From: Thorsten Leemhuis <regressions@leemhuis.info> To: ath10k@lists.infradead.org, Kalle Valo <kvalo@codeaurora.org>, wgong@codeaurora.org Cc: "regressions@lists.linux.dev" <regressions@lists.linux.dev>, Sebastian Bachmann <hello@reox.at> Subject: Re: Compex WLE200NX: regdomain sanitized regression Date: Sat, 27 Nov 2021 12:28:03 +0100 [thread overview] Message-ID: <8efdd311-84c0-6fac-c43d-b981ccc8ec9d@leemhuis.info> (raw) In-Reply-To: <1c160dfb-6ccc-b4d6-76f6-4364e0adb6dd@reox.at> Hi, this is your Linux kernel regression tracker speaking. Thanks for the report. CCing regression mailing list, which should be in the loop for all regressions, as explained here: https://www.kernel.org/doc/html/latest/admin-guide/reporting-issues.html Also adding the ath10k maintainer and the author of the likely culprit of this regressions to the recipients. On 27.11.21 09:17, Sebastian Bachmann wrote: > > I recently upgraded my Debian based AP from buster to bullseye, just to > find out that hostapd does not work any more, because all 5GHz channels > are marked as No-IR. This regression was already discussed on this ML > here: https://www.mail-archive.com/ath10k@lists.infradead.org/msg12018.html > and there is also an entry in Debian's bug tracker for the same issue: > https://bugs.debian.org/959821 TWIMC: To be sure this issue doesn't fall through the cracks unnoticed again, I'm adding it to regzbot, my Linux kernel regression tracking bot: #regzbot ^introduced 2dc016599cfa9672a147528ca26d70c3654a5423 #regzbot title net: wireless: ath10k: 5GHz channels are marked as No-IR #regzbot monitor https://lore.kernel.org/ath10k/5971a327-d11a-35e6-8295-8dfb8ae3a434@yandex.ru/ #regzbot monitor https://lore.kernel.org/linux-wireless/20200730124923.271429-1-alsi@bang-olufsen.dk/ #regzbot monitor https://lore.kernel.org/ath10k/19e636c1-fdbe-7222-a055-d668e4617070@gmx.de/ #regzbot monitor https://lore.kernel.org/ath10k/20201022172113.GA1367233@capeo.gueux.org/ #regzbot link: https://bugs.debian.org/959821 #regzbot link: https://bbs.archlinux.org/viewtopic.php?id=254535 #regzbot link: https://lore.kernel.org/ath10k/CA+ASDXNNfG3-ra8C2ou457J=Vj5eE83VCXgGsFPQQOixTcu7YA@mail.gmail.com/ #regzbot ignore-activity Reminder for developers: when fixing this, please include a 'Link:' tag pointing to the report (the parent of this mail), as explained here: Documentation/process/submitting-patches.rst > I have a slightly different card (branded Compex WLE200NX): > 04:00.0 Network controller: Qualcomm Atheros AR928X Wireless Network > Adapter (PCI-Express) (rev 01) > Subsystem: Qualcomm Atheros AR928X Wireless Network Adapter > (PCI-Express) > Kernel driver in use: ath9k > Kernel modules: ath9k > > But as you can see, also the EEPROM gets sanitized: > [ 15.461755] ath9k 0000:04:00.0: enabling device (0000 -> 0002) > [ 15.911600] ath: EEPROM regdomain sanitized > [ 15.911612] ath: EEPROM regdomain: 0x64 > [ 15.911615] ath: EEPROM indicates we should expect a direct regpair map > [ 15.911625] ath: Country alpha2 being used: 00 > [ 15.911628] ath: Regpair used: 0x64 > > I read in the other thread, that this is a regression, but the actual > commit causing it was never reverted. :-/ > I tried to search for newer messages explaining the issue, however as > far as I can tell, the thread ends in June 2020 with no solution available. > > Therefore, I kindly want to ask if there is any workaround available to > re-enable 5GHz channels in AP mode for my card? (expect sticking to a > pre-5.6 kernel or manually patching and recompiling ath) Ciao, Thorsten, your Linux kernel regression tracker. P.S.: As a Linux kernel regression tracker I'm getting a lot of reports on my table. I can only look briefly into most of them. Unfortunately therefore I sometimes will get things wrong or miss something important. I hope that's not the case here; if you think it is, don't hesitate to tell me about it in a public reply. That's in everyone's interest, as what I wrote above might be misleading to everyone reading this; any suggestion I gave they thus might sent someone reading this down the wrong rabbit hole, which none of us wants. BTW, I have no personal interest in this issue, which is tracked using regzbot, my Linux kernel regression tracking bot (https://linux-regtracking.leemhuis.info/regzbot/). I'm only posting this mail to get things rolling again and hence don't need to be CC on all further activities wrt to this regression. P.P.S.: If you want to know more about regzbot, check out its web-interface, the getting start guide, and/or the references documentation: https://linux-regtracking.leemhuis.info/regzbot/ https://gitlab.com/knurd42/regzbot/-/blob/main/docs/getting_started.md https://gitlab.com/knurd42/regzbot/-/blob/main/docs/reference.md The last two documents will explain how you can interact with regzbot yourself if your want to. Hint for the reporter: when reporting a regression it's in your interest to tell #regzbot about it in the report, as that will ensure the regression gets on the radar of regzbot and the regression tracker. That's in your interest, as they will make sure the report won't fall through the cracks unnoticed. Hint for developers: you normally don't need to care about regzbot, just fix the issue as you normally would. Just remember to include a 'Link:' tag to the report in the commit message, as explained in Documentation/process/submitting-patches.rst That aspect was recently was made more explicit in commit 1f57bd42b77c: https://git.kernel.org/linus/1f57bd42b77c
WARNING: multiple messages have this Message-ID (diff)
From: Thorsten Leemhuis <regressions@leemhuis.info> To: ath10k@lists.infradead.org, Kalle Valo <kvalo@codeaurora.org>, wgong@codeaurora.org Cc: "regressions@lists.linux.dev" <regressions@lists.linux.dev>, Sebastian Bachmann <hello@reox.at> Subject: Re: Compex WLE200NX: regdomain sanitized regression Date: Sat, 27 Nov 2021 12:28:03 +0100 [thread overview] Message-ID: <8efdd311-84c0-6fac-c43d-b981ccc8ec9d@leemhuis.info> (raw) In-Reply-To: <1c160dfb-6ccc-b4d6-76f6-4364e0adb6dd@reox.at> Hi, this is your Linux kernel regression tracker speaking. Thanks for the report. CCing regression mailing list, which should be in the loop for all regressions, as explained here: https://www.kernel.org/doc/html/latest/admin-guide/reporting-issues.html Also adding the ath10k maintainer and the author of the likely culprit of this regressions to the recipients. On 27.11.21 09:17, Sebastian Bachmann wrote: > > I recently upgraded my Debian based AP from buster to bullseye, just to > find out that hostapd does not work any more, because all 5GHz channels > are marked as No-IR. This regression was already discussed on this ML > here: https://www.mail-archive.com/ath10k@lists.infradead.org/msg12018.html > and there is also an entry in Debian's bug tracker for the same issue: > https://bugs.debian.org/959821 TWIMC: To be sure this issue doesn't fall through the cracks unnoticed again, I'm adding it to regzbot, my Linux kernel regression tracking bot: #regzbot ^introduced 2dc016599cfa9672a147528ca26d70c3654a5423 #regzbot title net: wireless: ath10k: 5GHz channels are marked as No-IR #regzbot monitor https://lore.kernel.org/ath10k/5971a327-d11a-35e6-8295-8dfb8ae3a434@yandex.ru/ #regzbot monitor https://lore.kernel.org/linux-wireless/20200730124923.271429-1-alsi@bang-olufsen.dk/ #regzbot monitor https://lore.kernel.org/ath10k/19e636c1-fdbe-7222-a055-d668e4617070@gmx.de/ #regzbot monitor https://lore.kernel.org/ath10k/20201022172113.GA1367233@capeo.gueux.org/ #regzbot link: https://bugs.debian.org/959821 #regzbot link: https://bbs.archlinux.org/viewtopic.php?id=254535 #regzbot link: https://lore.kernel.org/ath10k/CA+ASDXNNfG3-ra8C2ou457J=Vj5eE83VCXgGsFPQQOixTcu7YA@mail.gmail.com/ #regzbot ignore-activity Reminder for developers: when fixing this, please include a 'Link:' tag pointing to the report (the parent of this mail), as explained here: Documentation/process/submitting-patches.rst > I have a slightly different card (branded Compex WLE200NX): > 04:00.0 Network controller: Qualcomm Atheros AR928X Wireless Network > Adapter (PCI-Express) (rev 01) > Subsystem: Qualcomm Atheros AR928X Wireless Network Adapter > (PCI-Express) > Kernel driver in use: ath9k > Kernel modules: ath9k > > But as you can see, also the EEPROM gets sanitized: > [ 15.461755] ath9k 0000:04:00.0: enabling device (0000 -> 0002) > [ 15.911600] ath: EEPROM regdomain sanitized > [ 15.911612] ath: EEPROM regdomain: 0x64 > [ 15.911615] ath: EEPROM indicates we should expect a direct regpair map > [ 15.911625] ath: Country alpha2 being used: 00 > [ 15.911628] ath: Regpair used: 0x64 > > I read in the other thread, that this is a regression, but the actual > commit causing it was never reverted. :-/ > I tried to search for newer messages explaining the issue, however as > far as I can tell, the thread ends in June 2020 with no solution available. > > Therefore, I kindly want to ask if there is any workaround available to > re-enable 5GHz channels in AP mode for my card? (expect sticking to a > pre-5.6 kernel or manually patching and recompiling ath) Ciao, Thorsten, your Linux kernel regression tracker. P.S.: As a Linux kernel regression tracker I'm getting a lot of reports on my table. I can only look briefly into most of them. Unfortunately therefore I sometimes will get things wrong or miss something important. I hope that's not the case here; if you think it is, don't hesitate to tell me about it in a public reply. That's in everyone's interest, as what I wrote above might be misleading to everyone reading this; any suggestion I gave they thus might sent someone reading this down the wrong rabbit hole, which none of us wants. BTW, I have no personal interest in this issue, which is tracked using regzbot, my Linux kernel regression tracking bot (https://linux-regtracking.leemhuis.info/regzbot/). I'm only posting this mail to get things rolling again and hence don't need to be CC on all further activities wrt to this regression. P.P.S.: If you want to know more about regzbot, check out its web-interface, the getting start guide, and/or the references documentation: https://linux-regtracking.leemhuis.info/regzbot/ https://gitlab.com/knurd42/regzbot/-/blob/main/docs/getting_started.md https://gitlab.com/knurd42/regzbot/-/blob/main/docs/reference.md The last two documents will explain how you can interact with regzbot yourself if your want to. Hint for the reporter: when reporting a regression it's in your interest to tell #regzbot about it in the report, as that will ensure the regression gets on the radar of regzbot and the regression tracker. That's in your interest, as they will make sure the report won't fall through the cracks unnoticed. Hint for developers: you normally don't need to care about regzbot, just fix the issue as you normally would. Just remember to include a 'Link:' tag to the report in the commit message, as explained in Documentation/process/submitting-patches.rst That aspect was recently was made more explicit in commit 1f57bd42b77c: https://git.kernel.org/linus/1f57bd42b77c _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2021-11-27 11:28 UTC|newest] Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-11-27 8:17 Compex WLE200NX: regdomain sanitized regression Sebastian Bachmann 2021-11-27 11:28 ` Thorsten Leemhuis [this message] 2021-11-27 11:28 ` Thorsten Leemhuis 2021-11-27 12:21 ` Nuno Oliveira 2021-11-27 13:25 ` Sebastian Bachmann 2021-12-01 9:06 ` Thorsten Leemhuis 2021-12-01 9:06 ` Thorsten Leemhuis 2021-12-06 7:18 ` Sebastian Bachmann 2021-12-20 10:37 ` Kalle Valo 2021-12-20 10:37 ` Kalle Valo 2021-12-20 18:31 ` Nuno Oliveira 2021-12-20 18:31 ` Nuno Oliveira 2022-02-18 11:47 ` Thorsten Leemhuis 2022-02-18 11:47 ` Thorsten Leemhuis 2022-02-24 16:22 ` Kalle Valo 2022-02-24 16:22 ` Kalle Valo 2022-02-24 16:38 ` Thorsten Leemhuis 2022-02-24 16:38 ` Thorsten Leemhuis 2022-02-24 16:47 ` Kalle Valo 2022-02-24 16:47 ` Kalle Valo 2021-11-27 16:35 ` Bryce Allen
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=8efdd311-84c0-6fac-c43d-b981ccc8ec9d@leemhuis.info \ --to=regressions@leemhuis.info \ --cc=ath10k@lists.infradead.org \ --cc=hello@reox.at \ --cc=kvalo@codeaurora.org \ --cc=regressions@lists.linux.dev \ --cc=wgong@codeaurora.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.