* [PATCH 01/30] diffutils: fix libc overrides
2011-05-18 22:26 [PATCH 00/30] 18-May-2011 Consolidated Pull Saul Wold
@ 2011-05-18 22:26 ` Saul Wold
2011-05-18 22:26 ` [PATCH 02/30] findutils: " Saul Wold
` (29 subsequent siblings)
30 siblings, 0 replies; 35+ messages in thread
From: Saul Wold @ 2011-05-18 22:26 UTC (permalink / raw)
To: openembedded-core; +Cc: Koen Kooi
From: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
---
meta/recipes-extended/diffutils/diffutils_2.8.1.bb | 2 +-
meta/recipes-extended/diffutils/diffutils_3.0.bb | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/meta/recipes-extended/diffutils/diffutils_2.8.1.bb b/meta/recipes-extended/diffutils/diffutils_2.8.1.bb
index 9489b35..0fb3a31 100644
--- a/meta/recipes-extended/diffutils/diffutils_2.8.1.bb
+++ b/meta/recipes-extended/diffutils/diffutils_2.8.1.bb
@@ -20,7 +20,7 @@ inherit autotools update-alternatives gettext
# standard functionality. regex.c actually breaks compilation
# because it uses __mempcpy, there are other things (TBD:
# see diffutils.mk in buildroot)
-EXTRA_OECONF_linux-uclibc = "--without-included-regex"
+EXTRA_OECONF_libc-uclibc = "--without-included-regex"
ALTERNATIVE_LINKS = "${bindir}/diff ${bindir}/cmp"
ALTERNATIVE_PRIORITY = "100"
diff --git a/meta/recipes-extended/diffutils/diffutils_3.0.bb b/meta/recipes-extended/diffutils/diffutils_3.0.bb
index 427efdf..ecff5cc 100644
--- a/meta/recipes-extended/diffutils/diffutils_3.0.bb
+++ b/meta/recipes-extended/diffutils/diffutils_3.0.bb
@@ -16,7 +16,7 @@ inherit autotools update-alternatives gettext
# standard functionality. regex.c actually breaks compilation
# because it uses __mempcpy, there are other things (TBD:
# see diffutils.mk in buildroot)
-EXTRA_OECONF_linux-uclibc = "--without-included-regex"
+EXTRA_OECONF_libc-uclibc = "--without-included-regex"
ALTERNATIVE_LINKS = "${bindir}/diff ${bindir}/cmp"
ALTERNATIVE_PRIORITY = "100"
--
1.7.3.4
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH 02/30] findutils: fix libc overrides
2011-05-18 22:26 [PATCH 00/30] 18-May-2011 Consolidated Pull Saul Wold
2011-05-18 22:26 ` [PATCH 01/30] diffutils: fix libc overrides Saul Wold
@ 2011-05-18 22:26 ` Saul Wold
2011-05-18 22:26 ` [PATCH 03/30] lsof: " Saul Wold
` (28 subsequent siblings)
30 siblings, 0 replies; 35+ messages in thread
From: Saul Wold @ 2011-05-18 22:26 UTC (permalink / raw)
To: openembedded-core; +Cc: Koen Kooi
From: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
---
meta/recipes-extended/findutils/findutils.inc | 2 +-
.../recipes-extended/findutils/findutils_4.2.31.bb | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/meta/recipes-extended/findutils/findutils.inc b/meta/recipes-extended/findutils/findutils.inc
index 673eada..7a07ad5 100644
--- a/meta/recipes-extended/findutils/findutils.inc
+++ b/meta/recipes-extended/findutils/findutils.inc
@@ -19,4 +19,4 @@ inherit autotools gettext
# standard functionality. regex.c actually breaks compilation
# because it uses __mempcpy, there are other things (TBD:
# see diffutils.mk in buildroot)
-EXTRA_OECONF_linux-uclibc = "--without-included-regex"
+EXTRA_OECONF_libc-uclibc = "--without-included-regex"
diff --git a/meta/recipes-extended/findutils/findutils_4.2.31.bb b/meta/recipes-extended/findutils/findutils_4.2.31.bb
index 3e187b5..0889f0f 100644
--- a/meta/recipes-extended/findutils/findutils_4.2.31.bb
+++ b/meta/recipes-extended/findutils/findutils_4.2.31.bb
@@ -20,7 +20,7 @@ inherit autotools gettext
# standard functionality. regex.c actually breaks compilation
# because it uses __mempcpy, there are other things (TBD:
# see diffutils.mk in buildroot)
-EXTRA_OECONF_linux-uclibc = "--without-included-regex"
+EXTRA_OECONF_libc-uclibc = "--without-included-regex"
do_install_append () {
if [ -e ${D}${bindir}/find ]; then
--
1.7.3.4
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH 03/30] lsof: fix libc overrides
2011-05-18 22:26 [PATCH 00/30] 18-May-2011 Consolidated Pull Saul Wold
2011-05-18 22:26 ` [PATCH 01/30] diffutils: fix libc overrides Saul Wold
2011-05-18 22:26 ` [PATCH 02/30] findutils: " Saul Wold
@ 2011-05-18 22:26 ` Saul Wold
2011-05-18 22:26 ` [PATCH 04/30] sysstat: " Saul Wold
` (27 subsequent siblings)
30 siblings, 0 replies; 35+ messages in thread
From: Saul Wold @ 2011-05-18 22:26 UTC (permalink / raw)
To: openembedded-core; +Cc: Koen Kooi
From: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
---
meta/recipes-extended/lsof/lsof_4.84.bb | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/meta/recipes-extended/lsof/lsof_4.84.bb b/meta/recipes-extended/lsof/lsof_4.84.bb
index 960d837..9e76096 100644
--- a/meta/recipes-extended/lsof/lsof_4.84.bb
+++ b/meta/recipes-extended/lsof/lsof_4.84.bb
@@ -23,8 +23,8 @@ python do_unpack () {
}
export LSOF_OS = "${TARGET_OS}"
-LSOF_OS_linux-uclibc = "linux"
-LSOF_OS_linux-gnueabi = "linux"
+LSOF_OS_libc-uclibc = "linux"
+LSOF_OS_libc-glibc = "linux"
export LSOF_INCLUDE = "${STAGING_INCDIR}"
do_configure () {
--
1.7.3.4
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH 04/30] sysstat: fix libc overrides
2011-05-18 22:26 [PATCH 00/30] 18-May-2011 Consolidated Pull Saul Wold
` (2 preceding siblings ...)
2011-05-18 22:26 ` [PATCH 03/30] lsof: " Saul Wold
@ 2011-05-18 22:26 ` Saul Wold
2011-05-18 22:26 ` [PATCH 05/30] tcp-wrappers: " Saul Wold
` (26 subsequent siblings)
30 siblings, 0 replies; 35+ messages in thread
From: Saul Wold @ 2011-05-18 22:26 UTC (permalink / raw)
To: openembedded-core; +Cc: Koen Kooi
From: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
---
meta/recipes-extended/sysstat/sysstat.inc | 4 +---
1 files changed, 1 insertions(+), 3 deletions(-)
diff --git a/meta/recipes-extended/sysstat/sysstat.inc b/meta/recipes-extended/sysstat/sysstat.inc
index a4cad0e..4756016 100644
--- a/meta/recipes-extended/sysstat/sysstat.inc
+++ b/meta/recipes-extended/sysstat/sysstat.inc
@@ -27,6 +27,4 @@ pkg_postinst_${PN} () {
FILES_${PN} += "${libdir}/sa"
TARGET_CC_ARCH += "${LDFLAGS}"
-LDFLAGS_append_linux-uclibc = " -lintl"
-LDFLAGS_append_linux-uclibceabi = " -lintl"
-LDFLAGS_append_linux-uclibcspe = " -lintl"
+LDFLAGS_append_libc-uclibc = " -lintl"
--
1.7.3.4
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH 05/30] tcp-wrappers: fix libc overrides
2011-05-18 22:26 [PATCH 00/30] 18-May-2011 Consolidated Pull Saul Wold
` (3 preceding siblings ...)
2011-05-18 22:26 ` [PATCH 04/30] sysstat: " Saul Wold
@ 2011-05-18 22:26 ` Saul Wold
2011-05-18 22:26 ` [PATCH 06/30] linux-yocto: fix gcc 4.6.0 compilation failures Saul Wold
` (25 subsequent siblings)
30 siblings, 0 replies; 35+ messages in thread
From: Saul Wold @ 2011-05-18 22:26 UTC (permalink / raw)
To: openembedded-core; +Cc: Koen Kooi
From: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
---
.../tcp-wrappers/tcp-wrappers_7.6.bb | 3 +--
1 files changed, 1 insertions(+), 2 deletions(-)
diff --git a/meta/recipes-extended/tcp-wrappers/tcp-wrappers_7.6.bb b/meta/recipes-extended/tcp-wrappers/tcp-wrappers_7.6.bb
index daaa2f7..d5e334e 100644
--- a/meta/recipes-extended/tcp-wrappers/tcp-wrappers_7.6.bb
+++ b/meta/recipes-extended/tcp-wrappers/tcp-wrappers_7.6.bb
@@ -71,8 +71,7 @@ EXTRA_OEMAKE = "'CC=${CC}' \
'EXTRA_CFLAGS=${CFLAGS} -DSYS_ERRLIST_DEFINED -DHAVE_STRERROR -DHAVE_WEAKSYMS -D_REENTRANT -DINET6=1 -Dss_family=__ss_family -Dss_len=__ss_len'"
EXTRA_OEMAKE_NETGROUP = "-DNETGROUP -DUSE_GETDOMAIN"
-EXTRA_OEMAKE_NETGROUP_linux-uclibc = "-DUSE_GETDOMAIN"
-EXTRA_OEMAKE_NETGROUP_linux-uclibceabi = "-DUSE_GETDOMAIN"
+EXTRA_OEMAKE_NETGROUP_libc-uclibc = "-DUSE_GETDOMAIN"
do_compile () {
oe_runmake 'TABLES=-DHOSTS_DENY=\"${sysconfdir}/hosts.deny\" -DHOSTS_ALLOW=\"${sysconfdir}/hosts.allow\"' \
--
1.7.3.4
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH 06/30] linux-yocto: fix gcc 4.6.0 compilation failures
2011-05-18 22:26 [PATCH 00/30] 18-May-2011 Consolidated Pull Saul Wold
` (4 preceding siblings ...)
2011-05-18 22:26 ` [PATCH 05/30] tcp-wrappers: " Saul Wold
@ 2011-05-18 22:26 ` Saul Wold
2011-05-18 22:26 ` [PATCH 07/30] lsbsetup: Rename this file and add a link for lsb test Saul Wold
` (24 subsequent siblings)
30 siblings, 0 replies; 35+ messages in thread
From: Saul Wold @ 2011-05-18 22:26 UTC (permalink / raw)
To: openembedded-core
From: Bruce Ashfield <bruce.ashfield@windriver.com>
Fixes bug: [YOCTO #1035]
Fixes bug: [YOCTO #1036]
Fixes gcc 4.6.0 compliation issues by importing the upstream change:
Author: Michal Marek <mmarek@suse.cz>
Date: Mon May 2 12:13:01 2011 +0000
kbuild: Fix passing -Wno-* options to gcc 4.4+
Starting with 4.4, gcc will happily accept -Wno-<anything> in the
cc-option test and complain later when compiling a file that has some
other warning. This rather unexpected behavior is intentional as per
http://gcc.gnu.org/PR28322, so work around it by testing for support of
the opposite option (without the no-). Introduce a new Makefile function
cc-disable-warning that does this and update two uses of cc-option in
the toplevel Makefile.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Integrated-by: Bruce Ashfield <bruce.ashfield@windriver.com>
:100644 100644 0ef00bd... 1d8e7e9... M Documentation/kbuild/makefiles.txt
:100644 100644 7bd863e0.. 74bac80... M Makefile
:100644 100644 ed2773e... ba25c44... M scripts/Kbuild.include
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
---
meta/recipes-kernel/linux/linux-yocto_git.bb | 12 ++++++------
1 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/meta/recipes-kernel/linux/linux-yocto_git.bb b/meta/recipes-kernel/linux/linux-yocto_git.bb
index 3e828c2..5c3c448 100644
--- a/meta/recipes-kernel/linux/linux-yocto_git.bb
+++ b/meta/recipes-kernel/linux/linux-yocto_git.bb
@@ -14,12 +14,12 @@ KMETA = meta
LINUX_VERSION ?= "2.6.37"
LINUX_VERSION_EXTENSION ?= "-yocto-${LINUX_KERNEL_TYPE}"
-SRCREV_machine_qemuarm = "b0375c21e29453458f9aa9986dc3f1ec69bf1aef"
-SRCREV_machine_qemumips = "f5d26f2eda2be8b942172cda8f27de33ebf38ec3"
-SRCREV_machine_qemuppc = "7eb6c68d977d9039a2b5a734172b064a9d19cdc1"
-SRCREV_machine_qemux86 = "ad62d1aab734513cd96c8f4517f816420a218e77"
-SRCREV_machine_qemux86-64 = "b906f358fd404a1e74a961f25079274e0d933ee1"
-SRCREV_machine = "b906f358fd404a1e74a961f25079274e0d933ee1"
+SRCREV_machine_qemuarm = "8776b242fe2db7b4570e11496e9105b51212a446"
+SRCREV_machine_qemumips = "8f8a5e034d7e98ed871fa7ed487fbf72a79229a5"
+SRCREV_machine_qemuppc = "d9c6b3e576184f0c4223b6251c57b16ac1bac428"
+SRCREV_machine_qemux86 = "b2afed7ecd54918b73db7f30062aaaf02fdaba54"
+SRCREV_machine_qemux86-64 = "86bbbc079652d87392322fbfc14f6bd8792b0f38"
+SRCREV_machine = "0974631b821b70aee3613723ed0d4d6ba8da91c6"
SRCREV_meta = "79669230fd82a3e7e254cf8b596a2388a4333e62"
PR = "r18"
--
1.7.3.4
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH 07/30] lsbsetup: Rename this file and add a link for lsb test
2011-05-18 22:26 [PATCH 00/30] 18-May-2011 Consolidated Pull Saul Wold
` (5 preceding siblings ...)
2011-05-18 22:26 ` [PATCH 06/30] linux-yocto: fix gcc 4.6.0 compilation failures Saul Wold
@ 2011-05-18 22:26 ` Saul Wold
2011-05-18 22:26 ` [PATCH 08/30] package-index.bb: add support for deb and rpm Saul Wold
` (23 subsequent siblings)
30 siblings, 0 replies; 35+ messages in thread
From: Saul Wold @ 2011-05-18 22:26 UTC (permalink / raw)
To: openembedded-core; +Cc: Xiaofeng Yan
From: Xiaofeng Yan <xiaofeng.yan@windriver.com>
[YOCTO #1079]
Rename this file version from 0.9 to 1.0.
Link time environment for Hong Kong time for lsb test.
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Added yocto bugid
Signed-off-by: Saul Wold <sgw@linux.intel.com>
---
meta/recipes-extended/lsb/lsbsetup_0.9.bb | 25 -------------------------
meta/recipes-extended/lsb/lsbsetup_1.0.bb | 27 +++++++++++++++++++++++++++
2 files changed, 27 insertions(+), 25 deletions(-)
delete mode 100644 meta/recipes-extended/lsb/lsbsetup_0.9.bb
create mode 100644 meta/recipes-extended/lsb/lsbsetup_1.0.bb
diff --git a/meta/recipes-extended/lsb/lsbsetup_0.9.bb b/meta/recipes-extended/lsb/lsbsetup_0.9.bb
deleted file mode 100644
index f3651e2..0000000
--- a/meta/recipes-extended/lsb/lsbsetup_0.9.bb
+++ /dev/null
@@ -1,25 +0,0 @@
-DESCRIPTION = "auto-setup environment for lsb test"
-SECTION = "console/utils"
-PRIORITY = "required"
-LICENSE = "GPLv2"
-PR = "r3"
-
-LIC_FILES_CHKSUM = "file://LSB_Setup.sh;beginline=3;endline=16;md5=97451c7c0786ce5bbe9ac58042945583"
-
-SRC_URI = "file://LSB_Setup.sh"
-
-S=${WORKDIR}
-
-do_install() {
- # Only install file if it has a contents
- install -d ${D}/usr/bin
- install -m 0755 ${S}/LSB_Setup.sh ${D}/usr/bin
- install -d ${D}/usr/lib/lsb
- ln -sf ${base_sbindir}/chkconfig ${D}/${libdir}/lsb/install_initd
- ln -sf ${base_sbindir}/chkconfig ${D}/${libdir}/lsb/remove_initd
- ln -sf ${sbindir}/sendmail ${D}/${libdir}/sendmail
-}
-
-FILES_${PN} += "${libdir}/lsb \
- ${libdir}/* \
- "
diff --git a/meta/recipes-extended/lsb/lsbsetup_1.0.bb b/meta/recipes-extended/lsb/lsbsetup_1.0.bb
new file mode 100644
index 0000000..247f9bc
--- /dev/null
+++ b/meta/recipes-extended/lsb/lsbsetup_1.0.bb
@@ -0,0 +1,27 @@
+DESCRIPTION = "auto-setup environment for lsb test"
+SECTION = "console/utils"
+PRIORITY = "required"
+LICENSE = "GPLv2"
+PR = "r3"
+
+LIC_FILES_CHKSUM = "file://LSB_Setup.sh;beginline=3;endline=16;md5=97451c7c0786ce5bbe9ac58042945583"
+
+SRC_URI = "file://LSB_Setup.sh"
+
+S=${WORKDIR}
+
+do_install() {
+ # Only install file if it has a contents
+ install -d ${D}/usr/bin
+ install -d ${D}/${sysconfdir}
+ install -m 0755 ${S}/LSB_Setup.sh ${D}/usr/bin
+ install -d ${D}/usr/lib/lsb
+ ln -sf ${base_sbindir}/chkconfig ${D}/${libdir}/lsb/install_initd
+ ln -sf ${base_sbindir}/chkconfig ${D}/${libdir}/lsb/remove_initd
+ ln -sf ${sbindir}/sendmail ${D}/${libdir}/sendmail
+ ln -sf ${datadir}/zoneinfo/Asia/Hong_Kong ${D}${sysconfdir}/localtime
+}
+
+FILES_${PN} += "${libdir}/lsb \
+ ${libdir}/* \
+ "
--
1.7.3.4
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH 08/30] package-index.bb: add support for deb and rpm.
2011-05-18 22:26 [PATCH 00/30] 18-May-2011 Consolidated Pull Saul Wold
` (6 preceding siblings ...)
2011-05-18 22:26 ` [PATCH 07/30] lsbsetup: Rename this file and add a link for lsb test Saul Wold
@ 2011-05-18 22:26 ` Saul Wold
2011-05-19 22:33 ` Richard Purdie
2011-05-18 22:26 ` [PATCH 09/30] extract bitbake config setting into data_define, use more variables replacing hardcoded values Saul Wold
` (22 subsequent siblings)
30 siblings, 1 reply; 35+ messages in thread
From: Saul Wold @ 2011-05-18 22:26 UTC (permalink / raw)
To: openembedded-core
From: Dexuan Cui <dexuan.cui@intel.com>
[YOCTO #1024]
Currently package-index.bb only supports ipk. This commit adds the support
for rpm and deb, too.
------------------------------
How to generate and use repos:
1) run "bitbake package-index" after building some target,
e.g., core-image-sato-sdk;
2) export ${DEPLOY_DIR_RPM}, ${DEPLOY_DIR_IPK} and ${DEPLOY_DIR_DEB} by a
webserver on the host, assuming the host IP is 192.168.7.1, at
http://192.168.7.1/rpm
http://192.168.7.1/ipk
http://192.168.7.1/deb
3) inside the target, according to the packaging system (rpm, ipk or deb) used
when we generate the target image, we can use different ways to manage
packages:
3.1) RPM
run "zypper addrepo http://192.168.7.1/rpm main; zypper refresh"
to retrieve info about the repo; next, we can use "zypper install/remove"
to manage packages.
3.2) IPK
add the repo info into opkg config file, i.e., in
/etc/opkg/arch.conf, we can add something like
"src i586 http://192.168.7.1/ipk/i586", and next, we run "opkg update" to
make opkg update the list of available packages. And later, we can use
"opkg install/remove" to manage packages.
3.3) DEB
Currently in target, some important config files, like
/var/lib/dpkg/status and /etc/apt/sources.list, for deb/apt are missing. So
we can't install/remove package in target at present.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
---
meta/classes/package_deb.bbclass | 9 +++++++++
meta/classes/package_ipk.bbclass | 9 +++++++++
meta/classes/package_rpm.bbclass | 9 +++++++++
meta/recipes-core/meta/package-index.bb | 6 ++----
4 files changed, 29 insertions(+), 4 deletions(-)
diff --git a/meta/classes/package_deb.bbclass b/meta/classes/package_deb.bbclass
index 4faeb4a..f9ef32c 100644
--- a/meta/classes/package_deb.bbclass
+++ b/meta/classes/package_deb.bbclass
@@ -431,3 +431,12 @@ python do_package_write_deb () {
do_package_write_deb[dirs] = "${PKGWRITEDIRDEB}"
addtask package_write_deb before do_package_write after do_package
+
+PACKAGEINDEXES += "package_index_deb;"
+PACKAGEINDEXDEPS += "dpkg-native:do_populate_sysroot"
+PACKAGEINDEXDEPS += "apt-native:do_populate_sysroot"
+
+package_index_deb() {
+ package_update_index_deb
+}
+
diff --git a/meta/classes/package_ipk.bbclass b/meta/classes/package_ipk.bbclass
index 3c2472b..97de17a 100644
--- a/meta/classes/package_ipk.bbclass
+++ b/meta/classes/package_ipk.bbclass
@@ -386,3 +386,12 @@ python do_package_write_ipk () {
}
do_package_write_ipk[dirs] = "${PKGWRITEDIRIPK}"
addtask package_write_ipk before do_package_write after do_package
+
+PACKAGEINDEXES += "package_index_ipk;"
+PACKAGEINDEXDEPS += "opkg-utils-native:do_populate_sysroot"
+PACKAGEINDEXDEPS += "opkg-native:do_populate_sysroot"
+
+package_index_ipk() {
+ package_update_index_ipk
+}
+
diff --git a/meta/classes/package_rpm.bbclass b/meta/classes/package_rpm.bbclass
index 1cf9f79..390d17c 100644
--- a/meta/classes/package_rpm.bbclass
+++ b/meta/classes/package_rpm.bbclass
@@ -815,3 +815,12 @@ python do_package_write_rpm () {
do_package_write_rpm[dirs] = "${PKGWRITEDIRRPM}"
addtask package_write_rpm before do_package_write after do_package
+PACKAGEINDEXES += "package_index_rpm;"
+PACKAGEINDEXDEPS += "rpm-native:do_populate_sysroot"
+PACKAGEINDEXDEPS += "createrepo-native:do_populate_sysroot"
+
+package_index_rpm() {
+ package_update_index_rpm
+ createrepo "${DEPLOY_DIR_RPM}"
+}
+
diff --git a/meta/recipes-core/meta/package-index.bb b/meta/recipes-core/meta/package-index.bb
index 3c642cb..bf3922f 100644
--- a/meta/recipes-core/meta/package-index.bb
+++ b/meta/recipes-core/meta/package-index.bb
@@ -19,13 +19,11 @@ do_package_write_deb[noexec] = "1"
do_populate_sysroot[noexec] = "1"
do_package_index[nostamp] = "1"
-do_package_index[dirs] = "${DEPLOY_DIR_IPK}"
-do_package_index[depends] += "opkg-utils-native:do_populate_sysroot"
-do_package_index[depends] += "opkg-native:do_populate_sysroot"
+do_package_index[depends] += "${PACKAGEINDEXDEPS}"
do_package_index() {
set -ex
- package_update_index_ipk
+ ${PACKAGEINDEXES}
set +ex
}
addtask do_package_index before do_build
--
1.7.3.4
^ permalink raw reply related [flat|nested] 35+ messages in thread* Re: [PATCH 08/30] package-index.bb: add support for deb and rpm.
2011-05-18 22:26 ` [PATCH 08/30] package-index.bb: add support for deb and rpm Saul Wold
@ 2011-05-19 22:33 ` Richard Purdie
2011-05-20 1:13 ` Cui, Dexuan
0 siblings, 1 reply; 35+ messages in thread
From: Richard Purdie @ 2011-05-19 22:33 UTC (permalink / raw)
To: Patches and discussions about the oe-core layer
Hi,
We're nearly there with this, I'd like just one other tweak please:
On Thu, 2011-05-19 at 12:19 -0700, Saul Wold wrote:
> diff --git a/meta/classes/package_deb.bbclass b/meta/classes/package_deb.bbclass
> index 4faeb4a..f9ef32c 100644
> --- a/meta/classes/package_deb.bbclass
> +++ b/meta/classes/package_deb.bbclass
> @@ -431,3 +431,12 @@ python do_package_write_deb () {
> do_package_write_deb[dirs] = "${PKGWRITEDIRDEB}"
> addtask package_write_deb before do_package_write after do_package
>
> +
> +PACKAGEINDEXES += "package_index_deb;"
> +PACKAGEINDEXDEPS += "dpkg-native:do_populate_sysroot"
> +PACKAGEINDEXDEPS += "apt-native:do_populate_sysroot"
> +
> +package_index_deb() {
> + package_update_index_deb
> +}
Can't we just do +PACKAGEINDEXES += "package_update_index_deb;"
instead of adding the function?
> diff --git a/meta/classes/package_ipk.bbclass b/meta/classes/package_ipk.bbclass
> index 3c2472b..97de17a 100644
> --- a/meta/classes/package_ipk.bbclass
> +++ b/meta/classes/package_ipk.bbclass
> @@ -386,3 +386,12 @@ python do_package_write_ipk () {
> }
> do_package_write_ipk[dirs] = "${PKGWRITEDIRIPK}"
> addtask package_write_ipk before do_package_write after do_package
> +
> +PACKAGEINDEXES += "package_index_ipk;"
> +PACKAGEINDEXDEPS += "opkg-utils-native:do_populate_sysroot"
> +PACKAGEINDEXDEPS += "opkg-native:do_populate_sysroot"
> +
> +package_index_ipk() {
> + package_update_index_ipk
> +}
ditto?
Cheers,
Richard
^ permalink raw reply [flat|nested] 35+ messages in thread* Re: [PATCH 08/30] package-index.bb: add support for deb and rpm.
2011-05-19 22:33 ` Richard Purdie
@ 2011-05-20 1:13 ` Cui, Dexuan
0 siblings, 0 replies; 35+ messages in thread
From: Cui, Dexuan @ 2011-05-20 1:13 UTC (permalink / raw)
To: 'Patches and discussions about the oe-core layer'
Richard Purdie wrote:
> Hi,
>
> We're nearly there with this, I'd like just one other tweak please:
>
> On Thu, 2011-05-19 at 12:19 -0700, Saul Wold wrote:
>> diff --git a/meta/classes/package_deb.bbclass
>> b/meta/classes/package_deb.bbclass index 4faeb4a..f9ef32c 100644 ---
>> a/meta/classes/package_deb.bbclass +++
>> b/meta/classes/package_deb.bbclass @@ -431,3 +431,12 @@ python
>> do_package_write_deb () { do_package_write_deb[dirs] =
>> "${PKGWRITEDIRDEB}" addtask package_write_deb before
>> do_package_write after do_package
>>
>> +
>> +PACKAGEINDEXES += "package_index_deb;"
>> +PACKAGEINDEXDEPS += "dpkg-native:do_populate_sysroot"
>> +PACKAGEINDEXDEPS += "apt-native:do_populate_sysroot" +
>> +package_index_deb() {
>> + package_update_index_deb
>> +}
>
> Can't we just do +PACKAGEINDEXES += "package_update_index_deb;"
>
> instead of adding the function?
Richard, thanks for the suggestion!
I made a new git commit at: please review it:
http://git.pokylinux.org/cgit.cgi/poky-contrib/commit/?h=dcui/master&id=949f58a3ff0b4227986cff2c165a0d49aa2631cc
Thanks,
-- Dexuan
^ permalink raw reply [flat|nested] 35+ messages in thread
* [PATCH 09/30] extract bitbake config setting into data_define, use more variables replacing hardcoded values
2011-05-18 22:26 [PATCH 00/30] 18-May-2011 Consolidated Pull Saul Wold
` (7 preceding siblings ...)
2011-05-18 22:26 ` [PATCH 08/30] package-index.bb: add support for deb and rpm Saul Wold
@ 2011-05-18 22:26 ` Saul Wold
2011-05-18 22:26 ` [PATCH 10/30] Add adt repo checking Saul Wold
` (21 subsequent siblings)
30 siblings, 0 replies; 35+ messages in thread
From: Saul Wold @ 2011-05-18 22:26 UTC (permalink / raw)
To: openembedded-core
From: Jessica Zhang <jessica.zhang@intel.com>
Signed-off-by: Jessica Zhang <jessica.zhang@intel.com>
---
.../installer/adt-installer/adt_installer | 2 +-
.../installer/adt-installer/adt_installer.conf | 2 +-
.../adt-installer/scripts/adt_installer_internal | 4 ++--
.../installer/adt-installer/scripts/data_define | 1 -
.../installer/adt-installer_1.0.bb | 4 +++-
5 files changed, 7 insertions(+), 6 deletions(-)
diff --git a/meta/recipes-devtools/installer/adt-installer/adt_installer b/meta/recipes-devtools/installer/adt-installer/adt_installer
index ea36674..9336b9e 100755
--- a/meta/recipes-devtools/installer/adt-installer/adt_installer
+++ b/meta/recipes-devtools/installer/adt-installer/adt_installer
@@ -48,7 +48,7 @@ usage ()
echo_info "# Install Qemu:\t\t\t$YOCTOADT_QEMU"
echo_info "# Install NFS utilities:\t$YOCTOADT_NFS_UTIL"
#echo_info "# Install bitbake + UI:\t\t$YOCTOADT_BITBAKE"
- #echo_info "# Install poky metadata:\t$YOCTOADT_METADATA"
+ #echo_info "# Install metadata:\t$YOCTOADT_METADATA"
#echo_info "############################################################################\n"
echo_info "\n##############################################################################"
diff --git a/meta/recipes-devtools/installer/adt-installer/adt_installer.conf b/meta/recipes-devtools/installer/adt-installer/adt_installer.conf
index d2af70d..b518c53 100644
--- a/meta/recipes-devtools/installer/adt-installer/adt_installer.conf
+++ b/meta/recipes-devtools/installer/adt-installer/adt_installer.conf
@@ -23,7 +23,7 @@
# Your yocto distro repository, this should include IPKG based packages and root filesystem files where the installation is based on
-YOCTOADT_IPKG_REPO="http://adtrepo.yoctoproject.org/1.0/rootfs"
+YOCTOADT_IPKG_REPO="http://adtrepo.yoctoproject.org/$YOCTOADT_VERSION/rootfs"
# The following are for system wide setup
# Target architectures that you want to setup host cross dev environment for
diff --git a/meta/recipes-devtools/installer/adt-installer/scripts/adt_installer_internal b/meta/recipes-devtools/installer/adt-installer/scripts/adt_installer_internal
index 8d4e01b..870931e 100755
--- a/meta/recipes-devtools/installer/adt-installer/scripts/adt_installer_internal
+++ b/meta/recipes-devtools/installer/adt-installer/scripts/adt_installer_internal
@@ -29,11 +29,11 @@ parse_config()
case $INST_ARCH in
i[3-6]86)
OPKG_CONFIG_FILE=$YOCTOADT_OPKG_CONF_FILE_32
- OECORE_NATIVE_SYSROOT="$INSTALL_FOLDER/sysroots/$INST_ARCH-${SDK_VENDOR}-linux/"
+ OECORE_NATIVE_SYSROOT="$INSTALL_FOLDER/sysroots/$INST_ARCH$SDK_VENDOR-linux/"
;;
x86_64)
OPKG_CONFIG_FILE=$YOCTOADT_OPKG_CONF_FILE_64
- OECORE_NATIVE_SYSROOT="$INSTALL_FOLDER/sysroots/x86_64-${SDK_VENDOR}-linux/"
+ OECORE_NATIVE_SYSROOT="$INSTALL_FOLDER/sysroots/x86_64$SDK_VENDOR-linux/"
;;
*)
echo_info "[ADT_INST] Error: Installation Machine is not supported!"
diff --git a/meta/recipes-devtools/installer/adt-installer/scripts/data_define b/meta/recipes-devtools/installer/adt-installer/scripts/data_define
index ca1d47c..2781e77 100644
--- a/meta/recipes-devtools/installer/adt-installer/scripts/data_define
+++ b/meta/recipes-devtools/installer/adt-installer/scripts/data_define
@@ -37,4 +37,3 @@ YOCTOADT_SUPPORTED_TARGETS="x86 x86_64 arm ppc mips"
# configuration files
YOCTOADT_OPKG_CONF_FILE_32="./opkg/conf/opkg-sdk-i686.conf"
YOCTOADT_OPKG_CONF_FILE_64="./opkg/conf/opkg-sdk-x86_64.conf"
-INSTALL_FOLDER=/opt/poky/$YOCTOADT_VERSION
diff --git a/meta/recipes-devtools/installer/adt-installer_1.0.bb b/meta/recipes-devtools/installer/adt-installer_1.0.bb
index 4a3e4de..8f6e91f 100644
--- a/meta/recipes-devtools/installer/adt-installer_1.0.bb
+++ b/meta/recipes-devtools/installer/adt-installer_1.0.bb
@@ -31,7 +31,7 @@ ALLOW_EMPTY = "1"
PACKAGES = ""
PACKAGE_ARCH = "all"
-PR = "r0"
+PR = "r3"
ADT_DEPLOY = "${TMPDIR}/deploy/sdk/"
ADT_DIR = "${WORKDIR}/adt-installer/"
@@ -69,6 +69,8 @@ fakeroot do_deploy () {
echo 'YOCTOADT_VERSION=${SDK_VERSION}' > ${ADT_DIR}/temp.conf
cat ${ADT_DIR}/adt_installer.conf >> ${ADT_DIR}/temp.conf
mv ${ADT_DIR}/temp.conf ${ADT_DIR}/adt_installer.conf
+ echo 'SDK_VENDOR=${SDK_VENDOR}' >> ${ADT_DIR}/scripts/data_define
+ echo 'INSTALL_FOLDER=${SDKPATH}' >> ${ADT_DIR}/scripts/data_define
tar cfj adt_installer.tar.bz2 adt-installer
cp ${WORKDIR}/adt_installer.tar.bz2 ${ADT_DEPLOY}
}
--
1.7.3.4
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH 10/30] Add adt repo checking
2011-05-18 22:26 [PATCH 00/30] 18-May-2011 Consolidated Pull Saul Wold
` (8 preceding siblings ...)
2011-05-18 22:26 ` [PATCH 09/30] extract bitbake config setting into data_define, use more variables replacing hardcoded values Saul Wold
@ 2011-05-18 22:26 ` Saul Wold
2011-05-18 22:26 ` [PATCH 11/30] utils.bbclass: modify create_wrapper to correctly follow symlinks Saul Wold
` (20 subsequent siblings)
30 siblings, 0 replies; 35+ messages in thread
From: Saul Wold @ 2011-05-18 22:26 UTC (permalink / raw)
To: openembedded-core
From: Jessica Zhang <jessica.zhang@intel.com>
Signed-off-by: Jessica Zhang <jessica.zhang@intel.com>
---
.../installer/adt-installer/adt_installer | 13 ++++++++++++-
.../installer/adt-installer/adt_installer.conf | 2 +-
2 files changed, 13 insertions(+), 2 deletions(-)
diff --git a/meta/recipes-devtools/installer/adt-installer/adt_installer b/meta/recipes-devtools/installer/adt-installer/adt_installer
index 9336b9e..1dd07b7 100755
--- a/meta/recipes-devtools/installer/adt-installer/adt_installer
+++ b/meta/recipes-devtools/installer/adt-installer/adt_installer
@@ -228,7 +228,7 @@ if [ -f "$LOCAL_DOWNLOAD/$filename" ]; then
fi
fi
echo_info "Downloading file: $filename..."
-wget "$YOCTOADT_IPKG_REPO/$1" -P $LOCAL_DOWNLOAD --progress=bar:force 2>&1 | tee -a "$YOCTOADT_INSTALL_LOG_FILE"
+wget "$YOCTOADT_REPO/rootfs/$1" -P $LOCAL_DOWNLOAD --progress=bar:force 2>&1 | tee -a "$YOCTOADT_INSTALL_LOG_FILE"
}
@@ -339,6 +339,17 @@ user_inst_type="$?"
validate_config
check_result
+
+#check adt_repo exist
+wget $YOCTOADT_REPO 2>&1 | tee -a "$YOCTOADT_INSTALL_LOG_FILE"
+if grep -q "ERROR 404: Not Found" $YOCTOADT_INSTALL_LOG_FILE; then
+ echo -e "[ADT_INST] Error: YOCTOADT_REPO does not exist: $YOCTOADT_REPO"
+ echo -e "\n#############################################################################"
+ echo -e "# Meet error(s) when installing Yocto ADT! Please check log file for details. "
+ echo -e "#############################################################################\n"
+ exit -1
+fi
+
#firstly we need to install opkg host
install_opkg
diff --git a/meta/recipes-devtools/installer/adt-installer/adt_installer.conf b/meta/recipes-devtools/installer/adt-installer/adt_installer.conf
index b518c53..0c93237 100644
--- a/meta/recipes-devtools/installer/adt-installer/adt_installer.conf
+++ b/meta/recipes-devtools/installer/adt-installer/adt_installer.conf
@@ -23,7 +23,7 @@
# Your yocto distro repository, this should include IPKG based packages and root filesystem files where the installation is based on
-YOCTOADT_IPKG_REPO="http://adtrepo.yoctoproject.org/$YOCTOADT_VERSION/rootfs"
+YOCTOADT_REPO="http://adtrepo.yoctoproject.org/$YOCTOADT_VERSION"
# The following are for system wide setup
# Target architectures that you want to setup host cross dev environment for
--
1.7.3.4
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH 11/30] utils.bbclass: modify create_wrapper to correctly follow symlinks
2011-05-18 22:26 [PATCH 00/30] 18-May-2011 Consolidated Pull Saul Wold
` (9 preceding siblings ...)
2011-05-18 22:26 ` [PATCH 10/30] Add adt repo checking Saul Wold
@ 2011-05-18 22:26 ` Saul Wold
2011-05-19 19:26 ` Koen Kooi
2011-05-18 22:26 ` [PATCH 12/30] mklibs-native: Update to 0.1.33 Saul Wold
` (19 subsequent siblings)
30 siblings, 1 reply; 35+ messages in thread
From: Saul Wold @ 2011-05-18 22:26 UTC (permalink / raw)
To: openembedded-core
This ensures you look up the symbolic link to get the full path
Signed-off-by: Saul Wold <sgw@linux.intel.com>
---
meta/classes/utils.bbclass | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/meta/classes/utils.bbclass b/meta/classes/utils.bbclass
index 6bcaf86..1965d2f 100644
--- a/meta/classes/utils.bbclass
+++ b/meta/classes/utils.bbclass
@@ -312,7 +312,8 @@ create_wrapper () {
cmdname=`basename $cmd`.real
cat <<END >$cmd
#!/bin/sh
-exec env $@ \`dirname \$0\`/$cmdname "\$@"
+realpath=\`readlink -fn \$0\`
+exec env $@ \`dirname \$realpath\`/$cmdname "\$@"
END
chmod +x $cmd
}
--
1.7.3.4
^ permalink raw reply related [flat|nested] 35+ messages in thread* Re: [PATCH 11/30] utils.bbclass: modify create_wrapper to correctly follow symlinks
2011-05-18 22:26 ` [PATCH 11/30] utils.bbclass: modify create_wrapper to correctly follow symlinks Saul Wold
@ 2011-05-19 19:26 ` Koen Kooi
0 siblings, 0 replies; 35+ messages in thread
From: Koen Kooi @ 2011-05-19 19:26 UTC (permalink / raw)
To: Patches and discussions about the oe-core layer
RP already put this one in.
Op 19 mei 2011, om 21:19 heeft Saul Wold het volgende geschreven:
> This ensures you look up the symbolic link to get the full path
>
> Signed-off-by: Saul Wold <sgw@linux.intel.com>
> ---
> meta/classes/utils.bbclass | 3 ++-
> 1 files changed, 2 insertions(+), 1 deletions(-)
>
> diff --git a/meta/classes/utils.bbclass b/meta/classes/utils.bbclass
> index 6bcaf86..1965d2f 100644
> --- a/meta/classes/utils.bbclass
> +++ b/meta/classes/utils.bbclass
> @@ -312,7 +312,8 @@ create_wrapper () {
> cmdname=`basename $cmd`.real
> cat <<END >$cmd
> #!/bin/sh
> -exec env $@ \`dirname \$0\`/$cmdname "\$@"
> +realpath=\`readlink -fn \$0\`
> +exec env $@ \`dirname \$realpath\`/$cmdname "\$@"
> END
> chmod +x $cmd
> }
> --
> 1.7.3.4
>
>
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
^ permalink raw reply [flat|nested] 35+ messages in thread
* [PATCH 12/30] mklibs-native: Update to 0.1.33
2011-05-18 22:26 [PATCH 00/30] 18-May-2011 Consolidated Pull Saul Wold
` (10 preceding siblings ...)
2011-05-18 22:26 ` [PATCH 11/30] utils.bbclass: modify create_wrapper to correctly follow symlinks Saul Wold
@ 2011-05-18 22:26 ` Saul Wold
2011-05-18 22:26 ` [PATCH 13/30] usbutils: Update to 0.91 Saul Wold
` (18 subsequent siblings)
30 siblings, 0 replies; 35+ messages in thread
From: Saul Wold @ 2011-05-18 22:26 UTC (permalink / raw)
To: openembedded-core
Signed-off-by: Saul Wold <sgw@linux.intel.com>
---
.../mklibs/files/ac_init_fix.patch | 2 ++
.../mklibs/files/fix_STT_GNU_IFUNC.patch | 3 +++
...bs-native_0.1.31.bb => mklibs-native_0.1.33.bb} | 2 +-
3 files changed, 6 insertions(+), 1 deletions(-)
rename meta/recipes-devtools/mklibs/{mklibs-native_0.1.31.bb => mklibs-native_0.1.33.bb} (98%)
diff --git a/meta/recipes-devtools/mklibs/files/ac_init_fix.patch b/meta/recipes-devtools/mklibs/files/ac_init_fix.patch
index 7325931..422af10 100644
--- a/meta/recipes-devtools/mklibs/files/ac_init_fix.patch
+++ b/meta/recipes-devtools/mklibs/files/ac_init_fix.patch
@@ -2,6 +2,8 @@ Get the version of mklibs by simpler means. The MKLIBS_VERSION string in the
configure.ac file is replaced with real version string by the
do_configure_prepend() function from the recipe .bb file.
+Upstream-Status: Inappropriate [configuration]
+
Nitin A Kamble <nitin.a.kamble@intel.com>
Date: 2011/01/24
diff --git a/meta/recipes-devtools/mklibs/files/fix_STT_GNU_IFUNC.patch b/meta/recipes-devtools/mklibs/files/fix_STT_GNU_IFUNC.patch
index 88badde..d27a489 100644
--- a/meta/recipes-devtools/mklibs/files/fix_STT_GNU_IFUNC.patch
+++ b/meta/recipes-devtools/mklibs/files/fix_STT_GNU_IFUNC.patch
@@ -1,5 +1,8 @@
The libc6-dev in Ubuntu 9.04 is so old that the elf.h doesn't
define STT_GNU_IFUNC, so we have to define it ourselves.
+
+Upstream-Status: Inappropriate [other] - old release specific, maybe removable
+
-- Dexuan Cui (dexuan.cui@intel.com) Feb 16, 2011.
diff --git a/src/mklibs-readelf/main.cpp b/src/mklibs-readelf/main.cpp
diff --git a/meta/recipes-devtools/mklibs/mklibs-native_0.1.31.bb b/meta/recipes-devtools/mklibs/mklibs-native_0.1.33.bb
similarity index 98%
rename from meta/recipes-devtools/mklibs/mklibs-native_0.1.31.bb
rename to meta/recipes-devtools/mklibs/mklibs-native_0.1.33.bb
index 7f4afc0..cac7b91 100644
--- a/meta/recipes-devtools/mklibs/mklibs-native_0.1.31.bb
+++ b/meta/recipes-devtools/mklibs/mklibs-native_0.1.33.bb
@@ -5,7 +5,7 @@ LICENSE = "GPLv2+"
LIC_FILES_CHKSUM = "file://debian/copyright;md5=98d31037b13d896e33890738ef01af64"
DEPENDS = "python-native"
-PR = "r1"
+PR = "r0"
SRC_URI = "http://ftp.de.debian.org/debian/pool/main/m/mklibs/${BPN}_${PV}.tar.gz \
file://ac_init_fix.patch\
--
1.7.3.4
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH 13/30] usbutils: Update to 0.91
2011-05-18 22:26 [PATCH 00/30] 18-May-2011 Consolidated Pull Saul Wold
` (11 preceding siblings ...)
2011-05-18 22:26 ` [PATCH 12/30] mklibs-native: Update to 0.1.33 Saul Wold
@ 2011-05-18 22:26 ` Saul Wold
2011-05-18 22:26 ` [PATCH 14/30] qt4-tools-native: Fix the patch location Saul Wold
` (17 subsequent siblings)
30 siblings, 0 replies; 35+ messages in thread
From: Saul Wold @ 2011-05-18 22:26 UTC (permalink / raw)
To: openembedded-core
Also move the upstream location to kernel.org
Signed-off-by: Saul Wold <sgw@linux.intel.com>
---
.../{usbutils_0.86.bb => usbutils_0.91.bb} | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
rename meta/recipes-bsp/usbutils/{usbutils_0.86.bb => usbutils_0.91.bb} (91%)
diff --git a/meta/recipes-bsp/usbutils/usbutils_0.86.bb b/meta/recipes-bsp/usbutils/usbutils_0.91.bb
similarity index 91%
rename from meta/recipes-bsp/usbutils/usbutils_0.86.bb
rename to meta/recipes-bsp/usbutils/usbutils_0.91.bb
index 239de24..db04253 100644
--- a/meta/recipes-bsp/usbutils/usbutils_0.86.bb
+++ b/meta/recipes-bsp/usbutils/usbutils_0.91.bb
@@ -11,7 +11,7 @@ DEPENDS = "libusb zlib"
RDEPENDS_${PN} = "${PN}-ids"
PR = "r1"
-SRC_URI = "${SOURCEFORGE_MIRROR}/linux-usb/usbutils-${PV}.tar.gz"
+SRC_URI = "${KERNELORG_MIRROR}/linux/utils/usb/usbutils-${PV}.tar.gz"
SRC_URI[md5sum] = "34979f675d2bcb3e1b45012fa830a53f"
SRC_URI[sha256sum] = "b3b2bea6d2cd87660c8201a47071bf2a9889d8ed90c7203cc768b597799c12f4"
--
1.7.3.4
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH 14/30] qt4-tools-native: Fix the patch location
2011-05-18 22:26 [PATCH 00/30] 18-May-2011 Consolidated Pull Saul Wold
` (12 preceding siblings ...)
2011-05-18 22:26 ` [PATCH 13/30] usbutils: Update to 0.91 Saul Wold
@ 2011-05-18 22:26 ` Saul Wold
2011-05-18 22:26 ` [PATCH 15/30] create-pull-request: alphabetize arguments Saul Wold
` (16 subsequent siblings)
30 siblings, 0 replies; 35+ messages in thread
From: Saul Wold @ 2011-05-18 22:26 UTC (permalink / raw)
To: openembedded-core
Signed-off-by: Saul Wold <sgw@linux.intel.com>
---
meta/recipes-qt/qt4/qt4-tools-native_4.7.3.bb | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/meta/recipes-qt/qt4/qt4-tools-native_4.7.3.bb b/meta/recipes-qt/qt4/qt4-tools-native_4.7.3.bb
index deb4231..8d292af 100644
--- a/meta/recipes-qt/qt4/qt4-tools-native_4.7.3.bb
+++ b/meta/recipes-qt/qt4/qt4-tools-native_4.7.3.bb
@@ -1,9 +1,9 @@
require qt4-tools-native.inc
-PR = "${INC_PR}.0"
+PR = "${INC_PR}.1"
# Find the g++.conf/linux.conf in the right directory.
-FILESPATHPKG =. "qt-${PV}:"
+FILESEXTRAPATHS =. "${FILE_DIRNAME}/qt-${PV}:"
EXTRA_OECONF += " -no-fast -silent -no-rpath"
--
1.7.3.4
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH 15/30] create-pull-request: alphabetize arguments
2011-05-18 22:26 [PATCH 00/30] 18-May-2011 Consolidated Pull Saul Wold
` (13 preceding siblings ...)
2011-05-18 22:26 ` [PATCH 14/30] qt4-tools-native: Fix the patch location Saul Wold
@ 2011-05-18 22:26 ` Saul Wold
2011-05-18 22:26 ` [PATCH 16/30] create-pull-request: whitespace cleanup Saul Wold
` (15 subsequent siblings)
30 siblings, 0 replies; 35+ messages in thread
From: Saul Wold @ 2011-05-18 22:26 UTC (permalink / raw)
To: openembedded-core
From: Darren Hart <dvhart@linux.intel.com>
Some initial cleanup prior to a significant overhaul.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Cc: Otavio Salvador <otavio@ossystems.com.br>
---
scripts/create-pull-request | 10 +++++-----
1 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/scripts/create-pull-request b/scripts/create-pull-request
index 784b48c..658b9c2 100755
--- a/scripts/create-pull-request
+++ b/scripts/create-pull-request
@@ -10,14 +10,14 @@ usage() {
CMD=$(basename $0)
cat <<EOM
Usage: $CMD [-h] [-o output_dir] [-m msg_body_file] [-s subject] [-r relative_to] [-i commit_id] -b contrib_branch
+ -b contrib_branch Branch-name in the $PULL_URL
-h Display this help message
- -o output_dir Specify the output directory for the messages (default: pull-PID)
+ -i commit_id Ending commit (default: HEAD)
-m msg_body_file The file containing a blurb to be inserted into the summary email
+ -o output_dir Specify the output directory for the messages (default: pull-PID)
+ -p prefix Use [prefix N/M] instead of [PATCH N/M] as the subject prefix
-r relative_to Starting commit (default: master)
- -i commit_id Ending commit (default: HEAD)
- -b contrib_branch Branch-name in the $PULL_URL
-s subject The subject to be inserted into the summary email
- -p prefix Use [prefix N/M] instead of [PATCH N/M] as the subject prefix
Examples:
$CMD -b nitin/basic
@@ -28,7 +28,7 @@ EOM
}
# Parse and validate arguments
-while getopts "b:hi:m:o:r:s:p:" OPT; do
+while getopts "b:hi:m:o:p:r:s:" OPT; do
case $OPT in
b)
CONTRIB_BRANCH="$OPTARG"
--
1.7.3.4
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH 16/30] create-pull-request: whitespace cleanup
2011-05-18 22:26 [PATCH 00/30] 18-May-2011 Consolidated Pull Saul Wold
` (14 preceding siblings ...)
2011-05-18 22:26 ` [PATCH 15/30] create-pull-request: alphabetize arguments Saul Wold
@ 2011-05-18 22:26 ` Saul Wold
2011-05-18 22:26 ` [PATCH 17/30] create-pull-request: use git request-pull and arbitrary remotes Saul Wold
` (14 subsequent siblings)
30 siblings, 0 replies; 35+ messages in thread
From: Saul Wold @ 2011-05-18 22:26 UTC (permalink / raw)
To: openembedded-core
From: Darren Hart <dvhart@linux.intel.com>
Indent with tabs, not spaces, to be consistent with other bash scripts.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Cc: Otavio Salvador <otavio@ossystems.com.br>
---
scripts/create-pull-request | 78 +++++++++++++++++++++---------------------
1 files changed, 39 insertions(+), 39 deletions(-)
diff --git a/scripts/create-pull-request b/scripts/create-pull-request
index 658b9c2..b911a64 100755
--- a/scripts/create-pull-request
+++ b/scripts/create-pull-request
@@ -29,42 +29,42 @@ EOM
# Parse and validate arguments
while getopts "b:hi:m:o:p:r:s:" OPT; do
- case $OPT in
- b)
- CONTRIB_BRANCH="$OPTARG"
- ;;
- h)
- usage
- exit 0
- ;;
- i)
- COMMIT_ID="$OPTARG"
- ;;
- m)
- BODY="$OPTARG"
- if [ ! -e "$BODY" ]; then
- echo "ERROR: Body file does not exist"
- exit 1
- fi
- ;;
- o)
- ODIR="$OPTARG"
- ;;
- p)
- PREFIX="$OPTARG"
- ;;
- r)
- RELATIVE_TO="$OPTARG"
- ;;
- s)
- SUBJECT="$OPTARG"
- ;;
- esac
+ case $OPT in
+ b)
+ CONTRIB_BRANCH="$OPTARG"
+ ;;
+ h)
+ usage
+ exit 0
+ ;;
+ i)
+ COMMIT_ID="$OPTARG"
+ ;;
+ m)
+ BODY="$OPTARG"
+ if [ ! -e "$BODY" ]; then
+ echo "ERROR: Body file does not exist"
+ exit 1
+ fi
+ ;;
+ o)
+ ODIR="$OPTARG"
+ ;;
+ p)
+ PREFIX="$OPTARG"
+ ;;
+ r)
+ RELATIVE_TO="$OPTARG"
+ ;;
+ s)
+ SUBJECT="$OPTARG"
+ ;;
+ esac
done
if [ -z "$CONTRIB_BRANCH" ]; then
- usage
- exit 1
+ usage
+ exit 1
fi
@@ -73,9 +73,9 @@ fi
WEB_URL="$WEB_URL_PREFIX$CONTRIB_BRANCH"
wget -q $WEB_URL -O /dev/null
if [ $? -ne 0 ]; then
- echo "WARNING: Branch '$CONTRIB_BRANCH' was not found on the contrib git tree."
- echo " Please check your contrib-branch parameter before sending."
- echo ""
+ echo "WARNING: Branch '$CONTRIB_BRANCH' was not found on the contrib git tree."
+ echo " Please check your contrib-branch parameter before sending."
+ echo ""
fi
if [ -e $ODIR ]; then
@@ -107,13 +107,13 @@ EOM
# If the user specified a message body, insert it into the cover letter and
# remove the BLURB token.
if [ -n "$BODY" ]; then
- sed -i "/BLURB HERE/ r $BODY" "$CL"
- sed -i "/BLURB HERE/ d" "$CL"
+ sed -i "/BLURB HERE/ r $BODY" "$CL"
+ sed -i "/BLURB HERE/ d" "$CL"
fi
# If the user specified a subject, replace the SUBJECT token with it.
if [ -n "$SUBJECT" ]; then
- sed -i -e "s/\*\*\* SUBJECT HERE \*\*\*/$SUBJECT/" "$CL"
+ sed -i -e "s/\*\*\* SUBJECT HERE \*\*\*/$SUBJECT/" "$CL"
fi
--
1.7.3.4
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH 17/30] create-pull-request: use git request-pull and arbitrary remotes
2011-05-18 22:26 [PATCH 00/30] 18-May-2011 Consolidated Pull Saul Wold
` (15 preceding siblings ...)
2011-05-18 22:26 ` [PATCH 16/30] create-pull-request: whitespace cleanup Saul Wold
@ 2011-05-18 22:26 ` Saul Wold
2011-05-18 22:26 ` [PATCH 18/30] create-pull-request: rewrite known private URLs to public URLs Saul Wold
` (13 subsequent siblings)
30 siblings, 0 replies; 35+ messages in thread
From: Saul Wold @ 2011-05-18 22:26 UTC (permalink / raw)
To: openembedded-core; +Cc: Martin Jansa
From: Darren Hart <dvhart@linux.intel.com>
Allow for arbitrary remotes via a new -u argument. Remove the hard coded
references to the pokylinux repositories. Create the WEB_URL from known
remotes. Future patches can add additional WEB_URL mappings for remotes
like Git Hub, Gitorious, and kernel.org.
Rather than duplicating the git request-pull command ourselves, just use
the existing one.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Joshua Lock <josh@linux.intel.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Tom Rini <tom_rini@mentor.com>
Cc: Tom Rini <tom_rini@mentor.com>
Cc: Martin Jansa <martin.jansa@gmail.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Joshua Lock <josh@linux.intel.com>
---
scripts/create-pull-request | 78 ++++++++++++++++++++++++++++--------------
1 files changed, 52 insertions(+), 26 deletions(-)
diff --git a/scripts/create-pull-request b/scripts/create-pull-request
index b911a64..8f7f767 100755
--- a/scripts/create-pull-request
+++ b/scripts/create-pull-request
@@ -2,15 +2,13 @@
ODIR=pull-$$
RELATIVE_TO="master"
COMMIT_ID="HEAD"
-PULL_URL="git://git.openembedded.org/openembedded-core-contrib"
-WEB_URL_PREFIX="http://git.openembedded.org/cgit.cgi/openembedded-core-contrib/log/?h="
PREFIX="PATCH"
usage() {
CMD=$(basename $0)
cat <<EOM
-Usage: $CMD [-h] [-o output_dir] [-m msg_body_file] [-s subject] [-r relative_to] [-i commit_id] -b contrib_branch
- -b contrib_branch Branch-name in the $PULL_URL
+Usage: $CMD [-h] [-o output_dir] [-m msg_body_file] [-s subject] [-r relative_to] [-i commit_id] -u remote -b branch
+ -b branch Branch name in the specified remote
-h Display this help message
-i commit_id Ending commit (default: HEAD)
-m msg_body_file The file containing a blurb to be inserted into the summary email
@@ -18,20 +16,21 @@ Usage: $CMD [-h] [-o output_dir] [-m msg_body_file] [-s subject] [-r relative_to
-p prefix Use [prefix N/M] instead of [PATCH N/M] as the subject prefix
-r relative_to Starting commit (default: master)
-s subject The subject to be inserted into the summary email
+ -u remote The git remote where the branch is located
Examples:
- $CMD -b nitin/basic
- $CMD -r distro/master -i nitin/distro -b nitin/distro
- $CMD -r master -i misc -b nitin/misc -o pull-misc
- $CMD -p "RFC PATCH" -b nitin/experimental
+ $CMD -u contrib -b nitin/basic
+ $CMD -u contrib -r distro/master -i nitin/distro -b nitin/distro
+ $CMD -u contrib -r master -i misc -b nitin/misc -o pull-misc
+ $CMD -u contrib -p "RFC PATCH" -b nitin/experimental
EOM
}
# Parse and validate arguments
-while getopts "b:hi:m:o:p:r:s:" OPT; do
+while getopts "b:hi:m:o:p:r:s:u:" OPT; do
case $OPT in
b)
- CONTRIB_BRANCH="$OPTARG"
+ BRANCH="$OPTARG"
;;
h)
usage
@@ -59,23 +58,45 @@ while getopts "b:hi:m:o:p:r:s:" OPT; do
s)
SUBJECT="$OPTARG"
;;
+ u)
+ REMOTE="$OPTARG"
+ REMOTE_URL=$(git config remote.$REMOTE.url)
+ if [ $? -ne 0 ]; then
+ echo "ERROR: git config failed to find a url for '$REMOTE'"
+ exit 1
+ fi
+ REMOTE_REPO=$(echo $REMOTE_URL | sed "s#.*/\(.*\)#\1#")
+ # The .git suffix is optional in the URL, drop in for the REPO
+ REMOTE_REPO=${REMOTE_REPO%.git}
+ ;;
esac
done
-if [ -z "$CONTRIB_BRANCH" ]; then
+if [ -z "$BRANCH" ] || [ -z "$REMOTE_URL" ]; then
usage
exit 1
fi
+# Set WEB_URL from known remotes
+case "$REMOTE_URL" in
+ *git.yoctoproject.org*)
+ WEB_URL="http://git.yoctoproject.org/cgit.cgi/$REMOTE_REPO/log/?h=$BRANCH"
+ ;;
+ *git.pokylinux.org*)
+ WEB_URL="http://git.pokylinux.org/cgit.cgi/$REMOTE_REPO/log/?h=$BRANCH"
+ ;;
+esac
+
# Perform a sanity test on the web URL. Issue a warning if it is not
# accessible, but do not abort as users may want to run offline.
-WEB_URL="$WEB_URL_PREFIX$CONTRIB_BRANCH"
-wget -q $WEB_URL -O /dev/null
-if [ $? -ne 0 ]; then
- echo "WARNING: Branch '$CONTRIB_BRANCH' was not found on the contrib git tree."
- echo " Please check your contrib-branch parameter before sending."
- echo ""
+if [ -n "$WEB_URL" ]; then
+ wget -q $WEB_URL -O /dev/null
+ if [ $? -ne 0 ]; then
+ echo "WARNING: Branch '$BRANCH' was not found on the contrib git tree."
+ echo " Please check your remote and branch parameter before sending."
+ echo ""
+ fi
fi
if [ -e $ODIR ]; then
@@ -91,18 +112,23 @@ git format-patch -M --subject-prefix="$PREFIX" -n -o $ODIR --thread=shallow --co
# Customize the cover letter
CL="$ODIR/0000-cover-letter.patch"
-(cat <<EOM
+PM="$ODIR/pull-msg"
+git request-pull $RELATIVE_TO $REMOTE_URL $COMMIT_ID > "$PM"
+if [ $? -ne 0 ]; then
+ echo "ERROR: git request-pull reported an error"
+ exit 1
+fi
-Pull URL: $PULL_URL
- Branch: $CONTRIB_BRANCH
- Browse: $WEB_URL
+# The cover letter already has a diffstat, remove it from the pull-msg
+# before inserting it.
+sed -n "0,\#$REMOTE_URL# p" "$PM" | sed -i "/BLURB HERE/ r /dev/stdin" "$CL"
+rm "$PM"
-Thanks,
- $(git config user.name) <$(git config user.email)>
----
+# Insert the WEB_URL if there is one
+if [ -n "$WEB_URL" ]; then
+ echo " $WEB_URL" | sed -i "\#$REMOTE_URL# r /dev/stdin" "$CL"
+fi
-EOM
-) | sed -i "/BLURB HERE/ r /dev/stdin" "$CL"
# If the user specified a message body, insert it into the cover letter and
# remove the BLURB token.
--
1.7.3.4
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH 18/30] create-pull-request: rewrite known private URLs to public URLs
2011-05-18 22:26 [PATCH 00/30] 18-May-2011 Consolidated Pull Saul Wold
` (16 preceding siblings ...)
2011-05-18 22:26 ` [PATCH 17/30] create-pull-request: use git request-pull and arbitrary remotes Saul Wold
@ 2011-05-18 22:26 ` Saul Wold
2011-05-18 22:26 ` [PATCH 19/30] create-pull-request: provide an RFC mode via -c argument Saul Wold
` (12 subsequent siblings)
30 siblings, 0 replies; 35+ messages in thread
From: Saul Wold @ 2011-05-18 22:26 UTC (permalink / raw)
To: openembedded-core; +Cc: Martin Jansa
From: Darren Hart <dvhart@linux.intel.com>
Rather than requiring users to have public remotes and private remotes when
their development remotes are ssh based (and therefor unsuitable for a pull
request URL), rewrite the ones we know about from ssh://git@ to git://.
As the remote url vary from remote to remote, do the REMOTE_REPO regex per
remote.
With this infrastructure in place, future patches can augment the list of
known remotes for things like Git Hub, Gitorious, kernel.org, etc.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Joshua Lock <josh@linux.intel.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Tom Rini <tom_rini@mentor.com>
Cc: Tom Rini <tom_rini@mentor.com>
Cc: Martin Jansa <martin.jansa@gmail.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Joshua Lock <josh@linux.intel.com>
---
scripts/create-pull-request | 14 +++++++++++++-
1 files changed, 13 insertions(+), 1 deletions(-)
diff --git a/scripts/create-pull-request b/scripts/create-pull-request
index 8f7f767..429421b 100755
--- a/scripts/create-pull-request
+++ b/scripts/create-pull-request
@@ -65,7 +65,19 @@ while getopts "b:hi:m:o:p:r:s:u:" OPT; do
echo "ERROR: git config failed to find a url for '$REMOTE'"
exit 1
fi
- REMOTE_REPO=$(echo $REMOTE_URL | sed "s#.*/\(.*\)#\1#")
+
+ # Rewrite known private URLs to public URLs
+ # Determine the repository name for use in the WEB_URL later
+ case "$REMOTE_URL" in
+ ssh://git@git.pokylinux.org*)
+ REMOTE_REPO=$(echo $REMOTE_URL | sed "s#.*/\(.*\)#\1#")
+ REMOTE_URL=${REMOTE_URL/'ssh://git@'/'git://'}
+ ;;
+ ssh://git@git.yoctoproject.org*)
+ REMOTE_REPO=$(echo $REMOTE_URL | sed "s#.*/\(.*\)#\1#")
+ REMOTE_URL=${REMOTE_URL/"ssh://git@"/"git://"}
+ ;;
+ esac
# The .git suffix is optional in the URL, drop in for the REPO
REMOTE_REPO=${REMOTE_REPO%.git}
;;
--
1.7.3.4
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH 19/30] create-pull-request: provide an RFC mode via -c argument
2011-05-18 22:26 [PATCH 00/30] 18-May-2011 Consolidated Pull Saul Wold
` (17 preceding siblings ...)
2011-05-18 22:26 ` [PATCH 18/30] create-pull-request: rewrite known private URLs to public URLs Saul Wold
@ 2011-05-18 22:26 ` Saul Wold
2011-05-18 22:26 ` [PATCH 20/30] send-pull-request: whitespace cleanup Saul Wold
` (11 subsequent siblings)
30 siblings, 0 replies; 35+ messages in thread
From: Saul Wold @ 2011-05-18 22:26 UTC (permalink / raw)
To: openembedded-core; +Cc: Paul Eggleton
From: Darren Hart <dvhart@linux.intel.com>
Currently it is difficult to know if a pull request is being sent for review
or just to be pulled.
Add a -c argument to add RFC to the subject prefix and a blurb requesting
review to the cover letter.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Joshua Lock <josh@linux.intel.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Saul Wold <sgw@linux.intel.com>
Cc: Paul Eggleton <paul.eggleton@intel.com>
Cc: Joshua Lock <josh@linux.intel.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
---
scripts/create-pull-request | 24 ++++++++++++++++++++++--
1 files changed, 22 insertions(+), 2 deletions(-)
diff --git a/scripts/create-pull-request b/scripts/create-pull-request
index 429421b..202d99d 100755
--- a/scripts/create-pull-request
+++ b/scripts/create-pull-request
@@ -3,12 +3,14 @@ ODIR=pull-$$
RELATIVE_TO="master"
COMMIT_ID="HEAD"
PREFIX="PATCH"
+RFC=0
usage() {
CMD=$(basename $0)
cat <<EOM
Usage: $CMD [-h] [-o output_dir] [-m msg_body_file] [-s subject] [-r relative_to] [-i commit_id] -u remote -b branch
-b branch Branch name in the specified remote
+ -c Create an RFC (Request for Comment) patch series
-h Display this help message
-i commit_id Ending commit (default: HEAD)
-m msg_body_file The file containing a blurb to be inserted into the summary email
@@ -27,11 +29,14 @@ EOM
}
# Parse and validate arguments
-while getopts "b:hi:m:o:p:r:s:u:" OPT; do
+while getopts "b:chi:m:o:p:r:s:u:" OPT; do
case $OPT in
b)
BRANCH="$OPTARG"
;;
+ c)
+ RFC=1
+ ;;
h)
usage
exit 0
@@ -89,6 +94,10 @@ if [ -z "$BRANCH" ] || [ -z "$REMOTE_URL" ]; then
exit 1
fi
+if [ $RFC -eq 1 ]; then
+ PREFIX="RFC $PREFIX"
+fi
+
# Set WEB_URL from known remotes
case "$REMOTE_URL" in
@@ -125,7 +134,7 @@ git format-patch -M --subject-prefix="$PREFIX" -n -o $ODIR --thread=shallow --co
# Customize the cover letter
CL="$ODIR/0000-cover-letter.patch"
PM="$ODIR/pull-msg"
-git request-pull $RELATIVE_TO $REMOTE_URL $COMMIT_ID > "$PM"
+git request-pull $RELATIVE_TO $REMOTE_URL $COMMIT_ID >> "$PM"
if [ $? -ne 0 ]; then
echo "ERROR: git request-pull reported an error"
exit 1
@@ -136,6 +145,17 @@ fi
sed -n "0,\#$REMOTE_URL# p" "$PM" | sed -i "/BLURB HERE/ r /dev/stdin" "$CL"
rm "$PM"
+# If this is an RFC, make that clear in the cover letter
+if [ $RFC -eq 1 ]; then
+(cat <<EOM
+Please review the following changes for suitability for inclusion. If you have
+any objections or suggestions for improvement, please respond to the patches. If
+you agree with the changes, please provide your Acked-by.
+
+EOM
+) | sed -i "/BLURB HERE/ r /dev/stdin" "$CL"
+fi
+
# Insert the WEB_URL if there is one
if [ -n "$WEB_URL" ]; then
echo " $WEB_URL" | sed -i "\#$REMOTE_URL# r /dev/stdin" "$CL"
--
1.7.3.4
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH 20/30] send-pull-request: whitespace cleanup
2011-05-18 22:26 [PATCH 00/30] 18-May-2011 Consolidated Pull Saul Wold
` (18 preceding siblings ...)
2011-05-18 22:26 ` [PATCH 19/30] create-pull-request: provide an RFC mode via -c argument Saul Wold
@ 2011-05-18 22:26 ` Saul Wold
2011-05-18 22:26 ` [PATCH 21/30] send-pull-request: remove local mta support Saul Wold
` (10 subsequent siblings)
30 siblings, 0 replies; 35+ messages in thread
From: Saul Wold @ 2011-05-18 22:26 UTC (permalink / raw)
To: openembedded-core
From: Darren Hart <dvhart@linux.intel.com>
Indent with tabs, not spaces, for consistency with other bash scripts.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Cc: Otavio Salvador <otavio@ossystems.com.br>
---
scripts/send-pull-request | 250 ++++++++++++++++++++++----------------------
1 files changed, 125 insertions(+), 125 deletions(-)
diff --git a/scripts/send-pull-request b/scripts/send-pull-request
index 3af2a9f..76dd7a2d 100755
--- a/scripts/send-pull-request
+++ b/scripts/send-pull-request
@@ -31,72 +31,72 @@ EOM
# $2: The regex to match and strip from the line with email addresses
harvest_recipients()
{
- TO_CC=$1
- REGX=$2
- export IFS=$',\n'
- for PATCH in $PDIR/*.patch; do
- # Grab To addresses
- for EMAIL in $(sed '/^---$/q' $PATCH | grep -e "$REGX" | sed "s/$REGX//"); do
- if [ "$TO_CC" == "TO" ] && [ "${TO/$EMAIL/}" == "$TO" ] && [ -n "$EMAIL" ]; then
- if [ -z "$TO" ]; then TO=$EMAIL; else TO="$TO,$EMAIL"; fi
- elif [ "$TO_CC" == "CC" ] && [ "${CC/$EMAIL/}" == "$CC" ] && [ -n "$EMAIL" ]; then
- if [ -z "$CC" ]; then CC=$EMAIL; else CC="$CC,$EMAIL"; fi
- fi
- done
- done
- unset IFS
+ TO_CC=$1
+ REGX=$2
+ export IFS=$',\n'
+ for PATCH in $PDIR/*.patch; do
+ # Grab To addresses
+ for EMAIL in $(sed '/^---$/q' $PATCH | grep -e "$REGX" | sed "s/$REGX//"); do
+ if [ "$TO_CC" == "TO" ] && [ "${TO/$EMAIL/}" == "$TO" ] && [ -n "$EMAIL" ]; then
+ if [ -z "$TO" ]; then TO=$EMAIL; else TO="$TO,$EMAIL"; fi
+ elif [ "$TO_CC" == "CC" ] && [ "${CC/$EMAIL/}" == "$CC" ] && [ -n "$EMAIL" ]; then
+ if [ -z "$CC" ]; then CC=$EMAIL; else CC="$CC,$EMAIL"; fi
+ fi
+ done
+ done
+ unset IFS
}
# Parse and verify arguments
while getopts "af:ghp:t:" OPT; do
- case $OPT in
- a)
- AUTO=1
- ;;
- f)
- FROM="$OPTARG"
- ;;
- g)
- PULL_MTA="git"
- ;;
- h)
- usage
- exit 0
- ;;
- p)
- PDIR=${OPTARG%/}
- if [ ! -d $PDIR ]; then
- echo "ERROR: pull-dir \"$PDIR\" does not exist."
- usage
- exit 1
- fi
- ;;
- t)
- if [ -n "$TO" ]; then
- TO="$TO,$OPTARG"
- else
- TO="$OPTARG"
- fi
- ;;
- esac
+ case $OPT in
+ a)
+ AUTO=1
+ ;;
+ f)
+ FROM="$OPTARG"
+ ;;
+ g)
+ PULL_MTA="git"
+ ;;
+ h)
+ usage
+ exit 0
+ ;;
+ p)
+ PDIR=${OPTARG%/}
+ if [ ! -d $PDIR ]; then
+ echo "ERROR: pull-dir \"$PDIR\" does not exist."
+ usage
+ exit 1
+ fi
+ ;;
+ t)
+ if [ -n "$TO" ]; then
+ TO="$TO,$OPTARG"
+ else
+ TO="$OPTARG"
+ fi
+ ;;
+ esac
done
if [ -z "$PDIR" ]; then
- echo "ERROR: you must specify a pull-dir."
- usage
- exit 1
+ echo "ERROR: you must specify a pull-dir."
+ usage
+ exit 1
fi
# Verify the cover letter is complete and free of tokens
CL="$PDIR/0000-cover-letter.patch"
for TOKEN in SUBJECT BLURB; do
- grep -q "*** $TOKEN HERE ***" "$CL"
- if [ $? -eq 0 ]; then
- echo "ERROR: Please edit $CL and try again (Look for '*** $TOKEN HERE ***')."
- exit 1
- fi
+ grep -q "*** $TOKEN HERE ***" "$CL"
+ if [ $? -eq 0 ]; then
+ echo "ERROR: Please edit $CL and try again (Look for '*** $TOKEN HERE ***')."
+ exit 1
+ fi
done
@@ -104,39 +104,39 @@ done
# In addition to To and CC headers/lines, the common Signed-off-by, Tested-by,
# etc. (*-by) will be added to CC.
if [ $AUTO -eq 1 ]; then
- harvest_recipients TO "^[Tt][Oo]: *"
- harvest_recipients CC "^[Cc][Cc]: *"
- harvest_recipients CC "^.*-[Bb][Yy]: *"
+ harvest_recipients TO "^[Tt][Oo]: *"
+ harvest_recipients CC "^[Cc][Cc]: *"
+ harvest_recipients CC "^.*-[Bb][Yy]: *"
fi
case "$PULL_MTA" in
- git)
- FROM="$(git config sendemail.from)"
+git)
+ FROM="$(git config sendemail.from)"
AUTO_TO="$(git config sendemail.to)"
if [ -n "$AUTO_TO" ]; then
- if [ -n "$TO" ]; then
- TO="$TO,$AUTO_TO"
- else
- TO="$AUTO_TO"
- fi
+ if [ -n "$TO" ]; then
+ TO="$TO,$AUTO_TO"
+ else
+ TO="$AUTO_TO"
+ fi
+ fi
+ ;;
+sendmail)
+ if [ -z "$FROM" ]; then
+ FROM="$(git config user.name) <$(git config user.email)>"
+ if [ -z "$FROM" ]; then
+ echo "ERROR: unable to determine a FROM address"
+ usage
+ exit 1
+ fi
fi
- ;;
- sendmail)
- if [ -z "$FROM" ]; then
- FROM="$(git config user.name) <$(git config user.email)>"
- if [ -z "$FROM" ]; then
- echo "ERROR: unable to determine a FROM address"
- usage
- exit 1
- fi
- fi
- ;;
+ ;;
esac
if [ -z "$TO" ] && [ -z "$CC" ]; then
- echo "ERROR: you have not specified any recipients."
- usage
- exit 1
+ echo "ERROR: you have not specified any recipients."
+ usage
+ exit 1
fi
@@ -155,55 +155,55 @@ echo "Continue? [y/N] "
read cont
if [ "$cont" == "y" ] || [ "$cont" == "Y" ]; then
- ERROR=0
- case "$PULL_MTA" in
- git)
- export IFS=$','
- GIT_TO=$(for R in $TO; do echo -n "--to='$R' "; done)
- GIT_CC=$(for R in $CC; do echo -n "--cc='$R' "; done)
- unset IFS
- for PATCH in $PDIR/*patch; do
- # We harvest the emails manually, so force git not to.
- eval "git send-email $GIT_TO $GIT_CC --no-chain-reply-to --suppress-cc=all $PATCH"
- if [ $? -eq 1 ]; then
- ERROR=1
- fi
- done
- ;;
- sendmail)
- for PATCH in $PDIR/*patch; do
- # Insert To and CC headers via formail to keep them separate and
- # appending them to the sendmail command as -- $TO $CC has
- # proven to be an exercise in futility.
- #
- # Clear the From header, leaving it up to sendmail to insert an
- # appropriate one. Insert the original sender (per git) into the
- # body of the message.
- #
- # Use tail to remove the email envelope from git or formail as
- # msmtp (sendmail) would choke on them.
- #
- # Modify the patch date for sequential delivery, but retain the
- # original date as "Old-Date".
- DATE=$(date +"%a, %d %b %Y %k:%M:%S %z")
- GIT_FROM=$(cat $PATCH | formail -X "From:")
- cat $PATCH | formail -I "To: $TO" -I "CC: $CC" -I "From: $FROM" -i "Date: $DATE" | sed "0,/^$/s/^$/\n$GIT_FROM\n/" | tail -n +2 | sendmail -t
- if [ $? -eq 1 ]; then
- ERROR=1
- fi
- done
- ;;
- *)
- echo "ERROR: unknown MTA: $PULL_MTA"
- usage
- exit 1
- ;;
- esac
-
- if [ $ERROR -eq 1 ]; then
- echo "ERROR: Failed to send one or more messages. Check your MTA log for details."
- fi
+ ERROR=0
+ case "$PULL_MTA" in
+ git)
+ export IFS=$','
+ GIT_TO=$(for R in $TO; do echo -n "--to='$R' "; done)
+ GIT_CC=$(for R in $CC; do echo -n "--cc='$R' "; done)
+ unset IFS
+ for PATCH in $PDIR/*patch; do
+ # We harvest the emails manually, so force git not to.
+ eval "git send-email $GIT_TO $GIT_CC --no-chain-reply-to --suppress-cc=all $PATCH"
+ if [ $? -eq 1 ]; then
+ ERROR=1
+ fi
+ done
+ ;;
+ sendmail)
+ for PATCH in $PDIR/*patch; do
+ # Insert To and CC headers via formail to keep them separate and
+ # appending them to the sendmail command as -- $TO $CC has
+ # proven to be an exercise in futility.
+ #
+ # Clear the From header, leaving it up to sendmail to insert an
+ # appropriate one. Insert the original sender (per git) into the
+ # body of the message.
+ #
+ # Use tail to remove the email envelope from git or formail as
+ # msmtp (sendmail) would choke on them.
+ #
+ # Modify the patch date for sequential delivery, but retain the
+ # original date as "Old-Date".
+ DATE=$(date +"%a, %d %b %Y %k:%M:%S %z")
+ GIT_FROM=$(cat $PATCH | formail -X "From:")
+ cat $PATCH | formail -I "To: $TO" -I "CC: $CC" -I "From: $FROM" -i "Date: $DATE" | sed "0,/^$/s/^$/\n$GIT_FROM\n/" | tail -n +2 | sendmail -t
+ if [ $? -eq 1 ]; then
+ ERROR=1
+ fi
+ done
+ ;;
+ *)
+ echo "ERROR: unknown MTA: $PULL_MTA"
+ usage
+ exit 1
+ ;;
+ esac
+
+ if [ $ERROR -eq 1 ]; then
+ echo "ERROR: Failed to send one or more messages. Check your MTA log for details."
+ fi
else
- echo "Send aborted."
+ echo "Send aborted."
fi
--
1.7.3.4
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH 21/30] send-pull-request: remove local mta support
2011-05-18 22:26 [PATCH 00/30] 18-May-2011 Consolidated Pull Saul Wold
` (19 preceding siblings ...)
2011-05-18 22:26 ` [PATCH 20/30] send-pull-request: whitespace cleanup Saul Wold
@ 2011-05-18 22:26 ` Saul Wold
2011-05-18 22:26 ` [PATCH 22/30] send-pull-request: fix greedy auto-cc regex Saul Wold
` (9 subsequent siblings)
30 siblings, 0 replies; 35+ messages in thread
From: Saul Wold @ 2011-05-18 22:26 UTC (permalink / raw)
To: openembedded-core
From: Darren Hart <dvhart@linux.intel.com>
There is no real value in supporting sendmail directly when git
can be configured to use it. The script used to generate the
pull request mails relies heavily on git, so doing so here does
not impose any additional dependencies and it greatly reduces the
complexity of this script.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Cc: Otavio Salvador <otavio@ossystems.com.br>
---
scripts/send-pull-request | 108 +++++++++------------------------------------
1 files changed, 21 insertions(+), 87 deletions(-)
diff --git a/scripts/send-pull-request b/scripts/send-pull-request
index 76dd7a2d..d265c47 100755
--- a/scripts/send-pull-request
+++ b/scripts/send-pull-request
@@ -1,15 +1,9 @@
#!/bin/bash
AUTO=0
-# Check env for any default settings, command line options will override these.
-if [ -z "$PULL_MTA" ]; then
- PULL_MTA="sendmail"
-fi
-
# Prevent environment leakage to these vars.
unset TO
unset CC
-# allow the user to set FROM in the environment
usage()
{
@@ -18,10 +12,6 @@ Usage: $(basename $0) [-h] [-a] [[-t email]...] -p pull-dir
-t email Explicitly add email to the recipients
-a Automatically harvest recipients from "*-by: email" lines
in the patches in the pull-dir
- -f Specify a FROM address, you can also use the FROM environment
- variable. If you do not specify one, it will try to use the one
- from your git config. This is ignored if -g is used.
- -g Use git-send-email to send mail instead of sendmail
-p pull-dir Directory containing summary and patch files
EOM
}
@@ -49,17 +39,11 @@ harvest_recipients()
# Parse and verify arguments
-while getopts "af:ghp:t:" OPT; do
+while getopts "ahp:t:" OPT; do
case $OPT in
a)
AUTO=1
;;
- f)
- FROM="$OPTARG"
- ;;
- g)
- PULL_MTA="git"
- ;;
h)
usage
exit 0
@@ -109,29 +93,14 @@ if [ $AUTO -eq 1 ]; then
harvest_recipients CC "^.*-[Bb][Yy]: *"
fi
-case "$PULL_MTA" in
-git)
- FROM="$(git config sendemail.from)"
- AUTO_TO="$(git config sendemail.to)"
- if [ -n "$AUTO_TO" ]; then
- if [ -n "$TO" ]; then
- TO="$TO,$AUTO_TO"
- else
- TO="$AUTO_TO"
- fi
+AUTO_TO="$(git config sendemail.to)"
+if [ -n "$AUTO_TO" ]; then
+ if [ -n "$TO" ]; then
+ TO="$TO,$AUTO_TO"
+ else
+ TO="$AUTO_TO"
fi
- ;;
-sendmail)
- if [ -z "$FROM" ]; then
- FROM="$(git config user.name) <$(git config user.email)>"
- if [ -z "$FROM" ]; then
- echo "ERROR: unable to determine a FROM address"
- usage
- exit 1
- fi
- fi
- ;;
-esac
+fi
if [ -z "$TO" ] && [ -z "$CC" ]; then
echo "ERROR: you have not specified any recipients."
@@ -145,10 +114,7 @@ cat <<EOM
The following patches:
$(for PATCH in $PDIR/*.patch; do echo " $PATCH"; done)
-will be sent with the following headers:
- From: $FROM
- To: $TO
- CC: $CC
+will now be sent via the git send-email command.
EOM
echo "Continue? [y/N] "
@@ -156,52 +122,20 @@ read cont
if [ "$cont" == "y" ] || [ "$cont" == "Y" ]; then
ERROR=0
- case "$PULL_MTA" in
- git)
- export IFS=$','
- GIT_TO=$(for R in $TO; do echo -n "--to='$R' "; done)
- GIT_CC=$(for R in $CC; do echo -n "--cc='$R' "; done)
- unset IFS
- for PATCH in $PDIR/*patch; do
- # We harvest the emails manually, so force git not to.
- eval "git send-email $GIT_TO $GIT_CC --no-chain-reply-to --suppress-cc=all $PATCH"
- if [ $? -eq 1 ]; then
- ERROR=1
- fi
- done
- ;;
- sendmail)
- for PATCH in $PDIR/*patch; do
- # Insert To and CC headers via formail to keep them separate and
- # appending them to the sendmail command as -- $TO $CC has
- # proven to be an exercise in futility.
- #
- # Clear the From header, leaving it up to sendmail to insert an
- # appropriate one. Insert the original sender (per git) into the
- # body of the message.
- #
- # Use tail to remove the email envelope from git or formail as
- # msmtp (sendmail) would choke on them.
- #
- # Modify the patch date for sequential delivery, but retain the
- # original date as "Old-Date".
- DATE=$(date +"%a, %d %b %Y %k:%M:%S %z")
- GIT_FROM=$(cat $PATCH | formail -X "From:")
- cat $PATCH | formail -I "To: $TO" -I "CC: $CC" -I "From: $FROM" -i "Date: $DATE" | sed "0,/^$/s/^$/\n$GIT_FROM\n/" | tail -n +2 | sendmail -t
- if [ $? -eq 1 ]; then
- ERROR=1
- fi
- done
- ;;
- *)
- echo "ERROR: unknown MTA: $PULL_MTA"
- usage
- exit 1
- ;;
- esac
+ export IFS=$','
+ GIT_TO=$(for R in $TO; do echo -n "--to='$R' "; done)
+ GIT_CC=$(for R in $CC; do echo -n "--cc='$R' "; done)
+ unset IFS
+ for PATCH in $PDIR/*patch; do
+ # We harvest the emails manually, so force git not to.
+ eval "git send-email $GIT_TO $GIT_CC --no-chain-reply-to --suppress-cc=all $PATCH"
+ if [ $? -eq 1 ]; then
+ ERROR=1
+ fi
+ done
if [ $ERROR -eq 1 ]; then
- echo "ERROR: Failed to send one or more messages. Check your MTA log for details."
+ echo "ERROR: Failed to send one or more messages."
fi
else
echo "Send aborted."
--
1.7.3.4
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH 22/30] send-pull-request: fix greedy auto-cc regex
2011-05-18 22:26 [PATCH 00/30] 18-May-2011 Consolidated Pull Saul Wold
` (20 preceding siblings ...)
2011-05-18 22:26 ` [PATCH 21/30] send-pull-request: remove local mta support Saul Wold
@ 2011-05-18 22:26 ` Saul Wold
2011-05-18 22:26 ` [PATCH 23/30] send-pull-request: don't send all patches to everyone even with -a Saul Wold
` (8 subsequent siblings)
30 siblings, 0 replies; 35+ messages in thread
From: Saul Wold @ 2011-05-18 22:26 UTC (permalink / raw)
To: openembedded-core
From: Darren Hart <dvhart@linux.intel.com>
A greedy regular expression caused emails to be harvested from patches
that were quoted in the commit message. Ensure only tags that start at the
beginning of the line are considered for harvesting.
NOTE: users are still responsible for verifying the recipients list and to
ensure they do not spam people!
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Saul Wold <sgw@linux.intel.com>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
---
scripts/send-pull-request | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/scripts/send-pull-request b/scripts/send-pull-request
index d265c47..b294d35 100755
--- a/scripts/send-pull-request
+++ b/scripts/send-pull-request
@@ -90,7 +90,7 @@ done
if [ $AUTO -eq 1 ]; then
harvest_recipients TO "^[Tt][Oo]: *"
harvest_recipients CC "^[Cc][Cc]: *"
- harvest_recipients CC "^.*-[Bb][Yy]: *"
+ harvest_recipients CC "^[A-Z][A-Za-z-]*-[Bb][Yy]: *"
fi
AUTO_TO="$(git config sendemail.to)"
--
1.7.3.4
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH 23/30] send-pull-request: don't send all patches to everyone even with -a
2011-05-18 22:26 [PATCH 00/30] 18-May-2011 Consolidated Pull Saul Wold
` (21 preceding siblings ...)
2011-05-18 22:26 ` [PATCH 22/30] send-pull-request: fix greedy auto-cc regex Saul Wold
@ 2011-05-18 22:26 ` Saul Wold
2011-05-18 22:26 ` [PATCH 24/30] send-pull-request: verify git sendemail config Saul Wold
` (7 subsequent siblings)
30 siblings, 0 replies; 35+ messages in thread
From: Saul Wold @ 2011-05-18 22:26 UTC (permalink / raw)
To: openembedded-core; +Cc: Koen Kooi
From: Darren Hart <dvhart@linux.intel.com>
Rather than sending every patch to every recipient of the entire series when
-a is used, only send the cover letter to everyone and use git's
--signed-off-by-cc feature to generate an auto cc list for the individual
patches.
Add a -c option to use --signed-off-by-cc to auto cc recipeients at the
individual patch level. This is implied by -a.
Using git to harvest the Cc list means only collecting Signed-off-by and Cc
lines, rather than the more generic *-by lines previously. This is a fair
trade-off for significantly reduced complexity. If users want to add Acked-by
and Tested-by lines and want to use the -a feature, they should include those
recipients as Cc lines as well.
Now that we rely on git for auto-cc for the individual patches,
make sure the user is prompted before sending each patch by forcing
--confirm=always.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Cc: Khem Raj <raj.khem@gmail.com>
Cc: Koen Kooi <koen@dominion.thruhere.net>
Cc: Otavio Salvador <otavio@ossystems.com.br>
---
scripts/send-pull-request | 75 ++++++++++++++++++++++++++++-----------------
1 files changed, 47 insertions(+), 28 deletions(-)
diff --git a/scripts/send-pull-request b/scripts/send-pull-request
index b294d35..5a11d1f 100755
--- a/scripts/send-pull-request
+++ b/scripts/send-pull-request
@@ -1,36 +1,40 @@
#!/bin/bash
AUTO=0
+AUTO_CL=0
# Prevent environment leakage to these vars.
unset TO
unset CC
+unset AUTO_CC
usage()
{
cat <<EOM
-Usage: $(basename $0) [-h] [-a] [[-t email]...] -p pull-dir
- -t email Explicitly add email to the recipients
- -a Automatically harvest recipients from "*-by: email" lines
- in the patches in the pull-dir
+Usage: $(basename $0) [-h] [-a] [-c] [[-t email]...] -p pull-dir
+ -a Send the cover letter to every recipient listed in Cc and
+ Signed-off-by lines found in the cover letter and the patches.
+ This option implies -c.
+ -c Expand the Cc list for the individual patches using the Cc and
+ Signed-off-by lines from the same patch.
-p pull-dir Directory containing summary and patch files
+ -t email Explicitly add email to the recipients
EOM
}
-# Collect To and CC addresses from the patch files if they exist
-# $1: Which header to add the recipients to, "TO" or "CC"
-# $2: The regex to match and strip from the line with email addresses
+# Collect addresses from a patch into AUTO_CC
+# $1: a patch file
harvest_recipients()
{
- TO_CC=$1
- REGX=$2
+ PATCH=$1
export IFS=$',\n'
- for PATCH in $PDIR/*.patch; do
- # Grab To addresses
+ for REGX in "^[Cc][Cc]: *" "^[Ss]igned-[Oo]ff-[Bb]y: *"; do
for EMAIL in $(sed '/^---$/q' $PATCH | grep -e "$REGX" | sed "s/$REGX//"); do
- if [ "$TO_CC" == "TO" ] && [ "${TO/$EMAIL/}" == "$TO" ] && [ -n "$EMAIL" ]; then
- if [ -z "$TO" ]; then TO=$EMAIL; else TO="$TO,$EMAIL"; fi
- elif [ "$TO_CC" == "CC" ] && [ "${CC/$EMAIL/}" == "$CC" ] && [ -n "$EMAIL" ]; then
- if [ -z "$CC" ]; then CC=$EMAIL; else CC="$CC,$EMAIL"; fi
+ if [ "${AUTO_CC/$EMAIL/}" == "$AUTO_CC" ] && [ -n "$EMAIL" ]; then
+ if [ -z "$AUTO_CC" ]; then
+ AUTO_CC=$EMAIL;
+ else
+ AUTO_CC="$AUTO_CC,$EMAIL";
+ fi
fi
done
done
@@ -39,9 +43,13 @@ harvest_recipients()
# Parse and verify arguments
-while getopts "ahp:t:" OPT; do
+while getopts "achp:t:" OPT; do
case $OPT in
a)
+ AUTO_CL=1
+ AUTO=1
+ ;;
+ c)
AUTO=1
;;
h)
@@ -84,13 +92,11 @@ for TOKEN in SUBJECT BLURB; do
done
-# Harvest emails from the generated patches and populate the TO and CC variables
-# In addition to To and CC headers/lines, the common Signed-off-by, Tested-by,
-# etc. (*-by) will be added to CC.
-if [ $AUTO -eq 1 ]; then
- harvest_recipients TO "^[Tt][Oo]: *"
- harvest_recipients CC "^[Cc][Cc]: *"
- harvest_recipients CC "^[A-Z][A-Za-z-]*-[Bb][Yy]: *"
+# Harvest emails from the generated patches and populate AUTO_CC.
+if [ $AUTO_CL -eq 1 ]; then
+ for PATCH in $PDIR/*.patch; do
+ harvest_recipients $PATCH
+ done
fi
AUTO_TO="$(git config sendemail.to)"
@@ -102,7 +108,7 @@ if [ -n "$AUTO_TO" ]; then
fi
fi
-if [ -z "$TO" ] && [ -z "$CC" ]; then
+if [ -z "$TO" ] && [ -z "$AUTO_CC" ]; then
echo "ERROR: you have not specified any recipients."
usage
exit 1
@@ -114,7 +120,8 @@ cat <<EOM
The following patches:
$(for PATCH in $PDIR/*.patch; do echo " $PATCH"; done)
-will now be sent via the git send-email command.
+will now be sent via the git send-email command. Git will prompt you before
+sending any email.
EOM
echo "Continue? [y/N] "
@@ -124,11 +131,23 @@ if [ "$cont" == "y" ] || [ "$cont" == "Y" ]; then
ERROR=0
export IFS=$','
GIT_TO=$(for R in $TO; do echo -n "--to='$R' "; done)
- GIT_CC=$(for R in $CC; do echo -n "--cc='$R' "; done)
+ GIT_CC=$(for R in $AUTO_CC; do echo -n "--cc='$R' "; done)
unset IFS
for PATCH in $PDIR/*patch; do
- # We harvest the emails manually, so force git not to.
- eval "git send-email $GIT_TO $GIT_CC --no-chain-reply-to --suppress-cc=all $PATCH"
+ if [ $AUTO -eq 1 ]; then
+ if [ $PATCH == "$CL" ] && [ $AUTO_CL -eq 1 ]; then
+ # Send the cover letter to every recipient, both
+ # specified as well as harvested.
+ eval "git send-email $GIT_TO $GIT_CC --confirm=always --no-chain-reply-to --suppress-cc=all $PATCH"
+ else
+ # Send the patch to the specified recipients and
+ # those git finds in this specific patch.
+ eval "git send-email $GIT_TO --confirm=always --no-chain-reply-to --signed-off-by-cc $PATCH"
+ fi
+ else
+ # Only send to the explicitly specified recipients
+ eval "git send-email $GIT_TO --confirm=always --no-chain-reply-to --suppress-cc=all $PATCH"
+ fi
if [ $? -eq 1 ]; then
ERROR=1
fi
--
1.7.3.4
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH 24/30] send-pull-request: verify git sendemail config
2011-05-18 22:26 [PATCH 00/30] 18-May-2011 Consolidated Pull Saul Wold
` (22 preceding siblings ...)
2011-05-18 22:26 ` [PATCH 23/30] send-pull-request: don't send all patches to everyone even with -a Saul Wold
@ 2011-05-18 22:26 ` Saul Wold
2011-05-18 22:26 ` [PATCH 25/30] create-pull-request: do not check certificate Saul Wold
` (6 subsequent siblings)
30 siblings, 0 replies; 35+ messages in thread
From: Saul Wold @ 2011-05-18 22:26 UTC (permalink / raw)
To: openembedded-core
From: Darren Hart <dvhart@linux.intel.com>
Perform a quick sanity check to be able to direct users to configure
git.sendemail if they haven't yet.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Cc: Otavio Salvador <otavio@ossystems.com.br>
---
scripts/send-pull-request | 15 +++++++++++++++
1 files changed, 15 insertions(+), 0 deletions(-)
diff --git a/scripts/send-pull-request b/scripts/send-pull-request
index 5a11d1f..21eb302 100755
--- a/scripts/send-pull-request
+++ b/scripts/send-pull-request
@@ -41,6 +41,18 @@ harvest_recipients()
unset IFS
}
+check_git_sendemail_config()
+{
+ GIT_SMTP=$(git config sendemail.smtpserver)
+ GIT_FROM=$(git config sendemail.from)
+ if [ -z "$GIT_SMTP" ] || [ -z "$GIT_FROM" ]; then
+ echo "ERROR: git sendemail is not configured."
+ echo "Please read GIT-SEND-EMAIL(1) and configure:"
+ echo " sendemail.smtpserver"
+ echo " sendemail.from"
+ exit 1
+ fi
+}
# Parse and verify arguments
while getopts "achp:t:" OPT; do
@@ -74,6 +86,9 @@ while getopts "achp:t:" OPT; do
esac
done
+# Abort early if git-send-email is not properly configured
+check_git_sendemail_config
+
if [ -z "$PDIR" ]; then
echo "ERROR: you must specify a pull-dir."
usage
--
1.7.3.4
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH 25/30] create-pull-request: do not check certificate
2011-05-18 22:26 [PATCH 00/30] 18-May-2011 Consolidated Pull Saul Wold
` (23 preceding siblings ...)
2011-05-18 22:26 ` [PATCH 24/30] send-pull-request: verify git sendemail config Saul Wold
@ 2011-05-18 22:26 ` Saul Wold
2011-05-18 22:26 ` [PATCH 26/30] create-pull-request: add GitHub remote support Saul Wold
` (5 subsequent siblings)
30 siblings, 0 replies; 35+ messages in thread
From: Saul Wold @ 2011-05-18 22:26 UTC (permalink / raw)
To: openembedded-core
From: Otavio Salvador <otavio@ossystems.com.br>
Some remotes can use HTTPS and we don't need to check the certificate
of the host so wget call is changed to avoid it.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
---
scripts/create-pull-request | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/scripts/create-pull-request b/scripts/create-pull-request
index 202d99d..9dbd55a 100755
--- a/scripts/create-pull-request
+++ b/scripts/create-pull-request
@@ -112,7 +112,7 @@ esac
# Perform a sanity test on the web URL. Issue a warning if it is not
# accessible, but do not abort as users may want to run offline.
if [ -n "$WEB_URL" ]; then
- wget -q $WEB_URL -O /dev/null
+ wget --no-check-certificate -q $WEB_URL -O /dev/null
if [ $? -ne 0 ]; then
echo "WARNING: Branch '$BRANCH' was not found on the contrib git tree."
echo " Please check your remote and branch parameter before sending."
--
1.7.3.4
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH 26/30] create-pull-request: add GitHub remote support
2011-05-18 22:26 [PATCH 00/30] 18-May-2011 Consolidated Pull Saul Wold
` (24 preceding siblings ...)
2011-05-18 22:26 ` [PATCH 25/30] create-pull-request: do not check certificate Saul Wold
@ 2011-05-18 22:26 ` Saul Wold
2011-05-18 22:26 ` [PATCH 27/30] create-pull-request: add untested oe repository support Saul Wold
` (4 subsequent siblings)
30 siblings, 0 replies; 35+ messages in thread
From: Saul Wold @ 2011-05-18 22:26 UTC (permalink / raw)
To: openembedded-core
From: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
---
scripts/create-pull-request | 7 +++++++
1 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/scripts/create-pull-request b/scripts/create-pull-request
index 9dbd55a..a9cf6f9 100755
--- a/scripts/create-pull-request
+++ b/scripts/create-pull-request
@@ -82,6 +82,10 @@ while getopts "b:chi:m:o:p:r:s:u:" OPT; do
REMOTE_REPO=$(echo $REMOTE_URL | sed "s#.*/\(.*\)#\1#")
REMOTE_URL=${REMOTE_URL/"ssh://git@"/"git://"}
;;
+ git@github.com:*)
+ REMOTE_REPO=$(echo $REMOTE_URL | sed 's#.*:\(.*\)\(\.git\)$#\1#')
+ REMOTE_URL=${REMOTE_URL/"git@github.com:"/"git://github.com/"}
+ ;;
esac
# The .git suffix is optional in the URL, drop in for the REPO
REMOTE_REPO=${REMOTE_REPO%.git}
@@ -107,6 +111,9 @@ case "$REMOTE_URL" in
*git.pokylinux.org*)
WEB_URL="http://git.pokylinux.org/cgit.cgi/$REMOTE_REPO/log/?h=$BRANCH"
;;
+ *github.com*)
+ WEB_URL="https://github.com/$REMOTE_REPO/tree/$BRANCH"
+ ;;
esac
# Perform a sanity test on the web URL. Issue a warning if it is not
--
1.7.3.4
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH 27/30] create-pull-request: add untested oe repository support
2011-05-18 22:26 [PATCH 00/30] 18-May-2011 Consolidated Pull Saul Wold
` (25 preceding siblings ...)
2011-05-18 22:26 ` [PATCH 26/30] create-pull-request: add GitHub remote support Saul Wold
@ 2011-05-18 22:26 ` Saul Wold
2011-05-18 22:26 ` [PATCH 28/30] send-pull-request: streamline git-send-email usage Saul Wold
` (3 subsequent siblings)
30 siblings, 0 replies; 35+ messages in thread
From: Saul Wold @ 2011-05-18 22:26 UTC (permalink / raw)
To: openembedded-core
From: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Cc: Otavio Salvador <otavio@ossystems.com.br>
---
scripts/create-pull-request | 7 +++++++
1 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/scripts/create-pull-request b/scripts/create-pull-request
index a9cf6f9..634a289 100755
--- a/scripts/create-pull-request
+++ b/scripts/create-pull-request
@@ -82,6 +82,10 @@ while getopts "b:chi:m:o:p:r:s:u:" OPT; do
REMOTE_REPO=$(echo $REMOTE_URL | sed "s#.*/\(.*\)#\1#")
REMOTE_URL=${REMOTE_URL/"ssh://git@"/"git://"}
;;
+ *ssh://git@git.openembedded.org*)
+ REMOTE_REPO=$(echo $REMOTE_URL | sed "s#.*/\(.*\)#\1#")
+ REMOTE_URL=${REMOTE_URL/"ssh://git@"/"git://"}
+ ;;
git@github.com:*)
REMOTE_REPO=$(echo $REMOTE_URL | sed 's#.*:\(.*\)\(\.git\)$#\1#')
REMOTE_URL=${REMOTE_URL/"git@github.com:"/"git://github.com/"}
@@ -111,6 +115,9 @@ case "$REMOTE_URL" in
*git.pokylinux.org*)
WEB_URL="http://git.pokylinux.org/cgit.cgi/$REMOTE_REPO/log/?h=$BRANCH"
;;
+ *git.openembedded.org*)
+ WEB_URL="http://cgit.openembedded.org/cgit.cgi/$REMOTE_REPO/log/?h=$BRANCH"
+ ;;
*github.com*)
WEB_URL="https://github.com/$REMOTE_REPO/tree/$BRANCH"
;;
--
1.7.3.4
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH 28/30] send-pull-request: streamline git-send-email usage
2011-05-18 22:26 [PATCH 00/30] 18-May-2011 Consolidated Pull Saul Wold
` (26 preceding siblings ...)
2011-05-18 22:26 ` [PATCH 27/30] create-pull-request: add untested oe repository support Saul Wold
@ 2011-05-18 22:26 ` Saul Wold
2011-05-18 22:26 ` [PATCH 29/30] *pull-request: add copyright, license, and descriptions Saul Wold
` (2 subsequent siblings)
30 siblings, 0 replies; 35+ messages in thread
From: Saul Wold @ 2011-05-18 22:26 UTC (permalink / raw)
To: openembedded-core
From: Darren Hart <dvhart@linux.intel.com>
The script was sending one patch at a time, which defeats the internal
confirmation mechanism of git-send-email (which would otherwise allow
the user to send all patches or abort immediately).
Rework the sending logic to use no more than two commands. Use two
commands when the cover letter is to be sent to all recipients with
the -a argument. Otherwise, send all patches via the same command.
The script duplicates git's send confirmation, eliminate that.
Reported-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Joshua Lock <josh@linux.intel.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Cc: Khem Raj <raj.khem@gmail.com>
Cc: Joshua Lock <josh@linux.intel.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
---
scripts/send-pull-request | 68 +++++++++++++++++---------------------------
1 files changed, 26 insertions(+), 42 deletions(-)
diff --git a/scripts/send-pull-request b/scripts/send-pull-request
index 21eb302..8d0bd34 100755
--- a/scripts/send-pull-request
+++ b/scripts/send-pull-request
@@ -1,6 +1,7 @@
#!/bin/bash
AUTO=0
AUTO_CL=0
+GITSOBCC=""
# Prevent environment leakage to these vars.
unset TO
@@ -59,10 +60,11 @@ while getopts "achp:t:" OPT; do
case $OPT in
a)
AUTO_CL=1
- AUTO=1
- ;;
+ # Fall through to include -c
+ ;&
c)
AUTO=1
+ GITSOBCC="--signed-off-by-cc"
;;
h)
usage
@@ -130,48 +132,30 @@ if [ -z "$TO" ] && [ -z "$AUTO_CC" ]; then
fi
-# Generate report for the user and require confirmation before sending
-cat <<EOM
-The following patches:
-$(for PATCH in $PDIR/*.patch; do echo " $PATCH"; done)
+# Convert the collected addresses into git-send-email argument strings
+export IFS=$','
+GIT_TO=$(for R in $TO; do echo -n "--to='$R' "; done)
+GIT_CC=$(for R in $AUTO_CC; do echo -n "--cc='$R' "; done)
+unset IFS
-will now be sent via the git send-email command. Git will prompt you before
-sending any email.
-EOM
-echo "Continue? [y/N] "
-read cont
-
-if [ "$cont" == "y" ] || [ "$cont" == "Y" ]; then
- ERROR=0
- export IFS=$','
- GIT_TO=$(for R in $TO; do echo -n "--to='$R' "; done)
- GIT_CC=$(for R in $AUTO_CC; do echo -n "--cc='$R' "; done)
- unset IFS
- for PATCH in $PDIR/*patch; do
- if [ $AUTO -eq 1 ]; then
- if [ $PATCH == "$CL" ] && [ $AUTO_CL -eq 1 ]; then
- # Send the cover letter to every recipient, both
- # specified as well as harvested.
- eval "git send-email $GIT_TO $GIT_CC --confirm=always --no-chain-reply-to --suppress-cc=all $PATCH"
- else
- # Send the patch to the specified recipients and
- # those git finds in this specific patch.
- eval "git send-email $GIT_TO --confirm=always --no-chain-reply-to --signed-off-by-cc $PATCH"
- fi
- else
- # Only send to the explicitly specified recipients
- eval "git send-email $GIT_TO --confirm=always --no-chain-reply-to --suppress-cc=all $PATCH"
- fi
- if [ $? -eq 1 ]; then
- ERROR=1
- fi
- done
-
- if [ $ERROR -eq 1 ]; then
- echo "ERROR: Failed to send one or more messages."
+# Handoff to git-send-email. It will perform the send confirmation.
+PATCHES=$(echo $PDIR/*.patch)
+if [ $AUTO_CL -eq 1 ]; then
+ # Send the cover letter to every recipient, both specified as well as
+ # harvested. Then remove it from the patches list.
+ eval "git send-email $GIT_TO $GIT_CC --confirm=always --no-chain-reply-to --suppress-cc=all $CL"
+ if [ $? -eq 1 ]; then
+ echo "ERROR: failed to send cover-letter with automatic recipients."
+ exit 1
fi
-else
- echo "Send aborted."
+ PATCHES=${PATCHES/"$CL"/}
fi
+# Send the patch to the specified recipients and, if -c was specified, those git
+# finds in this specific patch.
+eval "git send-email $GIT_TO --confirm=always --no-chain-reply-to $GITSOBCC $PATCHES"
+if [ $? -eq 1 ]; then
+ echo "ERROR: failed to send patches."
+ exit 1
+fi
--
1.7.3.4
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH 29/30] *pull-request: add copyright, license, and descriptions
2011-05-18 22:26 [PATCH 00/30] 18-May-2011 Consolidated Pull Saul Wold
` (27 preceding siblings ...)
2011-05-18 22:26 ` [PATCH 28/30] send-pull-request: streamline git-send-email usage Saul Wold
@ 2011-05-18 22:26 ` Saul Wold
2011-05-18 22:26 ` [PATCH 30/30] u-boot: update SRCREV to 2011.03 Saul Wold
2011-05-19 22:42 ` [PATCH 00/30] 18-May-2011 Consolidated Pull Richard Purdie
30 siblings, 0 replies; 35+ messages in thread
From: Saul Wold @ 2011-05-18 22:26 UTC (permalink / raw)
To: openembedded-core
From: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Cc: Otavio Salvador <otavio@ossystems.com.br>
---
scripts/create-pull-request | 26 ++++++++++++++++++++++++++
scripts/send-pull-request | 25 +++++++++++++++++++++++++
2 files changed, 51 insertions(+), 0 deletions(-)
diff --git a/scripts/create-pull-request b/scripts/create-pull-request
index 634a289..b808146 100755
--- a/scripts/create-pull-request
+++ b/scripts/create-pull-request
@@ -1,4 +1,30 @@
#!/bin/bash
+#
+# Copyright (c) 2010-2011, Intel Corporation.
+# All Rights Reserved
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+# the GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+
+#
+# This script is intended to be used to prepare a series of patches
+# and a cover letter in an appropriate and consistent format for
+# submission to Open Embedded and The Yocto Project, as well as to
+# related projects and layers.
+#
+
ODIR=pull-$$
RELATIVE_TO="master"
COMMIT_ID="HEAD"
diff --git a/scripts/send-pull-request b/scripts/send-pull-request
index 8d0bd34..cee9253 100755
--- a/scripts/send-pull-request
+++ b/scripts/send-pull-request
@@ -1,4 +1,29 @@
#!/bin/bash
+#
+# Copyright (c) 2010-2011, Intel Corporation.
+# All Rights Reserved
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+# the GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+
+#
+# This script is intended to be used to send a patch series prepared by the
+# create-pull-request script to Open Embedded and The Yocto Project, as well
+# as to related projects and layers.
+#
+
AUTO=0
AUTO_CL=0
GITSOBCC=""
--
1.7.3.4
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCH 30/30] u-boot: update SRCREV to 2011.03
2011-05-18 22:26 [PATCH 00/30] 18-May-2011 Consolidated Pull Saul Wold
` (28 preceding siblings ...)
2011-05-18 22:26 ` [PATCH 29/30] *pull-request: add copyright, license, and descriptions Saul Wold
@ 2011-05-18 22:26 ` Saul Wold
2011-05-19 22:42 ` [PATCH 00/30] 18-May-2011 Consolidated Pull Richard Purdie
30 siblings, 0 replies; 35+ messages in thread
From: Saul Wold @ 2011-05-18 22:26 UTC (permalink / raw)
To: openembedded-core; +Cc: Robert Berger, Yi Zhao
From: Darren Hart <dvhart@linux.intel.com>
Fixes [YOCTO 1029]
u-boot 2010.12 fails to run on the Beagleboard C4 and xM Rev A boards. Commit
55aacbc30e48f6f8a73fb989a58625e70887bc01 suggests there was a mixup during
development, as the MD5SUM change is from the 2011.03 SRCREV back to the
2010.12. Chances are a patch was never sent to update the SRCREV, leaving the
MD5SUM in a bad state.
Update the SRCREV and COPYING MD5SUM to use the 2011.03 version. Built
and tested on Beagleboard xM Rev A and Beagleboard Rev C4.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Tested-by: Jeff Osier-Mixon <jefro@jefro.net>
Cc: Jeff Osier-Mixon <jefro@jefro.net>
Cc: Yi Zhao <yi.zhao@windriver.com>
Cc: Robert Berger <pokylinux@reliableembeddedsystems.com>
Cc: Gary Thomas <gary@mlbassoc.com>
---
meta/recipes-bsp/uboot/u-boot_git.bb | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/meta/recipes-bsp/uboot/u-boot_git.bb b/meta/recipes-bsp/uboot/u-boot_git.bb
index d8c196a..c5583ff 100644
--- a/meta/recipes-bsp/uboot/u-boot_git.bb
+++ b/meta/recipes-bsp/uboot/u-boot_git.bb
@@ -1,14 +1,14 @@
require u-boot.inc
LICENSE = "GPLv2+"
-LIC_FILES_CHKSUM = "file://COPYING;md5=4c6cde5df68eff615d36789dc18edd3b \
+LIC_FILES_CHKSUM = "file://COPYING;md5=1707d6db1d42237583f50183a5651ecb \
file://README;beginline=1;endline=22;md5=3a00ef51d3fc96e9d6c1bc4708ccd3b5"
FILESDIR = "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/u-boot-git/${MACHINE}"
-SRCREV = "v2010.12"
-PV = "v2010.12+${PR}+git${SRCPV}"
-PR="r2"
+SRCREV = "v2011.03"
+PV = "v2011.03+${PR}+git${SRCPV}"
+PR="r3"
SRC_URI = "git://git.denx.de/u-boot.git;branch=master;protocol=git"
--
1.7.3.4
^ permalink raw reply related [flat|nested] 35+ messages in thread* Re: [PATCH 00/30] 18-May-2011 Consolidated Pull
2011-05-18 22:26 [PATCH 00/30] 18-May-2011 Consolidated Pull Saul Wold
` (29 preceding siblings ...)
2011-05-18 22:26 ` [PATCH 30/30] u-boot: update SRCREV to 2011.03 Saul Wold
@ 2011-05-19 22:42 ` Richard Purdie
30 siblings, 0 replies; 35+ messages in thread
From: Richard Purdie @ 2011-05-19 22:42 UTC (permalink / raw)
To: Patches and discussions about the oe-core layer
On Thu, 2011-05-19 at 12:19 -0700, Saul Wold wrote:
> This has a few core fixes to master for broken builds, utils.bbclass
> address the perl failure and qt4-tools-native address a qt4 failure.
>
> Additional this has Darren's new create/send pull request along with
> fixes for 4.6 and libc overrides.
Merged apart from:
> Dexuan Cui (1):
> package-index.bb: add support for deb and rpm.
which just needs a quick further minor tweak first (explanation sent).
Cheers,
Richard
^ permalink raw reply [flat|nested] 35+ messages in thread