[PATCH v6 01/10] ARM: OMAP2+: nand: unify init functions

[Afzal Mohammed <afzal@ti.com>]

Helper function for updating nand platform data has been
added the capability to take timing structure arguement.
Usage of omap_nand_flash_init() has been replaced by modifed
one, omap_nand_flash_init was doing things similar to
board_nand_init except that NAND CS# were being acquired
based on bootloader setting. As CS# is hardwired for a given
board, acquiring gpmc CS# has been removed, and updated with
the value on board.

NAND CS# used in beagle board & omap3evm was found to be CS0.
Thomas Weber <thomas.weber.linux@googlemail.com> reported
that value of devkit8000 to be CS0. Overo board was found
to be using CS0 based on u-boot, while google grep says
omap3touchbook too has CS0.

Signed-off-by: Afzal Mohammed <afzal@ti.com>
Reviewed-by: Jon Hunter <jon-hunter@ti.com>
---

v6:	Modify nand init for OMAP3EVM too as support got added

 arch/arm/mach-omap2/board-devkit8000.c     |    8 ++++-
 arch/arm/mach-omap2/board-flash.c          |   45 ++++++++++++++-------------
 arch/arm/mach-omap2/board-flash.h          |    6 ++-
 arch/arm/mach-omap2/board-igep0020.c       |    2 +-
 arch/arm/mach-omap2/board-ldp.c            |    4 +-
 arch/arm/mach-omap2/board-omap3beagle.c    |    8 ++++-
 arch/arm/mach-omap2/board-omap3evm.c       |    8 ++++-
 arch/arm/mach-omap2/board-omap3touchbook.c |    8 ++++-
 arch/arm/mach-omap2/board-overo.c          |    7 +++-
 arch/arm/mach-omap2/board-zoom.c           |    5 ++-
 arch/arm/mach-omap2/common-board-devices.c |   46 ----------------------------
 arch/arm/mach-omap2/common-board-devices.h |    1 -
 12 files changed, 62 insertions(+), 86 deletions(-)

diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 6567c1c..6ee429a 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -59,8 +59,11 @@
 
 #include "mux.h"
 #include "hsmmc.h"
+#include "board-flash.h"
 #include "common-board-devices.h"
 
+#define	NAND_CS			0
+
 #define OMAP_DM9000_GPIO_IRQ	25
 #define OMAP3_DEVKIT_TS_GPIO	27
 
@@ -628,8 +631,9 @@ static void __init devkit8000_init(void)
 
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
-	omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions,
-			     ARRAY_SIZE(devkit8000_nand_partitions));
+	board_nand_init(devkit8000_nand_partitions,
+		ARRAY_SIZE(devkit8000_nand_partitions), NAND_CS,
+		NAND_BUSWIDTH_16, NULL);
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index 53c39d2..47fb903 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -103,41 +103,41 @@ __init board_onenand_init(struct mtd_partition *onenand_parts,
 		defined(CONFIG_MTD_NAND_OMAP2_MODULE)
 
 /* Note that all values in this struct are in nanoseconds */
-static struct gpmc_timings nand_timings = {
+struct gpmc_timings nand_default_timings[1] = {
+	{
+		.sync_clk = 0,
 
-	.sync_clk = 0,
+		.cs_on = 0,
+		.cs_rd_off = 36,
+		.cs_wr_off = 36,
 
-	.cs_on = 0,
-	.cs_rd_off = 36,
-	.cs_wr_off = 36,
+		.adv_on = 6,
+		.adv_rd_off = 24,
+		.adv_wr_off = 36,
 
-	.adv_on = 6,
-	.adv_rd_off = 24,
-	.adv_wr_off = 36,
+		.we_off = 30,
+		.oe_off = 48,
 
-	.we_off = 30,
-	.oe_off = 48,
+		.access = 54,
+		.rd_cycle = 72,
+		.wr_cycle = 72,
 
-	.access = 54,
-	.rd_cycle = 72,
-	.wr_cycle = 72,
-
-	.wr_access = 30,
-	.wr_data_mux_bus = 0,
+		.wr_access = 30,
+		.wr_data_mux_bus = 0,
+	},
 };
 
-static struct omap_nand_platform_data board_nand_data = {
-	.gpmc_t		= &nand_timings,
-};
+static struct omap_nand_platform_data board_nand_data;
 
 void
-__init board_nand_init(struct mtd_partition *nand_parts,
-			u8 nr_parts, u8 cs, int nand_type)
+__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
+				int nand_type, struct gpmc_timings *gpmc_t)
 {
 	board_nand_data.cs		= cs;
 	board_nand_data.parts		= nand_parts;
 	board_nand_data.nr_parts	= nr_parts;
 	board_nand_data.devsize		= nand_type;
+	board_nand_data.gpmc_t		= gpmc_t;
 
 	board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT;
 	board_nand_data.gpmc_irq = OMAP_GPMC_IRQ_BASE + cs;
@@ -238,5 +238,6 @@ void __init board_flash_init(struct flash_partitions partition_info[],
 		pr_err("NAND: Unable to find configuration in GPMC\n");
 	else
 		board_nand_init(partition_info[2].parts,
-			partition_info[2].nr_parts, nandcs, nand_type);
+			partition_info[2].nr_parts, nandcs,
+			nand_type, nand_default_timings);
 }
diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h
index c44b70d..a3aa5fc 100644
--- a/arch/arm/mach-omap2/board-flash.h
+++ b/arch/arm/mach-omap2/board-flash.h
@@ -40,12 +40,14 @@ static inline void board_flash_init(struct flash_partitions part[],
 #if defined(CONFIG_MTD_NAND_OMAP2) || \
 		defined(CONFIG_MTD_NAND_OMAP2_MODULE)
 extern void board_nand_init(struct mtd_partition *nand_parts,
-					u8 nr_parts, u8 cs, int nand_type);
+		u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t);
+extern struct gpmc_timings nand_default_timings[];
 #else
 static inline void board_nand_init(struct mtd_partition *nand_parts,
-					u8 nr_parts, u8 cs, int nand_type)
+		u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t)
 {
 }
+#define	nand_default_timings	NULL
 #endif
 
 #if defined(CONFIG_MTD_ONENAND_OMAP2) || \
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 2821448..b7401f7 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -175,7 +175,7 @@ static void __init igep_flash_init(void)
 		pr_info("IGEP: initializing NAND memory device\n");
 		board_nand_init(igep_flash_partitions,
 				ARRAY_SIZE(igep_flash_partitions),
-				0, NAND_BUSWIDTH_16);
+				0, NAND_BUSWIDTH_16, nand_default_timings);
 	} else if (mux == IGEP_SYSBOOT_ONENAND) {
 		pr_info("IGEP: initializing OneNAND memory device\n");
 		board_onenand_init(igep_flash_partitions,
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index ef9e829..5d8fa99 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -427,8 +427,8 @@ static void __init omap_ldp_init(void)
 	omap_serial_init();
 	omap_sdrc_init(NULL, NULL);
 	usb_musb_init(NULL);
-	board_nand_init(ldp_nand_partitions,
-		ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
+	board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions),
+				ZOOM_NAND_CS, 0, nand_default_timings);
 
 	omap_hsmmc_init(mmc);
 	ldp_display_init();
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 6202fc7..940ab49 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -51,8 +51,11 @@
 #include "mux.h"
 #include "hsmmc.h"
 #include "pm.h"
+#include "board-flash.h"
 #include "common-board-devices.h"
 
+#define	NAND_CS	0
+
 /*
  * OMAP3 Beagle revision
  * Run time detection of Beagle revision is done by reading GPIO.
@@ -517,8 +520,9 @@ static void __init omap3_beagle_init(void)
 
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
-	omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
-			     ARRAY_SIZE(omap3beagle_nand_partitions));
+	board_nand_init(omap3beagle_nand_partitions,
+		ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS,
+		NAND_BUSWIDTH_16, NULL);
 
 	/* Ensure msecure is mux'd to be able to set the RTC. */
 	omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH);
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 0d362e9..833c42c 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -57,6 +57,9 @@
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
+#include "board-flash.h"
+
+#define	NAND_CS			0
 
 #define OMAP3_EVM_TS_GPIO	175
 #define OMAP3_EVM_EHCI_VBUS	22
@@ -730,8 +733,9 @@ static void __init omap3_evm_init(void)
 	}
 	usb_musb_init(&musb_board_data);
 	usbhs_init(&usbhs_bdata);
-	omap_nand_flash_init(NAND_BUSWIDTH_16, omap3evm_nand_partitions,
-			     ARRAY_SIZE(omap3evm_nand_partitions));
+	board_nand_init(omap3evm_nand_partitions,
+		ARRAY_SIZE(omap3evm_nand_partitions), NAND_CS,
+		NAND_BUSWIDTH_16, NULL);
 
 	omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL);
 	omap3evm_init_smsc911x();
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 485d14d..75e07f6 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -52,6 +52,7 @@
 
 #include "mux.h"
 #include "hsmmc.h"
+#include "board-flash.h"
 #include "common-board-devices.h"
 
 #include <asm/setup.h>
@@ -61,6 +62,8 @@
 #define TB_BL_PWM_TIMER		9
 #define TB_KILL_POWER_GPIO	168
 
+#define	NAND_CS			0
+
 static unsigned long touchbook_revision;
 
 static struct mtd_partition omap3touchbook_nand_partitions[] = {
@@ -370,8 +373,9 @@ static void __init omap3_touchbook_init(void)
 	omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
-	omap_nand_flash_init(NAND_BUSWIDTH_16, omap3touchbook_nand_partitions,
-			     ARRAY_SIZE(omap3touchbook_nand_partitions));
+	board_nand_init(omap3touchbook_nand_partitions,
+		ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS,
+		NAND_BUSWIDTH_16, NULL);
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 779734d..56d5b9e 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -57,8 +57,11 @@
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "hsmmc.h"
+#include "board-flash.h"
 #include "common-board-devices.h"
 
+#define	NAND_CS			0
+
 #define OVERO_GPIO_BT_XGATE	15
 #define OVERO_GPIO_W2W_NRESET	16
 #define OVERO_GPIO_PENDOWN	114
@@ -500,8 +503,8 @@ static void __init overo_init(void)
 	omap_serial_init();
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
 				  mt46h32m32lf6_sdrc_params);
-	omap_nand_flash_init(0, overo_nand_partitions,
-			     ARRAY_SIZE(overo_nand_partitions));
+	board_nand_init(overo_nand_partitions,
+		ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	overo_spi_init();
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index 4e7e561..a04dd85 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -114,8 +114,9 @@ static void __init omap_zoom_init(void)
 		usbhs_init(&usbhs_bdata);
 	}
 
-	board_nand_init(zoom_nand_partitions, ARRAY_SIZE(zoom_nand_partitions),
-						ZOOM_NAND_CS, NAND_BUSWIDTH_16);
+	board_nand_init(zoom_nand_partitions,
+			ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS,
+			NAND_BUSWIDTH_16, nand_default_timings);
 	zoom_debugboard_init();
 	zoom_peripherals_init();
 
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index c187586..3aef3a9 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -95,49 +95,3 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
 {
 }
 #endif
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-static struct omap_nand_platform_data nand_data;
-
-void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
-				 int nr_parts)
-{
-	u8 cs = 0;
-	u8 nandcs = GPMC_CS_NUM + 1;
-
-	/* find out the chip-select on which NAND exists */
-	while (cs < GPMC_CS_NUM) {
-		u32 ret = 0;
-		ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-
-		if ((ret & 0xC00) == 0x800) {
-			printk(KERN_INFO "Found NAND on CS%d\n", cs);
-			if (nandcs > GPMC_CS_NUM)
-				nandcs = cs;
-		}
-		cs++;
-	}
-
-	if (nandcs > GPMC_CS_NUM) {
-		printk(KERN_INFO "NAND: Unable to find configuration "
-				 "in GPMC\n ");
-		return;
-	}
-
-	if (nandcs < GPMC_CS_NUM) {
-		nand_data.cs = nandcs;
-		nand_data.parts = parts;
-		nand_data.nr_parts = nr_parts;
-		nand_data.devsize = options;
-
-		printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
-		if (gpmc_nand_init(&nand_data) < 0)
-			printk(KERN_ERR "Unable to register NAND device\n");
-	}
-}
-#else
-void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
-				 int nr_parts)
-{
-}
-#endif
diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h
index a0b4a42..72bb41b 100644
--- a/arch/arm/mach-omap2/common-board-devices.h
+++ b/arch/arm/mach-omap2/common-board-devices.h
@@ -10,6 +10,5 @@ struct ads7846_platform_data;
 
 void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
 		       struct ads7846_platform_data *board_pdata);
-void omap_nand_flash_init(int opts, struct mtd_partition *parts, int n_parts);
 
 #endif /* __OMAP_COMMON_BOARD_DEVICES__ */
-- 
1.7.1