[U-Boot] build uboot.rom for minnow

[U-Boot] build uboot.rom for minnow

[Hariharan A]

Hi,
        I have followed steps in the readme.x86 to build Uboot.rom for minnowboard. but i got a error message as:
 CHK     include/config/uboot.release
  CHK     include/generated/version_autogenerated.h
  CHK     include/generated/timestamp_autogenerated.h
  UPD     include/generated/timestamp_autogenerated.h
  CHK     include/generated/generic-asm-offsets.h
  CHK     include/generated/asm-offsets.h
  HOSTCC  tools/mkenvimage.o
  HOSTLD  tools/mkenvimage
  HOSTCC  tools/fit_image.o
  HOSTCC  tools/image-host.o
  HOSTCC  tools/dumpimage.o
  HOSTLD  tools/dumpimage
  HOSTCC  tools/mkimage.o
  HOSTLD  tools/mkimage
  HOSTLD  tools/fit_info
  HOSTLD  tools/fit_check_sign
  CC      cmd/version.o
  LD      cmd/built-in.o
  CC      common/main.o
  CC      common/board_f.o
  LD      common/built-in.o
  CC      lib/efi_loader/helloworld.o
  LD      lib/efi_loader/helloworld.so
  OBJCOPY lib/efi_loader/helloworld.efi
  CC      lib/smbios.o
  CC      lib/display_options.o
  LD      lib/built-in.o
  LD      u-boot
  OBJCOPY u-boot.srec
  OBJCOPY u-boot-nodtb.bin
  CAT     u-boot-dtb.bin
  COPY    u-boot.bin
  SYM     u-boot.sym
  OBJCOPY u-boot-x86-16bit.bin
  BINMAN  u-boot.rom
fdtput: invalid option -- 'd'
Usage: write a property value to a device tree
    fdtput <options> <dt file> <node> <property> [<value>...]
    fdtput -c <options> <dt file> [<node>...]

The command line arguments are joined together into a single value.
<type>    s=string, i=int, u=unsigned, x=hex
    Optional modifier prefix:
        hh or b=byte, h=2 byte, l=4 byte (default)

Options: -[cpt:vhV]
  -c, --create     Create nodes if they don't already exist
  -p, --auto-path  Automatically create nodes as needed for the node path
  -t, --type <arg> Type of data
  -v, --verbose    Display each value decoded from command line
  -h, --help       Print this help and exit
  -V, --version    Print version and exit

Error: unknown option
binman: Error running 'fdtput ./u-boot-dtb-with-ucode.dtb -d /microcode/update at 0 data'
make: *** [u-boot.rom] Error 1


Please do help.

________________________________

SASKEN BUSINESS DISCLAIMER: This message may contain confidential, proprietary or legally privileged information. In case you are not the original intended Recipient of the message, you must not, directly or indirectly, use, disclose, distribute, print, or copy any part of this message and you are requested to delete it and inform the sender. Any views expressed in this message are those of the individual sender unless otherwise stated. Nothing contained in this message shall be construed as an offer or acceptance of any offer by Sasken Technologies Limited ( formerly known as "Sasken Communication Technologies Limited" ) unless sent with that express intent and with due authority of Sasken. Sasken has taken enough precautions to prevent the spread of viruses. However the company accepts no liability for any damage caused by any virus transmitted by this email.
Read Disclaimer at http://www.sasken.com/mail-disclaimer/

________________________________