* Error building meta-ide-support; 'SNDCTL_DSP_MAPINBUF' undeclared here
@ 2013-08-13 16:24 Bryan Evenson
2013-08-15 20:54 ` Zhang, Jessica
0 siblings, 1 reply; 6+ messages in thread
From: Bryan Evenson @ 2013-08-13 16:24 UTC (permalink / raw)
To: yocto
I am working on installing and setting up the Eclipse IDE plug-in for Eclipse Juno. I am using poky/dylan (at the yocto-1.4.1 tag) for my build environment. I am to the "Configuring the Cross-Compiler Options" section from the current Yocto Project mega-manual, and after setting up the Toolchain Root Location and the Sysroot Location, I get the error 'Specified toolchain directory does not contain a toolchain generated with "bitbake meta-ide-support"'. So, I went back and did "bitbake meta-ide-support" as requested and I am getting the following errors:
DEBUG: Executing shell function do_compile
NOTE: make -j 2
CC arm-linux-user/linux-user/syscall.o
In file included from /media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-r0/qemu-1.4.0/linux-user/syscall.c:3705:0:
/media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-r0/qemu-1.4.0/linux-user/ioctls.h:189:1: error: 'SNDCTL_DSP_MAPINBUF' undeclared here (not in a function)
/media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-r0/qemu-1.4.0/linux-user/ioctls.h:190:1: error: 'SNDCTL_DSP_MAPOUTBUF' undeclared here (not in a function)
/media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-r0/qemu-1.4.0/linux-user/ioctls.h:245:1: error: 'SOUND_MIXER_ACCESS' undeclared here (not in a function)
make[1]: *** [linux-user/syscall.o] Error 1
make: *** [subdir-arm-linux-user] Error 2
make: *** Waiting for unfinished jobs....
ERROR: oe_runmake failed
ERROR: Function failed: do_compile (see /media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-r0/temp/log.do_compile.20276 for further information)
I did a search and I cannot find these defines anywhere in the i686 sysroot directory, but it exists in my target's sysroot directory. Is there something wrong with the i686 sysroot setup on my system? If it matters, I'm doing the build machine is running Ubuntu 12.04.2 LTS.
Thanks,
Bryan
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Error building meta-ide-support; 'SNDCTL_DSP_MAPINBUF' undeclared here
2013-08-13 16:24 Error building meta-ide-support; 'SNDCTL_DSP_MAPINBUF' undeclared here Bryan Evenson
@ 2013-08-15 20:54 ` Zhang, Jessica
2013-08-15 21:12 ` Bryan Evenson
0 siblings, 1 reply; 6+ messages in thread
From: Zhang, Jessica @ 2013-08-15 20:54 UTC (permalink / raw)
To: Bryan Evenson, yocto
[-- Attachment #1: Type: text/plain, Size: 2576 bytes --]
Hi Bryan,
When you tried to setup your eclipse plugin, what is your toolchain and what
is your sysroot. Are they built by you or you download them?
- Jessica
-----Original Message-----
From: yocto-bounces@yoctoproject.org [mailto:yocto-bounces@yoctoproject.org]
On Behalf Of Bryan Evenson
Sent: Tuesday, August 13, 2013 9:25 AM
To: yocto@yoctoproject.org
Subject: [yocto] Error building meta-ide-support; 'SNDCTL_DSP_MAPINBUF'
undeclared here
I am working on installing and setting up the Eclipse IDE plug-in for
Eclipse Juno. I am using poky/dylan (at the yocto-1.4.1 tag) for my build
environment. I am to the "Configuring the Cross-Compiler Options" section
from the current Yocto Project mega-manual, and after setting up the
Toolchain Root Location and the Sysroot Location, I get the error 'Specified
toolchain directory does not contain a toolchain generated with "bitbake
meta-ide-support"'. So, I went back and did "bitbake meta-ide-support" as
requested and I am getting the following errors:
DEBUG: Executing shell function do_compile
NOTE: make -j 2
CC arm-linux-user/linux-user/syscall.o
In file included from
/media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-r0/qemu-1.
4.0/linux-user/syscall.c:3705:0:
/media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-r0/qemu-1.
4.0/linux-user/ioctls.h:189:1: error: 'SNDCTL_DSP_MAPINBUF' undeclared here
(not in a function)
/media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-r0/qemu-1.
4.0/linux-user/ioctls.h:190:1: error: 'SNDCTL_DSP_MAPOUTBUF' undeclared here
(not in a function)
/media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-r0/qemu-1.
4.0/linux-user/ioctls.h:245:1: error: 'SOUND_MIXER_ACCESS' undeclared here
(not in a function)
make[1]: *** [linux-user/syscall.o] Error 1
make: *** [subdir-arm-linux-user] Error 2
make: *** Waiting for unfinished jobs....
ERROR: oe_runmake failed
ERROR: Function failed: do_compile (see
/media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-r0/temp/lo
g.do_compile.20276 for further information)
I did a search and I cannot find these defines anywhere in the i686 sysroot
directory, but it exists in my target's sysroot directory. Is there
something wrong with the i686 sysroot setup on my system? If it matters,
I'm doing the build machine is running Ubuntu 12.04.2 LTS.
Thanks,
Bryan
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto
[-- Attachment #2: smime.p7s --]
[-- Type: application/pkcs7-signature, Size: 9626 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Error building meta-ide-support; 'SNDCTL_DSP_MAPINBUF' undeclared here
2013-08-15 20:54 ` Zhang, Jessica
@ 2013-08-15 21:12 ` Bryan Evenson
2013-08-15 21:19 ` Zhang, Jessica
0 siblings, 1 reply; 6+ messages in thread
From: Bryan Evenson @ 2013-08-15 21:12 UTC (permalink / raw)
To: Zhang, Jessica, yocto
> -----Original Message-----
> From: Zhang, Jessica [mailto:jessica.zhang@intel.com]
> Sent: Thursday, August 15, 2013 4:55 PM
> To: Bryan Evenson; yocto@yoctoproject.org
> Subject: RE: [yocto] Error building meta-ide-support;
> 'SNDCTL_DSP_MAPINBUF' undeclared here
>
> Hi Bryan,
>
> When you tried to setup your eclipse plugin, what is your toolchain and
> what
> is your sysroot. Are they built by you or you download them?
>
I built my own. I'm using the meta-atmel layer located at https://github.com/evensonbryan/meta-atmel.git, using the instructions shown in the README to download and build. Only exception is that I have MACHINE set as "at91sam9x5ek" in local.conf. I did "bitbake core-image-minimal" as the initial build to start off everything; never tried to bitbake meta-ide-support on this system.
-Bryan
> - Jessica
>
> -----Original Message-----
> From: yocto-bounces@yoctoproject.org [mailto:yocto-
> bounces@yoctoproject.org]
> On Behalf Of Bryan Evenson
> Sent: Tuesday, August 13, 2013 9:25 AM
> To: yocto@yoctoproject.org
> Subject: [yocto] Error building meta-ide-support; 'SNDCTL_DSP_MAPINBUF'
> undeclared here
>
> I am working on installing and setting up the Eclipse IDE plug-in for
> Eclipse Juno. I am using poky/dylan (at the yocto-1.4.1 tag) for my
> build
> environment. I am to the "Configuring the Cross-Compiler Options"
> section
> from the current Yocto Project mega-manual, and after setting up the
> Toolchain Root Location and the Sysroot Location, I get the error
> 'Specified
> toolchain directory does not contain a toolchain generated with
> "bitbake
> meta-ide-support"'. So, I went back and did "bitbake meta-ide-support"
> as
> requested and I am getting the following errors:
>
> DEBUG: Executing shell function do_compile
> NOTE: make -j 2
> CC arm-linux-user/linux-user/syscall.o
> In file included from
> /media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-
> r0/qemu-1.
> 4.0/linux-user/syscall.c:3705:0:
> /media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-
> r0/qemu-1.
> 4.0/linux-user/ioctls.h:189:1: error: 'SNDCTL_DSP_MAPINBUF' undeclared
> here
> (not in a function)
> /media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-
> r0/qemu-1.
> 4.0/linux-user/ioctls.h:190:1: error: 'SNDCTL_DSP_MAPOUTBUF' undeclared
> here
> (not in a function)
> /media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-
> r0/qemu-1.
> 4.0/linux-user/ioctls.h:245:1: error: 'SOUND_MIXER_ACCESS' undeclared
> here
> (not in a function)
> make[1]: *** [linux-user/syscall.o] Error 1
> make: *** [subdir-arm-linux-user] Error 2
> make: *** Waiting for unfinished jobs....
> ERROR: oe_runmake failed
> ERROR: Function failed: do_compile (see
> /media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-
> r0/temp/lo
> g.do_compile.20276 for further information)
>
> I did a search and I cannot find these defines anywhere in the i686
> sysroot
> directory, but it exists in my target's sysroot directory. Is there
> something wrong with the i686 sysroot setup on my system? If it
> matters,
> I'm doing the build machine is running Ubuntu 12.04.2 LTS.
>
> Thanks,
> Bryan
>
>
>
>
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Error building meta-ide-support; 'SNDCTL_DSP_MAPINBUF' undeclared here
2013-08-15 21:12 ` Bryan Evenson
@ 2013-08-15 21:19 ` Zhang, Jessica
2013-08-19 13:54 ` Bryan Evenson
0 siblings, 1 reply; 6+ messages in thread
From: Zhang, Jessica @ 2013-08-15 21:19 UTC (permalink / raw)
To: Bryan Evenson, yocto
[-- Attachment #1: Type: text/plain, Size: 4278 bytes --]
Ok, 1st of all just build core-image-minimal won't give you libraries that
you'll need to do cross development. The simplest way to build a cross
toolchain and sysroot that match your target image is to do "bitbake
core-image-mininal -c populate_sdk". That'll generate a SDK tarball for
you. You can follow the developer's manual on how to extract the tarball,
then in eclipse your toolchain location should be the directory you extract
the tarball at, and sysroot should be the sysroot directory underneath where
you extracted your tar ball.
- Jessica
-----Original Message-----
From: Bryan Evenson [mailto:bevenson@melinkcorp.com]
Sent: Thursday, August 15, 2013 2:12 PM
To: Zhang, Jessica; yocto@yoctoproject.org
Subject: RE: [yocto] Error building meta-ide-support; 'SNDCTL_DSP_MAPINBUF'
undeclared here
> -----Original Message-----
> From: Zhang, Jessica [mailto:jessica.zhang@intel.com]
> Sent: Thursday, August 15, 2013 4:55 PM
> To: Bryan Evenson; yocto@yoctoproject.org
> Subject: RE: [yocto] Error building meta-ide-support;
> 'SNDCTL_DSP_MAPINBUF' undeclared here
>
> Hi Bryan,
>
> When you tried to setup your eclipse plugin, what is your toolchain
> and what is your sysroot. Are they built by you or you download them?
>
I built my own. I'm using the meta-atmel layer located at
https://github.com/evensonbryan/meta-atmel.git, using the instructions shown
in the README to download and build. Only exception is that I have MACHINE
set as "at91sam9x5ek" in local.conf. I did "bitbake core-image-minimal" as
the initial build to start off everything; never tried to bitbake
meta-ide-support on this system.
-Bryan
> - Jessica
>
> -----Original Message-----
> From: yocto-bounces@yoctoproject.org [mailto:yocto-
> bounces@yoctoproject.org]
> On Behalf Of Bryan Evenson
> Sent: Tuesday, August 13, 2013 9:25 AM
> To: yocto@yoctoproject.org
> Subject: [yocto] Error building meta-ide-support; 'SNDCTL_DSP_MAPINBUF'
> undeclared here
>
> I am working on installing and setting up the Eclipse IDE plug-in for
> Eclipse Juno. I am using poky/dylan (at the yocto-1.4.1 tag) for my
> build
> environment. I am to the "Configuring the Cross-Compiler Options"
> section
> from the current Yocto Project mega-manual, and after setting up the
> Toolchain Root Location and the Sysroot Location, I get the error
> 'Specified
> toolchain directory does not contain a toolchain generated with
> "bitbake
> meta-ide-support"'. So, I went back and did "bitbake meta-ide-support"
> as
> requested and I am getting the following errors:
>
> DEBUG: Executing shell function do_compile
> NOTE: make -j 2
> CC arm-linux-user/linux-user/syscall.o
> In file included from
> /media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-
> r0/qemu-1.
> 4.0/linux-user/syscall.c:3705:0:
> /media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-
> r0/qemu-1.
> 4.0/linux-user/ioctls.h:189:1: error: 'SNDCTL_DSP_MAPINBUF' undeclared
> here
> (not in a function)
> /media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-
> r0/qemu-1.
> 4.0/linux-user/ioctls.h:190:1: error: 'SNDCTL_DSP_MAPOUTBUF' undeclared
> here
> (not in a function)
> /media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-
> r0/qemu-1.
> 4.0/linux-user/ioctls.h:245:1: error: 'SOUND_MIXER_ACCESS' undeclared
> here
> (not in a function)
> make[1]: *** [linux-user/syscall.o] Error 1
> make: *** [subdir-arm-linux-user] Error 2
> make: *** Waiting for unfinished jobs....
> ERROR: oe_runmake failed
> ERROR: Function failed: do_compile (see
> /media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-
> r0/temp/lo
> g.do_compile.20276 for further information)
>
> I did a search and I cannot find these defines anywhere in the i686
> sysroot
> directory, but it exists in my target's sysroot directory. Is there
> something wrong with the i686 sysroot setup on my system? If it
> matters,
> I'm doing the build machine is running Ubuntu 12.04.2 LTS.
>
> Thanks,
> Bryan
>
>
>
>
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
[-- Attachment #2: smime.p7s --]
[-- Type: application/pkcs7-signature, Size: 9626 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Error building meta-ide-support; 'SNDCTL_DSP_MAPINBUF' undeclared here
2013-08-15 21:19 ` Zhang, Jessica
@ 2013-08-19 13:54 ` Bryan Evenson
2013-08-20 23:51 ` Zhang, Jessica
0 siblings, 1 reply; 6+ messages in thread
From: Bryan Evenson @ 2013-08-19 13:54 UTC (permalink / raw)
To: Zhang, Jessica, yocto
Jessica,
> -----Original Message-----
> From: Zhang, Jessica [mailto:jessica.zhang@intel.com]
> Sent: Thursday, August 15, 2013 5:19 PM
> To: Bryan Evenson; yocto@yoctoproject.org
> Subject: RE: [yocto] Error building meta-ide-support;
> 'SNDCTL_DSP_MAPINBUF' undeclared here
>
> Ok, 1st of all just build core-image-minimal won't give you libraries
> that
> you'll need to do cross development. The simplest way to build a cross
> toolchain and sysroot that match your target image is to do "bitbake
> core-image-mininal -c populate_sdk". That'll generate a SDK tarball
> for
> you.
For some reason on my setup, the command format "bitbake <recipe-name> -c <task>" never seems to work. For example, running "bitbake core-image-minimal -c populate_sdk" produces the error "nothing PROVIDES 'populate_sdk'". But, issuing "bitbake -c populate_sdk core-image-minimal" did build the SDK tarball.
And for my setup, I configured the Yocto ADT preferences as follows:
- Standalone pre-built toolchain
- Toolchain Root Location: <SDK tarball extract location>/opt/poky/1.4.1
- Sysroot Location: <SDK tarball extract location>/opt/poky/1.4.1/sysroots
After these selections were made, then "arm926ejste-poky-linux-gnueabi" showed up as a Target Architecture option. I saved these settings and created a simple project using the steps shown in the ADT manual. After some minor modifications to configure.ac and Makefile.am for my source files, I was able to cross-compile a project for my system.
And just to confirm, what files in the project are needed for someone else to build my project (assuming their toolchain is setup properly)? Aside from my source and header files, I know I need configure.ac, autogen.sh, and Makefile.am from each directory. And I also need .project and the .settings directory for the Eclipse project setup. Anything else that I am missing?
Thanks,
Bryan
> You can follow the developer's manual on how to extract the
> tarball,
> then in eclipse your toolchain location should be the directory you
> extract
> the tarball at, and sysroot should be the sysroot directory underneath
> where
> you extracted your tar ball.
>
> - Jessica
>
> -----Original Message-----
> From: Bryan Evenson [mailto:bevenson@melinkcorp.com]
> Sent: Thursday, August 15, 2013 2:12 PM
> To: Zhang, Jessica; yocto@yoctoproject.org
> Subject: RE: [yocto] Error building meta-ide-support;
> 'SNDCTL_DSP_MAPINBUF'
> undeclared here
>
>
>
> > -----Original Message-----
> > From: Zhang, Jessica [mailto:jessica.zhang@intel.com]
> > Sent: Thursday, August 15, 2013 4:55 PM
> > To: Bryan Evenson; yocto@yoctoproject.org
> > Subject: RE: [yocto] Error building meta-ide-support;
> > 'SNDCTL_DSP_MAPINBUF' undeclared here
> >
> > Hi Bryan,
> >
> > When you tried to setup your eclipse plugin, what is your toolchain
> > and what is your sysroot. Are they built by you or you download
> them?
> >
>
> I built my own. I'm using the meta-atmel layer located at
> https://github.com/evensonbryan/meta-atmel.git, using the instructions
> shown
> in the README to download and build. Only exception is that I have
> MACHINE
> set as "at91sam9x5ek" in local.conf. I did "bitbake core-image-
> minimal" as
> the initial build to start off everything; never tried to bitbake
> meta-ide-support on this system.
>
> -Bryan
>
> > - Jessica
> >
> > -----Original Message-----
> > From: yocto-bounces@yoctoproject.org [mailto:yocto-
> > bounces@yoctoproject.org]
> > On Behalf Of Bryan Evenson
> > Sent: Tuesday, August 13, 2013 9:25 AM
> > To: yocto@yoctoproject.org
> > Subject: [yocto] Error building meta-ide-support;
> 'SNDCTL_DSP_MAPINBUF'
> > undeclared here
> >
> > I am working on installing and setting up the Eclipse IDE plug-in for
> > Eclipse Juno. I am using poky/dylan (at the yocto-1.4.1 tag) for my
> > build
> > environment. I am to the "Configuring the Cross-Compiler Options"
> > section
> > from the current Yocto Project mega-manual, and after setting up the
> > Toolchain Root Location and the Sysroot Location, I get the error
> > 'Specified
> > toolchain directory does not contain a toolchain generated with
> > "bitbake
> > meta-ide-support"'. So, I went back and did "bitbake meta-ide-
> support"
> > as
> > requested and I am getting the following errors:
> >
> > DEBUG: Executing shell function do_compile
> > NOTE: make -j 2
> > CC arm-linux-user/linux-user/syscall.o
> > In file included from
> > /media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-
> > r0/qemu-1.
> > 4.0/linux-user/syscall.c:3705:0:
> > /media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-
> > r0/qemu-1.
> > 4.0/linux-user/ioctls.h:189:1: error: 'SNDCTL_DSP_MAPINBUF'
> undeclared
> > here
> > (not in a function)
> > /media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-
> > r0/qemu-1.
> > 4.0/linux-user/ioctls.h:190:1: error: 'SNDCTL_DSP_MAPOUTBUF'
> undeclared
> > here
> > (not in a function)
> > /media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-
> > r0/qemu-1.
> > 4.0/linux-user/ioctls.h:245:1: error: 'SOUND_MIXER_ACCESS' undeclared
> > here
> > (not in a function)
> > make[1]: *** [linux-user/syscall.o] Error 1
> > make: *** [subdir-arm-linux-user] Error 2
> > make: *** Waiting for unfinished jobs....
> > ERROR: oe_runmake failed
> > ERROR: Function failed: do_compile (see
> > /media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-
> > r0/temp/lo
> > g.do_compile.20276 for further information)
> >
> > I did a search and I cannot find these defines anywhere in the i686
> > sysroot
> > directory, but it exists in my target's sysroot directory. Is there
> > something wrong with the i686 sysroot setup on my system? If it
> > matters,
> > I'm doing the build machine is running Ubuntu 12.04.2 LTS.
> >
> > Thanks,
> > Bryan
> >
> >
> >
> >
> > _______________________________________________
> > yocto mailing list
> > yocto@yoctoproject.org
> > https://lists.yoctoproject.org/listinfo/yocto
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Error building meta-ide-support; 'SNDCTL_DSP_MAPINBUF' undeclared here
2013-08-19 13:54 ` Bryan Evenson
@ 2013-08-20 23:51 ` Zhang, Jessica
0 siblings, 0 replies; 6+ messages in thread
From: Zhang, Jessica @ 2013-08-20 23:51 UTC (permalink / raw)
To: Bryan Evenson, yocto
[-- Attachment #1: Type: text/plain, Size: 6628 bytes --]
Hi Bryan,
Probably the simplest way is to archive your whole project directory and for
other user, they can import them to workspace, then do reconfigure and
rebuild based on their cross toolchain setup.
Jessica
-----Original Message-----
From: Bryan Evenson [mailto:bevenson@melinkcorp.com]
Sent: Monday, August 19, 2013 6:54 AM
To: Zhang, Jessica; yocto@yoctoproject.org
Subject: RE: [yocto] Error building meta-ide-support; 'SNDCTL_DSP_MAPINBUF'
undeclared here
Jessica,
> -----Original Message-----
> From: Zhang, Jessica [mailto:jessica.zhang@intel.com]
> Sent: Thursday, August 15, 2013 5:19 PM
> To: Bryan Evenson; yocto@yoctoproject.org
> Subject: RE: [yocto] Error building meta-ide-support;
> 'SNDCTL_DSP_MAPINBUF' undeclared here
>
> Ok, 1st of all just build core-image-minimal won't give you libraries
> that you'll need to do cross development. The simplest way to build a
> cross toolchain and sysroot that match your target image is to do
> "bitbake core-image-mininal -c populate_sdk". That'll generate a SDK
> tarball for you.
For some reason on my setup, the command format "bitbake <recipe-name> -c
<task>" never seems to work. For example, running "bitbake
core-image-minimal -c populate_sdk" produces the error "nothing PROVIDES
'populate_sdk'". But, issuing "bitbake -c populate_sdk core-image-minimal"
did build the SDK tarball.
And for my setup, I configured the Yocto ADT preferences as follows:
- Standalone pre-built toolchain
- Toolchain Root Location: <SDK tarball extract location>/opt/poky/1.4.1
- Sysroot Location: <SDK tarball extract location>/opt/poky/1.4.1/sysroots
After these selections were made, then "arm926ejste-poky-linux-gnueabi"
showed up as a Target Architecture option. I saved these settings and
created a simple project using the steps shown in the ADT manual. After
some minor modifications to configure.ac and Makefile.am for my source
files, I was able to cross-compile a project for my system.
And just to confirm, what files in the project are needed for someone else
to build my project (assuming their toolchain is setup properly)? Aside
from my source and header files, I know I need configure.ac, autogen.sh, and
Makefile.am from each directory. And I also need .project and the .settings
directory for the Eclipse project setup. Anything else that I am missing?
Thanks,
Bryan
> You can follow the developer's manual on how to extract the tarball,
> then in eclipse your toolchain location should be the directory you
> extract the tarball at, and sysroot should be the sysroot directory
> underneath where you extracted your tar ball.
>
> - Jessica
>
> -----Original Message-----
> From: Bryan Evenson [mailto:bevenson@melinkcorp.com]
> Sent: Thursday, August 15, 2013 2:12 PM
> To: Zhang, Jessica; yocto@yoctoproject.org
> Subject: RE: [yocto] Error building meta-ide-support;
> 'SNDCTL_DSP_MAPINBUF'
> undeclared here
>
>
>
> > -----Original Message-----
> > From: Zhang, Jessica [mailto:jessica.zhang@intel.com]
> > Sent: Thursday, August 15, 2013 4:55 PM
> > To: Bryan Evenson; yocto@yoctoproject.org
> > Subject: RE: [yocto] Error building meta-ide-support;
> > 'SNDCTL_DSP_MAPINBUF' undeclared here
> >
> > Hi Bryan,
> >
> > When you tried to setup your eclipse plugin, what is your toolchain
> > and what is your sysroot. Are they built by you or you download
> them?
> >
>
> I built my own. I'm using the meta-atmel layer located at
> https://github.com/evensonbryan/meta-atmel.git, using the instructions
> shown in the README to download and build. Only exception is that I
> have MACHINE set as "at91sam9x5ek" in local.conf. I did "bitbake
> core-image- minimal" as the initial build to start off everything;
> never tried to bitbake meta-ide-support on this system.
>
> -Bryan
>
> > - Jessica
> >
> > -----Original Message-----
> > From: yocto-bounces@yoctoproject.org [mailto:yocto-
> > bounces@yoctoproject.org] On Behalf Of Bryan Evenson
> > Sent: Tuesday, August 13, 2013 9:25 AM
> > To: yocto@yoctoproject.org
> > Subject: [yocto] Error building meta-ide-support;
> 'SNDCTL_DSP_MAPINBUF'
> > undeclared here
> >
> > I am working on installing and setting up the Eclipse IDE plug-in
> > for Eclipse Juno. I am using poky/dylan (at the yocto-1.4.1 tag)
> > for my build environment. I am to the "Configuring the
> > Cross-Compiler Options"
> > section
> > from the current Yocto Project mega-manual, and after setting up the
> > Toolchain Root Location and the Sysroot Location, I get the error
> > 'Specified toolchain directory does not contain a toolchain
> > generated with "bitbake meta-ide-support"'. So, I went back and did
> > "bitbake meta-ide-
> support"
> > as
> > requested and I am getting the following errors:
> >
> > DEBUG: Executing shell function do_compile
> > NOTE: make -j 2
> > CC arm-linux-user/linux-user/syscall.o
> > In file included from
> > /media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-
> > r0/qemu-1.
> > 4.0/linux-user/syscall.c:3705:0:
> > /media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-
> > r0/qemu-1.
> > 4.0/linux-user/ioctls.h:189:1: error: 'SNDCTL_DSP_MAPINBUF'
> undeclared
> > here
> > (not in a function)
> > /media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-
> > r0/qemu-1.
> > 4.0/linux-user/ioctls.h:190:1: error: 'SNDCTL_DSP_MAPOUTBUF'
> undeclared
> > here
> > (not in a function)
> > /media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-
> > r0/qemu-1.
> > 4.0/linux-user/ioctls.h:245:1: error: 'SOUND_MIXER_ACCESS'
> > undeclared here (not in a function)
> > make[1]: *** [linux-user/syscall.o] Error 1
> > make: *** [subdir-arm-linux-user] Error 2
> > make: *** Waiting for unfinished jobs....
> > ERROR: oe_runmake failed
> > ERROR: Function failed: do_compile (see
> > /media/sda3/poky/poky-build/tmp/work/i686-linux/qemu-native/1.4.0-
> > r0/temp/lo
> > g.do_compile.20276 for further information)
> >
> > I did a search and I cannot find these defines anywhere in the i686
> > sysroot directory, but it exists in my target's sysroot directory.
> > Is there something wrong with the i686 sysroot setup on my system?
> > If it matters, I'm doing the build machine is running Ubuntu 12.04.2
> > LTS.
> >
> > Thanks,
> > Bryan
> >
> >
> >
> >
> > _______________________________________________
> > yocto mailing list
> > yocto@yoctoproject.org
> > https://lists.yoctoproject.org/listinfo/yocto
[-- Attachment #2: smime.p7s --]
[-- Type: application/pkcs7-signature, Size: 9626 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-08-20 23:51 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-08-13 16:24 Error building meta-ide-support; 'SNDCTL_DSP_MAPINBUF' undeclared here Bryan Evenson
2013-08-15 20:54 ` Zhang, Jessica
2013-08-15 21:12 ` Bryan Evenson
2013-08-15 21:19 ` Zhang, Jessica
2013-08-19 13:54 ` Bryan Evenson
2013-08-20 23:51 ` Zhang, Jessica
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.