[U-Boot-Users] Where is all the commands?

[U-Boot-Users] Where is all the commands?

[25an]

Hi!

I have just managed to compile u-boot and managed to run it on the board
(AT91SAM9261ek) but one of the reasons why I compiled it and did not just
use the
u-boot.bin that came with board was that it did not have all the commands
that
the DENX U-Boot manual mentioned.
Fore example I am missing the iminfo,bdinfo,diskboot and dhcp commands.
Any thoughts about this.

Thanks
-- 
View this message in context: http://www.nabble.com/Where-is-all-the-commands--tf3307710.html#a9200692
Sent from the Uboot - Users mailing list archive at Nabble.com.

[U-Boot-Users] Antw: Where is all the commands?

[Niklaus Giger]

Hi

>>> 25an<mans.zigher@gmail.com> 28.02.07 10:35:28 >>>
>
>Hi!
>
>I have just managed to compile u-boot and managed to run it on the board
>(AT91SAM9261ek) but one of the reasons why I compiled it and did not just
>use the
>u-boot.bin that came with board was that it did not have all the commands
>that
>the DENX U-Boot manual mentioned.
>Fore example I am missing the iminfo,bdinfo,diskboot and dhcp commands.
>Any thoughts about this.

Take a look at the README, (look for Monitor Functions). Then change the
define CONFIG_COMMANDS in your include/configs/<board.h>.

Best regards