All of lore.kernel.org
 help / color / mirror / Atom feed
* `ucsi_acpi: probe of USBC000:00 failed with error -12` on Dell XPS 13 9370
@ 2018-05-15 14:34 Paul Menzel
  2018-05-15 16:00 ` Greg KH
  0 siblings, 1 reply; 19+ messages in thread
From: Paul Menzel @ 2018-05-15 14:34 UTC (permalink / raw)
  To: Heikki Krogerus; +Cc: linux-usb, linux-kernel, Mario Limonciello


[-- Attachment #1.1: Type: text/plain, Size: 729 bytes --]

Dear Linux folks,


Linux 4.17-rc5 shows the error below on the Dell XPS 13 9370 with Debian 
Sid/unstable.

```
[…]
[    0.440240] usb: port power management may be unreliable
[    0.441358] usbcore: registered new interface driver usb-storage
[    0.441367] usbcore: registered new interface driver usbserial_generic
[    0.441369] usbserial: USB Serial support registered for generic
[    0.441383] ioremap error for 0x3f799000-0x3f79a000, requested 0x2, 
got 0x0
[    0.441518] ucsi_acpi: probe of USBC000:00 failed with error -12
[…]
```

1.  Are the ioremap and ucsi_acpi error related or is a separate report 
needed?
2.  Do you know the reason for the ucsi_acpi error?


Kind regards,

Paul

[-- Attachment #1.2: 20180515–linux_4.17-rc5–dmesg.txt --]
[-- Type: text/plain, Size: 56627 bytes --]

[    0.000000] Linux version 4.17.0-rc5-00009-g1150fc87af6f (root@eed5a4f78c51) (gcc version 7.3.0 (Debian 7.3.0-19)) #2 SMP Tue May 15 12:47:39 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.17.0-rc5-00009-g1150fc87af6f root=UUID=b8b2f3b6-8c20-4c2a-8895-aa2768866674 ro quiet noisapnp cryptomgr.notests mem_sleep_default=deep
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000002d6f7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000002d6f8000-0x000000002d6f8fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000002d6f9000-0x000000002d6f9fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000002d6fa000-0x000000003ecf4fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003ecf5000-0x000000003f0b2fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003f0b3000-0x000000003f0fffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003f100000-0x000000003f7b7fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003f7b8000-0x000000003ff26fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003ff27000-0x000000003fffefff] type 20
[    0.000000] BIOS-e820: [mem 0x000000003ffff000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x0000000047ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000048000000-0x0000000048dfffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000048e00000-0x000000004f7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004ae7fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by American Megatrends
[    0.000000] efi:  ACPI=0x3f0c3000  ACPI 2.0=0x3f0c3000  SMBIOS=0xf0000  SMBIOS 3.0=0xf0020  ESRT=0x3fdd9018  MEMATTR=0x3c2bb018 
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: Dell Inc. XPS 13 9370/0F6P3V, BIOS 1.2.1 02/21/2018
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x4ae800 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask 7F80000000 uncachable
[    0.000000]   1 base 0060000000 mask 7FE0000000 uncachable
[    0.000000]   2 base 0050000000 mask 7FF0000000 uncachable
[    0.000000]   3 base 004C000000 mask 7FFC000000 uncachable
[    0.000000]   4 base 004B000000 mask 7FFF000000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0x48e00 max_arch_pfn = 0x400000000
[    0.000000] esrt: Reserving ESRT space from 0x000000003fdd9018 to 0x000000003fdd9050.
[    0.000000] Base memory trampoline at [        (ptrval)] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x147a03000, 0x147a03fff] PGTABLE
[    0.000000] BRK [0x147a04000, 0x147a04fff] PGTABLE
[    0.000000] BRK [0x147a05000, 0x147a05fff] PGTABLE
[    0.000000] BRK [0x147a06000, 0x147a06fff] PGTABLE
[    0.000000] BRK [0x147a07000, 0x147a07fff] PGTABLE
[    0.000000] BRK [0x147a08000, 0x147a08fff] PGTABLE
[    0.000000] BRK [0x147a09000, 0x147a09fff] PGTABLE
[    0.000000] BRK [0x147a0a000, 0x147a0afff] PGTABLE
[    0.000000] BRK [0x147a0b000, 0x147a0bfff] PGTABLE
[    0.000000] Secure boot could not be determined
[    0.000000] RAMDISK: [mem 0x37349000-0x3799bfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000003F0C3000 000024 (v02 DELL  )
[    0.000000] ACPI: XSDT 0x000000003F0C30B8 0000F4 (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000003F0E9860 00010C (v05 DELL   CBX3     01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000003F0C3240 02661B (v02 DELL   CBX3     01072009 INTL 20160422)
[    0.000000] ACPI: FACS 0x000000003F7B5180 000040
[    0.000000] ACPI: APIC 0x000000003F0E9970 0000BC (v03 DELL   CBX3     01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x000000003F0E9A30 000044 (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x000000003F0E9A78 0000AC (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x000000003F0E9B28 00003C (v01 DELL   CBX3     01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x000000003F0E9B68 000038 (v01 DELL   CBX3     01072009 AMI. 0005000B)
[    0.000000] ACPI: SSDT 0x000000003F0E9BA0 000359 (v01 SataRe SataTabl 00001000 INTL 20160422)
[    0.000000] ACPI: BOOT 0x000000003F0E9F00 000028 (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x000000003F0E9F28 0012DE (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
[    0.000000] ACPI: HPET 0x000000003F0EB208 000038 (v01 INTEL  KBL-ULT  00000001 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x000000003F0EB240 000CEF (v02 INTEL  xh_rvp07 00000000 INTL 20160422)
[    0.000000] ACPI: UEFI 0x000000003F0EBF30 000042 (v01                 00000000      00000000)
[    0.000000] ACPI: SSDT 0x000000003F0EBF78 0017AE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
[    0.000000] ACPI: LPIT 0x000000003F0ED728 000094 (v01 INTEL  KBL-ULT  00000000 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x000000003F0ED7C0 000161 (v02 INTEL  HdaDsp   00000000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000003F0ED928 00029F (v02 INTEL  sensrhub 00000000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000003F0EDBC8 003002 (v02 INTEL  PtidDevc 00001000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000003F0F0BD0 000517 (v02 INTEL  TbtTypeC 00000000 INTL 20160422)
[    0.000000] ACPI: DBGP 0x000000003F0F10E8 000034 (v01 INTEL           00000002 MSFT 0000005F)
[    0.000000] ACPI: DBG2 0x000000003F0F1120 000054 (v00 INTEL           00000002 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x000000003F0F1178 000801 (v02 INTEL  UsbCTabl 00001000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000003F0F1980 00CFC3 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
[    0.000000] ACPI: NHLT 0x000000003F0FE948 00002D (v00 INTEL  EDK2     00000002      01000013)
[    0.000000] ACPI: ASF! 0x000000003F0FE978 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.000000] ACPI: DMAR 0x000000003F0FEA18 0000F0 (v01 INTEL  KBL      00000001 INTL 00000001)
[    0.000000] ACPI: BGRT 0x000000003F0FEB08 000038 (v00                 01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000004ae7fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x4ae7e9000-0x4ae7fffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000004ae7fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000002d6f7fff]
[    0.000000]   node   0: [mem 0x000000002d6fa000-0x000000003ecf4fff]
[    0.000000]   node   0: [mem 0x000000003ffff000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000048000000-0x0000000048dfffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000004ae7fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000004ae7fffff]
[    0.000000] On node 0 totalpages: 4121232
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 4012 pages used for memmap
[    0.000000]   DMA32 zone: 256756 pages, LIFO batch:31
[    0.000000]   Normal zone: 60320 pages used for memmap
[    0.000000]   Normal zone: 3860480 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 99 pages
[    0.000000] Reserving Intel graphics memory at [mem 0x4b800000-0x4f7fffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x2d6f8000-0x2d6f8fff]
[    0.000000] PM: Registered nosave memory: [mem 0x2d6f9000-0x2d6f9fff]
[    0.000000] PM: Registered nosave memory: [mem 0x3ecf5000-0x3f0b2fff]
[    0.000000] PM: Registered nosave memory: [mem 0x3f0b3000-0x3f0fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x3f100000-0x3f7b7fff]
[    0.000000] PM: Registered nosave memory: [mem 0x3f7b8000-0x3ff26fff]
[    0.000000] PM: Registered nosave memory: [mem 0x3ff27000-0x3fffefff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x47ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x48e00000-0x4f7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x4f800000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0x4f800000-0xdfffffff] available for PCI devices
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x90/0x50e with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 44 pages/cpu @        (ptrval) s141336 r8192 d30696 u262144
[    0.000000] pcpu-alloc: s141336 r8192 d30696 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4056814
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.17.0-rc5-00009-g1150fc87af6f root=UUID=b8b2f3b6-8c20-4c2a-8895-aa2768866674 ro quiet noisapnp cryptomgr.notests mem_sleep_default=deep
[    0.000000] Memory: 16079200K/16484928K available (12300K kernel code, 1477K rwdata, 3900K rodata, 1660K init, 1272K bss, 405728K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] ftrace: allocating 36978 entries in 145 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 4352, nr_irqs: 2048, preallocated irqs: 16
[    0.000000] 	Offload RCU callbacks from CPUs: (none).
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180313
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.001000] APIC: Switch to symmetric I/O mode setup
[    0.001000] DMAR: Host address width 39
[    0.001000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.001000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.001000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.001000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.001000] DMAR: RMRR base: 0x0000003edce000 end: 0x0000003ededfff
[    0.001000] DMAR: RMRR base: 0x0000004b000000 end: 0x0000004f7fffff
[    0.001000] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[    0.001000] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[    0.001000] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.001000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.001000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.002000] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.002000] x2apic enabled
[    0.002000] Switched APIC routing to cluster x2apic.
[    0.006000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.011000] tsc: Detected 2000.000 MHz processor
[    0.011000] tsc: Detected 1992.000 MHz TSC
[    0.011000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x396d519840e, max_idle_ns: 881590569543 ns
[    0.011000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3984.00 BogoMIPS (lpj=1992000)
[    0.011000] pid_max: default: 32768 minimum: 301
[    0.011000] Security Framework initialized
[    0.011000] Yama: becoming mindful.
[    0.011000] SELinux:  Initializing.
[    0.011000] SELinux:  Starting in permissive mode
[    0.013384] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.014163] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.014200] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.014224] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.014353] CPU: Physical Processor ID: 0
[    0.014354] CPU: Processor Core ID: 0
[    0.014357] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.014357] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.014360] mce: CPU supports 10 MCE banks
[    0.014367] CPU0: Thermal monitoring enabled (TM1)
[    0.014380] process: using mwait in idle threads
[    0.014381] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.014382] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.014383] Spectre V2 : Mitigation: Full generic retpoline
[    0.014383] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[    0.014383] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.014384] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.018424] Freeing SMP alternatives memory: 36K
[    0.019881] TSC deadline timer enabled
[    0.019886] smpboot: CPU0: Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz (family: 0x6, model: 0x8e, stepping: 0xa)
[    0.019937] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.019957] ... version:                4
[    0.019957] ... bit width:              48
[    0.019958] ... generic registers:      4
[    0.019958] ... value mask:             0000ffffffffffff
[    0.019958] ... max period:             00007fffffffffff
[    0.019959] ... fixed-purpose events:   3
[    0.019959] ... event mask:             000000070000000f
[    0.019983] Hierarchical SRCU implementation.
[    0.020000] smp: Bringing up secondary CPUs ...
[    0.020000] x86: Booting SMP configuration:
[    0.020000] .... node  #0, CPUs:      #1
[    0.020220] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.020228]  #2 #3 #4 #5 #6 #7
[    0.022423] smp: Brought up 1 node, 8 CPUs
[    0.022423] smpboot: Max logical packages: 1
[    0.022423] smpboot: Total of 8 processors activated (31872.00 BogoMIPS)
[    0.023380] devtmpfs: initialized
[    0.023380] x86/mm: Memory block size: 128MB
[    0.024180] PM: Registering ACPI NVS region [mem 0x2d6f8000-0x2d6f8fff] (4096 bytes)
[    0.024180] PM: Registering ACPI NVS region [mem 0x3f100000-0x3f7b7fff] (7045120 bytes)
[    0.024180] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.024180] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.024180] xor: automatically using best checksumming function   avx       
[    0.024180] pinctrl core: initialized pinctrl subsystem
[    0.024180] RTC time: 13:27:31, date: 05/15/18
[    0.024223] NET: Registered protocol family 16
[    0.024286] audit: initializing netlink subsys (disabled)
[    0.024288] audit: type=2000 audit(1526390851.024:1): state=initialized audit_enabled=0 res=1
[    0.024288] cpuidle: using governor menu
[    0.024288] Simple Boot Flag at 0x47 set to 0x80
[    0.024288] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.024288] ACPI: bus type PCI registered
[    0.024288] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.024288] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.024288] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.024288] PCI: Using configuration type 1 for base access
[    0.025023] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.025023] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.025023] cryptd: max_cpu_qlen set to 1000
[    0.042004] raid6: sse2x1   gen() 13585 MB/s
[    0.059003] raid6: sse2x1   xor()  9984 MB/s
[    0.076004] raid6: sse2x2   gen() 16824 MB/s
[    0.093000] raid6: sse2x2   xor() 11556 MB/s
[    0.110001] raid6: sse2x4   gen() 19718 MB/s
[    0.127001] raid6: sse2x4   xor() 11789 MB/s
[    0.144001] raid6: avx2x1   gen() 25222 MB/s
[    0.161001] raid6: avx2x1   xor() 17966 MB/s
[    0.178002] raid6: avx2x2   gen() 30398 MB/s
[    0.195002] raid6: avx2x2   xor() 19857 MB/s
[    0.212000] raid6: avx2x4   gen() 35683 MB/s
[    0.229002] raid6: avx2x4   xor() 18349 MB/s
[    0.229002] raid6: using algorithm avx2x4 gen() 35683 MB/s
[    0.229003] raid6: .... xor() 18349 MB/s, rmw enabled
[    0.229003] raid6: using avx2x2 recovery algorithm
[    0.229038] ACPI: Added _OSI(Module Device)
[    0.229038] ACPI: Added _OSI(Processor Device)
[    0.229039] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.229039] ACPI: Added _OSI(Processor Aggregator Device)
[    0.229040] ACPI: Added _OSI(Linux-Dell-Video)
[    0.257961] ACPI: 11 ACPI AML tables successfully acquired and loaded
[    0.264129] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.269164] ACPI: Dynamic OEM Table Load:
[    0.269168] ACPI: SSDT 0xFFFF93A49BA9C800 0005CD (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.269449] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
[    0.270121] ACPI: Dynamic OEM Table Load:
[    0.270125] ACPI: SSDT 0xFFFF93A49BAA4000 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.270399] ACPI: Dynamic OEM Table Load:
[    0.270402] ACPI: SSDT 0xFFFF93A49BB33300 0000BA (v02 PmRef  Cpu0Hwp  00003000 INTL 20160422)
[    0.270613] ACPI: Dynamic OEM Table Load:
[    0.270616] ACPI: SSDT 0xFFFF93A49BA9E800 000628 (v02 PmRef  HwpLvt   00003000 INTL 20160422)
[    0.271056] ACPI: Dynamic OEM Table Load:
[    0.271061] ACPI: SSDT 0xFFFF93A49DD04000 000D14 (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.271673] ACPI: Dynamic OEM Table Load:
[    0.271676] ACPI: SSDT 0xFFFF93A49BAA6C00 000317 (v02 PmRef  ApHwp    00003000 INTL 20160422)
[    0.271960] ACPI: Dynamic OEM Table Load:
[    0.271963] ACPI: SSDT 0xFFFF93A49BAA3000 00030A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.273890] ACPI: EC: EC started
[    0.273890] ACPI: EC: interrupt blocked
[    0.282044] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
[    0.282046] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x6e, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[    0.282047] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions
[    0.282047] ACPI: Interpreter enabled
[    0.282080] ACPI: (supports S0 S3 S4 S5)
[    0.282081] ACPI: Using IOAPIC for interrupt routing
[    0.282114] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.282515] ACPI: Enabled 8 GPEs in block 00 to 7F
[    0.301935] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.301939] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.302158] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME AER]
[    0.302360] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability]
[    0.302361] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.302794] PCI host bridge to bus 0000:00
[    0.302796] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.302797] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.302798] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.302799] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.302800] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.302800] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.302801] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.302802] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.302803] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.302804] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.302804] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.302805] pci_bus 0000:00: root bus resource [mem 0x4f800000-0xdfffffff window]
[    0.302806] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.302807] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.302813] pci 0000:00:00.0: [8086:5914] type 00 class 0x060000
[    0.302897] pci 0000:00:02.0: [8086:5917] type 00 class 0x030000
[    0.302905] pci 0000:00:02.0: reg 0x10: [mem 0xdb000000-0xdbffffff 64bit]
[    0.302909] pci 0000:00:02.0: reg 0x18: [mem 0x50000000-0x5fffffff 64bit pref]
[    0.302912] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.302921] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.303000] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[    0.303009] pci 0000:00:04.0: reg 0x10: [mem 0xdc420000-0xdc427fff 64bit]
[    0.303163] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[    0.303182] pci 0000:00:14.0: reg 0x10: [mem 0xdc410000-0xdc41ffff 64bit]
[    0.303239] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.303239] pci 0000:00:14.0: pme_poll = true
[    0.303240] pci 0000:00:14.0: after device_set_wakeup_capable()
[    0.303242] pci 0000:00:14.0: after pci_pme_active()
[    0.303370] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[    0.303388] pci 0000:00:14.2: reg 0x10: [mem 0xdc434000-0xdc434fff 64bit]
[    0.303575] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[    0.303664] pci 0000:00:15.0: reg 0x10: [mem 0xdc433000-0xdc433fff 64bit]
[    0.303968] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[    0.304028] pci 0000:00:15.1: reg 0x10: [mem 0xdc432000-0xdc432fff 64bit]
[    0.304236] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[    0.304250] pci 0000:00:16.0: reg 0x10: [mem 0xdc431000-0xdc431fff 64bit]
[    0.304292] pci 0000:00:16.0: PME# supported from D3hot
[    0.304293] pci 0000:00:16.0: pme_poll = true
[    0.304293] pci 0000:00:16.0: after device_set_wakeup_capable()
[    0.304296] pci 0000:00:16.0: after pci_pme_active()
[    0.304420] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[    0.304473] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.304474] pci 0000:00:1c.0: pme_poll = true
[    0.304474] pci 0000:00:1c.0: after device_set_wakeup_capable()
[    0.304476] pci 0000:00:1c.0: after pci_pme_active()
[    0.304579] pci 0000:00:1c.2: [8086:9d12] type 01 class 0x060400
[    0.304631] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.304632] pci 0000:00:1c.2: pme_poll = true
[    0.304632] pci 0000:00:1c.2: after device_set_wakeup_capable()
[    0.304634] pci 0000:00:1c.2: after pci_pme_active()
[    0.304738] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
[    0.304797] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.304798] pci 0000:00:1c.4: pme_poll = true
[    0.304799] pci 0000:00:1c.4: after device_set_wakeup_capable()
[    0.304800] pci 0000:00:1c.4: after pci_pme_active()
[    0.304911] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
[    0.304963] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.304964] pci 0000:00:1d.0: pme_poll = true
[    0.304964] pci 0000:00:1d.0: after device_set_wakeup_capable()
[    0.304966] pci 0000:00:1d.0: after pci_pme_active()
[    0.305095] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100
[    0.305236] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[    0.305248] pci 0000:00:1f.2: reg 0x10: [mem 0xdc42c000-0xdc42ffff]
[    0.305359] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380
[    0.305380] pci 0000:00:1f.3: reg 0x10: [mem 0xdc428000-0xdc42bfff 64bit]
[    0.305402] pci 0000:00:1f.3: reg 0x20: [mem 0xdc400000-0xdc40ffff 64bit]
[    0.305442] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.305443] pci 0000:00:1f.3: pme_poll = true
[    0.305443] pci 0000:00:1f.3: after device_set_wakeup_capable()
[    0.305446] pci 0000:00:1f.3: after pci_pme_active()
[    0.305592] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[    0.305653] pci 0000:00:1f.4: reg 0x10: [mem 0xdc430000-0xdc4300ff 64bit]
[    0.305724] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.305940] pci 0000:01:00.0: [10ec:525a] type 00 class 0xff0000
[    0.305968] pci 0000:01:00.0: reg 0x14: [mem 0xdc300000-0xdc300fff]
[    0.306057] pci 0000:01:00.0: supports D1 D2
[    0.306058] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.306059] pci 0000:01:00.0: pme_poll = true
[    0.306059] pci 0000:01:00.0: after device_set_wakeup_capable()
[    0.306063] pci 0000:01:00.0: after pci_pme_active()
[    0.306150] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.306153] pci 0000:00:1c.0:   bridge window [mem 0xdc300000-0xdc3fffff]
[    0.306460] pci 0000:02:00.0: [168c:003e] type 00 class 0x028000
[    0.306777] pci 0000:02:00.0: reg 0x10: [mem 0xdc000000-0xdc1fffff 64bit]
[    0.307645] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.307645] pci 0000:02:00.0: pme_poll = true
[    0.307646] pci 0000:02:00.0: after device_set_wakeup_capable()
[    0.307649] pci 0000:02:00.0: after pci_pme_active()
[    0.308491] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.308494] pci 0000:00:1c.2:   bridge window [mem 0xdc000000-0xdc1fffff]
[    0.308565] pci 0000:00:1c.4: PCI bridge to [bus 03-6d]
[    0.308569] pci 0000:00:1c.4:   bridge window [mem 0xac000000-0xda0fffff]
[    0.308572] pci 0000:00:1c.4:   bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[    0.308634] pci 0000:6e:00.0: [1179:0116] type 00 class 0x010802
[    0.308659] pci 0000:6e:00.0: reg 0x10: [mem 0xdc200000-0xdc203fff 64bit]
[    0.308828] pci 0000:00:1d.0: PCI bridge to [bus 6e]
[    0.308831] pci 0000:00:1d.0:   bridge window [mem 0xdc200000-0xdc2fffff]
[    0.310015] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.310050] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.310084] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.310118] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.310152] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.310186] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.310218] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.310251] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.319118] ACPI: EC: interrupt unblocked
[    0.319130] ACPI: EC: event unblocked
[    0.319155] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x6e, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[    0.319156] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events
[    0.319195] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.319195] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.319195] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.319195] vgaarb: loaded
[    0.319195] SCSI subsystem initialized
[    0.319195] libata version 3.00 loaded.
[    0.319195] ACPI: bus type USB registered
[    0.319195] usbcore: registered new interface driver usbfs
[    0.319195] usbcore: registered new interface driver hub
[    0.319195] usbcore: registered new device driver usb
[    0.319195] EDAC MC: Ver: 3.0.0
[    0.319300] Registered efivars operations
[    0.353325] PCI: Using ACPI for IRQ routing
[    0.373481] PCI: pci_cache_line_size set to 64 bytes
[    0.373839] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.373840] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.373841] e820: reserve RAM buffer [mem 0x2d6f8000-0x2fffffff]
[    0.373841] e820: reserve RAM buffer [mem 0x3ecf5000-0x3fffffff]
[    0.373842] e820: reserve RAM buffer [mem 0x48e00000-0x4bffffff]
[    0.373842] e820: reserve RAM buffer [mem 0x4ae800000-0x4afffffff]
[    0.374000] NetLabel: Initializing
[    0.374000] NetLabel:  domain hash size = 128
[    0.374000] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.374000] NetLabel:  unlabeled traffic allowed by default
[    0.375009] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.375013] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.377011] clocksource: Switched to clocksource tsc-early
[    0.385820] VFS: Disk quotas dquot_6.6.0
[    0.385828] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.385860] pnp: PnP ACPI init
[    0.386019] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.386020] system 00:00: [io  0xffff] has been reserved
[    0.386021] system 00:00: [io  0xffff] has been reserved
[    0.386022] system 00:00: [io  0xffff] has been reserved
[    0.386023] system 00:00: [io  0x1800-0x18fe] has been reserved
[    0.386024] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.386027] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.386092] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.386120] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.386122] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.386199] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.386208] pnp 00:04: Plug and Play ACPI device, IDs DLL07e6 PNP0f13 (active)
[    0.386343] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.386344] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.386345] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.386345] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.386346] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.386347] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.386348] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.386349] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.386350] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.386351] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[    0.386353] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.386376] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.386377] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.386378] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.386379] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.386380] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.386381] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.386382] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.386384] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.386577] system 00:07: [io  0xff00-0xfffe] has been reserved
[    0.386579] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.387270] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
[    0.387271] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
[    0.387273] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.390425] pnp: PnP ACPI: found 9 devices
[    0.395655] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.395676] pci 0000:00:1c.4: bridge window [io  0x1000-0x0fff] to [bus 03-6d] add_size 1000
[    0.395683] pci 0000:00:1c.4: BAR 13: assigned [io  0x2000-0x2fff]
[    0.395685] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.395688] pci 0000:00:1c.0:   bridge window [mem 0xdc300000-0xdc3fffff]
[    0.395692] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.395695] pci 0000:00:1c.2:   bridge window [mem 0xdc000000-0xdc1fffff]
[    0.395699] pci 0000:00:1c.4: PCI bridge to [bus 03-6d]
[    0.395702] pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
[    0.395705] pci 0000:00:1c.4:   bridge window [mem 0xac000000-0xda0fffff]
[    0.395707] pci 0000:00:1c.4:   bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[    0.395711] pci 0000:00:1d.0: PCI bridge to [bus 6e]
[    0.395713] pci 0000:00:1d.0:   bridge window [mem 0xdc200000-0xdc2fffff]
[    0.395718] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.395719] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.395720] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.395721] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.395722] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.395723] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.395723] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.395724] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.395725] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.395726] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.395727] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.395728] pci_bus 0000:00: resource 15 [mem 0x4f800000-0xdfffffff window]
[    0.395728] pci_bus 0000:00: resource 16 [mem 0xfd000000-0xfe7fffff window]
[    0.395729] pci_bus 0000:01: resource 1 [mem 0xdc300000-0xdc3fffff]
[    0.395730] pci_bus 0000:02: resource 1 [mem 0xdc000000-0xdc1fffff]
[    0.395731] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.395732] pci_bus 0000:03: resource 1 [mem 0xac000000-0xda0fffff]
[    0.395733] pci_bus 0000:03: resource 2 [mem 0x60000000-0xa9ffffff 64bit pref]
[    0.395733] pci_bus 0000:6e: resource 1 [mem 0xdc200000-0xdc2fffff]
[    0.395820] NET: Registered protocol family 2
[    0.395898] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[    0.395933] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.396058] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.396147] TCP: Hash tables configured (established 131072 bind 65536)
[    0.396171] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.396199] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.396243] NET: Registered protocol family 1
[    0.396251] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.396599] PCI: CLS 0 bytes, default 64
[    0.396627] Unpacking initramfs...
[    0.406238] Freeing initrd memory: 6476K
[    0.406292] DMAR: ACPI device "device:75" under DMAR at fed91000 as 00:15.0
[    0.406293] DMAR: ACPI device "device:76" under DMAR at fed91000 as 00:15.1
[    0.406302] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.406304] software IO TLB [mem 0x33349000-0x37349000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    0.406331] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x396d519840e, max_idle_ns: 881590569543 ns
[    0.406343] clocksource: Switched to clocksource tsc
[    0.406761] alg: self-tests disabled
[    0.407110] Initialise system trusted keyrings
[    0.407135] workingset: timestamp_bits=37 max_order=22 bucket_order=0
[    0.407825] zbud: loaded
[    0.408144] pstore: using deflate compression
[    0.408172] SELinux:  Registering netfilter hooks
[    0.408911] NET: Registered protocol family 38
[    0.408912] Key type asymmetric registered
[    0.408913] Asymmetric key parser 'x509' registered
[    0.408927] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.408948] io scheduler noop registered
[    0.408949] io scheduler deadline registered
[    0.408971] io scheduler cfq registered (default)
[    0.408971] io scheduler mq-deadline registered
[    0.408972] io scheduler kyber registered
[    0.409449] efifb: probing for efifb
[    0.409457] efifb: framebuffer at 0x50000000, using 32448k, total 32448k
[    0.409458] efifb: mode is 3840x2160x32, linelength=15360, pages=1
[    0.409458] efifb: scrolling: redraw
[    0.409459] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.419142] Console: switching to colour frame buffer device 480x135
[    0.428731] fb0: EFI VGA frame buffer device
[    0.428743] intel_idle: MWAIT substates: 0x11142120
[    0.428743] intel_idle: v0.4.1 model 0x8E
[    0.428975] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.430369] ACPI: AC Adapter [AC] (off-line)
[    0.430407] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.430414] ACPI: Lid Switch [LID0]
[    0.430430] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.430434] ACPI: Power Button [PBTN]
[    0.430452] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.430455] ACPI: Sleep Button [SBTN]
[    0.430471] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.430474] ACPI: Power Button [PWRF]
[    0.432906] thermal LNXTHERM:00: registered as thermal_zone0
[    0.432906] ACPI: Thermal Zone [THM] (25 C)
[    0.433106] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.435911] Non-volatile memory driver v1.3
[    0.435922] Linux agpgart interface v0.103
[    0.436938] nvme nvme0: pci function 0000:6e:00.0
[    0.436997] libphy: Fixed MDIO Bus: probed
[    0.437029] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.437030] ehci-pci: EHCI PCI platform driver
[    0.437050] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.437051] ohci-pci: OHCI PCI platform driver
[    0.437054] uhci_hcd: USB Universal Host Controller Interface driver
[    0.437170] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.437223] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.438335] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    0.438342] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.438531] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[    0.438532] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.438533] usb usb1: Product: xHCI Host Controller
[    0.438534] usb usb1: Manufacturer: Linux 4.17.0-rc5-00009-g1150fc87af6f xhci-hcd
[    0.438535] usb usb1: SerialNumber: 0000:00:14.0
[    0.438671] hub 1-0:1.0: USB hub found
[    0.438696] hub 1-0:1.0: 12 ports detected
[    0.439667] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.439687] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.439689] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    0.439713] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.17
[    0.439713] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.439714] usb usb2: Product: xHCI Host Controller
[    0.439715] usb usb2: Manufacturer: Linux 4.17.0-rc5-00009-g1150fc87af6f xhci-hcd
[    0.439716] usb usb2: SerialNumber: 0000:00:14.0
[    0.439763] hub 2-0:1.0: USB hub found
[    0.439775] hub 2-0:1.0: 6 ports detected
[    0.440240] usb: port power management may be unreliable
[    0.441358] usbcore: registered new interface driver usb-storage
[    0.441367] usbcore: registered new interface driver usbserial_generic
[    0.441369] usbserial: USB Serial support registered for generic
[    0.441383] ioremap error for 0x3f799000-0x3f79a000, requested 0x2, got 0x0
[    0.441518] ucsi_acpi: probe of USBC000:00 failed with error -12
[    0.441535] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.442519] i8042: Warning: Keylock active
[    0.446387] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.446389] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.446516] mousedev: PS/2 mouse device common for all mice
[    0.446952] rtc_cmos 00:01: RTC can wake from S4
[    0.447528] rtc_cmos 00:01: registered as rtc0
[    0.447536] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.447558] device-mapper: uevent: version 1.0.3
[    0.447614] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    0.447664] intel_pstate: Intel P-state driver initializing
[    0.448043] intel_pstate: HWP enabled
[    0.448248] hidraw: raw HID events driver (C) Jiri Kosina
[    0.448268] usbcore: registered new interface driver usbhid
[    0.448269] usbhid: USB HID core driver
[    0.448330] intel_pmc_core:  initialized
[    0.448688] Initializing XFRM netlink socket
[    0.448766] NET: Registered protocol family 10
[    0.448911] Segment Routing with IPv6
[    0.448940] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.448974] mip6: Mobile IPv6
[    0.450004] NET: Registered protocol family 17
[    0.450739] microcode: sig=0x806ea, pf=0x80, revision=0x84
[    0.450848] microcode: Microcode Update Driver: v2.2.
[    0.450852] AVX2 version of gcm_enc/dec engaged.
[    0.450853] AES CTR mode by8 optimization enabled
[    0.451041] sched_clock: Marking stable (451038847, 0)->(450021780, 1017067)
[    0.451226] registered taskstats version 1
[    0.451227] Loading compiled-in X.509 certificates
[    0.452552] Loaded X.509 cert 'Build time autogenerated kernel key: 6966fbaf5de1e180c576cd612d99a08fe8d73af3'
[    0.452563] zswap: loaded using pool lzo/zbud
[    0.452751] Btrfs loaded, crc32c=crc32c-generic
[    0.454983] Key type big_key registered
[    0.508343]   Magic number: 2:425:483
[    0.508643] rtc_cmos 00:01: setting system clock to 2018-05-15 13:27:31 UTC (1526390851)
[    0.528456] ACPI: Battery Slot [BAT0] (battery present)
[    0.653407]  nvme0n1: p1 p2 p3 p4
[    0.721821] Freeing unused kernel memory: 1660K
[    0.731222] Write protecting the kernel read-only data: 18432k
[    0.732177] Freeing unused kernel memory: 2008K
[    0.732443] Freeing unused kernel memory: 196K
[    0.735951] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.735955] rodata_test: all tests were successful
[    0.763013] usb 1-5: new high-speed USB device number 2 using xhci_hcd
[    0.936076] usb 1-5: New USB device found, idVendor=0bda, idProduct=58f4, bcdDevice=76.05
[    0.936081] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    0.936084] usb 1-5: Product: Integrated_Webcam_HD
[    0.936088] usb 1-5: Manufacturer: CN0FFMHCLOG0081JBA49A00
[    0.936090] usb 1-5: SerialNumber: 200901010001
[    1.000094] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.020933] random: fast init done
[    1.054218] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[    1.181185] usb 1-7: New USB device found, idVendor=0489, idProduct=e0a2, bcdDevice= 0.01
[    1.181192] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.238878] psmouse serio1: synaptics: queried max coordinates: x [..5666], y [..4734]
[    1.267602] psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1118..]
[    1.267611] psmouse serio1: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience.
[    1.324574] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2a1, caps: 0xf00323/0x840300/0x12e800/0x0, board id: 3038, fw id: 2375007
[    1.360520] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[   17.155025] random: crng init done
[   21.463481] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[   21.668031] systemd[1]: systemd 238 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[   21.680517] systemd[1]: Detected architecture x86-64.
[   21.683605] systemd[1]: Set hostname to <palestrina.molgen.mpg.de>.
[   21.723732] systemd[1]: File /lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[   21.723739] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[   21.823713] systemd[1]: Listening on Process Core Dump Socket.
[   21.823804] systemd[1]: Reached target Remote File Systems.
[   21.825705] systemd[1]: Created slice User and Session Slice.
[   21.825733] systemd[1]: Reached target Slices.
[   21.825748] systemd[1]: Reached target Swap.
[   21.852224] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[   21.922193] systemd-journald[305]: Received request to flush runtime journal from PID 1
[   21.944663] input: Intel HID events as /devices/platform/INT33D5:00/input/input7
[   21.944782] intel-hid INT33D5:00: platform supports 5 button array
[   21.944814] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input8
[   21.978794] wmi_bus wmi_bus-PNP0C14:01: WQBC data block query control method not found
[   21.986288] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[   21.986328] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[   21.994346] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[   22.009329] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[   22.021102] idma64 idma64.0: Found Intel integrated DMA 64-bit
[   22.021471] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[   22.022434] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   22.022666] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   22.023159] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   22.023161] cfg80211: failed to load regulatory.db
[   22.041534] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[   22.041535] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   22.041536] RAPL PMU: hw unit of domain package 2^-14 Joules
[   22.041536] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   22.041537] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   22.041537] RAPL PMU: hw unit of domain psys 2^-14 Joules
[   22.048944] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[   22.049240] idma64 idma64.1: Found Intel integrated DMA 64-bit
[   22.060816] 1
[   22.060823] 2
[   22.060830] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[   22.060962] 3
[   22.060962] 4
[   22.060963] 5
[   22.060963] 6
[   22.060963] 7
[   22.060967] 8
[   22.060967] 9
[   22.096753] EXT4-fs (nvme0n1p4): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[   22.120826] checking generic (50000000 1fb0000) vs hw (50000000 10000000)
[   22.120827] fb: switching to inteldrmfb from EFI VGA
[   22.120845] Console: switching to colour dummy device 80x25
[   22.120918] [drm] Replacing VGA console driver
[   22.121910] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   22.121911] [drm] Driver supports precise vblank timestamp query.
[   22.122443] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   22.124085] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[   22.132888] intel_rapl: Found RAPL domain package
[   22.132889] intel_rapl: Found RAPL domain core
[   22.132890] intel_rapl: Found RAPL domain uncore
[   22.132890] intel_rapl: Found RAPL domain dram
[   22.133067] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002)
[   22.133236] [drm] Initialized i915 1.6.0 20180308 for 0000:00:02.0 on minor 0
[   22.136799] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[   22.137683] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   22.138676] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[   22.138804] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   22.145149] fbcon: inteldrmfb (fb0) is primary device
[   22.255580] input: ELAN24EE:00 04F3:24EE as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-7/i2c-ELAN24EE:00/0018:04F3:24EE.0001/input/input10
[   22.255853] hid-generic 0018:04F3:24EE.0001: input,hidraw0: I2C HID v1.00 Device [ELAN24EE:00 04F3:24EE] on i2c-ELAN24EE:00
[   22.351615] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:02:00.0.bin failed with error -2
[   22.351642] ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/cal-pci-0000:02:00.0.bin failed with error -2
[   22.354511] ath10k_pci 0000:02:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:143a
[   22.354514] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
[   22.355712] ath10k_pci 0000:02:00.0: firmware ver WLAN.RM.4.4.1-00079-QCARMSWPZ-1 api 6 features wowlan,ignore-otp crc32 fd869beb
[   22.410243] input: DELL07E6:00 06CB:76AF as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-DELL07E6:00/0018:06CB:76AF.0002/input/input11
[   22.410334] hid-generic 0018:06CB:76AF.0002: input,hidraw1: I2C HID v1.00 Mouse [DELL07E6:00 06CB:76AF] on i2c-DELL07E6:00
[   22.420507] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 20d869c3
[   22.447526] input: ELAN24EE:00 04F3:24EE as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-7/i2c-ELAN24EE:00/0018:04F3:24EE.0001/input/input12
[   22.447790] hid-multitouch 0018:04F3:24EE.0001: input,hidraw0: I2C HID v1.00 Device [ELAN24EE:00 04F3:24EE] on i2c-ELAN24EE:00
[   22.475575] input: DELL07E6:00 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-DELL07E6:00/0018:06CB:76AF.0002/input/input18
[   22.475661] hid-multitouch 0018:06CB:76AF.0002: input,hidraw1: I2C HID v1.00 Mouse [DELL07E6:00 06CB:76AF] on i2c-DELL07E6:00
[   23.002504] ath10k_pci 0000:02:00.0: Unknown eventid: 118809
[   23.005391] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[   23.009537] ath10k_pci 0000:02:00.0: htt-ver 3.47 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[   23.072306] ath: EEPROM regdomain: 0x6c
[   23.072307] ath: EEPROM indicates we should expect a direct regpair map
[   23.072309] ath: Country alpha2 being used: 00
[   23.072309] ath: Regpair used: 0x6c
[   23.080576] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
[   23.301366] Console: switching to colour frame buffer device 480x135
[   23.349474] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   23.402676] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3271: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[   23.402679] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   23.402682] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   23.402683] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   23.402685] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   23.402687] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x19
[   23.402689] snd_hda_codec_realtek hdaudioC0D0:      Headphone Mic=0x1b
[   23.402691] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   23.453341] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[   23.453389] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[   23.453432] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
[   23.453479] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
[   23.453528] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
[   23.453575] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
[   23.535785] NET: Registered protocol family 15
[   23.606545] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   24.298625] ath10k_pci 0000:02:00.0: Unknown eventid: 118809
[   24.301721] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[   24.320610] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   24.705958] fuse init (API version 7.26)
[   25.077658] ath10k_pci 0000:02:00.0: Unknown eventid: 118809
[   25.079183] ath10k_pci 0000:02:00.0: Unknown eventid: 90118
[   25.113756] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   25.168982] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   30.028947] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   34.891197] wlp2s0: authenticate with 6c:f3:7f:10:ae:18
[   34.936959] wlp2s0: send auth to 6c:f3:7f:10:ae:18 (try 1/3)
[   34.938846] wlp2s0: authenticated
[   34.939075] wlp2s0: associate with 6c:f3:7f:10:ae:18 (try 1/3)
[   34.943591] wlp2s0: RX AssocResp from 6c:f3:7f:10:ae:18 (capab=0x411 status=0 aid=3)
[   34.945739] wlp2s0: associated
[   40.011184] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready

[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 5174 bytes --]

^ permalink raw reply	[flat|nested] 19+ messages in thread
* Re: `ucsi_acpi: probe of USBC000:00 failed with error -12` on Dell XPS 13 9370
@ 2018-06-04  9:24 Kacper Pluta
  0 siblings, 0 replies; 19+ messages in thread
From: Kacper Pluta @ 2018-06-04  9:24 UTC (permalink / raw)
  To: linux-kernel; +Cc: kacper.pluta

Hey guys!

Just to let you know that I have the same problem on Dell Inspiron 13
7370. Yesterday, I made a test on 4.17RC7 together with the newest BIOS
1.8.0 (released the 1st June 2018) and the problem is still there.

dmesg | grep "error" gives

[    5.888091] ioremap error for 0x9f935000-0x9f936000, requested 0x2,
got 0x0
[    5.888158] ucsi_acpi: probe of USBC000:00 failed with error -12


Do not hesitate if you need more information.


Have a nice day,
Kacper

^ permalink raw reply	[flat|nested] 19+ messages in thread

end of thread, other threads:[~2018-06-04  9:24 UTC | newest]

Thread overview: 19+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-05-15 14:34 `ucsi_acpi: probe of USBC000:00 failed with error -12` on Dell XPS 13 9370 Paul Menzel
2018-05-15 16:00 ` Greg KH
2018-05-15 16:47   ` Paul Menzel
2018-05-16  8:02     ` Greg KH
2018-05-16 11:58       ` Heikki Krogerus
2018-05-16 12:35         ` Paul Menzel
2018-05-16 15:03           ` Mario.Limonciello
2018-05-16 16:13         ` Mario.Limonciello
2018-05-16 16:39           ` Greg KH
2018-05-17  8:59           ` Heikki Krogerus
2018-05-17 13:01             ` Mario.Limonciello
2018-05-17 13:58               ` Heikki Krogerus
2018-05-17 13:34             ` `ucsi_acpi: probe of USBC000:00 failed with error -12` on Dell XPS 13 9360/9370 Paul Menzel
2018-05-18 10:40               ` Heikki Krogerus
2018-05-18 15:08                 ` Heikki Krogerus
2018-05-18 15:15                   ` Greg Kroah-Hartman
2018-05-18 20:04                     ` Rafael J. Wysocki
2018-05-18 21:28                       ` Heikki Krogerus
2018-06-04  9:24 `ucsi_acpi: probe of USBC000:00 failed with error -12` on Dell XPS 13 9370 Kacper Pluta

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.