_pwm_cd, CLKCTRL_SYS_CLK_EN0_REG3, 8); > +static MESON_GATE(s4_pwm_ef, CLKCTRL_SYS_CLK_EN0_REG3, 9); > +static MESON_GATE(s4_pwm_gh, CLKCTRL_SYS_CLK_EN0_REG3, 10); > +static MESON_GATE(s4_pwm_ij, CLKCTRL_SYS_CLK_EN0_REG3, 11); > + > +/* Array of all clocks provided by this provider */ > +static struct clk_hw_onecell_data s4_periphs_hw_onecell_data = { > + .hws = { > + [CLKID_RTC_32K_CLKIN] = &s4_rtc_32k_by_oscin_clkin.hw, > + [CLKID_RTC_32K_DIV] = &s4_rtc_32k_by_oscin_div.hw, > + [CLKID_RTC_32K_SEL] = &s4_rtc_32k_by_oscin_sel.hw, > + [CLKID_RTC_32K_XATL] = &s4_rtc_32k_by_oscin.hw, > + [CLKID_RTC_CLK] = &s4_rtc_clk.hw, > + [CLKID_SYS_CLK_B_SEL] = &s4_sysclk_b_sel.hw, > + [CLKID_SYS_CLK_B_DIV] = &s4_sysclk_b_div.hw, > + [CLKID_SYS_CLK_B_GATE] = &s4_sysclk_b.hw, > + [CLKID_SYS_CLK_A_SEL] = &s4_sysclk_a_sel.hw, > + [CLKID_SYS_CLK_A_DIV] = &s4_sysclk_a_div.hw, > + [CLKID_SYS_CLK_A_GATE] = &s4_sysclk_a.hw, > + [CLKID_SYS_CLK] = &s4_sys_clk.hw, > + [CLKID_CECA_32K_CLKIN] = &s4_ceca_32k_clkin.hw, > + [CLKID_CECA_32K_DIV] = &s4_ceca_32k_div.hw, > + [CLKID_CECA_32K_SEL_PRE] = &s4_ceca_32k_sel_pre.hw, > + [CLKID_CECA_32K_SEL] = &s4_ceca_32k_sel.hw, > + [CLKID_CECA_32K_CLKOUT] = &s4_ceca_32k_clkout.hw, > + [CLKID_CECB_32K_CLKIN] = &s4_cecb_32k_clkin.hw, > + [CLKID_CECB_32K_DIV] = &s4_cecb_32k_div.hw, > + [CLKID_CECB_32K_SEL_PRE] = &s4_cecb_32k_sel_pre.hw, > + [CLKID_CECB_32K_SEL] = &s4_cecb_32k_sel.hw, > + [CLKID_CECB_32K_CLKOUT] = &s4_cecb_32k_clkout.hw, > + [CLKID_SC_CLK_SEL] = &s4_sc_clk_mux.hw, > + [CLKID_SC_CLK_DIV] = &s4_sc_clk_div.hw, > + [CLKID_SC_CLK_GATE] = &s4_sc_clk_gate.hw, > + [CLKID_12_24M_CLK_GATE] = &s4_12_24M_clk_gate.hw, > + [CLKID_12M_CLK_DIV] = &s4_12M_clk_div.hw, > + [CLKID_12_24M_CLK_SEL] = &s4_12_24M_clk.hw, > + [CLKID_VID_PLL_DIV] = &s4_vid_pll_div.hw, > + [CLKID_VID_PLL_SEL] = &s4_vid_pll_sel.hw, > + [CLKID_VID_PLL] = &s4_vid_pll.hw, > + [CLKID_VCLK_SEL] = &s4_vclk_sel.hw, > + [CLKID_VCLK2_SEL] = &s4_vclk2_sel.hw, > + [CLKID_VCLK_INPUT] = &s4_vclk_input.hw, > + [CLKID_VCLK2_INPUT] = &s4_vclk2_input.hw, > + [CLKID_VCLK_DIV] = &s4_vclk_div.hw, > + [CLKID_VCLK2_DIV] = &s4_vclk2_div.hw, > + [CLKID_VCLK] = &s4_vclk.hw, > + [CLKID_VCLK2] = &s4_vclk2.hw, > + [CLKID_VCLK_DIV1] = &s4_vclk_div1.hw, > + [CLKID_VCLK_DIV2_EN] = &s4_vclk_div2_en.hw, > + [CLKID_VCLK_DIV4_EN] = &s4_vclk_div4_en.hw, > + [CLKID_VCLK_DIV6_EN] = &s4_vclk_div6_en.hw, > + [CLKID_VCLK_DIV12_EN] = &s4_vclk_div12_en.hw, > + [CLKID_VCLK2_DIV1] = &s4_vclk2_div1.hw, > + [CLKID_VCLK2_DIV2_EN] = &s4_vclk2_div2_en.hw, > + [CLKID_VCLK2_DIV4_EN] = &s4_vclk2_div4_en.hw, > + [CLKID_VCLK2_DIV6_EN] = &s4_vclk2_div6_en.hw, > + [CLKID_VCLK2_DIV12_EN] = &s4_vclk2_div12_en.hw, > + [CLKID_VCLK_DIV2] = &s4_vclk_div2.hw, > + [CLKID_VCLK_DIV4] = &s4_vclk_div4.hw, > + [CLKID_VCLK_DIV6] = &s4_vclk_div6.hw, > + [CLKID_VCLK_DIV12] = &s4_vclk_div12.hw, > + [CLKID_VCLK2_DIV2] = &s4_vclk2_div2.hw, > + [CLKID_VCLK2_DIV4] = &s4_vclk2_div4.hw, > + [CLKID_VCLK2_DIV6] = &s4_vclk2_div6.hw, > + [CLKID_VCLK2_DIV12] = &s4_vclk2_div12.hw, > + [CLKID_CTS_ENCI_SEL] = &s4_cts_enci_sel.hw, > + [CLKID_CTS_ENCP_SEL] = &s4_cts_encp_sel.hw, > + [CLKID_CTS_VDAC_SEL] = &s4_cts_vdac_sel.hw, > + [CLKID_HDMI_TX_SEL] = &s4_hdmi_tx_sel.hw, > + [CLKID_CTS_ENCI] = &s4_cts_enci.hw, > + [CLKID_CTS_ENCP] = &s4_cts_encp.hw, > + [CLKID_CTS_VDAC] = &s4_cts_vdac.hw, > + [CLKID_HDMI_TX] = &s4_hdmi_tx.hw, > + [CLKID_HDMI_SEL] = &s4_hdmi_sel.hw, > + [CLKID_HDMI_DIV] = &s4_hdmi_div.hw, > + [CLKID_HDMI] = &s4_hdmi.hw, > + [CLKID_TS_CLK_DIV] = &s4_ts_clk_div.hw, > + [CLKID_TS_CLK_GATE] = &s4_ts_clk_gate.hw, > + [CLKID_MALI_0_SEL] = &s4_mali_0_sel.hw, > + [CLKID_MALI_0_DIV] = &s4_mali_0_div.hw, > + [CLKID_MALI_0] = &s4_mali_0.hw, > + [CLKID_MALI_1_SEL] = &s4_mali_1_sel.hw, > + [CLKID_MALI_1_DIV] = &s4_mali_1_div.hw, > + [CLKID_MALI_1] = &s4_mali_1.hw, > + [CLKID_MALI] = &s4_mali_mux.hw, > + [CLKID_VDEC_P0_SEL] = &s4_vdec_p0_mux.hw, > + [CLKID_VDEC_P0_DIV] = &s4_vdec_p0_div.hw, > + [CLKID_VDEC_P0] = &s4_vdec_p0.hw, > + [CLKID_VDEC_P1_SEL] = &s4_vdec_p1_mux.hw, > + [CLKID_VDEC_P1_DIV] = &s4_vdec_p1_div.hw, > + [CLKID_VDEC_P1] = &s4_vdec_p1.hw, > + [CLKID_VDEC_SEL] = &s4_vdec_mux.hw, > + [CLKID_HEVCF_P0_SEL] = &s4_hevcf_p0_mux.hw, > + [CLKID_HEVCF_P0_DIV] = &s4_hevcf_p0_div.hw, > + [CLKID_HEVCF_P0] = &s4_hevcf_p0.hw, > + [CLKID_HEVCF_P1_SEL] = &s4_hevcf_p1_mux.hw, > + [CLKID_HEVCF_P1_DIV] = &s4_hevcf_p1_div.hw, > + [CLKID_HEVCF_P1] = &s4_hevcf_p1.hw, > + [CLKID_HEVCF_SEL] = &s4_hevcf_mux.hw, > + [CLKID_VPU_0_SEL] = &s4_vpu_0_sel.hw, > + [CLKID_VPU_0_DIV] = &s4_vpu_0_div.hw, > + [CLKID_VPU_0] = &s4_vpu_0.hw, > + [CLKID_VPU_1_SEL] = &s4_vpu_1_sel.hw, > + [CLKID_VPU_1_DIV] = &s4_vpu_1_div.hw, > + [CLKID_VPU_1] = &s4_vpu_1.hw, > + [CLKID_VPU] = &s4_vpu.hw, > + [CLKID_VPU_CLKB_TMP_SEL] = &s4_vpu_clkb_tmp_mux.hw, > + [CLKID_VPU_CLKB_TMP_DIV] = &s4_vpu_clkb_tmp_div.hw, > + [CLKID_VPU_CLKB_TMP] = &s4_vpu_clkb_tmp.hw, > + [CLKID_VPU_CLKB_DIV] = &s4_vpu_clkb_div.hw, > + [CLKID_VPU_CLKB] = &s4_vpu_clkb.hw, > + [CLKID_VPU_CLKC_P0_SEL] = &s4_vpu_clkc_p0_mux.hw, > + [CLKID_VPU_CLKC_P0_DIV] = &s4_vpu_clkc_p0_div.hw, > + [CLKID_VPU_CLKC_P0] = &s4_vpu_clkc_p0.hw, > + [CLKID_VPU_CLKC_P1_SEL] = &s4_vpu_clkc_p1_mux.hw, > + [CLKID_VPU_CLKC_P1_DIV] = &s4_vpu_clkc_p1_div.hw, > + [CLKID_VPU_CLKC_P1] = &s4_vpu_clkc_p1.hw, > + [CLKID_VPU_CLKC_SEL] = &s4_vpu_clkc_mux.hw, > + [CLKID_VAPB_0_SEL] = &s4_vapb_0_sel.hw, > + [CLKID_VAPB_0_DIV] = &s4_vapb_0_div.hw, > + [CLKID_VAPB_0] = &s4_vapb_0.hw, > + [CLKID_VAPB_1_SEL] = &s4_vapb_1_sel.hw, > + [CLKID_VAPB_1_DIV] = &s4_vapb_1_div.hw, > + [CLKID_VAPB_1] = &s4_vapb_1.hw, > + [CLKID_VAPB] = &s4_vapb.hw, > + [CLKID_GE2D] = &s4_ge2d_gate.hw, > + [CLKID_VDIN_MEAS_SEL] = &s4_vdin_meas_mux.hw, > + [CLKID_VDIN_MEAS_DIV] = &s4_vdin_meas_div.hw, > + [CLKID_VDIN_MEAS_GATE] = &s4_vdin_meas_gate.hw, > + [CLKID_SD_EMMC_C_CLK_SEL] = &s4_sd_emmc_c_clk0_sel.hw, > + [CLKID_SD_EMMC_C_CLK_DIV] = &s4_sd_emmc_c_clk0_div.hw, > + [CLKID_SD_EMMC_C_CLK] = &s4_sd_emmc_c_clk0.hw, > + [CLKID_SD_EMMC_A_CLK_SEL] = &s4_sd_emmc_a_clk0_sel.hw, > + [CLKID_SD_EMMC_A_CLK_DIV] = &s4_sd_emmc_a_clk0_div.hw, > + [CLKID_SD_EMMC_A_CLK] = &s4_sd_emmc_a_clk0.hw, > + [CLKID_SD_EMMC_B_CLK_SEL] = &s4_sd_emmc_b_clk0_sel.hw, > + [CLKID_SD_EMMC_B_CLK_DIV] = &s4_sd_emmc_b_clk0_div.hw, > + [CLKID_SD_EMMC_B_CLK] = &s4_sd_emmc_b_clk0.hw, > + [CLKID_SPICC0_SEL] = &s4_spicc0_mux.hw, > + [CLKID_SPICC0_DIV] = &s4_spicc0_div.hw, > + [CLKID_SPICC0_GATE] = &s4_spicc0_gate.hw, > + [CLKID_PWM_A_SEL] = &s4_pwm_a_mux.hw, > + [CLKID_PWM_A_DIV] = &s4_pwm_a_div.hw, > + [CLKID_PWM_A_GATE] = &s4_pwm_a_gate.hw, > + [CLKID_PWM_B_SEL] = &s4_pwm_b_mux.hw, > + [CLKID_PWM_B_DIV] = &s4_pwm_b_div.hw, > + [CLKID_PWM_B_GATE] = &s4_pwm_b_gate.hw, > + [CLKID_PWM_C_SEL] = &s4_pwm_c_mux.hw, > + [CLKID_PWM_C_DIV] = &s4_pwm_c_div.hw, > + [CLKID_PWM_C_GATE] = &s4_pwm_c_gate.hw, > + [CLKID_PWM_D_SEL] = &s4_pwm_d_mux.hw, > + [CLKID_PWM_D_DIV] = &s4_pwm_d_div.hw, > + [CLKID_PWM_D_GATE] = &s4_pwm_d_gate.hw, > + [CLKID_PWM_E_SEL] = &s4_pwm_e_mux.hw, > + [CLKID_PWM_E_DIV] = &s4_pwm_e_div.hw, > + [CLKID_PWM_E_GATE] = &s4_pwm_e_gate.hw, > + [CLKID_PWM_F_SEL] = &s4_pwm_f_mux.hw, > + [CLKID_PWM_F_DIV] = &s4_pwm_f_div.hw, > + [CLKID_PWM_F_GATE] = &s4_pwm_f_gate.hw, > + [CLKID_PWM_G_SEL] = &s4_pwm_g_mux.hw, > + [CLKID_PWM_G_DIV] = &s4_pwm_g_div.hw, > + [CLKID_PWM_G_GATE] = &s4_pwm_g_gate.hw, > + [CLKID_PWM_H_SEL] = &s4_pwm_h_mux.hw, > + [CLKID_PWM_H_DIV] = &s4_pwm_h_div.hw, > + [CLKID_PWM_H_GATE] = &s4_pwm_h_gate.hw, > + [CLKID_PWM_I_SEL] = &s4_pwm_i_mux.hw, > + [CLKID_PWM_I_DIV] = &s4_pwm_i_div.hw, > + [CLKID_PWM_I_GATE] = &s4_pwm_i_gate.hw, > + [CLKID_PWM_J_SEL] = &s4_pwm_j_mux.hw, > + [CLKID_PWM_J_DIV] = &s4_pwm_j_div.hw, > + [CLKID_PWM_J_GATE] = &s4_pwm_j_gate.hw, > + [CLKID_SARADC_SEL] = &s4_saradc_mux.hw, > + [CLKID_SARADC_DIV] = &s4_saradc_div.hw, > + [CLKID_SARADC_GATE] = &s4_saradc_gate.hw, > + [CLKID_GEN_SEL] = &s4_gen_clk_sel.hw, > + [CLKID_GEN_DIV] = &s4_gen_clk_div.hw, > + [CLKID_GEN_GATE] = &s4_gen_clk.hw, > + [CLKID_DDR] = &s4_ddr.hw, > + [CLKID_DOS] = &s4_dos.hw, > + [CLKID_ETHPHY] = &s4_ethphy.hw, > + [CLKID_MALI_GATE] = &s4_mali.hw, > + [CLKID_AOCPU] = &s4_aocpu.hw, > + [CLKID_AUCPU] = &s4_aucpu.hw, > + [CLKID_CEC] = &s4_cec.hw, > + [CLKID_SD_EMMC_A] = &s4_sdemmca.hw, > + [CLKID_SD_EMMC_B] = &s4_sdemmcb.hw, > + [CLKID_NAND] = &s4_nand.hw, > + [CLKID_SMARTCARD] = &s4_smartcard.hw, > + [CLKID_ACODEC] = &s4_acodec.hw, > + [CLKID_SPIFC] = &s4_spifc.hw, > + [CLKID_MSR_CLK] = &s4_msr_clk.hw, > + [CLKID_IR_CTRL] = &s4_ir_ctrl.hw, > + [CLKID_AUDIO] = &s4_audio.hw, > + [CLKID_ETH] = &s4_eth.hw, > + [CLKID_UART_A] = &s4_uart_a.hw, > + [CLKID_UART_B] = &s4_uart_b.hw, > + [CLKID_UART_C] = &s4_uart_c.hw, > + [CLKID_UART_D] = &s4_uart_d.hw, > + [CLKID_UART_E] = &s4_uart_e.hw, > + [CLKID_AIFIFO] = &s4_aififo.hw, > + [CLKID_TS_DDR] = &s4_ts_ddr.hw, > + [CLKID_TS_PLL] = &s4_ts_pll.hw, > + [CLKID_G2D] = &s4_g2d.hw, > + [CLKID_SPICC0] = &s4_spicc0.hw, > + [CLKID_USB] = &s4_usb.hw, > + [CLKID_I2C_M_A] = &s4_i2c_m_a.hw, > + [CLKID_I2C_M_B] = &s4_i2c_m_b.hw, > + [CLKID_I2C_M_C] = &s4_i2c_m_c.hw, > + [CLKID_I2C_M_D] = &s4_i2c_m_d.hw, > + [CLKID_I2C_M_E] = &s4_i2c_m_e.hw, > + [CLKID_HDMITX_APB] = &s4_hdmitx_apb.hw, > + [CLKID_I2C_S_A] = &s4_i2c_s_a.hw, > + [CLKID_USB1_TO_DDR] = &s4_usb1_to_ddr.hw, > + [CLKID_HDCP22] = &s4_hdcp22.hw, > + [CLKID_MMC_APB] = &s4_mmc_apb.hw, > + [CLKID_RSA] = &s4_rsa.hw, > + [CLKID_CPU_DEBUG] = &s4_cpu_debug.hw, > + [CLKID_VPU_INTR] = &s4_vpu_intr.hw, > + [CLKID_DEMOD] = &s4_demod.hw, > + [CLKID_SAR_ADC] = &s4_sar_adc.hw, > + [CLKID_GIC] = &s4_gic.hw, > + [CLKID_PWM_AB] = &s4_pwm_ab.hw, > + [CLKID_PWM_CD] = &s4_pwm_cd.hw, > + [CLKID_PWM_EF] = &s4_pwm_ef.hw, > + [CLKID_PWM_GH] = &s4_pwm_gh.hw, > + [CLKID_PWM_IJ] = &s4_pwm_ij.hw, > + [CLKID_HDCP22_ESMCLK_SEL] = &s4_hdcp22_esmclk_mux.hw, > + [CLKID_HDCP22_ESMCLK_DIV] = &s4_hdcp22_esmclk_div.hw, > + [CLKID_HDCP22_ESMCLK_GATE] = &s4_hdcp22_esmclk_gate.hw, > + [CLKID_HDCP22_SKPCLK_SEL] = &s4_hdcp22_skpclk_mux.hw, > + [CLKID_HDCP22_SKPCLK_DIV] = &s4_hdcp22_skpclk_div.hw, > + [CLKID_HDCP22_SKPCLK_GATE] = &s4_hdcp22_skpclk_gate.hw, > + [NR_CLKS] = NULL > + }, > + .num = NR_CLKS, > +}; > + > +/* Convenience table to populate regmap in .probe */ > +static struct clk_regmap *const s4_periphs_clk_regmaps[] = { > + &s4_rtc_32k_by_oscin_clkin, > + &s4_rtc_32k_by_oscin_div, > + &s4_rtc_32k_by_oscin_sel, > + &s4_rtc_32k_by_oscin, > + &s4_rtc_clk, > + &s4_sysclk_b_sel, > + &s4_sysclk_b_div, > + &s4_sysclk_b, > + &s4_sysclk_a_sel, > + &s4_sysclk_a_div, > + &s4_sysclk_a, > + &s4_sys_clk, > + &s4_ceca_32k_clkin, > + &s4_ceca_32k_div, > + &s4_ceca_32k_sel_pre, > + &s4_ceca_32k_sel, > + &s4_ceca_32k_clkout, > + &s4_cecb_32k_clkin, > + &s4_cecb_32k_div, > + &s4_cecb_32k_sel_pre, > + &s4_cecb_32k_sel, > + &s4_cecb_32k_clkout, > + &s4_sc_clk_mux, > + &s4_sc_clk_div, > + &s4_sc_clk_gate, > + &s4_12_24M_clk_gate, > + &s4_12_24M_clk, > + &s4_vid_pll_div, > + &s4_vid_pll_sel, > + &s4_vid_pll, > + &s4_vclk_sel, > + &s4_vclk2_sel, > + &s4_vclk_input, > + &s4_vclk2_input, > + &s4_vclk_div, > + &s4_vclk2_div, > + &s4_vclk, > + &s4_vclk2, > + &s4_vclk_div1, > + &s4_vclk_div2_en, > + &s4_vclk_div4_en, > + &s4_vclk_div6_en, > + &s4_vclk_div12_en, > + &s4_vclk2_div1, > + &s4_vclk2_div2_en, > + &s4_vclk2_div4_en, > + &s4_vclk2_div6_en, > + &s4_vclk2_div12_en, > + &s4_cts_enci_sel, > + &s4_cts_encp_sel, > + &s4_cts_vdac_sel, > + &s4_hdmi_tx_sel, > + &s4_cts_enci, > + &s4_cts_encp, > + &s4_cts_vdac, > + &s4_hdmi_tx, > + &s4_hdmi_sel, > + &s4_hdmi_div, > + &s4_hdmi, > + &s4_ts_clk_div, > + &s4_ts_clk_gate, > + &s4_mali_0_sel, > + &s4_mali_0_div, > + &s4_mali_0, > + &s4_mali_1_sel, > + &s4_mali_1_div, > + &s4_mali_1, > + &s4_mali_mux, > + &s4_vdec_p0_mux, > + &s4_vdec_p0_div, > + &s4_vdec_p0, > + &s4_vdec_p1_mux, > + &s4_vdec_p1_div, > + &s4_vdec_p1, > + &s4_vdec_mux, > + &s4_hevcf_p0_mux, > + &s4_hevcf_p0_div, > + &s4_hevcf_p0, > + &s4_hevcf_p1_mux, > + &s4_hevcf_p1_div, > + &s4_hevcf_p1, > + &s4_hevcf_mux, > + &s4_vpu_0_sel, > + &s4_vpu_0_div, > + &s4_vpu_0, > + &s4_vpu_1_sel, > + &s4_vpu_1_div, > + &s4_vpu_1, > + &s4_vpu, > + &s4_vpu_clkb_tmp_mux, > + &s4_vpu_clkb_tmp_div, > + &s4_vpu_clkb_tmp, > + &s4_vpu_clkb_div, > + &s4_vpu_clkb, > + &s4_vpu_clkc_p0_mux, > + &s4_vpu_clkc_p0_div, > + &s4_vpu_clkc_p0, > + &s4_vpu_clkc_p1_mux, > + &s4_vpu_clkc_p1_div, > + &s4_vpu_clkc_p1, > + &s4_vpu_clkc_mux, > + &s4_vapb_0_sel, > + &s4_vapb_0_div, > + &s4_vapb_0, > + &s4_vapb_1_sel, > + &s4_vapb_1_div, > + &s4_vapb_1, > + &s4_vapb, > + &s4_ge2d_gate, > + &s4_hdcp22_esmclk_mux, > + &s4_hdcp22_esmclk_div, > + &s4_hdcp22_esmclk_gate, > + &s4_hdcp22_skpclk_mux, > + &s4_hdcp22_skpclk_div, > + &s4_hdcp22_skpclk_gate, > + &s4_vdin_meas_mux, > + &s4_vdin_meas_div, > + &s4_vdin_meas_gate, > + &s4_sd_emmc_c_clk0_sel, > + &s4_sd_emmc_c_clk0_div, > + &s4_sd_emmc_c_clk0, > + &s4_sd_emmc_a_clk0_sel, > + &s4_sd_emmc_a_clk0_div, > + &s4_sd_emmc_a_clk0, > + &s4_sd_emmc_b_clk0_sel, > + &s4_sd_emmc_b_clk0_div, > + &s4_sd_emmc_b_clk0, > + &s4_spicc0_mux, > + &s4_spicc0_div, > + &s4_spicc0_gate, > + &s4_pwm_a_mux, > + &s4_pwm_a_div, > + &s4_pwm_a_gate, > + &s4_pwm_b_mux, > + &s4_pwm_b_div, > + &s4_pwm_b_gate, > + &s4_pwm_c_mux, > + &s4_pwm_c_div, > + &s4_pwm_c_gate, > + &s4_pwm_d_mux, > + &s4_pwm_d_div, > + &s4_pwm_d_gate, > + &s4_pwm_e_mux, > + &s4_pwm_e_div, > + &s4_pwm_e_gate, > + &s4_pwm_f_mux, > + &s4_pwm_f_div, > + &s4_pwm_f_gate, > + &s4_pwm_g_mux, > + &s4_pwm_g_div, > + &s4_pwm_g_gate, > + &s4_pwm_h_mux, > + &s4_pwm_h_div, > + &s4_pwm_h_gate, > + &s4_pwm_i_mux, > + &s4_pwm_i_div, > + &s4_pwm_i_gate, > + &s4_pwm_j_mux, > + &s4_pwm_j_div, > + &s4_pwm_j_gate, > + &s4_saradc_mux, > + &s4_saradc_div, > + &s4_saradc_gate, > + &s4_gen_clk_sel, > + &s4_gen_clk_div, > + &s4_gen_clk, > + &s4_ddr, > + &s4_dos, > + &s4_ethphy, > + &s4_mali, > + &s4_aocpu, > + &s4_aucpu, > + &s4_cec, > + &s4_sdemmca, > + &s4_sdemmcb, > + &s4_nand, > + &s4_smartcard, > + &s4_acodec, > + &s4_spifc, > + &s4_msr_clk, > + &s4_ir_ctrl, > + &s4_audio, > + &s4_eth, > + &s4_uart_a, > + &s4_uart_b, > + &s4_uart_c, > + &s4_uart_d, > + &s4_uart_e, > + &s4_aififo, > + &s4_ts_ddr, > + &s4_ts_pll, > + &s4_g2d, > + &s4_spicc0, > + &s4_usb, > + &s4_i2c_m_a, > + &s4_i2c_m_b, > + &s4_i2c_m_c, > + &s4_i2c_m_d, > + &s4_i2c_m_e, > + &s4_hdmitx_apb, > + &s4_i2c_s_a, > + &s4_usb1_to_ddr, > + &s4_hdcp22, > + &s4_mmc_apb, > + &s4_rsa, > + &s4_cpu_debug, > + &s4_vpu_intr, > + &s4_demod, > + &s4_sar_adc, > + &s4_gic, > + &s4_pwm_ab, > + &s4_pwm_cd, > + &s4_pwm_ef, > + &s4_pwm_gh, > + &s4_pwm_ij, > + &s4_demod_core_clk_mux, > + &s4_demod_core_clk_div, > + &s4_demod_core_clk_gate, > + &s4_adc_extclk_in_mux, > + &s4_adc_extclk_in_div, > + &s4_adc_extclk_in_gate, > +}; > + > +static struct regmap_config clkc_regmap_config = { > + .reg_bits = 32, > + .val_bits = 32, > + .reg_stride = 4, > +}; > + > +static int meson_s4_periphs_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct regmap *regmap; > + void __iomem *base; > + int ret, i; > + > + base = devm_platform_ioremap_resource(pdev, 0); > + if (IS_ERR(base)) > + return PTR_ERR(base); > + > + regmap = devm_regmap_init_mmio(dev, base, &clkc_regmap_config); > + if (IS_ERR(regmap)) > + return PTR_ERR(regmap); > + > + /* Populate regmap for the regmap backed clocks */ > + for (i = 0; i < ARRAY_SIZE(s4_periphs_clk_regmaps); i++) > + s4_periphs_clk_regmaps[i]->map = regmap; > + > + for (i = 0; i < s4_periphs_hw_onecell_data.num; i++) { > + /* array might be sparse */ > + if (!s4_periphs_hw_onecell_data.hws[i]) > + continue; > + > + ret = devm_clk_hw_register(dev, s4_periphs_hw_onecell_data.hws[i]); > + if (ret) { > + dev_err(dev, "Clock registration failed\n"); > + return ret; > + } > + } > + > + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, > + &s4_periphs_hw_onecell_data); > +} > + > +static const struct of_device_id clkc_match_table[] = { > + { > + .compatible = "amlogic,s4-peripherals-clkc", > + }, > + {} > +}; > + > +static struct platform_driver s4_driver = { > + .probe = meson_s4_periphs_probe, > + .driver = { > + .name = "s4-periphs-clkc", > + .of_match_table = clkc_match_table, > + }, > +}; > + > +module_platform_driver(s4_driver); > +MODULE_LICENSE("GPL"); > diff --git a/drivers/clk/meson/s4-peripherals.h b/drivers/clk/meson/s4-peripherals.h > new file mode 100644 > index 000000000000..13ef07bada83 > --- /dev/null > +++ b/drivers/clk/meson/s4-peripherals.h > @@ -0,0 +1,218 @@ > +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ > +/* > + * Copyright (c) 2021 Amlogic, inc. > + * Author: Yu Tu <yu.tu@amlogic.com> > + */ > + > +#ifndef __MESON_S4_PERIPHERALS_H__ > +#define __MESON_S4_PERIPHERALS_H__ > + > +/* > + * Clock controller register offsets > + * REG_BASE: REGISTER_BASE_ADDR = 0xfe000000 > + */ > +#define CLKCTRL_OSCIN_CTRL 0x004 > +#define CLKCTRL_RTC_BY_OSCIN_CTRL0 0x008 > +#define CLKCTRL_RTC_BY_OSCIN_CTRL1 0x00c > +#define CLKCTRL_RTC_CTRL 0x010 > +#define CLKCTRL_CHECK_CLK_RESULT 0x014 > +#define CLKCTRL_MBIST_ATSPEED_CTRL 0x018 > +#define CLKCTRL_LOCK_BIT_REG0 0x020 > +#define CLKCTRL_LOCK_BIT_REG1 0x024 > +#define CLKCTRL_LOCK_BIT_REG2 0x028 > +#define CLKCTRL_LOCK_BIT_REG3 0x02c > +#define CLKCTRL_PROT_BIT_REG0 0x030 > +#define CLKCTRL_PROT_BIT_REG1 0x034 > +#define CLKCTRL_PROT_BIT_REG2 0x038 > +#define CLKCTRL_PROT_BIT_REG3 0x03c > +#define CLKCTRL_SYS_CLK_CTRL0 0x040 > +#define CLKCTRL_SYS_CLK_EN0_REG0 0x044 > +#define CLKCTRL_SYS_CLK_EN0_REG1 0x048 > +#define CLKCTRL_SYS_CLK_EN0_REG2 0x04c > +#define CLKCTRL_SYS_CLK_EN0_REG3 0x050 > +#define CLKCTRL_SYS_CLK_EN1_REG0 0x054 > +#define CLKCTRL_SYS_CLK_EN1_REG1 0x058 > +#define CLKCTRL_SYS_CLK_EN1_REG2 0x05c > +#define CLKCTRL_SYS_CLK_EN1_REG3 0x060 > +#define CLKCTRL_SYS_CLK_VPU_EN0 0x064 > +#define CLKCTRL_SYS_CLK_VPU_EN1 0x068 > +#define CLKCTRL_AXI_CLK_CTRL0 0x06c > +#define CLKCTRL_TST_CTRL0 0x080 > +#define CLKCTRL_TST_CTRL1 0x084 > +#define CLKCTRL_CECA_CTRL0 0x088 > +#define CLKCTRL_CECA_CTRL1 0x08c > +#define CLKCTRL_CECB_CTRL0 0x090 > +#define CLKCTRL_CECB_CTRL1 0x094 > +#define CLKCTRL_SC_CLK_CTRL 0x098 > +#define CLKCTRL_RAMA_CLK_CTRL0 0x0a4 > +#define CLKCTRL_CLK12_24_CTRL 0x0a8 > +#define CLKCTRL_VID_CLK_CTRL 0x0c0 > +#define CLKCTRL_VID_CLK_CTRL2 0x0c4 > +#define CLKCTRL_VID_CLK_DIV 0x0c8 > +#define CLKCTRL_VIID_CLK_DIV 0x0cc > +#define CLKCTRL_VIID_CLK_CTRL 0x0d0 > +#define CLKCTRL_HDMI_CLK_CTRL 0x0e0 > +#define CLKCTRL_VID_PLL_CLK_DIV 0x0e4 > +#define CLKCTRL_VPU_CLK_CTRL 0x0e8 > +#define CLKCTRL_VPU_CLKB_CTRL 0x0ec > +#define CLKCTRL_VPU_CLKC_CTRL 0x0f0 > +#define CLKCTRL_VID_LOCK_CLK_CTRL 0x0f4 > +#define CLKCTRL_VDIN_MEAS_CLK_CTRL 0x0f8 > +#define CLKCTRL_VAPBCLK_CTRL 0x0fc > +#define CLKCTRL_HDCP22_CTRL 0x100 > +#define CLKCTRL_CDAC_CLK_CTRL 0x108 > +#define CLKCTRL_VDEC_CLK_CTRL 0x140 > +#define CLKCTRL_VDEC2_CLK_CTRL 0x144 > +#define CLKCTRL_VDEC3_CLK_CTRL 0x148 > +#define CLKCTRL_VDEC4_CLK_CTRL 0x14c > +#define CLKCTRL_TS_CLK_CTRL 0x158 > +#define CLKCTRL_MALI_CLK_CTRL 0x15c > +#define CLKCTRL_ETH_CLK_CTRL 0x164 > +#define CLKCTRL_NAND_CLK_CTRL 0x168 > +#define CLKCTRL_SD_EMMC_CLK_CTRL 0x16c > +#define CLKCTRL_SPICC_CLK_CTRL 0x174 > +#define CLKCTRL_GEN_CLK_CTRL 0x178 > +#define CLKCTRL_SAR_CLK_CTRL 0x17c > +#define CLKCTRL_PWM_CLK_AB_CTRL 0x180 > +#define CLKCTRL_PWM_CLK_CD_CTRL 0x184 > +#define CLKCTRL_PWM_CLK_EF_CTRL 0x188 > +#define CLKCTRL_PWM_CLK_GH_CTRL 0x18c > +#define CLKCTRL_PWM_CLK_IJ_CTRL 0x190 > +#define CLKCTRL_DEMOD_CLK_CTRL 0x200 > +#define CLKCTRL_TIMESTAMP_CTRL 0x400 > +#define CLKCTRL_TIMESTAMP_CTRL1 0x404 > +#define CLKCTRL_TIMESTAMP_CTRL2 0x40c > +#define CLKCTRL_TIMESTAMP_RD0 0x410 > +#define CLKCTRL_TIMESTAMP_RD1 0x414 > +#define CLKCTRL_TIMEBASE_CTRL0 0x418 > +#define CLKCTRL_TIMEBASE_CTRL1 0x41c > +#define CLKCTRL_EFUSE_CPU_CFG01 0x480 > +#define CLKCTRL_EFUSE_CPU_CFG2 0x484 > +#define CLKCTRL_EFUSE_ENCP_CFG0 0x488 > +#define CLKCTRL_EFUSE_MALI_CFG01 0x48c > +#define CLKCTRL_EFUSE_LOCK 0x498 > + > +/* > + * CLKID index values > + * > + * These indices are entirely contrived and do not map onto the hardware. > + * It has now been decided to expose everything by default in the DT header: > + * include/dt-bindings/clock/axg-clkc.h. Only the clocks ids we don't want > + * to expose, such as the internal muxes and dividers of composite clocks, > + * will remain defined here. > + */ > +#define CLKID_RTC_32K_CLKIN 0 > +#define CLKID_RTC_32K_DIV 1 > +#define CLKID_RTC_32K_SEL 2 > +#define CLKID_RTC_32K_XATL 3 > +#define CLKID_SYS_CLK_B_SEL 5 > +#define CLKID_SYS_CLK_B_DIV 6 > +#define CLKID_SYS_CLK_A_SEL 8 > +#define CLKID_SYS_CLK_A_DIV 9 > +#define CLKID_CECA_32K_CLKIN 12 > +#define CLKID_CECA_32K_DIV 13 > +#define CLKID_CECA_32K_SEL_PRE 14 > +#define CLKID_CECA_32K_SEL 15 > +#define CLKID_CECB_32K_CLKIN 17 > +#define CLKID_CECB_32K_DIV 18 > +#define CLKID_CECB_32K_SEL_PRE 19 > +#define CLKID_CECB_32K_SEL 20 > +#define CLKID_SC_CLK_SEL 22 > +#define CLKID_SC_CLK_DIV 23 > +#define CLKID_12_24M_CLK_GATE 25 > +#define CLKID_12M_CLK_DIV 26 > +#define CLKID_VID_PLL_DIV 28 > +#define CLKID_VID_PLL_SEL 29 > +#define CLKID_VCLK_SEL 31 > +#define CLKID_VCLK2_SEL 32 > +#define CLKID_VCLK_INPUT 33 > +#define CLKID_VCLK2_INPUT 34 > +#define CLKID_VCLK_DIV 35 > +#define CLKID_VCLK2_DIV 36 > +#define CLKID_VCLK_DIV2_EN 40 > +#define CLKID_VCLK_DIV4_EN 41 > +#define CLKID_VCLK_DIV6_EN 42 > +#define CLKID_VCLK_DIV12_EN 43 > +#define CLKID_VCLK2_DIV2_EN 45 > +#define CLKID_VCLK2_DIV4_EN 46 > +#define CLKID_VCLK2_DIV6_EN 47 > +#define CLKID_VCLK2_DIV12_EN 48 > +#define CLKID_CTS_ENCI_SEL 57 > +#define CLKID_CTS_ENCP_SEL 58 > +#define CLKID_CTS_VDAC_SEL 59 > +#define CLKID_HDMI_TX_SEL 60 > +#define CLKID_HDMI_TX 64 > +#define CLKID_HDMI_SEL 65 > +#define CLKID_HDMI_DIV 66 > +#define CLKID_TS_CLK_DIV 68 > +#define CLKID_MALI_0_SEL 70 > +#define CLKID_MALI_0_DIV 71 > +#define CLKID_MALI_1_SEL 73 > +#define CLKID_MALI_1_DIV 74 > +#define CLKID_VDEC_P0_SEL 77 > +#define CLKID_VDEC_P0_DIV 78 > +#define CLKID_VDEC_P1_SEL 80 > +#define CLKID_VDEC_P1_DIV 81 > +#define CLKID_HEVCF_P0_SEL 84 > +#define CLKID_HEVCF_P0_DIV 85 > +#define CLKID_HEVCF_P1_SEL 87 > +#define CLKID_HEVCF_P1_DIV 88 > +#define CLKID_VPU_0_SEL 91 > +#define CLKID_VPU_0_DIV 92 > +#define CLKID_VPU_1_SEL 94 > +#define CLKID_VPU_1_DIV 95 > +#define CLKID_VPU_CLKB_TMP_SEL 98 > +#define CLKID_VPU_CLKB_TMP_DIV 99 > +#define CLKID_VPU_CLKB_DIV 101 > +#define CLKID_VPU_CLKC_P0_SEL 103 > +#define CLKID_VPU_CLKC_P0_DIV 104 > +#define CLKID_VPU_CLKC_P1_SEL 106 > +#define CLKID_VPU_CLKC_P1_DIV 107 > +#define CLKID_VAPB_0_SEL 110 > +#define CLKID_VAPB_0_DIV 111 > +#define CLKID_VAPB_1_SEL 113 > +#define CLKID_VAPB_1_DIV 114 > +#define CLKID_VDIN_MEAS_SEL 118 > +#define CLKID_VDIN_MEAS_DIV 119 > +#define CLKID_SD_EMMC_C_CLK_SEL 121 > +#define CLKID_SD_EMMC_C_CLK_DIV 122 > +#define CLKID_SD_EMMC_A_CLK_SEL 124 > +#define CLKID_SD_EMMC_A_CLK_DIV 125 > +#define CLKID_SD_EMMC_B_CLK_SEL 127 > +#define CLKID_SD_EMMC_B_CLK_DIV 128 > +#define CLKID_SPICC0_SEL 130 > +#define CLKID_SPICC0_DIV 131 > +#define CLKID_PWM_A_SEL 133 > +#define CLKID_PWM_A_DIV 134 > +#define CLKID_PWM_B_SEL 136 > +#define CLKID_PWM_B_DIV 137 > +#define CLKID_PWM_C_SEL 139 > +#define CLKID_PWM_C_DIV 140 > +#define CLKID_PWM_D_SEL 142 > +#define CLKID_PWM_D_DIV 143 > +#define CLKID_PWM_E_SEL 145 > +#define CLKID_PWM_E_DIV 146 > +#define CLKID_PWM_F_SEL 148 > +#define CLKID_PWM_F_DIV 149 > +#define CLKID_PWM_G_SEL 151 > +#define CLKID_PWM_G_DIV 152 > +#define CLKID_PWM_H_SEL 154 > +#define CLKID_PWM_H_DIV 155 > +#define CLKID_PWM_I_SEL 157 > +#define CLKID_PWM_I_DIV 158 > +#define CLKID_PWM_J_SEL 160 > +#define CLKID_PWM_J_DIV 161 > +#define CLKID_SARADC_SEL 163 > +#define CLKID_SARADC_DIV 164 > +#define CLKID_GEN_SEL 166 > +#define CLKID_GEN_DIV 167 > +#define CLKID_HDCP22_ESMCLK_SEL 219 > +#define CLKID_HDCP22_ESMCLK_DIV 220 > +#define CLKID_HDCP22_SKPCLK_SEL 222 > +#define CLKID_HDCP22_SKPCLK_DIV 223 > + > +#define NR_CLKS 225 > +/* include the CLKIDs that have been made part of the DT binding */ > +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> > + > +#endif /* __MESON_S4_PERIPHERALS_H__ */ > diff --git a/include/dt-bindings/clock/amlogic,s4-peripherals-clkc.h b/include/dt-bindings/clock/amlogic,s4-peripherals-clkc.h > new file mode 100644 > index 000000000000..bbec5094d5c3 > --- /dev/null > +++ b/include/dt-bindings/clock/amlogic,s4-peripherals-clkc.h > @@ -0,0 +1,131 @@ > +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ > +/* > + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. > + * Author: Yu Tu <yu.tu@amlogic.com> > + */ > + > +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PERIPHERALS_CLKC_H > +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PERIPHERALS_CLKC_H > + > +/* > + * CLKID index values > + */ > + > +#define CLKID_RTC_CLK 4 > +#define CLKID_SYS_CLK_B_GATE 7 > +#define CLKID_SYS_CLK_A_GATE 10 > +#define CLKID_SYS_CLK 11 > +#define CLKID_CECA_32K_CLKOUT 16 > +#define CLKID_CECB_32K_CLKOUT 21 > +#define CLKID_SC_CLK_GATE 24 > +#define CLKID_12_24M_CLK_SEL 27 > +#define CLKID_VID_PLL 30 > +#define CLKID_VCLK 37 > +#define CLKID_VCLK2 38 > +#define CLKID_VCLK_DIV1 39 > +#define CLKID_VCLK2_DIV1 44 > +#define CLKID_VCLK_DIV2 49 > +#define CLKID_VCLK_DIV4 50 > +#define CLKID_VCLK_DIV6 51 > +#define CLKID_VCLK_DIV12 52 > +#define CLKID_VCLK2_DIV2 53 > +#define CLKID_VCLK2_DIV4 54 > +#define CLKID_VCLK2_DIV6 55 > +#define CLKID_VCLK2_DIV12 56 > +#define CLKID_CTS_ENCI 61 > +#define CLKID_CTS_ENCP 62 > +#define CLKID_CTS_VDAC 63 > +#define CLKID_HDMI 67 > +#define CLKID_TS_CLK_GATE 69 > +#define CLKID_MALI_0 72 > +#define CLKID_MALI_1 75 > +#define CLKID_MALI 76 > +#define CLKID_VDEC_P0 79 > +#define CLKID_VDEC_P1 82 > +#define CLKID_VDEC_SEL 83 > +#define CLKID_HEVCF_P0 86 > +#define CLKID_HEVCF_P1 89 > +#define CLKID_HEVCF_SEL 90 > +#define CLKID_VPU_0 93 > +#define CLKID_VPU_1 96 > +#define CLKID_VPU 97 > +#define CLKID_VPU_CLKB_TMP 100 > +#define CLKID_VPU_CLKB 102 > +#define CLKID_VPU_CLKC_P0 105 > +#define CLKID_VPU_CLKC_P1 108 > +#define CLKID_VPU_CLKC_SEL 109 > +#define CLKID_VAPB_0 112 > +#define CLKID_VAPB_1 115 > +#define CLKID_VAPB 116 > +#define CLKID_GE2D 117 > +#define CLKID_VDIN_MEAS_GATE 120 > +#define CLKID_SD_EMMC_C_CLK 123 > +#define CLKID_SD_EMMC_A_CLK 126 > +#define CLKID_SD_EMMC_B_CLK 129 > +#define CLKID_SPICC0_GATE 132 > +#define CLKID_PWM_A_GATE 135 > +#define CLKID_PWM_B_GATE 138 > +#define CLKID_PWM_C_GATE 141 > +#define CLKID_PWM_D_GATE 144 > +#define CLKID_PWM_E_GATE 147 > +#define CLKID_PWM_F_GATE 150 > +#define CLKID_PWM_G_GATE 153 > +#define CLKID_PWM_H_GATE 156 > +#define CLKID_PWM_I_GATE 159 > +#define CLKID_PWM_J_GATE 162 > +#define CLKID_SARADC_GATE 165 > +#define CLKID_GEN_GATE 168 > +#define CLKID_DDR 169 > +#define CLKID_DOS 170 > +#define CLKID_ETHPHY 171 > +#define CLKID_MALI_GATE 172 > +#define CLKID_AOCPU 173 > +#define CLKID_AUCPU 174 > +#define CLKID_CEC 175 > +#define CLKID_SD_EMMC_A 176 > +#define CLKID_SD_EMMC_B 177 > +#define CLKID_NAND 178 > +#define CLKID_SMARTCARD 179 > +#define CLKID_ACODEC 180 > +#define CLKID_SPIFC 181 > +#define CLKID_MSR_CLK 182 > +#define CLKID_IR_CTRL 183 > +#define CLKID_AUDIO 184 > +#define CLKID_ETH 185 > +#define CLKID_UART_A 186 > +#define CLKID_UART_B 187 > +#define CLKID_UART_C 188 > +#define CLKID_UART_D 189 > +#define CLKID_UART_E 190 > +#define CLKID_AIFIFO 191 > +#define CLKID_TS_DDR 192 > +#define CLKID_TS_PLL 193 > +#define CLKID_G2D 194 > +#define CLKID_SPICC0 195 > +#define CLKID_SPICC1 196 > +#define CLKID_USB 197 > +#define CLKID_I2C_M_A 198 > +#define CLKID_I2C_M_B 199 > +#define CLKID_I2C_M_C 200 > +#define CLKID_I2C_M_D 201 > +#define CLKID_I2C_M_E 202 > +#define CLKID_HDMITX_APB 203 > +#define CLKID_I2C_S_A 204 > +#define CLKID_USB1_TO_DDR 205 > +#define CLKID_HDCP22 206 > +#define CLKID_MMC_APB 207 > +#define CLKID_RSA 208 > +#define CLKID_CPU_DEBUG 209 > +#define CLKID_VPU_INTR 210 > +#define CLKID_DEMOD 211 > +#define CLKID_SAR_ADC 212 > +#define CLKID_GIC 213 > +#define CLKID_PWM_AB 214 > +#define CLKID_PWM_CD 215 > +#define CLKID_PWM_EF 216 > +#define CLKID_PWM_GH 217 > +#define CLKID_PWM_IJ 218 > +#define CLKID_HDCP22_ESMCLK_GATE 221 > +#define CLKID_HDCP22_SKPCLK_GATE 224 > + > +#endif /* _DT_BINDINGS_CLOCK_AMLOGIC_S4_PERIPHERALS_CLKC_H */ ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 3/4] clk: meson: s4: add s4 SoC peripheral clock controller driver and bindings @ 2022-11-25 9:54 ` Jerome Brunet 0 siblings, 0 replies; 109+ messages in thread From: Jerome Brunet @ 2022-11-25 9:54 UTC (permalink / raw) To: Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On Wed 23 Nov 2022 at 10:13, Yu Tu <yu.tu@amlogic.com> wrote: > Add the peripherals clock controller found and bindings in the s4 SoC family. > > Signed-off-by: Yu Tu <yu.tu@amlogic.com> > --- > .../clock/amlogic,s4-peripherals-clkc.yaml | 105 + > drivers/clk/meson/Kconfig | 12 + > drivers/clk/meson/Makefile | 1 + > drivers/clk/meson/s4-peripherals.c | 3783 +++++++++++++++++ > drivers/clk/meson/s4-peripherals.h | 218 + > .../clock/amlogic,s4-peripherals-clkc.h | 131 + > 6 files changed, 4250 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml > create mode 100644 drivers/clk/meson/s4-peripherals.c > create mode 100644 drivers/clk/meson/s4-peripherals.h > create mode 100644 include/dt-bindings/clock/amlogic,s4-peripherals-clkc.h > > diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml > new file mode 100644 > index 000000000000..d1ea05ab7ec9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml > @@ -0,0 +1,105 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/clock/amlogic,s4-peripherals-clkc.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Amlogic Meson S serials Peripherals Clock Controller > + > +maintainers: > + - Neil Armstrong <narmstrong@baylibre.com> > + - Jerome Brunet <jbrunet@baylibre.com> > + - Yu Tu <yu.hu@amlogic.com> > + > + > +properties: > + compatible: > + const: amlogic,s4-peripherals-clkc > + > + reg: > + maxItems: 1 > + > + clocks: > + items: > + - description: input fixed pll div2 > + - description: input fixed pll div2p5 > + - description: input fixed pll div3 > + - description: input fixed pll div4 > + - description: input fixed pll div5 > + - description: input fixed pll div7 > + - description: input hifi pll > + - description: input gp0 pll > + - description: input mpll0 > + - description: input mpll1 > + - description: input mpll2 > + - description: input mpll3 > + - description: input hdmi pll > + - description: input oscillator (usually at 24MHz) > + - description: input external 32kHz reference (optional) > + > + clock-names: > + items: > + - const: fclk_div2 > + - const: fclk_div2p5 > + - const: fclk_div3 > + - const: fclk_div4 > + - const: fclk_div5 > + - const: fclk_div7 > + - const: hifi_pll > + - const: gp0_pll > + - const: mpll0 > + - const: mpll1 > + - const: mpll2 > + - const: mpll3 > + - const: hdmi_pll > + - const: xtal > + - const: ext_32k > + > + "#clock-cells": > + const: 1 > + > +required: > + - compatible > + - reg > + - clocks > + - clock-names > + - "#clock-cells" > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> > + > + /* 32KHz reference crystal */ > + ext_32k: ref32k { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <32000>; > + }; > + > + clkc_periphs: clock-controller@fe000000 { > + compatible = "amlogic,s4-peripherals-clkc"; > + reg = <0xfe000000 0x49c>; > + clocks = <&clkc_pll 3>, > + <&clkc_pll 13>, > + <&clkc_pll 5>, > + <&clkc_pll 7>, > + <&clkc_pll 9>, > + <&clkc_pll 11>, > + <&clkc_pll 17>, > + <&clkc_pll 15>, > + <&clkc_pll 25>, > + <&clkc_pll 27>, > + <&clkc_pll 29>, > + <&clkc_pll 31>, > + <&clkc_pll 20>, > + <&xtal>, > + <&ext_32k>; > + clock-names = "fclk_div2", "fclk_div2p5", "fclk_div3", "fclk_div4", > + "fclk_div5", "fclk_div7", "hifi_pll", "gp0_pll", > + "mpll0", "mpll1", "mpll2", "mpll3", "hdmi_pll", "xtal", > + "ext_32k"; > + #clock-cells = <1>; > + }; > +... > diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig > index a663c90a3f3b..a6eb9fa15c74 100644 > --- a/drivers/clk/meson/Kconfig > +++ b/drivers/clk/meson/Kconfig > @@ -128,4 +128,16 @@ config COMMON_CLK_S4_PLL > aka s4. Amlogic S805X2 and S905Y4 devices include AQ222 and AQ229. > Say Y if you want the board to work, because plls are the parent of most > peripherals. > + > +config COMMON_CLK_S4 > + tristate "S4 SoC Peripherals clock controllers support" > + depends on ARM64 > + default y > + select COMMON_CLK_MESON_REGMAP > + select COMMON_CLK_MESON_DUALDIV > + select COMMON_CLK_MESON_VID_PLL_DIV > + help > + Support for the Peripherals clock controller on Amlogic S805X2 and S905Y4 > + devices, aka s4. Amlogic S805X2 and S905Y4 devices include AQ222 and AQ229. > + Say Y if you want peripherals to work. > endmenu > diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile > index 376f49cc13f1..c9130afccb48 100644 > --- a/drivers/clk/meson/Makefile > +++ b/drivers/clk/meson/Makefile > @@ -20,3 +20,4 @@ obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o > obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o > obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o > obj-$(CONFIG_COMMON_CLK_S4_PLL) += s4-pll.o > +obj-$(CONFIG_COMMON_CLK_S4) += s4-peripherals.o > diff --git a/drivers/clk/meson/s4-peripherals.c b/drivers/clk/meson/s4-peripherals.c > new file mode 100644 > index 000000000000..8ce5156d3510 > --- /dev/null > +++ b/drivers/clk/meson/s4-peripherals.c > @@ -0,0 +1,3783 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Amlogic Meson-S4 Peripherals Clock Controller Driver > + * > + * Copyright (c) 2021 Amlogic, inc. > + * Author: Yu Tu <yu.tu@amlogic.com> > + */ > + > +#include <linux/clk-provider.h> > +#include <linux/of_device.h> > +#include <linux/platform_device.h> > + > +#include "clk-regmap.h" > +#include "vid-pll-div.h" > +#include "clk-dualdiv.h" > +#include "s4-peripherals.h" > + > +static struct clk_regmap s4_rtc_32k_by_oscin_clkin = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_RTC_BY_OSCIN_CTRL0, > + .bit_idx = 31, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "rtc_32k_by_oscin_clkin", > + .ops = &clk_regmap_gate_ops, > + .parent_data = (const struct clk_parent_data []) { > + { .fw_name = "xtal", } > + }, > + .num_parents = 1, > + }, > +}; > + > +static const struct meson_clk_dualdiv_param s4_32k_div_table[] = { > + { > + .dual = 1, > + .n1 = 733, > + .m1 = 8, > + .n2 = 732, > + .m2 = 11, > + }, > + {} > +}; > + > +static struct clk_regmap s4_rtc_32k_by_oscin_div = { > + .data = &(struct meson_clk_dualdiv_data){ > + .n1 = { > + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL0, > + .shift = 0, > + .width = 12, > + }, > + .n2 = { > + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL0, > + .shift = 12, > + .width = 12, > + }, > + .m1 = { > + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL1, > + .shift = 0, > + .width = 12, > + }, > + .m2 = { > + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL1, > + .shift = 12, > + .width = 12, > + }, > + .dual = { > + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL0, > + .shift = 28, > + .width = 1, > + }, > + .table = s4_32k_div_table, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "rtc_32k_by_oscin_div", > + .ops = &meson_clk_dualdiv_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_rtc_32k_by_oscin_clkin.hw > + }, > + .num_parents = 1, > + }, > +}; > + > +static struct clk_regmap s4_rtc_32k_by_oscin_sel = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_RTC_BY_OSCIN_CTRL1, > + .mask = 0x1, > + .shift = 24, > + .flags = CLK_MUX_ROUND_CLOSEST, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "rtc_32k_by_oscin_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_rtc_32k_by_oscin_div.hw, > + &s4_rtc_32k_by_oscin_clkin.hw, > + }, > + .num_parents = 2, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_rtc_32k_by_oscin = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_RTC_BY_OSCIN_CTRL0, > + .bit_idx = 30, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "rtc_32k_by_oscin", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_rtc_32k_by_oscin_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +/* > + * This RTC clock can be supplied by an external 32KHz crystal oscillator. > + * If it is used, it should be documented in using fw_name and documented in the > + * Bindings. Not currently in use on this board, so skip it. > + */ > +static u32 rtc_clk_sel[] = { 0, 1 }; No reason to do that > +static const struct clk_parent_data rtc_clk_sel_parent_data[] = { > + { .hw = &s4_rtc_32k_by_oscin.hw }, > + { .hw = &s4_rtc_32k_by_oscin_div.hw }, > + { .fw_name = "ext_32k", } > +}; > + > +static struct clk_regmap s4_rtc_clk = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_RTC_CTRL, > + .mask = 0x3, > + .shift = 0, > + .table = rtc_clk_sel, > + .flags = CLK_MUX_ROUND_CLOSEST, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "rtc_clk_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_data = rtc_clk_sel_parent_data, > + .num_parents = 2, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +/* The index 5 is AXI_CLK, which is dedicated to AXI. So skip it. */ > +static u32 mux_table_sys_ab_clk_sel[] = { 0, 1, 2, 3, 4, 6, 7 }; > +static const struct clk_parent_data sys_ab_clk_parent_data[] = { > + { .fw_name = "xtal" }, > + { .fw_name = "fclk_div2" }, > + { .fw_name = "fclk_div3" }, > + { .fw_name = "fclk_div4" }, > + { .fw_name = "fclk_div5" }, > + { .fw_name = "fclk_div7" }, > + { .hw = &s4_rtc_clk.hw } > +}; > + > +static struct clk_regmap s4_sysclk_b_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_SYS_CLK_CTRL0, > + .mask = 0x7, > + .shift = 26, > + .table = mux_table_sys_ab_clk_sel, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "sysclk_b_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_data = sys_ab_clk_parent_data, > + .num_parents = ARRAY_SIZE(sys_ab_clk_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_sysclk_b_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_SYS_CLK_CTRL0, > + .shift = 16, > + .width = 10, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "sysclk_b_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_sysclk_b_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_sysclk_b = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_SYS_CLK_CTRL0, > + .bit_idx = 29, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "sysclk_b", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_sysclk_b_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_sysclk_a_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_SYS_CLK_CTRL0, > + .mask = 0x7, > + .shift = 10, > + .table = mux_table_sys_ab_clk_sel, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "sysclk_a_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_data = sys_ab_clk_parent_data, > + .num_parents = ARRAY_SIZE(sys_ab_clk_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_sysclk_a_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_SYS_CLK_CTRL0, > + .shift = 0, > + .width = 10, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "sysclk_a_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_sysclk_a_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_sysclk_a = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_SYS_CLK_CTRL0, > + .bit_idx = 13, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "sysclk_a", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_sysclk_a_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_sys_clk = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_SYS_CLK_CTRL0, > + .mask = 0x1, > + .shift = 31, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "sys_clk", > + .ops = &clk_regmap_mux_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_sysclk_a.hw, > + &s4_sysclk_b.hw > + }, > + .num_parents = 2, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_ceca_32k_clkin = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_CECA_CTRL0, > + .bit_idx = 31, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "ceca_32k_clkin", > + .ops = &clk_regmap_gate_ops, > + .parent_data = (const struct clk_parent_data []) { > + { .fw_name = "xtal", } > + }, > + .num_parents = 1, > + }, > +}; > + > +static struct clk_regmap s4_ceca_32k_div = { > + .data = &(struct meson_clk_dualdiv_data){ > + .n1 = { > + .reg_off = CLKCTRL_CECA_CTRL0, > + .shift = 0, > + .width = 12, > + }, > + .n2 = { > + .reg_off = CLKCTRL_CECA_CTRL0, > + .shift = 12, > + .width = 12, > + }, > + .m1 = { > + .reg_off = CLKCTRL_CECA_CTRL1, > + .shift = 0, > + .width = 12, > + }, > + .m2 = { > + .reg_off = CLKCTRL_CECA_CTRL1, > + .shift = 12, > + .width = 12, > + }, > + .dual = { > + .reg_off = CLKCTRL_CECA_CTRL0, > + .shift = 28, > + .width = 1, > + }, > + .table = s4_32k_div_table, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "ceca_32k_div", > + .ops = &meson_clk_dualdiv_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_ceca_32k_clkin.hw > + }, > + .num_parents = 1, > + }, > +}; > + > +static struct clk_regmap s4_ceca_32k_sel_pre = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_CECA_CTRL1, > + .mask = 0x1, > + .shift = 24, > + .flags = CLK_MUX_ROUND_CLOSEST, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "ceca_32k_sel_pre", > + .ops = &clk_regmap_mux_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_ceca_32k_div.hw, > + &s4_ceca_32k_clkin.hw > + }, > + .num_parents = 2, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_ceca_32k_sel = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_CECA_CTRL1, > + .mask = 0x1, > + .shift = 31, > + .flags = CLK_MUX_ROUND_CLOSEST, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "ceca_32k_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_ceca_32k_sel_pre.hw, > + &s4_rtc_clk.hw > + }, > + .num_parents = 2, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_ceca_32k_clkout = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_CECA_CTRL0, > + .bit_idx = 30, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "ceca_32k_clkout", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_ceca_32k_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_cecb_32k_clkin = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_CECB_CTRL0, > + .bit_idx = 31, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "cecb_32k_clkin", > + .ops = &clk_regmap_gate_ops, > + .parent_data = (const struct clk_parent_data []) { > + { .fw_name = "xtal", } > + }, > + .num_parents = 1, > + }, > +}; > + > +static struct clk_regmap s4_cecb_32k_div = { > + .data = &(struct meson_clk_dualdiv_data){ > + .n1 = { > + .reg_off = CLKCTRL_CECB_CTRL0, > + .shift = 0, > + .width = 12, > + }, > + .n2 = { > + .reg_off = CLKCTRL_CECB_CTRL0, > + .shift = 12, > + .width = 12, > + }, > + .m1 = { > + .reg_off = CLKCTRL_CECB_CTRL1, > + .shift = 0, > + .width = 12, > + }, > + .m2 = { > + .reg_off = CLKCTRL_CECB_CTRL1, > + .shift = 12, > + .width = 12, > + }, > + .dual = { > + .reg_off = CLKCTRL_CECB_CTRL0, > + .shift = 28, > + .width = 1, > + }, > + .table = s4_32k_div_table, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "cecb_32k_div", > + .ops = &meson_clk_dualdiv_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_cecb_32k_clkin.hw > + }, > + .num_parents = 1, > + }, > +}; > + > +static struct clk_regmap s4_cecb_32k_sel_pre = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_CECB_CTRL1, > + .mask = 0x1, > + .shift = 24, > + .flags = CLK_MUX_ROUND_CLOSEST, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "cecb_32k_sel_pre", > + .ops = &clk_regmap_mux_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_cecb_32k_div.hw, > + &s4_cecb_32k_clkin.hw > + }, > + .num_parents = 2, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_cecb_32k_sel = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_CECB_CTRL1, > + .mask = 0x1, > + .shift = 31, > + .flags = CLK_MUX_ROUND_CLOSEST, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "cecb_32k_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_cecb_32k_sel_pre.hw, > + &s4_rtc_clk.hw > + }, > + .num_parents = 2, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_cecb_32k_clkout = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_CECB_CTRL0, > + .bit_idx = 30, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "cecb_32k_clkout", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_cecb_32k_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static const struct clk_parent_data s4_sc_parent_data[] = { > + { .fw_name = "fclk_div4" }, > + { .fw_name = "fclk_div3" }, > + { .fw_name = "fclk_div5" }, > + { .fw_name = "xtal", } > +}; > + > +static struct clk_regmap s4_sc_clk_mux = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_SC_CLK_CTRL, > + .mask = 0x3, > + .shift = 9, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "sc_clk_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_sc_parent_data, > + .num_parents = ARRAY_SIZE(s4_sc_parent_data), > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_sc_clk_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_SC_CLK_CTRL, > + .shift = 0, > + .width = 8, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "sc_clk_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_sc_clk_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_sc_clk_gate = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_SC_CLK_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "sc_clk_gate", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_sc_clk_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_12_24M_clk_gate = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_CLK12_24_CTRL, > + .bit_idx = 11, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "12_24m_gate", > + .ops = &clk_regmap_gate_ops, > + .parent_data = (const struct clk_parent_data []) { > + { .fw_name = "xtal", } > + }, > + .num_parents = 1, > + }, > +}; > + > +static struct clk_fixed_factor s4_12M_clk_div = { > + .mult = 1, > + .div = 2, > + .hw.init = &(struct clk_init_data){ > + .name = "12M", > + .ops = &clk_fixed_factor_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_12_24M_clk_gate.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_12_24M_clk = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_CLK12_24_CTRL, > + .mask = 0x1, > + .shift = 10, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "12_24m", > + .ops = &clk_regmap_mux_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_12_24M_clk_gate.hw, > + &s4_12M_clk_div.hw, > + }, > + .num_parents = 2, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +/* Video Clocks */ > +static struct clk_regmap s4_vid_pll_div = { > + .data = &(struct meson_vid_pll_div_data){ > + .val = { > + .reg_off = CLKCTRL_VID_PLL_CLK_DIV, > + .shift = 0, > + .width = 15, > + }, > + .sel = { > + .reg_off = CLKCTRL_VID_PLL_CLK_DIV, > + .shift = 16, > + .width = 2, > + }, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vid_pll_div", > + /* Same to g12a */ > + .ops = &meson_vid_pll_div_ro_ops, Please add an helpful explanation. 'Same to g12a' is not helpful. > + .parent_data = (const struct clk_parent_data []) { > + { .fw_name = "hdmi_pll", } > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vid_pll_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VID_PLL_CLK_DIV, > + .mask = 0x1, > + .shift = 18, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vid_pll_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_data = (const struct clk_parent_data []) { > + { .hw = &s4_vid_pll_div.hw }, > + { .fw_name = "hdmi_pll", } > + }, > + .num_parents = 2, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vid_pll = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VID_PLL_CLK_DIV, > + .bit_idx = 19, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vid_pll", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vid_pll_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static const struct clk_parent_data s4_vclk_parent_data[] = { > + { .hw = &s4_vid_pll.hw }, > + { .fw_name = "gp0_pll", }, > + { .fw_name = "hifi_pll", }, > + { .fw_name = "mpll1", }, > + { .fw_name = "fclk_div3", }, > + { .fw_name = "fclk_div4", }, > + { .fw_name = "fclk_div5", }, > + { .fw_name = "fclk_div7", }, > +}; > + > +static struct clk_regmap s4_vclk_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VID_CLK_CTRL, > + .mask = 0x7, > + .shift = 16, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vclk_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_vclk_parent_data, > + .num_parents = ARRAY_SIZE(s4_vclk_parent_data), > + }, You are stopping rate propagation here. It deserves an explanation. Same goes below. > +}; > + > +static struct clk_regmap s4_vclk2_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VIID_CLK_CTRL, > + .mask = 0x7, > + .shift = 16, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vclk2_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_vclk_parent_data, > + .num_parents = ARRAY_SIZE(s4_vclk_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_vclk_input = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VID_CLK_DIV, > + .bit_idx = 16, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vclk_input", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vclk_sel.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vclk2_input = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VIID_CLK_DIV, > + .bit_idx = 16, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vclk2_input", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2_sel.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vclk_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_VID_CLK_DIV, > + .shift = 0, > + .width = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vclk_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vclk_input.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vclk2_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_VIID_CLK_DIV, > + .shift = 0, > + .width = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vclk2_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vclk2_input.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vclk = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VID_CLK_CTRL, > + .bit_idx = 19, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vclk", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vclk_div.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vclk2 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VIID_CLK_CTRL, > + .bit_idx = 19, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vclk2", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2_div.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vclk_div1 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VID_CLK_CTRL, > + .bit_idx = 0, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vclk_div1", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vclk_div2_en = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VID_CLK_CTRL, > + .bit_idx = 1, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vclk_div2_en", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vclk_div4_en = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VID_CLK_CTRL, > + .bit_idx = 2, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vclk_div4_en", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vclk_div6_en = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VID_CLK_CTRL, > + .bit_idx = 3, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vclk_div6_en", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vclk_div12_en = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VID_CLK_CTRL, > + .bit_idx = 4, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vclk_div12_en", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vclk2_div1 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VIID_CLK_CTRL, > + .bit_idx = 0, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vclk2_div1", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vclk2_div2_en = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VIID_CLK_CTRL, > + .bit_idx = 1, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vclk2_div2_en", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vclk2_div4_en = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VIID_CLK_CTRL, > + .bit_idx = 2, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vclk2_div4_en", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vclk2_div6_en = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VIID_CLK_CTRL, > + .bit_idx = 3, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vclk2_div6_en", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vclk2_div12_en = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VIID_CLK_CTRL, > + .bit_idx = 4, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vclk2_div12_en", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_fixed_factor s4_vclk_div2 = { > + .mult = 1, > + .div = 2, > + .hw.init = &(struct clk_init_data){ > + .name = "vclk_div2", > + .ops = &clk_fixed_factor_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vclk_div2_en.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_fixed_factor s4_vclk_div4 = { > + .mult = 1, > + .div = 4, > + .hw.init = &(struct clk_init_data){ > + .name = "vclk_div4", > + .ops = &clk_fixed_factor_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vclk_div4_en.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_fixed_factor s4_vclk_div6 = { > + .mult = 1, > + .div = 6, > + .hw.init = &(struct clk_init_data){ > + .name = "vclk_div6", > + .ops = &clk_fixed_factor_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vclk_div6_en.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_fixed_factor s4_vclk_div12 = { > + .mult = 1, > + .div = 12, > + .hw.init = &(struct clk_init_data){ > + .name = "vclk_div12", > + .ops = &clk_fixed_factor_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vclk_div12_en.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_fixed_factor s4_vclk2_div2 = { > + .mult = 1, > + .div = 2, > + .hw.init = &(struct clk_init_data){ > + .name = "vclk2_div2", > + .ops = &clk_fixed_factor_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vclk2_div2_en.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_fixed_factor s4_vclk2_div4 = { > + .mult = 1, > + .div = 4, > + .hw.init = &(struct clk_init_data){ > + .name = "vclk2_div4", > + .ops = &clk_fixed_factor_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vclk2_div4_en.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_fixed_factor s4_vclk2_div6 = { > + .mult = 1, > + .div = 6, > + .hw.init = &(struct clk_init_data){ > + .name = "vclk2_div6", > + .ops = &clk_fixed_factor_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vclk2_div6_en.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_fixed_factor s4_vclk2_div12 = { > + .mult = 1, > + .div = 12, > + .hw.init = &(struct clk_init_data){ > + .name = "vclk2_div12", > + .ops = &clk_fixed_factor_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vclk2_div12_en.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +/* The 5,6,7 indexes corresponds to no real clock, so there are not used. */ > +static u32 mux_table_cts_sel[] = { 0, 1, 2, 3, 4, 8, 9, 10, 11, 12 }; > +static const struct clk_hw *s4_cts_parent_hws[] = { > + &s4_vclk_div1.hw, > + &s4_vclk_div2.hw, > + &s4_vclk_div4.hw, > + &s4_vclk_div6.hw, > + &s4_vclk_div12.hw, > + &s4_vclk2_div1.hw, > + &s4_vclk2_div2.hw, > + &s4_vclk2_div4.hw, > + &s4_vclk2_div6.hw, > + &s4_vclk2_div12.hw > +}; > + > +static struct clk_regmap s4_cts_enci_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VID_CLK_DIV, > + .mask = 0xf, > + .shift = 28, > + .table = mux_table_cts_sel, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "cts_enci_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_hws = s4_cts_parent_hws, > + .num_parents = ARRAY_SIZE(s4_cts_parent_hws), > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_cts_encp_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VID_CLK_DIV, > + .mask = 0xf, > + .shift = 20, > + .table = mux_table_cts_sel, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "cts_encp_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_hws = s4_cts_parent_hws, > + .num_parents = ARRAY_SIZE(s4_cts_parent_hws), > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_cts_vdac_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VIID_CLK_DIV, > + .mask = 0xf, > + .shift = 28, > + .table = mux_table_cts_sel, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "cts_vdac_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_hws = s4_cts_parent_hws, > + .num_parents = ARRAY_SIZE(s4_cts_parent_hws), > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +/* The 5,6,7 indexes corresponds to no real clock, so there are not used. */ > +static u32 mux_table_hdmi_tx_sel[] = { 0, 1, 2, 3, 4, 8, 9, 10, 11, 12 }; > +static const struct clk_hw *s4_cts_hdmi_tx_parent_hws[] = { > + &s4_vclk_div1.hw, > + &s4_vclk_div2.hw, > + &s4_vclk_div4.hw, > + &s4_vclk_div6.hw, > + &s4_vclk_div12.hw, > + &s4_vclk2_div1.hw, > + &s4_vclk2_div2.hw, > + &s4_vclk2_div4.hw, > + &s4_vclk2_div6.hw, > + &s4_vclk2_div12.hw > +}; > + > +static struct clk_regmap s4_hdmi_tx_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_HDMI_CLK_CTRL, > + .mask = 0xf, > + .shift = 16, > + .table = mux_table_hdmi_tx_sel, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "hdmi_tx_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_hws = s4_cts_hdmi_tx_parent_hws, > + .num_parents = ARRAY_SIZE(s4_cts_hdmi_tx_parent_hws), > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_cts_enci = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VID_CLK_CTRL2, > + .bit_idx = 0, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "cts_enci", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_cts_enci_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_cts_encp = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VID_CLK_CTRL2, > + .bit_idx = 2, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "cts_encp", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_cts_encp_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_cts_vdac = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VID_CLK_CTRL2, > + .bit_idx = 4, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "cts_vdac", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_cts_vdac_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_hdmi_tx = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VID_CLK_CTRL2, > + .bit_idx = 5, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "hdmi_tx", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_hdmi_tx_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +/* HDMI Clocks */ > +static const struct clk_parent_data s4_hdmi_parent_data[] = { > + { .fw_name = "xtal", }, > + { .fw_name = "fclk_div4", }, > + { .fw_name = "fclk_div3", }, > + { .fw_name = "fclk_div5", } > +}; > + > +static struct clk_regmap s4_hdmi_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_HDMI_CLK_CTRL, > + .mask = 0x3, > + .shift = 9, > + .flags = CLK_MUX_ROUND_CLOSEST, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "hdmi_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_hdmi_parent_data, > + .num_parents = ARRAY_SIZE(s4_hdmi_parent_data), > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_hdmi_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_HDMI_CLK_CTRL, > + .shift = 0, > + .width = 7, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "hdmi_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_hdmi_sel.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_hdmi = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_HDMI_CLK_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "hdmi", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_hdmi_div.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_ts_clk_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_TS_CLK_CTRL, > + .shift = 0, > + .width = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "ts_clk_div", > + .ops = &clk_regmap_divider_ops, > + .parent_data = &(const struct clk_parent_data) { > + .fw_name = "xtal", > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_ts_clk_gate = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_TS_CLK_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "ts_clk", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_ts_clk_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +/* > + * The MALI IP is clocked by two identical clocks (mali_0 and mali_1) > + * muxed by a glitch-free switch. The CCF can manage this glitch-free > + * mux because it does top-to-bottom updates the each clock tree and > + * switches to the "inactive" one when CLK_SET_RATE_GATE is set. > + */ > +static const struct clk_parent_data s4_mali_0_1_parent_data[] = { > + { .fw_name = "xtal", }, > + { .fw_name = "gp0_pll", }, > + { .fw_name = "hifi_pll", }, > + { .fw_name = "fclk_div2p5", }, > + { .fw_name = "fclk_div3", }, > + { .fw_name = "fclk_div4", }, > + { .fw_name = "fclk_div5", }, > + { .fw_name = "fclk_div7", } > +}; > + > +static struct clk_regmap s4_mali_0_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_MALI_CLK_CTRL, > + .mask = 0x7, > + .shift = 9, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "mali_0_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_mali_0_1_parent_data, > + .num_parents = ARRAY_SIZE(s4_mali_0_1_parent_data), > + /* > + * Don't request the parent to change the rate because > + * all GPU frequencies can be derived from the fclk_* > + * clocks and one special GP0_PLL setting. This is > + * important because we need the MPLL clocks for audio. > + */ > + .flags = 0, > + }, > +}; > + > +static struct clk_regmap s4_mali_0_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_MALI_CLK_CTRL, > + .shift = 0, > + .width = 7, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "mali_0_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_mali_0_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_mali_0 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_MALI_CLK_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "mali_0", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_mali_0_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_mali_1_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_MALI_CLK_CTRL, > + .mask = 0x7, > + .shift = 25, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "mali_1_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_mali_0_1_parent_data, > + .num_parents = ARRAY_SIZE(s4_mali_0_1_parent_data), > + .flags = 0, > + }, > +}; > + > +static struct clk_regmap s4_mali_1_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_MALI_CLK_CTRL, > + .shift = 16, > + .width = 7, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "mali_1_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_mali_1_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_mali_1 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_MALI_CLK_CTRL, > + .bit_idx = 24, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "mali_1", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_mali_1_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static const struct clk_hw *s4_mali_parent_hws[] = { > + &s4_mali_0.hw, > + &s4_mali_1.hw > +}; > + > +static struct clk_regmap s4_mali_mux = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_MALI_CLK_CTRL, > + .mask = 1, > + .shift = 31, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "mali", > + .ops = &clk_regmap_mux_ops, > + .parent_hws = s4_mali_parent_hws, > + .num_parents = 2, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +/* VDEC clocks */ > +static const struct clk_parent_data s4_dec_parent_data[] = { > + { .fw_name = "fclk_div2p5", }, > + { .fw_name = "fclk_div3", }, > + { .fw_name = "fclk_div4", }, > + { .fw_name = "fclk_div5", }, > + { .fw_name = "fclk_div7", }, > + { .fw_name = "hifi_pll", }, > + { .fw_name = "gp0_pll", }, > + { .fw_name = "xtal", } > +}; > + > +static struct clk_regmap s4_vdec_p0_mux = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VDEC_CLK_CTRL, > + .mask = 0x7, > + .shift = 9, > + .flags = CLK_MUX_ROUND_CLOSEST, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vdec_p0_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_dec_parent_data, > + .num_parents = ARRAY_SIZE(s4_dec_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_vdec_p0_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_VDEC_CLK_CTRL, > + .shift = 0, > + .width = 7, > + .flags = CLK_DIVIDER_ROUND_CLOSEST, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vdec_p0_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vdec_p0_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vdec_p0 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VDEC_CLK_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vdec_p0", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vdec_p0_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vdec_p1_mux = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VDEC3_CLK_CTRL, > + .mask = 0x7, > + .shift = 9, > + .flags = CLK_MUX_ROUND_CLOSEST, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vdec_p1_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_dec_parent_data, > + .num_parents = ARRAY_SIZE(s4_dec_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_vdec_p1_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_VDEC3_CLK_CTRL, > + .shift = 0, > + .width = 7, > + .flags = CLK_DIVIDER_ROUND_CLOSEST, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vdec_p1_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vdec_p1_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vdec_p1 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VDEC3_CLK_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vdec_p1", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vdec_p1_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static const struct clk_hw *s4_vdec_mux_parent_hws[] = { > + &s4_vdec_p0.hw, > + &s4_vdec_p1.hw > +}; > + > +static struct clk_regmap s4_vdec_mux = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VDEC3_CLK_CTRL, > + .mask = 0x1, > + .shift = 15, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vdec_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_hws = s4_vdec_mux_parent_hws, > + .num_parents = ARRAY_SIZE(s4_vdec_mux_parent_hws), > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_hevcf_p0_mux = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VDEC2_CLK_CTRL, > + .mask = 0x7, > + .shift = 9, > + .flags = CLK_MUX_ROUND_CLOSEST, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "hevcf_p0_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_dec_parent_data, > + .num_parents = ARRAY_SIZE(s4_dec_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_hevcf_p0_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_VDEC2_CLK_CTRL, > + .shift = 0, > + .width = 7, > + .flags = CLK_DIVIDER_ROUND_CLOSEST, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "hevcf_p0_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_hevcf_p0_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_hevcf_p0 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VDEC2_CLK_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "hevcf_p0_gate", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_hevcf_p0_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_hevcf_p1_mux = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VDEC4_CLK_CTRL, > + .mask = 0x7, > + .shift = 9, > + .flags = CLK_MUX_ROUND_CLOSEST, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "hevcf_p1_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_dec_parent_data, > + .num_parents = ARRAY_SIZE(s4_dec_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_hevcf_p1_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_VDEC4_CLK_CTRL, > + .shift = 0, > + .width = 7, > + .flags = CLK_DIVIDER_ROUND_CLOSEST, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "hevcf_p1_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_hevcf_p1_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_hevcf_p1 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VDEC4_CLK_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "hevcf_p1", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_hevcf_p1_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static const struct clk_hw *s4_hevcf_mux_parent_hws[] = { > + &s4_hevcf_p0.hw, > + &s4_hevcf_p1.hw > +}; > + > +static struct clk_regmap s4_hevcf_mux = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VDEC4_CLK_CTRL, > + .mask = 0x1, > + .shift = 15, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "hevcf", > + .ops = &clk_regmap_mux_ops, > + .parent_hws = s4_hevcf_mux_parent_hws, > + .num_parents = ARRAY_SIZE(s4_hevcf_mux_parent_hws), > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +/* VPU Clock */ > +static const struct clk_parent_data s4_vpu_parent_data[] = { > + { .fw_name = "fclk_div3", }, > + { .fw_name = "fclk_div4", }, > + { .fw_name = "fclk_div5", }, > + { .fw_name = "fclk_div7", }, > + { .fw_name = "mpll1", }, > + { .hw = &s4_vid_pll.hw }, > + { .fw_name = "hifi_pll", }, > + { .fw_name = "gp0_pll", }, > +}; > + > +static struct clk_regmap s4_vpu_0_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VPU_CLK_CTRL, > + .mask = 0x7, > + .shift = 9, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vpu_0_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_vpu_parent_data, > + .num_parents = ARRAY_SIZE(s4_vpu_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_vpu_0_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_VPU_CLK_CTRL, > + .shift = 0, > + .width = 7, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vpu_0_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vpu_0_sel.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vpu_0 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VPU_CLK_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vpu_0", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vpu_0_div.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vpu_1_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VPU_CLK_CTRL, > + .mask = 0x7, > + .shift = 25, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vpu_1_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_vpu_parent_data, > + .num_parents = ARRAY_SIZE(s4_vpu_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_vpu_1_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_VPU_CLK_CTRL, > + .shift = 16, > + .width = 7, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vpu_1_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vpu_1_sel.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vpu_1 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VPU_CLK_CTRL, > + .bit_idx = 24, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vpu_1", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vpu_1_div.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vpu = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VPU_CLK_CTRL, > + .mask = 1, > + .shift = 31, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vpu", > + .ops = &clk_regmap_mux_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vpu_0.hw, > + &s4_vpu_1.hw, > + }, > + .num_parents = 2, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static const struct clk_parent_data vpu_clkb_tmp_parent_data[] = { > + { .hw = &s4_vpu.hw }, > + { .fw_name = "fclk_div4", }, > + { .fw_name = "fclk_div5", }, > + { .fw_name = "fclk_div7", } > +}; > + > +static struct clk_regmap s4_vpu_clkb_tmp_mux = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VPU_CLKB_CTRL, > + .mask = 0x3, > + .shift = 20, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vpu_clkb_tmp_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = vpu_clkb_tmp_parent_data, > + .num_parents = ARRAY_SIZE(vpu_clkb_tmp_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_vpu_clkb_tmp_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_VPU_CLKB_CTRL, > + .shift = 16, > + .width = 4, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vpu_clkb_tmp_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vpu_clkb_tmp_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vpu_clkb_tmp = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VPU_CLKB_CTRL, > + .bit_idx = 24, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vpu_clkb_tmp", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vpu_clkb_tmp_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vpu_clkb_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_VPU_CLKB_CTRL, > + .shift = 0, > + .width = 8, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vpu_clkb_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vpu_clkb_tmp.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vpu_clkb = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VPU_CLKB_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vpu_clkb", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vpu_clkb_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static const struct clk_parent_data s4_vpu_clkc_parent_data[] = { > + { .fw_name = "fclk_div4", }, > + { .fw_name = "fclk_div3", }, > + { .fw_name = "fclk_div5", }, > + { .fw_name = "fclk_div7", }, > + { .fw_name = "mpll1", }, > + { .hw = &s4_vid_pll.hw }, > + { .fw_name = "mpll2", }, > + { .fw_name = "gp0_pll", }, > +}; > + > +static struct clk_regmap s4_vpu_clkc_p0_mux = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VPU_CLKC_CTRL, > + .mask = 0x7, > + .shift = 9, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vpu_clkc_p0_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_vpu_clkc_parent_data, > + .num_parents = ARRAY_SIZE(s4_vpu_clkc_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_vpu_clkc_p0_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_VPU_CLKC_CTRL, > + .shift = 0, > + .width = 7, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vpu_clkc_p0_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vpu_clkc_p0_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vpu_clkc_p0 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VPU_CLKC_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vpu_clkc_p0", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vpu_clkc_p0_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vpu_clkc_p1_mux = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VPU_CLKC_CTRL, > + .mask = 0x7, > + .shift = 25, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vpu_clkc_p1_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_vpu_clkc_parent_data, > + .num_parents = ARRAY_SIZE(s4_vpu_clkc_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_vpu_clkc_p1_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_VPU_CLKC_CTRL, > + .shift = 16, > + .width = 7, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vpu_clkc_p1_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vpu_clkc_p1_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vpu_clkc_p1 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VPU_CLKC_CTRL, > + .bit_idx = 24, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vpu_clkc_p1", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vpu_clkc_p1_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static const struct clk_hw *s4_vpu_mux_parent_hws[] = { > + &s4_vpu_clkc_p0.hw, > + &s4_vpu_clkc_p1.hw > +}; > + > +static struct clk_regmap s4_vpu_clkc_mux = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VPU_CLKC_CTRL, > + .mask = 0x1, > + .shift = 31, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vpu_clkc_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_hws = s4_vpu_mux_parent_hws, > + .num_parents = ARRAY_SIZE(s4_vpu_mux_parent_hws), > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +/* VAPB Clock */ > +static const struct clk_parent_data s4_vapb_parent_data[] = { > + { .fw_name = "fclk_div4", }, > + { .fw_name = "fclk_div3", }, > + { .fw_name = "fclk_div5", }, > + { .fw_name = "fclk_div7", }, > + { .fw_name = "mpll1", }, > + { .hw = &s4_vid_pll.hw }, > + { .fw_name = "mpll2", }, > + { .fw_name = "fclk_div2p5", }, > +}; > + > +static struct clk_regmap s4_vapb_0_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VAPBCLK_CTRL, > + .mask = 0x7, > + .shift = 9, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vapb_0_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_vapb_parent_data, > + .num_parents = ARRAY_SIZE(s4_vapb_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_vapb_0_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_VAPBCLK_CTRL, > + .shift = 0, > + .width = 7, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vapb_0_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vapb_0_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vapb_0 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VAPBCLK_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vapb_0", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vapb_0_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vapb_1_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VAPBCLK_CTRL, > + .mask = 0x7, > + .shift = 25, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vapb_1_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_vapb_parent_data, > + .num_parents = ARRAY_SIZE(s4_vapb_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_vapb_1_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_VAPBCLK_CTRL, > + .shift = 16, > + .width = 7, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vapb_1_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vapb_1_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vapb_1 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VAPBCLK_CTRL, > + .bit_idx = 24, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vapb_1", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vapb_1_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vapb = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VAPBCLK_CTRL, > + .mask = 1, > + .shift = 31, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vapb_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vapb_0.hw, > + &s4_vapb_1.hw > + }, > + .num_parents = 2, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_ge2d_gate = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VAPBCLK_CTRL, > + .bit_idx = 30, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "ge2d_clk", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { &s4_vapb.hw }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static const struct clk_parent_data s4_esmclk_parent_data[] = { > + { .fw_name = "fclk_div7", }, > + { .fw_name = "fclk_div4", }, > + { .fw_name = "fclk_div3", }, > + { .fw_name = "fclk_div5", }, > +}; > + > +static struct clk_regmap s4_hdcp22_esmclk_mux = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_HDCP22_CTRL, > + .mask = 0x3, > + .shift = 9, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "hdcp22_esmclk_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_esmclk_parent_data, > + .num_parents = ARRAY_SIZE(s4_esmclk_parent_data), > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_hdcp22_esmclk_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_HDCP22_CTRL, > + .shift = 0, > + .width = 7, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "hdcp22_esmclk_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_hdcp22_esmclk_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_hdcp22_esmclk_gate = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_HDCP22_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "hdcp22_esmclk_gate", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_hdcp22_esmclk_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static const struct clk_parent_data s4_skpclk_parent_data[] = { > + { .fw_name = "xtal", }, > + { .fw_name = "fclk_div4", }, > + { .fw_name = "fclk_div3", }, > + { .fw_name = "fclk_div5", }, > +}; > + > +static struct clk_regmap s4_hdcp22_skpclk_mux = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_HDCP22_CTRL, > + .mask = 0x3, > + .shift = 25, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "hdcp22_skpclk_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_skpclk_parent_data, > + .num_parents = ARRAY_SIZE(s4_skpclk_parent_data), > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_hdcp22_skpclk_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_HDCP22_CTRL, > + .shift = 16, > + .width = 7, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "hdcp22_skpclk_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_hdcp22_skpclk_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_hdcp22_skpclk_gate = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_HDCP22_CTRL, > + .bit_idx = 24, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "hdcp22_skpclk_gate", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_hdcp22_skpclk_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static const struct clk_parent_data s4_vdin_parent_data[] = { > + { .fw_name = "xtal", }, > + { .fw_name = "fclk_div4", }, > + { .fw_name = "fclk_div3", }, > + { .fw_name = "fclk_div5", }, > + { .hw = &s4_vid_pll.hw } > +}; > + > +static struct clk_regmap s4_vdin_meas_mux = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_VDIN_MEAS_CLK_CTRL, > + .mask = 0x7, > + .shift = 9, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vdin_meas_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_vdin_parent_data, > + .num_parents = ARRAY_SIZE(s4_vdin_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_vdin_meas_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_VDIN_MEAS_CLK_CTRL, > + .shift = 0, > + .width = 7, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "vdin_meas_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vdin_meas_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_vdin_meas_gate = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_VDIN_MEAS_CLK_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "vdin_meas_gate", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_vdin_meas_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +/* EMMC/NAND clock */ > +static const struct clk_parent_data s4_sd_emmc_clk0_parent_data[] = { > + { .fw_name = "xtal", }, > + { .fw_name = "fclk_div2", }, > + { .fw_name = "fclk_div3", }, > + { .fw_name = "hifi_pll", }, > + { .fw_name = "fclk_div2p5", }, > + { .fw_name = "mpll2", }, > + { .fw_name = "mpll3", }, > + { .fw_name = "gp0_pll", }, > +}; > + > +static struct clk_regmap s4_sd_emmc_c_clk0_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_NAND_CLK_CTRL, > + .mask = 0x7, > + .shift = 9, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "sd_emmc_c_clk0_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_sd_emmc_clk0_parent_data, > + .num_parents = ARRAY_SIZE(s4_sd_emmc_clk0_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_sd_emmc_c_clk0_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_NAND_CLK_CTRL, > + .shift = 0, > + .width = 7, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "sd_emmc_c_clk0_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_sd_emmc_c_clk0_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_sd_emmc_c_clk0 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_NAND_CLK_CTRL, > + .bit_idx = 7, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "sd_emmc_c_clk0", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_sd_emmc_c_clk0_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_sd_emmc_a_clk0_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, > + .mask = 0x7, > + .shift = 9, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "sd_emmc_a_clk0_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_sd_emmc_clk0_parent_data, > + .num_parents = ARRAY_SIZE(s4_sd_emmc_clk0_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_sd_emmc_a_clk0_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, > + .shift = 0, > + .width = 7, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "sd_emmc_a_clk0_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_sd_emmc_a_clk0_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_sd_emmc_a_clk0 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, > + .bit_idx = 7, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "sd_emmc_a_clk0", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_sd_emmc_a_clk0_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_sd_emmc_b_clk0_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, > + .mask = 0x7, > + .shift = 25, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "sd_emmc_b_clk0_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_sd_emmc_clk0_parent_data, > + .num_parents = ARRAY_SIZE(s4_sd_emmc_clk0_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_sd_emmc_b_clk0_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, > + .shift = 16, > + .width = 7, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "sd_emmc_b_clk0_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_sd_emmc_b_clk0_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_sd_emmc_b_clk0 = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, > + .bit_idx = 23, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "sd_emmc_b_clk0", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_sd_emmc_b_clk0_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +/* SPICC Clock */ > +static const struct clk_parent_data s4_spicc_parent_data[] = { > + { .fw_name = "xtal", }, > + { .hw = &s4_sys_clk.hw }, > + { .fw_name = "fclk_div4", }, > + { .fw_name = "fclk_div3", }, > + { .fw_name = "fclk_div2", }, > + { .fw_name = "fclk_div5", }, > + { .fw_name = "fclk_div7", }, > +}; > + > +static struct clk_regmap s4_spicc0_mux = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_SPICC_CLK_CTRL, > + .mask = 0x7, > + .shift = 7, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "spicc0_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_spicc_parent_data, > + .num_parents = ARRAY_SIZE(s4_spicc_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_spicc0_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_SPICC_CLK_CTRL, > + .shift = 0, > + .width = 6, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "spicc0_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_spicc0_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_spicc0_gate = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_SPICC_CLK_CTRL, > + .bit_idx = 6, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "spicc0", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_spicc0_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +/* PWM Clock */ > +static const struct clk_parent_data s4_pwm_parent_data[] = { > + { .fw_name = "xtal", }, > + { .hw = &s4_vid_pll.hw }, > + { .fw_name = "fclk_div4", }, > + { .fw_name = "fclk_div3", }, > +}; > + > +static struct clk_regmap s4_pwm_a_mux = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_PWM_CLK_AB_CTRL, > + .mask = 0x3, > + .shift = 9, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_a_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_pwm_parent_data, > + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_pwm_a_div = { > + .data = &(struct clk_regmap_div_data) { > + .offset = CLKCTRL_PWM_CLK_AB_CTRL, > + .shift = 0, > + .width = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_a_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_a_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_a_gate = { > + .data = &(struct clk_regmap_gate_data) { > + .offset = CLKCTRL_PWM_CLK_AB_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_a_gate", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_a_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_b_mux = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_PWM_CLK_AB_CTRL, > + .mask = 0x3, > + .shift = 25, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_b_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_pwm_parent_data, > + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_pwm_b_div = { > + .data = &(struct clk_regmap_div_data) { > + .offset = CLKCTRL_PWM_CLK_AB_CTRL, > + .shift = 16, > + .width = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_b_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_b_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_b_gate = { > + .data = &(struct clk_regmap_gate_data) { > + .offset = CLKCTRL_PWM_CLK_AB_CTRL, > + .bit_idx = 24, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_b_gate", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_b_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_c_mux = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_PWM_CLK_CD_CTRL, > + .mask = 0x3, > + .shift = 9, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_c_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_pwm_parent_data, > + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_pwm_c_div = { > + .data = &(struct clk_regmap_div_data) { > + .offset = CLKCTRL_PWM_CLK_CD_CTRL, > + .shift = 0, > + .width = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_c_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_c_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_c_gate = { > + .data = &(struct clk_regmap_gate_data) { > + .offset = CLKCTRL_PWM_CLK_CD_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_c_gate", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_c_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_d_mux = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_PWM_CLK_CD_CTRL, > + .mask = 0x3, > + .shift = 25, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_d_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_pwm_parent_data, > + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_pwm_d_div = { > + .data = &(struct clk_regmap_div_data) { > + .offset = CLKCTRL_PWM_CLK_CD_CTRL, > + .shift = 16, > + .width = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_d_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_d_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_d_gate = { > + .data = &(struct clk_regmap_gate_data) { > + .offset = CLKCTRL_PWM_CLK_CD_CTRL, > + .bit_idx = 24, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_d_gate", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_d_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_e_mux = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_PWM_CLK_EF_CTRL, > + .mask = 0x3, > + .shift = 9, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_e_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_pwm_parent_data, > + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_pwm_e_div = { > + .data = &(struct clk_regmap_div_data) { > + .offset = CLKCTRL_PWM_CLK_EF_CTRL, > + .shift = 0, > + .width = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_e_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_e_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_e_gate = { > + .data = &(struct clk_regmap_gate_data) { > + .offset = CLKCTRL_PWM_CLK_EF_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_e_gate", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_e_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_f_mux = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_PWM_CLK_EF_CTRL, > + .mask = 0x3, > + .shift = 25, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_f_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_pwm_parent_data, > + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_pwm_f_div = { > + .data = &(struct clk_regmap_div_data) { > + .offset = CLKCTRL_PWM_CLK_EF_CTRL, > + .shift = 16, > + .width = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_f_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_f_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_f_gate = { > + .data = &(struct clk_regmap_gate_data) { > + .offset = CLKCTRL_PWM_CLK_EF_CTRL, > + .bit_idx = 24, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_f_gate", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_f_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_g_mux = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_PWM_CLK_GH_CTRL, > + .mask = 0x3, > + .shift = 9, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_g_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_pwm_parent_data, > + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_pwm_g_div = { > + .data = &(struct clk_regmap_div_data) { > + .offset = CLKCTRL_PWM_CLK_GH_CTRL, > + .shift = 0, > + .width = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_g_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_g_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_g_gate = { > + .data = &(struct clk_regmap_gate_data) { > + .offset = CLKCTRL_PWM_CLK_GH_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_g_gate", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_g_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_h_mux = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_PWM_CLK_GH_CTRL, > + .mask = 0x3, > + .shift = 25, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_h_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_pwm_parent_data, > + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_pwm_h_div = { > + .data = &(struct clk_regmap_div_data) { > + .offset = CLKCTRL_PWM_CLK_GH_CTRL, > + .shift = 16, > + .width = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_h_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_h_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_h_gate = { > + .data = &(struct clk_regmap_gate_data) { > + .offset = CLKCTRL_PWM_CLK_GH_CTRL, > + .bit_idx = 24, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_h_gate", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_h_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_i_mux = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, > + .mask = 0x3, > + .shift = 9, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_i_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_pwm_parent_data, > + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_pwm_i_div = { > + .data = &(struct clk_regmap_div_data) { > + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, > + .shift = 0, > + .width = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_i_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_i_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_i_gate = { > + .data = &(struct clk_regmap_gate_data) { > + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_i_gate", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_i_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_j_mux = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, > + .mask = 0x3, > + .shift = 25, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_j_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_pwm_parent_data, > + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_pwm_j_div = { > + .data = &(struct clk_regmap_div_data) { > + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, > + .shift = 16, > + .width = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_j_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_h_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_pwm_j_gate = { > + .data = &(struct clk_regmap_gate_data) { > + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, > + .bit_idx = 24, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "pwm_j_gate", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_pwm_j_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_saradc_mux = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_SAR_CLK_CTRL, > + .mask = 0x3, > + .shift = 9, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "saradc_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = (const struct clk_parent_data []) { > + { .fw_name = "xtal", }, > + { .hw = &s4_sys_clk.hw }, > + }, > + .num_parents = 2, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_saradc_div = { > + .data = &(struct clk_regmap_div_data) { > + .offset = CLKCTRL_SAR_CLK_CTRL, > + .shift = 0, > + .width = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "saradc_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_saradc_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_saradc_gate = { > + .data = &(struct clk_regmap_gate_data) { > + .offset = CLKCTRL_SAR_CLK_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "saradc_clk", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_saradc_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +/* > + * gen clk is designed for debug/monitor some internal clock quality. Some of the > + * corresponding clock sources are not described in the clock tree and internal clock > + * for debug, so they are skipped. > + */ > +static u32 s4_gen_clk_mux_table[] = { 0, 4, 5, 7, 19, 21, 22, > + 23, 24, 25, 26, 27, 28 }; > +static const struct clk_parent_data s4_gen_clk_parent_data[] = { > + { .fw_name = "xtal", }, > + { .hw = &s4_vid_pll.hw }, > + { .fw_name = "gp0_pll", }, > + { .fw_name = "hifi_pll", }, > + { .fw_name = "fclk_div2", }, > + { .fw_name = "fclk_div3", }, > + { .fw_name = "fclk_div4", }, > + { .fw_name = "fclk_div5", }, > + { .fw_name = "fclk_div7", }, > + { .fw_name = "mpll0", }, > + { .fw_name = "mpll1", }, > + { .fw_name = "mpll2", }, > + { .fw_name = "mpll3", }, > +}; > + > +static struct clk_regmap s4_gen_clk_sel = { > + .data = &(struct clk_regmap_mux_data){ > + .offset = CLKCTRL_GEN_CLK_CTRL, > + .mask = 0x1f, > + .shift = 12, > + .table = s4_gen_clk_mux_table, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "gen_clk_sel", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_gen_clk_parent_data, > + .num_parents = ARRAY_SIZE(s4_gen_clk_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_gen_clk_div = { > + .data = &(struct clk_regmap_div_data){ > + .offset = CLKCTRL_GEN_CLK_CTRL, > + .shift = 0, > + .width = 11, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "gen_clk_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_gen_clk_sel.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_gen_clk = { > + .data = &(struct clk_regmap_gate_data){ > + .offset = CLKCTRL_GEN_CLK_CTRL, > + .bit_idx = 11, > + }, > + .hw.init = &(struct clk_init_data) { > + .name = "gen_clk", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_gen_clk_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE, > + }, > +}; > + > +static const struct clk_parent_data s4_adc_extclk_in_parent_data[] = { > + { .fw_name = "xtal", }, > + { .fw_name = "fclk_div4", }, > + { .fw_name = "fclk_div3", }, > + { .fw_name = "fclk_div5", }, > + { .fw_name = "fclk_div7", }, > + { .fw_name = "mpll2", }, > + { .fw_name = "gp0_pll", }, > + { .fw_name = "hifi_pll", }, > +}; > + > +static struct clk_regmap s4_adc_extclk_in_mux = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_DEMOD_CLK_CTRL, > + .mask = 0x7, > + .shift = 25, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "adc_extclk_in_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = s4_adc_extclk_in_parent_data, > + .num_parents = ARRAY_SIZE(s4_adc_extclk_in_parent_data), > + }, > +}; > + > +static struct clk_regmap s4_adc_extclk_in_div = { > + .data = &(struct clk_regmap_div_data) { > + .offset = CLKCTRL_DEMOD_CLK_CTRL, > + .shift = 16, > + .width = 7, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "adc_extclk_in_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_adc_extclk_in_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_adc_extclk_in_gate = { > + .data = &(struct clk_regmap_gate_data) { > + .offset = CLKCTRL_DEMOD_CLK_CTRL, > + .bit_idx = 24, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "adc_extclk_in", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_adc_extclk_in_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_demod_core_clk_mux = { > + .data = &(struct clk_regmap_mux_data) { > + .offset = CLKCTRL_DEMOD_CLK_CTRL, > + .mask = 0x3, > + .shift = 9, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "demod_core_clk_mux", > + .ops = &clk_regmap_mux_ops, > + .parent_data = (const struct clk_parent_data []) { > + { .fw_name = "xtal", }, > + { .fw_name = "fclk_div7", }, > + { .fw_name = "fclk_div4", }, > + { .hw = &s4_adc_extclk_in_gate.hw } > + }, > + .num_parents = 4, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_demod_core_clk_div = { > + .data = &(struct clk_regmap_div_data) { > + .offset = CLKCTRL_DEMOD_CLK_CTRL, > + .shift = 0, > + .width = 7, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "demod_core_clk_div", > + .ops = &clk_regmap_divider_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_demod_core_clk_mux.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +static struct clk_regmap s4_demod_core_clk_gate = { > + .data = &(struct clk_regmap_gate_data) { > + .offset = CLKCTRL_DEMOD_CLK_CTRL, > + .bit_idx = 8, > + }, > + .hw.init = &(struct clk_init_data){ > + .name = "demod_core_clk", > + .ops = &clk_regmap_gate_ops, > + .parent_hws = (const struct clk_hw *[]) { > + &s4_demod_core_clk_div.hw > + }, > + .num_parents = 1, > + .flags = CLK_SET_RATE_PARENT, > + }, > +}; > + > +#define MESON_GATE(_name, _reg, _bit) \ > + MESON_PCLK(_name, _reg, _bit, &s4_sys_clk.hw) > + > +static MESON_GATE(s4_ddr, CLKCTRL_SYS_CLK_EN0_REG0, 0); > +static MESON_GATE(s4_dos, CLKCTRL_SYS_CLK_EN0_REG0, 1); > +static MESON_GATE(s4_ethphy, CLKCTRL_SYS_CLK_EN0_REG0, 4); > +static MESON_GATE(s4_mali, CLKCTRL_SYS_CLK_EN0_REG0, 6); > +static MESON_GATE(s4_aocpu, CLKCTRL_SYS_CLK_EN0_REG0, 13); > +static MESON_GATE(s4_aucpu, CLKCTRL_SYS_CLK_EN0_REG0, 14); > +static MESON_GATE(s4_cec, CLKCTRL_SYS_CLK_EN0_REG0, 16); > +static MESON_GATE(s4_sdemmca, CLKCTRL_SYS_CLK_EN0_REG0, 24); > +static MESON_GATE(s4_sdemmcb, CLKCTRL_SYS_CLK_EN0_REG0, 25); > +static MESON_GATE(s4_nand, CLKCTRL_SYS_CLK_EN0_REG0, 26); > +static MESON_GATE(s4_smartcard, CLKCTRL_SYS_CLK_EN0_REG0, 27); > +static MESON_GATE(s4_acodec, CLKCTRL_SYS_CLK_EN0_REG0, 28); > +static MESON_GATE(s4_spifc, CLKCTRL_SYS_CLK_EN0_REG0, 29); > +static MESON_GATE(s4_msr_clk, CLKCTRL_SYS_CLK_EN0_REG0, 30); > +static MESON_GATE(s4_ir_ctrl, CLKCTRL_SYS_CLK_EN0_REG0, 31); > +static MESON_GATE(s4_audio, CLKCTRL_SYS_CLK_EN0_REG1, 0); > +static MESON_GATE(s4_eth, CLKCTRL_SYS_CLK_EN0_REG1, 3); > +static MESON_GATE(s4_uart_a, CLKCTRL_SYS_CLK_EN0_REG1, 5); > +static MESON_GATE(s4_uart_b, CLKCTRL_SYS_CLK_EN0_REG1, 6); > +static MESON_GATE(s4_uart_c, CLKCTRL_SYS_CLK_EN0_REG1, 7); > +static MESON_GATE(s4_uart_d, CLKCTRL_SYS_CLK_EN0_REG1, 8); > +static MESON_GATE(s4_uart_e, CLKCTRL_SYS_CLK_EN0_REG1, 9); > +static MESON_GATE(s4_aififo, CLKCTRL_SYS_CLK_EN0_REG1, 11); > +static MESON_GATE(s4_ts_ddr, CLKCTRL_SYS_CLK_EN0_REG1, 15); > +static MESON_GATE(s4_ts_pll, CLKCTRL_SYS_CLK_EN0_REG1, 16); > +static MESON_GATE(s4_g2d, CLKCTRL_SYS_CLK_EN0_REG1, 20); > +static MESON_GATE(s4_spicc0, CLKCTRL_SYS_CLK_EN0_REG1, 21); > +static MESON_GATE(s4_usb, CLKCTRL_SYS_CLK_EN0_REG1, 26); > +static MESON_GATE(s4_i2c_m_a, CLKCTRL_SYS_CLK_EN0_REG1, 30); > +static MESON_GATE(s4_i2c_m_b, CLKCTRL_SYS_CLK_EN0_REG1, 31); > +static MESON_GATE(s4_i2c_m_c, CLKCTRL_SYS_CLK_EN0_REG2, 0); > +static MESON_GATE(s4_i2c_m_d, CLKCTRL_SYS_CLK_EN0_REG2, 1); > +static MESON_GATE(s4_i2c_m_e, CLKCTRL_SYS_CLK_EN0_REG2, 2); > +static MESON_GATE(s4_hdmitx_apb, CLKCTRL_SYS_CLK_EN0_REG2, 4); > +static MESON_GATE(s4_i2c_s_a, CLKCTRL_SYS_CLK_EN0_REG2, 5); > +static MESON_GATE(s4_usb1_to_ddr, CLKCTRL_SYS_CLK_EN0_REG2, 8); > +static MESON_GATE(s4_hdcp22, CLKCTRL_SYS_CLK_EN0_REG2, 10); > +static MESON_GATE(s4_mmc_apb, CLKCTRL_SYS_CLK_EN0_REG2, 11); > +static MESON_GATE(s4_rsa, CLKCTRL_SYS_CLK_EN0_REG2, 18); > +static MESON_GATE(s4_cpu_debug, CLKCTRL_SYS_CLK_EN0_REG2, 19); > +static MESON_GATE(s4_vpu_intr, CLKCTRL_SYS_CLK_EN0_REG2, 25); > +static MESON_GATE(s4_demod, CLKCTRL_SYS_CLK_EN0_REG2, 27); > +static MESON_GATE(s4_sar_adc, CLKCTRL_SYS_CLK_EN0_REG2, 28); > +static MESON_GATE(s4_gic, CLKCTRL_SYS_CLK_EN0_REG2, 30); > +static MESON_GATE(s4_pwm_ab, CLKCTRL_SYS_CLK_EN0_REG3, 7); > +static MESON_GATE(s4_pwm_cd, CLKCTRL_SYS_CLK_EN0_REG3, 8); > +static MESON_GATE(s4_pwm_ef, CLKCTRL_SYS_CLK_EN0_REG3, 9); > +static MESON_GATE(s4_pwm_gh, CLKCTRL_SYS_CLK_EN0_REG3, 10); > +static MESON_GATE(s4_pwm_ij, CLKCTRL_SYS_CLK_EN0_REG3, 11); > + > +/* Array of all clocks provided by this provider */ > +static struct clk_hw_onecell_data s4_periphs_hw_onecell_data = { > + .hws = { > + [CLKID_RTC_32K_CLKIN] = &s4_rtc_32k_by_oscin_clkin.hw, > + [CLKID_RTC_32K_DIV] = &s4_rtc_32k_by_oscin_div.hw, > + [CLKID_RTC_32K_SEL] = &s4_rtc_32k_by_oscin_sel.hw, > + [CLKID_RTC_32K_XATL] = &s4_rtc_32k_by_oscin.hw, > + [CLKID_RTC_CLK] = &s4_rtc_clk.hw, > + [CLKID_SYS_CLK_B_SEL] = &s4_sysclk_b_sel.hw, > + [CLKID_SYS_CLK_B_DIV] = &s4_sysclk_b_div.hw, > + [CLKID_SYS_CLK_B_GATE] = &s4_sysclk_b.hw, > + [CLKID_SYS_CLK_A_SEL] = &s4_sysclk_a_sel.hw, > + [CLKID_SYS_CLK_A_DIV] = &s4_sysclk_a_div.hw, > + [CLKID_SYS_CLK_A_GATE] = &s4_sysclk_a.hw, > + [CLKID_SYS_CLK] = &s4_sys_clk.hw, > + [CLKID_CECA_32K_CLKIN] = &s4_ceca_32k_clkin.hw, > + [CLKID_CECA_32K_DIV] = &s4_ceca_32k_div.hw, > + [CLKID_CECA_32K_SEL_PRE] = &s4_ceca_32k_sel_pre.hw, > + [CLKID_CECA_32K_SEL] = &s4_ceca_32k_sel.hw, > + [CLKID_CECA_32K_CLKOUT] = &s4_ceca_32k_clkout.hw, > + [CLKID_CECB_32K_CLKIN] = &s4_cecb_32k_clkin.hw, > + [CLKID_CECB_32K_DIV] = &s4_cecb_32k_div.hw, > + [CLKID_CECB_32K_SEL_PRE] = &s4_cecb_32k_sel_pre.hw, > + [CLKID_CECB_32K_SEL] = &s4_cecb_32k_sel.hw, > + [CLKID_CECB_32K_CLKOUT] = &s4_cecb_32k_clkout.hw, > + [CLKID_SC_CLK_SEL] = &s4_sc_clk_mux.hw, > + [CLKID_SC_CLK_DIV] = &s4_sc_clk_div.hw, > + [CLKID_SC_CLK_GATE] = &s4_sc_clk_gate.hw, > + [CLKID_12_24M_CLK_GATE] = &s4_12_24M_clk_gate.hw, > + [CLKID_12M_CLK_DIV] = &s4_12M_clk_div.hw, > + [CLKID_12_24M_CLK_SEL] = &s4_12_24M_clk.hw, > + [CLKID_VID_PLL_DIV] = &s4_vid_pll_div.hw, > + [CLKID_VID_PLL_SEL] = &s4_vid_pll_sel.hw, > + [CLKID_VID_PLL] = &s4_vid_pll.hw, > + [CLKID_VCLK_SEL] = &s4_vclk_sel.hw, > + [CLKID_VCLK2_SEL] = &s4_vclk2_sel.hw, > + [CLKID_VCLK_INPUT] = &s4_vclk_input.hw, > + [CLKID_VCLK2_INPUT] = &s4_vclk2_input.hw, > + [CLKID_VCLK_DIV] = &s4_vclk_div.hw, > + [CLKID_VCLK2_DIV] = &s4_vclk2_div.hw, > + [CLKID_VCLK] = &s4_vclk.hw, > + [CLKID_VCLK2] = &s4_vclk2.hw, > + [CLKID_VCLK_DIV1] = &s4_vclk_div1.hw, > + [CLKID_VCLK_DIV2_EN] = &s4_vclk_div2_en.hw, > + [CLKID_VCLK_DIV4_EN] = &s4_vclk_div4_en.hw, > + [CLKID_VCLK_DIV6_EN] = &s4_vclk_div6_en.hw, > + [CLKID_VCLK_DIV12_EN] = &s4_vclk_div12_en.hw, > + [CLKID_VCLK2_DIV1] = &s4_vclk2_div1.hw, > + [CLKID_VCLK2_DIV2_EN] = &s4_vclk2_div2_en.hw, > + [CLKID_VCLK2_DIV4_EN] = &s4_vclk2_div4_en.hw, > + [CLKID_VCLK2_DIV6_EN] = &s4_vclk2_div6_en.hw, > + [CLKID_VCLK2_DIV12_EN] = &s4_vclk2_div12_en.hw, > + [CLKID_VCLK_DIV2] = &s4_vclk_div2.hw, > + [CLKID_VCLK_DIV4] = &s4_vclk_div4.hw, > + [CLKID_VCLK_DIV6] = &s4_vclk_div6.hw, > + [CLKID_VCLK_DIV12] = &s4_vclk_div12.hw, > + [CLKID_VCLK2_DIV2] = &s4_vclk2_div2.hw, > + [CLKID_VCLK2_DIV4] = &s4_vclk2_div4.hw, > + [CLKID_VCLK2_DIV6] = &s4_vclk2_div6.hw, > + [CLKID_VCLK2_DIV12] = &s4_vclk2_div12.hw, > + [CLKID_CTS_ENCI_SEL] = &s4_cts_enci_sel.hw, > + [CLKID_CTS_ENCP_SEL] = &s4_cts_encp_sel.hw, > + [CLKID_CTS_VDAC_SEL] = &s4_cts_vdac_sel.hw, > + [CLKID_HDMI_TX_SEL] = &s4_hdmi_tx_sel.hw, > + [CLKID_CTS_ENCI] = &s4_cts_enci.hw, > + [CLKID_CTS_ENCP] = &s4_cts_encp.hw, > + [CLKID_CTS_VDAC] = &s4_cts_vdac.hw, > + [CLKID_HDMI_TX] = &s4_hdmi_tx.hw, > + [CLKID_HDMI_SEL] = &s4_hdmi_sel.hw, > + [CLKID_HDMI_DIV] = &s4_hdmi_div.hw, > + [CLKID_HDMI] = &s4_hdmi.hw, > + [CLKID_TS_CLK_DIV] = &s4_ts_clk_div.hw, > + [CLKID_TS_CLK_GATE] = &s4_ts_clk_gate.hw, > + [CLKID_MALI_0_SEL] = &s4_mali_0_sel.hw, > + [CLKID_MALI_0_DIV] = &s4_mali_0_div.hw, > + [CLKID_MALI_0] = &s4_mali_0.hw, > + [CLKID_MALI_1_SEL] = &s4_mali_1_sel.hw, > + [CLKID_MALI_1_DIV] = &s4_mali_1_div.hw, > + [CLKID_MALI_1] = &s4_mali_1.hw, > + [CLKID_MALI] = &s4_mali_mux.hw, > + [CLKID_VDEC_P0_SEL] = &s4_vdec_p0_mux.hw, > + [CLKID_VDEC_P0_DIV] = &s4_vdec_p0_div.hw, > + [CLKID_VDEC_P0] = &s4_vdec_p0.hw, > + [CLKID_VDEC_P1_SEL] = &s4_vdec_p1_mux.hw, > + [CLKID_VDEC_P1_DIV] = &s4_vdec_p1_div.hw, > + [CLKID_VDEC_P1] = &s4_vdec_p1.hw, > + [CLKID_VDEC_SEL] = &s4_vdec_mux.hw, > + [CLKID_HEVCF_P0_SEL] = &s4_hevcf_p0_mux.hw, > + [CLKID_HEVCF_P0_DIV] = &s4_hevcf_p0_div.hw, > + [CLKID_HEVCF_P0] = &s4_hevcf_p0.hw, > + [CLKID_HEVCF_P1_SEL] = &s4_hevcf_p1_mux.hw, > + [CLKID_HEVCF_P1_DIV] = &s4_hevcf_p1_div.hw, > + [CLKID_HEVCF_P1] = &s4_hevcf_p1.hw, > + [CLKID_HEVCF_SEL] = &s4_hevcf_mux.hw, > + [CLKID_VPU_0_SEL] = &s4_vpu_0_sel.hw, > + [CLKID_VPU_0_DIV] = &s4_vpu_0_div.hw, > + [CLKID_VPU_0] = &s4_vpu_0.hw, > + [CLKID_VPU_1_SEL] = &s4_vpu_1_sel.hw, > + [CLKID_VPU_1_DIV] = &s4_vpu_1_div.hw, > + [CLKID_VPU_1] = &s4_vpu_1.hw, > + [CLKID_VPU] = &s4_vpu.hw, > + [CLKID_VPU_CLKB_TMP_SEL] = &s4_vpu_clkb_tmp_mux.hw, > + [CLKID_VPU_CLKB_TMP_DIV] = &s4_vpu_clkb_tmp_div.hw, > + [CLKID_VPU_CLKB_TMP] = &s4_vpu_clkb_tmp.hw, > + [CLKID_VPU_CLKB_DIV] = &s4_vpu_clkb_div.hw, > + [CLKID_VPU_CLKB] = &s4_vpu_clkb.hw, > + [CLKID_VPU_CLKC_P0_SEL] = &s4_vpu_clkc_p0_mux.hw, > + [CLKID_VPU_CLKC_P0_DIV] = &s4_vpu_clkc_p0_div.hw, > + [CLKID_VPU_CLKC_P0] = &s4_vpu_clkc_p0.hw, > + [CLKID_VPU_CLKC_P1_SEL] = &s4_vpu_clkc_p1_mux.hw, > + [CLKID_VPU_CLKC_P1_DIV] = &s4_vpu_clkc_p1_div.hw, > + [CLKID_VPU_CLKC_P1] = &s4_vpu_clkc_p1.hw, > + [CLKID_VPU_CLKC_SEL] = &s4_vpu_clkc_mux.hw, > + [CLKID_VAPB_0_SEL] = &s4_vapb_0_sel.hw, > + [CLKID_VAPB_0_DIV] = &s4_vapb_0_div.hw, > + [CLKID_VAPB_0] = &s4_vapb_0.hw, > + [CLKID_VAPB_1_SEL] = &s4_vapb_1_sel.hw, > + [CLKID_VAPB_1_DIV] = &s4_vapb_1_div.hw, > + [CLKID_VAPB_1] = &s4_vapb_1.hw, > + [CLKID_VAPB] = &s4_vapb.hw, > + [CLKID_GE2D] = &s4_ge2d_gate.hw, > + [CLKID_VDIN_MEAS_SEL] = &s4_vdin_meas_mux.hw, > + [CLKID_VDIN_MEAS_DIV] = &s4_vdin_meas_div.hw, > + [CLKID_VDIN_MEAS_GATE] = &s4_vdin_meas_gate.hw, > + [CLKID_SD_EMMC_C_CLK_SEL] = &s4_sd_emmc_c_clk0_sel.hw, > + [CLKID_SD_EMMC_C_CLK_DIV] = &s4_sd_emmc_c_clk0_div.hw, > + [CLKID_SD_EMMC_C_CLK] = &s4_sd_emmc_c_clk0.hw, > + [CLKID_SD_EMMC_A_CLK_SEL] = &s4_sd_emmc_a_clk0_sel.hw, > + [CLKID_SD_EMMC_A_CLK_DIV] = &s4_sd_emmc_a_clk0_div.hw, > + [CLKID_SD_EMMC_A_CLK] = &s4_sd_emmc_a_clk0.hw, > + [CLKID_SD_EMMC_B_CLK_SEL] = &s4_sd_emmc_b_clk0_sel.hw, > + [CLKID_SD_EMMC_B_CLK_DIV] = &s4_sd_emmc_b_clk0_div.hw, > + [CLKID_SD_EMMC_B_CLK] = &s4_sd_emmc_b_clk0.hw, > + [CLKID_SPICC0_SEL] = &s4_spicc0_mux.hw, > + [CLKID_SPICC0_DIV] = &s4_spicc0_div.hw, > + [CLKID_SPICC0_GATE] = &s4_spicc0_gate.hw, > + [CLKID_PWM_A_SEL] = &s4_pwm_a_mux.hw, > + [CLKID_PWM_A_DIV] = &s4_pwm_a_div.hw, > + [CLKID_PWM_A_GATE] = &s4_pwm_a_gate.hw, > + [CLKID_PWM_B_SEL] = &s4_pwm_b_mux.hw, > + [CLKID_PWM_B_DIV] = &s4_pwm_b_div.hw, > + [CLKID_PWM_B_GATE] = &s4_pwm_b_gate.hw, > + [CLKID_PWM_C_SEL] = &s4_pwm_c_mux.hw, > + [CLKID_PWM_C_DIV] = &s4_pwm_c_div.hw, > + [CLKID_PWM_C_GATE] = &s4_pwm_c_gate.hw, > + [CLKID_PWM_D_SEL] = &s4_pwm_d_mux.hw, > + [CLKID_PWM_D_DIV] = &s4_pwm_d_div.hw, > + [CLKID_PWM_D_GATE] = &s4_pwm_d_gate.hw, > + [CLKID_PWM_E_SEL] = &s4_pwm_e_mux.hw, > + [CLKID_PWM_E_DIV] = &s4_pwm_e_div.hw, > + [CLKID_PWM_E_GATE] = &s4_pwm_e_gate.hw, > + [CLKID_PWM_F_SEL] = &s4_pwm_f_mux.hw, > + [CLKID_PWM_F_DIV] = &s4_pwm_f_div.hw, > + [CLKID_PWM_F_GATE] = &s4_pwm_f_gate.hw, > + [CLKID_PWM_G_SEL] = &s4_pwm_g_mux.hw, > + [CLKID_PWM_G_DIV] = &s4_pwm_g_div.hw, > + [CLKID_PWM_G_GATE] = &s4_pwm_g_gate.hw, > + [CLKID_PWM_H_SEL] = &s4_pwm_h_mux.hw, > + [CLKID_PWM_H_DIV] = &s4_pwm_h_div.hw, > + [CLKID_PWM_H_GATE] = &s4_pwm_h_gate.hw, > + [CLKID_PWM_I_SEL] = &s4_pwm_i_mux.hw, > + [CLKID_PWM_I_DIV] = &s4_pwm_i_div.hw, > + [CLKID_PWM_I_GATE] = &s4_pwm_i_gate.hw, > + [CLKID_PWM_J_SEL] = &s4_pwm_j_mux.hw, > + [CLKID_PWM_J_DIV] = &s4_pwm_j_div.hw, > + [CLKID_PWM_J_GATE] = &s4_pwm_j_gate.hw, > + [CLKID_SARADC_SEL] = &s4_saradc_mux.hw, > + [CLKID_SARADC_DIV] = &s4_saradc_div.hw, > + [CLKID_SARADC_GATE] = &s4_saradc_gate.hw, > + [CLKID_GEN_SEL] = &s4_gen_clk_sel.hw, > + [CLKID_GEN_DIV] = &s4_gen_clk_div.hw, > + [CLKID_GEN_GATE] = &s4_gen_clk.hw, > + [CLKID_DDR] = &s4_ddr.hw, > + [CLKID_DOS] = &s4_dos.hw, > + [CLKID_ETHPHY] = &s4_ethphy.hw, > + [CLKID_MALI_GATE] = &s4_mali.hw, > + [CLKID_AOCPU] = &s4_aocpu.hw, > + [CLKID_AUCPU] = &s4_aucpu.hw, > + [CLKID_CEC] = &s4_cec.hw, > + [CLKID_SD_EMMC_A] = &s4_sdemmca.hw, > + [CLKID_SD_EMMC_B] = &s4_sdemmcb.hw, > + [CLKID_NAND] = &s4_nand.hw, > + [CLKID_SMARTCARD] = &s4_smartcard.hw, > + [CLKID_ACODEC] = &s4_acodec.hw, > + [CLKID_SPIFC] = &s4_spifc.hw, > + [CLKID_MSR_CLK] = &s4_msr_clk.hw, > + [CLKID_IR_CTRL] = &s4_ir_ctrl.hw, > + [CLKID_AUDIO] = &s4_audio.hw, > + [CLKID_ETH] = &s4_eth.hw, > + [CLKID_UART_A] = &s4_uart_a.hw, > + [CLKID_UART_B] = &s4_uart_b.hw, > + [CLKID_UART_C] = &s4_uart_c.hw, > + [CLKID_UART_D] = &s4_uart_d.hw, > + [CLKID_UART_E] = &s4_uart_e.hw, > + [CLKID_AIFIFO] = &s4_aififo.hw, > + [CLKID_TS_DDR] = &s4_ts_ddr.hw, > + [CLKID_TS_PLL] = &s4_ts_pll.hw, > + [CLKID_G2D] = &s4_g2d.hw, > + [CLKID_SPICC0] = &s4_spicc0.hw, > + [CLKID_USB] = &s4_usb.hw, > + [CLKID_I2C_M_A] = &s4_i2c_m_a.hw, > + [CLKID_I2C_M_B] = &s4_i2c_m_b.hw, > + [CLKID_I2C_M_C] = &s4_i2c_m_c.hw, > + [CLKID_I2C_M_D] = &s4_i2c_m_d.hw, > + [CLKID_I2C_M_E] = &s4_i2c_m_e.hw, > + [CLKID_HDMITX_APB] = &s4_hdmitx_apb.hw, > + [CLKID_I2C_S_A] = &s4_i2c_s_a.hw, > + [CLKID_USB1_TO_DDR] = &s4_usb1_to_ddr.hw, > + [CLKID_HDCP22] = &s4_hdcp22.hw, > + [CLKID_MMC_APB] = &s4_mmc_apb.hw, > + [CLKID_RSA] = &s4_rsa.hw, > + [CLKID_CPU_DEBUG] = &s4_cpu_debug.hw, > + [CLKID_VPU_INTR] = &s4_vpu_intr.hw, > + [CLKID_DEMOD] = &s4_demod.hw, > + [CLKID_SAR_ADC] = &s4_sar_adc.hw, > + [CLKID_GIC] = &s4_gic.hw, > + [CLKID_PWM_AB] = &s4_pwm_ab.hw, > + [CLKID_PWM_CD] = &s4_pwm_cd.hw, > + [CLKID_PWM_EF] = &s4_pwm_ef.hw, > + [CLKID_PWM_GH] = &s4_pwm_gh.hw, > + [CLKID_PWM_IJ] = &s4_pwm_ij.hw, > + [CLKID_HDCP22_ESMCLK_SEL] = &s4_hdcp22_esmclk_mux.hw, > + [CLKID_HDCP22_ESMCLK_DIV] = &s4_hdcp22_esmclk_div.hw, > + [CLKID_HDCP22_ESMCLK_GATE] = &s4_hdcp22_esmclk_gate.hw, > + [CLKID_HDCP22_SKPCLK_SEL] = &s4_hdcp22_skpclk_mux.hw, > + [CLKID_HDCP22_SKPCLK_DIV] = &s4_hdcp22_skpclk_div.hw, > + [CLKID_HDCP22_SKPCLK_GATE] = &s4_hdcp22_skpclk_gate.hw, > + [NR_CLKS] = NULL > + }, > + .num = NR_CLKS, > +}; > + > +/* Convenience table to populate regmap in .probe */ > +static struct clk_regmap *const s4_periphs_clk_regmaps[] = { > + &s4_rtc_32k_by_oscin_clkin, > + &s4_rtc_32k_by_oscin_div, > + &s4_rtc_32k_by_oscin_sel, > + &s4_rtc_32k_by_oscin, > + &s4_rtc_clk, > + &s4_sysclk_b_sel, > + &s4_sysclk_b_div, > + &s4_sysclk_b, > + &s4_sysclk_a_sel, > + &s4_sysclk_a_div, > + &s4_sysclk_a, > + &s4_sys_clk, > + &s4_ceca_32k_clkin, > + &s4_ceca_32k_div, > + &s4_ceca_32k_sel_pre, > + &s4_ceca_32k_sel, > + &s4_ceca_32k_clkout, > + &s4_cecb_32k_clkin, > + &s4_cecb_32k_div, > + &s4_cecb_32k_sel_pre, > + &s4_cecb_32k_sel, > + &s4_cecb_32k_clkout, > + &s4_sc_clk_mux, > + &s4_sc_clk_div, > + &s4_sc_clk_gate, > + &s4_12_24M_clk_gate, > + &s4_12_24M_clk, > + &s4_vid_pll_div, > + &s4_vid_pll_sel, > + &s4_vid_pll, > + &s4_vclk_sel, > + &s4_vclk2_sel, > + &s4_vclk_input, > + &s4_vclk2_input, > + &s4_vclk_div, > + &s4_vclk2_div, > + &s4_vclk, > + &s4_vclk2, > + &s4_vclk_div1, > + &s4_vclk_div2_en, > + &s4_vclk_div4_en, > + &s4_vclk_div6_en, > + &s4_vclk_div12_en, > + &s4_vclk2_div1, > + &s4_vclk2_div2_en, > + &s4_vclk2_div4_en, > + &s4_vclk2_div6_en, > + &s4_vclk2_div12_en, > + &s4_cts_enci_sel, > + &s4_cts_encp_sel, > + &s4_cts_vdac_sel, > + &s4_hdmi_tx_sel, > + &s4_cts_enci, > + &s4_cts_encp, > + &s4_cts_vdac, > + &s4_hdmi_tx, > + &s4_hdmi_sel, > + &s4_hdmi_div, > + &s4_hdmi, > + &s4_ts_clk_div, > + &s4_ts_clk_gate, > + &s4_mali_0_sel, > + &s4_mali_0_div, > + &s4_mali_0, > + &s4_mali_1_sel, > + &s4_mali_1_div, > + &s4_mali_1, > + &s4_mali_mux, > + &s4_vdec_p0_mux, > + &s4_vdec_p0_div, > + &s4_vdec_p0, > + &s4_vdec_p1_mux, > + &s4_vdec_p1_div, > + &s4_vdec_p1, > + &s4_vdec_mux, > + &s4_hevcf_p0_mux, > + &s4_hevcf_p0_div, > + &s4_hevcf_p0, > + &s4_hevcf_p1_mux, > + &s4_hevcf_p1_div, > + &s4_hevcf_p1, > + &s4_hevcf_mux, > + &s4_vpu_0_sel, > + &s4_vpu_0_div, > + &s4_vpu_0, > + &s4_vpu_1_sel, > + &s4_vpu_1_div, > + &s4_vpu_1, > + &s4_vpu, > + &s4_vpu_clkb_tmp_mux, > + &s4_vpu_clkb_tmp_div, > + &s4_vpu_clkb_tmp, > + &s4_vpu_clkb_div, > + &s4_vpu_clkb, > + &s4_vpu_clkc_p0_mux, > + &s4_vpu_clkc_p0_div, > + &s4_vpu_clkc_p0, > + &s4_vpu_clkc_p1_mux, > + &s4_vpu_clkc_p1_div, > + &s4_vpu_clkc_p1, > + &s4_vpu_clkc_mux, > + &s4_vapb_0_sel, > + &s4_vapb_0_div, > + &s4_vapb_0, > + &s4_vapb_1_sel, > + &s4_vapb_1_div, > + &s4_vapb_1, > + &s4_vapb, > + &s4_ge2d_gate, > + &s4_hdcp22_esmclk_mux, > + &s4_hdcp22_esmclk_div, > + &s4_hdcp22_esmclk_gate, > + &s4_hdcp22_skpclk_mux, > + &s4_hdcp22_skpclk_div, > + &s4_hdcp22_skpclk_gate, > + &s4_vdin_meas_mux, > + &s4_vdin_meas_div, > + &s4_vdin_meas_gate, > + &s4_sd_emmc_c_clk0_sel, > + &s4_sd_emmc_c_clk0_div, > + &s4_sd_emmc_c_clk0, > + &s4_sd_emmc_a_clk0_sel, > + &s4_sd_emmc_a_clk0_div, > + &s4_sd_emmc_a_clk0, > + &s4_sd_emmc_b_clk0_sel, > + &s4_sd_emmc_b_clk0_div, > + &s4_sd_emmc_b_clk0, > + &s4_spicc0_mux, > + &s4_spicc0_div, > + &s4_spicc0_gate, > + &s4_pwm_a_mux, > + &s4_pwm_a_div, > + &s4_pwm_a_gate, > + &s4_pwm_b_mux, > + &s4_pwm_b_div, > + &s4_pwm_b_gate, > + &s4_pwm_c_mux, > + &s4_pwm_c_div, > + &s4_pwm_c_gate, > + &s4_pwm_d_mux, > + &s4_pwm_d_div, > + &s4_pwm_d_gate, > + &s4_pwm_e_mux, > + &s4_pwm_e_div, > + &s4_pwm_e_gate, > + &s4_pwm_f_mux, > + &s4_pwm_f_div, > + &s4_pwm_f_gate, > + &s4_pwm_g_mux, > + &s4_pwm_g_div, > + &s4_pwm_g_gate, > + &s4_pwm_h_mux, > + &s4_pwm_h_div, > + &s4_pwm_h_gate, > + &s4_pwm_i_mux, > + &s4_pwm_i_div, > + &s4_pwm_i_gate, > + &s4_pwm_j_mux, > + &s4_pwm_j_div, > + &s4_pwm_j_gate, > + &s4_saradc_mux, > + &s4_saradc_div, > + &s4_saradc_gate, > + &s4_gen_clk_sel, > + &s4_gen_clk_div, > + &s4_gen_clk, > + &s4_ddr, > + &s4_dos, > + &s4_ethphy, > + &s4_mali, > + &s4_aocpu, > + &s4_aucpu, > + &s4_cec, > + &s4_sdemmca, > + &s4_sdemmcb, > + &s4_nand, > + &s4_smartcard, > + &s4_acodec, > + &s4_spifc, > + &s4_msr_clk, > + &s4_ir_ctrl, > + &s4_audio, > + &s4_eth, > + &s4_uart_a, > + &s4_uart_b, > + &s4_uart_c, > + &s4_uart_d, > + &s4_uart_e, > + &s4_aififo, > + &s4_ts_ddr, > + &s4_ts_pll, > + &s4_g2d, > + &s4_spicc0, > + &s4_usb, > + &s4_i2c_m_a, > + &s4_i2c_m_b, > + &s4_i2c_m_c, > + &s4_i2c_m_d, > + &s4_i2c_m_e, > + &s4_hdmitx_apb, > + &s4_i2c_s_a, > + &s4_usb1_to_ddr, > + &s4_hdcp22, > + &s4_mmc_apb, > + &s4_rsa, > + &s4_cpu_debug, > + &s4_vpu_intr, > + &s4_demod, > + &s4_sar_adc, > + &s4_gic, > + &s4_pwm_ab, > + &s4_pwm_cd, > + &s4_pwm_ef, > + &s4_pwm_gh, > + &s4_pwm_ij, > + &s4_demod_core_clk_mux, > + &s4_demod_core_clk_div, > + &s4_demod_core_clk_gate, > + &s4_adc_extclk_in_mux, > + &s4_adc_extclk_in_div, > + &s4_adc_extclk_in_gate, > +}; > + > +static struct regmap_config clkc_regmap_config = { > + .reg_bits = 32, > + .val_bits = 32, > + .reg_stride = 4, > +}; > + > +static int meson_s4_periphs_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct regmap *regmap; > + void __iomem *base; > + int ret, i; > + > + base = devm_platform_ioremap_resource(pdev, 0); > + if (IS_ERR(base)) > + return PTR_ERR(base); > + > + regmap = devm_regmap_init_mmio(dev, base, &clkc_regmap_config); > + if (IS_ERR(regmap)) > + return PTR_ERR(regmap); > + > + /* Populate regmap for the regmap backed clocks */ > + for (i = 0; i < ARRAY_SIZE(s4_periphs_clk_regmaps); i++) > + s4_periphs_clk_regmaps[i]->map = regmap; > + > + for (i = 0; i < s4_periphs_hw_onecell_data.num; i++) { > + /* array might be sparse */ > + if (!s4_periphs_hw_onecell_data.hws[i]) > + continue; > + > + ret = devm_clk_hw_register(dev, s4_periphs_hw_onecell_data.hws[i]); > + if (ret) { > + dev_err(dev, "Clock registration failed\n"); > + return ret; > + } > + } > + > + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, > + &s4_periphs_hw_onecell_data); > +} > + > +static const struct of_device_id clkc_match_table[] = { > + { > + .compatible = "amlogic,s4-peripherals-clkc", > + }, > + {} > +}; > + > +static struct platform_driver s4_driver = { > + .probe = meson_s4_periphs_probe, > + .driver = { > + .name = "s4-periphs-clkc", > + .of_match_table = clkc_match_table, > + }, > +}; > + > +module_platform_driver(s4_driver); > +MODULE_LICENSE("GPL"); > diff --git a/drivers/clk/meson/s4-peripherals.h b/drivers/clk/meson/s4-peripherals.h > new file mode 100644 > index 000000000000..13ef07bada83 > --- /dev/null > +++ b/drivers/clk/meson/s4-peripherals.h > @@ -0,0 +1,218 @@ > +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ > +/* > + * Copyright (c) 2021 Amlogic, inc. > + * Author: Yu Tu <yu.tu@amlogic.com> > + */ > + > +#ifndef __MESON_S4_PERIPHERALS_H__ > +#define __MESON_S4_PERIPHERALS_H__ > + > +/* > + * Clock controller register offsets > + * REG_BASE: REGISTER_BASE_ADDR = 0xfe000000 > + */ > +#define CLKCTRL_OSCIN_CTRL 0x004 > +#define CLKCTRL_RTC_BY_OSCIN_CTRL0 0x008 > +#define CLKCTRL_RTC_BY_OSCIN_CTRL1 0x00c > +#define CLKCTRL_RTC_CTRL 0x010 > +#define CLKCTRL_CHECK_CLK_RESULT 0x014 > +#define CLKCTRL_MBIST_ATSPEED_CTRL 0x018 > +#define CLKCTRL_LOCK_BIT_REG0 0x020 > +#define CLKCTRL_LOCK_BIT_REG1 0x024 > +#define CLKCTRL_LOCK_BIT_REG2 0x028 > +#define CLKCTRL_LOCK_BIT_REG3 0x02c > +#define CLKCTRL_PROT_BIT_REG0 0x030 > +#define CLKCTRL_PROT_BIT_REG1 0x034 > +#define CLKCTRL_PROT_BIT_REG2 0x038 > +#define CLKCTRL_PROT_BIT_REG3 0x03c > +#define CLKCTRL_SYS_CLK_CTRL0 0x040 > +#define CLKCTRL_SYS_CLK_EN0_REG0 0x044 > +#define CLKCTRL_SYS_CLK_EN0_REG1 0x048 > +#define CLKCTRL_SYS_CLK_EN0_REG2 0x04c > +#define CLKCTRL_SYS_CLK_EN0_REG3 0x050 > +#define CLKCTRL_SYS_CLK_EN1_REG0 0x054 > +#define CLKCTRL_SYS_CLK_EN1_REG1 0x058 > +#define CLKCTRL_SYS_CLK_EN1_REG2 0x05c > +#define CLKCTRL_SYS_CLK_EN1_REG3 0x060 > +#define CLKCTRL_SYS_CLK_VPU_EN0 0x064 > +#define CLKCTRL_SYS_CLK_VPU_EN1 0x068 > +#define CLKCTRL_AXI_CLK_CTRL0 0x06c > +#define CLKCTRL_TST_CTRL0 0x080 > +#define CLKCTRL_TST_CTRL1 0x084 > +#define CLKCTRL_CECA_CTRL0 0x088 > +#define CLKCTRL_CECA_CTRL1 0x08c > +#define CLKCTRL_CECB_CTRL0 0x090 > +#define CLKCTRL_CECB_CTRL1 0x094 > +#define CLKCTRL_SC_CLK_CTRL 0x098 > +#define CLKCTRL_RAMA_CLK_CTRL0 0x0a4 > +#define CLKCTRL_CLK12_24_CTRL 0x0a8 > +#define CLKCTRL_VID_CLK_CTRL 0x0c0 > +#define CLKCTRL_VID_CLK_CTRL2 0x0c4 > +#define CLKCTRL_VID_CLK_DIV 0x0c8 > +#define CLKCTRL_VIID_CLK_DIV 0x0cc > +#define CLKCTRL_VIID_CLK_CTRL 0x0d0 > +#define CLKCTRL_HDMI_CLK_CTRL 0x0e0 > +#define CLKCTRL_VID_PLL_CLK_DIV 0x0e4 > +#define CLKCTRL_VPU_CLK_CTRL 0x0e8 > +#define CLKCTRL_VPU_CLKB_CTRL 0x0ec > +#define CLKCTRL_VPU_CLKC_CTRL 0x0f0 > +#define CLKCTRL_VID_LOCK_CLK_CTRL 0x0f4 > +#define CLKCTRL_VDIN_MEAS_CLK_CTRL 0x0f8 > +#define CLKCTRL_VAPBCLK_CTRL 0x0fc > +#define CLKCTRL_HDCP22_CTRL 0x100 > +#define CLKCTRL_CDAC_CLK_CTRL 0x108 > +#define CLKCTRL_VDEC_CLK_CTRL 0x140 > +#define CLKCTRL_VDEC2_CLK_CTRL 0x144 > +#define CLKCTRL_VDEC3_CLK_CTRL 0x148 > +#define CLKCTRL_VDEC4_CLK_CTRL 0x14c > +#define CLKCTRL_TS_CLK_CTRL 0x158 > +#define CLKCTRL_MALI_CLK_CTRL 0x15c > +#define CLKCTRL_ETH_CLK_CTRL 0x164 > +#define CLKCTRL_NAND_CLK_CTRL 0x168 > +#define CLKCTRL_SD_EMMC_CLK_CTRL 0x16c > +#define CLKCTRL_SPICC_CLK_CTRL 0x174 > +#define CLKCTRL_GEN_CLK_CTRL 0x178 > +#define CLKCTRL_SAR_CLK_CTRL 0x17c > +#define CLKCTRL_PWM_CLK_AB_CTRL 0x180 > +#define CLKCTRL_PWM_CLK_CD_CTRL 0x184 > +#define CLKCTRL_PWM_CLK_EF_CTRL 0x188 > +#define CLKCTRL_PWM_CLK_GH_CTRL 0x18c > +#define CLKCTRL_PWM_CLK_IJ_CTRL 0x190 > +#define CLKCTRL_DEMOD_CLK_CTRL 0x200 > +#define CLKCTRL_TIMESTAMP_CTRL 0x400 > +#define CLKCTRL_TIMESTAMP_CTRL1 0x404 > +#define CLKCTRL_TIMESTAMP_CTRL2 0x40c > +#define CLKCTRL_TIMESTAMP_RD0 0x410 > +#define CLKCTRL_TIMESTAMP_RD1 0x414 > +#define CLKCTRL_TIMEBASE_CTRL0 0x418 > +#define CLKCTRL_TIMEBASE_CTRL1 0x41c > +#define CLKCTRL_EFUSE_CPU_CFG01 0x480 > +#define CLKCTRL_EFUSE_CPU_CFG2 0x484 > +#define CLKCTRL_EFUSE_ENCP_CFG0 0x488 > +#define CLKCTRL_EFUSE_MALI_CFG01 0x48c > +#define CLKCTRL_EFUSE_LOCK 0x498 > + > +/* > + * CLKID index values > + * > + * These indices are entirely contrived and do not map onto the hardware. > + * It has now been decided to expose everything by default in the DT header: > + * include/dt-bindings/clock/axg-clkc.h. Only the clocks ids we don't want > + * to expose, such as the internal muxes and dividers of composite clocks, > + * will remain defined here. > + */ > +#define CLKID_RTC_32K_CLKIN 0 > +#define CLKID_RTC_32K_DIV 1 > +#define CLKID_RTC_32K_SEL 2 > +#define CLKID_RTC_32K_XATL 3 > +#define CLKID_SYS_CLK_B_SEL 5 > +#define CLKID_SYS_CLK_B_DIV 6 > +#define CLKID_SYS_CLK_A_SEL 8 > +#define CLKID_SYS_CLK_A_DIV 9 > +#define CLKID_CECA_32K_CLKIN 12 > +#define CLKID_CECA_32K_DIV 13 > +#define CLKID_CECA_32K_SEL_PRE 14 > +#define CLKID_CECA_32K_SEL 15 > +#define CLKID_CECB_32K_CLKIN 17 > +#define CLKID_CECB_32K_DIV 18 > +#define CLKID_CECB_32K_SEL_PRE 19 > +#define CLKID_CECB_32K_SEL 20 > +#define CLKID_SC_CLK_SEL 22 > +#define CLKID_SC_CLK_DIV 23 > +#define CLKID_12_24M_CLK_GATE 25 > +#define CLKID_12M_CLK_DIV 26 > +#define CLKID_VID_PLL_DIV 28 > +#define CLKID_VID_PLL_SEL 29 > +#define CLKID_VCLK_SEL 31 > +#define CLKID_VCLK2_SEL 32 > +#define CLKID_VCLK_INPUT 33 > +#define CLKID_VCLK2_INPUT 34 > +#define CLKID_VCLK_DIV 35 > +#define CLKID_VCLK2_DIV 36 > +#define CLKID_VCLK_DIV2_EN 40 > +#define CLKID_VCLK_DIV4_EN 41 > +#define CLKID_VCLK_DIV6_EN 42 > +#define CLKID_VCLK_DIV12_EN 43 > +#define CLKID_VCLK2_DIV2_EN 45 > +#define CLKID_VCLK2_DIV4_EN 46 > +#define CLKID_VCLK2_DIV6_EN 47 > +#define CLKID_VCLK2_DIV12_EN 48 > +#define CLKID_CTS_ENCI_SEL 57 > +#define CLKID_CTS_ENCP_SEL 58 > +#define CLKID_CTS_VDAC_SEL 59 > +#define CLKID_HDMI_TX_SEL 60 > +#define CLKID_HDMI_TX 64 > +#define CLKID_HDMI_SEL 65 > +#define CLKID_HDMI_DIV 66 > +#define CLKID_TS_CLK_DIV 68 > +#define CLKID_MALI_0_SEL 70 > +#define CLKID_MALI_0_DIV 71 > +#define CLKID_MALI_1_SEL 73 > +#define CLKID_MALI_1_DIV 74 > +#define CLKID_VDEC_P0_SEL 77 > +#define CLKID_VDEC_P0_DIV 78 > +#define CLKID_VDEC_P1_SEL 80 > +#define CLKID_VDEC_P1_DIV 81 > +#define CLKID_HEVCF_P0_SEL 84 > +#define CLKID_HEVCF_P0_DIV 85 > +#define CLKID_HEVCF_P1_SEL 87 > +#define CLKID_HEVCF_P1_DIV 88 > +#define CLKID_VPU_0_SEL 91 > +#define CLKID_VPU_0_DIV 92 > +#define CLKID_VPU_1_SEL 94 > +#define CLKID_VPU_1_DIV 95 > +#define CLKID_VPU_CLKB_TMP_SEL 98 > +#define CLKID_VPU_CLKB_TMP_DIV 99 > +#define CLKID_VPU_CLKB_DIV 101 > +#define CLKID_VPU_CLKC_P0_SEL 103 > +#define CLKID_VPU_CLKC_P0_DIV 104 > +#define CLKID_VPU_CLKC_P1_SEL 106 > +#define CLKID_VPU_CLKC_P1_DIV 107 > +#define CLKID_VAPB_0_SEL 110 > +#define CLKID_VAPB_0_DIV 111 > +#define CLKID_VAPB_1_SEL 113 > +#define CLKID_VAPB_1_DIV 114 > +#define CLKID_VDIN_MEAS_SEL 118 > +#define CLKID_VDIN_MEAS_DIV 119 > +#define CLKID_SD_EMMC_C_CLK_SEL 121 > +#define CLKID_SD_EMMC_C_CLK_DIV 122 > +#define CLKID_SD_EMMC_A_CLK_SEL 124 > +#define CLKID_SD_EMMC_A_CLK_DIV 125 > +#define CLKID_SD_EMMC_B_CLK_SEL 127 > +#define CLKID_SD_EMMC_B_CLK_DIV 128 > +#define CLKID_SPICC0_SEL 130 > +#define CLKID_SPICC0_DIV 131 > +#define CLKID_PWM_A_SEL 133 > +#define CLKID_PWM_A_DIV 134 > +#define CLKID_PWM_B_SEL 136 > +#define CLKID_PWM_B_DIV 137 > +#define CLKID_PWM_C_SEL 139 > +#define CLKID_PWM_C_DIV 140 > +#define CLKID_PWM_D_SEL 142 > +#define CLKID_PWM_D_DIV 143 > +#define CLKID_PWM_E_SEL 145 > +#define CLKID_PWM_E_DIV 146 > +#define CLKID_PWM_F_SEL 148 > +#define CLKID_PWM_F_DIV 149 > +#define CLKID_PWM_G_SEL 151 > +#define CLKID_PWM_G_DIV 152 > +#define CLKID_PWM_H_SEL 154 > +#define CLKID_PWM_H_DIV 155 > +#define CLKID_PWM_I_SEL 157 > +#define CLKID_PWM_I_DIV 158 > +#define CLKID_PWM_J_SEL 160 > +#define CLKID_PWM_J_DIV 161 > +#define CLKID_SARADC_SEL 163 > +#define CLKID_SARADC_DIV 164 > +#define CLKID_GEN_SEL 166 > +#define CLKID_GEN_DIV 167 > +#define CLKID_HDCP22_ESMCLK_SEL 219 > +#define CLKID_HDCP22_ESMCLK_DIV 220 > +#define CLKID_HDCP22_SKPCLK_SEL 222 > +#define CLKID_HDCP22_SKPCLK_DIV 223 > + > +#define NR_CLKS 225 > +/* include the CLKIDs that have been made part of the DT binding */ > +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> > + > +#endif /* __MESON_S4_PERIPHERALS_H__ */ > diff --git a/include/dt-bindings/clock/amlogic,s4-peripherals-clkc.h b/include/dt-bindings/clock/amlogic,s4-peripherals-clkc.h > new file mode 100644 > index 000000000000..bbec5094d5c3 > --- /dev/null > +++ b/include/dt-bindings/clock/amlogic,s4-peripherals-clkc.h > @@ -0,0 +1,131 @@ > +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ > +/* > + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. > + * Author: Yu Tu <yu.tu@amlogic.com> > + */ > + > +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PERIPHERALS_CLKC_H > +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PERIPHERALS_CLKC_H > + > +/* > + * CLKID index values > + */ > + > +#define CLKID_RTC_CLK 4 > +#define CLKID_SYS_CLK_B_GATE 7 > +#define CLKID_SYS_CLK_A_GATE 10 > +#define CLKID_SYS_CLK 11 > +#define CLKID_CECA_32K_CLKOUT 16 > +#define CLKID_CECB_32K_CLKOUT 21 > +#define CLKID_SC_CLK_GATE 24 > +#define CLKID_12_24M_CLK_SEL 27 > +#define CLKID_VID_PLL 30 > +#define CLKID_VCLK 37 > +#define CLKID_VCLK2 38 > +#define CLKID_VCLK_DIV1 39 > +#define CLKID_VCLK2_DIV1 44 > +#define CLKID_VCLK_DIV2 49 > +#define CLKID_VCLK_DIV4 50 > +#define CLKID_VCLK_DIV6 51 > +#define CLKID_VCLK_DIV12 52 > +#define CLKID_VCLK2_DIV2 53 > +#define CLKID_VCLK2_DIV4 54 > +#define CLKID_VCLK2_DIV6 55 > +#define CLKID_VCLK2_DIV12 56 > +#define CLKID_CTS_ENCI 61 > +#define CLKID_CTS_ENCP 62 > +#define CLKID_CTS_VDAC 63 > +#define CLKID_HDMI 67 > +#define CLKID_TS_CLK_GATE 69 > +#define CLKID_MALI_0 72 > +#define CLKID_MALI_1 75 > +#define CLKID_MALI 76 > +#define CLKID_VDEC_P0 79 > +#define CLKID_VDEC_P1 82 > +#define CLKID_VDEC_SEL 83 > +#define CLKID_HEVCF_P0 86 > +#define CLKID_HEVCF_P1 89 > +#define CLKID_HEVCF_SEL 90 > +#define CLKID_VPU_0 93 > +#define CLKID_VPU_1 96 > +#define CLKID_VPU 97 > +#define CLKID_VPU_CLKB_TMP 100 > +#define CLKID_VPU_CLKB 102 > +#define CLKID_VPU_CLKC_P0 105 > +#define CLKID_VPU_CLKC_P1 108 > +#define CLKID_VPU_CLKC_SEL 109 > +#define CLKID_VAPB_0 112 > +#define CLKID_VAPB_1 115 > +#define CLKID_VAPB 116 > +#define CLKID_GE2D 117 > +#define CLKID_VDIN_MEAS_GATE 120 > +#define CLKID_SD_EMMC_C_CLK 123 > +#define CLKID_SD_EMMC_A_CLK 126 > +#define CLKID_SD_EMMC_B_CLK 129 > +#define CLKID_SPICC0_GATE 132 > +#define CLKID_PWM_A_GATE 135 > +#define CLKID_PWM_B_GATE 138 > +#define CLKID_PWM_C_GATE 141 > +#define CLKID_PWM_D_GATE 144 > +#define CLKID_PWM_E_GATE 147 > +#define CLKID_PWM_F_GATE 150 > +#define CLKID_PWM_G_GATE 153 > +#define CLKID_PWM_H_GATE 156 > +#define CLKID_PWM_I_GATE 159 > +#define CLKID_PWM_J_GATE 162 > +#define CLKID_SARADC_GATE 165 > +#define CLKID_GEN_GATE 168 > +#define CLKID_DDR 169 > +#define CLKID_DOS 170 > +#define CLKID_ETHPHY 171 > +#define CLKID_MALI_GATE 172 > +#define CLKID_AOCPU 173 > +#define CLKID_AUCPU 174 > +#define CLKID_CEC 175 > +#define CLKID_SD_EMMC_A 176 > +#define CLKID_SD_EMMC_B 177 > +#define CLKID_NAND 178 > +#define CLKID_SMARTCARD 179 > +#define CLKID_ACODEC 180 > +#define CLKID_SPIFC 181 > +#define CLKID_MSR_CLK 182 > +#define CLKID_IR_CTRL 183 > +#define CLKID_AUDIO 184 > +#define CLKID_ETH 185 > +#define CLKID_UART_A 186 > +#define CLKID_UART_B 187 > +#define CLKID_UART_C 188 > +#define CLKID_UART_D 189 > +#define CLKID_UART_E 190 > +#define CLKID_AIFIFO 191 > +#define CLKID_TS_DDR 192 > +#define CLKID_TS_PLL 193 > +#define CLKID_G2D 194 > +#define CLKID_SPICC0 195 > +#define CLKID_SPICC1 196 > +#define CLKID_USB 197 > +#define CLKID_I2C_M_A 198 > +#define CLKID_I2C_M_B 199 > +#define CLKID_I2C_M_C 200 > +#define CLKID_I2C_M_D 201 > +#define CLKID_I2C_M_E 202 > +#define CLKID_HDMITX_APB 203 > +#define CLKID_I2C_S_A 204 > +#define CLKID_USB1_TO_DDR 205 > +#define CLKID_HDCP22 206 > +#define CLKID_MMC_APB 207 > +#define CLKID_RSA 208 > +#define CLKID_CPU_DEBUG 209 > +#define CLKID_VPU_INTR 210 > +#define CLKID_DEMOD 211 > +#define CLKID_SAR_ADC 212 > +#define CLKID_GIC 213 > +#define CLKID_PWM_AB 214 > +#define CLKID_PWM_CD 215 > +#define CLKID_PWM_EF 216 > +#define CLKID_PWM_GH 217 > +#define CLKID_PWM_IJ 218 > +#define CLKID_HDCP22_ESMCLK_GATE 221 > +#define CLKID_HDCP22_SKPCLK_GATE 224 > + > +#endif /* _DT_BINDINGS_CLOCK_AMLOGIC_S4_PERIPHERALS_CLKC_H */ _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 3/4] clk: meson: s4: add s4 SoC peripheral clock controller driver and bindings 2022-11-25 9:54 ` Jerome Brunet @ 2022-11-28 8:08 ` Yu Tu -1 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-28 8:08 UTC (permalink / raw) To: Jerome Brunet, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang Hi Jerome, On 2022/11/25 17:54, Jerome Brunet wrote: > [ EXTERNAL EMAIL ] > > > On Wed 23 Nov 2022 at 10:13, Yu Tu <yu.tu@amlogic.com> wrote: > >> Add the peripherals clock controller found and bindings in the s4 SoC family. >> >> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >> --- >> .../clock/amlogic,s4-peripherals-clkc.yaml | 105 + >> drivers/clk/meson/Kconfig | 12 + >> drivers/clk/meson/Makefile | 1 + >> drivers/clk/meson/s4-peripherals.c | 3783 +++++++++++++++++ >> drivers/clk/meson/s4-peripherals.h | 218 + >> .../clock/amlogic,s4-peripherals-clkc.h | 131 + >> 6 files changed, 4250 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml >> create mode 100644 drivers/clk/meson/s4-peripherals.c >> create mode 100644 drivers/clk/meson/s4-peripherals.h >> create mode 100644 include/dt-bindings/clock/amlogic,s4-peripherals-clkc.h >> >> diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml >> new file mode 100644 >> index 000000000000..d1ea05ab7ec9 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml >> @@ -0,0 +1,105 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/clock/amlogic,s4-peripherals-clkc.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Amlogic Meson S serials Peripherals Clock Controller >> + >> +maintainers: >> + - Neil Armstrong <narmstrong@baylibre.com> >> + - Jerome Brunet <jbrunet@baylibre.com> >> + - Yu Tu <yu.hu@amlogic.com> >> + >> + >> +properties: >> + compatible: >> + const: amlogic,s4-peripherals-clkc >> + >> + reg: >> + maxItems: 1 >> + >> + clocks: >> + items: >> + - description: input fixed pll div2 >> + - description: input fixed pll div2p5 >> + - description: input fixed pll div3 >> + - description: input fixed pll div4 >> + - description: input fixed pll div5 >> + - description: input fixed pll div7 >> + - description: input hifi pll >> + - description: input gp0 pll >> + - description: input mpll0 >> + - description: input mpll1 >> + - description: input mpll2 >> + - description: input mpll3 >> + - description: input hdmi pll >> + - description: input oscillator (usually at 24MHz) >> + - description: input external 32kHz reference (optional) >> + >> + clock-names: >> + items: >> + - const: fclk_div2 >> + - const: fclk_div2p5 >> + - const: fclk_div3 >> + - const: fclk_div4 >> + - const: fclk_div5 >> + - const: fclk_div7 >> + - const: hifi_pll >> + - const: gp0_pll >> + - const: mpll0 >> + - const: mpll1 >> + - const: mpll2 >> + - const: mpll3 >> + - const: hdmi_pll >> + - const: xtal >> + - const: ext_32k >> + >> + "#clock-cells": >> + const: 1 >> + >> +required: >> + - compatible >> + - reg >> + - clocks >> + - clock-names >> + - "#clock-cells" >> + >> +additionalProperties: false >> + >> +examples: >> + - | >> + #include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> >> + >> + /* 32KHz reference crystal */ >> + ext_32k: ref32k { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <32000>; >> + }; >> + >> + clkc_periphs: clock-controller@fe000000 { >> + compatible = "amlogic,s4-peripherals-clkc"; >> + reg = <0xfe000000 0x49c>; >> + clocks = <&clkc_pll 3>, >> + <&clkc_pll 13>, >> + <&clkc_pll 5>, >> + <&clkc_pll 7>, >> + <&clkc_pll 9>, >> + <&clkc_pll 11>, >> + <&clkc_pll 17>, >> + <&clkc_pll 15>, >> + <&clkc_pll 25>, >> + <&clkc_pll 27>, >> + <&clkc_pll 29>, >> + <&clkc_pll 31>, >> + <&clkc_pll 20>, >> + <&xtal>, >> + <&ext_32k>; >> + clock-names = "fclk_div2", "fclk_div2p5", "fclk_div3", "fclk_div4", >> + "fclk_div5", "fclk_div7", "hifi_pll", "gp0_pll", >> + "mpll0", "mpll1", "mpll2", "mpll3", "hdmi_pll", "xtal", >> + "ext_32k"; >> + #clock-cells = <1>; >> + }; >> +... >> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig >> index a663c90a3f3b..a6eb9fa15c74 100644 >> --- a/drivers/clk/meson/Kconfig >> +++ b/drivers/clk/meson/Kconfig >> @@ -128,4 +128,16 @@ config COMMON_CLK_S4_PLL >> aka s4. Amlogic S805X2 and S905Y4 devices include AQ222 and AQ229. >> Say Y if you want the board to work, because plls are the parent of most >> peripherals. >> + >> +config COMMON_CLK_S4 >> + tristate "S4 SoC Peripherals clock controllers support" >> + depends on ARM64 >> + default y >> + select COMMON_CLK_MESON_REGMAP >> + select COMMON_CLK_MESON_DUALDIV >> + select COMMON_CLK_MESON_VID_PLL_DIV >> + help >> + Support for the Peripherals clock controller on Amlogic S805X2 and S905Y4 >> + devices, aka s4. Amlogic S805X2 and S905Y4 devices include AQ222 and AQ229. >> + Say Y if you want peripherals to work. >> endmenu >> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile >> index 376f49cc13f1..c9130afccb48 100644 >> --- a/drivers/clk/meson/Makefile >> +++ b/drivers/clk/meson/Makefile >> @@ -20,3 +20,4 @@ obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o >> obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o >> obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o >> obj-$(CONFIG_COMMON_CLK_S4_PLL) += s4-pll.o >> +obj-$(CONFIG_COMMON_CLK_S4) += s4-peripherals.o >> diff --git a/drivers/clk/meson/s4-peripherals.c b/drivers/clk/meson/s4-peripherals.c >> new file mode 100644 >> index 000000000000..8ce5156d3510 >> --- /dev/null >> +++ b/drivers/clk/meson/s4-peripherals.c >> @@ -0,0 +1,3783 @@ >> +// SPDX-License-Identifier: GPL-2.0+ >> +/* >> + * Amlogic Meson-S4 Peripherals Clock Controller Driver >> + * >> + * Copyright (c) 2021 Amlogic, inc. >> + * Author: Yu Tu <yu.tu@amlogic.com> >> + */ >> + >> +#include <linux/clk-provider.h> >> +#include <linux/of_device.h> >> +#include <linux/platform_device.h> >> + >> +#include "clk-regmap.h" >> +#include "vid-pll-div.h" >> +#include "clk-dualdiv.h" >> +#include "s4-peripherals.h" >> + >> +static struct clk_regmap s4_rtc_32k_by_oscin_clkin = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_RTC_BY_OSCIN_CTRL0, >> + .bit_idx = 31, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "rtc_32k_by_oscin_clkin", >> + .ops = &clk_regmap_gate_ops, >> + .parent_data = (const struct clk_parent_data []) { >> + { .fw_name = "xtal", } >> + }, >> + .num_parents = 1, >> + }, >> +}; >> + >> +static const struct meson_clk_dualdiv_param s4_32k_div_table[] = { >> + { >> + .dual = 1, >> + .n1 = 733, >> + .m1 = 8, >> + .n2 = 732, >> + .m2 = 11, >> + }, >> + {} >> +}; >> + >> +static struct clk_regmap s4_rtc_32k_by_oscin_div = { >> + .data = &(struct meson_clk_dualdiv_data){ >> + .n1 = { >> + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL0, >> + .shift = 0, >> + .width = 12, >> + }, >> + .n2 = { >> + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL0, >> + .shift = 12, >> + .width = 12, >> + }, >> + .m1 = { >> + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL1, >> + .shift = 0, >> + .width = 12, >> + }, >> + .m2 = { >> + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL1, >> + .shift = 12, >> + .width = 12, >> + }, >> + .dual = { >> + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL0, >> + .shift = 28, >> + .width = 1, >> + }, >> + .table = s4_32k_div_table, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "rtc_32k_by_oscin_div", >> + .ops = &meson_clk_dualdiv_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_rtc_32k_by_oscin_clkin.hw >> + }, >> + .num_parents = 1, >> + }, >> +}; >> + >> +static struct clk_regmap s4_rtc_32k_by_oscin_sel = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_RTC_BY_OSCIN_CTRL1, >> + .mask = 0x1, >> + .shift = 24, >> + .flags = CLK_MUX_ROUND_CLOSEST, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "rtc_32k_by_oscin_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_rtc_32k_by_oscin_div.hw, >> + &s4_rtc_32k_by_oscin_clkin.hw, >> + }, >> + .num_parents = 2, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_rtc_32k_by_oscin = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_RTC_BY_OSCIN_CTRL0, >> + .bit_idx = 30, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "rtc_32k_by_oscin", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_rtc_32k_by_oscin_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +/* >> + * This RTC clock can be supplied by an external 32KHz crystal oscillator. >> + * If it is used, it should be documented in using fw_name and documented in the >> + * Bindings. Not currently in use on this board, so skip it. >> + */ >> +static u32 rtc_clk_sel[] = { 0, 1 }; > > No reason to do that I'm going to change it to static u32 rtc_clk_sel[] = { 0, 1, 2 };. I don't know if that's okay with you? > >> +static const struct clk_parent_data rtc_clk_sel_parent_data[] = { >> + { .hw = &s4_rtc_32k_by_oscin.hw }, >> + { .hw = &s4_rtc_32k_by_oscin_div.hw }, >> + { .fw_name = "ext_32k", } >> +}; >> + >> +static struct clk_regmap s4_rtc_clk = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_RTC_CTRL, >> + .mask = 0x3, >> + .shift = 0, >> + .table = rtc_clk_sel, >> + .flags = CLK_MUX_ROUND_CLOSEST, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "rtc_clk_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = rtc_clk_sel_parent_data, >> + .num_parents = 2, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +/* The index 5 is AXI_CLK, which is dedicated to AXI. So skip it. */ >> +static u32 mux_table_sys_ab_clk_sel[] = { 0, 1, 2, 3, 4, 6, 7 }; >> +static const struct clk_parent_data sys_ab_clk_parent_data[] = { >> + { .fw_name = "xtal" }, >> + { .fw_name = "fclk_div2" }, >> + { .fw_name = "fclk_div3" }, >> + { .fw_name = "fclk_div4" }, >> + { .fw_name = "fclk_div5" }, >> + { .fw_name = "fclk_div7" }, >> + { .hw = &s4_rtc_clk.hw } >> +}; >> + >> +static struct clk_regmap s4_sysclk_b_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_SYS_CLK_CTRL0, >> + .mask = 0x7, >> + .shift = 26, >> + .table = mux_table_sys_ab_clk_sel, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "sysclk_b_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = sys_ab_clk_parent_data, >> + .num_parents = ARRAY_SIZE(sys_ab_clk_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_sysclk_b_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_SYS_CLK_CTRL0, >> + .shift = 16, >> + .width = 10, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "sysclk_b_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_sysclk_b_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_sysclk_b = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_SYS_CLK_CTRL0, >> + .bit_idx = 29, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "sysclk_b", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_sysclk_b_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_sysclk_a_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_SYS_CLK_CTRL0, >> + .mask = 0x7, >> + .shift = 10, >> + .table = mux_table_sys_ab_clk_sel, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "sysclk_a_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = sys_ab_clk_parent_data, >> + .num_parents = ARRAY_SIZE(sys_ab_clk_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_sysclk_a_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_SYS_CLK_CTRL0, >> + .shift = 0, >> + .width = 10, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "sysclk_a_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_sysclk_a_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_sysclk_a = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_SYS_CLK_CTRL0, >> + .bit_idx = 13, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "sysclk_a", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_sysclk_a_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_sys_clk = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_SYS_CLK_CTRL0, >> + .mask = 0x1, >> + .shift = 31, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "sys_clk", >> + .ops = &clk_regmap_mux_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_sysclk_a.hw, >> + &s4_sysclk_b.hw >> + }, >> + .num_parents = 2, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_ceca_32k_clkin = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_CECA_CTRL0, >> + .bit_idx = 31, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "ceca_32k_clkin", >> + .ops = &clk_regmap_gate_ops, >> + .parent_data = (const struct clk_parent_data []) { >> + { .fw_name = "xtal", } >> + }, >> + .num_parents = 1, >> + }, >> +}; >> + >> +static struct clk_regmap s4_ceca_32k_div = { >> + .data = &(struct meson_clk_dualdiv_data){ >> + .n1 = { >> + .reg_off = CLKCTRL_CECA_CTRL0, >> + .shift = 0, >> + .width = 12, >> + }, >> + .n2 = { >> + .reg_off = CLKCTRL_CECA_CTRL0, >> + .shift = 12, >> + .width = 12, >> + }, >> + .m1 = { >> + .reg_off = CLKCTRL_CECA_CTRL1, >> + .shift = 0, >> + .width = 12, >> + }, >> + .m2 = { >> + .reg_off = CLKCTRL_CECA_CTRL1, >> + .shift = 12, >> + .width = 12, >> + }, >> + .dual = { >> + .reg_off = CLKCTRL_CECA_CTRL0, >> + .shift = 28, >> + .width = 1, >> + }, >> + .table = s4_32k_div_table, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "ceca_32k_div", >> + .ops = &meson_clk_dualdiv_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_ceca_32k_clkin.hw >> + }, >> + .num_parents = 1, >> + }, >> +}; >> + >> +static struct clk_regmap s4_ceca_32k_sel_pre = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_CECA_CTRL1, >> + .mask = 0x1, >> + .shift = 24, >> + .flags = CLK_MUX_ROUND_CLOSEST, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "ceca_32k_sel_pre", >> + .ops = &clk_regmap_mux_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_ceca_32k_div.hw, >> + &s4_ceca_32k_clkin.hw >> + }, >> + .num_parents = 2, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_ceca_32k_sel = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_CECA_CTRL1, >> + .mask = 0x1, >> + .shift = 31, >> + .flags = CLK_MUX_ROUND_CLOSEST, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "ceca_32k_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_ceca_32k_sel_pre.hw, >> + &s4_rtc_clk.hw >> + }, >> + .num_parents = 2, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_ceca_32k_clkout = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_CECA_CTRL0, >> + .bit_idx = 30, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "ceca_32k_clkout", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_ceca_32k_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_cecb_32k_clkin = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_CECB_CTRL0, >> + .bit_idx = 31, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "cecb_32k_clkin", >> + .ops = &clk_regmap_gate_ops, >> + .parent_data = (const struct clk_parent_data []) { >> + { .fw_name = "xtal", } >> + }, >> + .num_parents = 1, >> + }, >> +}; >> + >> +static struct clk_regmap s4_cecb_32k_div = { >> + .data = &(struct meson_clk_dualdiv_data){ >> + .n1 = { >> + .reg_off = CLKCTRL_CECB_CTRL0, >> + .shift = 0, >> + .width = 12, >> + }, >> + .n2 = { >> + .reg_off = CLKCTRL_CECB_CTRL0, >> + .shift = 12, >> + .width = 12, >> + }, >> + .m1 = { >> + .reg_off = CLKCTRL_CECB_CTRL1, >> + .shift = 0, >> + .width = 12, >> + }, >> + .m2 = { >> + .reg_off = CLKCTRL_CECB_CTRL1, >> + .shift = 12, >> + .width = 12, >> + }, >> + .dual = { >> + .reg_off = CLKCTRL_CECB_CTRL0, >> + .shift = 28, >> + .width = 1, >> + }, >> + .table = s4_32k_div_table, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "cecb_32k_div", >> + .ops = &meson_clk_dualdiv_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_cecb_32k_clkin.hw >> + }, >> + .num_parents = 1, >> + }, >> +}; >> + >> +static struct clk_regmap s4_cecb_32k_sel_pre = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_CECB_CTRL1, >> + .mask = 0x1, >> + .shift = 24, >> + .flags = CLK_MUX_ROUND_CLOSEST, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "cecb_32k_sel_pre", >> + .ops = &clk_regmap_mux_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_cecb_32k_div.hw, >> + &s4_cecb_32k_clkin.hw >> + }, >> + .num_parents = 2, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_cecb_32k_sel = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_CECB_CTRL1, >> + .mask = 0x1, >> + .shift = 31, >> + .flags = CLK_MUX_ROUND_CLOSEST, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "cecb_32k_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_cecb_32k_sel_pre.hw, >> + &s4_rtc_clk.hw >> + }, >> + .num_parents = 2, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_cecb_32k_clkout = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_CECB_CTRL0, >> + .bit_idx = 30, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "cecb_32k_clkout", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_cecb_32k_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static const struct clk_parent_data s4_sc_parent_data[] = { >> + { .fw_name = "fclk_div4" }, >> + { .fw_name = "fclk_div3" }, >> + { .fw_name = "fclk_div5" }, >> + { .fw_name = "xtal", } >> +}; >> + >> +static struct clk_regmap s4_sc_clk_mux = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_SC_CLK_CTRL, >> + .mask = 0x3, >> + .shift = 9, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "sc_clk_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_sc_parent_data, >> + .num_parents = ARRAY_SIZE(s4_sc_parent_data), >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_sc_clk_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_SC_CLK_CTRL, >> + .shift = 0, >> + .width = 8, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "sc_clk_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_sc_clk_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_sc_clk_gate = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_SC_CLK_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "sc_clk_gate", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_sc_clk_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_12_24M_clk_gate = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_CLK12_24_CTRL, >> + .bit_idx = 11, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "12_24m_gate", >> + .ops = &clk_regmap_gate_ops, >> + .parent_data = (const struct clk_parent_data []) { >> + { .fw_name = "xtal", } >> + }, >> + .num_parents = 1, >> + }, >> +}; >> + >> +static struct clk_fixed_factor s4_12M_clk_div = { >> + .mult = 1, >> + .div = 2, >> + .hw.init = &(struct clk_init_data){ >> + .name = "12M", >> + .ops = &clk_fixed_factor_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_12_24M_clk_gate.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_12_24M_clk = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_CLK12_24_CTRL, >> + .mask = 0x1, >> + .shift = 10, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "12_24m", >> + .ops = &clk_regmap_mux_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_12_24M_clk_gate.hw, >> + &s4_12M_clk_div.hw, >> + }, >> + .num_parents = 2, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +/* Video Clocks */ >> +static struct clk_regmap s4_vid_pll_div = { >> + .data = &(struct meson_vid_pll_div_data){ >> + .val = { >> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV, >> + .shift = 0, >> + .width = 15, >> + }, >> + .sel = { >> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV, >> + .shift = 16, >> + .width = 2, >> + }, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vid_pll_div", >> + /* Same to g12a */ >> + .ops = &meson_vid_pll_div_ro_ops, > > Please add an helpful explanation. > > 'Same to g12a' is not helpful. > "Because the vid_pll_div clock is a clock that does not need to change the divisor, ops only provides meson_vid_pll_div_ro_ops." I wonder if this description is ok for you? >> + .parent_data = (const struct clk_parent_data []) { >> + { .fw_name = "hdmi_pll", } >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vid_pll_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VID_PLL_CLK_DIV, >> + .mask = 0x1, >> + .shift = 18, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vid_pll_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = (const struct clk_parent_data []) { >> + { .hw = &s4_vid_pll_div.hw }, >> + { .fw_name = "hdmi_pll", } >> + }, >> + .num_parents = 2, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vid_pll = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VID_PLL_CLK_DIV, >> + .bit_idx = 19, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vid_pll", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vid_pll_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static const struct clk_parent_data s4_vclk_parent_data[] = { >> + { .hw = &s4_vid_pll.hw }, >> + { .fw_name = "gp0_pll", }, >> + { .fw_name = "hifi_pll", }, >> + { .fw_name = "mpll1", }, >> + { .fw_name = "fclk_div3", }, >> + { .fw_name = "fclk_div4", }, >> + { .fw_name = "fclk_div5", }, >> + { .fw_name = "fclk_div7", }, >> +}; >> + >> +static struct clk_regmap s4_vclk_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VID_CLK_CTRL, >> + .mask = 0x7, >> + .shift = 16, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vclk_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_vclk_parent_data, >> + .num_parents = ARRAY_SIZE(s4_vclk_parent_data), >> + }, > > You are stopping rate propagation here. > It deserves an explanation. Same goes below. "When the driver uses this clock, needs to specify the patent clock he wants in the dts." Is ok for you? > >> +}; >> + >> +static struct clk_regmap s4_vclk2_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VIID_CLK_CTRL, >> + .mask = 0x7, >> + .shift = 16, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vclk2_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_vclk_parent_data, >> + .num_parents = ARRAY_SIZE(s4_vclk_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_vclk_input = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VID_CLK_DIV, >> + .bit_idx = 16, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vclk_input", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vclk_sel.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vclk2_input = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VIID_CLK_DIV, >> + .bit_idx = 16, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vclk2_input", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2_sel.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vclk_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_VID_CLK_DIV, >> + .shift = 0, >> + .width = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vclk_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vclk_input.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vclk2_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_VIID_CLK_DIV, >> + .shift = 0, >> + .width = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vclk2_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vclk2_input.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vclk = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VID_CLK_CTRL, >> + .bit_idx = 19, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vclk", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vclk_div.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vclk2 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VIID_CLK_CTRL, >> + .bit_idx = 19, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vclk2", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2_div.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vclk_div1 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VID_CLK_CTRL, >> + .bit_idx = 0, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vclk_div1", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vclk_div2_en = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VID_CLK_CTRL, >> + .bit_idx = 1, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vclk_div2_en", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vclk_div4_en = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VID_CLK_CTRL, >> + .bit_idx = 2, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vclk_div4_en", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vclk_div6_en = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VID_CLK_CTRL, >> + .bit_idx = 3, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vclk_div6_en", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vclk_div12_en = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VID_CLK_CTRL, >> + .bit_idx = 4, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vclk_div12_en", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vclk2_div1 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VIID_CLK_CTRL, >> + .bit_idx = 0, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vclk2_div1", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vclk2_div2_en = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VIID_CLK_CTRL, >> + .bit_idx = 1, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vclk2_div2_en", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vclk2_div4_en = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VIID_CLK_CTRL, >> + .bit_idx = 2, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vclk2_div4_en", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vclk2_div6_en = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VIID_CLK_CTRL, >> + .bit_idx = 3, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vclk2_div6_en", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vclk2_div12_en = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VIID_CLK_CTRL, >> + .bit_idx = 4, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vclk2_div12_en", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_fixed_factor s4_vclk_div2 = { >> + .mult = 1, >> + .div = 2, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vclk_div2", >> + .ops = &clk_fixed_factor_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vclk_div2_en.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_fixed_factor s4_vclk_div4 = { >> + .mult = 1, >> + .div = 4, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vclk_div4", >> + .ops = &clk_fixed_factor_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vclk_div4_en.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_fixed_factor s4_vclk_div6 = { >> + .mult = 1, >> + .div = 6, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vclk_div6", >> + .ops = &clk_fixed_factor_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vclk_div6_en.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_fixed_factor s4_vclk_div12 = { >> + .mult = 1, >> + .div = 12, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vclk_div12", >> + .ops = &clk_fixed_factor_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vclk_div12_en.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_fixed_factor s4_vclk2_div2 = { >> + .mult = 1, >> + .div = 2, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vclk2_div2", >> + .ops = &clk_fixed_factor_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vclk2_div2_en.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_fixed_factor s4_vclk2_div4 = { >> + .mult = 1, >> + .div = 4, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vclk2_div4", >> + .ops = &clk_fixed_factor_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vclk2_div4_en.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_fixed_factor s4_vclk2_div6 = { >> + .mult = 1, >> + .div = 6, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vclk2_div6", >> + .ops = &clk_fixed_factor_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vclk2_div6_en.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_fixed_factor s4_vclk2_div12 = { >> + .mult = 1, >> + .div = 12, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vclk2_div12", >> + .ops = &clk_fixed_factor_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vclk2_div12_en.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +/* The 5,6,7 indexes corresponds to no real clock, so there are not used. */ >> +static u32 mux_table_cts_sel[] = { 0, 1, 2, 3, 4, 8, 9, 10, 11, 12 }; >> +static const struct clk_hw *s4_cts_parent_hws[] = { >> + &s4_vclk_div1.hw, >> + &s4_vclk_div2.hw, >> + &s4_vclk_div4.hw, >> + &s4_vclk_div6.hw, >> + &s4_vclk_div12.hw, >> + &s4_vclk2_div1.hw, >> + &s4_vclk2_div2.hw, >> + &s4_vclk2_div4.hw, >> + &s4_vclk2_div6.hw, >> + &s4_vclk2_div12.hw >> +}; >> + >> +static struct clk_regmap s4_cts_enci_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VID_CLK_DIV, >> + .mask = 0xf, >> + .shift = 28, >> + .table = mux_table_cts_sel, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "cts_enci_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_hws = s4_cts_parent_hws, >> + .num_parents = ARRAY_SIZE(s4_cts_parent_hws), >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_cts_encp_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VID_CLK_DIV, >> + .mask = 0xf, >> + .shift = 20, >> + .table = mux_table_cts_sel, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "cts_encp_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_hws = s4_cts_parent_hws, >> + .num_parents = ARRAY_SIZE(s4_cts_parent_hws), >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_cts_vdac_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VIID_CLK_DIV, >> + .mask = 0xf, >> + .shift = 28, >> + .table = mux_table_cts_sel, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "cts_vdac_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_hws = s4_cts_parent_hws, >> + .num_parents = ARRAY_SIZE(s4_cts_parent_hws), >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +/* The 5,6,7 indexes corresponds to no real clock, so there are not used. */ >> +static u32 mux_table_hdmi_tx_sel[] = { 0, 1, 2, 3, 4, 8, 9, 10, 11, 12 }; >> +static const struct clk_hw *s4_cts_hdmi_tx_parent_hws[] = { >> + &s4_vclk_div1.hw, >> + &s4_vclk_div2.hw, >> + &s4_vclk_div4.hw, >> + &s4_vclk_div6.hw, >> + &s4_vclk_div12.hw, >> + &s4_vclk2_div1.hw, >> + &s4_vclk2_div2.hw, >> + &s4_vclk2_div4.hw, >> + &s4_vclk2_div6.hw, >> + &s4_vclk2_div12.hw >> +}; >> + >> +static struct clk_regmap s4_hdmi_tx_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_HDMI_CLK_CTRL, >> + .mask = 0xf, >> + .shift = 16, >> + .table = mux_table_hdmi_tx_sel, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "hdmi_tx_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_hws = s4_cts_hdmi_tx_parent_hws, >> + .num_parents = ARRAY_SIZE(s4_cts_hdmi_tx_parent_hws), >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_cts_enci = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VID_CLK_CTRL2, >> + .bit_idx = 0, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "cts_enci", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_cts_enci_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_cts_encp = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VID_CLK_CTRL2, >> + .bit_idx = 2, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "cts_encp", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_cts_encp_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_cts_vdac = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VID_CLK_CTRL2, >> + .bit_idx = 4, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "cts_vdac", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_cts_vdac_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_hdmi_tx = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VID_CLK_CTRL2, >> + .bit_idx = 5, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "hdmi_tx", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_hdmi_tx_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +/* HDMI Clocks */ >> +static const struct clk_parent_data s4_hdmi_parent_data[] = { >> + { .fw_name = "xtal", }, >> + { .fw_name = "fclk_div4", }, >> + { .fw_name = "fclk_div3", }, >> + { .fw_name = "fclk_div5", } >> +}; >> + >> +static struct clk_regmap s4_hdmi_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_HDMI_CLK_CTRL, >> + .mask = 0x3, >> + .shift = 9, >> + .flags = CLK_MUX_ROUND_CLOSEST, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "hdmi_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_hdmi_parent_data, >> + .num_parents = ARRAY_SIZE(s4_hdmi_parent_data), >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_hdmi_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_HDMI_CLK_CTRL, >> + .shift = 0, >> + .width = 7, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "hdmi_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_hdmi_sel.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_hdmi = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_HDMI_CLK_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "hdmi", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_hdmi_div.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_ts_clk_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_TS_CLK_CTRL, >> + .shift = 0, >> + .width = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "ts_clk_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_data = &(const struct clk_parent_data) { >> + .fw_name = "xtal", >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_ts_clk_gate = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_TS_CLK_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "ts_clk", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_ts_clk_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +/* >> + * The MALI IP is clocked by two identical clocks (mali_0 and mali_1) >> + * muxed by a glitch-free switch. The CCF can manage this glitch-free >> + * mux because it does top-to-bottom updates the each clock tree and >> + * switches to the "inactive" one when CLK_SET_RATE_GATE is set. >> + */ >> +static const struct clk_parent_data s4_mali_0_1_parent_data[] = { >> + { .fw_name = "xtal", }, >> + { .fw_name = "gp0_pll", }, >> + { .fw_name = "hifi_pll", }, >> + { .fw_name = "fclk_div2p5", }, >> + { .fw_name = "fclk_div3", }, >> + { .fw_name = "fclk_div4", }, >> + { .fw_name = "fclk_div5", }, >> + { .fw_name = "fclk_div7", } >> +}; >> + >> +static struct clk_regmap s4_mali_0_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_MALI_CLK_CTRL, >> + .mask = 0x7, >> + .shift = 9, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "mali_0_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_mali_0_1_parent_data, >> + .num_parents = ARRAY_SIZE(s4_mali_0_1_parent_data), >> + /* >> + * Don't request the parent to change the rate because >> + * all GPU frequencies can be derived from the fclk_* >> + * clocks and one special GP0_PLL setting. This is >> + * important because we need the MPLL clocks for audio. >> + */ >> + .flags = 0, >> + }, >> +}; >> + >> +static struct clk_regmap s4_mali_0_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_MALI_CLK_CTRL, >> + .shift = 0, >> + .width = 7, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "mali_0_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_mali_0_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_mali_0 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_MALI_CLK_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "mali_0", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_mali_0_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_mali_1_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_MALI_CLK_CTRL, >> + .mask = 0x7, >> + .shift = 25, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "mali_1_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_mali_0_1_parent_data, >> + .num_parents = ARRAY_SIZE(s4_mali_0_1_parent_data), >> + .flags = 0, >> + }, >> +}; >> + >> +static struct clk_regmap s4_mali_1_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_MALI_CLK_CTRL, >> + .shift = 16, >> + .width = 7, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "mali_1_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_mali_1_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_mali_1 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_MALI_CLK_CTRL, >> + .bit_idx = 24, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "mali_1", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_mali_1_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static const struct clk_hw *s4_mali_parent_hws[] = { >> + &s4_mali_0.hw, >> + &s4_mali_1.hw >> +}; >> + >> +static struct clk_regmap s4_mali_mux = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_MALI_CLK_CTRL, >> + .mask = 1, >> + .shift = 31, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "mali", >> + .ops = &clk_regmap_mux_ops, >> + .parent_hws = s4_mali_parent_hws, >> + .num_parents = 2, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +/* VDEC clocks */ >> +static const struct clk_parent_data s4_dec_parent_data[] = { >> + { .fw_name = "fclk_div2p5", }, >> + { .fw_name = "fclk_div3", }, >> + { .fw_name = "fclk_div4", }, >> + { .fw_name = "fclk_div5", }, >> + { .fw_name = "fclk_div7", }, >> + { .fw_name = "hifi_pll", }, >> + { .fw_name = "gp0_pll", }, >> + { .fw_name = "xtal", } >> +}; >> + >> +static struct clk_regmap s4_vdec_p0_mux = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VDEC_CLK_CTRL, >> + .mask = 0x7, >> + .shift = 9, >> + .flags = CLK_MUX_ROUND_CLOSEST, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vdec_p0_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_dec_parent_data, >> + .num_parents = ARRAY_SIZE(s4_dec_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_vdec_p0_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_VDEC_CLK_CTRL, >> + .shift = 0, >> + .width = 7, >> + .flags = CLK_DIVIDER_ROUND_CLOSEST, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vdec_p0_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vdec_p0_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vdec_p0 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VDEC_CLK_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vdec_p0", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vdec_p0_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vdec_p1_mux = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VDEC3_CLK_CTRL, >> + .mask = 0x7, >> + .shift = 9, >> + .flags = CLK_MUX_ROUND_CLOSEST, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vdec_p1_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_dec_parent_data, >> + .num_parents = ARRAY_SIZE(s4_dec_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_vdec_p1_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_VDEC3_CLK_CTRL, >> + .shift = 0, >> + .width = 7, >> + .flags = CLK_DIVIDER_ROUND_CLOSEST, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vdec_p1_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vdec_p1_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vdec_p1 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VDEC3_CLK_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vdec_p1", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vdec_p1_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static const struct clk_hw *s4_vdec_mux_parent_hws[] = { >> + &s4_vdec_p0.hw, >> + &s4_vdec_p1.hw >> +}; >> + >> +static struct clk_regmap s4_vdec_mux = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VDEC3_CLK_CTRL, >> + .mask = 0x1, >> + .shift = 15, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vdec_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_hws = s4_vdec_mux_parent_hws, >> + .num_parents = ARRAY_SIZE(s4_vdec_mux_parent_hws), >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_hevcf_p0_mux = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VDEC2_CLK_CTRL, >> + .mask = 0x7, >> + .shift = 9, >> + .flags = CLK_MUX_ROUND_CLOSEST, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "hevcf_p0_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_dec_parent_data, >> + .num_parents = ARRAY_SIZE(s4_dec_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_hevcf_p0_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_VDEC2_CLK_CTRL, >> + .shift = 0, >> + .width = 7, >> + .flags = CLK_DIVIDER_ROUND_CLOSEST, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "hevcf_p0_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_hevcf_p0_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_hevcf_p0 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VDEC2_CLK_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "hevcf_p0_gate", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_hevcf_p0_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_hevcf_p1_mux = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VDEC4_CLK_CTRL, >> + .mask = 0x7, >> + .shift = 9, >> + .flags = CLK_MUX_ROUND_CLOSEST, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "hevcf_p1_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_dec_parent_data, >> + .num_parents = ARRAY_SIZE(s4_dec_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_hevcf_p1_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_VDEC4_CLK_CTRL, >> + .shift = 0, >> + .width = 7, >> + .flags = CLK_DIVIDER_ROUND_CLOSEST, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "hevcf_p1_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_hevcf_p1_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_hevcf_p1 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VDEC4_CLK_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "hevcf_p1", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_hevcf_p1_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static const struct clk_hw *s4_hevcf_mux_parent_hws[] = { >> + &s4_hevcf_p0.hw, >> + &s4_hevcf_p1.hw >> +}; >> + >> +static struct clk_regmap s4_hevcf_mux = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VDEC4_CLK_CTRL, >> + .mask = 0x1, >> + .shift = 15, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "hevcf", >> + .ops = &clk_regmap_mux_ops, >> + .parent_hws = s4_hevcf_mux_parent_hws, >> + .num_parents = ARRAY_SIZE(s4_hevcf_mux_parent_hws), >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +/* VPU Clock */ >> +static const struct clk_parent_data s4_vpu_parent_data[] = { >> + { .fw_name = "fclk_div3", }, >> + { .fw_name = "fclk_div4", }, >> + { .fw_name = "fclk_div5", }, >> + { .fw_name = "fclk_div7", }, >> + { .fw_name = "mpll1", }, >> + { .hw = &s4_vid_pll.hw }, >> + { .fw_name = "hifi_pll", }, >> + { .fw_name = "gp0_pll", }, >> +}; >> + >> +static struct clk_regmap s4_vpu_0_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VPU_CLK_CTRL, >> + .mask = 0x7, >> + .shift = 9, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vpu_0_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_vpu_parent_data, >> + .num_parents = ARRAY_SIZE(s4_vpu_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_vpu_0_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_VPU_CLK_CTRL, >> + .shift = 0, >> + .width = 7, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vpu_0_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vpu_0_sel.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vpu_0 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VPU_CLK_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vpu_0", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vpu_0_div.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vpu_1_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VPU_CLK_CTRL, >> + .mask = 0x7, >> + .shift = 25, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vpu_1_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_vpu_parent_data, >> + .num_parents = ARRAY_SIZE(s4_vpu_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_vpu_1_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_VPU_CLK_CTRL, >> + .shift = 16, >> + .width = 7, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vpu_1_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vpu_1_sel.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vpu_1 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VPU_CLK_CTRL, >> + .bit_idx = 24, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vpu_1", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vpu_1_div.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vpu = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VPU_CLK_CTRL, >> + .mask = 1, >> + .shift = 31, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vpu", >> + .ops = &clk_regmap_mux_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vpu_0.hw, >> + &s4_vpu_1.hw, >> + }, >> + .num_parents = 2, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static const struct clk_parent_data vpu_clkb_tmp_parent_data[] = { >> + { .hw = &s4_vpu.hw }, >> + { .fw_name = "fclk_div4", }, >> + { .fw_name = "fclk_div5", }, >> + { .fw_name = "fclk_div7", } >> +}; >> + >> +static struct clk_regmap s4_vpu_clkb_tmp_mux = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VPU_CLKB_CTRL, >> + .mask = 0x3, >> + .shift = 20, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vpu_clkb_tmp_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = vpu_clkb_tmp_parent_data, >> + .num_parents = ARRAY_SIZE(vpu_clkb_tmp_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_vpu_clkb_tmp_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_VPU_CLKB_CTRL, >> + .shift = 16, >> + .width = 4, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vpu_clkb_tmp_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vpu_clkb_tmp_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vpu_clkb_tmp = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VPU_CLKB_CTRL, >> + .bit_idx = 24, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vpu_clkb_tmp", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vpu_clkb_tmp_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vpu_clkb_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_VPU_CLKB_CTRL, >> + .shift = 0, >> + .width = 8, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vpu_clkb_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vpu_clkb_tmp.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vpu_clkb = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VPU_CLKB_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vpu_clkb", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vpu_clkb_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static const struct clk_parent_data s4_vpu_clkc_parent_data[] = { >> + { .fw_name = "fclk_div4", }, >> + { .fw_name = "fclk_div3", }, >> + { .fw_name = "fclk_div5", }, >> + { .fw_name = "fclk_div7", }, >> + { .fw_name = "mpll1", }, >> + { .hw = &s4_vid_pll.hw }, >> + { .fw_name = "mpll2", }, >> + { .fw_name = "gp0_pll", }, >> +}; >> + >> +static struct clk_regmap s4_vpu_clkc_p0_mux = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VPU_CLKC_CTRL, >> + .mask = 0x7, >> + .shift = 9, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vpu_clkc_p0_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_vpu_clkc_parent_data, >> + .num_parents = ARRAY_SIZE(s4_vpu_clkc_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_vpu_clkc_p0_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_VPU_CLKC_CTRL, >> + .shift = 0, >> + .width = 7, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vpu_clkc_p0_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vpu_clkc_p0_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vpu_clkc_p0 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VPU_CLKC_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vpu_clkc_p0", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vpu_clkc_p0_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vpu_clkc_p1_mux = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VPU_CLKC_CTRL, >> + .mask = 0x7, >> + .shift = 25, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vpu_clkc_p1_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_vpu_clkc_parent_data, >> + .num_parents = ARRAY_SIZE(s4_vpu_clkc_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_vpu_clkc_p1_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_VPU_CLKC_CTRL, >> + .shift = 16, >> + .width = 7, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vpu_clkc_p1_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vpu_clkc_p1_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vpu_clkc_p1 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VPU_CLKC_CTRL, >> + .bit_idx = 24, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vpu_clkc_p1", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vpu_clkc_p1_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static const struct clk_hw *s4_vpu_mux_parent_hws[] = { >> + &s4_vpu_clkc_p0.hw, >> + &s4_vpu_clkc_p1.hw >> +}; >> + >> +static struct clk_regmap s4_vpu_clkc_mux = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VPU_CLKC_CTRL, >> + .mask = 0x1, >> + .shift = 31, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vpu_clkc_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_hws = s4_vpu_mux_parent_hws, >> + .num_parents = ARRAY_SIZE(s4_vpu_mux_parent_hws), >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +/* VAPB Clock */ >> +static const struct clk_parent_data s4_vapb_parent_data[] = { >> + { .fw_name = "fclk_div4", }, >> + { .fw_name = "fclk_div3", }, >> + { .fw_name = "fclk_div5", }, >> + { .fw_name = "fclk_div7", }, >> + { .fw_name = "mpll1", }, >> + { .hw = &s4_vid_pll.hw }, >> + { .fw_name = "mpll2", }, >> + { .fw_name = "fclk_div2p5", }, >> +}; >> + >> +static struct clk_regmap s4_vapb_0_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VAPBCLK_CTRL, >> + .mask = 0x7, >> + .shift = 9, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vapb_0_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_vapb_parent_data, >> + .num_parents = ARRAY_SIZE(s4_vapb_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_vapb_0_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_VAPBCLK_CTRL, >> + .shift = 0, >> + .width = 7, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vapb_0_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vapb_0_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vapb_0 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VAPBCLK_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vapb_0", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vapb_0_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vapb_1_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VAPBCLK_CTRL, >> + .mask = 0x7, >> + .shift = 25, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vapb_1_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_vapb_parent_data, >> + .num_parents = ARRAY_SIZE(s4_vapb_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_vapb_1_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_VAPBCLK_CTRL, >> + .shift = 16, >> + .width = 7, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vapb_1_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vapb_1_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vapb_1 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VAPBCLK_CTRL, >> + .bit_idx = 24, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vapb_1", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vapb_1_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vapb = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VAPBCLK_CTRL, >> + .mask = 1, >> + .shift = 31, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vapb_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vapb_0.hw, >> + &s4_vapb_1.hw >> + }, >> + .num_parents = 2, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_ge2d_gate = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VAPBCLK_CTRL, >> + .bit_idx = 30, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "ge2d_clk", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vapb.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static const struct clk_parent_data s4_esmclk_parent_data[] = { >> + { .fw_name = "fclk_div7", }, >> + { .fw_name = "fclk_div4", }, >> + { .fw_name = "fclk_div3", }, >> + { .fw_name = "fclk_div5", }, >> +}; >> + >> +static struct clk_regmap s4_hdcp22_esmclk_mux = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_HDCP22_CTRL, >> + .mask = 0x3, >> + .shift = 9, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "hdcp22_esmclk_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_esmclk_parent_data, >> + .num_parents = ARRAY_SIZE(s4_esmclk_parent_data), >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_hdcp22_esmclk_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_HDCP22_CTRL, >> + .shift = 0, >> + .width = 7, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "hdcp22_esmclk_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_hdcp22_esmclk_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_hdcp22_esmclk_gate = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_HDCP22_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "hdcp22_esmclk_gate", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_hdcp22_esmclk_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static const struct clk_parent_data s4_skpclk_parent_data[] = { >> + { .fw_name = "xtal", }, >> + { .fw_name = "fclk_div4", }, >> + { .fw_name = "fclk_div3", }, >> + { .fw_name = "fclk_div5", }, >> +}; >> + >> +static struct clk_regmap s4_hdcp22_skpclk_mux = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_HDCP22_CTRL, >> + .mask = 0x3, >> + .shift = 25, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "hdcp22_skpclk_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_skpclk_parent_data, >> + .num_parents = ARRAY_SIZE(s4_skpclk_parent_data), >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_hdcp22_skpclk_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_HDCP22_CTRL, >> + .shift = 16, >> + .width = 7, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "hdcp22_skpclk_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_hdcp22_skpclk_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_hdcp22_skpclk_gate = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_HDCP22_CTRL, >> + .bit_idx = 24, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "hdcp22_skpclk_gate", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_hdcp22_skpclk_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static const struct clk_parent_data s4_vdin_parent_data[] = { >> + { .fw_name = "xtal", }, >> + { .fw_name = "fclk_div4", }, >> + { .fw_name = "fclk_div3", }, >> + { .fw_name = "fclk_div5", }, >> + { .hw = &s4_vid_pll.hw } >> +}; >> + >> +static struct clk_regmap s4_vdin_meas_mux = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VDIN_MEAS_CLK_CTRL, >> + .mask = 0x7, >> + .shift = 9, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vdin_meas_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_vdin_parent_data, >> + .num_parents = ARRAY_SIZE(s4_vdin_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_vdin_meas_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_VDIN_MEAS_CLK_CTRL, >> + .shift = 0, >> + .width = 7, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vdin_meas_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vdin_meas_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vdin_meas_gate = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VDIN_MEAS_CLK_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vdin_meas_gate", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vdin_meas_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +/* EMMC/NAND clock */ >> +static const struct clk_parent_data s4_sd_emmc_clk0_parent_data[] = { >> + { .fw_name = "xtal", }, >> + { .fw_name = "fclk_div2", }, >> + { .fw_name = "fclk_div3", }, >> + { .fw_name = "hifi_pll", }, >> + { .fw_name = "fclk_div2p5", }, >> + { .fw_name = "mpll2", }, >> + { .fw_name = "mpll3", }, >> + { .fw_name = "gp0_pll", }, >> +}; >> + >> +static struct clk_regmap s4_sd_emmc_c_clk0_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_NAND_CLK_CTRL, >> + .mask = 0x7, >> + .shift = 9, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "sd_emmc_c_clk0_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_sd_emmc_clk0_parent_data, >> + .num_parents = ARRAY_SIZE(s4_sd_emmc_clk0_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_sd_emmc_c_clk0_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_NAND_CLK_CTRL, >> + .shift = 0, >> + .width = 7, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "sd_emmc_c_clk0_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_sd_emmc_c_clk0_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_sd_emmc_c_clk0 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_NAND_CLK_CTRL, >> + .bit_idx = 7, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "sd_emmc_c_clk0", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_sd_emmc_c_clk0_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_sd_emmc_a_clk0_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, >> + .mask = 0x7, >> + .shift = 9, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "sd_emmc_a_clk0_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_sd_emmc_clk0_parent_data, >> + .num_parents = ARRAY_SIZE(s4_sd_emmc_clk0_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_sd_emmc_a_clk0_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, >> + .shift = 0, >> + .width = 7, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "sd_emmc_a_clk0_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_sd_emmc_a_clk0_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_sd_emmc_a_clk0 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, >> + .bit_idx = 7, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "sd_emmc_a_clk0", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_sd_emmc_a_clk0_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_sd_emmc_b_clk0_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, >> + .mask = 0x7, >> + .shift = 25, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "sd_emmc_b_clk0_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_sd_emmc_clk0_parent_data, >> + .num_parents = ARRAY_SIZE(s4_sd_emmc_clk0_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_sd_emmc_b_clk0_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, >> + .shift = 16, >> + .width = 7, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "sd_emmc_b_clk0_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_sd_emmc_b_clk0_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_sd_emmc_b_clk0 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, >> + .bit_idx = 23, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "sd_emmc_b_clk0", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_sd_emmc_b_clk0_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +/* SPICC Clock */ >> +static const struct clk_parent_data s4_spicc_parent_data[] = { >> + { .fw_name = "xtal", }, >> + { .hw = &s4_sys_clk.hw }, >> + { .fw_name = "fclk_div4", }, >> + { .fw_name = "fclk_div3", }, >> + { .fw_name = "fclk_div2", }, >> + { .fw_name = "fclk_div5", }, >> + { .fw_name = "fclk_div7", }, >> +}; >> + >> +static struct clk_regmap s4_spicc0_mux = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_SPICC_CLK_CTRL, >> + .mask = 0x7, >> + .shift = 7, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "spicc0_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_spicc_parent_data, >> + .num_parents = ARRAY_SIZE(s4_spicc_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_spicc0_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_SPICC_CLK_CTRL, >> + .shift = 0, >> + .width = 6, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "spicc0_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_spicc0_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_spicc0_gate = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_SPICC_CLK_CTRL, >> + .bit_idx = 6, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "spicc0", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_spicc0_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +/* PWM Clock */ >> +static const struct clk_parent_data s4_pwm_parent_data[] = { >> + { .fw_name = "xtal", }, >> + { .hw = &s4_vid_pll.hw }, >> + { .fw_name = "fclk_div4", }, >> + { .fw_name = "fclk_div3", }, >> +}; >> + >> +static struct clk_regmap s4_pwm_a_mux = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_PWM_CLK_AB_CTRL, >> + .mask = 0x3, >> + .shift = 9, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_a_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_pwm_parent_data, >> + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_a_div = { >> + .data = &(struct clk_regmap_div_data) { >> + .offset = CLKCTRL_PWM_CLK_AB_CTRL, >> + .shift = 0, >> + .width = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_a_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_a_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_a_gate = { >> + .data = &(struct clk_regmap_gate_data) { >> + .offset = CLKCTRL_PWM_CLK_AB_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_a_gate", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_a_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_b_mux = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_PWM_CLK_AB_CTRL, >> + .mask = 0x3, >> + .shift = 25, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_b_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_pwm_parent_data, >> + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_b_div = { >> + .data = &(struct clk_regmap_div_data) { >> + .offset = CLKCTRL_PWM_CLK_AB_CTRL, >> + .shift = 16, >> + .width = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_b_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_b_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_b_gate = { >> + .data = &(struct clk_regmap_gate_data) { >> + .offset = CLKCTRL_PWM_CLK_AB_CTRL, >> + .bit_idx = 24, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_b_gate", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_b_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_c_mux = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_PWM_CLK_CD_CTRL, >> + .mask = 0x3, >> + .shift = 9, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_c_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_pwm_parent_data, >> + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_c_div = { >> + .data = &(struct clk_regmap_div_data) { >> + .offset = CLKCTRL_PWM_CLK_CD_CTRL, >> + .shift = 0, >> + .width = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_c_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_c_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_c_gate = { >> + .data = &(struct clk_regmap_gate_data) { >> + .offset = CLKCTRL_PWM_CLK_CD_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_c_gate", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_c_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_d_mux = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_PWM_CLK_CD_CTRL, >> + .mask = 0x3, >> + .shift = 25, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_d_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_pwm_parent_data, >> + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_d_div = { >> + .data = &(struct clk_regmap_div_data) { >> + .offset = CLKCTRL_PWM_CLK_CD_CTRL, >> + .shift = 16, >> + .width = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_d_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_d_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_d_gate = { >> + .data = &(struct clk_regmap_gate_data) { >> + .offset = CLKCTRL_PWM_CLK_CD_CTRL, >> + .bit_idx = 24, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_d_gate", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_d_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_e_mux = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_PWM_CLK_EF_CTRL, >> + .mask = 0x3, >> + .shift = 9, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_e_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_pwm_parent_data, >> + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_e_div = { >> + .data = &(struct clk_regmap_div_data) { >> + .offset = CLKCTRL_PWM_CLK_EF_CTRL, >> + .shift = 0, >> + .width = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_e_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_e_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_e_gate = { >> + .data = &(struct clk_regmap_gate_data) { >> + .offset = CLKCTRL_PWM_CLK_EF_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_e_gate", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_e_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_f_mux = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_PWM_CLK_EF_CTRL, >> + .mask = 0x3, >> + .shift = 25, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_f_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_pwm_parent_data, >> + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_f_div = { >> + .data = &(struct clk_regmap_div_data) { >> + .offset = CLKCTRL_PWM_CLK_EF_CTRL, >> + .shift = 16, >> + .width = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_f_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_f_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_f_gate = { >> + .data = &(struct clk_regmap_gate_data) { >> + .offset = CLKCTRL_PWM_CLK_EF_CTRL, >> + .bit_idx = 24, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_f_gate", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_f_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_g_mux = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_PWM_CLK_GH_CTRL, >> + .mask = 0x3, >> + .shift = 9, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_g_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_pwm_parent_data, >> + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_g_div = { >> + .data = &(struct clk_regmap_div_data) { >> + .offset = CLKCTRL_PWM_CLK_GH_CTRL, >> + .shift = 0, >> + .width = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_g_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_g_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_g_gate = { >> + .data = &(struct clk_regmap_gate_data) { >> + .offset = CLKCTRL_PWM_CLK_GH_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_g_gate", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_g_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_h_mux = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_PWM_CLK_GH_CTRL, >> + .mask = 0x3, >> + .shift = 25, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_h_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_pwm_parent_data, >> + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_h_div = { >> + .data = &(struct clk_regmap_div_data) { >> + .offset = CLKCTRL_PWM_CLK_GH_CTRL, >> + .shift = 16, >> + .width = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_h_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_h_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_h_gate = { >> + .data = &(struct clk_regmap_gate_data) { >> + .offset = CLKCTRL_PWM_CLK_GH_CTRL, >> + .bit_idx = 24, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_h_gate", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_h_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_i_mux = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, >> + .mask = 0x3, >> + .shift = 9, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_i_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_pwm_parent_data, >> + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_i_div = { >> + .data = &(struct clk_regmap_div_data) { >> + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, >> + .shift = 0, >> + .width = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_i_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_i_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_i_gate = { >> + .data = &(struct clk_regmap_gate_data) { >> + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_i_gate", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_i_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_j_mux = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, >> + .mask = 0x3, >> + .shift = 25, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_j_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_pwm_parent_data, >> + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_j_div = { >> + .data = &(struct clk_regmap_div_data) { >> + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, >> + .shift = 16, >> + .width = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_j_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_h_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_j_gate = { >> + .data = &(struct clk_regmap_gate_data) { >> + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, >> + .bit_idx = 24, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_j_gate", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_j_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_saradc_mux = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_SAR_CLK_CTRL, >> + .mask = 0x3, >> + .shift = 9, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "saradc_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = (const struct clk_parent_data []) { >> + { .fw_name = "xtal", }, >> + { .hw = &s4_sys_clk.hw }, >> + }, >> + .num_parents = 2, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_saradc_div = { >> + .data = &(struct clk_regmap_div_data) { >> + .offset = CLKCTRL_SAR_CLK_CTRL, >> + .shift = 0, >> + .width = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "saradc_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_saradc_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_saradc_gate = { >> + .data = &(struct clk_regmap_gate_data) { >> + .offset = CLKCTRL_SAR_CLK_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "saradc_clk", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_saradc_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +/* >> + * gen clk is designed for debug/monitor some internal clock quality. Some of the >> + * corresponding clock sources are not described in the clock tree and internal clock >> + * for debug, so they are skipped. >> + */ >> +static u32 s4_gen_clk_mux_table[] = { 0, 4, 5, 7, 19, 21, 22, >> + 23, 24, 25, 26, 27, 28 }; >> +static const struct clk_parent_data s4_gen_clk_parent_data[] = { >> + { .fw_name = "xtal", }, >> + { .hw = &s4_vid_pll.hw }, >> + { .fw_name = "gp0_pll", }, >> + { .fw_name = "hifi_pll", }, >> + { .fw_name = "fclk_div2", }, >> + { .fw_name = "fclk_div3", }, >> + { .fw_name = "fclk_div4", }, >> + { .fw_name = "fclk_div5", }, >> + { .fw_name = "fclk_div7", }, >> + { .fw_name = "mpll0", }, >> + { .fw_name = "mpll1", }, >> + { .fw_name = "mpll2", }, >> + { .fw_name = "mpll3", }, >> +}; >> + >> +static struct clk_regmap s4_gen_clk_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_GEN_CLK_CTRL, >> + .mask = 0x1f, >> + .shift = 12, >> + .table = s4_gen_clk_mux_table, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "gen_clk_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_gen_clk_parent_data, >> + .num_parents = ARRAY_SIZE(s4_gen_clk_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_gen_clk_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_GEN_CLK_CTRL, >> + .shift = 0, >> + .width = 11, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "gen_clk_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_gen_clk_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_gen_clk = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_GEN_CLK_CTRL, >> + .bit_idx = 11, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "gen_clk", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_gen_clk_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE, >> + }, >> +}; >> + >> +static const struct clk_parent_data s4_adc_extclk_in_parent_data[] = { >> + { .fw_name = "xtal", }, >> + { .fw_name = "fclk_div4", }, >> + { .fw_name = "fclk_div3", }, >> + { .fw_name = "fclk_div5", }, >> + { .fw_name = "fclk_div7", }, >> + { .fw_name = "mpll2", }, >> + { .fw_name = "gp0_pll", }, >> + { .fw_name = "hifi_pll", }, >> +}; >> + >> +static struct clk_regmap s4_adc_extclk_in_mux = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_DEMOD_CLK_CTRL, >> + .mask = 0x7, >> + .shift = 25, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "adc_extclk_in_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_adc_extclk_in_parent_data, >> + .num_parents = ARRAY_SIZE(s4_adc_extclk_in_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_adc_extclk_in_div = { >> + .data = &(struct clk_regmap_div_data) { >> + .offset = CLKCTRL_DEMOD_CLK_CTRL, >> + .shift = 16, >> + .width = 7, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "adc_extclk_in_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_adc_extclk_in_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_adc_extclk_in_gate = { >> + .data = &(struct clk_regmap_gate_data) { >> + .offset = CLKCTRL_DEMOD_CLK_CTRL, >> + .bit_idx = 24, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "adc_extclk_in", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_adc_extclk_in_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_demod_core_clk_mux = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_DEMOD_CLK_CTRL, >> + .mask = 0x3, >> + .shift = 9, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "demod_core_clk_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = (const struct clk_parent_data []) { >> + { .fw_name = "xtal", }, >> + { .fw_name = "fclk_div7", }, >> + { .fw_name = "fclk_div4", }, >> + { .hw = &s4_adc_extclk_in_gate.hw } >> + }, >> + .num_parents = 4, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_demod_core_clk_div = { >> + .data = &(struct clk_regmap_div_data) { >> + .offset = CLKCTRL_DEMOD_CLK_CTRL, >> + .shift = 0, >> + .width = 7, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "demod_core_clk_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_demod_core_clk_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_demod_core_clk_gate = { >> + .data = &(struct clk_regmap_gate_data) { >> + .offset = CLKCTRL_DEMOD_CLK_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "demod_core_clk", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_demod_core_clk_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +#define MESON_GATE(_name, _reg, _bit) \ >> + MESON_PCLK(_name, _reg, _bit, &s4_sys_clk.hw) >> + >> +static MESON_GATE(s4_ddr, CLKCTRL_SYS_CLK_EN0_REG0, 0); >> +static MESON_GATE(s4_dos, CLKCTRL_SYS_CLK_EN0_REG0, 1); >> +static MESON_GATE(s4_ethphy, CLKCTRL_SYS_CLK_EN0_REG0, 4); >> +static MESON_GATE(s4_mali, CLKCTRL_SYS_CLK_EN0_REG0, 6); >> +static MESON_GATE(s4_aocpu, CLKCTRL_SYS_CLK_EN0_REG0, 13); >> +static MESON_GATE(s4_aucpu, CLKCTRL_SYS_CLK_EN0_REG0, 14); >> +static MESON_GATE(s4_cec, CLKCTRL_SYS_CLK_EN0_REG0, 16); >> +static MESON_GATE(s4_sdemmca, CLKCTRL_SYS_CLK_EN0_REG0, 24); >> +static MESON_GATE(s4_sdemmcb, CLKCTRL_SYS_CLK_EN0_REG0, 25); >> +static MESON_GATE(s4_nand, CLKCTRL_SYS_CLK_EN0_REG0, 26); >> +static MESON_GATE(s4_smartcard, CLKCTRL_SYS_CLK_EN0_REG0, 27); >> +static MESON_GATE(s4_acodec, CLKCTRL_SYS_CLK_EN0_REG0, 28); >> +static MESON_GATE(s4_spifc, CLKCTRL_SYS_CLK_EN0_REG0, 29); >> +static MESON_GATE(s4_msr_clk, CLKCTRL_SYS_CLK_EN0_REG0, 30); >> +static MESON_GATE(s4_ir_ctrl, CLKCTRL_SYS_CLK_EN0_REG0, 31); >> +static MESON_GATE(s4_audio, CLKCTRL_SYS_CLK_EN0_REG1, 0); >> +static MESON_GATE(s4_eth, CLKCTRL_SYS_CLK_EN0_REG1, 3); >> +static MESON_GATE(s4_uart_a, CLKCTRL_SYS_CLK_EN0_REG1, 5); >> +static MESON_GATE(s4_uart_b, CLKCTRL_SYS_CLK_EN0_REG1, 6); >> +static MESON_GATE(s4_uart_c, CLKCTRL_SYS_CLK_EN0_REG1, 7); >> +static MESON_GATE(s4_uart_d, CLKCTRL_SYS_CLK_EN0_REG1, 8); >> +static MESON_GATE(s4_uart_e, CLKCTRL_SYS_CLK_EN0_REG1, 9); >> +static MESON_GATE(s4_aififo, CLKCTRL_SYS_CLK_EN0_REG1, 11); >> +static MESON_GATE(s4_ts_ddr, CLKCTRL_SYS_CLK_EN0_REG1, 15); >> +static MESON_GATE(s4_ts_pll, CLKCTRL_SYS_CLK_EN0_REG1, 16); >> +static MESON_GATE(s4_g2d, CLKCTRL_SYS_CLK_EN0_REG1, 20); >> +static MESON_GATE(s4_spicc0, CLKCTRL_SYS_CLK_EN0_REG1, 21); >> +static MESON_GATE(s4_usb, CLKCTRL_SYS_CLK_EN0_REG1, 26); >> +static MESON_GATE(s4_i2c_m_a, CLKCTRL_SYS_CLK_EN0_REG1, 30); >> +static MESON_GATE(s4_i2c_m_b, CLKCTRL_SYS_CLK_EN0_REG1, 31); >> +static MESON_GATE(s4_i2c_m_c, CLKCTRL_SYS_CLK_EN0_REG2, 0); >> +static MESON_GATE(s4_i2c_m_d, CLKCTRL_SYS_CLK_EN0_REG2, 1); >> +static MESON_GATE(s4_i2c_m_e, CLKCTRL_SYS_CLK_EN0_REG2, 2); >> +static MESON_GATE(s4_hdmitx_apb, CLKCTRL_SYS_CLK_EN0_REG2, 4); >> +static MESON_GATE(s4_i2c_s_a, CLKCTRL_SYS_CLK_EN0_REG2, 5); >> +static MESON_GATE(s4_usb1_to_ddr, CLKCTRL_SYS_CLK_EN0_REG2, 8); >> +static MESON_GATE(s4_hdcp22, CLKCTRL_SYS_CLK_EN0_REG2, 10); >> +static MESON_GATE(s4_mmc_apb, CLKCTRL_SYS_CLK_EN0_REG2, 11); >> +static MESON_GATE(s4_rsa, CLKCTRL_SYS_CLK_EN0_REG2, 18); >> +static MESON_GATE(s4_cpu_debug, CLKCTRL_SYS_CLK_EN0_REG2, 19); >> +static MESON_GATE(s4_vpu_intr, CLKCTRL_SYS_CLK_EN0_REG2, 25); >> +static MESON_GATE(s4_demod, CLKCTRL_SYS_CLK_EN0_REG2, 27); >> +static MESON_GATE(s4_sar_adc, CLKCTRL_SYS_CLK_EN0_REG2, 28); >> +static MESON_GATE(s4_gic, CLKCTRL_SYS_CLK_EN0_REG2, 30); >> +static MESON_GATE(s4_pwm_ab, CLKCTRL_SYS_CLK_EN0_REG3, 7); >> +static MESON_GATE(s4_pwm_cd, CLKCTRL_SYS_CLK_EN0_REG3, 8); >> +static MESON_GATE(s4_pwm_ef, CLKCTRL_SYS_CLK_EN0_REG3, 9); >> +static MESON_GATE(s4_pwm_gh, CLKCTRL_SYS_CLK_EN0_REG3, 10); >> +static MESON_GATE(s4_pwm_ij, CLKCTRL_SYS_CLK_EN0_REG3, 11); >> + >> +/* Array of all clocks provided by this provider */ >> +static struct clk_hw_onecell_data s4_periphs_hw_onecell_data = { >> + .hws = { >> + [CLKID_RTC_32K_CLKIN] = &s4_rtc_32k_by_oscin_clkin.hw, >> + [CLKID_RTC_32K_DIV] = &s4_rtc_32k_by_oscin_div.hw, >> + [CLKID_RTC_32K_SEL] = &s4_rtc_32k_by_oscin_sel.hw, >> + [CLKID_RTC_32K_XATL] = &s4_rtc_32k_by_oscin.hw, >> + [CLKID_RTC_CLK] = &s4_rtc_clk.hw, >> + [CLKID_SYS_CLK_B_SEL] = &s4_sysclk_b_sel.hw, >> + [CLKID_SYS_CLK_B_DIV] = &s4_sysclk_b_div.hw, >> + [CLKID_SYS_CLK_B_GATE] = &s4_sysclk_b.hw, >> + [CLKID_SYS_CLK_A_SEL] = &s4_sysclk_a_sel.hw, >> + [CLKID_SYS_CLK_A_DIV] = &s4_sysclk_a_div.hw, >> + [CLKID_SYS_CLK_A_GATE] = &s4_sysclk_a.hw, >> + [CLKID_SYS_CLK] = &s4_sys_clk.hw, >> + [CLKID_CECA_32K_CLKIN] = &s4_ceca_32k_clkin.hw, >> + [CLKID_CECA_32K_DIV] = &s4_ceca_32k_div.hw, >> + [CLKID_CECA_32K_SEL_PRE] = &s4_ceca_32k_sel_pre.hw, >> + [CLKID_CECA_32K_SEL] = &s4_ceca_32k_sel.hw, >> + [CLKID_CECA_32K_CLKOUT] = &s4_ceca_32k_clkout.hw, >> + [CLKID_CECB_32K_CLKIN] = &s4_cecb_32k_clkin.hw, >> + [CLKID_CECB_32K_DIV] = &s4_cecb_32k_div.hw, >> + [CLKID_CECB_32K_SEL_PRE] = &s4_cecb_32k_sel_pre.hw, >> + [CLKID_CECB_32K_SEL] = &s4_cecb_32k_sel.hw, >> + [CLKID_CECB_32K_CLKOUT] = &s4_cecb_32k_clkout.hw, >> + [CLKID_SC_CLK_SEL] = &s4_sc_clk_mux.hw, >> + [CLKID_SC_CLK_DIV] = &s4_sc_clk_div.hw, >> + [CLKID_SC_CLK_GATE] = &s4_sc_clk_gate.hw, >> + [CLKID_12_24M_CLK_GATE] = &s4_12_24M_clk_gate.hw, >> + [CLKID_12M_CLK_DIV] = &s4_12M_clk_div.hw, >> + [CLKID_12_24M_CLK_SEL] = &s4_12_24M_clk.hw, >> + [CLKID_VID_PLL_DIV] = &s4_vid_pll_div.hw, >> + [CLKID_VID_PLL_SEL] = &s4_vid_pll_sel.hw, >> + [CLKID_VID_PLL] = &s4_vid_pll.hw, >> + [CLKID_VCLK_SEL] = &s4_vclk_sel.hw, >> + [CLKID_VCLK2_SEL] = &s4_vclk2_sel.hw, >> + [CLKID_VCLK_INPUT] = &s4_vclk_input.hw, >> + [CLKID_VCLK2_INPUT] = &s4_vclk2_input.hw, >> + [CLKID_VCLK_DIV] = &s4_vclk_div.hw, >> + [CLKID_VCLK2_DIV] = &s4_vclk2_div.hw, >> + [CLKID_VCLK] = &s4_vclk.hw, >> + [CLKID_VCLK2] = &s4_vclk2.hw, >> + [CLKID_VCLK_DIV1] = &s4_vclk_div1.hw, >> + [CLKID_VCLK_DIV2_EN] = &s4_vclk_div2_en.hw, >> + [CLKID_VCLK_DIV4_EN] = &s4_vclk_div4_en.hw, >> + [CLKID_VCLK_DIV6_EN] = &s4_vclk_div6_en.hw, >> + [CLKID_VCLK_DIV12_EN] = &s4_vclk_div12_en.hw, >> + [CLKID_VCLK2_DIV1] = &s4_vclk2_div1.hw, >> + [CLKID_VCLK2_DIV2_EN] = &s4_vclk2_div2_en.hw, >> + [CLKID_VCLK2_DIV4_EN] = &s4_vclk2_div4_en.hw, >> + [CLKID_VCLK2_DIV6_EN] = &s4_vclk2_div6_en.hw, >> + [CLKID_VCLK2_DIV12_EN] = &s4_vclk2_div12_en.hw, >> + [CLKID_VCLK_DIV2] = &s4_vclk_div2.hw, >> + [CLKID_VCLK_DIV4] = &s4_vclk_div4.hw, >> + [CLKID_VCLK_DIV6] = &s4_vclk_div6.hw, >> + [CLKID_VCLK_DIV12] = &s4_vclk_div12.hw, >> + [CLKID_VCLK2_DIV2] = &s4_vclk2_div2.hw, >> + [CLKID_VCLK2_DIV4] = &s4_vclk2_div4.hw, >> + [CLKID_VCLK2_DIV6] = &s4_vclk2_div6.hw, >> + [CLKID_VCLK2_DIV12] = &s4_vclk2_div12.hw, >> + [CLKID_CTS_ENCI_SEL] = &s4_cts_enci_sel.hw, >> + [CLKID_CTS_ENCP_SEL] = &s4_cts_encp_sel.hw, >> + [CLKID_CTS_VDAC_SEL] = &s4_cts_vdac_sel.hw, >> + [CLKID_HDMI_TX_SEL] = &s4_hdmi_tx_sel.hw, >> + [CLKID_CTS_ENCI] = &s4_cts_enci.hw, >> + [CLKID_CTS_ENCP] = &s4_cts_encp.hw, >> + [CLKID_CTS_VDAC] = &s4_cts_vdac.hw, >> + [CLKID_HDMI_TX] = &s4_hdmi_tx.hw, >> + [CLKID_HDMI_SEL] = &s4_hdmi_sel.hw, >> + [CLKID_HDMI_DIV] = &s4_hdmi_div.hw, >> + [CLKID_HDMI] = &s4_hdmi.hw, >> + [CLKID_TS_CLK_DIV] = &s4_ts_clk_div.hw, >> + [CLKID_TS_CLK_GATE] = &s4_ts_clk_gate.hw, >> + [CLKID_MALI_0_SEL] = &s4_mali_0_sel.hw, >> + [CLKID_MALI_0_DIV] = &s4_mali_0_div.hw, >> + [CLKID_MALI_0] = &s4_mali_0.hw, >> + [CLKID_MALI_1_SEL] = &s4_mali_1_sel.hw, >> + [CLKID_MALI_1_DIV] = &s4_mali_1_div.hw, >> + [CLKID_MALI_1] = &s4_mali_1.hw, >> + [CLKID_MALI] = &s4_mali_mux.hw, >> + [CLKID_VDEC_P0_SEL] = &s4_vdec_p0_mux.hw, >> + [CLKID_VDEC_P0_DIV] = &s4_vdec_p0_div.hw, >> + [CLKID_VDEC_P0] = &s4_vdec_p0.hw, >> + [CLKID_VDEC_P1_SEL] = &s4_vdec_p1_mux.hw, >> + [CLKID_VDEC_P1_DIV] = &s4_vdec_p1_div.hw, >> + [CLKID_VDEC_P1] = &s4_vdec_p1.hw, >> + [CLKID_VDEC_SEL] = &s4_vdec_mux.hw, >> + [CLKID_HEVCF_P0_SEL] = &s4_hevcf_p0_mux.hw, >> + [CLKID_HEVCF_P0_DIV] = &s4_hevcf_p0_div.hw, >> + [CLKID_HEVCF_P0] = &s4_hevcf_p0.hw, >> + [CLKID_HEVCF_P1_SEL] = &s4_hevcf_p1_mux.hw, >> + [CLKID_HEVCF_P1_DIV] = &s4_hevcf_p1_div.hw, >> + [CLKID_HEVCF_P1] = &s4_hevcf_p1.hw, >> + [CLKID_HEVCF_SEL] = &s4_hevcf_mux.hw, >> + [CLKID_VPU_0_SEL] = &s4_vpu_0_sel.hw, >> + [CLKID_VPU_0_DIV] = &s4_vpu_0_div.hw, >> + [CLKID_VPU_0] = &s4_vpu_0.hw, >> + [CLKID_VPU_1_SEL] = &s4_vpu_1_sel.hw, >> + [CLKID_VPU_1_DIV] = &s4_vpu_1_div.hw, >> + [CLKID_VPU_1] = &s4_vpu_1.hw, >> + [CLKID_VPU] = &s4_vpu.hw, >> + [CLKID_VPU_CLKB_TMP_SEL] = &s4_vpu_clkb_tmp_mux.hw, >> + [CLKID_VPU_CLKB_TMP_DIV] = &s4_vpu_clkb_tmp_div.hw, >> + [CLKID_VPU_CLKB_TMP] = &s4_vpu_clkb_tmp.hw, >> + [CLKID_VPU_CLKB_DIV] = &s4_vpu_clkb_div.hw, >> + [CLKID_VPU_CLKB] = &s4_vpu_clkb.hw, >> + [CLKID_VPU_CLKC_P0_SEL] = &s4_vpu_clkc_p0_mux.hw, >> + [CLKID_VPU_CLKC_P0_DIV] = &s4_vpu_clkc_p0_div.hw, >> + [CLKID_VPU_CLKC_P0] = &s4_vpu_clkc_p0.hw, >> + [CLKID_VPU_CLKC_P1_SEL] = &s4_vpu_clkc_p1_mux.hw, >> + [CLKID_VPU_CLKC_P1_DIV] = &s4_vpu_clkc_p1_div.hw, >> + [CLKID_VPU_CLKC_P1] = &s4_vpu_clkc_p1.hw, >> + [CLKID_VPU_CLKC_SEL] = &s4_vpu_clkc_mux.hw, >> + [CLKID_VAPB_0_SEL] = &s4_vapb_0_sel.hw, >> + [CLKID_VAPB_0_DIV] = &s4_vapb_0_div.hw, >> + [CLKID_VAPB_0] = &s4_vapb_0.hw, >> + [CLKID_VAPB_1_SEL] = &s4_vapb_1_sel.hw, >> + [CLKID_VAPB_1_DIV] = &s4_vapb_1_div.hw, >> + [CLKID_VAPB_1] = &s4_vapb_1.hw, >> + [CLKID_VAPB] = &s4_vapb.hw, >> + [CLKID_GE2D] = &s4_ge2d_gate.hw, >> + [CLKID_VDIN_MEAS_SEL] = &s4_vdin_meas_mux.hw, >> + [CLKID_VDIN_MEAS_DIV] = &s4_vdin_meas_div.hw, >> + [CLKID_VDIN_MEAS_GATE] = &s4_vdin_meas_gate.hw, >> + [CLKID_SD_EMMC_C_CLK_SEL] = &s4_sd_emmc_c_clk0_sel.hw, >> + [CLKID_SD_EMMC_C_CLK_DIV] = &s4_sd_emmc_c_clk0_div.hw, >> + [CLKID_SD_EMMC_C_CLK] = &s4_sd_emmc_c_clk0.hw, >> + [CLKID_SD_EMMC_A_CLK_SEL] = &s4_sd_emmc_a_clk0_sel.hw, >> + [CLKID_SD_EMMC_A_CLK_DIV] = &s4_sd_emmc_a_clk0_div.hw, >> + [CLKID_SD_EMMC_A_CLK] = &s4_sd_emmc_a_clk0.hw, >> + [CLKID_SD_EMMC_B_CLK_SEL] = &s4_sd_emmc_b_clk0_sel.hw, >> + [CLKID_SD_EMMC_B_CLK_DIV] = &s4_sd_emmc_b_clk0_div.hw, >> + [CLKID_SD_EMMC_B_CLK] = &s4_sd_emmc_b_clk0.hw, >> + [CLKID_SPICC0_SEL] = &s4_spicc0_mux.hw, >> + [CLKID_SPICC0_DIV] = &s4_spicc0_div.hw, >> + [CLKID_SPICC0_GATE] = &s4_spicc0_gate.hw, >> + [CLKID_PWM_A_SEL] = &s4_pwm_a_mux.hw, >> + [CLKID_PWM_A_DIV] = &s4_pwm_a_div.hw, >> + [CLKID_PWM_A_GATE] = &s4_pwm_a_gate.hw, >> + [CLKID_PWM_B_SEL] = &s4_pwm_b_mux.hw, >> + [CLKID_PWM_B_DIV] = &s4_pwm_b_div.hw, >> + [CLKID_PWM_B_GATE] = &s4_pwm_b_gate.hw, >> + [CLKID_PWM_C_SEL] = &s4_pwm_c_mux.hw, >> + [CLKID_PWM_C_DIV] = &s4_pwm_c_div.hw, >> + [CLKID_PWM_C_GATE] = &s4_pwm_c_gate.hw, >> + [CLKID_PWM_D_SEL] = &s4_pwm_d_mux.hw, >> + [CLKID_PWM_D_DIV] = &s4_pwm_d_div.hw, >> + [CLKID_PWM_D_GATE] = &s4_pwm_d_gate.hw, >> + [CLKID_PWM_E_SEL] = &s4_pwm_e_mux.hw, >> + [CLKID_PWM_E_DIV] = &s4_pwm_e_div.hw, >> + [CLKID_PWM_E_GATE] = &s4_pwm_e_gate.hw, >> + [CLKID_PWM_F_SEL] = &s4_pwm_f_mux.hw, >> + [CLKID_PWM_F_DIV] = &s4_pwm_f_div.hw, >> + [CLKID_PWM_F_GATE] = &s4_pwm_f_gate.hw, >> + [CLKID_PWM_G_SEL] = &s4_pwm_g_mux.hw, >> + [CLKID_PWM_G_DIV] = &s4_pwm_g_div.hw, >> + [CLKID_PWM_G_GATE] = &s4_pwm_g_gate.hw, >> + [CLKID_PWM_H_SEL] = &s4_pwm_h_mux.hw, >> + [CLKID_PWM_H_DIV] = &s4_pwm_h_div.hw, >> + [CLKID_PWM_H_GATE] = &s4_pwm_h_gate.hw, >> + [CLKID_PWM_I_SEL] = &s4_pwm_i_mux.hw, >> + [CLKID_PWM_I_DIV] = &s4_pwm_i_div.hw, >> + [CLKID_PWM_I_GATE] = &s4_pwm_i_gate.hw, >> + [CLKID_PWM_J_SEL] = &s4_pwm_j_mux.hw, >> + [CLKID_PWM_J_DIV] = &s4_pwm_j_div.hw, >> + [CLKID_PWM_J_GATE] = &s4_pwm_j_gate.hw, >> + [CLKID_SARADC_SEL] = &s4_saradc_mux.hw, >> + [CLKID_SARADC_DIV] = &s4_saradc_div.hw, >> + [CLKID_SARADC_GATE] = &s4_saradc_gate.hw, >> + [CLKID_GEN_SEL] = &s4_gen_clk_sel.hw, >> + [CLKID_GEN_DIV] = &s4_gen_clk_div.hw, >> + [CLKID_GEN_GATE] = &s4_gen_clk.hw, >> + [CLKID_DDR] = &s4_ddr.hw, >> + [CLKID_DOS] = &s4_dos.hw, >> + [CLKID_ETHPHY] = &s4_ethphy.hw, >> + [CLKID_MALI_GATE] = &s4_mali.hw, >> + [CLKID_AOCPU] = &s4_aocpu.hw, >> + [CLKID_AUCPU] = &s4_aucpu.hw, >> + [CLKID_CEC] = &s4_cec.hw, >> + [CLKID_SD_EMMC_A] = &s4_sdemmca.hw, >> + [CLKID_SD_EMMC_B] = &s4_sdemmcb.hw, >> + [CLKID_NAND] = &s4_nand.hw, >> + [CLKID_SMARTCARD] = &s4_smartcard.hw, >> + [CLKID_ACODEC] = &s4_acodec.hw, >> + [CLKID_SPIFC] = &s4_spifc.hw, >> + [CLKID_MSR_CLK] = &s4_msr_clk.hw, >> + [CLKID_IR_CTRL] = &s4_ir_ctrl.hw, >> + [CLKID_AUDIO] = &s4_audio.hw, >> + [CLKID_ETH] = &s4_eth.hw, >> + [CLKID_UART_A] = &s4_uart_a.hw, >> + [CLKID_UART_B] = &s4_uart_b.hw, >> + [CLKID_UART_C] = &s4_uart_c.hw, >> + [CLKID_UART_D] = &s4_uart_d.hw, >> + [CLKID_UART_E] = &s4_uart_e.hw, >> + [CLKID_AIFIFO] = &s4_aififo.hw, >> + [CLKID_TS_DDR] = &s4_ts_ddr.hw, >> + [CLKID_TS_PLL] = &s4_ts_pll.hw, >> + [CLKID_G2D] = &s4_g2d.hw, >> + [CLKID_SPICC0] = &s4_spicc0.hw, >> + [CLKID_USB] = &s4_usb.hw, >> + [CLKID_I2C_M_A] = &s4_i2c_m_a.hw, >> + [CLKID_I2C_M_B] = &s4_i2c_m_b.hw, >> + [CLKID_I2C_M_C] = &s4_i2c_m_c.hw, >> + [CLKID_I2C_M_D] = &s4_i2c_m_d.hw, >> + [CLKID_I2C_M_E] = &s4_i2c_m_e.hw, >> + [CLKID_HDMITX_APB] = &s4_hdmitx_apb.hw, >> + [CLKID_I2C_S_A] = &s4_i2c_s_a.hw, >> + [CLKID_USB1_TO_DDR] = &s4_usb1_to_ddr.hw, >> + [CLKID_HDCP22] = &s4_hdcp22.hw, >> + [CLKID_MMC_APB] = &s4_mmc_apb.hw, >> + [CLKID_RSA] = &s4_rsa.hw, >> + [CLKID_CPU_DEBUG] = &s4_cpu_debug.hw, >> + [CLKID_VPU_INTR] = &s4_vpu_intr.hw, >> + [CLKID_DEMOD] = &s4_demod.hw, >> + [CLKID_SAR_ADC] = &s4_sar_adc.hw, >> + [CLKID_GIC] = &s4_gic.hw, >> + [CLKID_PWM_AB] = &s4_pwm_ab.hw, >> + [CLKID_PWM_CD] = &s4_pwm_cd.hw, >> + [CLKID_PWM_EF] = &s4_pwm_ef.hw, >> + [CLKID_PWM_GH] = &s4_pwm_gh.hw, >> + [CLKID_PWM_IJ] = &s4_pwm_ij.hw, >> + [CLKID_HDCP22_ESMCLK_SEL] = &s4_hdcp22_esmclk_mux.hw, >> + [CLKID_HDCP22_ESMCLK_DIV] = &s4_hdcp22_esmclk_div.hw, >> + [CLKID_HDCP22_ESMCLK_GATE] = &s4_hdcp22_esmclk_gate.hw, >> + [CLKID_HDCP22_SKPCLK_SEL] = &s4_hdcp22_skpclk_mux.hw, >> + [CLKID_HDCP22_SKPCLK_DIV] = &s4_hdcp22_skpclk_div.hw, >> + [CLKID_HDCP22_SKPCLK_GATE] = &s4_hdcp22_skpclk_gate.hw, >> + [NR_CLKS] = NULL >> + }, >> + .num = NR_CLKS, >> +}; >> + >> +/* Convenience table to populate regmap in .probe */ >> +static struct clk_regmap *const s4_periphs_clk_regmaps[] = { >> + &s4_rtc_32k_by_oscin_clkin, >> + &s4_rtc_32k_by_oscin_div, >> + &s4_rtc_32k_by_oscin_sel, >> + &s4_rtc_32k_by_oscin, >> + &s4_rtc_clk, >> + &s4_sysclk_b_sel, >> + &s4_sysclk_b_div, >> + &s4_sysclk_b, >> + &s4_sysclk_a_sel, >> + &s4_sysclk_a_div, >> + &s4_sysclk_a, >> + &s4_sys_clk, >> + &s4_ceca_32k_clkin, >> + &s4_ceca_32k_div, >> + &s4_ceca_32k_sel_pre, >> + &s4_ceca_32k_sel, >> + &s4_ceca_32k_clkout, >> + &s4_cecb_32k_clkin, >> + &s4_cecb_32k_div, >> + &s4_cecb_32k_sel_pre, >> + &s4_cecb_32k_sel, >> + &s4_cecb_32k_clkout, >> + &s4_sc_clk_mux, >> + &s4_sc_clk_div, >> + &s4_sc_clk_gate, >> + &s4_12_24M_clk_gate, >> + &s4_12_24M_clk, >> + &s4_vid_pll_div, >> + &s4_vid_pll_sel, >> + &s4_vid_pll, >> + &s4_vclk_sel, >> + &s4_vclk2_sel, >> + &s4_vclk_input, >> + &s4_vclk2_input, >> + &s4_vclk_div, >> + &s4_vclk2_div, >> + &s4_vclk, >> + &s4_vclk2, >> + &s4_vclk_div1, >> + &s4_vclk_div2_en, >> + &s4_vclk_div4_en, >> + &s4_vclk_div6_en, >> + &s4_vclk_div12_en, >> + &s4_vclk2_div1, >> + &s4_vclk2_div2_en, >> + &s4_vclk2_div4_en, >> + &s4_vclk2_div6_en, >> + &s4_vclk2_div12_en, >> + &s4_cts_enci_sel, >> + &s4_cts_encp_sel, >> + &s4_cts_vdac_sel, >> + &s4_hdmi_tx_sel, >> + &s4_cts_enci, >> + &s4_cts_encp, >> + &s4_cts_vdac, >> + &s4_hdmi_tx, >> + &s4_hdmi_sel, >> + &s4_hdmi_div, >> + &s4_hdmi, >> + &s4_ts_clk_div, >> + &s4_ts_clk_gate, >> + &s4_mali_0_sel, >> + &s4_mali_0_div, >> + &s4_mali_0, >> + &s4_mali_1_sel, >> + &s4_mali_1_div, >> + &s4_mali_1, >> + &s4_mali_mux, >> + &s4_vdec_p0_mux, >> + &s4_vdec_p0_div, >> + &s4_vdec_p0, >> + &s4_vdec_p1_mux, >> + &s4_vdec_p1_div, >> + &s4_vdec_p1, >> + &s4_vdec_mux, >> + &s4_hevcf_p0_mux, >> + &s4_hevcf_p0_div, >> + &s4_hevcf_p0, >> + &s4_hevcf_p1_mux, >> + &s4_hevcf_p1_div, >> + &s4_hevcf_p1, >> + &s4_hevcf_mux, >> + &s4_vpu_0_sel, >> + &s4_vpu_0_div, >> + &s4_vpu_0, >> + &s4_vpu_1_sel, >> + &s4_vpu_1_div, >> + &s4_vpu_1, >> + &s4_vpu, >> + &s4_vpu_clkb_tmp_mux, >> + &s4_vpu_clkb_tmp_div, >> + &s4_vpu_clkb_tmp, >> + &s4_vpu_clkb_div, >> + &s4_vpu_clkb, >> + &s4_vpu_clkc_p0_mux, >> + &s4_vpu_clkc_p0_div, >> + &s4_vpu_clkc_p0, >> + &s4_vpu_clkc_p1_mux, >> + &s4_vpu_clkc_p1_div, >> + &s4_vpu_clkc_p1, >> + &s4_vpu_clkc_mux, >> + &s4_vapb_0_sel, >> + &s4_vapb_0_div, >> + &s4_vapb_0, >> + &s4_vapb_1_sel, >> + &s4_vapb_1_div, >> + &s4_vapb_1, >> + &s4_vapb, >> + &s4_ge2d_gate, >> + &s4_hdcp22_esmclk_mux, >> + &s4_hdcp22_esmclk_div, >> + &s4_hdcp22_esmclk_gate, >> + &s4_hdcp22_skpclk_mux, >> + &s4_hdcp22_skpclk_div, >> + &s4_hdcp22_skpclk_gate, >> + &s4_vdin_meas_mux, >> + &s4_vdin_meas_div, >> + &s4_vdin_meas_gate, >> + &s4_sd_emmc_c_clk0_sel, >> + &s4_sd_emmc_c_clk0_div, >> + &s4_sd_emmc_c_clk0, >> + &s4_sd_emmc_a_clk0_sel, >> + &s4_sd_emmc_a_clk0_div, >> + &s4_sd_emmc_a_clk0, >> + &s4_sd_emmc_b_clk0_sel, >> + &s4_sd_emmc_b_clk0_div, >> + &s4_sd_emmc_b_clk0, >> + &s4_spicc0_mux, >> + &s4_spicc0_div, >> + &s4_spicc0_gate, >> + &s4_pwm_a_mux, >> + &s4_pwm_a_div, >> + &s4_pwm_a_gate, >> + &s4_pwm_b_mux, >> + &s4_pwm_b_div, >> + &s4_pwm_b_gate, >> + &s4_pwm_c_mux, >> + &s4_pwm_c_div, >> + &s4_pwm_c_gate, >> + &s4_pwm_d_mux, >> + &s4_pwm_d_div, >> + &s4_pwm_d_gate, >> + &s4_pwm_e_mux, >> + &s4_pwm_e_div, >> + &s4_pwm_e_gate, >> + &s4_pwm_f_mux, >> + &s4_pwm_f_div, >> + &s4_pwm_f_gate, >> + &s4_pwm_g_mux, >> + &s4_pwm_g_div, >> + &s4_pwm_g_gate, >> + &s4_pwm_h_mux, >> + &s4_pwm_h_div, >> + &s4_pwm_h_gate, >> + &s4_pwm_i_mux, >> + &s4_pwm_i_div, >> + &s4_pwm_i_gate, >> + &s4_pwm_j_mux, >> + &s4_pwm_j_div, >> + &s4_pwm_j_gate, >> + &s4_saradc_mux, >> + &s4_saradc_div, >> + &s4_saradc_gate, >> + &s4_gen_clk_sel, >> + &s4_gen_clk_div, >> + &s4_gen_clk, >> + &s4_ddr, >> + &s4_dos, >> + &s4_ethphy, >> + &s4_mali, >> + &s4_aocpu, >> + &s4_aucpu, >> + &s4_cec, >> + &s4_sdemmca, >> + &s4_sdemmcb, >> + &s4_nand, >> + &s4_smartcard, >> + &s4_acodec, >> + &s4_spifc, >> + &s4_msr_clk, >> + &s4_ir_ctrl, >> + &s4_audio, >> + &s4_eth, >> + &s4_uart_a, >> + &s4_uart_b, >> + &s4_uart_c, >> + &s4_uart_d, >> + &s4_uart_e, >> + &s4_aififo, >> + &s4_ts_ddr, >> + &s4_ts_pll, >> + &s4_g2d, >> + &s4_spicc0, >> + &s4_usb, >> + &s4_i2c_m_a, >> + &s4_i2c_m_b, >> + &s4_i2c_m_c, >> + &s4_i2c_m_d, >> + &s4_i2c_m_e, >> + &s4_hdmitx_apb, >> + &s4_i2c_s_a, >> + &s4_usb1_to_ddr, >> + &s4_hdcp22, >> + &s4_mmc_apb, >> + &s4_rsa, >> + &s4_cpu_debug, >> + &s4_vpu_intr, >> + &s4_demod, >> + &s4_sar_adc, >> + &s4_gic, >> + &s4_pwm_ab, >> + &s4_pwm_cd, >> + &s4_pwm_ef, >> + &s4_pwm_gh, >> + &s4_pwm_ij, >> + &s4_demod_core_clk_mux, >> + &s4_demod_core_clk_div, >> + &s4_demod_core_clk_gate, >> + &s4_adc_extclk_in_mux, >> + &s4_adc_extclk_in_div, >> + &s4_adc_extclk_in_gate, >> +}; >> + >> +static struct regmap_config clkc_regmap_config = { >> + .reg_bits = 32, >> + .val_bits = 32, >> + .reg_stride = 4, >> +}; >> + >> +static int meson_s4_periphs_probe(struct platform_device *pdev) >> +{ >> + struct device *dev = &pdev->dev; >> + struct regmap *regmap; >> + void __iomem *base; >> + int ret, i; >> + >> + base = devm_platform_ioremap_resource(pdev, 0); >> + if (IS_ERR(base)) >> + return PTR_ERR(base); >> + >> + regmap = devm_regmap_init_mmio(dev, base, &clkc_regmap_config); >> + if (IS_ERR(regmap)) >> + return PTR_ERR(regmap); >> + >> + /* Populate regmap for the regmap backed clocks */ >> + for (i = 0; i < ARRAY_SIZE(s4_periphs_clk_regmaps); i++) >> + s4_periphs_clk_regmaps[i]->map = regmap; >> + >> + for (i = 0; i < s4_periphs_hw_onecell_data.num; i++) { >> + /* array might be sparse */ >> + if (!s4_periphs_hw_onecell_data.hws[i]) >> + continue; >> + >> + ret = devm_clk_hw_register(dev, s4_periphs_hw_onecell_data.hws[i]); >> + if (ret) { >> + dev_err(dev, "Clock registration failed\n"); >> + return ret; >> + } >> + } >> + >> + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, >> + &s4_periphs_hw_onecell_data); >> +} >> + >> +static const struct of_device_id clkc_match_table[] = { >> + { >> + .compatible = "amlogic,s4-peripherals-clkc", >> + }, >> + {} >> +}; >> + >> +static struct platform_driver s4_driver = { >> + .probe = meson_s4_periphs_probe, >> + .driver = { >> + .name = "s4-periphs-clkc", >> + .of_match_table = clkc_match_table, >> + }, >> +}; >> + >> +module_platform_driver(s4_driver); >> +MODULE_LICENSE("GPL"); >> diff --git a/drivers/clk/meson/s4-peripherals.h b/drivers/clk/meson/s4-peripherals.h >> new file mode 100644 >> index 000000000000..13ef07bada83 >> --- /dev/null >> +++ b/drivers/clk/meson/s4-peripherals.h >> @@ -0,0 +1,218 @@ >> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >> +/* >> + * Copyright (c) 2021 Amlogic, inc. >> + * Author: Yu Tu <yu.tu@amlogic.com> >> + */ >> + >> +#ifndef __MESON_S4_PERIPHERALS_H__ >> +#define __MESON_S4_PERIPHERALS_H__ >> + >> +/* >> + * Clock controller register offsets >> + * REG_BASE: REGISTER_BASE_ADDR = 0xfe000000 >> + */ >> +#define CLKCTRL_OSCIN_CTRL 0x004 >> +#define CLKCTRL_RTC_BY_OSCIN_CTRL0 0x008 >> +#define CLKCTRL_RTC_BY_OSCIN_CTRL1 0x00c >> +#define CLKCTRL_RTC_CTRL 0x010 >> +#define CLKCTRL_CHECK_CLK_RESULT 0x014 >> +#define CLKCTRL_MBIST_ATSPEED_CTRL 0x018 >> +#define CLKCTRL_LOCK_BIT_REG0 0x020 >> +#define CLKCTRL_LOCK_BIT_REG1 0x024 >> +#define CLKCTRL_LOCK_BIT_REG2 0x028 >> +#define CLKCTRL_LOCK_BIT_REG3 0x02c >> +#define CLKCTRL_PROT_BIT_REG0 0x030 >> +#define CLKCTRL_PROT_BIT_REG1 0x034 >> +#define CLKCTRL_PROT_BIT_REG2 0x038 >> +#define CLKCTRL_PROT_BIT_REG3 0x03c >> +#define CLKCTRL_SYS_CLK_CTRL0 0x040 >> +#define CLKCTRL_SYS_CLK_EN0_REG0 0x044 >> +#define CLKCTRL_SYS_CLK_EN0_REG1 0x048 >> +#define CLKCTRL_SYS_CLK_EN0_REG2 0x04c >> +#define CLKCTRL_SYS_CLK_EN0_REG3 0x050 >> +#define CLKCTRL_SYS_CLK_EN1_REG0 0x054 >> +#define CLKCTRL_SYS_CLK_EN1_REG1 0x058 >> +#define CLKCTRL_SYS_CLK_EN1_REG2 0x05c >> +#define CLKCTRL_SYS_CLK_EN1_REG3 0x060 >> +#define CLKCTRL_SYS_CLK_VPU_EN0 0x064 >> +#define CLKCTRL_SYS_CLK_VPU_EN1 0x068 >> +#define CLKCTRL_AXI_CLK_CTRL0 0x06c >> +#define CLKCTRL_TST_CTRL0 0x080 >> +#define CLKCTRL_TST_CTRL1 0x084 >> +#define CLKCTRL_CECA_CTRL0 0x088 >> +#define CLKCTRL_CECA_CTRL1 0x08c >> +#define CLKCTRL_CECB_CTRL0 0x090 >> +#define CLKCTRL_CECB_CTRL1 0x094 >> +#define CLKCTRL_SC_CLK_CTRL 0x098 >> +#define CLKCTRL_RAMA_CLK_CTRL0 0x0a4 >> +#define CLKCTRL_CLK12_24_CTRL 0x0a8 >> +#define CLKCTRL_VID_CLK_CTRL 0x0c0 >> +#define CLKCTRL_VID_CLK_CTRL2 0x0c4 >> +#define CLKCTRL_VID_CLK_DIV 0x0c8 >> +#define CLKCTRL_VIID_CLK_DIV 0x0cc >> +#define CLKCTRL_VIID_CLK_CTRL 0x0d0 >> +#define CLKCTRL_HDMI_CLK_CTRL 0x0e0 >> +#define CLKCTRL_VID_PLL_CLK_DIV 0x0e4 >> +#define CLKCTRL_VPU_CLK_CTRL 0x0e8 >> +#define CLKCTRL_VPU_CLKB_CTRL 0x0ec >> +#define CLKCTRL_VPU_CLKC_CTRL 0x0f0 >> +#define CLKCTRL_VID_LOCK_CLK_CTRL 0x0f4 >> +#define CLKCTRL_VDIN_MEAS_CLK_CTRL 0x0f8 >> +#define CLKCTRL_VAPBCLK_CTRL 0x0fc >> +#define CLKCTRL_HDCP22_CTRL 0x100 >> +#define CLKCTRL_CDAC_CLK_CTRL 0x108 >> +#define CLKCTRL_VDEC_CLK_CTRL 0x140 >> +#define CLKCTRL_VDEC2_CLK_CTRL 0x144 >> +#define CLKCTRL_VDEC3_CLK_CTRL 0x148 >> +#define CLKCTRL_VDEC4_CLK_CTRL 0x14c >> +#define CLKCTRL_TS_CLK_CTRL 0x158 >> +#define CLKCTRL_MALI_CLK_CTRL 0x15c >> +#define CLKCTRL_ETH_CLK_CTRL 0x164 >> +#define CLKCTRL_NAND_CLK_CTRL 0x168 >> +#define CLKCTRL_SD_EMMC_CLK_CTRL 0x16c >> +#define CLKCTRL_SPICC_CLK_CTRL 0x174 >> +#define CLKCTRL_GEN_CLK_CTRL 0x178 >> +#define CLKCTRL_SAR_CLK_CTRL 0x17c >> +#define CLKCTRL_PWM_CLK_AB_CTRL 0x180 >> +#define CLKCTRL_PWM_CLK_CD_CTRL 0x184 >> +#define CLKCTRL_PWM_CLK_EF_CTRL 0x188 >> +#define CLKCTRL_PWM_CLK_GH_CTRL 0x18c >> +#define CLKCTRL_PWM_CLK_IJ_CTRL 0x190 >> +#define CLKCTRL_DEMOD_CLK_CTRL 0x200 >> +#define CLKCTRL_TIMESTAMP_CTRL 0x400 >> +#define CLKCTRL_TIMESTAMP_CTRL1 0x404 >> +#define CLKCTRL_TIMESTAMP_CTRL2 0x40c >> +#define CLKCTRL_TIMESTAMP_RD0 0x410 >> +#define CLKCTRL_TIMESTAMP_RD1 0x414 >> +#define CLKCTRL_TIMEBASE_CTRL0 0x418 >> +#define CLKCTRL_TIMEBASE_CTRL1 0x41c >> +#define CLKCTRL_EFUSE_CPU_CFG01 0x480 >> +#define CLKCTRL_EFUSE_CPU_CFG2 0x484 >> +#define CLKCTRL_EFUSE_ENCP_CFG0 0x488 >> +#define CLKCTRL_EFUSE_MALI_CFG01 0x48c >> +#define CLKCTRL_EFUSE_LOCK 0x498 >> + >> +/* >> + * CLKID index values >> + * >> + * These indices are entirely contrived and do not map onto the hardware. >> + * It has now been decided to expose everything by default in the DT header: >> + * include/dt-bindings/clock/axg-clkc.h. Only the clocks ids we don't want >> + * to expose, such as the internal muxes and dividers of composite clocks, >> + * will remain defined here. >> + */ >> +#define CLKID_RTC_32K_CLKIN 0 >> +#define CLKID_RTC_32K_DIV 1 >> +#define CLKID_RTC_32K_SEL 2 >> +#define CLKID_RTC_32K_XATL 3 >> +#define CLKID_SYS_CLK_B_SEL 5 >> +#define CLKID_SYS_CLK_B_DIV 6 >> +#define CLKID_SYS_CLK_A_SEL 8 >> +#define CLKID_SYS_CLK_A_DIV 9 >> +#define CLKID_CECA_32K_CLKIN 12 >> +#define CLKID_CECA_32K_DIV 13 >> +#define CLKID_CECA_32K_SEL_PRE 14 >> +#define CLKID_CECA_32K_SEL 15 >> +#define CLKID_CECB_32K_CLKIN 17 >> +#define CLKID_CECB_32K_DIV 18 >> +#define CLKID_CECB_32K_SEL_PRE 19 >> +#define CLKID_CECB_32K_SEL 20 >> +#define CLKID_SC_CLK_SEL 22 >> +#define CLKID_SC_CLK_DIV 23 >> +#define CLKID_12_24M_CLK_GATE 25 >> +#define CLKID_12M_CLK_DIV 26 >> +#define CLKID_VID_PLL_DIV 28 >> +#define CLKID_VID_PLL_SEL 29 >> +#define CLKID_VCLK_SEL 31 >> +#define CLKID_VCLK2_SEL 32 >> +#define CLKID_VCLK_INPUT 33 >> +#define CLKID_VCLK2_INPUT 34 >> +#define CLKID_VCLK_DIV 35 >> +#define CLKID_VCLK2_DIV 36 >> +#define CLKID_VCLK_DIV2_EN 40 >> +#define CLKID_VCLK_DIV4_EN 41 >> +#define CLKID_VCLK_DIV6_EN 42 >> +#define CLKID_VCLK_DIV12_EN 43 >> +#define CLKID_VCLK2_DIV2_EN 45 >> +#define CLKID_VCLK2_DIV4_EN 46 >> +#define CLKID_VCLK2_DIV6_EN 47 >> +#define CLKID_VCLK2_DIV12_EN 48 >> +#define CLKID_CTS_ENCI_SEL 57 >> +#define CLKID_CTS_ENCP_SEL 58 >> +#define CLKID_CTS_VDAC_SEL 59 >> +#define CLKID_HDMI_TX_SEL 60 >> +#define CLKID_HDMI_TX 64 >> +#define CLKID_HDMI_SEL 65 >> +#define CLKID_HDMI_DIV 66 >> +#define CLKID_TS_CLK_DIV 68 >> +#define CLKID_MALI_0_SEL 70 >> +#define CLKID_MALI_0_DIV 71 >> +#define CLKID_MALI_1_SEL 73 >> +#define CLKID_MALI_1_DIV 74 >> +#define CLKID_VDEC_P0_SEL 77 >> +#define CLKID_VDEC_P0_DIV 78 >> +#define CLKID_VDEC_P1_SEL 80 >> +#define CLKID_VDEC_P1_DIV 81 >> +#define CLKID_HEVCF_P0_SEL 84 >> +#define CLKID_HEVCF_P0_DIV 85 >> +#define CLKID_HEVCF_P1_SEL 87 >> +#define CLKID_HEVCF_P1_DIV 88 >> +#define CLKID_VPU_0_SEL 91 >> +#define CLKID_VPU_0_DIV 92 >> +#define CLKID_VPU_1_SEL 94 >> +#define CLKID_VPU_1_DIV 95 >> +#define CLKID_VPU_CLKB_TMP_SEL 98 >> +#define CLKID_VPU_CLKB_TMP_DIV 99 >> +#define CLKID_VPU_CLKB_DIV 101 >> +#define CLKID_VPU_CLKC_P0_SEL 103 >> +#define CLKID_VPU_CLKC_P0_DIV 104 >> +#define CLKID_VPU_CLKC_P1_SEL 106 >> +#define CLKID_VPU_CLKC_P1_DIV 107 >> +#define CLKID_VAPB_0_SEL 110 >> +#define CLKID_VAPB_0_DIV 111 >> +#define CLKID_VAPB_1_SEL 113 >> +#define CLKID_VAPB_1_DIV 114 >> +#define CLKID_VDIN_MEAS_SEL 118 >> +#define CLKID_VDIN_MEAS_DIV 119 >> +#define CLKID_SD_EMMC_C_CLK_SEL 121 >> +#define CLKID_SD_EMMC_C_CLK_DIV 122 >> +#define CLKID_SD_EMMC_A_CLK_SEL 124 >> +#define CLKID_SD_EMMC_A_CLK_DIV 125 >> +#define CLKID_SD_EMMC_B_CLK_SEL 127 >> +#define CLKID_SD_EMMC_B_CLK_DIV 128 >> +#define CLKID_SPICC0_SEL 130 >> +#define CLKID_SPICC0_DIV 131 >> +#define CLKID_PWM_A_SEL 133 >> +#define CLKID_PWM_A_DIV 134 >> +#define CLKID_PWM_B_SEL 136 >> +#define CLKID_PWM_B_DIV 137 >> +#define CLKID_PWM_C_SEL 139 >> +#define CLKID_PWM_C_DIV 140 >> +#define CLKID_PWM_D_SEL 142 >> +#define CLKID_PWM_D_DIV 143 >> +#define CLKID_PWM_E_SEL 145 >> +#define CLKID_PWM_E_DIV 146 >> +#define CLKID_PWM_F_SEL 148 >> +#define CLKID_PWM_F_DIV 149 >> +#define CLKID_PWM_G_SEL 151 >> +#define CLKID_PWM_G_DIV 152 >> +#define CLKID_PWM_H_SEL 154 >> +#define CLKID_PWM_H_DIV 155 >> +#define CLKID_PWM_I_SEL 157 >> +#define CLKID_PWM_I_DIV 158 >> +#define CLKID_PWM_J_SEL 160 >> +#define CLKID_PWM_J_DIV 161 >> +#define CLKID_SARADC_SEL 163 >> +#define CLKID_SARADC_DIV 164 >> +#define CLKID_GEN_SEL 166 >> +#define CLKID_GEN_DIV 167 >> +#define CLKID_HDCP22_ESMCLK_SEL 219 >> +#define CLKID_HDCP22_ESMCLK_DIV 220 >> +#define CLKID_HDCP22_SKPCLK_SEL 222 >> +#define CLKID_HDCP22_SKPCLK_DIV 223 >> + >> +#define NR_CLKS 225 >> +/* include the CLKIDs that have been made part of the DT binding */ >> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> >> + >> +#endif /* __MESON_S4_PERIPHERALS_H__ */ >> diff --git a/include/dt-bindings/clock/amlogic,s4-peripherals-clkc.h b/include/dt-bindings/clock/amlogic,s4-peripherals-clkc.h >> new file mode 100644 >> index 000000000000..bbec5094d5c3 >> --- /dev/null >> +++ b/include/dt-bindings/clock/amlogic,s4-peripherals-clkc.h >> @@ -0,0 +1,131 @@ >> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >> +/* >> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >> + * Author: Yu Tu <yu.tu@amlogic.com> >> + */ >> + >> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PERIPHERALS_CLKC_H >> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PERIPHERALS_CLKC_H >> + >> +/* >> + * CLKID index values >> + */ >> + >> +#define CLKID_RTC_CLK 4 >> +#define CLKID_SYS_CLK_B_GATE 7 >> +#define CLKID_SYS_CLK_A_GATE 10 >> +#define CLKID_SYS_CLK 11 >> +#define CLKID_CECA_32K_CLKOUT 16 >> +#define CLKID_CECB_32K_CLKOUT 21 >> +#define CLKID_SC_CLK_GATE 24 >> +#define CLKID_12_24M_CLK_SEL 27 >> +#define CLKID_VID_PLL 30 >> +#define CLKID_VCLK 37 >> +#define CLKID_VCLK2 38 >> +#define CLKID_VCLK_DIV1 39 >> +#define CLKID_VCLK2_DIV1 44 >> +#define CLKID_VCLK_DIV2 49 >> +#define CLKID_VCLK_DIV4 50 >> +#define CLKID_VCLK_DIV6 51 >> +#define CLKID_VCLK_DIV12 52 >> +#define CLKID_VCLK2_DIV2 53 >> +#define CLKID_VCLK2_DIV4 54 >> +#define CLKID_VCLK2_DIV6 55 >> +#define CLKID_VCLK2_DIV12 56 >> +#define CLKID_CTS_ENCI 61 >> +#define CLKID_CTS_ENCP 62 >> +#define CLKID_CTS_VDAC 63 >> +#define CLKID_HDMI 67 >> +#define CLKID_TS_CLK_GATE 69 >> +#define CLKID_MALI_0 72 >> +#define CLKID_MALI_1 75 >> +#define CLKID_MALI 76 >> +#define CLKID_VDEC_P0 79 >> +#define CLKID_VDEC_P1 82 >> +#define CLKID_VDEC_SEL 83 >> +#define CLKID_HEVCF_P0 86 >> +#define CLKID_HEVCF_P1 89 >> +#define CLKID_HEVCF_SEL 90 >> +#define CLKID_VPU_0 93 >> +#define CLKID_VPU_1 96 >> +#define CLKID_VPU 97 >> +#define CLKID_VPU_CLKB_TMP 100 >> +#define CLKID_VPU_CLKB 102 >> +#define CLKID_VPU_CLKC_P0 105 >> +#define CLKID_VPU_CLKC_P1 108 >> +#define CLKID_VPU_CLKC_SEL 109 >> +#define CLKID_VAPB_0 112 >> +#define CLKID_VAPB_1 115 >> +#define CLKID_VAPB 116 >> +#define CLKID_GE2D 117 >> +#define CLKID_VDIN_MEAS_GATE 120 >> +#define CLKID_SD_EMMC_C_CLK 123 >> +#define CLKID_SD_EMMC_A_CLK 126 >> +#define CLKID_SD_EMMC_B_CLK 129 >> +#define CLKID_SPICC0_GATE 132 >> +#define CLKID_PWM_A_GATE 135 >> +#define CLKID_PWM_B_GATE 138 >> +#define CLKID_PWM_C_GATE 141 >> +#define CLKID_PWM_D_GATE 144 >> +#define CLKID_PWM_E_GATE 147 >> +#define CLKID_PWM_F_GATE 150 >> +#define CLKID_PWM_G_GATE 153 >> +#define CLKID_PWM_H_GATE 156 >> +#define CLKID_PWM_I_GATE 159 >> +#define CLKID_PWM_J_GATE 162 >> +#define CLKID_SARADC_GATE 165 >> +#define CLKID_GEN_GATE 168 >> +#define CLKID_DDR 169 >> +#define CLKID_DOS 170 >> +#define CLKID_ETHPHY 171 >> +#define CLKID_MALI_GATE 172 >> +#define CLKID_AOCPU 173 >> +#define CLKID_AUCPU 174 >> +#define CLKID_CEC 175 >> +#define CLKID_SD_EMMC_A 176 >> +#define CLKID_SD_EMMC_B 177 >> +#define CLKID_NAND 178 >> +#define CLKID_SMARTCARD 179 >> +#define CLKID_ACODEC 180 >> +#define CLKID_SPIFC 181 >> +#define CLKID_MSR_CLK 182 >> +#define CLKID_IR_CTRL 183 >> +#define CLKID_AUDIO 184 >> +#define CLKID_ETH 185 >> +#define CLKID_UART_A 186 >> +#define CLKID_UART_B 187 >> +#define CLKID_UART_C 188 >> +#define CLKID_UART_D 189 >> +#define CLKID_UART_E 190 >> +#define CLKID_AIFIFO 191 >> +#define CLKID_TS_DDR 192 >> +#define CLKID_TS_PLL 193 >> +#define CLKID_G2D 194 >> +#define CLKID_SPICC0 195 >> +#define CLKID_SPICC1 196 >> +#define CLKID_USB 197 >> +#define CLKID_I2C_M_A 198 >> +#define CLKID_I2C_M_B 199 >> +#define CLKID_I2C_M_C 200 >> +#define CLKID_I2C_M_D 201 >> +#define CLKID_I2C_M_E 202 >> +#define CLKID_HDMITX_APB 203 >> +#define CLKID_I2C_S_A 204 >> +#define CLKID_USB1_TO_DDR 205 >> +#define CLKID_HDCP22 206 >> +#define CLKID_MMC_APB 207 >> +#define CLKID_RSA 208 >> +#define CLKID_CPU_DEBUG 209 >> +#define CLKID_VPU_INTR 210 >> +#define CLKID_DEMOD 211 >> +#define CLKID_SAR_ADC 212 >> +#define CLKID_GIC 213 >> +#define CLKID_PWM_AB 214 >> +#define CLKID_PWM_CD 215 >> +#define CLKID_PWM_EF 216 >> +#define CLKID_PWM_GH 217 >> +#define CLKID_PWM_IJ 218 >> +#define CLKID_HDCP22_ESMCLK_GATE 221 >> +#define CLKID_HDCP22_SKPCLK_GATE 224 >> + >> +#endif /* _DT_BINDINGS_CLOCK_AMLOGIC_S4_PERIPHERALS_CLKC_H */ > > . ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 3/4] clk: meson: s4: add s4 SoC peripheral clock controller driver and bindings @ 2022-11-28 8:08 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-28 8:08 UTC (permalink / raw) To: Jerome Brunet, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang Hi Jerome, On 2022/11/25 17:54, Jerome Brunet wrote: > [ EXTERNAL EMAIL ] > > > On Wed 23 Nov 2022 at 10:13, Yu Tu <yu.tu@amlogic.com> wrote: > >> Add the peripherals clock controller found and bindings in the s4 SoC family. >> >> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >> --- >> .../clock/amlogic,s4-peripherals-clkc.yaml | 105 + >> drivers/clk/meson/Kconfig | 12 + >> drivers/clk/meson/Makefile | 1 + >> drivers/clk/meson/s4-peripherals.c | 3783 +++++++++++++++++ >> drivers/clk/meson/s4-peripherals.h | 218 + >> .../clock/amlogic,s4-peripherals-clkc.h | 131 + >> 6 files changed, 4250 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml >> create mode 100644 drivers/clk/meson/s4-peripherals.c >> create mode 100644 drivers/clk/meson/s4-peripherals.h >> create mode 100644 include/dt-bindings/clock/amlogic,s4-peripherals-clkc.h >> >> diff --git a/Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml >> new file mode 100644 >> index 000000000000..d1ea05ab7ec9 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml >> @@ -0,0 +1,105 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/clock/amlogic,s4-peripherals-clkc.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Amlogic Meson S serials Peripherals Clock Controller >> + >> +maintainers: >> + - Neil Armstrong <narmstrong@baylibre.com> >> + - Jerome Brunet <jbrunet@baylibre.com> >> + - Yu Tu <yu.hu@amlogic.com> >> + >> + >> +properties: >> + compatible: >> + const: amlogic,s4-peripherals-clkc >> + >> + reg: >> + maxItems: 1 >> + >> + clocks: >> + items: >> + - description: input fixed pll div2 >> + - description: input fixed pll div2p5 >> + - description: input fixed pll div3 >> + - description: input fixed pll div4 >> + - description: input fixed pll div5 >> + - description: input fixed pll div7 >> + - description: input hifi pll >> + - description: input gp0 pll >> + - description: input mpll0 >> + - description: input mpll1 >> + - description: input mpll2 >> + - description: input mpll3 >> + - description: input hdmi pll >> + - description: input oscillator (usually at 24MHz) >> + - description: input external 32kHz reference (optional) >> + >> + clock-names: >> + items: >> + - const: fclk_div2 >> + - const: fclk_div2p5 >> + - const: fclk_div3 >> + - const: fclk_div4 >> + - const: fclk_div5 >> + - const: fclk_div7 >> + - const: hifi_pll >> + - const: gp0_pll >> + - const: mpll0 >> + - const: mpll1 >> + - const: mpll2 >> + - const: mpll3 >> + - const: hdmi_pll >> + - const: xtal >> + - const: ext_32k >> + >> + "#clock-cells": >> + const: 1 >> + >> +required: >> + - compatible >> + - reg >> + - clocks >> + - clock-names >> + - "#clock-cells" >> + >> +additionalProperties: false >> + >> +examples: >> + - | >> + #include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> >> + >> + /* 32KHz reference crystal */ >> + ext_32k: ref32k { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <32000>; >> + }; >> + >> + clkc_periphs: clock-controller@fe000000 { >> + compatible = "amlogic,s4-peripherals-clkc"; >> + reg = <0xfe000000 0x49c>; >> + clocks = <&clkc_pll 3>, >> + <&clkc_pll 13>, >> + <&clkc_pll 5>, >> + <&clkc_pll 7>, >> + <&clkc_pll 9>, >> + <&clkc_pll 11>, >> + <&clkc_pll 17>, >> + <&clkc_pll 15>, >> + <&clkc_pll 25>, >> + <&clkc_pll 27>, >> + <&clkc_pll 29>, >> + <&clkc_pll 31>, >> + <&clkc_pll 20>, >> + <&xtal>, >> + <&ext_32k>; >> + clock-names = "fclk_div2", "fclk_div2p5", "fclk_div3", "fclk_div4", >> + "fclk_div5", "fclk_div7", "hifi_pll", "gp0_pll", >> + "mpll0", "mpll1", "mpll2", "mpll3", "hdmi_pll", "xtal", >> + "ext_32k"; >> + #clock-cells = <1>; >> + }; >> +... >> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig >> index a663c90a3f3b..a6eb9fa15c74 100644 >> --- a/drivers/clk/meson/Kconfig >> +++ b/drivers/clk/meson/Kconfig >> @@ -128,4 +128,16 @@ config COMMON_CLK_S4_PLL >> aka s4. Amlogic S805X2 and S905Y4 devices include AQ222 and AQ229. >> Say Y if you want the board to work, because plls are the parent of most >> peripherals. >> + >> +config COMMON_CLK_S4 >> + tristate "S4 SoC Peripherals clock controllers support" >> + depends on ARM64 >> + default y >> + select COMMON_CLK_MESON_REGMAP >> + select COMMON_CLK_MESON_DUALDIV >> + select COMMON_CLK_MESON_VID_PLL_DIV >> + help >> + Support for the Peripherals clock controller on Amlogic S805X2 and S905Y4 >> + devices, aka s4. Amlogic S805X2 and S905Y4 devices include AQ222 and AQ229. >> + Say Y if you want peripherals to work. >> endmenu >> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile >> index 376f49cc13f1..c9130afccb48 100644 >> --- a/drivers/clk/meson/Makefile >> +++ b/drivers/clk/meson/Makefile >> @@ -20,3 +20,4 @@ obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o >> obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o >> obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o >> obj-$(CONFIG_COMMON_CLK_S4_PLL) += s4-pll.o >> +obj-$(CONFIG_COMMON_CLK_S4) += s4-peripherals.o >> diff --git a/drivers/clk/meson/s4-peripherals.c b/drivers/clk/meson/s4-peripherals.c >> new file mode 100644 >> index 000000000000..8ce5156d3510 >> --- /dev/null >> +++ b/drivers/clk/meson/s4-peripherals.c >> @@ -0,0 +1,3783 @@ >> +// SPDX-License-Identifier: GPL-2.0+ >> +/* >> + * Amlogic Meson-S4 Peripherals Clock Controller Driver >> + * >> + * Copyright (c) 2021 Amlogic, inc. >> + * Author: Yu Tu <yu.tu@amlogic.com> >> + */ >> + >> +#include <linux/clk-provider.h> >> +#include <linux/of_device.h> >> +#include <linux/platform_device.h> >> + >> +#include "clk-regmap.h" >> +#include "vid-pll-div.h" >> +#include "clk-dualdiv.h" >> +#include "s4-peripherals.h" >> + >> +static struct clk_regmap s4_rtc_32k_by_oscin_clkin = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_RTC_BY_OSCIN_CTRL0, >> + .bit_idx = 31, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "rtc_32k_by_oscin_clkin", >> + .ops = &clk_regmap_gate_ops, >> + .parent_data = (const struct clk_parent_data []) { >> + { .fw_name = "xtal", } >> + }, >> + .num_parents = 1, >> + }, >> +}; >> + >> +static const struct meson_clk_dualdiv_param s4_32k_div_table[] = { >> + { >> + .dual = 1, >> + .n1 = 733, >> + .m1 = 8, >> + .n2 = 732, >> + .m2 = 11, >> + }, >> + {} >> +}; >> + >> +static struct clk_regmap s4_rtc_32k_by_oscin_div = { >> + .data = &(struct meson_clk_dualdiv_data){ >> + .n1 = { >> + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL0, >> + .shift = 0, >> + .width = 12, >> + }, >> + .n2 = { >> + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL0, >> + .shift = 12, >> + .width = 12, >> + }, >> + .m1 = { >> + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL1, >> + .shift = 0, >> + .width = 12, >> + }, >> + .m2 = { >> + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL1, >> + .shift = 12, >> + .width = 12, >> + }, >> + .dual = { >> + .reg_off = CLKCTRL_RTC_BY_OSCIN_CTRL0, >> + .shift = 28, >> + .width = 1, >> + }, >> + .table = s4_32k_div_table, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "rtc_32k_by_oscin_div", >> + .ops = &meson_clk_dualdiv_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_rtc_32k_by_oscin_clkin.hw >> + }, >> + .num_parents = 1, >> + }, >> +}; >> + >> +static struct clk_regmap s4_rtc_32k_by_oscin_sel = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_RTC_BY_OSCIN_CTRL1, >> + .mask = 0x1, >> + .shift = 24, >> + .flags = CLK_MUX_ROUND_CLOSEST, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "rtc_32k_by_oscin_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_rtc_32k_by_oscin_div.hw, >> + &s4_rtc_32k_by_oscin_clkin.hw, >> + }, >> + .num_parents = 2, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_rtc_32k_by_oscin = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_RTC_BY_OSCIN_CTRL0, >> + .bit_idx = 30, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "rtc_32k_by_oscin", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_rtc_32k_by_oscin_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +/* >> + * This RTC clock can be supplied by an external 32KHz crystal oscillator. >> + * If it is used, it should be documented in using fw_name and documented in the >> + * Bindings. Not currently in use on this board, so skip it. >> + */ >> +static u32 rtc_clk_sel[] = { 0, 1 }; > > No reason to do that I'm going to change it to static u32 rtc_clk_sel[] = { 0, 1, 2 };. I don't know if that's okay with you? > >> +static const struct clk_parent_data rtc_clk_sel_parent_data[] = { >> + { .hw = &s4_rtc_32k_by_oscin.hw }, >> + { .hw = &s4_rtc_32k_by_oscin_div.hw }, >> + { .fw_name = "ext_32k", } >> +}; >> + >> +static struct clk_regmap s4_rtc_clk = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_RTC_CTRL, >> + .mask = 0x3, >> + .shift = 0, >> + .table = rtc_clk_sel, >> + .flags = CLK_MUX_ROUND_CLOSEST, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "rtc_clk_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = rtc_clk_sel_parent_data, >> + .num_parents = 2, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +/* The index 5 is AXI_CLK, which is dedicated to AXI. So skip it. */ >> +static u32 mux_table_sys_ab_clk_sel[] = { 0, 1, 2, 3, 4, 6, 7 }; >> +static const struct clk_parent_data sys_ab_clk_parent_data[] = { >> + { .fw_name = "xtal" }, >> + { .fw_name = "fclk_div2" }, >> + { .fw_name = "fclk_div3" }, >> + { .fw_name = "fclk_div4" }, >> + { .fw_name = "fclk_div5" }, >> + { .fw_name = "fclk_div7" }, >> + { .hw = &s4_rtc_clk.hw } >> +}; >> + >> +static struct clk_regmap s4_sysclk_b_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_SYS_CLK_CTRL0, >> + .mask = 0x7, >> + .shift = 26, >> + .table = mux_table_sys_ab_clk_sel, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "sysclk_b_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = sys_ab_clk_parent_data, >> + .num_parents = ARRAY_SIZE(sys_ab_clk_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_sysclk_b_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_SYS_CLK_CTRL0, >> + .shift = 16, >> + .width = 10, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "sysclk_b_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_sysclk_b_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_sysclk_b = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_SYS_CLK_CTRL0, >> + .bit_idx = 29, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "sysclk_b", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_sysclk_b_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_sysclk_a_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_SYS_CLK_CTRL0, >> + .mask = 0x7, >> + .shift = 10, >> + .table = mux_table_sys_ab_clk_sel, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "sysclk_a_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = sys_ab_clk_parent_data, >> + .num_parents = ARRAY_SIZE(sys_ab_clk_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_sysclk_a_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_SYS_CLK_CTRL0, >> + .shift = 0, >> + .width = 10, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "sysclk_a_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_sysclk_a_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_sysclk_a = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_SYS_CLK_CTRL0, >> + .bit_idx = 13, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "sysclk_a", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_sysclk_a_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_sys_clk = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_SYS_CLK_CTRL0, >> + .mask = 0x1, >> + .shift = 31, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "sys_clk", >> + .ops = &clk_regmap_mux_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_sysclk_a.hw, >> + &s4_sysclk_b.hw >> + }, >> + .num_parents = 2, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_ceca_32k_clkin = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_CECA_CTRL0, >> + .bit_idx = 31, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "ceca_32k_clkin", >> + .ops = &clk_regmap_gate_ops, >> + .parent_data = (const struct clk_parent_data []) { >> + { .fw_name = "xtal", } >> + }, >> + .num_parents = 1, >> + }, >> +}; >> + >> +static struct clk_regmap s4_ceca_32k_div = { >> + .data = &(struct meson_clk_dualdiv_data){ >> + .n1 = { >> + .reg_off = CLKCTRL_CECA_CTRL0, >> + .shift = 0, >> + .width = 12, >> + }, >> + .n2 = { >> + .reg_off = CLKCTRL_CECA_CTRL0, >> + .shift = 12, >> + .width = 12, >> + }, >> + .m1 = { >> + .reg_off = CLKCTRL_CECA_CTRL1, >> + .shift = 0, >> + .width = 12, >> + }, >> + .m2 = { >> + .reg_off = CLKCTRL_CECA_CTRL1, >> + .shift = 12, >> + .width = 12, >> + }, >> + .dual = { >> + .reg_off = CLKCTRL_CECA_CTRL0, >> + .shift = 28, >> + .width = 1, >> + }, >> + .table = s4_32k_div_table, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "ceca_32k_div", >> + .ops = &meson_clk_dualdiv_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_ceca_32k_clkin.hw >> + }, >> + .num_parents = 1, >> + }, >> +}; >> + >> +static struct clk_regmap s4_ceca_32k_sel_pre = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_CECA_CTRL1, >> + .mask = 0x1, >> + .shift = 24, >> + .flags = CLK_MUX_ROUND_CLOSEST, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "ceca_32k_sel_pre", >> + .ops = &clk_regmap_mux_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_ceca_32k_div.hw, >> + &s4_ceca_32k_clkin.hw >> + }, >> + .num_parents = 2, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_ceca_32k_sel = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_CECA_CTRL1, >> + .mask = 0x1, >> + .shift = 31, >> + .flags = CLK_MUX_ROUND_CLOSEST, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "ceca_32k_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_ceca_32k_sel_pre.hw, >> + &s4_rtc_clk.hw >> + }, >> + .num_parents = 2, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_ceca_32k_clkout = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_CECA_CTRL0, >> + .bit_idx = 30, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "ceca_32k_clkout", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_ceca_32k_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_cecb_32k_clkin = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_CECB_CTRL0, >> + .bit_idx = 31, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "cecb_32k_clkin", >> + .ops = &clk_regmap_gate_ops, >> + .parent_data = (const struct clk_parent_data []) { >> + { .fw_name = "xtal", } >> + }, >> + .num_parents = 1, >> + }, >> +}; >> + >> +static struct clk_regmap s4_cecb_32k_div = { >> + .data = &(struct meson_clk_dualdiv_data){ >> + .n1 = { >> + .reg_off = CLKCTRL_CECB_CTRL0, >> + .shift = 0, >> + .width = 12, >> + }, >> + .n2 = { >> + .reg_off = CLKCTRL_CECB_CTRL0, >> + .shift = 12, >> + .width = 12, >> + }, >> + .m1 = { >> + .reg_off = CLKCTRL_CECB_CTRL1, >> + .shift = 0, >> + .width = 12, >> + }, >> + .m2 = { >> + .reg_off = CLKCTRL_CECB_CTRL1, >> + .shift = 12, >> + .width = 12, >> + }, >> + .dual = { >> + .reg_off = CLKCTRL_CECB_CTRL0, >> + .shift = 28, >> + .width = 1, >> + }, >> + .table = s4_32k_div_table, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "cecb_32k_div", >> + .ops = &meson_clk_dualdiv_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_cecb_32k_clkin.hw >> + }, >> + .num_parents = 1, >> + }, >> +}; >> + >> +static struct clk_regmap s4_cecb_32k_sel_pre = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_CECB_CTRL1, >> + .mask = 0x1, >> + .shift = 24, >> + .flags = CLK_MUX_ROUND_CLOSEST, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "cecb_32k_sel_pre", >> + .ops = &clk_regmap_mux_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_cecb_32k_div.hw, >> + &s4_cecb_32k_clkin.hw >> + }, >> + .num_parents = 2, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_cecb_32k_sel = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_CECB_CTRL1, >> + .mask = 0x1, >> + .shift = 31, >> + .flags = CLK_MUX_ROUND_CLOSEST, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "cecb_32k_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_cecb_32k_sel_pre.hw, >> + &s4_rtc_clk.hw >> + }, >> + .num_parents = 2, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_cecb_32k_clkout = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_CECB_CTRL0, >> + .bit_idx = 30, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "cecb_32k_clkout", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_cecb_32k_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static const struct clk_parent_data s4_sc_parent_data[] = { >> + { .fw_name = "fclk_div4" }, >> + { .fw_name = "fclk_div3" }, >> + { .fw_name = "fclk_div5" }, >> + { .fw_name = "xtal", } >> +}; >> + >> +static struct clk_regmap s4_sc_clk_mux = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_SC_CLK_CTRL, >> + .mask = 0x3, >> + .shift = 9, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "sc_clk_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_sc_parent_data, >> + .num_parents = ARRAY_SIZE(s4_sc_parent_data), >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_sc_clk_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_SC_CLK_CTRL, >> + .shift = 0, >> + .width = 8, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "sc_clk_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_sc_clk_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_sc_clk_gate = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_SC_CLK_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "sc_clk_gate", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_sc_clk_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_12_24M_clk_gate = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_CLK12_24_CTRL, >> + .bit_idx = 11, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "12_24m_gate", >> + .ops = &clk_regmap_gate_ops, >> + .parent_data = (const struct clk_parent_data []) { >> + { .fw_name = "xtal", } >> + }, >> + .num_parents = 1, >> + }, >> +}; >> + >> +static struct clk_fixed_factor s4_12M_clk_div = { >> + .mult = 1, >> + .div = 2, >> + .hw.init = &(struct clk_init_data){ >> + .name = "12M", >> + .ops = &clk_fixed_factor_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_12_24M_clk_gate.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_12_24M_clk = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_CLK12_24_CTRL, >> + .mask = 0x1, >> + .shift = 10, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "12_24m", >> + .ops = &clk_regmap_mux_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_12_24M_clk_gate.hw, >> + &s4_12M_clk_div.hw, >> + }, >> + .num_parents = 2, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +/* Video Clocks */ >> +static struct clk_regmap s4_vid_pll_div = { >> + .data = &(struct meson_vid_pll_div_data){ >> + .val = { >> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV, >> + .shift = 0, >> + .width = 15, >> + }, >> + .sel = { >> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV, >> + .shift = 16, >> + .width = 2, >> + }, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vid_pll_div", >> + /* Same to g12a */ >> + .ops = &meson_vid_pll_div_ro_ops, > > Please add an helpful explanation. > > 'Same to g12a' is not helpful. > "Because the vid_pll_div clock is a clock that does not need to change the divisor, ops only provides meson_vid_pll_div_ro_ops." I wonder if this description is ok for you? >> + .parent_data = (const struct clk_parent_data []) { >> + { .fw_name = "hdmi_pll", } >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vid_pll_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VID_PLL_CLK_DIV, >> + .mask = 0x1, >> + .shift = 18, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vid_pll_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = (const struct clk_parent_data []) { >> + { .hw = &s4_vid_pll_div.hw }, >> + { .fw_name = "hdmi_pll", } >> + }, >> + .num_parents = 2, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vid_pll = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VID_PLL_CLK_DIV, >> + .bit_idx = 19, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vid_pll", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vid_pll_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static const struct clk_parent_data s4_vclk_parent_data[] = { >> + { .hw = &s4_vid_pll.hw }, >> + { .fw_name = "gp0_pll", }, >> + { .fw_name = "hifi_pll", }, >> + { .fw_name = "mpll1", }, >> + { .fw_name = "fclk_div3", }, >> + { .fw_name = "fclk_div4", }, >> + { .fw_name = "fclk_div5", }, >> + { .fw_name = "fclk_div7", }, >> +}; >> + >> +static struct clk_regmap s4_vclk_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VID_CLK_CTRL, >> + .mask = 0x7, >> + .shift = 16, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vclk_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_vclk_parent_data, >> + .num_parents = ARRAY_SIZE(s4_vclk_parent_data), >> + }, > > You are stopping rate propagation here. > It deserves an explanation. Same goes below. "When the driver uses this clock, needs to specify the patent clock he wants in the dts." Is ok for you? > >> +}; >> + >> +static struct clk_regmap s4_vclk2_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VIID_CLK_CTRL, >> + .mask = 0x7, >> + .shift = 16, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vclk2_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_vclk_parent_data, >> + .num_parents = ARRAY_SIZE(s4_vclk_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_vclk_input = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VID_CLK_DIV, >> + .bit_idx = 16, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vclk_input", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vclk_sel.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vclk2_input = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VIID_CLK_DIV, >> + .bit_idx = 16, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vclk2_input", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2_sel.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vclk_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_VID_CLK_DIV, >> + .shift = 0, >> + .width = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vclk_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vclk_input.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vclk2_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_VIID_CLK_DIV, >> + .shift = 0, >> + .width = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vclk2_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vclk2_input.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vclk = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VID_CLK_CTRL, >> + .bit_idx = 19, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vclk", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vclk_div.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vclk2 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VIID_CLK_CTRL, >> + .bit_idx = 19, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vclk2", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2_div.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vclk_div1 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VID_CLK_CTRL, >> + .bit_idx = 0, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vclk_div1", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vclk_div2_en = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VID_CLK_CTRL, >> + .bit_idx = 1, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vclk_div2_en", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vclk_div4_en = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VID_CLK_CTRL, >> + .bit_idx = 2, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vclk_div4_en", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vclk_div6_en = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VID_CLK_CTRL, >> + .bit_idx = 3, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vclk_div6_en", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vclk_div12_en = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VID_CLK_CTRL, >> + .bit_idx = 4, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vclk_div12_en", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vclk.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vclk2_div1 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VIID_CLK_CTRL, >> + .bit_idx = 0, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vclk2_div1", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vclk2_div2_en = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VIID_CLK_CTRL, >> + .bit_idx = 1, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vclk2_div2_en", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vclk2_div4_en = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VIID_CLK_CTRL, >> + .bit_idx = 2, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vclk2_div4_en", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vclk2_div6_en = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VIID_CLK_CTRL, >> + .bit_idx = 3, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vclk2_div6_en", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vclk2_div12_en = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VIID_CLK_CTRL, >> + .bit_idx = 4, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vclk2_div12_en", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vclk2.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_fixed_factor s4_vclk_div2 = { >> + .mult = 1, >> + .div = 2, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vclk_div2", >> + .ops = &clk_fixed_factor_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vclk_div2_en.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_fixed_factor s4_vclk_div4 = { >> + .mult = 1, >> + .div = 4, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vclk_div4", >> + .ops = &clk_fixed_factor_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vclk_div4_en.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_fixed_factor s4_vclk_div6 = { >> + .mult = 1, >> + .div = 6, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vclk_div6", >> + .ops = &clk_fixed_factor_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vclk_div6_en.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_fixed_factor s4_vclk_div12 = { >> + .mult = 1, >> + .div = 12, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vclk_div12", >> + .ops = &clk_fixed_factor_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vclk_div12_en.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_fixed_factor s4_vclk2_div2 = { >> + .mult = 1, >> + .div = 2, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vclk2_div2", >> + .ops = &clk_fixed_factor_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vclk2_div2_en.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_fixed_factor s4_vclk2_div4 = { >> + .mult = 1, >> + .div = 4, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vclk2_div4", >> + .ops = &clk_fixed_factor_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vclk2_div4_en.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_fixed_factor s4_vclk2_div6 = { >> + .mult = 1, >> + .div = 6, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vclk2_div6", >> + .ops = &clk_fixed_factor_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vclk2_div6_en.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_fixed_factor s4_vclk2_div12 = { >> + .mult = 1, >> + .div = 12, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vclk2_div12", >> + .ops = &clk_fixed_factor_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vclk2_div12_en.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +/* The 5,6,7 indexes corresponds to no real clock, so there are not used. */ >> +static u32 mux_table_cts_sel[] = { 0, 1, 2, 3, 4, 8, 9, 10, 11, 12 }; >> +static const struct clk_hw *s4_cts_parent_hws[] = { >> + &s4_vclk_div1.hw, >> + &s4_vclk_div2.hw, >> + &s4_vclk_div4.hw, >> + &s4_vclk_div6.hw, >> + &s4_vclk_div12.hw, >> + &s4_vclk2_div1.hw, >> + &s4_vclk2_div2.hw, >> + &s4_vclk2_div4.hw, >> + &s4_vclk2_div6.hw, >> + &s4_vclk2_div12.hw >> +}; >> + >> +static struct clk_regmap s4_cts_enci_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VID_CLK_DIV, >> + .mask = 0xf, >> + .shift = 28, >> + .table = mux_table_cts_sel, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "cts_enci_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_hws = s4_cts_parent_hws, >> + .num_parents = ARRAY_SIZE(s4_cts_parent_hws), >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_cts_encp_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VID_CLK_DIV, >> + .mask = 0xf, >> + .shift = 20, >> + .table = mux_table_cts_sel, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "cts_encp_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_hws = s4_cts_parent_hws, >> + .num_parents = ARRAY_SIZE(s4_cts_parent_hws), >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_cts_vdac_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VIID_CLK_DIV, >> + .mask = 0xf, >> + .shift = 28, >> + .table = mux_table_cts_sel, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "cts_vdac_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_hws = s4_cts_parent_hws, >> + .num_parents = ARRAY_SIZE(s4_cts_parent_hws), >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +/* The 5,6,7 indexes corresponds to no real clock, so there are not used. */ >> +static u32 mux_table_hdmi_tx_sel[] = { 0, 1, 2, 3, 4, 8, 9, 10, 11, 12 }; >> +static const struct clk_hw *s4_cts_hdmi_tx_parent_hws[] = { >> + &s4_vclk_div1.hw, >> + &s4_vclk_div2.hw, >> + &s4_vclk_div4.hw, >> + &s4_vclk_div6.hw, >> + &s4_vclk_div12.hw, >> + &s4_vclk2_div1.hw, >> + &s4_vclk2_div2.hw, >> + &s4_vclk2_div4.hw, >> + &s4_vclk2_div6.hw, >> + &s4_vclk2_div12.hw >> +}; >> + >> +static struct clk_regmap s4_hdmi_tx_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_HDMI_CLK_CTRL, >> + .mask = 0xf, >> + .shift = 16, >> + .table = mux_table_hdmi_tx_sel, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "hdmi_tx_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_hws = s4_cts_hdmi_tx_parent_hws, >> + .num_parents = ARRAY_SIZE(s4_cts_hdmi_tx_parent_hws), >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_cts_enci = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VID_CLK_CTRL2, >> + .bit_idx = 0, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "cts_enci", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_cts_enci_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_cts_encp = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VID_CLK_CTRL2, >> + .bit_idx = 2, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "cts_encp", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_cts_encp_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_cts_vdac = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VID_CLK_CTRL2, >> + .bit_idx = 4, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "cts_vdac", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_cts_vdac_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_hdmi_tx = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VID_CLK_CTRL2, >> + .bit_idx = 5, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "hdmi_tx", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_hdmi_tx_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +/* HDMI Clocks */ >> +static const struct clk_parent_data s4_hdmi_parent_data[] = { >> + { .fw_name = "xtal", }, >> + { .fw_name = "fclk_div4", }, >> + { .fw_name = "fclk_div3", }, >> + { .fw_name = "fclk_div5", } >> +}; >> + >> +static struct clk_regmap s4_hdmi_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_HDMI_CLK_CTRL, >> + .mask = 0x3, >> + .shift = 9, >> + .flags = CLK_MUX_ROUND_CLOSEST, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "hdmi_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_hdmi_parent_data, >> + .num_parents = ARRAY_SIZE(s4_hdmi_parent_data), >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_hdmi_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_HDMI_CLK_CTRL, >> + .shift = 0, >> + .width = 7, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "hdmi_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_hdmi_sel.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_hdmi = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_HDMI_CLK_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "hdmi", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_hdmi_div.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_ts_clk_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_TS_CLK_CTRL, >> + .shift = 0, >> + .width = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "ts_clk_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_data = &(const struct clk_parent_data) { >> + .fw_name = "xtal", >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_ts_clk_gate = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_TS_CLK_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "ts_clk", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_ts_clk_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +/* >> + * The MALI IP is clocked by two identical clocks (mali_0 and mali_1) >> + * muxed by a glitch-free switch. The CCF can manage this glitch-free >> + * mux because it does top-to-bottom updates the each clock tree and >> + * switches to the "inactive" one when CLK_SET_RATE_GATE is set. >> + */ >> +static const struct clk_parent_data s4_mali_0_1_parent_data[] = { >> + { .fw_name = "xtal", }, >> + { .fw_name = "gp0_pll", }, >> + { .fw_name = "hifi_pll", }, >> + { .fw_name = "fclk_div2p5", }, >> + { .fw_name = "fclk_div3", }, >> + { .fw_name = "fclk_div4", }, >> + { .fw_name = "fclk_div5", }, >> + { .fw_name = "fclk_div7", } >> +}; >> + >> +static struct clk_regmap s4_mali_0_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_MALI_CLK_CTRL, >> + .mask = 0x7, >> + .shift = 9, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "mali_0_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_mali_0_1_parent_data, >> + .num_parents = ARRAY_SIZE(s4_mali_0_1_parent_data), >> + /* >> + * Don't request the parent to change the rate because >> + * all GPU frequencies can be derived from the fclk_* >> + * clocks and one special GP0_PLL setting. This is >> + * important because we need the MPLL clocks for audio. >> + */ >> + .flags = 0, >> + }, >> +}; >> + >> +static struct clk_regmap s4_mali_0_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_MALI_CLK_CTRL, >> + .shift = 0, >> + .width = 7, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "mali_0_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_mali_0_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_mali_0 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_MALI_CLK_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "mali_0", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_mali_0_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_mali_1_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_MALI_CLK_CTRL, >> + .mask = 0x7, >> + .shift = 25, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "mali_1_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_mali_0_1_parent_data, >> + .num_parents = ARRAY_SIZE(s4_mali_0_1_parent_data), >> + .flags = 0, >> + }, >> +}; >> + >> +static struct clk_regmap s4_mali_1_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_MALI_CLK_CTRL, >> + .shift = 16, >> + .width = 7, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "mali_1_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_mali_1_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_mali_1 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_MALI_CLK_CTRL, >> + .bit_idx = 24, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "mali_1", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_mali_1_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static const struct clk_hw *s4_mali_parent_hws[] = { >> + &s4_mali_0.hw, >> + &s4_mali_1.hw >> +}; >> + >> +static struct clk_regmap s4_mali_mux = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_MALI_CLK_CTRL, >> + .mask = 1, >> + .shift = 31, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "mali", >> + .ops = &clk_regmap_mux_ops, >> + .parent_hws = s4_mali_parent_hws, >> + .num_parents = 2, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +/* VDEC clocks */ >> +static const struct clk_parent_data s4_dec_parent_data[] = { >> + { .fw_name = "fclk_div2p5", }, >> + { .fw_name = "fclk_div3", }, >> + { .fw_name = "fclk_div4", }, >> + { .fw_name = "fclk_div5", }, >> + { .fw_name = "fclk_div7", }, >> + { .fw_name = "hifi_pll", }, >> + { .fw_name = "gp0_pll", }, >> + { .fw_name = "xtal", } >> +}; >> + >> +static struct clk_regmap s4_vdec_p0_mux = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VDEC_CLK_CTRL, >> + .mask = 0x7, >> + .shift = 9, >> + .flags = CLK_MUX_ROUND_CLOSEST, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vdec_p0_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_dec_parent_data, >> + .num_parents = ARRAY_SIZE(s4_dec_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_vdec_p0_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_VDEC_CLK_CTRL, >> + .shift = 0, >> + .width = 7, >> + .flags = CLK_DIVIDER_ROUND_CLOSEST, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vdec_p0_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vdec_p0_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vdec_p0 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VDEC_CLK_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vdec_p0", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vdec_p0_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vdec_p1_mux = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VDEC3_CLK_CTRL, >> + .mask = 0x7, >> + .shift = 9, >> + .flags = CLK_MUX_ROUND_CLOSEST, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vdec_p1_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_dec_parent_data, >> + .num_parents = ARRAY_SIZE(s4_dec_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_vdec_p1_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_VDEC3_CLK_CTRL, >> + .shift = 0, >> + .width = 7, >> + .flags = CLK_DIVIDER_ROUND_CLOSEST, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vdec_p1_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vdec_p1_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vdec_p1 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VDEC3_CLK_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vdec_p1", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vdec_p1_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static const struct clk_hw *s4_vdec_mux_parent_hws[] = { >> + &s4_vdec_p0.hw, >> + &s4_vdec_p1.hw >> +}; >> + >> +static struct clk_regmap s4_vdec_mux = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VDEC3_CLK_CTRL, >> + .mask = 0x1, >> + .shift = 15, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vdec_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_hws = s4_vdec_mux_parent_hws, >> + .num_parents = ARRAY_SIZE(s4_vdec_mux_parent_hws), >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_hevcf_p0_mux = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VDEC2_CLK_CTRL, >> + .mask = 0x7, >> + .shift = 9, >> + .flags = CLK_MUX_ROUND_CLOSEST, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "hevcf_p0_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_dec_parent_data, >> + .num_parents = ARRAY_SIZE(s4_dec_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_hevcf_p0_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_VDEC2_CLK_CTRL, >> + .shift = 0, >> + .width = 7, >> + .flags = CLK_DIVIDER_ROUND_CLOSEST, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "hevcf_p0_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_hevcf_p0_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_hevcf_p0 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VDEC2_CLK_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "hevcf_p0_gate", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_hevcf_p0_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_hevcf_p1_mux = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VDEC4_CLK_CTRL, >> + .mask = 0x7, >> + .shift = 9, >> + .flags = CLK_MUX_ROUND_CLOSEST, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "hevcf_p1_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_dec_parent_data, >> + .num_parents = ARRAY_SIZE(s4_dec_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_hevcf_p1_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_VDEC4_CLK_CTRL, >> + .shift = 0, >> + .width = 7, >> + .flags = CLK_DIVIDER_ROUND_CLOSEST, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "hevcf_p1_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_hevcf_p1_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_hevcf_p1 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VDEC4_CLK_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "hevcf_p1", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_hevcf_p1_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static const struct clk_hw *s4_hevcf_mux_parent_hws[] = { >> + &s4_hevcf_p0.hw, >> + &s4_hevcf_p1.hw >> +}; >> + >> +static struct clk_regmap s4_hevcf_mux = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VDEC4_CLK_CTRL, >> + .mask = 0x1, >> + .shift = 15, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "hevcf", >> + .ops = &clk_regmap_mux_ops, >> + .parent_hws = s4_hevcf_mux_parent_hws, >> + .num_parents = ARRAY_SIZE(s4_hevcf_mux_parent_hws), >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +/* VPU Clock */ >> +static const struct clk_parent_data s4_vpu_parent_data[] = { >> + { .fw_name = "fclk_div3", }, >> + { .fw_name = "fclk_div4", }, >> + { .fw_name = "fclk_div5", }, >> + { .fw_name = "fclk_div7", }, >> + { .fw_name = "mpll1", }, >> + { .hw = &s4_vid_pll.hw }, >> + { .fw_name = "hifi_pll", }, >> + { .fw_name = "gp0_pll", }, >> +}; >> + >> +static struct clk_regmap s4_vpu_0_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VPU_CLK_CTRL, >> + .mask = 0x7, >> + .shift = 9, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vpu_0_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_vpu_parent_data, >> + .num_parents = ARRAY_SIZE(s4_vpu_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_vpu_0_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_VPU_CLK_CTRL, >> + .shift = 0, >> + .width = 7, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vpu_0_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vpu_0_sel.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vpu_0 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VPU_CLK_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vpu_0", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vpu_0_div.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vpu_1_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VPU_CLK_CTRL, >> + .mask = 0x7, >> + .shift = 25, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vpu_1_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_vpu_parent_data, >> + .num_parents = ARRAY_SIZE(s4_vpu_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_vpu_1_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_VPU_CLK_CTRL, >> + .shift = 16, >> + .width = 7, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vpu_1_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vpu_1_sel.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vpu_1 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VPU_CLK_CTRL, >> + .bit_idx = 24, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vpu_1", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vpu_1_div.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vpu = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VPU_CLK_CTRL, >> + .mask = 1, >> + .shift = 31, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vpu", >> + .ops = &clk_regmap_mux_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vpu_0.hw, >> + &s4_vpu_1.hw, >> + }, >> + .num_parents = 2, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static const struct clk_parent_data vpu_clkb_tmp_parent_data[] = { >> + { .hw = &s4_vpu.hw }, >> + { .fw_name = "fclk_div4", }, >> + { .fw_name = "fclk_div5", }, >> + { .fw_name = "fclk_div7", } >> +}; >> + >> +static struct clk_regmap s4_vpu_clkb_tmp_mux = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VPU_CLKB_CTRL, >> + .mask = 0x3, >> + .shift = 20, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vpu_clkb_tmp_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = vpu_clkb_tmp_parent_data, >> + .num_parents = ARRAY_SIZE(vpu_clkb_tmp_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_vpu_clkb_tmp_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_VPU_CLKB_CTRL, >> + .shift = 16, >> + .width = 4, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vpu_clkb_tmp_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vpu_clkb_tmp_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vpu_clkb_tmp = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VPU_CLKB_CTRL, >> + .bit_idx = 24, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vpu_clkb_tmp", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vpu_clkb_tmp_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vpu_clkb_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_VPU_CLKB_CTRL, >> + .shift = 0, >> + .width = 8, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vpu_clkb_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vpu_clkb_tmp.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vpu_clkb = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VPU_CLKB_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vpu_clkb", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vpu_clkb_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static const struct clk_parent_data s4_vpu_clkc_parent_data[] = { >> + { .fw_name = "fclk_div4", }, >> + { .fw_name = "fclk_div3", }, >> + { .fw_name = "fclk_div5", }, >> + { .fw_name = "fclk_div7", }, >> + { .fw_name = "mpll1", }, >> + { .hw = &s4_vid_pll.hw }, >> + { .fw_name = "mpll2", }, >> + { .fw_name = "gp0_pll", }, >> +}; >> + >> +static struct clk_regmap s4_vpu_clkc_p0_mux = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VPU_CLKC_CTRL, >> + .mask = 0x7, >> + .shift = 9, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vpu_clkc_p0_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_vpu_clkc_parent_data, >> + .num_parents = ARRAY_SIZE(s4_vpu_clkc_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_vpu_clkc_p0_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_VPU_CLKC_CTRL, >> + .shift = 0, >> + .width = 7, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vpu_clkc_p0_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vpu_clkc_p0_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vpu_clkc_p0 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VPU_CLKC_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vpu_clkc_p0", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vpu_clkc_p0_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vpu_clkc_p1_mux = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VPU_CLKC_CTRL, >> + .mask = 0x7, >> + .shift = 25, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vpu_clkc_p1_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_vpu_clkc_parent_data, >> + .num_parents = ARRAY_SIZE(s4_vpu_clkc_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_vpu_clkc_p1_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_VPU_CLKC_CTRL, >> + .shift = 16, >> + .width = 7, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vpu_clkc_p1_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vpu_clkc_p1_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vpu_clkc_p1 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VPU_CLKC_CTRL, >> + .bit_idx = 24, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vpu_clkc_p1", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vpu_clkc_p1_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static const struct clk_hw *s4_vpu_mux_parent_hws[] = { >> + &s4_vpu_clkc_p0.hw, >> + &s4_vpu_clkc_p1.hw >> +}; >> + >> +static struct clk_regmap s4_vpu_clkc_mux = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VPU_CLKC_CTRL, >> + .mask = 0x1, >> + .shift = 31, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vpu_clkc_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_hws = s4_vpu_mux_parent_hws, >> + .num_parents = ARRAY_SIZE(s4_vpu_mux_parent_hws), >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +/* VAPB Clock */ >> +static const struct clk_parent_data s4_vapb_parent_data[] = { >> + { .fw_name = "fclk_div4", }, >> + { .fw_name = "fclk_div3", }, >> + { .fw_name = "fclk_div5", }, >> + { .fw_name = "fclk_div7", }, >> + { .fw_name = "mpll1", }, >> + { .hw = &s4_vid_pll.hw }, >> + { .fw_name = "mpll2", }, >> + { .fw_name = "fclk_div2p5", }, >> +}; >> + >> +static struct clk_regmap s4_vapb_0_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VAPBCLK_CTRL, >> + .mask = 0x7, >> + .shift = 9, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vapb_0_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_vapb_parent_data, >> + .num_parents = ARRAY_SIZE(s4_vapb_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_vapb_0_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_VAPBCLK_CTRL, >> + .shift = 0, >> + .width = 7, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vapb_0_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vapb_0_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vapb_0 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VAPBCLK_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vapb_0", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vapb_0_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vapb_1_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VAPBCLK_CTRL, >> + .mask = 0x7, >> + .shift = 25, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vapb_1_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_vapb_parent_data, >> + .num_parents = ARRAY_SIZE(s4_vapb_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_vapb_1_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_VAPBCLK_CTRL, >> + .shift = 16, >> + .width = 7, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vapb_1_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vapb_1_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vapb_1 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VAPBCLK_CTRL, >> + .bit_idx = 24, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vapb_1", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vapb_1_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vapb = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VAPBCLK_CTRL, >> + .mask = 1, >> + .shift = 31, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vapb_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vapb_0.hw, >> + &s4_vapb_1.hw >> + }, >> + .num_parents = 2, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_ge2d_gate = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VAPBCLK_CTRL, >> + .bit_idx = 30, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "ge2d_clk", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { &s4_vapb.hw }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static const struct clk_parent_data s4_esmclk_parent_data[] = { >> + { .fw_name = "fclk_div7", }, >> + { .fw_name = "fclk_div4", }, >> + { .fw_name = "fclk_div3", }, >> + { .fw_name = "fclk_div5", }, >> +}; >> + >> +static struct clk_regmap s4_hdcp22_esmclk_mux = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_HDCP22_CTRL, >> + .mask = 0x3, >> + .shift = 9, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "hdcp22_esmclk_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_esmclk_parent_data, >> + .num_parents = ARRAY_SIZE(s4_esmclk_parent_data), >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_hdcp22_esmclk_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_HDCP22_CTRL, >> + .shift = 0, >> + .width = 7, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "hdcp22_esmclk_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_hdcp22_esmclk_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_hdcp22_esmclk_gate = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_HDCP22_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "hdcp22_esmclk_gate", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_hdcp22_esmclk_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static const struct clk_parent_data s4_skpclk_parent_data[] = { >> + { .fw_name = "xtal", }, >> + { .fw_name = "fclk_div4", }, >> + { .fw_name = "fclk_div3", }, >> + { .fw_name = "fclk_div5", }, >> +}; >> + >> +static struct clk_regmap s4_hdcp22_skpclk_mux = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_HDCP22_CTRL, >> + .mask = 0x3, >> + .shift = 25, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "hdcp22_skpclk_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_skpclk_parent_data, >> + .num_parents = ARRAY_SIZE(s4_skpclk_parent_data), >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_hdcp22_skpclk_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_HDCP22_CTRL, >> + .shift = 16, >> + .width = 7, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "hdcp22_skpclk_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_hdcp22_skpclk_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_hdcp22_skpclk_gate = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_HDCP22_CTRL, >> + .bit_idx = 24, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "hdcp22_skpclk_gate", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_hdcp22_skpclk_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static const struct clk_parent_data s4_vdin_parent_data[] = { >> + { .fw_name = "xtal", }, >> + { .fw_name = "fclk_div4", }, >> + { .fw_name = "fclk_div3", }, >> + { .fw_name = "fclk_div5", }, >> + { .hw = &s4_vid_pll.hw } >> +}; >> + >> +static struct clk_regmap s4_vdin_meas_mux = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_VDIN_MEAS_CLK_CTRL, >> + .mask = 0x7, >> + .shift = 9, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vdin_meas_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_vdin_parent_data, >> + .num_parents = ARRAY_SIZE(s4_vdin_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_vdin_meas_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_VDIN_MEAS_CLK_CTRL, >> + .shift = 0, >> + .width = 7, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "vdin_meas_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vdin_meas_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_vdin_meas_gate = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_VDIN_MEAS_CLK_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "vdin_meas_gate", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_vdin_meas_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +/* EMMC/NAND clock */ >> +static const struct clk_parent_data s4_sd_emmc_clk0_parent_data[] = { >> + { .fw_name = "xtal", }, >> + { .fw_name = "fclk_div2", }, >> + { .fw_name = "fclk_div3", }, >> + { .fw_name = "hifi_pll", }, >> + { .fw_name = "fclk_div2p5", }, >> + { .fw_name = "mpll2", }, >> + { .fw_name = "mpll3", }, >> + { .fw_name = "gp0_pll", }, >> +}; >> + >> +static struct clk_regmap s4_sd_emmc_c_clk0_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_NAND_CLK_CTRL, >> + .mask = 0x7, >> + .shift = 9, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "sd_emmc_c_clk0_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_sd_emmc_clk0_parent_data, >> + .num_parents = ARRAY_SIZE(s4_sd_emmc_clk0_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_sd_emmc_c_clk0_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_NAND_CLK_CTRL, >> + .shift = 0, >> + .width = 7, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "sd_emmc_c_clk0_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_sd_emmc_c_clk0_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_sd_emmc_c_clk0 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_NAND_CLK_CTRL, >> + .bit_idx = 7, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "sd_emmc_c_clk0", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_sd_emmc_c_clk0_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_sd_emmc_a_clk0_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, >> + .mask = 0x7, >> + .shift = 9, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "sd_emmc_a_clk0_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_sd_emmc_clk0_parent_data, >> + .num_parents = ARRAY_SIZE(s4_sd_emmc_clk0_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_sd_emmc_a_clk0_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, >> + .shift = 0, >> + .width = 7, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "sd_emmc_a_clk0_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_sd_emmc_a_clk0_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_sd_emmc_a_clk0 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, >> + .bit_idx = 7, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "sd_emmc_a_clk0", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_sd_emmc_a_clk0_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_sd_emmc_b_clk0_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, >> + .mask = 0x7, >> + .shift = 25, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "sd_emmc_b_clk0_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_sd_emmc_clk0_parent_data, >> + .num_parents = ARRAY_SIZE(s4_sd_emmc_clk0_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_sd_emmc_b_clk0_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, >> + .shift = 16, >> + .width = 7, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "sd_emmc_b_clk0_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_sd_emmc_b_clk0_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_sd_emmc_b_clk0 = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_SD_EMMC_CLK_CTRL, >> + .bit_idx = 23, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "sd_emmc_b_clk0", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_sd_emmc_b_clk0_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +/* SPICC Clock */ >> +static const struct clk_parent_data s4_spicc_parent_data[] = { >> + { .fw_name = "xtal", }, >> + { .hw = &s4_sys_clk.hw }, >> + { .fw_name = "fclk_div4", }, >> + { .fw_name = "fclk_div3", }, >> + { .fw_name = "fclk_div2", }, >> + { .fw_name = "fclk_div5", }, >> + { .fw_name = "fclk_div7", }, >> +}; >> + >> +static struct clk_regmap s4_spicc0_mux = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_SPICC_CLK_CTRL, >> + .mask = 0x7, >> + .shift = 7, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "spicc0_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_spicc_parent_data, >> + .num_parents = ARRAY_SIZE(s4_spicc_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_spicc0_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_SPICC_CLK_CTRL, >> + .shift = 0, >> + .width = 6, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "spicc0_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_spicc0_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_spicc0_gate = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_SPICC_CLK_CTRL, >> + .bit_idx = 6, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "spicc0", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_spicc0_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +/* PWM Clock */ >> +static const struct clk_parent_data s4_pwm_parent_data[] = { >> + { .fw_name = "xtal", }, >> + { .hw = &s4_vid_pll.hw }, >> + { .fw_name = "fclk_div4", }, >> + { .fw_name = "fclk_div3", }, >> +}; >> + >> +static struct clk_regmap s4_pwm_a_mux = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_PWM_CLK_AB_CTRL, >> + .mask = 0x3, >> + .shift = 9, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_a_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_pwm_parent_data, >> + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_a_div = { >> + .data = &(struct clk_regmap_div_data) { >> + .offset = CLKCTRL_PWM_CLK_AB_CTRL, >> + .shift = 0, >> + .width = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_a_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_a_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_a_gate = { >> + .data = &(struct clk_regmap_gate_data) { >> + .offset = CLKCTRL_PWM_CLK_AB_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_a_gate", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_a_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_b_mux = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_PWM_CLK_AB_CTRL, >> + .mask = 0x3, >> + .shift = 25, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_b_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_pwm_parent_data, >> + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_b_div = { >> + .data = &(struct clk_regmap_div_data) { >> + .offset = CLKCTRL_PWM_CLK_AB_CTRL, >> + .shift = 16, >> + .width = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_b_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_b_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_b_gate = { >> + .data = &(struct clk_regmap_gate_data) { >> + .offset = CLKCTRL_PWM_CLK_AB_CTRL, >> + .bit_idx = 24, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_b_gate", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_b_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_c_mux = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_PWM_CLK_CD_CTRL, >> + .mask = 0x3, >> + .shift = 9, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_c_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_pwm_parent_data, >> + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_c_div = { >> + .data = &(struct clk_regmap_div_data) { >> + .offset = CLKCTRL_PWM_CLK_CD_CTRL, >> + .shift = 0, >> + .width = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_c_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_c_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_c_gate = { >> + .data = &(struct clk_regmap_gate_data) { >> + .offset = CLKCTRL_PWM_CLK_CD_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_c_gate", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_c_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_d_mux = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_PWM_CLK_CD_CTRL, >> + .mask = 0x3, >> + .shift = 25, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_d_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_pwm_parent_data, >> + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_d_div = { >> + .data = &(struct clk_regmap_div_data) { >> + .offset = CLKCTRL_PWM_CLK_CD_CTRL, >> + .shift = 16, >> + .width = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_d_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_d_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_d_gate = { >> + .data = &(struct clk_regmap_gate_data) { >> + .offset = CLKCTRL_PWM_CLK_CD_CTRL, >> + .bit_idx = 24, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_d_gate", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_d_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_e_mux = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_PWM_CLK_EF_CTRL, >> + .mask = 0x3, >> + .shift = 9, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_e_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_pwm_parent_data, >> + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_e_div = { >> + .data = &(struct clk_regmap_div_data) { >> + .offset = CLKCTRL_PWM_CLK_EF_CTRL, >> + .shift = 0, >> + .width = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_e_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_e_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_e_gate = { >> + .data = &(struct clk_regmap_gate_data) { >> + .offset = CLKCTRL_PWM_CLK_EF_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_e_gate", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_e_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_f_mux = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_PWM_CLK_EF_CTRL, >> + .mask = 0x3, >> + .shift = 25, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_f_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_pwm_parent_data, >> + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_f_div = { >> + .data = &(struct clk_regmap_div_data) { >> + .offset = CLKCTRL_PWM_CLK_EF_CTRL, >> + .shift = 16, >> + .width = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_f_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_f_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_f_gate = { >> + .data = &(struct clk_regmap_gate_data) { >> + .offset = CLKCTRL_PWM_CLK_EF_CTRL, >> + .bit_idx = 24, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_f_gate", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_f_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_g_mux = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_PWM_CLK_GH_CTRL, >> + .mask = 0x3, >> + .shift = 9, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_g_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_pwm_parent_data, >> + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_g_div = { >> + .data = &(struct clk_regmap_div_data) { >> + .offset = CLKCTRL_PWM_CLK_GH_CTRL, >> + .shift = 0, >> + .width = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_g_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_g_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_g_gate = { >> + .data = &(struct clk_regmap_gate_data) { >> + .offset = CLKCTRL_PWM_CLK_GH_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_g_gate", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_g_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_h_mux = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_PWM_CLK_GH_CTRL, >> + .mask = 0x3, >> + .shift = 25, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_h_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_pwm_parent_data, >> + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_h_div = { >> + .data = &(struct clk_regmap_div_data) { >> + .offset = CLKCTRL_PWM_CLK_GH_CTRL, >> + .shift = 16, >> + .width = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_h_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_h_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_h_gate = { >> + .data = &(struct clk_regmap_gate_data) { >> + .offset = CLKCTRL_PWM_CLK_GH_CTRL, >> + .bit_idx = 24, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_h_gate", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_h_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_i_mux = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, >> + .mask = 0x3, >> + .shift = 9, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_i_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_pwm_parent_data, >> + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_i_div = { >> + .data = &(struct clk_regmap_div_data) { >> + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, >> + .shift = 0, >> + .width = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_i_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_i_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_i_gate = { >> + .data = &(struct clk_regmap_gate_data) { >> + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_i_gate", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_i_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_j_mux = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, >> + .mask = 0x3, >> + .shift = 25, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_j_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_pwm_parent_data, >> + .num_parents = ARRAY_SIZE(s4_pwm_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_j_div = { >> + .data = &(struct clk_regmap_div_data) { >> + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, >> + .shift = 16, >> + .width = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_j_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_h_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_pwm_j_gate = { >> + .data = &(struct clk_regmap_gate_data) { >> + .offset = CLKCTRL_PWM_CLK_IJ_CTRL, >> + .bit_idx = 24, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "pwm_j_gate", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_pwm_j_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_saradc_mux = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_SAR_CLK_CTRL, >> + .mask = 0x3, >> + .shift = 9, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "saradc_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = (const struct clk_parent_data []) { >> + { .fw_name = "xtal", }, >> + { .hw = &s4_sys_clk.hw }, >> + }, >> + .num_parents = 2, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_saradc_div = { >> + .data = &(struct clk_regmap_div_data) { >> + .offset = CLKCTRL_SAR_CLK_CTRL, >> + .shift = 0, >> + .width = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "saradc_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_saradc_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_saradc_gate = { >> + .data = &(struct clk_regmap_gate_data) { >> + .offset = CLKCTRL_SAR_CLK_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "saradc_clk", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_saradc_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +/* >> + * gen clk is designed for debug/monitor some internal clock quality. Some of the >> + * corresponding clock sources are not described in the clock tree and internal clock >> + * for debug, so they are skipped. >> + */ >> +static u32 s4_gen_clk_mux_table[] = { 0, 4, 5, 7, 19, 21, 22, >> + 23, 24, 25, 26, 27, 28 }; >> +static const struct clk_parent_data s4_gen_clk_parent_data[] = { >> + { .fw_name = "xtal", }, >> + { .hw = &s4_vid_pll.hw }, >> + { .fw_name = "gp0_pll", }, >> + { .fw_name = "hifi_pll", }, >> + { .fw_name = "fclk_div2", }, >> + { .fw_name = "fclk_div3", }, >> + { .fw_name = "fclk_div4", }, >> + { .fw_name = "fclk_div5", }, >> + { .fw_name = "fclk_div7", }, >> + { .fw_name = "mpll0", }, >> + { .fw_name = "mpll1", }, >> + { .fw_name = "mpll2", }, >> + { .fw_name = "mpll3", }, >> +}; >> + >> +static struct clk_regmap s4_gen_clk_sel = { >> + .data = &(struct clk_regmap_mux_data){ >> + .offset = CLKCTRL_GEN_CLK_CTRL, >> + .mask = 0x1f, >> + .shift = 12, >> + .table = s4_gen_clk_mux_table, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "gen_clk_sel", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_gen_clk_parent_data, >> + .num_parents = ARRAY_SIZE(s4_gen_clk_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_gen_clk_div = { >> + .data = &(struct clk_regmap_div_data){ >> + .offset = CLKCTRL_GEN_CLK_CTRL, >> + .shift = 0, >> + .width = 11, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "gen_clk_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_gen_clk_sel.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_gen_clk = { >> + .data = &(struct clk_regmap_gate_data){ >> + .offset = CLKCTRL_GEN_CLK_CTRL, >> + .bit_idx = 11, >> + }, >> + .hw.init = &(struct clk_init_data) { >> + .name = "gen_clk", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_gen_clk_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE, >> + }, >> +}; >> + >> +static const struct clk_parent_data s4_adc_extclk_in_parent_data[] = { >> + { .fw_name = "xtal", }, >> + { .fw_name = "fclk_div4", }, >> + { .fw_name = "fclk_div3", }, >> + { .fw_name = "fclk_div5", }, >> + { .fw_name = "fclk_div7", }, >> + { .fw_name = "mpll2", }, >> + { .fw_name = "gp0_pll", }, >> + { .fw_name = "hifi_pll", }, >> +}; >> + >> +static struct clk_regmap s4_adc_extclk_in_mux = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_DEMOD_CLK_CTRL, >> + .mask = 0x7, >> + .shift = 25, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "adc_extclk_in_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = s4_adc_extclk_in_parent_data, >> + .num_parents = ARRAY_SIZE(s4_adc_extclk_in_parent_data), >> + }, >> +}; >> + >> +static struct clk_regmap s4_adc_extclk_in_div = { >> + .data = &(struct clk_regmap_div_data) { >> + .offset = CLKCTRL_DEMOD_CLK_CTRL, >> + .shift = 16, >> + .width = 7, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "adc_extclk_in_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_adc_extclk_in_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_adc_extclk_in_gate = { >> + .data = &(struct clk_regmap_gate_data) { >> + .offset = CLKCTRL_DEMOD_CLK_CTRL, >> + .bit_idx = 24, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "adc_extclk_in", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_adc_extclk_in_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_demod_core_clk_mux = { >> + .data = &(struct clk_regmap_mux_data) { >> + .offset = CLKCTRL_DEMOD_CLK_CTRL, >> + .mask = 0x3, >> + .shift = 9, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "demod_core_clk_mux", >> + .ops = &clk_regmap_mux_ops, >> + .parent_data = (const struct clk_parent_data []) { >> + { .fw_name = "xtal", }, >> + { .fw_name = "fclk_div7", }, >> + { .fw_name = "fclk_div4", }, >> + { .hw = &s4_adc_extclk_in_gate.hw } >> + }, >> + .num_parents = 4, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_demod_core_clk_div = { >> + .data = &(struct clk_regmap_div_data) { >> + .offset = CLKCTRL_DEMOD_CLK_CTRL, >> + .shift = 0, >> + .width = 7, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "demod_core_clk_div", >> + .ops = &clk_regmap_divider_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_demod_core_clk_mux.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +static struct clk_regmap s4_demod_core_clk_gate = { >> + .data = &(struct clk_regmap_gate_data) { >> + .offset = CLKCTRL_DEMOD_CLK_CTRL, >> + .bit_idx = 8, >> + }, >> + .hw.init = &(struct clk_init_data){ >> + .name = "demod_core_clk", >> + .ops = &clk_regmap_gate_ops, >> + .parent_hws = (const struct clk_hw *[]) { >> + &s4_demod_core_clk_div.hw >> + }, >> + .num_parents = 1, >> + .flags = CLK_SET_RATE_PARENT, >> + }, >> +}; >> + >> +#define MESON_GATE(_name, _reg, _bit) \ >> + MESON_PCLK(_name, _reg, _bit, &s4_sys_clk.hw) >> + >> +static MESON_GATE(s4_ddr, CLKCTRL_SYS_CLK_EN0_REG0, 0); >> +static MESON_GATE(s4_dos, CLKCTRL_SYS_CLK_EN0_REG0, 1); >> +static MESON_GATE(s4_ethphy, CLKCTRL_SYS_CLK_EN0_REG0, 4); >> +static MESON_GATE(s4_mali, CLKCTRL_SYS_CLK_EN0_REG0, 6); >> +static MESON_GATE(s4_aocpu, CLKCTRL_SYS_CLK_EN0_REG0, 13); >> +static MESON_GATE(s4_aucpu, CLKCTRL_SYS_CLK_EN0_REG0, 14); >> +static MESON_GATE(s4_cec, CLKCTRL_SYS_CLK_EN0_REG0, 16); >> +static MESON_GATE(s4_sdemmca, CLKCTRL_SYS_CLK_EN0_REG0, 24); >> +static MESON_GATE(s4_sdemmcb, CLKCTRL_SYS_CLK_EN0_REG0, 25); >> +static MESON_GATE(s4_nand, CLKCTRL_SYS_CLK_EN0_REG0, 26); >> +static MESON_GATE(s4_smartcard, CLKCTRL_SYS_CLK_EN0_REG0, 27); >> +static MESON_GATE(s4_acodec, CLKCTRL_SYS_CLK_EN0_REG0, 28); >> +static MESON_GATE(s4_spifc, CLKCTRL_SYS_CLK_EN0_REG0, 29); >> +static MESON_GATE(s4_msr_clk, CLKCTRL_SYS_CLK_EN0_REG0, 30); >> +static MESON_GATE(s4_ir_ctrl, CLKCTRL_SYS_CLK_EN0_REG0, 31); >> +static MESON_GATE(s4_audio, CLKCTRL_SYS_CLK_EN0_REG1, 0); >> +static MESON_GATE(s4_eth, CLKCTRL_SYS_CLK_EN0_REG1, 3); >> +static MESON_GATE(s4_uart_a, CLKCTRL_SYS_CLK_EN0_REG1, 5); >> +static MESON_GATE(s4_uart_b, CLKCTRL_SYS_CLK_EN0_REG1, 6); >> +static MESON_GATE(s4_uart_c, CLKCTRL_SYS_CLK_EN0_REG1, 7); >> +static MESON_GATE(s4_uart_d, CLKCTRL_SYS_CLK_EN0_REG1, 8); >> +static MESON_GATE(s4_uart_e, CLKCTRL_SYS_CLK_EN0_REG1, 9); >> +static MESON_GATE(s4_aififo, CLKCTRL_SYS_CLK_EN0_REG1, 11); >> +static MESON_GATE(s4_ts_ddr, CLKCTRL_SYS_CLK_EN0_REG1, 15); >> +static MESON_GATE(s4_ts_pll, CLKCTRL_SYS_CLK_EN0_REG1, 16); >> +static MESON_GATE(s4_g2d, CLKCTRL_SYS_CLK_EN0_REG1, 20); >> +static MESON_GATE(s4_spicc0, CLKCTRL_SYS_CLK_EN0_REG1, 21); >> +static MESON_GATE(s4_usb, CLKCTRL_SYS_CLK_EN0_REG1, 26); >> +static MESON_GATE(s4_i2c_m_a, CLKCTRL_SYS_CLK_EN0_REG1, 30); >> +static MESON_GATE(s4_i2c_m_b, CLKCTRL_SYS_CLK_EN0_REG1, 31); >> +static MESON_GATE(s4_i2c_m_c, CLKCTRL_SYS_CLK_EN0_REG2, 0); >> +static MESON_GATE(s4_i2c_m_d, CLKCTRL_SYS_CLK_EN0_REG2, 1); >> +static MESON_GATE(s4_i2c_m_e, CLKCTRL_SYS_CLK_EN0_REG2, 2); >> +static MESON_GATE(s4_hdmitx_apb, CLKCTRL_SYS_CLK_EN0_REG2, 4); >> +static MESON_GATE(s4_i2c_s_a, CLKCTRL_SYS_CLK_EN0_REG2, 5); >> +static MESON_GATE(s4_usb1_to_ddr, CLKCTRL_SYS_CLK_EN0_REG2, 8); >> +static MESON_GATE(s4_hdcp22, CLKCTRL_SYS_CLK_EN0_REG2, 10); >> +static MESON_GATE(s4_mmc_apb, CLKCTRL_SYS_CLK_EN0_REG2, 11); >> +static MESON_GATE(s4_rsa, CLKCTRL_SYS_CLK_EN0_REG2, 18); >> +static MESON_GATE(s4_cpu_debug, CLKCTRL_SYS_CLK_EN0_REG2, 19); >> +static MESON_GATE(s4_vpu_intr, CLKCTRL_SYS_CLK_EN0_REG2, 25); >> +static MESON_GATE(s4_demod, CLKCTRL_SYS_CLK_EN0_REG2, 27); >> +static MESON_GATE(s4_sar_adc, CLKCTRL_SYS_CLK_EN0_REG2, 28); >> +static MESON_GATE(s4_gic, CLKCTRL_SYS_CLK_EN0_REG2, 30); >> +static MESON_GATE(s4_pwm_ab, CLKCTRL_SYS_CLK_EN0_REG3, 7); >> +static MESON_GATE(s4_pwm_cd, CLKCTRL_SYS_CLK_EN0_REG3, 8); >> +static MESON_GATE(s4_pwm_ef, CLKCTRL_SYS_CLK_EN0_REG3, 9); >> +static MESON_GATE(s4_pwm_gh, CLKCTRL_SYS_CLK_EN0_REG3, 10); >> +static MESON_GATE(s4_pwm_ij, CLKCTRL_SYS_CLK_EN0_REG3, 11); >> + >> +/* Array of all clocks provided by this provider */ >> +static struct clk_hw_onecell_data s4_periphs_hw_onecell_data = { >> + .hws = { >> + [CLKID_RTC_32K_CLKIN] = &s4_rtc_32k_by_oscin_clkin.hw, >> + [CLKID_RTC_32K_DIV] = &s4_rtc_32k_by_oscin_div.hw, >> + [CLKID_RTC_32K_SEL] = &s4_rtc_32k_by_oscin_sel.hw, >> + [CLKID_RTC_32K_XATL] = &s4_rtc_32k_by_oscin.hw, >> + [CLKID_RTC_CLK] = &s4_rtc_clk.hw, >> + [CLKID_SYS_CLK_B_SEL] = &s4_sysclk_b_sel.hw, >> + [CLKID_SYS_CLK_B_DIV] = &s4_sysclk_b_div.hw, >> + [CLKID_SYS_CLK_B_GATE] = &s4_sysclk_b.hw, >> + [CLKID_SYS_CLK_A_SEL] = &s4_sysclk_a_sel.hw, >> + [CLKID_SYS_CLK_A_DIV] = &s4_sysclk_a_div.hw, >> + [CLKID_SYS_CLK_A_GATE] = &s4_sysclk_a.hw, >> + [CLKID_SYS_CLK] = &s4_sys_clk.hw, >> + [CLKID_CECA_32K_CLKIN] = &s4_ceca_32k_clkin.hw, >> + [CLKID_CECA_32K_DIV] = &s4_ceca_32k_div.hw, >> + [CLKID_CECA_32K_SEL_PRE] = &s4_ceca_32k_sel_pre.hw, >> + [CLKID_CECA_32K_SEL] = &s4_ceca_32k_sel.hw, >> + [CLKID_CECA_32K_CLKOUT] = &s4_ceca_32k_clkout.hw, >> + [CLKID_CECB_32K_CLKIN] = &s4_cecb_32k_clkin.hw, >> + [CLKID_CECB_32K_DIV] = &s4_cecb_32k_div.hw, >> + [CLKID_CECB_32K_SEL_PRE] = &s4_cecb_32k_sel_pre.hw, >> + [CLKID_CECB_32K_SEL] = &s4_cecb_32k_sel.hw, >> + [CLKID_CECB_32K_CLKOUT] = &s4_cecb_32k_clkout.hw, >> + [CLKID_SC_CLK_SEL] = &s4_sc_clk_mux.hw, >> + [CLKID_SC_CLK_DIV] = &s4_sc_clk_div.hw, >> + [CLKID_SC_CLK_GATE] = &s4_sc_clk_gate.hw, >> + [CLKID_12_24M_CLK_GATE] = &s4_12_24M_clk_gate.hw, >> + [CLKID_12M_CLK_DIV] = &s4_12M_clk_div.hw, >> + [CLKID_12_24M_CLK_SEL] = &s4_12_24M_clk.hw, >> + [CLKID_VID_PLL_DIV] = &s4_vid_pll_div.hw, >> + [CLKID_VID_PLL_SEL] = &s4_vid_pll_sel.hw, >> + [CLKID_VID_PLL] = &s4_vid_pll.hw, >> + [CLKID_VCLK_SEL] = &s4_vclk_sel.hw, >> + [CLKID_VCLK2_SEL] = &s4_vclk2_sel.hw, >> + [CLKID_VCLK_INPUT] = &s4_vclk_input.hw, >> + [CLKID_VCLK2_INPUT] = &s4_vclk2_input.hw, >> + [CLKID_VCLK_DIV] = &s4_vclk_div.hw, >> + [CLKID_VCLK2_DIV] = &s4_vclk2_div.hw, >> + [CLKID_VCLK] = &s4_vclk.hw, >> + [CLKID_VCLK2] = &s4_vclk2.hw, >> + [CLKID_VCLK_DIV1] = &s4_vclk_div1.hw, >> + [CLKID_VCLK_DIV2_EN] = &s4_vclk_div2_en.hw, >> + [CLKID_VCLK_DIV4_EN] = &s4_vclk_div4_en.hw, >> + [CLKID_VCLK_DIV6_EN] = &s4_vclk_div6_en.hw, >> + [CLKID_VCLK_DIV12_EN] = &s4_vclk_div12_en.hw, >> + [CLKID_VCLK2_DIV1] = &s4_vclk2_div1.hw, >> + [CLKID_VCLK2_DIV2_EN] = &s4_vclk2_div2_en.hw, >> + [CLKID_VCLK2_DIV4_EN] = &s4_vclk2_div4_en.hw, >> + [CLKID_VCLK2_DIV6_EN] = &s4_vclk2_div6_en.hw, >> + [CLKID_VCLK2_DIV12_EN] = &s4_vclk2_div12_en.hw, >> + [CLKID_VCLK_DIV2] = &s4_vclk_div2.hw, >> + [CLKID_VCLK_DIV4] = &s4_vclk_div4.hw, >> + [CLKID_VCLK_DIV6] = &s4_vclk_div6.hw, >> + [CLKID_VCLK_DIV12] = &s4_vclk_div12.hw, >> + [CLKID_VCLK2_DIV2] = &s4_vclk2_div2.hw, >> + [CLKID_VCLK2_DIV4] = &s4_vclk2_div4.hw, >> + [CLKID_VCLK2_DIV6] = &s4_vclk2_div6.hw, >> + [CLKID_VCLK2_DIV12] = &s4_vclk2_div12.hw, >> + [CLKID_CTS_ENCI_SEL] = &s4_cts_enci_sel.hw, >> + [CLKID_CTS_ENCP_SEL] = &s4_cts_encp_sel.hw, >> + [CLKID_CTS_VDAC_SEL] = &s4_cts_vdac_sel.hw, >> + [CLKID_HDMI_TX_SEL] = &s4_hdmi_tx_sel.hw, >> + [CLKID_CTS_ENCI] = &s4_cts_enci.hw, >> + [CLKID_CTS_ENCP] = &s4_cts_encp.hw, >> + [CLKID_CTS_VDAC] = &s4_cts_vdac.hw, >> + [CLKID_HDMI_TX] = &s4_hdmi_tx.hw, >> + [CLKID_HDMI_SEL] = &s4_hdmi_sel.hw, >> + [CLKID_HDMI_DIV] = &s4_hdmi_div.hw, >> + [CLKID_HDMI] = &s4_hdmi.hw, >> + [CLKID_TS_CLK_DIV] = &s4_ts_clk_div.hw, >> + [CLKID_TS_CLK_GATE] = &s4_ts_clk_gate.hw, >> + [CLKID_MALI_0_SEL] = &s4_mali_0_sel.hw, >> + [CLKID_MALI_0_DIV] = &s4_mali_0_div.hw, >> + [CLKID_MALI_0] = &s4_mali_0.hw, >> + [CLKID_MALI_1_SEL] = &s4_mali_1_sel.hw, >> + [CLKID_MALI_1_DIV] = &s4_mali_1_div.hw, >> + [CLKID_MALI_1] = &s4_mali_1.hw, >> + [CLKID_MALI] = &s4_mali_mux.hw, >> + [CLKID_VDEC_P0_SEL] = &s4_vdec_p0_mux.hw, >> + [CLKID_VDEC_P0_DIV] = &s4_vdec_p0_div.hw, >> + [CLKID_VDEC_P0] = &s4_vdec_p0.hw, >> + [CLKID_VDEC_P1_SEL] = &s4_vdec_p1_mux.hw, >> + [CLKID_VDEC_P1_DIV] = &s4_vdec_p1_div.hw, >> + [CLKID_VDEC_P1] = &s4_vdec_p1.hw, >> + [CLKID_VDEC_SEL] = &s4_vdec_mux.hw, >> + [CLKID_HEVCF_P0_SEL] = &s4_hevcf_p0_mux.hw, >> + [CLKID_HEVCF_P0_DIV] = &s4_hevcf_p0_div.hw, >> + [CLKID_HEVCF_P0] = &s4_hevcf_p0.hw, >> + [CLKID_HEVCF_P1_SEL] = &s4_hevcf_p1_mux.hw, >> + [CLKID_HEVCF_P1_DIV] = &s4_hevcf_p1_div.hw, >> + [CLKID_HEVCF_P1] = &s4_hevcf_p1.hw, >> + [CLKID_HEVCF_SEL] = &s4_hevcf_mux.hw, >> + [CLKID_VPU_0_SEL] = &s4_vpu_0_sel.hw, >> + [CLKID_VPU_0_DIV] = &s4_vpu_0_div.hw, >> + [CLKID_VPU_0] = &s4_vpu_0.hw, >> + [CLKID_VPU_1_SEL] = &s4_vpu_1_sel.hw, >> + [CLKID_VPU_1_DIV] = &s4_vpu_1_div.hw, >> + [CLKID_VPU_1] = &s4_vpu_1.hw, >> + [CLKID_VPU] = &s4_vpu.hw, >> + [CLKID_VPU_CLKB_TMP_SEL] = &s4_vpu_clkb_tmp_mux.hw, >> + [CLKID_VPU_CLKB_TMP_DIV] = &s4_vpu_clkb_tmp_div.hw, >> + [CLKID_VPU_CLKB_TMP] = &s4_vpu_clkb_tmp.hw, >> + [CLKID_VPU_CLKB_DIV] = &s4_vpu_clkb_div.hw, >> + [CLKID_VPU_CLKB] = &s4_vpu_clkb.hw, >> + [CLKID_VPU_CLKC_P0_SEL] = &s4_vpu_clkc_p0_mux.hw, >> + [CLKID_VPU_CLKC_P0_DIV] = &s4_vpu_clkc_p0_div.hw, >> + [CLKID_VPU_CLKC_P0] = &s4_vpu_clkc_p0.hw, >> + [CLKID_VPU_CLKC_P1_SEL] = &s4_vpu_clkc_p1_mux.hw, >> + [CLKID_VPU_CLKC_P1_DIV] = &s4_vpu_clkc_p1_div.hw, >> + [CLKID_VPU_CLKC_P1] = &s4_vpu_clkc_p1.hw, >> + [CLKID_VPU_CLKC_SEL] = &s4_vpu_clkc_mux.hw, >> + [CLKID_VAPB_0_SEL] = &s4_vapb_0_sel.hw, >> + [CLKID_VAPB_0_DIV] = &s4_vapb_0_div.hw, >> + [CLKID_VAPB_0] = &s4_vapb_0.hw, >> + [CLKID_VAPB_1_SEL] = &s4_vapb_1_sel.hw, >> + [CLKID_VAPB_1_DIV] = &s4_vapb_1_div.hw, >> + [CLKID_VAPB_1] = &s4_vapb_1.hw, >> + [CLKID_VAPB] = &s4_vapb.hw, >> + [CLKID_GE2D] = &s4_ge2d_gate.hw, >> + [CLKID_VDIN_MEAS_SEL] = &s4_vdin_meas_mux.hw, >> + [CLKID_VDIN_MEAS_DIV] = &s4_vdin_meas_div.hw, >> + [CLKID_VDIN_MEAS_GATE] = &s4_vdin_meas_gate.hw, >> + [CLKID_SD_EMMC_C_CLK_SEL] = &s4_sd_emmc_c_clk0_sel.hw, >> + [CLKID_SD_EMMC_C_CLK_DIV] = &s4_sd_emmc_c_clk0_div.hw, >> + [CLKID_SD_EMMC_C_CLK] = &s4_sd_emmc_c_clk0.hw, >> + [CLKID_SD_EMMC_A_CLK_SEL] = &s4_sd_emmc_a_clk0_sel.hw, >> + [CLKID_SD_EMMC_A_CLK_DIV] = &s4_sd_emmc_a_clk0_div.hw, >> + [CLKID_SD_EMMC_A_CLK] = &s4_sd_emmc_a_clk0.hw, >> + [CLKID_SD_EMMC_B_CLK_SEL] = &s4_sd_emmc_b_clk0_sel.hw, >> + [CLKID_SD_EMMC_B_CLK_DIV] = &s4_sd_emmc_b_clk0_div.hw, >> + [CLKID_SD_EMMC_B_CLK] = &s4_sd_emmc_b_clk0.hw, >> + [CLKID_SPICC0_SEL] = &s4_spicc0_mux.hw, >> + [CLKID_SPICC0_DIV] = &s4_spicc0_div.hw, >> + [CLKID_SPICC0_GATE] = &s4_spicc0_gate.hw, >> + [CLKID_PWM_A_SEL] = &s4_pwm_a_mux.hw, >> + [CLKID_PWM_A_DIV] = &s4_pwm_a_div.hw, >> + [CLKID_PWM_A_GATE] = &s4_pwm_a_gate.hw, >> + [CLKID_PWM_B_SEL] = &s4_pwm_b_mux.hw, >> + [CLKID_PWM_B_DIV] = &s4_pwm_b_div.hw, >> + [CLKID_PWM_B_GATE] = &s4_pwm_b_gate.hw, >> + [CLKID_PWM_C_SEL] = &s4_pwm_c_mux.hw, >> + [CLKID_PWM_C_DIV] = &s4_pwm_c_div.hw, >> + [CLKID_PWM_C_GATE] = &s4_pwm_c_gate.hw, >> + [CLKID_PWM_D_SEL] = &s4_pwm_d_mux.hw, >> + [CLKID_PWM_D_DIV] = &s4_pwm_d_div.hw, >> + [CLKID_PWM_D_GATE] = &s4_pwm_d_gate.hw, >> + [CLKID_PWM_E_SEL] = &s4_pwm_e_mux.hw, >> + [CLKID_PWM_E_DIV] = &s4_pwm_e_div.hw, >> + [CLKID_PWM_E_GATE] = &s4_pwm_e_gate.hw, >> + [CLKID_PWM_F_SEL] = &s4_pwm_f_mux.hw, >> + [CLKID_PWM_F_DIV] = &s4_pwm_f_div.hw, >> + [CLKID_PWM_F_GATE] = &s4_pwm_f_gate.hw, >> + [CLKID_PWM_G_SEL] = &s4_pwm_g_mux.hw, >> + [CLKID_PWM_G_DIV] = &s4_pwm_g_div.hw, >> + [CLKID_PWM_G_GATE] = &s4_pwm_g_gate.hw, >> + [CLKID_PWM_H_SEL] = &s4_pwm_h_mux.hw, >> + [CLKID_PWM_H_DIV] = &s4_pwm_h_div.hw, >> + [CLKID_PWM_H_GATE] = &s4_pwm_h_gate.hw, >> + [CLKID_PWM_I_SEL] = &s4_pwm_i_mux.hw, >> + [CLKID_PWM_I_DIV] = &s4_pwm_i_div.hw, >> + [CLKID_PWM_I_GATE] = &s4_pwm_i_gate.hw, >> + [CLKID_PWM_J_SEL] = &s4_pwm_j_mux.hw, >> + [CLKID_PWM_J_DIV] = &s4_pwm_j_div.hw, >> + [CLKID_PWM_J_GATE] = &s4_pwm_j_gate.hw, >> + [CLKID_SARADC_SEL] = &s4_saradc_mux.hw, >> + [CLKID_SARADC_DIV] = &s4_saradc_div.hw, >> + [CLKID_SARADC_GATE] = &s4_saradc_gate.hw, >> + [CLKID_GEN_SEL] = &s4_gen_clk_sel.hw, >> + [CLKID_GEN_DIV] = &s4_gen_clk_div.hw, >> + [CLKID_GEN_GATE] = &s4_gen_clk.hw, >> + [CLKID_DDR] = &s4_ddr.hw, >> + [CLKID_DOS] = &s4_dos.hw, >> + [CLKID_ETHPHY] = &s4_ethphy.hw, >> + [CLKID_MALI_GATE] = &s4_mali.hw, >> + [CLKID_AOCPU] = &s4_aocpu.hw, >> + [CLKID_AUCPU] = &s4_aucpu.hw, >> + [CLKID_CEC] = &s4_cec.hw, >> + [CLKID_SD_EMMC_A] = &s4_sdemmca.hw, >> + [CLKID_SD_EMMC_B] = &s4_sdemmcb.hw, >> + [CLKID_NAND] = &s4_nand.hw, >> + [CLKID_SMARTCARD] = &s4_smartcard.hw, >> + [CLKID_ACODEC] = &s4_acodec.hw, >> + [CLKID_SPIFC] = &s4_spifc.hw, >> + [CLKID_MSR_CLK] = &s4_msr_clk.hw, >> + [CLKID_IR_CTRL] = &s4_ir_ctrl.hw, >> + [CLKID_AUDIO] = &s4_audio.hw, >> + [CLKID_ETH] = &s4_eth.hw, >> + [CLKID_UART_A] = &s4_uart_a.hw, >> + [CLKID_UART_B] = &s4_uart_b.hw, >> + [CLKID_UART_C] = &s4_uart_c.hw, >> + [CLKID_UART_D] = &s4_uart_d.hw, >> + [CLKID_UART_E] = &s4_uart_e.hw, >> + [CLKID_AIFIFO] = &s4_aififo.hw, >> + [CLKID_TS_DDR] = &s4_ts_ddr.hw, >> + [CLKID_TS_PLL] = &s4_ts_pll.hw, >> + [CLKID_G2D] = &s4_g2d.hw, >> + [CLKID_SPICC0] = &s4_spicc0.hw, >> + [CLKID_USB] = &s4_usb.hw, >> + [CLKID_I2C_M_A] = &s4_i2c_m_a.hw, >> + [CLKID_I2C_M_B] = &s4_i2c_m_b.hw, >> + [CLKID_I2C_M_C] = &s4_i2c_m_c.hw, >> + [CLKID_I2C_M_D] = &s4_i2c_m_d.hw, >> + [CLKID_I2C_M_E] = &s4_i2c_m_e.hw, >> + [CLKID_HDMITX_APB] = &s4_hdmitx_apb.hw, >> + [CLKID_I2C_S_A] = &s4_i2c_s_a.hw, >> + [CLKID_USB1_TO_DDR] = &s4_usb1_to_ddr.hw, >> + [CLKID_HDCP22] = &s4_hdcp22.hw, >> + [CLKID_MMC_APB] = &s4_mmc_apb.hw, >> + [CLKID_RSA] = &s4_rsa.hw, >> + [CLKID_CPU_DEBUG] = &s4_cpu_debug.hw, >> + [CLKID_VPU_INTR] = &s4_vpu_intr.hw, >> + [CLKID_DEMOD] = &s4_demod.hw, >> + [CLKID_SAR_ADC] = &s4_sar_adc.hw, >> + [CLKID_GIC] = &s4_gic.hw, >> + [CLKID_PWM_AB] = &s4_pwm_ab.hw, >> + [CLKID_PWM_CD] = &s4_pwm_cd.hw, >> + [CLKID_PWM_EF] = &s4_pwm_ef.hw, >> + [CLKID_PWM_GH] = &s4_pwm_gh.hw, >> + [CLKID_PWM_IJ] = &s4_pwm_ij.hw, >> + [CLKID_HDCP22_ESMCLK_SEL] = &s4_hdcp22_esmclk_mux.hw, >> + [CLKID_HDCP22_ESMCLK_DIV] = &s4_hdcp22_esmclk_div.hw, >> + [CLKID_HDCP22_ESMCLK_GATE] = &s4_hdcp22_esmclk_gate.hw, >> + [CLKID_HDCP22_SKPCLK_SEL] = &s4_hdcp22_skpclk_mux.hw, >> + [CLKID_HDCP22_SKPCLK_DIV] = &s4_hdcp22_skpclk_div.hw, >> + [CLKID_HDCP22_SKPCLK_GATE] = &s4_hdcp22_skpclk_gate.hw, >> + [NR_CLKS] = NULL >> + }, >> + .num = NR_CLKS, >> +}; >> + >> +/* Convenience table to populate regmap in .probe */ >> +static struct clk_regmap *const s4_periphs_clk_regmaps[] = { >> + &s4_rtc_32k_by_oscin_clkin, >> + &s4_rtc_32k_by_oscin_div, >> + &s4_rtc_32k_by_oscin_sel, >> + &s4_rtc_32k_by_oscin, >> + &s4_rtc_clk, >> + &s4_sysclk_b_sel, >> + &s4_sysclk_b_div, >> + &s4_sysclk_b, >> + &s4_sysclk_a_sel, >> + &s4_sysclk_a_div, >> + &s4_sysclk_a, >> + &s4_sys_clk, >> + &s4_ceca_32k_clkin, >> + &s4_ceca_32k_div, >> + &s4_ceca_32k_sel_pre, >> + &s4_ceca_32k_sel, >> + &s4_ceca_32k_clkout, >> + &s4_cecb_32k_clkin, >> + &s4_cecb_32k_div, >> + &s4_cecb_32k_sel_pre, >> + &s4_cecb_32k_sel, >> + &s4_cecb_32k_clkout, >> + &s4_sc_clk_mux, >> + &s4_sc_clk_div, >> + &s4_sc_clk_gate, >> + &s4_12_24M_clk_gate, >> + &s4_12_24M_clk, >> + &s4_vid_pll_div, >> + &s4_vid_pll_sel, >> + &s4_vid_pll, >> + &s4_vclk_sel, >> + &s4_vclk2_sel, >> + &s4_vclk_input, >> + &s4_vclk2_input, >> + &s4_vclk_div, >> + &s4_vclk2_div, >> + &s4_vclk, >> + &s4_vclk2, >> + &s4_vclk_div1, >> + &s4_vclk_div2_en, >> + &s4_vclk_div4_en, >> + &s4_vclk_div6_en, >> + &s4_vclk_div12_en, >> + &s4_vclk2_div1, >> + &s4_vclk2_div2_en, >> + &s4_vclk2_div4_en, >> + &s4_vclk2_div6_en, >> + &s4_vclk2_div12_en, >> + &s4_cts_enci_sel, >> + &s4_cts_encp_sel, >> + &s4_cts_vdac_sel, >> + &s4_hdmi_tx_sel, >> + &s4_cts_enci, >> + &s4_cts_encp, >> + &s4_cts_vdac, >> + &s4_hdmi_tx, >> + &s4_hdmi_sel, >> + &s4_hdmi_div, >> + &s4_hdmi, >> + &s4_ts_clk_div, >> + &s4_ts_clk_gate, >> + &s4_mali_0_sel, >> + &s4_mali_0_div, >> + &s4_mali_0, >> + &s4_mali_1_sel, >> + &s4_mali_1_div, >> + &s4_mali_1, >> + &s4_mali_mux, >> + &s4_vdec_p0_mux, >> + &s4_vdec_p0_div, >> + &s4_vdec_p0, >> + &s4_vdec_p1_mux, >> + &s4_vdec_p1_div, >> + &s4_vdec_p1, >> + &s4_vdec_mux, >> + &s4_hevcf_p0_mux, >> + &s4_hevcf_p0_div, >> + &s4_hevcf_p0, >> + &s4_hevcf_p1_mux, >> + &s4_hevcf_p1_div, >> + &s4_hevcf_p1, >> + &s4_hevcf_mux, >> + &s4_vpu_0_sel, >> + &s4_vpu_0_div, >> + &s4_vpu_0, >> + &s4_vpu_1_sel, >> + &s4_vpu_1_div, >> + &s4_vpu_1, >> + &s4_vpu, >> + &s4_vpu_clkb_tmp_mux, >> + &s4_vpu_clkb_tmp_div, >> + &s4_vpu_clkb_tmp, >> + &s4_vpu_clkb_div, >> + &s4_vpu_clkb, >> + &s4_vpu_clkc_p0_mux, >> + &s4_vpu_clkc_p0_div, >> + &s4_vpu_clkc_p0, >> + &s4_vpu_clkc_p1_mux, >> + &s4_vpu_clkc_p1_div, >> + &s4_vpu_clkc_p1, >> + &s4_vpu_clkc_mux, >> + &s4_vapb_0_sel, >> + &s4_vapb_0_div, >> + &s4_vapb_0, >> + &s4_vapb_1_sel, >> + &s4_vapb_1_div, >> + &s4_vapb_1, >> + &s4_vapb, >> + &s4_ge2d_gate, >> + &s4_hdcp22_esmclk_mux, >> + &s4_hdcp22_esmclk_div, >> + &s4_hdcp22_esmclk_gate, >> + &s4_hdcp22_skpclk_mux, >> + &s4_hdcp22_skpclk_div, >> + &s4_hdcp22_skpclk_gate, >> + &s4_vdin_meas_mux, >> + &s4_vdin_meas_div, >> + &s4_vdin_meas_gate, >> + &s4_sd_emmc_c_clk0_sel, >> + &s4_sd_emmc_c_clk0_div, >> + &s4_sd_emmc_c_clk0, >> + &s4_sd_emmc_a_clk0_sel, >> + &s4_sd_emmc_a_clk0_div, >> + &s4_sd_emmc_a_clk0, >> + &s4_sd_emmc_b_clk0_sel, >> + &s4_sd_emmc_b_clk0_div, >> + &s4_sd_emmc_b_clk0, >> + &s4_spicc0_mux, >> + &s4_spicc0_div, >> + &s4_spicc0_gate, >> + &s4_pwm_a_mux, >> + &s4_pwm_a_div, >> + &s4_pwm_a_gate, >> + &s4_pwm_b_mux, >> + &s4_pwm_b_div, >> + &s4_pwm_b_gate, >> + &s4_pwm_c_mux, >> + &s4_pwm_c_div, >> + &s4_pwm_c_gate, >> + &s4_pwm_d_mux, >> + &s4_pwm_d_div, >> + &s4_pwm_d_gate, >> + &s4_pwm_e_mux, >> + &s4_pwm_e_div, >> + &s4_pwm_e_gate, >> + &s4_pwm_f_mux, >> + &s4_pwm_f_div, >> + &s4_pwm_f_gate, >> + &s4_pwm_g_mux, >> + &s4_pwm_g_div, >> + &s4_pwm_g_gate, >> + &s4_pwm_h_mux, >> + &s4_pwm_h_div, >> + &s4_pwm_h_gate, >> + &s4_pwm_i_mux, >> + &s4_pwm_i_div, >> + &s4_pwm_i_gate, >> + &s4_pwm_j_mux, >> + &s4_pwm_j_div, >> + &s4_pwm_j_gate, >> + &s4_saradc_mux, >> + &s4_saradc_div, >> + &s4_saradc_gate, >> + &s4_gen_clk_sel, >> + &s4_gen_clk_div, >> + &s4_gen_clk, >> + &s4_ddr, >> + &s4_dos, >> + &s4_ethphy, >> + &s4_mali, >> + &s4_aocpu, >> + &s4_aucpu, >> + &s4_cec, >> + &s4_sdemmca, >> + &s4_sdemmcb, >> + &s4_nand, >> + &s4_smartcard, >> + &s4_acodec, >> + &s4_spifc, >> + &s4_msr_clk, >> + &s4_ir_ctrl, >> + &s4_audio, >> + &s4_eth, >> + &s4_uart_a, >> + &s4_uart_b, >> + &s4_uart_c, >> + &s4_uart_d, >> + &s4_uart_e, >> + &s4_aififo, >> + &s4_ts_ddr, >> + &s4_ts_pll, >> + &s4_g2d, >> + &s4_spicc0, >> + &s4_usb, >> + &s4_i2c_m_a, >> + &s4_i2c_m_b, >> + &s4_i2c_m_c, >> + &s4_i2c_m_d, >> + &s4_i2c_m_e, >> + &s4_hdmitx_apb, >> + &s4_i2c_s_a, >> + &s4_usb1_to_ddr, >> + &s4_hdcp22, >> + &s4_mmc_apb, >> + &s4_rsa, >> + &s4_cpu_debug, >> + &s4_vpu_intr, >> + &s4_demod, >> + &s4_sar_adc, >> + &s4_gic, >> + &s4_pwm_ab, >> + &s4_pwm_cd, >> + &s4_pwm_ef, >> + &s4_pwm_gh, >> + &s4_pwm_ij, >> + &s4_demod_core_clk_mux, >> + &s4_demod_core_clk_div, >> + &s4_demod_core_clk_gate, >> + &s4_adc_extclk_in_mux, >> + &s4_adc_extclk_in_div, >> + &s4_adc_extclk_in_gate, >> +}; >> + >> +static struct regmap_config clkc_regmap_config = { >> + .reg_bits = 32, >> + .val_bits = 32, >> + .reg_stride = 4, >> +}; >> + >> +static int meson_s4_periphs_probe(struct platform_device *pdev) >> +{ >> + struct device *dev = &pdev->dev; >> + struct regmap *regmap; >> + void __iomem *base; >> + int ret, i; >> + >> + base = devm_platform_ioremap_resource(pdev, 0); >> + if (IS_ERR(base)) >> + return PTR_ERR(base); >> + >> + regmap = devm_regmap_init_mmio(dev, base, &clkc_regmap_config); >> + if (IS_ERR(regmap)) >> + return PTR_ERR(regmap); >> + >> + /* Populate regmap for the regmap backed clocks */ >> + for (i = 0; i < ARRAY_SIZE(s4_periphs_clk_regmaps); i++) >> + s4_periphs_clk_regmaps[i]->map = regmap; >> + >> + for (i = 0; i < s4_periphs_hw_onecell_data.num; i++) { >> + /* array might be sparse */ >> + if (!s4_periphs_hw_onecell_data.hws[i]) >> + continue; >> + >> + ret = devm_clk_hw_register(dev, s4_periphs_hw_onecell_data.hws[i]); >> + if (ret) { >> + dev_err(dev, "Clock registration failed\n"); >> + return ret; >> + } >> + } >> + >> + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, >> + &s4_periphs_hw_onecell_data); >> +} >> + >> +static const struct of_device_id clkc_match_table[] = { >> + { >> + .compatible = "amlogic,s4-peripherals-clkc", >> + }, >> + {} >> +}; >> + >> +static struct platform_driver s4_driver = { >> + .probe = meson_s4_periphs_probe, >> + .driver = { >> + .name = "s4-periphs-clkc", >> + .of_match_table = clkc_match_table, >> + }, >> +}; >> + >> +module_platform_driver(s4_driver); >> +MODULE_LICENSE("GPL"); >> diff --git a/drivers/clk/meson/s4-peripherals.h b/drivers/clk/meson/s4-peripherals.h >> new file mode 100644 >> index 000000000000..13ef07bada83 >> --- /dev/null >> +++ b/drivers/clk/meson/s4-peripherals.h >> @@ -0,0 +1,218 @@ >> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >> +/* >> + * Copyright (c) 2021 Amlogic, inc. >> + * Author: Yu Tu <yu.tu@amlogic.com> >> + */ >> + >> +#ifndef __MESON_S4_PERIPHERALS_H__ >> +#define __MESON_S4_PERIPHERALS_H__ >> + >> +/* >> + * Clock controller register offsets >> + * REG_BASE: REGISTER_BASE_ADDR = 0xfe000000 >> + */ >> +#define CLKCTRL_OSCIN_CTRL 0x004 >> +#define CLKCTRL_RTC_BY_OSCIN_CTRL0 0x008 >> +#define CLKCTRL_RTC_BY_OSCIN_CTRL1 0x00c >> +#define CLKCTRL_RTC_CTRL 0x010 >> +#define CLKCTRL_CHECK_CLK_RESULT 0x014 >> +#define CLKCTRL_MBIST_ATSPEED_CTRL 0x018 >> +#define CLKCTRL_LOCK_BIT_REG0 0x020 >> +#define CLKCTRL_LOCK_BIT_REG1 0x024 >> +#define CLKCTRL_LOCK_BIT_REG2 0x028 >> +#define CLKCTRL_LOCK_BIT_REG3 0x02c >> +#define CLKCTRL_PROT_BIT_REG0 0x030 >> +#define CLKCTRL_PROT_BIT_REG1 0x034 >> +#define CLKCTRL_PROT_BIT_REG2 0x038 >> +#define CLKCTRL_PROT_BIT_REG3 0x03c >> +#define CLKCTRL_SYS_CLK_CTRL0 0x040 >> +#define CLKCTRL_SYS_CLK_EN0_REG0 0x044 >> +#define CLKCTRL_SYS_CLK_EN0_REG1 0x048 >> +#define CLKCTRL_SYS_CLK_EN0_REG2 0x04c >> +#define CLKCTRL_SYS_CLK_EN0_REG3 0x050 >> +#define CLKCTRL_SYS_CLK_EN1_REG0 0x054 >> +#define CLKCTRL_SYS_CLK_EN1_REG1 0x058 >> +#define CLKCTRL_SYS_CLK_EN1_REG2 0x05c >> +#define CLKCTRL_SYS_CLK_EN1_REG3 0x060 >> +#define CLKCTRL_SYS_CLK_VPU_EN0 0x064 >> +#define CLKCTRL_SYS_CLK_VPU_EN1 0x068 >> +#define CLKCTRL_AXI_CLK_CTRL0 0x06c >> +#define CLKCTRL_TST_CTRL0 0x080 >> +#define CLKCTRL_TST_CTRL1 0x084 >> +#define CLKCTRL_CECA_CTRL0 0x088 >> +#define CLKCTRL_CECA_CTRL1 0x08c >> +#define CLKCTRL_CECB_CTRL0 0x090 >> +#define CLKCTRL_CECB_CTRL1 0x094 >> +#define CLKCTRL_SC_CLK_CTRL 0x098 >> +#define CLKCTRL_RAMA_CLK_CTRL0 0x0a4 >> +#define CLKCTRL_CLK12_24_CTRL 0x0a8 >> +#define CLKCTRL_VID_CLK_CTRL 0x0c0 >> +#define CLKCTRL_VID_CLK_CTRL2 0x0c4 >> +#define CLKCTRL_VID_CLK_DIV 0x0c8 >> +#define CLKCTRL_VIID_CLK_DIV 0x0cc >> +#define CLKCTRL_VIID_CLK_CTRL 0x0d0 >> +#define CLKCTRL_HDMI_CLK_CTRL 0x0e0 >> +#define CLKCTRL_VID_PLL_CLK_DIV 0x0e4 >> +#define CLKCTRL_VPU_CLK_CTRL 0x0e8 >> +#define CLKCTRL_VPU_CLKB_CTRL 0x0ec >> +#define CLKCTRL_VPU_CLKC_CTRL 0x0f0 >> +#define CLKCTRL_VID_LOCK_CLK_CTRL 0x0f4 >> +#define CLKCTRL_VDIN_MEAS_CLK_CTRL 0x0f8 >> +#define CLKCTRL_VAPBCLK_CTRL 0x0fc >> +#define CLKCTRL_HDCP22_CTRL 0x100 >> +#define CLKCTRL_CDAC_CLK_CTRL 0x108 >> +#define CLKCTRL_VDEC_CLK_CTRL 0x140 >> +#define CLKCTRL_VDEC2_CLK_CTRL 0x144 >> +#define CLKCTRL_VDEC3_CLK_CTRL 0x148 >> +#define CLKCTRL_VDEC4_CLK_CTRL 0x14c >> +#define CLKCTRL_TS_CLK_CTRL 0x158 >> +#define CLKCTRL_MALI_CLK_CTRL 0x15c >> +#define CLKCTRL_ETH_CLK_CTRL 0x164 >> +#define CLKCTRL_NAND_CLK_CTRL 0x168 >> +#define CLKCTRL_SD_EMMC_CLK_CTRL 0x16c >> +#define CLKCTRL_SPICC_CLK_CTRL 0x174 >> +#define CLKCTRL_GEN_CLK_CTRL 0x178 >> +#define CLKCTRL_SAR_CLK_CTRL 0x17c >> +#define CLKCTRL_PWM_CLK_AB_CTRL 0x180 >> +#define CLKCTRL_PWM_CLK_CD_CTRL 0x184 >> +#define CLKCTRL_PWM_CLK_EF_CTRL 0x188 >> +#define CLKCTRL_PWM_CLK_GH_CTRL 0x18c >> +#define CLKCTRL_PWM_CLK_IJ_CTRL 0x190 >> +#define CLKCTRL_DEMOD_CLK_CTRL 0x200 >> +#define CLKCTRL_TIMESTAMP_CTRL 0x400 >> +#define CLKCTRL_TIMESTAMP_CTRL1 0x404 >> +#define CLKCTRL_TIMESTAMP_CTRL2 0x40c >> +#define CLKCTRL_TIMESTAMP_RD0 0x410 >> +#define CLKCTRL_TIMESTAMP_RD1 0x414 >> +#define CLKCTRL_TIMEBASE_CTRL0 0x418 >> +#define CLKCTRL_TIMEBASE_CTRL1 0x41c >> +#define CLKCTRL_EFUSE_CPU_CFG01 0x480 >> +#define CLKCTRL_EFUSE_CPU_CFG2 0x484 >> +#define CLKCTRL_EFUSE_ENCP_CFG0 0x488 >> +#define CLKCTRL_EFUSE_MALI_CFG01 0x48c >> +#define CLKCTRL_EFUSE_LOCK 0x498 >> + >> +/* >> + * CLKID index values >> + * >> + * These indices are entirely contrived and do not map onto the hardware. >> + * It has now been decided to expose everything by default in the DT header: >> + * include/dt-bindings/clock/axg-clkc.h. Only the clocks ids we don't want >> + * to expose, such as the internal muxes and dividers of composite clocks, >> + * will remain defined here. >> + */ >> +#define CLKID_RTC_32K_CLKIN 0 >> +#define CLKID_RTC_32K_DIV 1 >> +#define CLKID_RTC_32K_SEL 2 >> +#define CLKID_RTC_32K_XATL 3 >> +#define CLKID_SYS_CLK_B_SEL 5 >> +#define CLKID_SYS_CLK_B_DIV 6 >> +#define CLKID_SYS_CLK_A_SEL 8 >> +#define CLKID_SYS_CLK_A_DIV 9 >> +#define CLKID_CECA_32K_CLKIN 12 >> +#define CLKID_CECA_32K_DIV 13 >> +#define CLKID_CECA_32K_SEL_PRE 14 >> +#define CLKID_CECA_32K_SEL 15 >> +#define CLKID_CECB_32K_CLKIN 17 >> +#define CLKID_CECB_32K_DIV 18 >> +#define CLKID_CECB_32K_SEL_PRE 19 >> +#define CLKID_CECB_32K_SEL 20 >> +#define CLKID_SC_CLK_SEL 22 >> +#define CLKID_SC_CLK_DIV 23 >> +#define CLKID_12_24M_CLK_GATE 25 >> +#define CLKID_12M_CLK_DIV 26 >> +#define CLKID_VID_PLL_DIV 28 >> +#define CLKID_VID_PLL_SEL 29 >> +#define CLKID_VCLK_SEL 31 >> +#define CLKID_VCLK2_SEL 32 >> +#define CLKID_VCLK_INPUT 33 >> +#define CLKID_VCLK2_INPUT 34 >> +#define CLKID_VCLK_DIV 35 >> +#define CLKID_VCLK2_DIV 36 >> +#define CLKID_VCLK_DIV2_EN 40 >> +#define CLKID_VCLK_DIV4_EN 41 >> +#define CLKID_VCLK_DIV6_EN 42 >> +#define CLKID_VCLK_DIV12_EN 43 >> +#define CLKID_VCLK2_DIV2_EN 45 >> +#define CLKID_VCLK2_DIV4_EN 46 >> +#define CLKID_VCLK2_DIV6_EN 47 >> +#define CLKID_VCLK2_DIV12_EN 48 >> +#define CLKID_CTS_ENCI_SEL 57 >> +#define CLKID_CTS_ENCP_SEL 58 >> +#define CLKID_CTS_VDAC_SEL 59 >> +#define CLKID_HDMI_TX_SEL 60 >> +#define CLKID_HDMI_TX 64 >> +#define CLKID_HDMI_SEL 65 >> +#define CLKID_HDMI_DIV 66 >> +#define CLKID_TS_CLK_DIV 68 >> +#define CLKID_MALI_0_SEL 70 >> +#define CLKID_MALI_0_DIV 71 >> +#define CLKID_MALI_1_SEL 73 >> +#define CLKID_MALI_1_DIV 74 >> +#define CLKID_VDEC_P0_SEL 77 >> +#define CLKID_VDEC_P0_DIV 78 >> +#define CLKID_VDEC_P1_SEL 80 >> +#define CLKID_VDEC_P1_DIV 81 >> +#define CLKID_HEVCF_P0_SEL 84 >> +#define CLKID_HEVCF_P0_DIV 85 >> +#define CLKID_HEVCF_P1_SEL 87 >> +#define CLKID_HEVCF_P1_DIV 88 >> +#define CLKID_VPU_0_SEL 91 >> +#define CLKID_VPU_0_DIV 92 >> +#define CLKID_VPU_1_SEL 94 >> +#define CLKID_VPU_1_DIV 95 >> +#define CLKID_VPU_CLKB_TMP_SEL 98 >> +#define CLKID_VPU_CLKB_TMP_DIV 99 >> +#define CLKID_VPU_CLKB_DIV 101 >> +#define CLKID_VPU_CLKC_P0_SEL 103 >> +#define CLKID_VPU_CLKC_P0_DIV 104 >> +#define CLKID_VPU_CLKC_P1_SEL 106 >> +#define CLKID_VPU_CLKC_P1_DIV 107 >> +#define CLKID_VAPB_0_SEL 110 >> +#define CLKID_VAPB_0_DIV 111 >> +#define CLKID_VAPB_1_SEL 113 >> +#define CLKID_VAPB_1_DIV 114 >> +#define CLKID_VDIN_MEAS_SEL 118 >> +#define CLKID_VDIN_MEAS_DIV 119 >> +#define CLKID_SD_EMMC_C_CLK_SEL 121 >> +#define CLKID_SD_EMMC_C_CLK_DIV 122 >> +#define CLKID_SD_EMMC_A_CLK_SEL 124 >> +#define CLKID_SD_EMMC_A_CLK_DIV 125 >> +#define CLKID_SD_EMMC_B_CLK_SEL 127 >> +#define CLKID_SD_EMMC_B_CLK_DIV 128 >> +#define CLKID_SPICC0_SEL 130 >> +#define CLKID_SPICC0_DIV 131 >> +#define CLKID_PWM_A_SEL 133 >> +#define CLKID_PWM_A_DIV 134 >> +#define CLKID_PWM_B_SEL 136 >> +#define CLKID_PWM_B_DIV 137 >> +#define CLKID_PWM_C_SEL 139 >> +#define CLKID_PWM_C_DIV 140 >> +#define CLKID_PWM_D_SEL 142 >> +#define CLKID_PWM_D_DIV 143 >> +#define CLKID_PWM_E_SEL 145 >> +#define CLKID_PWM_E_DIV 146 >> +#define CLKID_PWM_F_SEL 148 >> +#define CLKID_PWM_F_DIV 149 >> +#define CLKID_PWM_G_SEL 151 >> +#define CLKID_PWM_G_DIV 152 >> +#define CLKID_PWM_H_SEL 154 >> +#define CLKID_PWM_H_DIV 155 >> +#define CLKID_PWM_I_SEL 157 >> +#define CLKID_PWM_I_DIV 158 >> +#define CLKID_PWM_J_SEL 160 >> +#define CLKID_PWM_J_DIV 161 >> +#define CLKID_SARADC_SEL 163 >> +#define CLKID_SARADC_DIV 164 >> +#define CLKID_GEN_SEL 166 >> +#define CLKID_GEN_DIV 167 >> +#define CLKID_HDCP22_ESMCLK_SEL 219 >> +#define CLKID_HDCP22_ESMCLK_DIV 220 >> +#define CLKID_HDCP22_SKPCLK_SEL 222 >> +#define CLKID_HDCP22_SKPCLK_DIV 223 >> + >> +#define NR_CLKS 225 >> +/* include the CLKIDs that have been made part of the DT binding */ >> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> >> + >> +#endif /* __MESON_S4_PERIPHERALS_H__ */ >> diff --git a/include/dt-bindings/clock/amlogic,s4-peripherals-clkc.h b/include/dt-bindings/clock/amlogic,s4-peripherals-clkc.h >> new file mode 100644 >> index 000000000000..bbec5094d5c3 >> --- /dev/null >> +++ b/include/dt-bindings/clock/amlogic,s4-peripherals-clkc.h >> @@ -0,0 +1,131 @@ >> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ >> +/* >> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved. >> + * Author: Yu Tu <yu.tu@amlogic.com> >> + */ >> + >> +#ifndef _DT_BINDINGS_CLOCK_AMLOGIC_S4_PERIPHERALS_CLKC_H >> +#define _DT_BINDINGS_CLOCK_AMLOGIC_S4_PERIPHERALS_CLKC_H >> + >> +/* >> + * CLKID index values >> + */ >> + >> +#define CLKID_RTC_CLK 4 >> +#define CLKID_SYS_CLK_B_GATE 7 >> +#define CLKID_SYS_CLK_A_GATE 10 >> +#define CLKID_SYS_CLK 11 >> +#define CLKID_CECA_32K_CLKOUT 16 >> +#define CLKID_CECB_32K_CLKOUT 21 >> +#define CLKID_SC_CLK_GATE 24 >> +#define CLKID_12_24M_CLK_SEL 27 >> +#define CLKID_VID_PLL 30 >> +#define CLKID_VCLK 37 >> +#define CLKID_VCLK2 38 >> +#define CLKID_VCLK_DIV1 39 >> +#define CLKID_VCLK2_DIV1 44 >> +#define CLKID_VCLK_DIV2 49 >> +#define CLKID_VCLK_DIV4 50 >> +#define CLKID_VCLK_DIV6 51 >> +#define CLKID_VCLK_DIV12 52 >> +#define CLKID_VCLK2_DIV2 53 >> +#define CLKID_VCLK2_DIV4 54 >> +#define CLKID_VCLK2_DIV6 55 >> +#define CLKID_VCLK2_DIV12 56 >> +#define CLKID_CTS_ENCI 61 >> +#define CLKID_CTS_ENCP 62 >> +#define CLKID_CTS_VDAC 63 >> +#define CLKID_HDMI 67 >> +#define CLKID_TS_CLK_GATE 69 >> +#define CLKID_MALI_0 72 >> +#define CLKID_MALI_1 75 >> +#define CLKID_MALI 76 >> +#define CLKID_VDEC_P0 79 >> +#define CLKID_VDEC_P1 82 >> +#define CLKID_VDEC_SEL 83 >> +#define CLKID_HEVCF_P0 86 >> +#define CLKID_HEVCF_P1 89 >> +#define CLKID_HEVCF_SEL 90 >> +#define CLKID_VPU_0 93 >> +#define CLKID_VPU_1 96 >> +#define CLKID_VPU 97 >> +#define CLKID_VPU_CLKB_TMP 100 >> +#define CLKID_VPU_CLKB 102 >> +#define CLKID_VPU_CLKC_P0 105 >> +#define CLKID_VPU_CLKC_P1 108 >> +#define CLKID_VPU_CLKC_SEL 109 >> +#define CLKID_VAPB_0 112 >> +#define CLKID_VAPB_1 115 >> +#define CLKID_VAPB 116 >> +#define CLKID_GE2D 117 >> +#define CLKID_VDIN_MEAS_GATE 120 >> +#define CLKID_SD_EMMC_C_CLK 123 >> +#define CLKID_SD_EMMC_A_CLK 126 >> +#define CLKID_SD_EMMC_B_CLK 129 >> +#define CLKID_SPICC0_GATE 132 >> +#define CLKID_PWM_A_GATE 135 >> +#define CLKID_PWM_B_GATE 138 >> +#define CLKID_PWM_C_GATE 141 >> +#define CLKID_PWM_D_GATE 144 >> +#define CLKID_PWM_E_GATE 147 >> +#define CLKID_PWM_F_GATE 150 >> +#define CLKID_PWM_G_GATE 153 >> +#define CLKID_PWM_H_GATE 156 >> +#define CLKID_PWM_I_GATE 159 >> +#define CLKID_PWM_J_GATE 162 >> +#define CLKID_SARADC_GATE 165 >> +#define CLKID_GEN_GATE 168 >> +#define CLKID_DDR 169 >> +#define CLKID_DOS 170 >> +#define CLKID_ETHPHY 171 >> +#define CLKID_MALI_GATE 172 >> +#define CLKID_AOCPU 173 >> +#define CLKID_AUCPU 174 >> +#define CLKID_CEC 175 >> +#define CLKID_SD_EMMC_A 176 >> +#define CLKID_SD_EMMC_B 177 >> +#define CLKID_NAND 178 >> +#define CLKID_SMARTCARD 179 >> +#define CLKID_ACODEC 180 >> +#define CLKID_SPIFC 181 >> +#define CLKID_MSR_CLK 182 >> +#define CLKID_IR_CTRL 183 >> +#define CLKID_AUDIO 184 >> +#define CLKID_ETH 185 >> +#define CLKID_UART_A 186 >> +#define CLKID_UART_B 187 >> +#define CLKID_UART_C 188 >> +#define CLKID_UART_D 189 >> +#define CLKID_UART_E 190 >> +#define CLKID_AIFIFO 191 >> +#define CLKID_TS_DDR 192 >> +#define CLKID_TS_PLL 193 >> +#define CLKID_G2D 194 >> +#define CLKID_SPICC0 195 >> +#define CLKID_SPICC1 196 >> +#define CLKID_USB 197 >> +#define CLKID_I2C_M_A 198 >> +#define CLKID_I2C_M_B 199 >> +#define CLKID_I2C_M_C 200 >> +#define CLKID_I2C_M_D 201 >> +#define CLKID_I2C_M_E 202 >> +#define CLKID_HDMITX_APB 203 >> +#define CLKID_I2C_S_A 204 >> +#define CLKID_USB1_TO_DDR 205 >> +#define CLKID_HDCP22 206 >> +#define CLKID_MMC_APB 207 >> +#define CLKID_RSA 208 >> +#define CLKID_CPU_DEBUG 209 >> +#define CLKID_VPU_INTR 210 >> +#define CLKID_DEMOD 211 >> +#define CLKID_SAR_ADC 212 >> +#define CLKID_GIC 213 >> +#define CLKID_PWM_AB 214 >> +#define CLKID_PWM_CD 215 >> +#define CLKID_PWM_EF 216 >> +#define CLKID_PWM_GH 217 >> +#define CLKID_PWM_IJ 218 >> +#define CLKID_HDCP22_ESMCLK_GATE 221 >> +#define CLKID_HDCP22_SKPCLK_GATE 224 >> + >> +#endif /* _DT_BINDINGS_CLOCK_AMLOGIC_S4_PERIPHERALS_CLKC_H */ > > . _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 3/4] clk: meson: s4: add s4 SoC peripheral clock controller driver and bindings 2022-11-28 8:08 ` Yu Tu (?) @ 2022-11-28 12:23 ` Jerome Brunet -1 siblings, 0 replies; 109+ messages in thread From: Jerome Brunet @ 2022-11-28 12:23 UTC (permalink / raw) To: Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On Mon 28 Nov 2022 at 16:08, Yu Tu <yu.tu@amlogic.com> wrote: >>> + >>> +/* >>> + * This RTC clock can be supplied by an external 32KHz crystal oscillator. >>> + * If it is used, it should be documented in using fw_name and documented in the >>> + * Bindings. Not currently in use on this board, so skip it. >>> + */ >>> +static u32 rtc_clk_sel[] = { 0, 1 }; >> No reason to do that > > I'm going to change it to static u32 rtc_clk_sel[] = { 0, 1, 2 };. > I don't know if that's okay with you? ... then there is no need to specify this table. > >> >>> +static const struct clk_parent_data rtc_clk_sel_parent_data[] = { >>> + { .hw = &s4_rtc_32k_by_oscin.hw }, >>> + { .hw = &s4_rtc_32k_by_oscin_div.hw }, >>> + { .fw_name = "ext_32k", } >>> +}; >>> + >>> +static struct clk_regmap s4_rtc_clk = { >>> + .data = &(struct clk_regmap_mux_data) { >>> + .offset = CLKCTRL_RTC_CTRL, >>> + .mask = 0x3, >>> + .shift = 0, >>> + .table = rtc_clk_sel, >>> + .flags = CLK_MUX_ROUND_CLOSEST, >>> + }, >>> + .hw.init = &(struct clk_init_data){ >>> + .name = "rtc_clk_sel", >>> + .ops = &clk_regmap_mux_ops, >>> + .parent_data = rtc_clk_sel_parent_data, >>> + .num_parents = 2, >>> + .flags = CLK_SET_RATE_PARENT, >>> + }, >>> +}; >>> + [...] >>> + >>> +/* Video Clocks */ >>> +static struct clk_regmap s4_vid_pll_div = { >>> + .data = &(struct meson_vid_pll_div_data){ >>> + .val = { >>> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV, >>> + .shift = 0, >>> + .width = 15, >>> + }, >>> + .sel = { >>> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV, >>> + .shift = 16, >>> + .width = 2, >>> + }, >>> + }, >>> + .hw.init = &(struct clk_init_data) { >>> + .name = "vid_pll_div", >>> + /* Same to g12a */ >>> + .ops = &meson_vid_pll_div_ro_ops, >> Please add an helpful explanation. >> 'Same to g12a' is not helpful. >> > > "Because the vid_pll_div clock is a clock that does not need to change the > divisor, ops only provides meson_vid_pll_div_ro_ops." > I wonder if this description is ok for you? I understand this divider will not change with RO ops. I'm interrested why it does not change and how it is expected to be setup. > >>> + .parent_data = (const struct clk_parent_data []) { >>> + { .fw_name = "hdmi_pll", } >>> + }, >>> + .num_parents = 1, >>> + .flags = CLK_SET_RATE_PARENT, >>> + }, >>> +}; [...] >>> + >>> +static struct clk_regmap s4_vclk_sel = { >>> + .data = &(struct clk_regmap_mux_data){ >>> + .offset = CLKCTRL_VID_CLK_CTRL, >>> + .mask = 0x7, >>> + .shift = 16, >>> + }, >>> + .hw.init = &(struct clk_init_data){ >>> + .name = "vclk_sel", >>> + .ops = &clk_regmap_mux_ops, >>> + .parent_data = s4_vclk_parent_data, >>> + .num_parents = ARRAY_SIZE(s4_vclk_parent_data), >>> + }, >> You are stopping rate propagation here. >> It deserves an explanation. Same goes below. > > "When the driver uses this clock, needs to specify the patent clock he > wants in the dts." > Is ok for you? Then you still don't understand the clock flag usage. Preserving the parent selection (CLK_SET_RATE_NO_REPARENT) and rate propagation (CLK_SET_RATE_PARENT) is not the same thing. As it stands, your comment is not aliged with what you do. > >> >>> +}; ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 3/4] clk: meson: s4: add s4 SoC peripheral clock controller driver and bindings @ 2022-11-28 12:23 ` Jerome Brunet 0 siblings, 0 replies; 109+ messages in thread From: Jerome Brunet @ 2022-11-28 12:23 UTC (permalink / raw) To: Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On Mon 28 Nov 2022 at 16:08, Yu Tu <yu.tu@amlogic.com> wrote: >>> + >>> +/* >>> + * This RTC clock can be supplied by an external 32KHz crystal oscillator. >>> + * If it is used, it should be documented in using fw_name and documented in the >>> + * Bindings. Not currently in use on this board, so skip it. >>> + */ >>> +static u32 rtc_clk_sel[] = { 0, 1 }; >> No reason to do that > > I'm going to change it to static u32 rtc_clk_sel[] = { 0, 1, 2 };. > I don't know if that's okay with you? ... then there is no need to specify this table. > >> >>> +static const struct clk_parent_data rtc_clk_sel_parent_data[] = { >>> + { .hw = &s4_rtc_32k_by_oscin.hw }, >>> + { .hw = &s4_rtc_32k_by_oscin_div.hw }, >>> + { .fw_name = "ext_32k", } >>> +}; >>> + >>> +static struct clk_regmap s4_rtc_clk = { >>> + .data = &(struct clk_regmap_mux_data) { >>> + .offset = CLKCTRL_RTC_CTRL, >>> + .mask = 0x3, >>> + .shift = 0, >>> + .table = rtc_clk_sel, >>> + .flags = CLK_MUX_ROUND_CLOSEST, >>> + }, >>> + .hw.init = &(struct clk_init_data){ >>> + .name = "rtc_clk_sel", >>> + .ops = &clk_regmap_mux_ops, >>> + .parent_data = rtc_clk_sel_parent_data, >>> + .num_parents = 2, >>> + .flags = CLK_SET_RATE_PARENT, >>> + }, >>> +}; >>> + [...] >>> + >>> +/* Video Clocks */ >>> +static struct clk_regmap s4_vid_pll_div = { >>> + .data = &(struct meson_vid_pll_div_data){ >>> + .val = { >>> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV, >>> + .shift = 0, >>> + .width = 15, >>> + }, >>> + .sel = { >>> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV, >>> + .shift = 16, >>> + .width = 2, >>> + }, >>> + }, >>> + .hw.init = &(struct clk_init_data) { >>> + .name = "vid_pll_div", >>> + /* Same to g12a */ >>> + .ops = &meson_vid_pll_div_ro_ops, >> Please add an helpful explanation. >> 'Same to g12a' is not helpful. >> > > "Because the vid_pll_div clock is a clock that does not need to change the > divisor, ops only provides meson_vid_pll_div_ro_ops." > I wonder if this description is ok for you? I understand this divider will not change with RO ops. I'm interrested why it does not change and how it is expected to be setup. > >>> + .parent_data = (const struct clk_parent_data []) { >>> + { .fw_name = "hdmi_pll", } >>> + }, >>> + .num_parents = 1, >>> + .flags = CLK_SET_RATE_PARENT, >>> + }, >>> +}; [...] >>> + >>> +static struct clk_regmap s4_vclk_sel = { >>> + .data = &(struct clk_regmap_mux_data){ >>> + .offset = CLKCTRL_VID_CLK_CTRL, >>> + .mask = 0x7, >>> + .shift = 16, >>> + }, >>> + .hw.init = &(struct clk_init_data){ >>> + .name = "vclk_sel", >>> + .ops = &clk_regmap_mux_ops, >>> + .parent_data = s4_vclk_parent_data, >>> + .num_parents = ARRAY_SIZE(s4_vclk_parent_data), >>> + }, >> You are stopping rate propagation here. >> It deserves an explanation. Same goes below. > > "When the driver uses this clock, needs to specify the patent clock he > wants in the dts." > Is ok for you? Then you still don't understand the clock flag usage. Preserving the parent selection (CLK_SET_RATE_NO_REPARENT) and rate propagation (CLK_SET_RATE_PARENT) is not the same thing. As it stands, your comment is not aliged with what you do. > >> >>> +}; _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 3/4] clk: meson: s4: add s4 SoC peripheral clock controller driver and bindings @ 2022-11-28 12:23 ` Jerome Brunet 0 siblings, 0 replies; 109+ messages in thread From: Jerome Brunet @ 2022-11-28 12:23 UTC (permalink / raw) To: Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On Mon 28 Nov 2022 at 16:08, Yu Tu <yu.tu@amlogic.com> wrote: >>> + >>> +/* >>> + * This RTC clock can be supplied by an external 32KHz crystal oscillator. >>> + * If it is used, it should be documented in using fw_name and documented in the >>> + * Bindings. Not currently in use on this board, so skip it. >>> + */ >>> +static u32 rtc_clk_sel[] = { 0, 1 }; >> No reason to do that > > I'm going to change it to static u32 rtc_clk_sel[] = { 0, 1, 2 };. > I don't know if that's okay with you? ... then there is no need to specify this table. > >> >>> +static const struct clk_parent_data rtc_clk_sel_parent_data[] = { >>> + { .hw = &s4_rtc_32k_by_oscin.hw }, >>> + { .hw = &s4_rtc_32k_by_oscin_div.hw }, >>> + { .fw_name = "ext_32k", } >>> +}; >>> + >>> +static struct clk_regmap s4_rtc_clk = { >>> + .data = &(struct clk_regmap_mux_data) { >>> + .offset = CLKCTRL_RTC_CTRL, >>> + .mask = 0x3, >>> + .shift = 0, >>> + .table = rtc_clk_sel, >>> + .flags = CLK_MUX_ROUND_CLOSEST, >>> + }, >>> + .hw.init = &(struct clk_init_data){ >>> + .name = "rtc_clk_sel", >>> + .ops = &clk_regmap_mux_ops, >>> + .parent_data = rtc_clk_sel_parent_data, >>> + .num_parents = 2, >>> + .flags = CLK_SET_RATE_PARENT, >>> + }, >>> +}; >>> + [...] >>> + >>> +/* Video Clocks */ >>> +static struct clk_regmap s4_vid_pll_div = { >>> + .data = &(struct meson_vid_pll_div_data){ >>> + .val = { >>> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV, >>> + .shift = 0, >>> + .width = 15, >>> + }, >>> + .sel = { >>> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV, >>> + .shift = 16, >>> + .width = 2, >>> + }, >>> + }, >>> + .hw.init = &(struct clk_init_data) { >>> + .name = "vid_pll_div", >>> + /* Same to g12a */ >>> + .ops = &meson_vid_pll_div_ro_ops, >> Please add an helpful explanation. >> 'Same to g12a' is not helpful. >> > > "Because the vid_pll_div clock is a clock that does not need to change the > divisor, ops only provides meson_vid_pll_div_ro_ops." > I wonder if this description is ok for you? I understand this divider will not change with RO ops. I'm interrested why it does not change and how it is expected to be setup. > >>> + .parent_data = (const struct clk_parent_data []) { >>> + { .fw_name = "hdmi_pll", } >>> + }, >>> + .num_parents = 1, >>> + .flags = CLK_SET_RATE_PARENT, >>> + }, >>> +}; [...] >>> + >>> +static struct clk_regmap s4_vclk_sel = { >>> + .data = &(struct clk_regmap_mux_data){ >>> + .offset = CLKCTRL_VID_CLK_CTRL, >>> + .mask = 0x7, >>> + .shift = 16, >>> + }, >>> + .hw.init = &(struct clk_init_data){ >>> + .name = "vclk_sel", >>> + .ops = &clk_regmap_mux_ops, >>> + .parent_data = s4_vclk_parent_data, >>> + .num_parents = ARRAY_SIZE(s4_vclk_parent_data), >>> + }, >> You are stopping rate propagation here. >> It deserves an explanation. Same goes below. > > "When the driver uses this clock, needs to specify the patent clock he > wants in the dts." > Is ok for you? Then you still don't understand the clock flag usage. Preserving the parent selection (CLK_SET_RATE_NO_REPARENT) and rate propagation (CLK_SET_RATE_PARENT) is not the same thing. As it stands, your comment is not aliged with what you do. > >> >>> +}; _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 3/4] clk: meson: s4: add s4 SoC peripheral clock controller driver and bindings 2022-11-28 12:23 ` Jerome Brunet (?) @ 2022-11-28 14:02 ` Yu Tu -1 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-28 14:02 UTC (permalink / raw) To: Jerome Brunet, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang Hi Jerome, On 2022/11/28 20:23, Jerome Brunet wrote: > [ EXTERNAL EMAIL ] > > > On Mon 28 Nov 2022 at 16:08, Yu Tu <yu.tu@amlogic.com> wrote: > >>>> + >>>> +/* >>>> + * This RTC clock can be supplied by an external 32KHz crystal oscillator. >>>> + * If it is used, it should be documented in using fw_name and documented in the >>>> + * Bindings. Not currently in use on this board, so skip it. >>>> + */ >>>> +static u32 rtc_clk_sel[] = { 0, 1 }; >>> No reason to do that >> >> I'm going to change it to static u32 rtc_clk_sel[] = { 0, 1, 2 };. >> I don't know if that's okay with you? > > ... then there is no need to specify this table. > I got it.I'll change it as you suggest. > > >> >>> >>>> +static const struct clk_parent_data rtc_clk_sel_parent_data[] = { >>>> + { .hw = &s4_rtc_32k_by_oscin.hw }, >>>> + { .hw = &s4_rtc_32k_by_oscin_div.hw }, >>>> + { .fw_name = "ext_32k", } >>>> +}; >>>> + >>>> +static struct clk_regmap s4_rtc_clk = { >>>> + .data = &(struct clk_regmap_mux_data) { >>>> + .offset = CLKCTRL_RTC_CTRL, >>>> + .mask = 0x3, >>>> + .shift = 0, >>>> + .table = rtc_clk_sel, >>>> + .flags = CLK_MUX_ROUND_CLOSEST, >>>> + }, >>>> + .hw.init = &(struct clk_init_data){ >>>> + .name = "rtc_clk_sel", >>>> + .ops = &clk_regmap_mux_ops, >>>> + .parent_data = rtc_clk_sel_parent_data, >>>> + .num_parents = 2, >>>> + .flags = CLK_SET_RATE_PARENT, >>>> + }, >>>> +}; >>>> + > > [...] > >>>> + >>>> +/* Video Clocks */ >>>> +static struct clk_regmap s4_vid_pll_div = { >>>> + .data = &(struct meson_vid_pll_div_data){ >>>> + .val = { >>>> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV, >>>> + .shift = 0, >>>> + .width = 15, >>>> + }, >>>> + .sel = { >>>> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV, >>>> + .shift = 16, >>>> + .width = 2, >>>> + }, >>>> + }, >>>> + .hw.init = &(struct clk_init_data) { >>>> + .name = "vid_pll_div", >>>> + /* Same to g12a */ >>>> + .ops = &meson_vid_pll_div_ro_ops, >>> Please add an helpful explanation. >>> 'Same to g12a' is not helpful. >>> >> >> "Because the vid_pll_div clock is a clock that does not need to change the >> divisor, ops only provides meson_vid_pll_div_ro_ops." >> I wonder if this description is ok for you? > > I understand this divider will not change with RO ops. > I'm interrested why it does not change and how it is expected to be setup. > Maybe you can be more specific, I don't understand, you're interested in that part of it specifically. I don't know if you have the document of chip. If not, I can provide it to you privately. You can ask specific questions in conjunction with your documentation and submission(The original submission came from you.). I can give you a specific answer or ask the chip designer to give you a reply.Do you think that's okay with you >> >>>> + .parent_data = (const struct clk_parent_data []) { >>>> + { .fw_name = "hdmi_pll", } >>>> + }, >>>> + .num_parents = 1, >>>> + .flags = CLK_SET_RATE_PARENT, >>>> + }, >>>> +}; > > [...] > >>>> + >>>> +static struct clk_regmap s4_vclk_sel = { >>>> + .data = &(struct clk_regmap_mux_data){ >>>> + .offset = CLKCTRL_VID_CLK_CTRL, >>>> + .mask = 0x7, >>>> + .shift = 16, >>>> + }, >>>> + .hw.init = &(struct clk_init_data){ >>>> + .name = "vclk_sel", >>>> + .ops = &clk_regmap_mux_ops, >>>> + .parent_data = s4_vclk_parent_data, >>>> + .num_parents = ARRAY_SIZE(s4_vclk_parent_data), >>>> + }, >>> You are stopping rate propagation here. >>> It deserves an explanation. Same goes below. >> >> "When the driver uses this clock, needs to specify the patent clock he >> wants in the dts." >> Is ok for you? > > Then you still don't understand the clock flag usage. > > Preserving the parent selection (CLK_SET_RATE_NO_REPARENT) and rate > propagation (CLK_SET_RATE_PARENT) is not the same thing. > > As it stands, your comment is not aliged with what you do. > Thanks for the explanation of flag. My goal is to have the clock user describe themselves in DTS using the parent, or using the assigned-clocks and assigned-clock-parents settings in DTS. According to your explanation, some clocks like this should use CLK_SET_RATE_NO_REPARENT, right? >> >>> >>>> +}; > > . ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 3/4] clk: meson: s4: add s4 SoC peripheral clock controller driver and bindings @ 2022-11-28 14:02 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-28 14:02 UTC (permalink / raw) To: Jerome Brunet, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang Hi Jerome, On 2022/11/28 20:23, Jerome Brunet wrote: > [ EXTERNAL EMAIL ] > > > On Mon 28 Nov 2022 at 16:08, Yu Tu <yu.tu@amlogic.com> wrote: > >>>> + >>>> +/* >>>> + * This RTC clock can be supplied by an external 32KHz crystal oscillator. >>>> + * If it is used, it should be documented in using fw_name and documented in the >>>> + * Bindings. Not currently in use on this board, so skip it. >>>> + */ >>>> +static u32 rtc_clk_sel[] = { 0, 1 }; >>> No reason to do that >> >> I'm going to change it to static u32 rtc_clk_sel[] = { 0, 1, 2 };. >> I don't know if that's okay with you? > > ... then there is no need to specify this table. > I got it.I'll change it as you suggest. > > >> >>> >>>> +static const struct clk_parent_data rtc_clk_sel_parent_data[] = { >>>> + { .hw = &s4_rtc_32k_by_oscin.hw }, >>>> + { .hw = &s4_rtc_32k_by_oscin_div.hw }, >>>> + { .fw_name = "ext_32k", } >>>> +}; >>>> + >>>> +static struct clk_regmap s4_rtc_clk = { >>>> + .data = &(struct clk_regmap_mux_data) { >>>> + .offset = CLKCTRL_RTC_CTRL, >>>> + .mask = 0x3, >>>> + .shift = 0, >>>> + .table = rtc_clk_sel, >>>> + .flags = CLK_MUX_ROUND_CLOSEST, >>>> + }, >>>> + .hw.init = &(struct clk_init_data){ >>>> + .name = "rtc_clk_sel", >>>> + .ops = &clk_regmap_mux_ops, >>>> + .parent_data = rtc_clk_sel_parent_data, >>>> + .num_parents = 2, >>>> + .flags = CLK_SET_RATE_PARENT, >>>> + }, >>>> +}; >>>> + > > [...] > >>>> + >>>> +/* Video Clocks */ >>>> +static struct clk_regmap s4_vid_pll_div = { >>>> + .data = &(struct meson_vid_pll_div_data){ >>>> + .val = { >>>> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV, >>>> + .shift = 0, >>>> + .width = 15, >>>> + }, >>>> + .sel = { >>>> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV, >>>> + .shift = 16, >>>> + .width = 2, >>>> + }, >>>> + }, >>>> + .hw.init = &(struct clk_init_data) { >>>> + .name = "vid_pll_div", >>>> + /* Same to g12a */ >>>> + .ops = &meson_vid_pll_div_ro_ops, >>> Please add an helpful explanation. >>> 'Same to g12a' is not helpful. >>> >> >> "Because the vid_pll_div clock is a clock that does not need to change the >> divisor, ops only provides meson_vid_pll_div_ro_ops." >> I wonder if this description is ok for you? > > I understand this divider will not change with RO ops. > I'm interrested why it does not change and how it is expected to be setup. > Maybe you can be more specific, I don't understand, you're interested in that part of it specifically. I don't know if you have the document of chip. If not, I can provide it to you privately. You can ask specific questions in conjunction with your documentation and submission(The original submission came from you.). I can give you a specific answer or ask the chip designer to give you a reply.Do you think that's okay with you >> >>>> + .parent_data = (const struct clk_parent_data []) { >>>> + { .fw_name = "hdmi_pll", } >>>> + }, >>>> + .num_parents = 1, >>>> + .flags = CLK_SET_RATE_PARENT, >>>> + }, >>>> +}; > > [...] > >>>> + >>>> +static struct clk_regmap s4_vclk_sel = { >>>> + .data = &(struct clk_regmap_mux_data){ >>>> + .offset = CLKCTRL_VID_CLK_CTRL, >>>> + .mask = 0x7, >>>> + .shift = 16, >>>> + }, >>>> + .hw.init = &(struct clk_init_data){ >>>> + .name = "vclk_sel", >>>> + .ops = &clk_regmap_mux_ops, >>>> + .parent_data = s4_vclk_parent_data, >>>> + .num_parents = ARRAY_SIZE(s4_vclk_parent_data), >>>> + }, >>> You are stopping rate propagation here. >>> It deserves an explanation. Same goes below. >> >> "When the driver uses this clock, needs to specify the patent clock he >> wants in the dts." >> Is ok for you? > > Then you still don't understand the clock flag usage. > > Preserving the parent selection (CLK_SET_RATE_NO_REPARENT) and rate > propagation (CLK_SET_RATE_PARENT) is not the same thing. > > As it stands, your comment is not aliged with what you do. > Thanks for the explanation of flag. My goal is to have the clock user describe themselves in DTS using the parent, or using the assigned-clocks and assigned-clock-parents settings in DTS. According to your explanation, some clocks like this should use CLK_SET_RATE_NO_REPARENT, right? >> >>> >>>> +}; > > . _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 3/4] clk: meson: s4: add s4 SoC peripheral clock controller driver and bindings @ 2022-11-28 14:02 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-28 14:02 UTC (permalink / raw) To: Jerome Brunet, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang Hi Jerome, On 2022/11/28 20:23, Jerome Brunet wrote: > [ EXTERNAL EMAIL ] > > > On Mon 28 Nov 2022 at 16:08, Yu Tu <yu.tu@amlogic.com> wrote: > >>>> + >>>> +/* >>>> + * This RTC clock can be supplied by an external 32KHz crystal oscillator. >>>> + * If it is used, it should be documented in using fw_name and documented in the >>>> + * Bindings. Not currently in use on this board, so skip it. >>>> + */ >>>> +static u32 rtc_clk_sel[] = { 0, 1 }; >>> No reason to do that >> >> I'm going to change it to static u32 rtc_clk_sel[] = { 0, 1, 2 };. >> I don't know if that's okay with you? > > ... then there is no need to specify this table. > I got it.I'll change it as you suggest. > > >> >>> >>>> +static const struct clk_parent_data rtc_clk_sel_parent_data[] = { >>>> + { .hw = &s4_rtc_32k_by_oscin.hw }, >>>> + { .hw = &s4_rtc_32k_by_oscin_div.hw }, >>>> + { .fw_name = "ext_32k", } >>>> +}; >>>> + >>>> +static struct clk_regmap s4_rtc_clk = { >>>> + .data = &(struct clk_regmap_mux_data) { >>>> + .offset = CLKCTRL_RTC_CTRL, >>>> + .mask = 0x3, >>>> + .shift = 0, >>>> + .table = rtc_clk_sel, >>>> + .flags = CLK_MUX_ROUND_CLOSEST, >>>> + }, >>>> + .hw.init = &(struct clk_init_data){ >>>> + .name = "rtc_clk_sel", >>>> + .ops = &clk_regmap_mux_ops, >>>> + .parent_data = rtc_clk_sel_parent_data, >>>> + .num_parents = 2, >>>> + .flags = CLK_SET_RATE_PARENT, >>>> + }, >>>> +}; >>>> + > > [...] > >>>> + >>>> +/* Video Clocks */ >>>> +static struct clk_regmap s4_vid_pll_div = { >>>> + .data = &(struct meson_vid_pll_div_data){ >>>> + .val = { >>>> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV, >>>> + .shift = 0, >>>> + .width = 15, >>>> + }, >>>> + .sel = { >>>> + .reg_off = CLKCTRL_VID_PLL_CLK_DIV, >>>> + .shift = 16, >>>> + .width = 2, >>>> + }, >>>> + }, >>>> + .hw.init = &(struct clk_init_data) { >>>> + .name = "vid_pll_div", >>>> + /* Same to g12a */ >>>> + .ops = &meson_vid_pll_div_ro_ops, >>> Please add an helpful explanation. >>> 'Same to g12a' is not helpful. >>> >> >> "Because the vid_pll_div clock is a clock that does not need to change the >> divisor, ops only provides meson_vid_pll_div_ro_ops." >> I wonder if this description is ok for you? > > I understand this divider will not change with RO ops. > I'm interrested why it does not change and how it is expected to be setup. > Maybe you can be more specific, I don't understand, you're interested in that part of it specifically. I don't know if you have the document of chip. If not, I can provide it to you privately. You can ask specific questions in conjunction with your documentation and submission(The original submission came from you.). I can give you a specific answer or ask the chip designer to give you a reply.Do you think that's okay with you >> >>>> + .parent_data = (const struct clk_parent_data []) { >>>> + { .fw_name = "hdmi_pll", } >>>> + }, >>>> + .num_parents = 1, >>>> + .flags = CLK_SET_RATE_PARENT, >>>> + }, >>>> +}; > > [...] > >>>> + >>>> +static struct clk_regmap s4_vclk_sel = { >>>> + .data = &(struct clk_regmap_mux_data){ >>>> + .offset = CLKCTRL_VID_CLK_CTRL, >>>> + .mask = 0x7, >>>> + .shift = 16, >>>> + }, >>>> + .hw.init = &(struct clk_init_data){ >>>> + .name = "vclk_sel", >>>> + .ops = &clk_regmap_mux_ops, >>>> + .parent_data = s4_vclk_parent_data, >>>> + .num_parents = ARRAY_SIZE(s4_vclk_parent_data), >>>> + }, >>> You are stopping rate propagation here. >>> It deserves an explanation. Same goes below. >> >> "When the driver uses this clock, needs to specify the patent clock he >> wants in the dts." >> Is ok for you? > > Then you still don't understand the clock flag usage. > > Preserving the parent selection (CLK_SET_RATE_NO_REPARENT) and rate > propagation (CLK_SET_RATE_PARENT) is not the same thing. > > As it stands, your comment is not aliged with what you do. > Thanks for the explanation of flag. My goal is to have the clock user describe themselves in DTS using the parent, or using the assigned-clocks and assigned-clock-parents settings in DTS. According to your explanation, some clocks like this should use CLK_SET_RATE_NO_REPARENT, right? >> >>> >>>> +}; > > . _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 109+ messages in thread
* [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT 2022-11-23 2:13 ` Yu Tu (?) @ 2022-11-23 2:13 ` Yu Tu -1 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 2:13 UTC (permalink / raw) To: linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang, Yu Tu Added information about the S4 SOC Peripheral Clock controller in DT. Signed-off-by: Yu Tu <yu.tu@amlogic.com> --- arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 26 +++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi index bd9c2ef83314..e7fab6e400be 100644 --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi @@ -6,6 +6,8 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> / { cpus { @@ -100,6 +102,30 @@ clkc_pll: clock-controller@8000 { #clock-cells = <1>; }; + clkc_periphs: clock-controller { + compatible = "amlogic,s4-peripherals-clkc"; + reg = <0x0 0x0 0x0 0x49c>; + clocks = <&clkc_pll CLKID_FCLK_DIV2>, + <&clkc_pll CLKID_FCLK_DIV2P5>, + <&clkc_pll CLKID_FCLK_DIV3>, + <&clkc_pll CLKID_FCLK_DIV4>, + <&clkc_pll CLKID_FCLK_DIV5>, + <&clkc_pll CLKID_FCLK_DIV7>, + <&clkc_pll CLKID_HIFI_PLL>, + <&clkc_pll CLKID_GP0_PLL>, + <&clkc_pll CLKID_MPLL0>, + <&clkc_pll CLKID_MPLL1>, + <&clkc_pll CLKID_MPLL2>, + <&clkc_pll CLKID_MPLL3>, + <&clkc_pll CLKID_HDMI_PLL>, + <&xtal>; + clock-names = "fclk_div2", "fclk_div2p5", "fclk_div3", + "fclk_div4", "fclk_div5", "fclk_div7", + "hifi_pll", "gp0_pll", "mpll0", "mpll1", + "mpll2", "mpll3", "hdmi_pll", "xtal"; + #clock-cells = <1>; + }; + periphs_pinctrl: pinctrl@4000 { compatible = "amlogic,meson-s4-periphs-pinctrl"; #address-cells = <2>; -- 2.33.1 ^ permalink raw reply related [flat|nested] 109+ messages in thread
* [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT @ 2022-11-23 2:13 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 2:13 UTC (permalink / raw) To: linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang, Yu Tu Added information about the S4 SOC Peripheral Clock controller in DT. Signed-off-by: Yu Tu <yu.tu@amlogic.com> --- arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 26 +++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi index bd9c2ef83314..e7fab6e400be 100644 --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi @@ -6,6 +6,8 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> / { cpus { @@ -100,6 +102,30 @@ clkc_pll: clock-controller@8000 { #clock-cells = <1>; }; + clkc_periphs: clock-controller { + compatible = "amlogic,s4-peripherals-clkc"; + reg = <0x0 0x0 0x0 0x49c>; + clocks = <&clkc_pll CLKID_FCLK_DIV2>, + <&clkc_pll CLKID_FCLK_DIV2P5>, + <&clkc_pll CLKID_FCLK_DIV3>, + <&clkc_pll CLKID_FCLK_DIV4>, + <&clkc_pll CLKID_FCLK_DIV5>, + <&clkc_pll CLKID_FCLK_DIV7>, + <&clkc_pll CLKID_HIFI_PLL>, + <&clkc_pll CLKID_GP0_PLL>, + <&clkc_pll CLKID_MPLL0>, + <&clkc_pll CLKID_MPLL1>, + <&clkc_pll CLKID_MPLL2>, + <&clkc_pll CLKID_MPLL3>, + <&clkc_pll CLKID_HDMI_PLL>, + <&xtal>; + clock-names = "fclk_div2", "fclk_div2p5", "fclk_div3", + "fclk_div4", "fclk_div5", "fclk_div7", + "hifi_pll", "gp0_pll", "mpll0", "mpll1", + "mpll2", "mpll3", "hdmi_pll", "xtal"; + #clock-cells = <1>; + }; + periphs_pinctrl: pinctrl@4000 { compatible = "amlogic,meson-s4-periphs-pinctrl"; #address-cells = <2>; -- 2.33.1 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply related [flat|nested] 109+ messages in thread
* [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT @ 2022-11-23 2:13 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 2:13 UTC (permalink / raw) To: linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang, Yu Tu Added information about the S4 SOC Peripheral Clock controller in DT. Signed-off-by: Yu Tu <yu.tu@amlogic.com> --- arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 26 +++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi index bd9c2ef83314..e7fab6e400be 100644 --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi @@ -6,6 +6,8 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> / { cpus { @@ -100,6 +102,30 @@ clkc_pll: clock-controller@8000 { #clock-cells = <1>; }; + clkc_periphs: clock-controller { + compatible = "amlogic,s4-peripherals-clkc"; + reg = <0x0 0x0 0x0 0x49c>; + clocks = <&clkc_pll CLKID_FCLK_DIV2>, + <&clkc_pll CLKID_FCLK_DIV2P5>, + <&clkc_pll CLKID_FCLK_DIV3>, + <&clkc_pll CLKID_FCLK_DIV4>, + <&clkc_pll CLKID_FCLK_DIV5>, + <&clkc_pll CLKID_FCLK_DIV7>, + <&clkc_pll CLKID_HIFI_PLL>, + <&clkc_pll CLKID_GP0_PLL>, + <&clkc_pll CLKID_MPLL0>, + <&clkc_pll CLKID_MPLL1>, + <&clkc_pll CLKID_MPLL2>, + <&clkc_pll CLKID_MPLL3>, + <&clkc_pll CLKID_HDMI_PLL>, + <&xtal>; + clock-names = "fclk_div2", "fclk_div2p5", "fclk_div3", + "fclk_div4", "fclk_div5", "fclk_div7", + "hifi_pll", "gp0_pll", "mpll0", "mpll1", + "mpll2", "mpll3", "hdmi_pll", "xtal"; + #clock-cells = <1>; + }; + periphs_pinctrl: pinctrl@4000 { compatible = "amlogic,meson-s4-periphs-pinctrl"; #address-cells = <2>; -- 2.33.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 109+ messages in thread
* Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT 2022-11-23 2:13 ` Yu Tu (?) @ 2022-11-23 10:10 ` Krzysztof Kozlowski -1 siblings, 0 replies; 109+ messages in thread From: Krzysztof Kozlowski @ 2022-11-23 10:10 UTC (permalink / raw) To: Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 03:13, Yu Tu wrote: > Added information about the S4 SOC Peripheral Clock controller in DT. > > Signed-off-by: Yu Tu <yu.tu@amlogic.com> > --- > arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 26 +++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi > index bd9c2ef83314..e7fab6e400be 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi > @@ -6,6 +6,8 @@ > #include <dt-bindings/interrupt-controller/irq.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > #include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> > +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> > > / { > cpus { > @@ -100,6 +102,30 @@ clkc_pll: clock-controller@8000 { > #clock-cells = <1>; > }; > > + clkc_periphs: clock-controller { > + compatible = "amlogic,s4-peripherals-clkc"; > + reg = <0x0 0x0 0x0 0x49c>; This is broken... did you check for warnings? Best regards, Krzysztof _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT @ 2022-11-23 10:10 ` Krzysztof Kozlowski 0 siblings, 0 replies; 109+ messages in thread From: Krzysztof Kozlowski @ 2022-11-23 10:10 UTC (permalink / raw) To: Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 03:13, Yu Tu wrote: > Added information about the S4 SOC Peripheral Clock controller in DT. > > Signed-off-by: Yu Tu <yu.tu@amlogic.com> > --- > arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 26 +++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi > index bd9c2ef83314..e7fab6e400be 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi > @@ -6,6 +6,8 @@ > #include <dt-bindings/interrupt-controller/irq.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > #include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> > +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> > > / { > cpus { > @@ -100,6 +102,30 @@ clkc_pll: clock-controller@8000 { > #clock-cells = <1>; > }; > > + clkc_periphs: clock-controller { > + compatible = "amlogic,s4-peripherals-clkc"; > + reg = <0x0 0x0 0x0 0x49c>; This is broken... did you check for warnings? Best regards, Krzysztof ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT @ 2022-11-23 10:10 ` Krzysztof Kozlowski 0 siblings, 0 replies; 109+ messages in thread From: Krzysztof Kozlowski @ 2022-11-23 10:10 UTC (permalink / raw) To: Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 03:13, Yu Tu wrote: > Added information about the S4 SOC Peripheral Clock controller in DT. > > Signed-off-by: Yu Tu <yu.tu@amlogic.com> > --- > arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 26 +++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi > index bd9c2ef83314..e7fab6e400be 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi > @@ -6,6 +6,8 @@ > #include <dt-bindings/interrupt-controller/irq.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > #include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> > +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> > > / { > cpus { > @@ -100,6 +102,30 @@ clkc_pll: clock-controller@8000 { > #clock-cells = <1>; > }; > > + clkc_periphs: clock-controller { > + compatible = "amlogic,s4-peripherals-clkc"; > + reg = <0x0 0x0 0x0 0x49c>; This is broken... did you check for warnings? Best regards, Krzysztof _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT 2022-11-23 10:10 ` Krzysztof Kozlowski (?) @ 2022-11-23 11:27 ` Yu Tu -1 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 11:27 UTC (permalink / raw) To: Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang Hi Krzysztof, On 2022/11/23 18:10, Krzysztof Kozlowski wrote: > [ EXTERNAL EMAIL ] > > On 23/11/2022 03:13, Yu Tu wrote: >> Added information about the S4 SOC Peripheral Clock controller in DT. >> >> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >> --- >> arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 26 +++++++++++++++++++++++ >> 1 file changed, 26 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >> index bd9c2ef83314..e7fab6e400be 100644 >> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >> @@ -6,6 +6,8 @@ >> #include <dt-bindings/interrupt-controller/irq.h> >> #include <dt-bindings/interrupt-controller/arm-gic.h> >> #include <dt-bindings/gpio/gpio.h> >> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> >> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> >> >> / { >> cpus { >> @@ -100,6 +102,30 @@ clkc_pll: clock-controller@8000 { >> #clock-cells = <1>; >> }; >> >> + clkc_periphs: clock-controller { >> + compatible = "amlogic,s4-peripherals-clkc"; >> + reg = <0x0 0x0 0x0 0x49c>; > > This is broken... did you check for warnings? Yes, i do. You can have a look at the results of my test, as follows. total: 0 errors, 0 warnings, 0 checks, 38 lines checked ../patch_clk_v5_1122/0004-arm64-dts-meson-add-S4-Soc-Peripheral-clock-controll.patch has no obvious style problems and is ready for submission. > > > Best regards, > Krzysztof > > . _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT @ 2022-11-23 11:27 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 11:27 UTC (permalink / raw) To: Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang Hi Krzysztof, On 2022/11/23 18:10, Krzysztof Kozlowski wrote: > [ EXTERNAL EMAIL ] > > On 23/11/2022 03:13, Yu Tu wrote: >> Added information about the S4 SOC Peripheral Clock controller in DT. >> >> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >> --- >> arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 26 +++++++++++++++++++++++ >> 1 file changed, 26 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >> index bd9c2ef83314..e7fab6e400be 100644 >> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >> @@ -6,6 +6,8 @@ >> #include <dt-bindings/interrupt-controller/irq.h> >> #include <dt-bindings/interrupt-controller/arm-gic.h> >> #include <dt-bindings/gpio/gpio.h> >> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> >> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> >> >> / { >> cpus { >> @@ -100,6 +102,30 @@ clkc_pll: clock-controller@8000 { >> #clock-cells = <1>; >> }; >> >> + clkc_periphs: clock-controller { >> + compatible = "amlogic,s4-peripherals-clkc"; >> + reg = <0x0 0x0 0x0 0x49c>; > > This is broken... did you check for warnings? Yes, i do. You can have a look at the results of my test, as follows. total: 0 errors, 0 warnings, 0 checks, 38 lines checked ../patch_clk_v5_1122/0004-arm64-dts-meson-add-S4-Soc-Peripheral-clock-controll.patch has no obvious style problems and is ready for submission. > > > Best regards, > Krzysztof > > . ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT @ 2022-11-23 11:27 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 11:27 UTC (permalink / raw) To: Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang Hi Krzysztof, On 2022/11/23 18:10, Krzysztof Kozlowski wrote: > [ EXTERNAL EMAIL ] > > On 23/11/2022 03:13, Yu Tu wrote: >> Added information about the S4 SOC Peripheral Clock controller in DT. >> >> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >> --- >> arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 26 +++++++++++++++++++++++ >> 1 file changed, 26 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >> index bd9c2ef83314..e7fab6e400be 100644 >> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >> @@ -6,6 +6,8 @@ >> #include <dt-bindings/interrupt-controller/irq.h> >> #include <dt-bindings/interrupt-controller/arm-gic.h> >> #include <dt-bindings/gpio/gpio.h> >> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> >> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> >> >> / { >> cpus { >> @@ -100,6 +102,30 @@ clkc_pll: clock-controller@8000 { >> #clock-cells = <1>; >> }; >> >> + clkc_periphs: clock-controller { >> + compatible = "amlogic,s4-peripherals-clkc"; >> + reg = <0x0 0x0 0x0 0x49c>; > > This is broken... did you check for warnings? Yes, i do. You can have a look at the results of my test, as follows. total: 0 errors, 0 warnings, 0 checks, 38 lines checked ../patch_clk_v5_1122/0004-arm64-dts-meson-add-S4-Soc-Peripheral-clock-controll.patch has no obvious style problems and is ready for submission. > > > Best regards, > Krzysztof > > . _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT 2022-11-23 11:27 ` Yu Tu (?) @ 2022-11-23 13:02 ` Krzysztof Kozlowski -1 siblings, 0 replies; 109+ messages in thread From: Krzysztof Kozlowski @ 2022-11-23 13:02 UTC (permalink / raw) To: Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 12:27, Yu Tu wrote: > Hi Krzysztof, > > On 2022/11/23 18:10, Krzysztof Kozlowski wrote: >> [ EXTERNAL EMAIL ] >> >> On 23/11/2022 03:13, Yu Tu wrote: >>> Added information about the S4 SOC Peripheral Clock controller in DT. >>> >>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>> --- >>> arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 26 +++++++++++++++++++++++ >>> 1 file changed, 26 insertions(+) >>> >>> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>> index bd9c2ef83314..e7fab6e400be 100644 >>> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>> @@ -6,6 +6,8 @@ >>> #include <dt-bindings/interrupt-controller/irq.h> >>> #include <dt-bindings/interrupt-controller/arm-gic.h> >>> #include <dt-bindings/gpio/gpio.h> >>> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> >>> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> >>> >>> / { >>> cpus { >>> @@ -100,6 +102,30 @@ clkc_pll: clock-controller@8000 { >>> #clock-cells = <1>; >>> }; >>> >>> + clkc_periphs: clock-controller { >>> + compatible = "amlogic,s4-peripherals-clkc"; >>> + reg = <0x0 0x0 0x0 0x49c>; >> >> This is broken... did you check for warnings? > Yes, i do. > You can have a look at the results of my test, as follows. > > total: 0 errors, 0 warnings, 0 checks, 38 lines checked > > ../patch_clk_v5_1122/0004-arm64-dts-meson-add-S4-Soc-Peripheral-clock-controll.patch > has no obvious style problems and is ready for submission. > This is a checkpatch output. I am talking about DTS broken. dtc should warn you. Best regards, Krzysztof _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT @ 2022-11-23 13:02 ` Krzysztof Kozlowski 0 siblings, 0 replies; 109+ messages in thread From: Krzysztof Kozlowski @ 2022-11-23 13:02 UTC (permalink / raw) To: Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 12:27, Yu Tu wrote: > Hi Krzysztof, > > On 2022/11/23 18:10, Krzysztof Kozlowski wrote: >> [ EXTERNAL EMAIL ] >> >> On 23/11/2022 03:13, Yu Tu wrote: >>> Added information about the S4 SOC Peripheral Clock controller in DT. >>> >>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>> --- >>> arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 26 +++++++++++++++++++++++ >>> 1 file changed, 26 insertions(+) >>> >>> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>> index bd9c2ef83314..e7fab6e400be 100644 >>> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>> @@ -6,6 +6,8 @@ >>> #include <dt-bindings/interrupt-controller/irq.h> >>> #include <dt-bindings/interrupt-controller/arm-gic.h> >>> #include <dt-bindings/gpio/gpio.h> >>> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> >>> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> >>> >>> / { >>> cpus { >>> @@ -100,6 +102,30 @@ clkc_pll: clock-controller@8000 { >>> #clock-cells = <1>; >>> }; >>> >>> + clkc_periphs: clock-controller { >>> + compatible = "amlogic,s4-peripherals-clkc"; >>> + reg = <0x0 0x0 0x0 0x49c>; >> >> This is broken... did you check for warnings? > Yes, i do. > You can have a look at the results of my test, as follows. > > total: 0 errors, 0 warnings, 0 checks, 38 lines checked > > ../patch_clk_v5_1122/0004-arm64-dts-meson-add-S4-Soc-Peripheral-clock-controll.patch > has no obvious style problems and is ready for submission. > This is a checkpatch output. I am talking about DTS broken. dtc should warn you. Best regards, Krzysztof ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT @ 2022-11-23 13:02 ` Krzysztof Kozlowski 0 siblings, 0 replies; 109+ messages in thread From: Krzysztof Kozlowski @ 2022-11-23 13:02 UTC (permalink / raw) To: Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 12:27, Yu Tu wrote: > Hi Krzysztof, > > On 2022/11/23 18:10, Krzysztof Kozlowski wrote: >> [ EXTERNAL EMAIL ] >> >> On 23/11/2022 03:13, Yu Tu wrote: >>> Added information about the S4 SOC Peripheral Clock controller in DT. >>> >>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>> --- >>> arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 26 +++++++++++++++++++++++ >>> 1 file changed, 26 insertions(+) >>> >>> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>> index bd9c2ef83314..e7fab6e400be 100644 >>> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>> @@ -6,6 +6,8 @@ >>> #include <dt-bindings/interrupt-controller/irq.h> >>> #include <dt-bindings/interrupt-controller/arm-gic.h> >>> #include <dt-bindings/gpio/gpio.h> >>> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> >>> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> >>> >>> / { >>> cpus { >>> @@ -100,6 +102,30 @@ clkc_pll: clock-controller@8000 { >>> #clock-cells = <1>; >>> }; >>> >>> + clkc_periphs: clock-controller { >>> + compatible = "amlogic,s4-peripherals-clkc"; >>> + reg = <0x0 0x0 0x0 0x49c>; >> >> This is broken... did you check for warnings? > Yes, i do. > You can have a look at the results of my test, as follows. > > total: 0 errors, 0 warnings, 0 checks, 38 lines checked > > ../patch_clk_v5_1122/0004-arm64-dts-meson-add-S4-Soc-Peripheral-clock-controll.patch > has no obvious style problems and is ready for submission. > This is a checkpatch output. I am talking about DTS broken. dtc should warn you. Best regards, Krzysztof _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT 2022-11-23 13:02 ` Krzysztof Kozlowski (?) @ 2022-11-23 13:23 ` Yu Tu -1 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 13:23 UTC (permalink / raw) To: Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 2022/11/23 21:02, Krzysztof Kozlowski wrote: > [ EXTERNAL EMAIL ] > > On 23/11/2022 12:27, Yu Tu wrote: >> Hi Krzysztof, >> >> On 2022/11/23 18:10, Krzysztof Kozlowski wrote: >>> [ EXTERNAL EMAIL ] >>> >>> On 23/11/2022 03:13, Yu Tu wrote: >>>> Added information about the S4 SOC Peripheral Clock controller in DT. >>>> >>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>> --- >>>> arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 26 +++++++++++++++++++++++ >>>> 1 file changed, 26 insertions(+) >>>> >>>> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>>> index bd9c2ef83314..e7fab6e400be 100644 >>>> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>>> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>>> @@ -6,6 +6,8 @@ >>>> #include <dt-bindings/interrupt-controller/irq.h> >>>> #include <dt-bindings/interrupt-controller/arm-gic.h> >>>> #include <dt-bindings/gpio/gpio.h> >>>> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> >>>> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> >>>> >>>> / { >>>> cpus { >>>> @@ -100,6 +102,30 @@ clkc_pll: clock-controller@8000 { >>>> #clock-cells = <1>; >>>> }; >>>> >>>> + clkc_periphs: clock-controller { >>>> + compatible = "amlogic,s4-peripherals-clkc"; >>>> + reg = <0x0 0x0 0x0 0x49c>; >>> >>> This is broken... did you check for warnings? >> Yes, i do. >> You can have a look at the results of my test, as follows. >> >> total: 0 errors, 0 warnings, 0 checks, 38 lines checked >> >> ../patch_clk_v5_1122/0004-arm64-dts-meson-add-S4-Soc-Peripheral-clock-controll.patch >> has no obvious style problems and is ready for submission. >> > > This is a checkpatch output. I am talking about DTS broken. dtc should > warn you. Do you mean I will have wraning in compiling? I actually compiled without warning. ccf$ make ARCH=arm64 dtbs -j12 DTC arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dtb > > Best regards, > Krzysztof > > . _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT @ 2022-11-23 13:23 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 13:23 UTC (permalink / raw) To: Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 2022/11/23 21:02, Krzysztof Kozlowski wrote: > [ EXTERNAL EMAIL ] > > On 23/11/2022 12:27, Yu Tu wrote: >> Hi Krzysztof, >> >> On 2022/11/23 18:10, Krzysztof Kozlowski wrote: >>> [ EXTERNAL EMAIL ] >>> >>> On 23/11/2022 03:13, Yu Tu wrote: >>>> Added information about the S4 SOC Peripheral Clock controller in DT. >>>> >>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>> --- >>>> arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 26 +++++++++++++++++++++++ >>>> 1 file changed, 26 insertions(+) >>>> >>>> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>>> index bd9c2ef83314..e7fab6e400be 100644 >>>> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>>> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>>> @@ -6,6 +6,8 @@ >>>> #include <dt-bindings/interrupt-controller/irq.h> >>>> #include <dt-bindings/interrupt-controller/arm-gic.h> >>>> #include <dt-bindings/gpio/gpio.h> >>>> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> >>>> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> >>>> >>>> / { >>>> cpus { >>>> @@ -100,6 +102,30 @@ clkc_pll: clock-controller@8000 { >>>> #clock-cells = <1>; >>>> }; >>>> >>>> + clkc_periphs: clock-controller { >>>> + compatible = "amlogic,s4-peripherals-clkc"; >>>> + reg = <0x0 0x0 0x0 0x49c>; >>> >>> This is broken... did you check for warnings? >> Yes, i do. >> You can have a look at the results of my test, as follows. >> >> total: 0 errors, 0 warnings, 0 checks, 38 lines checked >> >> ../patch_clk_v5_1122/0004-arm64-dts-meson-add-S4-Soc-Peripheral-clock-controll.patch >> has no obvious style problems and is ready for submission. >> > > This is a checkpatch output. I am talking about DTS broken. dtc should > warn you. Do you mean I will have wraning in compiling? I actually compiled without warning. ccf$ make ARCH=arm64 dtbs -j12 DTC arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dtb > > Best regards, > Krzysztof > > . ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT @ 2022-11-23 13:23 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 13:23 UTC (permalink / raw) To: Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 2022/11/23 21:02, Krzysztof Kozlowski wrote: > [ EXTERNAL EMAIL ] > > On 23/11/2022 12:27, Yu Tu wrote: >> Hi Krzysztof, >> >> On 2022/11/23 18:10, Krzysztof Kozlowski wrote: >>> [ EXTERNAL EMAIL ] >>> >>> On 23/11/2022 03:13, Yu Tu wrote: >>>> Added information about the S4 SOC Peripheral Clock controller in DT. >>>> >>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>> --- >>>> arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 26 +++++++++++++++++++++++ >>>> 1 file changed, 26 insertions(+) >>>> >>>> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>>> index bd9c2ef83314..e7fab6e400be 100644 >>>> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>>> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>>> @@ -6,6 +6,8 @@ >>>> #include <dt-bindings/interrupt-controller/irq.h> >>>> #include <dt-bindings/interrupt-controller/arm-gic.h> >>>> #include <dt-bindings/gpio/gpio.h> >>>> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> >>>> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> >>>> >>>> / { >>>> cpus { >>>> @@ -100,6 +102,30 @@ clkc_pll: clock-controller@8000 { >>>> #clock-cells = <1>; >>>> }; >>>> >>>> + clkc_periphs: clock-controller { >>>> + compatible = "amlogic,s4-peripherals-clkc"; >>>> + reg = <0x0 0x0 0x0 0x49c>; >>> >>> This is broken... did you check for warnings? >> Yes, i do. >> You can have a look at the results of my test, as follows. >> >> total: 0 errors, 0 warnings, 0 checks, 38 lines checked >> >> ../patch_clk_v5_1122/0004-arm64-dts-meson-add-S4-Soc-Peripheral-clock-controll.patch >> has no obvious style problems and is ready for submission. >> > > This is a checkpatch output. I am talking about DTS broken. dtc should > warn you. Do you mean I will have wraning in compiling? I actually compiled without warning. ccf$ make ARCH=arm64 dtbs -j12 DTC arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dtb > > Best regards, > Krzysztof > > . _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT 2022-11-23 13:23 ` Yu Tu (?) @ 2022-11-23 14:12 ` Krzysztof Kozlowski -1 siblings, 0 replies; 109+ messages in thread From: Krzysztof Kozlowski @ 2022-11-23 14:12 UTC (permalink / raw) To: Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 14:23, Yu Tu wrote: >>> ../patch_clk_v5_1122/0004-arm64-dts-meson-add-S4-Soc-Peripheral-clock-controll.patch >>> has no obvious style problems and is ready for submission. >>> >> >> This is a checkpatch output. I am talking about DTS broken. dtc should >> warn you. > > Do you mean I will have wraning in compiling? > I actually compiled without warning. > ccf$ make ARCH=arm64 dtbs -j12 > DTC arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dtb > Nope: ../arch/arm64/boot/dts/amlogic/meson-s4.dtsi:105.35-127.6: Warning (unit_address_vs_reg): /soc/apb4@fe000000/clock-controller: node has a reg or ranges property, but no unit name Test your patches better before using reviewers time for trivial compile-time fixes. The same rules for C code apply for DTS. Best regards, Krzysztof ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT @ 2022-11-23 14:12 ` Krzysztof Kozlowski 0 siblings, 0 replies; 109+ messages in thread From: Krzysztof Kozlowski @ 2022-11-23 14:12 UTC (permalink / raw) To: Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 14:23, Yu Tu wrote: >>> ../patch_clk_v5_1122/0004-arm64-dts-meson-add-S4-Soc-Peripheral-clock-controll.patch >>> has no obvious style problems and is ready for submission. >>> >> >> This is a checkpatch output. I am talking about DTS broken. dtc should >> warn you. > > Do you mean I will have wraning in compiling? > I actually compiled without warning. > ccf$ make ARCH=arm64 dtbs -j12 > DTC arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dtb > Nope: ../arch/arm64/boot/dts/amlogic/meson-s4.dtsi:105.35-127.6: Warning (unit_address_vs_reg): /soc/apb4@fe000000/clock-controller: node has a reg or ranges property, but no unit name Test your patches better before using reviewers time for trivial compile-time fixes. The same rules for C code apply for DTS. Best regards, Krzysztof _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT @ 2022-11-23 14:12 ` Krzysztof Kozlowski 0 siblings, 0 replies; 109+ messages in thread From: Krzysztof Kozlowski @ 2022-11-23 14:12 UTC (permalink / raw) To: Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 14:23, Yu Tu wrote: >>> ../patch_clk_v5_1122/0004-arm64-dts-meson-add-S4-Soc-Peripheral-clock-controll.patch >>> has no obvious style problems and is ready for submission. >>> >> >> This is a checkpatch output. I am talking about DTS broken. dtc should >> warn you. > > Do you mean I will have wraning in compiling? > I actually compiled without warning. > ccf$ make ARCH=arm64 dtbs -j12 > DTC arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dtb > Nope: ../arch/arm64/boot/dts/amlogic/meson-s4.dtsi:105.35-127.6: Warning (unit_address_vs_reg): /soc/apb4@fe000000/clock-controller: node has a reg or ranges property, but no unit name Test your patches better before using reviewers time for trivial compile-time fixes. The same rules for C code apply for DTS. Best regards, Krzysztof _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT 2022-11-23 14:12 ` Krzysztof Kozlowski (?) @ 2022-11-23 14:23 ` Yu Tu -1 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 14:23 UTC (permalink / raw) To: Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 2022/11/23 22:12, Krzysztof Kozlowski wrote: > [ EXTERNAL EMAIL ] > > On 23/11/2022 14:23, Yu Tu wrote: >>>> ../patch_clk_v5_1122/0004-arm64-dts-meson-add-S4-Soc-Peripheral-clock-controll.patch >>>> has no obvious style problems and is ready for submission. >>>> >>> >>> This is a checkpatch output. I am talking about DTS broken. dtc should >>> warn you. >> >> Do you mean I will have wraning in compiling? >> I actually compiled without warning. >> ccf$ make ARCH=arm64 dtbs -j12 >> DTC arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dtb >> > > Nope: > > ../arch/arm64/boot/dts/amlogic/meson-s4.dtsi:105.35-127.6: Warning > (unit_address_vs_reg): /soc/apb4@fe000000/clock-controller: node has a > reg or ranges property, but no unit name > > Test your patches better before using reviewers time for trivial > compile-time fixes. The same rules for C code apply for DTS. > Like this: clkc_periphs: clock-controller@0 { compatible = "amlogic,s4-peripherals-clkc"; reg = <0x0 0x0 0x0 0x49c>; You mean it should be, right? > Best regards, > Krzysztof > > . _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT @ 2022-11-23 14:23 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 14:23 UTC (permalink / raw) To: Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 2022/11/23 22:12, Krzysztof Kozlowski wrote: > [ EXTERNAL EMAIL ] > > On 23/11/2022 14:23, Yu Tu wrote: >>>> ../patch_clk_v5_1122/0004-arm64-dts-meson-add-S4-Soc-Peripheral-clock-controll.patch >>>> has no obvious style problems and is ready for submission. >>>> >>> >>> This is a checkpatch output. I am talking about DTS broken. dtc should >>> warn you. >> >> Do you mean I will have wraning in compiling? >> I actually compiled without warning. >> ccf$ make ARCH=arm64 dtbs -j12 >> DTC arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dtb >> > > Nope: > > ../arch/arm64/boot/dts/amlogic/meson-s4.dtsi:105.35-127.6: Warning > (unit_address_vs_reg): /soc/apb4@fe000000/clock-controller: node has a > reg or ranges property, but no unit name > > Test your patches better before using reviewers time for trivial > compile-time fixes. The same rules for C code apply for DTS. > Like this: clkc_periphs: clock-controller@0 { compatible = "amlogic,s4-peripherals-clkc"; reg = <0x0 0x0 0x0 0x49c>; You mean it should be, right? > Best regards, > Krzysztof > > . _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT @ 2022-11-23 14:23 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 14:23 UTC (permalink / raw) To: Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 2022/11/23 22:12, Krzysztof Kozlowski wrote: > [ EXTERNAL EMAIL ] > > On 23/11/2022 14:23, Yu Tu wrote: >>>> ../patch_clk_v5_1122/0004-arm64-dts-meson-add-S4-Soc-Peripheral-clock-controll.patch >>>> has no obvious style problems and is ready for submission. >>>> >>> >>> This is a checkpatch output. I am talking about DTS broken. dtc should >>> warn you. >> >> Do you mean I will have wraning in compiling? >> I actually compiled without warning. >> ccf$ make ARCH=arm64 dtbs -j12 >> DTC arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dtb >> > > Nope: > > ../arch/arm64/boot/dts/amlogic/meson-s4.dtsi:105.35-127.6: Warning > (unit_address_vs_reg): /soc/apb4@fe000000/clock-controller: node has a > reg or ranges property, but no unit name > > Test your patches better before using reviewers time for trivial > compile-time fixes. The same rules for C code apply for DTS. > Like this: clkc_periphs: clock-controller@0 { compatible = "amlogic,s4-peripherals-clkc"; reg = <0x0 0x0 0x0 0x49c>; You mean it should be, right? > Best regards, > Krzysztof > > . ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT 2022-11-23 10:10 ` Krzysztof Kozlowski (?) @ 2022-11-23 13:27 ` Neil Armstrong -1 siblings, 0 replies; 109+ messages in thread From: Neil Armstrong @ 2022-11-23 13:27 UTC (permalink / raw) To: Krzysztof Kozlowski, Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 11:10, Krzysztof Kozlowski wrote: > On 23/11/2022 03:13, Yu Tu wrote: >> Added information about the S4 SOC Peripheral Clock controller in DT. >> >> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >> --- >> arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 26 +++++++++++++++++++++++ >> 1 file changed, 26 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >> index bd9c2ef83314..e7fab6e400be 100644 >> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >> @@ -6,6 +6,8 @@ >> #include <dt-bindings/interrupt-controller/irq.h> >> #include <dt-bindings/interrupt-controller/arm-gic.h> >> #include <dt-bindings/gpio/gpio.h> >> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> >> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> >> >> / { >> cpus { >> @@ -100,6 +102,30 @@ clkc_pll: clock-controller@8000 { >> #clock-cells = <1>; >> }; >> >> + clkc_periphs: clock-controller { >> + compatible = "amlogic,s4-peripherals-clkc"; >> + reg = <0x0 0x0 0x0 0x49c>; > > This is broken... did you check for warnings? This is actually fine, the parent node has a ranges property: https://github.com/torvalds/linux/blob/eb7081409f94a9a8608593d0fb63a1aa3d6f95d8/arch/arm64/boot/dts/amlogic/meson-s4.dtsi#L93 Neil > > > Best regards, > Krzysztof > > > _______________________________________________ > linux-amlogic mailing list > linux-amlogic@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-amlogic _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT @ 2022-11-23 13:27 ` Neil Armstrong 0 siblings, 0 replies; 109+ messages in thread From: Neil Armstrong @ 2022-11-23 13:27 UTC (permalink / raw) To: Krzysztof Kozlowski, Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 11:10, Krzysztof Kozlowski wrote: > On 23/11/2022 03:13, Yu Tu wrote: >> Added information about the S4 SOC Peripheral Clock controller in DT. >> >> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >> --- >> arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 26 +++++++++++++++++++++++ >> 1 file changed, 26 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >> index bd9c2ef83314..e7fab6e400be 100644 >> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >> @@ -6,6 +6,8 @@ >> #include <dt-bindings/interrupt-controller/irq.h> >> #include <dt-bindings/interrupt-controller/arm-gic.h> >> #include <dt-bindings/gpio/gpio.h> >> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> >> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> >> >> / { >> cpus { >> @@ -100,6 +102,30 @@ clkc_pll: clock-controller@8000 { >> #clock-cells = <1>; >> }; >> >> + clkc_periphs: clock-controller { >> + compatible = "amlogic,s4-peripherals-clkc"; >> + reg = <0x0 0x0 0x0 0x49c>; > > This is broken... did you check for warnings? This is actually fine, the parent node has a ranges property: https://github.com/torvalds/linux/blob/eb7081409f94a9a8608593d0fb63a1aa3d6f95d8/arch/arm64/boot/dts/amlogic/meson-s4.dtsi#L93 Neil > > > Best regards, > Krzysztof > > > _______________________________________________ > linux-amlogic mailing list > linux-amlogic@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT @ 2022-11-23 13:27 ` Neil Armstrong 0 siblings, 0 replies; 109+ messages in thread From: Neil Armstrong @ 2022-11-23 13:27 UTC (permalink / raw) To: Krzysztof Kozlowski, Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 11:10, Krzysztof Kozlowski wrote: > On 23/11/2022 03:13, Yu Tu wrote: >> Added information about the S4 SOC Peripheral Clock controller in DT. >> >> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >> --- >> arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 26 +++++++++++++++++++++++ >> 1 file changed, 26 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >> index bd9c2ef83314..e7fab6e400be 100644 >> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >> @@ -6,6 +6,8 @@ >> #include <dt-bindings/interrupt-controller/irq.h> >> #include <dt-bindings/interrupt-controller/arm-gic.h> >> #include <dt-bindings/gpio/gpio.h> >> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> >> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> >> >> / { >> cpus { >> @@ -100,6 +102,30 @@ clkc_pll: clock-controller@8000 { >> #clock-cells = <1>; >> }; >> >> + clkc_periphs: clock-controller { >> + compatible = "amlogic,s4-peripherals-clkc"; >> + reg = <0x0 0x0 0x0 0x49c>; > > This is broken... did you check for warnings? This is actually fine, the parent node has a ranges property: https://github.com/torvalds/linux/blob/eb7081409f94a9a8608593d0fb63a1aa3d6f95d8/arch/arm64/boot/dts/amlogic/meson-s4.dtsi#L93 Neil > > > Best regards, > Krzysztof > > > _______________________________________________ > linux-amlogic mailing list > linux-amlogic@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-amlogic _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT 2022-11-23 13:27 ` Neil Armstrong (?) @ 2022-11-23 13:38 ` Yu Tu -1 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 13:38 UTC (permalink / raw) To: neil.armstrong, Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang Hi Neil, Thanks for your reply and explanation. On 2022/11/23 21:27, Neil Armstrong wrote: > [ EXTERNAL EMAIL ] > > On 23/11/2022 11:10, Krzysztof Kozlowski wrote: >> On 23/11/2022 03:13, Yu Tu wrote: >>> Added information about the S4 SOC Peripheral Clock controller in DT. >>> >>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>> --- >>> arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 26 +++++++++++++++++++++++ >>> 1 file changed, 26 insertions(+) >>> >>> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>> b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>> index bd9c2ef83314..e7fab6e400be 100644 >>> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>> @@ -6,6 +6,8 @@ >>> #include <dt-bindings/interrupt-controller/irq.h> >>> #include <dt-bindings/interrupt-controller/arm-gic.h> >>> #include <dt-bindings/gpio/gpio.h> >>> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> >>> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> >>> / { >>> cpus { >>> @@ -100,6 +102,30 @@ clkc_pll: clock-controller@8000 { >>> #clock-cells = <1>; >>> }; >>> + clkc_periphs: clock-controller { >>> + compatible = "amlogic,s4-peripherals-clkc"; >>> + reg = <0x0 0x0 0x0 0x49c>; >> >> This is broken... did you check for warnings? > > This is actually fine, the parent node has a ranges property: > https://github.com/torvalds/linux/blob/eb7081409f94a9a8608593d0fb63a1aa3d6f95d8/arch/arm64/boot/dts/amlogic/meson-s4.dtsi#L93 > > > Neil > >> >> >> Best regards, >> Krzysztof >> >> >> _______________________________________________ >> linux-amlogic mailing list >> linux-amlogic@lists.infradead.org >> http://lists.infradead.org/mailman/listinfo/linux-amlogic > > . _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT @ 2022-11-23 13:38 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 13:38 UTC (permalink / raw) To: neil.armstrong, Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang Hi Neil, Thanks for your reply and explanation. On 2022/11/23 21:27, Neil Armstrong wrote: > [ EXTERNAL EMAIL ] > > On 23/11/2022 11:10, Krzysztof Kozlowski wrote: >> On 23/11/2022 03:13, Yu Tu wrote: >>> Added information about the S4 SOC Peripheral Clock controller in DT. >>> >>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>> --- >>> arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 26 +++++++++++++++++++++++ >>> 1 file changed, 26 insertions(+) >>> >>> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>> b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>> index bd9c2ef83314..e7fab6e400be 100644 >>> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>> @@ -6,6 +6,8 @@ >>> #include <dt-bindings/interrupt-controller/irq.h> >>> #include <dt-bindings/interrupt-controller/arm-gic.h> >>> #include <dt-bindings/gpio/gpio.h> >>> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> >>> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> >>> / { >>> cpus { >>> @@ -100,6 +102,30 @@ clkc_pll: clock-controller@8000 { >>> #clock-cells = <1>; >>> }; >>> + clkc_periphs: clock-controller { >>> + compatible = "amlogic,s4-peripherals-clkc"; >>> + reg = <0x0 0x0 0x0 0x49c>; >> >> This is broken... did you check for warnings? > > This is actually fine, the parent node has a ranges property: > https://github.com/torvalds/linux/blob/eb7081409f94a9a8608593d0fb63a1aa3d6f95d8/arch/arm64/boot/dts/amlogic/meson-s4.dtsi#L93 > > > Neil > >> >> >> Best regards, >> Krzysztof >> >> >> _______________________________________________ >> linux-amlogic mailing list >> linux-amlogic@lists.infradead.org >> http://lists.infradead.org/mailman/listinfo/linux-amlogic > > . ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT @ 2022-11-23 13:38 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 13:38 UTC (permalink / raw) To: neil.armstrong, Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang Hi Neil, Thanks for your reply and explanation. On 2022/11/23 21:27, Neil Armstrong wrote: > [ EXTERNAL EMAIL ] > > On 23/11/2022 11:10, Krzysztof Kozlowski wrote: >> On 23/11/2022 03:13, Yu Tu wrote: >>> Added information about the S4 SOC Peripheral Clock controller in DT. >>> >>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>> --- >>> arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 26 +++++++++++++++++++++++ >>> 1 file changed, 26 insertions(+) >>> >>> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>> b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>> index bd9c2ef83314..e7fab6e400be 100644 >>> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>> @@ -6,6 +6,8 @@ >>> #include <dt-bindings/interrupt-controller/irq.h> >>> #include <dt-bindings/interrupt-controller/arm-gic.h> >>> #include <dt-bindings/gpio/gpio.h> >>> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> >>> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> >>> / { >>> cpus { >>> @@ -100,6 +102,30 @@ clkc_pll: clock-controller@8000 { >>> #clock-cells = <1>; >>> }; >>> + clkc_periphs: clock-controller { >>> + compatible = "amlogic,s4-peripherals-clkc"; >>> + reg = <0x0 0x0 0x0 0x49c>; >> >> This is broken... did you check for warnings? > > This is actually fine, the parent node has a ranges property: > https://github.com/torvalds/linux/blob/eb7081409f94a9a8608593d0fb63a1aa3d6f95d8/arch/arm64/boot/dts/amlogic/meson-s4.dtsi#L93 > > > Neil > >> >> >> Best regards, >> Krzysztof >> >> >> _______________________________________________ >> linux-amlogic mailing list >> linux-amlogic@lists.infradead.org >> http://lists.infradead.org/mailman/listinfo/linux-amlogic > > . _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT 2022-11-23 13:27 ` Neil Armstrong (?) @ 2022-11-23 14:13 ` Krzysztof Kozlowski -1 siblings, 0 replies; 109+ messages in thread From: Krzysztof Kozlowski @ 2022-11-23 14:13 UTC (permalink / raw) To: neil.armstrong, Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 14:27, Neil Armstrong wrote: > On 23/11/2022 11:10, Krzysztof Kozlowski wrote: >> On 23/11/2022 03:13, Yu Tu wrote: >>> Added information about the S4 SOC Peripheral Clock controller in DT. >>> >>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>> --- >>> arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 26 +++++++++++++++++++++++ >>> 1 file changed, 26 insertions(+) >>> >>> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>> index bd9c2ef83314..e7fab6e400be 100644 >>> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>> @@ -6,6 +6,8 @@ >>> #include <dt-bindings/interrupt-controller/irq.h> >>> #include <dt-bindings/interrupt-controller/arm-gic.h> >>> #include <dt-bindings/gpio/gpio.h> >>> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> >>> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> >>> >>> / { >>> cpus { >>> @@ -100,6 +102,30 @@ clkc_pll: clock-controller@8000 { >>> #clock-cells = <1>; >>> }; >>> >>> + clkc_periphs: clock-controller { >>> + compatible = "amlogic,s4-peripherals-clkc"; >>> + reg = <0x0 0x0 0x0 0x49c>; >> >> This is broken... did you check for warnings? > > This is actually fine, the parent node has a ranges property: > https://github.com/torvalds/linux/blob/eb7081409f94a9a8608593d0fb63a1aa3d6f95d8/arch/arm64/boot/dts/amlogic/meson-s4.dtsi#L93 The parent ranges do not change here anything. You cannot have a reg without unit address and the tools report it. No need to use reviewers for this... Best regards, Krzysztof ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT @ 2022-11-23 14:13 ` Krzysztof Kozlowski 0 siblings, 0 replies; 109+ messages in thread From: Krzysztof Kozlowski @ 2022-11-23 14:13 UTC (permalink / raw) To: neil.armstrong, Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 14:27, Neil Armstrong wrote: > On 23/11/2022 11:10, Krzysztof Kozlowski wrote: >> On 23/11/2022 03:13, Yu Tu wrote: >>> Added information about the S4 SOC Peripheral Clock controller in DT. >>> >>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>> --- >>> arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 26 +++++++++++++++++++++++ >>> 1 file changed, 26 insertions(+) >>> >>> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>> index bd9c2ef83314..e7fab6e400be 100644 >>> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>> @@ -6,6 +6,8 @@ >>> #include <dt-bindings/interrupt-controller/irq.h> >>> #include <dt-bindings/interrupt-controller/arm-gic.h> >>> #include <dt-bindings/gpio/gpio.h> >>> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> >>> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> >>> >>> / { >>> cpus { >>> @@ -100,6 +102,30 @@ clkc_pll: clock-controller@8000 { >>> #clock-cells = <1>; >>> }; >>> >>> + clkc_periphs: clock-controller { >>> + compatible = "amlogic,s4-peripherals-clkc"; >>> + reg = <0x0 0x0 0x0 0x49c>; >> >> This is broken... did you check for warnings? > > This is actually fine, the parent node has a ranges property: > https://github.com/torvalds/linux/blob/eb7081409f94a9a8608593d0fb63a1aa3d6f95d8/arch/arm64/boot/dts/amlogic/meson-s4.dtsi#L93 The parent ranges do not change here anything. You cannot have a reg without unit address and the tools report it. No need to use reviewers for this... Best regards, Krzysztof _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT @ 2022-11-23 14:13 ` Krzysztof Kozlowski 0 siblings, 0 replies; 109+ messages in thread From: Krzysztof Kozlowski @ 2022-11-23 14:13 UTC (permalink / raw) To: neil.armstrong, Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 14:27, Neil Armstrong wrote: > On 23/11/2022 11:10, Krzysztof Kozlowski wrote: >> On 23/11/2022 03:13, Yu Tu wrote: >>> Added information about the S4 SOC Peripheral Clock controller in DT. >>> >>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>> --- >>> arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 26 +++++++++++++++++++++++ >>> 1 file changed, 26 insertions(+) >>> >>> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>> index bd9c2ef83314..e7fab6e400be 100644 >>> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>> @@ -6,6 +6,8 @@ >>> #include <dt-bindings/interrupt-controller/irq.h> >>> #include <dt-bindings/interrupt-controller/arm-gic.h> >>> #include <dt-bindings/gpio/gpio.h> >>> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> >>> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> >>> >>> / { >>> cpus { >>> @@ -100,6 +102,30 @@ clkc_pll: clock-controller@8000 { >>> #clock-cells = <1>; >>> }; >>> >>> + clkc_periphs: clock-controller { >>> + compatible = "amlogic,s4-peripherals-clkc"; >>> + reg = <0x0 0x0 0x0 0x49c>; >> >> This is broken... did you check for warnings? > > This is actually fine, the parent node has a ranges property: > https://github.com/torvalds/linux/blob/eb7081409f94a9a8608593d0fb63a1aa3d6f95d8/arch/arm64/boot/dts/amlogic/meson-s4.dtsi#L93 The parent ranges do not change here anything. You cannot have a reg without unit address and the tools report it. No need to use reviewers for this... Best regards, Krzysztof _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT 2022-11-23 14:13 ` Krzysztof Kozlowski (?) @ 2022-11-23 14:21 ` neil.armstrong -1 siblings, 0 replies; 109+ messages in thread From: neil.armstrong @ 2022-11-23 14:21 UTC (permalink / raw) To: Krzysztof Kozlowski, Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 15:13, Krzysztof Kozlowski wrote: > On 23/11/2022 14:27, Neil Armstrong wrote: >> On 23/11/2022 11:10, Krzysztof Kozlowski wrote: >>> On 23/11/2022 03:13, Yu Tu wrote: >>>> Added information about the S4 SOC Peripheral Clock controller in DT. >>>> >>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>> --- >>>> arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 26 +++++++++++++++++++++++ >>>> 1 file changed, 26 insertions(+) >>>> >>>> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>>> index bd9c2ef83314..e7fab6e400be 100644 >>>> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>>> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>>> @@ -6,6 +6,8 @@ >>>> #include <dt-bindings/interrupt-controller/irq.h> >>>> #include <dt-bindings/interrupt-controller/arm-gic.h> >>>> #include <dt-bindings/gpio/gpio.h> >>>> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> >>>> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> >>>> >>>> / { >>>> cpus { >>>> @@ -100,6 +102,30 @@ clkc_pll: clock-controller@8000 { >>>> #clock-cells = <1>; >>>> }; >>>> >>>> + clkc_periphs: clock-controller { >>>> + compatible = "amlogic,s4-peripherals-clkc"; >>>> + reg = <0x0 0x0 0x0 0x49c>; >>> >>> This is broken... did you check for warnings? >> >> This is actually fine, the parent node has a ranges property: >> https://github.com/torvalds/linux/blob/eb7081409f94a9a8608593d0fb63a1aa3d6f95d8/arch/arm64/boot/dts/amlogic/meson-s4.dtsi#L93 > > The parent ranges do not change here anything. You cannot have a reg > without unit address and the tools report it. No need to use reviewers > for this... Oh I see now, I simply looked at the reg property, not the unit address. Sorry indeed it's wrong and DTC should complain. Yu, you should probably update your DTC version. Neil > > Best regards, > Krzysztof > _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT @ 2022-11-23 14:21 ` neil.armstrong 0 siblings, 0 replies; 109+ messages in thread From: neil.armstrong @ 2022-11-23 14:21 UTC (permalink / raw) To: Krzysztof Kozlowski, Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 15:13, Krzysztof Kozlowski wrote: > On 23/11/2022 14:27, Neil Armstrong wrote: >> On 23/11/2022 11:10, Krzysztof Kozlowski wrote: >>> On 23/11/2022 03:13, Yu Tu wrote: >>>> Added information about the S4 SOC Peripheral Clock controller in DT. >>>> >>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>> --- >>>> arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 26 +++++++++++++++++++++++ >>>> 1 file changed, 26 insertions(+) >>>> >>>> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>>> index bd9c2ef83314..e7fab6e400be 100644 >>>> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>>> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>>> @@ -6,6 +6,8 @@ >>>> #include <dt-bindings/interrupt-controller/irq.h> >>>> #include <dt-bindings/interrupt-controller/arm-gic.h> >>>> #include <dt-bindings/gpio/gpio.h> >>>> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> >>>> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> >>>> >>>> / { >>>> cpus { >>>> @@ -100,6 +102,30 @@ clkc_pll: clock-controller@8000 { >>>> #clock-cells = <1>; >>>> }; >>>> >>>> + clkc_periphs: clock-controller { >>>> + compatible = "amlogic,s4-peripherals-clkc"; >>>> + reg = <0x0 0x0 0x0 0x49c>; >>> >>> This is broken... did you check for warnings? >> >> This is actually fine, the parent node has a ranges property: >> https://github.com/torvalds/linux/blob/eb7081409f94a9a8608593d0fb63a1aa3d6f95d8/arch/arm64/boot/dts/amlogic/meson-s4.dtsi#L93 > > The parent ranges do not change here anything. You cannot have a reg > without unit address and the tools report it. No need to use reviewers > for this... Oh I see now, I simply looked at the reg property, not the unit address. Sorry indeed it's wrong and DTC should complain. Yu, you should probably update your DTC version. Neil > > Best regards, > Krzysztof > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT @ 2022-11-23 14:21 ` neil.armstrong 0 siblings, 0 replies; 109+ messages in thread From: neil.armstrong @ 2022-11-23 14:21 UTC (permalink / raw) To: Krzysztof Kozlowski, Yu Tu, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 23/11/2022 15:13, Krzysztof Kozlowski wrote: > On 23/11/2022 14:27, Neil Armstrong wrote: >> On 23/11/2022 11:10, Krzysztof Kozlowski wrote: >>> On 23/11/2022 03:13, Yu Tu wrote: >>>> Added information about the S4 SOC Peripheral Clock controller in DT. >>>> >>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>> --- >>>> arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 26 +++++++++++++++++++++++ >>>> 1 file changed, 26 insertions(+) >>>> >>>> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>>> index bd9c2ef83314..e7fab6e400be 100644 >>>> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>>> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>>> @@ -6,6 +6,8 @@ >>>> #include <dt-bindings/interrupt-controller/irq.h> >>>> #include <dt-bindings/interrupt-controller/arm-gic.h> >>>> #include <dt-bindings/gpio/gpio.h> >>>> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> >>>> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> >>>> >>>> / { >>>> cpus { >>>> @@ -100,6 +102,30 @@ clkc_pll: clock-controller@8000 { >>>> #clock-cells = <1>; >>>> }; >>>> >>>> + clkc_periphs: clock-controller { >>>> + compatible = "amlogic,s4-peripherals-clkc"; >>>> + reg = <0x0 0x0 0x0 0x49c>; >>> >>> This is broken... did you check for warnings? >> >> This is actually fine, the parent node has a ranges property: >> https://github.com/torvalds/linux/blob/eb7081409f94a9a8608593d0fb63a1aa3d6f95d8/arch/arm64/boot/dts/amlogic/meson-s4.dtsi#L93 > > The parent ranges do not change here anything. You cannot have a reg > without unit address and the tools report it. No need to use reviewers > for this... Oh I see now, I simply looked at the reg property, not the unit address. Sorry indeed it's wrong and DTC should complain. Yu, you should probably update your DTC version. Neil > > Best regards, > Krzysztof > ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT 2022-11-23 14:21 ` neil.armstrong (?) @ 2022-11-23 14:27 ` Yu Tu -1 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 14:27 UTC (permalink / raw) To: neil.armstrong, Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 2022/11/23 22:21, neil.armstrong@linaro.org wrote: > [ EXTERNAL EMAIL ] > > On 23/11/2022 15:13, Krzysztof Kozlowski wrote: >> On 23/11/2022 14:27, Neil Armstrong wrote: >>> On 23/11/2022 11:10, Krzysztof Kozlowski wrote: >>>> On 23/11/2022 03:13, Yu Tu wrote: >>>>> Added information about the S4 SOC Peripheral Clock controller in DT. >>>>> >>>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>>> --- >>>>> arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 26 >>>>> +++++++++++++++++++++++ >>>>> 1 file changed, 26 insertions(+) >>>>> >>>>> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>>>> b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>>>> index bd9c2ef83314..e7fab6e400be 100644 >>>>> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>>>> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>>>> @@ -6,6 +6,8 @@ >>>>> #include <dt-bindings/interrupt-controller/irq.h> >>>>> #include <dt-bindings/interrupt-controller/arm-gic.h> >>>>> #include <dt-bindings/gpio/gpio.h> >>>>> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> >>>>> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> >>>>> / { >>>>> cpus { >>>>> @@ -100,6 +102,30 @@ clkc_pll: clock-controller@8000 { >>>>> #clock-cells = <1>; >>>>> }; >>>>> + clkc_periphs: clock-controller { >>>>> + compatible = "amlogic,s4-peripherals-clkc"; >>>>> + reg = <0x0 0x0 0x0 0x49c>; >>>> >>>> This is broken... did you check for warnings? >>> >>> This is actually fine, the parent node has a ranges property: >>> https://github.com/torvalds/linux/blob/eb7081409f94a9a8608593d0fb63a1aa3d6f95d8/arch/arm64/boot/dts/amlogic/meson-s4.dtsi#L93 >>> >> >> The parent ranges do not change here anything. You cannot have a reg >> without unit address and the tools report it. No need to use reviewers >> for this... > > Oh I see now, I simply looked at the reg property, not the unit address. > > Sorry indeed it's wrong and DTC should complain. > > Yu, you should probably update your DTC version. Okay. > > Neil > >> >> Best regards, >> Krzysztof >> > > . _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT @ 2022-11-23 14:27 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 14:27 UTC (permalink / raw) To: neil.armstrong, Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 2022/11/23 22:21, neil.armstrong@linaro.org wrote: > [ EXTERNAL EMAIL ] > > On 23/11/2022 15:13, Krzysztof Kozlowski wrote: >> On 23/11/2022 14:27, Neil Armstrong wrote: >>> On 23/11/2022 11:10, Krzysztof Kozlowski wrote: >>>> On 23/11/2022 03:13, Yu Tu wrote: >>>>> Added information about the S4 SOC Peripheral Clock controller in DT. >>>>> >>>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>>> --- >>>>> arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 26 >>>>> +++++++++++++++++++++++ >>>>> 1 file changed, 26 insertions(+) >>>>> >>>>> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>>>> b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>>>> index bd9c2ef83314..e7fab6e400be 100644 >>>>> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>>>> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>>>> @@ -6,6 +6,8 @@ >>>>> #include <dt-bindings/interrupt-controller/irq.h> >>>>> #include <dt-bindings/interrupt-controller/arm-gic.h> >>>>> #include <dt-bindings/gpio/gpio.h> >>>>> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> >>>>> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> >>>>> / { >>>>> cpus { >>>>> @@ -100,6 +102,30 @@ clkc_pll: clock-controller@8000 { >>>>> #clock-cells = <1>; >>>>> }; >>>>> + clkc_periphs: clock-controller { >>>>> + compatible = "amlogic,s4-peripherals-clkc"; >>>>> + reg = <0x0 0x0 0x0 0x49c>; >>>> >>>> This is broken... did you check for warnings? >>> >>> This is actually fine, the parent node has a ranges property: >>> https://github.com/torvalds/linux/blob/eb7081409f94a9a8608593d0fb63a1aa3d6f95d8/arch/arm64/boot/dts/amlogic/meson-s4.dtsi#L93 >>> >> >> The parent ranges do not change here anything. You cannot have a reg >> without unit address and the tools report it. No need to use reviewers >> for this... > > Oh I see now, I simply looked at the reg property, not the unit address. > > Sorry indeed it's wrong and DTC should complain. > > Yu, you should probably update your DTC version. Okay. > > Neil > >> >> Best regards, >> Krzysztof >> > > . ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT @ 2022-11-23 14:27 ` Yu Tu 0 siblings, 0 replies; 109+ messages in thread From: Yu Tu @ 2022-11-23 14:27 UTC (permalink / raw) To: neil.armstrong, Krzysztof Kozlowski, linux-clk, linux-arm-kernel, linux-amlogic, linux-kernel, devicetree, Rob Herring, Neil Armstrong, Jerome Brunet, Kevin Hilman, Michael Turquette, Stephen Boyd, Krzysztof Kozlowski, Martin Blumenstingl Cc: kelvin.zhang On 2022/11/23 22:21, neil.armstrong@linaro.org wrote: > [ EXTERNAL EMAIL ] > > On 23/11/2022 15:13, Krzysztof Kozlowski wrote: >> On 23/11/2022 14:27, Neil Armstrong wrote: >>> On 23/11/2022 11:10, Krzysztof Kozlowski wrote: >>>> On 23/11/2022 03:13, Yu Tu wrote: >>>>> Added information about the S4 SOC Peripheral Clock controller in DT. >>>>> >>>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com> >>>>> --- >>>>> arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 26 >>>>> +++++++++++++++++++++++ >>>>> 1 file changed, 26 insertions(+) >>>>> >>>>> diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>>>> b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>>>> index bd9c2ef83314..e7fab6e400be 100644 >>>>> --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>>>> +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi >>>>> @@ -6,6 +6,8 @@ >>>>> #include <dt-bindings/interrupt-controller/irq.h> >>>>> #include <dt-bindings/interrupt-controller/arm-gic.h> >>>>> #include <dt-bindings/gpio/gpio.h> >>>>> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> >>>>> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> >>>>> / { >>>>> cpus { >>>>> @@ -100,6 +102,30 @@ clkc_pll: clock-controller@8000 { >>>>> #clock-cells = <1>; >>>>> }; >>>>> + clkc_periphs: clock-controller { >>>>> + compatible = "amlogic,s4-peripherals-clkc"; >>>>> + reg = <0x0 0x0 0x0 0x49c>; >>>> >>>> This is broken... did you check for warnings? >>> >>> This is actually fine, the parent node has a ranges property: >>> https://github.com/torvalds/linux/blob/eb7081409f94a9a8608593d0fb63a1aa3d6f95d8/arch/arm64/boot/dts/amlogic/meson-s4.dtsi#L93 >>> >> >> The parent ranges do not change here anything. You cannot have a reg >> without unit address and the tools report it. No need to use reviewers >> for this... > > Oh I see now, I simply looked at the reg property, not the unit address. > > Sorry indeed it's wrong and DTC should complain. > > Yu, you should probably update your DTC version. Okay. > > Neil > >> >> Best regards, >> Krzysztof >> > > . _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 109+ messages in thread
* Re: [PATCH V5 0/4] Add S4 SoC PLL and Peripheral clock controller 2022-11-23 2:13 ` Yu Tu ` (5 preceding siblings ...) (?) @ 2022-11-23 13:29 ` Neil Armstrong -1 siblings, 0 replies; 109+ messages in thread From: Neil Armstrong @ 2022-11-23 13:29 UTC (permalink / raw) To: linux-amlogic Hi, On 23/11/2022 03:13, Yu Tu wrote: > 1. Add PLL and Peripheral clock controller driver for S4 SOC. > > Yu Tu (4): > clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and > bindings > arm64: dts: meson: add S4 Soc PLL clock controller in DT > clk: meson: s4: add s4 SoC peripheral clock controller driver and > bindings > arm64: dts: meson: add S4 Soc Peripheral clock controller in DT My correct e-mail is neil.armstrong@linaro.org and not narmstrong@linaro.org, please fix it for future versions. Thanks, Neil > > V4 -> V5: change format and clock flags and adjust the patch series as suggested > by Jerome. > V3 -> V4: change format and clock flags. > V2 -> V3: Use two clock controller. > V1 -> V2: Change format as discussed in the email. > > Link:https://lore.kernel.org/all/20220823022630.25007-1-yu.tu@amlogic.com/ > > .../clock/amlogic,s4-peripherals-clkc.yaml | 105 + > .../bindings/clock/amlogic,s4-pll-clkc.yaml | 51 + > MAINTAINERS | 1 + > arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 34 + > drivers/clk/meson/Kconfig | 25 + > drivers/clk/meson/Makefile | 2 + > drivers/clk/meson/s4-peripherals.c | 3783 +++++++++++++++++ > drivers/clk/meson/s4-peripherals.h | 218 + > drivers/clk/meson/s4-pll.c | 875 ++++ > drivers/clk/meson/s4-pll.h | 88 + > .../clock/amlogic,s4-peripherals-clkc.h | 131 + > .../dt-bindings/clock/amlogic,s4-pll-clkc.h | 30 + > 12 files changed, 5343 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-peripherals-clkc.yaml > create mode 100644 Documentation/devicetree/bindings/clock/amlogic,s4-pll-clkc.yaml > create mode 100644 drivers/clk/meson/s4-peripherals.c > create mode 100644 drivers/clk/meson/s4-peripherals.h > create mode 100644 drivers/clk/meson/s4-pll.c > create mode 100644 drivers/clk/meson/s4-pll.h > create mode 100644 include/dt-bindings/clock/amlogic,s4-peripherals-clkc.h > create mode 100644 include/dt-bindings/clock/amlogic,s4-pll-clkc.h > > > base-commit: 5eeec1fd8360d57899d29a607ff81d0094e6cf59 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic ^ permalink raw reply [flat|nested] 109+ messages in thread
end of thread, other threads:[~2022-12-01 11:34 UTC | newest] Thread overview: 109+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2022-11-23 2:13 [PATCH V5 0/4] Add S4 SoC PLL and Peripheral clock controller Yu Tu 2022-11-23 2:13 ` Yu Tu 2022-11-23 2:13 ` Yu Tu 2022-11-23 2:13 ` [PATCH V5 1/4] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver and bindings Yu Tu 2022-11-23 2:13 ` Yu Tu 2022-11-23 2:13 ` Yu Tu 2022-11-23 10:08 ` Krzysztof Kozlowski 2022-11-23 10:08 ` Krzysztof Kozlowski 2022-11-23 10:08 ` Krzysztof Kozlowski 2022-11-23 11:16 ` Yu Tu 2022-11-23 11:16 ` Yu Tu 2022-11-23 11:16 ` Yu Tu 2022-11-23 13:05 ` Krzysztof Kozlowski 2022-11-23 13:05 ` Krzysztof Kozlowski 2022-11-23 13:05 ` Krzysztof Kozlowski 2022-11-23 13:23 ` Neil Armstrong 2022-11-23 13:23 ` Neil Armstrong 2022-11-23 13:23 ` Neil Armstrong 2022-11-23 13:53 ` Krzysztof Kozlowski 2022-11-23 13:53 ` Krzysztof Kozlowski 2022-11-23 13:53 ` Krzysztof Kozlowski 2022-11-25 9:23 ` Jerome Brunet 2022-11-25 9:23 ` Jerome Brunet 2022-11-25 9:23 ` Jerome Brunet 2022-11-28 7:39 ` Yu Tu 2022-11-28 7:39 ` Yu Tu 2022-11-28 7:39 ` Yu Tu 2022-11-28 12:33 ` Jerome Brunet 2022-11-28 12:33 ` Jerome Brunet 2022-11-28 12:33 ` Jerome Brunet 2022-11-28 13:30 ` Yu Tu 2022-11-28 13:30 ` Yu Tu 2022-11-28 13:30 ` Yu Tu 2022-12-01 8:36 ` neil.armstrong 2022-12-01 8:36 ` neil.armstrong 2022-12-01 8:36 ` neil.armstrong 2022-12-01 11:33 ` Yu Tu 2022-12-01 11:33 ` Yu Tu 2022-12-01 11:33 ` Yu Tu 2022-11-23 13:54 ` Yu Tu 2022-11-23 13:54 ` Yu Tu 2022-11-23 13:54 ` Yu Tu 2022-11-23 13:57 ` neil.armstrong 2022-11-23 13:57 ` neil.armstrong 2022-11-23 13:57 ` neil.armstrong 2022-11-23 2:13 ` [PATCH V5 2/4] arm64: dts: meson: add S4 Soc PLL clock controller in DT Yu Tu 2022-11-23 2:13 ` Yu Tu 2022-11-23 2:13 ` Yu Tu 2022-11-23 2:13 ` [PATCH V5 3/4] clk: meson: s4: add s4 SoC peripheral clock controller driver and bindings Yu Tu 2022-11-23 2:13 ` Yu Tu 2022-11-23 10:09 ` Krzysztof Kozlowski 2022-11-23 10:09 ` Krzysztof Kozlowski 2022-11-23 10:09 ` Krzysztof Kozlowski 2022-11-23 11:22 ` Yu Tu 2022-11-23 11:22 ` Yu Tu 2022-11-23 11:22 ` Yu Tu 2022-11-23 13:06 ` Krzysztof Kozlowski 2022-11-23 13:06 ` Krzysztof Kozlowski 2022-11-23 13:06 ` Krzysztof Kozlowski 2022-11-23 14:08 ` Yu Tu 2022-11-23 14:08 ` Yu Tu 2022-11-23 14:08 ` Yu Tu 2022-11-25 9:54 ` Jerome Brunet 2022-11-25 9:54 ` Jerome Brunet 2022-11-28 8:08 ` Yu Tu 2022-11-28 8:08 ` Yu Tu 2022-11-28 12:23 ` Jerome Brunet 2022-11-28 12:23 ` Jerome Brunet 2022-11-28 12:23 ` Jerome Brunet 2022-11-28 14:02 ` Yu Tu 2022-11-28 14:02 ` Yu Tu 2022-11-28 14:02 ` Yu Tu 2022-11-23 2:13 ` [PATCH V5 4/4] arm64: dts: meson: add S4 Soc Peripheral clock controller in DT Yu Tu 2022-11-23 2:13 ` Yu Tu 2022-11-23 2:13 ` Yu Tu 2022-11-23 10:10 ` Krzysztof Kozlowski 2022-11-23 10:10 ` Krzysztof Kozlowski 2022-11-23 10:10 ` Krzysztof Kozlowski 2022-11-23 11:27 ` Yu Tu 2022-11-23 11:27 ` Yu Tu 2022-11-23 11:27 ` Yu Tu 2022-11-23 13:02 ` Krzysztof Kozlowski 2022-11-23 13:02 ` Krzysztof Kozlowski 2022-11-23 13:02 ` Krzysztof Kozlowski 2022-11-23 13:23 ` Yu Tu 2022-11-23 13:23 ` Yu Tu 2022-11-23 13:23 ` Yu Tu 2022-11-23 14:12 ` Krzysztof Kozlowski 2022-11-23 14:12 ` Krzysztof Kozlowski 2022-11-23 14:12 ` Krzysztof Kozlowski 2022-11-23 14:23 ` Yu Tu 2022-11-23 14:23 ` Yu Tu 2022-11-23 14:23 ` Yu Tu 2022-11-23 13:27 ` Neil Armstrong 2022-11-23 13:27 ` Neil Armstrong 2022-11-23 13:27 ` Neil Armstrong 2022-11-23 13:38 ` Yu Tu 2022-11-23 13:38 ` Yu Tu 2022-11-23 13:38 ` Yu Tu 2022-11-23 14:13 ` Krzysztof Kozlowski 2022-11-23 14:13 ` Krzysztof Kozlowski 2022-11-23 14:13 ` Krzysztof Kozlowski 2022-11-23 14:21 ` neil.armstrong 2022-11-23 14:21 ` neil.armstrong 2022-11-23 14:21 ` neil.armstrong 2022-11-23 14:27 ` Yu Tu 2022-11-23 14:27 ` Yu Tu 2022-11-23 14:27 ` Yu Tu 2022-11-23 13:29 ` [PATCH V5 0/4] Add S4 SoC PLL and Peripheral clock controller Neil Armstrong
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.